vim-fugitive/doc/fugitive.txt

*fugitive.txt*  A Git wrapper so awesome, it should be illegal

Author:  Tim Pope <http://tpo.pe/>
License: Same terms as Vim itself (see |license|)

This plugin is only available if 'compatible' is not set.

INTRODUCTION                                    *fugitive*

Whenever you edit a file from a Git repository, a set of commands is defined
that serve as a gateway to Git.

COMMANDS                                        *fugitive-commands*

These commands are local to the buffers in which they work (generally, buffers
that are part of Git repositories).

                                                *fugitive-:Git*
:Git [args]             Run an arbitrary git command. Similar to :!git [args]
                        but chdir to the repository tree first.

                                                *fugitive-:Git!*
:Git! [args]            Like |:Git|, but capture the output into a temp file,
                        and edit that temp file.

                                                *fugitive-:Gcd*
:Gcd [directory]        |:cd| relative to the repository.

                                                *fugitive-:Glcd*
:Glcd [directory]       |:lcd| relative to the repository.

                                                *fugitive-:Gstatus*
:Gstatus                Bring up the output of git-status in the preview
                        window.  The following maps, which work on the cursor
                        line file where sensible, are provided:

                        <C-N> next file
                        <C-P> previous file
                        <CR>  |:Gedit|
                        -     |:Git| add
                        -     |:Git| reset (staged files)
                        cA    |:Gcommit| --amend --reuse-message=HEAD
                        ca    |:Gcommit| --amend
                        cc    |:Gcommit|
                        cva   |:Gcommit| --amend --verbose
                        cvc   |:Gcommit| --verbose
                        D     |:Gdiff|
                        ds    |:Gsdiff|
                        dp    |:Git!| diff (p for patch; use :Gw to apply)
                        dp    |:Git| add --intent-to-add (untracked files)
                        dv    |:Gvdiff|
                        O     |:Gtabedit|
                        o     |:Gsplit|
                        p     |:Git| add --patch
                        p     |:Git| reset --patch (staged files)
                        q     close status
                        R     reload status
                        S     |:Gvsplit|

                                                *fugitive-:Gcommit*
:Gcommit [args]         A wrapper around git-commit.  If there is nothing
                        to commit, |:Gstatus| is called instead.  Unless the
                        arguments given would skip the invocation of an editor
                        (e.g., -m), a split window will be used to obtain a
                        commit message.  Write and close that window (:wq or
                        |:Gwrite|) to finish the commit.  Unlike when running
                        the actual git-commit command, it is possible (but
                        unadvisable) to muck with the index with commands like
                        git-add and git-reset while a commit message is
                        pending.

                                                *fugitive-:Ggrep*
:Ggrep [args]           |:grep| with git-grep as 'grepprg'.

                                                *fugitive-:Glgrep*
:Glgrep [args]          |:lgrep| with git-grep as 'grepprg'.

                                                *fugitive-:Glog*
:Glog [args]            Load all previous revisions of the current file into
                        the quickfix list.  Additional git-log arguments can
                        be given (for example, --reverse).  If "--" appears as
                        an argument, no file specific filtering is done, and
                        previous commits rather than previous file revisions
                        are loaded.

                                                *fugitive-:Gllog*
:Gllog [args]           Like |:Glog|, but use the location list instead of the
                        quickfix list.

                                        *fugitive-:Gedit* *fugitive-:Ge*
:Gedit [revision]       |:edit| a |fugitive-revision|.

                                                *fugitive-:Gsplit*
:Gsplit [revision]      |:split| a |fugitive-revision|.

                                                *fugitive-:Gvsplit*
:Gvsplit [revision]     |:vsplit| a |fugitive-revision|.

                                                *fugitive-:Gtabedit*
:Gtabedit [revision]    |:tabedit| a |fugitive-revision|.

                                                *fugitive-:Gpedit*
:Gpedit [revision]      |:pedit| a |fugitive-revision|.

