Liquid prompt -- A useful adaptive prompt for Bash & Zsh ======================================================== Liquid prompt is a smart prompt for the "Bourne-Again" Unix shell (bash) and for Zsh. The basic idea of the liquid prompt is to nicely display useful informations on the shell prompt, only when they are needed. It adds carefuly chosen colors to draw your attention on what differs from the normal context. Thus, you will notice what changes, when it changes, because you do not become accommodated to informations that are always displayed in the same way. You can use it with either bash and zsh. ![Screenshot](https://raw.github.com/nojhan/liquidprompt/master/demo.png) ## FEATURES If there is nothing special in the current context, the liquid prompt is close to a default prompt: `[user:~] $ ` If you have ran one command in background that is still running and that you are in a git repository on a server, at branch "myb": `1r [user@server:~/liquidprompt] myb ± ` A liquid prompt displaying everything (a rare event!) may look like this: `code 🕤 ⌁24% ⌂42% 3d/2&/1z [user@server:~/ … /code/liquidprompt][pyenv]↥ master(+10/-5,3)*+ 125 ± ` It (may) displays: * A tag associated to the current shell session (you can easily add any prefix tag to your prompt, by invoking `prompt_tag MYTAG`). * The current time, either as numerci values or an analog clock, * a green ⏚ if the battery is charging, above the given threshold, but not charged, a yellow ⏚ if the battery is charging and under threshold, a yellow ⌁ if the battery is discharging but above threshold, a red ⌁ if the battery is discharging and under threshold; * the average of the batteries remaining power, if it is under the given threshold, with a colormap, going more and more red with decreasing power; * the average of the processors load, if it is over a given limit, with a colormap that became more and more noticeable with increasing load; * the number of detached sessions (`screen` or `tmux`), if there are any; * the number of attached sleeping jobs (when you interrupt a command with Ctrl-Z and bring it back with `fg`), if there are any; * the number of attached running jobs (commands started with a `&`), if there are any; * a pair of square brackets, in blue if your current shell is running in a terminal multiplexer (`screen` or `tmux`); * the current user, in bold yellow if it is root, in light white if it is not the same as the login user; * a green @ if the connection has X11 support, a yellow one if not; * the current host, if you are connected via a telnet connection (in bold red) or SSH (either a blue hostname or differents colors for different hosts); * a green colon if the user has write permissions on the current directory, a red one if he has not; * the current directory in bold, shortened if it takes too much space, while preserving the first two directories; * the current Python virtual environment, if any; * an up arrow if an HTTP proxy is in use; * the name of the current branch if you are in a version control repository (git, mercurial, subversion, bazaar or fossil), in green if everything is up to date, in red if there is changes, in yellow if there is pending commits to push; * the number of added/deleted lines (git) or files (fossil), if changes have been made and the number of pending commits, if any; * a yellow plus if there is stashed modifications; * a red star if there is some untracked files in the repository; * the error code of the last command, if it has failed in some way; * a smart mark: ± for git directories, ☿ for mercurial, ‡ for svn, ‡± for git-svn, ⌘ for fossil, $ or % for simple user, a red # for root; * if you ask for, the liquidprompt will be replicated in your terminal window's title (without the colors); You can temporarily deactivate the liquid prompt and come back to your previous one by typing `prompt_off`. Use `prompt_on` to bring it back. You can deactivate any prompt and use a single mark sign (`$ ` for user and `# ` for root) with the `prompt_OFF` command. ## INSTALL Include the file in your bash configuration, for example in your `.bashrc`: `source liquidprompt` Copy the `liquidpromptrc-dist` file in your home directory as `~/.config/liquidpromptrc` or `~/.liquidpromptrc` and edit it according to your preferences. If you skip this step, the default behaviour will be used. Note that you should not overwrite the `PROMPT_COMMAND` variable, or else the prompt will not be available. ## DEPENDENCIES Apart from obvious ones, some