ctrlp.vim/doc/ctrlp.txt
2012-04-18 03:29:47 +07:00

1120 lines
42 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

*ctrlp.txt* Fuzzy file, buffer, mru and tag finder. v1.7.5
*CtrlP* *ControlP* *'ctrlp'* *'ctrl-p'*
===============================================================================
# #
# :::::::: ::::::::::: ::::::::: ::: ::::::::: #
# :+: :+: :+: :+: :+: :+: :+: :+: #
# +:+ +:+ +:+ +:+ +:+ +:+ +:+ #
# +#+ +#+ +#++:++#: +#+ +#++:++#+ #
# +#+ +#+ +#+ +#+ +#+ +#+ #
# #+# #+# #+# #+# #+# #+# #+# #
# ######## ### ### ### ########## ### #
# #
===============================================================================
CONTENTS *ctrlp-contents*
1. Intro........................................|ctrlp-intro|
2. Options......................................|ctrlp-options|
3. Commands.....................................|ctrlp-commands|
4. Mappings.....................................|ctrlp-mappings|
5. Input Formats................................|ctrlp-input-formats|
6. Extensions...................................|ctrlp-extensions|
===============================================================================
INTRO *ctrlp-intro*
Full path fuzzy file, buffer, mru and tag finder with an intuitive interface.
Written in pure Vimscript for MacVim and Vim version 7.0+. Has full support for
Vims |regexp| as search pattern, built-in MRU files monitoring, projects root
finder, and more.
To enable optional extensions (tag, dir, rtscript...), see |ctrlp-extensions|.
===============================================================================
OPTIONS *ctrlp-options*
Overview:~
|loaded_ctrlp| Disable the plugin.
|ctrlp_map| Default mapping.
|ctrlp_cmd| Default command used for the default mapping.
|ctrlp_by_filename| Default to filename mode or not.
|ctrlp_regexp| Default to regexp mode or not.
|ctrlp_match_window_bottom| Where to show the match window.
|ctrlp_match_window_reversed| Sort order in the match window.
|ctrlp_max_height| Max height of the match window.
|ctrlp_switch_buffer| Jump to an open buffer if already opened.
|ctrlp_reuse_window| Reuse special windows (help, quickfix, etc).
|ctrlp_working_path_mode| How to set CtrlPs local working directory.
|ctrlp_root_markers| Additional, high priority root markers.
|ctrlp_use_caching| Use per-session caching or not.
|ctrlp_clear_cache_on_exit| Keep cache after exiting Vim or not.
|ctrlp_cache_dir| Location of the cache directory.
|ctrlp_dotfiles| Ignore dotfiles and dotdirs or not.
|ctrlp_custom_ignore| Hide stuff when using |globpath()|.
|ctrlp_max_files| Number of files to scan initially.
|ctrlp_max_depth| Directory depth to recurse into when scanning.
|ctrlp_user_command| Use an external scanner.
|ctrlp_max_history| Number of entries saved in the prompt history.
|ctrlp_open_new_file| How to open a file created by <c-y>.
|ctrlp_open_multiple_files| How to open files selected by <c-z>.
|ctrlp_arg_map| Intercept <c-y> and <c-o> or not.
|ctrlp_follow_symlinks| Follow symbolic links or not.
|ctrlp_lazy_update| Only update when typing has stopped.
|ctrlp_default_input| Seed the prompt with an initial string.
|ctrlp_use_migemo| Use Migemo patterns for Japanese filenames.
|ctrlp_prompt_mappings| Change the mappings in the prompt.
MRU mode:
|ctrlp_mruf_max| Max MRU entries to remember.
|ctrlp_mruf_exclude| Files that shouldnt be remembered.
|ctrlp_mruf_include| Files to be remembered.
|ctrlp_mruf_relative| Show only MRU files in the working directory.
|ctrlp_mruf_default_order| Disable sorting.
|ctrlp_mruf_case_sensitive| MRU files are case sensitive or not.
Advanced options:
|ctrlp_status_func| Change CtrlPs two statuslines.
|ctrlp_buffer_func| Call custom functions in the CtrlP buffer.
|ctrlp_match_func| Replace the built-in matching algorithm.
-------------------------------------------------------------------------------
Detailed descriptions and default values:~
*'g:ctrlp_map'*
Use this option to change the mapping to invoke CtrlP in |Normal| mode: >
let g:ctrlp_map = '<c-p>'
<
*'g:ctrlp_cmd'*
Set the default opening command to use when pressing the above mapping: >
let g:ctrlp_cmd = 'CtrlP'
<
*'g:loaded_ctrlp'*
Use this to disable the plugin completely: >
let g:loaded_ctrlp = 1
<
*'g:ctrlp_by_filename'*
Set this to 1 to set searching by filename (as opposed to full path) as the
default: >
let g:ctrlp_by_filename = 0
<
Can be toggled on/off by pressing <c-d> inside the prompt.
*'g:ctrlp_regexp'*
Set this to 1 to set regexp search as the default: >
let g:ctrlp_regexp = 0
<
Can be toggled on/off by pressing <c-r> inside the prompt.