:Gsplit! [args]                 *fugitive-:Gsplit!* *fugitive-:Gvsplit!*
:Gvsplit! [args]                *fugitive-:Gtabedit!* *fugitive-:Gpedit!*
:Gtabedit! [args]       Like |:Git!|, but open the resulting temp file in a
:Gpedit! [args]         split, tab, or preview window.

                                                *fugitive-:Gread*
:Gread [revision]       Empty the buffer and |:read| a |fugitive-revision|.
                        When the argument is omitted, this is similar to
                        git-checkout on a work tree file or git-add on a stage
                        file, but without writing anything to disk.

:{range}Gread [revision]
                        |:read| in a |fugitive-revision| after {range}.

                                                *fugitive-:Gread!*
:Gread! [args]          Empty the buffer and |:read| the output of a Git
                        command.  For example, :Gread! show HEAD:%.

:{range}Gread! [args]  |:read| the output of a Git command after {range}.

                                        *fugitive-:Gw* *fugitive-:Gwrite*
:Gwrite                 Write to the current file's path and stage the results.
                        When run in a work tree file, it is effectively git
                        add.  Elsewhere, it is effectively git-checkout.  A
                        great deal of effort is expended to behave sensibly
                        when the work tree or index version of the file is
                        open in another buffer.

:Gwrite {path}          You can give |:Gwrite| an explicit path of where in
                        the work tree to write.  You can also give a path like
                        :0:foo.txt or even :0 to write to just that stage in
                        the index.

                                                *fugitive-:Gwq*
:Gwq [path]             Like |:Gwrite| followed by |:quit| if the write
                        succeeded.

:Gwq! [path]            Like |:Gwrite|! followed by |:quit|! if the write
                        succeeded.

                                                *fugitive-:Gdiff*
:Gdiff [revision]       Perform a |vimdiff| against the current file in the
                        given revision.  With no argument, the version in the
                        index is used (which means a three-way diff during a
                        merge conflict, making it a git-mergetool
                        alternative).  The newer of the two files is placed
                        to the right.  Use |do| and |dp| and write to the
                        index file to simulate "git add --patch".

                                                *fugitive-:Gsdiff*
:Gsdiff [revision]      Like |:Gdiff|, but split horizontally.

                                                *fugitive-:Gvdiff*
:Gvdiff [revision]      Identical to |:Gdiff|.  For symmetry with |:Gsdiff|.

                                                *fugitive-:Gmove*
:Gmove {destination}    Wrapper around git-mv that renames the buffer
                        afterward.  The destination is relative to the current
                        directory except when started with a /, in which case
                        it is relative to the work tree.  Add a ! to pass -f.

                                                *fugitive-:Gremove*
:Gremove                Wrapper around git-rm that deletes the buffer
                        afterward.  When invoked in an index file, --cached is
                        passed.  Add a ! to pass -f and forcefully discard the
                        buffer.

                                                *fugitive-:Gblame*
:Gblame [flags]         Run git-blame on the file and open the results in a
                        scroll bound vertical split.  Press enter on a line to
                        reblame the file as it was in that commit.  You can
                        give any of ltfnsewMC as flags and they will be passed
                        along to git-blame.  The following maps, which work on
                        the cursor line commit where sensible, are provided:

                        A     resize to end of author column
                        C     resize to end of commit column
                        D     resize to end of date/time column
                        q     close blame and return to blamed window
                        gq    q, then |:Gedit| to return to work tree version
                        i     q, then open commit
                        o     open commit in horizontal split
                        O     open commit in new tab
                        -     reblame at commit
                        ~     reblame at [count]th first grandparent
                        P     reblame at [count]th parent (like HEAD^[count])

:[range]Gblame [flags]  Run git-blame on the given range.

                                                *fugitive-:Gbrowse*
:[range]Gbrowse         If the remote for the current branch is on GitHub,
                        open the current file, blob, tree, commit, or tag
                        (with git-web--browse) on GitHub.  Otherwise, open the
                        current file, blob, tree, commit, or tag in
                        git-instaweb (if you have issues, verify you can run
                        "git instaweb" from a terminal).  If a range is given,
                        it is appropriately appended to the URL as an anchor.

