Use full liquidprompt config file

shells/liquidpromptrc

@@ -1,17 +1,167 @@
-LP_ENABLE_GIT=0
-LP_ENABLE_TIME=0
-LP_ENABLE_OHMYGIT=1
+
+####################################
+# LIQUID PROMPT CONFIGURATION FILE #
+####################################
+
+# If you want to use different themes and features,
+# you can load the corresponding files here:
+#source ~/.config/liquidprompt/nojhan.theme
+#LP_PS1_FILE=~/.config/liquidprompt/nojhan.ps1
+
+#############
+# BEHAVIOUR #
+#############
+
+# Maximal value under which the battery level is displayed
+# Recommended value is 75
+LP_BATTERY_THRESHOLD=75
+
+# Minimal value after which the load average is displayed
+# Recommended value is 60
+LP_LOAD_THRESHOLD=60
+
+# Minimal value after which the temperature is displayed (in degrees Celsius)
+# Recommended value is 60
+LP_TEMP_THRESHOLD=60
+
+# The maximum percentage of the screen width used to display the path
+# Recommended value is 35
+LP_PATH_LENGTH=35
+
+# How many directories to keep at the beginning of a shortened path
+# Recommended value is 2
+LP_PATH_KEEP=2
+
+# Do you want to display the hostname, even if not connected through network?
+# Defaults to 0 (do not display hostname when locally connected)
+# set to 1 if you want to always see the hostname
+# set to -1 if you want to never see the hostname
 LP_HOSTNAME_ALWAYS=0
-LP_ENABLE_BATT=1
-LP_ENABLE_SSH_COLORS=1
+
+# Use the FQDN instead of the short hostname if the hostname is displayed
+LP_ENABLE_FQDN=0
+
+# Do you want to display the user, even if the user is the same as the one logged in?
+# Defaults to 1 (always display the user)
+# set to 0 if you want to hide the logged user (it will always display different users)
 LP_USER_ALWAYS=0
-LP_ENABLE_OHMYGIT=1
-LP_ENABLE_JOBS=1
+
+# Do you want to display the percentages of load/batteries along with their
+# corresponding marks? Set to 0 to only print the colored marks.
+# Defaults to 1 (display percentages)
+LP_PERCENTS_ALWAYS=1
+
+# Do you want to use the permissions feature?
+# Recommended value is 1
+LP_ENABLE_PERM=1
+
+# Do you want to use the shorten path feature?
+# Recommended value is 1
 LP_ENABLE_SHORTEN_PATH=0
+
+# Do you want to use the proxy detection feature?
+# Recommended value is 1
+LP_ENABLE_PROXY=1
+
+# Do you want to use the jobs feature?
+# Recommended value is 1
+LP_ENABLE_JOBS=1
+
+# Do you want to use the load feature?
+# Recommended value is 1
+LP_ENABLE_LOAD=1
+
+# Do you want to use the battery feature?
+# Recommended value is 1
+LP_ENABLE_BATT=1
+
+# Do you want to use the 'sudo credentials' feature?
+# Be warned that this may pollute the syslog if you don't have sudo
+# credentials, and the sysadmin will hate you.
+LP_ENABLE_SUDO=0
+
+# Do you want to use VCS features with the root account?
+# Recommended value is 0
+LP_ENABLE_VCS_ROOT=0
+
+# Do you want to use the Git special features?
+# Recommended value is 1
+LP_ENABLE_GIT=0
+
+# Do you want to use the Subversion special features?
+# Recommended value is 1
+LP_ENABLE_SVN=1
+
+# Do you want to use the Mercurial special features?
+# Recommended value is 1
+LP_ENABLE_HG=1
+
+# Do you want to use the Fossil special features?
+# Recommended value is 1
+LP_ENABLE_FOSSIL=1
+
+# Do you want to use the Bazaar special features?
+# Recommanded value is 1
+LP_ENABLE_BZR=1
+
+# Show time of the last prompt display
+# Recommended value is 0
+LP_ENABLE_TIME=0
+
+# Show runtime of the last command if over LP_RUNTIME_THRESHOLD
+# Recommended value is 0
+LP_ENABLE_RUNTIME=1
+
+# Minimal runtime to be displayed
+# Recommended value is 2
+LP_RUNTIME_THRESHOLD=2
+
+# Display the virtualenv that is currently activated, if any
+# Recommended value is 1
+LP_ENABLE_VIRTUALENV=1
+
+# Display the enabled software collections, if any
+# Recommended value is 1
+LP_ENABLE_SCLS=1
+
+# Show average system temperature
+LP_ENABLE_TEMP=1
+
+# When showing time, use an analog clock instead of numeric values.
+# The analog clock is "accurate" to the nearest half hour.
+# You must have a unicode-capable terminal and a font with the "CLOCK"
+# characters.
+# Recommended value is 0
+LP_TIME_ANALOG=0
+
+# Use the prompt as the title of the terminal window
+# The content is not customizable, the implementation is very basic,
+# and this may not work properly on exotic terminals, thus the
+# recommended value is 0
+# See LP_TITLE_OPEN and LP_TITLE_CLOSE to change escape characters to adapt this
+# feature to your specific terminal.
+LP_ENABLE_TITLE=0
+
+# Enable Title for screen and byobu
+LP_ENABLE_SCREEN_TITLE=0
+
+# Use differents colors for differents hosts you SSH in
+LP_ENABLE_SSH_COLORS=1
+
+# Specify a list of complete and colon (":") separated paths in which, all vcs
+# will be disabled
+LP_DISABLED_VCS_PATH=""
+
+# Enable Oh My Git!
+LP_ENABLE_OHMYGIT=1
+
+# Marks
 LP_MARK_BATTERY="B"
 LP_MARK_ADAPTER="A"
 LP_MARK_LOAD="L"
 LP_MARK_TEMP="T"
-LP_BATTERY_THRESHOLD="75"
-LP_ENABLE_RUNTIME=1
+
+# vim: set et sts=4 sw=4 tw=120 ft=sh:
+
+
 # vim: ft=sh: