# ------------------------------------------------------------------------------------------------- # Copyright (c) 2010-2017 zsh-syntax-highlighting contributors # All rights reserved. # # Redistribution and use in source and binary forms, with or without modification, are permitted # provided that the following conditions are met: # # * Redistributions of source code must retain the above copyright notice, this list of conditions # and the following disclaimer. # * Redistributions in binary form must reproduce the above copyright notice, this list of # conditions and the following disclaimer in the documentation and/or other materials provided # with the distribution. # * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors # may be used to endorse or promote products derived from this software without specific prior # written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND # FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR # CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER # IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT # OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # ------------------------------------------------------------------------------------------------- # -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*- # vim: ft=zsh sw=2 ts=2 et # ------------------------------------------------------------------------------------------------- # Define default styles. : ${ZSH_HIGHLIGHT_STYLES[default]:=none} : ${ZSH_HIGHLIGHT_STYLES[unknown-token]:=fg=red,bold} : ${ZSH_HIGHLIGHT_STYLES[reserved-word]:=fg=yellow} : ${ZSH_HIGHLIGHT_STYLES[suffix-alias]:=fg=green,underline} : ${ZSH_HIGHLIGHT_STYLES[precommand]:=fg=green,underline} : ${ZSH_HIGHLIGHT_STYLES[commandseparator]:=none} : ${ZSH_HIGHLIGHT_STYLES[path]:=underline} : ${ZSH_HIGHLIGHT_STYLES[path_pathseparator]:=} : ${ZSH_HIGHLIGHT_STYLES[path_prefix_pathseparator]:=} : ${ZSH_HIGHLIGHT_STYLES[globbing]:=fg=blue} : ${ZSH_HIGHLIGHT_STYLES[history-expansion]:=fg=blue} : ${ZSH_HIGHLIGHT_STYLES[command-substitution]:=none} : ${ZSH_HIGHLIGHT_STYLES[command-substitution-delimiter]:=fg=magenta} : ${ZSH_HIGHLIGHT_STYLES[process-substitution]:=none} : ${ZSH_HIGHLIGHT_STYLES[process-substitution-delimiter]:=fg=magenta} : ${ZSH_HIGHLIGHT_STYLES[single-hyphen-option]:=none} : ${ZSH_HIGHLIGHT_STYLES[double-hyphen-option]:=none} : ${ZSH_HIGHLIGHT_STYLES[back-quoted-argument]:=none} : ${ZSH_HIGHLIGHT_STYLES[back-quoted-argument-delimiter]:=fg=magenta} : ${ZSH_HIGHLIGHT_STYLES[single-quoted-argument]:=fg=yellow} : ${ZSH_HIGHLIGHT_STYLES[double-quoted-argument]:=fg=yellow} : ${ZSH_HIGHLIGHT_STYLES[dollar-quoted-argument]:=fg=yellow} : ${ZSH_HIGHLIGHT_STYLES[rc-quote]:=fg=cyan} : ${ZSH_HIGHLIGHT_STYLES[dollar-double-quoted-argument]:=fg=cyan} : ${ZSH_HIGHLIGHT_STYLES[back-double-quoted-argument]:=fg=cyan} : ${ZSH_HIGHLIGHT_STYLES[back-dollar-quoted-argument]:=fg=cyan} : ${ZSH_HIGHLIGHT_STYLES[assign]:=none} : ${ZSH_HIGHLIGHT_STYLES[redirection]:=none} : ${ZSH_HIGHLIGHT_STYLES[comment]:=fg=black,bold} : ${ZSH_HIGHLIGHT_STYLES[arg0]:=fg=green} # Whether the highlighter should be called or not. _zsh_highlight_highlighter_main_predicate() { # may need to remove path_prefix highlighting when the line ends [[ $WIDGET == zle-line-finish ]] || _zsh_highlight_buffer_modified } # Helper to deal with tokens crossing line boundaries. _zsh_highlight_main_add_region_highlight() { integer start=$1 end=$2 shift 2 # The calculation was relative to $buf but region_highlight is relative to $BUFFER. (( start += buf_offset )) (( end += buf_offset )) list_highlights+=($start $end $1) } _zsh_highlight_main_add_many_region_highlights() { for 1 2 3; do _zsh_highlight_main_add_region_highlight $1 $2 $3 done } _zsh_highlight_main_calculate_fallback() { local -A fallback_of; fallback_of=( alias arg0 suffix-alias arg0 builtin arg0 function arg0 command arg0 precommand arg0 hashed-command arg0 arg0_\* arg0 path_prefix path # The path separator fallback won't ever be used, due to the optimisation # in _zsh_highlight_main_highlighter_highlight_path_separators(). path_pathseparator path path_prefix_pathseparator path_prefix single-quoted-argument{-unclosed,} double-quoted-argument{-unclosed,} dollar-quoted-argument{-unclosed,} back-quoted-argument{-unclosed,} command-substitution{-delimiter,} process-substitution{-delimiter,} back-quoted-argument{-delimiter,} ) local needle=$1 value reply=($1) while [[ -n ${value::=$fallback_of[(k)$needle]} ]]; do unset "fallback_of[$needle]" # paranoia against infinite loops reply+=($value) needle=$value done } # Get the type of a command. # # Uses the zsh/parameter module if available to avoid forks, and a # wrapper around 'type -w' as fallback. # # Takes a single argument. # # The result will be stored in REPLY. _zsh_highlight_main__type() { if (( $+_zsh_highlight_main__command_type_cache )); then REPLY=$_zsh_highlight_main__command_type_cache[(e)$1] if [[ -n "$REPLY" ]]; then return fi fi if (( $#options_to_set )); then setopt localoptions $options_to_set; fi unset REPLY if zmodload -e zsh/parameter; then if (( $+aliases[(e)$1] )); then REPLY=alias elif (( $+saliases[(e)${1##*.