applications/create_ap
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3632f29912
create_ap/README.md
oblique 81d861cb46 Reimplementation of 6a3e1d98 commit 
With the 6a3e1d98 commit NetworkManager was throwing an assertion so
we take a different approach when we create the bridge interface.
Also if the <interface-with-internet> is already a bridge interface
we skip creation.

The new approach is:

   1) Save the IPs and route table of INTERNET_IFACE
   2) If NetworkManager is running set INTERNET_IFACE as unmanaged
   3) Create BRIDGE_IFACE and add INTERNET_IFACE to it
   4) Set the previously saved IPs and route table to BRIDGE_IFACE

Better fix #19
2014-09-05 02:13:59 +03:00

2.4 KiB
Raw Blame History

Features

  • Create an AP (Access Point) at any channel.
  • Choose one of the following encryptions: WPA, WPA2, WPA/WPA2, Open (no encryption).
  • Hide your SSID.
  • IEEE 802.11n support
  • Internet sharing methods: NATed or Bridged or None (no Internet sharing).
  • Choose the AP Gateway IP (only for 'NATed' and 'None' Internet sharing methods).
  • You can create an AP with the same interface you are getting your Internet connection.
  • You can pass your SSID and password through pipe or through arguments (see examples).

Dependencies

General

  • bash (to run this script)
  • util-linux (for getopt)
  • hostapd
  • iproute2
  • iw
  • iwconfig (you only need this if 'iw' can not recognize your adapter)
  • haveged (optional)

For 'NATed' or 'None' Internet sharing method

  • dnsmasq
  • iptables

For 'Bridged' Internet sharing method

  • bridge-utils

Installation

Generic

git clone https://github.com/oblique/create_ap
cd create_ap
make install

ArchLinux (AUR)

yaourt -S create_ap

Gentoo

emerge layman
layman -o https://raw.githubusercontent.com/jorgicio/jorgicio-gentoo/master/jorgicio-repo.xml -f -a jorgicio-gentoo
emerge net-wireless/create_ap

Examples

No passphrase (open network):

create_ap wlan0 eth0 MyAccessPoint

WPA + WPA2 passphrase:

create_ap wlan0 eth0 MyAccessPoint MyPassPhrase

AP without Internet sharing:

create_ap -n wlan0 MyAccessPoint MyPassPhrase

Bridged Internet sharing:

create_ap -m bridge wlan0 eth0 MyAccessPoint MyPassPhrase

Bridged Internet sharing (pre-configured bridge interface):

create_ap -m bridge wlan0 br0 MyAccessPoint MyPassPhrase

Internet sharing from the same WiFi interface:

create_ap wlan0 wlan0 MyAccessPoint MyPassPhrase

Choose a different WiFi adapter driver

create_ap --driver rtl871xdrv wlan0 eth0 MyAccessPoint MyPassPhrase

No passphrase (open network) using pipe:

echo -e "MyAccessPoint" | create_ap wlan0 eth0

WPA + WPA2 passphrase using pipe:

echo -e "MyAccessPoint\nMyPassPhrase" | create_ap wlan0 eth0

Enable IEEE 802.11n

create_ap --ieee80211n --ht_capab '[HT40+]' wlan0 eth0 MyAccessPoint MyPassPhrase

Systemd service

Using the persistent systemd service

Start service immediately:

systemctl start create_ap

Start on boot:

systemctl enable create_ap

License

FreeBSD