*'g:ctrlp_match_window_bottom'*
Set this to 0 to show the match window at the top of the screen: >
let g:ctrlp_match_window_bottom = 1
<
*'g:ctrlp_match_window_reversed'*
Change the listing order of the files in the match window. The default setting
(1) is from bottom to top: >
let g:ctrlp_match_window_reversed = 1
<
*'g:ctrlp_max_height'*
Set the maximum height of the match window: >
let g:ctrlp_max_height = 10
<
*'g:ctrlp_switch_buffer'*
When opening a file with <cr> or <c-t>, if the files already opened somewhere
CtrlP will try to jump to it instead of opening a new instance: >
let g:ctrlp_switch_buffer = 2
<
1 - only jump to the buffer if its opened in the current tab.
2 - jump tab as well if the buffers opened in another tab.
0 - disable this feature.
*'g:ctrlp_reuse_window'*
When opening a file with <cr>, CtrlP avoids opening it in windows created by
plugins, help and quickfix. Use this to setup some exceptions: >
let g:ctrlp_reuse_window = 'netrw'
<
Acceptable values are partial name, filetype or buftype of the special buffers.
Use regexp to specify the pattern.
Example: >
let g:ctrlp_reuse_window = 'netrw\|help\|quickfix'
<
*'g:ctrlp_working_path_mode'*
When starting up, CtrlP sets its local working directory according to this
variable: >
let g:ctrlp_working_path_mode = 2
<
1 - the parent directory of the current file.
2 - the nearest ancestor that contains one of these directories or files:
.git/ .hg/ .svn/ .bzr/ _darcs/
0 - dont manage working directory.
Note: you can use b:ctrlp_working_path_mode (a |b:var|) to set this option on a
per buffer basis.
*'g:ctrlp_root_markers'*
Use this to set your own root markers in addition to the default ones (.git/,
.hg/, .svn/, .bzr/, and _darcs/). Your markers will take precedence: >
let g:ctrlp_root_markers = ['']
<
*'g:ctrlp_use_caching'*
Set this to 0 to disable per-session caching. When disabled, caching will still
be enabled for directories that have more than 4000 files: >
let g:ctrlp_use_caching = 1
<
Note: you can quickly purge the cache by pressing <F5> while inside CtrlP.
*'g:ctrlp_clear_cache_on_exit'*
Set this to 0 to enable cross-session caching by not deleting the cache files
upon exiting Vim: >
let g:ctrlp_clear_cache_on_exit = 1
<
*'g:ctrlp_cache_dir'*
Set the directory to store the cache files: >
let g:ctrlp_cache_dir = $HOME.'/.cache/ctrlp'
<
*'g:ctrlp_dotfiles'*
Set this to 0 if you dont want CtrlP to scan for dotfiles and dotdirs: >
let g:ctrlp_dotfiles = 1
<
You can use |'wildignore'| to exclude anything from the search.
Examples: >
" Excluding version control directories
set wildignore+=*/.git/*,*/.hg/*,*/.svn/* " Linux/MacOSX
set wildignore+=.git\*,.hg\*,.svn\* " Windows
<
Note #1: the `*/` in front of each directory glob is required.
Note #2: |wildignore| influences the result of |expand()|, |globpath()| and
|glob()| which many plugins use to find stuff on the system (e.g. VCS related
plugins look for .git/, .hg/,... some other plugins look for external *.exe
tools on Windows). So be a little mindful of what you put in your |wildignore|.
*'g:ctrlp_custom_ignore'*
In addition to |'wildignore'|, use this for files and directories you want only
CtrlP to not show. Use regexp to specify the patterns: >
let g:ctrlp_custom_ignore = ''
<
Examples: >
let g:ctrlp_custom_ignore = '\.git$\|\.hg$\|\.svn$'
let g:ctrlp_custom_ignore = {
\ 'dir': '\.git$\|\.hg$\|\.svn$',
\ 'file': '\.exe$\|\.so$\|\.dll$',
\ 'link': 'SOME_BAD_SYMBOLIC_LINKS',
\ }
<
Note: ignoring only works when |globpath()| is used to scan for files.
*'g:ctrlp_max_files'*
The maximum number of files to scan, set to 0 for no limit: >
let g:ctrlp_max_files = 10000
<
*'g:ctrlp_max_depth'*
The maximum depth of a directory tree to recurse into: >
let g:ctrlp_max_depth = 40
<
Note: the larger these values, the more memory Vim uses.
*'g:ctrlp_user_command'*
Specify an external tool to use for listing files instead of using Vims
|globpath()|. Use %s in place of the target directory: >
let g:ctrlp_user_command = ''
<
Examples: >
let g:ctrlp_user_command = 'find %s -type f' " MacOSX/Linux
let g:ctrlp_user_command = 'dir %s /-n /b /s /a-d' " Windows
<
You can also use 'grep', 'findstr' or something else to filter the results.
