i3/docs/hacking-howto

Hacking i3: How To
==================
Michael Stapelberg <michael+i3@stapelberg.de>
December 2009

This document is intended to be the first thing you read before looking and/or
touching i3’s source code. It should contain all important information to help
you understand why things are like they are. If it does not mention something
you find necessary, please do not hesitate to contact me.

== Window Managers

A window manager is not necessarily needed to run X, but it is usually used in
combination with X to facilitate some things. The window manager's job is to
take care of the placement of windows, to provide the user with some mechanisms
to change the position/size of windows and to communicate with clients to a
certain extent (for example handle fullscreen requests of clients such as
MPlayer).

There are no different contexts in which X11 clients run, so a window manager
is just another client, like all other X11 applications. However, it handles
some events which normal clients usually don’t handle.

In the case of i3, the tasks (and order of them) are the following:

. Grab the key bindings (events will be sent upon keypress/keyrelease)
. Iterate through all existing windows (if the window manager is not started as
  the first client of X) and manage them (reparent them, create window
  decorations, etc.)
. When new windows are created, manage them
. Handle the client’s `_WM_STATE` property, but only the `_WM_STATE_FULLSCREEN`
. Handle the client’s `WM_NAME` property
. Handle the client’s size hints to display them proportionally
. Handle the client’s urgency hint
. Handle enter notifications (focus follows mouse)
. Handle button (as in mouse buttons) presses for focus/raise on click
. Handle expose events to re-draw own windows such as decorations
. React to the user’s commands: Change focus, Move windows, Switch workspaces,
  Change the layout mode of a container (default/stacking/tabbed), start a new
  application, restart the window manager

In the following chapters, each of these tasks and their implementation details
will be discussed.

=== Tiling window managers

Traditionally, there are two approaches to managing windows: The most common
one nowadays is floating, which means the user can freely move/resize the
windows. The other approach is called tiling, which means that your window
manager distributes windows to use as much space as possible while not
overlapping each other.

The idea behind tiling is that you should not need to waste your time
moving/resizing windows while you usually want to get some work done. After
all, most users sooner or later tend to lay out their windows in a way which
corresponds to tiling or stacking mode in i3. Therefore, why not let i3 do this
for you? Certainly, it’s faster than you could ever do it.

The problem with most tiling window managers is that they are too unflexible.
In my opinion, a window manager is just another tool, and similar to vim which
can edit all kinds of text files (like source code, HTML, …) and is not limited
to a specific file type, a window manager should not limit itself to a certain
layout (like dwm, awesome, …) but provide mechanisms for you to easily create
the layout you need at the moment.

=== The layout table

To accomplish flexible layouts, we decided to simply use a table. The table
grows and shrinks as you need it. Each cell holds a container which then holds
windows (see picture below). You can use different layouts for each container
(default layout and stacking layout).

So, when you open a terminal and immediately open another one, they reside in
the same container, in default layout. The layout table has exactly one column,
one row and therefore one cell. When you move one of the terminals to the
right, the table needs to grow. It will be expanded to two columns and one row.
This enables you to have different layouts for each container. The table then
looks like this:

[width="15%",cols="^,^"]
|========
| T1 | T2
|========

When moving terminal 2 to the bottom, the table will be expanded again.

[width="15%",cols="^,^"]
|========
| T1 |
|    | T2
|========

You can really think of the layout table like a traditional HTML table, if
you’ve ever designed one. Especially col- and rowspan work similarly. Below,
you see an example of colspan=2 for the first container (which has T1 as
window).

[width="15%",cols="^asciidoc"]
|========
| T1
|
[cols="^,^",frame="none"]
!========
! T2 ! T3
!========
|========

Furthermore, you can freely resize table cells.

== Files

include/data.h::
Contains data definitions used by nearly all files. You really need to read
this first.

include/*.h::
Contains forward definitions for all public functions, as well as
doxygen-compatible comments (so if you want to get a bit more of the big
picture, either browse all header files or use doxygen if you prefer that).

src/cfgparse.l::
Contains the lexer for i3’s configuration file, written for +flex(1)+.

src/cfgparse.y::
Contains the parser for i3’s configuration file, written for +bison(1)+.

src/click.c::
Contains all functions which handle mouse button clicks (right mouse button
clicks initiate resizing and thus are relatively complex).

src/client.c::
Contains all functions which are specific to a certain client (make it
fullscreen, see if its class/name matches a pattern, kill it, …).