                        To use with GitHub FI, point g:fugitive_github_domains
                        at a list of domains:
>
                        let g:fugitive_github_domains = ['https://example.com']
~
:[range]Gbrowse!        Like :Gbrowse, but put the URL on the clipboard rather
                        than opening it.

:[range]Gbrowse {revision}
                        Like :Gbrowse, but for a given |fugitive-revision|.  A
                        useful value here is -, which ties the URL to the
                        latest commit rather than a volatile branch.

:[range]Gbrowse [...]@{remote}
                        Force using the given remote rather than the remote
                        for the current branch.  The remote is used to
                        determine which GitHub repository to link to.

MAPPINGS                                        *fugitive-mappings*

These maps are available everywhere.

                                                *fugitive-c_CTRL-R_CTRL-G*
<C-R><C-G>              On the command line, recall the path to the current
                        object (that is, a representation of the object
                        recognized by |:Gedit|).

                                                *fugitive-y_CTRL-G*
["x]y<C-G>              Yank the commit SHA and path to the current object.

These maps are available in Git objects.

                                                *fugitive-<CR>*
<CR>                    Jump to the revision under the cursor.

                                                *fugitive-o*
o                       Jump to the revision under the cursor in a new split.

                                                *fugitive-S*
S                       Jump to the revision under the cursor in a new
                        vertical split.

                                                *fugitive-O*
O                       Jump to the revision under the cursor in a new tab.

                                                *fugitive--*
-                       Go to the tree containing the current tree or blob.

                                                *fugitive-~*
~                       Go to the current file in the [count]th first
                        ancestor.

                                                *fugitive-P*
P                       Go to the current file in the [count]th parent.

                                                *fugitive-C*
C                       Go to the commit containing the current file.

                                                *fugitive-a*
a                       Show the current tag, commit, or tree in an alternate
                        format.

SPECIFYING REVISIONS                            *fugitive-revision*

Fugitive revisions are similar to Git revisions as defined in the "SPECIFYING
REVISIONS" section in the git-rev-parse man page.  For commands that accept an
optional revision, the default is the file in the index for work tree files
and the work tree file for everything else.  Example revisions follow.

Revision        Meaning ~
HEAD            .git/HEAD
master          .git/refs/heads/master
HEAD^{}         The commit referenced by HEAD
HEAD^           The parent of the commit referenced by HEAD
HEAD:           The tree referenced by HEAD
/HEAD           The file named HEAD in the work tree
Makefile        The file named Makefile in the work tree
HEAD^:Makefile  The file named Makefile in the parent of HEAD
:Makefile       The file named Makefile in the index (writable)
-               The current file in HEAD
^               The current file in the previous commit
~3              The current file 3 commits ago
:               .git/index (Same as |:Gstatus|)
:0              The current file in the index
:1              The current file's common ancestor during a conflict
:2              The current file in the target branch during a conflict
:3              The current file in the merged branch during a conflict
:/foo           The most recent commit with "foo" in the message

STATUSLINE                                      *fugitive-statusline*

                                                *fugitive#statusline()*
Add %{fugitive#statusline()} to your statusline to get an indicator including
the current branch and the currently edited file's commit.  If you don't have
a statusline, this one matches the default when 'ruler' is set:
>
    set statusline=%<%f\ %h%m%r%{fugitive#statusline()}%=%-14.(%l,%c%V%)\ %P
<
                                                *fugitive#head(...)*
Use fugitive#head() to return the name of the current branch. If the current
HEAD is detached, fugitive#head() will return the empty string, unless the
optional argument is given, in which case the hash of the current commit will
be truncated to the given number of characters.

