airline_c (which contains the filename) usually is used together with
the buffer number, so that several windows showing the a different
buffer do not share the same highlighting group.
This was fixed in 73aea86a, but unfortunately it was forgotten to not
only add this to the current group, but also modify the previous group
accordingly. This is what this patch does.
fixes#1268
consider a window with these splits:
,----
| file1
| ---
| file2
| ---
| file1
`----
If the top buffer is the active one and you start modifying this buffer,
this will also reset the highlighting for the inactive buffer2, since
the highlighting group 'airline_c_inactive' is used for both windows
(one having the unmodified buffer 'file2' and one having the modified
'file1').
This lead to the incorrect highlighting of the buffer name of file2.
Airline basically already created different airline_c<bufnr>_inactive
highlighting groups, but unfortunately did not use them.
Therefore, make the builder aware of this and always append the buffer
number to the group 'airline_c' if it is in an inactive window.
2) we need to make sure, the highlighting won't get overwritten, so
make the highlighter aware of this situation as well, by appending the
buffer number to the group name, if it creates the 'inactive' mode
groups and a buffer number has been given.
this fixes#1233
Using let g:airline_section_y = airline#section#create_right(['ffenc','%{strftime("%H:%M")}'])
will result in an output string of `utf-8[unix] < < 00:00`
This happens, because the function util#prepend() will eventually add an
extra separator, if the width is zero. Therefore, when building the
string, remember, if the last section added an extra separator and only
add one, if there hasn't been added one before.
fixes#1220
If active buffer is modified, `:AirlineRefresh` apply `normal` highlight
instead of `normal_modified` highlight.
No particular config is requiered to reproduce this bug.
I see this bug with option `g:airline_skip_empty_sections` set.
Add any modification at the active buffer return to normal mode,
**do not save** and wait a few seconds, you can see highlight change to
normal but file is modified.
Without option `g:airline_skip_empty_sections`, add any modification at
the active buffer return to normal mode and type `:AirlineRefresh` you
can see change to bad highlight .
Cache the hunk values. In case of short windows, shorten the hunk string
a little bit and make the branch extension take the hunk value into
account when deciding how much to shorten it.
Sometimes, if a buffer triggers many whitespace check warnings,
and the Vim window size is too small, other parts of the statusline
might become unreadable.
Therefore, if the window size is smaller than say 120 characters
and the whitespace warning > 9 chars, limit it to 10 characters
and inidicate, that there is more to come
fixes#1187 by making sure, we only call functions, that actually exist.
Should make vim-airline work with lady loaded YCM, e.g. using vim-plug:
```viml
" Code to execute when the plugin is loaded on demand
Plug 'Valloric/YouCompleteMe', { 'for': 'cpp' }
autocmd! User YouCompleteMe if !has('vim_starting') | call youcompleteme#Enable() | endif
```
Make sure, b:airline_head variable is set, also it is initially set in
this function earlier. But see #1171 for an error.
Therefore, before checking if the variable is empty, make sure it
exists.
fixes#1171
This is a little bit a hack, because by the time the separators are
added, it is not clear, if the following section is empty, therefore
we need to parse the content of the following section and eval the
expressions to find out, if this is empty
Remarks:
- catch all exceptions when eval'ing statusline
- make sure, that the seperators are highlighted
even when skipping empty regions (highlight group
names need to be adjusted)
- if a section is defined as empty, it will be removed completly from
the statusline. This means, it won't be called on the next update
and may not refresh properly (e.g. when the whitespace check
triggers, therefore, the whitesapce extension has to call an
explicit redraw whenever it is supposed to be refreshed)
"system()" called by "get_git_untracked" and "get_hg_untracked" fails
sometimes. It reports error "Can't open file /tmp/***".
The root cause is that the file path for system() contains some unordinary
character and lacks quotes.
airline#extensions#load() tries to load all extensions,
the user has specified in g:airline_extensions.
However, if e.g. bufferline is requested to be loaded, but
is not installed, it will throw an error
E117: Unknown function: airline#extensions#bufferline#init
Therefore, catch E117 and show a warning.
closes#1127
Similar to #1065 and #1081, adds link scripts to be excluded.
Adds a list containing C-like languages to ignore, which implement
multiline comments as:
/*
*
...