src/commands.c::
Parsing commands and actually executing them (focusing, moving, …).

src/config.c::
Parses the configuration file.

src/debug.c::
Contains debugging functions to print unhandled X events.

src/floating.c::
Contains functions for floating mode (mostly resizing/dragging).

src/handlers.c::
Contains all handlers for all kinds of X events (new window title, new hints,
unmapping, key presses, button presses, …).

src/ipc.c::
Contains code for the IPC interface.

src/layout.c::
Renders your layout (screens, workspaces, containers).

src/mainx.c::
Initializes the window manager.

src/manage.c::
Looks at existing or new windows and decides whether to manage them. If so, it
reparents the window and inserts it into our data structures.

src/resize.c::
Contains the functions to resize columns/rows in the table.

src/table.c::
Manages the most important internal data structure, the design table.

src/util.c::
Contains useful functions which are not really dependant on anything.

src/workspace.c::
Contains all functions related to workspaces (displaying, hiding, renaming…)

src/xcb.c::
Contains wrappers to use xcb more easily.

src/xinerama.c::
(Re-)initializes the available screens and converts them to virtual screens
(see below).

== Data structures

See include/data.h for documented data structures. The most important ones are
explained right here.

image:bigpicture.png[The Big Picture]

So, the hierarchy is:

. *Virtual screens* (Screen 0 in this example)
. *Workspaces* (Workspace 1 in this example)
. *Table* (There can only be one table per Workspace)
. *Container* (left and right in this example)
. *Client* (The two clients in the left container)

=== Virtual screens

A virtual screen (type `i3Screen`) is generated from the connected screens
obtained through Xinerama. The difference to the raw Xinerama monitors as seen
when using +xrandr(1)+ is that it falls back to the lowest common resolution of
the logical screens.

For example, if your notebook has 1280x800 and you connect a video projector
with 1024x768, set up in clone mode (+xrandr \--output VGA \--mode 1024x768
\--same-as LVDS+), i3 will have one virtual screen.

However, if you configure it using +xrandr \--output VGA \--mode 1024x768
\--right-of LVDS+, i3 will generate two virtual screens. For each virtual
screen, a new workspace will be assigned. New workspaces are created on the
screen you are currently on.

=== Workspace

A workspace is identified by its number. Basically, you could think of
workspaces as different desks in your office, if you like the desktop
methaphor. They just contain different sets of windows and are completely
seperate of each other. Other window managers also call this ``Virtual
desktops''.

=== The layout table

Each workspace has a table, which is just a two-dimensional dynamic array
containing Containers (see below). This table grows and shrinks as you need it
(by moving windows to the right you can create a new column in the table, by
moving them to the bottom you create a new row).

=== Container

A container is the content of a table’s cell. It holds an arbitrary amount of
windows and has a specific layout (default layout, stack layout or tabbed
layout). Containers can consume multiple table cells by modifying their
colspan/rowspan attribute.

=== Client

A client is x11-speak for a window.

== List/queue macros

i3 makes heavy use of the list macros defined in BSD operating systems. To
ensure that the operating system on which i3 is compiled has all the expected
features, i3 comes with `include/queue.h`. On BSD systems, you can use man
`queue(3)`. On Linux, you have to use google (or read the source).

The lists used are `SLIST` (single linked lists), `CIRCLEQ` (circular
queues) and TAILQ (tail queues). Usually, only forward traversal is necessary,
so an `SLIST` works fine. If inserting elements at arbitrary positions or at
the end of a list is necessary, a `TAILQ` is used instead. However, for the
windows inside a container, a `CIRCLEQ` is necessary to go from the currently
selected window to the window above/below.

== Naming conventions

There is a row of standard variables used in many events. The following names
should be chosen for those:

 * ``conn'' is the xcb_connection_t
 * ``event'' is the event of the particular type
 * ``container'' names a container
 * ``client'' names a client, for example when using a +CIRCLEQ_FOREACH+

== Startup (src/mainx.c, main())

 * Establish the xcb connection
 * Check for XKB extension on the seperate X connection
 * Check for Xinerama screens
 * Grab the keycodes for which bindings exist
 * Manage all existing windows
 * Enter the event loop

== Keybindings

=== Grabbing the bindings

Grabbing the bindings is quite straight-forward. You pass X your combination of
modifiers and the keycode you want to grab and whether you want to grab them
actively or passively. Most bindings (everything except for bindings using
Mode_switch) are grabbed passively, that is, just the window manager gets the
event and cannot replay it.