features depends on specific commands. If you do not install them, the corresponding feature will not be available, but you will see no error. * battery status needs `acpi`. * detached sessions is looking for `screen` and/or `tmux`. * VCS support features needs… `git`, `hg` or `svn`, but you knew it. For other features, the script uses commands that should be available on a large variety of unixes: `tput`, `grep`, `awk`, `sed`, `ps`, `who`. ## FEATURES CONFIGURATION You can configure some variables in the `~/.liquidpromptrc` file: * `LP_BATTERY_THRESHOLD`, the maximal value under which the battery level is displayed * `LP_LOAD_THRESHOLD`, the minimal value after which the load average is displayed * `LP_PATH_LENGTH`, the maximum percentage of the screen width used to display the path * `LP_PATH_KEEP`, how many directories to keep at the beginning of a shortened path * `LP_HOSTNAME_ALWAYS`, choose between always displaying the hostname or showing it only when connected with a remote shell * `LP_USER_ALWAYS`, choose between always displaying the user or showing it only when he is different from the logged one You can also force some features to be disabled, to save some time in the prompt building: * `LP_ENABLE_PERM`, if you want to detect if the directory is writable * `LP_ENABLE_SHORTEN_PATH`, if you want to shorten the path display * `LP_ENABLE_PROXY`, if you want to detect if a proxy is used * `LP_ENABLE_JOBS`, if you want to have jobs informations * `LP_ENABLE_LOAD`, if you want to have load informations * `LP_ENABLE_BATT`, if you want to have battery informations * `LP_ENABLE_GIT`, if you want to have git informations * `LP_ENABLE_SVN`, if you want to have subversion informations * `LP_ENABLE_HG`, if you want to have mercurial informations * `LP_ENABLE_BZR`, if you want to have bazaar informations * `LP_ENABLE_FOSSIL`, if you want to have fossil informations * `LP_ENABLE_VCS_ROOT`, if you want to show VCS informations with root account * `LP_ENABLE_TITLE`, if you want to use the prompt as your terminal window's title * `LP_ENABLE_SCREEN_TITLE`, if you want to use the prompt as your screen window's title * `LP_ENABLE_SSH_COLORS`, if you want different colors for hosts you SSH in * `LP_ENABLE_TIME`, if you want to display the time at which the prompt was shown * `LP_TIME_ANALOG`, when showing time, use an analog clock instead of numeric values Note that if required commands are not installed, enabling the corresponding feature will have no effect. Note also that all the `LP_ENABLE_…` variables override the templates, i.e. if you use `$LP_BATT` in your template and you set `LP_ENABLE_BATT=0` in your config file, you will not have the battery informations. If you are using bash and want to use the `PROMPT_DIRTRIM` built-in functionality to shorten but still have liquidprompt calculating the number of directories to keep in the path, precise a value for `PROMPT_DIRTRIM` before sourcing liquidprompt and liquidprompt will override this value with one fitting the width of your terminal. You may face performances decrease when using VCS located in remote directories. To avoid that, you can set the `LP_DISABLED_VCS_PATH` variable to a list of absolute and colon (":") separated paths where VCS-related features will be disabled. ## CUSTOMIZING THE PROMPT ### ADD A PS1 PREFIX You can prefix the `LP_PS1` variable with anything you want using the `LP_PS1_PREFIX`. The following example activate a custom window's title: LP_PS1_PREFIX="\[\e]0;\u@\h: \w\a\]" Note: the `prompt_tag` function is convenient way to add a prefix. You can thus add a keyword to your different terminals: [:~/code/liquidprompt] develop ± prompt_tag mycode mycode [:~/code/liquidprompt] develop ± ### PUT THE PROMPT IN A DIFFERENT ORDER You can sort what you want to see by sourcing your favorite template file (`*.ps1`) in the configuration file. You can start from the `liquid.ps1` file, which show the default settings. To use your own configuration, just set `LP_PS1_FILE` to your own file path in your `~/.liquipromptrc` and you're done. Those scripts basically export the `LP_PS1` variable, by appending features and theme colors. Available features: * `LP_BATT` battery * `LP_LOAD` load * `LP_JOBS` detached screen or tmux sessions/running jobs/suspended jobs * `LP_USER` user * `LP_HOST` hostname * `LP_PERM` a colon ":" * `LP_PWD` current working directory * `LP_PROXY` HTTP proxy * `LP_VCS` informations concerning the current working repository * `LP_ERR` last error code * `LP_MARK` prompt mark * `LP_TITLE` the prompt as a window's title escaped sequence For example, if you just want to have a liquidprompt displaying the user and the host, with a normal full path in blue and only the git support: export LP_PS1=`echo -ne "[\${LP_USER}\${LP_HOST}:\${BLUE}\$(pwd)\${NO_COL}] \${LP_GIT} \\\$ "` Note that you need to properly escape dollars in a string that wil be interpreted by bash at each prompt. To erase your new formatting, just bring the `LP_PS1` to a null string: export LP_PS1="" ## THEMES You can change the colors and special characters of some part of the liquid prompt by sourcing your favorite theme file (`*.theme`) in the configuration file. ### COLORS Available colors are: BOLD, BLACK, BOLD_GRAY, WHITE, BOLD_WHITE, GREEN, BOLD_GREEN, YELLOW, BOLD_YELLOW, BLUE, BOLD_BLUE, PINK, CYAN, BOLD_CYAN RED, BOLD_RED, WARN_RED, CRIT_RED, DANGER_RED, NO_COL. Set to a null string "" if you do not want color. * Current working directory * `LP_COLOR_PATH` as normal user * `LP_COLOR_PATH_ROOT` as root * Color of the proxy mark * `LP_COLOR_PROXY` * Jobs count * `LP_COLOR_JOB_D` Detached (screen/tmux sessions without attached clients) * `LP_COLOR_JOB_R` Running (xterm &) * `LP_COLOR_JOB_Z` Sleeping (Ctrl-Z) * `LP_COLOR_IN_MULTIPLEXER` currently running in a terminal multiplexer * Last error code * `LP_COLOR_ERR` * Prompt mark * `LP_COLOR_MARK` as user * `LP_COLOR_MARK_ROOT` as root * Current user * `LP_COLOR_USER_LOGGED` user who logged in * `LP_COLOR_USER_ALT` user but not the one who logged in * `LP_COLOR_USER_ROOT` root * Hostname * `LP_COLOR_HOST` local host * `LP_COLOR_SSH` connected via SSH * `LP_COLOR_TELNET` connected via telnet * `LP_COLOR_X11_ON` connected with X11 support * `LP_COLOR_X11_OFF` connected without X11 support * Separation mark (by default, the colon before the path) * `LP_COLOR_WRITE` have write permission * `LP_COLOR_NOWRITE` do not have write permission * VCS * `LP_COLOR_UP` repository is up to date / a push have been made * `LP_COLOR_COMMITS` some commits have not been pushed * `LP_COLOR_CHANGES` there is some changes to commit * `LP_COLOR_DIFF` number of lines or files impacted by current changes * Battery * `LP_COLOR_CHARGING_ABOVE` charging and above threshold * `LP_COLOR_CHARGING_UNDER` charging but under threshold * `LP_COLOR_DISCHARGING_ABOVE` discharging but above threshold * `LP_COLOR_DISCHARGING_UNDER` discharging and under threshold ### CHARACTERS Special characters: * `LP_MARK_DEFAULT` (default: "") the mark you want at the end of your prompt (leave to empty for your shell default mark) * `LP_MARK_BATTERY` (default: "⌁") in front of the battery charge * `LP_MARK_ADAPTER` (default: "⏚") displayed when plugged * `LP_MARK_LOAD` (default: "⌂") in front of the load * `LP_MARK_PROXY` (default: "↥") indicate a proxy in use * `LP_MARK_HG` (default: "☿") prompt mark in hg repositories * `LP_MARK_SVN` (default: "‡") prompt mark in svn repositories * `LP_MARK_GIT` (default: "±") prompt mark in git repositories * `LP_MARK_FOSSIL` (default: "⌘") prompt mark in fossil repositories * `LP_MARK_BZR` (default: "⚯") prompt mark in bazaar repositories * `LP_MARK_UNTRACKED` (default: "*") if git has untracked files * `LP_MARK_STASH` (default: "+") if git has stashed modifications * `LP_MARK_BRACKET_OPEN` (default: "[") marks around the main part of the prompt * `LP_MARK_BRACKET_CLOSE` (default: "]") marks around the main part of the prompt * `LP_TITLE_OPEN` (default: "\e]0;") escape character opening a window's title * `LP_TITLE_CLOSE` (default: "\a") escape character closing a window's title * `LP_SCREEN_TITLE_OPEN` (default: "\033k") escape character opening screen window's title * `LP_SCREEN_TITLE_CLOSE` (default: "\033\134") escape character closing screen window's title ## KNOWN LIMITATIONS AND BUGS Liquid prompt is distributed under the GNU Affero General Public License version 3. * Does not display the number of commits to be pushed in Mercurial repositories. * Browsing into very large subversion repositories may dramatically slow down the display of the liquid prompt (use `LP_DISABLED_VCS_PATH` to avoid that). * Subversion repository cannot display commits to be pushed, this is a limitation of the Subversion versionning model. * The proxy detection only uses the `$http_proxy` environment variable. * The window's title escape sequence may not work properly on some terminals (like xterm-256) * The analog clock necessitate a unicode-aware terminal and a sufficiently complete font.