}] )); then REPLY='suffix alias' elif (( $reswords[(Ie)$1] )); then REPLY=reserved elif (( $+functions[(e)$1] )); then REPLY=function elif (( $+builtins[(e)$1] )); then REPLY=builtin elif (( $+commands[(e)$1] )); then REPLY=command # zsh 5.2 and older have a bug whereby running 'type -w ./sudo' implicitly # runs 'hash ./sudo=/usr/local/bin/./sudo' (assuming /usr/local/bin/sudo # exists and is in $PATH). Avoid triggering the bug, at the expense of # falling through to the $() below, incurring a fork. (Issue #354.) # # The first disjunct mimics the isrelative() C call from the zsh bug. elif { [[ $1 != */* ]] || is-at-least 5.3 } && ! builtin type -w -- $1 >/dev/null 2>&1; then REPLY=none fi fi if ! (( $+REPLY )); then # Note that 'type -w' will run 'rehash' implicitly. REPLY="${$(LC_ALL=C builtin type -w -- $1 2>/dev/null)##*: }" fi if (( $+_zsh_highlight_main__command_type_cache )); then _zsh_highlight_main__command_type_cache[(e)$1]=$REPLY fi } # Check whether the first argument is a redirection operator token. # Report result via the exit code. _zsh_highlight_main__is_redirection() { # A redirection operator token: # - starts with an optional single-digit number; # - then, has a '<' or '>' character; # - is not a process substitution [<(...) or >(...)]. # - is not a numeric glob <-> [[ $1 == (<0-9>|)(\<|\>)* ]] && [[ $1 != (\<|\>)$'\x28'* ]] && [[ $1 != *'<'*'-'*'>'* ]] } # Resolve alias. # # Takes a single argument. # # The result will be stored in REPLY. _zsh_highlight_main__resolve_alias() { if zmodload -e zsh/parameter; then REPLY=${aliases[$arg]} else REPLY="${"$(alias -- $arg)"#*=}" fi } # Check that the top of $braces_stack has the expected value. If it does, set # the style according to $2; otherwise, set style=unknown-token. # # $1: character expected to be at the top of $braces_stack # $2: optional assignment to style it if matches # return value is 0 if there is a match else 1 _zsh_highlight_main__stack_pop() { if [[ $braces_stack[1] == $1 ]]; then braces_stack=${braces_stack:1} if (( $+2 )); then style=$2 fi return 0 else style=unknown-token return 1 fi } # Main syntax highlighting function. _zsh_highlight_highlighter_main_paint() { setopt localoptions extendedglob # At the PS3 prompt and in vared, highlight nothing. # # (We can't check this in _zsh_highlight_highlighter_main_predicate because # if the predicate returns false, the previous value of region_highlight # would be reused.) if [[ $CONTEXT == (select|vared) ]]; then return fi typeset -a ZSH_HIGHLIGHT_TOKENS_COMMANDSEPARATOR typeset -a ZSH_HIGHLIGHT_TOKENS_PRECOMMANDS typeset -a ZSH_HIGHLIGHT_TOKENS_CONTROL_FLOW local -a options_to_set reply # used in callees local REPLY if [[ $zsyh_user_options[ignorebraces] == on || ${zsyh_user_options[ignoreclosebraces]:-off} == on ]]; then local right_brace_is_recognised_everywhere=false else local right_brace_is_recognised_everywhere=true fi if [[ $zsyh_user_options[pathdirs] == on ]]; then options_to_set+=( PATH_DIRS ) fi ZSH_HIGHLIGHT_TOKENS_COMMANDSEPARATOR=( '|' '||' ';' '&' '&&' '|&' '&!' '&|' # ### 'case' syntax, but followed by a pattern, not by a command # ';;' ';&' ';|' ) ZSH_HIGHLIGHT_TOKENS_PRECOMMANDS=( 'builtin' 'command' 'exec' 'nocorrect' 'noglob' 'pkexec' # immune to #121 because it's usually not passed --option flags ) # Tokens that, at (naively-determined) "command position", are followed by # a de jure command position. All of these are reserved words. ZSH_HIGHLIGHT_TOKENS_CONTROL_FLOW=( $'\x7b' # block $'\x28' # subshell '()' # anonymous function 'while' 'until' 'if' 'then' 'elif' 'else' 'do' 'time' 'coproc' '!' # reserved word; unrelated to $histchars[1] ) _zsh_highlight_main_highlighter_highlight_list -$#PREBUFFER '' 1 "$PREBUFFER$BUFFER" # end is a reserved word local start end_ style for start end_ style in $reply; do (( start >= end_ )) && { print -r -- >&2 "zsh-syntax-highlighting: BUG: _zsh_highlight_highlighter_main_paint: start($start) >= end($end_)"; return } (( end_ <= 0 )) && continue (( start < 0 )) && start=0 # having start<0 is normal with e.g. multiline strings _zsh_highlight_main_calculate_fallback $style _zsh_highlight_add_highlight $start $end_ $reply done } # $1 is the offset of $4 from the parent buffer. Added to the returned highlights. # $2 is the initial braces_stack (for a closing paren). # $3 is 1 if $4 contains the end of $BUFFER, else 0. # $4 is the buffer to highlight. # Returns: # $REPLY: $buf[REPLY] is the last character parsed. # $reply is an array of region_highlight additions. # exit code is 0 if the braces_stack is empty, 1 otherwise. _zsh_highlight_main_highlighter_highlight_list() { integer start_pos=0 end_pos buf_offset=$1 has_end=$3 