diff --git a/jni/vnc/LibVNCServer-0.9.9/AUTHORS b/jni/vnc/LibVNCServer-0.9.9/AUTHORS new file mode 100644 index 0000000..76b17b5 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/AUTHORS @@ -0,0 +1,42 @@ +* LibVNCServer (C) 2001 Johannes E. Schindelin +is based on +* Original OSXvnc (C) 2001 Dan McGuirk , +which in turn is based on +* Original Xvnc (C) 1999 AT&T Laboratories Cambridge. + +Lots of improvements of this library are thanks to +* TightVNC (C) 2000-2003 Const Kaplinsky + +The ZRLE compression scheme is from +* RealVNC (James "Wez" Weatherall, who helped also with regions) + +The good folks from +* KRFB (I think it was Tim Jansen) +helped also a lot (some *big* bugs!). + +Karl Runge provides an x11vnc, which is a much, much improved version of my +original proof-of-concept. It really deserves to replace the old version, +as it is a state-of-the-art, fast and usable program by now! However, he +maintains it and improves it still in amazing ways! + +The file transfer protocol from TightVNC was implemented by Rohit Kumar. +This includes an implementation of RFB protocol version 3.7t. + +Occasional important patches were sent by (in order I found the names in my +archives and please don't beat me, if I forgot you, but just send me an +email!): Akira Hatakeyama, Karl J. Runge, Justin "Zippy" Dearing, +Oliver Mihatsch, Greg Sternberg, Werner Hofer, Giampiero Giancipoli, +Glenn Mabutt, Paul Kreiner, Erik Kunze, Mike Frysinger, Martin Waitz, +Mark McLoughlin, Paul Fox, Juan Jose Costello, Andre Leiadella, +Alberto Lusiani, Malvina Mazin, Dave Stuart, Rohit Kumar, Donald Dugger, +Steven Carr, Uwe Völker, Charles Coffing, Guillaume Rousse, +Alessandro Praduroux, Brad Hards, Timo Ketola, Christian Ehrlicher, +Noriaki Yamazaki, Ben Klopfenstein, Vic Lee, Christian Beier, +Alexander Dorokhine, Corentin Chary, Wouter Van Meir, George Kiagiadakis, +Joel Martin, Gernot Tenchio, William Roberts, Cristian Rodríguez, +George Fleury, Kan-Ru Chen, Steve Guo, Luca Stauble, Peter Watkins, +Kyle J. McKay, Mateus Cesar Groess, Philip Van Hoof and D. R. Commander. + +Probably I forgot quite a few people sending a patch here and there, which +really made a difference. Without those, some obscure bugs still would +be unfound. diff --git a/jni/vnc/LibVNCServer-0.9.9/CMakeLists.txt b/jni/vnc/LibVNCServer-0.9.9/CMakeLists.txt new file mode 100644 index 0000000..6d4a5f9 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/CMakeLists.txt @@ -0,0 +1,361 @@ +cmake_minimum_required(VERSION 2.6) + +project(LibVNCServer) +include(CheckFunctionExists) +include(CheckIncludeFile) +include(CheckTypeSize) +include(TestBigEndian) +include(CheckCSourceCompiles) +include(CheckCXXSourceCompiles) +include(CheckCSourceRuns) + +set(PACKAGE_NAME "LibVNCServer") +set(FULL_PACKAGE_NAME "LibVNCServer") +set(PACKAGE_VERSION "0.9.9") +set(PROJECT_BUGREPORT_PATH "http://sourceforge.net/projects/libvncserver") +set(CMAKE_C_FLAGS "-O2 -W -Wall -g") +set(LIBVNCSERVER_DIR ${CMAKE_SOURCE_DIR}/libvncserver) +set(COMMON_DIR ${CMAKE_SOURCE_DIR}/common) +set(LIBVNCCLIENT_DIR ${CMAKE_SOURCE_DIR}/libvncclient) +set(LIBVNCSRVTEST_DIR ${CMAKE_SOURCE_DIR}/examples) +set(LIBVNCCLITEST_DIR ${CMAKE_SOURCE_DIR}/client_examples) + + +include_directories(${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR} ${CMAKE_SOURCE_DIR}/libvncserver ${CMAKE_SOURCE_DIR}/common) + +find_package(ZLIB) +find_package(JPEG) +find_package(PNG) +find_package(SDL) +find_package(GnuTLS) +find_package(Threads) +find_package(X11) +find_package(OpenSSL) +find_library(LIBGCRYPT_LIBRARIES gcrypt) + +# Check whether the version of libjpeg we found was libjpeg-turbo and print a +# warning if not. +set(CMAKE_REQUIRED_LIBRARIES ${JPEG_LIBRARIES}) +set(CMAKE_REQUIRED_FLAGS -I${JPEG_INCLUDE_DIR}) + +set(JPEG_TEST_SOURCE "\n + #include \n + #include \n + int main(void) {\n + struct jpeg_compress_struct cinfo;\n + struct jpeg_error_mgr jerr;\n + cinfo.err=jpeg_std_error(&jerr);\n + jpeg_create_compress(&cinfo);\n + cinfo.input_components = 3;\n + jpeg_set_defaults(&cinfo);\n + cinfo.in_color_space = JCS_EXT_RGB;\n + jpeg_default_colorspace(&cinfo);\n + return 0;\n + }") + +if(CMAKE_CROSSCOMPILING) + check_c_source_compiles("${JPEG_TEST_SOURCE}" FOUND_LIBJPEG_TURBO) +else() + check_c_source_runs("${JPEG_TEST_SOURCE}" FOUND_LIBJPEG_TURBO) +endif() + +set(CMAKE_REQUIRED_LIBRARIES) +set(CMAKE_REQUIRED_FLAGS) +set(CMAKE_REQUIRED_DEFINITIONS) + +if(NOT FOUND_LIBJPEG_TURBO) + message(WARNING "*** The libjpeg library you are building against is not libjpeg-turbo. Performance will be reduced. You can obtain libjpeg-turbo from: https://sourceforge.net/projects/libjpeg-turbo/files/ ***") +endif() + +set(CMAKE_REQUIRED_LIBRARIES resolv) +check_function_exists(__b64_ntop HAVE_B64) + +if(Threads_FOUND) + option(TIGHTVNC_FILETRANSFER "Enable filetransfer" ON) +endif(Threads_FOUND) +if (HAVE_B64) +endif(HAVE_B64) +if(ZLIB_FOUND) + set(LIBVNCSERVER_HAVE_LIBZ 1) +endif(ZLIB_FOUND) +if(JPEG_FOUND) + set(LIBVNCSERVER_HAVE_LIBJPEG 1) +endif(JPEG_FOUND) +if(PNG_FOUND) + set(LIBVNCSERVER_HAVE_LIBPNG 1) +endif(PNG_FOUND) +option(LIBVNCSERVER_ALLOW24BPP "Allow 24 bpp" ON) + +if(GNUTLS_FOUND) + set(LIBVNCSERVER_WITH_CLIENT_TLS 1) + option(LIBVNCSERVER_WITH_WEBSOCKETS "Build with websockets support (gnutls)" ON) + set(WEBSOCKET_LIBRARIES -lresolv ${GNUTLS_LIBRARIES}) + set(WSSRCS ${LIBVNCSERVER_DIR}/rfbssl_gnutls ${LIBVNCSERVER_DIR}/rfbcrypto_gnutls) +elseif(OPENSSL_FOUND) + option(LIBVNCSERVER_WITH_WEBSOCKETS "Build with websockets support (openssl)" ON) + set(WEBSOCKET_LIBRARIES -lresolv ${OPENSSL_LIBRARIES}) + set(WSSRCS ${LIBVNCSERVER_DIR}/rfbssl_openssl ${LIBVNCSERVER_DIR}/rfbcrypto_openssl) +else() + option(LIBVNCSERVER_WITH_WEBSOCKETS "Build with websockets support (no ssl)" ON) + set(WEBSOCKET_LIBRARIES -lresolv) + set(WSSRCS ${LIBVNCSERVER_DIR}/rfbssl_none.c ${LIBVNCSERVER_DIR}/rfbcrypto_included.c ${COMMON_DIR}/md5.c ${COMMON_DIR}/sha1.c) +endif() + +if(LIBGCRYPT_LIBRARIES) + message(STATUS "Found libgcrypt: ${LIBGCRYPT_LIBRARIES}") + set(LIBVNCSERVER_WITH_CLIENT_GCRYPT 1) +endif(LIBGCRYPT_LIBRARIES) + + +check_include_file("fcntl.h" LIBVNCSERVER_HAVE_FCNTL_H) +check_include_file("netinet/in.h" LIBVNCSERVER_HAVE_NETINET_IN_H) +check_include_file("sys/socket.h" LIBVNCSERVER_HAVE_SYS_SOCKET_H) +check_include_file("sys/stat.h" LIBVNCSERVER_HAVE_SYS_STAT_H) +check_include_file("sys/time.h" LIBVNCSERVER_HAVE_SYS_TIME_H) +check_include_file("sys/types.h" LIBVNCSERVER_HAVE_SYS_TYPES_H) +check_include_file("sys/wait.h" LIBVNCSERVER_HAVE_SYS_WAIT_H) +check_include_file("unistd.h" LIBVNCSERVER_HAVE_UNISTD_H) + +# headers needed for check_type_size() +check_include_file("arpa/inet.h" HAVE_ARPA_INET_H) +check_include_file("stdint.h" HAVE_STDINT_H) +check_include_file("stddef.h" HAVE_STDDEF_H) +check_include_file("sys/types.h" HAVE_SYS_TYPES_H) + +check_function_exists(gettimeofday LIBVNCSERVER_HAVE_GETTIMEOFDAY) + +if(CMAKE_USE_PTHREADS_INIT) + set(LIBVNCSERVER_HAVE_LIBPTHREAD 1) +endif(CMAKE_USE_PTHREADS_INIT) +if(LIBVNCSERVER_HAVE_SYS_SOCKET_H) + # socklen_t + list(APPEND CMAKE_EXTRA_INCLUDE_FILES "sys/socket.h") +endif(LIBVNCSERVER_HAVE_SYS_SOCKET_H) +if(HAVE_ARPA_INET_H) + # in_addr_t + list(APPEND CMAKE_EXTRA_INCLUDE_FILES "arpa/inet.h") +endif(HAVE_ARPA_INET_H) + +check_type_size(pid_t LIBVNCSERVER_PID_T) +check_type_size(size_t LIBVNCSERVER_SIZE_T) +check_type_size(socklen_t LIBVNCSERVER_SOCKLEN_T) +check_type_size(in_addr_t LIBVNCSERVER_IN_ADDR_T) +if(NOT HAVE_LIBVNCSERVER_IN_ADDR_T) + set(LIBVNCSERVER_NEED_INADDR_T 1) +endif(NOT HAVE_LIBVNCSERVER_IN_ADDR_T) + +TEST_BIG_ENDIAN(LIBVNCSERVER_WORDS_BIGENDIAN) + +# TODO: +# LIBVNCSERVER_ENOENT_WORKAROUND +# inline + +configure_file(${CMAKE_SOURCE_DIR}/rfb/rfbconfig.h.cmake ${CMAKE_BINARY_DIR}/rfb/rfbconfig.h) +configure_file(${CMAKE_SOURCE_DIR}/rfb/rfbint.h.cmake ${CMAKE_BINARY_DIR}/rfb/rfbint.h) + +set(LIBVNCSERVER_SOURCES + ${LIBVNCSERVER_DIR}/main.c + ${LIBVNCSERVER_DIR}/rfbserver.c + ${LIBVNCSERVER_DIR}/rfbregion.c + ${LIBVNCSERVER_DIR}/auth.c + ${LIBVNCSERVER_DIR}/sockets.c + ${LIBVNCSERVER_DIR}/stats.c + ${LIBVNCSERVER_DIR}/corre.c + ${LIBVNCSERVER_DIR}/hextile.c + ${LIBVNCSERVER_DIR}/rre.c + ${LIBVNCSERVER_DIR}/translate.c + ${LIBVNCSERVER_DIR}/cutpaste.c + ${LIBVNCSERVER_DIR}/httpd.c + ${LIBVNCSERVER_DIR}/cursor.c + ${LIBVNCSERVER_DIR}/font.c + ${LIBVNCSERVER_DIR}/draw.c + ${LIBVNCSERVER_DIR}/selbox.c + ${COMMON_DIR}/d3des.c + ${COMMON_DIR}/vncauth.c + ${LIBVNCSERVER_DIR}/cargs.c + ${COMMON_DIR}/minilzo.c + ${LIBVNCSERVER_DIR}/ultra.c + ${LIBVNCSERVER_DIR}/scale.c +) + +set(LIBVNCCLIENT_SOURCES + ${LIBVNCCLIENT_DIR}/cursor.c + ${LIBVNCCLIENT_DIR}/listen.c + ${LIBVNCCLIENT_DIR}/rfbproto.c + ${LIBVNCCLIENT_DIR}/sockets.c + ${LIBVNCCLIENT_DIR}/vncviewer.c + ${COMMON_DIR}/minilzo.c +) + +if(GNUTLS_FOUND) + set(LIBVNCCLIENT_SOURCES + ${LIBVNCCLIENT_SOURCES} + ${LIBVNCCLIENT_DIR}/tls_gnutls.c + ) +elseif(OPENSSL_FOUND) + set(LIBVNCCLIENT_SOURCES + ${LIBVNCCLIENT_SOURCES} + ${LIBVNCCLIENT_DIR}/tls_openssl.c + ) +else() + set(LIBVNCCLIENT_SOURCES + ${LIBVNCCLIENT_SOURCES} + ${LIBVNCCLIENT_DIR}/tls_none.c + ) +endif() + +if(ZLIB_FOUND) + add_definitions(-DLIBVNCSERVER_HAVE_LIBZ) + include_directories(${ZLIB_INCLUDE_DIR}) + set(LIBVNCSERVER_SOURCES + ${LIBVNCSERVER_SOURCES} + ${LIBVNCSERVER_DIR}/zlib.c + ${LIBVNCSERVER_DIR}/zrle.c + ${LIBVNCSERVER_DIR}/zrleoutstream.c + ${LIBVNCSERVER_DIR}/zrlepalettehelper.c + ) +endif(ZLIB_FOUND) + +if(JPEG_FOUND) + add_definitions(-DLIBVNCSERVER_HAVE_LIBJPEG) + include_directories(${JPEG_INCLUDE_DIR}) + set(TIGHT_C ${LIBVNCSERVER_DIR}/tight.c ${COMMON_DIR}/turbojpeg.c) +endif(JPEG_FOUND) + +if(PNG_FOUND) + add_definitions(-DLIBVNCSERVER_HAVE_LIBPNG) + include_directories(${PNG_INCLUDE_DIR}) + set(TIGHT_C ${LIBVNCSERVER_DIR}/tight.c ${COMMON_DIR}/turbojpeg.c) +endif(PNG_FOUND) + +set(LIBVNCSERVER_SOURCES + ${LIBVNCSERVER_SOURCES} + ${TIGHT_C} +) + +if(TIGHTVNC_FILETRANSFER) + set(LIBVNCSERVER_SOURCES + ${LIBVNCSERVER_SOURCES} + ${LIBVNCSERVER_DIR}/tightvnc-filetransfer/rfbtightserver.c + ${LIBVNCSERVER_DIR}/tightvnc-filetransfer/handlefiletransferrequest.c + ${LIBVNCSERVER_DIR}/tightvnc-filetransfer/filetransfermsg.c + ${LIBVNCSERVER_DIR}/tightvnc-filetransfer/filelistinfo.c + ) +endif(TIGHTVNC_FILETRANSFER) + +if(LIBVNCSERVER_WITH_WEBSOCKETS) + add_definitions(-DLIBVNCSERVER_WITH_WEBSOCKETS) + set(LIBVNCSERVER_SOURCES + ${LIBVNCSERVER_SOURCES} + ${LIBVNCSERVER_DIR}/websockets.c + ${WSSRCS} + ) +endif(LIBVNCSERVER_WITH_WEBSOCKETS) + + +add_library(vncclient SHARED ${LIBVNCCLIENT_SOURCES}) +add_library(vncserver SHARED ${LIBVNCSERVER_SOURCES}) +if(WIN32) + set(ADDITIONAL_LIBS ws2_32) +endif(WIN32) + +target_link_libraries(vncclient + ${ADDITIONAL_LIBS} + ${ZLIB_LIBRARIES} + ${JPEG_LIBRARIES} +) +target_link_libraries(vncserver + ${ADDITIONAL_LIBS} + ${ZLIB_LIBRARIES} + ${JPEG_LIBRARIES} + ${PNG_LIBRARIES} + ${WEBSOCKET_LIBRARIES} +) + +SET_TARGET_PROPERTIES(vncclient vncserver + PROPERTIES SOVERSION "0.0.0" +) + +# tests +set(LIBVNCSERVER_TESTS + backchannel + camera + colourmaptest + example + fontsel + pnmshow + pnmshow24 + regiontest + rotate + simple + simple15 + storepasswd + vncev + ) + +if(Threads_FOUND) + set(LIBVNCSERVER_TESTS + ${LIBVNCSERVER_TESTS} + blooptest + ) +endif(Threads_FOUND) + +if(TIGHTVNC_FILETRANSFER) + set(LIBVNCSERVER_TESTS + ${LIBVNCSERVER_TESTS} + filetransfer + ) +endif(TIGHTVNC_FILETRANSFER) + +if(MACOS) + set(LIBVNCSERVER_TESTS + ${LIBVNCSERVER_TESTS} + mac + ) +endif(MACOS) + +set(LIBVNCCLIENT_TESTS + backchannel + ppmtest +) + +if(SDL_FOUND) + include_directories(${SDL_INCLUDE_DIR}) + set(LIBVNCCLIENT_TESTS + ${LIBVNCCLIENT_TESTS} + SDLvncviewer + ) + set(SDLvncviewer_EXTRA_SOURCES scrap.c) +endif(SDL_FOUND) + +if(HAVE_FFMPEG) + set(LIBVNCCLIENT_TESTS + ${LIBVNCCLIENT_TESTS} + vnc2mpg + ) +endif(HAVE_FFMPEG) + + +file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/examples) +foreach(test ${LIBVNCSERVER_TESTS}) + add_executable(examples/${test} ${LIBVNCSRVTEST_DIR}/${test}.c) + target_link_libraries(examples/${test} vncserver ${CMAKE_THREAD_LIBS_INIT}) +endforeach(test ${LIBVNCSERVER_TESTS}) + +file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/client_examples) +foreach(test ${LIBVNCCLIENT_TESTS}) + add_executable(client_examples/${test} ${LIBVNCCLITEST_DIR}/${test}.c ${LIBVNCCLITEST_DIR}/${${test}_EXTRA_SOURCES} ) + target_link_libraries(client_examples/${test} vncclient ${CMAKE_THREAD_LIBS_INIT} ${GNUTLS_LIBRARIES} ${X11_LIBRARIES} ${SDL_LIBRARY} ${FFMPEG_LIBRARIES}) +endforeach(test ${LIBVNCCLIENT_TESTS}) + +install_targets(/lib vncserver) +install_targets(/lib vncclient) +install_files(/include/rfb FILES + rfb/keysym.h + rfb/rfb.h + rfb/rfbclient.h + rfb/rfbconfig.h + rfb/rfbint.h + rfb/rfbproto.h + rfb/rfbregion.h +) diff --git a/jni/vnc/LibVNCServer-0.9.9/COPYING b/jni/vnc/LibVNCServer-0.9.9/COPYING new file mode 100644 index 0000000..a3f6b12 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/COPYING @@ -0,0 +1,340 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place - Suite 330, Boston, MA + 02111-1307, USA. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) 19yy + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19yy name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/jni/vnc/LibVNCServer-0.9.9/ChangeLog b/jni/vnc/LibVNCServer-0.9.9/ChangeLog new file mode 100644 index 0000000..13cde9f --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/ChangeLog @@ -0,0 +1,7760 @@ +2012-05-04 Christian Beier + + * configure.ac: Enable building DLLs with MinGW32. + +2012-05-04 Christian Beier + + * NEWS: Update NEWS for 0.9.9. + +2012-05-03 Christian Beier + + * libvncclient/rfbproto.c: LibVNCClient: #undef these types in case + it's WIN32. The various other headers include windows.h and the winsock headers + which give an error when SOCKET and socklen_t are already defined. + +2012-05-03 Christian Beier + + * rfb/rfb.h: LibVNCServer: Include ws2tcpip.h if it's available. Needed for the IPv6 stuff. + +2012-04-30 Christian Beier + + * libvncserver/Makefile.am: LibVNCServer: Prefer GnuTLS over OpenSSL + to be in sync with LibVNCClient. + +2012-04-30 Christian Beier + + * libvncserver/rfbserver.c: Some more libjpeg, libpng and zlib + related build fixes. + +2012-04-30 Christian Beier + + * configure.ac: Make PKG_CHECK_MODULES fail non-fatal. These check for optional modules. + +2012-04-30 Christian Beier + + * libvncserver/rfbserver.c, rfb/rfb.h: Only try to build TightPNG + stuff when libjpeg is available. TightPNG replaces the ZLIB stuff int Tight encoding with PNG. It + still uses JPEG rects as well. Theoretically, we could build + TightPNG with only libpng and libjpeg - without zlib - but libpng + depends on zlib, so this is kinda moot. + +2012-04-27 Christian Beier + + * test/Makefile.am: Only build libjpeg test programs if libjpeg is + actually available. + +2012-04-26 Christian Beier + + * CMakeLists.txt: Fix CMake build of LibVNCClient. + +2012-04-26 Christian Beier + + * libvncserver/rfbserver.c: Properly check return value. This also fixes a compiler warning. + +2012-04-26 Christian Beier + + * configure.ac: Fix build when no libjpeg is available. + +2012-04-26 Christian Beier + + * examples/android/Makefile.am, libvncserver/Makefile.am: Include + some more missing files for make dist. + +2012-04-25 Christian Beier + + * libvncserver/Makefile.am: Include missing files for make dist. + +2012-04-25 Christian Beier + + * libvncclient/Makefile.am: Fix libvncclient make dist. + +2012-04-25 Christian Beier + + * configure.ac: Better check for Linux build. + +2012-04-25 Christian Beier + + * vncterm/Makefile.am: Binaries that are to be installed should be + all lowercase. + +2012-04-25 Christian Beier + + * CMakeLists.txt, configure.ac: Bump version to 0.9.9. + +2012-04-25 Christian Beier + + * common/turbojpeg.c, libvncserver/rfbserver.c, + libvncserver/websockets.c, test/tjbench.c: Fix some compiler + warnings thrown with newer gcc. + +2012-04-25 Christian Beier + + * test/Makefile.am: Fix turbojpeg tests compilation. + +2012-04-25 DRC + + * common/turbojpeg.c: Fix compilation with some libjpeg + distributions. + +2012-04-22 Monkey + + * libvncclient/rfbproto.c: Added support for UltraVNC Single Click + as originally proposed by Noobius (Boobius) on 6/1/11. Original thread: + + http://sourceforge.net/tracker/?func=detail&aid=3310255&group_id=32584&atid=405860 + +2012-04-15 Christian Beier + + * AUTHORS: Add Philip to AUTHORS. + +2012-04-15 Christian Beier + + * libvncclient/tls_none.c: LibVNCClient: Fix build with no SSL/TLS + library available. + +2012-04-15 Christian Beier + + * libvncclient/tls_openssl.c: LibVNCClient: properly free the + openssl session stuff on shutdown. + +2012-04-15 Christian Beier + + * libvncclient/rfbproto.c, libvncclient/sockets.c, + libvncclient/tls_gnutls.c, libvncclient/vncviewer.c, + rfb/rfbclient.h: LibVNCClient: Remove all those WITH_CLIENT_TLS + #ifdefs and move GnuTLS specific functionality into tls_gnutls.c. + +2012-04-14 Christian Beier + + * configure.ac: Unify GnuTLS vs OpenSSL build systems stuff between + libvncclient and libvncserver. + +2012-04-14 Christian Beier + + * libvncclient/Makefile.am, libvncclient/tls.c, + libvncclient/tls_gnutls.c, libvncclient/tls_none.c, + libvncclient/tls_openssl.c: Add the OpenSSL libvncclient TLS version + to the build system. + +2012-04-12 Christian Beier + + * webclients/novnc/LICENSE.txt, webclients/novnc/README.md, + webclients/novnc/include/base.css, + webclients/novnc/include/base64.js, + webclients/novnc/include/display.js, + webclients/novnc/include/input.js, + webclients/novnc/include/jsunzip.js, + webclients/novnc/include/rfb.js, webclients/novnc/include/ui.js, + webclients/novnc/include/util.js, webclients/novnc/include/vnc.js, + webclients/novnc/include/websock.js, + webclients/novnc/include/webutil.js, webclients/novnc/vnc.html, + webclients/novnc/vnc_auto.html: Update our copy of noVNC. Bugfixes and support for tight encoding with zlib. + +2012-04-12 Christian Beier + + * libvncserver/tight.c: Make TurboVNC compress level 3 actually + work. + +2012-04-09 DRC + + * common/turbojpeg.c: Fix memory leak in TurboVNC Note that the memory leak was only occurring with the colorspace + emulation code, which is only active when using regular libjpeg (not + libjpeg-turbo.) Diagnosed by Christian Beier, using valgrind. Signed-off-by: Johannes Schindelin + +2012-04-02 Christian Beier + + * libvncclient/listen.c, libvncclient/sockets.c, + libvncserver/httpd.c, libvncserver/sockets.c: IPv6 support for + LibVNCServer, part four: add copyright notices to files with + non-trivial changes. + +2012-03-29 Johannes Schindelin + + * client_examples/SDLvncviewer.c: SDLvncviewer: map Apple/Windows + keys correctly Signed-off-by: Johannes Schindelin + +2012-03-29 Johannes Schindelin + + * .gitignore: gitignore the compiled gtkvncclient Signed-off-by: Johannes Schindelin + +2012-03-29 Johannes Schindelin + + * client_examples/SDLvncviewer.c: SDLvncviewer: fix the SDL_KEYUP + issue Keys got stuck because unicode is 0 upon SDL_KEYUP events, even if + the same key event sets unicode correctly in SDL_KEYDOWN events. Work around that for the common case (ASCII) using the fact that + both SDL and X11 keysyms were created with ASCII compatibility in + mind. So as long as we type ASCII symbols, we can map things + trivially. Signed-off-by: Johannes Schindelin + +2012-03-23 DRC + + * CMakeLists.txt: Extend support for the new TurboVNC encoder to the + CMake build system + +2012-03-25 DRC + + * common/turbojpeg.c, common/turbojpeg.h, configure.ac, + libvncserver/Makefile.am, libvncserver/rfbserver.c, + libvncserver/tight.c, libvncserver/turbo.c, rfb/rfb.h, + rfb/rfbproto.h, test/Makefile.am, test/bmp.c, test/bmp.h, + test/tjbench.c, test/tjunittest.c, test/tjutil.c, test/tjutil.h: + Replace TightVNC encoder with TurboVNC encoder. This patch is the + result of further research and discussion that revealed the + following: -- TightPng encoding and the rfbTightNoZlib extension need not + conflict. Since TightPng is a separate encoding type, not supported + by TurboVNC-compatible viewers, then the rfbTightNoZlib extension + can be used solely whenever the encoding type is Tight and disabled + with the encoding type is TightPng. -- In the TightVNC encoder, compression levels above 5 are basically + useless. On the set of 20 low-level datasets that were used to + design the TurboVNC encoder (these include the eight 2D application + captures that were also used when designing the TightVNC encoder, as + well as 12 3D application captures provided by the VirtualGL + Project-- see + http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf), + moving from Compression Level (CL) 5 to CL 9 in the TightVNC + encoder did not increase the compression ratio of any datasets more + than 10%, and the compression ratio only increased by more than 5% + on four of them. The compression ratio actually decreased a few + percent on five of them. In exchange for this paltry increase in + compression ratio, the CPU usage, on average, went up by a factor of + 5. Thus, for all intents and purposes, TightVNC CL 5 provides the + "best useful compression" for that encoder. -- TurboVNC's best compression level (CL 2) compresses 3D and video + workloads significantly more "tightly" than TightVNC CL 5 (~70% + better, in the aggregate) but does not quite achieve the same level + of compression with 2D workloads (~20% worse, in the aggregate.) + This decrease in compression ratio may or may not be noticeable, + since many of the datasets it affects are not performance-critical + (such as the console output of a compilation, etc.) However, for + peace of mind, it was still desirable to have a mode that compressed + with equal "tightness" to TightVNC CL 5, since we proposed to + replace that encoder entirely. -- A new mode was discovered in the TurboVNC encoder that produces, + in the aggregate, similar compression ratios on 2D datasets as + TightVNC CL 5. That new mode involves using Zlib level 7 (the same + level used by TightVNC CL 5) but setting the "palette threshold" to + 256, so that indexed color encoding is used whenever possible. This + mode reduces bandwidth only marginally (typically 10-20%) relative + to TurboVNC CL 2 on low-color workloads, in exchange for nearly + doubling CPU usage, and it does not benefit high-color workloads at + all (since those are usually encoded with JPEG.) However, it + provides a means of reproducing the same "tightness" as the TightVNC encoder on 2D workloads without sacrificing any compression for + 3D/video workloads, and without using any more CPU time than + necessary. -- The TurboVNC encoder still performs as well or better than the + TightVNC encoder when plain libjpeg is used instead of + libjpeg-turbo. Specific notes follow: common/turbojpeg.c common/turbojpeg.h: Added code to emulate the + libjpeg-turbo colorspace extensions, so that the TurboJPEG wrapper + can be used with plain libjpeg as well. This required updating the + TurboJPEG wrapper to the latest code from libjpeg-turbo 1.2.0, + mainly because the TurboJPEG 1.2 API handles pixel formats in a much + cleaner way, which made the conversion code easier to write. It + also eases the maintenance to have the wrapper synced as much as + possible with the upstream code base (so I can merge any relevant + bug fixes that are discovered upstream.) The libvncserver version of + the TurboJPEG wrapper is a "lite" version, containing only the JPEG + compression/decompression code and not the lossless transform, YUV + encoding/decoding, and dynamic buffer allocation features from + TurboJPEG 1.2. configure.ac: Removed the --with-turbovnc option. configure still + checks for the presence of libjpeg-turbo, but only for the purposes + of printing a performance warning if it isn't available. rfb/rfb.h: Fix a bug introduced with the initial TurboVNC encoder + patch. We cannot use tightQualityLevel for the TurboVNC 1-100 + quality level, because tightQualityLevel is also used by ZRLE. + Thus, a new parameter (turboQualityLevel) was created. rfb/rfbproto.h: Remove TurboVNC-specific #ifdefs and language libvncserver/rfbserver.c: Remove TurboVNC-specific #ifdefs. Fix + afore-mentioned tightQualityLevel bug. libvncserver/tight.c: Replaced the TightVNC encoder with the + TurboVNC encoder. Relative to the initial TurboVNC encoder patch, + this patch also: -- Adds TightPng support to the TurboVNC encoder -- + Adds the afore-mentioned low-bandwidth mode, which is mapped + externally to Compression Level 9 test/*: Included TJUnitTest (a regression test for the TurboJPEG + wrapper) as well as TJBench (a benchmark for same.) These are + useful for ensuring that the wrapper still functions correctly and + performantly if it needs to be modified for whatever reason. Both + of these programs are derived from libjpeg-turbo 1.2.0. As with the + TurboJPEG wrapper, they do not contain the more advanced features of + TurboJPEG 1.2, such as YUV encoding/decoding and lossless + transforms. + +2012-03-15 Christian Beier + + * AUTHORS: Add DRC to AUTHORS. + +2012-03-15 Christian Beier + + * rfb/rfb.h: Move tightsubsamplevel member to the end of rfbClient + struct. Try to not break ABI between releases. Even if the code gets ugly... + +2012-03-10 DRC + + * x11vnc/Makefile.am: Fix the build of x11vnc when an out-of-tree + build directory is used + +2012-03-10 DRC + + * libvncserver/rfbserver.c: Fix an issue that affects the existing + Tight encoder as well as the newly-implemented Turbo encoder. The issue is that, when using the current libvncserver source, it is + impossible to disable Tight JPEG encoding. The way Tight/Turbo + viewers disable JPEG encoding is by simply not sending the Tight + quality value, causing the server to use the default value of -1. + Thus, cl->tightQualityLevel has to be set to -1 prior to processing + the encodings message for this mechanism to work. Similarly, it is + not guaranteed that the compress level will be set in the encodings + message, so it is set to a default value prior to processing the + message. + +2012-03-10 DRC + + * common/turbojpeg.c, common/turbojpeg.h, configure.ac, + libvncserver/Makefile.am, libvncserver/rfbserver.c, + libvncserver/turbo.c, rfb/rfb.h, rfb/rfbproto.h: Add TurboVNC + encoding support. TurboVNC is a variant of TightVNC that uses the same client/server + protocol (RFB version 3.8t), and thus it is fully cross-compatible + with TightVNC and TigerVNC (with one exception, which is noted + below.) Both the TightVNC and TurboVNC encoders analyze each + rectangle, pick out regions of solid color to send separately, and + send the remaining subrectangles using mono, indexed color, JPEG, or + raw encoding, depending on the number of colors in the subrectangle. + However, TurboVNC uses a fundamentally different selection algorithm + to determine the appropriate subencoding to use for each + subrectangle. Thus, while it sends a protocol stream that can be + decoded by any TightVNC-compatible viewer, the mix of subencoding + types in this protocol stream will be different from those generated + by a TightVNC server. The research that led to TurboVNC is described in the following + report: + http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf. In + summary: 20 RFB captures, representing "common" 2D and 3D + application workloads (the 3D workloads were run using VirtualGL), + were studied using the TightVNC encoder in isolation. Some of the + analysis features in the TightVNC encoder, such as smoothness + detection, were found to generate a lot of CPU usage with little or + no benefit in compression, so those features were disabled. JPEG + encoding was accelerated using libjpeg-turbo (which achieves a 2-4x + speedup over plain libjpeg on modern x86 or ARM processors.) + Finally, the "palette threshold" (minimum number of colors that the + subrectangle must have before it is compressed using JPEG or raw) + was adjusted to account for the fact that JPEG encoding is now quite + a bit faster (meaning that we can now use it more without a CPU + penalty.) TurboVNC has additional optimizations, such as the + ability to count colors and encode JPEG images directly from the + framebuffer without first translating the pixels into RGB. The + TurboVNC encoder compares quite favorably in terms of compression + ratio with TightVNC and generally encodes a great deal faster (often + an order of magnitude or more.) The version of the TurboVNC encoder included in this patch is + roughly equivalent to the one found in version 0.6 of the Unix + TurboVNC Server, with a few minor patches integrated from TurboVNC + 1.1. TurboVNC 1.0 added multi-threading capabilities, which can be + added in later if desired (at the expense of making libvncserver + depend on libpthread.) Because TurboVNC uses a fundamentally different mix of subencodings + than TightVNC, because it uses the identical protocol (and thus a + viewer really has no idea whether it's talking to a TightVNC or + TurboVNC server), and because it doesn't support rfbTightPng (and in + fact conflicts with it-- see below), the TurboVNC and TightVNC + encoders cannot be enabled simultaneously. Compatibility: In *most* cases, a TurboVNC-enabled viewer is fully compatible with + a TightVNC server, and vice versa. TurboVNC supports + pseudo-encodings for specifying a fine-grained (1-100) quality scale + and specifying chrominance subsampling. If a TurboVNC viewer sends + those to a TightVNC server, then the TightVNC server ignores them, + so the TurboVNC viewer also sends the quality on a 0-9 scale that + the TightVNC server can understand. Similarly, the TurboVNC server + checks first for fine-grained quality and subsampling + pseudo-encodings from the viewer, and failing to receive those, it + then checks for the TightVNC 0-9 quality pseudo-encoding. There is one case in which the two systems are not compatible, and + that is when a TightVNC or TigerVNC viewer requests compression + level 0 without JPEG from a TurboVNC server. For performance + reasons, this causes the TurboVNC server to send images directly to + the viewer, bypassing Zlib. When the TurboVNC server does this, it + also sets bits 7-4 in the compression control byte to rfbTightNoZlib + (0x0A), which is unfortunately the same value as rfbTightPng. Older + TightVNC viewers that don't handle PNG will assume that the stream + is uncompressed but still encapsulated in a Zlib structure, whereas + newer PNG-supporting TightVNC viewers will assume that the stream is + PNG. In either case, the viewer will probably crash. Since most + VNC viewers don't expose compression level 0 in the GUI, this is a + relatively rare situation. Description of changes: configure.ac -- Added support for libjpeg-turbo. If passed an + argument of --with-turbovnc, configure will now run (or, if cross-compiling, just link) a test program that determines + whether the libjpeg library being used is libjpeg-turbo. + libjpeg-turbo must be used when building the TurboVNC encoder, + because the TurboVNC encoder relies on the libjpeg-turbo + colorspace extensions in order to compress images directly out of + the framebuffer (which may be, for instance, BGRA rather than RGB.) + libjpeg-turbo can optionally be used with the TightVNC encoder as + well, but the speedup will only be marginal (the report linked above + explains why in more detail, but basically it's because of Amdahl's + Law. The TightVNC encoder was designed with the assumption that + JPEG had a very high CPU cost, and thus JPEG is used only + sparingly.) -- Added a new configure variable, JPEG_LDFLAGS. This + is necessitated by the fact that libjpeg-turbo often distributes + libjpeg.a and libjpeg.so in /opt/libjpeg-turbo/lib32 or + /opt/libjpeg-turbo/lib64, and many people prefer to statically + link with it. Thus, more flexibility is needed than is provided by + --with-jpeg. If JPEG_LDFLAGS is specified, then it overrides the + changes to LDFLAGS enacted by --with-jpeg (but --with-jpeg is + still used to set the include path.) The addition of JPEG_LDFLAGS + necessitated replacing AC_CHECK_LIB with AC_LINK_IFELSE (because + AC_CHECK_LIB automatically sets LIBS to -ljpeg, which is not what we + want if we're, for instance, linking statically with libjpeg-turbo.) + -- configure does not check for PNG support if TurboVNC encoding is + enabled. This prevents the rfbSendRectEncodingTightPng() function + from being compiled in, since the TurboVNC encoder doesn't (and + can't) support it. common/turbojpeg.c, common/turbojpeg.h -- TurboJPEG is a simple API + used to compress and decompress JPEG images in memory. It was + originally implemented because it was desirable to use different + types of underlying technologies to compress JPEG on different + platforms (mediaLib on SPARC, Quicktime on PPC Macs, Intel + Performance Primitives, etc.) These days, however, libjpeg-turbo + is the only underlying technology used by TurboVNC, so TurboJPEG's + purpose is largely just code simplicity and flexibility. Thus, + since there is no real need for libvncserver to use any technology + other than libjpeg-turbo for compressing JPEG, the TurboJPEG wrapper + for libjpeg-turbo has been included in-tree so that libvncserver can + be directly linked with libjpeg-turbo. This is convenient because + many modern Linux distros (Fedora, Ubuntu, etc.) now ship + libjpeg-turbo as their default libjpeg library. libvncserver/rfbserver.c -- Added logic to check for the TurboVNC + fine-grained quality level and subsampling encodings and to map + Tight (0-9) quality levels to appropriate fine-grained quality level + and subsampling values if communicating with a TightVNC/TigerVNC + viewer. libvncserver/turbo.c -- TurboVNC encoder (compiled instead of + libvncserver/tight.c) rfb/rfb.h -- Added support for the TurboVNC subsampling level rfb/rfbproto.h -- Added constants for the TurboVNC fine quality + level and subsampling encodings as well as the rfbTightNoZlib + constant and notes on its usage. + +2012-03-10 Christian Beier + + * client_examples/SDLvncviewer.c, libvncclient/listen.c, + libvncclient/sockets.c, libvncclient/vncviewer.c, + libvncserver/sockets.c, rfb/rfbclient.h: IPv6 support for + LibVNCServer, part three: make reverse connections IPv6-capable. Besided making libvncserver reverseVNC IPv6-aware, this introduces + some changes on the client side as well to make clients listen on + IPv6 sockets, too. Like the server side, this also uses a + separate-socket approach. + +2012-03-10 Christian Beier + + * libvncserver/sockets.c: IPv6 support for LibVNCServer, part + onepointseven: Plug a memleak. We have to properly free the addrinfo struct when jumping out of the + function. + +2012-03-09 Christian Beier + + * webclients/index.vnc: IPv6 support for LibVNCServer, part + twopointone: properly surround IPv6 addresses with [] for noVNC URL. Some browsers omit the square brackets in + document.location.hostname, so add them if missing. + +2012-02-27 Christian Beier + + * libvncserver/cargs.c, libvncserver/httpd.c, libvncserver/main.c, + rfb/rfb.h: IPv6 support for LibVNCServer, part two: Let the http + server listen on IPv6, too. As done with the RFB sockets, this uses a separate-socket approach + as well. + +2012-02-27 Christian Beier + + * libvncserver/main.c: IPv6 support for LibVNCServer, part + onepointsix: fix a small logic error. Without this, we would have gotten a stale IPv4 socket in a race + condition. + +2012-02-27 Christian Beier + + * libvncserver/rfbserver.c, libvncserver/sockets.c: IPv6 support for + LibVNCServer, part onepointfive: Fix compilation with IPv6 missing. There was an oversight that crept in... + +2012-02-20 Christian Beier + + * libvncserver/cargs.c, libvncserver/main.c, + libvncserver/rfbserver.c, libvncserver/sockets.c, rfb/rfb.h: IPv6 + support for LibVNCServer, part one: accept IPv4 and IPv6 + connections. This uses a separate-socket approach since there are systems that do + not support dual binding sockets under *any* circumstances, for + instance OpenBSD. Using separate sockets for IPv4 and IPv6 is thus + more portable than having a v6 socket handle v4 connections as well. Signed-off-by: Christian Beier + +2012-02-11 Mateus Cesar Groess + + * AUTHORS, client_examples/Makefile.am, + client_examples/gtkvncviewer.c, configure.ac: Here is a port of + SDLvncviewer to GTK+2. I think it may encourage people to implement more features for the + viewer, because a GTK GUI seems to be easier to implement than a SDL + one (and it is more integrated with the major Linux Desktops out + there). Signed-off-by: Christian Beier + +2012-02-11 Christian Beier + + * AUTHORS: Update AUTHORS. + +2012-02-10 Kyle J. McKay + + * libvncserver/auth.c, libvncserver/rfbserver.c, rfb/rfb.h: Support + Mac OS X vnc client with no password Support connections from the Mac OS X built-in VNC client to + LibVNCServers running with no password and advertising a server + version of 3.7 or greater. + +2012-02-04 Johannes Schindelin + + * AUTHORS: Add Luca to the AUTHORS Signed-off-by: Johannes Schindelin + +2012-02-04 Luca Stauble + + * libvncclient/listen.c, libvncclient/sockets.c, + libvncclient/vncviewer.c, rfb/rfbclient.h: Add an optional parameter + to specify the ip address for reverse connections For security reasons, it can be important to limit which IP + addresses a LibVNCClient-based client should listen for reverse + connections. This commit adds that option. To preserve binary backwards-compatibility, the field was added to + the end of the rfbclient struct, and the function ListenAtTcpPort + retains its signature (but calls the new ListenAtTcpPortAndAddress). [jes: shortened the commit subject, added a longer explanation in + the commit body and adjusted style] Signed-off-by: Luca Stauble Signed-off-by: + Johannes Schindelin + +2012-01-12 Gernot Tenchio + + * libvncserver/websockets.c: websockets: removed debug message + +2012-01-12 Gernot Tenchio + + * libvncserver/websockets.c: websockets: restore errno after logging + an error + +2012-01-12 Gernot Tenchio + + * CMakeLists.txt: cmake: adapted to latest websocket crypto changes + +2011-12-15 Christian Beier + + * rfb/rfbclient.h: Small changes to LibNVCClient doxygen + documentation. + +2011-12-01 Christian Beier + + * libvncserver/Makefile.am: Fix build error when libpng is + available, but libjpeg is not. The png stuff in tight.c depends on code in tight.c that uses + libjpeg features. We could probably seperate that, but for now the + dependency for 'tight' goes: PNG depends on JPEG depends on ZLIB. This is reflected in Makefile.am now. NB: Building tight.c with JPEG but without PNG is still possible, but nor the other way around. + +2011-12-01 Christian Beier + + * configure.ac: Use AM_SILENT_RULES only when it's actually + available. Otherwise building breaks with older make versions. Happens on OS X + 10.6 for instance. + +2011-11-09 Christian Beier + + * configure.ac, webclients/Makefile.am, webclients/index.vnc, + webclients/java-applet/Makefile.am, + webclients/java-applet/javaviewer.pseudo_proxy.patch, + webclients/java-applet/ssl/Makefile.am, + webclients/java-applet/ssl/README, + webclients/java-applet/ssl/index.vnc, + webclients/java-applet/ssl/onetimekey, + webclients/java-applet/ssl/proxy.vnc, + webclients/java-applet/ssl/ss_vncviewer, + webclients/java-applet/ssl/tightvnc-1.3dev7_javasrc-vncviewer-curso + r-colors+no-tab-traversal.patch, + webclients/java-applet/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.p + atch, webclients/java-applet/ssl/ultra.vnc, + webclients/java-applet/ssl/ultraproxy.vnc, + webclients/java-applet/ssl/ultrasigned.vnc, + webclients/java-applet/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, + webclients/javaviewer.pseudo_proxy.patch, + webclients/ssl/Makefile.am, webclients/ssl/README, + webclients/ssl/index.vnc, webclients/ssl/onetimekey, + webclients/ssl/proxy.vnc, webclients/ssl/ss_vncviewer, + webclients/ssl/tightvnc-1.3dev7_javasrc-vncviewer-cursor-colors+no- + tab-traversal.patch, + webclients/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + webclients/ssl/ultra.vnc, webclients/ssl/ultraproxy.vnc, + webclients/ssl/ultrasigned.vnc, + webclients/ssl/ultravnc-102-JavaViewer-ssl-etc.patch: Move the java + stuff into webclients/java-applet. + +2011-11-09 Christian Beier + + * LibVNCServer.spec.in, Makefile.am, README, classes/Makefile.am, + classes/index.vnc, classes/javaviewer.pseudo_proxy.patch, + classes/novnc/LICENSE.txt, classes/novnc/README.md, + classes/novnc/favicon.ico, classes/novnc/include/base.css, + classes/novnc/include/base64.js, classes/novnc/include/black.css, + classes/novnc/include/blue.css, classes/novnc/include/des.js, + classes/novnc/include/display.js, classes/novnc/include/input.js, + classes/novnc/include/logo.js, classes/novnc/include/playback.js, + classes/novnc/include/rfb.js, classes/novnc/include/ui.js, + classes/novnc/include/util.js, classes/novnc/include/vnc.js, + classes/novnc/include/web-socket-js/README.txt, + classes/novnc/include/web-socket-js/swfobject.js, + classes/novnc/include/web-socket-js/web_socket.js, + classes/novnc/include/websock.js, classes/novnc/include/webutil.js, + classes/novnc/vnc.html, classes/novnc/vnc_auto.html, + classes/ssl/Makefile.am, classes/ssl/README, classes/ssl/index.vnc, + classes/ssl/onetimekey, classes/ssl/proxy.vnc, + classes/ssl/ss_vncviewer, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-cursor-colors+no-tab + -traversal.patch, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + classes/ssl/ultra.vnc, classes/ssl/ultraproxy.vnc, + classes/ssl/ultrasigned.vnc, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, configure.ac, + examples/example.c, examples/pnmshow.c, examples/pnmshow24.c, + rfb/rfb.h, webclients/Makefile.am, webclients/index.vnc, + webclients/javaviewer.pseudo_proxy.patch, + webclients/novnc/LICENSE.txt, webclients/novnc/README.md, + webclients/novnc/favicon.ico, webclients/novnc/include/base.css, + webclients/novnc/include/base64.js, + webclients/novnc/include/black.css, + webclients/novnc/include/blue.css, webclients/novnc/include/des.js, + webclients/novnc/include/display.js, + webclients/novnc/include/input.js, + webclients/novnc/include/logo.js, + webclients/novnc/include/playback.js, + webclients/novnc/include/rfb.js, webclients/novnc/include/ui.js, + webclients/novnc/include/util.js, webclients/novnc/include/vnc.js, + webclients/novnc/include/web-socket-js/README.txt, + webclients/novnc/include/web-socket-js/swfobject.js, + webclients/novnc/include/web-socket-js/web_socket.js, + webclients/novnc/include/websock.js, + webclients/novnc/include/webutil.js, webclients/novnc/vnc.html, + webclients/novnc/vnc_auto.html, webclients/ssl/Makefile.am, + webclients/ssl/README, webclients/ssl/index.vnc, + webclients/ssl/onetimekey, webclients/ssl/proxy.vnc, + webclients/ssl/ss_vncviewer, + webclients/ssl/tightvnc-1.3dev7_javasrc-vncviewer-cursor-colors+no- + tab-traversal.patch, + webclients/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + webclients/ssl/ultra.vnc, webclients/ssl/ultraproxy.vnc, + webclients/ssl/ultrasigned.vnc, + webclients/ssl/ultravnc-102-JavaViewer-ssl-etc.patch: Rename + 'classes' dir to 'webclients'. + +2011-11-09 Christian Beier + + * classes/index.vnc, libvncserver/httpd.c: novnc client: use the + client's notion about the server hostname instead of what the server + thinks. + +2011-11-09 Christian Beier + + * classes/index.vnc: Fix tiny typo. + +2011-11-09 Christian Beier + + * NEWS: Add 0.9.8.2 NEWS entry. + +2011-11-09 Christian Beier + + * libvncclient/rfbproto.c: When GetCredential() callback is not set, + don't use authentications requiring it. The auth methods that employ Getcredential() will only be used if + the client's GetCredential callback is actually set. + +2011-10-12 Christian Beier + + * ChangeLog: Update ChangeLog for 0.9.8.1. + +2011-10-12 Christian Beier + + * CMakeLists.txt, NEWS, configure.ac: Update version number in + autotools && cmake, NEWS entry. + +2011-10-26 Peter Watkins + + * rfb/rfbclient.h: Added comments. + +2011-10-26 Christian Beier + + * libvncserver/rfbserver.c: Fix deadlock in threaded mode when using + nested rfbClientIteratorNext() calls. Lengthy explanation follows... First, the scenario before this patch: We have three clients 1,2,3 connected. The main thread loops through + them using rfbClientIteratorNext() (loop L1) and is currently at + client 2 i.e. client 2's cl_2->refCount is 1. At this point we need + to loop again through the clients, with cl_2->refCount == 1, i.e. do + a loop L2 nested within loop L1. BUT: Now client 2 disconnects, it's clientInput thread terminates + its clientOutput thread and calls rfbClientConnectionGone(). This + LOCKs clientListMutex and WAITs for cl_2->refCount to become 0. This + means this thread waits for the main thread to release cl_2. + Waiting, with clientListMutex LOCKed! Meanwhile, the main thread is about to begin the inner + rfbClientIteratorNext() loop L2. The first call to + rfbClientIteratorNext() LOCKs clientListMutex. BAAM. This mutex is + locked by cl2's clientInput thread and is only released when + cl_2->refCount becomes 0. The main thread would decrement + cl_2->refCount when it would continue with loop L1. But it's waiting + for cl2's clientInput thread to release clientListMutex. Which never + happens since this one's waiting for the main thread to decrement + cl_2->refCount. DEADLOCK. Now, situation with this patch: Same as above, but when client 2 disconnects it's clientInput thread + rfbClientConnectionGone(). This again LOCKs clientListMutex, removes + cl_2 from the linked list and UNLOCKS clientListMutex. The WAIT for + cl_2->refCount to become 0 is _after_ that. Waiting, with + clientListMutex UNLOCKed! Therefore, the main thread can continue, do the inner loop L2 (now + only looping through 1,3 - 2 was removed from the linked list) and + continue with loop L1, finally decrementing cl_2->refCount, allowing + cl2's clientInput thread to continue and terminate. The resources + held by cl2 are not free()'d by rfbClientConnectionGone until + cl2->refCount becomes 0, i.e. loop L1 has released cl2. + +2011-10-16 Johannes Schindelin + + * AUTHORS: Update AUTHORS Signed-off-by: Johannes Schindelin + +2011-10-16 George Fleury + + * libvncserver/rfbserver.c: Fix memory leak I was debbuging some code tonight and i found a pointer that is not + been freed, so i think there is maybe a memory leak, so it is... there is the malloc caller reverse order: ( malloc cl->statEncList ) <- rfbStatLookupEncoding <- rfbStatRecordEncodingSent <- rfbSendCursorPos <- rfbSendFramebufferUpdate <- rfbProcessEvents I didnt look the whole libvncserver api, but i am using + rfbReverseConnection with rfbProcessEvents, and then when the client + connection dies, i am calling a rfbShutdownServer and + rfbScreenCleanup, but the malloc at rfbStatLookupEncoding isnt been + freed. So to free the stats i added a rfbResetStats(cl) after + rfbPrintStats(cl) at rfbClientConnectionGone in rfbserver.c before + free the cl pointer. (at rfbserver.c line 555). And this, obviously, + is correcting the memory leak. Signed-off-by: Johannes Schindelin + +2011-10-08 Johannes Schindelin + + * rfb/rfbclient.h: Hopefully fix the crash when updating from 0.9.7 + or earlier For backwards-compatibility reasons, we can only add struct members + to the end. That way, existing callers still can use newer + libraries, as the structs are always allocated by the library (and + therefore guaranteed to have the correct size) and still rely on the + same position of the parts the callers know about. Reported by Luca Falavigna. Signed-off-by: Johannes Schindelin + +2011-10-09 Johannes Schindelin + + * client_examples/SDLvncviewer.c: SDLvncviewer: make it resizable by + default I got annoyed having to specify -resizable all the time; I never use + it in another mode anymore, since I am on a netbook. The option -no-resizable was added to be able to switch off that + feature. Signed-off-by: Johannes Schindelin + +2011-10-06 Christian Beier + + * libvncserver/httpd.c: httpd: fix sending of binary data such as + images. We do this simply by omitting the content-type and let the browser + decide upon the mime-type of the sent file. Only exception is + 'index.vnc', where we do set the content-type since some browsers + fail to detect it's html when it's ending in '.vnc' Also, remove superfluous #defines. We close the connection always. + +2011-10-06 Christian Beier + + * classes/index.vnc: Fix typo && use proper website. + +2011-10-04 Christian Beier + + * classes/index.vnc, classes/novnc/LICENSE.txt, + classes/novnc/README.md, classes/novnc/favicon.ico, + classes/novnc/include/base.css, classes/novnc/include/base64.js, + classes/novnc/include/black.css, classes/novnc/include/blue.css, + classes/novnc/include/des.js, classes/novnc/include/display.js, + classes/novnc/include/input.js, classes/novnc/include/logo.js, + classes/novnc/include/playback.js, classes/novnc/include/rfb.js, + classes/novnc/include/ui.js, classes/novnc/include/util.js, + classes/novnc/include/vnc.js, + classes/novnc/include/web-socket-js/README.txt, + classes/novnc/include/web-socket-js/swfobject.js, + classes/novnc/include/web-socket-js/web_socket.js, + classes/novnc/include/websock.js, classes/novnc/include/webutil.js, + classes/novnc/vnc.html, classes/novnc/vnc_auto.html, + libvncserver/httpd.c: Add noVNC HTML5 client connect possibility to + our http server. Pure JavaScript, no Java plugin required anymore! (But a recent + browser...) + +2011-10-04 Christian Beier + + * configure.ac: This build warning is a libvncserver one, not for + x11vnc. Also, make it warn more generally when no known encryption lib is + available. + +2011-09-21 Gernot Tenchio + + * common/md5.c: md5: forced to use function names with leading + underscores Commented out the surrounding '#ifdef _LIBC' to build md5.o with + leading underscores. This is required to match the prototypes + defined in md5.h. + +2011-09-20 Gernot Tenchio + + * libvncserver/rfbcrypto_included.c: rfbcrypto_included: fix c&p + errors + +2011-09-20 Gernot Tenchio + + * libvncserver/rfbcrypto_polarssl.c: rfbcrypto_polarssl: it was way + to late last night... + +2011-09-18 Gernot Tenchio + + * libvncserver/Makefile.am, libvncserver/rfbcrypto.h, + libvncserver/rfbcrypto_gnutls.c, libvncserver/rfbcrypto_included.c, + libvncserver/rfbcrypto_openssl.c, + libvncserver/rfbcrypto_polarssl.c, libvncserver/websockets.c: Add + support for different crypto implementations + +2011-09-11 Christian Beier + + * configure.ac, libvncserver/Makefile.am: Autotools: Fix OpenSSL and + GnuTLS advertisement. + +2011-09-11 Christian Beier + + * libvncserver/rfbssl_gnutls.c: Fix libvncserver GnuTLS init. gnutls_certificate_set_x509_trust_file() returns the number of + processed certs and _not_ GNUTLS_E_SUCCESS (0) on success! + +2011-09-11 Christian Beier + + * AUTHORS, libvncserver/websockets.c: Update AUTHORS regarding the + websocket guys. + +2011-08-28 Gernot Tenchio + + * configure.ac: configure: Add AM_SILENT_RULES Working with “silent make mode” makes debugging a lot of easier + since warnings wont shadowed by useless compiler noise + +2011-08-27 Gernot Tenchio + + * CMakeLists.txt: cmake: set SOVERSION + +2011-09-11 Christian Beier + + * configure.ac, libvncserver/Makefile.am: Autotools: Fix OpenSSL and + GnuTLS advertisement. + +2011-09-11 Christian Beier + + * libvncserver/rfbssl_gnutls.c: Fix libvncserver GnuTLS init. gnutls_certificate_set_x509_trust_file() returns the number of + processed certs and _not_ GNUTLS_E_SUCCESS (0) on success! + +2011-09-11 Christian Beier + + * AUTHORS, libvncserver/websockets.c: Update AUTHORS regarding the + websocket guys. + +2011-09-02 Gernot Tenchio + + * libvncserver/websockets.c: websocket: Use a single buffer for + both, encoding and decoding + +2011-08-30 Gernot Tenchio + + * libvncserver/rfbssl_gnutls.c: rfbssl_gnutls: Merge + rfbssl_peek/rfbssl_read into one function + +2011-08-30 Gernot Tenchio + + * libvncserver/websockets.c: websockets: fix + webSocketCheckDisconnect() Do not consume the peeked data if no close frame was detected. + +2011-08-29 Gernot Tenchio + + * libvncserver/websockets.c: websockets: use 32bit Xor in + webSocketsDecodeHybi() + +2011-08-29 Gernot Tenchio + + * CMakeLists.txt: cmake: use sha1.c for websocket builds + +2011-08-25 Gernot Tenchio + + * libvncserver/websockets.c: websockets: nothing to worry about + +2011-08-25 Gernot Tenchio + + * libvncserver/websockets.c: websockets: added gcrypt based sha1 + digest funtion + +2011-08-25 Joel Martin + + * common/sha1.c, common/sha1.h, libvncserver/Makefile.am, + libvncserver/websockets.c: Add sha1.*. Remove UTF-8 encode. Protocol + handling. Add common/sha1.h and common/sha1.c so that we have the SHA routines + even if openssl is not available. From the IETF SHA RFC example + code. Remove the UTF-8 encoding hack. This was really just an experiment. If the protocol passed in the handshake has "binary" then don't + base64 encode for the HyBi protocol. This will allow noVNC to + request the binary data be passed raw and not base64 encoded. + Unfortunately, the client doesn't speak first in VNC protocol (bad + original design). If it did then we could determine whether to + base64 encode or not based on the first HyBi frame from the client + and whether the binary bit is set or not. Oh well. Misc Cleanup: - Always free response and buf in handshake routine. - Remove some unused variables. + +2011-08-25 Gernot Tenchio + + * CMakeLists.txt: cmake: make some noise + +2011-08-25 Gernot Tenchio + + * libvncserver/rfbssl_gnutls.c: websockets: remove warning on 64bit + platforms + +2011-08-25 Gernot Tenchio + + * libvncserver/websockets.c: websockets: Removed debugging left over + +2011-08-25 Gernot Tenchio + + * libvncserver/websockets.c: websockets: Use callback functions for + encode/decode + +2011-08-25 Gernot Tenchio + + * libvncserver/rfbserver.c, libvncserver/sockets.c, + libvncserver/websockets.c, rfb/rfb.h: websockets: Move Hixie + disconnect hack to websockets.c Move the hixie disconnect hack to websockets.c. Removed the + remaining websockets vars from rfbClientPtr, so all websockets stuff + is hidden behind an opaque pointer. + +2011-08-25 Gernot Tenchio + + * libvncserver/rfbserver.c, libvncserver/sockets.c, + libvncserver/websockets.c, rfb/rfb.h: websockets: Initial HyBi + support + +2011-08-16 Gernot Tenchio + + * CMakeLists.txt: cmake: don't link sdl libs to vnc libraries Signed-off-by: Johannes Schindelin + +2011-08-16 Gernot Tenchio + + * libvncserver/sockets.c, libvncserver/websockets.c, rfb/rfb.h: + websockets: Add wspath member to rfbClientRec Added wspath member to rfbClientRec which holds the path component + of the initial websocket request. Signed-off-by: Johannes Schindelin + +2011-08-16 Gernot Tenchio + + * CMakeLists.txt, common/md5.c, common/md5.h, + libvncserver/Makefile.am, libvncserver/md5.c, libvncserver/md5.h: + Move libvncserver/md5* to common Signed-off-by: Johannes Schindelin + +2011-08-16 Gernot Tenchio + + * CMakeLists.txt, rfb/rfbconfig.h.cmake: websockets: Add Websockets + support to CMakeLists.txt Signed-off-by: Johannes Schindelin + +2011-08-16 Joel Martin + + * libvncserver/Makefile.am, libvncserver/cargs.c: websockets: Add + SSL cert command line options. - Add --sslcertfile and --sslkeyfile. These should really be + combined with the existing x11vnc command line options for SSL + support. Signed-off-by: Johannes Schindelin + +2011-08-17 Gernot Tenchio + + * configure.ac, libvncserver/Makefile.am, + libvncserver/rfbssl_gnutls.c, libvncserver/rfbssl_openssl.c: + websockets: add GnuTLS and OpenSSL support For now, only OpenSSL support is activated through configure, since + GnuTLS is only used in LibVNCClient. [jes: separated this out from the commit adding encryption support, + added autoconf support.] Signed-off-by: Johannes Schindelin + +2011-08-16 Gernot Tenchio + + * libvncserver/Makefile.am, libvncserver/rfbserver.c, + libvncserver/rfbssl.h, libvncserver/rfbssl_none.c, + libvncserver/sockets.c, libvncserver/websockets.c, rfb/rfb.h: + websockets: Add encryption support [jes: moved out GnuTLS and OpenSSL support, added a dummy support, + to separate changes better, and to keep things compiling] Signed-off-by: Johannes Schindelin + +2011-08-16 Joel Martin + + * libvncserver/websockets.c: websockets: Properly parse Hixie-76 + handshake. Signed-off-by: Johannes Schindelin + +2011-08-16 Joel Martin + + * libvncserver/rfbserver.c, libvncserver/websockets.c: websockets: + Add UTF-8 encoding support. This is not completely standard UTF-8 encoding. Only code points + 0-255 are encoded and never encoded to more than two octets. Since + '\x00' is a WebSockets framing character, it's easier for all + parties to encode zero as '\xc4\x80', i.e. 194+128, i.e. UTF-8 256. This means that a random stream will be slightly more than 50% + larger using this encoding scheme. But it's easy CPU-wise for client + and server to decode/encode. This is especially important for + clients written in languages that have weak bitops, like Javascript + (i.e. the noVNC client). Signed-off-by: Johannes Schindelin + +2011-08-16 Joel Martin + + * libvncserver/rfbserver.c: websockets: Better disconnect detection. If the only thing we are waiting on is a WebSockets terminator, then + remove it from the stream early on in rfbProcessClientNormalMessage. Signed-off-by: Johannes Schindelin + +2011-08-16 Joel Martin + + * configure.ac, libvncserver/Makefile.am, libvncserver/md5.c, + libvncserver/md5.h, libvncserver/rfbserver.c, + libvncserver/sockets.c, libvncserver/websockets.c, rfb/rfb.h: + websockets: Initial WebSockets support. Has a bug: WebSocket client disconnects are not detected. + rfbSendFramebufferUpdate is doing a MSG_PEEK recv to determine if + enough data is available which prevents a disconnect from being + detected. Otherwise it's working pretty well. [jes: moved added struct members to the end for binary compatibility + with previous LibVNCServer versions, removed an unused variable] Signed-off-by: Johannes Schindelin + +2011-08-17 Johannes Schindelin + + * .gitignore: .gitignore: zippy has moved Signed-off-by: Johannes Schindelin + +2011-07-25 Christian Beier + + * examples/android/README: Add installation hints to android example + README. + +2011-07-22 William Roberts + + * examples/android/jni/fbvncserver.c: Reduced memory footprint by + 50% + +2011-07-22 William Roberts + + * examples/android/jni/fbvncserver.c: Corrected resolution issue, + but screen is getting reported as wrong size + +2011-07-23 ckanru + + * examples/android/jni/fbvncserver.c: Fixes running vncserver on + beagleboard/0xdroid and possibly any device without a touch screen. + Because fake touch screen always report zero when query device + information, coordinates transformation is not needed. Signed-off-by: Christian Beier + +2011-07-23 Christian Beier + + * configure.ac, examples/Makefile.am, examples/android/Makefile.am, + rfb/rfb.h, vncterm/Makefile.am: Adopt autotools build system to + Android. LibVNCServer/LibVNCClient now build for Android! + +2011-07-23 Christian Beier + + * examples/android/README, examples/android/jni/Android.mk, + examples/android/jni/fbvncserver.c: Add androidvncserver example. + +2011-07-22 letsgoustc + + * rfb/rfb.h: Make LibVNCServer build for Android. Signed-off-by: Christian Beier + +2011-07-19 Joel Martin + + * libvncserver/tight.c: tightPng: check even for SendGradientRect. Signed-off-by: Christian Beier + +2011-07-19 Joel Martin + + * CMakeLists.txt, configure.ac, libvncserver/Makefile.am, + libvncserver/rfbserver.c, libvncserver/stats.c, + libvncserver/tight.c, rfb/rfb.h, rfb/rfbconfig.h.cmake, + rfb/rfbproto.h: tightPng: Add initial tightPng encoding support. http://wiki.qemu.org/VNC_Tight_PNG Signed-off-by: Joel Martin Signed-off-by: + Christian Beier + +2011-06-01 Christian Beier + + * libvncserver/main.c, libvncserver/sockets.c: Remove some unused + variables. + +2010-11-14 George Kiagiadakis + + * libvncserver/sockets.c, rfb/rfb.h: Fix rfbProcessNewConnection to + return some value instead of void. BUG: 256891 Signed-off-by: Christian Beier + +2010-11-10 George Kiagiadakis + + * libvncserver/main.c, libvncserver/sockets.c, rfb/rfb.h: Split two + event-loop related functions out of the rfbProcessEvents() + mechanism. This is required to be able to do proper event loop integration with + Qt. Idea was taken from vino's libvncserver fork. Signed-off-by: Christian Beier + +2011-05-06 Cristian Rodríguez + + * libvncserver/tightvnc-filetransfer/filetransfermsg.c: Fix buffer + overflow Signed-off-by: Cristian Rodríguez + Signed-off-by: Christian Beier + +2011-04-30 Christian Beier + + * libvncserver/tight.c: Revert "Fix memory corruption bug." This reverts commit c1363fa9583ed41b94fbc79b3ff410b7d5189407. The proper fix was already in + 804335f9d296440bb708ca844f5d89b58b50b0c6. + +2011-04-28 Johannes Schindelin + + * AUTHORS: UTF-8ify AUTHORS Signed-off-by: Johannes Schindelin + +2011-04-28 Johannes Schindelin + + * AUTHORS: Update AUTHORS Signed-off-by: Johannes Schindelin + +2010-11-10 George Kiagiadakis + + * libvncserver/tight.c: Fix memory corruption bug. This bug occured when a second telepathy tubes client was connected + after the first one had disconnected and the channel (thus, the + screen too) had been destroyed. Signed-off-by: Johannes Schindelin + +2010-11-10 George Kiagiadakis + + * common/zywrletemplate.c, libvncserver/auth.c, + libvncserver/rfbserver.c, libvncserver/scale.c, + libvncserver/scale.h, rfb/rfb.h: Fix compilation in c89 mode. Signed-off-by: Johannes Schindelin + +2011-04-27 Vic Lee + + * libvncclient/tls.c: Replace deprecated GnuTLS functions + gnutls_*_set_priority with gnutls_priority_set_direct. The functions gnutls_*_set_priority we used were marked deprecated + since latest GnuTLS version 2.12. However the replacement function + gnutls_priority_set_direct is available since 2.2, which is even + lower than our version requirement 2.4 in configure. The patch just + replace the deprecate function to fix the compile warning. Signed-off-by: Vic Lee Signed-off-by: Johannes + Schindelin + +2011-03-30 Christian Beier + + * ChangeLog: Update ChangeLog for 0.9.8. + +2011-03-29 Christian Beier + + * README: Remove RDP from the README description. We do VNC but no RDP. Pointed out by Vic Lee, thanks! + +2011-03-29 Christian Beier + + * utils/git2cl.pl: Fix skipping of merge commits in log convert + script. + +2011-03-29 Christian Beier + + * bdf2c.pl, consolefont2c.pl, utils/bdf2c.pl, + utils/consolefont2c.pl, utils/git2cl.pl: Add a git-log to GNU-Style + ChangeLog converter script. Also put all helper scripts into a utils directory. + +2011-03-28 Christian Beier + + * NEWS: Mention the pkg-config stuff in NEWS. + +2011-03-27 Vic Lee + + * .gitignore, Makefile.am, configure.ac, libvncclient.pc.in, + libvncserver.pc.in: Add libvncserver.pc and libvncclient.pc files. Signed-off-by: Vic Lee Signed-off-by: Christian + Beier + +2011-03-17 Christian Beier + + * libvncclient/ultra.c, libvncserver/ultra.c: Fix regression in + Ultra encoding introduced by commit + fe1ca16e9b75b5f38ab374c8dfff92d2c3ea4532. My bad. There we see what the encodings test is good for ;-) + +2011-03-17 Christian Beier + + * test/encodingstest.c: Update encodingstest. * Fixed segfault on shutdown. * Updated to test all encodings. * Fixed to operate with encodings that split up rects into smaller rects. + +2011-03-17 Christian Beier + + * libvncclient/rfbproto.c: Remove useless comparisons that always + evaluate to false. There can not be more than 255 security types and MSLogon is RFB 3.6 + only. + +2011-03-17 Christian Beier + + * examples/rotate.c, examples/rotatetemplate.c, examples/vncev.c, + libvncclient/listen.c, libvncclient/rfbproto.c, + libvncclient/ultra.c, libvncclient/zrle.c, + libvncserver/rfbserver.c, libvncserver/ultra.c: Fix (most) MinGW32 + compiler warnings. + +2011-03-17 Christian Beier + + * examples/rotate.c, examples/zippy.c, libvncserver/zrle.c, + libvncserver/zrleencodetemplate.c: Fix remaining compiler warnings. + +2011-03-17 Christian Beier + + * VisualNaCro/nacro.c, examples/backchannel.c, examples/camera.c, + examples/colourmaptest.c, examples/example.c, + examples/filetransfer.c, examples/fontsel.c, examples/mac.c, + examples/pnmshow.c, examples/pnmshow24.c, examples/simple.c, + examples/simple15.c, examples/vncev.c, examples/zippy.c, + test/cargstest.c, test/copyrecttest.c, test/cursortest.c, + test/encodingstest.c: Check rfbGetScreen() return value everywhere. This fixes a segfault when a server is invoked with the '-help' + commandline argument. + +2011-03-12 Christian Beier + + * CMakeLists.txt, rfb/rfbconfig.h.cmake: CMake: Check for libgcrypt + availability. + +2011-03-12 Christian Beier + + * CMakeLists.txt: CMake: Threads can be available even if SDL is + not. + +2011-03-12 Christian Beier + + * CMakeLists.txt: CMake: fix building SDLvncviewer. + +2011-03-12 Christian Beier + + * Makefile.am: Include cmake configure file templates in dist + tarball. Signed-off-by: Christian Beier + +2011-03-12 Christian Beier + + * rfb/rfbconfig.h.in, rfb/stamp-h.in: Remove autogenerated files. + +2011-03-12 Christian Beier + + * NEWS: Update NEWS for 0.9.8 release. + +2011-03-07 Christian Beier + + * libvncclient/tls.c: Fix libvncclient TLS for Windows builds. GnuTLS seems to expect proper errno values internally. So set them + in our custom push/pull functions. Parts of the patch stolen from + libcurl, thanks! Signed-off-by: Christian Beier + +2011-03-07 Christian Beier + + * libvncclient/rfbproto.c: Let libvncclient build with gcrypt for + MinGW32 builds. Signed-off-by: Christian Beier + +2011-03-07 Vic Lee + + * libvncclient/sockets.c: Use WaitForMessage instead of sleep in + socket reading to fix performance issue. Signed-off-by: Christian Beier + +2011-03-10 Christian Beier + + * common/d3des.c, common/d3des.h, libvncserver/auth.c, + libvncserver/corre.c, libvncserver/cutpaste.c, libvncserver/draw.c, + libvncserver/font.c, libvncserver/hextile.c, libvncserver/httpd.c, + libvncserver/rfbregion.c, libvncserver/rre.c, + libvncserver/selbox.c, libvncserver/sockets.c, + libvncserver/stats.c, libvncserver/tableinit24.c, + libvncserver/tableinitcmtemplate.c, + libvncserver/tableinittctemplate.c, + libvncserver/tabletrans24template.c, + libvncserver/tabletranstemplate.c, libvncserver/translate.c, + libvncserver/zrletypes.h, rfb/rfbregion.h, test/blooptest.c, + test/cursortest.c: Set proper file permissions for source files. + +2011-03-10 Christian Beier + + * CMakeLists.txt, configure.ac: Next version will be 0.9.8. + +2011-03-10 Christian Beier + + * Makefile.am, configure.ac, contrib/Makefile.am, contrib/zippy.c, + examples/Makefile.am, examples/zippy.c: Move zippy.c to examples. + +2011-03-03 Christian Beier + + * libvncclient/sockets.c, libvncclient/tls.c, libvncserver/httpd.c, + libvncserver/rfbserver.c, libvncserver/sockets.c: Call + WSAGetLastError() everywhere errno is read after a Winsock call. Winsock does NOT update errno for us, we have fetch the last error + manually using WSAGetLastError(). + +2011-01-29 Christian Beier + + * common/lzoconf.h, common/lzodefs.h, common/minilzo.c, + common/minilzo.h, libvncclient/Makefile.am, + libvncserver/Makefile.am: Update minilzo library used for Ultra + encoding to ver 2.04. According to the minilzo README, this brings a significant speedup + on 64-bit architechtures. Changes compared to old version 1.08 can be found here: + http://www.oberhumer.com/opensource/lzo/lzonews.php Signed-off-by: Christian Beier + +2011-01-24 Christian Beier + + * libvncserver/corre.c, libvncserver/main.c, + libvncserver/private.h, libvncserver/rfbserver.c, + libvncserver/rre.c, libvncserver/ultra.c, rfb/rfb.h: libvncserver: + Make RRE, CoRRE and Ultra encodings thread-safe. This adds generic before/after encoding buffers to the rfbClient + struct, so there is no need for thread local storage. Signed-off-by: Christian Beier + +2011-02-02 Christian Beier + + * Makefile.am: Include CMakeLists.txt file in dist tarball. + +2011-01-29 Christian Beier + + * .cvsignore, README.cvs, VisualNaCro/.cvsignore, + classes/.cvsignore, client_examples/.cvsignore, contrib/.cvsignore, + cvs_update_anonymously, examples/.cvsignore, + libvncclient/.cvsignore, libvncserver/.cvsignore, + libvncserver/tightvnc-filetransfer/.cvsignore, rfb/.cvsignore, + test/.cvsignore, vncterm/.cvsignore: Remove unneeded files + concerning CVS. We have a git repo nowadays and I guess we won't go back to CVS. Signed-off-by: Christian Beier + +2011-01-31 Johannes Schindelin + + * examples/example.dsp, libvncserver.dsp, libvncserver.dsw: Remove + completely broken Visual Studio project files If people seriously consider building with Visual Studio, there is + always CMake. Pointed out by Christian Beier. Signed-off-by: Johannes Schindelin + +2011-01-31 Christian Beier + + * client_examples/Makefile.am, client_examples/SDLvncviewer.c: + SDLvncviewer: fix compilation from dist tarball. Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2011-01-21 Vic Lee + + * acinclude.m4, configure.ac, libvncclient/rfbproto.c, + rfb/rfbproto.h: Add ARD (Apple Remote Desktop) security type support Signed-off-by: Vic Lee Signed-off-by: Christian + Beier + +2011-01-25 Christian Beier + + * CMakeLists.txt, common/d3des.c, common/d3des.h, common/lzoconf.h, + common/minilzo.c, common/minilzo.h, common/vncauth.c, + common/zywrletemplate.c, libvncclient/Makefile.am, + libvncclient/lzoconf.h, libvncclient/minilzo.c, + libvncclient/minilzo.h, libvncclient/rfbproto.c, + libvncclient/zrle.c, libvncserver/Makefile.am, + libvncserver/d3des.c, libvncserver/d3des.h, libvncserver/lzoconf.h, + libvncserver/minilzo.c, libvncserver/minilzo.h, + libvncserver/vncauth.c, libvncserver/zywrletemplate.c: Put files + used by both libs into a 'common' dir. No functional changes. All files used by _both_ libvncserver and + libvncclient are put into a 'common' directory and references from + other files as well as Autotools and CMake build systems are + updated. Signed-off-by: Christian Beier + +2011-01-20 ebola_rulez + + * libvncserver/vncauth.c: Fix two errors found by cppcheck Signed-off-by: Vic Lee Signed-off-by: Christian + Beier + +2011-01-01 runge + + * libvncserver/rfbserver.c: Remove never used protocol version name + string. + +2010-12-29 runge + + * configure.ac, x11vnc/ChangeLog, x11vnc/Makefile.am, + x11vnc/README, x11vnc/avahi.c, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/connections.h, x11vnc/help.c, + x11vnc/inet.c, x11vnc/inet.h, x11vnc/macosx.c, x11vnc/macosxCG.c, + x11vnc/macosxCG.h, x11vnc/macosx_opengl.c, x11vnc/macosx_opengl.h, + x11vnc/options.c, x11vnc/options.h, x11vnc/rates.c, + x11vnc/screen.c, x11vnc/ssltools.h, x11vnc/util.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, + x11vnc/xwrappers.c: x11vnc: Use opengl to read screen on macosx. + non-deprecated macosx interfaces for input injection. + +2010-12-21 runge + + * configure.ac, prepare_x11vnc_dist.sh, x11vnc/README, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: x11vnc: force + --with-system-libvncserver to use correct headers. + +2010-12-21 runge + + * classes/ssl/ss_vncviewer, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-cursor-colors+no-tab + -traversal.patch, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, + prepare_x11vnc_dist.sh, x11vnc/8to24.c, x11vnc/ChangeLog, + x11vnc/Makefile.am, x11vnc/README, x11vnc/RELEASE-NOTES, + x11vnc/appshare.c, x11vnc/cleanup.c, x11vnc/gui.c, x11vnc/help.c, + x11vnc/keyboard.c, x11vnc/keyboard.h, x11vnc/linuxfb.c, + x11vnc/macosx.c, x11vnc/macosxCG.c, x11vnc/misc/Makefile.am, + x11vnc/misc/README, x11vnc/misc/qt_tslib_inject.pl, + x11vnc/misc/uinput.pl, x11vnc/pointer.c, x11vnc/remote.c, + x11vnc/scan.c, x11vnc/screen.c, x11vnc/sslhelper.c, + x11vnc/ssltools.h, x11vnc/uinput.c, x11vnc/uinput.h, + x11vnc/unixpw.c, x11vnc/user.c, x11vnc/util.h, x11vnc/v4l.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c, x11vnc/xevents.c, x11vnc/xevents.h, + x11vnc/xrecord.c, x11vnc/xrecord.h, x11vnc/xwrappers.c: x11vnc: + touchscreen uinput support and Java viewer mousewheel support. See + x11vnc/ChangeLog for rest. + +2010-12-01 Tobias Doerffel + + * libvncserver/sockets.c: libvncserver sockets: check cl->screen + before accessing it In commit 079394ca5b14d8067b95a9cf95a834828b4425a6 new code with + insufficient checks was introduced causing a segfault when doing a + HTTP server connection. Such connections have no screen set in the + client data structure. Signed-off-by: Tobias Doerffel + +2010-11-30 Christian Beier + + * Doxyfile: Doxygen documentation: actually add Doxyfile. + +2010-11-29 Johannes Schindelin + + * index.html, success.html: The website is now maintained + independently Signed-off-by: Johannes Schindelin + +2010-11-18 Christian Beier + + * client_examples/SDLvncviewer.c, client_examples/backchannel.c, + client_examples/ppmtest.c, client_examples/vnc2mpg.c, + examples/backchannel.c, examples/camera.c, examples/example.c, + examples/filetransfer.c, examples/pnmshow.c, examples/pnmshow24.c, + examples/vncev.c, rfb/rfb.h, rfb/rfbclient.h, rfb/rfbproto.h: Add + doxygen documentation support. Adds automagically generating libvncserver/libvncclient API documentation using doxygen. This gives a nice overview on both + APIs, include dependencies and function call/caller + dependencies. TODO: Modify all the explaining comments in the .c files for use + with doxygen as well. This patch only changes comments, no functional changes at all! Signed-off-by: Christian Beier + +2010-11-18 Christian Beier + + * libvncserver/main.c: libvncserver: fix endless loop when server + closed client in threaded mode. Signed-off-by: Christian Beier + +2010-11-18 Christian Beier + + * libvncserver/sockets.c: libvncserver sockets: favor per-screen + maxclientwait over global one when set. Signed-off-by: Christian Beier + +2010-11-11 Christian Beier + + * libvncserver/rfbserver.c, libvncserver/stats.c, rfb/rfbproto.h: + libvncserver cleanup: remove rfbKeyFrame remnants. + +2010-11-02 Christian Beier + + * libvncclient/rfbproto.c, libvncserver/main.c, + libvncserver/rfbserver.c, libvncserver/stats.c, rfb/rfb.h, + rfb/rfbclient.h, rfb/rfbproto.h: libvnc[server|client]: implement + xvp VNC extension. This implements the xvp VNC extension, which is described in the + community version of the RFB protocol: + http://tigervnc.sourceforge.net/cgi-bin/rfbproto It is also + mentioned in the official RFB protocol. + +2010-10-28 Tobias Doerffel + + * libvncserver/main.c: Added missing initialization of extension + mutex When not calling rfbRegisterProtocolExtension() the extension mutex + is uninitialized but used upon calling rfbGetExtensionIterator() and + rfbReleaseExtensionIterator() in rfbNewTCPOrUDPClient(). This causes + libvncserver to crash on Win32 when building with thread support. Signed-off-by: Tobias Doerffel + Signed-off-by: Christian Beier + +2010-10-21 Christian Beier + + * libvncclient/rfbproto.c, rfb/rfbproto.h: Only define strncasecmp + to _strnicmp when using MS compiler. Redefining strncasecmp to _strnicmp makes libvncclient hang forever + in SetFormatAndEncodings() on Windows when built with MinGW64. Reported by Tobias Doerffel , thanks! + +2010-10-20 Tobias Doerffel + + * libvncserver/rfbserver.c: In rfbSendDirContent() we have to make + sure to call closedir() before returning. This did not happen if + rfbSendFileTransferMessage() failed. Signed-off-by: Christian Beier + +2010-10-20 Christian Beier + + * libvncclient/sockets.c: Fix build failure wrt IP QoS support in + libvncclient. This is a small addendum to + 0797e42a4aaf8131ae71899faea2d682ed81cb59. Seems that having IPv6 + support in the OS does not necessarily mean that IPV6_TCLASS is + available. One such case seems to be Mac OS X 10.5. + +2010-02-09 Vic Lee + + * libvncclient/sockets.c: Avoid 100% CPU usage when calling + ReadFromRFBServer and no available bytes to read Signed-off-by: Vic Lee Signed-off-by: Christian + Beier + +2010-10-08 Christian Beier + + * rfb/rfbproto.h: rfb/rfbproto.h: Prefix WORDS_BIGENDIAN when it is + defined. Some (all?) autotool versions do not properly prefix WORDS_BIGENDIAN + with LIBVNCSERVER_, so do that manually here. Thanks to Lorenz Kolb for reporting. + +2010-09-29 Christian Beier + + * TODO, libvncclient/rfbproto.c, libvncclient/sockets.c, + libvncclient/vncviewer.c, rfb/rfbclient.h: IP QoS support in + libvncclient. This enables setting the DSCP/Traffic Class field of IP/IPv6 packets + sent by a client. For example starting a client with -qosdscp 184 + marks all outgoing traffic for expedited forwarding. Implementation for Win32 is still a TODO, though. See + + http://betelco.blogspot.com/2009/03/dscp-marking-under-windows-at.htmlfor an overview of the Win32 QoS API mess... + +2010-09-07 Christian Beier + + * TODO, libvncclient/sockets.c, libvncserver/httpd.c, + libvncserver/rfbserver.c, libvncserver/sockets.c, rfb/rfb.h: + Non-blocking sockets for Windows. Expands the SetNonBlocking() function in libvncclient/sockets.c to + also work under Windows and also changes it to honour maybe already + present socket flags. A similar function was introduced for libvncserver as well and all + the #ifdef'ed fnctl calls replaced with calls to that one. Signed-off-by: Christian Beier + +2010-09-06 Christian Beier + + * libvncserver/main.c, libvncserver/rfbserver.c, + libvncserver/scale.c: Cleanup: remove CORBA stuff. The header file and most of the functions referred to do not exist + in libvncserver. Signed-off-by: Christian Beier + +2010-09-10 runge + + * classes/ssl/ss_vncviewer, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch: update + classes/ssl jars, patches, and script + +2010-09-10 runge + + * prepare_x11vnc_dist.sh, x11vnc/8to24.c, x11vnc/ChangeLog, + x11vnc/Makefile.am, x11vnc/README, x11vnc/avahi.c, x11vnc/avahi.h, + x11vnc/cleanup.c, x11vnc/connections.c, x11vnc/help.c, + x11vnc/inet.c, x11vnc/keyboard.c, x11vnc/misc/ultravnc_repeater.pl, + x11vnc/options.c, x11vnc/options.h, x11vnc/pointer.c, + x11vnc/pointer.h, x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/unixpw.c, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c, x11vnc/xevents.c, x11vnc/xwrappers.c: update + to x11vnc 0.9.12 + +2010-09-06 Christian Beier + + * libvncclient/rfbproto.c, libvncserver/tight.c: Fix MinGW32 + compilation with libjpeg. MinGW32 (or more exactly, a rpcndr.h file included by winsock2.h) + typedefs a 'boolean' type that jmorecfg.h included by jpeglib.h also + tries to typedef. So, tell the jpeg headers. Closes: 3007302 + +2010-07-11 Christian Beier + + * configure.ac, libvncclient/sockets.c: Fix MinGW32 checking for + IPv6. Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2010-06-29 Vic Lee + + * configure.ac, libvncclient/rfbproto.c, libvncclient/sockets.c, + rfb/rfbclient.h: libvncclient: add ipv6 support [jes: pulled the "host" declarations into the conditionally compiled + blocks where that variable is used. Also fixed non-IPv6 + connections.] Signed-off-by: Vic Lee Signed-off-by: Johannes + Schindelin + +2010-05-31 Wouter Van Meir + + * libvncclient/vncviewer.c: Call MallocFrameBuffer before + SetFormatAndEncodings The hook is still called after InitialiseRFBConnection() so we can + choose the color settings depending on the vnc server (or settings) + in that hook. This way one can use the "VNC server default format" pixelformat if + the client supports it, or perform a workaround (Intel AMT KVM + "classic vnc" server only works using 8bit colors in RFB3.8) Signed-off-by: Wouter Van Meir + Signed-off-by: Johannes Schindelin + +2010-05-19 Christian Beier + + * libvncserver/main.c, libvncserver/rfbserver.c, rfb/rfb.h: + Implement a DisplayFinishedHook for libvncserver. If set, this hook gets called just before rfbSendFrameBufferUpdate() + returns. Signed-off-by: Christian Beier + +2010-05-08 runge + + * ChangeLog, libvncclient/rfbproto.c: libvncclient: + rfbResizeFrameBuffer should also set updateRect. + +2010-05-08 runge + + * prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/README, + x11vnc/connections.c, x11vnc/screen.c, x11vnc/unixpw.c, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: x11vnc: tweaks to + prepare_x11vnc_dist.sh. set cd->unixname in apply_opts(). + +2010-05-07 Johannes Schindelin + + * AUTHORS: Complete the AUTHORS file Signed-off-by: Johannes Schindelin + +2010-05-07 Wouter Van Meir + + * CMakeLists.txt: fix CMakeLists.txt: other way to find pthread + library ... and fixed linking of the tests in the examples directory. Signed-off-by: Wouter Van Meir + Signed-off-by: Johannes Schindelin + +2010-05-05 runge + + * classes/ssl/index.vnc, classes/ssl/proxy.vnc, + classes/ssl/ultra.vnc, classes/ssl/ultraproxy.vnc, + classes/ssl/ultrasigned.vnc, prepare_x11vnc_dist.sh, x11vnc/README, + x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/connect_br.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: misc/etv sync. + +2010-05-01 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/misc/ultravnc_repeater.pl, + x11vnc/sslhelper.c, x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c, + x11vnc/xrecord.c: x11vnc: X11VNC_DISABLE_SSL_CLIENT_MODE option to + disable SSL client role in reverse connections. Improvements to + logging in ultravnc_repeater, ULTRAVNC_REPEATER_NO_RFB option. + Increase SSL timeout and print message if 'repeater' mode is + detected for reverse SSL connection. Fix RECORD scroll XCopyArea + detection with recent gtk/gdk library; set X11VNC_SCROLL_MUST_EQUAL to disable. Limit logging of RECORD error messages. + +2010-04-28 Johannes Schindelin + + * client_examples/Makefile.am: Another try to fix the _SOURCES issue Signed-off-by: Johannes Schindelin + +2010-04-28 Corentin Chary + + * CMakeLists.txt, rfb/rfbconfig.h.cmake: cmake: fix CMakeLists.txt - It's SDL_LIBRARY, not SDL_LIBRARIES - Detect GnuTLS and set the macro in rfbconfig.h - Add tls.c to libvncclient to avoid missing symbols Signed-off-by: Corentin Chary + Signed-off-by: Johannes Schindelin + +2010-04-25 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/enc.h, x11vnc/help.c, + x11vnc/remote.c, x11vnc/scan.c, x11vnc/sslhelper.c, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: incorporate new + ultravnc_dsm_helper.c. + +2010-04-18 runge + + * x11vnc/ChangeLog, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvncviewer.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/stunnel-maxconn.pa + tch, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: Sync ssvncviewer changes. + +2010-04-18 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/appshare.c, + x11vnc/connections.c, x11vnc/help.c, x11vnc/inet.c, x11vnc/inet.h, + x11vnc/misc/connect_switch, x11vnc/misc/desktop.cgi, + x11vnc/misc/ultravnc_repeater.pl, x11vnc/options.c, + x11vnc/options.h, x11vnc/remote.c, x11vnc/screen.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/user.c, + x11vnc/util.c, x11vnc/v4l.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xinerama.c: + Improvements to demo scripts. Alias -coe for -connect_or_exit. Fix + HAVE_V4L2. Warn no Xvfb, Xdummy, or Xvnc. Xinerama screens. + +2010-04-09 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/connections.h, x11vnc/enc.h, x11vnc/help.c, x11vnc/inet.c, + x11vnc/inet.h, x11vnc/options.c, x11vnc/options.h, x11vnc/remote.c, + x11vnc/screen.c, x11vnc/sslcmds.c, x11vnc/sslhelper.c, + x11vnc/sslhelper.h, x11vnc/ssltools.h, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/user.c, x11vnc/util.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, + x11vnc/xevents.c, x11vnc/xinerama.c: x11vnc: exit(1) for + -connect_or_exit failure, quiet query mode for grab_state, + pointer_pos, etc. ipv6 support. STUNNEL_LISTEN for particular + interface. -input_eagerly in addition to -allinput. quiet Xinerama + message. + +2010-04-09 runge + + * classes/ssl/ss_vncviewer, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch: Improvements to + Java viewer: troubleshooting settings and workarounds, misc bug + fixes. + +2010-04-09 runge + + * x11vnc/misc/connect_switch, x11vnc/misc/desktop.cgi, + x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/connect_br.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvnc.1, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvncviewer.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_getpatches, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch, x11vnc/misc/inet6to4: Synchronize ssvnc 1.0.26. + Improvements to perl scripts desktop.cgi, connect_switch and + inet6to4. + +2010-03-21 runge + + * classes/ssl/README, classes/ssl/onetimekey, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/cursor.c, x11vnc/help.c, + x11vnc/keyboard.c, x11vnc/misc/Makefile.am, x11vnc/misc/README, + x11vnc/misc/connect_switch, x11vnc/misc/desktop.cgi, + x11vnc/misc/inet6to4, x11vnc/misc/panner.pl, + x11vnc/misc/ultravnc_repeater.pl, x11vnc/remote.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: classes/ssl: + Many improvements to Java SSL applet, onetimekey serverCert param, + debugging printout, user dialogs, catch socket exceptions, + autodetect x11vnc for GET=1. x11vnc: misc/scripts: desktop.cgi, + inet6to4, panner.pl. X11VNC_HTTPS_DOWNLOAD_WAIT_TIME, -unixpw %xxx + documented, and can run user cmd in UNIXPW_CMD. FD_XDMCP_IF for + create script, autodetect dm on udp6 only. Queries: pointer_x, + pointer_y, pointer_same, pointer_root. Switch on -xkd if keysyms + per key > 4 in all cases. daemon mode improvements for + connect_switch, inet6to4, ultravnc_repeater.pl. Dynamic change of + -clip do not create new fb if WxH is unchanged. + +2010-03-21 runge + + * configure.ac: I think two HAVE_X's were missed. + +2010-03-13 Johannes Schindelin + + * libvncclient/rfbproto.c, libvncclient/vncviewer.c: Fix compilation + without TLS Signed-off-by: Johannes Schindelin + +2010-03-13 Johannes Schindelin + + * client_examples/Makefile.am, client_examples/SDLvncviewer.c: Fix + compilation with newer automake For some reason, this developer's automake no longer understands + _SOURCES lines anymore. Work around that. Signed-off-by: Johannes Schindelin + +2010-03-13 Johannes Schindelin + + * client_examples/Makefile.am, configure.ac: Rename HAVE_X -> + HAVE_X11 This change is just for consistency reasons. Signed-off-by: Johannes Schindelin + +2010-02-22 runge + + * classes/ssl/README, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/scan.c, + x11vnc/sslcmds.c, x11vnc/sslcmds.h, x11vnc/ssltools.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: classes/ssl: + Java SSL applet viewer now works with certificate chains. x11vnc: + Printout option -sslScripts. Suggest -auth guess in error message. + Set fake_screen width and height. Test for +kb in Xvfb. + +2010-01-22 Christian Beier + + * libvncclient/vncviewer.c: libvncclient/vncviewer.c: don't set + serverPort in rfbInitClient(). The serverPort member is already set in rfbGetClient(), if we set it + again in rfbInitClient(), this breaks playing of vncrec files (this + relies on serverPort set to -1). Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2010-01-16 Johannes Schindelin + + * libvncclient/vncviewer.c: LibVNCClient: make sure that the port is + initialized correctly. While at it, adjust coding style. Signed-off-by: Johannes Schindelin + +2010-01-15 Vic Lee + + * libvncclient/rfbproto.c, libvncclient/vncviewer.c, + rfb/rfbclient.h: Add UltraVNC Repeater support in libvncclient [jes: adjusted coding style, made sure port is initialized + correctly] Signed-off-by: Vic Lee Signed-off-by: Johannes + Schindelin + +2010-01-07 runge + + * x11vnc/README, x11vnc/misc/Xdummy, x11vnc/x11vnc.1, + x11vnc/x11vnc_defs.c: x11vnc: add modeline creation to Xdummy. + +2010-01-07 Christian Beier + + * libvncserver/font.c: libvncserver/font.c: add some checks to + rfbDrawChar(). In some cases (bad font data) the coordinates evaluate to <0, + causing a segfault in the following memcpy(). [jes: keep the offset, but do not try to segfault] Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2010-01-07 Christian Beier + + * vncterm/LinuxVNC.c: LinuxVNC: Fix for no input possible because of + ctrl key being stuck. Issue was reported as Debian bug ##555988, + http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=555988 Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2010-01-04 Christian Beier + + * vncterm/LinuxVNC.c, vncterm/VNConsole.c: LinuxVNC: fix segfault at + "linuxvnc 1 -help". This fixes Debian Bug #399501: Switch to tty1. Run "linuxvnc 1 + -help". You see help text, followed by "Segmentation fault". Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2010-01-02 runge + + * x11vnc/8to24.c, x11vnc/8to24.h, x11vnc/ChangeLog, x11vnc/README, + x11vnc/allowed_input_t.h, x11vnc/appshare.c, x11vnc/avahi.c, + x11vnc/avahi.h, x11vnc/blackout_t.h, x11vnc/cleanup.c, + x11vnc/cleanup.h, x11vnc/connections.c, x11vnc/connections.h, + x11vnc/cursor.c, x11vnc/cursor.h, x11vnc/enc.h, x11vnc/enums.h, + x11vnc/gui.c, x11vnc/gui.h, x11vnc/help.c, x11vnc/help.h, + x11vnc/inet.c, x11vnc/inet.h, x11vnc/keyboard.c, x11vnc/keyboard.h, + x11vnc/linuxfb.c, x11vnc/linuxfb.h, x11vnc/macosx.c, + x11vnc/macosx.h, x11vnc/macosxCG.c, x11vnc/macosxCG.h, + x11vnc/macosxCGP.c, x11vnc/macosxCGP.h, x11vnc/macosxCGS.c, + x11vnc/macosxCGS.h, x11vnc/misc/README, x11vnc/misc/Xdummy, + x11vnc/misc/rx11vnc, x11vnc/misc/rx11vnc.pl, x11vnc/options.c, + x11vnc/options.h, x11vnc/params.h, x11vnc/pm.c, x11vnc/pm.h, + x11vnc/pointer.c, x11vnc/pointer.h, x11vnc/rates.c, x11vnc/rates.h, + x11vnc/remote.c, x11vnc/remote.h, x11vnc/scan.c, x11vnc/scan.h, + x11vnc/screen.c, x11vnc/screen.h, x11vnc/scrollevent_t.h, + x11vnc/selection.c, x11vnc/selection.h, x11vnc/solid.c, + x11vnc/solid.h, x11vnc/sslcmds.c, x11vnc/sslcmds.h, + x11vnc/sslhelper.c, x11vnc/sslhelper.h, x11vnc/ssltools.h, + x11vnc/uinput.c, x11vnc/uinput.h, x11vnc/unixpw.c, x11vnc/unixpw.h, + x11vnc/user.c, x11vnc/user.h, x11vnc/userinput.c, + x11vnc/userinput.h, x11vnc/util.c, x11vnc/util.h, x11vnc/v4l.c, + x11vnc/v4l.h, x11vnc/win_utils.c, x11vnc/win_utils.h, + x11vnc/winattr_t.h, x11vnc/x11vnc.1, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c, x11vnc/xdamage.c, x11vnc/xdamage.h, + x11vnc/xevents.c, x11vnc/xevents.h, x11vnc/xinerama.c, + x11vnc/xinerama.h, x11vnc/xkb_bell.c, x11vnc/xkb_bell.h, + x11vnc/xrandr.c, x11vnc/xrandr.h, x11vnc/xrecord.c, + x11vnc/xrecord.h, x11vnc/xwrappers.c, x11vnc/xwrappers.h: x11vnc: + small tweaks to Xdummy, rx11vnc*. Apply SMALL_FOOTPRINT to + -appshare text. Copyright year change. + +2010-01-02 runge + + * libvncserver/tightvnc-filetransfer/rfbtightserver.c: year++; + +2010-01-02 runge + + * ChangeLog, libvncserver/tightvnc-filetransfer/rfbtightserver.c: + tightvnc-filetransfer/rfbtightserver.c: enabled fix for tight + security type for RFB 3.8 (debian bug 517422.) + +2010-01-01 Vic Lee + + * libvncclient/rfbproto.c, libvncclient/vncviewer.c, + rfb/rfbclient.h: Add support for viewers to select security types on + demand Signed-off-by: Vic Lee Signed-off-by: Johannes + Schindelin + +2009-12-29 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, + x11vnc/misc/Xdummy, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: rename -create_x to -create_xsrv. + Hopefully done fixing Xdummy. + +2009-12-28 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/appshare.c, + x11vnc/misc/Xdummy, x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvnc.1, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvncviewer.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch, x11vnc/remote.c, x11vnc/solid.c, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/unixpw.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: Fix problems in + --without-x builds. Fix crash with -QD query for dbus info. Adjust + window size for small screens in -gui. Improve F1 help for xdm, + etc. include ssvnc 1.0.25 source. + +2009-12-24 runge + + * prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/README, + x11vnc/help.c, x11vnc/misc/Xdummy, x11vnc/ssltools.h, + x11vnc/unixpw.c, x11vnc/user.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: prepare_x11vnc_dist.sh for 0.9.10. + -xdummy_xvfb, -svc_xdummy_xvfb and -create_x shorthand. lxde + session. Xdummy improvements and root no longer required. + +2009-12-20 Vic Lee + + * libvncclient/rfbproto.c: Fix version checking (>=3.8) for + rfbVncAuthOK confirmation when no password required It seems that vino does not send AuthOK when there is no password + with anonymous TLS, and it seems that vino is the only <3.8 VNC + server that handles anonymous TLS at all, so let's not wait for the + packet that will never come. Signed-off-by: Vic Lee Signed-off-by: Johannes + Schindelin + +2009-12-21 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/sslhelper.c, + x11vnc/ssltools.h, x11vnc/unixpw.c, x11vnc/x11vnc.1, + x11vnc/x11vnc_defs.c: x11vnc: -DENC_HAVE_OPENSSL=0 to disable enc.h + but still have ssl. Tweak ps command in find_display. Try to handle AIX su. Ignore an initial newline at login: for -unixpw. + +2009-12-18 runge + + * x11vnc/ChangeLog: ChangeLog typo + +2009-12-18 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/unixpw.c, + x11vnc/user.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: Add tag=... to unixpw opts to set FD_TAG. + Prefer Xvfb over Xdummy. Reduce wait time for https. Add 'Login + succeeded' output to unixpw panel. + +2009-12-18 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/remote.c, x11vnc/unixpw.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: fix keycode and other + remote control actions under DIRECT: with an extra XFlush and other + safety measures. fflush(stderr) much in su_verify. Make the + -unixpw env. vars UNIXPW_DISABLE_SSL and UNIXPW_DISABLE_LOCALHOST + work correctly. Make -loopbg actually imply -bg. + +2009-12-15 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/inet.c, + x11vnc/misc/Makefile.am, x11vnc/misc/connect_switch, + x11vnc/misc/ultravnc_repeater.pl, x11vnc/options.c, + x11vnc/options.h, x11vnc/pointer.c, x11vnc/remote.c, + x11vnc/screen.c, x11vnc/ssltools.h, x11vnc/unixpw.c, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, + x11vnc/xdamage.c, x11vnc/xevents.c: X props names via env var. + fakebuttonevent action, connect_switch and ultravnc_repeater.pl + scripts, find_display try FD_XDM on failure, -quiet and -storepasswd + changes, better port 113 testing. + +2009-12-07 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, x11vnc/help.c, + x11vnc/remote.c, x11vnc/screen.c, x11vnc/sslhelper.c, + x11vnc/ssltools.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: X11VNC_EXTRA_HTTPS_PARAMS, + X11VNC_HTTP_LISTEN_LOCALHOST, X11VNC_REOPEN_SLEEP_MAX, + -findauth/-auth guess FD_XDM=1 for root, work around xhost + SI:localuser:root. + +2009-12-05 runge + + * classes/ssl/ss_vncviewer, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/appshare.c, x11vnc/gui.c, + x11vnc/unixpw.c, x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: Update java + and scripts in classes/ssl. x11vnc: declare crypt() on all + platforms. more wishes. + +2009-12-02 runge + + * x11vnc/ChangeLog, x11vnc/Makefile.am, x11vnc/README, + x11vnc/appshare.c, x11vnc/connections.c, x11vnc/cursor.c, + x11vnc/help.c, x11vnc/keyboard.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/pm.c, x11vnc/pointer.c, x11vnc/remote.c, + x11vnc/screen.c, x11vnc/sslhelper.c, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/unixpw.c, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/util.c, x11vnc/util.h, + x11vnc/win_utils.c, x11vnc/win_utils.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, x11vnc/xevents.c, + x11vnc/xinerama.c, x11vnc/xrandr.c: x11vnc: -appshare mode for + sharing an application windows instead of the entire desktop. map + port + 5500 in reverse connect. Add id_cmd remote control functions + for id (and other) windows. Allow zero port in SSL reverse + connections. Adjust delays between multiple reverse connections; + X11VNC_REVERSE_SLEEP_MAX env var. Add some missing mutex locks; add + INPUT_LOCK and threads_drop_input. More safety in -threads mode for + new framebuffer change. Fix some stderr leaking in -inetd mode. + +2009-12-01 runge + + * libvncserver/cursor.c, libvncserver/sockets.c, + libvncserver/translate.c: Add locks of updateMutex in + rfbRedrawAfterHideCursor() and rfbSetClientColourMap(). Up listen + limit from 5 to 32. + +2009-11-18 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/connect_br.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvncviewer.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: ssvnc/enhanced_tightvnc_viewer update. + +2009-11-18 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/cursor.c, x11vnc/cursor.h, + x11vnc/enc.h, x11vnc/help.c, x11vnc/remote.c, x11vnc/screen.c, + x11vnc/selection.c, x11vnc/solid.c, x11vnc/ssltools.h, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/unixpw.c, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c, x11vnc/xevents.c, x11vnc/xevents.h: x11vnc: + -findauth, -auth guess, & etc. + +2009-11-11 Christian Beier + + * libvncclient/listen.c, rfb/rfbclient.h: libvncclient: better + return value for non-forking listen. The return value now better reflects what has happened: 1 on success + (incoming connection on listen socket, we accepted it successfully), + -1 on error, 0 on timeout. Also change the select calls to not check _all_ possible file + descriptors. Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2009-11-05 Christian Beier + + * libvncclient/listen.c, libvncclient/rfbproto.c, + libvncclient/vncviewer.c, libvncserver/rfbserver.c: Fix checks for + socket values, 0 is a legal value. To make this work, we also have to initialize sockets to a default + value of -1. Also close a client listen socket if it's open. Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2009-10-31 Christian Beier + + * libvncclient/vncviewer.c: libvncclient: include winsock2.h in + vncviewer.c. fixes warning about closesocket being implicitly declared. Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2009-11-05 Vic Lee + + * configure.ac: Change GnuTLS minimum requirement to 2.4.0 Signed-off-by: Vic Lee Signed-off-by: Johannes + Schindelin + +2009-11-04 Vic Lee + + * client_examples/ppmtest.c, examples/example.c, + libvncclient/sockets.c, libvncclient/zrle.c, libvncserver/cursor.c, + libvncserver/tightvnc-filetransfer/rfbtightserver.c, + vncterm/VNConsole.c: Fix various compilation warnings Signed-off-by: Vic Lee Signed-off-by: Johannes + Schindelin + +2009-10-07 Vic Lee + + * libvncclient/rfbproto.c, libvncserver/vncauth.c, rfb/rfbclient.h, + rfb/rfbproto.h: Add MSLogon security type Signed-off-by: Vic Lee Signed-off-by: Johannes + Schindelin + +2009-10-31 Johannes Schindelin + + * AUTHORS: Add Alexander to the authors Signed-off-by: Johannes Schindelin + +2009-10-31 Christian Beier + + * client_examples/SDLvncviewer.c: SDLvncviewer: don't call clean up + the same client twice. If rfbInitConnection fails, it cleans up the client, so protect + against doing it ourselves again. Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2009-10-30 Christian Beier + + * client_examples/SDLvncviewer.c: SDLvncviewer: add SIGINT handler + to be able to actually stop program. Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2009-10-26 Christian Beier + + * client_examples/SDLvncviewer.c: SDLvncviewer: use -listennofork + when -listen specified. As -listen mode isn't really working under UNIX and not at all under + windows, use -listennofork and an outer listen loop instead. Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2009-10-26 Christian Beier + + * libvncclient/listen.c, libvncclient/vncviewer.c, rfb/rfbclient.h: + libvncclient: add a non-forking listen function. Forking the whole process from deep within a library call does not + really work at all with apps that use multiple threads, i.e. every + reasonably modern GUI app. So, provide a non-forking listen function + so that the caller can decide if to fork, start a thread, etc. This implementation adds a timeout parameter to be able to call the + listen function multiple times so that it's possible to do sth. else + in between, e.g. abort listening. Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2009-10-21 Christian Beier + + * client_examples/SDLvncviewer.c: SDLvncviewer: make listen mode + work _somewhat_. set the port to listen on and really ensure that the window of the + fork()ed instance is closed. works somewhat: it's now actually possible to listen for an incoming + connection and to close it again, but the second connection attempt + fails with 'XIO: fatal IO error 11 (Resource temporarily + unavailable)'. this could relate to the fact that SDL uses threads + internally and we're fork()ing here... Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2009-10-30 Christian Beier + + * libvncclient/sockets.c: libvncclient: make listenAtTCPPort() work + under windows. Actually, initSockets() has to be called everywhere we possibly use + sockets the first time. Also fix return value of initSockets(). Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2009-10-30 Alexander Dorokhine + + * libvncclient/rfbproto.c, libvncclient/vncviewer.c, + rfb/rfbclient.h: libvncclient: Add FinishedFrameBufferUpdate + callback When working on a program which searches the display for some image, + one does not want to search again without getting an FB update. Add + a callback to make this possible. + +2009-10-30 Alexander Dorokhine + + * libvncclient/sockets.c: Fix hostname resolution problems under + Windows On Windows, the WSA system needs to be initialized to be able to + look up host names. This patch also changes *addr = 0 to use the constant + INADDR_LOOPBACK instead, which seems to be required on Windows. + +2009-10-17 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, x11vnc/help.c, + x11vnc/solid.c, x11vnc/sslhelper.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: Workaround for inane + X_ShmAttach incompatibility in Xorg, -solid support in xfce, + showrfbauth option. + +2009-10-08 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvnc.1, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvncviewer.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: Synchronize ssvnc source, etc. Nearly the 1.0.24 + release... + +2009-10-08 runge + + * classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/connections.h, x11vnc/enc.h, x11vnc/help.c, + x11vnc/keyboard.c, x11vnc/options.c, x11vnc/options.h, + x11vnc/params.h, x11vnc/remote.c, x11vnc/remote.h, x11vnc/screen.c, + x11vnc/selection.c, x11vnc/selection.h, x11vnc/solid.c, + x11vnc/solid.h, x11vnc/sslcmds.c, x11vnc/sslcmds.h, + x11vnc/sslhelper.c, x11vnc/sslhelper.h, x11vnc/ssltools.h, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/unixpw.c, + x11vnc/unixpw.h, x11vnc/user.c, x11vnc/util.c, x11vnc/util.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, + x11vnc/xdamage.c, x11vnc/xdamage.h, x11vnc/xevents.c, + x11vnc/xevents.h, x11vnc/xwrappers.c: Huge number of changes, see + x11vnc/ChangeLog + +2009-10-07 runge + + * libvncclient/rfbproto.c: Some broken build environments treat + fprintf(fh, buf) as a fatal error... + +2009-10-07 runge + + * libvncserver/main.c: Some broken build environments treat + fprintf(fh, buf) as a fatal error... + +2009-10-02 Vic Lee + + * libvncclient/rfbproto.c, libvncclient/tls.c, rfb/rfbclient.h, + rfb/rfbproto.h: Add VeNCrypt support in libvncclient Signed-off-by: Vic Lee + +2009-10-02 Christian Beier + + * configure.ac, libvncclient/rfbproto.c, libvncclient/sockets.c, + rfb/rfb.h, vncterm/Makefile.am: mingw32 crosscompile fixes. SOCKET is redefined in winsock2.h so #undef it where winsock2.h is + included. The changes in rfbproto.c circumvent crosscompiler errors + like 'S_IFMT' undeclared ...', the Makefile.am changes avoid + building linux specific stuff for a win32 host target. Also added + configure option to specify sdl-config. Signed-off-by: Christian Beier + Signed-off-by: Johannes Schindelin + +2009-10-02 Johannes Schindelin + + * configure.ac: Fallback to --without-client-tls if GNUTLS could not + be found Signed-off-by: Johannes Schindelin + +2009-10-01 Vic Lee + + * configure.ac, libvncclient/Makefile.am, libvncclient/rfbproto.c, + libvncclient/sockets.c, libvncclient/tls.c, libvncclient/tls.h, + libvncclient/vncviewer.c, rfb/rfbclient.h, rfb/rfbproto.h: Add + anonymous TLS support in libvncclient Signed-off-by: Vic Lee + +2009-10-02 Johannes Schindelin + + * test/encodingstest.c: encodingstest: fix multi-threading issue Signed-off-by: Johannes Schindelin + +2009-10-02 Johannes Schindelin + + * test/encodingstest.c: encodingstest: fix whitespace Signed-off-by: Johannes Schindelin + +2009-10-02 Johannes Schindelin + + * AUTHORS: Add Christian Beier to the AUTHORS Signed-off-by: Johannes Schindelin + +2009-10-02 Christian Beier + + * libvncclient/rfbproto.c: Fix IsUnixSocket() This is a pure functionality fix: according to its manpage, stat() + returns 0 on success. Checking for a return value of zero fixes + incorrect results of IsUnixSocket(). Signed-off-by: Johannes Schindelin + +2009-09-27 Johannes Schindelin + + * AUTHORS: Add Vic Lee to the author list Signed-off-by: Johannes Schindelin + +2009-09-14 Vic Lee + + * libvncclient/rfbproto.c: Fix bug for logging unsupported security + types Signed-off-by: Vic Lee + +2009-09-14 Vic Lee + + * libvncclient/rfbproto.c: Fix bug for VNC Server version 4 Signed-off-by: Vic Lee + +2009-08-10 runge + + * x11vnc/README, x11vnc/connections.c, x11vnc/enc.h, x11vnc/help.c, + x11vnc/pointer.c, x11vnc/unixpw.c, x11vnc/unixpw.h, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: Improvements + to -unixpw_cmd and -unixpw_nis. Experimental X11VNC_WATCH_DX_DY=1 + for buggy theme menus, see: + http://ubuntuforums.org/showthread.php?t=1223490 + +2009-07-11 runge + + * prepare_x11vnc_dist.sh, x11vnc/README, x11vnc/help.c, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: Setup for x11vnc version + 0.9.9 + +2009-06-19 runge + + * classes/ssl/README, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, x11vnc/README: + Add proxyHost and proxyPort java applet params. + +2009-06-18 runge + + * classes/ssl/ss_vncviewer, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, + x11vnc/ChangeLog, x11vnc/README, + x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/README.txt, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvncviewer.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: classes/ssl: java viewer now handles auth-basic proxy + logins. misc/enhanced_tightvnc_viewer: update ssvnc. + +2009-06-16 Johannes Schindelin + + * libvncclient/vncviewer.c: Fix two issues in rfbGetClient() There was an unnecessary assignment, and an assignment of a string + that was to be free()ed later, so it has to be strdup()ed. Both issues spotted by Roman Held. Signed-off-by: Johannes Schindelin + +2009-06-14 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/screen.c, x11vnc/sslhelper.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: + X11VNC_REFLECT_PASSWORD env. var., warning about compiz, improve + single-port. + +2009-05-22 Stefan Becker + + * libvncclient/vncviewer.c: Add close() to rfbClientCleanup() Signed-off-by: Johannes Schindelin + +2009-05-21 runge + + * x11vnc/8to24.c, x11vnc/ChangeLog, x11vnc/README, + x11vnc/connections.c, x11vnc/connections.h, x11vnc/cursor.c, + x11vnc/help.c, x11vnc/keyboard.c, x11vnc/misc/turbovnc/convert, + x11vnc/options.c, x11vnc/options.h, x11vnc/rates.c, + x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/sslhelper.c, x11vnc/unixpw.c, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/util.c, x11vnc/util.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, x11vnc/xevents.c, + x11vnc/xrecord.c, x11vnc/xwrappers.c: Thread safety. Fix -clip -in + -rawfb. Try to avoid Xorg stuck key bug. + +2009-05-21 runge + + * ChangeLog, configure.ac, libvncserver/main.c, + libvncserver/rfbserver.c, libvncserver/tight.c, + libvncserver/tightvnc-filetransfer/rfbtightserver.c, + libvncserver/zlib.c, libvncserver/zrle.c, + libvncserver/zrleencodetemplate.c, rfb/rfb.h: Thread safety for + zrle, zlib, tight. Proposed tight security type fix for debian bug + 517422. + +2009-05-20 llyzs + + * rfb/rfbclient.h: Export the functions SupportsClient2Server and + SupportsServer2Client These are useful functions for VNC clients, so let's export them for + everybody to use. Signed-off-by: Johannes Schindelin + +2009-05-12 Johannes Schindelin + + * AUTHORS: Add Ben to the authors Signed-off-by: Johannes Schindelin + +2009-05-12 Johannes Schindelin + + * autogen.sh: Make autogen.sh executable Signed-off-by: Johannes Schindelin + +2009-05-12 Ben Klopfenstein + + * libvncclient/rfbproto.c, libvncclient/sockets.c, rfb/rfbclient.h: + libvncclient: Unix sockets support by Ben Klopfenstein Signed-off-by: Johannes Schindelin + +2009-03-31 runge + + * x11vnc/README, x11vnc/connections.c, x11vnc/connections.h, + x11vnc/screen.c, x11vnc/x11vnc.1, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: rebuild for x11vnc dev 0.9.8 + +2009-03-31 runge + + * prepare_x11vnc_dist.sh: x11vnc 0.9.8 dev + +2009-03-30 Johannes Schindelin + + * success.html: Add LCD4Linux to the success stories Signed-off-by: Johannes Schindelin + +2009-03-16 runge + + * x11vnc/README, x11vnc/enc.h, x11vnc/help.c, x11vnc/keyboard.c, + x11vnc/util.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: Add some -remap tricks. Limit rfbCFD message + count. + +2009-03-14 runge + + * x11vnc/8to24.c, x11vnc/8to24.h, x11vnc/README, + x11vnc/allowed_input_t.h, x11vnc/avahi.c, x11vnc/avahi.h, + x11vnc/blackout_t.h, x11vnc/cleanup.c, x11vnc/cleanup.h, + x11vnc/connections.c, x11vnc/connections.h, x11vnc/cursor.c, + x11vnc/cursor.h, x11vnc/enc.h, x11vnc/enums.h, x11vnc/gui.c, + x11vnc/gui.h, x11vnc/help.c, x11vnc/help.h, x11vnc/inet.c, + x11vnc/inet.h, x11vnc/keyboard.c, x11vnc/keyboard.h, + x11vnc/linuxfb.c, x11vnc/linuxfb.h, x11vnc/macosx.c, + x11vnc/macosx.h, x11vnc/macosxCG.c, x11vnc/macosxCG.h, + x11vnc/macosxCGP.c, x11vnc/macosxCGP.h, x11vnc/macosxCGS.c, + x11vnc/macosxCGS.h, x11vnc/misc/LICENSE, + x11vnc/misc/turbovnc/Makefile.am, x11vnc/misc/turbovnc/README, + x11vnc/misc/turbovnc/apply_turbovnc, x11vnc/misc/turbovnc/convert, + x11vnc/misc/turbovnc/convert_rfbserver, + x11vnc/misc/turbovnc/undo_turbovnc, x11vnc/options.c, + x11vnc/options.h, x11vnc/params.h, x11vnc/pm.c, x11vnc/pm.h, + x11vnc/pointer.c, x11vnc/pointer.h, x11vnc/rates.c, x11vnc/rates.h, + x11vnc/remote.c, x11vnc/remote.h, x11vnc/scan.c, x11vnc/scan.h, + x11vnc/screen.c, x11vnc/screen.h, x11vnc/scrollevent_t.h, + x11vnc/selection.c, x11vnc/selection.h, x11vnc/solid.c, + x11vnc/solid.h, x11vnc/sslcmds.c, x11vnc/sslcmds.h, + x11vnc/sslhelper.c, x11vnc/sslhelper.h, x11vnc/ssltools.h, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/uinput.c, + x11vnc/uinput.h, x11vnc/unixpw.c, x11vnc/unixpw.h, x11vnc/user.c, + x11vnc/user.h, x11vnc/userinput.c, x11vnc/userinput.h, + x11vnc/util.c, x11vnc/util.h, x11vnc/v4l.c, x11vnc/v4l.h, + x11vnc/win_utils.c, x11vnc/win_utils.h, x11vnc/winattr_t.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c, x11vnc/xdamage.c, x11vnc/xdamage.h, + x11vnc/xevents.c, x11vnc/xevents.h, x11vnc/xinerama.c, + x11vnc/xinerama.h, x11vnc/xkb_bell.c, x11vnc/xkb_bell.h, + x11vnc/xrandr.c, x11vnc/xrandr.h, x11vnc/xrecord.c, + x11vnc/xrecord.h, x11vnc/xwrappers.c, x11vnc/xwrappers.h: Insert + x11vnc copyright and license notices. + +2009-03-14 runge + + * x11vnc/README: Test git commit setting username & etc. + +2009-03-14 Karl J. Runge + + * x11vnc/README, x11vnc/help.c, x11vnc/ssltools.h, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: Tweak settings and docs for + create_display. Add FD_EXTRA finishing cmd. + +2009-03-13 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/screen.c, + x11vnc/userinput.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: Fix off-screen bug for -ncache_cr + copyrect. + +2009-03-12 dscho + + * ChangeLog, client_examples/SDLvncviewer.c: Teach SDLvncviewer + about scroll wheel events Signed-off-by: Johannes Schindelin + +2009-03-12 dscho + + * client_examples/SDLvncviewer.c: SDLvncviewer: fix passing a wrong + pointer type Signed-off-by: Johannes Schindelin + +2009-03-08 dscho + + * ChangeLog, client_examples/Makefile.am, + client_examples/SDLvncviewer.c, client_examples/scrap.c, + client_examples/scrap.h: Clipboard support for SDLvncviewer The clipboard support has only been tested on Linux so far. Signed-off-by: Johannes Schindelin + +2009-03-07 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/misc/turbovnc/Makefile.am, + x11vnc/misc/turbovnc/README, x11vnc/misc/turbovnc/apply_turbovnc, + x11vnc/misc/turbovnc/convert, + x11vnc/misc/turbovnc/convert_rfbserver, + x11vnc/misc/turbovnc/undo_turbovnc, x11vnc/scan.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/user.c, + x11vnc/user.h, x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: Allow range + for X11VNC_SKIP_DISPLAY, document grab Xserver issue. Add + progress_client() to proceed more quickly thru handshake. + Improvements to turbovnc hack. + +2009-03-07 dscho + + * ChangeLog, TODO, client_examples/SDLvncviewer.c: SDLvncviewer: + upon focus loss, force releasing the Alt keys When switching windows using the Alt+Tab shortcut, SDLvncviewer + would get the "down" event, but not the "up" event. This patch + provides a workaround. Signed-off-by: Johannes Schindelin + +2009-03-07 dscho + + * client_examples/SDLvncviewer.c: SDLvncviewer: refactor event + handling Instead of having deep indent levels, put the code to handle events + into its own function. That also helps readability. Signed-off-by: Johannes Schindelin + +2009-03-07 dscho + + * TODO: Update SDLvncviewer TODOs Signed-off-by: Johannes Schindelin + +2009-03-07 dscho + + * ChangeLog, client_examples/SDLvncviewer.c: Teach SDLvncviewer to + be resizable Using "SDLvncviewer -resizable", you make the window resizable. + This means that you can shrink the window (e.g. when you are trying + to access an x11vnc from your little netbook), or you can enlarge + it. Signed-off-by: Johannes Schindelin + +2009-03-06 dscho + + * ChangeLog, TODO, client_examples/SDLvncviewer.c: SDLvncviewer: + enable key repeat Signed-off-by: Johannes Schindelin + +2009-02-28 runge + + * configure.ac, x11vnc/ChangeLog, x11vnc/README, + x11vnc/misc/Makefile.am, x11vnc/misc/turbovnc/Makefile.am, + x11vnc/misc/turbovnc/README, x11vnc/misc/turbovnc/apply_turbovnc, + x11vnc/misc/turbovnc/convert, x11vnc/misc/turbovnc/tight.c, + x11vnc/misc/turbovnc/turbojpeg.h, + x11vnc/misc/turbovnc/undo_turbovnc: x11vnc: add kludge to experiment + with turbovnc. + +2009-02-26 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/remote.c, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc_defs.c: x11vnc: fix some -QD cases for use in + tkx11vnc. + +2009-02-22 runge + + * x11vnc/README, x11vnc/avahi.c, x11vnc/enc.h, x11vnc/selection.c: + fix some compiler warnings. + +2009-02-22 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: add -noskip_lockkeys option + for future use. + +2009-02-04 runge + + * classes/ssl/README, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/remote.c, + x11vnc/screen.c, x11vnc/selection.c, x11vnc/sslhelper.c, + x11vnc/ssltools.h, x11vnc/unixpw.c, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c, x11vnc/xwrappers.c: x11vnc: Add "sendbell" + remote cmd. Fix copyrect updates under -reflect. Workaround that + checks valid window of selection requestor. Wait on some ssl helper + pids earlier. Workaround XAUTHLOCALHOSTNAME for some new usage + modes. Set fake fb to requested bpp with correct masks. -padgeom + once:... mode. Set LIBXCB_ALLOW_SLOPPY_LOCK by default. + rfbRandomBytes earlier. classes/ssl: Update jars. Add "TOP_" + dropdown customization to ultravnc java viewer applet FTP panel. + +2009-02-03 dscho + + * test/Makefile.am: test/Makefile: use check_PROGRAMS Rather than use noinst_PROGRAMS, check_PROGRAMS will define programs + that are only compiled when someone actually runs `make check`. Signed-off-by: Mike Frysinger Signed-off-by: + Johannes Schindelin + +2009-02-03 dscho + + * ChangeLog: Record Mike's automake cleanups Signed-off-by: Johannes Schindelin + +2009-02-03 dscho + + * Makefile.am, client_examples/Makefile.am, configure.ac, + contrib/Makefile.am, examples/Makefile.am, + libvncclient/Makefile.am, libvncserver/Makefile.am, + test/Makefile.am, vncterm/Makefile.am, x11vnc/Makefile.am: clean up + build flags The flag handling (both compiler options and include paths) are a + mess at the moment. There is no point in forcing "-O2 -g" when + these are already the defaults, and if someone changes the defaults, + chances are good they don't want you clobbering their choices. The -Wall flag should be handled in configure and thrown into CFLAGS + once rather than every Makefile.am. Plus, this way we can control + which compilers the flag actually gets used with. Finally, the INCLUDES variable is for -I paths, not AM_CFLAGS. Nor + should it contain -I. as this is already in the default includes + setup. Signed-off-by: Mike Frysinger Signed-off-by: + Johannes Schindelin + +2009-02-03 dscho + + * configure.ac: configure: use _cv_ in cache var name Newer autoconf fails if _cv_ is not in the cache var name. Signed-off-by: Mike Frysinger Signed-off-by: + Johannes Schindelin + +2009-02-03 dscho + + * configure.ac: configure: use AM_PROG_CC_C_O Newer automakes error out due to per-file CFLAGS being used unless + the macro AM_PROG_CC_C_O is set in configure.ac. [jes: The macro AM_PROG_CC_C_O has been around since 1999, so it + should be safe.] Signed-off-by: Mike Frysinger Signed-off-by: + Johannes Schindelin + +2009-02-03 dscho + + * autogen.sh: autogen.sh: run with set -e If any autotool command fails, we want to abort, not keep running. + Otherwise, errors in say a Makefile.am will be missed as the + automake failure gets ignored and then lost in the noise. Signed-off-by: Mike Frysinger Signed-off-by: + Johannes Schindelin + +2009-01-12 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvnc.1, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvncviewer.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: SSVNC 1.0.22 release (+ a little bit more). crl lists, + ssh pid finding improvements, and more. + +2009-01-12 runge + + * CMakeLists.txt, ChangeLog, configure.ac: configure.ac, + CMakeLists.txt: set LibVNCServer version to 0.9.7 + +2009-01-12 runge + + * classes/ssl/README, classes/ssl/ss_vncviewer, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: classes/ssl: Add configurable Ultra java + applet Filexfer Drives drop down (e.g. + ftpDropDown=Home.Desktop.bin). Document all applet parameters in + classes/ssl/README. + +2009-01-11 runge + + * ChangeLog: Forgot ChangeLog + +2009-01-11 runge + + * prepare_x11vnc_dist.sh: prepare_x11vnc_dist.sh: fix SUBDIRS and + DIST_SUBDRIS when using --with-system-libvncserver + +2009-01-10 runge + + * x11vnc/8to24.c, x11vnc/ChangeLog, x11vnc/README, x11vnc/screen.c, + x11vnc/selection.c, x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c, + x11vnc/xrecord.c: x11vnc: fix failure of -8to24 on default depth 24 + due to nonstandard indexed color support changes. Fix small window + for failure after XSendEvent selection call; add env var. + X11VNC_SENDEVENT_SYNC=1 to take even more care. + +2009-01-04 runge + + * x11vnc/README, x11vnc/avahi.c, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/connections.h, x11vnc/enc.h, + x11vnc/gui.c, x11vnc/scan.c, x11vnc/screen.c, x11vnc/solid.c, + x11vnc/sslhelper.c, x11vnc/x11vnc.c, x11vnc/xwrappers.c: x11vnc: fix + compiler warnings. + +2009-01-04 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/help.c, x11vnc/linuxfb.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/pointer.c, + x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/sslhelper.c, x11vnc/v4l.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xwrappers.c: x11vnc: + add -rmflag option, -rawfb vt support, bpp < 8 support for rawfb, + find /dev/video better. Fix reverse SSL connection for DH. Some + improvements for CUPS TS helper, restart if needed. + +2009-01-04 runge + + * configure.ac, prepare_x11vnc_dist.sh: configure.ac: add include + file file for libXrandr on Solaris. prepare_x11vnc_dist.sh: set + version to 0.9.7 + +2008-12-10 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/options.c, x11vnc/options.h, x11vnc/params.h, + x11vnc/remote.c, x11vnc/sslhelper.c, x11vnc/ssltools.h, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/util.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: 0.9.6 release. Some + strtok bugfixes. rename -tlsvnc to -anontls. Disable ssl caching. + No cert creation prompting in inetd or bg modes. waitpid a bit more + carefully on ssl helpers. Tune ssl initial timeouts. Let -create + user specify starting X display. fix -rfbport prompt gui for older + tk. -sslonly option. Error if no -ssl with related options. -rand + option. -ssl implies -ssl SAVE + +2008-11-22 runge + + * classes/ssl/ss_vncviewer: Update ss_vncviewer... + +2008-11-22 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvnc.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/stunnel-maxconn.pa + tch, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch, x11vnc/misc/enhanced_tightvnc_viewer/ssvnc.desktop: SSVNC + sync: stunnel upgrade and patch, change wish order, -anondh -ciphers + option VeNCrypt and TLSVNC support (in pproxy and unix vncviewer). + Help text tweaks -killstunnel, s_client fixes, No Encryption easier. + Zeroconf/avahi support. tk font fixes. SSVNC_ULTRA_FTP_JAR finding + SSVNC_PREDIGESTED_HANDSHAKE SSVNC_SKIP_RFB_PROTOCOL_VERSION, + SSVNC_SET_SECURITY_TYPE, etc hacks. + +2008-11-22 runge + + * x11vnc/ChangeLog, x11vnc/Makefile.am, x11vnc/README, + x11vnc/avahi.c, x11vnc/cleanup.c, x11vnc/connections.c, + x11vnc/gui.c, x11vnc/help.c, x11vnc/options.c, x11vnc/options.h, + x11vnc/params.h, x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/sslcmds.c, x11vnc/sslhelper.c, x11vnc/sslhelper.h, + x11vnc/ssltools.h, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/unixpw.c, x11vnc/unixpw.h, x11vnc/userinput.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.desktop, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xdamage.c, + x11vnc/xdamage.h, x11vnc/xevents.c, x11vnc/xrecord.c, + x11vnc/xrecord.h, x11vnc/xwrappers.c: x11vnc: x11vnc.desktop file. + -reopen, -dhparams, -sslCRL, -setdefer options. -rfbport PROMPT + VeNCrypt and TLSVNC SSL/TLS encryption support. Tweaks to + choose_delay() algorithm. -ssl ANON anonymouse Diffie-Hellman mode. + Fix bugs in certs management. Additions to tray=setpass naive user + mode. + +2008-11-05 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/avahi.c, + x11vnc/cleanup.c, x11vnc/cleanup.h, x11vnc/help.c, + x11vnc/macosxCG.c, x11vnc/rates.c, x11vnc/remote.c, + x11vnc/screen.c, x11vnc/solid.c, x11vnc/sslhelper.c, + x11vnc/ssltools.h, x11vnc/userinput.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, + x11vnc/xevents.c: x11vnc: add zeroconf external helpers + (avahi-publish and dns-sd). Alias -zeroconf. Close pipeinput_fh on + exit. Kludge to make -solid work on MacOSX console. Attempt at cpp + macros to disable newer libvncserver interfaces. + +2008-11-05 runge + + * configure.ac: Tweak messages. Add shmat for --without-x building. + +2008-10-30 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvncviewer.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: synchronize ssvnc + +2008-10-29 runge + + * prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/README, + x11vnc/help.c, x11vnc/nox11.h, x11vnc/remote.c, x11vnc/screen.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, x11vnc/xevents.c: x11vnc: + -http_oneport for single port HTTP and VNC. Improve find_display wrt + lsof blocking with -b. + +2008-10-19 runge + + * + x11vnc/misc/enhanced_tightvnc_viewer/bin/Darwin.Power.Macintosh/vnc + viewer.sh, x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvncviewer.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: Sync SSVNC changes: fullscreen fixes, local scaling, + -chatonly, iso-8859-1/utf8 etc., etc. + +2008-10-19 runge + + * classes/ssl/ss_vncviewer, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch: Update ssl VNC + viewer jars and patch file. + +2008-10-19 runge + + * x11vnc/8to24.c, x11vnc/ChangeLog, x11vnc/README, + x11vnc/cleanup.c, x11vnc/connections.c, x11vnc/connections.h, + x11vnc/cursor.c, x11vnc/enc.h, x11vnc/help.c, x11vnc/keyboard.c, + x11vnc/linuxfb.c, x11vnc/options.c, x11vnc/options.h, + x11vnc/remote.c, x11vnc/scan.c, x11vnc/scan.h, x11vnc/screen.c, + x11vnc/screen.h, x11vnc/selection.c, x11vnc/solid.c, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/unixpw.c, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xevents.c, + x11vnc/xinerama.c, x11vnc/xrandr.c, x11vnc/xrandr.h, + x11vnc/xrecord.c, x11vnc/xwrappers.c, x11vnc/xwrappers.h: x11vnc: + -chatwindow, -scale WxH, -enc changes. + +2008-09-21 runge + + * prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/Makefile.am, + x11vnc/README, x11vnc/enc.h, x11vnc/help.c, x11vnc/keyboard.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/pointer.c, + x11vnc/screen.c, x11vnc/sslhelper.c, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/util.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: Add symmetric key encryption -enc + cipher:keyfile, works with SSVNC. Make -remap work on MacOSX + console. update to 0.9.5 strings. Add a couple menu items to + tkx11vnc. + +2008-09-17 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/sslhelper.c, x11vnc/x11vnc.1, + x11vnc/x11vnc_defs.c: x11vnc: make -allow work in -ssl mode. + +2008-09-14 runge + + * classes/ssl/ss_vncviewer, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/gui.c, x11vnc/help.c, + x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvnc.1, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvncviewer.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch, x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/userinput.c, x11vnc/util.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: + -sleepin m-n for random sleep. More mktemp and mkstemp protections. + SSL_INIT_TIMEOUT=n env. var. Fix macosx console X call bug. + Synchronize other projects sources. + +2008-09-07 runge + + * classes/ssl/ss_vncviewer, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, x11vnc/8to24.c, + x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/gui.c, x11vnc/gui.h, x11vnc/help.c, x11vnc/keyboard.c, + x11vnc/macosxCG.c, x11vnc/macosxCG.h, + x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/sshvnc.bat, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/tsvnc.bat, + x11vnc/misc/enhanced_tightvnc_viewer/bin/sshvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/tsvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvnc.1, + x11vnc/misc/enhanced_tightvnc_viewer/man/man1/ssvncviewer.1, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_getpatches, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch, x11vnc/options.c, x11vnc/options.h, x11vnc/pointer.c, + x11vnc/remote.c, x11vnc/solid.c, x11vnc/ssltools.h, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xevents.c, + x11vnc/xevents.h, x11vnc/xinerama.c, x11vnc/xinerama.h: x11vnc: kill + gui_pid on exit in -connect/-connect_or_exit mode. -grablocal n + experiment (not compiled by default). -macuskbd option for macosx + for orig uskdb code. keycode=N remote contol cmd. Find dpy look at + non-NFS cookies in /tmp. Fix gui tray insertion on recent gnome dt. + Fix connect_file bug. Sync SSVNC + +2008-06-24 runge + + * libvncserver/rfbserver.c: We seem to need to guard against freeing + iterator 'i' twice in rfbSendFramebufferUpdate() (italc reported + bug) + +2008-06-07 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/unixpw.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, + x11vnc/xinerama.c: x11vnc: -clip xineramaN option, -DIGNORE_GETSPNAM + for HP-UX. Print info on SSH_CONNECTION override. + +2008-06-03 dscho + + * ChangeLog, client_examples/SDLvncviewer.c: SDLvncviewer: update + screen correctly after a resize Signed-off-by: Johannes Schindelin + +2008-06-03 runge + + * configure.ac: Enable --with-ssl=DIR option. + +2008-06-01 runge + + * x11vnc/README, x11vnc/options.c, x11vnc/options.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: + lower waitms and defer if framebuffer reads are fast (> 100MB/s) + +2008-06-01 runge + + * x11vnc/8to24.c, x11vnc/ChangeLog, x11vnc/README, + x11vnc/connections.c, x11vnc/cursor.c, x11vnc/help.c, + x11vnc/misc/Xdummy, x11vnc/options.c, x11vnc/options.h, + x11vnc/scan.c, x11vnc/screen.c, x11vnc/userinput.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, + x11vnc/xinerama.c: x11vnc: support colormaps for depths other than + 8. xinerama warppointer only if more than one subscreen. + +2008-05-31 dscho + + * .gitignore: .gitignore: ignore also temporary editor files Signed-off-by: Johannes Schindelin + +2008-05-31 dscho + + * VisualNaCro/.gitignore: VisualNaCro: add .gitignore file Signed-off-by: Johannes Schindelin + +2008-05-31 dscho + + * VisualNaCro/configure.ac: VisualNaCro: fix configure.ac There was a misunderstanding as to the workings of AC_CHECK_PROG(). Signed-off-by: Johannes Schindelin + +2008-05-31 dscho + + * TODO: Update TODOs Signed-off-by: Johannes Schindelin + +2008-05-31 dscho + + * libvncserver-config.in: Fix libvncserver-config for in-place + operation Since quite some time, the linkable libraries are stored in the + .libs/ subdirectories. Adjust libvncserver-config to account for + that when running without installing. Signed-off-by: Johannes Schindelin + +2008-05-23 runge + + * libvncserver/rfbserver.c: Handle colormaps with more than 256 + colors. + +2008-05-13 dscho + + * examples/mac.c: examples/mac: disable the cursor We cannot write access the frame buffer, and we do not have a + sensible cursor anyway, so better disable the cursor (which would + have to be drawn for clients that do not support + CursorShapeUpdates). Signed-off-by: Johannes Schindelin + +2008-05-13 dscho + + * client_examples/SDLvncviewer.c: SDLvncviewer: add -viewonly Just like its siblings from other projects, SDLvncviewer now + supports viewonly connections. Signed-off-by: Johannes Schindelin + +2008-05-12 runge + + * x11vnc/README, x11vnc/help.c, x11vnc/selection.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/x11vnc.1, + x11vnc/x11vnc_defs.c: x11vnc: SSL fixes. Increase cert lifetimes to + 2 years. Print ssl err msg. + +2008-05-12 runge + + * configure.ac: Add X509_print_ex_fp check for x11vnc. + +2008-05-12 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/connect_br.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: Many improvement to the frontend and unix viewer. + UltraVNC proxy support, and other proxy improvements. + +2008-05-08 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/gui.c, x11vnc/help.c, x11vnc/options.c, x11vnc/scan.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/user.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: add UltraVNC repeater proxy support. + fix to setp gui mode. -threads is now strongly discouraged. Read + PORT= in url. User can set nolisten for Xvfb in -create mode. + clean up wait_for_client() to some degree. + +2008-05-08 runge + + * classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch: Add check for + "https" to viewers. update jars. + +2008-04-28 dscho + + * rfb/rfbclient.h: Fix compilation in the absence of libjpeg The JPEG library is not necessarily installed everywhere, and + sometimes it is outright undesirable to compile with JPEG support, + e.g. when the server is not very fast. So fix the compilation for + that case. Signed-off-by: Johannes Schindelin + +2008-03-21 dscho + + * TODO: Update TODOs Signed-off-by: Johannes Schindelin + +2008-02-18 dscho + + * ChangeLog, libvncserver/rfbregion.c: Please MS Visual C++ a bit + (Christian Ehrlicher) Signed-off-by: Johannes Schindelin + +2008-02-18 runge + + * classes/ssl/ss_vncviewer, x11vnc/README: Update ssl jars. + +2008-02-18 runge + + * x11vnc/README, x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: changes for + release + +2008-02-18 runge + + * x11vnc/README, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: minor date changes. + +2008-02-18 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: ssvnc sync with zywrle support and improvements to popup. + +2008-02-04 dscho + + * ChangeLog, libvncclient/rfbproto.c, libvncclient/zrle.c: ZYWRLE + patch for libvncclient (thanks Noriaki Yamazaki) Highlite: * use qualityLevel/zlib_buffer. No new variable is needed. * Change coding style to recursive fashion. * Change meaning of qualityLevel== 9 for easy calc zywrle_level: old:zywrle_level== 1 new:disable ZYWRLE(same as ZRLE) so, we should not use this value for compatible reason. * Color mode handling isn't complete. I provided and checked 16 bit colors(RGB555,RGB565) and some color mode of 32 bit colors for little endian mode. we must make and check 24 bit colors and big endian mode. Signed-off-by: Johannes Schindelin + +2008-02-04 dscho + + * ChangeLog, libvncserver/zywrletemplate.c: Fix ZYWRLE en/decoding + for width != scanline (thanks Noriaki Yamazaki) Signed-off-by: Johannes Schindelin + +2008-02-03 runge + + * libvncserver/stats.c: Add ZYWRLE to server printout. + +2008-02-02 dscho + + * ChangeLog, TODO, client_examples/SDLvncviewer.c: SDLvncviewer: fix + button handling For some reason, I swapped buttons 2 and 3 on Dec 7, 2005, in commit + "translate keys based on unicode (much more reliable than sym)". I + do not remember why, nor what I smoked, but this was wrong. Signed-off-by: Johannes Schindelin + +2008-02-02 dscho + + * TODO, client_examples/SDLvncviewer.c: SDLvncviewer: fix + Ctrl+ Signed-off-by: Johannes Schindelin + +2008-02-02 dscho + + * TODO, client_examples/SDLvncviewer.c: SDLvncviewer: fix + translation of the Tab key Signed-off-by: Johannes Schindelin + +2008-02-02 dscho + + * TODO: Updated TODOs Signed-off-by: Johannes Schindelin + +2008-02-01 runge + + * libvncserver/Makefile.am: Need to include zywrletemplate.c in + Makefile.am + +2008-02-01 runge + + * classes/ssl/ss_vncviewer: sync java viewer. + +2008-02-01 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch, x11vnc/rates.c, x11vnc/ssltools.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c: x11vnc: during speeds + estimate, guard against client disconnecting. + +2008-01-31 dscho + + * libvncserver/rfbserver.c: Fix rfbSendSupportedEncodings There was a long standing TODO to make the counting of the supported + encodings dynamic. It never triggered, until ZYWRLE was added. Noticed by Christian Ehrlicher. Signed-off-by: Johannes Schindelin + +2008-01-31 dscho + + * Makefile.am, configure.ac: Recurse into subdirectory x11vnc/ when + configuring with --with-x11vnc Since we separated the packages LibVNCServer and x11vnc, there is a + configure switch --with-x11vnc, without which x11vnc is not built. However, even _with_ this switch, it is not built, because the + Makefile would not recurse into the x11vnc/ subdirectory. Fix that. Signed-off-by: Johannes Schindelin + +2008-01-31 dscho + + * libvncserver/rfbserver.c: Fix Swap16IfLE() on bytes When swapping the values for the colour table to little-endian + (because they are 16-bit values), we need to cast "unsigned char" to + "unsigned short"; otherwise, Microsoft's compiler would keep + complaining. Noticed by Christian Ehrlicher. Signed-off-by: Johannes Schindelin + +2008-01-31 dscho + + * libvncserver/rfbserver.c, rfb/rfb.h: Move tightQualityLevel out of + the JPEG specific part The variable tightQualityLevel is used for ZYWRLE compression, too, + so if libjpeg is not present, but libz is, we still need to have + that struct member. Signed-off-by: Johannes Schindelin + +2008-01-30 dscho + + * libvncserver/zrle.c, libvncserver/zrleencodetemplate.c, rfb/rfb.h: + Make ZYWRLE thread-safe for multiple clients ZYWRLE used a static buffer, which does not work too well if you + have more than one client in a threaded server. Instead, we have + the data in the client structure now. Signed-off-by: Johannes Schindelin + +2008-01-30 dscho + + * libvncserver/zrle.c, libvncserver/zywrletemplate.c: ZYWRLE brown + paper bag fix While adjusting the coding style, three stupid mistakes happened. + The quality is _not_ just 1, 2, 3, but really 1, 3, 2. And the + macros ZYWRLE_PACK_COEFF() and ZYWRLE_UNPACK_COEFF() expand to more + than one statement, which means that we need curly brackets around + them when they are in an if clause. Signed-off-by: Johannes Schindelin + +2008-01-29 dscho + + * TODO: Update TODOs Signed-off-by: Johannes Schindelin + +2008-01-29 dscho + + * .gitignore: Add a .gitignore file At least one developer (me) uses git to work on local branches, and + this file does not hurt. Signed-off-by: Johannes Schindelin + +2008-01-29 dscho + + * ChangeLog, libvncserver/rfbserver.c: Add missing #include + (thanks Christian Ehrlicher) Signed-off-by: Johannes Schindelin + +2008-01-29 dscho + + * AUTHORS, ChangeLog, libvncserver/rfbserver.c, + libvncserver/scale.c, libvncserver/zrle.c, + libvncserver/zrleencodetemplate.c, libvncserver/zywrletemplate.c, + rfb/rfbproto.h: Add ZYWRLE server-side support (thanks Noriaki + Yamazaki, Hitachi) Signed-off-by: Johannes Schindelin + +2008-01-29 dscho + + * AUTHORS, CMakeLists.txt, ChangeLog, configure.ac, + rfb/rfbconfig.h.cmake, rfb/rfbint.h.cmake: Add CMake support (thanks + to Christian Ehrlicher) Signed-off-by: Johannes Schindelin + +2008-01-15 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/scan.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: -ping option, fix memory corruption in + copy_tiles after xrandr resize. + +2007-12-16 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, x11vnc/gui.c, + x11vnc/macosxCG.c, x11vnc/remote.c, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: setup remote-ctrl file by default on + macosx. improve tkx11vnc wrt attaching to existing server in + icon/tray mode. + +2007-12-16 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: Fixes for MacOSX 10.5. Improve usage of x11 viewer on + macosx. + +2007-12-16 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/keyboard.c, + x11vnc/macosxCG.c, x11vnc/macosxCGS.c, x11vnc/ssltools.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: fix + find_display and usleep() prototype on macosx. -display console and + check DISPLAY /tmp/...:0 on macosx. implement -noxinerama. + +2007-11-13 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, x11vnc/help.c, + x11vnc/keyboard.c, x11vnc/keyboard.h, x11vnc/options.c, + x11vnc/remote.c, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: add + clear_locks (Caps_Lock, etc) action. + +2007-10-27 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/connect_br.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle: ssvnc + sync: connect_br.tcl socks4/5 http proxies, ss_vncviewer socks5 + proxy. ssh 1st proxy. whatismyip.com fix. 127.0.0.1 on Darwin + +2007-10-27 runge + + * classes/ssl/ss_vncviewer: ssl java and ss_vncviewer (socks5) sync. + +2007-10-27 runge + + * prepare_x11vnc_dist.sh, x11vnc/8to24.c, x11vnc/ChangeLog, + x11vnc/README, x11vnc/cleanup.c, x11vnc/connections.c, + x11vnc/help.c, x11vnc/keyboard.c, x11vnc/macosxCGP.c, + x11vnc/macosxCGS.c, x11vnc/options.c, x11vnc/options.h, + x11vnc/remote.c, x11vnc/screen.c, x11vnc/selection.c, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/util.c, x11vnc/win_utils.c, + x11vnc/winattr_t.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c, x11vnc/xrecord.c: x11vnc: -proxy, -ssh + options. ncache bug in -8to24, Selection "targets" bugfix. + +2007-10-04 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, + x11vnc/ssltools.h, x11vnc/user.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: add xfce to createdisplay + +2007-09-26 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/ssltools.h, x11vnc/user.c, x11vnc/util.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: x11vnc: COLUMNS=256 and other fixes to + find/create scripts. More ratecheck. + +2007-09-17 dscho + + * libvncserver/rfbserver.c: Avoid misaligned access on 64-bit + machines We used to assume that a char[256] is properly aligned to be cast to + an rfbServerInitMsg, but that was not the case. So use a union + instead. Noticed by Flavio Leitner. Signed-off-by: Johannes Schindelin + +2007-09-11 runge + + * classes/ssl/ss_vncviewer, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch: update + ss_vncviewer script, jars, and patch files. + +2007-09-11 runge + + * x11vnc/ChangeLog, x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/README.txt, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle: ssvnc: + sshvnc ssh-only, tsvnc Terminal Services modes. Improvements to + ss_vncviewer. Automatically find X dpy and X login. Reorganize + menus a bit. ~/.ssvncrc file. + +2007-09-11 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/cursor.c, x11vnc/help.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/screen.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c, x11vnc/xrecord.c, x11vnc/xwrappers.c: x11vnc: + fix wireframe crash under -clip. Add -redirect for VNC redir. + -rawfb nullbig, randbig, solid, swirl, etc. FD_XDM mode to + find_display. -listdpy. Add enlightenment. Xvnc.redirect + FINDDISPLAY-vnc_redirect. -xvnc, -xvnc_redirect, -svc_xvnc. + AUTO_PORT. + +2007-09-05 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, + x11vnc/keyboard.c, x11vnc/misc/Xdummy, x11vnc/options.c, + x11vnc/options.h, x11vnc/remote.c, x11vnc/screen.c, x11vnc/solid.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xevents.c, + x11vnc/xevents.h, x11vnc/xrandr.c, x11vnc/xwrappers.c: x11vnc: + -autoport, -finddpy, -xdummy. watch xrandr events. + check_redir_services() utilities for Terminal services. Improve + Xdummy. + +2007-09-05 runge + + * ChangeLog, classes/ssl/Makefile.am, classes/ssl/proxy.vnc, + classes/ssl/ss_vncviewer, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + classes/ssl/ultraproxy.vnc, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch: classes/ssl: + improve timeouts, port fallback, and connection time. + +2007-08-19 runge + + * x11vnc/README, x11vnc/help.c, x11vnc/keyboard.c, x11vnc/x11vnc.1: + malloc score_hint and make it shorts to save space. + +2007-08-19 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, + x11vnc/keyboard.c, x11vnc/ssltools.h, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: x11vnc: better -xkb + tie-breaking for up keystrokes. Add Xsrv/FD_XSRV custom server to + FINDCREATEDISPLAY list. + +2007-08-18 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/solid.c, + x11vnc/ssltools.h, x11vnc/user.c, x11vnc/x11vnc.1, + x11vnc/x11vnc_defs.c: x11vnc: improve FINDCREATEDISPLAY (-create) + script, FD_GEOM, FD_SESS, FD_OPTS, FD_PROG env vars, add Xvnc + support + +2007-08-16 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: x11vnc: add reverse -connect + support to -display WAIT:, fix SSL Fetch cert only for -display + WAIT: + +2007-08-14 dscho + + * AUTHORS, ChangeLog, libvncclient/rfbproto.c: LibVNCClient: if the + GotRect hook is set, override default op. + +2007-08-04 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/remote.c, x11vnc/solid.c, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c, x11vnc/xevents.c: x11vnc: -xrefresh, + .DCOPserver bug, -unixpw_unsafe ignores SSH tunnel. + +2007-08-04 runge + + * libvncclient/vncviewer.c: argv > 0 doesn't make sense for a + pointer; assuming argv != NULL. + +2007-07-05 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/remote.c, x11vnc/scan.c, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/userinput.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: -debug_ncache, fix + big fonts in tkx11vnc. + +2007-07-05 runge + + * configure.ac, prepare_x11vnc_dist.sh: configure.ac check for + external system libvncserver version. set x11vnc version 0.9.3 + +2007-06-18 runge + + * x11vnc/README, x11vnc/options.c, x11vnc/x11vnc.1, + x11vnc/x11vnc_defs.c: x11vnc: set NCACHE -1 for release. + +2007-06-15 runge + + * ChangeLog, classes/ssl/ultra.vnc, classes/ssl/ultrasigned.vnc, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, configure.ac, + x11vnc/ChangeLog, x11vnc/README, + x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/Darwin.Power.Macintosh/vnc + viewer.sh, x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch, x11vnc/options.c, x11vnc/options.h, x11vnc/scan.c, + x11vnc/sslhelper.c, x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c, + x11vnc/xevents.c: x11vnc: fix build error if libssl is missing or + --without-ssl supplied. + +2007-05-27 runge + + * + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: sync ssvnc unix viewer diffs; fix X cursor size. + +2007-05-27 runge + + * classes/ssl/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: update java viewer and ssvnc. + +2007-05-27 runge + + * configure.ac, x11vnc/README: configure.ac: fix x11vnc + --with-system-libvncserver build and add -R link flag. + +2007-05-27 runge + + * libvncserver-config.in: Fix --libs, echo -n doesn't work + everywhere. Question: why -R only for Solaris?? + +2007-05-27 runge + + * x11vnc/Makefile.am: clobbered x11vnc/Makefile.am by mistake. + +2007-05-27 runge + + * ChangeLog, Makefile.am, configure.ac, prepare_x11vnc_dist.sh, + x11vnc/README: configure: make more of a split between libvncserver + and x11vnc pkgs. + +2007-05-26 runge + + * prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/README, + x11vnc/help.c, x11vnc/options.c, x11vnc/unixpw.c, x11vnc/x11vnc.1, + x11vnc/x11vnc_defs.c: x11vnc: in -unixpw, initial Escape means no + echo username. + +2007-05-22 runge + + * classes/ssl/ss_vncviewer: update regular SSL viewer jars; update + ss_vncviewer script. + +2007-05-22 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: update ssvnc (SSVNC_EXTRA_SLEEP), and unix viewer (1/n + menu and chat windows) + +2007-05-22 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/options.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: set + things up (NCACHE = -1) to not have -ncache on by default. + +2007-05-19 runge + + * classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch, + libvncserver/rfbserver.c, x11vnc/README, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: More fixes to ultra java + viewer, ultrafilexfer debugging output, fix -loop in .x11vncrc case. + +2007-05-17 runge + + * libvncserver/tightvnc-filetransfer/rfbtightserver.c: Pre-C99 + declaration error. + +2007-05-17 runge + + * libvncserver/rfbserver.c: In rfbSendFileTransferChunk() check + permitFileTransfer 1st to avoid false alarms. + +2007-05-16 runge + + * prepare_x11vnc_dist.sh: Add UltraViewerSSL.jar, etc. to dist list. + +2007-05-16 runge + + * libvncserver/tightvnc-filetransfer/handlefiletransferrequest.c, + libvncserver/tightvnc-filetransfer/rfbtightserver.c: Add logging + output to know when inside tightvnc-filetransfer functions. + +2007-05-16 runge + + * classes/ssl/Makefile.am, classes/ssl/README, + classes/ssl/ss_vncviewer, classes/ssl/ultra.vnc, + classes/ssl/ultrasigned.vnc, + classes/ssl/ultravnc-102-JavaViewer-ssl-etc.patch: Add SSL support + to UltraVNC Java Viewer (has filetransfer gui). Fix UltraVNC bugs + and improve FTP gui a bit. + +2007-05-16 runge + + * x11vnc/ChangeLog, x11vnc/README, + x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/sslhelper.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: ssvnc: SOCKS support, PORT=, Verify all Certs + and accepted certs logging. x11vnc SSL debugging output. + +2007-05-16 runge + + * libvncserver/rfbserver.c: Drop client if UltraVNC filetransfer is + not enabled. + +2007-05-07 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle: ssvnc: + Home dir changing, skip enc warning, memory stick doc. + +2007-05-07 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/options.c, + x11vnc/sslhelper.c, x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c, + x11vnc/xevents.c: x11vnc: lower -wait and -defer to 20ms. Drop + client doing ultravnc stuff in -unixpw during login phase. + +2007-05-05 runge + + * x11vnc/README, x11vnc/connections.c, x11vnc/help.c, + x11vnc/remote.c, x11vnc/sslhelper.c, x11vnc/unixpw.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/xevents.c: filexfer + warnings and messages. + +2007-05-05 runge + + * configure.ac, x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/user.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c: x11vnc: add + groups handling for -users mode. + +2007-05-04 runge + + * x11vnc/README, x11vnc/help.c, x11vnc/ssltools.h, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: x11vnc: add WAITBG=1 env. + var, add mwm to -create. + +2007-05-01 runge + + * classes/ssl/Makefile.am, classes/ssl/onetimekey, + classes/ssl/ss_vncviewer, x11vnc/ChangeLog, x11vnc/README, + x11vnc/connections.c, x11vnc/help.c, x11vnc/sslhelper.c, + x11vnc/ssltools.h, x11vnc/user.c, x11vnc/x11vnc.1, + x11vnc/x11vnc_defs.c: ssl: java viewer patches, onetimekey; x11vnc + setsid/setpgrp and -cc 4 for -create + +2007-04-28 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch, x11vnc/options.c, x11vnc/options.h, x11vnc/sslhelper.c, + x11vnc/sslhelper.h, x11vnc/ssltools.h, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: + -users sslpeer= option. RFB_SSL_CLIENT_CERT, -ncache 10 default + +2007-04-19 runge + + * prepare_x11vnc_dist.sh, x11vnc/README, x11vnc/x11vnc.1, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c: x11vnc: set to next release + (0.9.1) + +2007-04-19 runge + + * + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: Add latest vncviewer patch. + +2007-04-19 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/stunnel-server.conf, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle: Sync with + SSVNC 1.0.15 + +2007-04-18 runge + + * x11vnc/README, x11vnc/userinput.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c: x11vnc: small changes for 0.9 + release. + +2007-04-08 runge + + * prepare_x11vnc_dist.sh: change x11vnc version to 0.9 + +2007-04-07 dscho + + * configure.ac: prepare for release of LibVNCServer 0.9 + +2007-04-07 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, + x11vnc/ssltools.h, x11vnc/user.c, x11vnc/userinput.c, + x11vnc/x11vnc.1: x11vnc: add gnome, kde, etc. FINDCREATEDISPLAY + tags. + +2007-04-07 runge + + * classes/ssl/ss_vncviewer, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch: update + viewer jars and ss script + +2007-04-07 runge + + * x11vnc/README, x11vnc/connections.c, x11vnc/help.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/v4l.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: java + ingoreProxy, fix old libssl free_func problem + +2007-04-06 dscho + + * AUTHORS, ChangeLog, rfb/rfbclient.h: rfbclient.h: use 'extern "C"' + to make it convenient to include from C++ + +2007-04-06 dscho + + * AUTHORS, ChangeLog, rfb/rfb.h: rfb.h: Do not misplace guards This buglet made it impossible to double include rfb.h from C++. + +2007-03-30 dscho + + * prepare_x11vnc_dist.sh: build x11vnc with static libraries (at + least for now) Maybe at a later stage, we want x11vnc to pick up on existing + libvncserver.so and libvncclient.so, but right now, x11vnc and the + libraries progress together (and thus it is better to build static, + necessarily up-to-date libraries for x11vnc). + +2007-03-30 dscho + + * AUTHORS, ChangeLog, acinclude.m4, client_examples/Makefile.am, + configure.ac, contrib/Makefile.am, examples/Makefile.am, + libvncclient/Makefile.am, libvncserver/Makefile.am, ltmain.sh, + test/Makefile.am, vncterm/Makefile.am, x11vnc/Makefile.am: Build + shared libraries per default Thanks to Guillaume Rousse, we now use libtool to build shared + libraries. + +2007-03-25 runge + + * x11vnc/README, x11vnc/pm.c, x11vnc/scan.c, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/xevents.c: x11vnc: remove build errors, + get -ncache working on macosx again. + +2007-03-24 runge + + * libvncserver/cursor.c: Fix short vs. char problem with X cursors. + Have fg == bg == 0 imply interpolation to B&W. + +2007-03-24 runge + + * classes/ssl/ss_vncviewer, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch: reverse + connections for ss_vncviewer. java one-time-keys. + +2007-03-24 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/screen.c, x11vnc/sslhelper.c, + x11vnc/sslhelper.h, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/user.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: reverse SSL connections. -sleepin + option. + +2007-03-24 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: reverse (listening) VNC connections. + +2007-03-20 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/README.txt, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: ssvnc: sync to 1.0.13 release. + +2007-03-20 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cursor.c, x11vnc/help.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/remote.c, + x11vnc/sslhelper.c, x11vnc/user.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: -httpsredir, + x11cursor fix, nc=N login opt, no -ncache betatest for java viewer. + +2007-03-20 runge + + * ChangeLog, libvncserver/httpd.c: Add "Connection: close" to HTTP + replies. + +2007-03-17 dscho + + * AUTHORS, ChangeLog, libvncserver/main.c, libvncserver/rfbserver.c: + Fix a locking problem in libvncserver There seems to be a locking problem in libvncserver, with respect to + how condition variables are used. On certain machines in our lab, when using a vncviewer to view a + display that has a very high rate of updates, we will occasionally + see the VNC server process crash. In one stack trace that was + obtained, an assertion had tripped in glibc's pthread_cond_wait, + which was called from clientOutput. Inspection of clientOutput suggests that WAIT is being called + incorrectly. The mutex that protects a condition variable should + always be locked when calling wait, and on return from the wait will + still be locked. The attached patch fixes the locking around this + condition variable, and one other that I found by grepping the + source for similar occurrences. Signed-off-by: Charles Coffing + +2007-03-13 runge + + * + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: ssvnc: sync src/patches/tight-vncviewer-full.patch + +2007-03-13 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/scan.c, + x11vnc/screen.c, x11vnc/solid.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: fix crash for kde dcop. limit ncache + beta tester to 96MB viewers. + +2007-02-19 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/Windows/README.txt, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_getpatches, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: ssvnc: more fixes for painting problems. + +2007-02-19 runge + + * x11vnc/README, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: fix -users bob= in -inetd mode. + +2007-02-19 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: store 1.0.12 snapshot. + +2007-02-19 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, x11vnc/xevents.c: x11vnc: Get + ultravnc textchat working with ssvnc. + +2007-02-17 runge + + * x11vnc/README, x11vnc/help.c, x11vnc/sslhelper.c, x11vnc/x11vnc.1: + x11vnc: make https fetch in accept_openssl() work again. + +2007-02-16 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/allowed_input_t.h, + x11vnc/connections.c, x11vnc/help.c, x11vnc/keyboard.c, + x11vnc/keyboard.h, x11vnc/remote.c, x11vnc/screen.c, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/unixpw.c, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c, x11vnc/xevents.c: x11vnc: add + Files mode to user controlled input. more ultra/tight filexfer + tweaks. rfbversion remote control. noncache/nc unixpw user opt. + +2007-02-16 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/avahi.c, + x11vnc/connections.c, x11vnc/help.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/remote.c, x11vnc/screen.c, + x11vnc/ssltools.h, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/unixpw.c, x11vnc/user.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xevents.c: x11vnc: + tightvnc filetransfer off by default. FINDCREATEDISPLAY geometry. + +2007-02-12 runge + + * configure.ac, x11vnc/ChangeLog, x11vnc/Makefile.am, + x11vnc/README, x11vnc/avahi.c, x11vnc/avahi.h, x11vnc/cleanup.c, + x11vnc/help.c, x11vnc/options.c, x11vnc/options.h, x11vnc/remote.c, + x11vnc/screen.c, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/user.c, + x11vnc/win_utils.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: add avahi (aka + mDNS/Zeroconf/Bonjour...) support thanks to Diego Petteno. add -find + -create + +2007-02-12 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/options.c, x11vnc/options.h, x11vnc/pm.c, + x11vnc/remote.c, x11vnc/sslhelper.c, x11vnc/ssltools.h, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/unixpw.c, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c, x11vnc/xevents.c, x11vnc/xevents.h, + x11vnc/xwrappers.c: x11vnc: -grabalways, -forcedpms, -clientdpms, + -noserverdpms, -loopbg, -svc, -xdmsvc + +2007-02-10 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/pm.c, x11vnc/pm.h, x11vnc/pointer.c, x11vnc/pointer.h, + x11vnc/scan.c, x11vnc/screen.c, x11vnc/ssltools.h, x11vnc/unixpw.c, + x11vnc/unixpw.h, x11vnc/user.c, x11vnc/user.h, x11vnc/userinput.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, + x11vnc/xevents.c, x11vnc/xevents.h: x11vnc: watch textchat, etc in + unixpw, implement kbdReleaseAllKeys, setSingleWindow, + setServerInput. watch for OpenGL apps breaking XDAMAGE. + +2007-02-05 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + ll.patch: ssvnc 1.0.11 files. + +2007-02-05 runge + + * prepare_x11vnc_dist.sh, x11vnc/README, x11vnc/x11vnc.1, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c: Setup for x11vnc 0.8.5 + +2007-02-01 dscho + + * ChangeLog, libvncclient/rfbproto.c, libvncclient/vncviewer.c, + rfb/rfbclient.h: LibVNCClient: some users do not want to get + whole-screen updates; introduce client->updateRect for that + +2007-02-01 dscho + + * libvncclient/zrle.c: sometimes zrle sends too many bytes; play + safe + +2007-01-31 runge + + * x11vnc/README, x11vnc/keyboard.c, x11vnc/pointer.c, + x11vnc/screen.c, x11vnc/solid.c, x11vnc/userinput.c, + x11vnc/xdamage.c, x11vnc/xevents.c: fix warnings. + +2007-01-31 runge + + * ChangeLog: libvncclient changes. + +2007-01-31 runge + + * x11vnc/ChangeLog, x11vnc/Makefile.am, x11vnc/README, + x11vnc/cleanup.c, x11vnc/connections.c, x11vnc/cursor.c, + x11vnc/help.c, x11vnc/keyboard.c, x11vnc/macosx.c, + x11vnc/macosxCG.c, x11vnc/macosxCGS.c, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-ne + wfbsize.patch, x11vnc/options.c, x11vnc/options.h, x11vnc/params.h, + x11vnc/pointer.c, x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/screen.h, x11vnc/solid.c, x11vnc/solid.h, x11vnc/ssltools.h, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/unixpw.c, + x11vnc/unixpw.h, x11vnc/user.c, x11vnc/userinput.c, x11vnc/util.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c, x11vnc/xdamage.c, x11vnc/xdamage.h, + x11vnc/xevents.c: x11vnc: -reflect, -N. -ncache, FINDDISPLAY, + FINDCREATEDISPLAY, improvements. MODTWEAK_LOWEST workaround. + +2007-01-31 runge + + * Makefile.am, libvncclient/cursor.c, libvncclient/rfbproto.c, + libvncclient/vncviewer.c, prepare_x11vnc_dist.sh, rfb/rfbclient.h: + libvncclient: add GotCursorShape() and GotCopyRect(); x11vnc dep on + libvncclient + +2007-01-25 dscho + + * libvncserver/rfbserver.c: compile fix for MinGW + +2007-01-25 dscho + + * VisualNaCro/Makefile.am: complain when SWIG is not present, but + needed + +2007-01-25 dscho + + * VisualNaCro/configure.ac: Complain if libvncserver-config was not + found in PATH + +2007-01-10 runge + + * x11vnc/README, x11vnc/help.c, x11vnc/options.c, x11vnc/options.h, + x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/userinput.c, x11vnc/userinput.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c, x11vnc/xdamage.c, x11vnc/xevents.c, + x11vnc/xinerama.c, x11vnc/xrandr.h: some -ncache performance + improvements, rootpixmap watching, gnome wm heuristics + +2007-01-09 runge + + * x11vnc/README, x11vnc/userinput.c, x11vnc/x11vnc.1, + x11vnc/x11vnc_defs.c: Fix old compiler error; fix warnings. + +2007-01-09 runge + + * x11vnc/README, x11vnc/help.c, x11vnc/options.c, x11vnc/options.h, + x11vnc/remote.c, x11vnc/screen.c, x11vnc/solid.c, x11vnc/solid.h, + x11vnc/userinput.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c, x11vnc/xdamage.c: more speed and accuracy + improvements to -ncache mode. + +2007-01-07 runge + + * x11vnc/README, x11vnc/options.c, x11vnc/userinput.c, + x11vnc/winattr_t.h, x11vnc/x11vnc.1, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c, x11vnc/xdamage.c: changes to ncache cache + aging and xdamage skipping + +2007-01-04 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/userinput.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, + x11vnc/xdamage.c: x11vnc: more -ncache improvements. + +2007-01-02 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/remote.c, x11vnc/scan.c, + x11vnc/ssltools.h, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/user.c, x11vnc/userinput.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, + x11vnc/xevents.c, x11vnc/xevents.h: x11vnc: more -ncache + improvements. + +2006-12-29 runge + + * x11vnc/8to24.c, x11vnc/README, x11vnc/cursor.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/pointer.c, x11vnc/screen.c, + x11vnc/selection.c, x11vnc/userinput.c, x11vnc/util.c, + x11vnc/win_utils.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c, x11vnc/xevents.c, x11vnc/xwrappers.c: x11vnc + -ncache on by default for beta test. fix -nofb & -rawfb modes. + +2006-12-28 runge + + * x11vnc/README, x11vnc/userinput.c, x11vnc/win_utils.c: a couple + more warnings... + +2006-12-28 runge + + * x11vnc/8to24.c, x11vnc/README, x11vnc/connections.c, + x11vnc/cursor.c, x11vnc/gui.c, x11vnc/keyboard.c, x11vnc/macosx.c, + x11vnc/macosx.h, x11vnc/macosxCG.c, x11vnc/macosxCGS.c, + x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/nox11_funcs.h, x11vnc/pointer.c, x11vnc/remote.c, + x11vnc/scan.c, x11vnc/screen.c, x11vnc/selection.c, x11vnc/solid.c, + x11vnc/userinput.c, x11vnc/util.c, x11vnc/win_utils.c, + x11vnc/xevents.c, x11vnc/xrandr.c, x11vnc/xrecord.c, + x11vnc/xwrappers.c: still more compiler warnings; ssvnc 1.0.9 sync. + +2006-12-28 runge + + * x11vnc/8to24.c, x11vnc/README, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/cursor.c, x11vnc/macosx.c, + x11vnc/macosx.h, x11vnc/macosxCG.c, x11vnc/macosxCG.h, + x11vnc/macosxCGP.c, x11vnc/macosxCGS.c, x11vnc/macosxCGS.h, + x11vnc/scan.c, x11vnc/screen.c, x11vnc/sslhelper.c, + x11vnc/uinput.c, x11vnc/userinput.c, x11vnc/v4l.c, + x11vnc/win_utils.c, x11vnc/xevents.c, x11vnc/xwrappers.c: more + compiler warnings cleanup. + +2006-12-28 runge + + * x11vnc/8to24.c, x11vnc/README, x11vnc/connections.c, + x11vnc/cursor.c, x11vnc/gui.c, x11vnc/keyboard.c, x11vnc/macosx.c, + x11vnc/macosxCG.c, x11vnc/pointer.c, x11vnc/scan.c, + x11vnc/screen.c, x11vnc/solid.c, x11vnc/user.c, x11vnc/userinput.c, + x11vnc/userinput.h, x11vnc/win_utils.c, x11vnc/xwrappers.c, + x11vnc/xwrappers.h: x11vnc: clean up compiler warnings. + +2006-12-28 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/cursor.c, x11vnc/cursor.h, + x11vnc/help.c, x11vnc/keyboard.c, x11vnc/macosx.c, x11vnc/macosx.h, + x11vnc/macosxCGS.c, x11vnc/macosxCGS.h, x11vnc/options.c, + x11vnc/options.h, x11vnc/pointer.c, x11vnc/remote.c, x11vnc/scan.c, + x11vnc/scan.h, x11vnc/screen.c, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/userinput.c, x11vnc/userinput.h, x11vnc/winattr_t.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, + x11vnc/xevents.c, x11vnc/xrecord.c, x11vnc/xwrappers.c, + x11vnc/xwrappers.h: x11vnc: more work on -ncache. + +2006-12-17 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/unixpw.c, x11vnc/unixpw.h, x11vnc/userinput.c, + x11vnc/userinput.h, x11vnc/winattr_t.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, + x11vnc/xevents.c, x11vnc/xinerama.c: x11vnc: first pass at + client-side caching, -ncache option. + +2006-12-17 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c, x11vnc/xinerama.c: x11vnc: make -xwarppointer + the default if xinerama is active. + +2006-12-16 runge + + * rfb/rfbproto.h: Move our rfbEncodings numbers out of the TightVNC + range. + +2006-12-15 runge + + * libvncserver/auth.c: fix typo. + +2006-12-13 runge + + * ChangeLog: Remove stray "-permitfiletransfer permit file transfer + support" output + +2006-12-13 runge + + * libvncserver/cargs.c: Remove stray ""-permitfiletransfer permit + file transfer support" output. + +2006-12-11 runge + + * x11vnc/README, x11vnc/macosxCG.c, x11vnc/macosxCGS.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: cleanup some + comments. + +2006-12-10 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd: sync etv 1.0.8 + +2006-12-10 runge + + * classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, + x11vnc/cleanup.h, x11vnc/connections.c, x11vnc/gui.c, + x11vnc/help.c, x11vnc/misc/Makefile.am, x11vnc/pointer.c, + x11vnc/screen.c, x11vnc/screen.h, x11vnc/solid.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/user.c, x11vnc/v4l.c, + x11vnc/win_utils.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c: x11vnc: FINDCREATEDISPLAY support to create X + session if one cannot be found. Fix bug in java viewer. + +2006-11-24 runge + + * prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/README, + x11vnc/help.c, x11vnc/remote.c, x11vnc/user.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: install ss_vncviewer 755, + -prog option, HTTPONCE new socket for -inetd. + +2006-11-23 runge + + * classes/ssl/Makefile.am, classes/ssl/README: rename to + ss_vncviewer + +2006-11-23 runge + + * classes/ssl/ss_vncviewer, classes/ssl/ssl_vncviewer: rename + ssl_vncviewer to ss_vncviewer + +2006-11-23 runge + + * classes/ssl/ss_vncviewer: rename ssl_vncviewer to ss_vncviewer + +2006-11-22 runge + + * configure.ac: use AC_CHECK_LIB for fbpm and dpms + +2006-11-21 runge + + * configure.ac: enable --without-fbpm and --without-dpms + +2006-11-21 runge + + * ChangeLog, configure.ac, x11vnc/ChangeLog, x11vnc/README, + x11vnc/cleanup.c, x11vnc/connections.c, x11vnc/cursor.c, + x11vnc/help.c, x11vnc/keyboard.c, x11vnc/macosx.c, x11vnc/macosx.h, + x11vnc/macosxCG.c, x11vnc/macosxCGS.c, x11vnc/macosxCGS.h, + x11vnc/options.c, x11vnc/options.h, x11vnc/pm.c, x11vnc/pointer.c, + x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, x11vnc/unixpw.c, + x11vnc/userinput.c, x11vnc/win_utils.c, x11vnc/win_utils.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c, x11vnc/xdamage.c, x11vnc/xevents.c, + x11vnc/xwrappers.c: x11vnc: Mac OS X fb fixes and cuttext, -nodpms + option, local user wireframing + +2006-11-21 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/README.txt, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/connect_br.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/filelist.txt, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/zips/README: update to + 1.0.8 and renaming + +2006-11-21 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/bin/ssl_tightvncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssl_vnc_gui, + x11vnc/misc/enhanced_tightvnc_viewer/bin/tightvncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_tightvncviewer.tc + l, x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_vncviewer: + delete + +2006-11-21 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssvnc_cmd, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ss_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssvnc.tcl: rename + +2006-11-13 runge + + * ChangeLog, configure.ac, prepare_x11vnc_dist.sh, x11vnc/8to24.c, + x11vnc/ChangeLog, x11vnc/Makefile.am, x11vnc/README, + x11vnc/cleanup.c, x11vnc/connections.c, x11vnc/cursor.c, + x11vnc/cursor.h, x11vnc/gui.c, x11vnc/help.c, x11vnc/keyboard.c, + x11vnc/linuxfb.c, x11vnc/macosx.c, x11vnc/macosx.h, + x11vnc/macosxCG.c, x11vnc/macosxCG.h, x11vnc/macosxCGP.c, + x11vnc/macosxCGP.h, x11vnc/macosxCGS.c, x11vnc/macosxCGS.h, + x11vnc/options.c, x11vnc/options.h, x11vnc/params.h, + x11vnc/pointer.c, x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/selection.c, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/userinput.c, x11vnc/win_utils.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, + x11vnc/xdamage.c, x11vnc/xdamage.h, x11vnc/xevents.c, + x11vnc/xinerama.c, x11vnc/xrandr.c, x11vnc/xrecord.c, + x11vnc/xwrappers.c, x11vnc/xwrappers.h: x11vnc: Native Mac OS X + support. + +2006-11-08 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/Darwin.Power.Macintosh/.cp + over, + x11vnc/misc/enhanced_tightvnc_viewer/bin/Darwin.Power.Macintosh/vnc + viewer.sh, + x11vnc/misc/enhanced_tightvnc_viewer/bin/Darwin.i386/.cpover, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssl_tightvncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssl_vnc_gui, + x11vnc/misc/enhanced_tightvnc_viewer/bin/tightvncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_tightvncviewer.tc + l, x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle: Add Darwin + stuff. Sync to current 1.0.7 + +2006-11-08 runge + + * ChangeLog, classes/ssl/ssl_vncviewer, configure.ac, + prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/README, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: configure.ac -R and macosx, + prepare_x11vnc_dist.sh rpm fix + +2006-10-30 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: Add tip about how to + reenable RECORD extension. + +2006-10-12 dscho + + * VisualNaCro/nacro.c, VisualNaCro/nacro.h: VisualNaCro: add + sendascii + +2006-10-12 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cursor.c, x11vnc/help.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/remote.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: x11vnc: -cursor_drag for DnD, etc. + +2006-10-11 runge + + * libvncserver/tightvnc-filetransfer/rfbtightserver.c: N_ENC_CAPS + check does not work if libz is not present. + +2006-10-10 dscho + + * VisualNaCro/ChangeLog, VisualNaCro/recorder.pl: VisualNaCro: add + 'i', 'c' and 'r' menu keys + +2006-10-10 dscho + + * VisualNaCro/ChangeLog, VisualNaCro/recorder.pl: VisualNaCro: add + --compact and --compact-dragging + +2006-10-07 runge + + * classes/ssl/ssl_vncviewer, x11vnc/README, + x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/connect_br.tcl, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/info/stunnel/loca + tion.url, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_tightvncviewer.tc + l, x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/zips/README, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: Changes for ETV, double + SSL/SSH. + +2006-09-24 runge + + * classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/keyboard.c, x11vnc/pointer.c, + x11vnc/sslhelper.c, x11vnc/unixpw.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: improve SSL Java + viewer, cleanup -unixpw code. + +2006-09-21 runge + + * + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_tightvncviewer.tc + l, x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_vncviewer: sync + etv. profile cleanup + +2006-09-21 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/connections.h, x11vnc/help.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/sslhelper.c, x11vnc/unixpw.c, + x11vnc/unixpw.h, x11vnc/user.c, x11vnc/user.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c: x11vnc: + -unixpw_cmd, -passwfile cmd:/custom:, -sslnofail, -ultrafilexfer + +2006-09-18 runge + + * x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_tightvncviewer.tc + l: ETV release 1.0.4 + +2006-09-18 runge + + * + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_tightvncviewer.tc + l, x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle: sync + ETV 1.0.4 + +2006-09-18 runge + + * libvncserver/rfbserver.c, x11vnc/README, x11vnc/x11vnc.c: x11vnc: + improve ultravnc filexfer rate by calling rfbCheckFD more often + +2006-09-17 runge + + * + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_tightvncviewer.tc + l: Sync ETV. + +2006-09-17 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/cursor.c, x11vnc/help.c, x11vnc/keyboard.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/pm.c, x11vnc/scan.c, + x11vnc/screen.c, x11vnc/sslcmds.c, x11vnc/sslhelper.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, + x11vnc/xinerama.c, x11vnc/xwrappers.c: x11vnc: -verbose, + -connect_or_exit, -rfbport 0, print out SSL cert. + +2006-09-15 runge + + * x11vnc/README, x11vnc/help.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c: + small tweaks, -sig alias. + +2006-09-15 runge + + * libvncserver/rfbserver.c, x11vnc/ChangeLog, x11vnc/README, + x11vnc/cleanup.c, x11vnc/help.c, x11vnc/screen.c, x11vnc/unixpw.c, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: x11vnc: clear DISPLAY for + -unixpw su_verify, user supplied sig ignore. + +2006-09-14 runge + + * classes/ssl/ssl_vncviewer, x11vnc/ChangeLog, x11vnc/README, + x11vnc/help.c, x11vnc/misc/enhanced_tightvnc_viewer/COPYING, + x11vnc/misc/enhanced_tightvnc_viewer/README, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/README.txt, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/info/esound/downl + oad.url, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/info/openssl/down + load.url, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/info/openssl/loca + tion.url, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/info/plink/downlo + ad.url, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/info/plink/licenc + e.url, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/info/stunnel/down + load.url, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/info/stunnel/loca + tion.url, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/info/vncviewer/do + wnload.url, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/info/vncviewer/lo + cation.url, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/stunnel-client.co + nf, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/stunnel-server.co + nf, + x11vnc/misc/enhanced_tightvnc_viewer/Windows/util/w98/location.url, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssl_tightvncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/ssl_vnc_gui, + x11vnc/misc/enhanced_tightvnc_viewer/bin/tightvncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_tightvncviewer.tc + l, x11vnc/misc/enhanced_tightvnc_viewer/bin/util/ssl_vncviewer, + x11vnc/misc/enhanced_tightvnc_viewer/bin/util/stunnel-server.conf, + x11vnc/misc/enhanced_tightvnc_viewer/build.unix, + x11vnc/misc/enhanced_tightvnc_viewer/filelist.txt, + x11vnc/misc/enhanced_tightvnc_viewer/src/README, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/README, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_bundle, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_getpatches, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/_vncpatchapplied, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/stunnel-maxconn.pa + tch, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-fu + llscreen.patch, + x11vnc/misc/enhanced_tightvnc_viewer/src/patches/tight-vncviewer-ne + wfbsize.patch, + x11vnc/misc/enhanced_tightvnc_viewer/src/zips/README, + x11vnc/remote.c, x11vnc/util.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c: x11vnc: + enhanced_tightvnc_viewer files, ssh -t keystroke response + improvement. + +2006-09-12 dscho + + * VisualNaCro/Makefile.am, libvncserver-config.in: fix in-place + compilation of VisualNaCro + +2006-09-12 dscho + + * VisualNaCro/recorder.pl: fix call to alert() + +2006-09-12 dscho + + * VisualNaCro/NEWS, VisualNaCro/nacro.c, VisualNaCro/nacro.h, + VisualNaCro/recorder.pl: VisualNaCro: add magic key 'd' to display + the current reference image + +2006-09-12 dscho + + * VisualNaCro/nacro.h: forgot to check in nacro.h + +2006-09-12 dscho + + * VisualNaCro/nacro.c, VisualNaCro/recorder.pl: implement rubberband + for rectangular selection + +2006-09-12 dscho + + * VisualNaCro/Makefile.am, VisualNaCro/configure.ac: fix compilation + with cygwin + +2006-09-12 dscho + + * rfb/rfbproto.h, vncterm/LinuxVNC.c, vncterm/VNConsole.c: do not + always include rfb/keysym.h + +2006-09-12 dscho + + * AUTHORS, VisualNaCro/NEWS, VisualNaCro/nacro.c, + VisualNaCro/nacro.h, VisualNaCro/recorder.pl: VisualNaCro: support + clipboard and symbolic key names with X11::Keysyms + +2006-09-12 dscho + + * VisualNaCro/nacro.c, VisualNaCro/nacro.h: support clipboard + +2006-09-11 dscho + + * libvncclient/rfbproto.c, rfb/rfbclient.h: make cut text handling + using a hook + +2006-09-10 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cursor.c, x11vnc/help.c, + x11vnc/ssltools.h, x11vnc/uinput.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: REQ_ARGS, + EV_SYN/SYN_REPORT check. restore -cursor most under -display WAIT + +2006-09-05 runge + + * classes/ssl/proxy.vnc, classes/ssl/ssl_vncviewer: Update + ssl_vncviewer. Fix bug in proxy.vnc with multiple PORT= params. + +2006-08-10 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/linuxfb.c, + x11vnc/uinput.c, x11vnc/uinput.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c: x11vnc: first pass at + touchscreens via uinput. + +2006-08-02 runge + + * x11vnc/ChangeLog: add to changelog + +2006-08-02 runge + + * classes/ssl/ssl_vncviewer, x11vnc/README, x11vnc/help.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/remote.c, + x11vnc/sslhelper.c, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: + tweaks to ssl_xfer; -ssltimeout option. + +2006-07-31 runge + + * classes/ssl/ssl_vncviewer, x11vnc/README, x11vnc/pointer.c, + x11vnc/scan.c, x11vnc/scan.h, x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: + x11vnc: more features to ssl_vncviewer for enhanced tightvnc viewer + project + +2006-07-29 runge + + * classes/ssl/ssl_vncviewer: one more tweak, start from disp 30 + +2006-07-29 runge + + * classes/ssl/ssl_vncviewer: add debug = 6 to stunnel config. + +2006-07-28 runge + + * classes/ssl/ssl_vncviewer, x11vnc/ChangeLog, x11vnc/README, + x11vnc/cursor.c, x11vnc/help.c, x11vnc/params.h, x11vnc/pointer.c, + x11vnc/rates.c, x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/screen.h, x11vnc/solid.c, x11vnc/sslcmds.c, + x11vnc/sslhelper.c, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/unixpw.c, x11vnc/user.c, x11vnc/userinput.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: x11vnc: -rotate option + +2006-07-18 runge + + * ChangeLog, configure.ac, x11vnc/8to24.c, x11vnc/ChangeLog, + x11vnc/Makefile.am, x11vnc/README, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/cursor.c, x11vnc/gui.c, + x11vnc/keyboard.c, x11vnc/linuxfb.c, x11vnc/nox11.h, + x11vnc/nox11_funcs.h, x11vnc/pointer.c, x11vnc/remote.c, + x11vnc/screen.c, x11vnc/selection.c, x11vnc/solid.c, + x11vnc/sslhelper.c, x11vnc/uinput.c, x11vnc/userinput.c, + x11vnc/util.c, x11vnc/v4l.c, x11vnc/win_utils.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, + x11vnc/xevents.c, x11vnc/xwrappers.c: x11vnc: enable --without-x + builds for -rawfb only binaries. + +2006-07-15 runge + + * configure.ac, prepare_x11vnc_dist.sh, x11vnc/README, + x11vnc/help.c, x11vnc/user.c, x11vnc/x11vnc.1, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: update versions for next rel. add some more + shortcuts to user:opts + +2006-07-12 runge + + * ChangeLog, configure.ac: LibVNCServer 0.8.2 release. + +2006-07-12 runge + + * x11vnc/README, x11vnc/x11vnc.1, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: set REL8x + +2006-07-12 runge + + * x11vnc/README, x11vnc/help.c, x11vnc/keyboard.c, + x11vnc/linuxfb.c, x11vnc/params.h, x11vnc/pointer.c, + x11vnc/screen.c, x11vnc/user.c, x11vnc/x11vnc.1: x11vnc: wording + changes; remove "-rawfb cons" in favor of "console" + +2006-07-11 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, + x11vnc/keyboard.c, x11vnc/remote.c, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/uinput.c, x11vnc/uinput.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: more + UINPUT mode tweaks. + +2006-07-10 runge + + * x11vnc/README, x11vnc/help.c, x11vnc/remote.c, x11vnc/sslcmds.c, + x11vnc/sslhelper.c, x11vnc/uinput.c, x11vnc/unixpw.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: x11vnc: improve uinput heuristics so button + clicks work on qt-embedded. + +2006-07-09 runge + + * ChangeLog, configure.ac, x11vnc/ChangeLog, x11vnc/Makefile.am, + x11vnc/README, x11vnc/help.c, x11vnc/keyboard.c, x11vnc/linuxfb.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/params.h, + x11vnc/pointer.c, x11vnc/remote.c, x11vnc/screen.c, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/uinput.c, + x11vnc/uinput.h, x11vnc/util.c, x11vnc/v4l.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: add uinput support + for full input into linux fb device (e.g. qt-embed). + +2006-07-05 runge + + * x11vnc/README, x11vnc/keyboard.c: x11vnc: whoops str decl in wrong + place for old compilers. + +2006-07-04 runge + + * x11vnc/README, x11vnc/keyboard.c, x11vnc/pointer.c, + x11vnc/xwrappers.c: x11vnc: check all XKeysymToString() return + values. + +2006-07-04 runge + + * x11vnc/README, x11vnc/keyboard.c, x11vnc/unixpw.c, + x11vnc/unixpw.h: x11vnc: plug a couple unixpw gaps. + +2006-07-04 runge + + * configure.ac, x11vnc/README, x11vnc/inet.c, x11vnc/keyboard.c, + x11vnc/sslhelper.c, x11vnc/unixpw.c, x11vnc/user.c, x11vnc/util.c, + x11vnc/v4l.c, x11vnc/x11vnc.c, x11vnc/x11vnc.h: x11vnc: remove + compiler warnings; HP-UX tweaks. + +2006-07-04 runge + + * ChangeLog, configure.ac, x11vnc/ChangeLog, x11vnc/README, + x11vnc/connections.c, x11vnc/connections.h, x11vnc/cursor.c, + x11vnc/cursor.h, x11vnc/help.c, x11vnc/help.h, x11vnc/inet.c, + x11vnc/pointer.c, x11vnc/remote.c, x11vnc/scan.c, + x11vnc/sslhelper.c, x11vnc/sslhelper.h, x11vnc/unixpw.c, + x11vnc/unixpw.h, x11vnc/user.c, x11vnc/userinput.c, x11vnc/util.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, + x11vnc/xevents.c: x11vnc: more -unixpw work. add -license, etc. + options + +2006-06-24 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/connections.h, x11vnc/gui.c, + x11vnc/scan.c, x11vnc/solid.c, x11vnc/sslcmds.c, x11vnc/unixpw.c, + x11vnc/user.c, x11vnc/util.c, x11vnc/v4l.c, x11vnc/win_utils.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, + x11vnc/xwrappers.c: x11vnc: misc cleanup. + +2006-06-18 runge + + * x11vnc/8to24.c, x11vnc/ChangeLog, x11vnc/README, + x11vnc/cleanup.c, x11vnc/connections.c, x11vnc/connections.h, + x11vnc/cursor.c, x11vnc/gui.c, x11vnc/help.c, x11vnc/keyboard.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/pm.c, x11vnc/pointer.c, + x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, x11vnc/solid.c, + x11vnc/sslcmds.c, x11vnc/sslhelper.c, x11vnc/sslhelper.h, + x11vnc/ssltools.h, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/unixpw.c, x11vnc/unixpw.h, x11vnc/user.c, + x11vnc/userinput.c, x11vnc/util.c, x11vnc/v4l.c, + x11vnc/win_utils.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xdamage.c, + x11vnc/xevents.c, x11vnc/xevents.h, x11vnc/xrandr.h, + x11vnc/xwrappers.c: x11vnc: --grabkbd, -grabptr, -env, -allowedcmds, + unixpw+WAIT user fred:options + +2006-06-15 dscho + + * VisualNaCro/README: fix typo + +2006-06-15 dscho + + * VisualNaCro/ChangeLog, VisualNaCro/NEWS, VisualNaCro/recorder.pl: + no need for Time::HiRes to play back + +2006-06-15 dscho + + * VisualNaCro/recorder.pl: add timing + +2006-06-13 runge + + * classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/remote.c, x11vnc/screen.c, + x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/unixpw.c, + x11vnc/unixpw.h, x11vnc/user.c, x11vnc/util.c, x11vnc/util.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: x11vnc: -display WAIT:cmd=FINDDISPLAY, + HTTPONCE, -http_ssl option, Java fixes. + +2006-06-09 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/unixpw.c, x11vnc/user.c: + x11vnc: make -display WAIT + -unixpw work on Solaris. + +2006-06-08 runge + + * ChangeLog, prepare_x11vnc_dist.sh, x11vnc/ChangeLog, + x11vnc/README, x11vnc/cleanup.c, x11vnc/connections.c, + x11vnc/gui.c, x11vnc/help.c, x11vnc/options.c, x11vnc/pointer.c, + x11vnc/remote.c, x11vnc/screen.c, x11vnc/solid.c, x11vnc/sslcmds.c, + x11vnc/sslhelper.c, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/unixpw.c, x11vnc/unixpw.h, x11vnc/user.c, x11vnc/user.h, + x11vnc/v4l.c, x11vnc/win_utils.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xevents.c, + x11vnc/xkb_bell.c, x11vnc/xrecord.c, x11vnc/xwrappers.c, + x11vnc/xwrappers.h: x11vnc: -display WAIT:..., -users unixpw=, su_verify dpy command. + +2006-06-05 steven_carr + + * libvncclient/rfbproto.c, libvncserver/auth.c, + libvncserver/rfbserver.c: RFB 3.8 clients are well informed + +2006-06-05 steven_carr + + * libvncserver/auth.c: Better support for RFB >= 3.8 protocols + +2006-06-05 steven_carr + + * libvncserver/auth.c: All security types for RFB >= 3.7 *have* to + respond with a Security Result (Even rfbSecTypeNone) + +2006-06-03 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/help.c, x11vnc/keyboard.c, + x11vnc/linuxfb.c, x11vnc/options.c, x11vnc/options.h, + x11vnc/rates.c, x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/screen.h, x11vnc/sslcmds.c, x11vnc/sslhelper.c, + x11vnc/sslhelper.h, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/unixpw.c, x11vnc/userinput.c, x11vnc/win_utils.c, + x11vnc/win_utils.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xevents.c, + x11vnc/xevents.h, x11vnc/xwrappers.c: x11vnc: -capslock -skip_lockkeys; Alt keys under -rawfb cons. + +2006-06-03 runge + + * libvncserver/auth.c: move all types into handler loop. + +2006-05-29 steven_carr + + * ChangeLog: Identified and removed some memory leaks associated + with the Encodings RRE, CoRRE, ZLIB, and Ultra. KeyboardLedState + now has portable masks defined. rfb >= 3.7 Security Type Handler + list would grow 1 entry for each new client connection. + +2006-05-29 steven_carr + + * libvncserver/auth.c: Security Type memory leak plugged. Leaks + when rfb >= 3.7 clients connects. The security list would grow 1 + entry when clients connect. + +2006-05-28 steven_carr + + * rfb/rfbproto.h: KeyboardLedState Encoding Masks are now defined + for portability + +2006-05-28 steven_carr + + * libvncserver/corre.c, libvncserver/main.c, + libvncserver/private.h, libvncserver/rfbserver.c, + libvncserver/rre.c, libvncserver/ultra.c, libvncserver/zlib.c: + Plugged some memory leakage + +2006-05-16 steven_carr + + * libvncserver/rfbserver.c, rfb/rfb.h: Permit auth.c to test major + version + +2006-05-16 steven_carr + + * libvncserver/auth.c: Specifically test for Major Version 3 added + +2006-05-16 steven_carr + + * ChangeLog, libvncserver/stats.c: Statistics now fit into 80-column + output + +2006-05-16 steven_carr + + * libvncserver/stats.c: Statistics output now fits in 80-column + output + +2006-05-16 steven_carr + + * libvncserver/cursor.c: Corrected Cursor Statistics reporting as + messages + +2006-05-15 dscho + + * libvncserver/tightvnc-filetransfer/Makefile.am: remove unneeded + file + +2006-05-15 steven_carr + + * libvncserver/rfbserver.c, rfb/rfb.h: Support sending TextChat + messages back to the client + +2006-05-15 steven_carr + + * ChangeLog, libvncserver/cargs.c, libvncserver/main.c, + libvncserver/rfbserver.c, rfb/rfb.h, rfb/rfbproto.h: Default to RFB + 3.8, add command line option to specify the RFB version. + +2006-05-15 steven_carr + + * ChangeLog, client_examples/SDLvncviewer.c, + libvncclient/rfbproto.c, libvncclient/ultra.c, libvncclient/zrle.c, + libvncserver/auth.c, libvncserver/corre.c, libvncserver/cursor.c, + libvncserver/hextile.c, libvncserver/main.c, + libvncserver/rfbserver.c, libvncserver/rre.c, libvncserver/scale.c, + libvncserver/sockets.c, libvncserver/stats.c, libvncserver/tight.c, + libvncserver/tightvnc-filetransfer/rfbtightproto.h, + libvncserver/ultra.c, libvncserver/zlib.c, libvncserver/zrle.c, + rfb/rfb.h, rfb/rfbclient.h, rfb/rfbproto.h, x11vnc/rates.c, + x11vnc/userinput.c: The great UltraVNC Compatibility Commit + +2006-05-13 runge + + * ChangeLog, libvncclient/Makefile.am, libvncclient/lzoconf.h, + libvncclient/minilzo.c, libvncclient/minilzo.h, + libvncserver/lzoconf.h, libvncserver/minilzo.c, + libvncserver/minilzo.h, libvncserver/rfbserver.c, + libvncserver/scale.c, vncterm/Makefile.am: fix some build issues WRT ultravnc code. + +2006-05-07 runge + + * ChangeLog, configure.ac, x11vnc/8to24.c, x11vnc/ChangeLog, + x11vnc/Makefile.am, x11vnc/README, x11vnc/connections.c, + x11vnc/cursor.c, x11vnc/gui.c, x11vnc/help.c, x11vnc/keyboard.c, + x11vnc/linuxfb.c, x11vnc/linuxfb.h, x11vnc/options.c, + x11vnc/options.h, x11vnc/params.h, x11vnc/pm.c, x11vnc/pointer.c, + x11vnc/rates.c, x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/screen.h, x11vnc/selection.c, x11vnc/solid.c, + x11vnc/sslhelper.c, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/unixpw.c, x11vnc/user.c, x11vnc/userinput.c, x11vnc/v4l.c, + x11vnc/v4l.h, x11vnc/win_utils.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xdamage.c, + x11vnc/xevents.c, x11vnc/xinerama.c, x11vnc/xkb_bell.c, + x11vnc/xrandr.c, x11vnc/xrecord.c, x11vnc/xwrappers.c, + x11vnc/xwrappers.h: x11vnc: support for video4linux webcams & tv-tuners, -24to32 bpp + option, -rawfb console. + +2006-05-04 steven_carr + + * ChangeLog, libvncclient/rfbproto.c, libvncserver/rfbserver.c, + rfb/rfb.h, rfb/rfbproto.h, x11vnc/screen.c: Server Capability + Encodings rfbEncodingSupportedEncodings - What encodings are + supported? rfbEncodingSupportedMessages - What message types are + supported? rfbEncodingServerIdentity - What is the servers + version string? ie: "x11vnc: 0.8.1 lastmod: 2006-04-25 (LibVNCServer + 0.9pre)" + +2006-05-04 steven_carr + + * libvncclient/rfbproto.c: UltraVNC with scaling, will send + rectangles with a zero W or H We need to process the rectangle + (especially if it a type that contains subrectangles or any kind of + compression). UltraVNC should be fixed to prevent these useless + rectangles from being sent. + +2006-05-04 steven_carr + + * libvncclient/rfbproto.c, libvncclient/vncviewer.c, + rfb/rfbclient.h: Client side support for PalmVNC/UltraVNC 'Server + Side Scaling' + +2006-05-04 steven_carr + + * rfb/rfbproto.h: KeyboardLedState should be placed in 'various + protocol extensions' + +2006-05-03 steven_carr + + * ChangeLog, libvncserver/Makefile.am, libvncserver/corre.c, + libvncserver/cursor.c, libvncserver/hextile.c, libvncserver/main.c, + libvncserver/rfbserver.c, libvncserver/rre.c, libvncserver/scale.c, + libvncserver/scale.h, libvncserver/stats.c, libvncserver/tight.c, + libvncserver/ultra.c, libvncserver/zlib.c, libvncserver/zrle.c, + rfb/rfb.h: Client Independent Server Side Scaling is now supported + Both PalmVNC and UltraVNC SetScale messages are supported + +2006-05-02 steven_carr + + * ChangeLog, libvncclient/Makefile.am, libvncclient/lzoconf.h, + libvncclient/minilzo.c, libvncclient/minilzo.h, + libvncclient/rfbproto.c, libvncclient/ultra.c, + libvncclient/vncviewer.c, libvncserver/Makefile.am, + libvncserver/lzoconf.h, libvncserver/minilzo.c, + libvncserver/minilzo.h, libvncserver/rfbserver.c, + libvncserver/ultra.c, rfb/rfb.h, rfb/rfbclient.h: Ultra Encoding + added. Tested against UltraVNC V1.01 + +2006-05-02 steven_carr + + * libvncclient/rfbproto.c: CopyRectangle() BPP!=8 bug fixed + +2006-05-02 steven_carr + + * libvncclient/vncviewer.c: Eliminate incompatible pointer + assignment warning (gcc 4.0.1) + +2006-05-02 steven_carr + + * libvncclient/hextile.c, libvncclient/tight.c, libvncclient/zlib.c: + signed vs unsigned warnings eliminated (gcc 4.0.1) + +2006-04-30 dscho + + * examples/Makefile.am: include rotatetemplate.c in the tarball + +2006-04-28 dscho + + * client_examples/SDLvncviewer.c, libvncclient/rfbproto.c, + rfb/rfbclient.h: libvncclient: support changing of framebuffer size; + make SDLvncviewer use it + +2006-04-28 dscho + + * client_examples/SDLvncviewer.c: fix SDLvncviewer for widths which + are not divisible by 8 + +2006-04-27 dscho + + * ChangeLog, examples/.cvsignore, examples/Makefile.am, + examples/pnmshow.c, examples/rotate.c, examples/rotatetemplate.c: + add rotate and flip example + +2006-04-27 dscho + + * examples/camera.c: malloc.h should not be needed (it is missing on + quite a few platforms) + +2006-04-26 runge + + * ChangeLog, classes/ssl/ssl_vncviewer, + client_examples/Makefile.am, configure.ac, contrib/Makefile.am, + examples/Makefile.am, libvncclient/Makefile.am, + libvncserver/Makefile.am, + libvncserver/tightvnc-filetransfer/Makefile.am, test/Makefile.am, + x11vnc/ChangeLog, x11vnc/Makefile.am, x11vnc/README, x11vnc/help.c, + x11vnc/sslhelper.c, x11vnc/x11vnc.1, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: Make VPATH building work with -I $(top_srcdir) for rfb/rfb.h + +2006-04-17 steven_carr + + * ChangeLog, examples/Makefile.am, examples/camera.c: Added an + example camera application to demonstrate another way to write a + server application. + +2006-04-16 runge + + * classes/ssl/ssl_vncviewer, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, x11vnc/help.c, + x11vnc/sslcmds.c, x11vnc/sslhelper.c, x11vnc/ssltools.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: Apache SSL gateway. More web proxy cases for Java and + ssl_vncviewer. + +2006-04-05 runge + + * ChangeLog, classes/ssl/Makefile.am, classes/ssl/README, + classes/ssl/proxy.vnc, classes/ssl/ssl_vncviewer, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + configure.ac, prepare_x11vnc_dist.sh, x11vnc/ChangeLog, + x11vnc/Makefile.am, x11vnc/README, x11vnc/cleanup.c, + x11vnc/cleanup.h, x11vnc/connections.c, x11vnc/help.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/pm.c, x11vnc/pm.h, + x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, x11vnc/sslcmds.c, + x11vnc/sslcmds.h, x11vnc/sslhelper.c, x11vnc/sslhelper.h, + x11vnc/ssltools.h, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: SSL Java viewer work thru proxy. -sslGenCA, etc key/cert + management utils for x11vnc. FBPM "support". + +2006-03-28 dscho + + * ChangeLog, client_examples/SDLvncviewer.c, + libvncclient/rfbproto.c, libvncclient/vncviewer.c, + libvncserver/main.c, libvncserver/rfbserver.c, rfb/rfb.h, + rfb/rfbclient.h, rfb/rfbproto.h: add KeyboardLedState extension + +2006-03-28 runge + + * ChangeLog, classes/Makefile.am, classes/ssl/Makefile.am, + classes/ssl/index.vnc, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-cursor-colors+no-tab + -traversal.patch, + classes/ssl/tightvnc-1.3dev7_javasrc-vncviewer-ssl.patch, + configure.ac, libvncserver/httpd.c, prepare_x11vnc_dist.sh, + x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/connections.h, x11vnc/cursor.c, + x11vnc/help.c, x11vnc/keyboard.c, x11vnc/options.c, + x11vnc/options.h, x11vnc/pointer.c, x11vnc/rates.c, + x11vnc/remote.c, x11vnc/screen.c, x11vnc/sslcmds.c, + x11vnc/sslhelper.c, x11vnc/sslhelper.h, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/unixpw.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, + x11vnc/xwrappers.c: SSL patch for Java viewer. https support for x11vnc. + +2006-03-27 dscho + + * AUTHORS, ChangeLog, libvncserver/rfbserver.c: ignore + maxRectsPerUpdate when encoding is Zlib (thanks scarr) + +2006-03-27 dscho + + * libvncclient/vncviewer.c: libvncclient: take -compress and + -quality command line arguments + +2006-03-12 runge + + * configure.ac, x11vnc/ChangeLog, x11vnc/Makefile.am, + x11vnc/README, x11vnc/cleanup.c, x11vnc/connections.c, + x11vnc/gui.c, x11vnc/help.c, x11vnc/misc/Xdummy, x11vnc/options.c, + x11vnc/options.h, x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/screen.h, x11vnc/selection.c, x11vnc/sslcmds.c, + x11vnc/sslhelper.c, x11vnc/sslhelper.h, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/unixpw.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, + x11vnc/xevents.c: x11vnc: add -ssl mode using libssl. Include Xdummy in misc. + +2006-03-08 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/help.c, x11vnc/options.c, x11vnc/options.h, x11vnc/remote.c, + x11vnc/screen.c, x11vnc/selection.c, x11vnc/selection.h, + x11vnc/sslcmds.c, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/unixpw.c, x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c, x11vnc/xevents.c, x11vnc/xevents.h: x11vnc: do CLIPBOARD, reverse conn require passwds, -usepw, + -debug_sel, -storepasswd homedir. + +2006-03-06 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/connections.c, + x11vnc/connections.h, x11vnc/gui.c, x11vnc/gui.h, x11vnc/help.c, + x11vnc/params.h, x11vnc/remote.c, x11vnc/sslcmds.c, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/unixpw.c, + x11vnc/unixpw.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc_defs.c, x11vnc/xevents.c, x11vnc/xevents.h: x11vnc: gui speedup and fixes. -unixpw and -inetd + +2006-03-05 runge + + * configure.ac, x11vnc/ChangeLog, x11vnc/README, + x11vnc/connections.c, x11vnc/gui.c, x11vnc/help.c, x11vnc/inet.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/remote.c, + x11vnc/sslcmds.c, x11vnc/sslcmds.h, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/unixpw.c, x11vnc/unixpw.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: x11vnc: -unixpw on *bsd, hpux and tru64. -unixpw_nis mode. stunnel + and gui tweaks. + +2006-03-03 runge + + * configure.ac, x11vnc/8to24.c, x11vnc/ChangeLog, x11vnc/README, + x11vnc/connections.c, x11vnc/help.c, x11vnc/inet.c, x11vnc/inet.h, + x11vnc/keyboard.c, x11vnc/remote.c, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/unixpw.c, x11vnc/unixpw.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: x11vnc: more -unixpw mode. -gone popup mode. Change filexfer via + -R. Tune SMALL_FOOTPRINT. + +2006-03-01 dscho + + * examples/Makefile.am, examples/blooptest.c, examples/example.c: + Fix blooptest example + +2006-03-01 dscho + + * rfb/keysym.h: do not assume that KEYSYM_H guards X11's keysym.h + +2006-03-01 dscho + + * libvncserver/main.c: do not timeout on idle client input (with + pthreads) + +2006-03-01 dscho + + * examples/Makefile.am: if compiling with pthreads, also compile + blooptest + +2006-02-28 dscho + + * libvncserver/sockets.c: rfbCheckFds now returns the number of + processed events + +2006-02-28 dscho + + * AUTHORS, ChangeLog, libvncserver/main.c, libvncserver/sockets.c, + rfb/rfb.h: add handleEventsEagerly flag (Thanks, Donald) + +2006-02-25 runge + + * ChangeLog, configure.ac, x11vnc/ChangeLog, x11vnc/Makefile.am, + x11vnc/README, x11vnc/allowed_input_t.h, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/cursor.c, x11vnc/help.c, + x11vnc/inet.c, x11vnc/inet.h, x11vnc/keyboard.c, x11vnc/keyboard.h, + x11vnc/options.c, x11vnc/options.h, x11vnc/pointer.c, + x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, + x11vnc/selection.c, x11vnc/sslcmds.c, x11vnc/sslcmds.h, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/unixpw.c, + x11vnc/unixpw.h, x11vnc/user.c, x11vnc/userinput.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c, x11vnc/xdamage.c, x11vnc/xevents.c, + x11vnc/xrecord.c: x11vnc: -unixpw and -stunnel. Add clipboard to input control. + +2006-02-24 rohit_99129 + + * libvncserver/main.c, rfb/rfb.h: Added method to get extension + specific client data + +2006-02-24 rohit_99129 + + * ChangeLog, libvncserver/main.c, + libvncserver/tightvnc-filetransfer/rfbtightserver.c, rfb/rfb.h: + Added method to get extension specific client data + +2006-02-22 dscho + + * ChangeLog, libvncserver/auth.c, libvncserver/main.c, + libvncserver/tightvnc-filetransfer/rfbtightserver.c, rfb/rfb.h: add + functions to unregister extensions/security types + +2006-02-21 dscho + + * configure.ac, x11vnc/Makefile.am: IRIX linker is very picky about + order of libraries + +2006-02-20 runge + + * ChangeLog, configure.ac, libvncserver/cursor.c, + libvncserver/main.c, + libvncserver/tightvnc-filetransfer/filelistinfo.c, + libvncserver/tightvnc-filetransfer/filetransfermsg.c, + libvncserver/tightvnc-filetransfer/handlefiletransferrequest.c, + prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/README, + x11vnc/connections.c, x11vnc/inet.c, x11vnc/user.c, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c, x11vnc/xevents.c: fix some non-gcc compiler warnings and signals in x11vnc + +2006-02-07 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.h: x11vnc: fix AIX build wrt h_errno. + +2006-02-06 runge + + * x11vnc/8to24.c, x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, + x11vnc/win_utils.c, x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: x11vnc: -8to24 more speedups; tunables for very slow machines. + +2006-02-05 runge + + * x11vnc/8to24.c, x11vnc/8to24.h, x11vnc/ChangeLog, x11vnc/README, + x11vnc/help.c, x11vnc/options.c, x11vnc/options.h, x11vnc/params.h, + x11vnc/rates.c, x11vnc/scan.c, x11vnc/scan.h, x11vnc/userinput.c, + x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, + x11vnc/xinerama.c: x11vnc: -8to24 speedups and improvements. + +2006-01-22 runge + + * x11vnc/8to24.c, x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, + x11vnc/options.c, x11vnc/options.h, x11vnc/pointer.c, + x11vnc/rates.c, x11vnc/remote.c, x11vnc/screen.c, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/win_utils.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: -8to24 opts, use XGetSubImage. fix -threads deadlocks and + -rawfb crash + +2006-01-19 runge + + * x11vnc/8to24.c, x11vnc/8to24.h, x11vnc/ChangeLog, x11vnc/README, + x11vnc/cursor.c, x11vnc/help.c, x11vnc/remote.c, x11vnc/scan.c, + x11vnc/screen.c, x11vnc/userinput.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c: x11vnc: -8to24 now works on default depth 8 displays. + +2006-01-16 runge + + * x11vnc/8to24.c, x11vnc/ChangeLog, x11vnc/README, x11vnc/help.c, + x11vnc/util.c, x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: x11vnc: more tweaks to -8to24 XGETIMAGE_8TO24 + +2006-01-15 runge + + * ChangeLog, x11vnc/8to24.c, x11vnc/8to24.h, x11vnc/ChangeLog, + x11vnc/Makefile.am, x11vnc/README, x11vnc/connections.c, + x11vnc/cursor.c, x11vnc/help.c, x11vnc/options.c, x11vnc/options.h, + x11vnc/remote.c, x11vnc/scan.c, x11vnc/screen.c, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/userinput.c, x11vnc/util.c, + x11vnc/util.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h, + x11vnc/x11vnc_defs.c: x11vnc: add -8to24 option for some multi-depth displays. + +2006-01-12 runge + + * ChangeLog, configure.ac, x11vnc/ChangeLog, x11vnc/README, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.h: configure.ac: + add switches for most X extensions. + +2006-01-11 runge + + * libvncserver/main.c, prepare_x11vnc_dist.sh, x11vnc/README, + x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: logMutex needs to be + initialized too; in rfbDefaultLog. + +2006-01-11 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/cleanup.c, + x11vnc/connections.c, x11vnc/cursor.c, x11vnc/keyboard.c, + x11vnc/pointer.c, x11vnc/scan.c, x11vnc/screen.c, x11vnc/solid.c, + x11vnc/userinput.c, x11vnc/win_utils.c, x11vnc/x11vnc.1, + x11vnc/x11vnc.c, x11vnc/x11vnc_defs.c, x11vnc/xdamage.c, + x11vnc/xrecord.c: x11vnc: close fd > 2 in run_user_command(), -nocmds in crash_debug, + fix 64bit bug for -solid. + +2006-01-10 dscho + + * ChangeLog, libvncserver/main.c, libvncserver/rfbserver.c: + rfbProcessEvents() has to iterate also over clients with sock < 0 to + close them + +2006-01-09 runge + + * ChangeLog, examples/pnmshow24.c, x11vnc/ChangeLog, + x11vnc/Makefile.am, x11vnc/README, x11vnc/allowed_input_t.h, + x11vnc/blackout_t.h, x11vnc/cleanup.c, x11vnc/cleanup.h, + x11vnc/connections.c, x11vnc/connections.h, x11vnc/cursor.c, + x11vnc/cursor.h, x11vnc/enums.h, x11vnc/gui.c, x11vnc/gui.h, + x11vnc/help.c, x11vnc/help.h, x11vnc/inet.c, x11vnc/inet.h, + x11vnc/keyboard.c, x11vnc/keyboard.h, x11vnc/options.c, + x11vnc/options.h, x11vnc/params.h, x11vnc/pointer.c, + x11vnc/pointer.h, x11vnc/rates.c, x11vnc/rates.h, x11vnc/remote.c, + x11vnc/remote.h, x11vnc/scan.c, x11vnc/scan.h, x11vnc/screen.c, + x11vnc/screen.h, x11vnc/scrollevent_t.h, x11vnc/selection.c, + x11vnc/selection.h, x11vnc/solid.c, x11vnc/solid.h, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/user.c, x11vnc/user.h, + x11vnc/userinput.c, x11vnc/userinput.h, x11vnc/util.c, + x11vnc/util.h, x11vnc/win_utils.c, x11vnc/win_utils.h, + x11vnc/winattr_t.