droidVncServer/jni/openssl/crypto/bn/asm/ppc-mont.pl
2012-06-10 19:35:02 +01:00

324 lines
7.2 KiB
Raku
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#!/usr/bin/env perl
# ====================================================================
# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
# April 2006
# "Teaser" Montgomery multiplication module for PowerPC. It's possible
# to gain a bit more by modulo-scheduling outer loop, then dedicated
# squaring procedure should give further 20% and code can be adapted
# for 32-bit application running on 64-bit CPU. As for the latter.
# It won't be able to achieve "native" 64-bit performance, because in
# 32-bit application context every addc instruction will have to be
# expanded as addc, twice right shift by 32 and finally adde, etc.
# So far RSA *sign* performance improvement over pre-bn_mul_mont asm
# for 64-bit application running on PPC970/G5 is:
#
# 512-bit +65%
# 1024-bit +35%
# 2048-bit +18%
# 4096-bit +4%
$flavour = shift;
if ($flavour =~ /32/) {
$BITS= 32;
$BNSZ= $BITS/8;
$SIZE_T=4;
$RZONE= 224;
$FRAME= $SIZE_T*16;
$LD= "lwz"; # load
$LDU= "lwzu"; # load and update
$LDX= "lwzx"; # load indexed
$ST= "stw"; # store
$STU= "stwu"; # store and update
$STX= "stwx"; # store indexed
$STUX= "stwux"; # store indexed and update
$UMULL= "mullw"; # unsigned multiply low
$UMULH= "mulhwu"; # unsigned multiply high
$UCMP= "cmplw"; # unsigned compare
$SHRI= "srwi"; # unsigned shift right by immediate
$PUSH= $ST;
$POP= $LD;
} elsif ($flavour =~ /64/) {
$BITS= 64;
$BNSZ= $BITS/8;
$SIZE_T=8;
$RZONE= 288;
$FRAME= $SIZE_T*16;
# same as above, but 64-bit mnemonics...
$LD= "ld"; # load
$LDU= "ldu"; # load and update
$LDX= "ldx"; # load indexed
$ST= "std"; # store
$STU= "stdu"; # store and update
$STX= "stdx"; # store indexed
$STUX= "stdux"; # store indexed and update
$UMULL= "mulld"; # unsigned multiply low
$UMULH= "mulhdu"; # unsigned multiply high
$UCMP= "cmpld"; # unsigned compare
$SHRI= "srdi"; # unsigned shift right by immediate
$PUSH= $ST;
$POP= $LD;
} else { die "nonsense $flavour"; }
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
$sp="r1";
$toc="r2";
$rp="r3"; $ovf="r3";
$ap="r4";
$bp="r5";
$np="r6";
$n0="r7";
$num="r8";
$rp="r9"; # $rp is reassigned
$aj="r10";
$nj="r11";
$tj="r12";