ABOUT                                           *fugitive-about*

Grab the latest version or report a bug on GitHub:

http://github.com/tpope/vim-fugitive

 vim:tw=78:et:ft=help:norl:
Update tag line 2010-02-14 14:16:30 -05:00			`fugitive.txt A Git wrapper so awesome, it should be illegal`
Initial commit 2009-10-10 19:47:14 -04:00
Reference homepage not email 2011-08-06 16:55:57 -04:00			`Author: Tim Pope <http://tpo.pe/>`
Initial commit 2009-10-10 19:47:14 -04:00			`License: Same terms as Vim itself (see \|license\|)`

			`This plugin is only available if 'compatible' is not set.`

			`INTRODUCTION fugitive`

Consolidate duplication in help and README 2011-08-07 18:53:59 -04:00			`Whenever you edit a file from a Git repository, a set of commands is defined`
			`that serve as a gateway to Git.`
Initial commit 2009-10-10 19:47:14 -04:00
			`COMMANDS fugitive-commands`

			`These commands are local to the buffers in which they work (generally, buffers`
			`that are part of Git repositories).`

			`fugitive-:Git`
			`:Git [args] Run an arbitrary git command. Similar to :!git [args]`
			`but chdir to the repository tree first.`

Add :Git! et al. for loading output into a buffer 2011-08-19 02:43:31 -04:00			`fugitive-:Git!`
			`:Git! [args] Like \|:Git\|, but capture the output into a temp file,`
			`and edit that temp file.`

Initial commit 2009-10-10 19:47:14 -04:00			`fugitive-:Gcd`
			`:Gcd [directory] \|:cd\| relative to the repository.`

			`fugitive-:Glcd`
			`:Glcd [directory] \|:lcd\| relative to the repository.`

Add :Gstatus with "-" map to stage and unstage 2009-10-19 22:11:40 -04:00			`fugitive-:Gstatus`
Consistently use - when talking about git commands 2010-01-11 22:59:19 -05:00			`:Gstatus Bring up the output of git-status in the preview`
Document :Gstatus maps in tabular form 2011-08-19 15:01:37 -04:00			`window. The following maps, which work on the cursor`
			`line file where sensible, are provided:`

			`<C-N> next file`
			`<C-P> previous file`
			`<CR> \|:Gedit\|`
			`- \|:Git\| add`
			`- \|:Git\| reset (staged files)`
Fix some typos 2012-04-10 05:22:30 -04:00			`cA \|:Gcommit\| --amend --reuse-message=HEAD`
			`ca \|:Gcommit\| --amend`
Replace :Gstatus cv with cva and cvc My rebuttal to #263. 2012-10-22 16:37:42 -04:00			`cc \|:Gcommit\|`
			`cva \|:Gcommit\| --amend --verbose`
			`cvc \|:Gcommit\| --verbose`
Document :Gstatus maps in tabular form 2011-08-19 15:01:37 -04:00			`D \|:Gdiff\|`
			`ds \|:Gsdiff\|`
`:Gwrite` in a patch to apply it Closes #106. 2011-09-08 17:12:41 -04:00			`dp \|:Git!\| diff (p for patch; use :Gw to apply)`
Map dp to show diff in :Gstatus Closes #101 2011-08-19 15:13:44 -04:00			`dp \|:Git\| add --intent-to-add (untracked files)`
Document :Gstatus maps in tabular form 2011-08-19 15:01:37 -04:00			`dv \|:Gvdiff\|`
			`O \|:Gtabedit\|`
			`o \|:Gsplit\|`
Use long options in :Gstatus help 2011-08-19 18:18:36 -04:00			`p \|:Git\| add --patch`
			`p \|:Git\| reset --patch (staged files)`
Document :Gstatus maps in tabular form 2011-08-19 15:01:37 -04:00			`q close status`
			`R reload status`
Add an `S` mapping for vertical splits from :Gstatus 2012-03-26 00:02:08 -04:00			`S \|:Gvsplit\|`
Add :Gcommit 2010-01-09 23:31:22 -05:00
			`fugitive-:Gcommit`
			`:Gcommit [args] A wrapper around git-commit. If there is nothing`
			`to commit, \|:Gstatus\| is called instead. Unless the`
			`arguments given would skip the invocation of an editor`
			`(e.g., -m), a split window will be used to obtain a`
			`commit message. Write and close that window (:wq or`
			`\|:Gwrite\|) to finish the commit. Unlike when running`
			`the actual git-commit command, it is possible (but`
			`unadvisable) to muck with the index with commands like`
			`git-add and git-reset while a commit message is`
			`pending.`
Add :Gstatus with "-" map to stage and unstage 2009-10-19 22:11:40 -04:00
Initial commit 2009-10-10 19:47:14 -04:00			`fugitive-:Ggrep`
			`:Ggrep [args] \|:grep\| with git-grep as 'grepprg'.`

