Commit Graph

1467 Commits

Author SHA1 Message Date
Christian Brabandt
8c36d2b595
allow to use alternative seperators for inactive windows
closes #1236
2018-11-08 17:09:17 +01:00
Christian Brabandt
a993ae5d42
builder: don't call add_separtor twice 2018-11-08 16:44:26 +01:00
Christian Brabandt
f08078d683
autoload: add comments 2018-11-08 16:20:37 +01:00
Christian Brabandt
99971aa24d
highlighter: also check separator groups for being defined
Make sure, to also check, if the separator groups have already been
defined. Once they are defined initially, they are usually available in
the palette group. So do not redefine them once they have been created
initially.

references #1779
2018-11-08 15:31:58 +01:00
Christian Brabandt
d57344a3c3
highlighter: skip more buffer related hi groups
Previously, we only checked for if the name starts with 'airline_c'

But there could as well be highlighting groups starting being called
'airline_b_to_airline_c5', but if buffer 5 is no longer visible in the
current viewport, then we do not need to recreate those groups.
2018-11-08 13:32:20 +01:00
Christian Brabandt
496de8b745
highlighter: do not skip empty c_sections
currently, if the matchstr() evaluates to '', it would skip the required
section, because bnr would be evaluated to zero and since there is no
buffer zero, skip that highlighting group.

Make sure, to only skip the highlighting group if the buffer number is
actually > 0
2018-11-08 12:40:46 +01:00
Christian Brabandt
71dc6f0257
highlighter: fix regex typo 2018-11-08 12:24:02 +01:00
Christian Brabandt
09b5eb952c
highlighter: Only recreate hi groups for visible buffers
In a long editing session, there could happen to accumulate several
highlighting groups for buffers that might no longer be visible.

Therefore, only re-create the highlighting group for buffers that are
actually displayed in the current tabpage. If not, skip them.

references #1779
2018-11-08 12:20:55 +01:00
Christian Brabandt
b7367c605a
highlighter: do not redefine the same groups several times
previously, it could happen that the same highlighting group was defined
several times, because it was available in several modes within
g:airline#theme[mode]. So the second one would always win.

Therefore, loop through all modes in reverse order and define the group
and remember what group has already been defined. If we happen to have
to re-define the same group, skip it. Since we are traversing the list
in reverse order, this should make sure the last definition wins.

This has the benefit of being more performant and hopefully helps with
e.g. #1779 and similar issues.
2018-11-07 14:25:40 +01:00
Christian Brabandt
18200bfad3
modes: do not add special sections to accents 2018-11-07 13:49:22 +01:00
Christian Brabandt
776f7aa948
Merge pull request #1816 from amiller27/numbered-ctrlspace-tabs
Add option for numbered tabs
2018-11-01 16:10:16 +01:00
Aaron Miller
62f3d1d412 Add option for numbered tabs
Cleaned up variable name, added documentation
2018-11-01 10:44:44 -04:00
Christian Brabandt
6516b1b4dc
po: only reset cache if window width changed 2018-11-01 11:18:04 +01:00
Christian Brabandt
fc021cf4e8
po: only substitute, if value is present in string 2018-11-01 11:14:57 +01:00
Christian Brabandt
6508558c3d
po: shorten and reformat message format for smaller windows 2018-11-01 10:40:41 +01:00
Lars Michelsen
0609a1f945 Visualize that ale is currently checking the current buffer
At the moment you can never be sure whether you look at the results
that ale just produced after your last changes or you are looking at
outdated information.

Instead of showing the last results while ale executes checks on the
current buffer it can now show a specific indicator.

This commit introduces the new config variable
`g:airline#extensions#ale#checking_symbol` which defaults to "...". In
case you don't want to see this, you may set it to an empty string.
2018-10-18 21:33:15 +02:00
Christian Brabandt
2e99805dbf
Fix failing test 2018-10-16 12:13:24 +02:00
Christian Brabandt
726b730f0a
highlight: correctly cache and restore reverse attributes for highlighting colors
references #1779
2018-10-16 12:03:31 +02:00
Christian Brabandt
7e004804d1
Merge pull request #1811 from LarsMichelsen/update_post_ale
Improve update logic after ale finished
2018-10-16 10:56:49 +02:00
Christian Brabandt
d81cdacb1e
better disabled highlighting for inactive windows on FocusLost
This will make sure that the current window will be highlighted as
expected, even if there are no other windows and all highlighting groups
will be correctly re-created as 'inactive'