Examples: >
let g:ctrlp_user_command = 'find %s -type f | grep (?!tmp/.*)'
let g:ctrlp_user_command = 'dir %s /-n /b /s /a-d | findstr .*\.py$'
<
Use a version control listing command when inside a repository, this is faster
when scanning large projects: >
let g:ctrlp_user_command = [root_marker, listing_command, fallback_command]
let g:ctrlp_user_command = {
\ 'types': {
\ 1: [root_marker_1, listing_command_1],
\ n: [root_marker_n, listing_command_n],
\ },
\ 'fallback': fallback_command
\ }
<
Examples: >
let g:ctrlp_user_command = ['.git/', 'cd %s && git ls-files']
let g:ctrlp_user_command = ['.hg/', 'hg --cwd %s locate -I .']
let g:ctrlp_user_command = {
\ 'types': {
\ 1: ['.git/', 'cd %s && git ls-files'],
\ 2: ['.hg/', 'hg --cwd %s locate -I .'],
\ },
\ 'fallback': 'find %s -type f'
\ }
<
If the fallback_command is empty or not defined, |globpath()| will then be used
when searching outside a repo.
*'g:ctrlp_max_history'*
The maximum number of input strings you want CtrlP to remember. The default
value mirrors Vims global |'history'| option: >
let g:ctrlp_max_history = &history
<
Set to 0 to disable prompts history. Browse the history with <c-n> and <c-p>.
*'g:ctrlp_open_new_file'*
Use this option to specify how the newly created file is to be opened when
pressing <c-y>:
t - in a new tab
h - in a new horizontal split
v - in a new vertical split
r - in the current window
>
let g:ctrlp_open_new_file = 'v'
<
*'g:ctrlp_open_multiple_files'*
If non-zero, this will enable opening multiple files with <c-z> and <c-o>: >
let g:ctrlp_open_multiple_files = 'v'
<
Example: >
let g:ctrlp_open_multiple_files = '2vr'
<
For the number:
- If given, itll be used as the maximum number of windows or tabs to create
when opening the files (the rest will be opened as hidden buffers).
- If not given, <c-o> will open all files, each in a new window or new tab.
For the letters:
t - each file in a new tab.
h - each file in a new horizontal split.
v - each file in a new vertical split.
Reuse the current window:
tr,
hr,
vr - open the first file in the current window, then the remaining files in
new splits or new tabs just like with t, h, v.
*'g:ctrlp_arg_map'*
When this is set to 1, the <c-o> and <c-y> mappings will accept one extra key
as an argument to override their default behavior: >
let g:ctrlp_arg_map = 0
<
Pressing <c-o> or <c-y> will then prompt for a keypress. The key can be:
t - open in tab(s)
h - open in horizontal split(s)
v - open in vertical split(s)
r - open in current window (for <c-y> only)
<esc>, <c-c> - cancel and go back to the prompt.
Any other key - use the behavior specified with |g:ctrlp_open_new_file| and
|g:ctrlp_open_multiple_files|.
*'g:ctrlp_follow_symlinks'*
Set this to 1 to follow symbolic links when listing files: >
let g:ctrlp_follow_symlinks = 0
<
When enabled, looped internal symlinks will be ignored to avoid duplicates.
*'g:ctrlp_lazy_update'*
Set this to 1 to enable the lazy-update feature: only update the match window
after typings been stopped for a certain amount of time: >
let g:ctrlp_lazy_update = 0
<
If is 1, update after 250ms. If bigger than 1, the number will be used as the
delay time in milliseconds.
*'g:ctrlp_default_input'*
Set this to 1 to enable seeding the prompt with the current files relative
path: >
let g:ctrlp_default_input = 0
<
*'g:ctrlp_use_migemo'*
Set this to 1 to use Migemo Pattern for Japanese filenames. Migemo Search only
works in regexp mode. To split the pattern, separate words with space: >
let g:ctrlp_use_migemo = 0
<
*'g:ctrlp_prompt_mappings'*
Use this to customize the mappings inside CtrlPs prompt to your liking. You
only need to keep the lines that youve changed the values (inside []): >
let g:ctrlp_prompt_mappings = {
\ 'PrtBS()': ['<bs>', '<c-]>'],
\ 'PrtDelete()': ['<del>'],
\ 'PrtDeleteWord()': ['<c-w>'],
\ 'PrtClear()': ['<c-u>'],
\ 'PrtSelectMove("j")': ['<c-j>', '<down>'],
\ 'PrtSelectMove("k")': ['<c-k>', '<up>'],
\ 'PrtSelectMove("t")': ['<Home>', '<kHome>'],
\ 'PrtSelectMove("b")': ['<End>', '<kEnd>'],
\ 'PrtSelectMove("u")': ['<PageUp>', '<kPageUp>'],
\ 'PrtSelectMove("d")': ['<PageDown>', '<kPageDown>'],
\ 'PrtHistory(-1)': ['<c-n>'],
\ 'PrtHistory(1)': ['<c-p>'],
\ 'AcceptSelection("e")': ['<cr>', '<2-LeftMouse>'],
\ 'AcceptSelection("h")': ['<c-x>', '<c-cr>', '<c-s>'],
\ 'AcceptSelection("t")': ['<c-t>'],