local buf=$4 highlight_glob=true arg arg_raw style local in_array_assignment=false # true between 'a=(' and the matching ')' integer len=$#buf local -a match mbegin mend list_highlights list_highlights=() # "R" for round # "Q" for square # "Y" for curly # "S" for $( ) # "D" for do/done # "$" for 'end' (matches 'foreach' always; also used with cshjunkiequotes in repeat/while) # "?" for 'if'/'fi'; also checked by 'elif'/'else' # ":" for 'then' local braces_stack=$2 # State machine # # The states are: # - :start: Command word # - :sudo_opt: A leading-dash option to sudo (such as "-u" or "-i") # - :sudo_arg: The argument to a sudo leading-dash option that takes one, # when given as a separate word; i.e., "foo" in "-u foo" (two # words) but not in "-ufoo" (one word). # - :regular: "Not a command word", and command delimiters are permitted. # Mainly used to detect premature termination of commands. # - :always: The word 'always' in the «{ foo } always { bar }» syntax. # # When the kind of a word is not yet known, $this_word / $next_word may contain # multiple states. For example, after "sudo -i", the next word may be either # another --flag or a command name, hence the state would include both :start: # and :sudo_opt:. # # The tokens are always added with both leading and trailing colons to serve as # word delimiters (an improvised array); [[ $x == *:foo:* ]] and x=${x//:foo:/} # will DTRT regardless of how many elements or repetitions $x has.. # # Handling of redirections: upon seeing a redirection token, we must stall # the current state --- that is, the value of $this_word --- for two iterations # (one for the redirection operator, one for the word following it representing # the redirection target). Therefore, we set $in_redirection to 2 upon seeing a # redirection operator, decrement it each iteration, and stall the current state # when it is non-zero. Thus, upon reaching the next word (the one that follows # the redirection operator and target), $this_word will still contain values # appropriate for the word immediately following the word that preceded the # redirection operator. # # The "the previous word was a redirection operator" state is not communicated # to the next iteration via $next_word/$this_word as usual, but via # $in_redirection. The value of $next_word from the iteration that processed # the operator is discarded. # local this_word=':start:' next_word integer in_redirection # Processing buffer local proc_buf="$buf" local -a args if [[ $zsyh_user_options[interactivecomments] == on ]]; then args=(${(zZ+c+)buf}) else args=(${(z)buf}) fi for arg in $args; do # Save an unmunged copy of the current word. arg_raw="$arg" # Initialize $next_word. if (( in_redirection )); then (( --in_redirection )) fi if (( in_redirection == 0 )); then # Initialize $next_word to its default value. next_word=':regular:' else # Stall $next_word. fi # Initialize per-"simple command" [zshmisc(1)] variables: # # $already_added (see next paragraph) # $style how to highlight $arg # $in_array_assignment boolean flag for "between '(' and ')' of array assignment" # $highlight_glob boolean flag for "'noglob' is in effect" # # $already_added is set to 1 to disable adding an entry to region_highlight # for this iteration. Currently, that is done for "" and $'' strings, # which add the entry early so escape sequences within the string override # the string's color. integer already_added=0 style=unknown-token if [[ $this_word == *':start:'* ]]; then in_array_assignment=false if [[ $arg == 'noglob' ]]; then highlight_glob=false fi fi # Compute the new $start_pos and $end_pos, skipping over whitespace in $buf. if [[ $arg == ';' ]] ; then # We're looking for either a semicolon or a newline, whichever comes # first. Both of these are rendered as a ";" (SEPER) by the ${(z)..} # flag. # # We can't use the (Z+n+) flag because that elides the end-of-command # token altogether, so 'echo foo\necho bar' (two commands) becomes # indistinguishable from 'echo foo echo bar' (one command with three # words for arguments). local needle=$'[;\n]' integer offset=$(( ${proc_buf[(i)$needle]} - 1 )) (( start_pos += offset )) (( end_pos = start_pos + $#arg )) else # The line was: # # integer offset=$(((len-start_pos)-${#${proc_buf##([[:space:]]|\\[[:space:]])#}})) # # - len-start_pos is length of current proc_buf; basically: initial length minus where # we are, and proc_buf is chopped to the "where we are" (compare the "previous value # of start_pos" below, and the len-(start_pos-offset) = len-start_pos+offset) # - what's after main minus sign is: length of proc_buf without spaces at the beginning # - so what the line actually did, was computing length of the spaces! # - this can be done via (#b) flag, like below if [[ "$proc_buf" = (#b)(#s)(([[:space:]]|\\$'\n')##)* ]]; then # The first, outer parenthesis integer offset="${#match[1]}" else integer offset=0 fi ((start_pos+=offset)) ((end_pos=$start_pos+${#arg})) fi # Compute the new $proc_buf. We advance it # (chop off characters from the beginning) # beyond what end_pos points to, by skipping # as many characters as end_pos was advanced. # # end_pos was advanced by $offset (via start_pos) # and by $#arg. Note the `start_pos=$end_pos` # below. # # As for the [,len]. We could use [,len-start_pos+offset] # here, but to make it easier on eyes, we use len and # rely on the fact that Zsh simply handles that. The # length of proc_buf is len-start_pos+offset because # we're chopping it to match current start_pos, so its # length matches the previous value of start_pos. # # Why [,-1] is slower than [,length] isn't clear. proc_buf="${proc_buf[offset + $#arg + 1,len]}" # Handle the INTERACTIVE_COMMENTS option. # # We use the (Z+c+) flag so the entire comment is presented as one token in $arg. if [[ $zsyh_user_options[interactivecomments] == on && $arg[1] == $histchars[3] ]]; then if [[ $this_word == *(':regular:'|':start:')* ]]; then style=comment else style=unknown-token # prematurely terminated fi _zsh_highlight_main_add_region_highlight $start_pos $end_pos $style already_added=1 start_pos=$end_pos continue fi # Analyse the current word. if _zsh_highlight_main__is_redirection $arg ; then if (( in_redirection )); then _zsh_highlight_main_add_region_highlight $start_pos $end_pos unknown-token already_added=1 else in_redirection=2 fi fi # Expand aliases. # TODO: this should be done iteratively, e.g., 'alias x=y y=z z=w\n x' # And then the entire 'alias' branch of the 'case' statement should # be done here. () { # TODO: path expansion should happen _after_ alias expansion _zsh_highlight_main_highlighter_expand_path $arg local expanded_arg="$REPLY" _zsh_highlight_main__type ${expanded_arg} } local res="$REPLY" if [[ $res == "alias" ]]; then _zsh_highlight_main__resolve_alias $arg () { # Use a temporary array to ensure the subscript is interpreted as # an array subscript, not as a scalar subscript local -a reply # TODO: the ${interactive_comments+set} path needs to skip comments; see test-data/alias-comment1.zsh reply=( ${interactive_comments-${(z)REPLY}} ${interactive_comments+${(zZ+c+)REPLY}} ) arg=$reply[1] } fi # Expand parameters. # # ### For now, expand just '$foo', like that, without braces or anything. () { # That's not entirely correct --- if the parameter's value happens to be a reserved # word, the parameter expansion will be highlighted as a reserved word --- but that # incorrectness is outweighed by the usability improvement of permitting the use of # parameters that refer to commands, functions, and builtins. local -a match mbegin mend local MATCH; integer MBEGIN MEND local parameter_name if [[ $arg[1] == '$' ]] && [[ ${arg[2]} == '{' ]] && [[ ${arg[-1]} == '}' ]]; then parameter_name=${${arg:2}%?} elif [[ $arg[1] == '$' ]]; then parameter_name=${arg:1} fi if [[ $res == none ]] && (( ${+parameters} )) && [[ ${parameter_name} =~ ^([A-Za-z_][A-Za-z0-9_]*|[0-9]+)$ ]] && (( ${+parameters[(e)${MATCH}]} )) && [[ ${parameters[(e)$MATCH]} != *special* ]] then arg=${(P)MATCH} _zsh_highlight_main__type "$arg" res=$REPLY fi } # Special-case the first word after 'sudo'. if (( ! in_redirection )); then if [[ $this_word == *':sudo_opt:'* ]] && [[ $arg != -* ]]; then this_word=${this_word//:sudo_opt:/} fi fi # Parse the sudo command line if (( ! in_redirection )); then if [[ $this_word == *':sudo_opt:'* ]]; then case "$arg" in # Flag that requires an argument '-'[Cgprtu]) this_word=${this_word//:start:/}; next_word=':sudo_arg:';; # This prevents misbehavior with sudo -u -otherargument '-'*) this_word=${this_word//:start:/}; next_word+=':start:'; next_word+=':sudo_opt:';; *) ;; esac elif [[ $this_word == *':sudo_arg:'* ]]; then next_word+=':sudo_opt:' next_word+=':start:' fi fi # The Great Fork: is this a command word? Is this a non-command word? if [[ $this_word == *':always:'* && $arg == 'always' ]]; then # try-always construct style=reserved-word # de facto a reserved word, although not de jure next_word=':start:' elif [[ $this_word == *':start:'* ]] && (( in_redirection == 0 )); then # $arg is the command word if [[ -n ${(M)ZSH_HIGHLIGHT_TOKENS_PRECOMMANDS:#"$arg"} ]]; then style=precommand elif [[ "$arg" = "sudo" ]] && { _zsh_highlight_main__type sudo; [[ -n $REPLY && $REPLY != "none" ]] }; then style=precommand next_word=${next_word//:regular:/} next_word+=':sudo_opt:' next_word+=':start:' else case $res in reserved) # reserved word style=reserved-word # # Match braces. case $arg in ($'\x7b') braces_stack='Y'"$braces_stack" ;; ($'\x7d') # We're at command word, so no need to check $right_brace_is_recognised_everywhere _zsh_highlight_main__stack_pop 'Y' reserved-word if [[ $style == reserved-word ]]; then next_word+=':always:' fi ;; ('do') braces_stack='D'"$braces_stack" ;; ('done') _zsh_highlight_main__stack_pop 'D' reserved-word ;; ('if') braces_stack=':?'"