references #1807
2018-10-16 10:49:17 +02:00
Christian Brabandt
c44bbc66f5
main: make sure winnr is available in s:context for check_mode function 2018-10-16 10:26:26 +02:00
fish
4d825bdb64 Remove trailing space 2018-10-15 20:35:28 +08:00
Christian Brabandt
68f5f1e50d
mode: Update doc, sort dict 2018-10-15 14:17:49 +02:00
Lars Michelsen
3f34ff56b8 Improve update logic after ale finished
Previously the ale refresh was triggered after user interactions only.
When linting takes some time and the user is not actively working the
ale information was not updated while the things ale directly controls
were updated. This change makes showing linting results a loot smoother.
2018-10-14 20:19:39 +02:00
Christian Brabandt
f045452743
main: disable airline on FocusLost
When switching away from Vim and your terminal supports the FocusLost
autocommand, set the statusline to inactive, so it won't distract you
too much when working with another application.

In the gui, the FocusLost autocommand should always trigger.

This is now the default, if people start complaining, that behaviour
should probably be made configurable.

closes #1807
2018-10-03 12:31:45 +02:00
Doron Behar
7190164451 Externalize quickfix function returning text
Useful when one wants to use this function for something else and to
know if a QuickFix window is actually a Location list with qf as
`&filetype`.
2018-09-28 12:56:49 +03:00
Christian Brabandt
a0298263b7
autocomd: do not re-evaluate modelines
fixes #1804
2018-09-25 16:03:30 +02:00
Liam Fleming
2390022e33
wordcount: do not rely on english in old versions
for older Vims, the wordcount extension falls back to `g<c-g>` and
parses the messaage that is generated.

When doing so, it expects the English locale, which might not be true.
Therefore, try to regex parse the result without using the english words
(assuming the output is still in the same order as in English).
2018-09-23 20:10:32 +02:00
Christian Brabandt
57bbe050c7
Merge pull request #1801 from flemingfleming/wordcount-fixes
The rest of the wordcount fixes, and some improvements
2018-09-23 17:38:11 +02:00
Dennis Falling
2f17e368b5 Add dictionary key check for d.severity 2018-09-23 10:50:15 -04:00
Liam Fleming
0f6cfcdfc2 wordcount: Fix the visual count matching pattern 2018-09-22 13:57:53 +01:00
Liam Fleming
264c1fefd2 wordcount: Compatibility fixes and General upkeep
Compatibility:
- Don't use a script-local function to update the format strings
- Protect against `:normal!' moving the cursor on on the wordcount check

Bugfix:
- Let to_string() try to return something for all values
  - Now returns correctly when passed both 0 and '0'

Upkeep:
- Simplify check again no valid key from winwidth()
- Old wordcount check: use matchstr() - more expressive and fewer steps
- Improve documentation style/clarity/detail
2018-09-22 03:34:27 +01:00
Christian Brabandt
ae024293e4
wordcount: fix wrong normal mode command 2018-09-21 21:37:21 +02:00
Christian Brabandt
ecf10d0e58
wordcount: check that the retun value has the dict key
else it will throw an error.
2018-09-21 11:49:42 +02:00
Christian Brabandt
82a6097b01
wordcount: work-around non-existing v:t_list
v:t_list is an internal variable describing the type of a list.
Unfortunately, this is not available in older vims. So let's fall back
to using `type([])`

see #1795
2018-09-20 11:44:17 +02:00
Christian Brabandt
7957bd1d32
wordcount: only add fmt function once to statusline functions
This prevents a warning message, when the function is tried to add
several times. Also while at it, add a '!' so that no error is thrown if
the file is sourced a second times.
2018-09-20 10:41:50 +02:00
Christian Brabandt
110594c91a
tabline: remove spurious variable 2018-09-20 10:31:14 +02:00
Christian Brabandt
012229fe08
tabline: Ignore buffers in buflist matching ignore_bufadd_pat
closes #1777
2018-09-20 10:26:32 +02:00
Christian Brabandt
a60eabb82f
tabline: do not show terminal buffers by default 2018-09-20 10:25:47 +02:00
Christian Brabandt
fce8585239
main: detect some more modes 2018-09-20 10:13:59 +02:00
Christian Brabandt
1b8ecb6336
Merge pull request #1796 from flemingfleming/wordcount-improvements
[WIP] Rewrite wordcount plugin
2018-09-20 10:04:53 +02:00
Liam Fleming
0756b9a4aa wordcount: Re-enable updating the format string 2018-09-18 20:12:17 +01:00
Christian Brabandt
251ed064e8
Make mode return only single letter except for virt replace mode
commit bcd37fc115 changed the detection of modes slightly in that it
allowed not only single letters but also several letters.