\ 'AcceptSelection("v")': ['<c-v>', '<RightMouse>'],
\ 'ToggleFocus()': ['<s-tab>'],
\ 'ToggleRegex()': ['<c-r>'],
\ 'ToggleByFname()': ['<c-d>'],
\ 'ToggleType(1)': ['<c-f>', '<c-up>'],
\ 'ToggleType(-1)': ['<c-b>', '<c-down>'],
\ 'PrtExpandDir()': ['<tab>'],
\ 'PrtInsert("w")': ['<F2>', '<insert>'],
\ 'PrtInsert("s")': ['<F3>'],
\ 'PrtInsert("v")': ['<F4>'],
\ 'PrtInsert("+")': ['<F6>', '<MiddleMouse>'],
\ 'PrtCurStart()': ['<c-a>'],
\ 'PrtCurEnd()': ['<c-e>'],
\ 'PrtCurLeft()': ['<c-h>', '<left>', '<c-^>'],
\ 'PrtCurRight()': ['<c-l>', '<right>'],
\ 'PrtClearCache()': ['<F5>'],
\ 'PrtDeleteEnt()': ['<F7>'],
\ 'CreateNewFile()': ['<c-y>'],
\ 'MarkToOpen()': ['<c-z>'],
\ 'OpenMulti()': ['<c-o>'],
\ 'PrtExit()': ['<esc>', '<c-c>', '<c-g>'],
\ }
<
Note: In some terminals, its not possible to remap <c-h> without also changing
<bs> (|keycodes|). So if pressing <bs> moves the cursor to the left instead of
deleting a char for you, add this to your |.vimrc| to disable the plugins
default <c-h> mapping: >
let g:ctrlp_prompt_mappings = { 'PrtCurLeft()': ['<left>', '<c-^>'] }
<
----------------------------------------
MRU mode options:~
*'g:ctrlp_mruf_max'*
Specify the number of recently opened files you want CtrlP to remember: >
let g:ctrlp_mruf_max = 250
<
*'g:ctrlp_mruf_exclude'*
Files you dont want CtrlP to remember. Use regexp to specify the patterns: >
let g:ctrlp_mruf_exclude = ''
<
Examples: >
let g:ctrlp_mruf_exclude = '/tmp/.*\|/temp/.*' " MacOSX/Linux
let g:ctrlp_mruf_exclude = '^C:\\dev\\tmp\\.*' " Windows
<
*'g:ctrlp_mruf_include'*
And if you want CtrlP to only remember some files, specify them here: >
let g:ctrlp_mruf_include = ''
<
Example: >
let g:ctrlp_mruf_include = '\.py$\|\.rb$'
<
*'g:ctrlp_mruf_relative'*
Set this to 1 to show only MRU files in the current working directory: >
let g:ctrlp_mruf_relative = 0
<
*'g:ctrlp_mruf_default_order'*
Set this to 1 to disable sorting when searching in MRU mode: >
let g:ctrlp_mruf_default_order = 0
<
*'g:ctrlp_mruf_case_sensitive'*
Match this with your file system case-sensitivity setting to avoid duplicate
MRU entries: >
let g:ctrlp_mruf_case_sensitive = 1
<
----------------------------------------
Advanced options:~
*'g:ctrlp_status_func'*
Use this to customize the statuslines for the CtrlP window: >
let g:ctrlp_status_func = {}
<
Example: >
let g:ctrlp_status_func = {
\ 'main': 'Function_Name_1',
\ 'prog': 'Function_Name_2',
\ }
<
Structure of the functions: >
" Main statusline
function! Function_Name_1(focus, byfname, regex, prev, item, next, marked)
" Arguments:
" |
" +- a:focus : The focus of the prompt: "prt" or "win".
" |
" +- a:byfname : In filename mode or in full path mode: "file" or "path".
" |
" +- a:regex : In regex mode: 1 or 0.
" |
" +- a:prev : The previous search mode.
" |
" +- a:item : The current search mode.
" |
" +- a:next : The next search mode.
" |
" +- a:marked : The number of marked files, or a comma separated list of
" the filenames.
return full_statusline
endfunction
" Progress statusline
function! Function_Name_2(str)
" a:str : Either the number of files scanned so far, or a string indicating
" the current directory is being scanned with a user_command.
return full_statusline
endfunction
<
See https://gist.github.com/1610859 for a working example.
*'g:ctrlp_buffer_func'*
Specify the functions that will be called after entering and before exiting the
CtrlP buffer: >
let g:ctrlp_buffer_func = {}
<
Example: >
let g:ctrlp_buffer_func = {
\ 'enter': 'Function_Name_1',
\ 'exit': 'Function_Name_2',
\ }
<
*'g:ctrlp_match_func'*
Set an external fuzzy matching function for CtrlP to use: >
let g:ctrlp_match_func = {}
<
Example: >
let g:ctrlp_match_func = { 'match': 'Function_Name' }
<
Structure of the function: >
function! Function_Name(items, str, limit, mmode, ispath, crfile, regex)
" Arguments:
" |
" +- a:items : The full list of items to search in.
" |
" +- a:str : The string entered by the user.
" |
" +- a:limit : The max height of the match window. Can be used to limit
" | the number of items to return.
" |
" +- a:mmode : The match mode. Can be one of these strings:
" | + "full-line": match the entire line.
" | + "filename-only": match only the filename.
" | + "first-non-tab": match until the first tab char.
" | + "until-last-tab": match until the last tab char.