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c, + x11vnc/x11vnc.h, x11vnc/x11vnc_defs.c, x11vnc/xdamage.c, + x11vnc/xdamage.h, x11vnc/xevents.c, x11vnc/xevents.h, + x11vnc/xinerama.c, x11vnc/xinerama.h, x11vnc/xkb_bell.c, + x11vnc/xkb_bell.h, x11vnc/xrandr.c, x11vnc/xrandr.h, + x11vnc/xrecord.c, x11vnc/xrecord.h, x11vnc/xwrappers.c, + x11vnc/xwrappers.h: x11vnc: the big split. + +2006-01-08 runge + + * ChangeLog, examples/pnmshow24.c, libvncclient/vncviewer.c, + libvncserver/main.c: fix client non-jpeg/libz builds + +2006-01-06 runge + + * ChangeLog, libvncserver/main.c: rfbRegisterProtocolExtension extMutex was never initialized. + +2005-12-24 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc: enhance -passwdfile features, filetransfer on by default. + +2005-12-22 dscho + + * libvncserver/rfbserver.c: make compile again with pthreads; fix + off-by-one error + +2005-12-19 dscho + + * AUTHORS, ChangeLog, libvncserver/cargs.c, libvncserver/main.c, + libvncserver/rfbserver.c, rfb/rfb.h: introduce -deferptrupdate + (thanks Dave) + +2005-12-19 dscho + + * client_examples/SDLvncviewer.c, libvncclient/sockets.c, + libvncclient/vncviewer.c, libvncserver/main.c, + libvncserver/rfbserver.c, libvncserver/sockets.c: assorted fixes for + MinGW32 + +2005-12-09 dscho + + * ChangeLog, configure.ac, libvncclient/sockets.c, + libvncserver/sockets.c: work around write() returning ENOENT on + Solaris 2.7 + +2005-12-09 dscho + + * examples/mac.c: previous patch turned compile warning in a compile + error; fix that ;-) + +2005-12-08 dscho + + * examples/mac.c: fix compile warnings + +2005-12-07 dscho + + * libvncclient/vncviewer.c: one more memory leak + +2005-12-07 dscho + + * ChangeLog, libvncclient/vncviewer.c, rfb/rfbclient.h: plug memory + leaks + +2005-12-07 dscho + + * client_examples/SDLvncviewer.c: translate keys based on unicode + (much more reliable than sym) + +2005-11-28 runge + + * prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/README, + x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: add -loop option. + +2005-11-25 runge + + * ChangeLog, configure.ac, libvncclient/rfbproto.c, + libvncclient/tight.c, libvncclient/vncviewer.c, + libvncserver/Makefile.am, libvncserver/auth.c, libvncserver/main.c, + libvncserver/private.h, libvncserver/rfbserver.c, + libvncserver/tightvnc-filetransfer/filelistinfo.h, + libvncserver/tightvnc-filetransfer/filetransfermsg.c, + libvncserver/tightvnc-filetransfer/handlefiletransferrequest.c, + libvncserver/tightvnc-filetransfer/rfbtightserver.c, + rfb/rfbclient.h, rfb/rfbproto.h, x11vnc/ChangeLog, + x11vnc/misc/x11vnc_pw, x11vnc/x11vnc.c: fix deadlock from rfbReleaseExtensionIterator(), fix no + libz/libjpeg builds, disable tightvnc-filetransfer if no + libpthread, add --without-pthread option, rm // comments, set + NAME_MAX if not defined, x11vnc: throttle load if fb update + requests not taking place. + +2005-10-23 runge + + * configure.ac, x11vnc/README: configure.ac: test ... == ... not allowed on all unix. + +2005-10-23 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: -filexfer, -slow_fb, -blackout noptr,... + +2005-10-07 dscho + + * TODO: update TODO + +2005-10-07 dscho + + * examples/backchannel.c, libvncserver/rfbserver.c, rfb/rfb.h: The + PseudoEncoding extension code was getting silly: If the client asked for an encoding, and no enabled extension + handled it, LibVNCServer would walk through all extensions, and if + they promised to handle the encoding, execute the extension's + newClient() if it was not NULL. However, if newClient is not NULL, it will be called when a client + connects, and if it returns TRUE, the extension will be enabled. + Since all the state of the extension should be in the client data, + there is no good reason why newClient should return FALSE the first + time (thus not enabling the extension), but TRUE when called just + before calling enablePseudoEncoding(). So in effect, the extension got enabled all the time, even if that + was not necessary. The resolution is to pass a void** to enablePseudoEncoding. This has + the further advantage that enablePseudoEncoding can remalloc() or + free() the data without problems. Though keep in mind that if + enablePseudoEncoding() is called on a not-yet-enabled extension, the + passed data points to NULL. + +2005-10-06 dscho + + * ChangeLog: update ChangeLog for today + +2005-10-06 dscho + + * client_examples/Makefile.am, client_examples/SDLvncviewer.c, + client_examples/backchannel.c, libvncclient/rfbproto.c, + rfb/rfbclient.h: add an extension mechanism for LibVNCClient, modify + the client data handling so that more than one data structure can be + attached, and add an example to speak the client part of the back + channel. + +2005-10-06 dscho + + * examples/Makefile.am, examples/backchannel.c: add BackChannel + extension example + +2005-10-06 dscho + + * libvncclient/zrle.c: fix warning + +2005-10-06 dscho + + * configure.ac, examples/mac.c, libvncserver/main.c, + libvncserver/rfbserver.c, libvncserver/stats.c, + libvncserver/tightvnc-filetransfer/filetransfermsg.c, rfb/rfb.h, + rfb/rfbproto.h: kill BackChannel and CustomClientMessage: the new + extension technique makes these hooks obsolete + +2005-10-06 dscho + + * libvncserver/rfbserver.c, + libvncserver/tightvnc-filetransfer/rfbtightserver.c, rfb/rfb.h: + provide a list of the pseudo encodings understood by the extension + +2005-10-06 dscho + + * contrib/Makefile.am, x11vnc/Makefile.am: DEFINES -> AM_CFLAGS + +2005-10-06 dscho + + * client_examples/Makefile.am, examples/Makefile.am, + libvncclient/Makefile.am, + libvncserver/tightvnc-filetransfer/Makefile.am, test/Makefile.am: do + it right: it is not DEFINES, but AM_CFLAGS + +2005-10-03 dscho + + * ChangeLog, libvncserver/rfbserver.c, + libvncserver/tightvnc-filetransfer/rfbtightserver.c, rfb/rfb.h: add + enablePseudoEncoding() to rfbProtocolExtension + +2005-09-29 dscho + + * TODO, index.html: more TODOs, and an update to the website + +2005-09-28 dscho + + * AUTHORS, ChangeLog, configure.ac, examples/.cvsignore, + examples/Makefile.am, examples/filetransfer.c, + libvncclient/.cvsignore, libvncserver/.cvsignore, + libvncserver/Makefile.am, libvncserver/auth.c, + libvncserver/cargs.c, libvncserver/main.c, + libvncserver/rfbserver.c, libvncserver/sockets.c, + libvncserver/tightvnc-filetransfer/.cvsignore, + libvncserver/tightvnc-filetransfer/Makefile.am, + libvncserver/tightvnc-filetransfer/filelistinfo.c, + libvncserver/tightvnc-filetransfer/filelistinfo.h, + libvncserver/tightvnc-filetransfer/filetransfermsg.c, + libvncserver/tightvnc-filetransfer/filetransfermsg.h, + libvncserver/tightvnc-filetransfer/handlefiletransferrequest.c, + libvncserver/tightvnc-filetransfer/handlefiletransferrequest.h, + libvncserver/tightvnc-filetransfer/rfbtightproto.h, + libvncserver/tightvnc-filetransfer/rfbtightserver.c, rfb/rfb.h: This + monster commit contains support for TightVNC's file transfer + protocol. Thank you very much, Rohit! + +2005-09-27 dscho + + * ChangeLog, libvncserver/cargs.c, libvncserver/main.c, + libvncserver/rfbserver.c, libvncserver/sockets.c, rfb/rfb.h: + Introduce generic protocol extension method. Deprecate the + processCustomClientMessage() method. + +2005-09-27 dscho + + * libvncserver/auth.c, libvncserver/main.c, rfb/rfb.h: Security is + global. This was a misguided attempt to evade a global list. I + eventually saw the light and went with Rohits original approach. + +2005-09-27 dscho + + * client_examples/Makefile.am, client_examples/vnc2mpg.c: support + new ffmpeg version + +2005-09-26 dscho + + * ChangeLog, libvncserver/auth.c, libvncserver/main.c, + libvncserver/rfbserver.c, rfb/rfb.h, rfb/rfbproto.h: support VNC + protocol version 3.7 + +2005-08-22 dscho + + * prepare_x11vnc_dist.sh: for x11vnc standalone package, adaptions + were needed after changing LibVNCServer.spec.in + +2005-08-21 dscho + + * AUTHORS, ChangeLog, LibVNCServer.spec.in: split rpm into three + packages: the library, -devel (headers), and x11vnc + +2005-07-18 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: more gui fixes, gui requests via client_sock, + PASSWD_REQUIRED build opt. + +2005-07-13 runge + + * prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/README, + x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: setup for new release 0.7.3 while I remember how.. + +2005-07-13 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: tweaks for release, fix queue buildup under -viewonly. + +2005-07-11 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: more improvements to gui, scary nopassword warning msg. + +2005-07-09 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: -grab_buster for XGrabServer deadlock; fix scrolls and + copyrect for -clip and -id + +2005-07-07 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: -gui tray now embeds in systray; more improvements to gui. + +2005-07-02 runge + + * ChangeLog, libvncserver/httpd.c, x11vnc/ChangeLog, x11vnc/README, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc: -gui tray mode, httpd.c: check httpListenSock >= 0. + +2005-06-28 dscho + + * ChangeLog, TODO, libvncclient/zrle.c: fix annoying zrle decoding + bug + +2005-06-27 runge + + * ChangeLog, libvncserver/main.c: main.c: fix screen->deferUpdateTime default. + +2005-06-27 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: track keycode state for heuristics, -sloppy_keys, -wmdt, + add -nodbg as option + +2005-06-21 dscho + + * TODO: ZRLE has problems with RealVNC server. Look into it. + +2005-06-21 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: long info and tips when XOpenDisplay fails, reinstate "bad + desktop" for wireframe + +2005-06-18 runge + + * ChangeLog, configure.ac, x11vnc/ChangeLog, x11vnc/README, + x11vnc/x11vnc.1, x11vnc/x11vnc.c: configure.ac: HP-UX and OSF1 no -R, x11vnc: second round of + beta-testing fixes. + +2005-06-14 runge + + * ChangeLog, configure.ac, libvncserver/cursor.c, x11vnc/ChangeLog, + x11vnc/README, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: main.c: XReadScreen check, fix 64bit use of cursors, x11vnc: first + round of beta-testing fixes, RFE's. + +2005-06-11 dscho + + * ChangeLog, configure.ac: no longer complain on Solaris about + missing ar, which was not really missing + +2005-06-06 dscho + + * rfb/rfbproto.h: add definitions from other VNC implementations + +2005-06-06 dscho + + * TODO: more TODOs + +2005-06-06 dscho + + * client_examples/Makefile.am, configure.ac: link to libmp3lame only + if exists + +2005-06-04 runge + + * ChangeLog, libvncserver/main.c, x11vnc/ChangeLog, x11vnc/README, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: main.c: no sraRgnSubstract for copyRect, scrolls for x11vnc -scale; + add -fixscreen + +2005-05-31 runge + + * ChangeLog, libvncserver/main.c, x11vnc/ChangeLog, x11vnc/README, + x11vnc/x11vnc.1, x11vnc/x11vnc.c: main.c: fix copyRect for non-cursor-shape-aware clients. + +2005-05-25 dscho + + * index.html: news + +2005-05-25 runge + + * ChangeLog, prepare_x11vnc_dist.sh, x11vnc/ChangeLog, + x11vnc/README, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc: scrolling: grabserver, autorepeat throttling, mouse wheel, + fix onetile + +2005-05-24 dscho + + * examples/.cvsignore: mac works! + +2005-05-24 dscho + + * Makefile.am, configure.ac: make libvncserver-conf executable the + autoconf way + +2005-05-24 dscho + + * Makefile.am: "make t" now executes the tests + +2005-05-24 dscho + + * libvncclient/Makefile.am: do distribute and depend on zrle.c + +2005-05-24 dscho + + * TODO, libvncclient/rfbproto.c, libvncclient/tight.c, + libvncclient/vncviewer.c, libvncclient/zlib.c, libvncclient/zrle.c, + test/encodingstest.c: implement ZRLE decoding + +2005-05-24 dscho + + * client_examples/SDLvncviewer.c: try 32 bit first + +2005-05-24 dscho + + * examples/example.c, libvncserver/font.c: fix off by one bug + +2005-05-23 dscho + + * libvncclient/tight.c, libvncclient/vncviewer.c: init a structure + *before* using it... + +2005-05-23 dscho + + * libvncclient/tight.c: remove wrong comment + +2005-05-23 dscho + + * libvncclient/rfbproto.c, libvncclient/tight.c, + libvncclient/vncviewer.c, libvncclient/zlib.c, rfb/rfbclient.h: make + zlib and tight handling thread safe (static -> rfbClient) + +2005-05-23 dscho + + * client_examples/vnc2mpg.c: work around bug in ffmpeg + +2005-05-23 dscho + + * ChangeLog, configure.ac: simplify configure (do not check for + malloc(0) bug) + +2005-05-23 dscho + + * client_examples/vnc2mpg.c: fix compilation for + LIBAVCODEC_BUILD==4754 + +2005-05-20 dscho + + * acinclude.m4: finally fix socklen_t problem + +2005-05-18 dscho + + * acinclude.m4: fix socklen_t also for defines + +2005-05-18 dscho + + * ChangeLog, acinclude.m4, rfb/rfb.h: fix compilation for systems + without socklen_t + +2005-05-18 dscho + + * libvncserver/main.c: fix off by one bug + +2005-05-18 dscho + + * examples/vncev.c, libvncclient/listen.c, libvncclient/rfbproto.c, + libvncclient/sockets.c, libvncclient/vncviewer.c, + libvncserver/main.c, libvncserver/rfbserver.c, + libvncserver/vncauth.c, rfb/rfb.h, test/copyrecttest.c, + test/encodingstest.c, vncterm/VNCommand.c: hide strict ansi stuff if + not explicitely turned on; actually use the socklen_t test from + configure.ac + +2005-05-18 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: more scrolling, -scr_term, -wait_ui, -nowait_bog + +2005-05-17 dscho + + * libvncserver/Makefile.am: also distribute private.h... + +2005-05-17 dscho + + * TODO: update TODOs + +2005-05-16 dscho + + * libvncserver/rfbserver.c: fix SIGSEGV when client has incompatible + protocol; release mutex before freeing it + +2005-05-15 dscho + + * ChangeLog, VisualNaCro/configure.ac, VisualNaCro/default8x16.h, + VisualNaCro/nacro.c, client_examples/SDLvncviewer.c, + client_examples/ppmtest.c, contrib/zippy.c, examples/example.c, + examples/fontsel.c, examples/pnmshow.c, examples/pnmshow24.c, + examples/radon.h, examples/storepasswd.c, examples/vncev.c, + libvncclient/listen.c, libvncclient/rfbproto.c, + libvncclient/sockets.c, libvncclient/vncviewer.c, + libvncserver/auth.c, libvncserver/cargs.c, libvncserver/corre.c, + libvncserver/cursor.c, libvncserver/d3des.c, libvncserver/font.c, + libvncserver/hextile.c, libvncserver/httpd.c, libvncserver/main.c, + libvncserver/private.h, libvncserver/rfbregion.c, + libvncserver/rfbserver.c, libvncserver/rre.c, + libvncserver/selbox.c, libvncserver/sockets.c, + libvncserver/tight.c, libvncserver/translate.c, + libvncserver/vncauth.c, libvncserver/zlib.c, libvncserver/zrle.c, + libvncserver/zrleencodetemplate.c, libvncserver/zrleoutstream.c, + rfb/default8x16.h, rfb/rfb.h, rfb/rfbproto.h, test/copyrecttest.c, + test/cursortest.c, test/encodingstest.c, vncterm/VNCommand.c, + vncterm/VNConsole.c: ANSIfy, fix some warnings from Linus' sparse + +2005-05-15 runge + + * libvncserver/main.c, libvncserver/rfbserver.c: libvncserver/{main.c,rfbserver.c}: fix a couple more CopyRect + memory leaks + +2005-05-14 dscho + + * .cvsignore, examples/.cvsignore, test/.cvsignore, + x11vnc/misc/.cvsignore: more files to ignore + +2005-05-14 dscho + + * ChangeLog, examples/example.c, libvncserver/main.c, + libvncserver/rfbserver.c: fix memory leaks detected using valgrind + +2005-05-14 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: more improvements to -scrollcopyrect and -xkb modes. + +2005-05-07 dscho + + * ChangeLog, VisualNaCro/nacro.c, VisualNaCro/nacro.h, + examples/example.c, examples/fontsel.c, libvncserver/httpd.c, + libvncserver/main.c, libvncserver/rfbserver.c, + libvncserver/sockets.c, rfb/rfb.h, test/cursortest.c, + vncterm/LinuxVNC.c, vncterm/VNConsole.c, x11vnc/x11vnc.c: + socketInitDone -> socketState + +2005-05-03 runge + + * ChangeLog, configure.ac, libvncserver/main.c: libvncserver/main.c: fix memory leak in + rfbDoCopyRect/rfbScheduleCopyRect; configure.ac tweaks. + +2005-05-03 runge + + * ChangeLog, configure.ac, x11vnc/ChangeLog, x11vnc/README, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc: -scrollcopyrect/RECORD, etc. configure.ac: customizations + for x11vnc pkg + +2005-04-27 dscho + + * ChangeLog, libvncserver/rfbserver.c: clear requested region after + handling it + +2005-04-19 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/misc/README, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc: -wireframe, -wirecopyrect, -privremote, -safer, -nocmd, + -unsafe, -noviewonly + +2005-04-12 runge + + * x11vnc/ChangeLog, x11vnc/misc/Makefile.am, x11vnc/misc/ranfb.pl: x11vnc: add rawfb setup example misc/ranfb.pl + +2005-04-11 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/misc/slide.pl, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc: fix some -rawfb bugs, add setup:cmd + +2005-04-10 runge + + * ChangeLog, configure.ac, prepare_x11vnc_dist.sh, + x11vnc/ChangeLog, x11vnc/Makefile.am, x11vnc/README, + x11vnc/misc/Makefile.am, x11vnc/misc/README, + x11vnc/misc/blockdpy.c, x11vnc/misc/dtVncPopup, + x11vnc/misc/rx11vnc, x11vnc/misc/rx11vnc.pl, x11vnc/misc/shm_clear, + x11vnc/misc/slide.pl, x11vnc/misc/vcinject.pl, + x11vnc/misc/x11vnc_loop, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: -rawfb, -pipeinput, -xtrap, -flag, ... + +2005-04-04 runge + + * ChangeLog, configure.ac, x11vnc/ChangeLog, x11vnc/README, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc: use DEC-XTRAP on legacy X11R5, -shiftcmap, -http + +2005-03-29 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: fix event leaks, build-time customizations, -nolookup + +2005-03-20 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: scale cursors, speed up some scaling, alt arrows, -norepeat + N + +2005-03-12 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: X DAMAGE support, -clip WxH+X+Y, identd. + +2005-03-09 dscho + + * test/encodingstest.c: fix compilation when no libz is available + +2005-03-07 dscho + + * configure.ac, rfb/rfbproto.h: do the in_addr_t stuff correctly... + +2005-03-07 dscho + + * configure.ac: check for in_addr_t + +2005-03-06 dscho + + * client_examples/SDLvncviewer.c: fix for older SDL versions + +2005-03-05 runge + + * ChangeLog, Makefile.am, configure.ac, libvncserver/Makefile.am: autoconf: rpm -> rpmbuild and echo -n -> printf + +2005-03-05 runge + + * ChangeLog, libvncclient/sockets.c, libvncserver/cargs.c, + libvncserver/httpd.c, libvncserver/main.c, libvncserver/sockets.c, + rfb/rfb.h, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: add '-listen ipaddr' option + +2005-03-01 dscho + + * client_examples/ppmtest.c: do not crash when /tmp is not writable + +2005-02-23 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: final changes for 0.7.1 release. + +2005-02-22 runge + + * x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: -nap is now the default, version str 0.7.1. + +2005-02-14 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: -users lurk=, -solid for cde, -gui ez,.. beginner mode. + +2005-02-11 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc -input to fine tune allow user input. per-client settings + -R + +2005-02-09 runge + + * ChangeLog, configure.ac, x11vnc/ChangeLog, x11vnc/README, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc -users, fix -solid on gnome/kde, configure.ac pwd.h wait.h + and utmpx.h + +2005-02-07 runge + + * ChangeLog, prepare_x11vnc_dist.sh: prepare_x11vnc_dist.sh: few tweaks for next release + +2005-02-07 runge + + * ChangeLog, configure.ac: configure.ac: --with-jpeg=DIR --with-zlib=DIR, /usr/sfw + +2005-02-05 runge + + * ChangeLog, tightvnc-1.3dev5-vncviewer-alpha-cursor.patch, + x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc -solid color, -opts; tightvnc unix viewer alpha patch + +2005-01-25 dscho + + * TODO, libvncserver/rfbserver.c: 10l: really fix preferredEncoding + set from outside + +2005-01-24 runge + + * x11vnc/x11vnc.c: whoops, test version of x11vnc.c leaked out... + +2005-01-24 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: sync with new cursor mechanism, -timeout, -noalphablend, try :0 if + no other info + +2005-01-23 dscho + + * test/cursortest.c: test Floyd-Steinberg dither for alpha masks + +2005-01-21 dscho + + * TODO, libvncserver/cursor.c, rfb/rfb.h: implemented + Floyd-Steinberg dither in order to rfbMakeMaskFromAlphaSource + +2005-01-21 dscho + + * VisualNaCro/recorder.pl: use Getopt + +2005-01-21 dscho + + * libvncclient/vncviewer.c: if no argc & argv are passed, honour the + serverHost&serverPort which was set by the application + +2005-01-20 dscho + + * test/cursortest.c: no need to strdup for MakeXCursor + +2005-01-20 dscho + + * ChangeLog, libvncserver/cursor.c: disappearing cursor fixed & + debug message purged + +2005-01-20 dscho + + * libvncserver/cursor.c, libvncserver/main.c, + libvncserver/rfbserver.c: fix disappearing cursor + +2005-01-19 dscho + + * libvncserver/cursor.c: redraw region under old cursor even if the + old cursor doesn't have to be freed. + +2005-01-19 dscho + + * TODO: a granted wish has several children ;-) + +2005-01-19 dscho + + * test/encodingstest.c: fix test (don't show cursor...); correctly + set the encodings in the client; really test 20 seconds + +2005-01-19 dscho + + * libvncserver/cursor.c: oops, a debug message slipped through + +2005-01-18 dscho + + * ChangeLog, contrib/zippy.c, examples/example.c, + libvncserver/cursor.c, libvncserver/main.c, + libvncserver/rfbserver.c, libvncserver/selbox.c, rfb/rfb.h, + vncterm/VNConsole.c, x11vnc/x11vnc.c: pointerClient was still + static. do not make requestedRegion empty without reason. the cursor handling for clients which don't handle CursorShape + updates was completely broken. It originally was very complicated + for performance reasons, however, in most cases it made performance + even worse, because at idle times there was way too much checking + going on, and furthermore, sometimes unnecessary updates were + inevitable. The code now is much more elegant: the ClientRec structure knows + exactly where it last painted the cursor, and the ScreenInfo + structure knows where the cursor shall be. As a consequence there is no more rfbDrawCursor()/rfbUndrawCursor(), + no more dontSendFramebufferUpdate, and no more isCursorDrawn. It is + now possible to have clients which understand CursorShape updates + and clients which don't at the same time. rfbSetCursor no longer has the option freeOld; this is obsolete, as + the cursor structure knows what to free and what not. + +2005-01-18 dscho + + * libvncserver/rfbregion.c, rfb/rfbregion.h: add convenience + function to clip using x2,y2 instead of w,h + +2005-01-18 dscho + + * test/Makefile.am, test/cursortest.c: add a cursor test + (interactive for now) + +2005-01-18 dscho + + * VisualNaCro/.cvsignore: more ignorance + +2005-01-17 dscho + + * index.html: LibVNCClient is included + +2005-01-17 dscho + + * index.html: alpha cursor and VisualNaCro news + +2005-01-16 dscho + + * VisualNaCro/.cvsignore: ignore generated files + +2005-01-16 runge + + * ChangeLog, libvncserver/cursor.c, rfb/rfb.h, x11vnc/ChangeLog, + x11vnc/README, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: add cursor alphablending to rfb.h cursor.c, x11vnc -alphablend + -snapfb etc.. + +2005-01-14 dscho + + * VisualNaCro/Makefile.am, VisualNaCro/default8x16.h, + VisualNaCro/nacro.c, VisualNaCro/nacro.h, VisualNaCro/recorder.pl: + fix most TODOs; recorder.pl now actually records something; add + nacro.pm to package + +2005-01-14 dscho + + * examples/example.c: reverted segfault fix; use rfbDrawCharWithClip + +2005-01-14 dscho + + * libvncserver/font.c: add comment "if col=bcol, assume background + is transparent" + +2005-01-14 dscho + + * libvncserver/main.c: fix comment + +2005-01-14 dscho + + * libvncserver/rfbserver.c: close socket in ClientConnectionGone + +2005-01-14 dscho + + * configure.ac: new version... + +2005-01-14 dscho + + * VisualNaCro/AUTHORS, VisualNaCro/ChangeLog, + VisualNaCro/Makefile.am, VisualNaCro/NEWS, VisualNaCro/README, + VisualNaCro/autogen.sh, VisualNaCro/configure.ac, + VisualNaCro/nacro.c, VisualNaCro/nacro.h, VisualNaCro/recorder.pl: + VisualNacro, a visual macro recorder for VNC. Alpha version + +2005-01-14 dscho + + * libvncserver/main.c, rfb/rfb.h: return value of rfbProcessEvents + tells if an update was pending + +2005-01-14 dscho + + * libvncserver/font.c: fix segfault when trying to write outside of + frameBuffer + +2005-01-14 dscho + + * libvncclient/vncviewer.c: argc and argv may be zero (which means + to ignore them) + +2005-01-03 dscho + + * libvncserver/main.c, libvncserver/rfbserver.c, rfb/rfb.h: add hook + to allow for custom client messages + +2004-12-27 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/tkx11vnc, + x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: improve XFIXES cursor transparency, more remote-control + cmds. + +2004-12-23 runge + + * x11vnc/README, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: need tkx11vnc and tkx11vnc.h in x11vnc package + +2004-12-23 runge + + * x11vnc/Makefile.am: x11vnc: need tkx11vnc and tkx11vnc.h in x11vnc package + +2004-12-23 runge + + * x11vnc/Makefile.am: x11vnc: need tkx11vnc and tkx11vnc.h in x11vnc package + +2004-12-23 runge + + * prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/README, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc: minor tweaks for x11vnc 0.7 file release + +2004-12-20 dscho + + * index.html: Ooh, I'm lazy. Some news were added retroactively. + +2004-12-20 dscho + + * ChangeLog, configure.ac, index.html: released 0.7 + +2004-12-20 dscho + + * examples/mac.c: compile fix on mac; still untested... + +2004-12-20 dscho + + * test/Makefile.am: fix for MinGW + +2004-12-20 runge + + * x11vnc/README, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, + x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: minor tweaks for 0.7 file release + +2004-12-20 runge + + * ChangeLog, libvncserver/cursor.c, x11vnc/ChangeLog, + x11vnc/README, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc: synchronous mode for -remote, string cleanup + +2004-12-17 dscho + + * libvncserver/cursor.c: don't mix up width & height! + +2004-12-17 runge + + * ChangeLog, test/encodingstest.c, x11vnc/ChangeLog, x11vnc/README, + x11vnc/tkx11vnc, x11vnc/tkx11vnc.h, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc: XFIXES cursorshape, XRANDR resize, remote control, gui + +2004-12-01 dscho + + * rfb/rfb.h: fix compilation on non MinGW32... + +2004-12-01 dscho + + * ChangeLog, TODO, client_examples/Makefile.am, + client_examples/SDLvncviewer.c, configure.ac, contrib/Makefile.am, + examples/Makefile.am, examples/vncev.c, libvncclient/listen.c, + libvncclient/rfbproto.c, libvncclient/sockets.c, + libvncclient/vncviewer.c, libvncserver-config.in, + libvncserver/httpd.c, libvncserver/main.c, libvncserver/sockets.c, + rfb/rfb.h, rfb/rfbproto.h, test/Makefile.am, vncterm/Makefile.am, + x11vnc/Makefile.am: support MinGW32! + +2004-12-01 dscho + + * AUTHORS, libvncclient/listen.c, libvncclient/sockets.c, + libvncclient/vncviewer.c: use rfbClientErr to log errors, check if + calloc succeded (both hinted by Andre Leiradella) + +2004-11-30 dscho + + * ChangeLog, libvncclient/sockets.c: fix long reads (in some events + of success, no TRUE was returned) + +2004-11-30 dscho + + * rfb/rfbproto.h: add EncodingUltra; it is not implemented in the + libraries yet, so this is just a place holder + +2004-10-16 dscho + + * TODO: TODOs from encodingstest + +2004-10-16 dscho + + * test/.cvsignore: tight-1 -> encodingstest + +2004-10-16 dscho + + * test/Makefile.am, test/encodingstest.c, test/tight-1.c: rename + tight-1.c into encodingstest.c, fixing it in the process. It now + passes all encodings except corre (broken) and zrle (not yet + implemented in libvncclient) + +2004-10-16 dscho + + * libvncclient/rfbproto.c, libvncclient/sockets.c, + libvncclient/tight.c, libvncclient/vncviewer.c, + libvncclient/zlib.c, rfb/rfbclient.h: move read buffer to rfbClient + structure (thread safety); make rfbClientLog overrideable + +2004-10-15 dscho + + * test/tight-1.c: compiles, 1st run is okay, 2nd and subsequent give + errors. Evidently, libvncclient is not yet reentrant (or + threadsafe). + +2004-10-15 dscho + + * libvncclient/vncviewer.c: no need to modify argv + +2004-10-15 dscho + + * TODO: ideas + +2004-10-15 dscho + + * test/tight-1.c: compiling, non functional version of a unit test + for encodings + +2004-10-04 dscho + + * TODO: cursor problem + +2004-10-02 dscho + + * libvncserver/rfbserver.c: release client list mutex earlier + +2004-09-14 dscho + + * index.html, success.html: added success stories and link to + x11vnc's home + +2004-09-14 dscho + + * success.html: add success stories (only one at the moment) + +2004-09-07 dscho + + * index.html: new API + +2004-09-03 dscho + + * libvncserver/rfbregion.c: output only via rfbErr + +2004-09-03 dscho + + * libvncserver-config.in: libvncserver.a is in libvncserver/ now + +2004-09-01 runge + + * ChangeLog, prepare_x11vnc_dist.sh, x11vnc/ChangeLog, + x11vnc/README, x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: new pointer input handling algorithm; x11vnc pkg installs + java viewer + +2004-08-30 dscho + + * ChangeLog: API changes + +2004-08-30 dscho + + * contrib/zippy.c, examples/colourmaptest.c, examples/example.c, + examples/pnmshow.c, examples/pnmshow24.c, examples/storepasswd.c, + examples/vncev.c, libvncclient/rfbproto.c, libvncserver/auth.c, + libvncserver/cargs.c, libvncserver/corre.c, libvncserver/cursor.c, + libvncserver/d3des.c, libvncserver/d3des.h, libvncserver/font.c, + libvncserver/hextile.c, libvncserver/httpd.c, libvncserver/main.c, + libvncserver/rfbserver.c, libvncserver/rre.c, + libvncserver/selbox.c, libvncserver/sockets.c, + libvncserver/stats.c, libvncserver/tight.c, + libvncserver/translate.c, libvncserver/vncauth.c, + libvncserver/zlib.c, libvncserver/zrle.c, rfb/rfb.h, + rfb/rfbproto.h, test/cargstest.c, test/copyrecttest.c, + vncterm/LinuxVNC.c, vncterm/VNConsole.c, vncterm/VNConsole.h, + x11vnc/x11vnc.c: global structures/functions should have "rfb", + "sra" or "zrle" as prefix, while structure members should not + +2004-08-30 dscho + + * client_examples/Makefile.am: my ffmpeg was compiled with + mp3lame... + +2004-08-30 runge + + * ChangeLog, configure.ac, x11vnc/ChangeLog, x11vnc/README, + x11vnc/x11vnc.1, x11vnc/x11vnc.c: x11vnc: -cursor change shape handling, configure.ac: add more + macros for X extensions + +2004-08-17 dscho + + * index.html: news: QEMU patch v6 + +2004-08-15 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/README, x11vnc/x11vnc.1, + x11vnc/x11vnc.c: x11vnc: -overlay to fix colors with Sun 8+24 overlay visuals. -sid + option. + +2004-08-04 runge + + * x11vnc/README, x11vnc/x11vnc.1: fix XKBlib.h detection on *BSD, x11vnc: manpage and README + +2004-08-04 runge + + * ChangeLog, configure.ac, prepare_x11vnc_dist.sh, + x11vnc/ChangeLog, x11vnc/Makefile.am, x11vnc/x11vnc.c: fix XKBlib.h detection on *BSD, x11vnc: manpage and README + +2004-07-31 runge + + * x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: adjust version number and output + +2004-07-31 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: -cursorpos now the default, fix cursorpos + scaling bug. + +2004-07-29 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: -add_keysyms dynamically add missing keysyms to X server + +2004-07-27 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: -xkb (XKEYBOARD modtweak), -skip_keycodes, multi lines in + x11vncrc + +2004-07-19 runge + + * x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: ignore keysyms >4 for a keycode, add lastmod to -help, + -version + +2004-07-16 runge + + * ChangeLog, configure.ac, x11vnc/ChangeLog, x11vnc/x11vnc.c: modtweak is now the default for x11vnc; check X11/XKBlib.h in + configure.ac + +2004-07-11 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: -norepeat to turn off X server autorepeat when clients + exist. + +2004-07-05 runge + + * x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: extend -allow to re-read a file with allowed IP addresses. + +2004-07-02 runge + + * x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: improve scaled grid calc to regain text compression. add + :pad option + +2004-06-30 dscho + + * libvncclient/vncviewer.c: do not use GNU-only getline + +2004-06-28 runge + + * x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: round scaled width to multiple of 4 to make vncviewer + happy. + +2004-06-27 runge + + * x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: speed up scaling a bit, add no blending option to -scale + +2004-06-26 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: add "-scale fraction" for global server-side scaling. + +2004-06-18 dscho + + * libvncserver/zrleencodetemplate.c, test/tight-1.c, + vncterm/LinuxVNC.c, vncterm/VNCommand.c, vncterm/VNConsole.c, + vncterm/example.c: convert c++ comments to c comments + +2004-06-18 dscho + + * libvncserver/sockets.c: debug + +2004-06-18 dscho + + * client_examples/SDLvncviewer.c: cleanups; libvncclient supports + -encodings already + +2004-06-18 dscho + + * client_examples/vnc2mpg.c: cleanups; support vncrec'orded files as + input + +2004-06-18 dscho + + * examples/example.c, examples/pnmshow.c, examples/pnmshow24.c: now + that the examples reside in a subdirectory, the classes path has to + be adapted + +2004-06-18 dscho + + * rfb/rfbclient.h: more comments; support playing vncrec'orded files + +2004-06-18 dscho + + * libvncclient/rfbproto.c, libvncclient/sockets.c, + libvncclient/vncviewer.c: support password reading with getpass(); + support -play to play vncrec'orded files + +2004-06-17 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: simple ~/.x11vncrc config file support, -rc, -norc + +2004-06-15 dscho + + * TODO: fixed + +2004-06-15 dscho + + * libvncclient/hextile.c: fix silly hextile bug + +2004-06-15 dscho + + * libvncclient/rfbproto.c: recognize more encodings + +2004-06-15 dscho + + * libvncclient/sockets.c: debug + +2004-06-15 dscho + + * libvncserver/rfbserver.c: fix CoRRE with maxRectsPerUpdate bug + +2004-06-15 dscho + + * libvncclient/rfbproto.c: fix silly update bug with raw encoding + +2004-06-12 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: -clear_mods -clear_keys -storepasswd, add RFB_SERVER_IP + RFB_SERVER_PORT to -accept/-gone + +2004-06-08 dscho + + * client_examples/Makefile.am, configure.ac: fix compilation on IRIX + +2004-06-08 dscho + + * configure.ac: fix test for sdl + +2004-06-08 dscho + + * client_examples/SDLvncviewer.c: fix compilation on MacOSX + +2004-06-07 dscho + + * index.html: layout and wording fix + +2004-06-07 dscho + + * index.html: more news + +2004-06-07 dscho + + * .cvsignore, prepare_x11vnc_dist.sh: now that it is released, + increment x11vnc's version + +2004-06-07 dscho + + * .cvsignore, client_examples/.cvsignore, libvncclient/.cvsignore, + libvncserver/.cvsignore, test/.cvsignore, x11vnc/.cvsignore: all + this moving and renaming needs changes in the cvsignores, too! + +2004-06-07 dscho + + * LibVNCServer.spec.in, Makefile.am, libvncserver.spec.in, + prepare_x11vnc_dist.sh: fix bug 968264: make rpm did not work with + x11vnc package + +2004-06-07 dscho + + * client_examples/Makefile.am, client_examples/vnc2mpg.c, + configure.ac: add vnc2mpg, a program which makes a movie from a VNC + desktop using FFMPEG + +2004-06-07 dscho + + * TODO, client_examples/SDLvncviewer.c: added -encodings + +2004-06-07 dscho + + * ChangeLog, TODO, libvncserver/cursor.c, rfb/rfb.h: fix cursor + trails (when not using cursor encoding and moving the cursor, the + redrawn part of the screen didn't get updated, and so left cursor + trails). + +2004-06-07 dscho + + * client_examples/SDLvncviewer.c: add mouse button handling + +2004-06-07 dscho + + * ChangeLog, Makefile.am, TODO, client_examples/Makefile.am, + client_examples/SDLvncviewer.c, client_examples/ppmtest.c, + configure.ac, contrib/Makefile.am, examples/Makefile.am, + examples/blooptest.c, examples/copyrecttest.c, + libvncclient/Makefile.am, libvncclient/client_test.c, + libvncclient/sockets.c, libvncclient/vncviewer.c, + libvncserver/Makefile.am, prepare_x11vnc_dist.sh, rfb/rfbclient.h, + test/Makefile.am, test/blooptest.c, test/copyrecttest.c, + test/tight-1.c, x11vnc/Makefile.am: add client_examples/, add + SDLvncviewer, libvncclient API changes, suppress automake CFLAGS + nagging + +2004-06-06 runge + + * ChangeLog, x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: rearrange file for easier maintenance, add RFB_CLIENT_COUNT + to -accept/-gone + +2004-05-28 runge + + * x11vnc/x11vnc.c: [no log message] + +2004-05-27 runge + + * ChangeLog, libvncserver/main.c, libvncserver/rfbserver.c, + prepare_x11vnc_dist.sh, x11vnc/ChangeLog, x11vnc/x11vnc.c: x11vnc: view-only plain passwd: -viewpasswd and 2nd line of + -passwdfile + +2004-05-25 dscho + + * prepare_x11vnc_dist.sh: a script which automatically converts a + few files to make an x11vnc release + +2004-05-25 dscho + + * configure.ac: -lvncserver is not default now + +2004-05-25 dscho + + * ChangeLog, Makefile.am, auth.c, cargs.c, configure.ac, + contrib/ChangeLog, contrib/Makefile.am, contrib/x11vnc.c, corre.c, + cursor.c, cutpaste.c, d3des.c, d3des.h, draw.c, + examples/Makefile.am, examples/regiontest.c, font.c, hextile.c, + httpd.c, libvncclient/rfbproto.c, libvncserver/Makefile.am, + libvncserver/auth.c, libvncserver/cargs.c, libvncserver/config.h, + libvncserver/corre.c, libvncserver/cursor.c, + libvncserver/cutpaste.c, libvncserver/d3des.c, + libvncserver/d3des.h, libvncserver/draw.c, libvncserver/font.c, + libvncserver/hextile.c, libvncserver/httpd.c, libvncserver/main.c, + libvncserver/rfbconfig.h, libvncserver/rfbregion.c, + libvncserver/rfbserver.c, libvncserver/rre.c, + libvncserver/selbox.c, libvncserver/sockets.c, + libvncserver/stats.c, libvncserver/tableinit24.c, + libvncserver/tableinitcmtemplate.c, + libvncserver/tableinittctemplate.c, + libvncserver/tabletrans24template.c, + libvncserver/tabletranstemplate.c, libvncserver/tight.c, + libvncserver/translate.c, libvncserver/vncauth.c, + libvncserver/zlib.c, libvncserver/zrle.c, + libvncserver/zrleencodetemplate.c, libvncserver/zrleoutstream.c, + libvncserver/zrleoutstream.h, libvncserver/zrlepalettehelper.c, + libvncserver/zrlepalettehelper.h, libvncserver/zrletypes.h, main.c, + rfbregion.c, rfbserver.c, rre.c, selbox.c, sockets.c, stats.c, + tableinit24.c, tableinitcmtemplate.c, tableinittctemplate.c, + tabletrans24template.c, tabletranstemplate.c, test/Makefile.am, + tight.c, translate.c, vncauth.c, vncterm/Makefile.am, + x11vnc/ChangeLog, x11vnc/Makefile.am, x11vnc/x11vnc.c, zlib.c, + zrle.c, zrleencodetemplate.c, zrleoutstream.c, zrleoutstream.h, + zrlepalettehelper.c, zrlepalettehelper.h, zrletypes.h: move the + library into libvncserver/, x11vnc into x11vnc/ + +2004-05-22 runge + + * ChangeLog, contrib/ChangeLog, contrib/x11vnc.c, httpd.c: x11vnc: -gone, -passwdfile, -o logfile; add view-only to -accept + +2004-05-14 runge + + * contrib/x11vnc.c: x11vnc: more -inetd fixes. + +2004-05-14 runge + + * contrib/ChangeLog, contrib/x11vnc.c: x11vnc: less fprintf under -q so '-q -inetd' has no stderr output. + +2004-05-13 runge + + * contrib/ChangeLog, contrib/x11vnc.c: x11vnc: improvements to -accept popup: yes/no buttons and timeout. + +2004-05-08 runge + + * contrib/ChangeLog, contrib/x11vnc.c: x11vnc: clean up -Wall warnings. + +2004-05-08 runge + + * ChangeLog, contrib/ChangeLog, contrib/x11vnc.c: x11vnc: add -accept some-command/xmessage/popup + +2004-05-06 runge + + * ChangeLog, contrib/ChangeLog, contrib/x11vnc.c: x11vnc: mouse -> keystroke and keystroke -> mouse remappings. + +2004-05-05 dscho + + * rfbserver.c, sockets.c: prevent segmentation fault when requested + area is too big; if select is interrupted while WriteExact, just try + again. + +2004-04-28 runge + + * ChangeLog, contrib/ChangeLog, contrib/x11vnc.c: x11vnc: add -auth, more -cursorpos and -nofb work + +2004-04-20 runge + + * ChangeLog, contrib/ChangeLog, contrib/x11vnc.c: x11vnc: add -cursorpos for Cursor Position Updates, and -sigpipe + +2004-04-19 dscho + + * main.c: ignore SIGPIPE the correct way + +2004-04-13 runge + + * ChangeLog, contrib/ChangeLog, contrib/x11vnc.c: x11vnc: do not send selection unless all clients are in RFB_NORMAL + state. increase rfbMaxClientWait when threaded to avoid + ReadExact() timeouts for some viewers. + +2004-04-12 dscho + + * configure.ac: fix compilation without jpeg and a certain autoconf + version + +2004-04-08 runge + + * ChangeLog, configure.ac, contrib/ChangeLog, contrib/x11vnc.c: x11vnc options -blackout, -xinerama, -xwarppointer. check cargs. modify configure.ac to pick up -lXinerama + +2004-03-24 dscho + + * examples/pnmshow.c: add support for pgm and pbm (8-bit and 1-bit + grayscale images) + +2004-03-22 dscho + + * ChangeLog, cargs.c, test/Makefile.am, test/cargstest.c: fix + cargs.c: arguments were not correctly purged. + +2004-03-15 dscho + + * ChangeLog, libvncserver-config.in: fix --link for + libvncserver-config + +2004-03-11 runge + + * ChangeLog, contrib/ChangeLog, contrib/x11vnc.c: x11vnc options -vncconnect, -connect, -remap, -debug_pointer, and -debug_keyboard add reverse connections, keysym remapping, and debug output option + +2004-02-29 dscho + + * index.html: link to pre.tar.gz, mention valgrind + +2004-02-29 dscho + + * index.html: update on news + +2004-02-29 dscho + + * ChangeLog, rfbregion.c: fixed valgrind warning + +2004-02-20 runge + + * ChangeLog, contrib/ChangeLog, contrib/x11vnc.c: x11vnc options -nosel -noprimary -visual. add clipboard/selection handling. add visual option (mostly for testing and workarounds). improve shm cleanup on failures. + +2004-02-04 dscho + + * AUTHORS, ChangeLog, examples/colourmaptest.c, + examples/copyrecttest.c, examples/example.c, examples/simple.c, + examples/simple15.c, examples/vncev.c: make examples g++ + compileable, thanks to Juan Jose Costello + +2004-01-30 dscho + + * ChangeLog, rfbserver.c: memory leaks fixed + +2004-01-29 dscho + + * ChangeLog, Makefile.am, configure.ac, tight.c, zlib.c, zrle.c, + zrleencodetemplate.c, zrleoutstream.c, zrleoutstream.h, + zrlepalettehelper.c, zrlepalettehelper.h: Honour the check for libz, + libjpeg again + +2004-01-21 dscho + + * ChangeLog, cargs.c, main.c, rfb/rfb.h, rfbserver.c: add + "-progressive height" option to make SendFramebufferUpdate + "preemptive" + +2004-01-21 dscho + + * ChangeLog: update + +2004-01-21 dscho + + * examples/.cvsignore: ignore all test programs + +2004-01-21 dscho + + * examples/Makefile.am, examples/copyrecttest.c: add a simple + example how to use rfbDoCopyRect + +2004-01-21 dscho + + * main.c, rfb/rfb.h: ignore SIGPIPE by default; it is handled via + EPIPE + +2004-01-21 dscho + + * cursor.c: do not send unnecessary updated because of cursor + drawing + +2004-01-19 runge + + * ChangeLog, contrib/ChangeLog, contrib/x11vnc.c: handle mouse button number mismatch improved pointer input handling during drags, etc. somewhat faster copy_tiles() -> copy_tiles() x11vnc options -buttonmap -old_pointer -old_copytile + +2004-01-19 dscho + + * configure.ac: 0.6 is out... version is 0.7pre now + +2004-01-19 dscho + + * vncterm/Makefile.am: inherit CFLAGS + +2004-01-19 dscho + + * vncterm/VNConsole.c: fix usage of non-existent attribute buffer + +2004-01-16 dscho + + * ChangeLog, cargs.c, configure.ac, contrib/Makefile.am, + rfbserver.c, vncauth.c: compile fix for cygwin + +2004-01-10 runge + + * ChangeLog, contrib/ChangeLog, contrib/x11vnc.c: x11vnc options -allow, -localhost, -nodragging, -input_skip minimize memory usage under -nofb + +2003-12-09 dscho + + * libvncclient/hextile.c: fix compilation with Mac OSX: preprocessor + can't do recursive macros + +2003-12-09 runge + + * ChangeLog, configure.ac, contrib/ChangeLog, contrib/x11vnc.c: + x11vnc: XBell events, -nofb, -notruecolor, misc. cleaning + +2003-11-27 dscho + + * index.html: fixed link + +2003-11-11 dscho + + * ChangeLog, contrib/x11vnc.c: -inetd, -noshm and friends added + +2003-11-07 dscho + + * ChangeLog, README.cvs, configure.ac: release 0.6 + +2003-10-08 dscho + + * zrle.c: fix gcc 2.x compilation: no C99 + +2003-09-11 markmc + + * ChangeLog, Makefile.in, aclocal.m4, bootstrap.sh, + classes/.cvsignore, classes/Makefile.in, config.h.in, configure, + contrib/Makefile.in, depcomp, examples/Makefile.in, install-sh, + libvncclient/Makefile.in, missing, mkinstalldirs, test/.cvsignore, + test/Makefile.in, vncterm/Makefile.in: 2002-09-11 Mark McLoughlin + * Makefile.in, */Makefile.in, aclocal.m4, bootstrap.sh, config.h.in, configure, depcomp, install-sh, missing, mkinstalldirs, Removed auto-generated files from CVS. + +2003-09-11 markmc + + * ChangeLog, NEWS, rdr/Exception.h, rdr/FdInStream.cxx, + rdr/FdInStream.h, rdr/FdOutStream.cxx, rdr/FdOutStream.h, + rdr/FixedMemOutStream.h, rdr/InStream.cxx, rdr/InStream.h, + rdr/MemInStream.h, rdr/MemOutStream.h, rdr/NullOutStream.cxx, + rdr/NullOutStream.h, rdr/OutStream.h, rdr/ZlibInStream.cxx, + rdr/ZlibInStream.h, rdr/ZlibOutStream.cxx, rdr/ZlibOutStream.h, + rdr/types.h, zrle.cxx, zrleDecode.h, zrleEncode.h: 2003-09-11 Mark + McLoughlin * rdr/Exception.h, rdr/FdInStream.cxx, rdr/FdInStream.h, rdr/FdOutStream.cxx, rdr/FdOutStream.h, + rdr/FixedMemOutStream.h, rdr/InStream.cxx, rdr/InStream.h, + rdr/MemInStream.h, rdr/MemOutStream.h, rdr/NullOutStream.cxx, + rdr/NullOutStream.h, rdr/OutStream.h, rdr/ZlibInStream.cxx, + rdr/ZlibInStream.h, rdr/ZlibOutStream.cxx, rdr/ZlibOutStream.h, + rdr/types.h, zrle.cxx, zrleDecode.h, zrleEncode.h: remove original C++ ZRLE implementation. Its been ported to C. * NEWS: copy the existing ChangeLog to here and make this a more detailed ChangeLog. + +2003-09-08 dscho + + * AUTHORS, ChangeLog, Makefile.am, Makefile.in, autogen.sh, + classes/Makefile.in, config.h.in, configure, configure.ac, + contrib/Makefile.in, examples/Makefile.in, + libvncclient/Makefile.in, rfb/rfb.h, rfb/rfbproto.h, rfbserver.c, + test/Makefile.in, vncterm/Makefile.in, zrle.c, + zrleencodetemplate.c, zrleoutstream.c, zrleoutstream.h, + zrlepalettehelper.c, zrlepalettehelper.h, zrletypes.h: ZRLE no + longer uses C++, but C + +2003-08-29 dscho + + * ChangeLog, Makefile.in, configure, configure.ac, + libvncclient/Makefile.in, test/Makefile.in, vncterm/Makefile.in: + added --disable-cxx flag to configure + +2003-08-18 dscho + + * contrib/x11vnc.c: Karl Runge: 8bpp handling now much better, + single window also, many improvements + +2003-08-18 dscho + + * httpd.c, main.c, rfbserver.c, sockets.c: socklen_t -> size_t + +2003-08-18 dscho + + * Makefile.in, aclocal.m4, classes/Makefile.in, config.h.in, + contrib/Makefile.in, examples/Makefile.in, vncterm/Makefile.in: + using autoconf 1.6 + +2003-08-09 dscho + + * README: added Projects section + +2003-08-08 dscho + + * .cvsignore, classes/.cvsignore, libvncclient/.cvsignore, + test/.cvsignore: more files to ignore + +2003-08-08 dscho + + * libvncclient/rfbproto.c, libvncclient/tight.c, + libvncclient/zlib.c, main.c, rfbserver.c: make --without-jpeg, + --without-zlib work + +2003-08-08 dscho + + * AUTHORS, configure, configure.ac: add --without-jpeg, + --without-zlib; repair --without-backchannel, --without-24bpp + +2003-08-08 dscho + + * httpd.c, sockets.c: handle EINTR after select() + +2003-08-06 dscho + + * ChangeLog, auth.c, contrib/x11vnc.c, examples/fontsel.c, + examples/mac.c, httpd.c, main.c, rfb/rfb.h, rfbregion.c, + rfbserver.c, rre.c, sockets.c, translate.c, vncterm/LinuxVNC.c, + vncterm/VNCommand.c, zlib.c: rfbErr introduced + +2003-08-03 dscho + + * rfb/rfbproto.h: forgot to change WORDS_BIGENDIAN to + LIBVNCSERVER_BIGENDIAN; #undef VERSION unneccessary... + +2003-08-02 dscho + + * config.h.in, configure, configure.ac: really check for setsid, not + pgrp + +2003-08-02 dscho + + * main.c: overlooked endian config.h constant + +2003-08-02 dscho + + * config.h.in: required file + +2003-08-01 dscho + + * README, configure, configure.ac: mention NEWS in README, add + checks for fork and setpgrp + +2003-07-31 dscho + + * ChangeLog: credit last two changes to Erik + +2003-07-31 dscho + + * main.c, rfb/rfb.h, sockets.c: rfbLog can be overridden; EINTR on + read/write means just try again + +2003-07-30 dscho + + * Makefile.am, Makefile.in, rfb/rfb.h, rfb/rfbclient.h: add + rfbclient.h to distribution; avoid C++ style comments + +2003-07-30 dscho + + * AUTHORS, ChangeLog, Makefile.in, NEWS, README, acinclude.m4, + aclocal.m4, auth.c, cargs.c, classes/Makefile.in, configure, + configure.ac, contrib/Makefile.in, contrib/x11vnc.c, + contrib/zippy.c, corre.c, cursor.c, cutpaste.c, draw.c, + examples/Makefile.in, examples/example.c, examples/mac.c, + examples/pnmshow.c, examples/pnmshow24.c, examples/vncev.c, font.c, + hextile.c, httpd.c, libvncclient/Makefile.in, libvncclient/corre.c, + libvncclient/cursor.c, libvncclient/hextile.c, + libvncclient/listen.c, libvncclient/rfbproto.c, libvncclient/rre.c, + libvncclient/sockets.c, libvncclient/tight.c, + libvncclient/vncviewer.c, libvncclient/zlib.c, main.c, rfb/rfb.h, + rfb/rfbclient.h, rfb/rfbconfig.h.in, rfb/rfbproto.h, + rfb/rfbregion.h, rfbregion.c, rfbserver.c, rre.c, selbox.c, + sockets.c, stats.c, test/Makefile.in, tight.c, translate.c, + vncauth.c, vncterm/LinuxVNC.c, vncterm/Makefile.in, + vncterm/VNCommand.c, vncterm/VNConsole.c, vncterm/VNConsole.h, + zlib.c, zrle.cxx: API change: Bool, KeySym, Pixel get prefix "rfb"; + constants in rfbconfig.h get prefix "LIBVNCSERVER_" + +2003-07-29 dscho + + * cursor.c, libvncclient/client_test.c, libvncclient/rfbproto.c, + libvncclient/vncviewer.c, main.c, rfb/rfb.h, rfb/rfbclient.h, + test/tight-1.c, tight.c: further valgrinding showed leaked mallocs + +2003-07-28 dscho + + * ChangeLog, README.cvs: adapted dox + +2003-07-28 dscho + + * libvncclient/Makefile: is autoconfed now + +2003-07-28 dscho + + * Makefile.am, Makefile.in, aclocal.m4, classes/Makefile.in, + configure, configure.ac, contrib/Makefile.in, contrib/x11vnc.c, + contrib/zippy.c, examples/1instance.c, examples/Makefile.in, + examples/fontsel.c, examples/mac.c, examples/pnmshow.c, + examples/pnmshow24.c, examples/vncev.c, libvncclient/Makefile, + libvncclient/Makefile.am, libvncclient/Makefile.in, + libvncclient/client_test.c, libvncclient/corre.c, + libvncclient/listen.c, libvncclient/rfbproto.c, libvncclient/rre.c, + libvncclient/sockets.c, libvncclient/tight.c, + libvncclient/vncviewer.c, libvncclient/zlib.c, main.c, + rdr/FdInStream.cxx, rdr/ZlibOutStream.cxx, rfb/rfb.h, + rfb/rfbclient.h, rfb/rfbconfig.h.in, rfbregion.c, rfbserver.c, + test/Makefile.am, test/Makefile.in, test/tight-1.c, tight.c, + vncterm/LinuxVNC.c, vncterm/Makefile.in, vncterm/VNCommand.c, + vncterm/VNConsole.c, vncterm/example.c: fixed maxRectsPerUpdate with + Tight encoding bug; some autoconfing; stderr should not be used in a + library (use rfbLog instead) + +2003-07-28 dscho + + * test/tight-1.c: first beginnings of automatic tests, thanks to + libvncclient + +2003-07-28 dscho + + * ChangeLog, TODO, main.c, rfb/rfb.h, rfb/rfbregion.h, rfbregion.c, + rfbserver.c, sockets.c, tight.c, vncauth.c: synced with TightVNC and + RealVNC + +2003-07-28 dscho + + * Makefile.am, Makefile.in, examples/Makefile.am, + examples/Makefile.in: debug flags + +2003-07-27 dscho + + * ChangeLog: libvncclient + +2003-07-27 dscho + + * libvncclient/Makefile, libvncclient/corre.c, + libvncclient/cursor.c, libvncclient/hextile.c, + libvncclient/listen.c, libvncclient/rfbproto.c, libvncclient/rre.c, + libvncclient/sockets.c, libvncclient/tight.c, + libvncclient/vncviewer.c, libvncclient/zlib.c, rfb/rfbclient.h, + vncauth.c: first alpha version of libvncclient + +2003-07-27 dscho + + * rfb/rfb.h, rfb/rfbproto.h, vncauth.c: make vncauth usable also for + upcoming libvncclient + +2003-07-25 dscho + + * ChangeLog, examples/.cvsignore, examples/Makefile.am, + examples/Makefile.in, examples/simple.c, examples/simple15.c, + index.html: Added simple examples + +2003-07-11 dscho + + * rfb/rfbconfig.h, rfb/rfbint.h: these files are generated by + configure + +2003-07-11 dscho + + * ChangeLog, httpd.c: long standing bug in http; was sending .jar + twice + +2003-07-10 dscho + + * INSTALL, Makefile.in, aclocal.m4, classes/Makefile.in, configure, + contrib/Makefile.in, depcomp, examples/Makefile.in, install-sh, + missing, mkinstalldirs, rfb/rfbconfig.h, rfb/rfbconfig.h.in, + rfb/rfbint.h, rfb/stamp-h.in, vncterm/Makefile.in: another try to + make CVS more helpful with configure + +2003-07-10 dscho + + * Makefile.am, classes/Makefile.am, configure.ac: also distribute + classes/ directory + +2003-07-10 dscho + + * cargs.c: fix compile + +2003-06-28 dscho + + * ChangeLog, cargs.c: http options inserted + +2003-05-05 dscho + + * configure.ac: fix am__fastdepCXX for system not having ZLIB + +2003-04-03 dscho + + * contrib/ChangeLog: added ChangeLog for x11vnc + +2003-04-03 dscho + + * contrib/x11vnc.c: new version from Karl! + +2003-02-28 dscho + + * Makefile.am, configure.ac, libvncserver-config.in: let + libvncserver-config behave as expected when called without + installing + +2003-02-27 dscho + + * README.cvs: added some documentation how to compile from CVS + sources + +2003-02-21 dscho + + * rfb/rfb.h: #include instead of #include + "rfbregion.h" + +2003-02-20 dscho + + * ChangeLog: update ChangeLog + +2003-02-20 dscho + + * index.html: #include instead of "rfb.h" + +2003-02-20 dscho + + * contrib/Makefile.am, contrib/x11vnc.c, contrib/zippy.c, + examples/Makefile.am, examples/colourmaptest.c, examples/example.c, + examples/fontsel.c, examples/mac.c, examples/pnmshow.c, + examples/pnmshow24.c, examples/storepasswd.c, examples/vncev.c, + libvncserver-config.in, vncterm/Makefile.am, vncterm/VNConsole.h: + the correct way to include rfb.h is now "#include " + +2003-02-19 dscho + + * index.html: webpage update + +2003-02-19 dscho + + * rfb/.cvsignore: forgotten .cvsignore + +2003-02-19 dscho + + * Makefile.am: fixed header installation into $(prefix)/include/rfb + +2003-02-18 dscho + + * Makefile.am, configure.ac, include/.cvsignore, + include/default8x16.h, include/keysym.h, include/rfb.h, + include/rfbproto.h, include/rfbregion.h, rfb/default8x16.h, + rfb/keysym.h, rfb/rfb.h, rfb/rfbproto.h, rfb/rfbregion.h: moved + include/ to rfb/ + +2003-02-18 dscho + + * sockets.c: fixed a bug when closing a client if no longer + listening for new clients. + +2003-02-17 dscho + + * cursor.c, include/rfb.h: export rfbReverseBytes; undefine VERSION, + because it's too common + +2003-02-17 dscho + + * INSTALL: INSTALL is copied by automake + +2003-02-17 dscho + + * INSTALL: INSTALL was missing + +2003-02-16 dscho + + * configure.ac, libvncserver-config.in: fixed --link option to + libvncserver-config + +2003-02-10 dscho + + * cvs_update_anonymously, include/rfbproto.h: cvs more flexible now; + ZRLE encoding only when HAVE_ZRLE defined + +2003-02-10 dscho + + * ChangeLog, rfbserver.c: really fixed ClientConnectionGone problem + +2003-02-10 dscho + + * vncterm/LinuxVNC.c, vncterm/VNConsole.c: fixed LinuxVNC colours + +2003-02-10 dscho + + * main.c, rfbserver.c: fixed a bug that prevented the first + connection to be closed + +2003-02-10 dscho + + * include/rfb.h: fixed pthread debugging (locks...) + +2003-02-10 dscho + + * contrib/Makefile.am, examples/Makefile.am, vncterm/Makefile.am: + fixed dependecy to libvncserver.a; if the lib is newer, the programs + are relinked + +2003-02-10 dscho + + * go: removed superfluous file + +2003-02-10 dscho + + * examples/.cvsignore, examples/Makefile.am, + examples/colourmaptest.c, vncterm/VNConsole.c: added + colourmapexample; fixed LinuxVNC to show the right colours + +2003-02-09 dscho + + * ChangeLog: vncterm imported, porting issues solved (IRIX, OS X, + Solaris) + +2003-02-09 dscho + + * configure.ac, examples/Makefile.am, examples/mac.c, + vncterm/Makefile.am, vncterm/VNCommand.c: support for OS X is better + now + +2003-02-09 dscho + + * configure.ac, examples/Makefile.am: trying again to support OS X + +2003-02-09 dscho + + * Makefile.am, configure.ac, examples/.cvsignore, + vncterm/.cvsignore, vncterm/ChangeLog, vncterm/LinuxVNC.c, + vncterm/Makefile.am, vncterm/README, vncterm/TODO, + vncterm/VNCommand.c, vncterm/VNConsole.c, vncterm/VNConsole.h, + vncterm/example.c, vncterm/vga.h: included vncterm + +2003-02-09 dscho + + * .cvsignore, configure.ac, examples/mac.c, mac.c: moved the + OSXvnc-server to examples; IRIX fixes (not really IRIX, but shows + there) + +2003-02-09 dscho + + * Makefile.am, examples/Makefile.am, examples/regiontest.c, + examples/sratest.c, include/rfbregion.h, main.c, rfbregion.c, + rfbserver.c, sraRegion.c, sraRegion.h, translate.c: renamed + sraRegion to rfbregion and put it in include/; will be installed now + +2003-02-09 dscho + + * ChangeLog: portability changes + +2003-02-09 dscho + + * configure.ac: order of X libraries is not good for IRIX + +2003-02-09 dscho + + * configure.ac, main.c: include order was wrong + +2003-02-09 dscho + + * Makefile.in, configure, contrib/Makefile.in, examples/Makefile.in: + source from CVS always will need a current autoconf/automake + +2003-02-09 dscho + + * Makefile.in, acinclude.m4, configure, contrib/Makefile.in, + examples/Makefile.in: I give up supporting old autoconf/automake; + now require at least 2.52 + +2003-02-09 dscho + + * acinclude.m4: more macros included for older autoconf/automake + +2003-02-09 dscho + + * Makefile.am, TODO, acinclude.m4, auth.c, configure.ac, + contrib/x11vnc.c, corre.c, cursor.c, cutpaste.c, hextile.c, + httpd.c, include/.cvsignore, include/rfb.h, include/rfbproto.h, + main.c, rfbserver.c, rre.c, sockets.c, sraRegion.c, stats.c, + tableinit24.c, tableinitcmtemplate.c, tableinittctemplate.c, + tabletrans24template.c, tabletranstemplate.c, tight.c, translate.c, + vncauth.c, zlib.c, zrle.cxx: converted CARD{8,16,32} to + uint{8,16,32}_t and included support for stdint.h + +2003-02-09 dscho + + * .cvsignore: ignore libvncserver-config + +2003-02-09 dscho + + * configure.ac, include/rfb.h, main.c: bigendian is now determined + at configure time + +2003-02-09 dscho + + * index.html: added website + +2003-02-09 dscho + + * Makefile.am, configure.ac: small adjustments for autoconf/automake + compatibility + +2003-02-09 dscho + + * Makefile.am, configure.ac, contrib/Makefile.am, + examples/Makefile.am, examples/vncev.c, libvncserver-config.in, + libvncserver.spec.in: make dist fixed; make rpm introduced + +2003-02-08 dscho + + * .cvsignore, Makefile, bootstrap.sh, contrib/.cvsignore, + contrib/Makefile, examples/.cvsignore, examples/Makefile: removed + Makefiles; these are generated now + +2003-02-08 dscho + + * .cvsignore, contrib/.cvsignore, examples/.cvsignore, + libvncserver.spec.in: ignore generated files + +2003-02-08 dscho + + * contrib/.cvsignore, examples/.cvsignore, examples/blooptest.c, + examples/sratest.c, include/.cvsignore: missing files + +2003-02-08 dscho + + * AUTHORS, CHANGES, ChangeLog, NEWS, TODO: further autoconf'ing + +2003-02-08 dscho + + * Makefile, Makefile.am, TODO, bootstrap.sh, configure.ac, + contrib/Makefile, contrib/Makefile.am, examples/Makefile, + examples/Makefile.am, examples/example.c, include/rfb.h, + include/rfbproto.h, main.c, rfbserver.c, sockets.c, tight.c, + zlib.c, zrle.cc, zrle.cxx: autoconf'ed everything + +2003-02-07 dscho + + * examples/.cvsignore, examples/radon.h: added files + +2003-02-07 dscho + + * cvs_update_anonymously, examples/Makefile: added Makefile in + examples; "export" in cvs_update_anonymously + +2003-02-07 dscho + + * 1instance.c, Makefile, contrib/Makefile, contrib/zippy.c, + default8x16.h, examples/1instance.c, examples/pnmshow24.c, + include/default8x16.h, include/keysym.h, include/rfb.h, + include/rfbproto.h, keysym.h, main.c, radon.h, rfb.h, rfbproto.h: + moved files to include; moved a file to examples/ + +2003-02-07 dscho + + * CHANGES, example.c, example.dsp, examples/example.c, + examples/example.dsp, examples/fontsel.c, examples/pnmshow.c, + examples/pnmshow24.c, examples/storepasswd.c, examples/vncev.c, + fontsel.c, pnmshow.c, pnmshow24.c, storepasswd.c, vncev.c: moved + files to contrib/ and examples/ + +2002-12-30 dscho + + * CHANGES, cargs.c: fixed cargs (segmentation fault!) + +2002-12-25 dscho + + * contrib/x11vnc.c: strange, but standard X11 behaviour from Sun + keymappings... + +2002-12-20 dscho + + * contrib/x11vnc.c: include commented debug functionality + +2002-12-20 dscho + + * contrib/x11vnc.c: AltGr fixes in x11vnc, renamed from altgr to + modtweak + +2002-12-20 dscho + + * Makefile: fixed compilation for zippy + +2002-12-20 dscho + + * contrib/Makefile: Makefile for contrib + +2002-12-19 dscho + + * contrib/x11vnc.c, contrib/zippy.c: new version of x11vnc from Karl + Runge + +2002-12-15 dscho + + * contrib/x11vnc.c: small fixes: in X11/Xlib.h Bool is int (Karl + Runge); indexed colour support + +2002-12-15 dscho + + * Makefile, rfbserver.c: fix: if no CXX is defined, really don't use + zrle (Karl Runge) + +2002-12-06 dscho + + * CHANGES, Makefile, contrib/x11vnc.c, contrib/zippy.c, httpd.c, + main.c, rfb.h, x11vnc.c, zippy.c: compiler warnings, contrib + directory, new x11vnc from Karl Runge + +2002-10-29 dscho + + * CHANGES, main.c, rfbserver.c: fixed severe bug with sending + fbupdates + +2002-10-29 dscho + + * CHANGES, README, cursor.c, main.c, rfb.h, rfbproto.h, + rfbserver.c, stats.c: patch from Const for CursorPosUpdate encoding + +2002-10-22 dscho + + * rdr/Exception.h, rdr/FdInStream.cxx, rdr/FdInStream.h, + rdr/FdOutStream.cxx, rdr/FdOutStream.h, rdr/FixedMemOutStream.h, + rdr/InStream.cxx, rdr/InStream.h, rdr/MemInStream.h, + rdr/MemOutStream.h, rdr/NullOutStream.cxx, rdr/NullOutStream.h, + rdr/OutStream.h, rdr/ZlibInStream.cxx, rdr/ZlibInStream.h, + rdr/ZlibOutStream.cxx, rdr/ZlibOutStream.h, rdr/types.h: rdr + +2002-10-22 dscho + + * Makefile, corre.c, cvs_update_anonymously, httpd.c, main.c, + rfb.h, rfbproto.h, rfbserver.c, stats.c, zrle.cc, zrleDecode.h, + zrleEncode.h: updated to vnc-3.3.4 (ZRLE encoding) + +2002-08-31 dscho + + * x11vnc.c: patch for IRIX + +2002-08-31 dscho + + * cvs_update_anonymously, httpd.c, rfbserver.c, vncauth.c: socket + via proxy gets options set, compiler warning fixes + +2002-08-31 dscho + + * Makefile, cvs_update_anonymously, httpd.c, mac.c, pnmshow24.c, + vncev.c, x11vnc.c, zippy.c: compiler warnings and format + vulnerabilities fixed + +2002-08-27 dscho + + * Makefile, httpd.c: IRIX changes + +2002-08-22 dscho + + * CHANGES: changes + +2002-08-22 dscho + + * classes/javaviewer.pseudo_proxy.patch, example.c, httpd.c, + main.c, rfb.h: a pseudo HTTP request for tunnelling (also via strict + Web Proxy) was added. + +2002-08-22 dscho + + * classes/index.vnc, httpd.c, vncauth.c: synchronized with tightVNC + 1.2.5 + +2002-08-19 dscho + + * Makefile, auth.c, cursor.c, example.c, httpd.c, main.c, + pnmshow.c, rfb.h, rfbserver.c, sraRegion.c, sraRegion.h, tight.c, + vncauth.c: unwarn compilation + +2002-07-28 dscho + + * CHANGES, README: prepare for version 0.4 + +2002-07-28 dscho + + * CHANGES, classes/index.vnc, example.c, httpd.c, main.c, rfb.h, + rfbproto.h, rfbserver.c, stats.c: NewFB encoding added + +2002-06-13 dscho + + * main.c, rfbserver.c, sockets.c: pthread fix + +2002-05-03 dscho + + * Makefile, rfb.h: solaris fixes (INADDR_NONE) + +2002-05-02 dscho + + * selbox.c: index was shadowed + +2002-05-02 dscho + + * cursor.c, font.c, httpd.c, main.c, rfb.h, rfbserver.c, sockets.c, + sraRegion.c, stats.c, tableinit24.c, tight.c, translate.c: Tim's + Changes + +2002-04-30 dscho + + * cargs.c, rfb.h: command line handling + +2002-04-30 dscho + + * Makefile, mac.c: more mac + +2002-04-30 dscho + + * mac.c: dimming for mac + +2002-04-30 dscho + + * mac.c: Mac compile fix + +2002-04-25 dscho + + * Makefile, x11vnc.c: x11vnc memleaks patched + +2002-04-25 dscho + + * CHANGES, cursor.c, example.c, main.c, rfbserver.c: memleaks + patched + +2002-04-25 dscho + + * mac.c: now colour handling should be correct + +2002-04-24 dscho + + * main.c: bug for 3 bpp planes (as Mac OSX) + +2002-04-23 dscho + + * CHANGES, classes/index.vnc, httpd.c, rfbserver.c, sockets.c: sync + with TightVNC 1.2.3 + +2002-04-23 dscho + + * Makefile, mac.c: OSXvnc-server compile fixes + +2002-04-23 dscho + + * CHANGES, Makefile, rfb.h: another solaris clean compile + +2002-04-23 dscho + + * x11vnc.c: KBDDEBUG + +2002-04-23 dscho + + * main.c, rfb.h: solaris endian changes + +2002-03-04 dscho + + * Makefile, rfbserver.c, sockets.c: reverted exception fds to NULL, + because of unexpected behaviour + +2002-02-19 dscho + + * CHANGES: changes + +2002-02-18 dscho + + * sockets.c: select exceptfds + +2002-02-18 dscho + + * README, cursor.c, example.c, httpd.c, main.c, rfb.h, rfbserver.c, + sockets.c, tight.c, translate.c: changes from Tim Jansen: threading + issues, new client can be rejected, and more + +2002-01-17 dscho + + * 1instance.c, Makefile: compile warning fix, dependency on + 1instance.c + +2002-01-17 dscho + + * mac.c: compile warning fix + +2002-01-17 dscho + + * font.c, rfb.h, rfbproto.h, rfbserver.c, vncauth.c: correct + BackChannel handling, compile cleanups + +2002-01-16 dscho + + * mac.c: compile fix + +2002-01-16 dscho + + * 1instance.c, Makefile, cargs.c, mac.c, rfb.h, rfbproto.h, + rfbserver.c, x11vnc.c: clean ups and encoding "backchannel" + +2002-01-14 dscho + + * mac.c: fixed compile on MAC + +2002-01-14 dscho + + * mac.c: toggle view only with OSX + +2002-01-14 dscho + + * 1instance.c, x11vnc.c: view mode now toggleable + +2001-12-21 dscho + + * mac.c, x11vnc.c: shared mode added + +2001-12-14 dscho + + * cargs.c, main.c: *argc=0 in cargs allowed, when copying area, + first undraw cursor ... + +2001-12-11 dscho + + * mac.c: fixed osx compiling + +2001-12-09 dscho + + * Makefile, mac.c: Makefile cleanup, some special options for OSX + +2001-12-09 dscho + + * x11vnc.c: tile modus now near perfect (shm's better though) + +2001-12-08 dscho + + * x11vnc.c: start to probe single pixels for updates + +2001-11-27 dscho + + * TODO, x11vnc.c: fixed dumb XTestFakeInput bug + +2001-11-27 dscho + + * TODO, x11vnc.c: removed XTestGrabControl. Doesn't really solve the + problem of a bad param. + +2001-11-27 dscho + + * TODO, x11vnc.c: few changes + +2001-11-27 dscho + + * Makefile, x11vnc.c: input works on other X11 servers than XFree86 + +2001-11-26 dscho + + * TODO, x11vnc.c: no crash when display was wrong + +2001-11-26 dscho + + * TODO: todo + +2001-11-25 dscho + + * x11vnc.c: init keyboard now takes correct display + +2001-11-23 dscho + + * x11vnc.c: keyboard handling now works. + +2001-11-22 dscho + + * x11vnc.c: added cmd line parameters + +2001-11-21 dscho + + * CHANGES: changes + +2001-11-20 dscho + + * x11vnc.c: shm works again + +2001-11-20 dscho + + * Makefile, x11vnc.c: missing include for XTest + +2001-11-19 dscho + + * x11vnc.c: x11vnc now works with colour maps + +2001-11-19 dscho + + * x11vnc.c: tmp + +2001-11-19 dscho + + * x11vnc.c: first support for colourmaps + +2001-11-19 dscho + + * Makefile, x11vnc.c: works, but loads high + +2001-11-19 dscho + + * cargs.c, main.c, rfb.h: cmdline arg -passwd added + +2001-11-19 dscho + + * Makefile, x11vnc.c: x11vnc now works view only and with SHM + +2001-11-18 dscho + + * Makefile, example.c, main.c, rfb.h, rfbserver.c, x11vnc.c: start + x11vnc, an x0rfbserver clone + +2001-11-15 dscho + + * example.dsp, libvncserver.dsp, libvncserver.dsw, main.c, rfb.h, + rfbserver.c, sockets.c: Visual C++ / win32 compatibility + reestablished + +2001-11-14 dscho + + * Makefile, TODO, font.c: docu, warning fixed + +2001-11-14 dscho + + * CHANGES: changes + +2001-11-14 dscho + + * cargs.c: separated argument handling from main.c + +2001-11-14 dscho + + * Makefile, d3des.h, example.c, fontsel.c, keysym.h, mac.c, main.c, + pnmshow.c, pnmshow24.c, rfb.h, rfbproto.h, sraRegion.h, vncev.c, + zippy.c: changes from Justin, zippy added + +2001-11-08 dscho + + * main.c: gettimeofday for windows + +2001-10-25 dscho + + * Makefile, main.c, rfbserver.c, sraRegion.c, sraRegion.h: clean ups + +2001-10-19 dscho + + * CHANGES: changes + +2001-10-18 dscho + + * Makefile, TODO, draw.c, main.c, rfb.h, vncev.c: add rfbDrawLine, + rfbDrawPixel and vncev, an xev "lookalike" + +2001-10-16 dscho + + * main.c: scheduleCopyRegion no longer sends frameBufferUpdates (no + longer clobbers deferring) + +2001-10-16 dscho + + * CHANGES, TODO, main.c, rfb.h, rfbserver.c: deferUpdate + +2001-10-16 dscho + + * TODO, font.c, rfbserver.c: font errors, requestedRegion bug + +2001-10-15 dscho + + * .gdb_history: unneccessary file + +2001-10-13 dscho + + * font.c: INT_MAX maybe not defined + +2001-10-13 dscho + + * TODO: todo + +2001-10-13 dscho + + * CHANGES, Makefile, README, TODO, auth.c, bdf2c.pl, + consolefont2c.pl, cursor.c, default8x16.h, draw.c, font.c, + fontsel.c, keysym.h, main.c, radon.h, rfb.h, selbox.c: rfbSelectBox, + consoleFonts, too many changes + +2001-10-12 dscho + + * Makefile: changes to Makefile + +2001-10-12 dscho + + * README, rfb.h, rfbserver.c: cleanups + +2001-10-11 dscho + + * auth.c, corre.c, httpd.c, main.c, rfb.h, rfbserver.c, rre.c, + sockets.c, sraRegion.c, tableinit24.c, tableinittctemplate.c, + tight.c, zlib.c: replaced xalloc with malloc functions, udp input + support (untested), fixed http + +2001-10-10 dscho + + * CHANGES, TODO, main.c, rfb.h, rfbserver.c: copyrect corrections, + fd_set in rfbNewClient, dox in rfb.h for pthreads problem + +2001-10-10 dscho + + * Makefile, cursor.c, main.c, rfb.h, rfbserver.c, sockets.c: + pthreads corrections + +2001-10-09 dscho + + * sockets.c: start udp + +2001-10-08 dscho + + * Makefile, region.h, rfbserver.c: removes region.h + +2001-10-07 dscho + + * Makefile, README, tabletrans24template.c: fixed 24bit (update was + garbled) + +2001-10-07 dscho + + * bdf2c.pl, font.c, main.c, rfb.h, rfbserver.c: font corrections, + displayHook + +2001-10-06 dscho + + * README, d3des.c, example.c, example.dsp, httpd.c, kbdptr.c, + libvncserver.dsp, libvncserver.dsw, main.c, rfb.h, rfbserver.c, + sockets.c, tableinitcmtemplate.c, tight.c, translate.c, vncauth.c: + WIN32 compatibility, removed kbdptr.c + +2001-10-05 dscho + + * CHANGES, TODO, cursor.c, example.c, main.c, rfb.h, rfbserver.c: + changed cursor functions to use screen info, not cursor fixed copy + rect. + +2001-10-05 dscho + + * Makefile, bdf2c.pl, example.c, font.c, radon.h, rfb.h: extracted + font routines from example + +2001-10-04 dscho + + * CHANGES, Makefile, TODO, main.c, rfb.h, rfbserver.c: + rfbDoCopyRect/Region and rfbScheduleCopyRect/Region. + +2001-10-04 dscho + + * rfb.h: tried to compile on Sparcs. Original cc has problems. ar + isn't there. + +2001-10-04 dscho + + * CHANGES, TODO, cursor.c, main.c, rfb.h, rfbserver.c: fixed 2 + pthreads issues, added noXCursor option. + +2001-10-03 dscho + + * TODO, main.c: working on IRIX pthreads problem + +2001-10-03 dscho + + * TODO, rfbserver.c: java viewer bug fixed + +2001-10-03 dscho + + * CHANGES, Makefile, TODO, main.c, rfb.h, rfbserver.c, sockets.c, + stats.c, tight.c: upgraded to TridiaVNC 1.2.1 + +2001-10-02 dscho + + * Makefile, TODO, cursor.c, d3des.c, main.c, rfb.h, rfbserver.c, + sockets.c, translate.c, vncauth.c: no more compile warnings, pthread + final(?) fixes + +2001-10-02 dscho + + * TODO: some todo items + +2001-10-02 dscho + + * CHANGES, cursor.c, rfb.h: implemented rfbSetCursor + +2001-10-02 dscho + + * rfb.h: prototype for rfbSendBell + +2001-10-02 dscho + + * CHANGES: changes + +2001-10-02 dscho + + * pnmshow24.c, tableinit24.c, tabletrans24template.c: forgot files + for 3 bpp + +2001-10-02 dscho + + * Makefile, README, TODO, example.c, main.c, rfb.h, rfbserver.c, + sockets.c, tableinitcmtemplate.c, translate.c: support for server + side colour maps, fix for non-pthread, support for 3bpp + +2001-10-01 dscho + + * TODO: have to upgrade to newest VNC sources + +2001-09-29 dscho + + * Makefile, README, TODO, example.c, main.c, rfb.h, rfbserver.c, + sockets.c: finally fixed pthreads + +2001-09-29 dscho + + * TODO, cursor.c: nother try + +2001-09-29 dscho + + * Makefile, cursor.c, main.c, rfb.h, rfbserver.c, sockets.c: more + pthread debugging + +2001-09-29 dscho + + * Makefile, main.c, rfb.h: cleaned up pthreads (now compiles) and + rfb.h (first undefine TRUE) + +2001-09-29 dscho + + * Makefile, README, TODO, include/X11/X.h, include/X11/Xalloca.h, + include/X11/Xfuncproto.h, include/X11/Xfuncs.h, include/X11/Xmd.h, + include/X11/Xos.h, include/X11/Xosdefs.h, include/X11/Xproto.h, + include/X11/Xprotostr.h, include/X11/keysym.h, + include/X11/keysymdef.h, include/Xserver/colormap.h, + include/Xserver/cursor.h, include/Xserver/dix.h, + include/Xserver/gc.h, include/Xserver/input.h, + include/Xserver/misc.h, include/Xserver/miscstruct.h, + include/Xserver/opaque.h, include/Xserver/os.h, + include/Xserver/pixmap.h, include/Xserver/region.h, + include/Xserver/regionstr.h, include/Xserver/screenint.h, + include/Xserver/scrnintstr.h, include/Xserver/validate.h, + include/Xserver/window.h, main.c, miregion.c, region.h, rfb.h, + rfbserver.c, sraRegion.c, sraRegion.h, translate.c, xalloc.c: + dropped miregion and all the X stuff in favour of Wez' sraRegion, + added dox + +2001-09-28 dscho + + * cursor.c, rfb.h: exported rfbReverseByte + +2001-09-28 dscho + + * cursor.c: don't send a cursor update if there is no cursor + +2001-09-28 dscho + + * README, TODO: small changes to README (contact) and TODO + (autoconf?) + +2001-09-28 dscho + + * Makefile: libvncserver.a is not deleted by make clean + +2001-09-28 dscho + + * example.c: unnecessary include + +2001-09-28 dscho + + * Makefile, example.c, rfb.h: now compiles on FreeBSD + +2001-09-28 dscho + + * Makefile: make clean now cleans mac.o pnmshow.o and example.o + +2001-09-27 dscho + + * README, cursor.c, main.c, rfb.h, rfbserver.c: added + setTranslateFunction as member of rfbScreenInfo, cursor may be NULL + (no cursor). + +2001-09-27 dscho + + * Makefile, mac.c, rfb.h: try to make OSXvnc run again. + +2001-09-27 dscho + + * README, TODO, example.c, main.c, rfb.h: docu and cursors in + examples. + +2001-09-26 dscho + + * Makefile, README, TODO, example.c, httpd.c, main.c, pnmshow.c, + rfb.h: API corrections + +2001-09-26 dscho + + * TODO, main.c, pnmshow.c: adapted pnmshow to aligned width + +2001-09-25 dscho + + * example.c, tabletranstemplate.c: look for align bug with odd + width. Bug in vncviewer? + +2001-09-25 dscho + + * d3des.c, d3des.h, libvncauth/Imakefile, libvncauth/Makefile, + libvncauth/d3des.c, libvncauth/d3des.h, libvncauth/vncauth.c, + libvncauth/vncauth.h, vncauth.c: permanently moved authorization + +2001-09-25 dscho + + * Makefile, rfb.h, storepasswd.c: moved vncauth to libvncserver + +2001-09-25 dscho + + * .depend: rmoved unneccessary files + +2001-09-25 dscho + + * Makefile, TODO, cursor.c, example.c, keysym.h, main.c, pnmshow.c, + region.h, rfb.h, rfbserver.c: fix cursor bug; missing keysym; fix + align problem on SGI; clean up cursor.c clean up rfb.h a bit; endian + issues + +2001-09-24 dscho + + * region.h: forgot file + +2001-09-24 dscho + + * Makefile, TODO, cursor.c, example.c, include/Xserver/os.h, + main.c, miregion.c, pnmshow.c, rfb.h, rfbserver.c, sockets.c, + xalloc.c: bugfix: cursor (works now without xcursor encoding) + +2001-09-24 dscho + + * cursor.c, example.c, main.c, rfb.h, rfbserver.c: cursor changes + +2001-09-23 dscho + + * Makefile, README, TODO, cursor.c, example.c, httpd.c, main.c, + rfb.h, rfbserver.c, sockets.c, zlib.c: cleaned up warnings, cursor + changes + +2001-09-21 dscho + + * Makefile, classes/index.vnc, cursor.c, example.c, httpd.c, + main.c, rfb.h: http added, prepare for cursor + +2001-09-20 dscho + + * README: changed README at last + +2001-09-13 dscho + + * Makefile, bdf2c.pl, example.c, radon.h: Now you can write + something in addition to mouse movements ... + +2001-08-14 dscho + + * Makefile, example.c, main.c, pnmshow.c: comments & new example: + pnmshow + +2001-08-14 dscho + + * example.c, main.c, rfb.h: now lines are drawn for the example, + first steps to make clients independent. + +2001-08-14 dscho + + * Makefile, example.c, main.c, rfb.h, rfbserver.c: hooks inserted + +2001-08-01 dscho + + * Initial revision + diff --git a/jni/vnc/LibVNCServer-0.9.9/INSTALL b/jni/vnc/LibVNCServer-0.9.9/INSTALL new file mode 100644 index 0000000..b42a17a --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/INSTALL @@ -0,0 +1,182 @@ +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, a file +`config.cache' that saves the results of its tests to speed up +reconfiguring, and a file `config.log' containing compiler output +(useful mainly for debugging `configure'). + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If at some point `config.cache' +contains results you don't want to keep, you may remove or edit it. + + The file `configure.in' is used to create `configure' by a program +called `autoconf'. You only need `configure.in' if you want to change +it or regenerate `configure' using a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. You can give `configure' +initial values for variables by setting them in the environment. Using +a Bourne-compatible shell, you can do that on the command line like +this: + CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure + +Or on systems that have the `env' program, you can do it like this: + env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not supports the `VPATH' +variable, you have to compile the package for one architecture at a time +in the source code directory. After you have installed the package for +one architecture, use `make distclean' before reconfiguring for another +architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=PATH' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' can not figure out +automatically, but needs to determine by the type of host the package +will run on. Usually `configure' can figure that out, but if it prints +a message saying it can not guess the host type, give it the +`--host=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name with three fields: + CPU-COMPANY-SYSTEM + +See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the host type. + + If you are building compiler tools for cross-compiling, you can also +use the `--target=TYPE' option to select the type of system they will +produce code for and the `--build=TYPE' option to select the type of +system on which you are compiling the package. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Operation Controls +================== + + `configure' recognizes the following options to control how it +operates. + +`--cache-file=FILE' + Use and save the results of the tests in FILE instead of + `./config.cache'. Set FILE to `/dev/null' to disable caching, for + debugging `configure'. + +`--help' + Print a summary of the options to `configure', and exit. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--version' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`configure' also accepts some other, not widely useful, options. diff --git a/jni/vnc/LibVNCServer-0.9.9/LibVNCServer.spec.in b/jni/vnc/LibVNCServer-0.9.9/LibVNCServer.spec.in new file mode 100755 index 0000000..13fe351 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/LibVNCServer.spec.in @@ -0,0 +1,97 @@ +# Note that this is NOT a relocatable package +Name: @PACKAGE@ +Version: @VERSION@ +Release: 2 +Summary: a library to make writing a vnc server easy +Copyright: GPL +Group: Libraries/Network +Packager: Johannes.Schindelin +Source: %{name}-%{version}.tar.gz +BuildRoot: %{_tmppath}/%{name}-%{version}-buildroot + +%description +LibVNCServer makes writing a VNC server (or more correctly, a program +exporting a framebuffer via the Remote Frame Buffer protocol) easy. + +It is based on OSXvnc, which in turn is based on the original Xvnc by +ORL, later AT&T research labs in UK. + +It hides the programmer from the tedious task of managing clients and +compression schemata. + +LibVNCServer was put together and is (actively ;-) maintained by +Johannes Schindelin + +%package devel +Requires: %{name} = %{version} +Summary: Static Libraries and Header Files for LibVNCServer +Group: Libraries/Network +Requires: %{name} = %{version} + +%description devel +Static Libraries and Header Files for LibVNCServer. + +%package x11vnc +Requires: %{name} = %{version} +Summary: VNC server for the current X11 session +Group: User Interface/X +Requires: %{name} = %{version} + +%description x11vnc +x11vnc is to X Window System what WinVNC is to Windows, i.e. a server +which serves the current X Window System desktop via RFB (VNC) +protocol to the user. + +Based on the ideas of x0rfbserver and on LibVNCServer, it has evolved +into a versatile and performant while still easy to use program. + +%prep +%setup -n %{name}-%{version} + +%build +# CFLAGS="$RPM_OPT_FLAGS" ./configure --prefix=%{_prefix} +%configure +make + +%install +[ -n "%{buildroot}" -a "%{buildroot}" != / ] && rm -rf %{buildroot} +# make install prefix=%{buildroot}%{_prefix} +%makeinstall includedir="%{buildroot}%{_includedir}/rfb" + +%{__install} -d -m0755 %{buildroot}%{_datadir}/x11vnc/classes +%{__install} webclients/VncViewer.jar webclients/index.vnc \ + %{buildroot}%{_datadir}/x11vnc/classes + +%clean +[ -n "%{buildroot}" -a "%{buildroot}" != / ] && rm -rf %{buildroot} + +%pre +%post +%preun +%postun + +%files +%defattr(-,root,root) +%doc README INSTALL AUTHORS ChangeLog NEWS TODO +%{_bindir}/LinuxVNC +%{_bindir}/libvncserver-config +%{_libdir}/libvncclient.* +%{_libdir}/libvncserver.* + +%files devel +%defattr(-,root,root) +%{_includedir}/rfb/* + +%files x11vnc +%defattr(-,root,root) +%{_bindir}/x11vnc +%{_mandir}/man1/x11vnc.1* +%{_datadir}/x11vnc/classes + +%changelog +* Fri Aug 19 2005 Alberto Lusiani release 2 +- create separate package for x11vnc to prevent conflicts with x11vnc rpm +- create devel package, needed to compile but not needed for running +* Sun Feb 9 2003 Johannes Schindelin +- created libvncserver.spec.in + diff --git a/jni/vnc/LibVNCServer-0.9.9/Makefile.am b/jni/vnc/LibVNCServer-0.9.9/Makefile.am new file mode 100644 index 0000000..e244fe8 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/Makefile.am @@ -0,0 +1,31 @@ +if WITH_X11VNC +X11VNC=x11vnc +endif + +SUBDIRS=libvncserver examples libvncclient vncterm webclients client_examples test $(X11VNC) +DIST_SUBDIRS=libvncserver examples libvncclient vncterm webclients client_examples test +EXTRA_DIST = CMakeLists.txt rfb/rfbint.h.cmake rfb/rfbconfig.h.cmake + +bin_SCRIPTS = libvncserver-config + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = libvncserver.pc libvncclient.pc + +includedir=$(prefix)/include/rfb +#include_HEADERS=rfb.h rfbconfig.h rfbint.h rfbproto.h keysym.h rfbregion.h + +include_HEADERS=rfb/rfb.h rfb/rfbconfig.h rfb/rfbint.h rfb/rfbproto.h \ + rfb/keysym.h rfb/rfbregion.h rfb/rfbclient.h + +$(PACKAGE)-$(VERSION).tar.gz: dist + +if HAVE_RPM +# Rule to build RPM distribution package +rpm: $(PACKAGE)-$(VERSION).tar.gz $(PACKAGE).spec + cp $(PACKAGE)-$(VERSION).tar.gz @RPMSOURCEDIR@ + rpmbuild -ba $(PACKAGE).spec +endif + +t: + $(MAKE) -C test test + diff --git a/jni/vnc/LibVNCServer-0.9.9/Makefile.in b/jni/vnc/LibVNCServer-0.9.9/Makefile.in new file mode 100644 index 0000000..3991c08 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/Makefile.in @@ -0,0 +1,888 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = . +DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \ + $(srcdir)/LibVNCServer.spec.in $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/libvncclient.pc.in \ + $(srcdir)/libvncserver-config.in $(srcdir)/libvncserver.pc.in \ + $(srcdir)/rfbconfig.h.in $(top_srcdir)/configure AUTHORS \ + COPYING ChangeLog INSTALL NEWS TODO compile config.guess \ + config.sub depcomp install-sh ltmain.sh missing +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = rfbconfig.h +CONFIG_CLEAN_FILES = libvncserver.pc libvncclient.pc \ + libvncserver-config LibVNCServer.spec +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)" \ + "$(DESTDIR)$(includedir)" +SCRIPTS = $(bin_SCRIPTS) +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +DATA = $(pkgconfig_DATA) +HEADERS = $(include_HEADERS) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir dist dist-all distcheck +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d "$(distdir)" \ + || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr "$(distdir)"; }; } +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AVAHI_CFLAGS = @AVAHI_CFLAGS@ +AVAHI_LIBS = @AVAHI_LIBS@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CRYPT_LIBS = @CRYPT_LIBS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LDFLAGS = @JPEG_LDFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +RPMSOURCEDIR = @RPMSOURCEDIR@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSL_LIBS = @SSL_LIBS@ +STRIP = @STRIP@ +SYSTEM_LIBVNCSERVER_CFLAGS = @SYSTEM_LIBVNCSERVER_CFLAGS@ +SYSTEM_LIBVNCSERVER_LIBS = @SYSTEM_LIBVNCSERVER_LIBS@ +VERSION = @VERSION@ +WSOCKLIB = @WSOCKLIB@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = $(prefix)/include/rfb +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_ffmpeg = @with_ffmpeg@ +@WITH_X11VNC_TRUE@X11VNC = x11vnc +SUBDIRS = libvncserver examples libvncclient vncterm webclients client_examples test $(X11VNC) +DIST_SUBDIRS = libvncserver examples libvncclient vncterm webclients client_examples test +EXTRA_DIST = CMakeLists.txt rfb/rfbint.h.cmake rfb/rfbconfig.h.cmake +bin_SCRIPTS = libvncserver-config +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = libvncserver.pc libvncclient.pc +#include_HEADERS=rfb.h rfbconfig.h rfbint.h rfbproto.h keysym.h rfbregion.h +include_HEADERS = rfb/rfb.h rfb/rfbconfig.h rfb/rfbint.h rfb/rfbproto.h \ + rfb/keysym.h rfb/rfbregion.h rfb/rfbclient.h + +all: rfbconfig.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +rfbconfig.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/rfbconfig.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status rfbconfig.h +$(srcdir)/rfbconfig.h.in: $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f rfbconfig.h stamp-h1 +libvncserver.pc: $(top_builddir)/config.status $(srcdir)/libvncserver.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +libvncclient.pc: $(top_builddir)/config.status $(srcdir)/libvncclient.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +libvncserver-config: $(top_builddir)/config.status $(srcdir)/libvncserver-config.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +LibVNCServer.spec: $(top_builddir)/config.status $(srcdir)/LibVNCServer.spec.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +install-binSCRIPTS: $(bin_SCRIPTS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt +install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + done + +uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files +install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) + test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ + done + +uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(includedir)" && rm -f $$files + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) rfbconfig.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) rfbconfig.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) rfbconfig.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) rfbconfig.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @$(am__cd) '$(distuninstallcheck_dir)' \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile $(SCRIPTS) $(DATA) $(HEADERS) rfbconfig.h +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: install-includeHEADERS install-pkgconfigDATA + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: install-binSCRIPTS + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-binSCRIPTS uninstall-includeHEADERS \ + uninstall-pkgconfigDATA + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ + ctags-recursive install-am install-strip tags-recursive + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ + dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ + distcheck distclean distclean-generic distclean-hdr \ + distclean-libtool distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-binSCRIPTS install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am \ + install-includeHEADERS install-info install-info-am \ + install-man install-pdf install-pdf-am install-pkgconfigDATA \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am uninstall-binSCRIPTS \ + uninstall-includeHEADERS uninstall-pkgconfigDATA + + +$(PACKAGE)-$(VERSION).tar.gz: dist + +# Rule to build RPM distribution package +@HAVE_RPM_TRUE@rpm: $(PACKAGE)-$(VERSION).tar.gz $(PACKAGE).spec +@HAVE_RPM_TRUE@ cp $(PACKAGE)-$(VERSION).tar.gz @RPMSOURCEDIR@ +@HAVE_RPM_TRUE@ rpmbuild -ba $(PACKAGE).spec + +t: + $(MAKE) -C test test + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jni/vnc/LibVNCServer-0.9.9/NEWS b/jni/vnc/LibVNCServer-0.9.9/NEWS new file mode 100644 index 0000000..a5d0a89 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/NEWS @@ -0,0 +1,237 @@ +0.9.9 + - Overall changes: + * Added noVNC HTML5 VNC viewer (http://kanaka.github.com/noVNC/) connect possibility + to our http server. Pure JavaScript, no Java plugin required anymore! (But a + recent browser...) + * Added a GTK+ VNC viewer example. + + - LibVNCServer/LibVNCClient: + * Added support to build for Google Android. + * Complete IPv6 support in both LibVNCServer and LibVNCClient. + + - LibVNCServer: + * Split two event-loop related functions out of the rfbProcessEvents() mechanism. + This is required to be able to do proper event loop integration with Qt. Idea was + taken from Vino's libvncserver fork. + * Added TightPNG (http://wiki.qemu.org/VNC_Tight_PNG) encoding support. Like the + original Tight encoding, this still uses JPEG, but ZLIB encoded rects are encoded + with PNG here. + * Added suport for serving VNC sessions through WebSockets + (http://en.wikipedia.org/wiki/WebSocket), a web technology providing for multiplexing + bi-directional, full-duplex communications channels over a single TCP connection. + * Support connections from the Mac OS X built-in VNC client to LibVNCServer + instances running with no password. + * Replaced the Tight encoder with a TurboVNC one which is tremendously faster in most + cases, especially with high-color video or 3D workloads. + (http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf) + + - LibVNCClient: + * Added support to only listen for reverse connections on a specific IP address. + * Support for using OpenSSL instead of GnuTLS. This could come in handy on embedded + devices where only this TLS implementation is available. + * Added support to connect to UltraVNC Single Click servers. + +0.9.8.2 + - Fixed a regression that crept in with the Apple Remote Desktop support. + +0.9.8.1 + - Fixed an ABI compatibility issue. + +0.9.8 + - Overall changes: + * Automagically generated API documentation using doxygen. + * Added support for pkg-config. + * Fixed Mingw32 cross compilation. + * Fixed CMake build system. + + - LibVNCServer/LibVNCClient: + * All files used by _both_ LibVNCServer and LibVNCClient were put into + a 'common' directory, reducing code duplication. + * Implemented xvp VNC extension. + * Updated minilzo library used for Ultra encoding to ver 2.04. + According to the minilzo README, this brings a significant + speedup on 64-bit architechtures. + + - LibVNCServer: + * Thread safety for ZRLE, Zlib, Tight, RRE, CoRRE and Ultra encodings. + This makes all VNC encodings safe to use with a multithreaded server. + * A DisplayFinishedHook for LibVNCServer. If set, this hook gets called + just before rfbSendFrameBufferUpdate() returns. + * Fix for tight security type for RFB 3.8 in TightVNC file transfer + (Debian Bug #517422). + + - LibVNCClient: + * Unix sockets support. + * Anonymous TLS security type support. + * VeNCrypt security type support. + * MSLogon security type support. + * ARD (Apple Remote Desktop) security type support. + * UltraVNC Repeater support. + * A new FinishedFrameBufferUpdate callback that is invoked after each + complete framebuffer update. + * A new non-forking listen (reverse VNC) function that works under + Windows. + * IPv6 support. LibVNCClient is now able to connect to IPv6 VNC servers. + * IP QoS support. This enables setting the DSCP/Traffic Class field of + IP/IPv6 packets sent by a client. For example starting a client with + -qosdscp 184 marks all outgoing traffic for expedited forwarding. + Implementation for Win32 is still a TODO, though. + * Fixed hostname resolution problems under Windows. + + - SDLvncviewer + * Is now resizable and can do key repeat, mouse wheel scrolling + and clipboard copy and paste. + + - LinuxVNC: + * Fix for no input possible because of ctrl key being stuck. + Issue was reported as Debian bug #555988. + + +0.9.7 + Mark sent me patches to no longer need C++ for ZRLE encoding! + added --disable-cxx Option for configure + x11vnc changes from Karl Runge: + - Changed all those whimpy printf(...)'s into manly fprintf(stdxxx,...)'s. + + - Added -q switch (quiet) to suppress printing all the debug-looking output. + + - Added -bg switch to fork into background after everything is set up. + (checks for LIBVNCSERVER_HAVE_FORK and LIBVNCSERVER_HAVE_SETSID) + + - Print this string out to stdout: 'PORT=XXXX' (usually XXXX = 5900). + Combining with -bg, easy to write a ssh/rsh wrapper with something like: + port=`ssh $host "x11vnc -bg .."` then run vncviewer based on $port output. + (tunneling the vnc traffic thru ssh a bit more messy, but doable) + + - Quite a bit of code to be more careful when doing 8bpp indexed color, e.g. + not assuming NCOLORS is 256, handling 8bit TrueColor and Direct Color, etc + (I did all this probably in April, not quite clear in my mind now, but + I did test it out a fair amount on my old Sparcstation 20 wrt a user's + questions). + introduce rfbErr for Errors (Erik) + make rfbLog overridable (suggested by Erik) + don't reutrn on EINTR in WriteExact()/ReadExact() (suggested by Erik) + use AX_PREFIX_CONFIG_H to prefix constants in config.h to avoid + name clashes (also suggested by Erik) + transformed Bool, KeySym, Pixel to rfbBool, rfbKeySym, rfbPixel + (as suggested by Erik) + purged exit() calls (suggested by Erik) + fixed bug with maxRectsPerUpdate and Tight Encoding (these are incompatible) + checked sync with TightVNC 1.2.8: + viewonly/full passwords; if given a list, only the first is a full one + vncRandomBytes is a little more secure now + new weights for tight encoding + checked sync with RealVNC 3.3.7 + introduced maxRectsPerUpdate + added first alpha version of LibVNCClient + added simple and simple15 example (really simple examples) + finally got around to fix configure in CVS + long standing http bug (.jar was sent twice) fixed by a friend of Karl named Mike + http options in cargs + when closing a client and no longer listening for new ones, don't crash + fixed a bug with ClientConnectionGone + endianness is checked at configure time + fixed a bug that prevented the first client from being closed + fixed that annoying "libvncserver-config --link" bug + make rfbReverseByte public (for rdp2vnc) + fixed compilation on OS X, IRIX, Solaris + install target for headers is now ${prefix}/include/rfb ("#include ") + renamed "sraRegion.h" to "rfbregion.h" + CARD{8,16,32} are more standard uint{8,16,32}_t now + fixed LinuxVNC colour handling + fixed a bug with pthreads where the connection was not closed + moved vncterm to main package (LinuxVNC included) + portability fixes (IRIX, OSX, Solaris) + more portable way to determine endianness and types of a given size + through autoconf based methods +0.5 + rpm packaging through autoconf + autoconf'ed the whole package (including optional support for zlib, + pthreads and libjpeg as well as zrle/c++) + moved appropriate files to contrib/ and examples/ respectively + fixed long standing cargs bug (Justin "Zippy" Dearing) + Even better x11vnc from Karl J. Runge! (supports different kbd layouts of + client/server) + Better x11vnc from Karl J. Runge! + fixed severe bug (Const Kaplinsky) + got patch from Const Kaplisnky with CursorPosUpdate encoding and some Docs + sync'ed with newest RealVNC (ZRLE encoding) + a HTTP request for tunnelling was added (to fool strict web proxies) + sync'ed with TightVNC 1.2.5 +0.4 + support for NewFB from Const Kaplinsky + memory leaks squashed (localtime pseudo leak is still there :-) + small improvements for OSXvnc (still not working correctly) + synced with TightVNC 1.2.3 + solaris compile cleanups + many x11vnc improvements + added backchannel, an encoding which needs special clients to pass + arbitrary data to the client + changes from Tim Jansen regarding multi threading and client blocking + as well as C++ compliancy + x11vnc can be controlled by starting again with special options if compiling + with LOCAL_CONTROL defined +0.3 + added x11vnc, a x0rfbserver clone + regard deferUpdateTime in processEvents, if usec<0 + initialize deferUpdateTime (memory "leak"!) + changed command line handling (arguments are parsed and then removed) + added very simple example: zippy + added rfbDrawLine, rfbDrawPixel +0.2 + inserted a deferUpdate mechanism (X11 independent). + removed deletion of requestedRegion + added rfbLoadConsoleFont + fixed font colour handling. + added rfbSelectBox + added rfbDrawCharWithClip to allow for clipping and a background colour. + fixed font colours + added rfbFillRect + added IO function to check password. + rfbNewClient now sets the socket in the fd_set (for the select() call) + when compiling the library with HAVE_PTHREADS and an application + which includes "rfb.h" without, the structures got mixed up. + So, the pthreads section is now always at the end, and also + you get a linker error for rfbInitServer when using two different + pthread setups. + fixed two deadlocks: when setting a cursor and when using CopyRect + fixed CopyRect when copying modified regions (they lost the modified + property) + WIN32 target compiles and works for example :-) + fixed CopyRect (was using the wrong order of rectangles...) + should also work with pthreads, because copyrects are + always sent immediately (so that two consecutive copy rects + cannot conflict). + changed rfbUndrawCursor(rfbClientPtr) to (rfbScreenInfoPtr), because + this makes more sense! + flag backgroundLoop in rfbScreenInfo (if having pthreads) + CopyRect & CopyRegion were implemented. + if you use a rfbDoCopyR* function, it copies the data in the + framebuffer. If you prefer to do that yourself, use rfbScheduleCopyR* + instead; this doesn't modify the frameBuffer. + added flag to optionally not send XCursor updates, but only RichCursor, + or if that is not possible, fall back to server side cursor. + This is useful if your cursor has many nice colours. + fixed java viewer on server side: + SendCursorUpdate would send data even before the client pixel format + was set, but the java applet doesn't like the server's format. + fixed two pthread issues: + rfbSendFramebuffer was sent by a ProcessClientMessage function + (unprotected by updateMutex). + cursor coordinates were set without protection by cursorMutex + source is now equivalent to TridiaVNC 1.2.1 + pthreads now work (use iterators!) + cursors are supported (rfbSetCursor automatically undraws cursor) + support for 3 bytes/pixel (slow!) + server side colourmap support + fixed rfbCloseClient not to close the connection (pthreads!) + this is done lazily (and with proper signalling). + cleaned up mac.c (from original OSXvnc); now compiles (untested!) + compiles cleanly on Linux, IRIX, BSD, Apple (Darwin) + fixed prototypes +0.1 + rewrote API to use pseudo-methods instead of required functions. + lots of clean up. + Example can show symbols now. + All encodings + HTTP diff --git a/jni/vnc/LibVNCServer-0.9.9/README b/jni/vnc/LibVNCServer-0.9.9/README new file mode 100644 index 0000000..499b72b --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/README @@ -0,0 +1,439 @@ +LibVNCServer: A library for easy implementation of a VNC server. +Copyright (C) 2001-2003 Johannes E. Schindelin + +If you already used LibVNCServer, you probably want to read NEWS. + +What is it? +----------- + +VNC is a set of programs using the RFB (Remote Frame Buffer) protocol. They +are designed to "export" a frame buffer via net (if you don't know VNC, I +suggest you read "Basics" below). It is already in wide use for +administration, but it is not that easy to program a server yourself. + +This has been changed by LibVNCServer. + +There are two examples included: + - example, a shared scribble sheet + - pnmshow, a program to show PNMs (pictures) over the net. + +The examples are not too well documented, but easy straight forward and a +good starting point. + +Try example: it outputs on which port it listens (default: 5900), so it is +display 0. To view, call + vncviewer :0 +You should see a sheet with a gradient and "Hello World!" written on it. Try +to paint something. Note that everytime you click, there is some bigger blot, +whereas when you drag the mouse while clicked you draw a line. The size of the +blot depends on the mouse button you click. Open a second vncviewer with +the same parameters and watch it as you paint in the other window. This also +works over internet. You just have to know either the name or the IP of your +machine. Then it is + vncviewer machine.where.example.runs.com:0 +or similar for the remote client. Now you are ready to type something. Be sure +that your mouse sits still, because everytime the mouse moves, the cursor is +reset to the position of the pointer! If you are done with that demo, press +the down or up arrows. If your viewer supports it, then the dimensions of the +sheet change. Just press Escape in the viewer. Note that the server still +runs, even if you closed both windows. When you reconnect now, everything you +painted and wrote is still there. You can press "Page Up" for a blank page. + +The demo pnmshow is much simpler: you either provide a filename as argument +or pipe a file through stdin. Note that the file has to be a raw pnm/ppm file, +i.e. a truecolour graphics. Only the Escape key is implemented. This may be +the best starting point if you want to learn how to use LibVNCServer. You +are confronted with the fact that the bytes per pixel can only be 8, 16 or 32. + +Projects using it +---------------------------------------- + +VNC for KDE +http://www.tjansen.de/krfb + +GemsVNC +http://www.elilabs.com/~rj/gemsvnc/ + +VNC for Netware +http://forge.novell.com/modules/xfmod/project/?vncnw + +RDesktop +http://rdesktop.sourceforge.net + +Mail me, if your application is missing! + +How to use +---------- + +To make a server, you just have to initialise a server structure using the +function rfbDefaultScreenInit, like + rfbScreenInfoPtr rfbScreen = + rfbGetScreen(argc,argv,width,height,8,3,bpp); +where byte per pixel should be 1, 2 or 4. If performance doesn't matter, +you may try bpp=3 (internally one cannot use native data types in this +case; if you want to use this, look at pnmshow24). + + +You then can set hooks and io functions (see below) or other +options (see below). + +And you allocate the frame buffer like this: + rfbScreen->frameBuffer = (char*)malloc(width*height*bpp); + +After that, you initialize the server, like + rfbInitServer(rfbScreen); + +You can use a blocking event loop, a background (pthread based) event loop, +or implement your own using the rfbProcessEvents function. + +Making it interactive +--------------------- + +Input is handled by IO functions (see below). + +Whenever you change something in the frame buffer, call rfbMarkRectAsModified. +You should make sure that the cursor is not drawn before drawing yourself +by calling rfbUndrawCursor. You can also draw the cursor using rfbDrawCursor, +but it hardly seems necessary. For cursor details, see below. + +Utility functions +----------------- + +Whenever you draw something, you have to call + rfbMarkRectAsModified(screen,x1,y1,x2,y2). +This tells LibVNCServer to send updates to all connected clients. + +Before you draw something, be sure to call + rfbUndrawCursor(screen). +This tells LibVNCServer to hide the cursor. +Remark: There are vncviewers out there, which know a cursor encoding, so +that network traffic is low, and also the cursor doesn't need to be +drawn the cursor everytime an update is sent. LibVNCServer handles +all the details. Just set the cursor and don't bother any more. + +To set the mouse coordinates (or emulate mouse clicks), call + defaultPtrAddEvent(buttonMask,x,y,cl); +IMPORTANT: do this at the end of your function, because this actually draws +the cursor if no cursor encoding is active. + +What is the difference between rfbScreenInfoPtr and rfbClientPtr? +----------------------------------------------------------------- + +The rfbScreenInfoPtr is a pointer to a rfbScreenInfo structure, which +holds information about the server, like pixel format, io functions, +frame buffer etc. + +The rfbClientPtr is a pointer to an rfbClientRec structure, which holds +information about a client, like pixel format, socket of the +connection, etc. + +A server can have several clients, but needn't have any. So, if you +have a server and three clients are connected, you have one instance +of a rfbScreenInfo and three instances of rfbClientRec's. + +The rfbClientRec structure holds a member + rfbScreenInfoPtr screen +which points to the server and a member + rfbClientPtr next +to the next client. + +The rfbScreenInfo structure holds a member + rfbClientPtr rfbClientHead +which points to the first client. + +So, to access the server from the client structure, you use client->screen. +To access all clients from a server, get screen->rfbClientHead and +iterate using client->next. + +If you change client settings, be sure to use the provided iterator + rfbGetClientIterator(rfbScreen) +with + rfbClientIteratorNext(iterator) +and + rfbReleaseClientIterator +to prevent thread clashes. + +Other options +------------- + +These options have to be set between rfbGetScreen and rfbInitServer. + +If you already have a socket to talk to, just set rfbScreen->inetdSock +(originally this is for inetd handling, but why not use it for your purpose?). + +To also start an HTTP server (running on port 5800+display_number), you have +to set rfbScreen->httpdDir to a directory containing vncviewer.jar and +index.vnc (like the included "webclients" directory). + +Hooks and IO functions +---------------------- + +There exist the following IO functions as members of rfbScreen: +kbdAddEvent, kbdReleaseAllKeys, ptrAddEvent and setXCutText + +kbdAddEvent(rfbBool down,rfbKeySym key,rfbClientPtr cl) + is called when a key is pressed. +kbdReleaseAllKeys(rfbClientPtr cl) + is not called at all (maybe in the future). +ptrAddEvent(int buttonMask,int x,int y,rfbClientPtr cl) + is called when the mouse moves or a button is pressed. + WARNING: if you want to have proper cursor handling, call + defaultPtrAddEvent(buttonMask,x,y,cl) + in your own function. This sets the coordinates of the cursor. +setXCutText(char* str,int len,rfbClientPtr cl) + is called when the selection changes. + +There are only two hooks: +newClientHook(rfbClientPtr cl) + is called when a new client has connected. +displayHook + is called just before a frame buffer update is sent. + +You can also override the following methods: +getCursorPtr(rfbClientPtr cl) + This could be used to make an animated cursor (if you really want ...) +setTranslateFunction(rfbClientPtr cl) + If you insist on colour maps or something more obscure, you have to + implement this. Default is a trueColour mapping. + +Cursor handling +--------------- + +The screen holds a pointer + rfbCursorPtr cursor +to the current cursor. Whenever you set it, remember that any dynamically +created cursor (like return value from rfbMakeXCursor) is not free'd! + +The rfbCursor structure consists mainly of a mask and a source. The mask +describes, which pixels are drawn for the cursor (a cursor needn't be +rectangular). The source describes, which colour those pixels should have. + +The standard is an XCursor: a cursor with a foreground and a background +colour (stored in backRed,backGreen,backBlue and the same for foreground +in a range from 0-0xffff). Therefore, the arrays "mask" and "source" +contain pixels as single bits stored in bytes in MSB order. The rows are +padded, such that each row begins with a new byte (i.e. a 10x4 +cursor's mask has 2x4 bytes, because 2 bytes are needed to hold 10 bits). + +It is however very easy to make a cursor like this: + +char* cur=" " + " xx " + " x " + " "; +char* mask="xxxx" + "xxxx" + "xxxx" + "xxx "; +rfbCursorPtr c=rfbMakeXCursor(4,4,cur,mask); + +You can even set "mask" to NULL in this call and LibVNCServer will calculate +a mask for you (dynamically, so you have to free it yourself). + +There is also an array named "richSource" for colourful cursors. They have +the same format as the frameBuffer (i.e. if the server is 32 bit, +a 10x4 cursor has 4x10x4 bytes). + +History +------- + +LibVNCServer is based on Tridia VNC and OSXvnc, which in turn are based on +the original code from ORL/AT&T. + +When I began hacking with computers, my first interest was speed. So, when I +got around assembler, I programmed the floppy to do much of the work, because +it's clock rate was higher than that of my C64. This was my first experience +with client/server techniques. + +When I came around Xwindows (much later), I was at once intrigued by the +elegance of such connectedness between the different computers. I used it +a lot - not the least priority lay on games. However, when I tried it over +modem from home, it was no longer that much fun. + +When I started working with ASP (Application Service Provider) programs, I +tumbled across Tarantella and Citrix. Being a security fanatic, the idea of +running a server on windows didn't appeal to me, so Citrix went down the +basket. However, Tarantella has it's own problems (security as well as the +high price). But at the same time somebody told me about this "great little +administrator's tool" named VNC. Being used to windows programs' sizes, the +surprise was reciprocal inverse to the size of VNC! + +At the same time, the program "rdesktop" (a native Linux client for the +Terminal Services of Windows servers) came to my attention. There where even +works under way to make a protocol converter "rdp2vnc" out of this. However, +my primary goal was a slow connection and rdp2vnc could only speak RRE +encoding, which is not that funny with just 5kB/s. Tim Edmonds, the original +author of rdp2vnc, suggested that I adapt it to Hextile Encoding, which is +better. I first tried that, but had no success at all (crunchy pictures). + +Also, I liked the idea of an HTTP server included and possibly other +encodings like the Tight Encodings from Const Kaplinsky. So I started looking +for libraries implementing a VNC server where I could steal what I can't make. +I found some programs based on the demo server from AT&T, which was also the +basis for rdp2vnc (can only speak Raw and RRE encoding). There were some +rumors that GGI has a VNC backend, but I didn't find any code, so probably +there wasn't a working version anyway. + +All of a sudden, everything changed: I read on freshmeat that "OSXvnc" was +released. I looked at the code and it was not much of a problem to work out +a simple server - using every functionality there is in Xvnc. It became clear +to me that I *had* to build a library out of it, so everybody can use it. +Every change, every new feature can propagate to every user of it. + +It also makes everything easier: + You don't care about the cursor, once set (or use the standard cursor). +You don't care about those sockets. You don't care about encodings. +You just change your frame buffer and inform the library about it. Every once +in a while you call rfbProcessEvents and that's it. + +Basics +------ + +VNC (Virtual network computing) works like this: You set up a server and can +connect to it via vncviewers. The communication uses a protocol named RFB +(Remote Frame Buffer). If the server supports HTTP, you can also connect +using a java enabled browser. In this case, the server sends back a +vncviewer applet with the correct settings. + +There exist several encodings for VNC, which are used to compress the regions +which have changed before they are sent to the client. A client need not be +able to understand every encoding, but at least Raw encoding. Which encoding +it understands is negotiated by the RFB protocol. + +The following encodings are known to me: +Raw, RRE, CoRRE, Hextile, CopyRect from the original AT&T code and +Tight, ZLib, LastRect, XCursor, RichCursor from Const Kaplinsky et al. + +If you are using a modem, you want to try the "new" encodings. Especially +with my 56k modem I like ZLib or Tight with Quality 0. In my tests, it even +beats Tarantella. + +There is the possibility to set a password, which is also negotiated by the +RFB protocol, but IT IS NOT SECURE. Anybody sniffing your net can get the +password. You really should tunnel through SSH. + +Windows or: why do you do that to me? +-------------------------------------------- + +If you love products from Redmod, you better skip this paragraph. +I am always amazed how people react whenever Microsoft(tm) puts in some +features into their products which were around for a long time. Especially +reporters seem to not know dick about what they are reporting about! But +what is everytime annoying again, is that they don't do it right. Every +concept has it's new name (remember what enumerators used to be until +Mickeysoft(tm) claimed that enumerators are what we thought were iterators. +Yeah right, enumerators are also containers. They are not separated. Muddy.) + +There are three packages you want to get hold of: zlib, jpeg and pthreads. +The latter is not strictly necessary, but when you put something like this +into your source: + +#define MUTEX(s) + struct { + int something; + MUTEX(latex); + } + +Microsoft's C++ compiler doesn't do it. It complains that this is an error. +This, however, is how I implemented mutexes in case you don't need pthreads, +and so don't need the mutex. + +You can find the packages at +http://www.gimp.org/win32/extralibs-dev-20001007.zip + +Thanks go to all the GIMP team! + +What are those other targets in the Makefile? +--------------------------------------------- + +OSXvnc-server is the original OSXvnc adapted to use the library, which was in +turn adapted from OSXvnc. As you easily can see, the OSX dependend part is +minimal. + +storepasswd is the original program to save a vnc style password in a file. +Unfortunately, authentication as every vncviewer speaks it means the server +has to know the plain password. You really should tunnel via ssh or use +your own PasswordCheck to build a PIN/TAN system. + +sratest is a test unit. Run it to assert correct behaviour of sraRegion. I +wrote this to test my iterator implementation. + +blooptest is a test of pthreads. It is just the example, but with a background +loop to hunt down thread lockups. + +pnmshow24 is like pnmshow, but it uses 3 bytes/pixel internally, which is not +as efficient as 4 bytes/pixel for translation, because there is no native data +type of that size, so you have to memcpy pixels and be real cautious with +endianness. Anyway, it works. + +fontsel is a test for rfbSelectBox and rfbLoadConsoleFont. If you have Linux +console fonts, you can browse them via VNC. Directory browsing not implemented +yet :-( + +Why I don't feel bad about GPL +------------------------------ + +At the beginning of this projects I would have liked to make it a BSD +license. However, it is based on plenty of GPL'ed code, so it has to be +a GPL. I hear BeeGee complaining: "but that's invasive, every derivative +work, even just linking, makes my software GPL!" + +Yeah. That's right. It is because there are nasty jarheads out there who +would take anybody's work and claim it their own, selling it for much too +much money, stealing freedom and innovation from others, saying they were +the maintainers of innovation, lying, making money with that. + +The people at AT&T worked really well to produce something as clean and lean +as VNC. The managers decided that for their fame, they would release the +program for free. But not only that! They realized that by releasing also +the code for free, VNC would become an evolving little child, conquering +new worlds, making it's parents very proud. As well they can be! To protect +this innovation, they decided to make it GPL, not BSD. The principal +difference is: You can make closed source programs deriving from BSD, not +from GPL. You have to give proper credit with both. + +Now, why not BSD? Well, imagine your child being some famous actor. Along +comes a manager who exploits your child exclusively, that is: nobody else +can profit from the child, it itself included. Got it? + +What reason do you have now to use this library commercially? + +Several: You don't have to give away your product. Then you have effectively +circumvented the GPL, because you have the benefits of other's work and you +don't give back anything and you will be in hell for that. In fact, this +library, as my other projects, is a payback for all the free software I can +use (and sometimes, make better). For example, just now, I am using XEmacs +on top of XFree86, all running under Linux. + +Better: Use a concept like MySQL. This is free software, however, they make +money with it. If you want something implemented, you have the choice: +Ask them to do it (and pay a fair price), or do it yourself, normally giving +back your enhancements to the free world of computing. + +Learn from it: If you like the style this is written, learn how to imitate +it. If you don't like the style, learn how to avoid those things you don't +like. I learnt so much, just from looking at code like Linux, XEmacs, +LilyPond, STL, etc. + +License +------- + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.dfdf + +Contact +------- + +To contact me, mail me: Johannes dot Schindelin at gmx dot de + diff --git a/jni/vnc/LibVNCServer-0.9.9/TODO b/jni/vnc/LibVNCServer-0.9.9/TODO new file mode 100644 index 0000000..e8f7763 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/TODO @@ -0,0 +1,26 @@ +immediate: +---------- + +make SDLvncviewer more versatile + - test for missing keys (especially "[]{}" with ./examples/mac), + - map Apple/Linux/Windows keys onto each other, + - handle selection + - handle scroll wheel +style fixes: use Linux' coding guidelines & ANSIfy tightvnc-filetransfer: + discuss on list +LibVNCClient cleanup: prefix with "rfbClient", and make sure it does + not deliberately die() or exit() anywhere! +java vncviewer doesn't do colour cursors? +make corre work again (libvncclient or libvncserver?) +teach SDLvncviewer about CopyRect... +implement "-record" in libvncclient +implement QoS for Windows in libvncclient + +later: +------ + +selectbox: scroll bars +authentification schemes (secure vnc) + IO function ptr exists; now explain how to tunnel and implement a + client address restriction scheme. +VisualNaCro testing diff --git a/jni/vnc/LibVNCServer-0.9.9/acinclude.m4 b/jni/vnc/LibVNCServer-0.9.9/acinclude.m4 new file mode 100644 index 0000000..fc947ac --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/acinclude.m4 @@ -0,0 +1,7110 @@ +AH_TEMPLATE(socklen_t, [The type for socklen]) +AC_DEFUN([AC_TYPE_SOCKLEN_T], +[AC_CACHE_CHECK([for socklen_t], ac_cv_type_socklen_t, +[ + AC_TRY_COMPILE( + [#include + #include ], + [socklen_t len = 42; return 0;], + ac_cv_type_socklen_t=yes, + ac_cv_type_socklen_t=no) +]) + if test $ac_cv_type_socklen_t != yes; then + AC_DEFINE(socklen_t, int) + fi +]) + +dnl Available from the GNU Autoconf Macro Archive at: +dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_compile_check_sizeof.html +dnl +AC_DEFUN([AC_COMPILE_CHECK_SIZEOF], +[changequote(<<, >>)dnl +dnl The name to #define. +define(<>, translit(sizeof_$1, [a-z *], [A-Z_P]))dnl +dnl The cache variable name. +define(<>, translit(ac_cv_sizeof_$1, [ *], [_p]))dnl +changequote([, ])dnl +AC_MSG_CHECKING(size of $1) +AC_CACHE_VAL(AC_CV_NAME, +[for ac_size in 4 8 1 2 16 $2 ; do # List sizes in rough order of prevalence. + AC_TRY_COMPILE([#include "confdefs.h" +#include +$2 +], [switch (0) case 0: case (sizeof ($1) == $ac_size):;], AC_CV_NAME=$ac_size) + if test x$AC_CV_NAME != x ; then break; fi +done +]) +if test x$AC_CV_NAME = x ; then + AC_MSG_ERROR([cannot determine a size for $1]) +fi +AC_MSG_RESULT($AC_CV_NAME) +AC_DEFINE_UNQUOTED(AC_TYPE_NAME, $AC_CV_NAME, [The number of bytes in type $1]) +undefine([AC_TYPE_NAME])dnl +undefine([AC_CV_NAME])dnl +]) + +dnl Available from the GNU Autoconf Macro Archive at: +dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_create_stdint_h.html +dnl +AC_DEFUN([AC_CREATE_STDINT_H], +[# ------ AC CREATE STDINT H ------------------------------------- +AC_MSG_CHECKING([for stdint-types....]) +ac_stdint_h=`echo ifelse($1, , _stdint.h, $1)` +if test "$ac_stdint_h" = "stdint.h" ; then + AC_MSG_RESULT("(are you sure you want them in ./stdint.h?)") +elif test "$ac_stdint_h" = "inttypes.h" ; then + AC_MSG_RESULT("(are you sure you want them in ./inttypes.h?)") +else + AC_MSG_RESULT("(putting them into $ac_stdint_h)") +fi + +inttype_headers=`echo inttypes.h sys/inttypes.h sys/inttypes.h $2 \ +| sed -e 's/,/ /g'` + + ac_cv_header_stdint_x="no-file" + ac_cv_header_stdint_o="no-file" + ac_cv_header_stdint_u="no-file" + for i in stdint.h $inttype_headers ; do + unset ac_cv_type_uintptr_t + unset ac_cv_type_uint64_t + _AC_CHECK_TYPE_NEW(uintptr_t,[ac_cv_header_stdint_x=$i],dnl + continue,[#include <$i>]) + AC_CHECK_TYPE(uint64_t,[and64="(uint64_t too)"],[and64=""],[#include<$i>]) + AC_MSG_RESULT(... seen our uintptr_t in $i $and64) + break; + done + if test "$ac_cv_header_stdint_x" = "no-file" ; then + for i in stdint.h $inttype_headers ; do + unset ac_cv_type_uint32_t + unset ac_cv_type_uint64_t + AC_CHECK_TYPE(uint32_t,[ac_cv_header_stdint_o=$i],dnl + continue,[#include <$i>]) + AC_CHECK_TYPE(uint64_t,[and64="(uint64_t too)"],[and64=""],[#include<$i>]) + AC_MSG_RESULT(... seen our uint32_t in $i $and64) + break; + done + if test "$ac_cv_header_stdint_o" = "no-file" ; then + for i in sys/types.h $inttype_headers ; do + unset ac_cv_type_u_int32_t + unset ac_cv_type_u_int64_t + AC_CHECK_TYPE(u_int32_t,[ac_cv_header_stdint_u=$i],dnl + continue,[#include <$i>]) + AC_CHECK_TYPE(uint64_t,[and64="(u_int64_t too)"],[and64=""],[#include<$i>]) + AC_MSG_RESULT(... seen our u_int32_t in $i $and64) + break; + done + fi + fi + +# ----------------- DONE inttypes.h checks MAYBE C basic types -------- + +if test "$ac_cv_header_stdint_x" = "no-file" ; then + AC_COMPILE_CHECK_SIZEOF(char) + AC_COMPILE_CHECK_SIZEOF(short) + AC_COMPILE_CHECK_SIZEOF(int) + AC_COMPILE_CHECK_SIZEOF(long) + AC_COMPILE_CHECK_SIZEOF(void*) + ac_cv_header_stdint_test="yes" +else + ac_cv_header_stdint_test="no" +fi + +# ----------------- DONE inttypes.h checks START header ------------- +_ac_stdint_h=AS_TR_CPP(_$ac_stdint_h) +AC_MSG_RESULT(creating $ac_stdint_h : $_ac_stdint_h) +echo "#ifndef" $_ac_stdint_h >$ac_stdint_h +echo "#define" $_ac_stdint_h "1" >>$ac_stdint_h +echo "#ifndef" _GENERATED_STDINT_H >>$ac_stdint_h +echo "#define" _GENERATED_STDINT_H '"'$PACKAGE $VERSION'"' >>$ac_stdint_h +if test "$GCC" = "yes" ; then + echo "/* generated using a gnu compiler version" `$CC --version` "*/" \ + >>$ac_stdint_h +else + echo "/* generated using $CC */" >>$ac_stdint_h +fi +echo "" >>$ac_stdint_h + +if test "$ac_cv_header_stdint_x" != "no-file" ; then + ac_cv_header_stdint="$ac_cv_header_stdint_x" +elif test "$ac_cv_header_stdint_o" != "no-file" ; then + ac_cv_header_stdint="$ac_cv_header_stdint_o" +elif test "$ac_cv_header_stdint_u" != "no-file" ; then + ac_cv_header_stdint="$ac_cv_header_stdint_u" +else + ac_cv_header_stdint="stddef.h" +fi + +# ----------------- See if int_least and int_fast types are present +unset ac_cv_type_int_least32_t +unset ac_cv_type_int_fast32_t +AC_CHECK_TYPE(int_least32_t,,,[#include <$ac_cv_header_stdint>]) +AC_CHECK_TYPE(int_fast32_t,,,[#include<$ac_cv_header_stdint>]) + +if test "$ac_cv_header_stdint" != "stddef.h" ; then +if test "$ac_cv_header_stdint" != "stdint.h" ; then +AC_MSG_RESULT(..adding include stddef.h) + echo "#include " >>$ac_stdint_h +fi ; fi +AC_MSG_RESULT(..adding include $ac_cv_header_stdint) + echo "#include <$ac_cv_header_stdint>" >>$ac_stdint_h +echo "" >>$ac_stdint_h + +# ----------------- DONE header START basic int types ------------- +if test "$ac_cv_header_stdint_x" = "no-file" ; then + AC_MSG_RESULT(... need to look at C basic types) +dnl ac_cv_header_stdint_test="yes" # moved up before creating the file +else + AC_MSG_RESULT(... seen good stdint.h inttypes) +dnl ac_cv_header_stdint_test="no" # moved up before creating the file +fi + +if test "$ac_cv_header_stdint_u" != "no-file" ; then + AC_MSG_RESULT(... seen bsd/sysv typedefs) + cat >>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h < 199901L + +#ifndef _HAVE_UINT64_T +#define _HAVE_UINT64_T +typedef long long int64_t; +typedef unsigned long long uint64_t; +#endif + +#elif !defined __STRICT_ANSI__ +#if defined _MSC_VER || defined __WATCOMC__ || defined __BORLANDC__ + +#ifndef _HAVE_UINT64_T +#define _HAVE_UINT64_T +typedef __int64 int64_t; +typedef unsigned __int64 uint64_t; +#endif + +#elif defined __GNUC__ || defined __MWERKS__ || defined __ELF__ +dnl /* note: all ELF-systems seem to have loff-support which needs 64-bit */ + +#if !defined _NO_LONGLONG +#ifndef _HAVE_UINT64_T +#define _HAVE_UINT64_T +typedef long long int64_t; +typedef unsigned long long uint64_t; +#endif +#endif + +#elif defined __alpha || (defined __mips && defined _ABIN32) + +#if !defined _NO_LONGLONG +#ifndef _HAVE_UINT64_T +#define _HAVE_UINT64_T +typedef long int64_t; +typedef unsigned long uint64_t; +#endif +#endif + /* compiler/cpu type ... or just ISO C99 */ +#endif +#endif +EOF + +# plus a default 64-bit for systems that are likely to be 64-bit ready + case "$ac_cv_sizeof_x:$ac_cv_sizeof_voidp:$ac_cv_sizeof_long" in + 1:2:8:8) AC_MSG_RESULT(..adding uint64_t default, normal 64-bit system) +cat >>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <@/_/g"` +_PKG=`echo ifelse($2, , $PACKAGE, $2)` +_LOW=`echo _$_PKG | sed -e "y:m4_cr_LETTERS-:m4_cr_letters[]_:"` +_UPP=`echo $_PKG | sed -e "y:m4_cr_letters-:m4_cr_LETTERS[]_:" -e "/^@<:@m4_cr_digits@:>@/s/^/_/"` +_INP=`echo ifelse($3, , _, $3)` +if test "$ac_prefix_conf_INP" = "_"; then + for ac_file in : $CONFIG_HEADERS; do test "_$ac_file" = _: && continue + test -f "$ac_prefix_conf_INP" && continue + case $ac_file in + *.h) test -f $ac_file && _INP=$ac_file ;; + *) + esac + done +fi +if test "$_INP" = "_"; then + case "$_OUT" in + */*) _INP=`basename "$_OUT"` + ;; + *-*) _INP=`echo "$_OUT" | sed -e "s/@<:@_symbol@:>@*-//"` + ;; + *) _INP=config.h + ;; + esac +fi +if test -z "$_PKG" ; then + AC_MSG_ERROR([no prefix for _PREFIX_PKG_CONFIG_H]) +else + if test ! -f "$_INP" ; then if test -f "$srcdir/$_INP" ; then + _INP="$srcdir/$_INP" + fi fi + AC_MSG_NOTICE(creating $_OUT - prefix $_UPP for $_INP defines) + if test -f $_INP ; then + echo "s/@%:@undef *\\(@<:@m4_cr_LETTERS[]_@:>@\\)/@%:@undef $_UPP""_\\1/" > _script + # no! these are things like socklen_t, const, vfork + # echo "s/@%:@undef *\\(@<:@m4_cr_letters@:>@\\)/@%:@undef $_LOW""_\\1/" >> _script + echo "s/@%:@def[]ine *\\(@<:@m4_cr_LETTERS[]_@:>@@<:@_symbol@:>@*\\)\\(.*\\)/@%:@ifndef $_UPP""_\\1 \\" >> _script + echo "@%:@def[]ine $_UPP""_\\1 \\2 \\" >> _script + echo "@%:@endif/" >>_script + # no! these are things like socklen_t, const, vfork + # echo "s/@%:@def[]ine *\\(@<:@m4_cr_letters@:>@@<:@_symbol@:>@*\\)\\(.*\\)/@%:@ifndef $_LOW""_\\1 \\" >> _script + # echo "@%:@define $_LOW""_\\1 \\2 \\" >> _script + # echo "@%:@endif/" >> _script + # now executing _script on _DEF input to create _OUT output file + echo "@%:@ifndef $_DEF" >$tmp/pconfig.h + echo "@%:@def[]ine $_DEF 1" >>$tmp/pconfig.h + echo ' ' >>$tmp/pconfig.h + echo /'*' $_OUT. Generated automatically at end of configure. '*'/ >>$tmp/pconfig.h + + sed -f _script $_INP >>$tmp/pconfig.h + echo ' ' >>$tmp/pconfig.h + echo '/* once:' $_DEF '*/' >>$tmp/pconfig.h + echo "@%:@endif" >>$tmp/pconfig.h + if cmp -s $_OUT $tmp/pconfig.h 2>/dev/null; then + AC_MSG_NOTICE([$_OUT is unchanged]) + else + ac_dir=`AS_DIRNAME(["$_OUT"])` + AS_MKDIR_P(["$ac_dir"]) + rm -f "$_OUT" + mv $tmp/pconfig.h "$_OUT" + fi + cp _script _configs.sed + else + AC_MSG_ERROR([input file $_INP does not exist - skip generating $_OUT]) + fi + rm -f conftest.* +fi +m4_popdef([_symbol])dnl +m4_popdef([_script])dnl +AS_VAR_POPDEF([_INP])dnl +AS_VAR_POPDEF([_UPP])dnl +AS_VAR_POPDEF([_LOW])dnl +AS_VAR_POPDEF([_PKG])dnl +AS_VAR_POPDEF([_DEF])dnl +AS_VAR_POPDEF([_OUT])dnl +],[PACKAGE="$PACKAGE"])]) + +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +## Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 +## Free Software Foundation, Inc. +## Originally by Gordon Matzigkeit , 1996 +## +## This file is free software; the Free Software Foundation gives +## unlimited permission to copy and/or distribute it, with or without +## modifications, as long as this notice is preserved. + +# serial 48 AC_PROG_LIBTOOL + + +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If this macro is not defined by Autoconf, define it here. +m4_ifdef([AC_PROVIDE_IFELSE], + [], + [m4_define([AC_PROVIDE_IFELSE], + [m4_ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) + + +# AC_PROG_LIBTOOL +# --------------- +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [AC_LIBTOOL_CXX], + [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX + ])]) +dnl And a similar setup for Fortran 77 support + AC_PROVIDE_IFELSE([AC_PROG_F77], + [AC_LIBTOOL_F77], + [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +])]) + +dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. + AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [ifdef([AC_PROG_GCJ], + [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([A][M_PROG_GCJ], + [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([LT_AC_PROG_GCJ], + [define([LT_AC_PROG_GCJ], + defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +])])# AC_PROG_LIBTOOL + + +# _AC_PROG_LIBTOOL +# ---------------- +AC_DEFUN([_AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) +])# _AC_PROG_LIBTOOL + + +# AC_LIBTOOL_SETUP +# ---------------- +AC_DEFUN([AC_LIBTOOL_SETUP], +[AC_PREREQ(2.50)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +AC_REQUIRE([AC_PROG_NM])dnl + +AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl +dnl + +AC_LIBTOOL_SYS_MAX_CMD_LEN +AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LIBTOOL_OBJDIR + +AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +_LT_AC_PROG_ECHO_BACKSLASH + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e 1s/^X//' +[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + +# Same as above, but do not quote variable references. +[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +AC_CHECK_TOOL(AR, ar, false) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; +esac + +AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +enable_win32_dll=yes, enable_win32_dll=no) + +AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +AC_ARG_WITH([pic], + [AC_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +AC_LIBTOOL_LANG_C_CONFIG +_LT_AC_TAGCONFIG +])# AC_LIBTOOL_SETUP + + +# _LT_AC_SYS_COMPILER +# ------------------- +AC_DEFUN([_LT_AC_SYS_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_AC_SYS_COMPILER + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +AC_DEFUN([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +]) + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +AC_DEFUN([_LT_COMPILER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +AC_DEFUN([_LT_LINKER_BOILERPLATE], +[ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* +])# _LT_LINKER_BOILERPLATE + + +# _LT_AC_SYS_LIBPATH_AIX +# ---------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_AC_SYS_LIBPATH_AIX + + +# _LT_AC_SHELL_INIT(ARG) +# ---------------------- +AC_DEFUN([_LT_AC_SHELL_INIT], +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_AC_SHELL_INIT + + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[_LT_AC_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null 2>&1 && unset CDPATH + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +])])# _LT_AC_PROG_ECHO_BACKSLASH + + +# _LT_AC_LOCK +# ----------- +AC_DEFUN([_LT_AC_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) LD="${LD-ld} -64" ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; + ]) +esac + +need_locks="$enable_libtool_lock" + +])# _LT_AC_LOCK + + +# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +[AC_REQUIRE([LT_AC_PROG_SED]) +AC_CACHE_CHECK([$1], [$2], + [$2=no + ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $rm conftest* +]) + +if test x"[$]$2" = xyes; then + ifelse([$5], , :, [$5]) +else + ifelse([$6], , :, [$6]) +fi +])# AC_LIBTOOL_COMPILER_OPTION + + +# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ------------------------------------------------------------ +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +[AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + ifelse([$4], , :, [$4]) +else + ifelse([$5], , :, [$5]) +fi +])# AC_LIBTOOL_LINKER_OPTION + + +# AC_LIBTOOL_SYS_MAX_CMD_LEN +# -------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +[# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + teststring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +])# AC_LIBTOOL_SYS_MAX_CMD_LEN + + +# _LT_AC_CHECK_DLFCN +# ------------------ +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h)dnl +])# _LT_AC_CHECK_DLFCN + + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# --------------------------------------------------------------------- +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF + + +# AC_LIBTOOL_DLOPEN_SELF +# ---------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + + +# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +# --------------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler +AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* +]) +])# AC_LIBTOOL_PROG_CC_C_O + + +# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +# ----------------------------------------- +# Check to see if we can do hard links to lock some files if needed +AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +[AC_REQUIRE([_LT_AC_LOCK])dnl + +hard_links="nottested" +if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + + +# AC_LIBTOOL_OBJDIR +# ----------------- +AC_DEFUN([AC_LIBTOOL_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +])# AC_LIBTOOL_OBJDIR + + +# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +# ---------------------------------------------- +# Check hardcoding attributes. +AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_AC_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ + test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_AC_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_AC_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + + +# AC_LIBTOOL_SYS_LIB_STRIP +# ------------------------ +AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +[striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) +fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +])# AC_LIBTOOL_SYS_LIB_STRIP + + +# AC_LIBTOOL_SYS_DYNAMIC_LINKER +# ----------------------------- +# PORTME Fill in your ld.so characteristics +AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +[AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[123]]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + freebsd*) # from 4.6 on + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix3*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi +])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + +# _LT_AC_TAGCONFIG +# ---------------- +AC_DEFUN([_LT_AC_TAGCONFIG], +[AC_ARG_WITH([tags], + [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], + [include additional configurations @<:@automatic@:>@])], + [tagnames="$withval"]) + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + AC_MSG_WARN([output file `$ofile' does not exist]) + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) + else + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi + fi + if test -z "$LTCFLAGS"; then + eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in + "") ;; + *) AC_MSG_ERROR([invalid tag name: $tagname]) + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + AC_MSG_ERROR([tag name \"$tagname\" already exists]) + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_LIBTOOL_LANG_CXX_CONFIG + else + tagname="" + fi + ;; + + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + AC_LIBTOOL_LANG_F77_CONFIG + else + tagname="" + fi + ;; + + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + AC_LIBTOOL_LANG_GCJ_CONFIG + else + tagname="" + fi + ;; + + RC) + AC_LIBTOOL_LANG_RC_CONFIG + ;; + + *) + AC_MSG_ERROR([Unsupported tag name: $tagname]) + ;; + esac + + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" + + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + AC_MSG_ERROR([unable to update list of available tagged configurations.]) + fi +fi +])# _LT_AC_TAGCONFIG + + +# AC_LIBTOOL_DLOPEN +# ----------------- +# enable checks for dlopen support +AC_DEFUN([AC_LIBTOOL_DLOPEN], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_DLOPEN + + +# AC_LIBTOOL_WIN32_DLL +# -------------------- +# declare package support for building win32 DLLs +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_WIN32_DLL + + +# AC_ENABLE_SHARED([DEFAULT]) +# --------------------------- +# implement the --enable-shared flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([shared], + [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +])# AC_ENABLE_SHARED + + +# AC_DISABLE_SHARED +# ----------------- +# set the default shared flag to --disable-shared +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no) +])# AC_DISABLE_SHARED + + +# AC_ENABLE_STATIC([DEFAULT]) +# --------------------------- +# implement the --enable-static flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([static], + [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]AC_ENABLE_STATIC_DEFAULT) +])# AC_ENABLE_STATIC + + +# AC_DISABLE_STATIC +# ----------------- +# set the default static flag to --disable-static +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no) +])# AC_DISABLE_STATIC + + +# AC_ENABLE_FAST_INSTALL([DEFAULT]) +# --------------------------------- +# implement the --enable-fast-install flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([fast-install], + [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +])# AC_ENABLE_FAST_INSTALL + + +# AC_DISABLE_FAST_INSTALL +# ----------------------- +# set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no) +])# AC_DISABLE_FAST_INSTALL + + +# AC_LIBTOOL_PICMODE([MODE]) +# -------------------------- +# implement the --with-pic flag +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default) +])# AC_LIBTOOL_PICMODE + + +# AC_PROG_EGREP +# ------------- +# This is predefined starting with Autoconf 2.54, so this conditional +# definition can be removed once we require Autoconf 2.54 or later. +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], + [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi]) + EGREP=$ac_cv_prog_egrep + AC_SUBST([EGREP]) +])]) + + +# AC_PATH_TOOL_PREFIX +# ------------------- +# find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +])# AC_PATH_TOOL_PREFIX + + +# AC_PATH_MAGIC +# ------------- +# find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# AC_PATH_MAGIC + + +# AC_PROG_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([AC_PROG_LD], +[AC_ARG_WITH([gnu-ld], + [AC_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no]) +AC_REQUIRE([LT_AC_PROG_SED])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix3*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown +])# AC_DEPLIBS_CHECK_METHOD + + +# AC_PROG_NM +# ---------- +# find the pathname to a BSD-compatible name lister +AC_DEFUN([AC_PROG_NM], +[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi]) +NM="$lt_cv_path_NM" +])# AC_PROG_NM + + +# AC_CHECK_LIBM +# ------------- +# check for math library +AC_DEFUN([AC_CHECK_LIBM], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +])# AC_CHECK_LIBM + + +# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl convenience library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-convenience to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# it is assumed to be `libltdl'. LIBLTDL will be prefixed with +# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' +# (note the single quotes!). If your package is not flat and you're not +# using automake, define top_builddir and top_srcdir appropriately in +# the Makefiles. +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_CONVENIENCE + + +# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl installable library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-install to the configure arguments. Note that +# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +# and an installed libltdl is not found, it is assumed to be `libltdl'. +# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and top_srcdir +# appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, lt_dlinit, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + LTDLINCL= + fi + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_INSTALLABLE + + +# AC_LIBTOOL_CXX +# -------------- +# enable support for C++ libraries +AC_DEFUN([AC_LIBTOOL_CXX], +[AC_REQUIRE([_LT_AC_LANG_CXX]) +])# AC_LIBTOOL_CXX + + +# _LT_AC_LANG_CXX +# --------------- +AC_DEFUN([_LT_AC_LANG_CXX], +[AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +])# _LT_AC_LANG_CXX + +# _LT_AC_PROG_CXXCPP +# ------------------ +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP + +# AC_LIBTOOL_F77 +# -------------- +# enable support for Fortran 77 libraries +AC_DEFUN([AC_LIBTOOL_F77], +[AC_REQUIRE([_LT_AC_LANG_F77]) +])# AC_LIBTOOL_F77 + + +# _LT_AC_LANG_F77 +# --------------- +AC_DEFUN([_LT_AC_LANG_F77], +[AC_REQUIRE([AC_PROG_F77]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +])# _LT_AC_LANG_F77 + + +# AC_LIBTOOL_GCJ +# -------------- +# enable support for GCJ libraries +AC_DEFUN([AC_LIBTOOL_GCJ], +[AC_REQUIRE([_LT_AC_LANG_GCJ]) +])# AC_LIBTOOL_GCJ + + +# _LT_AC_LANG_GCJ +# --------------- +AC_DEFUN([_LT_AC_LANG_GCJ], +[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], + [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], + [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], + [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +])# _LT_AC_LANG_GCJ + + +# AC_LIBTOOL_RC +# ------------- +# enable support for Windows resource files +AC_DEFUN([AC_LIBTOOL_RC], +[AC_REQUIRE([LT_AC_PROG_RC]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +])# AC_LIBTOOL_RC + + +# AC_LIBTOOL_LANG_C_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +AC_DEFUN([_LT_AC_LANG_C_CONFIG], +[lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' + +_LT_AC_SYS_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF + +# Report which library types will actually be built +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case $host_os in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +AC_MSG_RESULT([$enable_shared]) + +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_C_CONFIG + + +# AC_LIBTOOL_LANG_CXX_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +[AC_LANG_PUSH(C++) +AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Dependencies to place before and after the object being linked: +_LT_AC_TAGVAR(predep_objects, $1)= +_LT_AC_TAGVAR(postdep_objects, $1)= +_LT_AC_TAGVAR(predeps, $1)= +_LT_AC_TAGVAR(postdeps, $1)= +_LT_AC_TAGVAR(compiler_lib_search_path, $1)= + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + $as_unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + $as_unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +else + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + AC_PROG_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +_LT_AC_TAGVAR(ld_shlibs, $1)=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes ; then + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + freebsd[[12]]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + freebsd* | kfreebsd*-gnu | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + ;; + gnu*) + ;; + hpux9*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + ;; + *) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + interix3*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + linux*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc*) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC*) + # Portland Group C++ compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + m88k*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + openbsd2*) + # C++ shared libraries are fairly broken + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + ;; + osf3*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. We must also pass each convience library through + # to the system linker between allextract/defaultextract. + # The C++ compiler will combine linker options so we + # cannot just pass the convience library names through + # without $wl. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' + ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='echo' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + # So that behaviour is only enabled if SCOABSPATH is set to a + # non-empty value in the environment. Most likely only useful for + # creating official distributions of packages. + # This is a hack until libtool officially supports absolute path + # names for shared libraries. + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +esac +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_AC_TAGVAR(GCC, $1)="$GXX" +_LT_AC_TAGVAR(LD, $1)="$LD" + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_POSTDEP_PREDEP($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +])# AC_LIBTOOL_LANG_CXX_CONFIG + +# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +# ------------------------------------ +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <> "$cfgfile" +ifelse([$1], [], +[#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e 1s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG], +[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + +# A language-specific compiler. +CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + +# Is the compiler the GNU C compiler? +with_gcc=$_LT_AC_TAGVAR(GCC, $1) + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_[]_LT_AC_TAGVAR(LD, $1) + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) + +# Commands used to build and install a shared archive. +archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" + +# Set to yes if exported symbols are required. +always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) + +# The commands to list exported symbols. +export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) + +# Symbols that must always be exported. +include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) + +ifelse([$1],[], +[# ### END LIBTOOL CONFIG], +[# ### END LIBTOOL TAG CONFIG: $tagname]) + +__EOF__ + +ifelse([$1],[], [ + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +]) +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi +])# AC_LIBTOOL_CONFIG + + +# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + +_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + + AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI + + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[[]] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + + +# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +# --------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= + +AC_MSG_CHECKING([for $compiler option to produce PIC]) + ifelse([$1],[CXX],[ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | kfreebsd*-gnu | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + icpc* | ecpc*) + # Intel C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC*) + # Portland Group C++ compiler. + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + newsos6) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + linux*) + case $cc_basename in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; +esac + +# +# Check to make sure the static flag actually works. +# +wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" +AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) +]) + + +# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +# ------------------------------------ +# See if the linker supports building shared libraries. +AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +ifelse([$1],[CXX],[ + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)= + _LT_AC_TAGVAR(archive_expsym_cmds, $1)= + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_AC_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + _LT_CC_BASENAME([$compiler]) + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + interix3*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + # see comment about different semantics on the GNU ld section + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + bsdi[[45]]*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' + _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi + ;; + + dgux*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu | dragonfly*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + wlarc='' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + *) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +# +# Do we need to explicitly link libc? +# +case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_AC_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac + fi + ;; +esac +])# AC_LIBTOOL_PROG_LD_SHLIBS + + +# _LT_AC_FILE_LTDLL_C +# ------------------- +# Be careful that the start marker always follows a newline. +AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ +])# _LT_AC_FILE_LTDLL_C + + +# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +# --------------------------------- +AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + + +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) + +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) + +AC_DEFUN([LT_AC_PROG_GCJ], +[AC_CHECK_TOOL(GCJ, gcj, no) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS) +]) + +AC_DEFUN([LT_AC_PROG_RC], +[AC_CHECK_TOOL(RC, windres, no) +]) + +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ +# LT_AC_PROG_SED +# -------------- +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +AC_DEFUN([LT_AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_MSG_RESULT([$SED]) +]) + +dnl Autoconf macros for libgcrypt +dnl Copyright (C) 2002, 2004 Free Software Foundation, Inc. +dnl +dnl This file is free software; as a special exception the author gives +dnl unlimited permission to copy and/or distribute it, with or without +dnl modifications, as long as this notice is preserved. +dnl +dnl This file is distributed in the hope that it will be useful, but +dnl WITHOUT ANY WARRANTY, to the extent permitted by law; without even the +dnl implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + + +dnl AM_PATH_LIBGCRYPT([MINIMUM-VERSION, +dnl [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]]) +dnl Test for libgcrypt and define LIBGCRYPT_CFLAGS and LIBGCRYPT_LIBS. +dnl MINIMUN-VERSION is a string with the version number optionalliy prefixed +dnl with the API version to also check the API compatibility. Example: +dnl a MINIMUN-VERSION of 1:1.2.5 won't pass the test unless the installed +dnl version of libgcrypt is at least 1.2.5 *and* the API number is 1. Using +dnl this features allows to prevent build against newer versions of libgcrypt +dnl with a changed API. +dnl +AC_DEFUN([AM_PATH_LIBGCRYPT], +[ AC_ARG_WITH(libgcrypt-prefix, + AC_HELP_STRING([--with-libgcrypt-prefix=PFX], + [prefix where LIBGCRYPT is installed (optional)]), + libgcrypt_config_prefix="$withval", libgcrypt_config_prefix="") + if test x$libgcrypt_config_prefix != x ; then + if test x${LIBGCRYPT_CONFIG+set} != xset ; then + LIBGCRYPT_CONFIG=$libgcrypt_config_prefix/bin/libgcrypt-config + fi + fi + + AC_PATH_PROG(LIBGCRYPT_CONFIG, libgcrypt-config, no) + tmp=ifelse([$1], ,1:1.2.0,$1) + if echo "$tmp" | grep ':' >/dev/null 2>/dev/null ; then + req_libgcrypt_api=`echo "$tmp" | sed 's/\(.*\):\(.*\)/\1/'` + min_libgcrypt_version=`echo "$tmp" | sed 's/\(.*\):\(.*\)/\2/'` + else + req_libgcrypt_api=0 + min_libgcrypt_version="$tmp" + fi + + AC_MSG_CHECKING(for LIBGCRYPT - version >= $min_libgcrypt_version) + ok=no + if test "$LIBGCRYPT_CONFIG" != "no" ; then + req_major=`echo $min_libgcrypt_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\)/\1/'` + req_minor=`echo $min_libgcrypt_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\)/\2/'` + req_micro=`echo $min_libgcrypt_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\)/\3/'` + libgcrypt_config_version=`$LIBGCRYPT_CONFIG --version` + major=`echo $libgcrypt_config_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\).*/\1/'` + minor=`echo $libgcrypt_config_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\).*/\2/'` + micro=`echo $libgcrypt_config_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\).*/\3/'` + if test "$major" -gt "$req_major"; then + ok=yes + else + if test "$major" -eq "$req_major"; then + if test "$minor" -gt "$req_minor"; then + ok=yes + else + if test "$minor" -eq "$req_minor"; then + if test "$micro" -ge "$req_micro"; then + ok=yes + fi + fi + fi + fi + fi + fi + if test $ok = yes; then + AC_MSG_RESULT([yes ($libgcrypt_config_version)]) + else + AC_MSG_RESULT(no) + fi + if test $ok = yes; then + # If we have a recent libgcrypt, we should also check that the + # API is compatible + if test "$req_libgcrypt_api" -gt 0 ; then + tmp=`$LIBGCRYPT_CONFIG --api-version 2>/dev/null || echo 0` + if test "$tmp" -gt 0 ; then + AC_MSG_CHECKING([LIBGCRYPT API version]) + if test "$req_libgcrypt_api" -eq "$tmp" ; then + AC_MSG_RESULT([okay]) + else + ok=no + AC_MSG_RESULT([does not match. want=$req_libgcrypt_api got=$tmp]) + fi + fi + fi + fi + if test $ok = yes; then + LIBGCRYPT_CFLAGS=`$LIBGCRYPT_CONFIG --cflags` + LIBGCRYPT_LIBS=`$LIBGCRYPT_CONFIG --libs` + ifelse([$2], , :, [$2]) + else + LIBGCRYPT_CFLAGS="" + LIBGCRYPT_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(LIBGCRYPT_CFLAGS) + AC_SUBST(LIBGCRYPT_LIBS) +]) diff --git a/jni/vnc/LibVNCServer-0.9.9/aclocal.m4 b/jni/vnc/LibVNCServer-0.9.9/aclocal.m4 new file mode 100644 index 0000000..055db9d --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/aclocal.m4 @@ -0,0 +1,1184 @@ +# generated automatically by aclocal 1.11.1 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],, +[m4_warning([this file was generated for autoconf 2.67. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +# serial 1 (pkg-config-0.24) +# +# Copyright © 2004 Scott James Remnant . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# PKG_PROG_PKG_CONFIG([MIN-VERSION]) +# ---------------------------------- +AC_DEFUN([PKG_PROG_PKG_CONFIG], +[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) +AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) +AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) +AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=m4_default([$1], [0.9.0]) + AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + PKG_CONFIG="" + fi +fi[]dnl +])# PKG_PROG_PKG_CONFIG + +# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +# +# Check to see whether a particular set of modules exists. Similar +# to PKG_CHECK_MODULES(), but does not set variables or print errors. +# +# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +# only at the first occurence in configure.ac, so if the first place +# it's called might be skipped (such as if it is within an "if", you +# have to call PKG_CHECK_EXISTS manually +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_EXISTS], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +if test -n "$PKG_CONFIG" && \ + AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then + m4_default([$2], [:]) +m4_ifvaln([$3], [else + $3])dnl +fi]) + +# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +# --------------------------------------------- +m4_define([_PKG_CONFIG], +[if test -n "$$1"; then + pkg_cv_[]$1="$$1" + elif test -n "$PKG_CONFIG"; then + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], + [pkg_failed=yes]) + else + pkg_failed=untried +fi[]dnl +])# _PKG_CONFIG + +# _PKG_SHORT_ERRORS_SUPPORTED +# ----------------------------- +AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi[]dnl +])# _PKG_SHORT_ERRORS_SUPPORTED + + +# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +# [ACTION-IF-NOT-FOUND]) +# +# +# Note that if there is a possibility the first call to +# PKG_CHECK_MODULES might not happen, you should be sure to include an +# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac +# +# +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_MODULES], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +pkg_failed=no +AC_MSG_CHECKING([for $1]) + +_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +and $1[]_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details.]) + +if test $pkg_failed = yes; then + AC_MSG_RESULT([no]) + _PKG_SHORT_ERRORS_SUPPORTED + if test $_pkg_short_errors_supported = yes; then + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` + else + $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + + m4_default([$4], [AC_MSG_ERROR( +[Package requirements ($2) were not met: + +$$1_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +_PKG_TEXT])[]dnl + ]) +elif test $pkg_failed = untried; then + AC_MSG_RESULT([no]) + m4_default([$4], [AC_MSG_FAILURE( +[The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +_PKG_TEXT + +To get pkg-config, see .])[]dnl + ]) +else + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + AC_MSG_RESULT([yes]) + $3 +fi[]dnl +])# PKG_CHECK_MODULES + +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.11' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.11.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.11.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 9 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 10 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 5 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 16 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.62])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +]) + +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 6 + +# AM_PROG_CC_C_O +# -------------- +# Like AC_PROG_CC_C_O, but changed for automake. +AC_DEFUN([AM_PROG_CC_C_O], +[AC_REQUIRE([AC_PROG_CC_C_O])dnl +AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +# FIXME: we rely on the cache variable name because +# there is no other way. +set dummy $CC +am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` +eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o +if test "$am_t" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +dnl Make sure AC_PROG_CC is never called again, or it will override our +dnl setting of CC. +m4_define([AC_PROG_CC], + [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 6 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check for `mkdir -p'. +AC_DEFUN([AM_PROG_MKDIR_P], +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# (`yes' being less verbose, `no' or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], +[ --enable-silent-rules less verbose build output (undo: `make V=1') + --disable-silent-rules verbose build output (undo: `make V=0')]) +case $enable_silent_rules in +yes) AM_DEFAULT_VERBOSITY=0;; +no) AM_DEFAULT_VERBOSITY=1;; +*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([acinclude.m4]) diff --git a/jni/vnc/LibVNCServer-0.9.9/client_examples/Makefile.am b/jni/vnc/LibVNCServer-0.9.9/client_examples/Makefile.am new file mode 100644 index 0000000..2779d53 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/client_examples/Makefile.am @@ -0,0 +1,42 @@ +INCLUDES = -I$(top_srcdir) +LDADD = ../libvncclient/libvncclient.la @WSOCKLIB@ + +if WITH_FFMPEG +FFMPEG_HOME=@with_ffmpeg@ + +if HAVE_MP3LAME +MP3LAME_LIB=-lmp3lame +endif + +vnc2mpg_CFLAGS=-I$(FFMPEG_HOME)/libavformat -I$(FFMPEG_HOME)/libavcodec -I$(FFMPEG_HOME)/libavutil +vnc2mpg_LDADD=$(LDADD) $(FFMPEG_HOME)/libavformat/libavformat.a $(FFMPEG_HOME)/libavcodec/libavcodec.a $(MP3LAME_LIB) -lm + +FFMPEG_CLIENT=vnc2mpg +endif + +if HAVE_LIBSDL +SDLVIEWER=SDLvncviewer + +SDLvncviewer_CFLAGS=$(SDL_CFLAGS) +SDLvncviewer_SOURCES=SDLvncviewer.c scrap.c scrap.h + +if HAVE_X11 +X11_LIB=-lX11 +endif + +# thanks to autoconf, this looks ugly +SDLvncviewer_LDADD=$(LDADD) $(SDL_LIBS) $(X11_LIB) +endif + +if HAVE_LIBGTK +GTKVIEWER=gtkvncviewer +gtkvncviewer_SOURCES=gtkvncviewer.c +gtkvncviewer_CFLAGS=$(GTK_CFLAGS) +gtkvncviewer_LDADD=$(LDADD) $(GTK_LIBS) +endif + + +noinst_PROGRAMS=ppmtest $(SDLVIEWER) $(GTKVIEWER) $(FFMPEG_CLIENT) backchannel + + + diff --git a/jni/vnc/LibVNCServer-0.9.9/client_examples/Makefile.in b/jni/vnc/LibVNCServer-0.9.9/client_examples/Makefile.in new file mode 100644 index 0000000..314ec76 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/client_examples/Makefile.in @@ -0,0 +1,650 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +noinst_PROGRAMS = ppmtest$(EXEEXT) $(am__EXEEXT_1) $(am__EXEEXT_2) \ + $(am__EXEEXT_3) backchannel$(EXEEXT) +subdir = client_examples +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/rfbconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +@HAVE_LIBSDL_TRUE@am__EXEEXT_1 = SDLvncviewer$(EXEEXT) +@HAVE_LIBGTK_TRUE@am__EXEEXT_2 = gtkvncviewer$(EXEEXT) +@WITH_FFMPEG_TRUE@am__EXEEXT_3 = vnc2mpg$(EXEEXT) +PROGRAMS = $(noinst_PROGRAMS) +am__SDLvncviewer_SOURCES_DIST = SDLvncviewer.c scrap.c scrap.h +@HAVE_LIBSDL_TRUE@am_SDLvncviewer_OBJECTS = \ +@HAVE_LIBSDL_TRUE@ SDLvncviewer-SDLvncviewer.$(OBJEXT) \ +@HAVE_LIBSDL_TRUE@ SDLvncviewer-scrap.$(OBJEXT) +SDLvncviewer_OBJECTS = $(am_SDLvncviewer_OBJECTS) +am__DEPENDENCIES_1 = ../libvncclient/libvncclient.la +am__DEPENDENCIES_2 = +@HAVE_LIBSDL_TRUE@SDLvncviewer_DEPENDENCIES = $(am__DEPENDENCIES_1) \ +@HAVE_LIBSDL_TRUE@ $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_2) +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +SDLvncviewer_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(SDLvncviewer_CFLAGS) \ + $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +backchannel_SOURCES = backchannel.c +backchannel_OBJECTS = backchannel.$(OBJEXT) +backchannel_LDADD = $(LDADD) +backchannel_DEPENDENCIES = ../libvncclient/libvncclient.la +am__gtkvncviewer_SOURCES_DIST = gtkvncviewer.c +@HAVE_LIBGTK_TRUE@am_gtkvncviewer_OBJECTS = \ +@HAVE_LIBGTK_TRUE@ gtkvncviewer-gtkvncviewer.$(OBJEXT) +gtkvncviewer_OBJECTS = $(am_gtkvncviewer_OBJECTS) +@HAVE_LIBGTK_TRUE@gtkvncviewer_DEPENDENCIES = $(am__DEPENDENCIES_1) \ +@HAVE_LIBGTK_TRUE@ $(am__DEPENDENCIES_2) +gtkvncviewer_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(gtkvncviewer_CFLAGS) \ + $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +ppmtest_SOURCES = ppmtest.c +ppmtest_OBJECTS = ppmtest.$(OBJEXT) +ppmtest_LDADD = $(LDADD) +ppmtest_DEPENDENCIES = ../libvncclient/libvncclient.la +vnc2mpg_SOURCES = vnc2mpg.c +vnc2mpg_OBJECTS = vnc2mpg-vnc2mpg.$(OBJEXT) +@WITH_FFMPEG_TRUE@vnc2mpg_DEPENDENCIES = $(am__DEPENDENCIES_1) \ +@WITH_FFMPEG_TRUE@ $(FFMPEG_HOME)/libavformat/libavformat.a \ +@WITH_FFMPEG_TRUE@ $(FFMPEG_HOME)/libavcodec/libavcodec.a \ +@WITH_FFMPEG_TRUE@ $(am__DEPENDENCIES_2) +vnc2mpg_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(vnc2mpg_CFLAGS) \ + $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = $(SDLvncviewer_SOURCES) backchannel.c \ + $(gtkvncviewer_SOURCES) ppmtest.c vnc2mpg.c +DIST_SOURCES = $(am__SDLvncviewer_SOURCES_DIST) backchannel.c \ + $(am__gtkvncviewer_SOURCES_DIST) ppmtest.c vnc2mpg.c +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AVAHI_CFLAGS = @AVAHI_CFLAGS@ +AVAHI_LIBS = @AVAHI_LIBS@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CRYPT_LIBS = @CRYPT_LIBS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LDFLAGS = @JPEG_LDFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +RPMSOURCEDIR = @RPMSOURCEDIR@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSL_LIBS = @SSL_LIBS@ +STRIP = @STRIP@ +SYSTEM_LIBVNCSERVER_CFLAGS = @SYSTEM_LIBVNCSERVER_CFLAGS@ +SYSTEM_LIBVNCSERVER_LIBS = @SYSTEM_LIBVNCSERVER_LIBS@ +VERSION = @VERSION@ +WSOCKLIB = @WSOCKLIB@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_ffmpeg = @with_ffmpeg@ +INCLUDES = -I$(top_srcdir) +LDADD = ../libvncclient/libvncclient.la @WSOCKLIB@ +@WITH_FFMPEG_TRUE@FFMPEG_HOME = @with_ffmpeg@ +@HAVE_MP3LAME_TRUE@@WITH_FFMPEG_TRUE@MP3LAME_LIB = -lmp3lame +@WITH_FFMPEG_TRUE@vnc2mpg_CFLAGS = -I$(FFMPEG_HOME)/libavformat -I$(FFMPEG_HOME)/libavcodec -I$(FFMPEG_HOME)/libavutil +@WITH_FFMPEG_TRUE@vnc2mpg_LDADD = $(LDADD) $(FFMPEG_HOME)/libavformat/libavformat.a $(FFMPEG_HOME)/libavcodec/libavcodec.a $(MP3LAME_LIB) -lm +@WITH_FFMPEG_TRUE@FFMPEG_CLIENT = vnc2mpg +@HAVE_LIBSDL_TRUE@SDLVIEWER = SDLvncviewer +@HAVE_LIBSDL_TRUE@SDLvncviewer_CFLAGS = $(SDL_CFLAGS) +@HAVE_LIBSDL_TRUE@SDLvncviewer_SOURCES = SDLvncviewer.c scrap.c scrap.h +@HAVE_LIBSDL_TRUE@@HAVE_X11_TRUE@X11_LIB = -lX11 + +# thanks to autoconf, this looks ugly +@HAVE_LIBSDL_TRUE@SDLvncviewer_LDADD = $(LDADD) $(SDL_LIBS) $(X11_LIB) +@HAVE_LIBGTK_TRUE@GTKVIEWER = gtkvncviewer +@HAVE_LIBGTK_TRUE@gtkvncviewer_SOURCES = gtkvncviewer.c +@HAVE_LIBGTK_TRUE@gtkvncviewer_CFLAGS = $(GTK_CFLAGS) +@HAVE_LIBGTK_TRUE@gtkvncviewer_LDADD = $(LDADD) $(GTK_LIBS) +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu client_examples/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu client_examples/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +SDLvncviewer$(EXEEXT): $(SDLvncviewer_OBJECTS) $(SDLvncviewer_DEPENDENCIES) + @rm -f SDLvncviewer$(EXEEXT) + $(AM_V_CCLD)$(SDLvncviewer_LINK) $(SDLvncviewer_OBJECTS) $(SDLvncviewer_LDADD) $(LIBS) +backchannel$(EXEEXT): $(backchannel_OBJECTS) $(backchannel_DEPENDENCIES) + @rm -f backchannel$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(backchannel_OBJECTS) $(backchannel_LDADD) $(LIBS) +gtkvncviewer$(EXEEXT): $(gtkvncviewer_OBJECTS) $(gtkvncviewer_DEPENDENCIES) + @rm -f gtkvncviewer$(EXEEXT) + $(AM_V_CCLD)$(gtkvncviewer_LINK) $(gtkvncviewer_OBJECTS) $(gtkvncviewer_LDADD) $(LIBS) +ppmtest$(EXEEXT): $(ppmtest_OBJECTS) $(ppmtest_DEPENDENCIES) + @rm -f ppmtest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(ppmtest_OBJECTS) $(ppmtest_LDADD) $(LIBS) +vnc2mpg$(EXEEXT): $(vnc2mpg_OBJECTS) $(vnc2mpg_DEPENDENCIES) + @rm -f vnc2mpg$(EXEEXT) + $(AM_V_CCLD)$(vnc2mpg_LINK) $(vnc2mpg_OBJECTS) $(vnc2mpg_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SDLvncviewer-SDLvncviewer.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SDLvncviewer-scrap.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/backchannel.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtkvncviewer-gtkvncviewer.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ppmtest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vnc2mpg-vnc2mpg.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +SDLvncviewer-SDLvncviewer.o: SDLvncviewer.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(SDLvncviewer_CFLAGS) $(CFLAGS) -MT SDLvncviewer-SDLvncviewer.o -MD -MP -MF $(DEPDIR)/SDLvncviewer-SDLvncviewer.Tpo -c -o SDLvncviewer-SDLvncviewer.o `test -f 'SDLvncviewer.c' || echo '$(srcdir)/'`SDLvncviewer.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/SDLvncviewer-SDLvncviewer.Tpo $(DEPDIR)/SDLvncviewer-SDLvncviewer.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='SDLvncviewer.c' object='SDLvncviewer-SDLvncviewer.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(SDLvncviewer_CFLAGS) $(CFLAGS) -c -o SDLvncviewer-SDLvncviewer.o `test -f 'SDLvncviewer.c' || echo '$(srcdir)/'`SDLvncviewer.c + +SDLvncviewer-SDLvncviewer.obj: SDLvncviewer.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(SDLvncviewer_CFLAGS) $(CFLAGS) -MT SDLvncviewer-SDLvncviewer.obj -MD -MP -MF $(DEPDIR)/SDLvncviewer-SDLvncviewer.Tpo -c -o SDLvncviewer-SDLvncviewer.obj `if test -f 'SDLvncviewer.c'; then $(CYGPATH_W) 'SDLvncviewer.c'; else $(CYGPATH_W) '$(srcdir)/SDLvncviewer.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/SDLvncviewer-SDLvncviewer.Tpo $(DEPDIR)/SDLvncviewer-SDLvncviewer.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='SDLvncviewer.c' object='SDLvncviewer-SDLvncviewer.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(SDLvncviewer_CFLAGS) $(CFLAGS) -c -o SDLvncviewer-SDLvncviewer.obj `if test -f 'SDLvncviewer.c'; then $(CYGPATH_W) 'SDLvncviewer.c'; else $(CYGPATH_W) '$(srcdir)/SDLvncviewer.c'; fi` + +SDLvncviewer-scrap.o: scrap.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(SDLvncviewer_CFLAGS) $(CFLAGS) -MT SDLvncviewer-scrap.o -MD -MP -MF $(DEPDIR)/SDLvncviewer-scrap.Tpo -c -o SDLvncviewer-scrap.o `test -f 'scrap.c' || echo '$(srcdir)/'`scrap.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/SDLvncviewer-scrap.Tpo $(DEPDIR)/SDLvncviewer-scrap.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='scrap.c' object='SDLvncviewer-scrap.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(SDLvncviewer_CFLAGS) $(CFLAGS) -c -o SDLvncviewer-scrap.o `test -f 'scrap.c' || echo '$(srcdir)/'`scrap.c + +SDLvncviewer-scrap.obj: scrap.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(SDLvncviewer_CFLAGS) $(CFLAGS) -MT SDLvncviewer-scrap.obj -MD -MP -MF $(DEPDIR)/SDLvncviewer-scrap.Tpo -c -o SDLvncviewer-scrap.obj `if test -f 'scrap.c'; then $(CYGPATH_W) 'scrap.c'; else $(CYGPATH_W) '$(srcdir)/scrap.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/SDLvncviewer-scrap.Tpo $(DEPDIR)/SDLvncviewer-scrap.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='scrap.c' object='SDLvncviewer-scrap.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(SDLvncviewer_CFLAGS) $(CFLAGS) -c -o SDLvncviewer-scrap.obj `if test -f 'scrap.c'; then $(CYGPATH_W) 'scrap.c'; else $(CYGPATH_W) '$(srcdir)/scrap.c'; fi` + +gtkvncviewer-gtkvncviewer.o: gtkvncviewer.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtkvncviewer_CFLAGS) $(CFLAGS) -MT gtkvncviewer-gtkvncviewer.o -MD -MP -MF $(DEPDIR)/gtkvncviewer-gtkvncviewer.Tpo -c -o gtkvncviewer-gtkvncviewer.o `test -f 'gtkvncviewer.c' || echo '$(srcdir)/'`gtkvncviewer.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gtkvncviewer-gtkvncviewer.Tpo $(DEPDIR)/gtkvncviewer-gtkvncviewer.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gtkvncviewer.c' object='gtkvncviewer-gtkvncviewer.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtkvncviewer_CFLAGS) $(CFLAGS) -c -o gtkvncviewer-gtkvncviewer.o `test -f 'gtkvncviewer.c' || echo '$(srcdir)/'`gtkvncviewer.c + +gtkvncviewer-gtkvncviewer.obj: gtkvncviewer.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtkvncviewer_CFLAGS) $(CFLAGS) -MT gtkvncviewer-gtkvncviewer.obj -MD -MP -MF $(DEPDIR)/gtkvncviewer-gtkvncviewer.Tpo -c -o gtkvncviewer-gtkvncviewer.obj `if test -f 'gtkvncviewer.c'; then $(CYGPATH_W) 'gtkvncviewer.c'; else $(CYGPATH_W) '$(srcdir)/gtkvncviewer.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/gtkvncviewer-gtkvncviewer.Tpo $(DEPDIR)/gtkvncviewer-gtkvncviewer.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gtkvncviewer.c' object='gtkvncviewer-gtkvncviewer.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtkvncviewer_CFLAGS) $(CFLAGS) -c -o gtkvncviewer-gtkvncviewer.obj `if test -f 'gtkvncviewer.c'; then $(CYGPATH_W) 'gtkvncviewer.c'; else $(CYGPATH_W) '$(srcdir)/gtkvncviewer.c'; fi` + +vnc2mpg-vnc2mpg.o: vnc2mpg.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vnc2mpg_CFLAGS) $(CFLAGS) -MT vnc2mpg-vnc2mpg.o -MD -MP -MF $(DEPDIR)/vnc2mpg-vnc2mpg.Tpo -c -o vnc2mpg-vnc2mpg.o `test -f 'vnc2mpg.c' || echo '$(srcdir)/'`vnc2mpg.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/vnc2mpg-vnc2mpg.Tpo $(DEPDIR)/vnc2mpg-vnc2mpg.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='vnc2mpg.c' object='vnc2mpg-vnc2mpg.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vnc2mpg_CFLAGS) $(CFLAGS) -c -o vnc2mpg-vnc2mpg.o `test -f 'vnc2mpg.c' || echo '$(srcdir)/'`vnc2mpg.c + +vnc2mpg-vnc2mpg.obj: vnc2mpg.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vnc2mpg_CFLAGS) $(CFLAGS) -MT vnc2mpg-vnc2mpg.obj -MD -MP -MF $(DEPDIR)/vnc2mpg-vnc2mpg.Tpo -c -o vnc2mpg-vnc2mpg.obj `if test -f 'vnc2mpg.c'; then $(CYGPATH_W) 'vnc2mpg.c'; else $(CYGPATH_W) '$(srcdir)/vnc2mpg.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/vnc2mpg-vnc2mpg.Tpo $(DEPDIR)/vnc2mpg-vnc2mpg.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='vnc2mpg.c' object='vnc2mpg-vnc2mpg.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vnc2mpg_CFLAGS) $(CFLAGS) -c -o vnc2mpg-vnc2mpg.obj `if test -f 'vnc2mpg.c'; then $(CYGPATH_W) 'vnc2mpg.c'; else $(CYGPATH_W) '$(srcdir)/vnc2mpg.c'; fi` + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-noinstPROGRAMS ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags uninstall uninstall-am + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jni/vnc/LibVNCServer-0.9.9/client_examples/SDLvncviewer.c b/jni/vnc/LibVNCServer-0.9.9/client_examples/SDLvncviewer.c new file mode 100644 index 0000000..8fe6f57 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/client_examples/SDLvncviewer.c @@ -0,0 +1,566 @@ +/** + * @example SDLvncviewer.c + */ + +#include +#include +#include +#include "scrap.h" + +struct { int sdl; int rfb; } buttonMapping[]={ + {1, rfbButton1Mask}, + {2, rfbButton2Mask}, + {3, rfbButton3Mask}, + {4, rfbButton4Mask}, + {5, rfbButton5Mask}, + {0,0} +}; + +static int enableResizable = 1, viewOnly, listenLoop, buttonMask; +#ifdef SDL_ASYNCBLIT + int sdlFlags = SDL_HWSURFACE | SDL_ASYNCBLIT | SDL_HWACCEL; +#else + int sdlFlags = SDL_HWSURFACE | SDL_HWACCEL; +#endif +static int realWidth, realHeight, bytesPerPixel, rowStride; +static char *sdlPixels; + +static int rightAltKeyDown, leftAltKeyDown; + +static rfbBool resize(rfbClient* client) { + int width=client->width,height=client->height, + depth=client->format.bitsPerPixel; + + if (enableResizable) + sdlFlags |= SDL_RESIZABLE; + + client->updateRect.x = client->updateRect.y = 0; + client->updateRect.w = width; client->updateRect.h = height; + rfbBool okay=SDL_VideoModeOK(width,height,depth,sdlFlags); + if(!okay) + for(depth=24;!okay && depth>4;depth/=2) + okay=SDL_VideoModeOK(width,height,depth,sdlFlags); + if(okay) { + SDL_Surface* sdl=SDL_SetVideoMode(width,height,depth,sdlFlags); + rfbClientSetClientData(client, SDL_Init, sdl); + client->width = sdl->pitch / (depth / 8); + if (sdlPixels) { + free(client->frameBuffer); + sdlPixels = NULL; + } + client->frameBuffer=sdl->pixels; + + client->format.bitsPerPixel=depth; + client->format.redShift=sdl->format->Rshift; + client->format.greenShift=sdl->format->Gshift; + client->format.blueShift=sdl->format->Bshift; + client->format.redMax=sdl->format->Rmask>>client->format.redShift; + client->format.greenMax=sdl->format->Gmask>>client->format.greenShift; + client->format.blueMax=sdl->format->Bmask>>client->format.blueShift; + SetFormatAndEncodings(client); + + } else { + SDL_Surface* sdl=rfbClientGetClientData(client, SDL_Init); + rfbClientLog("Could not set resolution %dx%d!\n", + client->width,client->height); + if(sdl) { + client->width=sdl->pitch / (depth / 8); + client->height=sdl->h; + } else { + client->width=0; + client->height=0; + } + return FALSE; + } + SDL_WM_SetCaption(client->desktopName, "SDL"); + return TRUE; +} + +static rfbKeySym SDL_key2rfbKeySym(SDL_KeyboardEvent* e) { + rfbKeySym k = 0; + SDLKey sym = e->keysym.sym; + + switch (sym) { + case SDLK_BACKSPACE: k = XK_BackSpace; break; + case SDLK_TAB: k = XK_Tab; break; + case SDLK_CLEAR: k = XK_Clear; break; + case SDLK_RETURN: k = XK_Return; break; + case SDLK_PAUSE: k = XK_Pause; break; + case SDLK_ESCAPE: k = XK_Escape; break; + case SDLK_SPACE: k = XK_space; break; + case SDLK_DELETE: k = XK_Delete; break; + case SDLK_KP0: k = XK_KP_0; break; + case SDLK_KP1: k = XK_KP_1; break; + case SDLK_KP2: k = XK_KP_2; break; + case SDLK_KP3: k = XK_KP_3; break; + case SDLK_KP4: k = XK_KP_4; break; + case SDLK_KP5: k = XK_KP_5; break; + case SDLK_KP6: k = XK_KP_6; break; + case SDLK_KP7: k = XK_KP_7; break; + case SDLK_KP8: k = XK_KP_8; break; + case SDLK_KP9: k = XK_KP_9; break; + case SDLK_KP_PERIOD: k = XK_KP_Decimal; break; + case SDLK_KP_DIVIDE: k = XK_KP_Divide; break; + case SDLK_KP_MULTIPLY: k = XK_KP_Multiply; break; + case SDLK_KP_MINUS: k = XK_KP_Subtract; break; + case SDLK_KP_PLUS: k = XK_KP_Add; break; + case SDLK_KP_ENTER: k = XK_KP_Enter; break; + case SDLK_KP_EQUALS: k = XK_KP_Equal; break; + case SDLK_UP: k = XK_Up; break; + case SDLK_DOWN: k = XK_Down; break; + case SDLK_RIGHT: k = XK_Right; break; + case SDLK_LEFT: k = XK_Left; break; + case SDLK_INSERT: k = XK_Insert; break; + case SDLK_HOME: k = XK_Home; break; + case SDLK_END: k = XK_End; break; + case SDLK_PAGEUP: k = XK_Page_Up; break; + case SDLK_PAGEDOWN: k = XK_Page_Down; break; + case SDLK_F1: k = XK_F1; break; + case SDLK_F2: k = XK_F2; break; + case SDLK_F3: k = XK_F3; break; + case SDLK_F4: k = XK_F4; break; + case SDLK_F5: k = XK_F5; break; + case SDLK_F6: k = XK_F6; break; + case SDLK_F7: k = XK_F7; break; + case SDLK_F8: k = XK_F8; break; + case SDLK_F9: k = XK_F9; break; + case SDLK_F10: k = XK_F10; break; + case SDLK_F11: k = XK_F11; break; + case SDLK_F12: k = XK_F12; break; + case SDLK_F13: k = XK_F13; break; + case SDLK_F14: k = XK_F14; break; + case SDLK_F15: k = XK_F15; break; + case SDLK_NUMLOCK: k = XK_Num_Lock; break; + case SDLK_CAPSLOCK: k = XK_Caps_Lock; break; + case SDLK_SCROLLOCK: k = XK_Scroll_Lock; break; + case SDLK_RSHIFT: k = XK_Shift_R; break; + case SDLK_LSHIFT: k = XK_Shift_L; break; + case SDLK_RCTRL: k = XK_Control_R; break; + case SDLK_LCTRL: k = XK_Control_L; break; + case SDLK_RALT: k = XK_Alt_R; break; + case SDLK_LALT: k = XK_Alt_L; break; + case SDLK_RMETA: k = XK_Meta_R; break; + case SDLK_LMETA: k = XK_Meta_L; break; + case SDLK_LSUPER: k = XK_Super_L; break; + case SDLK_RSUPER: k = XK_Super_R; break; +#if 0 + case SDLK_COMPOSE: k = XK_Compose; break; +#endif + case SDLK_MODE: k = XK_Mode_switch; break; + case SDLK_HELP: k = XK_Help; break; + case SDLK_PRINT: k = XK_Print; break; + case SDLK_SYSREQ: k = XK_Sys_Req; break; + case SDLK_BREAK: k = XK_Break; break; + default: break; + } + /* both SDL and X11 keysyms match ASCII in the range 0x01-0x7f */ + if (k == 0 && sym > 0x0 && sym < 0x100) { + k = sym; + if (e->keysym.mod & (KMOD_LSHIFT | KMOD_RSHIFT)) { + if (k >= '1' && k <= '9') + k &= ~0x10; + else if (k >= 'a' && k <= 'f') + k &= ~0x20; + } + } + if (k == 0) { + if (e->keysym.unicode < 0x100) + k = e->keysym.unicode; + else + rfbClientLog("Unknown keysym: %d\n", sym); + } + + return k; +} + +static uint32_t get(rfbClient *cl, int x, int y) +{ + switch (bytesPerPixel) { + case 1: return ((uint8_t *)cl->frameBuffer)[x + y * cl->width]; + case 2: return ((uint16_t *)cl->frameBuffer)[x + y * cl->width]; + case 4: return ((uint32_t *)cl->frameBuffer)[x + y * cl->width]; + default: + rfbClientErr("Unknown bytes/pixel: %d", bytesPerPixel); + exit(1); + } +} + +static void put(int x, int y, uint32_t v) +{ + switch (bytesPerPixel) { + case 1: ((uint8_t *)sdlPixels)[x + y * rowStride] = v; break; + case 2: ((uint16_t *)sdlPixels)[x + y * rowStride] = v; break; + case 4: ((uint32_t *)sdlPixels)[x + y * rowStride] = v; break; + default: + rfbClientErr("Unknown bytes/pixel: %d", bytesPerPixel); + exit(1); + } +} + +static void resizeRectangleToReal(rfbClient *cl, int x, int y, int w, int h) +{ + int i0 = x * realWidth / cl->width; + int i1 = ((x + w) * realWidth - 1) / cl->width + 1; + int j0 = y * realHeight / cl->height; + int j1 = ((y + h) * realHeight - 1) / cl->height + 1; + int i, j; + + for (j = j0; j < j1; j++) + for (i = i0; i < i1; i++) { + int x0 = i * cl->width / realWidth; + int x1 = ((i + 1) * cl->width - 1) / realWidth + 1; + int y0 = j * cl->height / realHeight; + int y1 = ((j + 1) * cl->height - 1) / realHeight + 1; + uint32_t r = 0, g = 0, b = 0; + + for (y = y0; y < y1; y++) + for (x = x0; x < x1; x++) { + uint32_t v = get(cl, x, y); +#define REDSHIFT cl->format.redShift +#define REDMAX cl->format.redMax +#define GREENSHIFT cl->format.greenShift +#define GREENMAX cl->format.greenMax +#define BLUESHIFT cl->format.blueShift +#define BLUEMAX cl->format.blueMax + r += (v >> REDSHIFT) & REDMAX; + g += (v >> GREENSHIFT) & GREENMAX; + b += (v >> BLUESHIFT) & BLUEMAX; + } + r /= (x1 - x0) * (y1 - y0); + g /= (x1 - x0) * (y1 - y0); + b /= (x1 - x0) * (y1 - y0); + + put(i, j, (r << REDSHIFT) | (g << GREENSHIFT) | + (b << BLUESHIFT)); + } +} + +static void update(rfbClient* cl,int x,int y,int w,int h) { + if (sdlPixels) { + resizeRectangleToReal(cl, x, y, w, h); + w = ((x + w) * realWidth - 1) / cl->width + 1; + h = ((y + h) * realHeight - 1) / cl->height + 1; + x = x * realWidth / cl->width; + y = y * realHeight / cl->height; + w -= x; + h -= y; + } + SDL_UpdateRect(rfbClientGetClientData(cl, SDL_Init), x, y, w, h); +} + +static void setRealDimension(rfbClient *client, int w, int h) +{ + SDL_Surface* sdl; + + if (w < 0) { + const SDL_VideoInfo *info = SDL_GetVideoInfo(); + w = info->current_h; + h = info->current_w; + } + + if (w == realWidth && h == realHeight) + return; + + if (!sdlPixels) { + int size; + + sdlPixels = (char *)client->frameBuffer; + rowStride = client->width; + + bytesPerPixel = client->format.bitsPerPixel / 8; + size = client->width * bytesPerPixel * client->height; + client->frameBuffer = malloc(size); + if (!client->frameBuffer) { + rfbClientErr("Could not allocate %d bytes", size); + exit(1); + } + memcpy(client->frameBuffer, sdlPixels, size); + } + + sdl = rfbClientGetClientData(client, SDL_Init); + if (sdl->w != w || sdl->h != h) { + int depth = sdl->format->BitsPerPixel; + sdl = SDL_SetVideoMode(w, h, depth, sdlFlags); + rfbClientSetClientData(client, SDL_Init, sdl); + sdlPixels = sdl->pixels; + rowStride = sdl->pitch / (depth / 8); + } + + realWidth = w; + realHeight = h; + update(client, 0, 0, client->width, client->height); +} + +static void kbd_leds(rfbClient* cl, int value, int pad) { + /* note: pad is for future expansion 0=unused */ + fprintf(stderr,"Led State= 0x%02X\n", value); + fflush(stderr); +} + +/* trivial support for textchat */ +static void text_chat(rfbClient* cl, int value, char *text) { + switch(value) { + case rfbTextChatOpen: + fprintf(stderr,"TextChat: We should open a textchat window!\n"); + TextChatOpen(cl); + break; + case rfbTextChatClose: + fprintf(stderr,"TextChat: We should close our window!\n"); + break; + case rfbTextChatFinished: + fprintf(stderr,"TextChat: We should close our window!\n"); + break; + default: + fprintf(stderr,"TextChat: Received \"%s\"\n", text); + break; + } + fflush(stderr); +} + +#ifdef __MINGW32__ +#define LOG_TO_FILE +#endif + +#ifdef LOG_TO_FILE +#include +static void +log_to_file(const char *format, ...) +{ + FILE* logfile; + static char* logfile_str=0; + va_list args; + char buf[256]; + time_t log_clock; + + if(!rfbEnableClientLogging) + return; + + if(logfile_str==0) { + logfile_str=getenv("VNCLOG"); + if(logfile_str==0) + logfile_str="vnc.log"; + } + + logfile=fopen(logfile_str,"a"); + + va_start(args, format); + + time(&log_clock); + strftime(buf, 255, "%d/%m/%Y %X ", localtime(&log_clock)); + fprintf(logfile,buf); + + vfprintf(logfile, format, args); + fflush(logfile); + + va_end(args); + fclose(logfile); +} +#endif + + +static void cleanup(rfbClient* cl) +{ + /* + just in case we're running in listenLoop: + close viewer window by restarting SDL video subsystem + */ + SDL_QuitSubSystem(SDL_INIT_VIDEO); + SDL_InitSubSystem(SDL_INIT_VIDEO); + if(cl) + rfbClientCleanup(cl); +} + + +static rfbBool handleSDLEvent(rfbClient *cl, SDL_Event *e) +{ + switch(e->type) { +#if SDL_MAJOR_VERSION > 1 || SDL_MINOR_VERSION >= 2 + case SDL_VIDEOEXPOSE: + SendFramebufferUpdateRequest(cl, 0, 0, + cl->width, cl->height, FALSE); + break; +#endif + case SDL_MOUSEBUTTONUP: + case SDL_MOUSEBUTTONDOWN: + case SDL_MOUSEMOTION: + { + int x, y, state, i; + if (viewOnly) + break; + + if (e->type == SDL_MOUSEMOTION) { + x = e->motion.x; + y = e->motion.y; + state = e->motion.state; + } + else { + x = e->button.x; + y = e->button.y; + state = e->button.button; + for (i = 0; buttonMapping[i].sdl; i++) + if (state == buttonMapping[i].sdl) { + state = buttonMapping[i].rfb; + if (e->type == SDL_MOUSEBUTTONDOWN) + buttonMask |= state; + else + buttonMask &= ~state; + break; + } + } + if (sdlPixels) { + x = x * cl->width / realWidth; + y = y * cl->height / realHeight; + } + SendPointerEvent(cl, x, y, buttonMask); + buttonMask &= ~(rfbButton4Mask | rfbButton5Mask); + break; + } + case SDL_KEYUP: + case SDL_KEYDOWN: + if (viewOnly) + break; + SendKeyEvent(cl, SDL_key2rfbKeySym(&e->key), + e->type == SDL_KEYDOWN ? TRUE : FALSE); + if (e->key.keysym.sym == SDLK_RALT) + rightAltKeyDown = e->type == SDL_KEYDOWN; + if (e->key.keysym.sym == SDLK_LALT) + leftAltKeyDown = e->type == SDL_KEYDOWN; + break; + case SDL_QUIT: + if(listenLoop) + { + cleanup(cl); + return FALSE; + } + else + { + rfbClientCleanup(cl); + exit(0); + } + case SDL_ACTIVEEVENT: + if (!e->active.gain && rightAltKeyDown) { + SendKeyEvent(cl, XK_Alt_R, FALSE); + rightAltKeyDown = FALSE; + rfbClientLog("released right Alt key\n"); + } + if (!e->active.gain && leftAltKeyDown) { + SendKeyEvent(cl, XK_Alt_L, FALSE); + leftAltKeyDown = FALSE; + rfbClientLog("released left Alt key\n"); + } + + if (e->active.gain && lost_scrap()) { + static char *data = NULL; + static int len = 0; + get_scrap(T('T', 'E', 'X', 'T'), &len, &data); + if (len) + SendClientCutText(cl, data, len); + } + break; + case SDL_SYSWMEVENT: + clipboard_filter(e); + break; + case SDL_VIDEORESIZE: + setRealDimension(cl, e->resize.w, e->resize.h); + break; + default: + rfbClientLog("ignore SDL event: 0x%x\n", e->type); + } + return TRUE; +} + +static void got_selection(rfbClient *cl, const char *text, int len) +{ + put_scrap(T('T', 'E', 'X', 'T'), len, text); +} + + +#ifdef mac +#define main SDLmain +#endif + +int main(int argc,char** argv) { + rfbClient* cl; + int i, j; + SDL_Event e; + +#ifdef LOG_TO_FILE + rfbClientLog=rfbClientErr=log_to_file; +#endif + + for (i = 1, j = 1; i < argc; i++) + if (!strcmp(argv[i], "-viewonly")) + viewOnly = 1; + else if (!strcmp(argv[i], "-resizable")) + enableResizable = 1; + else if (!strcmp(argv[i], "-no-resizable")) + enableResizable = 0; + else if (!strcmp(argv[i], "-listen")) { + listenLoop = 1; + argv[i] = "-listennofork"; + ++j; + } + else { + if (i != j) + argv[j] = argv[i]; + j++; + } + argc = j; + + SDL_Init(SDL_INIT_VIDEO | SDL_INIT_NOPARACHUTE); + SDL_EnableUNICODE(1); + SDL_EnableKeyRepeat(SDL_DEFAULT_REPEAT_DELAY, + SDL_DEFAULT_REPEAT_INTERVAL); + atexit(SDL_Quit); + signal(SIGINT, exit); + + do { + /* 16-bit: cl=rfbGetClient(5,3,2); */ + cl=rfbGetClient(8,3,4); + cl->MallocFrameBuffer=resize; + cl->canHandleNewFBSize = TRUE; + cl->GotFrameBufferUpdate=update; + cl->HandleKeyboardLedState=kbd_leds; + cl->HandleTextChat=text_chat; + cl->GotXCutText = got_selection; + cl->listenPort = LISTEN_PORT_OFFSET; + cl->listen6Port = LISTEN_PORT_OFFSET; + if(!rfbInitClient(cl,&argc,argv)) + { + cl = NULL; /* rfbInitClient has already freed the client struct */ + cleanup(cl); + break; + } + + init_scrap(); + + while(1) { + if(SDL_PollEvent(&e)) { + /* + handleSDLEvent() return 0 if user requested window close. + In this case, handleSDLEvent() will have called cleanup(). + */ + if(!handleSDLEvent(cl, &e)) + break; + } + else { + i=WaitForMessage(cl,500); + if(i<0) + { + cleanup(cl); + break; + } + if(i) + if(!HandleRFBServerMessage(cl)) + { + cleanup(cl); + break; + } + } + } + } + while(listenLoop); + + return 0; +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/client_examples/backchannel.c b/jni/vnc/LibVNCServer-0.9.9/client_examples/backchannel.c new file mode 100644 index 0000000..04d154e --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/client_examples/backchannel.c @@ -0,0 +1,102 @@ +/** + * @example backchannel-client.c + * A simple example of an RFB client + */ + +#include +#include +#include +#include +#include + +static void HandleRect(rfbClient* client, int x, int y, int w, int h) { +} + +/* + * The client part of the back channel extension example. + * + */ + +#define rfbBackChannel 155 + +typedef struct backChannelMsg { + uint8_t type; + uint8_t pad1; + uint16_t pad2; + uint32_t size; +} backChannelMsg; + +static void sendMessage(rfbClient* client, char* text) +{ + backChannelMsg msg; + uint32_t length = strlen(text)+1; + + msg.type = rfbBackChannel; + msg.size = rfbClientSwap32IfLE(length); + if(!WriteToRFBServer(client, (char*)&msg, sizeof(msg)) || + !WriteToRFBServer(client, text, length)) { + rfbClientLog("enableBackChannel: write error (%d: %s)", errno, strerror(errno)); + } +} + +static rfbBool handleBackChannelMessage(rfbClient* client, + rfbServerToClientMsg* message) +{ + backChannelMsg msg; + char* text; + + if(message->type != rfbBackChannel) + return FALSE; + + rfbClientSetClientData(client, sendMessage, sendMessage); + + if(!ReadFromRFBServer(client, ((char*)&msg)+1, sizeof(msg)-1)) + return TRUE; + msg.size = rfbClientSwap32IfLE(msg.size); + text = malloc(msg.size); + if(!ReadFromRFBServer(client, text, msg.size)) { + free(text); + return TRUE; + } + + rfbClientLog("got back channel message: %s\n", text); + free(text); + + return TRUE; +} + +static int backChannelEncodings[] = { rfbBackChannel, 0 }; + +static rfbClientProtocolExtension backChannel = { + backChannelEncodings, /* encodings */ + NULL, /* handleEncoding */ + handleBackChannelMessage, /* handleMessage */ + NULL /* next extension */ +}; + +int +main(int argc, char **argv) +{ + rfbClient* client = rfbGetClient(8,3,4); + + client->GotFrameBufferUpdate = HandleRect; + rfbClientRegisterExtension(&backChannel); + + if (!rfbInitClient(client,&argc,argv)) + return 1; + + while (1) { + /* After each idle second, send a message */ + if(WaitForMessage(client,1000000)>0) + HandleRFBServerMessage(client); + else if(rfbClientGetClientData(client, sendMessage)) + sendMessage(client, "Dear Server,\n" + "thank you for understanding " + "back channel messages!"); + } + + rfbClientCleanup(client); + + return 0; +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/client_examples/gtkvncviewer.c b/jni/vnc/LibVNCServer-0.9.9/client_examples/gtkvncviewer.c new file mode 100644 index 0000000..9e9e72b --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/client_examples/gtkvncviewer.c @@ -0,0 +1,668 @@ + +/* + * Copyright (C) 2007 - Mateus Cesar Groess + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, + * Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include + +static rfbClient *cl; +static gchar *server_cut_text = NULL; +static gboolean framebuffer_allocated = FALSE; + +/* Redraw the screen from the backing pixmap */ +static gboolean expose_event (GtkWidget *widget, + GdkEventExpose *event) +{ + static GdkImage *image = NULL; + + if (framebuffer_allocated == FALSE) { + + rfbClientSetClientData (cl, gtk_init, widget); + + image = gdk_drawable_get_image (widget->window, 0, 0, + widget->allocation.width, + widget->allocation.height); + + cl->frameBuffer= image->mem; + + cl->width = widget->allocation.width; + cl->height = widget->allocation.height; + + cl->format.bitsPerPixel = image->bits_per_pixel; + cl->format.redShift = image->visual->red_shift; + cl->format.greenShift = image->visual->green_shift; + cl->format.blueShift = image->visual->blue_shift; + + cl->format.redMax = (1 << image->visual->red_prec) - 1; + cl->format.greenMax = (1 << image->visual->green_prec) - 1; + cl->format.blueMax = (1 << image->visual->blue_prec) - 1; + + SetFormatAndEncodings (cl); + + framebuffer_allocated = TRUE; + } + + gdk_draw_image (GDK_DRAWABLE (widget->window), + widget->style->fg_gc[gtk_widget_get_state(widget)], + image, + event->area.x, event->area.y, + event->area.x, event->area.y, + event->area.width, event->area.height); + + return FALSE; +} + +struct { int gdk; int rfb; } buttonMapping[] = { + { GDK_BUTTON1_MASK, rfbButton1Mask }, + { GDK_BUTTON2_MASK, rfbButton2Mask }, + { GDK_BUTTON3_MASK, rfbButton3Mask }, + { 0, 0 } +}; + +static gboolean button_event (GtkWidget *widget, + GdkEventButton *event) +{ + int x, y; + GdkModifierType state; + int i, buttonMask; + + gdk_window_get_pointer (event->window, &x, &y, &state); + + for (buttonMask = 0, i = 0; buttonMapping[i].gdk; i++) + if (state & buttonMapping[i].gdk) + buttonMask |= buttonMapping[i].rfb; + SendPointerEvent (cl, x, y, buttonMask); + + return TRUE; +} + +static gboolean motion_notify_event (GtkWidget *widget, + GdkEventMotion *event) +{ + int x, y; + GdkModifierType state; + int i, buttonMask; + + if (event->is_hint) + gdk_window_get_pointer (event->window, &x, &y, &state); + else { + x = event->x; + y = event->y; + state = event->state; + } + + for (buttonMask = 0, i = 0; buttonMapping[i].gdk; i++) + if (state & buttonMapping[i].gdk) + buttonMask |= buttonMapping[i].rfb; + SendPointerEvent (cl, x, y, buttonMask); + + return TRUE; +} + +static void got_cut_text (rfbClient *cl, const char *text, int textlen) +{ + if (server_cut_text != NULL) { + g_free (server_cut_text); + server_cut_text = NULL; + } + + server_cut_text = g_strdup (text); +} + +void received_text_from_clipboard (GtkClipboard *clipboard, + const gchar *text, + gpointer data) +{ + if (text) + SendClientCutText (cl, (char *) text, strlen (text)); +} + +static void clipboard_local_to_remote (GtkMenuItem *menuitem, + gpointer user_data) +{ + GtkClipboard *clipboard; + + clipboard = gtk_widget_get_clipboard (GTK_WIDGET (menuitem), + GDK_SELECTION_CLIPBOARD); + gtk_clipboard_request_text (clipboard, received_text_from_clipboard, + NULL); +} + +static void clipboard_remote_to_local (GtkMenuItem *menuitem, + gpointer user_data) +{ + GtkClipboard *clipboard; + + clipboard = gtk_widget_get_clipboard (GTK_WIDGET (menuitem), + GDK_SELECTION_CLIPBOARD); + + gtk_clipboard_set_text (clipboard, server_cut_text, + strlen (server_cut_text)); +} + +static void request_screen_refresh (GtkMenuItem *menuitem, + gpointer user_data) +{ + SendFramebufferUpdateRequest (cl, 0, 0, cl->width, cl->height, FALSE); +} + +static void send_f8 (GtkMenuItem *menuitem, + gpointer user_data) +{ + SendKeyEvent(cl, XK_F8, TRUE); + SendKeyEvent(cl, XK_F8, FALSE); +} + +static void send_crtl_alt_del (GtkMenuItem *menuitem, + gpointer user_data) +{ + SendKeyEvent(cl, XK_Control_L, TRUE); + SendKeyEvent(cl, XK_Alt_L, TRUE); + SendKeyEvent(cl, XK_Delete, TRUE); + SendKeyEvent(cl, XK_Alt_L, FALSE); + SendKeyEvent(cl, XK_Control_L, FALSE); + SendKeyEvent(cl, XK_Delete, FALSE); +} + +GtkWidget *dialog_connecting = NULL; + +static void show_connect_window(int argc, char **argv) +{ + GtkWidget *label; + char buf[256]; + + dialog_connecting = gtk_dialog_new_with_buttons ("VNC Viewer", + NULL, + GTK_DIALOG_DESTROY_WITH_PARENT, + /*GTK_STOCK_CANCEL, + GTK_RESPONSE_CANCEL,*/ + NULL); + + /* FIXME: this works only when address[:port] is at end of arg list */ + char *server; + if(argc==1) + server = "localhost"; + else + server = argv[argc-1]; + snprintf(buf, 255, "Connecting to %s...", server); + + label = gtk_label_new (buf); + gtk_widget_show (label); + + gtk_container_add (GTK_CONTAINER (GTK_DIALOG(dialog_connecting)->vbox), + label); + + gtk_widget_show (dialog_connecting); + + while (gtk_events_pending ()) + gtk_main_iteration (); +} + +static void show_popup_menu() +{ + GtkWidget *popup_menu; + GtkWidget *menu_item; + + popup_menu = gtk_menu_new (); + + menu_item = gtk_menu_item_new_with_label ("Dismiss popup"); + gtk_widget_show (menu_item); + gtk_menu_shell_append (GTK_MENU_SHELL (popup_menu), menu_item); + + menu_item = gtk_menu_item_new_with_label ("Clipboard: local -> remote"); + g_signal_connect (G_OBJECT (menu_item), "activate", + G_CALLBACK (clipboard_local_to_remote), NULL); + gtk_widget_show (menu_item); + gtk_menu_shell_append (GTK_MENU_SHELL (popup_menu), menu_item); + + menu_item = gtk_menu_item_new_with_label ("Clipboard: local <- remote"); + g_signal_connect (G_OBJECT (menu_item), "activate", + G_CALLBACK (clipboard_remote_to_local), NULL); + gtk_widget_show (menu_item); + gtk_menu_shell_append (GTK_MENU_SHELL (popup_menu), menu_item); + + menu_item = gtk_menu_item_new_with_label ("Request refresh"); + g_signal_connect (G_OBJECT (menu_item), "activate", + G_CALLBACK (request_screen_refresh), NULL); + gtk_widget_show (menu_item); + gtk_menu_shell_append (GTK_MENU_SHELL (popup_menu), menu_item); + + menu_item = gtk_menu_item_new_with_label ("Send ctrl-alt-del"); + g_signal_connect (G_OBJECT (menu_item), "activate", + G_CALLBACK (send_crtl_alt_del), NULL); + gtk_widget_show (menu_item); + gtk_menu_shell_append (GTK_MENU_SHELL (popup_menu), menu_item); + + menu_item = gtk_menu_item_new_with_label ("Send F8"); + g_signal_connect (G_OBJECT (menu_item), "activate", + G_CALLBACK (send_f8), NULL); + gtk_widget_show (menu_item); + gtk_menu_shell_append (GTK_MENU_SHELL (popup_menu), menu_item); + + gtk_menu_popup (GTK_MENU (popup_menu), NULL, NULL, NULL, NULL, 0, + gtk_get_current_event_time()); +} + +static rfbKeySym gdkKey2rfbKeySym(guint keyval) +{ + rfbKeySym k = 0; + switch(keyval) { + case GDK_BackSpace: k = XK_BackSpace; break; + case GDK_Tab: k = XK_Tab; break; + case GDK_Clear: k = XK_Clear; break; + case GDK_Return: k = XK_Return; break; + case GDK_Pause: k = XK_Pause; break; + case GDK_Escape: k = XK_Escape; break; + case GDK_space: k = XK_space; break; + case GDK_Delete: k = XK_Delete; break; + case GDK_KP_0: k = XK_KP_0; break; + case GDK_KP_1: k = XK_KP_1; break; + case GDK_KP_2: k = XK_KP_2; break; + case GDK_KP_3: k = XK_KP_3; break; + case GDK_KP_4: k = XK_KP_4; break; + case GDK_KP_5: k = XK_KP_5; break; + case GDK_KP_6: k = XK_KP_6; break; + case GDK_KP_7: k = XK_KP_7; break; + case GDK_KP_8: k = XK_KP_8; break; + case GDK_KP_9: k = XK_KP_9; break; + case GDK_KP_Decimal: k = XK_KP_Decimal; break; + case GDK_KP_Divide: k = XK_KP_Divide; break; + case GDK_KP_Multiply: k = XK_KP_Multiply; break; + case GDK_KP_Subtract: k = XK_KP_Subtract; break; + case GDK_KP_Add: k = XK_KP_Add; break; + case GDK_KP_Enter: k = XK_KP_Enter; break; + case GDK_KP_Equal: k = XK_KP_Equal; break; + case GDK_Up: k = XK_Up; break; + case GDK_Down: k = XK_Down; break; + case GDK_Right: k = XK_Right; break; + case GDK_Left: k = XK_Left; break; + case GDK_Insert: k = XK_Insert; break; + case GDK_Home: k = XK_Home; break; + case GDK_End: k = XK_End; break; + case GDK_Page_Up: k = XK_Page_Up; break; + case GDK_Page_Down: k = XK_Page_Down; break; + case GDK_F1: k = XK_F1; break; + case GDK_F2: k = XK_F2; break; + case GDK_F3: k = XK_F3; break; + case GDK_F4: k = XK_F4; break; + case GDK_F5: k = XK_F5; break; + case GDK_F6: k = XK_F6; break; + case GDK_F7: k = XK_F7; break; + case GDK_F8: k = XK_F8; break; + case GDK_F9: k = XK_F9; break; + case GDK_F10: k = XK_F10; break; + case GDK_F11: k = XK_F11; break; + case GDK_F12: k = XK_F12; break; + case GDK_F13: k = XK_F13; break; + case GDK_F14: k = XK_F14; break; + case GDK_F15: k = XK_F15; break; + case GDK_Num_Lock: k = XK_Num_Lock; break; + case GDK_Caps_Lock: k = XK_Caps_Lock; break; + case GDK_Scroll_Lock: k = XK_Scroll_Lock; break; + case GDK_Shift_R: k = XK_Shift_R; break; + case GDK_Shift_L: k = XK_Shift_L; break; + case GDK_Control_R: k = XK_Control_R; break; + case GDK_Control_L: k = XK_Control_L; break; + case GDK_Alt_R: k = XK_Alt_R; break; + case GDK_Alt_L: k = XK_Alt_L; break; + case GDK_Meta_R: k = XK_Meta_R; break; + case GDK_Meta_L: k = XK_Meta_L; break; +#if 0 + /* TODO: find out keysyms */ + case GDK_Super_L: k = XK_LSuper; break; /* left "windows" key */ + case GDK_Super_R: k = XK_RSuper; break; /* right "windows" key */ + case GDK_Multi_key: k = XK_Compose; break; +#endif + case GDK_Mode_switch: k = XK_Mode_switch; break; + case GDK_Help: k = XK_Help; break; + case GDK_Print: k = XK_Print; break; + case GDK_Sys_Req: k = XK_Sys_Req; break; + case GDK_Break: k = XK_Break; break; + default: break; + } + if (k == 0) { + if (keyval < 0x100) + k = keyval; + else + rfbClientLog ("Unknown keysym: %d\n", keyval); + } + + return k; +} + +static gboolean key_event (GtkWidget *widget, GdkEventKey *event, + gpointer user_data) +{ + if ((event->type == GDK_KEY_PRESS) && (event->keyval == GDK_F8)) + show_popup_menu(); + else + SendKeyEvent(cl, gdkKey2rfbKeySym (event->keyval), + (event->type == GDK_KEY_PRESS) ? TRUE : FALSE); + return FALSE; +} + +void quit () +{ + exit (0); +} + +static rfbBool resize (rfbClient *client) { + GtkWidget *window; + GtkWidget *scrolled_window; + GtkWidget *drawing_area=NULL; + static char first=TRUE; + int tmp_width, tmp_height; + + if (first) { + first=FALSE; + + /* Create the drawing area */ + + drawing_area = gtk_drawing_area_new (); + gtk_widget_set_size_request (GTK_WIDGET (drawing_area), + client->width, client->height); + + /* Signals used to handle backing pixmap */ + + g_signal_connect (G_OBJECT (drawing_area), "expose_event", + G_CALLBACK (expose_event), NULL); + + /* Event signals */ + + g_signal_connect (G_OBJECT (drawing_area), + "motion-notify-event", + G_CALLBACK (motion_notify_event), NULL); + g_signal_connect (G_OBJECT (drawing_area), + "button-press-event", + G_CALLBACK (button_event), NULL); + g_signal_connect (G_OBJECT (drawing_area), + "button-release-event", + G_CALLBACK (button_event), NULL); + + gtk_widget_set_events (drawing_area, GDK_EXPOSURE_MASK + | GDK_LEAVE_NOTIFY_MASK + | GDK_BUTTON_PRESS_MASK + | GDK_BUTTON_RELEASE_MASK + | GDK_POINTER_MOTION_MASK + | GDK_POINTER_MOTION_HINT_MASK); + + gtk_widget_show (drawing_area); + + scrolled_window = gtk_scrolled_window_new (NULL, NULL); + gtk_scrolled_window_set_policy (GTK_SCROLLED_WINDOW (scrolled_window), + GTK_POLICY_AUTOMATIC, + GTK_POLICY_AUTOMATIC); + gtk_scrolled_window_add_with_viewport ( + GTK_SCROLLED_WINDOW (scrolled_window), + drawing_area); + g_signal_connect (G_OBJECT (scrolled_window), + "key-press-event", G_CALLBACK (key_event), + NULL); + g_signal_connect (G_OBJECT (scrolled_window), + "key-release-event", G_CALLBACK (key_event), + NULL); + gtk_widget_show (scrolled_window); + + window = gtk_window_new (GTK_WINDOW_TOPLEVEL); + gtk_window_set_title (GTK_WINDOW (window), client->desktopName); + gtk_container_add (GTK_CONTAINER (window), scrolled_window); + tmp_width = (int) ( + gdk_screen_get_width (gdk_screen_get_default ()) + * 0.85); + if (client->width > tmp_width) { + tmp_height = (int) ( + gdk_screen_get_height ( + gdk_screen_get_default ()) + * 0.85); + gtk_widget_set_size_request (window, + tmp_width, tmp_height); + } else { + gtk_widget_set_size_request (window, + client->width + 2, + client->height + 2); + } + + g_signal_connect (G_OBJECT (window), "destroy", + G_CALLBACK (quit), NULL); + + gtk_widget_show (window); + } else { + gtk_widget_set_size_request (GTK_WIDGET (drawing_area), + client->width, client->height); + } + + return TRUE; +} + +static void update (rfbClient *cl, int x, int y, int w, int h) { + GtkWidget *drawing_area = rfbClientGetClientData (cl, gtk_init); + + if (drawing_area != NULL) + gtk_widget_queue_draw_area (drawing_area, x, y, w, h); +} + +static void kbd_leds (rfbClient *cl, int value, int pad) { + /* note: pad is for future expansion 0=unused */ + fprintf (stderr, "Led State= 0x%02X\n", value); + fflush (stderr); +} + +/* trivial support for textchat */ +static void text_chat (rfbClient *cl, int value, char *text) { + switch (value) { + case rfbTextChatOpen: + fprintf (stderr, "TextChat: We should open a textchat window!\n"); + TextChatOpen (cl); + break; + case rfbTextChatClose: + fprintf (stderr, "TextChat: We should close our window!\n"); + break; + case rfbTextChatFinished: + fprintf (stderr, "TextChat: We should close our window!\n"); + break; + default: + fprintf (stderr, "TextChat: Received \"%s\"\n", text); + break; + } + fflush (stderr); +} + +static gboolean on_entry_key_press_event (GtkWidget *widget, GdkEventKey *event, + gpointer user_data) +{ + if (event->keyval == GDK_Escape) + gtk_dialog_response (GTK_DIALOG(user_data), GTK_RESPONSE_REJECT); + else if (event->keyval == GDK_Return) + gtk_dialog_response (GTK_DIALOG(user_data), GTK_RESPONSE_ACCEPT); + + return FALSE; +} + +static void GtkErrorLog (const char *format, ...) +{ + GtkWidget *dialog, *label; + va_list args; + char buf[256]; + + if (dialog_connecting != NULL) { + gtk_widget_destroy (dialog_connecting); + dialog_connecting = NULL; + } + + va_start (args, format); + vsnprintf (buf, 255, format, args); + va_end (args); + + if (g_utf8_validate (buf, strlen (buf), NULL)) { + label = gtk_label_new (buf); + } else { + const gchar *charset; + gchar *utf8; + + (void) g_get_charset (&charset); + utf8 = g_convert_with_fallback (buf, strlen (buf), "UTF-8", + charset, NULL, NULL, NULL, NULL); + + if (utf8) { + label = gtk_label_new (utf8); + g_free (utf8); + } else { + label = gtk_label_new (buf); + g_warning ("Message Output is not in UTF-8" + "nor in locale charset.\n"); + } + } + + dialog = gtk_dialog_new_with_buttons ("Error", + NULL, + GTK_DIALOG_DESTROY_WITH_PARENT, + GTK_STOCK_OK, + GTK_RESPONSE_ACCEPT, + NULL); + label = gtk_label_new (buf); + gtk_widget_show (label); + + gtk_container_add (GTK_CONTAINER (GTK_DIALOG(dialog)->vbox), + label); + gtk_widget_show (dialog); + + switch (gtk_dialog_run (GTK_DIALOG (dialog))) { + case GTK_RESPONSE_ACCEPT: + break; + default: + break; + } + gtk_widget_destroy (dialog); +} + +static void GtkDefaultLog (const char *format, ...) +{ + va_list args; + char buf[256]; + time_t log_clock; + + va_start (args, format); + + time (&log_clock); + strftime (buf, 255, "%d/%m/%Y %X ", localtime (&log_clock)); + fprintf (stdout, buf); + + vfprintf (stdout, format, args); + fflush (stdout); + + va_end (args); +} + +static char * get_password (rfbClient *client) +{ + GtkWidget *dialog, *entry; + char *password; + + gtk_widget_destroy (dialog_connecting); + dialog_connecting = NULL; + + dialog = gtk_dialog_new_with_buttons ("Password", + NULL, + GTK_DIALOG_DESTROY_WITH_PARENT, + GTK_STOCK_CANCEL, + GTK_RESPONSE_REJECT, + GTK_STOCK_OK, + GTK_RESPONSE_ACCEPT, + NULL); + entry = gtk_entry_new (); + gtk_entry_set_visibility (GTK_ENTRY (entry), + FALSE); + g_signal_connect (GTK_OBJECT(entry), "key-press-event", + G_CALLBACK(on_entry_key_press_event), + GTK_OBJECT (dialog)); + gtk_widget_show (entry); + + gtk_container_add (GTK_CONTAINER (GTK_DIALOG(dialog)->vbox), + entry); + gtk_widget_show (dialog); + + switch (gtk_dialog_run (GTK_DIALOG (dialog))) { + case GTK_RESPONSE_ACCEPT: + password = strdup (gtk_entry_get_text (GTK_ENTRY (entry))); + break; + default: + password = NULL; + break; + } + gtk_widget_destroy (dialog); + return password; +} + +int main (int argc, char *argv[]) +{ + int i; + GdkImage *image; + + rfbClientLog = GtkDefaultLog; + rfbClientErr = GtkErrorLog; + + gtk_init (&argc, &argv); + + /* create a dummy image just to make use of its properties */ + image = gdk_image_new (GDK_IMAGE_FASTEST, gdk_visual_get_system(), + 200, 100); + + cl = rfbGetClient (image->depth / 3, 3, image->bpp); + + cl->format.redShift = image->visual->red_shift; + cl->format.greenShift = image->visual->green_shift; + cl->format.blueShift = image->visual->blue_shift; + + cl->format.redMax = (1 << image->visual->red_prec) - 1; + cl->format.greenMax = (1 << image->visual->green_prec) - 1; + cl->format.blueMax = (1 << image->visual->blue_prec) - 1; + + g_object_unref (image); + + cl->MallocFrameBuffer = resize; + cl->canHandleNewFBSize = TRUE; + cl->GotFrameBufferUpdate = update; + cl->GotXCutText = got_cut_text; + cl->HandleKeyboardLedState = kbd_leds; + cl->HandleTextChat = text_chat; + cl->GetPassword = get_password; + + show_connect_window (argc, argv); + + if (!rfbInitClient (cl, &argc, argv)) + return 1; + + while (1) { + while (gtk_events_pending ()) + gtk_main_iteration (); + i = WaitForMessage (cl, 500); + if (i < 0) + return 0; + if (i && framebuffer_allocated == TRUE) + if (!HandleRFBServerMessage(cl)) + return 0; + } + + gtk_main (); + + return 0; +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/client_examples/ppmtest.c b/jni/vnc/LibVNCServer-0.9.9/client_examples/ppmtest.c new file mode 100644 index 0000000..b8602f0 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/client_examples/ppmtest.c @@ -0,0 +1,100 @@ +/** + * @example ppmtest.c + * A simple example of an RFB client + */ + +#include +#include +#include +#include +#include + +static void PrintRect(rfbClient* client, int x, int y, int w, int h) { + rfbClientLog("Received an update for %d,%d,%d,%d.\n",x,y,w,h); +} + +static void SaveFramebufferAsPPM(rfbClient* client, int x, int y, int w, int h) { + static time_t t=0,t1; + FILE* f; + int i,j; + rfbPixelFormat* pf=&client->format; + int bpp=pf->bitsPerPixel/8; + int row_stride=client->width*bpp; + + /* save one picture only if the last is older than 2 seconds */ + t1=time(NULL); + if(t1-t>2) + t=t1; + else + return; + + /* assert bpp=4 */ + if(bpp!=4 && bpp!=2) { + rfbClientLog("bpp = %d (!=4)\n",bpp); + return; + } + + f=fopen("framebuffer.ppm","wb"); + if(!f) { + rfbClientErr("Could not open framebuffer.ppm\n"); + return; + } + + fprintf(f,"P6\n# %s\n%d %d\n255\n",client->desktopName,client->width,client->height); + for(j=0;jheight*row_stride;j+=row_stride) + for(i=0;iwidth*bpp;i+=bpp) { + unsigned char* p=client->frameBuffer+j+i; + unsigned int v; + if(bpp==4) + v=*(unsigned int*)p; + else if(bpp==2) + v=*(unsigned short*)p; + else + v=*(unsigned char*)p; + fputc((v>>pf->redShift)*256/(pf->redMax+1),f); + fputc((v>>pf->greenShift)*256/(pf->greenMax+1),f); + fputc((v>>pf->blueShift)*256/(pf->blueMax+1),f); + } + fclose(f); +} + +int +main(int argc, char **argv) +{ + rfbClient* client = rfbGetClient(8,3,4); + time_t t=time(NULL); + + if(argc>1 && !strcmp("-print",argv[1])) { + client->GotFrameBufferUpdate = PrintRect; + argv[1]=argv[0]; argv++; argc--; + } else + client->GotFrameBufferUpdate = SaveFramebufferAsPPM; + + /* The -listen option is used to make us a daemon process which listens for + incoming connections from servers, rather than actively connecting to a + given server. The -tunnel and -via options are useful to create + connections tunneled via SSH port forwarding. We must test for the + -listen option before invoking any Xt functions - this is because we use + forking, and Xt doesn't seem to cope with forking very well. For -listen + option, when a successful incoming connection has been accepted, + listenForIncomingConnections() returns, setting the listenSpecified + flag. */ + + if (!rfbInitClient(client,&argc,argv)) + return 1; + + /* TODO: better wait for update completion */ + while (time(NULL)-t<5) { + static int i=0; + fprintf(stderr,"\r%d",i++); + if(WaitForMessage(client,50)<0) + break; + if(!HandleRFBServerMessage(client)) + break; + } + + rfbClientCleanup(client); + + return 0; +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/client_examples/scrap.c b/jni/vnc/LibVNCServer-0.9.9/client_examples/scrap.c new file mode 100644 index 0000000..c28800c --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/client_examples/scrap.c @@ -0,0 +1,558 @@ +/* Handle clipboard text and data in arbitrary formats */ + +#include +#include + +#ifdef WIN32 +#include +#include +#else +#include +#include +#endif +#include "scrap.h" +#include "rfb/rfbconfig.h" + +/* Determine what type of clipboard we are using */ +#if defined(__unix__) && !defined(__QNXNTO__) && defined(LIBVNCSERVER_HAVE_X11) +#define X11_SCRAP +#elif defined(__WIN32__) +#define WIN_SCRAP +#elif defined(__QNXNTO__) +#define QNX_SCRAP +#else +#warning Unknown window manager for clipboard handling +#endif /* scrap type */ + +/* System dependent data types */ +#if defined(X11_SCRAP) +typedef Atom scrap_type; +static Atom XA_TARGETS, XA_TEXT, XA_COMPOUND_TEXT, XA_UTF8_STRING; +#elif defined(WIN_SCRAP) +typedef UINT scrap_type; +#elif defined(QNX_SCRAP) +typedef uint32_t scrap_type; +#define Ph_CL_TEXT T('T', 'E', 'X', 'T') +#else +typedef int scrap_type; +#endif /* scrap type */ + +/* System dependent variables */ +#if defined(X11_SCRAP) +static Display *SDL_Display; +static Window SDL_Window; +static void (*Lock_Display)(void); +static void (*Unlock_Display)(void); +static Atom XA_UTF8_STRING; +#elif defined(WIN_SCRAP) +static HWND SDL_Window; +#elif defined(QNX_SCRAP) +static unsigned short InputGroup; +#endif /* scrap type */ + +#define FORMAT_PREFIX "SDL_scrap_0x" + +static scrap_type convert_format(int type) +{ + switch (type) { + case T('T', 'E', 'X', 'T'): +#if defined(X11_SCRAP) + return XA_UTF8_STRING ? XA_UTF8_STRING : XA_STRING; +#elif defined(WIN_SCRAP) + return CF_TEXT; +#elif defined(QNX_SCRAP) + return Ph_CL_TEXT; +#endif /* scrap type */ + default: + { + char format[sizeof(FORMAT_PREFIX)+8+1]; + + sprintf(format, "%s%08lx", FORMAT_PREFIX, + (unsigned long)type); +#if defined(X11_SCRAP) + return XInternAtom(SDL_Display, format, False); +#elif defined(WIN_SCRAP) + return RegisterClipboardFormat(format); +#endif /* scrap type */ + } + } +} + +/* Convert internal data to scrap format */ +static int convert_data(int type, char *dst, const char *src, int srclen) +{ + int dstlen; + + dstlen = 0; + switch (type) { + case T('T', 'E', 'X', 'T'): + if (dst) { + while (--srclen >= 0) { +#if defined(__unix__) + if (*src == '\r') { + *dst++ = '\n'; + ++dstlen; + } + else +#elif defined(__WIN32__) + if (*src == '\r') { + *dst++ = '\r'; + ++dstlen; + *dst++ = '\n'; + ++dstlen; + } + else +#endif + { + *dst++ = *src; + ++dstlen; + } + ++src; + } + *dst = '\0'; + ++dstlen; + } + else { + while (--srclen >= 0) { +#if defined(__unix__) + if (*src == '\r') + ++dstlen; + else +#elif defined(__WIN32__) + if (*src == '\r') { + ++dstlen; + ++dstlen; + } + else +#endif + { + ++dstlen; + } + ++src; + } + ++dstlen; + } + break; + default: + if (dst) { + *(int *)dst = srclen; + dst += sizeof(int); + memcpy(dst, src, srclen); + } + dstlen = sizeof(int)+srclen; + break; + } + return(dstlen); +} + +/* Convert scrap data to internal format */ +static int convert_scrap(int type, char *dst, char *src, int srclen) +{ + int dstlen; + + dstlen = 0; + switch (type) { + case T('T', 'E', 'X', 'T'): + { + if (srclen == 0) + srclen = strlen(src); + if (dst) { + while (--srclen >= 0) { +#if defined(__WIN32__) + if (*src == '\r') + /* drop extraneous '\r' */; + else +#endif + if (*src == '\n') { + *dst++ = '\r'; + ++dstlen; + } + else { + *dst++ = *src; + ++dstlen; + } + ++src; + } + *dst = '\0'; + ++dstlen; + } + else { + while (--srclen >= 0) { +#if defined(__WIN32__) + /* drop extraneous '\r' */; + if (*src != '\r') +#endif + ++dstlen; + ++src; + } + ++dstlen; + } + break; + } + default: + dstlen = *(int *)src; + if (dst) + memcpy(dst, src + sizeof(int), + srclen ? srclen - sizeof(int) : dstlen); + break; + } + return dstlen; +} + +int init_scrap(void) +{ + SDL_SysWMinfo info; + int retval; + + /* Grab the window manager specific information */ + retval = -1; + SDL_SetError("SDL is not running on known window manager"); + + SDL_VERSION(&info.version); + if (SDL_GetWMInfo(&info)) { + /* Save the information for later use */ +#if defined(X11_SCRAP) + if (info.subsystem == SDL_SYSWM_X11) { + SDL_Display = info.info.x11.display; + SDL_Window = info.info.x11.window; + Lock_Display = info.info.x11.lock_func; + Unlock_Display = info.info.x11.unlock_func; + + /* Enable the special window hook events */ + SDL_EventState(SDL_SYSWMEVENT, SDL_ENABLE); + SDL_SetEventFilter(clipboard_filter); + + XA_TARGETS = XInternAtom(SDL_Display, "TARGETS", False); + XA_TEXT = XInternAtom(SDL_Display, "TEXT", False); + XA_COMPOUND_TEXT = XInternAtom(SDL_Display, + "COMPOUND_TEXT", False); + XA_UTF8_STRING = XInternAtom(SDL_Display, + "UTF8_STRING", False); + + retval = 0; + } + else + SDL_SetError("SDL is not running on X11"); +#elif defined(WIN_SCRAP) + SDL_Window = info.window; + retval = 0; +#elif defined(QNX_SCRAP) + InputGroup = PhInputGroup(NULL); + retval = 0; +#endif /* scrap type */ + } + return(retval); +} + +int lost_scrap(void) +{ + int retval; + +#if defined(X11_SCRAP) + if (Lock_Display) + Lock_Display(); + retval = (XGetSelectionOwner(SDL_Display, XA_PRIMARY) != SDL_Window); + if (Unlock_Display) + Unlock_Display(); +#elif defined(WIN_SCRAP) + retval = (GetClipboardOwner() != SDL_Window); +#elif defined(QNX_SCRAP) + retval = (PhInputGroup(NULL) != InputGroup); +#endif /* scrap type */ + + return(retval); +} + +void put_scrap(int type, int srclen, const char *src) +{ + scrap_type format; + int dstlen; + char *dst; + + format = convert_format(type); + dstlen = convert_data(type, NULL, src, srclen); + +#if defined(X11_SCRAP) + dst = (char *)malloc(dstlen); + if (dst != NULL) { + if (Lock_Display) + Lock_Display(); + convert_data(type, dst, src, srclen); + XChangeProperty(SDL_Display, DefaultRootWindow(SDL_Display), + XA_CUT_BUFFER0, format, 8, PropModeReplace, + (unsigned char *)dst, dstlen); + free(dst); + if (lost_scrap()) + XSetSelectionOwner(SDL_Display, XA_PRIMARY, + SDL_Window, CurrentTime); + if (Unlock_Display) + Unlock_Display(); + } +#elif defined(WIN_SCRAP) + if (OpenClipboard(SDL_Window)) { + HANDLE hMem; + + hMem = GlobalAlloc((GMEM_MOVEABLE|GMEM_DDESHARE), dstlen); + if (hMem != NULL) { + dst = (char *)GlobalLock(hMem); + convert_data(type, dst, src, srclen); + GlobalUnlock(hMem); + EmptyClipboard(); + SetClipboardData(format, hMem); + } + CloseClipboard(); + } +#elif defined(QNX_SCRAP) +#if (_NTO_VERSION < 620) /* before 6.2.0 releases */ +#define PhClipboardHdr PhClipHeader +#endif + { + PhClipboardHdr clheader = { Ph_CLIPBOARD_TYPE_TEXT, 0, NULL }; + int* cldata; + int status; + + dst = (char *)malloc(dstlen+4); + if (dst != NULL) { + cldata = (int*)dst; + *cldata = type; + convert_data(type, dst+4, src, srclen); + clheader.data = dst; +#if (_NTO_VERSION < 620) /* before 6.2.0 releases */ + if (dstlen > 65535) + /* maximum photon clipboard size :(*/ + clheader.length = 65535; + else +#endif + clheader.length = dstlen+4; + status = PhClipboardCopy(InputGroup, 1, &clheader); + if (status == -1) + fprintf(stderr, + "Photon: copy to clipboard failed!