While in theory, it might be okay to have extra modes displayed like
Insert Completion or Normal Insert, or Operator Pending, let's for now
just revert it to the default. We can always enhance it later if
requested.
2018-09-18 20:00:46 +02:00
Liam Fleming
c33c1de079 wordcount: Simplify update strategy
Checking for wordcount changes now uses a b:changedtick comparison in
the statusline funcref. The autocommand strategy that used to do this is
removed, simplifying the code.
2018-09-18 16:05:01 +01:00
Liam Fleming
9903fee60e wordcount: Optimise formatter calls, cleanup code
- Formatter is now only called when the wordcount changes
- ...#apply() now only compares against the filetype list when necessary
- Old format() function is no longer called for (unsupported) counting
  of visual words
- Misc code quality improvements
2018-09-18 15:13:43 +01:00
Liam Fleming
487d262901 wordcount: formatter: code quality improvements
- Rename new formatting function: transform() -> to_string()
- Optimise separator selection
- Other quality improvements
2018-09-18 02:04:35 +01:00
Christian Brabandt
a1c112cafd
main: replace and virt replace mode should use same coloring
fixes #1794
2018-09-16 20:01:00 +02:00
Christian Brabandt
bcd37fc115
mode: add support for virt replace mode
fixes #1792
2018-09-16 18:25:27 +02:00
Christian Brabandt
aec0a1a15a
languageclient: Check severity key before accessing it
closes #1793
2018-09-16 18:17:04 +02:00
Daniel Wennberg
cda5647a29 Don't use the read-only count as local variable
The variable name `count` is always equivalent to `v:count`, which is
a read-only variable and cannot be assigned to.
2018-09-09 23:51:11 -07:00
Christian Brabandt
f5676d1fa1
Merge pull request #1788 from hallettj/extension/languageclient
Extension to report errors and warnings from LanguageClient plugin
2018-09-10 07:36:15 +02:00
Jesse Hallett
a92b12e1c6 Implement extension to report errors and warnings from LanguageClient plugin 2018-09-09 23:53:08 -04:00
Sebastián Mancilla
c3434164b2 Load vimtex only when the extension is enabled
Do not force loading the full vimtex autoload script for all users.
First check if the extension is enabled.
2018-09-06 13:15:38 -03:00
Liam Fleming
8715d13cc5 wordcount: Refactor updating and autocmds
Various improvements:
 - Seperate out visual mode detection.
 - Use TextChanged rather than CursorMoved where supported.
 - Let users specify the filetypes for which wordcounting is enabled
   with a list rather than a pattern.
 - Move the filetype check to when airline is refreshed, as opposed to
   on every update; autocommands are not created if wordcounting is
   disabled
2018-07-28 19:26:24 +01:00
Liam Fleming
44da0a4761 wordcount: Replace formatter interface
Currently the formatter, and not the wordcount plugin, is responsible
for providing the wordcount as well as formatting it. The default
formatter allows visual mode word counting, although this is not
documented.

The new interface - a transform() function, allows the main wordcount
plugin to internalise this logic. Providing the wordcount simplifies
formatter implementations:
 - All formatters can display the visual wordcount.
 - Formatters do not have to worry about compatibility with different
   vim versions.

The old format() function can now be deprecated, although the wordcount
plugin retains compatibility with formatters using it. The default
formatter will also be used as a fallback if no suitable function is
found.

