Open the quickfix window to full width at the bottom of the screen with
its height set to fit all entries. This behavior can be overridden by
using the YcmQuickFixOpened autocommand.
Add a new section for autocommands in the documentation.
Update GoTo and ReplaceChunks tests.
Add warning about Python 2.7.11 bug to FAQ
# PR Prelude
Thank you for working on YCM! :)
**Please complete these steps and check these boxes (by putting an `x` inside
the brackets) _before_ filing your PR:**
- [x] I have read and understood YCM's [CONTRIBUTING][cont] document.
- [x] I have read and understood YCM's [CODE_OF_CONDUCT][code] document.
- [x] I have included tests for the changes in my PR. If not, I have included a
rationale for why I haven't.
- [x] **I understand my PR may be closed if it becomes obvious I didn't
actually perform all of these steps.**
# Why this change is necessary and useful
[Please explain **in detail** why the changes in this PR are needed.]
[cont]: https://github.com/Valloric/YouCompleteMe/blob/master/CONTRIBUTING.md
[code]: https://github.com/Valloric/YouCompleteMe/blob/master/CODE_OF_CONDUCT.md
There is a bug in vim with Python 2.7.11 on Windows. Adding information in the FAQ.
This is a modification of this pull request: https://github.com/Valloric/YouCompleteMe/pull/2122.
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="35" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/valloric/youcompleteme/2128)
<!-- Reviewable:end -->
Add how to build python to avoid startup problems (in particular, pyenv)
# PR Prelude
Thank you for working on YCM! :)
**Please complete these steps and check these boxes (by putting an `x` inside
the brackets) _before_ filing your PR:**
- [X] I have read and understood YCM's [CONTRIBUTING][cont] document.
- [X] I have read and understood YCM's [CODE_OF_CONDUCT][code] document.
- [X] I have included tests for the changes in my PR. If not, I have included a
rationale for why I haven't.
- [X] **I understand my PR may be closed if it becomes obvious I didn't
actually perform all of these steps.**
# Why this change is necessary and useful
I spent a while trying to find where I had written the instructions for building python with pyenv to work with YCM, then I thought the README was a good place for it.
ycmd must use pythons with `--enable-shared` or `--enable-framework` else boom.
[cont]: https://github.com/Valloric/YouCompleteMe/blob/master/CONTRIBUTING.md
[code]: https://github.com/Valloric/YouCompleteMe/blob/master/CODE_OF_CONDUCT.md
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="35" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/valloric/youcompleteme/2083)
<!-- Reviewable:end -->
[READY] Rename ycmd python option
# PR Prelude
Thank you for working on YCM! :)
**Please complete these steps and check these boxes (by putting an `x` inside
the brackets) _before_ filing your PR:**
- [x] I have read and understood YCM's [CONTRIBUTING][cont] document.
- [x] I have read and understood YCM's [CODE_OF_CONDUCT][code] document.
- [x] I have included tests for the changes in my PR. If not, I have included a
rationale for why I haven't.
- [x] **I understand my PR may be closed if it becomes obvious I didn't
actually perform all of these steps.**
# Why this change is necessary and useful
[Please explain **in detail** why the changes in this PR are needed.]
[cont]: https://github.com/Valloric/YouCompleteMe/blob/master/CONTRIBUTING.md
[code]: https://github.com/Valloric/YouCompleteMe/blob/master/CODE_OF_CONDUCT.md
As requested in https://github.com/Valloric/YouCompleteMe/issues/2052#issuecomment-195631106 I'm sending this PR. I've marked it as WIP because I've renamed only the `ycmd` option and that is because keeping the backward compatibility here was straight forward since is a client only option. For the jedihttp option instead I would like some opinion on how to procede: should we keep the backward compatibility here on the client or should we make the backward compatibility layer on the ycmd side? Keeping it here would be easier but it would mean that other clients should implement this theirself. Thoughts?
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="35" align="absmiddle" alt="Review on Reviewable"/>](https://reviewable.io/reviews/valloric/youcompleteme/2054)
<!-- Reviewable:end -->
[READY] Fix multiline title entry in FAQ
Apparently, it is not possible to write a header on multiple lines using the `#` syntax in markdown, so we write it on one line.
Update the vim docs too.
<!-- Reviewable:start -->
[<img src="https://reviewable.io/review_button.svg" height="40" alt="Review on Reviewable"/>](https://reviewable.io/reviews/valloric/youcompleteme/2035)
<!-- Reviewable:end -->
[READY] Add --all option to README
# PR Prelude
Thank you for working on YCM! :)
**Please complete these steps and check these boxes (by putting an `x` inside
the brackets) _before_ filing your PR:**
- [X] I have read and understood YCM's [CONTRIBUTING][cont] document.
- [X] I have read and understood YCM's [CODE_OF_CONDUCT][code] document.
- [X] I have included tests for the changes in my PR. If not, I have included a
rationale for why I haven't.
- [X] **I understand my PR may be closed if it becomes obvious I didn't
actually perform all of these steps.**
# Why this change is necessary and useful
I use the `--all` flag for every build. I know this is probably a flag that's more useful for YCM contributors than most users, but it makes sense to document it.
# No tests
It's only an update to the README, so I just tested it by eyeballing the output.