:Glgrep and :Gllog 2012-04-05 12:25:24 -04:00			`fugitive-:Glgrep`
			`:Glgrep [args] \|:lgrep\| with git-grep as 'grepprg'.`

Initial commit 2009-10-10 19:47:14 -04:00			`fugitive-:Glog`
Pass :Glog arguments to git-log 2009-11-14 23:47:17 -05:00			`:Glog [args] Load all previous revisions of the current file into`
			`the quickfix list. Additional git-log arguments can`
			`be given (for example, --reverse). If "--" appears as`
			`an argument, no file specific filtering is done, and`
:Glgrep and :Gllog 2012-04-05 12:25:24 -04:00			`previous commits rather than previous file revisions`
			`are loaded.`

			`fugitive-:Gllog`
			`:Gllog [args] Like \|:Glog\|, but use the location list instead of the`
			`quickfix list.`
Initial commit 2009-10-10 19:47:14 -04:00
			`fugitive-:Gedit fugitive-:Ge`
			`:Gedit [revision] \|:edit\| a \|fugitive-revision\|.`

			`fugitive-:Gsplit`
			`:Gsplit [revision] \|:split\| a \|fugitive-revision\|.`

			`fugitive-:Gvsplit`
			`:Gvsplit [revision] \|:vsplit\| a \|fugitive-revision\|.`

			`fugitive-:Gtabedit`
Add :Git! et al. for loading output into a buffer 2011-08-19 02:43:31 -04:00			`:Gtabedit [revision] \|:tabedit\| a \|fugitive-revision\|.`
Initial commit 2009-10-10 19:47:14 -04:00
			`fugitive-:Gpedit`
Add :Git! et al. for loading output into a buffer 2011-08-19 02:43:31 -04:00			`:Gpedit [revision] \|:pedit\| a \|fugitive-revision\|.`

			`:Gsplit! [args] fugitive-:Gsplit! fugitive-:Gvsplit!`
			`:Gvsplit! [args] fugitive-:Gtabedit! fugitive-:Gpedit!`
			`:Gtabedit! [args] Like \|:Git!\|, but open the resulting temp file in a`
			`:Gpedit! [args] split, tab, or preview window.`
Initial commit 2009-10-10 19:47:14 -04:00
			`fugitive-:Gread`
:Gread is now equivalent to :Gread! 2010-01-11 15:21:43 -05:00			`:Gread [revision] Empty the buffer and \|:read\| a \|fugitive-revision\|.`
Consistently use - when talking about git commands 2010-01-11 22:59:19 -05:00			`When the argument is omitted, this is similar to`
			`git-checkout on a work tree file or git-add on a stage`
:Gread is now equivalent to :Gread! 2010-01-11 15:21:43 -05:00			`file, but without writing anything to disk.`

Deprecate :Gread with no range or bang In the future, :Gread will become equivalent to :Gread!, and :.Gread will be required in order to read into a buffer without replacing it. 2010-01-09 19:12:45 -05:00			`:{range}Gread [revision]`
:Gread is now equivalent to :Gread! 2010-01-11 15:21:43 -05:00			`\|:read\| in a \|fugitive-revision\| after {range}.`
Initial commit 2009-10-10 19:47:14 -04:00
Add :Git! et al. for loading output into a buffer 2011-08-19 02:43:31 -04:00			`fugitive-:Gread!`
			`:Gread! [args] Empty the buffer and \|:read\| the output of a Git`
			`command. For example, :Gread! show HEAD:%.`