The default formatter is rewritten to use the new interface.
2018-07-28 18:24:12 +01:00
Christian Brabandt
c7fb175d35
Add a specific color for commandline mode
closes #1768

Colors for the other themes need to be defined however
2018-07-26 10:22:40 +02:00
Mo Hyun
723987eca9 Add vim-grepper extension
- Displays a segment when a grepper search is running
2018-07-23 13:05:34 -07:00
Tim Pope
a8ccef61ba Update to new Fugitive real path API 2018-07-22 15:39:54 -04:00
Christian Brabandt
5aef1b90e5
tabline: Correctly trigger on BufDelete autocommand
fixes #399
2018-07-13 22:29:34 +02:00
Christian Brabandt
821372b9cf
tabline: re-map tabline keys
fixes #1753
2018-07-13 21:33:03 +02:00
Liam Fleming
781c40bb3d Create AirlineModeChanged autocmd 2018-06-28 18:44:26 +01:00
Tim Pope
9bee0e923e Use FugitivePath in fugitiveline if available 2018-06-27 18:07:59 -04:00
Tim Pope
66e49d9a15 Fix fugitiveline when file is also branch name 2018-06-27 18:05:09 -04:00
Christian Brabandt
b790fd2120
Merge pull request #1750 from Mangero/arduino-whitespace
Add Arduino to list of C-like languages
2018-06-18 08:39:53 +02:00
Mangero
a141918faa
Add Arduino to list of C-like languages
Add 'arduino' filetype to list of C-like languages. This is needed in
order to avoid mix-indent-file warnings when using hard tabs for
indentation in Arduino source files (*.ino, *.pde) containing top level
block comments with leading space before a '*'.

Similar to: 460ed02864
Original fix: 8fde76dd63
2018-06-18 01:09:56 +02:00
Liam Fleming
11bc0ba843 Move CursorMoved autocmd to main augroup 2018-06-16 20:34:07 +01:00
Liam Fleming
feca81fb86 add "!" to function signatures 2018-06-13 17:52:13 +01:00
Christian Brabandt
4f95970228
branch: use :noa before calling async func
for some reasons, calling async functions might cause an error, if a
SourcePre command has been defined. So explicitly call the functions
using `:noa` modifier to prevent triggering the SourcePre autocommand.

fixes #1742
2018-06-11 14:45:29 +02:00
Hana Shiro
acb93da0d8 Fix tabline didn't update when enable both buffers and tabs 2018-06-05 06:11:14 +08:00
Christian Brabandt
add75907d5
Merge pull request #1738 from shirohana/fix/ctrlspace-tabline-switching
airline#extensions#ctrlspace: Fix tabline didn't update when switch to tab which focused on non-listed buffer
2018-06-04 22:56:22 +02:00
Christian Brabandt
eab6d35852
terminal: Some improvements to Terminal detection
closes #1730

- Make sure to always call the term extension on TermOpen autocommands
- consistently use the airline_term highlighting group
- hard code the airline_term highlighting group, because by the time the
  function airline#themes#patch() is called the highlighting group
  airline_c would no be defined, so we cannot dynamically get those
  attributes
- In the documentation, mention how the g:airline_mode_map can be set
  including the terminal section
2018-06-04 22:44:46 +02:00
Christian Brabandt
1bb1ce594a
Formatter: Use pathshorten() instead of substitute()
The default formatter uses a hand-build regexp for shortening the path
in the tabline. However, since it uses the \w  regex atom, this won't
match e.g. cyrillic letters.

To fix this, use the builtin pathshorten() function which does handle
this case correctly. For a test, use e.g. 'D/Учёба/t.c'

closes #1737
2018-06-04 21:59:16 +02:00
Christian Brabandt
044a90ed55
use get(v:, 'lang', '') instead of v:lang
closes #1735
2018-06-04 21:45:46 +02:00
Christian Brabandt
981b83003f
fugitive: Use FugitiveHead() instead of fugitive#head
function if possible and use it instead of the fugitive#head
(which will always autload the fugitive plugin).
2018-06-04 18:32:30 +02:00
Christian Brabandt
a1680cc36d
fugitive: Check for existence of FugitiveStatusline function
as per @tpopes advice.
2018-06-04 17:42:33 +02:00
Christian Brabandt
30a3c4f549
branch: fugitive renamed its functions
this caused that the branch extension was not correctly working anymore
because of a refactoring of fugitive tpope/vim-fugitive@5d11ff7

Solution: Move the existence check for the fugitive plugin into a
separate function and call it from there in all places that check the
fugitive plugin. Do the same for lawrencium and vcscommand check.