*/
Comment below filetype check reflects all exclusions (c-like)
This patch prevents check_mix_indent_file() form notifying a "mix-ident-file"
when working where C/CPP using space and comment like:
/**
* Some comment on the 1st column that shall not trigger check_indent_file()
*/
This kind of file can be found in linux kernel for example.
tabline
Solution: Add a new option which inverses the position of buffer and
tabs
If switch_buffer_and_tabs is 0 (default) buffer are on the left and tabs
on the right else if is 1 the order is reversed.
theme usually use '_' instead of '-', so replace that first before
trying to match.
Second, make the patterns easier to match.
Third, make sure, match for Tomorrow happens with matching case
fixes#1056
This is required when used with 'Normal' with a transparent background.
Falling back to 1 here results in "red" for "ctermbg"!
I think it's important to keep the 'NONE' color property here, instead
of hardcoding the fallbacks (even if white would be used instead of
red).
This is a new tabline extension, that displays both the buffers open and
the available tabs. This has been requested by #639 and fixes#639.
This is based on blings work on branch spike.
This uses the new highlight groups tab*_right, so that the separators
have the correct color. Also this makes some configuration variable
obsolete and therefore, they have been removed.
remove unused combined config variable, remove space after tab
This should make the buflist algorithm faster.
Also there is an alternative implementation in branch 535 available,
which avoids looping over the complete range, I'll stay with the current
approach, as it does not depend on BufAdd/BufDelete autocommands.
details:
instead of testing for buflisted() and bufexists() we only test for
buflisted() because, this also tests for the existence of the buffer.
Also instead of a second loop of the exclude patterns, we'll join all
of them together with '\|' and check if they match the current buffer.
The rest of the conditions have been joined into a single condition.
This together made up an improvement of
Orig:
FUNCTION airline#extensions#tabline#buflist#list()
Called 94 times
Total time: 0.267305
Self time: 0.267305
New:
FUNCTION airline#extensions#tabline#buflist#list()
Called 85 times
Total time: 0.124572
Self time: 0.124572
Try a different approach, that does not echo
the commandline. For that, create a <silent> mapping,
that is called via feedkeys() and as such should update the tabline.
fixes#1011
Solution: Use the current one from ctrlspace 5.0 + minor style fixes
Problem: CtrlSpace 5.0 does no longer work with airline
Solution: Modify the ctrlspace extension to call the new APIs
The statusline work fine but the custom ctrlspace function
somehow/somewhere gets overridden and I could not figure out where.
Therefore the user must add
let g:CtrlSpaceStatuslineFunction = "airline#extensions#ctrlspace#statusline()"
to its .vimrc.
Problem: Ctrlspace 5.0 does not integrate well into tabline
Solution: Write a tabline extensions for ctrlspace 5.0.
The extensions is capable of showing both tabs and buffers, but only the
buffers of a current tab are shown.
This is an extension to the whitespace extension.
It can now detect, if there is mixed indentation used within a file,
e.g. (using space for indentation on some lines and using tabs on other
lines.
This fixes#560
Most of them seem to be caused by using :hi statements, although the
highlighting group to be created is exactly the same. Therefore, get the
info from actual definition and only execute :hi when the new group is
actually different.
Also try to avoid to generate :hi statements when the popupmen is
visible. This causes flickers.
This is probably a bug in Vim because redrawing might cause
Vim to actually try to access a line of the buffer, that hasn't
been loaded yet.
Therefore try to update the tabline, by performing a two :set mod!
calls.
first argument of git status is <pathspec> in git speech,
and so if you feed it a directory, that contained an untracked file,
the directory would be marked as untracked. So fix this.
This will show a little not-existing sign in a buffer,
if that file lives in a git/hg repository but does not exists
there yet. Use `:let g:airline_symbols.notexists='!'` to configure
the '!' as symbol. By default, will use U+2204 symbol
To not impact performance by shelling out a lot, the result is cached
until the buffer is written or a shell command is issued.
Should work with mercurial and git.
fixes#925
1) Make sure airline_error and airline_warning highlighting are
different, so that the correct separator will be drawn. This
fixes#982.
2) allow to deactivate %(%) to workaround a vim bug, that may cause
leaking of colors from one section to the next and adding additional
spaces. This needs to be fixed upstream:
https://groups.google.com/d/msg/vim_dev/sb1jmVirXPU/mPhvDnZ-CwAJ
Possibly, also related to neovim/neovim#4147
Use `:let airline#extensions#default#section_use_groupitems = 0`
to disable grouping of statusline items
meaning that branches retrieved from those are now displayed side by
side. The order can be customised with g:airline#extensions#branch#vcs_priority.