$braces_stack" ;; ('then') _zsh_highlight_main__stack_pop ':' reserved-word ;; ('elif') if [[ ${braces_stack[1]} == '?' ]]; then braces_stack=':'"$braces_stack" else style=unknown-token fi ;; ('else') if [[ ${braces_stack[1]} == '?' ]]; then : else style=unknown-token fi ;; ('fi') _zsh_highlight_main__stack_pop '?' ;; ('foreach') braces_stack='$'"$braces_stack" ;; ('end') _zsh_highlight_main__stack_pop '$' reserved-word ;; esac ;; 'suffix alias') style=suffix-alias;; alias) () { # Make sure to use $arg_raw here, rather than $arg. integer insane_alias case $arg_raw in # Issue #263: aliases with '=' on their LHS. # # There are three cases: # # - Unsupported, breaks 'alias -L' output, but invokable: ('='*) :;; # - Unsupported, not invokable: (*'='*) insane_alias=1;; # - The common case: (*) :;; esac if (( insane_alias )); then style=unknown-token # Calling 'type' again; since __type memoizes the answer, this call is just a hash lookup. elif _zsh_highlight_main__type "$arg"; [[ $REPLY == 'none' ]]; then style=unknown-token else # The common case. style=alias [[ -n ${(M)ZSH_HIGHLIGHT_TOKENS_PRECOMMANDS:#"$arg"} && -z ${(M)ZSH_HIGHLIGHT_TOKENS_PRECOMMANDS:#"$arg_raw"} ]] && ZSH_HIGHLIGHT_TOKENS_PRECOMMANDS+=($arg_raw) fi } ;; builtin) style=builtin;; function) style=function;; command) style=command;; hashed) style=hashed-command;; none) if _zsh_highlight_main_highlighter_check_assign; then style=assign _zsh_highlight_main_add_region_highlight $start_pos $end_pos $style already_added=1 local i=$(( arg[(i)=] + 1 )) if [[ $arg[i] == '(' ]]; then in_array_assignment=true else # assignment to a scalar parameter. # (For array assignments, the command doesn't start until the ")" token.) next_word+=':start:' if (( start_pos + i <= end_pos )); then () { local highlight_glob=false [[ $zsyh_user_options[globassign] == on ]] && highlight_glob=true _zsh_highlight_main_highlighter_highlight_argument $i } fi fi elif [[ $arg[0,1] = $histchars[0,1] ]] && (( $#arg[0,2] == 2 )); then style=history-expansion elif [[ $arg[0,1] == $histchars[2,2] ]]; then style=history-expansion elif [[ -n ${(M)ZSH_HIGHLIGHT_TOKENS_COMMANDSEPARATOR:#"$arg"} ]]; then if [[ $this_word == *':regular:'* ]]; then # This highlights empty commands (semicolon follows nothing) as an error. # Zsh accepts them, though. style=commandseparator else style=unknown-token fi elif (( in_redirection == 2 )); then style=redirection elif [[ $arg[1,2] == '((' ]]; then # Arithmetic evaluation. # # Note: prior to zsh-5.1.1-52-g4bed2cf (workers/36669), the ${(z)...} # splitter would only output the '((' token if the matching '))' had # been typed. Therefore, under those versions of zsh, BUFFER="(( 42" # would be highlighted as an error until the matching "))" are typed. # # We highlight just the opening parentheses, as a reserved word; this # is how [[ ... ]] is highlighted, too. style=reserved-word _zsh_highlight_main_add_region_highlight $start_pos $((start_pos + 2)) $style already_added=1 if [[ $arg[-2,-1] == '))' ]]; then _zsh_highlight_main_add_region_highlight $((end_pos - 2)) $end_pos $style already_added=1 fi elif [[ $arg == '()' ]]; then # anonymous function style=reserved-word elif [[ $arg == $'\x28' ]]; then # subshell style=reserved-word braces_stack='R'"$braces_stack" elif [[ $arg == $'\x29' ]]; then # end of subshell or command substitution if _zsh_highlight_main__stack_pop 'S'; then REPLY=$start_pos reply=($list_highlights) return 0 fi _zsh_highlight_main__stack_pop 'R' reserved-word else if _zsh_highlight_main_highlighter_check_path $arg; then style=$REPLY else style=unknown-token fi fi ;; *) _zsh_highlight_main_add_region_highlight $start_pos $end_pos arg0_$res already_added=1 ;; esac fi fi if (( ! already_added )) && [[ $style == unknown-token ]] && # not handled by the 'command word' codepath { (( in_redirection )) || [[ $this_word == *':regular:'* ]] || [[ $this_word == *':sudo_opt:'* ]] || [[ $this_word == *':sudo_arg:'* ]] } then # $arg is a non-command word case $arg in $'\x29') # subshell or end of array assignment if $in_array_assignment; then style=assign in_array_assignment=false next_word+=':start:' else if _zsh_highlight_main__stack_pop 'S'; then REPLY=$start_pos reply=($list_highlights) return 0 fi _zsh_highlight_main__stack_pop 'R' reserved-word fi;; $'\x28\x29') # possibly a function definition if [[ $zsyh_user_options[multifuncdef] == on ]] || false # TODO: or if the previous word was a command word then next_word+=':start:' fi style=reserved-word ;; *) if false; then elif [[ $arg = $'\x7d' ]] && $right_brace_is_recognised_everywhere; then # Parsing rule: } # # Additionally, `tt(})' is recognized in any position if neither the # tt(IGNORE_BRACES) option nor the tt(IGNORE_CLOSE_BRACES) option is set. _zsh_highlight_main__stack_pop 'Y' reserved-word if [[ $style == reserved-word ]]; then next_word+=':always:' fi elif [[ $arg[0,1] = $histchars[0,1] ]] && (( $#arg[0,2] == 