fixes #605 #1739
2018-06-04 17:38:49 +02:00
Hana Shiro
c7d4710f76 Refactor airline#extentions#tabline#ctrlspace#* 2018-06-02 23:41:15 +08:00
Hana Shiro
6e1e6686e7 Fix problems caused by #1524 2018-06-02 21:22:00 +08:00
Hana Shiro
a6e07b6a55 Remove unused catch block 2018-06-02 14:04:25 +08:00
Hana Shiro
4db6d11962 Fix indentation 2018-06-02 13:59:08 +08:00
Hana Shiro
ac799f6021 Rename parameters for better readability 2018-06-02 13:49:32 +08:00
Hana Shiro
92bf1b0b39 Use ternary-operator 2018-06-02 13:02:49 +08:00
Christian Brabandt
b84e13f1d7
Blacklist startify for [noperm]
Startify unfortunately does not set the buftype option, so the
`[noperm]` would be shown, since the buffer is not really a file.
(see mhinz/vim-startify#324)

So allow to blacklist startify from this setting. To do so, the logic
from the tabline extension was refactored out into a separate function
that returns true, if the buffer matches
`g:airline#extensions#tabline#ignore_bufadd_pat` and that function is
then reused for the readonly() function as well.
2018-05-11 22:32:20 +02:00
Christian Brabandt
c7e05efb76
Only consider regular files for the '[noperm]'
Recently, NERDTree added the &readonly setting to its buffer.
Unfortunately, this caused airline to render the '[noperm]' string in
it.

Fix this by only making the readonly check for buffers that actually
represent files (e.g. the buftype option is empty).
2018-05-11 09:53:55 +02:00
iroedius
15bc732df4 allow to also disable trailing whitespace check per filetype 2018-04-28 07:34:59 +02:00
Christian Brabandt
33310c5b24
whitespace: Allow to disable individual whitespace checks per filetype
closes #1716
2018-04-27 08:25:49 +02:00
Stanislav Gobunov
c4a4a20b8d
xkblayout: Make Short codes configurable
airline#extensions#xkblayout#short_codes changed to global for easily redefine long named keyboard layout

closes #1713
2018-04-18 10:46:55 +02:00
Christian Brabandt
a76f523be5
bufferline: always add a space for the very first item
closes #1631
2018-04-15 10:16:28 +02:00
mg979
f7c818a0ff
add xtabline extension 2018-04-14 14:03:21 +02:00
Christian Brabandt
0df2c9b12e
Merge pull request #1700 from mox-mox/master
Add extension for vim-localsearch
2018-04-09 13:27:44 +02:00
mox
00f718691a Adding localsearch extension (code and documentation). See https://github.com/mox-mox/vim-localsearch 2018-04-09 00:47:23 +02:00
Christian Brabandt
d66b507b02
Merge pull request #1683 from idbrii/add-custom-scm
Make branch detection customizable
2018-04-08 21:56:32 +02:00
David Briscoe
8209ca7da1 Make branch detection customizable
Instead of requiring each version control plugin to modify airline to
show the current branch, provide a customization function we can check
instead.

Following the example of airline_theme_patch_func, you define the
variable like so:

    let g:airline#extensions#branch#custom_head = 'david#svn#get_branch'

Custom functions should cache their value. They may need an autocmd to
invalidate their cache:

    " Use a buffer-unique group name to prevent clearing autocmds for other
    " buffers.
    exec 'augroup svndavid-'. bufnr("%")
        au!
        autocmd BufWinLeave <buffer> unlet! b:svndavid_branch
    augroup END

This change lets me integrate with vc.vim (I couldn't get VCSCommand
working for svn) or write my own thing for perforce.

Additionally, always load whole file and check for existence.

Instead of determining up front whether various scm plugins are
installed, check for them on use so they can be added after this script
is sourced.

This also mitigates the problem of checking for existence of autoload
functions (which are not loaded by exist()). Since we're checking
root-level functions, they're likely to be loaded once we're using any
part of the plugin.
2018-04-06 09:40:17 -07:00
Christian Brabandt
902921931e
Simplify airline#init#gui_mode()
remove all the old code that is probably not used anymore
2018-04-06 02:21:20 +02:00
Christian Brabandt
ae394294c3
gutentags: output correct statusline message
fixes #1703
2018-04-06 02:14:10 +02:00
Christian Brabandt
bf3cc5ad9d
NerdTree: make the statusline configurable
Use the g:NerdTreeStatusline variable for configuring the
NerdTree statusline in the NerdTree window