" |
" +- a:ispath : Is 1 when searching in file, buffer, mru, dir, and rtscript
" | modes. Is 0 otherwise.
" |
" +- a:crfile : The file in the current window. Should be excluded from the
" | results when a:ispath == 1.
" |
" +- a:regex : In regex mode: 1 or 0.
return list_of_matched_items
endfunction
<
===============================================================================
COMMANDS *ctrlp-commands*
*:CtrlP*
:CtrlP [starting-directory]
Open CtrlP in find file mode.
If no argument is given, the value of |g:ctrlp_working_path_mode| will be
used to determine the starting directory.
You can use <tab> to auto-complete the [starting-directory] when typing it.
*:CtrlPBuffer*
:CtrlPBuffer
Open CtrlP in find buffer mode.
*:CtrlPMRU*
:CtrlPMRU
Open CtrlP in find Most-Recently-Used file mode.
*:CtrlPLastMode*
:CtrlPLastMode
Open CtrlP in the last mode used.
*:CtrlPRoot*
:CtrlPRoot
This acts like |:CtrlP| with |g:ctrlp_working_path_mode| = 2 (ignores its
current value).
*:CtrlPClearCache*
:CtrlPClearCache
Flush the cache for the current working directory. The same as pressing <F5>
inside CtrlP.
To enable or disable caching, use the |g:ctrlp_use_caching| option.
*:CtrlPClearAllCaches*
:CtrlPClearAllCaches
Delete all the cache files saved in |g:ctrlp_cache_dir|.
*:CtrlPReload*
:CtrlPReload
Load new values for the option variables.
-------------------------------------------------------------------------------
For commands provided by bundled extensions, see |ctrlp-extensions|.
===============================================================================
MAPPINGS *ctrlp-mappings*
*'ctrlp-<c-p>'*
<c-p>
Default |Normal| mode mapping to open the CtrlP prompt in find file mode.
Once inside the prompt:~
<c-d>
Toggle between full-path search and filename only search.
Note: in filename mode, the prompts base is '>d>' instead of '>>>'
<c-r> *'ctrlp-fullregexp'*
Toggle between the string mode and full regexp mode.
Note: in full regexp mode, the prompts base is 'r>>' instead of '>>>'
See also |input-formats| (guide) and |g:ctrlp_regexp_search| (option).
<c-f>, 'forward'
<c-up>
Scroll to the 'next' search mode in the sequence.
<c-b>, 'backward'
<c-down>
Scroll to the 'previous' search mode in the sequence.
<tab>
Auto-complete directory names under the current working directory inside
the prompt.
<s-tab>
Toggle the focus between the match window and the prompt.
<c-j>,
<down>
Move selection down.
<c-k>,
<up>
Move selection up.
<c-a>
Move the cursor to the 'start' of the prompt.
<c-e>
Move the cursor to the 'end' of the prompt.
<c-h>,
<left>,
<c-^>
Move the cursor one character to the 'left'.
<c-l>,
<right>
Move the cursor one character to the 'right'.
<c-]>,
<bs>
Delete the preceding character.
<del>
Delete the current character.
<c-w>
Delete a preceding inner word.
<c-u>
Clear the input field.
<cr>
Open selected file in the active window if possible.
<c-t>
Open selected file in a new 'tab' after the last tabpage.
<c-v>
Open selected file in a 'vertical' split.
<c-x>,
<c-cr>,
<c-s>
Open selected file in a 'horizontal' split.
<c-y>
Create a new file and its parent directories.
<c-n>
Next string in the prompts history.
<c-p>
Previous string in the prompts history.
<c-z>
- Mark/unmark a file to be opened with <c-o>.
- Or mark/unmark a file to create a new file in its directory using <c-y>.
<c-o>
Open files marked by <c-z>.
<F5>
- Refresh the match window and purge the cache for the current directory.
- Or remove deleted files from the MRU list.
<F7>
- Wipe the MRU list.
- Or delete MRU entries marked by <c-z>.
<insert>
Insert the word under the cursor (in the current buffer) into the prompt.
<esc>,
<c-c>,
<c-g>
Exit CtrlP.
Note: <c-c> can also be used to stop the scan if its taking too long.
Choose your own mappings with |g:ctrlp_prompt_mappings|.
When inside the match window (press <s-tab> to switch):~
a-z
0-9
~^-=;`',.+!@#$%&_(){}[]
Cycle through the lines with the first letter (of paths or filenames) that
matches that key.
===============================================================================
INPUT FORMATS *ctrlp-input-formats*
Formats for inputting in the prompt:~
a) Simple string.
E.g. 'abc' is understood internally as 'a[^a]\{-}b[^b]\{-}c'
b) When in regexp mode, the input strings treated as a Vims regexp |pattern|
without any modification.
E.g. 'abc\d*efg' will be read as 'abc\d*efg'.
See |ctrlp-fullregexp| (keymap) and |g:ctrlp_regexp_search| (option) for
how to enable regexp mode.
c) End the string with a colon ':' followed by a Vim command to execute that
command after opening the file. If you need to use ':' literally, escape it
with a backslash: '\:'. When opening multiple files, the command will be
executed on each opening file.
E.g. 'abc:45' will open the selected file and jump to line 45.