2 )); then style=history-expansion elif [[ -n ${(M)ZSH_HIGHLIGHT_TOKENS_COMMANDSEPARATOR:#"$arg"} ]]; then if [[ $this_word == *':regular:'* ]]; then style=commandseparator else style=unknown-token fi elif (( in_redirection == 2 )); then style=redirection else _zsh_highlight_main_highlighter_highlight_argument 1 already_added=1 fi ;; esac fi if ! (( already_added )); then _zsh_highlight_main_add_region_highlight $start_pos $end_pos $style fi if [[ -n ${(M)ZSH_HIGHLIGHT_TOKENS_COMMANDSEPARATOR:#"$arg"} ]]; then if [[ $arg == ';' ]] && $in_array_assignment; then # literal newline inside an array assignment next_word=':regular:' else next_word=':start:' highlight_glob=true fi elif [[ -n ${(M)ZSH_HIGHLIGHT_TOKENS_CONTROL_FLOW:#"$arg"} && $this_word == *':start:'* ]] || [[ -n ${(M)ZSH_HIGHLIGHT_TOKENS_PRECOMMANDS:#"$arg"} && $this_word == *':start:'* ]]; then next_word=':start:' elif [[ $arg == "repeat" && $this_word == *':start:'* ]]; then # skip the repeat-count word in_redirection=2 # The redirection mechanism assumes $this_word describes the word # following the redirection. Make it so. # # That word can be a command word with shortloops (`repeat 2 ls`) # or a command separator (`repeat 2; ls` or `repeat 2; do ls; done`). # # The repeat-count word will be handled like a redirection target. this_word=':start::regular:' fi start_pos=$end_pos if (( in_redirection == 0 )); then # This is the default/common codepath. this_word=$next_word else # Stall $this_word. fi done REPLY=$(( end_pos - 1 )) reply=($list_highlights) return $(( $#braces_stack > 0 )) } # Check if $arg is variable assignment _zsh_highlight_main_highlighter_check_assign() { setopt localoptions extended_glob [[ $arg == [[:alpha:]_][[:alnum:]_]#(|\[*\])(|[+])=* ]] || [[ $arg == [0-9]##(|[+])=* ]] } _zsh_highlight_main_highlighter_highlight_path_separators() { local pos style_pathsep style_pathsep=$1_pathseparator reply=() [[ -z "$ZSH_HIGHLIGHT_STYLES[$style_pathsep]" || "$ZSH_HIGHLIGHT_STYLES[$1]" == "$ZSH_HIGHLIGHT_STYLES[$style_pathsep]" ]] && return 0 for (( pos = start_pos; $pos <= end_pos; pos++ )) ; do if [[ $BUFFER[pos] == / ]]; then reply+=($((pos - 1)) $pos $style_pathsep) fi done } # Check if $1 is a path. # If yes, return 0 and in $REPLY the style to use. # Else, return non-zero (and the contents of $REPLY is undefined). _zsh_highlight_main_highlighter_check_path() { _zsh_highlight_main_highlighter_expand_path $1 local expanded_path="$REPLY" tmp_path REPLY=path [[ -z $expanded_path ]] && return 1 # Check if this is a blacklisted path if [[ $expanded_path[1] == / ]]; then tmp_path=$expanded_path else tmp_path=$PWD/$expanded_path fi tmp_path=$tmp_path:a while [[ $tmp_path != / ]]; do [[ -n ${(M)X_ZSH_HIGHLIGHT_DIRS_BLACKLIST:#$tmp_path} ]] && return 1 tmp_path=$tmp_path:h done [[ -L $expanded_path ]] && return 0 [[ -e $expanded_path ]] && return 0 # Search the path in CDPATH local cdpath_dir for cdpath_dir in $cdpath ; do [[ -e "$cdpath_dir/$expanded_path" ]] && return 0 done # If dirname($1) doesn't exist, neither does $1. [[ ! -d ${expanded_path:h} ]] && return 1 # If this word ends the buffer, check if it's the prefix of a valid path. if (( has_end && (len == end_pos) )) && [[ $WIDGET != zle-line-finish ]]; then local -a tmp tmp=( ${expanded_path}*(N) ) (( $#tmp > 0 )) && REPLY=path_prefix && return 0 fi # It's not a path. return 1 } # Highlight an argument and possibly special chars in quotes starting at $1 in $arg # This command will at least highlight $1 to end_pos with the default style _zsh_highlight_main_highlighter_highlight_argument() { local base_style=default i=$1 path_eligible=1 ret start style local -a highlights local -a match mbegin mend local MATCH; integer MBEGIN MEND case "$arg[i]" in '-') if [[ $arg[i+1] == - ]]; then base_style=double-hyphen-option else base_style=single-hyphen-option fi path_eligible=0 ;; '=') if [[ $arg[i+1] == $'\x28' ]]; then (( i += 2 )) _zsh_highlight_main_highlighter_highlight_list $(( start_pos + i - 1 )) S $has_end $arg[i,end_pos] ret=$? (( i += REPLY )) highlights+=( $(( start_pos + $1 - 1 )) $(( start_pos + i )) process-substitution $(( start_pos + $1 - 1 )) $(( start_pos + $1 + 1 )) process-substitution-delimiter $reply ) if (( ret == 0 )); then highlights+=($(( start_pos + i - 1 )) $(( start_pos + i )) process-substitution-delimiter) fi fi esac for (( ; i <= end_pos - start_pos ; i += 1 )); do case "$arg[$i]" in "\\") (( i += 1 )); continue;; "'") _zsh_highlight_main_highlighter_highlight_single_quote $i (( i = REPLY )) highlights+=($reply) ;; '"') _zsh_highlight_main_highlighter_highlight_double_quote $i (( i = REPLY )) highlights+=($reply) ;; '`') _zsh_highlight_main_highlighter_highlight_backtick $i (( i = REPLY )) highlights+=($reply) ;; '$') path_eligible=0 if [[ $arg[i+1] == "'" ]]; then path_eligible=1 _zsh_highlight_main_highlighter_highlight_dollar_quote $i (( i = REPLY )) highlights+=($reply) continue elif [[ $arg[i+1] == $'\x28' ]]; then start=$i (( i += 2 )) _zsh_highlight_main_highlighter_highlight_list $(( start_pos + i - 1 )) S $has_end $arg[i,end_pos] ret=$? (( i += REPLY )) highlights+=( $(( start_pos + start - 1)) $(( start_pos + i )) command-substitution $(( start_pos + start - 1)) $(( start_pos + start + 1)) command-substitution-delimiter $reply ) if (( ret == 0 )); then highlights+=($(( start_pos + i - 1)) $(( start_pos + i )) command-substitution-delimiter) fi continue fi while [[ $arg[i+1] == [\^=~#+] ]]; do (( i += 1 )) done if [[ $arg[i+1] == [*@#?