ctrlp.vim/doc/ctrlp.txt

*ctrlp.txt*       Full path fuzzy file finder for Vim.
*CtrlP* *ControlP* *'ctrlp'* *'ctrl-p'*
===============================================================================
#                                                                             #
#          :::::::: ::::::::::: :::::::::  :::             :::::::::          #
#         :+:    :+:    :+:     :+:    :+: :+:             :+:    :+:         #
#         +:+           +:+     +:+    +:+ +:+             +:+    +:+         #
#         +#+           +#+     +#++:++#:  +#+             +#++:++#+          #
#         +#+           +#+     +#+    +#+ +#+             +#+                #
#         #+#    #+#    #+#     #+#    #+# #+#             #+#                #
#          ########     ###     ###    ### ##########      ###                #
#                                                                             #
===============================================================================
CONTENTS                                                       *ctrlp-contents*

    1.Intro...................................|ctrlp-intro|
    2.Options.................................|ctrlp-options|
    3.Commands................................|ctrlp-commands|
    4.Mappings................................|ctrlp-mappings|
    5.Input Formats...........................|ctrlp-input-formats|
    6.Credits.................................|ctrlp-credits|

===============================================================================
1. Intro                                                          *ctrlp-intro*

Full path fuzzy file finder with an intuitive interface. Has full support for
Vim’s |regexp| as search pattern, and more.

See also |ctrlp-input-formats| and |ctrlp-fullregexp|.

===============================================================================
2. Options                                                      *ctrlp-options*

Below are the available options and their default values.

                                                                *'g:ctrlp_map'*
Use this option to change the mapping to invoke |CtrlP| in |Normal| mode: >
  let g:ctrlp_map = '<c-p>'
<

                                                             *'g:loaded_ctrlp'*
Use this option to disable the plugin completely: >
  let g:loaded_ctrlp = 1
<

                                              *'g:ctrlp_match_window_reversed'*
Reverse the sort order of the matched files in the match window. The default
setting is from bottom to top: >
  let g:ctrlp_match_window_reversed = 1
<

                                                  *'g:ctrlp_persistence_input'*
Remember the last input string and position of the selection in the match
window: >
  let g:ctrlp_persistence_input = 1
<

                                                       *'g:ctrlp_split_window'*
Use this option to specify how the file is to be opened when pressing <cr>:
  1 - in a new tab
  2 - in a new horizontal split
  3 - in a new vertical split
  0 - in the current window/split
>
  let g:ctrlp_split_window = 0
<

                                                       *'g:ctrlp_ignore_space'*
if you want the search to include whitespaces, change this to 0: >
  let g:ctrlp_ignore_space = 1
<

                                                  *'g:ctrlp_working_path_mode'*
                                                             *SetWorkingPath()*
When starting up the prompt, automatically set the working directory (i.e. the
|current-directory|) to:
  1 - the parent directory of the current file.
  2 - the nearest ancestor that contains one of these directories/files:
      .git/
      .hg/
      .bzr/
      _darcs/
      root.dir
      .vimprojects
  0 - don’t manage working directory.
>
  let g:ctrlp_working_path_mode = 1
<
You can use this functionality outside of |CtrlP| by adding the following line
to your |.vimrc|; the parameter is the same (1, 2 and 0): >
  au BufEnter * cal ctrlp#SetWorkingPath(2)
<

                                                         *'g:ctrlp_max_height'*
Set the maximum height of the match window: >
  let g:ctrlp_max_height = 10
<

                                                      *'g:ctrlp_regexp_search'*
Set this to 1 to set full |regexp| search as the default mode: >
  let g:ctrlp_regexp_search = 0
<

                                                          *'g:ctrlp_cache_dir'*
Set the parent directory for the '.ctrlp_cache' directory: >
  let g:ctrlp_cache_dir = $HOME
<

                                                        *'g:ctrlp_use_caching'*
Set this to 1 to always enable caching (flat files). Caching’s also temporarily
enabled if the working directory has more than 4000 files: >
  let g:ctrlp_use_caching = 0
<

                                                        *'g:ctrlp_by_filename'*
Set this to 1 to set search by file-name (not full path) as the default: >
  let g:ctrlp_by_filename = 0
<