We need to grab bindings that use Mode_switch actively because of a bug in X.
When the window manager receives the keypress/keyrelease event for an actively
grabbed keycode, it has to decide what to do with this event: It can either
replay it so that other applications get it or it can prevent other
applications from receiving it.

So, why do we need to grab keycodes actively? Because X does not set the
state-property of keypress/keyrelease events properly. The Mode_switch bit is
not set and we need to get it using XkbGetState. This means we cannot pass X
our combination of modifiers containing Mode_switch when grabbing the key and
therefore need to grab the keycode itself without any modifiers. This means,
if you bind Mode_switch + keycode 38 ("a"), i3 will grab keycode 38 ("a") and
check on each press of "a" if the Mode_switch bit is set using XKB. If yes, it
will handle the event, if not, it will replay the event.

=== Handling a keypress

As mentioned in "Grabbing the bindings", upon a keypress event, i3 first gets
the correct state.

Then, it looks through all bindings and gets the one which matches the received
event.

The bound command is parsed directly in command mode.

== Manage windows (src/mainx.c, manage_window() and reparent_window())

`manage_window()` does some checks to decide whether the window should be
managed at all:

 * Windows have to be mapped, that is, visible on screen
 * The override_redirect must not be set. Windows with override_redirect shall
   not be managed by a window manager

Afterwards, i3 gets the intial geometry and reparents the window (see
`reparent_window()`) if it wasn’t already managed.

Reparenting means that for each window which is reparented, a new window,
slightly larger than the original one, is created. The original window is then
reparented to the bigger one (called "frame").

After reparenting, the window type (`_NET_WM_WINDOW_TYPE`) is checked to see
whether this window is a dock (`_NET_WM_WINDOW_TYPE_DOCK`), like dzen2 for
example. Docks are handled differently, they don’t have decorations and are not
assigned to a specific container. Instead, they are positioned at the bottom
of the screen. To get the height which needsd to be reserved for the window,
the `_NET_WM_STRUT_PARTIAL` property is used.

Furthermore, the list of assignments (to other workspaces, which may be on
other screens) is checked. If the window matches one of the user’s criteria,
it may either be put in floating mode or moved to a different workspace. If the
target workspace is not visible, the window will not be mapped.

== What happens when an application is started?

i3 does not care for applications. All it notices is when new windows are
mapped (see `src/handlers.c`, `handle_map_request()`). The window is then
reparented (see section "Manage windows").

After reparenting the window, `render_layout()` is called which renders the
internal layout table. The new window has been placed in the currently focused
container and therefore the new window and the old windows (if any) need to be
moved/resized so that the currently active layout (default/stacking/tabbed mode)
is rendered correctly. To move/resize windows, a window is ``configured'' in
X11-speak.

Some applications, such as MPlayer obviously assume the window manager is
stupid and try to configure their windows by themselves. This generates an
event called configurerequest. i3 handles these events and tells the window the
size it had before the configurerequest (with the exception of not yet mapped
windows, which get configured like they want to, and floating windows, which
can reconfigure themselves).

== _NET_WM_STATE

Only the _NET_WM_STATE_FULLSCREEN atom is handled. It calls
``toggle_fullscreen()'' for the specific client which just configures the
client to use the whole screen on which it currently is. Also, it is set as
fullscreen_client for the i3Screen.

== WM_NAME

When the WM_NAME property of a window changes, its decoration (containing the
title) is re-rendered. Note that WM_NAME is in COMPOUND_TEXT encoding which is
totally uncommon and cumbersome. Therefore, the _NET_WM_NAME atom will be used
if present.

== _NET_WM_NAME

Like WM_NAME, this atom contains the title of a window. However, _NET_WM_NAME
is encoded in UTF-8. i3 will recode it to UCS-2 in order to be able to pass it
to X. Using an appropriate font (ISO-10646), you can see most special
characters (every special character contained in your font).

== Size hints

Size hints specify the minimum/maximum size for a given window as well as its
aspect ratio.  This is important for clients like mplayer, who only set the
aspect ratio and resize their window to be as small as possible (but only with
some video outputs, for example in Xv, while when using x11, mplayer does the
necessary centering for itself).

So, when an aspect ratio was specified, i3 adjusts the height of the window
until the size maintains the correct aspect ratio. For the code to do this, see
src/layout.c, function resize_client().