			`:{range}Gread! [args] \|:read\| the output of a Git command after {range}.`

Send :help :Gw to the right place 2012-12-08 16:45:31 -05:00			`fugitive-:Gw fugitive-:Gwrite`
Write to index and work tree with :Gwrite 2009-10-14 23:15:03 -04:00			`:Gwrite Write to the current file's path and stage the results.`
			`When run in a work tree file, it is effectively git`
Consistently use - when talking about git commands 2010-01-11 22:59:19 -05:00			`add. Elsewhere, it is effectively git-checkout. A`
Write to index and work tree with :Gwrite 2009-10-14 23:15:03 -04:00			`great deal of effort is expended to behave sensibly`
			`when the work tree or index version of the file is`
			`open in another buffer.`

			`:Gwrite {path} You can give \|:Gwrite\| an explicit path of where in`
			`the work tree to write. You can also give a path like`
			`:0:foo.txt or even :0 to write to just that stage in`
			`the index.`

Implement :Gwq 2011-02-27 13:58:05 -05:00			`fugitive-:Gwq`
			`:Gwq [path] Like \|:Gwrite\| followed by \|:quit\| if the write`
			`succeeded.`

			`:Gwq! [path] Like \|:Gwrite\|! followed by \|:quit\|! if the write`
			`succeeded.`

Initial commit 2009-10-10 19:47:14 -04:00			`fugitive-:Gdiff`
:Gdiff does a three-way during a conflict 2009-10-14 23:26:10 -04:00			`:Gdiff [revision] Perform a \|vimdiff\| against the current file in the`
			`given revision. With no argument, the version in the`
			`index is used (which means a three-way diff during a`
Consistently use - when talking about git commands 2010-01-11 22:59:19 -05:00			`merge conflict, making it a git-mergetool`
In :Gdiff, newest file is shown on right 2010-01-30 00:31:10 -05:00			`alternative). The newer of the two files is placed`
			`to the right. Use \|do\| and \|dp\| and write to the`
Consistently use - when talking about git commands 2010-01-11 22:59:19 -05:00			`index file to simulate "git add --patch".`
Initial commit 2009-10-10 19:47:14 -04:00
Document :Gsdiff and :Gvdiff 2011-02-27 10:47:13 -05:00			`fugitive-:Gsdiff`
			`:Gsdiff [revision] Like \|:Gdiff\|, but split horizontally.`

			`fugitive-:Gvdiff`
			`:Gvdiff [revision] Identical to \|:Gdiff\|. For symmetry with \|:Gsdiff\|.`
Document `:Gdiff!` 2010-07-25 21:53:00 -04:00
Initial commit 2009-10-10 19:47:14 -04:00			`fugitive-:Gmove`
			`:Gmove {destination} Wrapper around git-mv that renames the buffer`
			`afterward. The destination is relative to the current`
			`directory except when started with a /, in which case`
			`it is relative to the work tree. Add a ! to pass -f.`

			`fugitive-:Gremove`
			`:Gremove Wrapper around git-rm that deletes the buffer`
			`afterward. When invoked in an index file, --cached is`
			`passed. Add a ! to pass -f and forcefully discard the`
			`buffer.`

			`fugitive-:Gblame`
Pass :Gblame flags along to git-blame 2010-03-05 22:28:53 -05:00			`:Gblame [flags] Run git-blame on the file and open the results in a`
Initial commit 2009-10-10 19:47:14 -04:00			`scroll bound vertical split. Press enter on a line to`
Pass :Gblame flags along to git-blame 2010-03-05 22:28:53 -05:00			`reblame the file as it was in that commit. You can`
Update :Gblame supported options 2012-10-09 16:24:31 -04:00			`give any of ltfnsewMC as flags and they will be passed`
Show :Gblame maps in tabular form 2011-10-01 04:43:25 -04:00			`along to git-blame. The following maps, which work on`
			`the cursor line commit where sensible, are provided:`