closes #1705
2018-04-06 01:52:23 +02:00
Christian Brabandt
47bdae9067
Merge pull request #1702 from mrmr1993/fix-buffer-counts
Fix buffer numbering to start from 1 with buffer_idx_mode
2018-04-03 03:16:38 +02:00
Gianni Chiappetta
023fe122c5
Support typescript in jsformatter 2018-04-02 11:29:18 -04:00
mrmr1993
fbf96559c9 Fix buffer numbering to start from 1 with buffer_idx_mode
275ec4fe63 broke this so that numbering
started from 0 instead of 1 with
g:airline#extensions#tabline#buffer_idx_mode = 1

Specifically, I overlooked that |index| actually tracked the index of
the current buffer in the buffer list *starting from 1*, whereas I
assumed it tracked the true index (starting from 0).
2018-04-02 01:04:43 +01:00
Christian Brabandt
2ba64a88fd
Merge pull request #1691 from silenc3r/master
ALE: add option to disable line numbers
2018-04-01 14:13:29 +02:00
Christian Brabandt
f0b969549a
Merge pull request #1693 from mrmr1993/current-tabs-visible-experiments
Rework tabline for tabs and buffers
2018-04-01 14:01:17 +02:00
mrmr1993
47c36d2819 Don't let the current buffer be -1 when calculating the tabline 2018-04-01 01:17:18 +01:00
mrmr1993
aee733aa87 Don't show titles in the tabline if there aren't any
airline#extensions#tabline#buflist#list doesn't pick up some buffers
(most notably Netrw buffers), so there are sometimes no buffers to show
and the tabline code fails with an error. This avoids that situation.