== Rendering (src/layout.c, render_layout() and render_container())

There are several entry points to rendering: `render_layout()`,
`render_workspace()` and `render_container()`. The former one calls
`render_workspace()` for every screen, which in turn will call
`render_container()` for every container inside its layout table. Therefore, if
you need to render only a single container, for example because a window was
removed, added or changed its title, you should directly call
render_container().

Rendering consists of two steps: In the first one, in `render_workspace()`, each
container gets its position (screen offset + offset in the table) and size
(container's width times colspan/rowspan). Then, `render_container()` is called,
which takes different approaches, depending on the mode the container is in:

=== Common parts

On the frame (the window which was created around the client’s window for the
decorations), a black rectangle is drawn as a background for windows like
MPlayer, which do not completely fit into the frame.

=== Default mode

Each clients gets the container’s width and an equal amount of height.

=== Stack mode

In stack mode, a window containing the decorations of all windows inside the
container is placed at the top. The currently focused window is then given the
whole remaining space.

=== Tabbed mode

Tabbed mode is like stack mode, except that the window decorations are drawn
in one single line at the top of the container.

=== Window decorations

The window decorations consist of a rectangle in the appropriate color (depends
on whether this window is the currently focused one, the last focused one in a
not focused container or not focused at all) forming the background.
Afterwards, two lighter lines are drawn and the last step is drawing the
window’s title (see WM_NAME) onto it.

=== Fullscreen windows

For fullscreen windows, the `rect` (x, y, width, height) is not changed to
allow the client to easily go back to its previous position. Instead,
fullscreen windows are skipped when rendering.

=== Resizing containers

By clicking and dragging the border of a container, you can resize the whole
column (respectively row) which this container is in. This is necessary to keep
the table layout working and consistent.

The resizing works similarly to the resizing of floating windows or movement of
floating windows:

* A new, invisible window with the size of the root window is created
  (+grabwin+)
* Another window, 2px width and as high as your screen (or vice versa for
  horizontal resizing) is created. Its background color is the border color and
  it is only there to inform the user how big the container will be (it
  creates the impression of dragging the border out of the container).
* The +drag_pointer+ function of +src/floating.c+ is called to grab the pointer
  and enter its own event loop which will pass all events (expose events) but
  motion notify events. This function then calls the specified callback
  (+resize_callback+) which does some boundary checking and moves the helper
  window. As soon as the mouse button is released, this loop will be
  terminated.
* The new width_factor for each involved column (respectively row) will be
  calculated.

== User commands / commandmode (src/commands.c)

Like in vim, you can control i3 using commands. They are intended to be a
powerful alternative to lots of shortcuts, because they can be combined. There
are a few special commands, which are the following:

exec <command>::
Starts the given command by passing it to `/bin/sh`.

restart::
Restarts i3 by executing `argv[0]` (the path with which you started i3) without
forking.

w::
"With". This is used to select a bunch of windows. Currently, only selecting
the whole container in which the window is in, is supported by specifying "w".

f, s, d::
Toggle fullscreen, stacking, default mode for the current window/container.

The other commands are to be combined with a direction. The directions are h,
j, k and l, like in vim (h = left, j = down, k = up, l = right). When you just
specify the direction keys, i3 will move the focus in that direction. You can
provide "m" or "s" before the direction to move a window respectively or snap.

== Gotchas

* Forgetting to call `xcb_flush(conn);` after sending a request. This usually
  leads to code which looks like it works fine but which does not work under
  certain conditions.

== Using git / sending patches

For a short introduction into using git, see
http://www.spheredev.org/wiki/Git_for_the_lazy or, for more documentation, see
http://git-scm.com/documentation

When you want to send a patch because you fixed a bug or implemented a cool
feature (please talk to us before working on features to see whether they are
maybe already implemented, not possible for some some reason, or don’t fit
into the concept), please use git to create a patchfile.

First of all, update your working copy to the latest version of the master
branch:

--------
git pull
--------

Afterwards, make the necessary changes for your bugfix/feature. Then, review
the changes using +git diff+ (you might want to enable colors in the diff using
+git config diff.color auto+).  When you are definitely done, use +git commit
-a+ to commit all changes you’ve made.

Then, use the following command to generate a patchfile which we can directly
apply to the branch, preserving your commit message and name:

-----------------------
git format-patch origin
-----------------------

Just send us the generated file via email.