'abc:/any\:string' will open the selected file and jump to the first
instance of 'any:string'.
'abc:+setf\ myfiletype|50' will open the selected file and set its
filetype to 'myfiletype', then jump to line 50.
'abc:diffthis' will open the selected files and run |:diffthis| on the
first 4 files (if marked).
See also Vims |++opt| and |+cmd|.
d) Type exactly two dots '..' at the start of the prompt and press enter to go
backward in the directory tree by 1 level. If the parent directory is
large, this might be slow.
e) Similarly, submit '/' or '\' to find and go to the projects root. If the
project is large, using a VCS listing command to look for files might help
speeding up the intial scan (see |g:ctrlp_user_command| for more details).
Note: e) and d) only work in find file mode and directory mode.
f) Type the name of a non-existent file and press <c-y> to create it. Mark a
file with <c-z> to create the new file in the same directory as the marked
file.
E.g. 'parentdir/newfile.txt' will create a directory named 'parentdir' as
well as 'newfile.txt'.
If 'some/old/dirs/oldfile.txt' is marked with <c-z>, then 'parentdir'
and 'newfile.txt' will be created in 'some/old/dirs'. The final path
will then be 'some/old/dirs/parentdir/newfile.txt'.
Use '\' in place of '/' on Windows (if |'ssl'| is not set).
g) Submit ? to open this help file.
===============================================================================
EXTENSIONS *ctrlp-extensions*
Extensions are optional. To enable an extension, add its name to the variable
g:ctrlp_extensions: >
let g:ctrlp_extensions = ['tag', 'buffertag', 'quickfix', 'dir', 'rtscript',
\ 'undo', 'line', 'changes', 'mixed', 'bookmarkdir']
<
The order of the items will be the order they appear on the statusline and when
using <c-f>, <c-b>.
Available extensions:~
*:CtrlPTag*
* Tag mode:~
- Name: 'tag'
- Command: ':CtrlPTag'
- Search for a tag within a generated central tags file, and jump to the
definition. Use the Vims option |'tags'| to specify the names and the
locations of the tags file(s).
E.g. set tags+=doc/tags
*:CtrlPBufTag*
*:CtrlPBufTagAll*
* Buffer Tag mode:~
- Name: 'buffertag'
- Commands: ':CtrlPBufTag [buffer]',
':CtrlPBufTagAll'.
- Search for a tag within the current buffer or all listed buffers and jump
to the definition. Requires |exuberant_ctags| or compatible programs.
*:CtrlPQuickfix*
* Quickfix mode:~
- Name: 'quickfix'
- Command: ':CtrlPQuickfix'
- Search for an entry in the current quickfix errors and jump to it.
*:CtrlPDir*
* Directory mode:~
- Name: 'dir'
- Command: ':CtrlPDir [starting-directory]'
- Search for a directory and change the working directory to it.
- Mappings:
+ <cr> change the local working directory for CtrlP and keep it open.
+ <c-t> change the global working directory (exit).
+ <c-v> change the local working directory for the current window (exit).
+ <c-x> change the global working directory to CtrlPs current local
working directory (exit).
*:CtrlPRTS*
* Runtime script mode:~
- Name: 'rtscript'
- Command: ':CtrlPRTS'
- Search for files (vimscripts, docs, snippets...) in runtimepath.
*:CtrlPUndo*
* Undo mode:~
- Name: 'undo'
- Command: ':CtrlPUndo'
- Browse undo history.
*:CtrlPLine*
* Line mode:~
- Name: 'line'
- Command: ':CtrlPLine'
- Search for a line in all listed buffers.
*:CtrlPChange*
*:CtrlPChangeAll*
* Change list mode:~
- Name: 'changes'
- Commands: ':CtrlPChange [buffer]',
':CtrlPChangeAll'.
- Search for and jump to a recent change in the current buffer or in all
listed buffers.
*:CtrlPMixed*
* Mixed mode:~
- Name: 'mixed'
- Command: ':CtrlPMixed'
- Search in files, buffers and MRU files at the same time.
*:CtrlPBookmarkDir*
*:CtrlPBookmarkDirAdd*
* BookmarkDir mode:~
- Name: 'bookmarkdir'
- Commands: ':CtrlPBookmarkDir',
':CtrlPBookmarkDirAdd [directory]'.
- Search for a bookmarked directory and change the working directory to it.
- Mappings:
+ <cr> change the local working directory for CtrlP, keep it open and
switch to find file mode.
+ <c-x> change the global working directory (exit).
+ <c-v> change the local working directory for the current window (exit).
+ <F7>
- Wipe bookmark list.
- Or delete entries marked by <c-z>.