# non-volatile registers
$i="r14";
$j="r15";
$tp="r16";
$m0="r17";
$m1="r18";
$lo0="r19";
$hi0="r20";
$lo1="r21";
$hi1="r22";
$alo="r23";
$ahi="r24";
$nlo="r25";
#
$nhi="r0";
$code=<<___;
.machine "any"
.text
.globl .bn_mul_mont
.align 4
.bn_mul_mont:
cmpwi $num,4
mr $rp,r3 ; $rp is reassigned
li r3,0
bltlr
slwi $num,$num,`log($BNSZ)/log(2)`
li $tj,-4096
addi $ovf,$num,`$FRAME+$RZONE`
subf $ovf,$ovf,$sp ; $sp-$ovf
and $ovf,$ovf,$tj ; minimize TLB usage
subf $ovf,$sp,$ovf ; $ovf-$sp
srwi $num,$num,`log($BNSZ)/log(2)`
$STUX $sp,$sp,$ovf
$PUSH r14,`4*$SIZE_T`($sp)
$PUSH r15,`5*$SIZE_T`($sp)
$PUSH r16,`6*$SIZE_T`($sp)
$PUSH r17,`7*$SIZE_T`($sp)
$PUSH r18,`8*$SIZE_T`($sp)
$PUSH r19,`9*$SIZE_T`($sp)
$PUSH r20,`10*$SIZE_T`($sp)
$PUSH r21,`11*$SIZE_T`($sp)
$PUSH r22,`12*$SIZE_T`($sp)
$PUSH r23,`13*$SIZE_T`($sp)
$PUSH r24,`14*$SIZE_T`($sp)
$PUSH r25,`15*$SIZE_T`($sp)
$LD $n0,0($n0) ; pull n0[0] value
addi $num,$num,-2 ; adjust $num for counter register
$LD $m0,0($bp) ; m0=bp[0]
$LD $aj,0($ap) ; ap[0]
addi $tp,$sp,$FRAME
$UMULL $lo0,$aj,$m0 ; ap[0]*bp[0]
$UMULH $hi0,$aj,$m0
$LD $aj,$BNSZ($ap) ; ap[1]
$LD $nj,0($np) ; np[0]
$UMULL $m1,$lo0,$n0 ; "tp[0]"*n0
$UMULL $alo,$aj,$m0 ; ap[1]*bp[0]
$UMULH $ahi,$aj,$m0
$UMULL $lo1,$nj,$m1 ; np[0]*m1
$UMULH $hi1,$nj,$m1
$LD $nj,$BNSZ($np) ; np[1]
addc $lo1,$lo1,$lo0
addze $hi1,$hi1
$UMULL $nlo,$nj,$m1 ; np[1]*m1
$UMULH $nhi,$nj,$m1
mtctr $num
li $j,`2*$BNSZ`
.align 4
L1st:
$LDX $aj,$ap,$j ; ap[j]
addc $lo0,$alo,$hi0
$LDX $nj,$np,$j ; np[j]
addze $hi0,$ahi
$UMULL $alo,$aj,$m0 ; ap[j]*bp[0]
addc $lo1,$nlo,$hi1
$UMULH $ahi,$aj,$m0
addze $hi1,$nhi
$UMULL $nlo,$nj,$m1 ; np[j]*m1
addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[0]
$UMULH $nhi,$nj,$m1
addze $hi1,$hi1
$ST $lo1,0($tp) ; tp[j-1]
addi $j,$j,$BNSZ ; j++
addi $tp,$tp,$BNSZ ; tp++
bdnz- L1st
;L1st
addc $lo0,$alo,$hi0
addze $hi0,$ahi
addc $lo1,$nlo,$hi1
addze $hi1,$nhi
addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[0]
addze $hi1,$hi1
$ST $lo1,0($tp) ; tp[j-1]
li $ovf,0
addc $hi1,$hi1,$hi0
addze $ovf,$ovf ; upmost overflow bit
$ST $hi1,$BNSZ($tp)
li $i,$BNSZ
.align 4
Louter:
$LDX $m0,$bp,$i ; m0=bp[i]
$LD $aj,0($ap) ; ap[0]
addi $tp,$sp,$FRAME
$LD $tj,$FRAME($sp) ; tp[0]
$UMULL $lo0,$aj,$m0 ; ap[0]*bp[i]
$UMULH $hi0,$aj,$m0
$LD $aj,$BNSZ($ap) ; ap[1]
$LD $nj,0($np) ; np[0]