It would be better to detect these and show titles for them, but for now
this restores the old behaviour.
2018-04-01 01:05:51 +01:00
mrmr1993
c75106f12d Don't change remaining_space in tabline builder until necessary 2018-03-22 16:42:06 +00:00
mrmr1993
4b1913ad13 Use insert_section for overflow markers in tabline builder 2018-03-22 16:42:06 +00:00
mrmr1993
df2f380c9e Add get_separator_change_with_end to tabline builder 2018-03-22 16:14:18 +00:00
Christian Brabandt
b9f55455fb
Revert "highlighter: Make the separators use a cterm background color"
This reverts commit e72a7e2c8d.
2018-03-20 15:30:02 +01:00
Christian Brabandt
d2ac3d5755
async: catch error when jobstart() fails
closes #1692
2018-03-20 14:01:46 +01:00
Christian Brabandt
e72a7e2c8d
highlighter: Make the separators use a cterm background color
should fix: #1663
2018-03-19 22:24:57 +01:00
mrmr1993
2528de7d81 Add comments to tabline/builder 2018-03-19 16:21:43 +00:00
mrmr1993
7396dc7a10 Create helper function tabline_evaluated_length 2018-03-19 15:05:50 +00:00
mrmr1993
51bb8dd7e0 Move strchars into util.vim 2018-03-19 15:03:51 +00:00
mrmr1993
5b7b9cf656 Rename remaining tab -> title in tabline/builder 2018-03-19 15:03:51 +00:00
mrmr1993
0b47adf087 Rename tab -> title in tabline/builder method names 2018-03-19 14:36:02 +00:00
mrmr1993
3914d5b475 Rename skipped_tabs_marker to overflow_marker 2018-03-19 14:36:02 +00:00
Christian Brabandt
ecff00a559
tabline: do not show buffer label if show_buffers is zero
fixes #1689
2018-03-19 15:06:55 +01:00
Dawid Zych
18f93ac96b ALE: add option to disable line numbers 2018-03-19 11:28:45 +01:00
mrmr1993
75f53ef6e5 Rename last_{left,right}_group to {left,right}_group 2018-03-18 01:15:11 +00:00
mrmr1993
a2e0ed982f Rename left{,_alt}_sep_size to {,alt_}sep_size 2018-03-18 01:13:30 +00:00
mrmr1993
84bf60c405 Statusline: Use separator widths to calculate whether a title will fit 2018-03-18 00:52:34 +00:00
mrmr1993
896c14bded Reset _remaining_space if a title can't be inserted
This gives us a chance to add the title on the other side if it will
fit, so that we fill more space in the tabline.
2018-03-17 20:05:38 +00:00
Ingo Heimbach
724beb0c73
Added a vim-gutentags extension
Added a segment that displays whether gutentags is running a ctags
instance.
2018-03-15 22:05:16 +01:00
Christian Brabandt
fb85c0a91a
Merge pull request #1678 from mg979/buflist
Changed buflist.vim algorithm
2018-03-15 21:52:35 +01:00
mrmr1993
d13305fc5d Redraw buffer tabline when the terminal width changes 2018-03-15 20:44:51 +00:00
mrmr1993
7844d8bf72 Remove get_visible_buffers 2018-03-15 20:44:51 +00:00
mrmr1993
4a342afb90 Add an option to centre the active tab in the tabline 2018-03-15 20:44:51 +00:00
mrmr1993
275ec4fe63 Use tabline builder for buffers tabline 2018-03-15 20:44:51 +00:00
mrmr1993
d9e68039b8 Take the first tab number in tabline/builder.insert_tabs 2018-03-15 20:44:51 +00:00
mrmr1993
3cd8daa162 Add support for get_pretitle and get_posttitle to tabline builder 2018-03-15 20:44:51 +00:00
mrmr1993
e6b6f36d90 Remove %@...@ patterns in evaluate_tabline if has('tablineat') 2018-03-15 19:21:15 +00:00
mrmr1993
a7bff3b30b Pass number of tabs as an argument to insert_tabs 2018-03-15 18:21:29 +00:00
mrmr1993
5ecc25d6d6 Move tab_nr_type into tabs get_title 2018-03-15 18:14:50 +00:00
mrmr1993
6db0af6f8d Factor out tab insertion into its own function 2018-03-15 18:14:24 +00:00
mrmr1993
9b41fe5de9 Replace tabs tabline remaining_space with a member variable 2018-03-15 18:01:39 +00:00
mrmr1993
1328610188 Initialise tabs tabline builder variables in insert_tabs 2018-03-15 17:46:33 +00:00
mrmr1993
ada8cd7641 Use variables in the tabs tabline builder to track position 2018-03-15 17:41:08 +00:00
mrmr1993
349d01ba39 Generate tabs directly in tabline/builder.build 2018-03-15 17:38:19 +00:00
mrmr1993
3f87d28abb Move insert_tabs into tabs tabline builder prototype
Also move evaluate_tabline and strchars methods that it uses
2018-03-15 17:05:58 +00:00
mrmr1993
71814fb19f Add get_title and get_group to tabs tabline builder 2018-03-15 17:04:19 +00:00
mrmr1993
b99da65412 Create insert_tabs function on builder for tabs tabline 2018-03-15 16:58:04 +00:00
mrmr1993
6286b6d8d8 Move get_group into its own function for tabs 2018-03-15 16:58:04 +00:00
mrmr1993
5907d3909e Add dedicated tabline builder 2018-03-15 16:38:36 +00:00
mrmr1993
57f2619c67 Remove unused variable b_tabline 2018-03-15 15:42:51 +00:00
mrmr1993
1837b2ee39 Use the size of the seperators to get the tabline's remaining space 2018-03-15 15:42:51 +00:00
mrmr1993
d3ec54d42e Remove magic contant for skipped_tabs_marker in tabline calculation 2018-03-15 15:18:57 +00:00
mrmr1993
2b0fe51f99 Replace %= with empty string in evaluate_tabline 2018-03-15 14:36:39 +00:00
mrmr1993
a8f92cc68a Rename skipped_tabs_marker to overflow_marker
This is set to g:airline_symbols.ellipsis, which this commit also adds.
2018-03-15 14:21:16 +00:00
Christian Brabandt
4237bfb052
branch: allow multibyte chars in shortening algorithm
previously, the branch extension used name[0:6], however that would
break with multibyte characters, since this is a byte index and not a
character index.

fixes #1686
2018-03-14 21:33:25 +01:00
mrmr1993
88dedb586a Update tabs tabline when the width of the terminal changes 2018-03-14 15:25:03 +00:00
mrmr1993
5d2d764368 Use strchars to calculate string lengths
This also adds a compatability wrapper, so that versions older than
Vim 7.3 are supported.

This is inspired by, and includes s:strchars from, @ruipgpinheiro's
commit e2d1295a3d3708e8d2a5eb30cac840fc9520bb8b
2018-03-14 15:13:40 +00:00