The VCS name is now prepended to the branch name to be able to tell
which is which. The VSCCommand behaviour is unchanged.
Also restructured the code a little bit, and made found_fugitive_head
variable behave as its name suggests.
Currently, vim-airline uses hard-coded '\s$' to check for trailing
whitespace. However you might want to check for different values.
Therefore, set the variable
g:airline#extensions#whitespace#trailing_regexp to the required regexp
value.
closes#663
1) allow for custom formatting of the output of the wordcount formatter
This allows for formatting numbers correctly e.g. 1,042 in English
locale and 1.042 in German locale.
2) cache values, so that no on every cursor move the wordcount needs to
be recalculated.
this issue fixes#758
The problem was, that a given color list ['','',0,'',''] was given to
the airline#highlighter#exec() function. This resulted in the following
comparison:
if (get(colors,2,'') != '') ? 'ctermfg='.colors[2] : ''
which, since echo 0 != '' returns falls will return a single:
:hi group
and no color codes given and therefore, Vim would output the
current highlighting group.
Use isnot# as comparison to fix this issue.
This fixes#511
It allows the virtualenv plugin to call back and tell the airline plugin
to update the statusline. Therefore, the new function
airline#extensions#virtualenv#update() is provided. However, to properly
fix this issue, the virtualenv plugin needs to call this function.
Second, depending on $VIRTUAL_ENV is not safe, since the virtualenv
plugin might define it itsself when calling :VirtualEnvActivate
Therefore skip this test and just test for existance of he
:VirtualEnvList command.
Prior to this change airline set the function for getting hunks only once,
which works as long as you don't use simlar plugins for different VCS at the
same time.
If that was the case, only one plugin would have won, depending on the first
buffer handled by these plugins. And although the code for the other plugin
was run every time, you would never see the actual line changes, since airline
didn't even bother checking.
Now these plugins can be used side-by-side in the same Vim instance, e.g.
gitgutter for, well, git and signify for the rest.
The difference as per documentation of :statusline
f S Path to the file in the buffer, as typed or relative to current
directory.
F S Full path to the file in the buffer.
CapsLockStatusline() used to return '[caps]' when soft-capslock was
on... and now returns '[Caps]'. As we're just using this to test for
the lock, we lower-case the return value in order to "normalize" the
value across versions.
The change in behaviour can be seen at:
tpope/vim-capslock@3a0f051373
Use `s:current_buffer_list` always in `s:get_buffer_list()`, and
invalidate it via BufAdd and BufUnload.
Fixes regression from ce58af7191 (commitcomment-9647487).
Vim's `get()` calls the expression for `{default}` always, not only if
the default is going to be used!
This caused `airline#extensions#tabline#get_buffer_name` to not use the
cached value.
Fixes https://github.com/bling/vim-airline/issues/697.
When using a non-english locale, the name of the Quickfix window can change, making the detection of Quickfix vs Location list fail.
E.g., my locale is set to italian and the Quickfix window's name is `[Lista Quickfix]` rather than `[Quickfix List]`.
This change generalizes the pattern used to detect the Quickfix window.
Eclim uses signs for code reference searches and they shows up as INFO
signs. These are not errors/warnings and hence should not be included in
count.
Testing:
Verified the right count shows up.
In large code base, typically there will lot of warnings because the
file has been changed by many people and not everyone bothered to follow
coding conventions. So its more useful to show the errors first. Once
all errors have been fixed, we can focus on warnings.
- Fugitive can edit virtual files that represent objects in git; while
editing these files, it still reports on the HEAD of the relevant
repo, which should be displayed as the branch (rather than having the
branch section disappear)
- Sol: Used a less distracting color to show a modified file/buffer
- Sol: Similar change as above, to tabline as well
- Sol: Warning colour imporved (Previously was some bad shade of magenta)
- Sol: All the Above mentioned changes replicated for CTERM values as well
--------------------------------------------------------------------------
- Luna: `Inactive Modified` colour is improved (Was a shade of red
that was hard to read)
This commit adds a couple of new settings so that it's possible to hide
the tab type (all the way to the right) and the symbol which represents
the close button.
The settings and their defaults:
let g:airline#extensions#tabline#show_tab_type = 1
let g:airline#extensions#tabline#close_symbol = 'X'
