Update README file

README.md

@@ -1,46 +1,69 @@
-## Dependencies
+## Features
+* Create an AP (Access Point) at any channel.
+* Choose one of the following encryptions: WPA, WPA2, WPA/WPA2, Open (no encryption).
+* Hide your SSID.
+* Internet sharing methods: NATed or Bridged or None (no Internet sharing).
+* Choose the AP Gateway IP (only for 'NATed' and 'None' Internet sharing methods).
+* You can create an AP with the same interface you are getting your Internet connection.
+* You can pass your SSID and password through pipe or through arguments (see examples).
 
+
+## Dependencies
+### General
 * bash (to run this script)
 * util-linux (for getopt)
 * hostapd
-* dnsmasq
-* iptables
 * iproute2
+* iw
 * haveged (optional)
 
+### For 'nat' or 'none' Internet sharing method
+* dnsmasq
+* iptables
+
+### For 'brigde' Internet sharing method
+* bridge-utils
+* dhclient
+
+
+## Installation
+###
+    git clone https://github.com/oblique/create_ap
+    cd create_ap
+    make install
+
+
 ## Examples
-
 ### No passphrase (open network):
-
-    ./create_ap wlan0 eth0 MyAccessPoint
-
-OR
-
-    echo -e "MyAccessPoint" | ./create_ap wlan0 eth0
+    create_ap wlan0 eth0 MyAccessPoint
 
 ### WPA + WPA2 passphrase:
-
-    ./create_ap wlan0 eth0 MyAccessPoint MyPassPhrase
-
-OR
-
-    echo -e "MyAccessPoint\nMyPassPhrase" | ./create_ap wlan0 eth0
+    create_ap wlan0 eth0 MyAccessPoint MyPassPhrase
 
 ### AP without Internet sharing:
+    create_ap -n wlan0 MyAccessPoint MyPassPhrase
 
-    ./create_ap -n wlan0 MyAccessPoint MyPassPhrase
+### Bridged Internet sharing:
+    create_ap -m bridge wlan0 eth0 MyAccessPoint MyPassPhrase
 
-OR
+### Internet sharing from the same WiFi interface:
+    create_ap wlan0 wlan0 MyAccessPoint MyPassPhrase
+
+### No passphrase (open network) using pipe:
+    echo -e "MyAccessPoint" | create_ap wlan0 eth0
+
+### WPA + WPA2 passphrase using pipe:
+    echo -e "MyAccessPoint\nMyPassPhrase" | create_ap wlan0 eth0
 
-    echo -e "MyAccessPoint\nMyPassPhrase" | ./create_ap -n wlan0
 
 ## Systemd service
 Using the persistent [systemd](https://wiki.archlinux.org/index.php/systemd#Basic_systemctl_usage) service
-### Install:
-    # cp create_ap.service /etc/systemd/system
-
 ### Start service immediately:
-    # systemctl start create_ap
+    systemctl start create_ap
 
 ### Start on boot:
-    # systemctl enable create_ap
+    systemctl enable create_ap
+
+
+## License
+FreeBSD