create_ap/README.md

69 lines
1.7 KiB
Markdown
Raw Normal View History

2013-12-04 08:39:01 -05:00
## Features
* Create an AP (Access Point) at any channel.
* Choose one of the following encryptions: WPA, WPA2, WPA/WPA2, Open (no encryption).
* Hide your SSID.
* Internet sharing methods: NATed or Bridged or None (no Internet sharing).
* Choose the AP Gateway IP (only for 'NATed' and 'None' Internet sharing methods).
* You can create an AP with the same interface you are getting your Internet connection.
* You can pass your SSID and password through pipe or through arguments (see examples).
2013-09-28 03:45:59 -04:00
2013-12-04 08:39:01 -05:00
## Dependencies
### General
2013-09-28 03:45:59 -04:00
* bash (to run this script)
* util-linux (for getopt)
* hostapd
* iproute2
2013-12-04 08:39:01 -05:00
* iw
2013-09-28 03:45:59 -04:00
* haveged (optional)
2013-12-04 08:39:01 -05:00
### For 'nat' or 'none' Internet sharing method
* dnsmasq
* iptables
2013-09-28 02:04:52 -04:00
2013-12-04 08:39:01 -05:00
### For 'brigde' Internet sharing method
* bridge-utils
* dhclient
2013-09-28 02:04:52 -04:00
2013-12-04 08:39:01 -05:00
## Installation
###
git clone https://github.com/oblique/create_ap
cd create_ap
make install
2013-11-17 06:43:50 -05:00
2013-12-04 08:39:01 -05:00
## Examples
### No passphrase (open network):
create_ap wlan0 eth0 MyAccessPoint
2013-11-17 06:43:50 -05:00
2013-09-28 02:04:52 -04:00
### WPA + WPA2 passphrase:
2013-12-04 08:39:01 -05:00
create_ap wlan0 eth0 MyAccessPoint MyPassPhrase
2013-09-28 02:04:52 -04:00
2013-12-04 08:39:01 -05:00
### AP without Internet sharing:
create_ap -n wlan0 MyAccessPoint MyPassPhrase
2013-09-28 02:04:52 -04:00
2013-12-04 08:39:01 -05:00
### Bridged Internet sharing:
create_ap -m bridge wlan0 eth0 MyAccessPoint MyPassPhrase
2013-11-17 06:43:50 -05:00
2013-12-04 08:39:01 -05:00
### Internet sharing from the same WiFi interface:
create_ap wlan0 wlan0 MyAccessPoint MyPassPhrase
2013-11-17 06:43:50 -05:00
2013-12-04 08:39:01 -05:00
### No passphrase (open network) using pipe:
echo -e "MyAccessPoint" | create_ap wlan0 eth0
2013-09-28 02:04:52 -04:00
2013-12-04 08:39:01 -05:00
### WPA + WPA2 passphrase using pipe:
echo -e "MyAccessPoint\nMyPassPhrase" | create_ap wlan0 eth0
2013-11-17 06:43:50 -05:00
## Systemd service
Using the persistent [systemd](https://wiki.archlinux.org/index.php/systemd#Basic_systemctl_usage) service
### Start service immediately:
2013-12-04 08:39:01 -05:00
systemctl start create_ap
### Start on boot:
2013-12-04 08:39:01 -05:00
systemctl enable create_ap
## License
FreeBSD