203a667660
Fix grammar and spelling in helpfile |
||
---|---|---|
autoload | ||
doc | ||
plugin | ||
t | ||
.gitignore | ||
.travis.yml | ||
Gemfile | ||
Rakefile | ||
README.md | ||
TODO.md |
Vim motion on speed!
About the authors
- Kim Silkebækken (https://github.com/Lokaltog)
- haya14busa (https://github.com/haya14busa) (since version 2.0)
The EasyMotion project, revived!
Starting from version 2.0 haya14busa will be taking over the project from Lokaltog. He's improved the default motions, implemented many useful new features, and fixed some bugs.
EasyMotion is now completely
- Well-behaved: It's consistent with the default motions of Vim and works well in all modes. And it now supports repeating with the dot operator.
- Configurable. You can easily configure its behavior and map it to any key you want.
Even though some default behaviors were modified and many new features were added, I carefully considered backward compatibility. So those of you updating from older versions can do so without worry and start benefitting immediately from all the new features!
Introduction
EasyMotion provides a much simpler way to use some motions in vim. It
takes the <number>
out of <number>w
or <number>f{char}
by
highlighting all possible choices and allowing you to press one key to
jump directly to the target.
When one of the available motions is triggered, all visible text preceding or following the cursor is faded, and motion targets are highlighted.
EasyMotion is triggered by the provided mappings. This readme only covers the
basics; please refer to
:help easymotion.txt
to see all of the available mappings.
Important notes
Default bindings
The default leader has been changed to <Leader><Leader>
to avoid
conflicts with other plugins you may have installed. This can easily be
changed back to pre-1.3 behavior by rebinding the leader in your vimrc:
map <Leader> <Plug>(easymotion-prefix)
All motions will then be triggered with <Leader>
by default, e.g.
<Leader>s
, <Leader>gE
.
For users of the forked version
SelectLines and SelectPhrase are not actually motions, so I've moved them into separate plugins.
- https://github.com/haya14busa/vim-easyoperator-line
- https://github.com/haya14busa/vim-easyoperator-phrase
Usage example for the base features
<cursor>Lorem ipsum dolor sit amet.
Type <Leader><Leader>w
(<Plug>(easymotion-w)
) to trigger the word motion w
.
When the motion is triggered, the text is updated (no braces are actually added,
the text is highlighted in red by default):
<cursor>Lorem {a}psum {b}olor {c}it {d}met.
Press c
to jump to the beginning of the word "sit":
Lorem ipsum dolor <cursor>sit amet.
Similarly, if you're looking for an "o", you can use the f
motion.
Type <Leader><Leader>fo
, and all "o" characters are highlighted:
<cursor>L{a}rem ipsum d{b}l{c}r sit amet.
Press b
to jump to the second "o":
Lorem ipsum d<cursor>olor sit amet.
Jeffrey Way of Nettuts+ has also written a tutorial about EasyMotion.
New features in version 2.0
Two key highlighting
When EasyMotion runs out of single characters to highlight movement targets, it now shows you immediately the keys you have to press.
In previous versions you could not see the next character you would needed to press until you entered the first one. This made movement over long distances less fluid. Now you can see at a glance exactly which characters to select to get to your destination.
Bidirectional motions
All motions now come in a bidirectional variants (e.g. <Plug>(easymotion-s)
,
<Plug>(easymotion-bd-w)
and so forth).
By default you can already jump forward or backward with <Leader>s
. A useful
trick is to map nmap s <Plug>(easymotion-s)
to use s
instead and save one
keystroke!
2-character search motion
You can now also perform a 2-character search, similar to vim-seek/vim-sneak with <Plug>(easymotion-s2)
. For example you can highlight all words that start with fu
.
" Gif config
nmap s <Plug>(easymotion-s2)
nmap t <Plug>(easymotion-t2)
n-character search motion
You can also search for n
characters, which basically can be used to replace the default search of Vim.
It suports incremental highlighting and you can use <Tab>
and <S-Tab>
to scroll down/up a page. If you press
<CR>
you get the usual EasyMotion highlighting and can jump to any matching target destination with a
single keystroke.
What sounds complicated should become clear if you look at the following examples.
" Gif config
map / <Plug>(easymotion-sn)
omap / <Plug>(easymotion-tn)
map n <Plug>(easymotion-next)
map N <Plug>(easymotion-prev)
Within line motion
Every motion also has variants that are restricted to just the current line
(e.g. <Plug>(easymotion-sl)
, <Plug>(easymotion-bd-wl)
, etc...). This can be
helpful if you find the full search distracting or slows down vim.
hjkl motions
EasyMotion can be configured to avoid repetitive use of the h
j
k
and
l
keys.
" Gif config
map <Leader>h <Plug>(easymotion-lineforward)
map <Leader>j <Plug>(easymotion-j)
map <Leader>k <Plug>(easymotion-k)
map <Leader>l <Plug>(easymotion-linebackward)
let g:EasyMotion_startofline = 0 " keep cursor colum when JK motion
Smartcase & Smartsign
This setting makes EasyMotion work similarly to Vim's smartcase
option for
global searches.
let g:EasyMotion_smartcase = 1
With this option set, v
will match both v
and V
, but V
will match V
only. Default: 0.
let g:EasyMotion_use_smartsign_us = 1 " US layout
" or
let g:EasyMotion_use_smartsign_jp = 1 " JP layout
This applies the same concept, but for symbols and numerals. 1
will match 1
and !
; !
matches !
only. Default: 0.
Migemo feature (for Japanese user)
let g:EasyMotion_use_migemo = 1
Easymotion can match multibyte Japanese characters with alphabetical input.
For example, <Leader><Leader>sa
can search 'あ'.
This feature doesn't require cmigemo because Easymotion includes regex
patterns generated by cmigemo. However installing cmigemo
will make
2-character and n-character search motions to also support the migemo feature.
Default:0
Repeat motions
Repeat the last motion
<Plug>(easymotion-repeat)
Repeat the last find motion
In a find motion (e.g. <Plug>(easymotion-s)
), type <CR>
without
input characters to find the last motion again.
Jump to next/previous match (even on next/previous page)
<Plug>(easymotion-next)
<Plug>(easymotion-prev)
Support for dot repeat
This requires https://github.com/tpope/vim-repeat.
You can use EasyMotion with operators and press .
to repeat!
It is well-behaved, and consistent with the default behavior of Vim.
" Gif config
" Require tpope/vim-repeat to enable dot repeat support
" Jump to anywhere with only `s{char}{target}`
" `s<CR>` repeat last find motion.
nmap s <Plug>(easymotion-s)
" Bidirectional & within line 't' motion
omap t <Plug>(easymotion-bd-tl)
" Use uppercase target labels and type as a lower case
let g:EasyMotion_use_upper = 1
" type `l` and match `l`&`L`
let g:EasyMotion_smartcase = 1
" Smartsign (type `3` and match `3`&`#`)
let g:EasyMotion_use_smartsign_us = 1