addc $lo0,$lo0,$tj ; ap[0]*bp[i]+tp[0]
$UMULL $alo,$aj,$m0 ; ap[j]*bp[i]
addze $hi0,$hi0
$UMULL $m1,$lo0,$n0 ; tp[0]*n0
$UMULH $ahi,$aj,$m0
$UMULL $lo1,$nj,$m1 ; np[0]*m1
$UMULH $hi1,$nj,$m1
$LD $nj,$BNSZ($np) ; np[1]
addc $lo1,$lo1,$lo0
$UMULL $nlo,$nj,$m1 ; np[1]*m1
addze $hi1,$hi1
$UMULH $nhi,$nj,$m1
mtctr $num
li $j,`2*$BNSZ`
.align 4
Linner:
$LDX $aj,$ap,$j ; ap[j]
addc $lo0,$alo,$hi0
$LD $tj,$BNSZ($tp) ; tp[j]
addze $hi0,$ahi
$LDX $nj,$np,$j ; np[j]
addc $lo1,$nlo,$hi1
$UMULL $alo,$aj,$m0 ; ap[j]*bp[i]
addze $hi1,$nhi
$UMULH $ahi,$aj,$m0
addc $lo0,$lo0,$tj ; ap[j]*bp[i]+tp[j]
$UMULL $nlo,$nj,$m1 ; np[j]*m1
addze $hi0,$hi0
$UMULH $nhi,$nj,$m1
addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[i]+tp[j]
addi $j,$j,$BNSZ ; j++
addze $hi1,$hi1
$ST $lo1,0($tp) ; tp[j-1]
addi $tp,$tp,$BNSZ ; tp++
bdnz- Linner
;Linner
$LD $tj,$BNSZ($tp) ; tp[j]
addc $lo0,$alo,$hi0
addze $hi0,$ahi
addc $lo0,$lo0,$tj ; ap[j]*bp[i]+tp[j]
addze $hi0,$hi0
addc $lo1,$nlo,$hi1
addze $hi1,$nhi
addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[i]+tp[j]
addze $hi1,$hi1
$ST $lo1,0($tp) ; tp[j-1]
addic $ovf,$ovf,-1 ; move upmost overflow to XER[CA]
li $ovf,0
adde $hi1,$hi1,$hi0
addze $ovf,$ovf
$ST $hi1,$BNSZ($tp)
;
slwi $tj,$num,`log($BNSZ)/log(2)`
$UCMP $i,$tj
addi $i,$i,$BNSZ
ble- Louter
addi $num,$num,2 ; restore $num
subfc $j,$j,$j ; j=0 and "clear" XER[CA]
addi $tp,$sp,$FRAME
mtctr $num
.align 4
Lsub: $LDX $tj,$tp,$j
$LDX $nj,$np,$j
subfe $aj,$nj,$tj ; tp[j]-np[j]
$STX $aj,$rp,$j
addi $j,$j,$BNSZ
bdnz- Lsub
li $j,0
mtctr $num
subfe $ovf,$j,$ovf ; handle upmost overflow bit
and $ap,$tp,$ovf
andc $np,$rp,$ovf
or $ap,$ap,$np ; ap=borrow?tp:rp
.align 4
Lcopy: ; copy or in-place refresh
$LDX $tj,$ap,$j
$STX $tj,$rp,$j
$STX $j,$tp,$j ; zap at once
addi $j,$j,$BNSZ
bdnz- Lcopy
$POP r14,`4*$SIZE_T`($sp)
$POP r15,`5*$SIZE_T`($sp)
$POP r16,`6*$SIZE_T`($sp)
$POP r17,`7*$SIZE_T`($sp)
$POP r18,`8*$SIZE_T`($sp)
$POP r19,`9*$SIZE_T`($sp)
$POP r20,`10*$SIZE_T`($sp)
$POP r21,`11*$SIZE_T`($sp)
$POP r22,`12*$SIZE_T`($sp)
$POP r23,`13*$SIZE_T`($sp)
$POP r24,`14*$SIZE_T`($sp)
$POP r25,`15*$SIZE_T`($sp)
$POP $sp,0($sp)
li r3,1
blr
.long 0
.asciz "Montgomery Multiplication for PPC, CRYPTOGAMS by <appro\@fy.chalmers.se>"
___
$code =~ s/\`([^\`]*)\`/eval $1/gem;
print $code;
close STDOUT;