                                                    *'g:ctrlp_prompt_mappings'*
Use this to customize the mappings inside |CtrlP|’s prompt to your liking. You
only need to keep the lines that you’ve changed the values (inside []): >
  let g:ctrlp_prompt_mappings = {
    \ 'PrtBS()':                    ['<bs>'],
    \ 'PrtDelete()':                ['<del>'],
    \ 'PrtDeleteWord()':            ['<c-w>'],
    \ 'PrtClear()':                 ['<c-u>'],
    \ 'PrtSelectMove("j")':         ['<c-n>', '<c-j>', '<down>'],
    \ 'PrtSelectMove("k")':         ['<c-p>', '<c-k>', '<up>'],
    \ 'AcceptSelection("e")':       ['<cr>'],
    \ 'AcceptSelection("h")':       ['<c-cr>', '<c-s>'],
    \ 'AcceptSelection("t")':       ['<c-t>'],
    \ 'AcceptSelection("v")':       ['<c-v>'],
    \ 'ToggleFocus()':              ['<tab>'],
    \ 'ToggleRegex()':              ['<c-r>'],
    \ 'ToggleByFname()':            ['<c-d>'],
    \ 'ToggleType()':               ['<c-f>'],
    \ 'PrtCurStart()':              ['<c-a>'],
    \ 'PrtCurEnd()':                ['<c-e>'],
    \ 'PrtCurLeft()':               ['<c-h>', '<left>'],
    \ 'PrtCurRight()':              ['<c-l>', '<right>'],
    \ 'BufOpen("ControlP", "del")': ['<esc>', '<c-c>', '<c-g>'],
    \ }
<

===============================================================================
3. Commands                                                    *ctrlp-commands*

                                                                       *:CtrlP*
:CtrlP
   Open the |CtrlP| prompt in find file mode.
                                                                 *:CtrlPBuffer*
:CtrlPBuffer
   Open the |CtrlP| prompt in find buffer mode.

                                                             *:ClearCtrlPCache*
:ClearCtrlPCache
   Flush the cache for the current working directory.

                                                         *:ClearAllCtrlPCaches*
:ClearAllCtrlPCaches
   Delete all the saved cache files in |ctrlp_cache_dir|.

===============================================================================
4. Mappings                                                    *ctrlp-mappings*

                                                                *'ctrlp-<c-p>'*
<c-p>
   Default |Normal| mode mapping to open the |CtrlP| prompt.

Once inside the prompt:

  <c-r>                                                    *'ctrlp-fullregexp'*
    Toggle between the smart |regexp|/string mode (section 5.b) and full
    |regexp| mode.
    (note: in full |regexp| mode, the prompt’s base is 'r>>' instead of '>>>')

    See also |input-formats|.

  <c-d>
    Toggle between full path search and filename only search.
    (note: in filename mode, the prompt’s base is '>d>' instead of '>>>')

  <c-f>
    Toggle between searching files and searching buffers.

  <tab>
    Toggle the focus between the match window and the prompt.

  <c-n>,
  <c-j>,
  <down>
    Move selection down

  <c-p>,
  <c-k>,
  <up>
    Move selection up

  <c-a>
    Move the cursor to the 'start' of the prompt

  <c-e>
    Move the cursor to the 'end' of the prompt

  <c-h>,
  <left>
    Move the cursor one character to the 'left'

  <c-l>,
  <right>
    Move the cursor one character to the 'right'

  <c-w>
    Delete a preceding (inner) word

  <c-u>
    Clear the input field

  <cr>
    Open selected file with the method specified with |g:ctrlp_split_window|

  <c-t>
    Open selected file in a new 'tab'

  <c-v>
    Open selected file in a 'vertical' split

  <c-cr>,
  <c-s>
    Open selected file in a 'horizontal' split

  <esc>,
  <c-c>,
  <c-g>
    Exit |CtrlP|

Chose your own mappings with |g:ctrlp_prompt_mappings|.

===============================================================================
5. Input Formats                                          *ctrlp-input-formats*

                                                   *ctrlp-prompt-input-formats*
Formats for inputting in the prompt:

a)  Simple string. e.g. 'abc' is understood internally as 'a.*b.*c'

b)  Vim |regexp|. If the input string contains '*', '^', '$', '+' or '$', it’ll
    be treated as a Vim’s |regexp| |pattern| without any modification.
    e.g. 'abc\d*efg' will be read as 'abc\d*efg'.

    See also |ctrlp-fullregexp|.

c)  Strings end with a colon ':' followed by an arbitrary number will be read
    as a line number to jump to after opening the file.
    e.g. 'abc:45' will open the selected file and jump to line 45.

===============================================================================
6. Credits                                                      *ctrlp-credits*

Developed by Kien Nguyen (github.com/kien), based on the Command-T and the
LustyExplorer plugins. No code was taken from these plugins, but I did clone
the majority of their (awesome) interfaces and the way they work.

This was originally written as a module for a would-be larger plugin called
AutoDoc.vim which I’ve stopped developing because of lost of interest. I really
liked the way Command-T and LustyExplorer deal with user’s input, so I
wrote a pure Vimscript version of their prompt window, intended to use it for
the aforementioned plugin.

Git repository:       https://github.com/kien/ctrlp.vim
Mercurial repository: https://bitbucket.org/kien/ctrlp.vim

===============================================================================
vim:nofen:et:ts=2:sw=2:sts=2