[cont]: https://github.com/Valloric/YouCompleteMe/blob/master/CONTRIBUTING.md
[code]: https://github.com/Valloric/YouCompleteMe/blob/master/CODE_OF_CONDUCT.md
<!-- Reviewable:start -->
[<img src="https://reviewable.io/review_button.svg" height="40" alt="Review on Reviewable"/>](https://reviewable.io/reviews/valloric/youcompleteme/2027)
<!-- Reviewable:end -->
[READY] Making YCM run in Vim with only python3
Since https://github.com/Valloric/ycmd/pull/358, ycmd has supported Python 3. Now's the time to make the YCM client work in Python 3 too. As with the ycmd PR, **until we merge this, no other code-changing PR should be merged.** We need to get to a state where we have green Travis for Python 3 before any other PRs start landing.
This was substantially easier than porting ycmd, but it was still a massive pain. It's likely to fail in certain corner cases, so please give this a spin!
The best way to test it out is to build a Vim that has only Python 3 support. Our wiki page on [building Vim from source](https://github.com/Valloric/YouCompleteMe/wiki/Building-Vim-from-source) is a great start; you'll probably need to change `--enable-pythoninterp` to `--enable-python3interp` and similar for `--with-python-config-dir`. Or just get yourself a beta image of Ubuntu 16.04 LTS and run it in a VM (16.04 doesn't even ship Python 2 in the base image!). You can verify that you're running the right Vim by looking at the output of `vim --version`. It should have `-python` and `+python3`.
<!-- Reviewable:start -->
[<img src="https://reviewable.io/review_button.svg" height="40" alt="Review on Reviewable"/>](https://reviewable.io/reviews/valloric/youcompleteme/2016)
<!-- Reviewable:end -->
Make headings and TOC entries have the same text.
Use Title Case for TOC entries.
Add "Miscellaneous commands" and "Functions" entries.
Set "And That's not all..." heading in bold instead.
Move "Diagnostic highlighting groups" to a third-level entry.
Additionally, we restructure subcommands section to organise by
command type.
There are now a significant number of subcommands offering quite
powerful features. A flat-list of such commands is not easy for users to
discover (citation needed). Restructured into:
- GoTo commands
- Documenation/type information commands
- FixIt/refactor commands
This has the following benefits:
- features are more discoverable to the user (due to contents page
update)
- more obvious where to add new subcommand documentation
- a place to write notes which apply to multiple commands (such as
jump lists, multi-file refactor)
[READY] Update Go documentation with GoTo subcommands
This also updates to latest ycmd. Changes that affect the client:
- update racerd;
- add GoTo support for Go completer;
- add concurrent requests for Typescript completer;
- fix issue #1953;
- add GoToReferences support for Typescript completer.
I changed the filetypes lists to be in alphabetical order, except the C-family languages.
<!-- Reviewable:start -->
[<img src="https://reviewable.io/review_button.svg" height="40" alt="Review on Reviewable"/>](https://reviewable.io/reviews/valloric/youcompleteme/1965)
<!-- Reviewable:end -->
[READY] Update CMake generators for MSVC in README
Following PR Valloric/ycmd#285, older versions of CMake (< 3.0) don't support the MSVC generator names with the year component but newer versions accept both formats. So, replace the generator names in README.md by the old ones.
<!-- Reviewable:start -->
[<img src="https://reviewable.io/review_button.png" height=40 alt="Review on Reviewable"/>](https://reviewable.io/reviews/valloric/youcompleteme/1893)
<!-- Reviewable:end -->
This covers users that have already installed YCM before and are looking
to set up Rust completion. They're unlikely to start reading from the
Installation section, so we mention the need for the new build flag to
prevent "why doesn't it work for me" confusion.
- Fix some subordinate clause gymnastics
- Signpost the tern configuration advice better
- Signpost the link to the Tern docs better
- Sort out some bullet-list issues
Update subcommmands supported for typescript
Noticed that the subcommands supported by typescript are not listed. Updated the docs and ran
```
vim-tools/html2vimdoc.py -f youcompleteme README.md > doc/youcompleteme.txt
```
No need to mention semantic engine submodule conf because correct
submodule checkout is mandatory (and has been for years) for YCM to work
correctly. Not to mention that ycmd is what has the Jedi/OmniSharp
submodules now, not YCM itself.
This is required to allow the ycmd GetType and GetParent subcommands to echo
their reults in vim. The apporach is to display any text returned from a
subcommand in the 'message' property assuming that the command is not a known
'GoTo' command.
When I initially released this project, I released it under my own copyright. I
have since then worked on it in my 20% time at Google (and want to continue
doing this) and my life becomes much simpler if the copyright is Google's.
From the perspective of how this project is run and managed, **NOTHING**
changes. YCM is not a Google product, merely a project run by someone who just
happens to work for Google.
Please note that the license of the project is **NOT** changing.
People sending in future pull requests will have to sign the Google
[CLA](https://developers.google.com/open-source/cla/individual) (you can sign
online at the bottom of that page) before those pull requests could be merged
in. People who sent in pull requests that were merged in the past will get an
email from me asking them to sign the CLA as well.
This option existed so that the user can tweak it if they found the default idle
timeout too short, for instance if they leave their machine on over the weekend.
This use case is now covered by the new YcmdKeepalive system that pings ycmd
every 10 minutes as long as Vim is running. This prevents ycmd shutting down if
one leaves their Vim instance alone for a long time.
Thus the old option is useless now; ycmd now shuts down after 3 hours of
inactivity, which should only ever happen when its corresponding Vim instance
has shut down abnormally.