----------------------------------------
Buffer Tag mode options:~
*'g:ctrlp_buftag_ctags_bin'*
If ctags isnt in your $PATH, use this to set its location: >
let g:ctrlp_buftag_ctags_bin = ''
<
*'g:ctrlp_buftag_systemenc'*
Match this with your OSs encoding (not Vims). The default value mirrors Vims
global |'encoding'| option: >
let g:ctrlp_buftag_systemenc = &encoding
<
*'g:ctrlp_buftag_types'*
Use this to set the arguments for ctags, jsctags... for a given filetype: >
let g:ctrlp_buftag_types = ''
<
Examples: >
let g:ctrlp_buftag_types = {
\ 'erlang' : '--language-force=erlang --erlang-types=drmf',
\ 'javascript' : {
\ 'bin': 'jsctags',
\ 'args': '-f -',
\ },
\ }
<
===============================================================================
CUSTOMIZATION *ctrlp-customization*
Highlighting:~
* For the CtrlP buffer:
CtrlPNoEntries : the message when no match is found (Error)
CtrlPMatch : the matched pattern (Identifier)
CtrlPLinePre : the line prefix '>' in the match window
CtrlPPrtBase : the prompts base (Comment)
CtrlPPrtText : the prompts text (|hl-Normal|)
CtrlPPrtCursor : the prompts cursor when moving over the text (Constant)
* In extensions:
CtrlPTabExtra : the part of each line thats not matched against (Comment)
CtrlPBufName : the buffer name an entry belongs to (|hl-Directory|)
CtrlPTagKind : the kind of the tag in buffer-tag mode (|hl-Title|)
CtrlPqfLineCol : the line and column numbers in quickfix mode (Comment)
CtrlPUndoT : the elapsed time in undo mode (|hl-Directory|)
CtrlPUndoBr : the square brackets [] in undo mode (Comment)
CtrlPUndoNr : the undo number inside [] in undo mode (String)
CtrlPUndoSv : the point where the file was saved (Comment)
CtrlPUndoPo : the current position in the undo tree (|hl-Title|)
CtrlPBookmark : the name of the bookmark (Identifier)
Statuslines:~
* Highlight groups:
CtrlPMode1 : 'prt' or 'win', also for 'regex' (Character)
CtrlPMode2 : 'file' or 'path', also for the local working dir (|hl-LineNr|)
CtrlPStats : the scanning status (Function)
For rebuilding the statuslines, see |g:ctrlp_status_func|.
===============================================================================
MISCELLANEOUS CONFIGS *ctrlp-miscellaneous-configs*
* Use |wildignore| for |g:ctrlp_user_command|:
>
function! s:wig2cmd()
" Change wildignore into space or | separated groups
" e.g. .aux .out .toc .jpg .bmp .gif
" or .aux$\|.out$\|.toc$\|.jpg$\|.bmp$\|.gif$
let pats = ['[*\/]*\([?_.0-9A-Za-z]\+\)\([*\/]*\)\(\\\@<!,\|$\)','\\\@<!,']
let subs = has('win32') || has('win64') ? ['\1\3', ' '] : ['\1\2\3', '\\|']
let expr = substitute(&wig, pats[0], subs[0], 'g')
let expr = substitute(expr, pats[1], subs[1], 'g')
let expr = substitute(expr, '\\,', ',', 'g')
" Set the user_command option
let g:ctrlp_user_command = has('win32') || has('win64')
\ ? 'dir %s /-n /b /s /a-d | findstr /V /l "'.expr.'"'
\ : 'find %s -type f | grep -v "'.expr .'"'
endfunction
call s:wig2cmd()
<
(submitted by Rich Alesi <github.com/ralesi>)
* A standalone function to set the working directory to the projects root, or
to the parent directory of the current file if a root cant be found:
>
function! s:setcwd()
let cph = expand('%:p:h', 1)
if match(cph, '\v^<.+>://') >= 0 | retu | en
for mkr in ['.git/', '.hg/', '.svn/', '.bzr/', '_darcs/', '.vimprojects']
let wd = call('find'.(mkr =~ '/$' ? 'dir' : 'file'), [mkr, cph.';'])
if wd != '' | let &acd = 0 | brea | en
endfo
exe 'lc!' fnameescape(wd == '' ? cph : substitute(wd, mkr.'$', '.', ''))
endfunction
autocmd BufEnter * call s:setcwd()
<
(requires Vim 7.1.299+)
===============================================================================
CREDITS *ctrlp-credits*
Developed by Kien Nguyen <github.com/kien>.
Projects homepage: http://kien.github.com/ctrlp.vim
Git repository: https://github.com/kien/ctrlp.vim
Mercurial repository: https://bitbucket.org/kien/ctrlp.vim
-------------------------------------------------------------------------------
Thanks to everyone that has submitted ideas, bug reports or helped debugging on
gibhub, bitbucket, and through email.
Special thanks:~
* Woojong Koh <github.com/wjkoh>
* Simon Ruderich
* Yasuhiro Matsumoto <github.com/mattn>
* Ken Earley <github.com/kenearley>
* Kyo Nagashima <github.com/hail2u>
* Zak Johnson <github.com/zakj>
* Diego Viola <github.com/diegoviola>
* Piet Delport <github.com/pjdelport>
* Thibault Duplessis <github.com/ornicar>
* Kent Sibilev <github.com/datanoise>
* Tacahiroy <github.com/tacahiroy>
* Luca Pette <github.com/lucapette>
===============================================================================
CHANGELOG *ctrlp-changelog*
+ New option: |g:ctrlp_mruf_default_order|
+ New feature: Bookmarked directories extension.