\n"); + free(dst); + } + } +#endif /* scrap type */ +} + +void get_scrap(int type, int *dstlen, char **dst) +{ + scrap_type format; + + *dstlen = 0; + format = convert_format(type); + +#if defined(X11_SCRAP) + { + Window owner; + Atom selection; + Atom seln_type; + int seln_format; + unsigned long nbytes; + unsigned long overflow; + char *src; + + if (Lock_Display) + Lock_Display(); + owner = XGetSelectionOwner(SDL_Display, XA_PRIMARY); + if (Unlock_Display) + Unlock_Display(); + if ((owner == None) || (owner == SDL_Window)) { + owner = DefaultRootWindow(SDL_Display); + selection = XA_CUT_BUFFER0; + } + else { + int selection_response = 0; + SDL_Event event; + + owner = SDL_Window; + if (Lock_Display) + Lock_Display(); + selection = XInternAtom(SDL_Display, "SDL_SELECTION", + False); + XConvertSelection(SDL_Display, XA_PRIMARY, format, + selection, owner, CurrentTime); + if (Unlock_Display) + Unlock_Display(); + while (!selection_response) { + SDL_WaitEvent(&event); + if (event.type == SDL_SYSWMEVENT) { + XEvent xevent = + event.syswm.msg->event.xevent; + + if ((xevent.type == SelectionNotify) && + (xevent.xselection.requestor + == owner)) + selection_response = 1; + } + } + } + if (Lock_Display) + Lock_Display(); + if (XGetWindowProperty(SDL_Display, owner, selection, + 0, INT_MAX/4, False, format, &seln_type, + &seln_format, &nbytes, &overflow, + (unsigned char **)&src) == Success) { + if (seln_type == format) { + *dstlen = convert_scrap(type, NULL, + src, nbytes); + *dst = (char *)realloc(*dst, *dstlen); + if (*dst == NULL) + *dstlen = 0; + else + convert_scrap(type, *dst, src, nbytes); + } + XFree(src); + } + } + if (Unlock_Display) + Unlock_Display(); +#elif defined(WIN_SCRAP) + if (IsClipboardFormatAvailable(format) && OpenClipboard(SDL_Window)) { + HANDLE hMem; + char *src; + + hMem = GetClipboardData(format); + if (hMem != NULL) { + src = (char *)GlobalLock(hMem); + *dstlen = convert_scrap(type, NULL, src, 0); + *dst = (char *)realloc(*dst, *dstlen); + if (*dst == NULL) + *dstlen = 0; + else + convert_scrap(type, *dst, src, 0); + GlobalUnlock(hMem); + } + CloseClipboard(); + } +#elif defined(QNX_SCRAP) +#if (_NTO_VERSION < 620) /* before 6.2.0 releases */ + { + void* clhandle; + PhClipHeader* clheader; + int* cldata; + + clhandle = PhClipboardPasteStart(InputGroup); + if (clhandle != NULL) { + clheader = PhClipboardPasteType(clhandle, + Ph_CLIPBOARD_TYPE_TEXT); + if (clheader != NULL) { + cldata = clheader->data; + if ((clheader->length>4) && (*cldata == type)) { + *dstlen = convert_scrap(type, NULL, + (char*)clheader->data+4, + clheader->length-4); + *dst = (char *)realloc(*dst, *dstlen); + if (*dst == NULL) + *dstlen = 0; + else + convert_scrap(type, *dst, + (char*)clheader->data+4, + clheader->length-4); + } + } + PhClipboardPasteFinish(clhandle); + } + } +#else /* 6.2.0 and 6.2.1 and future releases */ + { + void* clhandle; + PhClipboardHdr* clheader; + int* cldata; + + clheader=PhClipboardRead(InputGroup, Ph_CLIPBOARD_TYPE_TEXT); + if (clheader!=NULL) { + cldata=clheader->data; + if ((clheader->length>4) && (*cldata==type)) { + *dstlen = convert_scrap(type, NULL, + (char*)clheader->data+4, + clheader->length-4); + *dst = (char *)realloc(*dst, *dstlen); + if (*dst == NULL) + *dstlen = 0; + else + convert_scrap(type, *dst, + (char*)clheader->data+4, + clheader->length-4); + } + } + } +#endif +#endif /* scrap type */ +} + +int clipboard_filter(const SDL_Event *event) +{ +#if defined(X11_SCRAP) + /* Post all non-window manager specific events */ + if (event->type != SDL_SYSWMEVENT) + return(1); + + /* Handle window-manager specific clipboard events */ + switch (event->syswm.msg->event.xevent.type) { + /* Copy the selection from XA_CUT_BUFFER0 to the requested property */ + case SelectionRequest: { + XSelectionRequestEvent *req; + XEvent sevent; + int seln_format; + unsigned long nbytes; + unsigned long overflow; + unsigned char *seln_data; + + req = &event->syswm.msg->event.xevent.xselectionrequest; + if (req->target == XA_TARGETS) { + Atom supported[] = { + XA_TEXT, XA_COMPOUND_TEXT, XA_UTF8_STRING, + XA_TARGETS, XA_STRING + }; + XEvent response; + + XChangeProperty(SDL_Display, req->requestor, + req->property, req->target, 32, PropModeReplace, + (unsigned char*)supported, + sizeof(supported) / sizeof(supported[0])); + response.xselection.property=None; + response.xselection.type= SelectionNotify; + response.xselection.display= req->display; + response.xselection.requestor= req->requestor; + response.xselection.selection=req->selection; + response.xselection.target= req->target; + response.xselection.time = req->time; + XSendEvent (SDL_Display, req->requestor,0,0,&response); + XFlush (SDL_Display); + return 1; + } + + sevent.xselection.type = SelectionNotify; + sevent.xselection.display = req->display; + sevent.xselection.selection = req->selection; + sevent.xselection.target = None; + sevent.xselection.property = req->property; + sevent.xselection.requestor = req->requestor; + sevent.xselection.time = req->time; + if (XGetWindowProperty(SDL_Display, + DefaultRootWindow(SDL_Display), XA_CUT_BUFFER0, + 0, INT_MAX/4, False, req->target, + &sevent.xselection.target, &seln_format, + &nbytes, &overflow, &seln_data) == Success) { + if (sevent.xselection.target == req->target) { + if (sevent.xselection.target == XA_STRING && + nbytes > 0 && + seln_data[nbytes-1] == '\0') + --nbytes; + XChangeProperty(SDL_Display, req->requestor, + req->property, sevent.xselection.target, + seln_format, PropModeReplace, + seln_data, nbytes); + sevent.xselection.property = req->property; + } + XFree(seln_data); + } + XSendEvent(SDL_Display,req->requestor,False,0,&sevent); + XSync(SDL_Display, False); + break; + } + } + /* Post the event for X11 clipboard reading above */ +#endif /* X11_SCRAP */ + return(1); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/client_examples/scrap.h b/jni/vnc/LibVNCServer-0.9.9/client_examples/scrap.h new file mode 100644 index 0000000..647bd74 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/client_examples/scrap.h @@ -0,0 +1,18 @@ +/* Handle clipboard text and data in arbitrary formats */ + +/* Miscellaneous defines */ +#define T(A, B, C, D) (int)((A<<24)|(B<<16)|(C<<8)|(D<<0)) + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +extern int init_scrap(void); +extern int lost_scrap(void); +extern void put_scrap(int type, int srclen, const char *src); +extern void get_scrap(int type, int *dstlen, char **dst); +extern int clipboard_filter(const SDL_Event *event); + +#ifdef __cplusplus +} +#endif /* __cplusplus */ diff --git a/jni/vnc/LibVNCServer-0.9.9/client_examples/vnc2mpg.c b/jni/vnc/LibVNCServer-0.9.9/client_examples/vnc2mpg.c new file mode 100644 index 0000000..10c3d3e --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/client_examples/vnc2mpg.c @@ -0,0 +1,436 @@ +/** + * @example vnc2mpg.c + * Simple movie writer for vnc; based on Libavformat API example from FFMPEG + * + * Copyright (c) 2003 Fabrice Bellard, 2004 Johannes E. Schindelin + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#include +#include +#include +#include +#include + +#ifndef M_PI +#define M_PI 3.1415926535897931 +#endif + +#include "avformat.h" +#include + +#define STREAM_FRAME_RATE 25 /* 25 images/s */ + +/**************************************************************/ +/* video output */ + +AVFrame *picture, *tmp_picture; +uint8_t *video_outbuf; +int frame_count, video_outbuf_size; + +/* add a video output stream */ +AVStream *add_video_stream(AVFormatContext *oc, int codec_id, int w, int h) +{ + AVCodecContext *c; + AVStream *st; + + st = av_new_stream(oc, 0); + if (!st) { + fprintf(stderr, "Could not alloc stream\n"); + exit(1); + } + +#if LIBAVFORMAT_BUILD<4629 + c = &st->codec; +#else + c = st->codec; +#endif + c->codec_id = codec_id; + c->codec_type = CODEC_TYPE_VIDEO; + + /* put sample parameters */ + c->bit_rate = 800000; + /* resolution must be a multiple of two */ + c->width = w; + c->height = h; + /* frames per second */ +#if LIBAVCODEC_BUILD<4754 + c->frame_rate = STREAM_FRAME_RATE; + c->frame_rate_base = 1; +#else + c->time_base.den = STREAM_FRAME_RATE; + c->time_base.num = 1; + c->pix_fmt = PIX_FMT_YUV420P; +#endif + c->gop_size = 12; /* emit one intra frame every twelve frames at most */ + if (c->codec_id == CODEC_ID_MPEG2VIDEO) { + /* just for testing, we also add B frames */ + c->max_b_frames = 2; + } + if (c->codec_id == CODEC_ID_MPEG1VIDEO){ + /* needed to avoid using macroblocks in which some coeffs overflow + this doesnt happen with normal video, it just happens here as the + motion of the chroma plane doesnt match the luma plane */ + c->mb_decision=2; + } + /* some formats want stream headers to be seperate */ + if(!strcmp(oc->oformat->name, "mp4") || !strcmp(oc->oformat->name, "mov") || !strcmp(oc->oformat->name, "3gp")) + c->flags |= CODEC_FLAG_GLOBAL_HEADER; + + return st; +} + +AVFrame *alloc_picture(int pix_fmt, int width, int height) +{ + AVFrame *picture; + uint8_t *picture_buf; + int size; + + picture = avcodec_alloc_frame(); + if (!picture) + return NULL; + size = avpicture_get_size(pix_fmt, width, height); + picture_buf = malloc(size); + if (!picture_buf) { + av_free(picture); + return NULL; + } + avpicture_fill((AVPicture *)picture, picture_buf, + pix_fmt, width, height); + return picture; +} + +void open_video(AVFormatContext *oc, AVStream *st) +{ + AVCodec *codec; + AVCodecContext *c; + +#if LIBAVFORMAT_BUILD<4629 + c = &st->codec; +#else + c = st->codec; +#endif + + /* find the video encoder */ + codec = avcodec_find_encoder(c->codec_id); + if (!codec) { + fprintf(stderr, "codec not found\n"); + exit(1); + } + + /* open the codec */ + if (avcodec_open(c, codec) < 0) { + fprintf(stderr, "could not open codec\n"); + exit(1); + } + + video_outbuf = NULL; + if (!(oc->oformat->flags & AVFMT_RAWPICTURE)) { + /* allocate output buffer */ + /* XXX: API change will be done */ + video_outbuf_size = 200000; + video_outbuf = malloc(video_outbuf_size); + } + + /* allocate the encoded raw picture */ + picture = alloc_picture(c->pix_fmt, c->width, c->height); + if (!picture) { + fprintf(stderr, "Could not allocate picture\n"); + exit(1); + } + + /* if the output format is not RGB565, then a temporary RGB565 + picture is needed too. It is then converted to the required + output format */ + tmp_picture = NULL; + if (c->pix_fmt != PIX_FMT_RGB565) { + tmp_picture = alloc_picture(PIX_FMT_RGB565, c->width, c->height); + if (!tmp_picture) { + fprintf(stderr, "Could not allocate temporary picture\n"); + exit(1); + } + } +} + +void write_video_frame(AVFormatContext *oc, AVStream *st) +{ + int out_size, ret; + AVCodecContext *c; + AVFrame *picture_ptr; + +#if LIBAVFORMAT_BUILD<4629 + c = &st->codec; +#else + c = st->codec; +#endif + + if (c->pix_fmt != PIX_FMT_RGB565) { + /* as we only generate a RGB565 picture, we must convert it + to the codec pixel format if needed */ + img_convert((AVPicture *)picture, c->pix_fmt, + (AVPicture *)tmp_picture, PIX_FMT_RGB565, + c->width, c->height); + } + picture_ptr = picture; + + + if (oc->oformat->flags & AVFMT_RAWPICTURE) { + /* raw video case. The API will change slightly in the near + futur for that */ + AVPacket pkt; + av_init_packet(&pkt); + + pkt.flags |= PKT_FLAG_KEY; + pkt.stream_index= st->index; + pkt.data= (uint8_t *)picture_ptr; + pkt.size= sizeof(AVPicture); + + ret = av_write_frame(oc, &pkt); + } else { + /* encode the image */ + out_size = avcodec_encode_video(c, video_outbuf, video_outbuf_size, picture_ptr); + /* if zero size, it means the image was buffered */ + if (out_size != 0) { + AVPacket pkt; + av_init_packet(&pkt); + + pkt.pts= c->coded_frame->pts; + if(c->coded_frame->key_frame) + pkt.flags |= PKT_FLAG_KEY; + pkt.stream_index= st->index; + pkt.data= video_outbuf; + pkt.size= out_size; + + /* write the compressed frame in the media file */ + ret = av_write_frame(oc, &pkt); + } else { + ret = 0; + } + } + if (ret != 0) { + fprintf(stderr, "Error while writing video frame\n"); + exit(1); + } + frame_count++; +} + +void close_video(AVFormatContext *oc, AVStream *st) +{ + avcodec_close(st->codec); + av_free(picture->data[0]); + av_free(picture); + if (tmp_picture) { + av_free(tmp_picture->data[0]); + av_free(tmp_picture); + } + av_free(video_outbuf); +} + +static const char *filename; +static AVOutputFormat *fmt; +static AVFormatContext *oc; +static AVStream *video_st; +static double video_pts; + +static int movie_open(int w, int h) { + if (fmt->video_codec != CODEC_ID_NONE) { + video_st = add_video_stream(oc, fmt->video_codec, w, h); + } else + return 1; + + /* set the output parameters (must be done even if no + parameters). */ + if (av_set_parameters(oc, NULL) < 0) { + fprintf(stderr, "Invalid output format parameters\n"); + return 2; + } + + dump_format(oc, 0, filename, 1); + + /* now that all the parameters are set, we can open the audio and + video codecs and allocate the necessary encode buffers */ + if (video_st) + open_video(oc, video_st); + + /* open the output file, if needed */ + if (!(fmt->flags & AVFMT_NOFILE)) { + if (url_fopen(&oc->pb, filename, URL_WRONLY) < 0) { + fprintf(stderr, "Could not open '%s'\n", filename); + return 3; + } + } + + /* write the stream header, if any */ + av_write_header(oc); + + return 0; +} + +static int movie_close() { + int i; + + /* close each codec */ + close_video(oc, video_st); + + /* write the trailer, if any */ + av_write_trailer(oc); + + /* free the streams */ + for(i = 0; i < oc->nb_streams; i++) { + av_freep(&oc->streams[i]); + } + + if (!(fmt->flags & AVFMT_NOFILE)) { + /* close the output file */ + url_fclose(&oc->pb); + } + + /* free the stream */ + av_free(oc); + +} + +static rfbBool quit=FALSE; +static void signal_handler(int signal) { + fprintf(stderr,"Cleaning up.\n"); + quit=TRUE; +} + +/**************************************************************/ +/* VNC callback functions */ +static rfbBool resize(rfbClient* client) { + static rfbBool first=TRUE; + if(!first) { + movie_close(); + perror("I don't know yet how to change resolutions!\n"); + } + movie_open(client->width, client->height); + signal(SIGINT,signal_handler); + if(tmp_picture) + client->frameBuffer=tmp_picture->data[0]; + else + client->frameBuffer=picture->data[0]; + return TRUE; +} + +static void update(rfbClient* client,int x,int y,int w,int h) { +} + +/**************************************************************/ +/* media file output */ + +int main(int argc, char **argv) +{ + time_t stop=0; + rfbClient* client; + int i,j; + + /* get a vnc client structure (don't connect yet). */ + client = rfbGetClient(5,3,2); + client->format.redShift=11; client->format.redMax=31; + client->format.greenShift=5; client->format.greenMax=63; + client->format.blueShift=0; client->format.blueMax=31; + + /* initialize libavcodec, and register all codecs and formats */ + av_register_all(); + + if(!strncmp(argv[argc-1],":",1) || + !strncmp(argv[argc-1],"127.0.0.1",9) || + !strncmp(argv[argc-1],"localhost",9)) + client->appData.encodingsString="raw"; + + filename=0; + for(i=1;ii+1 && !strcmp("-o",argv[i])) { + filename=argv[2]; + j+=2; + } else if(argc>i+1 && !strcmp("-t",argv[i])) { + stop=time(0)+atoi(argv[i+1]); + j+=2; + } + if(j>i) { + argc-=j-i; + memmove(argv+i,argv+j,(argc-i)*sizeof(char*)); + i--; + } + } + + + /* auto detect the output format from the name. default is + mpeg. */ + fmt = filename?guess_format(NULL, filename, NULL):0; + if (!fmt) { + printf("Could not deduce output format from file extension: using MPEG.\n"); + fmt = guess_format("mpeg", NULL, NULL); + } + if (!fmt) { + fprintf(stderr, "Could not find suitable output format\n"); + exit(1); + } + + /* allocate the output media context */ + oc = av_alloc_format_context(); + if (!oc) { + fprintf(stderr, "Memory error\n"); + exit(1); + } + oc->oformat = fmt; + snprintf(oc->filename, sizeof(oc->filename), "%s", filename); + + /* add the audio and video streams using the default format codecs + and initialize the codecs */ + video_st = NULL; + + /* open VNC connection */ + client->MallocFrameBuffer=resize; + client->GotFrameBufferUpdate=update; + if(!rfbInitClient(client,&argc,argv)) { + printf("usage: %s [-o output_file] [-t seconds] server:port\n" + "Shoot a movie from a VNC server.\n", argv[0]); + exit(1); + } + if(client->serverPort==-1) + client->vncRec->doNotSleep = TRUE; /* vncrec playback */ + + /* main loop */ + + while(!quit) { + int i=WaitForMessage(client,1000000/STREAM_FRAME_RATE); + if(i<0) { + movie_close(); + return 0; + } + if(i) + if(!HandleRFBServerMessage(client)) + quit=TRUE; + else { + /* compute current audio and video time */ + video_pts = (double)video_st->pts.val * video_st->time_base.num / video_st->time_base.den; + + /* write interleaved audio and video frames */ + write_video_frame(oc, video_st); + } + if(stop!=0 && stop> 3] & bytebit[m]) ? 1 : 0; + } + for( i = 0; i < 16; i++ ) { + if( edf == DE1 ) m = (15 - i) << 1; + else m = i << 1; + n = m + 1; + kn[m] = kn[n] = 0L; + for( j = 0; j < 28; j++ ) { + l = j + totrot[i]; + if( l < 28 ) pcr[j] = pc1m[l]; + else pcr[j] = pc1m[l - 28]; + } + for( j = 28; j < 56; j++ ) { + l = j + totrot[i]; + if( l < 56 ) pcr[j] = pc1m[l]; + else pcr[j] = pc1m[l - 28]; + } + for( j = 0; j < 24; j++ ) { + if( pcr[pc2[j]] ) kn[m] |= bigbyte[j]; + if( pcr[pc2[j+24]] ) kn[n] |= bigbyte[j]; + } + } + cookey(kn); + return; + } + +static void cookey(register unsigned long *raw1) +{ + register unsigned long *cook, *raw0; + unsigned long dough[32]; + register int i; + + cook = dough; + for( i = 0; i < 16; i++, raw1++ ) { + raw0 = raw1++; + *cook = (*raw0 & 0x00fc0000L) << 6; + *cook |= (*raw0 & 0x00000fc0L) << 10; + *cook |= (*raw1 & 0x00fc0000L) >> 10; + *cook++ |= (*raw1 & 0x00000fc0L) >> 6; + *cook = (*raw0 & 0x0003f000L) << 12; + *cook |= (*raw0 & 0x0000003fL) << 16; + *cook |= (*raw1 & 0x0003f000L) >> 4; + *cook++ |= (*raw1 & 0x0000003fL); + } + rfbUseKey(dough); + return; + } + +void rfbCPKey(register unsigned long *into) +{ + register unsigned long *from, *endp; + + from = KnL, endp = &KnL[32]; + while( from < endp ) *into++ = *from++; + return; + } + +void rfbUseKey(register unsigned long *from) +{ + register unsigned long *to, *endp; + + to = KnL, endp = &KnL[32]; + while( to < endp ) *to++ = *from++; + return; + } + +void rfbDes(unsigned char *inblock, + unsigned char *outblock) +{ + unsigned long work[2]; + + scrunch(inblock, work); + desfunc(work, KnL); + unscrun(work, outblock); + return; + } + +static void scrunch(register unsigned char *outof, + register unsigned long *into) +{ + *into = (*outof++ & 0xffL) << 24; + *into |= (*outof++ & 0xffL) << 16; + *into |= (*outof++ & 0xffL) << 8; + *into++ |= (*outof++ & 0xffL); + *into = (*outof++ & 0xffL) << 24; + *into |= (*outof++ & 0xffL) << 16; + *into |= (*outof++ & 0xffL) << 8; + *into |= (*outof & 0xffL); + return; + } + +static void unscrun(register unsigned long *outof, + register unsigned char *into) +{ + *into++ = (unsigned char)((*outof >> 24) & 0xffL); + *into++ = (unsigned char)((*outof >> 16) & 0xffL); + *into++ = (unsigned char)((*outof >> 8) & 0xffL); + *into++ = (unsigned char)( *outof++ & 0xffL); + *into++ = (unsigned char)((*outof >> 24) & 0xffL); + *into++ = (unsigned char)((*outof >> 16) & 0xffL); + *into++ = (unsigned char)((*outof >> 8) & 0xffL); + *into = (unsigned char)( *outof & 0xffL); + return; + } + +static unsigned long SP1[64] = { + 0x01010400L, 0x00000000L, 0x00010000L, 0x01010404L, + 0x01010004L, 0x00010404L, 0x00000004L, 0x00010000L, + 0x00000400L, 0x01010400L, 0x01010404L, 0x00000400L, + 0x01000404L, 0x01010004L, 0x01000000L, 0x00000004L, + 0x00000404L, 0x01000400L, 0x01000400L, 0x00010400L, + 0x00010400L, 0x01010000L, 0x01010000L, 0x01000404L, + 0x00010004L, 0x01000004L, 0x01000004L, 0x00010004L, + 0x00000000L, 0x00000404L, 0x00010404L, 0x01000000L, + 0x00010000L, 0x01010404L, 0x00000004L, 0x01010000L, + 0x01010400L, 0x01000000L, 0x01000000L, 0x00000400L, + 0x01010004L, 0x00010000L, 0x00010400L, 0x01000004L, + 0x00000400L, 0x00000004L, 0x01000404L, 0x00010404L, + 0x01010404L, 0x00010004L, 0x01010000L, 0x01000404L, + 0x01000004L, 0x00000404L, 0x00010404L, 0x01010400L, + 0x00000404L, 0x01000400L, 0x01000400L, 0x00000000L, + 0x00010004L, 0x00010400L, 0x00000000L, 0x01010004L }; + +static unsigned long SP2[64] = { + 0x80108020L, 0x80008000L, 0x00008000L, 0x00108020L, + 0x00100000L, 0x00000020L, 0x80100020L, 0x80008020L, + 0x80000020L, 0x80108020L, 0x80108000L, 0x80000000L, + 0x80008000L, 0x00100000L, 0x00000020L, 0x80100020L, + 0x00108000L, 0x00100020L, 0x80008020L, 0x00000000L, + 0x80000000L, 0x00008000L, 0x00108020L, 0x80100000L, + 0x00100020L, 0x80000020L, 0x00000000L, 0x00108000L, + 0x00008020L, 0x80108000L, 0x80100000L, 0x00008020L, + 0x00000000L, 0x00108020L, 0x80100020L, 0x00100000L, + 0x80008020L, 0x80100000L, 0x80108000L, 0x00008000L, + 0x80100000L, 0x80008000L, 0x00000020L, 0x80108020L, + 0x00108020L, 0x00000020L, 0x00008000L, 0x80000000L, + 0x00008020L, 0x80108000L, 0x00100000L, 0x80000020L, + 0x00100020L, 0x80008020L, 0x80000020L, 0x00100020L, + 0x00108000L, 0x00000000L, 0x80008000L, 0x00008020L, + 0x80000000L, 0x80100020L, 0x80108020L, 0x00108000L }; + +static unsigned long SP3[64] = { + 0x00000208L, 0x08020200L, 0x00000000L, 0x08020008L, + 0x08000200L, 0x00000000L, 0x00020208L, 0x08000200L, + 0x00020008L, 0x08000008L, 0x08000008L, 0x00020000L, + 0x08020208L, 0x00020008L, 0x08020000L, 0x00000208L, + 0x08000000L, 0x00000008L, 0x08020200L, 0x00000200L, + 0x00020200L, 0x08020000L, 0x08020008L, 0x00020208L, + 0x08000208L, 0x00020200L, 0x00020000L, 0x08000208L, + 0x00000008L, 0x08020208L, 0x00000200L, 0x08000000L, + 0x08020200L, 0x08000000L, 0x00020008L, 0x00000208L, + 0x00020000L, 0x08020200L, 0x08000200L, 0x00000000L, + 0x00000200L, 0x00020008L, 0x08020208L, 0x08000200L, + 0x08000008L, 0x00000200L, 0x00000000L, 0x08020008L, + 0x08000208L, 0x00020000L, 0x08000000L, 0x08020208L, + 0x00000008L, 0x00020208L, 0x00020200L, 0x08000008L, + 0x08020000L, 0x08000208L, 0x00000208L, 0x08020000L, + 0x00020208L, 0x00000008L, 0x08020008L, 0x00020200L }; + +static unsigned long SP4[64] = { + 0x00802001L, 0x00002081L, 0x00002081L, 0x00000080L, + 0x00802080L, 0x00800081L, 0x00800001L, 0x00002001L, + 0x00000000L, 0x00802000L, 0x00802000L, 0x00802081L, + 0x00000081L, 0x00000000L, 0x00800080L, 0x00800001L, + 0x00000001L, 0x00002000L, 0x00800000L, 0x00802001L, + 0x00000080L, 0x00800000L, 0x00002001L, 0x00002080L, + 0x00800081L, 0x00000001L, 0x00002080L, 0x00800080L, + 0x00002000L, 0x00802080L, 0x00802081L, 0x00000081L, + 0x00800080L, 0x00800001L, 0x00802000L, 0x00802081L, + 0x00000081L, 0x00000000L, 0x00000000L, 0x00802000L, + 0x00002080L, 0x00800080L, 0x00800081L, 0x00000001L, + 0x00802001L, 0x00002081L, 0x00002081L, 0x00000080L, + 0x00802081L, 0x00000081L, 0x00000001L, 0x00002000L, + 0x00800001L, 0x00002001L, 0x00802080L, 0x00800081L, + 0x00002001L, 0x00002080L, 0x00800000L, 0x00802001L, + 0x00000080L, 0x00800000L, 0x00002000L, 0x00802080L }; + +static unsigned long SP5[64] = { + 0x00000100L, 0x02080100L, 0x02080000L, 0x42000100L, + 0x00080000L, 0x00000100L, 0x40000000L, 0x02080000L, + 0x40080100L, 0x00080000L, 0x02000100L, 0x40080100L, + 0x42000100L, 0x42080000L, 0x00080100L, 0x40000000L, + 0x02000000L, 0x40080000L, 0x40080000L, 0x00000000L, + 0x40000100L, 0x42080100L, 0x42080100L, 0x02000100L, + 0x42080000L, 0x40000100L, 0x00000000L, 0x42000000L, + 0x02080100L, 0x02000000L, 0x42000000L, 0x00080100L, + 0x00080000L, 0x42000100L, 0x00000100L, 0x02000000L, + 0x40000000L, 0x02080000L, 0x42000100L, 0x40080100L, + 0x02000100L, 0x40000000L, 0x42080000L, 0x02080100L, + 0x40080100L, 0x00000100L, 0x02000000L, 0x42080000L, + 0x42080100L, 0x00080100L, 0x42000000L, 0x42080100L, + 0x02080000L, 0x00000000L, 0x40080000L, 0x42000000L, + 0x00080100L, 0x02000100L, 0x40000100L, 0x00080000L, + 0x00000000L, 0x40080000L, 0x02080100L, 0x40000100L }; + +static unsigned long SP6[64] = { + 0x20000010L, 0x20400000L, 0x00004000L, 0x20404010L, + 0x20400000L, 0x00000010L, 0x20404010L, 0x00400000L, + 0x20004000L, 0x00404010L, 0x00400000L, 0x20000010L, + 0x00400010L, 0x20004000L, 0x20000000L, 0x00004010L, + 0x00000000L, 0x00400010L, 0x20004010L, 0x00004000L, + 0x00404000L, 0x20004010L, 0x00000010L, 0x20400010L, + 0x20400010L, 0x00000000L, 0x00404010L, 0x20404000L, + 0x00004010L, 0x00404000L, 0x20404000L, 0x20000000L, + 0x20004000L, 0x00000010L, 0x20400010L, 0x00404000L, + 0x20404010L, 0x00400000L, 0x00004010L, 0x20000010L, + 0x00400000L, 0x20004000L, 0x20000000L, 0x00004010L, + 0x20000010L, 0x20404010L, 0x00404000L, 0x20400000L, + 0x00404010L, 0x20404000L, 0x00000000L, 0x20400010L, + 0x00000010L, 0x00004000L, 0x20400000L, 0x00404010L, + 0x00004000L, 0x00400010L, 0x20004010L, 0x00000000L, + 0x20404000L, 0x20000000L, 0x00400010L, 0x20004010L }; + +static unsigned long SP7[64] = { + 0x00200000L, 0x04200002L, 0x04000802L, 0x00000000L, + 0x00000800L, 0x04000802L, 0x00200802L, 0x04200800L, + 0x04200802L, 0x00200000L, 0x00000000L, 0x04000002L, + 0x00000002L, 0x04000000L, 0x04200002L, 0x00000802L, + 0x04000800L, 0x00200802L, 0x00200002L, 0x04000800L, + 0x04000002L, 0x04200000L, 0x04200800L, 0x00200002L, + 0x04200000L, 0x00000800L, 0x00000802L, 0x04200802L, + 0x00200800L, 0x00000002L, 0x04000000L, 0x00200800L, + 0x04000000L, 0x00200800L, 0x00200000L, 0x04000802L, + 0x04000802L, 0x04200002L, 0x04200002L, 0x00000002L, + 0x00200002L, 0x04000000L, 0x04000800L, 0x00200000L, + 0x04200800L, 0x00000802L, 0x00200802L, 0x04200800L, + 0x00000802L, 0x04000002L, 0x04200802L, 0x04200000L, + 0x00200800L, 0x00000000L, 0x00000002L, 0x04200802L, + 0x00000000L, 0x00200802L, 0x04200000L, 0x00000800L, + 0x04000002L, 0x04000800L, 0x00000800L, 0x00200002L }; + +static unsigned long SP8[64] = { + 0x10001040L, 0x00001000L, 0x00040000L, 0x10041040L, + 0x10000000L, 0x10001040L, 0x00000040L, 0x10000000L, + 0x00040040L, 0x10040000L, 0x10041040L, 0x00041000L, + 0x10041000L, 0x00041040L, 0x00001000L, 0x00000040L, + 0x10040000L, 0x10000040L, 0x10001000L, 0x00001040L, + 0x00041000L, 0x00040040L, 0x10040040L, 0x10041000L, + 0x00001040L, 0x00000000L, 0x00000000L, 0x10040040L, + 0x10000040L, 0x10001000L, 0x00041040L, 0x00040000L, + 0x00041040L, 0x00040000L, 0x10041000L, 0x00001000L, + 0x00000040L, 0x10040040L, 0x00001000L, 0x00041040L, + 0x10001000L, 0x00000040L, 0x10000040L, 0x10040000L, + 0x10040040L, 0x10000000L, 0x00040000L, 0x10001040L, + 0x00000000L, 0x10041040L, 0x00040040L, 0x10000040L, + 0x10040000L, 0x10001000L, 0x10001040L, 0x00000000L, + 0x10041040L, 0x00041000L, 0x00041000L, 0x00001040L, + 0x00001040L, 0x00040040L, 0x10000000L, 0x10041000L }; + +static void desfunc(register unsigned long *block, + register unsigned long *keys) +{ + register unsigned long fval, work, right, leftt; + register int round; + + leftt = block[0]; + right = block[1]; + work = ((leftt >> 4) ^ right) & 0x0f0f0f0fL; + right ^= work; + leftt ^= (work << 4); + work = ((leftt >> 16) ^ right) & 0x0000ffffL; + right ^= work; + leftt ^= (work << 16); + work = ((right >> 2) ^ leftt) & 0x33333333L; + leftt ^= work; + right ^= (work << 2); + work = ((right >> 8) ^ leftt) & 0x00ff00ffL; + leftt ^= work; + right ^= (work << 8); + right = ((right << 1) | ((right >> 31) & 1L)) & 0xffffffffL; + work = (leftt ^ right) & 0xaaaaaaaaL; + leftt ^= work; + right ^= work; + leftt = ((leftt << 1) | ((leftt >> 31) & 1L)) & 0xffffffffL; + + for( round = 0; round < 8; round++ ) { + work = (right << 28) | (right >> 4); + work ^= *keys++; + fval = SP7[ work & 0x3fL]; + fval |= SP5[(work >> 8) & 0x3fL]; + fval |= SP3[(work >> 16) & 0x3fL]; + fval |= SP1[(work >> 24) & 0x3fL]; + work = right ^ *keys++; + fval |= SP8[ work & 0x3fL]; + fval |= SP6[(work >> 8) & 0x3fL]; + fval |= SP4[(work >> 16) & 0x3fL]; + fval |= SP2[(work >> 24) & 0x3fL]; + leftt ^= fval; + work = (leftt << 28) | (leftt >> 4); + work ^= *keys++; + fval = SP7[ work & 0x3fL]; + fval |= SP5[(work >> 8) & 0x3fL]; + fval |= SP3[(work >> 16) & 0x3fL]; + fval |= SP1[(work >> 24) & 0x3fL]; + work = leftt ^ *keys++; + fval |= SP8[ work & 0x3fL]; + fval |= SP6[(work >> 8) & 0x3fL]; + fval |= SP4[(work >> 16) & 0x3fL]; + fval |= SP2[(work >> 24) & 0x3fL]; + right ^= fval; + } + + right = (right << 31) | (right >> 1); + work = (leftt ^ right) & 0xaaaaaaaaL; + leftt ^= work; + right ^= work; + leftt = (leftt << 31) | (leftt >> 1); + work = ((leftt >> 8) ^ right) & 0x00ff00ffL; + right ^= work; + leftt ^= (work << 8); + work = ((leftt >> 2) ^ right) & 0x33333333L; + right ^= work; + leftt ^= (work << 2); + work = ((right >> 16) ^ leftt) & 0x0000ffffL; + leftt ^= work; + right ^= (work << 16); + work = ((right >> 4) ^ leftt) & 0x0f0f0f0fL; + leftt ^= work; + right ^= (work << 4); + *block++ = right; + *block = leftt; + return; + } + +/* Validation sets: + * + * Single-length key, single-length plaintext - + * Key : 0123 4567 89ab cdef + * Plain : 0123 4567 89ab cde7 + * Cipher : c957 4425 6a5e d31d + * + * Double-length key, single-length plaintext - + * Key : 0123 4567 89ab cdef fedc ba98 7654 3210 + * Plain : 0123 4567 89ab cde7 + * Cipher : 7f1d 0a77 826b 8aff + * + * Double-length key, double-length plaintext - + * Key : 0123 4567 89ab cdef fedc ba98 7654 3210 + * Plain : 0123 4567 89ab cdef 0123 4567 89ab cdff + * Cipher : 27a0 8440 406a df60 278f 47cf 42d6 15d7 + * + * Triple-length key, single-length plaintext - + * Key : 0123 4567 89ab cdef fedc ba98 7654 3210 89ab cdef 0123 4567 + * Plain : 0123 4567 89ab cde7 + * Cipher : de0b 7c06 ae5e 0ed5 + * + * Triple-length key, double-length plaintext - + * Key : 0123 4567 89ab cdef fedc ba98 7654 3210 89ab cdef 0123 4567 + * Plain : 0123 4567 89ab cdef 0123 4567 89ab cdff + * Cipher : ad0d 1b30 ac17 cf07 0ed1 1c63 81e4 4de5 + * + * d3des V5.0a rwo 9208.07 18:44 Graven Imagery + **********************************************************************/ diff --git a/jni/vnc/LibVNCServer-0.9.9/common/d3des.h b/jni/vnc/LibVNCServer-0.9.9/common/d3des.h new file mode 100644 index 0000000..e3761ca --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/d3des.h @@ -0,0 +1,56 @@ +#ifndef D3DES_H +#define D3DES_H + +/* + * This is D3DES (V5.09) by Richard Outerbridge with the double and + * triple-length support removed for use in VNC. + * + * These changes are: + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + */ + +/* d3des.h - + * + * Headers and defines for d3des.c + * Graven Imagery, 1992. + * + * Copyright (c) 1988,1989,1990,1991,1992 by Richard Outerbridge + * (GEnie : OUTER; CIS : [71755,204]) + */ + +#define EN0 0 /* MODE == encrypt */ +#define DE1 1 /* MODE == decrypt */ + +extern void rfbDesKey(unsigned char *, int); +/* hexkey[8] MODE + * Sets the internal key register according to the hexadecimal + * key contained in the 8 bytes of hexkey, according to the DES, + * for encryption or decryption according to MODE. + */ + +extern void rfbUseKey(unsigned long *); +/* cookedkey[32] + * Loads the internal key register with the data in cookedkey. + */ + +extern void rfbCPKey(unsigned long *); +/* cookedkey[32] + * Copies the contents of the internal key register into the storage + * located at &cookedkey[0]. + */ + +extern void rfbDes(unsigned char *, unsigned char *); +/* from[8] to[8] + * Encrypts/Decrypts (according to the key currently loaded in the + * internal key register) one block of eight bytes at address 'from' + * into the block at address 'to'. They can be the same. + */ + +/* d3des.h V5.09 rwo 9208.04 15:06 Graven Imagery + ********************************************************************/ + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/common/lzoconf.h b/jni/vnc/LibVNCServer-0.9.9/common/lzoconf.h new file mode 100644 index 0000000..d6125e8 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/lzoconf.h @@ -0,0 +1,419 @@ +/* lzoconf.h -- configuration for the LZO real-time data compression library + + This file is part of the LZO real-time data compression library. + + Copyright (C) 2010 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2009 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2008 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2007 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2006 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2005 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2004 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2003 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2002 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2001 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2000 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1999 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1998 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1997 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1996 Markus Franz Xaver Johannes Oberhumer + All Rights Reserved. + + The LZO library is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of + the License, or (at your option) any later version. + + The LZO library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with the LZO library; see the file COPYING. + If not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + Markus F.X.J. Oberhumer + + http://www.oberhumer.com/opensource/lzo/ + */ + + +#ifndef __LZOCONF_H_INCLUDED +#define __LZOCONF_H_INCLUDED 1 + +#define LZO_VERSION 0x2040 +#define LZO_VERSION_STRING "2.04" +#define LZO_VERSION_DATE "Oct 31 2010" + +/* internal Autoconf configuration file - only used when building LZO */ +#if defined(LZO_HAVE_CONFIG_H) +# include +#endif +#include +#include + + +/*********************************************************************** +// LZO requires a conforming +************************************************************************/ + +#if !defined(CHAR_BIT) || (CHAR_BIT != 8) +# error "invalid CHAR_BIT" +#endif +#if !defined(UCHAR_MAX) || !defined(UINT_MAX) || !defined(ULONG_MAX) +# error "check your compiler installation" +#endif +#if (USHRT_MAX < 1) || (UINT_MAX < 1) || (ULONG_MAX < 1) +# error "your limits.h macros are broken" +#endif + +/* get OS and architecture defines */ +#ifndef __LZODEFS_H_INCLUDED +#include "lzodefs.h" +#endif + + +#ifdef __cplusplus +extern "C" { +#endif + + +/*********************************************************************** +// some core defines +************************************************************************/ + +#if !defined(LZO_UINT32_C) +# if (UINT_MAX < LZO_0xffffffffL) +# define LZO_UINT32_C(c) c ## UL +# else +# define LZO_UINT32_C(c) ((c) + 0U) +# endif +#endif + +/* memory checkers */ +#if !defined(__LZO_CHECKER) +# if defined(__BOUNDS_CHECKING_ON) +# define __LZO_CHECKER 1 +# elif defined(__CHECKER__) +# define __LZO_CHECKER 1 +# elif defined(__INSURE__) +# define __LZO_CHECKER 1 +# elif defined(__PURIFY__) +# define __LZO_CHECKER 1 +# endif +#endif + + +/*********************************************************************** +// integral and pointer types +************************************************************************/ + +/* lzo_uint should match size_t */ +#if !defined(LZO_UINT_MAX) +# if defined(LZO_ABI_LLP64) /* WIN64 */ +# if defined(LZO_OS_WIN64) + typedef unsigned __int64 lzo_uint; + typedef __int64 lzo_int; +# else + typedef unsigned long long lzo_uint; + typedef long long lzo_int; +# endif +# define LZO_UINT_MAX 0xffffffffffffffffull +# define LZO_INT_MAX 9223372036854775807LL +# define LZO_INT_MIN (-1LL - LZO_INT_MAX) +# elif defined(LZO_ABI_IP32L64) /* MIPS R5900 */ + typedef unsigned int lzo_uint; + typedef int lzo_int; +# define LZO_UINT_MAX UINT_MAX +# define LZO_INT_MAX INT_MAX +# define LZO_INT_MIN INT_MIN +# elif (ULONG_MAX >= LZO_0xffffffffL) + typedef unsigned long lzo_uint; + typedef long lzo_int; +# define LZO_UINT_MAX ULONG_MAX +# define LZO_INT_MAX LONG_MAX +# define LZO_INT_MIN LONG_MIN +# else +# error "lzo_uint" +# endif +#endif + +/* Integral types with 32 bits or more. */ +#if !defined(LZO_UINT32_MAX) +# if (UINT_MAX >= LZO_0xffffffffL) + typedef unsigned int lzo_uint32; + typedef int lzo_int32; +# define LZO_UINT32_MAX UINT_MAX +# define LZO_INT32_MAX INT_MAX +# define LZO_INT32_MIN INT_MIN +# elif (ULONG_MAX >= LZO_0xffffffffL) + typedef unsigned long lzo_uint32; + typedef long lzo_int32; +# define LZO_UINT32_MAX ULONG_MAX +# define LZO_INT32_MAX LONG_MAX +# define LZO_INT32_MIN LONG_MIN +# else +# error "lzo_uint32" +# endif +#endif + +/* The larger type of lzo_uint and lzo_uint32. */ +#if (LZO_UINT_MAX >= LZO_UINT32_MAX) +# define lzo_xint lzo_uint +#else +# define lzo_xint lzo_uint32 +#endif + +/* Memory model that allows to access memory at offsets of lzo_uint. */ +#if !defined(__LZO_MMODEL) +# if (LZO_UINT_MAX <= UINT_MAX) +# define __LZO_MMODEL /*empty*/ +# elif defined(LZO_HAVE_MM_HUGE_PTR) +# define __LZO_MMODEL_HUGE 1 +# define __LZO_MMODEL __huge +# else +# define __LZO_MMODEL /*empty*/ +# endif +#endif + +/* no typedef here because of const-pointer issues */ +#define lzo_bytep unsigned char __LZO_MMODEL * +#define lzo_charp char __LZO_MMODEL * +#define lzo_voidp void __LZO_MMODEL * +#define lzo_shortp short __LZO_MMODEL * +#define lzo_ushortp unsigned short __LZO_MMODEL * +#define lzo_uint32p lzo_uint32 __LZO_MMODEL * +#define lzo_int32p lzo_int32 __LZO_MMODEL * +#define lzo_uintp lzo_uint __LZO_MMODEL * +#define lzo_intp lzo_int __LZO_MMODEL * +#define lzo_xintp lzo_xint __LZO_MMODEL * +#define lzo_voidpp lzo_voidp __LZO_MMODEL * +#define lzo_bytepp lzo_bytep __LZO_MMODEL * +/* deprecated - use 'lzo_bytep' instead of 'lzo_byte *' */ +#define lzo_byte unsigned char __LZO_MMODEL + +typedef int lzo_bool; + + +/*********************************************************************** +// function types +************************************************************************/ + +/* name mangling */ +#if !defined(__LZO_EXTERN_C) +# ifdef __cplusplus +# define __LZO_EXTERN_C extern "C" +# else +# define __LZO_EXTERN_C extern +# endif +#endif + +/* calling convention */ +#if !defined(__LZO_CDECL) +# define __LZO_CDECL __lzo_cdecl +#endif + +/* DLL export information */ +#if !defined(__LZO_EXPORT1) +# define __LZO_EXPORT1 /*empty*/ +#endif +#if !defined(__LZO_EXPORT2) +# define __LZO_EXPORT2 /*empty*/ +#endif + +/* __cdecl calling convention for public C and assembly functions */ +#if !defined(LZO_PUBLIC) +# define LZO_PUBLIC(_rettype) __LZO_EXPORT1 _rettype __LZO_EXPORT2 __LZO_CDECL +#endif +#if !defined(LZO_EXTERN) +# define LZO_EXTERN(_rettype) __LZO_EXTERN_C LZO_PUBLIC(_rettype) +#endif +#if !defined(LZO_PRIVATE) +# define LZO_PRIVATE(_rettype) static _rettype __LZO_CDECL +#endif + +/* function types */ +typedef int +(__LZO_CDECL *lzo_compress_t) ( const lzo_bytep src, lzo_uint src_len, + lzo_bytep dst, lzo_uintp dst_len, + lzo_voidp wrkmem ); + +typedef int +(__LZO_CDECL *lzo_decompress_t) ( const lzo_bytep src, lzo_uint src_len, + lzo_bytep dst, lzo_uintp dst_len, + lzo_voidp wrkmem ); + +typedef int +(__LZO_CDECL *lzo_optimize_t) ( lzo_bytep src, lzo_uint src_len, + lzo_bytep dst, lzo_uintp dst_len, + lzo_voidp wrkmem ); + +typedef int +(__LZO_CDECL *lzo_compress_dict_t)(const lzo_bytep src, lzo_uint src_len, + lzo_bytep dst, lzo_uintp dst_len, + lzo_voidp wrkmem, + const lzo_bytep dict, lzo_uint dict_len ); + +typedef int +(__LZO_CDECL *lzo_decompress_dict_t)(const lzo_bytep src, lzo_uint src_len, + lzo_bytep dst, lzo_uintp dst_len, + lzo_voidp wrkmem, + const lzo_bytep dict, lzo_uint dict_len ); + + +/* Callback interface. Currently only the progress indicator ("nprogress") + * is used, but this may change in a future release. */ + +struct lzo_callback_t; +typedef struct lzo_callback_t lzo_callback_t; +#define lzo_callback_p lzo_callback_t __LZO_MMODEL * + +/* malloc & free function types */ +typedef lzo_voidp (__LZO_CDECL *lzo_alloc_func_t) + (lzo_callback_p self, lzo_uint items, lzo_uint size); +typedef void (__LZO_CDECL *lzo_free_func_t) + (lzo_callback_p self, lzo_voidp ptr); + +/* a progress indicator callback function */ +typedef void (__LZO_CDECL *lzo_progress_func_t) + (lzo_callback_p, lzo_uint, lzo_uint, int); + +struct lzo_callback_t +{ + /* custom allocators (set to 0 to disable) */ + lzo_alloc_func_t nalloc; /* [not used right now] */ + lzo_free_func_t nfree; /* [not used right now] */ + + /* a progress indicator callback function (set to 0 to disable) */ + lzo_progress_func_t nprogress; + + /* NOTE: the first parameter "self" of the nalloc/nfree/nprogress + * callbacks points back to this struct, so you are free to store + * some extra info in the following variables. */ + lzo_voidp user1; + lzo_xint user2; + lzo_xint user3; +}; + + +/*********************************************************************** +// error codes and prototypes +************************************************************************/ + +/* Error codes for the compression/decompression functions. Negative + * values are errors, positive values will be used for special but + * normal events. + */ +#define LZO_E_OK 0 +#define LZO_E_ERROR (-1) +#define LZO_E_OUT_OF_MEMORY (-2) /* [not used right now] */ +#define LZO_E_NOT_COMPRESSIBLE (-3) /* [not used right now] */ +#define LZO_E_INPUT_OVERRUN (-4) +#define LZO_E_OUTPUT_OVERRUN (-5) +#define LZO_E_LOOKBEHIND_OVERRUN (-6) +#define LZO_E_EOF_NOT_FOUND (-7) +#define LZO_E_INPUT_NOT_CONSUMED (-8) +#define LZO_E_NOT_YET_IMPLEMENTED (-9) /* [not used right now] */ + + +#ifndef lzo_sizeof_dict_t +# define lzo_sizeof_dict_t ((unsigned)sizeof(lzo_bytep)) +#endif + +/* lzo_init() should be the first function you call. + * Check the return code ! + * + * lzo_init() is a macro to allow checking that the library and the + * compiler's view of various types are consistent. + */ +#define lzo_init() __lzo_init_v2(LZO_VERSION,(int)sizeof(short),(int)sizeof(int),\ + (int)sizeof(long),(int)sizeof(lzo_uint32),(int)sizeof(lzo_uint),\ + (int)lzo_sizeof_dict_t,(int)sizeof(char *),(int)sizeof(lzo_voidp),\ + (int)sizeof(lzo_callback_t)) +LZO_EXTERN(int) __lzo_init_v2(unsigned,int,int,int,int,int,int,int,int,int); + +/* version functions (useful for shared libraries) */ +LZO_EXTERN(unsigned) lzo_version(void); +LZO_EXTERN(const char *) lzo_version_string(void); +LZO_EXTERN(const char *) lzo_version_date(void); +LZO_EXTERN(const lzo_charp) _lzo_version_string(void); +LZO_EXTERN(const lzo_charp) _lzo_version_date(void); + +/* string functions */ +LZO_EXTERN(int) + lzo_memcmp(const lzo_voidp a, const lzo_voidp b, lzo_uint len); +LZO_EXTERN(lzo_voidp) + lzo_memcpy(lzo_voidp dst, const lzo_voidp src, lzo_uint len); +LZO_EXTERN(lzo_voidp) + lzo_memmove(lzo_voidp dst, const lzo_voidp src, lzo_uint len); +LZO_EXTERN(lzo_voidp) + lzo_memset(lzo_voidp buf, int c, lzo_uint len); + +/* checksum functions */ +LZO_EXTERN(lzo_uint32) + lzo_adler32(lzo_uint32 c, const lzo_bytep buf, lzo_uint len); +LZO_EXTERN(lzo_uint32) + lzo_crc32(lzo_uint32 c, const lzo_bytep buf, lzo_uint len); +LZO_EXTERN(const lzo_uint32p) + lzo_get_crc32_table(void); + +/* misc. */ +LZO_EXTERN(int) _lzo_config_check(void); +typedef union { lzo_bytep p; lzo_uint u; } __lzo_pu_u; +typedef union { lzo_bytep p; lzo_uint32 u32; } __lzo_pu32_u; +typedef union { void *vp; lzo_bytep bp; lzo_uint u; lzo_uint32 u32; unsigned long l; } lzo_align_t; + +/* align a char pointer on a boundary that is a multiple of 'size' */ +LZO_EXTERN(unsigned) __lzo_align_gap(const lzo_voidp p, lzo_uint size); +#define LZO_PTR_ALIGN_UP(p,size) \ + ((p) + (lzo_uint) __lzo_align_gap((const lzo_voidp)(p),(lzo_uint)(size))) + + +/*********************************************************************** +// deprecated macros - only for backward compatibility with LZO v1.xx +************************************************************************/ + +#if defined(LZO_CFG_COMPAT) + +#define __LZOCONF_H 1 + +#if defined(LZO_ARCH_I086) +# define __LZO_i386 1 +#elif defined(LZO_ARCH_I386) +# define __LZO_i386 1 +#endif + +#if defined(LZO_OS_DOS16) +# define __LZO_DOS 1 +# define __LZO_DOS16 1 +#elif defined(LZO_OS_DOS32) +# define __LZO_DOS 1 +#elif defined(LZO_OS_WIN16) +# define __LZO_WIN 1 +# define __LZO_WIN16 1 +#elif defined(LZO_OS_WIN32) +# define __LZO_WIN 1 +#endif + +#define __LZO_CMODEL /*empty*/ +#define __LZO_DMODEL /*empty*/ +#define __LZO_ENTRY __LZO_CDECL +#define LZO_EXTERN_CDECL LZO_EXTERN +#define LZO_ALIGN LZO_PTR_ALIGN_UP + +#define lzo_compress_asm_t lzo_compress_t +#define lzo_decompress_asm_t lzo_decompress_t + +#endif /* LZO_CFG_COMPAT */ + + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /* already included */ + + +/* vim:set ts=4 et: */ diff --git a/jni/vnc/LibVNCServer-0.9.9/common/lzodefs.h b/jni/vnc/LibVNCServer-0.9.9/common/lzodefs.h new file mode 100644 index 0000000..190013f --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/lzodefs.h @@ -0,0 +1,1851 @@ +/* lzodefs.h -- architecture, OS and compiler specific defines + + This file is part of the LZO real-time data compression library. + + Copyright (C) 2010 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2009 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2008 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2007 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2006 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2005 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2004 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2003 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2002 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2001 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2000 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1999 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1998 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1997 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1996 Markus Franz Xaver Johannes Oberhumer + All Rights Reserved. + + The LZO library is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of + the License, or (at your option) any later version. + + The LZO library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with the LZO library; see the file COPYING. + If not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + Markus F.X.J. Oberhumer + + http://www.oberhumer.com/opensource/lzo/ + */ + + +#ifndef __LZODEFS_H_INCLUDED +#define __LZODEFS_H_INCLUDED 1 + +#if defined(__CYGWIN32__) && !defined(__CYGWIN__) +# define __CYGWIN__ __CYGWIN32__ +#endif +#if defined(__IBMCPP__) && !defined(__IBMC__) +# define __IBMC__ __IBMCPP__ +#endif +#if defined(__ICL) && defined(_WIN32) && !defined(__INTEL_COMPILER) +# define __INTEL_COMPILER __ICL +#endif +#if 1 && defined(__INTERIX) && defined(__GNUC__) && !defined(_ALL_SOURCE) +# define _ALL_SOURCE 1 +#endif +#if defined(__mips__) && defined(__R5900__) +# if !defined(__LONG_MAX__) +# define __LONG_MAX__ 9223372036854775807L +# endif +#endif +#if defined(__INTEL_COMPILER) && defined(__linux__) +# pragma warning(disable: 193) +#endif +#if defined(__KEIL__) && defined(__C166__) +# pragma warning disable = 322 +#elif 0 && defined(__C251__) +# pragma warning disable = 322 +#endif +#if defined(_MSC_VER) && !defined(__INTEL_COMPILER) && !defined(__MWERKS__) +# if (_MSC_VER >= 1300) +# pragma warning(disable: 4668) +# endif +#endif +#if 0 && defined(__WATCOMC__) +# if (__WATCOMC__ >= 1050) && (__WATCOMC__ < 1060) +# pragma warning 203 9 +# endif +#endif +#if defined(__BORLANDC__) && defined(__MSDOS__) && !defined(__FLAT__) +# pragma option -h +#endif +#if 0 +#define LZO_0xffffL 0xfffful +#define LZO_0xffffffffL 0xfffffffful +#else +#define LZO_0xffffL 65535ul +#define LZO_0xffffffffL 4294967295ul +#endif +#if (LZO_0xffffL == LZO_0xffffffffL) +# error "your preprocessor is broken 1" +#endif +#if (16ul * 16384ul != 262144ul) +# error "your preprocessor is broken 2" +#endif +#if 0 +#if (32767 >= 4294967295ul) +# error "your preprocessor is broken 3" +#endif +#if (65535u >= 4294967295ul) +# error "your preprocessor is broken 4" +#endif +#endif +#if (UINT_MAX == LZO_0xffffL) +#if defined(__ZTC__) && defined(__I86__) && !defined(__OS2__) +# if !defined(MSDOS) +# define MSDOS 1 +# endif +# if !defined(_MSDOS) +# define _MSDOS 1 +# endif +#elif 0 && defined(__VERSION) && defined(MB_LEN_MAX) +# if (__VERSION == 520) && (MB_LEN_MAX == 1) +# if !defined(__AZTEC_C__) +# define __AZTEC_C__ __VERSION +# endif +# if !defined(__DOS__) +# define __DOS__ 1 +# endif +# endif +#endif +#endif +#if defined(_MSC_VER) && defined(M_I86HM) && (UINT_MAX == LZO_0xffffL) +# define ptrdiff_t long +# define _PTRDIFF_T_DEFINED 1 +#endif +#if (UINT_MAX == LZO_0xffffL) +# undef __LZO_RENAME_A +# undef __LZO_RENAME_B +# if defined(__AZTEC_C__) && defined(__DOS__) +# define __LZO_RENAME_A 1 +# elif defined(_MSC_VER) && defined(MSDOS) +# if (_MSC_VER < 600) +# define __LZO_RENAME_A 1 +# elif (_MSC_VER < 700) +# define __LZO_RENAME_B 1 +# endif +# elif defined(__TSC__) && defined(__OS2__) +# define __LZO_RENAME_A 1 +# elif defined(__MSDOS__) && defined(__TURBOC__) && (__TURBOC__ < 0x0410) +# define __LZO_RENAME_A 1 +# elif defined(__PACIFIC__) && defined(DOS) +# if !defined(__far) +# define __far far +# endif +# if !defined(__near) +# define __near near +# endif +# endif +# if defined(__LZO_RENAME_A) +# if !defined(__cdecl) +# define __cdecl cdecl +# endif +# if !defined(__far) +# define __far far +# endif +# if !defined(__huge) +# define __huge huge +# endif +# if !defined(__near) +# define __near near +# endif +# if !defined(__pascal) +# define __pascal pascal +# endif +# if !defined(__huge) +# define __huge huge +# endif +# elif defined(__LZO_RENAME_B) +# if !defined(__cdecl) +# define __cdecl _cdecl +# endif +# if !defined(__far) +# define __far _far +# endif +# if !defined(__huge) +# define __huge _huge +# endif +# if !defined(__near) +# define __near _near +# endif +# if !defined(__pascal) +# define __pascal _pascal +# endif +# elif (defined(__PUREC__) || defined(__TURBOC__)) && defined(__TOS__) +# if !defined(__cdecl) +# define __cdecl cdecl +# endif +# if !defined(__pascal) +# define __pascal pascal +# endif +# endif +# undef __LZO_RENAME_A +# undef __LZO_RENAME_B +#endif +#if (UINT_MAX == LZO_0xffffL) +#if defined(__AZTEC_C__) && defined(__DOS__) +# define LZO_BROKEN_CDECL_ALT_SYNTAX 1 +#elif defined(_MSC_VER) && defined(MSDOS) +# if (_MSC_VER < 600) +# define LZO_BROKEN_INTEGRAL_CONSTANTS 1 +# endif +# if (_MSC_VER < 700) +# define LZO_BROKEN_INTEGRAL_PROMOTION 1 +# define LZO_BROKEN_SIZEOF 1 +# endif +#elif defined(__PACIFIC__) && defined(DOS) +# define LZO_BROKEN_INTEGRAL_CONSTANTS 1 +#elif defined(__TURBOC__) && defined(__MSDOS__) +# if (__TURBOC__ < 0x0150) +# define LZO_BROKEN_CDECL_ALT_SYNTAX 1 +# define LZO_BROKEN_INTEGRAL_CONSTANTS 1 +# define LZO_BROKEN_INTEGRAL_PROMOTION 1 +# endif +# if (__TURBOC__ < 0x0200) +# define LZO_BROKEN_SIZEOF 1 +# endif +# if (__TURBOC__ < 0x0400) && defined(__cplusplus) +# define LZO_BROKEN_CDECL_ALT_SYNTAX 1 +# endif +#elif (defined(__PUREC__) || defined(__TURBOC__)) && defined(__TOS__) +# define LZO_BROKEN_CDECL_ALT_SYNTAX 1 +# define LZO_BROKEN_SIZEOF 1 +#endif +#endif +#if defined(__WATCOMC__) && (__WATCOMC__ < 900) +# define LZO_BROKEN_INTEGRAL_CONSTANTS 1 +#endif +#if defined(_CRAY) && defined(_CRAY1) +# define LZO_BROKEN_SIGNED_RIGHT_SHIFT 1 +#endif +#define LZO_PP_STRINGIZE(x) #x +#define LZO_PP_MACRO_EXPAND(x) LZO_PP_STRINGIZE(x) +#define LZO_PP_CONCAT2(a,b) a ## b +#define LZO_PP_CONCAT3(a,b,c) a ## b ## c +#define LZO_PP_CONCAT4(a,b,c,d) a ## b ## c ## d +#define LZO_PP_CONCAT5(a,b,c,d,e) a ## b ## c ## d ## e +#define LZO_PP_ECONCAT2(a,b) LZO_PP_CONCAT2(a,b) +#define LZO_PP_ECONCAT3(a,b,c) LZO_PP_CONCAT3(a,b,c) +#define LZO_PP_ECONCAT4(a,b,c,d) LZO_PP_CONCAT4(a,b,c,d) +#define LZO_PP_ECONCAT5(a,b,c,d,e) LZO_PP_CONCAT5(a,b,c,d,e) +#if 1 +#define LZO_CPP_STRINGIZE(x) #x +#define LZO_CPP_MACRO_EXPAND(x) LZO_CPP_STRINGIZE(x) +#define LZO_CPP_CONCAT2(a,b) a ## b +#define LZO_CPP_CONCAT3(a,b,c) a ## b ## c +#define LZO_CPP_CONCAT4(a,b,c,d) a ## b ## c ## d +#define LZO_CPP_CONCAT5(a,b,c,d,e) a ## b ## c ## d ## e +#define LZO_CPP_ECONCAT2(a,b) LZO_CPP_CONCAT2(a,b) +#define LZO_CPP_ECONCAT3(a,b,c) LZO_CPP_CONCAT3(a,b,c) +#define LZO_CPP_ECONCAT4(a,b,c,d) LZO_CPP_CONCAT4(a,b,c,d) +#define LZO_CPP_ECONCAT5(a,b,c,d,e) LZO_CPP_CONCAT5(a,b,c,d,e) +#endif +#define __LZO_MASK_GEN(o,b) (((((o) << ((b)-1)) - (o)) << 1) + (o)) +#if 1 && defined(__cplusplus) +# if !defined(__STDC_CONSTANT_MACROS) +# define __STDC_CONSTANT_MACROS 1 +# endif +# if !defined(__STDC_LIMIT_MACROS) +# define __STDC_LIMIT_MACROS 1 +# endif +#endif +#if defined(__cplusplus) +# define LZO_EXTERN_C extern "C" +#else +# define LZO_EXTERN_C extern +#endif +#if !defined(__LZO_OS_OVERRIDE) +#if (LZO_OS_FREESTANDING) +# define LZO_INFO_OS "freestanding" +#elif (LZO_OS_EMBEDDED) +# define LZO_INFO_OS "embedded" +#elif 1 && defined(__IAR_SYSTEMS_ICC__) +# define LZO_OS_EMBEDDED 1 +# define LZO_INFO_OS "embedded" +#elif defined(__CYGWIN__) && defined(__GNUC__) +# define LZO_OS_CYGWIN 1 +# define LZO_INFO_OS "cygwin" +#elif defined(__EMX__) && defined(__GNUC__) +# define LZO_OS_EMX 1 +# define LZO_INFO_OS "emx" +#elif defined(__BEOS__) +# define LZO_OS_BEOS 1 +# define LZO_INFO_OS "beos" +#elif defined(__Lynx__) +# define LZO_OS_LYNXOS 1 +# define LZO_INFO_OS "lynxos" +#elif defined(__OS400__) +# define LZO_OS_OS400 1 +# define LZO_INFO_OS "os400" +#elif defined(__QNX__) +# define LZO_OS_QNX 1 +# define LZO_INFO_OS "qnx" +#elif defined(__BORLANDC__) && defined(__DPMI32__) && (__BORLANDC__ >= 0x0460) +# define LZO_OS_DOS32 1 +# define LZO_INFO_OS "dos32" +#elif defined(__BORLANDC__) && defined(__DPMI16__) +# define LZO_OS_DOS16 1 +# define LZO_INFO_OS "dos16" +#elif defined(__ZTC__) && defined(DOS386) +# define LZO_OS_DOS32 1 +# define LZO_INFO_OS "dos32" +#elif defined(__OS2__) || defined(__OS2V2__) +# if (UINT_MAX == LZO_0xffffL) +# define LZO_OS_OS216 1 +# define LZO_INFO_OS "os216" +# elif (UINT_MAX == LZO_0xffffffffL) +# define LZO_OS_OS2 1 +# define LZO_INFO_OS "os2" +# else +# error "check your limits.h header" +# endif +#elif defined(__WIN64__) || defined(_WIN64) || defined(WIN64) +# define LZO_OS_WIN64 1 +# define LZO_INFO_OS "win64" +#elif defined(__WIN32__) || defined(_WIN32) || defined(WIN32) || defined(__WINDOWS_386__) +# define LZO_OS_WIN32 1 +# define LZO_INFO_OS "win32" +#elif defined(__MWERKS__) && defined(__INTEL__) +# define LZO_OS_WIN32 1 +# define LZO_INFO_OS "win32" +#elif defined(__WINDOWS__) || defined(_WINDOWS) || defined(_Windows) +# if (UINT_MAX == LZO_0xffffL) +# define LZO_OS_WIN16 1 +# define LZO_INFO_OS "win16" +# elif (UINT_MAX == LZO_0xffffffffL) +# define LZO_OS_WIN32 1 +# define LZO_INFO_OS "win32" +# else +# error "check your limits.h header" +# endif +#elif defined(__DOS__) || defined(__MSDOS__) || defined(_MSDOS) || defined(MSDOS) || (defined(__PACIFIC__) && defined(DOS)) +# if (UINT_MAX == LZO_0xffffL) +# define LZO_OS_DOS16 1 +# define LZO_INFO_OS "dos16" +# elif (UINT_MAX == LZO_0xffffffffL) +# define LZO_OS_DOS32 1 +# define LZO_INFO_OS "dos32" +# else +# error "check your limits.h header" +# endif +#elif defined(__WATCOMC__) +# if defined(__NT__) && (UINT_MAX == LZO_0xffffL) +# define LZO_OS_DOS16 1 +# define LZO_INFO_OS "dos16" +# elif defined(__NT__) && (__WATCOMC__ < 1100) +# define LZO_OS_WIN32 1 +# define LZO_INFO_OS "win32" +# elif defined(__linux__) || defined(__LINUX__) +# define LZO_OS_POSIX 1 +# define LZO_INFO_OS "posix" +# else +# error "please specify a target using the -bt compiler option" +# endif +#elif defined(__palmos__) +# define LZO_OS_PALMOS 1 +# define LZO_INFO_OS "palmos" +#elif defined(__TOS__) || defined(__atarist__) +# define LZO_OS_TOS 1 +# define LZO_INFO_OS "tos" +#elif defined(macintosh) && !defined(__ppc__) +# define LZO_OS_MACCLASSIC 1 +# define LZO_INFO_OS "macclassic" +#elif defined(__VMS) +# define LZO_OS_VMS 1 +# define LZO_INFO_OS "vms" +#elif ((defined(__mips__) && defined(__R5900__)) || defined(__MIPS_PSX2__)) +# define LZO_OS_CONSOLE 1 +# define LZO_OS_CONSOLE_PS2 1 +# define LZO_INFO_OS "console" +# define LZO_INFO_OS_CONSOLE "ps2" +#elif (defined(__mips__) && defined(__psp__)) +# define LZO_OS_CONSOLE 1 +# define LZO_OS_CONSOLE_PSP 1 +# define LZO_INFO_OS "console" +# define LZO_INFO_OS_CONSOLE "psp" +#else +# define LZO_OS_POSIX 1 +# define LZO_INFO_OS "posix" +#endif +#if (LZO_OS_POSIX) +# if defined(_AIX) || defined(__AIX__) || defined(__aix__) +# define LZO_OS_POSIX_AIX 1 +# define LZO_INFO_OS_POSIX "aix" +# elif defined(__FreeBSD__) +# define LZO_OS_POSIX_FREEBSD 1 +# define LZO_INFO_OS_POSIX "freebsd" +# elif defined(__hpux__) || defined(__hpux) +# define LZO_OS_POSIX_HPUX 1 +# define LZO_INFO_OS_POSIX "hpux" +# elif defined(__INTERIX) +# define LZO_OS_POSIX_INTERIX 1 +# define LZO_INFO_OS_POSIX "interix" +# elif defined(__IRIX__) || defined(__irix__) +# define LZO_OS_POSIX_IRIX 1 +# define LZO_INFO_OS_POSIX "irix" +# elif defined(__linux__) || defined(__linux) || defined(__LINUX__) +# define LZO_OS_POSIX_LINUX 1 +# define LZO_INFO_OS_POSIX "linux" +# elif defined(__APPLE__) || defined(__MACOS__) +# define LZO_OS_POSIX_MACOSX 1 +# define LZO_INFO_OS_POSIX "macosx" +# elif defined(__minix__) || defined(__minix) +# define LZO_OS_POSIX_MINIX 1 +# define LZO_INFO_OS_POSIX "minix" +# elif defined(__NetBSD__) +# define LZO_OS_POSIX_NETBSD 1 +# define LZO_INFO_OS_POSIX "netbsd" +# elif defined(__OpenBSD__) +# define LZO_OS_POSIX_OPENBSD 1 +# define LZO_INFO_OS_POSIX "openbsd" +# elif defined(__osf__) +# define LZO_OS_POSIX_OSF 1 +# define LZO_INFO_OS_POSIX "osf" +# elif defined(__solaris__) || defined(__sun) +# if defined(__SVR4) || defined(__svr4__) +# define LZO_OS_POSIX_SOLARIS 1 +# define LZO_INFO_OS_POSIX "solaris" +# else +# define LZO_OS_POSIX_SUNOS 1 +# define LZO_INFO_OS_POSIX "sunos" +# endif +# elif defined(__ultrix__) || defined(__ultrix) +# define LZO_OS_POSIX_ULTRIX 1 +# define LZO_INFO_OS_POSIX "ultrix" +# elif defined(_UNICOS) +# define LZO_OS_POSIX_UNICOS 1 +# define LZO_INFO_OS_POSIX "unicos" +# else +# define LZO_OS_POSIX_UNKNOWN 1 +# define LZO_INFO_OS_POSIX "unknown" +# endif +#endif +#endif +#if (LZO_OS_DOS16 || LZO_OS_OS216 || LZO_OS_WIN16) +# if (UINT_MAX != LZO_0xffffL) +# error "this should not happen" +# endif +# if (ULONG_MAX != LZO_0xffffffffL) +# error "this should not happen" +# endif +#endif +#if (LZO_OS_DOS32 || LZO_OS_OS2 || LZO_OS_WIN32 || LZO_OS_WIN64) +# if (UINT_MAX != LZO_0xffffffffL) +# error "this should not happen" +# endif +# if (ULONG_MAX != LZO_0xffffffffL) +# error "this should not happen" +# endif +#endif +#if defined(CIL) && defined(_GNUCC) && defined(__GNUC__) +# define LZO_CC_CILLY 1 +# define LZO_INFO_CC "Cilly" +# if defined(__CILLY__) +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__CILLY__) +# else +# define LZO_INFO_CCVER "unknown" +# endif +#elif 0 && defined(SDCC) && defined(__VERSION__) && !defined(__GNUC__) +# define LZO_CC_SDCC 1 +# define LZO_INFO_CC "sdcc" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(SDCC) +#elif defined(__PATHSCALE__) && defined(__PATHCC_PATCHLEVEL__) +# define LZO_CC_PATHSCALE (__PATHCC__ * 0x10000L + __PATHCC_MINOR__ * 0x100 + __PATHCC_PATCHLEVEL__) +# define LZO_INFO_CC "Pathscale C" +# define LZO_INFO_CCVER __PATHSCALE__ +#elif defined(__INTEL_COMPILER) +# define LZO_CC_INTELC 1 +# define LZO_INFO_CC "Intel C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__INTEL_COMPILER) +# if defined(_WIN32) || defined(_WIN64) +# define LZO_CC_SYNTAX_MSC 1 +# else +# define LZO_CC_SYNTAX_GNUC 1 +# endif +#elif defined(__POCC__) && defined(_WIN32) +# define LZO_CC_PELLESC 1 +# define LZO_INFO_CC "Pelles C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__POCC__) +#elif defined(__clang__) && defined(__llvm__) && defined(__GNUC__) && defined(__GNUC_MINOR__) && defined(__VERSION__) +# if defined(__GNUC_PATCHLEVEL__) +# define LZO_CC_CLANG_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100 + __GNUC_PATCHLEVEL__) +# else +# define LZO_CC_CLANG_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100) +# endif +# if defined(__clang_major__) && defined(__clang_minor__) && defined(__clang_patchlevel__) +# define LZO_CC_CLANG_CLANG (__clang_major__ * 0x10000L + __clang_minor__ * 0x100 + __clang_patchlevel__) +# else +# define LZO_CC_CLANG_CLANG 0x020700L +# endif +# define LZO_CC_CLANG LZO_CC_CLANG_GNUC +# define LZO_INFO_CC "clang" +# define LZO_INFO_CCVER __VERSION__ +#elif defined(__llvm__) && defined(__GNUC__) && defined(__GNUC_MINOR__) && defined(__VERSION__) +# if defined(__GNUC_PATCHLEVEL__) +# define LZO_CC_LLVM_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100 + __GNUC_PATCHLEVEL__) +# else +# define LZO_CC_LLVM_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100) +# endif +# define LZO_CC_LLVM LZO_CC_LLVM_GNUC +# define LZO_INFO_CC "llvm-gcc" +# define LZO_INFO_CCVER __VERSION__ +#elif defined(__GNUC__) && defined(__VERSION__) +# if defined(__GNUC_MINOR__) && defined(__GNUC_PATCHLEVEL__) +# define LZO_CC_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100 + __GNUC_PATCHLEVEL__) +# elif defined(__GNUC_MINOR__) +# define LZO_CC_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100) +# else +# define LZO_CC_GNUC (__GNUC__ * 0x10000L) +# endif +# define LZO_INFO_CC "gcc" +# define LZO_INFO_CCVER __VERSION__ +#elif defined(__ACK__) && defined(_ACK) +# define LZO_CC_ACK 1 +# define LZO_INFO_CC "Amsterdam Compiler Kit C" +# define LZO_INFO_CCVER "unknown" +#elif defined(__AZTEC_C__) +# define LZO_CC_AZTECC 1 +# define LZO_INFO_CC "Aztec C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__AZTEC_C__) +#elif defined(__CODEGEARC__) +# define LZO_CC_CODEGEARC 1 +# define LZO_INFO_CC "CodeGear C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__CODEGEARC__) +#elif defined(__BORLANDC__) +# define LZO_CC_BORLANDC 1 +# define LZO_INFO_CC "Borland C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__BORLANDC__) +#elif defined(_CRAYC) && defined(_RELEASE) +# define LZO_CC_CRAYC 1 +# define LZO_INFO_CC "Cray C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(_RELEASE) +#elif defined(__DMC__) && defined(__SC__) +# define LZO_CC_DMC 1 +# define LZO_INFO_CC "Digital Mars C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__DMC__) +#elif defined(__DECC) +# define LZO_CC_DECC 1 +# define LZO_INFO_CC "DEC C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__DECC) +#elif defined(__HIGHC__) +# define LZO_CC_HIGHC 1 +# define LZO_INFO_CC "MetaWare High C" +# define LZO_INFO_CCVER "unknown" +#elif defined(__IAR_SYSTEMS_ICC__) +# define LZO_CC_IARC 1 +# define LZO_INFO_CC "IAR C" +# if defined(__VER__) +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__VER__) +# else +# define LZO_INFO_CCVER "unknown" +# endif +#elif defined(__IBMC__) +# define LZO_CC_IBMC 1 +# define LZO_INFO_CC "IBM C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__IBMC__) +#elif defined(__KEIL__) && defined(__C166__) +# define LZO_CC_KEILC 1 +# define LZO_INFO_CC "Keil C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__C166__) +#elif defined(__LCC__) && defined(_WIN32) && defined(__LCCOPTIMLEVEL) +# define LZO_CC_LCCWIN32 1 +# define LZO_INFO_CC "lcc-win32" +# define LZO_INFO_CCVER "unknown" +#elif defined(__LCC__) +# define LZO_CC_LCC 1 +# define LZO_INFO_CC "lcc" +# if defined(__LCC_VERSION__) +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__LCC_VERSION__) +# else +# define LZO_INFO_CCVER "unknown" +# endif +#elif defined(_MSC_VER) +# define LZO_CC_MSC 1 +# define LZO_INFO_CC "Microsoft C" +# if defined(_MSC_FULL_VER) +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(_MSC_VER) "." LZO_PP_MACRO_EXPAND(_MSC_FULL_VER) +# else +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(_MSC_VER) +# endif +#elif defined(__MWERKS__) +# define LZO_CC_MWERKS 1 +# define LZO_INFO_CC "Metrowerks C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__MWERKS__) +#elif (defined(__NDPC__) || defined(__NDPX__)) && defined(__i386) +# define LZO_CC_NDPC 1 +# define LZO_INFO_CC "Microway NDP C" +# define LZO_INFO_CCVER "unknown" +#elif defined(__PACIFIC__) +# define LZO_CC_PACIFICC 1 +# define LZO_INFO_CC "Pacific C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__PACIFIC__) +#elif defined(__PGI) && (defined(__linux__) || defined(__WIN32__)) +# define LZO_CC_PGI 1 +# define LZO_INFO_CC "Portland Group PGI C" +# define LZO_INFO_CCVER "unknown" +#elif defined(__PUREC__) && defined(__TOS__) +# define LZO_CC_PUREC 1 +# define LZO_INFO_CC "Pure C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__PUREC__) +#elif defined(__SC__) && defined(__ZTC__) +# define LZO_CC_SYMANTECC 1 +# define LZO_INFO_CC "Symantec C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__SC__) +#elif defined(__SUNPRO_C) +# define LZO_INFO_CC "SunPro C" +# if ((__SUNPRO_C)+0 > 0) +# define LZO_CC_SUNPROC __SUNPRO_C +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__SUNPRO_C) +# else +# define LZO_CC_SUNPROC 1 +# define LZO_INFO_CCVER "unknown" +# endif +#elif defined(__SUNPRO_CC) +# define LZO_INFO_CC "SunPro C" +# if ((__SUNPRO_CC)+0 > 0) +# define LZO_CC_SUNPROC __SUNPRO_CC +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__SUNPRO_CC) +# else +# define LZO_CC_SUNPROC 1 +# define LZO_INFO_CCVER "unknown" +# endif +#elif defined(__TINYC__) +# define LZO_CC_TINYC 1 +# define LZO_INFO_CC "Tiny C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__TINYC__) +#elif defined(__TSC__) +# define LZO_CC_TOPSPEEDC 1 +# define LZO_INFO_CC "TopSpeed C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__TSC__) +#elif defined(__WATCOMC__) +# define LZO_CC_WATCOMC 1 +# define LZO_INFO_CC "Watcom C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__WATCOMC__) +#elif defined(__TURBOC__) +# define LZO_CC_TURBOC 1 +# define LZO_INFO_CC "Turbo C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__TURBOC__) +#elif defined(__ZTC__) +# define LZO_CC_ZORTECHC 1 +# define LZO_INFO_CC "Zortech C" +# if (__ZTC__ == 0x310) +# define LZO_INFO_CCVER "0x310" +# else +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__ZTC__) +# endif +#else +# define LZO_CC_UNKNOWN 1 +# define LZO_INFO_CC "unknown" +# define LZO_INFO_CCVER "unknown" +#endif +#if 0 && (LZO_CC_MSC && (_MSC_VER >= 1200)) && !defined(_MSC_FULL_VER) +# error "LZO_CC_MSC: _MSC_FULL_VER is not defined" +#endif +#if !defined(__LZO_ARCH_OVERRIDE) && !