$!-] ]]; then (( i += 1 )) fi;; [\<\>]) if [[ $arg[i+1] == $'\x28' ]]; then # \x28 = open paren start=$i (( i += 2 )) _zsh_highlight_main_highlighter_highlight_list $(( start_pos + i - 1 )) S $has_end $arg[i,end_pos] ret=$? (( i += REPLY )) highlights+=( $(( start_pos + start - 1)) $(( start_pos + i )) process-substitution $(( start_pos + start - 1)) $(( start_pos + start + 1 )) process-substitution-delimiter $reply ) if (( ret == 0 )); then highlights+=($(( start_pos + i - 1)) $(( start_pos + i )) process-substitution-delimiter) fi continue fi ;| *) if $highlight_glob && [[ ${arg[$i]} =~ ^[*?] || ${arg:$i-1} =~ ^\<[0-9]*-[0-9]*\> ]]; then highlights+=($(( start_pos + i - 1 )) $(( start_pos + i + $#MATCH - 1)) globbing) (( i += $#MATCH - 1 )) path_eligible=0 else continue fi ;; esac done if (( path_eligible )) && _zsh_highlight_main_highlighter_check_path $arg[$1,end_pos]; then base_style=$REPLY _zsh_highlight_main_highlighter_highlight_path_separators $base_style highlights+=($reply) fi highlights=($(( start_pos + $1 - 1 )) $end_pos $base_style $highlights) _zsh_highlight_main_add_many_region_highlights $highlights } # Quote Helper Functions # # $arg is expected to be set to the current argument # $start_pos is expected to be set to the start of $arg in $BUFFER # $1 is the index in $arg which starts the quote # $REPLY is returned as the end of quote index in $arg # $reply is returned as an array of region_highlight additions # Highlight single-quoted strings _zsh_highlight_main_highlighter_highlight_single_quote() { local arg1=$1 i q=\' style i=$arg[(ib:arg1+1:)$q] reply=() if [[ $zsyh_user_options[rcquotes] == on ]]; then while [[ $arg[i+1] == "'" ]]; do reply+=($(( start_pos + i - 1 )) $(( start_pos + i + 1 )) rc-quote) (( i++ )) i=$arg[(ib:i+1:)$q] done fi if [[ $arg[i] == "'" ]]; then style=single-quoted-argument else # If unclosed, i points past the end (( i-- )) style=single-quoted-argument-unclosed fi reply=($(( start_pos + arg1 - 1 )) $(( start_pos + i )) $style $reply) REPLY=$i } # Highlight special chars inside double-quoted strings _zsh_highlight_main_highlighter_highlight_double_quote() { local -a match mbegin mend saved_reply local MATCH; integer MBEGIN MEND local i j k ret style reply=() for (( i = $1 + 1 ; i <= end_pos - start_pos ; i += 1 )) ; do (( j = i + start_pos - 1 )) (( k = j + 1 )) case "$arg[$i]" in '"') break;; '`') saved_reply=($reply) _zsh_highlight_main_highlighter_highlight_backtick $i (( i = REPLY )) reply=($saved_reply $reply) continue ;; '$' ) style=dollar-double-quoted-argument # Look for an alphanumeric parameter name. if [[ ${arg:$i} =~ ^([A-Za-z_][A-Za-z0-9_]*|[0-9]+) ]] ; then (( k += $#MATCH )) # highlight the parameter name (( i += $#MATCH )) # skip past it elif [[ ${arg:$i} =~ ^[{]([A-Za-z_][A-Za-z0-9_]*|[0-9]+)[}] ]] ; then (( k += $#MATCH )) # highlight the parameter name and braces (( i += $#MATCH )) # skip past it elif [[ $arg[i+1] == '$' ]]; then # $$ - pid (( k += 1 )) # highlight both dollar signs (( i += 1 )) # don't consider the second one as introducing another parameter expansion elif [[ $arg[i+1] == [-#*@?] ]]; then # $#, $*, $@, $?, $- - like $$ above (( k += 1 )) # highlight both dollar signs (( i += 1 )) # don't consider the second one as introducing another parameter expansion elif [[ $arg[i+1] == $'\x28' ]]; then (( i += 2 )) saved_reply=($reply) _zsh_highlight_main_highlighter_highlight_list $(( start_pos + i - 1 )) S $has_end $arg[i,end_pos] ret=$? (( i += REPLY )) reply=( $saved_reply $j $(( start_pos + i )) command-substitution $j $(( j + 2 )) command-substitution-delimiter $reply ) if (( ret == 0 )); then reply+=($(( start_pos + i - 1 )) $(( start_pos + i )) command-substitution-delimiter) fi continue else continue fi ;; "\\") style=back-double-quoted-argument if [[ \\\`\"\$${histchars[1]} == *$arg[$i+1]* ]]; then (( k += 1 )) # Color following char too. (( i += 1 )) # Skip parsing the escaped char. else continue fi ;; ($histchars[1]) # ! - may be a history expansion if [[ $arg[i+1] != ('='|$'\x28'|$'\x7b'|[[:blank:]]) ]]; then style=history-expansion else continue fi ;; *) continue ;; esac reply+=($j $k $style) done if [[ $arg[i] == '"' ]]; then style=double-quoted-argument else # If unclosed, i points past the end (( i-- )) style=double-quoted-argument-unclosed fi reply=($(( start_pos + $1 - 1)) $(( start_pos + i )) $style $reply) REPLY=$i } # Highlight special chars inside dollar-quoted strings _zsh_highlight_main_highlighter_highlight_dollar_quote() { local -a match mbegin mend local MATCH; integer MBEGIN MEND local i j k style local AA integer c reply=() for (( i = $1 + 2 ; i <= end_pos - start_pos ; i += 1 )) ; do (( j = i + start_pos - 1 )) (( k = j + 1 )) case "$arg[$i]" in "'") break;; "\\") style=back-dollar-quoted-argument for (( c = i + 1 ; c <= end_pos - start_pos ; c += 1 )); do [[ "$arg[$c]" != ([0-9xXuUa-fA-F]) ]] && break done AA=$arg[$i+1,$c-1] # Matching for HEX and OCT values like \0xA6, \xA6 or \012 if [[ "$AA" =~ "^(x|X)[0-9a-fA-F]{1,2}" || "$AA" =~ "^[0-7]{1,3}" || "$AA" =~ "^u[0-9a-fA-F]{1,4}" || "$AA" =~ "^U[0-9a-fA-F]{1,8}" ]]; then (( k += $#MATCH )) (( i += $#MATCH )) else if (( $#arg > $i+1 )) && [[ $arg[$i+1] == [xXuU] ]]; then # \x not followed by hex digits is probably an error style=unknown-token fi (( k += 1 )) # Color following char too. (( i += 1 )) # Skip parsing the escaped char. fi ;; *) continue ;; esac reply+=($j $k $style) done if [[ $arg[i] == "'" ]]; then style=dollar-quoted-argument else # If unclosed, i points past the end (( i-- )) style=dollar-quoted-argument-unclosed fi reply=($(( start_pos + $1 - 1 )) $(( start_pos + i )) $style $reply) REPLY=$i } # Highlight backtick substitutions _zsh_highlight_main_highlighter_highlight_backtick() { # buf is the contents of the backticks with a layer of backslashes removed. # last is the index of arg for the start of the string to be copied into buf. # It is either one past the beginning backtick or one past the last backslash. # offset is a count of consumed \ (the delta between buf and arg). # offsets is an array indexed by buf offset of when the delta between buf and arg changes. # It is sparse, so search backwards to the last value local buf highlight style=back-quoted-argument-unclosed style_end local -i arg1=$1 end_ i=$1 last offset=0 start subshell_has_end=0 local -a highlight_zone highlights offsets reply=() last=$(( arg1 + 1 )) # Remove one layer of backslashes and find the end while i=$arg[(ib:i+1:)[\\\\\`]]; do # find the next \ or ` if (( i > end_pos - start_pos )); then buf=$buf$arg[last,i] offsets[i-arg1-offset]='' # So we never index past the end (( i-- )) subshell_has_end=$(( has_end && (start_pos + i == len) )) break fi if [[ $arg[i] == '\' ]]; then (( i++ )) # POSIX XCU 2.6.3 if [[ $arg[i] == ('$'|'`'|'\') ]]; then buf=$buf$arg[last,i-2] (( offset++ )) # offsets is relative to buf, so adjust by -arg1 offsets[i-arg1-offset]=$offset else buf=$buf$arg[last,i-1] fi else # it's an unquoted ` and this is the end style=back-quoted-argument style_end=back-quoted-argument-delimiter buf=$buf$arg[last,i-1] offsets[i-arg1-offset]='' # So we never index past the end break fi last=$i done _zsh_highlight_main_highlighter_highlight_list 0 '' $subshell_has_end $buf # Munge the reply to account for removed backslashes for start end_ highlight in $reply; do start=$(( start_pos + arg1 + start + offsets[(Rb:start:)?*] )) end_=$(( start_pos + arg1 + end_ + offsets[(Rb:end_:)?*] )) highlights+=($start $end_ $highlight) if [[ $highlight == back-quoted-argument-unclosed && $style == back-quoted-argument ]]; then # An inner backtick command substitution is unclosed, but this level is closed style_end=unknown-token fi done reply=( $(( start_pos + arg1 - 1 )) $(( start_pos + i )) $style $(( start_pos + arg1 - 1 )) $(( start_pos + arg1 )) back-quoted-argument-delimiter $highlights ) if (( $#style_end )); then reply+=($(( start_pos + i - 1)) $(( start_pos + i )) $style_end) fi REPLY=$i } # Called with a single positional argument. # Perform filename expansion (tilde expansion) on the argument and set $REPLY to the expanded value. # # Does not perform filename generation (globbing). _zsh_highlight_main_highlighter_expand_path() { (( $# == 1 )) || print -r -- >&2 "zsh-syntax-highlighting: BUG: _zsh_highlight_main_highlighter_expand_path: called without argument" # The $~1 syntax normally performs filename generation, but not when it's on the right-hand side of ${x:=y}. setopt localoptions nonomatch unset REPLY : ${REPLY:=${(Q)${~1}}} } # ------------------------------------------------------------------------------------------------- # Main highlighter initialization # ------------------------------------------------------------------------------------------------- _zsh_highlight_main__precmd_hook() { _zsh_highlight_main__command_type_cache=() } autoload -Uz add-zsh-hook if add-zsh-hook precmd _zsh_highlight_main__precmd_hook 2>/dev/null; then # Initialize command type cache typeset -gA _zsh_highlight_main__command_type_cache else print -r -- >&2 'zsh-syntax-highlighting: Failed to load add-zsh-hook. Some speed optimizations will not be used.' # Make sure the cache is unset unset _zsh_highlight_main__command_type_cache fi typeset -ga X_ZSH_HIGHLIGHT_DIRS_BLACKLIST