Add maps for resizing blame window 2012-06-22 19:44:26 -04:00			`A resize to end of author column`
			`C resize to end of commit column`
			`D resize to end of date/time column`
Show :Gblame maps in tabular form 2011-10-01 04:43:25 -04:00			`q close blame and return to blamed window`
			`gq q, then \|:Gedit\| to return to work tree version`
			`i q, then open commit`
			`o open commit in horizontal split`
			`O open commit in new tab`
Use - not <CR> for reblame The plan is to ultimately reclaim <CR> for closing the blame, then jumping to the commit. 2012-03-28 20:35:47 -04:00			`- reblame at commit`
Show :Gblame maps in tabular form 2011-10-01 04:43:25 -04:00			`~ reblame at [count]th first grandparent`
			`P reblame at [count]th parent (like HEAD^[count])`
Document mappings in :Gblame Also document q in :Gstatus. 2011-08-07 00:09:53 -04:00
Pass :Gblame flags along to git-blame 2010-03-05 22:28:53 -05:00			`:[range]Gblame [flags] Run git-blame on the given range.`
Initial commit 2009-10-10 19:47:14 -04:00
Provide :Gbrowse to open code in web browser 2011-02-21 00:11:47 -05:00			`fugitive-:Gbrowse`
			`:[range]Gbrowse If the remote for the current branch is on GitHub,`
			`open the current file, blob, tree, commit, or tag`
			`(with git-web--browse) on GitHub. Otherwise, open the`
Fix typo: "flie" => "file" 2011-02-22 11:01:47 -05:00			`current file, blob, tree, commit, or tag in`
Provide :Gbrowse to open code in web browser 2011-02-21 00:11:47 -05:00			`git-instaweb (if you have issues, verify you can run`
			`"git instaweb" from a terminal). If a range is given,`
			`it is appropriately appended to the URL as an anchor.`

Support GitHub FI 2012-03-14 16:27:46 -04:00			`To use with GitHub FI, point g:fugitive_github_domains`
			`at a list of domains:`
			`>`
Allow :Gbrowse on HTTP GitHub FI Closes #272. 2012-11-18 22:43:04 -05:00			`let g:fugitive_github_domains = ['https://example.com']`
Support GitHub FI 2012-03-14 16:27:46 -04:00			`~`
Provide :Gbrowse to open code in web browser 2011-02-21 00:11:47 -05:00			`:[range]Gbrowse! Like :Gbrowse, but put the URL on the clipboard rather`
			`than opening it.`

Handle arbitrary :Gbrowse revision 2011-02-26 15:40:59 -05:00			`:[range]Gbrowse {revision}`
			`Like :Gbrowse, but for a given \|fugitive-revision\|. A`
			`useful value here is -, which ties the URL to the`
			`latest commit rather than a volatile branch.`

			`:[range]Gbrowse [...]@{remote}`
Provide :Gbrowse to open code in web browser 2011-02-21 00:11:47 -05:00			`Force using the given remote rather than the remote`
			`for the current branch. The remote is used to`
			`determine which GitHub repository to link to.`

Initial commit 2009-10-10 19:47:14 -04:00			`MAPPINGS fugitive-mappings`

Use y<C-G> to yank the current object's path In response to #165. 2012-03-10 17:32:08 -05:00			`These maps are available everywhere.`

			`fugitive-c_CTRL-R_CTRL-G`
			`<C-R><C-G> On the command line, recall the path to the current`
			`object (that is, a representation of the object`
			`recognized by \|:Gedit\|).`

			`fugitive-y_CTRL-G`
			`["x]y<C-G> Yank the commit SHA and path to the current object.`

Initial commit 2009-10-10 19:47:14 -04:00			`These maps are available in Git objects.`