+ New commands: |:CtrlPBookmarkDir|
|:CtrlPBookmarkDirAdd|
Before 2012/04/15~
+ New option: |g:ctrlp_buffer_func|, callback functions for CtrlP buffer.
+ Remove: g:ctrlp_mruf_last_entered, make it a default for MRU mode.
+ New commands: |:CtrlPLastMode|, open CtrlP in the last mode used.
|:CtrlPMixed|, search in files, buffers and MRU files.
Before 2012/03/31~
+ New options: |g:ctrlp_default_input|, default input when entering CtrlP.
|g:ctrlp_match_func|, allow using a custom fuzzy matcher.
+ Rename:
*ClearCtrlPCache* -> |CtrlPClearCache|
*ClearAllCtrlPCaches* -> |CtrlPClearAllCaches|
*ResetCtrlP* -> |CtrlPReload|
Before 2012/03/02~
+ Rename:
*g:ctrlp_regexp_search* -> |g:ctrlp_regexp|,
*g:ctrlp_dont_split* -> |g:ctrlp_reuse_window|,
*g:ctrlp_jump_to_buffer* -> |g:ctrlp_switch_buffer|.
+ Rename and tweak:
*g:ctrlp_open_multi* -> |g:ctrlp_open_multiple_files|.
+ Deprecate *g:ctrlp_highlight_match*
+ Extend |g:ctrlp_user_command| to support multiple commands.
+ New option: |g:ctrlp_mruf_last_entered| change MRU to Recently-Entered.
Before 2012/01/15~
+ New mapping: Switch <tab> and <s-tab>. <tab> is now used for completion
of directory names under the current working directory.
+ New options: |g:ctrlp_arg_map| for <c-y>, <c-o> to accept an argument.
|g:ctrlp_status_func| custom statusline.
|g:ctrlp_mruf_relative| show only MRU files inside cwd.
+ Extend g:ctrlp_open_multi with new optional values: tr, hr, vr.
+ Extend |g:ctrlp_custom_ignore| to specifically filter dir, file and link.
Before 2012/01/05~
+ New feature: Buffer Tag extension.
+ New commands: |:CtrlPBufTag|, |:CtrlPBufTagAll|.
+ New options: |g:ctrlp_cmd|,
|g:ctrlp_custom_ignore|
Before 2011/11/30~
+ New features: Tag, Quickfix and Directory extensions.
+ New commands: |:CtrlPTag|, |:CtrlPQuickfix|, |:CtrlPDir|.
+ New options: |g:ctrlp_use_migemo|,
|g:ctrlp_lazy_update|,
|g:ctrlp_follow_symlinks|
Before 2011/11/13~
+ New special input: '/' and '\' find root (|ctrlp-input-formats| (e))
+ Remove ctrlp#SetWorkingPath().
+ Remove *g:ctrlp_mru_files* and make MRU mode permanent.
+ Extend g:ctrlp_open_multi, add new ways to open files.
+ New option: g:ctrlp_dont_split,
|g:ctrlp_mruf_case_sensitive|
Before 2011/10/30~
+ New feature: Support for custom extensions.
<F5> also removes non-existent files from MRU list.
+ New option: g:ctrlp_jump_to_buffer
Before 2011/10/12~
+ New features: Open multiple files.
Pass Vims |++opt| and |+cmd| to the opening file
(|ctrlp-input-formats| (c))
Auto-complete each dir for |:CtrlP| [starting-directory]
+ New mappings: <c-z> mark/unmark a file to be opened with <c-o>.
<c-o> open all marked files.
+ New option: g:ctrlp_open_multi
+ Remove *g:ctrlp_persistent_input* *g:ctrlp_live_update* and <c-^>.
Before 2011/09/29~
+ New mappings: <c-n>, <c-p> next/prev string in the input history.
<c-y> create a new file and its parent dirs.
+ New options: |g:ctrlp_open_new_file|,
|g:ctrlp_max_history|
+ Added a new open-in-horizontal-split mapping: <c-x>
Before 2011/09/19~
+ New command: ResetCtrlP
+ New options: |g:ctrlp_max_files|,
|g:ctrlp_max_depth|,
g:ctrlp_live_update
+ New mapping: <c-^>
Before 2011/09/12~
+ Ability to cycle through matched lines in the match window.
+ Extend the behavior of g:ctrlp_persistent_input
+ Extend the behavior of |:CtrlP|
+ New options: |g:ctrlp_dotfiles|,
|g:ctrlp_clear_cache_on_exit|,
g:ctrlp_highlight_match,
|g:ctrlp_user_command|
+ New special input: '..' (|ctrlp-input-formats| (d))
+ New mapping: <F5>.
+ New commands: |:CtrlPCurWD|,
|:CtrlPCurFile|,
|:CtrlPRoot|
+ New feature: Search in most recently used (MRU) files
+ New mapping: <c-b>.
+ Extended the behavior of <c-f>.
+ New options: g:ctrlp_mru_files,
|g:ctrlp_mruf_max|,
|g:ctrlp_mruf_exclude|,
|g:ctrlp_mruf_include|
+ New command: |:CtrlPMRU|
First public release: 2011/09/06~
===============================================================================
vim:ft=help:et:ts=2:sw=2:sts=2:norl