Dent

The Hitchhikers 2015 robot

Features

Subsystems

• Mecanum drivetrain
• Collector to collect totes in main elevator
• Internal elevator for totes
• External elevator for bins or totes
• Pneumatics for opening/closing bin elevator arms (unused)

Sensors

• Ultrasonic to check if a tote is in the robot (unused)
• hall effect sensors to check the elevator's position

Automated Commands

• AutoDrive to drive forward without a joystick
• CollectTote to drive forwards and roll in collectors in parallel
• ReleaseTote to drive backwards and roll out collectors in parallel
• Turn to turn the robot

Running the code

Setup (for Linux)

• Make sure you have the toolchain installed
• Edit the path of WPILib and the REMOTEIP on the Makefile
• Run make putkey to put the public key on the rrio for faster deploying (optional)

Building

• Run make && make deploy
• Run ssh admin@rrio-ip.local '/home/lvuser/FRCUserProgram' to execute the program

Usage

Left Joystick (USB 0)

• X-Axis - Drive forwards and backwards
• Y-Axis - Strafes left and right
• Z-Axis - Turns left and right
• Throttle - Adjusts collector speed
• Button 1 - Collect totes
• Button 2 - Eject totes

Right Joystick (USB 1)

• Button 3 - Lowers bin elevator
• Button 4 - Lowers main elevator
• Button 5 - Raises bin elevator
• Button 6 - Raises main elevator
• Button 7 - Runs an elevator cycle
• Button 12 - Cancel raising and lowering for both elevators

Dashboard

Configuration

• CodeVersion - The current version of the code
• Auto Wait Time - The amount of time to wait for any autonomous to run (default: 2.0)
• Two totes - Collect a second tote if using Auto Sequence 4 or 5 (default: true)
• Three totes - Collect a third tote if using Auto Sequence 4 or 5 (default: false)
• Auto Zone Distance - Amount of time in seconds to drive to the auto zone (default: 2.1)
• Auto Tote Distance - Amount of time in seconds to drive to a second or third tote if using Auto Sequence 4, 5, or 7 (default: 0.5)
• Auto Bin Distance - Amount of time in seconds to drive to a bin if using Auto Sequence 6 or 7 (default: 0.5)
• TurnAmount - Amount of time in seconds to turn the robot 90 degrees
• Elevator Bottom - Status of the bottom elevator sensor
• Elevator Top - Status of the top elevator sensor
• Auto Sequence - The sequence of autonomous to run

Autonomous

1. Drive to auto zone, turn
2. Lower BinElevator, collect bin, turn, drive to AutoZone, turn
3. Raise BinElevator, turn, drive to AutoZone, turn
4. Collect 1, 2, or 3 totes, turn, drive to AutoZone, turn
5. Same as auto 4, but navigate around bins (not implemented)
6. Collect 1 bin then 1 tote (not implemented)
7. Collect 3 totes, collect bin, drive to AutoZone (not implemented)

Contributing

This project uses 1TBS (Astyle Google variant with -j) and the -xc -xn -xl -xG -j -s2 -C -S -K -N Astyle (2.04+) flags.