			`fugitive-<CR>`
			`<CR> Jump to the revision under the cursor.`

			`fugitive-o`
			`o Jump to the revision under the cursor in a new split.`

Add an `S` mapping for vertical splits from :Gstatus 2012-03-26 00:02:08 -04:00			`fugitive-S`
			`S Jump to the revision under the cursor in a new`
			`vertical split.`

Initial commit 2009-10-10 19:47:14 -04:00			`fugitive-O`
			`O Jump to the revision under the cursor in a new tab.`

Map - to go up a directory 2012-04-07 16:14:51 -04:00			`fugitive--`
			`- Go to the tree containing the current tree or blob.`

Initial commit 2009-10-10 19:47:14 -04:00			`fugitive-~`
			`~ Go to the current file in the [count]th first`
			`ancestor.`

			`fugitive-P`
			`P Go to the current file in the [count]th parent.`

			`fugitive-C`
			`C Go to the commit containing the current file.`

			`fugitive-a`
			`a Show the current tag, commit, or tree in an alternate`
			`format.`

			`SPECIFYING REVISIONS fugitive-revision`

			`Fugitive revisions are similar to Git revisions as defined in the "SPECIFYING`
			`REVISIONS" section in the git-rev-parse man page. For commands that accept an`
			`optional revision, the default is the file in the index for work tree files`
			`and the work tree file for everything else. Example revisions follow.`

			`Revision Meaning ~`
			`HEAD .git/HEAD`
			`master .git/refs/heads/master`
			`HEAD^{} The commit referenced by HEAD`
			`HEAD^ The parent of the commit referenced by HEAD`
			`HEAD: The tree referenced by HEAD`
			`/HEAD The file named HEAD in the work tree`
			`Makefile The file named Makefile in the work tree`
			`HEAD^:Makefile The file named Makefile in the parent of HEAD`
			`:Makefile The file named Makefile in the index (writable)`
			`- The current file in HEAD`
			`^ The current file in the previous commit`
			`~3 The current file 3 commits ago`
Add :Gstatus with "-" map to stage and unstage 2009-10-19 22:11:40 -04:00			`: .git/index (Same as \|:Gstatus\|)`
Initial commit 2009-10-10 19:47:14 -04:00			`:0 The current file in the index`
			`:1 The current file's common ancestor during a conflict`
			`:2 The current file in the target branch during a conflict`
			`:3 The current file in the merged branch during a conflict`
			`:/foo The most recent commit with "foo" in the message`

Add optional statusline indicator 2010-02-02 23:46:04 -05:00			`STATUSLINE fugitive-statusline`

			`fugitive#statusline()`
			`Add %{fugitive#statusline()} to your statusline to get an indicator including`
			`the current branch and the currently edited file's commit. If you don't have`
			`a statusline, this one matches the default when 'ruler' is set:`
			`>`
			`set statusline=%<%f\ %h%m%r%{fugitive#statusline()}%=%-14.(%l,%c%V%)\ %P`
			`<`
Add fugitive#head() and fugitive#repo().head() fugitive#head() returns the name of the current branch. If the current HEAD is detached, fugitive#head() will return the empty string, unless the optional 'len' argument is given, in which case the hash of the current HEAD will be truncated to 'len' characters. This makes should make life easier for people who don't want to use the default provided by fugitive#statusline() 2012-04-17 15:28:11 -04:00			`fugitive#head(...)`
			`Use fugitive#head() to return the name of the current branch. If the current`
			`HEAD is detached, fugitive#head() will return the empty string, unless the`
			`optional argument is given, in which case the hash of the current commit will`
			`be truncated to the given number of characters.`

Initial commit 2009-10-10 19:47:14 -04:00			`ABOUT fugitive-about`

Fix GitHub capitalization 2010-02-15 13:58:36 -05:00			`Grab the latest version or report a bug on GitHub:`
Initial commit 2009-10-10 19:47:14 -04:00
			`http://github.com/tpope/vim-fugitive`

			`vim:tw=78:et:ft=help:norl:`