(LZO_ARCH_GENERIC) && defined(_CRAY) +# if (UINT_MAX > LZO_0xffffffffL) && defined(_CRAY) +# if defined(_CRAYMPP) || defined(_CRAYT3D) || defined(_CRAYT3E) +# define LZO_ARCH_CRAY_MPP 1 +# elif defined(_CRAY1) +# define LZO_ARCH_CRAY_PVP 1 +# endif +# endif +#endif +#if !defined(__LZO_ARCH_OVERRIDE) +#if (LZO_ARCH_GENERIC) +# define LZO_INFO_ARCH "generic" +#elif (LZO_OS_DOS16 || LZO_OS_OS216 || LZO_OS_WIN16) +# define LZO_ARCH_I086 1 +# define LZO_ARCH_IA16 1 +# define LZO_INFO_ARCH "i086" +#elif defined(__alpha__) || defined(__alpha) || defined(_M_ALPHA) +# define LZO_ARCH_ALPHA 1 +# define LZO_INFO_ARCH "alpha" +#elif (LZO_ARCH_CRAY_MPP) && (defined(_CRAYT3D) || defined(_CRAYT3E)) +# define LZO_ARCH_ALPHA 1 +# define LZO_INFO_ARCH "alpha" +#elif defined(__amd64__) || defined(__x86_64__) || defined(_M_AMD64) +# define LZO_ARCH_AMD64 1 +# define LZO_INFO_ARCH "amd64" +#elif defined(__thumb__) || (defined(_M_ARM) && defined(_M_THUMB)) +# define LZO_ARCH_ARM 1 +# define LZO_ARCH_ARM_THUMB 1 +# define LZO_INFO_ARCH "arm_thumb" +#elif defined(__IAR_SYSTEMS_ICC__) && defined(__ICCARM__) +# define LZO_ARCH_ARM 1 +# if defined(__CPU_MODE__) && ((__CPU_MODE__)+0 == 1) +# define LZO_ARCH_ARM_THUMB 1 +# define LZO_INFO_ARCH "arm_thumb" +# elif defined(__CPU_MODE__) && ((__CPU_MODE__)+0 == 2) +# define LZO_INFO_ARCH "arm" +# else +# define LZO_INFO_ARCH "arm" +# endif +#elif defined(__arm__) || defined(_M_ARM) +# define LZO_ARCH_ARM 1 +# define LZO_INFO_ARCH "arm" +#elif (UINT_MAX <= LZO_0xffffL) && defined(__AVR__) +# define LZO_ARCH_AVR 1 +# define LZO_INFO_ARCH "avr" +#elif defined(__avr32__) || defined(__AVR32__) +# define LZO_ARCH_AVR32 1 +# define LZO_INFO_ARCH "avr32" +#elif defined(__bfin__) +# define LZO_ARCH_BLACKFIN 1 +# define LZO_INFO_ARCH "blackfin" +#elif (UINT_MAX == LZO_0xffffL) && defined(__C166__) +# define LZO_ARCH_C166 1 +# define LZO_INFO_ARCH "c166" +#elif defined(__cris__) +# define LZO_ARCH_CRIS 1 +# define LZO_INFO_ARCH "cris" +#elif defined(__IAR_SYSTEMS_ICC__) && defined(__ICCEZ80__) +# define LZO_ARCH_EZ80 1 +# define LZO_INFO_ARCH "ez80" +#elif defined(__H8300__) || defined(__H8300H__) || defined(__H8300S__) || defined(__H8300SX__) +# define LZO_ARCH_H8300 1 +# define LZO_INFO_ARCH "h8300" +#elif defined(__hppa__) || defined(__hppa) +# define LZO_ARCH_HPPA 1 +# define LZO_INFO_ARCH "hppa" +#elif defined(__386__) || defined(__i386__) || defined(__i386) || defined(_M_IX86) || defined(_M_I386) +# define LZO_ARCH_I386 1 +# define LZO_ARCH_IA32 1 +# define LZO_INFO_ARCH "i386" +#elif (LZO_CC_ZORTECHC && defined(__I86__)) +# define LZO_ARCH_I386 1 +# define LZO_ARCH_IA32 1 +# define LZO_INFO_ARCH "i386" +#elif (LZO_OS_DOS32 && LZO_CC_HIGHC) && defined(_I386) +# define LZO_ARCH_I386 1 +# define LZO_ARCH_IA32 1 +# define LZO_INFO_ARCH "i386" +#elif defined(__ia64__) || defined(__ia64) || defined(_M_IA64) +# define LZO_ARCH_IA64 1 +# define LZO_INFO_ARCH "ia64" +#elif (UINT_MAX == LZO_0xffffL) && defined(__m32c__) +# define LZO_ARCH_M16C 1 +# define LZO_INFO_ARCH "m16c" +#elif defined(__IAR_SYSTEMS_ICC__) && defined(__ICCM16C__) +# define LZO_ARCH_M16C 1 +# define LZO_INFO_ARCH "m16c" +#elif defined(__m32r__) +# define LZO_ARCH_M32R 1 +# define LZO_INFO_ARCH "m32r" +#elif (LZO_OS_TOS) || defined(__m68k__) || defined(__m68000__) || defined(__mc68000__) || defined(__mc68020__) || defined(_M_M68K) +# define LZO_ARCH_M68K 1 +# define LZO_INFO_ARCH "m68k" +#elif (UINT_MAX == LZO_0xffffL) && defined(__C251__) +# define LZO_ARCH_MCS251 1 +# define LZO_INFO_ARCH "mcs251" +#elif (UINT_MAX == LZO_0xffffL) && defined(__C51__) +# define LZO_ARCH_MCS51 1 +# define LZO_INFO_ARCH "mcs51" +#elif defined(__IAR_SYSTEMS_ICC__) && defined(__ICC8051__) +# define LZO_ARCH_MCS51 1 +# define LZO_INFO_ARCH "mcs51" +#elif defined(__mips__) || defined(__mips) || defined(_MIPS_ARCH) || defined(_M_MRX000) +# define LZO_ARCH_MIPS 1 +# define LZO_INFO_ARCH "mips" +#elif (UINT_MAX == LZO_0xffffL) && defined(__MSP430__) +# define LZO_ARCH_MSP430 1 +# define LZO_INFO_ARCH "msp430" +#elif defined(__IAR_SYSTEMS_ICC__) && defined(__ICC430__) +# define LZO_ARCH_MSP430 1 +# define LZO_INFO_ARCH "msp430" +#elif defined(__powerpc__) || defined(__powerpc) || defined(__ppc__) || defined(__PPC__) || defined(_M_PPC) || defined(_ARCH_PPC) || defined(_ARCH_PWR) +# define LZO_ARCH_POWERPC 1 +# define LZO_INFO_ARCH "powerpc" +#elif defined(__s390__) || defined(__s390) || defined(__s390x__) || defined(__s390x) +# define LZO_ARCH_S390 1 +# define LZO_INFO_ARCH "s390" +#elif defined(__sh__) || defined(_M_SH) +# define LZO_ARCH_SH 1 +# define LZO_INFO_ARCH "sh" +#elif defined(__sparc__) || defined(__sparc) || defined(__sparcv8) +# define LZO_ARCH_SPARC 1 +# define LZO_INFO_ARCH "sparc" +#elif defined(__SPU__) +# define LZO_ARCH_SPU 1 +# define LZO_INFO_ARCH "spu" +#elif (UINT_MAX == LZO_0xffffL) && defined(__z80) +# define LZO_ARCH_Z80 1 +# define LZO_INFO_ARCH "z80" +#elif (LZO_ARCH_CRAY_PVP) +# if defined(_CRAYSV1) +# define LZO_ARCH_CRAY_SV1 1 +# define LZO_INFO_ARCH "cray_sv1" +# elif (_ADDR64) +# define LZO_ARCH_CRAY_T90 1 +# define LZO_INFO_ARCH "cray_t90" +# elif (_ADDR32) +# define LZO_ARCH_CRAY_YMP 1 +# define LZO_INFO_ARCH "cray_ymp" +# else +# define LZO_ARCH_CRAY_XMP 1 +# define LZO_INFO_ARCH "cray_xmp" +# endif +#else +# define LZO_ARCH_UNKNOWN 1 +# define LZO_INFO_ARCH "unknown" +#endif +#endif +#if 1 && (LZO_ARCH_UNKNOWN) && (LZO_OS_DOS32 || LZO_OS_OS2) +# error "FIXME - missing define for CPU architecture" +#endif +#if 1 && (LZO_ARCH_UNKNOWN) && (LZO_OS_WIN32) +# error "FIXME - missing WIN32 define for CPU architecture" +#endif +#if 1 && (LZO_ARCH_UNKNOWN) && (LZO_OS_WIN64) +# error "FIXME - missing WIN64 define for CPU architecture" +#endif +#if (LZO_OS_OS216 || LZO_OS_WIN16) +# define LZO_ARCH_I086PM 1 +# define LZO_ARCH_IA16PM 1 +#elif 1 && (LZO_OS_DOS16 && defined(BLX286)) +# define LZO_ARCH_I086PM 1 +# define LZO_ARCH_IA16PM 1 +#elif 1 && (LZO_OS_DOS16 && defined(DOSX286)) +# define LZO_ARCH_I086PM 1 +# define LZO_ARCH_IA16PM 1 +#elif 1 && (LZO_OS_DOS16 && LZO_CC_BORLANDC && defined(__DPMI16__)) +# define LZO_ARCH_I086PM 1 +# define LZO_ARCH_IA16PM 1 +#endif +#if (LZO_ARCH_ARM_THUMB) && !(LZO_ARCH_ARM) +# error "this should not happen" +#endif +#if (LZO_ARCH_I086PM) && !(LZO_ARCH_I086) +# error "this should not happen" +#endif +#if (LZO_ARCH_I086) +# if (UINT_MAX != LZO_0xffffL) +# error "this should not happen" +# endif +# if (ULONG_MAX != LZO_0xffffffffL) +# error "this should not happen" +# endif +#endif +#if (LZO_ARCH_I386) +# if (UINT_MAX != LZO_0xffffL) && defined(__i386_int16__) +# error "this should not happen" +# endif +# if (UINT_MAX != LZO_0xffffffffL) && !defined(__i386_int16__) +# error "this should not happen" +# endif +# if (ULONG_MAX != LZO_0xffffffffL) +# error "this should not happen" +# endif +#endif +#if !defined(__LZO_MM_OVERRIDE) +#if (LZO_ARCH_I086) +#if (UINT_MAX != LZO_0xffffL) +# error "this should not happen" +#endif +#if defined(__TINY__) || defined(M_I86TM) || defined(_M_I86TM) +# define LZO_MM_TINY 1 +#elif defined(__HUGE__) || defined(_HUGE_) || defined(M_I86HM) || defined(_M_I86HM) +# define LZO_MM_HUGE 1 +#elif defined(__SMALL__) || defined(M_I86SM) || defined(_M_I86SM) || defined(SMALL_MODEL) +# define LZO_MM_SMALL 1 +#elif defined(__MEDIUM__) || defined(M_I86MM) || defined(_M_I86MM) +# define LZO_MM_MEDIUM 1 +#elif defined(__COMPACT__) || defined(M_I86CM) || defined(_M_I86CM) +# define LZO_MM_COMPACT 1 +#elif defined(__LARGE__) || defined(M_I86LM) || defined(_M_I86LM) || defined(LARGE_MODEL) +# define LZO_MM_LARGE 1 +#elif (LZO_CC_AZTECC) +# if defined(_LARGE_CODE) && defined(_LARGE_DATA) +# define LZO_MM_LARGE 1 +# elif defined(_LARGE_CODE) +# define LZO_MM_MEDIUM 1 +# elif defined(_LARGE_DATA) +# define LZO_MM_COMPACT 1 +# else +# define LZO_MM_SMALL 1 +# endif +#elif (LZO_CC_ZORTECHC && defined(__VCM__)) +# define LZO_MM_LARGE 1 +#else +# error "unknown memory model" +#endif +#if (LZO_OS_DOS16 || LZO_OS_OS216 || LZO_OS_WIN16) +#define LZO_HAVE_MM_HUGE_PTR 1 +#define LZO_HAVE_MM_HUGE_ARRAY 1 +#if (LZO_MM_TINY) +# undef LZO_HAVE_MM_HUGE_ARRAY +#endif +#if (LZO_CC_AZTECC || LZO_CC_PACIFICC || LZO_CC_ZORTECHC) +# undef LZO_HAVE_MM_HUGE_PTR +# undef LZO_HAVE_MM_HUGE_ARRAY +#elif (LZO_CC_DMC || LZO_CC_SYMANTECC) +# undef LZO_HAVE_MM_HUGE_ARRAY +#elif (LZO_CC_MSC && defined(_QC)) +# undef LZO_HAVE_MM_HUGE_ARRAY +# if (_MSC_VER < 600) +# undef LZO_HAVE_MM_HUGE_PTR +# endif +#elif (LZO_CC_TURBOC && (__TURBOC__ < 0x0295)) +# undef LZO_HAVE_MM_HUGE_ARRAY +#endif +#if (LZO_ARCH_I086PM) && !(LZO_HAVE_MM_HUGE_PTR) +# if (LZO_OS_DOS16) +# error "this should not happen" +# elif (LZO_CC_ZORTECHC) +# else +# error "this should not happen" +# endif +#endif +#ifdef __cplusplus +extern "C" { +#endif +#if (LZO_CC_BORLANDC && (__BORLANDC__ >= 0x0200)) + extern void __near __cdecl _AHSHIFT(void); +# define LZO_MM_AHSHIFT ((unsigned) _AHSHIFT) +#elif (LZO_CC_DMC || LZO_CC_SYMANTECC || LZO_CC_ZORTECHC) + extern void __near __cdecl _AHSHIFT(void); +# define LZO_MM_AHSHIFT ((unsigned) _AHSHIFT) +#elif (LZO_CC_MSC || LZO_CC_TOPSPEEDC) + extern void __near __cdecl _AHSHIFT(void); +# define LZO_MM_AHSHIFT ((unsigned) _AHSHIFT) +#elif (LZO_CC_TURBOC && (__TURBOC__ >= 0x0295)) + extern void __near __cdecl _AHSHIFT(void); +# define LZO_MM_AHSHIFT ((unsigned) _AHSHIFT) +#elif ((LZO_CC_AZTECC || LZO_CC_PACIFICC || LZO_CC_TURBOC) && LZO_OS_DOS16) +# define LZO_MM_AHSHIFT 12 +#elif (LZO_CC_WATCOMC) + extern unsigned char _HShift; +# define LZO_MM_AHSHIFT ((unsigned) _HShift) +#else +# error "FIXME - implement LZO_MM_AHSHIFT" +#endif +#ifdef __cplusplus +} +#endif +#endif +#elif (LZO_ARCH_C166) +#if !defined(__MODEL__) +# error "FIXME - C166 __MODEL__" +#elif ((__MODEL__) == 0) +# define LZO_MM_SMALL 1 +#elif ((__MODEL__) == 1) +# define LZO_MM_SMALL 1 +#elif ((__MODEL__) == 2) +# define LZO_MM_LARGE 1 +#elif ((__MODEL__) == 3) +# define LZO_MM_TINY 1 +#elif ((__MODEL__) == 4) +# define LZO_MM_XTINY 1 +#elif ((__MODEL__) == 5) +# define LZO_MM_XSMALL 1 +#else +# error "FIXME - C166 __MODEL__" +#endif +#elif (LZO_ARCH_MCS251) +#if !defined(__MODEL__) +# error "FIXME - MCS251 __MODEL__" +#elif ((__MODEL__) == 0) +# define LZO_MM_SMALL 1 +#elif ((__MODEL__) == 2) +# define LZO_MM_LARGE 1 +#elif ((__MODEL__) == 3) +# define LZO_MM_TINY 1 +#elif ((__MODEL__) == 4) +# define LZO_MM_XTINY 1 +#elif ((__MODEL__) == 5) +# define LZO_MM_XSMALL 1 +#else +# error "FIXME - MCS251 __MODEL__" +#endif +#elif (LZO_ARCH_MCS51) +#if !defined(__MODEL__) +# error "FIXME - MCS51 __MODEL__" +#elif ((__MODEL__) == 1) +# define LZO_MM_SMALL 1 +#elif ((__MODEL__) == 2) +# define LZO_MM_LARGE 1 +#elif ((__MODEL__) == 3) +# define LZO_MM_TINY 1 +#elif ((__MODEL__) == 4) +# define LZO_MM_XTINY 1 +#elif ((__MODEL__) == 5) +# define LZO_MM_XSMALL 1 +#else +# error "FIXME - MCS51 __MODEL__" +#endif +#elif (LZO_ARCH_CRAY_PVP) +# define LZO_MM_PVP 1 +#else +# define LZO_MM_FLAT 1 +#endif +#if (LZO_MM_COMPACT) +# define LZO_INFO_MM "compact" +#elif (LZO_MM_FLAT) +# define LZO_INFO_MM "flat" +#elif (LZO_MM_HUGE) +# define LZO_INFO_MM "huge" +#elif (LZO_MM_LARGE) +# define LZO_INFO_MM "large" +#elif (LZO_MM_MEDIUM) +# define LZO_INFO_MM "medium" +#elif (LZO_MM_PVP) +# define LZO_INFO_MM "pvp" +#elif (LZO_MM_SMALL) +# define LZO_INFO_MM "small" +#elif (LZO_MM_TINY) +# define LZO_INFO_MM "tiny" +#else +# error "unknown memory model" +#endif +#endif +#if defined(SIZEOF_SHORT) +# define LZO_SIZEOF_SHORT (SIZEOF_SHORT) +#endif +#if defined(SIZEOF_INT) +# define LZO_SIZEOF_INT (SIZEOF_INT) +#endif +#if defined(SIZEOF_LONG) +# define LZO_SIZEOF_LONG (SIZEOF_LONG) +#endif +#if defined(SIZEOF_LONG_LONG) +# define LZO_SIZEOF_LONG_LONG (SIZEOF_LONG_LONG) +#endif +#if defined(SIZEOF___INT16) +# define LZO_SIZEOF___INT16 (SIZEOF___INT16) +#endif +#if defined(SIZEOF___INT32) +# define LZO_SIZEOF___INT32 (SIZEOF___INT32) +#endif +#if defined(SIZEOF___INT64) +# define LZO_SIZEOF___INT64 (SIZEOF___INT64) +#endif +#if defined(SIZEOF_VOID_P) +# define LZO_SIZEOF_VOID_P (SIZEOF_VOID_P) +#endif +#if defined(SIZEOF_SIZE_T) +# define LZO_SIZEOF_SIZE_T (SIZEOF_SIZE_T) +#endif +#if defined(SIZEOF_PTRDIFF_T) +# define LZO_SIZEOF_PTRDIFF_T (SIZEOF_PTRDIFF_T) +#endif +#define __LZO_LSR(x,b) (((x)+0ul) >> (b)) +#if !defined(LZO_SIZEOF_SHORT) +# if (LZO_ARCH_CRAY_PVP) +# define LZO_SIZEOF_SHORT 8 +# elif (USHRT_MAX == LZO_0xffffL) +# define LZO_SIZEOF_SHORT 2 +# elif (__LZO_LSR(USHRT_MAX,7) == 1) +# define LZO_SIZEOF_SHORT 1 +# elif (__LZO_LSR(USHRT_MAX,15) == 1) +# define LZO_SIZEOF_SHORT 2 +# elif (__LZO_LSR(USHRT_MAX,31) == 1) +# define LZO_SIZEOF_SHORT 4 +# elif (__LZO_LSR(USHRT_MAX,63) == 1) +# define LZO_SIZEOF_SHORT 8 +# elif (__LZO_LSR(USHRT_MAX,127) == 1) +# define LZO_SIZEOF_SHORT 16 +# else +# error "LZO_SIZEOF_SHORT" +# endif +#endif +#if !defined(LZO_SIZEOF_INT) +# if (LZO_ARCH_CRAY_PVP) +# define LZO_SIZEOF_INT 8 +# elif (UINT_MAX == LZO_0xffffL) +# define LZO_SIZEOF_INT 2 +# elif (UINT_MAX == LZO_0xffffffffL) +# define LZO_SIZEOF_INT 4 +# elif (__LZO_LSR(UINT_MAX,7) == 1) +# define LZO_SIZEOF_INT 1 +# elif (__LZO_LSR(UINT_MAX,15) == 1) +# define LZO_SIZEOF_INT 2 +# elif (__LZO_LSR(UINT_MAX,31) == 1) +# define LZO_SIZEOF_INT 4 +# elif (__LZO_LSR(UINT_MAX,63) == 1) +# define LZO_SIZEOF_INT 8 +# elif (__LZO_LSR(UINT_MAX,127) == 1) +# define LZO_SIZEOF_INT 16 +# else +# error "LZO_SIZEOF_INT" +# endif +#endif +#if !defined(LZO_SIZEOF_LONG) +# if (ULONG_MAX == LZO_0xffffffffL) +# define LZO_SIZEOF_LONG 4 +# elif (__LZO_LSR(ULONG_MAX,7) == 1) +# define LZO_SIZEOF_LONG 1 +# elif (__LZO_LSR(ULONG_MAX,15) == 1) +# define LZO_SIZEOF_LONG 2 +# elif (__LZO_LSR(ULONG_MAX,31) == 1) +# define LZO_SIZEOF_LONG 4 +# elif (__LZO_LSR(ULONG_MAX,63) == 1) +# define LZO_SIZEOF_LONG 8 +# elif (__LZO_LSR(ULONG_MAX,127) == 1) +# define LZO_SIZEOF_LONG 16 +# else +# error "LZO_SIZEOF_LONG" +# endif +#endif +#if !defined(LZO_SIZEOF_LONG_LONG) && !defined(LZO_SIZEOF___INT64) +#if (LZO_SIZEOF_LONG > 0 && LZO_SIZEOF_LONG < 8) +# if defined(__LONG_MAX__) && defined(__LONG_LONG_MAX__) +# if (LZO_CC_GNUC >= 0x030300ul) +# if ((__LONG_MAX__)+0 == (__LONG_LONG_MAX__)+0) +# define LZO_SIZEOF_LONG_LONG LZO_SIZEOF_LONG +# elif (__LZO_LSR(__LONG_LONG_MAX__,30) == 1) +# define LZO_SIZEOF_LONG_LONG 4 +# endif +# endif +# endif +#endif +#endif +#if !defined(LZO_SIZEOF_LONG_LONG) && !defined(LZO_SIZEOF___INT64) +#if (LZO_SIZEOF_LONG > 0 && LZO_SIZEOF_LONG < 8) +#if (LZO_ARCH_I086 && LZO_CC_DMC) +#elif (LZO_CC_CILLY) && defined(__GNUC__) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define LZO_SIZEOF_LONG_LONG 8 +#elif ((LZO_OS_WIN32 || LZO_OS_WIN64 || defined(_WIN32)) && LZO_CC_MSC && (_MSC_VER >= 1400)) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_OS_WIN64 || defined(_WIN64)) +# define LZO_SIZEOF___INT64 8 +#elif (LZO_ARCH_I386 && (LZO_CC_DMC)) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_ARCH_I386 && (LZO_CC_SYMANTECC && (__SC__ >= 0x700))) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_ARCH_I386 && (LZO_CC_INTELC && defined(__linux__))) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_ARCH_I386 && (LZO_CC_MWERKS || LZO_CC_PELLESC || LZO_CC_PGI || LZO_CC_SUNPROC)) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_ARCH_I386 && (LZO_CC_INTELC || LZO_CC_MSC)) +# define LZO_SIZEOF___INT64 8 +#elif ((LZO_OS_WIN32 || defined(_WIN32)) && (LZO_CC_MSC)) +# define LZO_SIZEOF___INT64 8 +#elif (LZO_ARCH_I386 && (LZO_CC_BORLANDC && (__BORLANDC__ >= 0x0520))) +# define LZO_SIZEOF___INT64 8 +#elif (LZO_ARCH_I386 && (LZO_CC_WATCOMC && (__WATCOMC__ >= 1100))) +# define LZO_SIZEOF___INT64 8 +#elif (LZO_CC_WATCOMC && defined(_INTEGRAL_MAX_BITS) && (_INTEGRAL_MAX_BITS == 64)) +# define LZO_SIZEOF___INT64 8 +#elif (LZO_OS_OS400 || defined(__OS400__)) && defined(__LLP64_IFC__) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (defined(__vms) || defined(__VMS)) && (__INITIAL_POINTER_SIZE+0 == 64) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_CC_SDCC) && (LZO_SIZEOF_INT == 2) +#elif 1 && defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) +# define LZO_SIZEOF_LONG_LONG 8 +#endif +#endif +#endif +#if defined(__cplusplus) && (LZO_CC_GNUC) +# if (LZO_CC_GNUC < 0x020800ul) +# undef LZO_SIZEOF_LONG_LONG +# endif +#endif +#if (LZO_CFG_NO_LONG_LONG) || defined(__NO_LONG_LONG) +# undef LZO_SIZEOF_LONG_LONG +#endif +#if !defined(LZO_SIZEOF_VOID_P) +#if (LZO_ARCH_I086) +# define __LZO_WORDSIZE 2 +# if (LZO_MM_TINY || LZO_MM_SMALL || LZO_MM_MEDIUM) +# define LZO_SIZEOF_VOID_P 2 +# elif (LZO_MM_COMPACT || LZO_MM_LARGE || LZO_MM_HUGE) +# define LZO_SIZEOF_VOID_P 4 +# else +# error "LZO_MM" +# endif +#elif (LZO_ARCH_AVR || LZO_ARCH_Z80) +# define __LZO_WORDSIZE 1 +# define LZO_SIZEOF_VOID_P 2 +#elif (LZO_ARCH_C166 || LZO_ARCH_MCS51 || LZO_ARCH_MCS251 || LZO_ARCH_MSP430) +# define LZO_SIZEOF_VOID_P 2 +#elif (LZO_ARCH_H8300) +# if defined(__NORMAL_MODE__) +# define __LZO_WORDSIZE 4 +# define LZO_SIZEOF_VOID_P 2 +# elif defined(__H8300H__) || defined(__H8300S__) || defined(__H8300SX__) +# define __LZO_WORDSIZE 4 +# define LZO_SIZEOF_VOID_P 4 +# else +# define __LZO_WORDSIZE 2 +# define LZO_SIZEOF_VOID_P 2 +# endif +# if (LZO_CC_GNUC && (LZO_CC_GNUC < 0x040000ul)) && (LZO_SIZEOF_INT == 4) +# define LZO_SIZEOF_SIZE_T LZO_SIZEOF_INT +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_INT +# endif +#elif (LZO_ARCH_M16C) +# define __LZO_WORDSIZE 2 +# if defined(__m32c_cpu__) || defined(__m32cm_cpu__) +# define LZO_SIZEOF_VOID_P 4 +# else +# define LZO_SIZEOF_VOID_P 2 +# endif +#elif (LZO_SIZEOF_LONG == 8) && ((defined(__mips__) && defined(__R5900__)) || defined(__MIPS_PSX2__)) +# define __LZO_WORDSIZE 8 +# define LZO_SIZEOF_VOID_P 4 +#elif defined(__LLP64__) || defined(__LLP64) || defined(_LLP64) || defined(_WIN64) +# define __LZO_WORDSIZE 8 +# define LZO_SIZEOF_VOID_P 8 +#elif (LZO_OS_OS400 || defined(__OS400__)) && defined(__LLP64_IFC__) +# define LZO_SIZEOF_VOID_P LZO_SIZEOF_LONG +# define LZO_SIZEOF_SIZE_T LZO_SIZEOF_LONG +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_LONG +#elif (LZO_OS_OS400 || defined(__OS400__)) +# define __LZO_WORDSIZE LZO_SIZEOF_LONG +# define LZO_SIZEOF_VOID_P 16 +# define LZO_SIZEOF_SIZE_T LZO_SIZEOF_LONG +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_LONG +#elif (defined(__vms) || defined(__VMS)) && (__INITIAL_POINTER_SIZE+0 == 64) +# define LZO_SIZEOF_VOID_P 8 +# define LZO_SIZEOF_SIZE_T LZO_SIZEOF_LONG +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_LONG +#elif (LZO_ARCH_SPU) +# if 0 +# define __LZO_WORDSIZE 16 +# endif +# define LZO_SIZEOF_VOID_P 4 +#else +# define LZO_SIZEOF_VOID_P LZO_SIZEOF_LONG +#endif +#endif +#if !defined(LZO_WORDSIZE) +# if defined(__LZO_WORDSIZE) +# define LZO_WORDSIZE __LZO_WORDSIZE +# else +# define LZO_WORDSIZE LZO_SIZEOF_VOID_P +# endif +#endif +#if !defined(LZO_SIZEOF_SIZE_T) +#if (LZO_ARCH_I086 || LZO_ARCH_M16C) +# define LZO_SIZEOF_SIZE_T 2 +#else +# define LZO_SIZEOF_SIZE_T LZO_SIZEOF_VOID_P +#endif +#endif +#if !defined(LZO_SIZEOF_PTRDIFF_T) +#if (LZO_ARCH_I086) +# if (LZO_MM_TINY || LZO_MM_SMALL || LZO_MM_MEDIUM || LZO_MM_HUGE) +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_VOID_P +# elif (LZO_MM_COMPACT || LZO_MM_LARGE) +# if (LZO_CC_BORLANDC || LZO_CC_TURBOC) +# define LZO_SIZEOF_PTRDIFF_T 4 +# else +# define LZO_SIZEOF_PTRDIFF_T 2 +# endif +# else +# error "LZO_MM" +# endif +#else +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_SIZE_T +#endif +#endif +#if (LZO_ABI_NEUTRAL_ENDIAN) +# undef LZO_ABI_BIG_ENDIAN +# undef LZO_ABI_LITTLE_ENDIAN +#elif !(LZO_ABI_BIG_ENDIAN) && !(LZO_ABI_LITTLE_ENDIAN) +#if (LZO_ARCH_ALPHA) && (LZO_ARCH_CRAY_MPP) +# define LZO_ABI_BIG_ENDIAN 1 +#elif (LZO_ARCH_IA64) && (LZO_OS_POSIX_LINUX || LZO_OS_WIN64) +# define LZO_ABI_LITTLE_ENDIAN 1 +#elif (LZO_ARCH_ALPHA || LZO_ARCH_AMD64 || LZO_ARCH_BLACKFIN || LZO_ARCH_CRIS || LZO_ARCH_I086 || LZO_ARCH_I386 || LZO_ARCH_MSP430) +# define LZO_ABI_LITTLE_ENDIAN 1 +#elif (LZO_ARCH_AVR32 || LZO_ARCH_M68K || LZO_ARCH_S390) +# define LZO_ABI_BIG_ENDIAN 1 +#elif 1 && defined(__IAR_SYSTEMS_ICC__) && defined(__LITTLE_ENDIAN__) +# if (__LITTLE_ENDIAN__ == 1) +# define LZO_ABI_LITTLE_ENDIAN 1 +# else +# define LZO_ABI_BIG_ENDIAN 1 +# endif +#elif 1 && defined(__BIG_ENDIAN__) && !defined(__LITTLE_ENDIAN__) +# define LZO_ABI_BIG_ENDIAN 1 +#elif 1 && defined(__LITTLE_ENDIAN__) && !defined(__BIG_ENDIAN__) +# define LZO_ABI_LITTLE_ENDIAN 1 +#elif 1 && (LZO_ARCH_ARM) && defined(__ARMEB__) && !defined(__ARMEL__) +# define LZO_ABI_BIG_ENDIAN 1 +#elif 1 && (LZO_ARCH_ARM) && defined(__ARMEL__) && !defined(__ARMEB__) +# define LZO_ABI_LITTLE_ENDIAN 1 +#elif 1 && (LZO_ARCH_MIPS) && defined(__MIPSEB__) && !defined(__MIPSEL__) +# define LZO_ABI_BIG_ENDIAN 1 +#elif 1 && (LZO_ARCH_MIPS) && defined(__MIPSEL__) && !defined(__MIPSEB__) +# define LZO_ABI_LITTLE_ENDIAN 1 +#endif +#endif +#if (LZO_ABI_BIG_ENDIAN) && (LZO_ABI_LITTLE_ENDIAN) +# error "this should not happen" +#endif +#if (LZO_ABI_BIG_ENDIAN) +# define LZO_INFO_ABI_ENDIAN "be" +#elif (LZO_ABI_LITTLE_ENDIAN) +# define LZO_INFO_ABI_ENDIAN "le" +#elif (LZO_ABI_NEUTRAL_ENDIAN) +# define LZO_INFO_ABI_ENDIAN "neutral" +#endif +#if (LZO_SIZEOF_INT == 1 && LZO_SIZEOF_LONG == 2 && LZO_SIZEOF_VOID_P == 2) +# define LZO_ABI_I8LP16 1 +# define LZO_INFO_ABI_PM "i8lp16" +#elif (LZO_SIZEOF_INT == 2 && LZO_SIZEOF_LONG == 2 && LZO_SIZEOF_VOID_P == 2) +# define LZO_ABI_ILP16 1 +# define LZO_INFO_ABI_PM "ilp16" +#elif (LZO_SIZEOF_INT == 4 && LZO_SIZEOF_LONG == 4 && LZO_SIZEOF_VOID_P == 4) +# define LZO_ABI_ILP32 1 +# define LZO_INFO_ABI_PM "ilp32" +#elif (LZO_SIZEOF_INT == 4 && LZO_SIZEOF_LONG == 4 && LZO_SIZEOF_VOID_P == 8 && LZO_SIZEOF_SIZE_T == 8) +# define LZO_ABI_LLP64 1 +# define LZO_INFO_ABI_PM "llp64" +#elif (LZO_SIZEOF_INT == 4 && LZO_SIZEOF_LONG == 8 && LZO_SIZEOF_VOID_P == 8) +# define LZO_ABI_LP64 1 +# define LZO_INFO_ABI_PM "lp64" +#elif (LZO_SIZEOF_INT == 8 && LZO_SIZEOF_LONG == 8 && LZO_SIZEOF_VOID_P == 8) +# define LZO_ABI_ILP64 1 +# define LZO_INFO_ABI_PM "ilp64" +#elif (LZO_SIZEOF_INT == 4 && LZO_SIZEOF_LONG == 8 && LZO_SIZEOF_VOID_P == 4) +# define LZO_ABI_IP32L64 1 +# define LZO_INFO_ABI_PM "ip32l64" +#endif +#if !defined(__LZO_LIBC_OVERRIDE) +#if (LZO_LIBC_NAKED) +# define LZO_INFO_LIBC "naked" +#elif (LZO_LIBC_FREESTANDING) +# define LZO_INFO_LIBC "freestanding" +#elif (LZO_LIBC_MOSTLY_FREESTANDING) +# define LZO_INFO_LIBC "mfreestanding" +#elif (LZO_LIBC_ISOC90) +# define LZO_INFO_LIBC "isoc90" +#elif (LZO_LIBC_ISOC99) +# define LZO_INFO_LIBC "isoc99" +#elif defined(__dietlibc__) +# define LZO_LIBC_DIETLIBC 1 +# define LZO_INFO_LIBC "dietlibc" +#elif defined(_NEWLIB_VERSION) +# define LZO_LIBC_NEWLIB 1 +# define LZO_INFO_LIBC "newlib" +#elif defined(__UCLIBC__) && defined(__UCLIBC_MAJOR__) && defined(__UCLIBC_MINOR__) +# if defined(__UCLIBC_SUBLEVEL__) +# define LZO_LIBC_UCLIBC (__UCLIBC_MAJOR__ * 0x10000L + __UCLIBC_MINOR__ * 0x100 + __UCLIBC_SUBLEVEL__) +# else +# define LZO_LIBC_UCLIBC 0x00090bL +# endif +# define LZO_INFO_LIBC "uclibc" +#elif defined(__GLIBC__) && defined(__GLIBC_MINOR__) +# define LZO_LIBC_GLIBC (__GLIBC__ * 0x10000L + __GLIBC_MINOR__ * 0x100) +# define LZO_INFO_LIBC "glibc" +#elif (LZO_CC_MWERKS) && defined(__MSL__) +# define LZO_LIBC_MSL __MSL__ +# define LZO_INFO_LIBC "msl" +#elif 1 && defined(__IAR_SYSTEMS_ICC__) +# define LZO_LIBC_ISOC90 1 +# define LZO_INFO_LIBC "isoc90" +#else +# define LZO_LIBC_DEFAULT 1 +# define LZO_INFO_LIBC "default" +#endif +#endif +#if !defined(__lzo_gnuc_extension__) +#if (LZO_CC_GNUC >= 0x020800ul) +# define __lzo_gnuc_extension__ __extension__ +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_gnuc_extension__ __extension__ +#else +# define __lzo_gnuc_extension__ /*empty*/ +#endif +#endif +#if !defined(__lzo_ua_volatile) +# define __lzo_ua_volatile volatile +#endif +#if !defined(__lzo_alignof) +#if (LZO_CC_CILLY || LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_LLVM || LZO_CC_PATHSCALE || LZO_CC_PGI) +# define __lzo_alignof(e) __alignof__(e) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 700)) +# define __lzo_alignof(e) __alignof__(e) +#elif (LZO_CC_MSC && (_MSC_VER >= 1300)) +# define __lzo_alignof(e) __alignof(e) +#elif (LZO_CC_SUNPROC && (LZO_CC_SUNPROC >= 0x5100)) +# define __lzo_alignof(e) __alignof__(e) +#endif +#endif +#if defined(__lzo_alignof) +# define __lzo_HAVE_alignof 1 +#endif +#if !defined(__lzo_constructor) +#if (LZO_CC_GNUC >= 0x030400ul) +# define __lzo_constructor __attribute__((__constructor__,__used__)) +#elif (LZO_CC_GNUC >= 0x020700ul) +# define __lzo_constructor __attribute__((__constructor__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_constructor __attribute__((__constructor__)) +#endif +#endif +#if defined(__lzo_constructor) +# define __lzo_HAVE_constructor 1 +#endif +#if !defined(__lzo_destructor) +#if (LZO_CC_GNUC >= 0x030400ul) +# define __lzo_destructor __attribute__((__destructor__,__used__)) +#elif (LZO_CC_GNUC >= 0x020700ul) +# define __lzo_destructor __attribute__((__destructor__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_destructor __attribute__((__destructor__)) +#endif +#endif +#if defined(__lzo_destructor) +# define __lzo_HAVE_destructor 1 +#endif +#if (__lzo_HAVE_destructor) && !(__lzo_HAVE_constructor) +# error "this should not happen" +#endif +#if !defined(__lzo_inline) +#if (LZO_CC_TURBOC && (__TURBOC__ <= 0x0295)) +#elif defined(__cplusplus) +# define __lzo_inline inline +#elif (LZO_CC_BORLANDC && (__BORLANDC__ >= 0x0550)) +# define __lzo_inline __inline +#elif (LZO_CC_CILLY || LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_LLVM || LZO_CC_PATHSCALE || LZO_CC_PGI) +# define __lzo_inline __inline__ +#elif (LZO_CC_DMC) +# define __lzo_inline __inline +#elif (LZO_CC_INTELC) +# define __lzo_inline __inline +#elif (LZO_CC_MWERKS && (__MWERKS__ >= 0x2405)) +# define __lzo_inline __inline +#elif (LZO_CC_MSC && (_MSC_VER >= 900)) +# define __lzo_inline __inline +#elif (LZO_CC_SUNPROC && (LZO_CC_SUNPROC >= 0x5100)) +# define __lzo_inline __inline__ +#elif defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) +# define __lzo_inline inline +#endif +#endif +#if defined(__lzo_inline) +# define __lzo_HAVE_inline 1 +#else +# define __lzo_inline /*empty*/ +#endif +#if !defined(__lzo_forceinline) +#if (LZO_CC_GNUC >= 0x030200ul) +# define __lzo_forceinline __inline__ __attribute__((__always_inline__)) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 450) && LZO_CC_SYNTAX_MSC) +# define __lzo_forceinline __forceinline +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 800) && LZO_CC_SYNTAX_GNUC) +# define __lzo_forceinline __inline__ __attribute__((__always_inline__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_forceinline __inline__ __attribute__((__always_inline__)) +#elif (LZO_CC_MSC && (_MSC_VER >= 1200)) +# define __lzo_forceinline __forceinline +#elif (LZO_CC_SUNPROC && (LZO_CC_SUNPROC >= 0x5100)) +# define __lzo_forceinline __inline__ __attribute__((__always_inline__)) +#endif +#endif +#if defined(__lzo_forceinline) +# define __lzo_HAVE_forceinline 1 +#else +# define __lzo_forceinline /*empty*/ +#endif +#if !defined(__lzo_noinline) +#if 1 && (LZO_ARCH_I386) && (LZO_CC_GNUC >= 0x040000ul) && (LZO_CC_GNUC < 0x040003ul) +# define __lzo_noinline __attribute__((__noinline__,__used__)) +#elif (LZO_CC_GNUC >= 0x030200ul) +# define __lzo_noinline __attribute__((__noinline__)) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 600) && LZO_CC_SYNTAX_MSC) +# define __lzo_noinline __declspec(noinline) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 800) && LZO_CC_SYNTAX_GNUC) +# define __lzo_noinline __attribute__((__noinline__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_noinline __attribute__((__noinline__)) +#elif (LZO_CC_MSC && (_MSC_VER >= 1300)) +# define __lzo_noinline __declspec(noinline) +#elif (LZO_CC_MWERKS && (__MWERKS__ >= 0x3200) && (LZO_OS_WIN32 || LZO_OS_WIN64)) +# if defined(__cplusplus) +# else +# define __lzo_noinline __declspec(noinline) +# endif +#elif (LZO_CC_SUNPROC && (LZO_CC_SUNPROC >= 0x5100)) +# define __lzo_noinline __attribute__((__noinline__)) +#endif +#endif +#if defined(__lzo_noinline) +# define __lzo_HAVE_noinline 1 +#else +# define __lzo_noinline /*empty*/ +#endif +#if (__lzo_HAVE_forceinline || __lzo_HAVE_noinline) && !(__lzo_HAVE_inline) +# error "this should not happen" +#endif +#if !defined(__lzo_noreturn) +#if (LZO_CC_GNUC >= 0x020700ul) +# define __lzo_noreturn __attribute__((__noreturn__)) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 450) && LZO_CC_SYNTAX_MSC) +# define __lzo_noreturn __declspec(noreturn) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 600) && LZO_CC_SYNTAX_GNUC) +# define __lzo_noreturn __attribute__((__noreturn__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_noreturn __attribute__((__noreturn__)) +#elif (LZO_CC_MSC && (_MSC_VER >= 1200)) +# define __lzo_noreturn __declspec(noreturn) +#endif +#endif +#if defined(__lzo_noreturn) +# define __lzo_HAVE_noreturn 1 +#else +# define __lzo_noreturn /*empty*/ +#endif +#if !defined(__lzo_nothrow) +#if (LZO_CC_GNUC >= 0x030300ul) +# define __lzo_nothrow __attribute__((__nothrow__)) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 450) && LZO_CC_SYNTAX_MSC) && defined(__cplusplus) +# define __lzo_nothrow __declspec(nothrow) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 900) && LZO_CC_SYNTAX_GNUC) +# define __lzo_nothrow __attribute__((__nothrow__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_nothrow __attribute__((__nothrow__)) +#elif (LZO_CC_MSC && (_MSC_VER >= 1200)) && defined(__cplusplus) +# define __lzo_nothrow __declspec(nothrow) +#endif +#endif +#if defined(__lzo_nothrow) +# define __lzo_HAVE_nothrow 1 +#else +# define __lzo_nothrow /*empty*/ +#endif +#if !defined(__lzo_restrict) +#if (LZO_CC_GNUC >= 0x030400ul) +# define __lzo_restrict __restrict__ +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 600) && LZO_CC_SYNTAX_GNUC) +# define __lzo_restrict __restrict__ +#elif (LZO_CC_CLANG || LZO_CC_LLVM) +# define __lzo_restrict __restrict__ +#elif (LZO_CC_MSC && (_MSC_VER >= 1400)) +# define __lzo_restrict __restrict +#endif +#endif +#if defined(__lzo_restrict) +# define __lzo_HAVE_restrict 1 +#else +# define __lzo_restrict /*empty*/ +#endif +#if !defined(__lzo_likely) && !defined(__lzo_unlikely) +#if (LZO_CC_GNUC >= 0x030200ul) +# define __lzo_likely(e) (__builtin_expect(!!(e),1)) +# define __lzo_unlikely(e) (__builtin_expect(!!(e),0)) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 800)) +# define __lzo_likely(e) (__builtin_expect(!!(e),1)) +# define __lzo_unlikely(e) (__builtin_expect(!!(e),0)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_likely(e) (__builtin_expect(!!(e),1)) +# define __lzo_unlikely(e) (__builtin_expect(!!(e),0)) +#endif +#endif +#if defined(__lzo_likely) +# define __lzo_HAVE_likely 1 +#else +# define __lzo_likely(e) (e) +#endif +#if defined(__lzo_unlikely) +# define __lzo_HAVE_unlikely 1 +#else +# define __lzo_unlikely(e) (e) +#endif +#if !defined(LZO_UNUSED) +# if (LZO_CC_BORLANDC && (__BORLANDC__ >= 0x0600)) +# define LZO_UNUSED(var) ((void) &var) +# elif (LZO_CC_BORLANDC || LZO_CC_HIGHC || LZO_CC_NDPC || LZO_CC_PELLESC || LZO_CC_TURBOC) +# define LZO_UNUSED(var) if (&var) ; else +# elif (LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define LZO_UNUSED(var) ((void) var) +# elif (LZO_CC_MSC && (_MSC_VER < 900)) +# define LZO_UNUSED(var) if (&var) ; else +# elif (LZO_CC_KEILC) +# define LZO_UNUSED(var) {extern int __lzo_unused[1-2*!(sizeof(var)>0)];} +# elif (LZO_CC_PACIFICC) +# define LZO_UNUSED(var) ((void) sizeof(var)) +# elif (LZO_CC_WATCOMC) && defined(__cplusplus) +# define LZO_UNUSED(var) ((void) var) +# else +# define LZO_UNUSED(var) ((void) &var) +# endif +#endif +#if !defined(LZO_UNUSED_FUNC) +# if (LZO_CC_BORLANDC && (__BORLANDC__ >= 0x0600)) +# define LZO_UNUSED_FUNC(func) ((void) func) +# elif (LZO_CC_BORLANDC || LZO_CC_NDPC || LZO_CC_TURBOC) +# define LZO_UNUSED_FUNC(func) if (func) ; else +# elif (LZO_CC_CLANG || LZO_CC_LLVM) +# define LZO_UNUSED_FUNC(func) ((void) &func) +# elif (LZO_CC_MSC && (_MSC_VER < 900)) +# define LZO_UNUSED_FUNC(func) if (func) ; else +# elif (LZO_CC_MSC) +# define LZO_UNUSED_FUNC(func) ((void) &func) +# elif (LZO_CC_KEILC || LZO_CC_PELLESC) +# define LZO_UNUSED_FUNC(func) {extern int __lzo_unused[1-2*!(sizeof((int)func)>0)];} +# else +# define LZO_UNUSED_FUNC(func) ((void) func) +# endif +#endif +#if !defined(LZO_UNUSED_LABEL) +# if (LZO_CC_WATCOMC) && defined(__cplusplus) +# define LZO_UNUSED_LABEL(l) switch(0) case 1:goto l +# elif (LZO_CC_CLANG || LZO_CC_INTELC || LZO_CC_WATCOMC) +# define LZO_UNUSED_LABEL(l) if (0) goto l +# else +# define LZO_UNUSED_LABEL(l) switch(0) case 1:goto l +# endif +#endif +#if !defined(LZO_DEFINE_UNINITIALIZED_VAR) +# if 0 +# define LZO_DEFINE_UNINITIALIZED_VAR(type,var,init) type var +# elif 0 && (LZO_CC_GNUC) +# define LZO_DEFINE_UNINITIALIZED_VAR(type,var,init) type var = var +# else +# define LZO_DEFINE_UNINITIALIZED_VAR(type,var,init) type var = init +# endif +#endif +#if !defined(LZO_UNCONST_CAST) +# if 0 && defined(__cplusplus) +# define LZO_UNCONST_CAST(t,e) (const_cast (e)) +# elif (LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define LZO_UNCONST_CAST(t,e) ((t) ((void *) ((char *) ((lzo_uintptr_t) ((const void *) (e)))))) +# else +# define LZO_UNCONST_CAST(t,e) ((t) ((void *) ((char *) ((const void *) (e))))) +# endif +#endif +#if !defined(LZO_COMPILE_TIME_ASSERT_HEADER) +# if (LZO_CC_AZTECC || LZO_CC_ZORTECHC) +# define LZO_COMPILE_TIME_ASSERT_HEADER(e) extern int __lzo_cta[1-!(e)]; +# elif (LZO_CC_DMC || LZO_CC_SYMANTECC) +# define LZO_COMPILE_TIME_ASSERT_HEADER(e) extern int __lzo_cta[1u-2*!(e)]; +# elif (LZO_CC_TURBOC && (__TURBOC__ == 0x0295)) +# define LZO_COMPILE_TIME_ASSERT_HEADER(e) extern int __lzo_cta[1-!(e)]; +# else +# define LZO_COMPILE_TIME_ASSERT_HEADER(e) extern int __lzo_cta[1-2*!(e)]; +# endif +#endif +#if !defined(LZO_COMPILE_TIME_ASSERT) +# if (LZO_CC_AZTECC) +# define LZO_COMPILE_TIME_ASSERT(e) {typedef int __lzo_cta_t[1-!(e)];} +# elif (LZO_CC_DMC || LZO_CC_PACIFICC || LZO_CC_SYMANTECC || LZO_CC_ZORTECHC) +# define LZO_COMPILE_TIME_ASSERT(e) switch(0) case 1:case !(e):break; +# elif (LZO_CC_MSC && (_MSC_VER < 900)) +# define LZO_COMPILE_TIME_ASSERT(e) switch(0) case 1:case !(e):break; +# elif (LZO_CC_TURBOC && (__TURBOC__ == 0x0295)) +# define LZO_COMPILE_TIME_ASSERT(e) switch(0) case 1:case !(e):break; +# else +# define LZO_COMPILE_TIME_ASSERT(e) {typedef int __lzo_cta_t[1-2*!(e)];} +# endif +#endif +#if (LZO_ARCH_I086 || LZO_ARCH_I386) && (LZO_OS_DOS16 || LZO_OS_DOS32 || LZO_OS_OS2 || LZO_OS_OS216 || LZO_OS_WIN16 || LZO_OS_WIN32 || LZO_OS_WIN64) +# if (LZO_CC_GNUC || LZO_CC_HIGHC || LZO_CC_NDPC || LZO_CC_PACIFICC) +# elif (LZO_CC_DMC || LZO_CC_SYMANTECC || LZO_CC_ZORTECHC) +# define __lzo_cdecl __cdecl +# define __lzo_cdecl_atexit /*empty*/ +# define __lzo_cdecl_main __cdecl +# if (LZO_OS_OS2 && (LZO_CC_DMC || LZO_CC_SYMANTECC)) +# define __lzo_cdecl_qsort __pascal +# elif (LZO_OS_OS2 && (LZO_CC_ZORTECHC)) +# define __lzo_cdecl_qsort _stdcall +# else +# define __lzo_cdecl_qsort __cdecl +# endif +# elif (LZO_CC_WATCOMC) +# define __lzo_cdecl __cdecl +# else +# define __lzo_cdecl __cdecl +# define __lzo_cdecl_atexit __cdecl +# define __lzo_cdecl_main __cdecl +# define __lzo_cdecl_qsort __cdecl +# endif +# if (LZO_CC_GNUC || LZO_CC_HIGHC || LZO_CC_NDPC || LZO_CC_PACIFICC || LZO_CC_WATCOMC) +# elif (LZO_OS_OS2 && (LZO_CC_DMC || LZO_CC_SYMANTECC)) +# define __lzo_cdecl_sighandler __pascal +# elif (LZO_OS_OS2 && (LZO_CC_ZORTECHC)) +# define __lzo_cdecl_sighandler _stdcall +# elif (LZO_CC_MSC && (_MSC_VER >= 1400)) && defined(_M_CEE_PURE) +# define __lzo_cdecl_sighandler __clrcall +# elif (LZO_CC_MSC && (_MSC_VER >= 600 && _MSC_VER < 700)) +# if defined(_DLL) +# define __lzo_cdecl_sighandler _far _cdecl _loadds +# elif defined(_MT) +# define __lzo_cdecl_sighandler _far _cdecl +# else +# define __lzo_cdecl_sighandler _cdecl +# endif +# else +# define __lzo_cdecl_sighandler __cdecl +# endif +#elif (LZO_ARCH_I386) && (LZO_CC_WATCOMC) +# define __lzo_cdecl __cdecl +#elif (LZO_ARCH_M68K && LZO_OS_TOS && (LZO_CC_PUREC || LZO_CC_TURBOC)) +# define __lzo_cdecl cdecl +#endif +#if !defined(__lzo_cdecl) +# define __lzo_cdecl /*empty*/ +#endif +#if !defined(__lzo_cdecl_atexit) +# define __lzo_cdecl_atexit /*empty*/ +#endif +#if !defined(__lzo_cdecl_main) +# define __lzo_cdecl_main /*empty*/ +#endif +#if !defined(__lzo_cdecl_qsort) +# define __lzo_cdecl_qsort /*empty*/ +#endif +#if !defined(__lzo_cdecl_sighandler) +# define __lzo_cdecl_sighandler /*empty*/ +#endif +#if !defined(__lzo_cdecl_va) +# define __lzo_cdecl_va __lzo_cdecl +#endif +#if !(LZO_CFG_NO_WINDOWS_H) +#if (LZO_OS_CYGWIN || (LZO_OS_EMX && defined(__RSXNT__)) || LZO_OS_WIN32 || LZO_OS_WIN64) +# if (LZO_CC_WATCOMC && (__WATCOMC__ < 1000)) +# elif (LZO_OS_WIN32 && LZO_CC_GNUC) && defined(__PW32__) +# elif ((LZO_OS_CYGWIN || defined(__MINGW32__)) && (LZO_CC_GNUC && (LZO_CC_GNUC < 0x025f00ul))) +# else +# define LZO_HAVE_WINDOWS_H 1 +# endif +#endif +#endif +#if (LZO_ARCH_ALPHA) +# define LZO_OPT_AVOID_UINT_INDEX 1 +# define LZO_OPT_AVOID_SHORT 1 +# define LZO_OPT_AVOID_USHORT 1 +#elif (LZO_ARCH_AMD64) +# define LZO_OPT_AVOID_INT_INDEX 1 +# define LZO_OPT_AVOID_UINT_INDEX 1 +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +# define LZO_OPT_UNALIGNED64 1 +#elif (LZO_ARCH_ARM && LZO_ARCH_ARM_THUMB) +#elif (LZO_ARCH_ARM) +# define LZO_OPT_AVOID_SHORT 1 +# define LZO_OPT_AVOID_USHORT 1 +#elif (LZO_ARCH_CRIS) +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +#elif (LZO_ARCH_I386) +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +#elif (LZO_ARCH_IA64) +# define LZO_OPT_AVOID_INT_INDEX 1 +# define LZO_OPT_AVOID_UINT_INDEX 1 +# define LZO_OPT_PREFER_POSTINC 1 +#elif (LZO_ARCH_M68K) +# define LZO_OPT_PREFER_POSTINC 1 +# define LZO_OPT_PREFER_PREDEC 1 +# if defined(__mc68020__) && !defined(__mcoldfire__) +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +# endif +#elif (LZO_ARCH_MIPS) +# define LZO_OPT_AVOID_UINT_INDEX 1 +#elif (LZO_ARCH_POWERPC) +# define LZO_OPT_PREFER_PREINC 1 +# define LZO_OPT_PREFER_PREDEC 1 +# if (LZO_ABI_BIG_ENDIAN) +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +# endif +#elif (LZO_ARCH_S390) +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +# if (LZO_SIZEOF_SIZE_T == 8) +# define LZO_OPT_UNALIGNED64 1 +# endif +#elif (LZO_ARCH_SH) +# define LZO_OPT_PREFER_POSTINC 1 +# define LZO_OPT_PREFER_PREDEC 1 +#endif +#ifndef LZO_CFG_NO_INLINE_ASM +#if (LZO_CC_LLVM) +# define LZO_CFG_NO_INLINE_ASM 1 +#endif +#endif +#ifndef LZO_CFG_NO_UNALIGNED +#if (LZO_ABI_NEUTRAL_ENDIAN) || (LZO_ARCH_GENERIC) +# define LZO_CFG_NO_UNALIGNED 1 +#endif +#endif +#if (LZO_CFG_NO_UNALIGNED) +# undef LZO_OPT_UNALIGNED16 +# undef LZO_OPT_UNALIGNED32 +# undef LZO_OPT_UNALIGNED64 +#endif +#if (LZO_CFG_NO_INLINE_ASM) +#elif (LZO_ARCH_I386 && (LZO_OS_DOS32 || LZO_OS_WIN32) && (LZO_CC_DMC || LZO_CC_INTELC || LZO_CC_MSC || LZO_CC_PELLESC)) +# define LZO_ASM_SYNTAX_MSC 1 +#elif (LZO_OS_WIN64 && (LZO_CC_DMC || LZO_CC_INTELC || LZO_CC_MSC || LZO_CC_PELLESC)) +#elif (LZO_ARCH_I386 && LZO_CC_GNUC && (LZO_CC_GNUC == 0x011f00ul)) +#elif (LZO_ARCH_I386 && (LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_INTELC || LZO_CC_PATHSCALE)) +# define LZO_ASM_SYNTAX_GNUC 1 +#elif (LZO_ARCH_AMD64 && (LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_INTELC || LZO_CC_PATHSCALE)) +# define LZO_ASM_SYNTAX_GNUC 1 +#endif +#if (LZO_ASM_SYNTAX_GNUC) +#if (LZO_ARCH_I386 && LZO_CC_GNUC && (LZO_CC_GNUC < 0x020000ul)) +# define __LZO_ASM_CLOBBER "ax" +#elif (LZO_CC_INTELC) +# define __LZO_ASM_CLOBBER "memory" +#else +# define __LZO_ASM_CLOBBER "cc", "memory" +#endif +#endif +#if defined(__LZO_INFOSTR_MM) +#elif (LZO_MM_FLAT) && (defined(__LZO_INFOSTR_PM) || defined(LZO_INFO_ABI_PM)) +# define __LZO_INFOSTR_MM "" +#elif defined(LZO_INFO_MM) +# define __LZO_INFOSTR_MM "." LZO_INFO_MM +#else +# define __LZO_INFOSTR_MM "" +#endif +#if defined(__LZO_INFOSTR_PM) +#elif defined(LZO_INFO_ABI_PM) +# define __LZO_INFOSTR_PM "." LZO_INFO_ABI_PM +#else +# define __LZO_INFOSTR_PM "" +#endif +#if defined(__LZO_INFOSTR_ENDIAN) +#elif defined(LZO_INFO_ABI_ENDIAN) +# define __LZO_INFOSTR_ENDIAN "." LZO_INFO_ABI_ENDIAN +#else +# define __LZO_INFOSTR_ENDIAN "" +#endif +#if defined(__LZO_INFOSTR_OSNAME) +#elif defined(LZO_INFO_OS_CONSOLE) +# define __LZO_INFOSTR_OSNAME LZO_INFO_OS "." LZO_INFO_OS_CONSOLE +#elif defined(LZO_INFO_OS_POSIX) +# define __LZO_INFOSTR_OSNAME LZO_INFO_OS "." LZO_INFO_OS_POSIX +#else +# define __LZO_INFOSTR_OSNAME LZO_INFO_OS +#endif +#if defined(__LZO_INFOSTR_LIBC) +#elif defined(LZO_INFO_LIBC) +# define __LZO_INFOSTR_LIBC "." LZO_INFO_LIBC +#else +# define __LZO_INFOSTR_LIBC "" +#endif +#if defined(__LZO_INFOSTR_CCVER) +#elif defined(LZO_INFO_CCVER) +# define __LZO_INFOSTR_CCVER " " LZO_INFO_CCVER +#else +# define __LZO_INFOSTR_CCVER "" +#endif +#define LZO_INFO_STRING \ + LZO_INFO_ARCH __LZO_INFOSTR_MM __LZO_INFOSTR_PM __LZO_INFOSTR_ENDIAN \ + " " __LZO_INFOSTR_OSNAME __LZO_INFOSTR_LIBC " " LZO_INFO_CC __LZO_INFOSTR_CCVER + +#endif /* already included */ + +/* vim:set ts=4 et: */ diff --git a/jni/vnc/LibVNCServer-0.9.9/common/md5.c b/jni/vnc/LibVNCServer-0.9.9/common/md5.c new file mode 100644 index 0000000..e185bc1 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/md5.c @@ -0,0 +1,452 @@ +/* Functions to compute MD5 message digest of files or memory blocks. + according to the definition of MD5 in RFC 1321 from April 1992. + Copyright (C) 1995,1996,1997,1999,2000,2001,2005 + Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* Written by Ulrich Drepper , 1995. */ + +#include + +# include +# include + +#include "md5.h" + +/* #ifdef _LIBC */ +# include +# if __BYTE_ORDER == __BIG_ENDIAN +# define WORDS_BIGENDIAN 1 +# endif +/* We need to keep the namespace clean so define the MD5 function + protected using leading __ . */ +# define md5_init_ctx __md5_init_ctx +# define md5_process_block __md5_process_block +# define md5_process_bytes __md5_process_bytes +# define md5_finish_ctx __md5_finish_ctx +# define md5_read_ctx __md5_read_ctx +# define md5_stream __md5_stream +# define md5_buffer __md5_buffer +/* #endif */ + +#ifdef WORDS_BIGENDIAN +# define SWAP(n) \ + (((n) << 24) | (((n) & 0xff00) << 8) | (((n) >> 8) & 0xff00) | ((n) >> 24)) +#else +# define SWAP(n) (n) +#endif + +void +md5_process_bytes (const void *buffer, size_t len, struct md5_ctx *ctx); +void +md5_process_block (const void *buffer, size_t len, struct md5_ctx *ctx); + +/* This array contains the bytes used to pad the buffer to the next + 64-byte boundary. (RFC 1321, 3.1: Step 1) */ +static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ... */ }; + + +/* Initialize structure containing state of computation. + (RFC 1321, 3.3: Step 3) */ +void +md5_init_ctx (ctx) + struct md5_ctx *ctx; +{ + ctx->A = 0x67452301; + ctx->B = 0xefcdab89; + ctx->C = 0x98badcfe; + ctx->D = 0x10325476; + + ctx->total[0] = ctx->total[1] = 0; + ctx->buflen = 0; +} + +/* Put result from CTX in first 16 bytes following RESBUF. The result + must be in little endian byte order. + + IMPORTANT: On some systems it is required that RESBUF is correctly + aligned for a 32 bits value. */ +void * +md5_read_ctx (ctx, resbuf) + const struct md5_ctx *ctx; + void *resbuf; +{ + ((md5_uint32 *) resbuf)[0] = SWAP (ctx->A); + ((md5_uint32 *) resbuf)[1] = SWAP (ctx->B); + ((md5_uint32 *) resbuf)[2] = SWAP (ctx->C); + ((md5_uint32 *) resbuf)[3] = SWAP (ctx->D); + + return resbuf; +} + +/* Process the remaining bytes in the internal buffer and the usual + prolog according to the standard and write the result to RESBUF. + + IMPORTANT: On some systems it is required that RESBUF is correctly + aligned for a 32 bits value. */ +void * +md5_finish_ctx (ctx, resbuf) + struct md5_ctx *ctx; + void *resbuf; +{ + /* Take yet unprocessed bytes into account. */ + md5_uint32 bytes = ctx->buflen; + size_t pad; + + /* Now count remaining bytes. */ + ctx->total[0] += bytes; + if (ctx->total[0] < bytes) + ++ctx->total[1]; + + pad = bytes >= 56 ? 64 + 56 - bytes : 56 - bytes; + memcpy (&ctx->buffer[bytes], fillbuf, pad); + + /* Put the 64-bit file length in *bits* at the end of the buffer. */ + *(md5_uint32 *) &ctx->buffer[bytes + pad] = SWAP (ctx->total[0] << 3); + *(md5_uint32 *) &ctx->buffer[bytes + pad + 4] = SWAP ((ctx->total[1] << 3) | + (ctx->total[0] >> 29)); + + /* Process last bytes. */ + md5_process_block (ctx->buffer, bytes + pad + 8, ctx); + + return md5_read_ctx (ctx, resbuf); +} + +/* Compute MD5 message digest for bytes read from STREAM. The + resulting message digest number will be written into the 16 bytes + beginning at RESBLOCK. */ +int +md5_stream (stream, resblock) + FILE *stream; + void *resblock; +{ + /* Important: BLOCKSIZE must be a multiple of 64. */ +#define BLOCKSIZE 4096 + struct md5_ctx ctx; + char buffer[BLOCKSIZE + 72]; + size_t sum; + + /* Initialize the computation context. */ + md5_init_ctx (&ctx); + + /* Iterate over full file contents. */ + while (1) + { + /* We read the file in blocks of BLOCKSIZE bytes. One call of the + computation function processes the whole buffer so that with the + next round of the loop another block can be read. */ + size_t n; + sum = 0; + + /* Read block. Take care for partial reads. */ + do + { + n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream); + + sum += n; + } + while (sum < BLOCKSIZE && n != 0); + if (n == 0 && ferror (stream)) + return 1; + + /* If end of file is reached, end the loop. */ + if (n == 0) + break; + + /* Process buffer with BLOCKSIZE bytes. Note that + BLOCKSIZE % 64 == 0 + */ + md5_process_block (buffer, BLOCKSIZE, &ctx); + } + + /* Add the last bytes if necessary. */ + if (sum > 0) + md5_process_bytes (buffer, sum, &ctx); + + /* Construct result in desired memory. */ + md5_finish_ctx (&ctx, resblock); + return 0; +} + +/* Compute MD5 message digest for LEN bytes beginning at BUFFER. The + result is always in little endian byte order, so that a byte-wise + output yields to the wanted ASCII representation of the message + digest. */ +void * +md5_buffer (buffer, len, resblock) + const char *buffer; + size_t len; + void *resblock; +{ + struct md5_ctx ctx; + + /* Initialize the computation context. */ + md5_init_ctx (&ctx); + + /* Process whole buffer but last len % 64 bytes. */ + md5_process_bytes (buffer, len, &ctx); + + /* Put result in desired memory area. */ + return md5_finish_ctx (&ctx, resblock); +} + + +void +md5_process_bytes (buffer, len, ctx) + const void *buffer; + size_t len; + struct md5_ctx *ctx; +{ + /* When we already have some bits in our internal buffer concatenate + both inputs first. */ + if (ctx->buflen != 0) + { + size_t left_over = ctx->buflen; + size_t add = 128 - left_over > len ? len : 128 - left_over; + + memcpy (&ctx->buffer[left_over], buffer, add); + ctx->buflen += add; + + if (ctx->buflen > 64) + { + md5_process_block (ctx->buffer, ctx->buflen & ~63, ctx); + + ctx->buflen &= 63; + /* The regions in the following copy operation cannot overlap. */ + memcpy (ctx->buffer, &ctx->buffer[(left_over + add) & ~63], + ctx->buflen); + } + + buffer = (const char *) buffer + add; + len -= add; + } + + /* Process available complete blocks. */ + if (len >= 64) + { +#if !_STRING_ARCH_unaligned +/* To check alignment gcc has an appropriate operator. Other + compilers don't. */ +# if __GNUC__ >= 2 +# define UNALIGNED_P(p) (((md5_uintptr) p) % __alignof__ (md5_uint32) != 0) +# else +# define UNALIGNED_P(p) (((md5_uintptr) p) % sizeof (md5_uint32) != 0) +# endif + if (UNALIGNED_P (buffer)) + while (len > 64) + { + md5_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx); + buffer = (const char *) buffer + 64; + len -= 64; + } + else +#endif + { + md5_process_block (buffer, len & ~63, ctx); + buffer = (const char *) buffer + (len & ~63); + len &= 63; + } + } + + /* Move remaining bytes in internal buffer. */ + if (len > 0) + { + size_t left_over = ctx->buflen; + + memcpy (&ctx->buffer[left_over], buffer, len); + left_over += len; + if (left_over >= 64) + { + md5_process_block (ctx->buffer, 64, ctx); + left_over -= 64; + memcpy (ctx->buffer, &ctx->buffer[64], left_over); + } + ctx->buflen = left_over; + } +} + + +/* These are the four functions used in the four steps of the MD5 algorithm + and defined in the RFC 1321. The first function is a little bit optimized + (as found in Colin Plumbs public domain implementation). */ +/* #define FF(b, c, d) ((b & c) | (~b & d)) */ +#define FF(b, c, d) (d ^ (b & (c ^ d))) +#define FG(b, c, d) FF (d, b, c) +#define FH(b, c, d) (b ^ c ^ d) +#define FI(b, c, d) (c ^ (b | ~d)) + +/* Process LEN bytes of BUFFER, accumulating context into CTX. + It is assumed that LEN % 64 == 0. */ + +void +md5_process_block (buffer, len, ctx) + const void *buffer; + size_t len; + struct md5_ctx *ctx; +{ + md5_uint32 correct_words[16]; + const md5_uint32 *words = buffer; + size_t nwords = len / sizeof (md5_uint32); + const md5_uint32 *endp = words + nwords; + md5_uint32 A = ctx->A; + md5_uint32 B = ctx->B; + md5_uint32 C = ctx->C; + md5_uint32 D = ctx->D; + + /* First increment the byte count. RFC 1321 specifies the possible + length of the file up to 2^64 bits. Here we only compute the + number of bytes. Do a double word increment. */ + ctx->total[0] += len; + if (ctx->total[0] < len) + ++ctx->total[1]; + + /* Process all bytes in the buffer with 64 bytes in each round of + the loop. */ + while (words < endp) + { + md5_uint32 *cwp = correct_words; + md5_uint32 A_save = A; + md5_uint32 B_save = B; + md5_uint32 C_save = C; + md5_uint32 D_save = D; + + /* First round: using the given function, the context and a constant + the next context is computed. Because the algorithms processing + unit is a 32-bit word and it is determined to work on words in + little endian byte order we perhaps have to change the byte order + before the computation. To reduce the work for the next steps + we store the swapped words in the array CORRECT_WORDS. */ + +#define OP(a, b, c, d, s, T) \ + do \ + { \ + a += FF (b, c, d) + (*cwp++ = SWAP (*words)) + T; \ + ++words; \ + CYCLIC (a, s); \ + a += b; \ + } \ + while (0) + + /* It is unfortunate that C does not provide an operator for + cyclic rotation. Hope the C compiler is smart enough. */ +#define CYCLIC(w, s) (w = (w << s) | (w >> (32 - s))) + + /* Before we start, one word to the strange constants. + They are defined in RFC 1321 as + + T[i] = (int) (4294967296.0 * fabs (sin (i))), i=1..64 + */ + + /* Round 1. */ + OP (A, B, C, D, 7, 0xd76aa478); + OP (D, A, B, C, 12, 0xe8c7b756); + OP (C, D, A, B, 17, 0x242070db); + OP (B, C, D, A, 22, 0xc1bdceee); + OP (A, B, C, D, 7, 0xf57c0faf); + OP (D, A, B, C, 12, 0x4787c62a); + OP (C, D, A, B, 17, 0xa8304613); + OP (B, C, D, A, 22, 0xfd469501); + OP (A, B, C, D, 7, 0x698098d8); + OP (D, A, B, C, 12, 0x8b44f7af); + OP (C, D, A, B, 17, 0xffff5bb1); + OP (B, C, D, A, 22, 0x895cd7be); + OP (A, B, C, D, 7, 0x6b901122); + OP (D, A, B, C, 12, 0xfd987193); + OP (C, D, A, B, 17, 0xa679438e); + OP (B, C, D, A, 22, 0x49b40821); + + /* For the second to fourth round we have the possibly swapped words + in CORRECT_WORDS. Redefine the macro to take an additional first + argument specifying the function to use. */ +#undef OP +#define OP(f, a, b, c, d, k, s, T) \ + do \ + { \ + a += f (b, c, d) + correct_words[k] + T; \ + CYCLIC (a, s); \ + a += b; \ + } \ + while (0) + + /* Round 2. */ + OP (FG, A, B, C, D, 1, 5, 0xf61e2562); + OP (FG, D, A, B, C, 6, 9, 0xc040b340); + OP (FG, C, D, A, B, 11, 14, 0x265e5a51); + OP (FG, B, C, D, A, 0, 20, 0xe9b6c7aa); + OP (FG, A, B, C, D, 5, 5, 0xd62f105d); + OP (FG, D, A, B, C, 10, 9, 0x02441453); + OP (FG, C, D, A, B, 15, 14, 0xd8a1e681); + OP (FG, B, C, D, A, 4, 20, 0xe7d3fbc8); + OP (FG, A, B, C, D, 9, 5, 0x21e1cde6); + OP (FG, D, A, B, C, 14, 9, 0xc33707d6); + OP (FG, C, D, A, B, 3, 14, 0xf4d50d87); + OP (FG, B, C, D, A, 8, 20, 0x455a14ed); + OP (FG, A, B, C, D, 13, 5, 0xa9e3e905); + OP (FG, D, A, B, C, 2, 9, 0xfcefa3f8); + OP (FG, C, D, A, B, 7, 14, 0x676f02d9); + OP (FG, B, C, D, A, 12, 20, 0x8d2a4c8a); + + /* Round 3. */ + OP (FH, A, B, C, D, 5, 4, 0xfffa3942); + OP (FH, D, A, B, C, 8, 11, 0x8771f681); + OP (FH, C, D, A, B, 11, 16, 0x6d9d6122); + OP (FH, B, C, D, A, 14, 23, 0xfde5380c); + OP (FH, A, B, C, D, 1, 4, 0xa4beea44); + OP (FH, D, A, B, C, 4, 11, 0x4bdecfa9); + OP (FH, C, D, A, B, 7, 16, 0xf6bb4b60); + OP (FH, B, C, D, A, 10, 23, 0xbebfbc70); + OP (FH, A, B, C, D, 13, 4, 0x289b7ec6); + OP (FH, D, A, B, C, 0, 11, 0xeaa127fa); + OP (FH, C, D, A, B, 3, 16, 0xd4ef3085); + OP (FH, B, C, D, A, 6, 23, 0x04881d05); + OP (FH, A, B, C, D, 9, 4, 0xd9d4d039); + OP (FH, D, A, B, C, 12, 11, 0xe6db99e5); + OP (FH, C, D, A, B, 15, 16, 0x1fa27cf8); + OP (FH, B, C, D, A, 2, 23, 0xc4ac5665); + + /* Round 4. */ + OP (FI, A, B, C, D, 0, 6, 0xf4292244); + OP (FI, D, A, B, C, 7, 10, 0x432aff97); + OP (FI, C, D, A, B, 14, 15, 0xab9423a7); + OP (FI, B, C, D, A, 5, 21, 0xfc93a039); + OP (FI, A, B, C, D, 12, 6, 0x655b59c3); + OP (FI, D, A, B, C, 3, 10, 0x8f0ccc92); + OP (FI, C, D, A, B, 10, 15, 0xffeff47d); + OP (FI, B, C, D, A, 1, 21, 0x85845dd1); + OP (FI, A, B, C, D, 8, 6, 0x6fa87e4f); + OP (FI, D, A, B, C, 15, 10, 0xfe2ce6e0); + OP (FI, C, D, A, B, 6, 15, 0xa3014314); + OP (FI, B, C, D, A, 13, 21, 0x4e0811a1); + OP (FI, A, B, C, D, 4, 6, 0xf7537e82); + OP (FI, D, A, B, C, 11, 10, 0xbd3af235); + OP (FI, C, D, A, B, 2, 15, 0x2ad7d2bb); + OP (FI, B, C, D, A, 9, 21, 0xeb86d391); + + /* Add the starting values of the context. */ + A += A_save; + B += B_save; + C += C_save; + D += D_save; + } + + /* Put checksum in context given as argument. */ + ctx->A = A; + ctx->B = B; + ctx->C = C; + ctx->D = D; +} diff --git a/jni/vnc/LibVNCServer-0.9.9/common/md5.h b/jni/vnc/LibVNCServer-0.9.9/common/md5.h new file mode 100644 index 0000000..b48545b --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/md5.h @@ -0,0 +1,148 @@ +/* Declaration of functions and data types used for MD5 sum computing + library functions. + Copyright (C) 1995-1997,1999,2000,2001,2004,2005 + Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#ifndef _MD5_H +#define _MD5_H 1 + +#include + +#if defined HAVE_LIMITS_H || _LIBC +# include +#endif + +#define MD5_DIGEST_SIZE 16 +#define MD5_BLOCK_SIZE 64 + +/* The following contortions are an attempt to use the C preprocessor + to determine an unsigned integral type that is 32 bits wide. An + alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but + doing that would require that the configure script compile and *run* + the resulting executable. Locally running cross-compiled executables + is usually not possible. */ + +#ifdef _LIBC +# include +typedef uint32_t md5_uint32; +typedef uintptr_t md5_uintptr; +#else +# if defined __STDC__ && __STDC__ +# define UINT_MAX_32_BITS 4294967295U +# else +# define UINT_MAX_32_BITS 0xFFFFFFFF +# endif + +/* If UINT_MAX isn't defined, assume it's a 32-bit type. + This should be valid for all systems GNU cares about because + that doesn't include 16-bit systems, and only modern systems + (that certainly have ) have 64+-bit integral types. */ + +# ifndef UINT_MAX +# define UINT_MAX UINT_MAX_32_BITS +# endif + +# if UINT_MAX == UINT_MAX_32_BITS + typedef unsigned int md5_uint32; +# else +# if USHRT_MAX == UINT_MAX_32_BITS + typedef unsigned short md5_uint32; +# else +# if ULONG_MAX == UINT_MAX_32_BITS + typedef unsigned long md5_uint32; +# else + /* The following line is intended to evoke an error. + Using #error is not portable enough. */ + "Cannot determine unsigned 32-bit data type." +# endif +# endif +# endif +/* We have to make a guess about the integer type equivalent in size + to pointers which should always be correct. */ +typedef unsigned long int md5_uintptr; +#endif + +/* Structure to save state of computation between the single steps. */ +struct md5_ctx +{ + md5_uint32 A; + md5_uint32 B; + md5_uint32 C; + md5_uint32 D; + + md5_uint32 total[2]; + md5_uint32 buflen; + char buffer[128] __attribute__ ((__aligned__ (__alignof__ (md5_uint32)))); +}; + +/* + * The following three functions are build up the low level used in + * the functions `md5_stream' and `md5_buffer'. + */ + +/* Initialize structure containing state of computation. + (RFC 1321, 3.3: Step 3) */ +extern void __md5_init_ctx (struct md5_ctx *ctx) __THROW; + +/* Starting with the result of former calls of this function (or the + initialization function update the context for the next LEN bytes + starting at BUFFER. + It is necessary that LEN is a multiple of 64!!! */ +extern void __md5_process_block (const void *buffer, size_t len, + struct md5_ctx *ctx) __THROW; + +/* Starting with the result of former calls of this function (or the + initialization function update the context for the next LEN bytes + starting at BUFFER. + It is NOT required that LEN is a multiple of 64. */ +extern void __md5_process_bytes (const void *buffer, size_t len, + struct md5_ctx *ctx) __THROW; + +/* Process the remaining bytes in the buffer and put result from CTX + in first 16 bytes following RESBUF. The result is always in little + endian byte order, so that a byte-wise output yields to the wanted + ASCII representation of the message digest. + + IMPORTANT: On some systems it is required that RESBUF is correctly + aligned for a 32 bits value. */ +extern void *__md5_finish_ctx (struct md5_ctx *ctx, void *resbuf) __THROW; + + +/* Put result from CTX in first 16 bytes following RESBUF. The result is + always in little endian byte order, so that a byte-wise output yields + to the wanted ASCII representation of the message digest. + + IMPORTANT: On some systems it is required that RESBUF is correctly + aligned for a 32 bits value. */ +extern void *__md5_read_ctx (const struct md5_ctx *ctx, void *resbuf) __THROW; + + +/* Compute MD5 message digest for bytes read from STREAM. The + resulting message digest number will be written into the 16 bytes + beginning at RESBLOCK. */ +extern int __md5_stream (FILE *stream, void *resblock) __THROW; + +/* Compute MD5 message digest for LEN bytes beginning at BUFFER. The + result is always in little endian byte order, so that a byte-wise + output yields to the wanted ASCII representation of the message + digest. */ +extern void *__md5_buffer (const char *buffer, size_t len, + void *resblock) __THROW; + +#endif /* md5.h */ diff --git a/jni/vnc/LibVNCServer-0.9.9/common/minilzo.c b/jni/vnc/LibVNCServer-0.9.9/common/minilzo.c new file mode 100644 index 0000000..6ae8d73 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/minilzo.c @@ -0,0 +1,4192 @@ +/* minilzo.c -- mini subset of the LZO real-time data compression library + + This file is part of the LZO real-time data compression library. + + Copyright (C) 2010 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2009 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2008 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2007 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2006 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2005 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2004 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2003 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2002 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2001 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2000 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1999 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1998 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1997 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1996 Markus Franz Xaver Johannes Oberhumer + All Rights Reserved. + + The LZO library is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of + the License, or (at your option) any later version. + + The LZO library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with the LZO library; see the file COPYING. + If not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + Markus F.X.J. Oberhumer + + http://www.oberhumer.com/opensource/lzo/ + */ + +/* + * NOTE: + * the full LZO package can be found at + * http://www.oberhumer.com/opensource/lzo/ + */ + +#define __LZO_IN_MINILZO 1 + +#if defined(LZO_CFG_FREESTANDING) +# undef MINILZO_HAVE_CONFIG_H +# define LZO_LIBC_FREESTANDING 1 +# define LZO_OS_FREESTANDING 1 +#endif + +#ifdef MINILZO_HAVE_CONFIG_H +# include +#endif +#include +#include +#if defined(MINILZO_CFG_USE_INTERNAL_LZODEFS) + +#ifndef __LZODEFS_H_INCLUDED +#define __LZODEFS_H_INCLUDED 1 + +#if defined(__CYGWIN32__) && !defined(__CYGWIN__) +# define __CYGWIN__ __CYGWIN32__ +#endif +#if defined(__IBMCPP__) && !defined(__IBMC__) +# define __IBMC__ __IBMCPP__ +#endif +#if defined(__ICL) && defined(_WIN32) && !defined(__INTEL_COMPILER) +# define __INTEL_COMPILER __ICL +#endif +#if 1 && defined(__INTERIX) && defined(__GNUC__) && !defined(_ALL_SOURCE) +# define _ALL_SOURCE 1 +#endif +#if defined(__mips__) && defined(__R5900__) +# if !defined(__LONG_MAX__) +# define __LONG_MAX__ 9223372036854775807L +# endif +#endif +#if defined(__INTEL_COMPILER) && defined(__linux__) +# pragma warning(disable: 193) +#endif +#if defined(__KEIL__) && defined(__C166__) +# pragma warning disable = 322 +#elif 0 && defined(__C251__) +# pragma warning disable = 322 +#endif +#if defined(_MSC_VER) && !defined(__INTEL_COMPILER) && !defined(__MWERKS__) +# if (_MSC_VER >= 1300) +# pragma warning(disable: 4668) +# endif +#endif +#if 0 && defined(__WATCOMC__) +# if (__WATCOMC__ >= 1050) && (__WATCOMC__ < 1060) +# pragma warning 203 9 +# endif +#endif +#if defined(__BORLANDC__) && defined(__MSDOS__) && !defined(__FLAT__) +# pragma option -h +#endif +#if 0 +#define LZO_0xffffL 0xfffful +#define LZO_0xffffffffL 0xfffffffful +#else +#define LZO_0xffffL 65535ul +#define LZO_0xffffffffL 4294967295ul +#endif +#if (LZO_0xffffL == LZO_0xffffffffL) +# error "your preprocessor is broken 1" +#endif +#if (16ul * 16384ul != 262144ul) +# error "your preprocessor is broken 2" +#endif +#if 0 +#if (32767 >= 4294967295ul) +# error "your preprocessor is broken 3" +#endif +#if (65535u >= 4294967295ul) +# error "your preprocessor is broken 4" +#endif +#endif +#if (UINT_MAX == LZO_0xffffL) +#if defined(__ZTC__) && defined(__I86__) && !defined(__OS2__) +# if !defined(MSDOS) +# define MSDOS 1 +# endif +# if !defined(_MSDOS) +# define _MSDOS 1 +# endif +#elif 0 && defined(__VERSION) && defined(MB_LEN_MAX) +# if (__VERSION == 520) && (MB_LEN_MAX == 1) +# if !defined(__AZTEC_C__) +# define __AZTEC_C__ __VERSION +# endif +# if !defined(__DOS__) +# define __DOS__ 1 +# endif +# endif +#endif +#endif +#if defined(_MSC_VER) && defined(M_I86HM) && (UINT_MAX == LZO_0xffffL) +# define ptrdiff_t long +# define _PTRDIFF_T_DEFINED 1 +#endif +#if (UINT_MAX == LZO_0xffffL) +# undef __LZO_RENAME_A +# undef __LZO_RENAME_B +# if defined(__AZTEC_C__) && defined(__DOS__) +# define __LZO_RENAME_A 1 +# elif defined(_MSC_VER) && defined(MSDOS) +# if (_MSC_VER < 600) +# define __LZO_RENAME_A 1 +# elif (_MSC_VER < 700) +# define __LZO_RENAME_B 1 +# endif +# elif defined(__TSC__) && defined(__OS2__) +# define __LZO_RENAME_A 1 +# elif defined(__MSDOS__) && defined(__TURBOC__) && (__TURBOC__ < 0x0410) +# define __LZO_RENAME_A 1 +# elif defined(__PACIFIC__) && defined(DOS) +# if !defined(__far) +# define __far far +# endif +# if !defined(__near) +# define __near near +# endif +# endif +# if defined(__LZO_RENAME_A) +# if !defined(__cdecl) +# define __cdecl cdecl +# endif +# if !defined(__far) +# define __far far +# endif +# if !defined(__huge) +# define __huge huge +# endif +# if !defined(__near) +# define __near near +# endif +# if !defined(__pascal) +# define __pascal pascal +# endif +# if !defined(__huge) +# define __huge huge +# endif +# elif defined(__LZO_RENAME_B) +# if !defined(__cdecl) +# define __cdecl _cdecl +# endif +# if !defined(__far) +# define __far _far +# endif +# if !defined(__huge) +# define __huge _huge +# endif +# if !defined(__near) +# define __near _near +# endif +# if !defined(__pascal) +# define __pascal _pascal +# endif +# elif (defined(__PUREC__) || defined(__TURBOC__)) && defined(__TOS__) +# if !defined(__cdecl) +# define __cdecl cdecl +# endif +# if !defined(__pascal) +# define __pascal pascal +# endif +# endif +# undef __LZO_RENAME_A +# undef __LZO_RENAME_B +#endif +#if (UINT_MAX == LZO_0xffffL) +#if defined(__AZTEC_C__) && defined(__DOS__) +# define LZO_BROKEN_CDECL_ALT_SYNTAX 1 +#elif defined(_MSC_VER) && defined(MSDOS) +# if (_MSC_VER < 600) +# define LZO_BROKEN_INTEGRAL_CONSTANTS 1 +# endif +# if (_MSC_VER < 700) +# define LZO_BROKEN_INTEGRAL_PROMOTION 1 +# define LZO_BROKEN_SIZEOF 1 +# endif +#elif defined(__PACIFIC__) && defined(DOS) +# define LZO_BROKEN_INTEGRAL_CONSTANTS 1 +#elif defined(__TURBOC__) && defined(__MSDOS__) +# if (__TURBOC__ < 0x0150) +# define LZO_BROKEN_CDECL_ALT_SYNTAX 1 +# define LZO_BROKEN_INTEGRAL_CONSTANTS 1 +# define LZO_BROKEN_INTEGRAL_PROMOTION 1 +# endif +# if (__TURBOC__ < 0x0200) +# define LZO_BROKEN_SIZEOF 1 +# endif +# if (__TURBOC__ < 0x0400) && defined(__cplusplus) +# define LZO_BROKEN_CDECL_ALT_SYNTAX 1 +# endif +#elif (defined(__PUREC__) || defined(__TURBOC__)) && defined(__TOS__) +# define LZO_BROKEN_CDECL_ALT_SYNTAX 1 +# define LZO_BROKEN_SIZEOF 1 +#endif +#endif +#if defined(__WATCOMC__) && (__WATCOMC__ < 900) +# define LZO_BROKEN_INTEGRAL_CONSTANTS 1 +#endif +#if defined(_CRAY) && defined(_CRAY1) +# define LZO_BROKEN_SIGNED_RIGHT_SHIFT 1 +#endif +#define LZO_PP_STRINGIZE(x) #x +#define LZO_PP_MACRO_EXPAND(x) LZO_PP_STRINGIZE(x) +#define LZO_PP_CONCAT2(a,b) a ## b +#define LZO_PP_CONCAT3(a,b,c) a ## b ## c +#define LZO_PP_CONCAT4(a,b,c,d) a ## b ## c ## d +#define LZO_PP_CONCAT5(a,b,c,d,e) a ## b ## c ## d ## e +#define LZO_PP_ECONCAT2(a,b) LZO_PP_CONCAT2(a,b) +#define LZO_PP_ECONCAT3(a,b,c) LZO_PP_CONCAT3(a,b,c) +#define LZO_PP_ECONCAT4(a,b,c,d) LZO_PP_CONCAT4(a,b,c,d) +#define LZO_PP_ECONCAT5(a,b,c,d,e) LZO_PP_CONCAT5(a,b,c,d,e) +#if 1 +#define LZO_CPP_STRINGIZE(x) #x +#define LZO_CPP_MACRO_EXPAND(x) LZO_CPP_STRINGIZE(x) +#define LZO_CPP_CONCAT2(a,b) a ## b +#define LZO_CPP_CONCAT3(a,b,c) a ## b ## c +#define LZO_CPP_CONCAT4(a,b,c,d) a ## b ## c ## d +#define LZO_CPP_CONCAT5(a,b,c,d,e) a ## b ## c ## d ## e +#define LZO_CPP_ECONCAT2(a,b) LZO_CPP_CONCAT2(a,b) +#define LZO_CPP_ECONCAT3(a,b,c) LZO_CPP_CONCAT3(a,b,c) +#define LZO_CPP_ECONCAT4(a,b,c,d) LZO_CPP_CONCAT4(a,b,c,d) +#define LZO_CPP_ECONCAT5(a,b,c,d,e) LZO_CPP_CONCAT5(a,b,c,d,e) +#endif +#define __LZO_MASK_GEN(o,b) (((((o) << ((b)-1)) - (o)) << 1) + (o)) +#if 1 && defined(__cplusplus) +# if !defined(__STDC_CONSTANT_MACROS) +# define __STDC_CONSTANT_MACROS 1 +# endif +# if !defined(__STDC_LIMIT_MACROS) +# define __STDC_LIMIT_MACROS 1 +# endif +#endif +#if defined(__cplusplus) +# define LZO_EXTERN_C extern "C" +#else +# define LZO_EXTERN_C extern +#endif +#if !defined(__LZO_OS_OVERRIDE) +#if (LZO_OS_FREESTANDING) +# define LZO_INFO_OS "freestanding" +#elif (LZO_OS_EMBEDDED) +# define LZO_INFO_OS "embedded" +#elif 1 && defined(__IAR_SYSTEMS_ICC__) +# define LZO_OS_EMBEDDED 1 +# define LZO_INFO_OS "embedded" +#elif defined(__CYGWIN__) && defined(__GNUC__) +# define LZO_OS_CYGWIN 1 +# define LZO_INFO_OS "cygwin" +#elif defined(__EMX__) && defined(__GNUC__) +# define LZO_OS_EMX 1 +# define LZO_INFO_OS "emx" +#elif defined(__BEOS__) +# define LZO_OS_BEOS 1 +# define LZO_INFO_OS "beos" +#elif defined(__Lynx__) +# define LZO_OS_LYNXOS 1 +# define LZO_INFO_OS "lynxos" +#elif defined(__OS400__) +# define LZO_OS_OS400 1 +# define LZO_INFO_OS "os400" +#elif defined(__QNX__) +# define LZO_OS_QNX 1 +# define LZO_INFO_OS "qnx" +#elif defined(__BORLANDC__) && defined(__DPMI32__) && (__BORLANDC__ >= 0x0460) +# define LZO_OS_DOS32 1 +# define LZO_INFO_OS "dos32" +#elif defined(__BORLANDC__) && defined(__DPMI16__) +# define LZO_OS_DOS16 1 +# define LZO_INFO_OS "dos16" +#elif defined(__ZTC__) && defined(DOS386) +# define LZO_OS_DOS32 1 +# define LZO_INFO_OS "dos32" +#elif defined(__OS2__) || defined(__OS2V2__) +# if (UINT_MAX == LZO_0xffffL) +# define LZO_OS_OS216 1 +# define LZO_INFO_OS "os216" +# elif (UINT_MAX == LZO_0xffffffffL) +# define LZO_OS_OS2 1 +# define LZO_INFO_OS "os2" +# else +# error "check your limits.h header" +# endif +#elif defined(__WIN64__) || defined(_WIN64) || defined(WIN64) +# define LZO_OS_WIN64 1 +# define LZO_INFO_OS "win64" +#elif defined(__WIN32__) || defined(_WIN32) || defined(WIN32) || defined(__WINDOWS_386__) +# define LZO_OS_WIN32 1 +# define LZO_INFO_OS "win32" +#elif defined(__MWERKS__) && defined(__INTEL__) +# define LZO_OS_WIN32 1 +# define LZO_INFO_OS "win32" +#elif defined(__WINDOWS__) || defined(_WINDOWS) || defined(_Windows) +# if (UINT_MAX == LZO_0xffffL) +# define LZO_OS_WIN16 1 +# define LZO_INFO_OS "win16" +# elif (UINT_MAX == LZO_0xffffffffL) +# define LZO_OS_WIN32 1 +# define LZO_INFO_OS "win32" +# else +# error "check your limits.h header" +# endif +#elif defined(__DOS__) || defined(__MSDOS__) || defined(_MSDOS) || defined(MSDOS) || (defined(__PACIFIC__) && defined(DOS)) +# if (UINT_MAX == LZO_0xffffL) +# define LZO_OS_DOS16 1 +# define LZO_INFO_OS "dos16" +# elif (UINT_MAX == LZO_0xffffffffL) +# define LZO_OS_DOS32 1 +# define LZO_INFO_OS "dos32" +# else +# error "check your limits.h header" +# endif +#elif defined(__WATCOMC__) +# if defined(__NT__) && (UINT_MAX == LZO_0xffffL) +# define LZO_OS_DOS16 1 +# define LZO_INFO_OS "dos16" +# elif defined(__NT__) && (__WATCOMC__ < 1100) +# define LZO_OS_WIN32 1 +# define LZO_INFO_OS "win32" +# elif defined(__linux__) || defined(__LINUX__) +# define LZO_OS_POSIX 1 +# define LZO_INFO_OS "posix" +# else +# error "please specify a target using the -bt compiler option" +# endif +#elif defined(__palmos__) +# define LZO_OS_PALMOS 1 +# define LZO_INFO_OS "palmos" +#elif defined(__TOS__) || defined(__atarist__) +# define LZO_OS_TOS 1 +# define LZO_INFO_OS "tos" +#elif defined(macintosh) && !defined(__ppc__) +# define LZO_OS_MACCLASSIC 1 +# define LZO_INFO_OS "macclassic" +#elif defined(__VMS) +# define LZO_OS_VMS 1 +# define LZO_INFO_OS "vms" +#elif ((defined(__mips__) && defined(__R5900__)) || defined(__MIPS_PSX2__)) +# define LZO_OS_CONSOLE 1 +# define LZO_OS_CONSOLE_PS2 1 +# define LZO_INFO_OS "console" +# define LZO_INFO_OS_CONSOLE "ps2" +#elif (defined(__mips__) && defined(__psp__)) +# define LZO_OS_CONSOLE 1 +# define LZO_OS_CONSOLE_PSP 1 +# define LZO_INFO_OS "console" +# define LZO_INFO_OS_CONSOLE "psp" +#else +# define LZO_OS_POSIX 1 +# define LZO_INFO_OS "posix" +#endif +#if (LZO_OS_POSIX) +# if defined(_AIX) || defined(__AIX__) || defined(__aix__) +# define LZO_OS_POSIX_AIX 1 +# define LZO_INFO_OS_POSIX "aix" +# elif defined(__FreeBSD__) +# define LZO_OS_POSIX_FREEBSD 1 +# define LZO_INFO_OS_POSIX "freebsd" +# elif defined(__hpux__) || defined(__hpux) +# define LZO_OS_POSIX_HPUX 1 +# define LZO_INFO_OS_POSIX "hpux" +# elif defined(__INTERIX) +# define LZO_OS_POSIX_INTERIX 1 +# define LZO_INFO_OS_POSIX "interix" +# elif defined(__IRIX__) || defined(__irix__) +# define LZO_OS_POSIX_IRIX 1 +# define LZO_INFO_OS_POSIX "irix" +# elif defined(__linux__) || defined(__linux) || defined(__LINUX__) +# define LZO_OS_POSIX_LINUX 1 +# define LZO_INFO_OS_POSIX "linux" +# elif defined(__APPLE__) || defined(__MACOS__) +# define LZO_OS_POSIX_MACOSX 1 +# define LZO_INFO_OS_POSIX "macosx" +# elif defined(__minix__) || defined(__minix) +# define LZO_OS_POSIX_MINIX 1 +# define LZO_INFO_OS_POSIX "minix" +# elif defined(__NetBSD__) +# define LZO_OS_POSIX_NETBSD 1 +# define LZO_INFO_OS_POSIX "netbsd" +# elif defined(__OpenBSD__) +# define LZO_OS_POSIX_OPENBSD 1 +# define LZO_INFO_OS_POSIX "openbsd" +# elif defined(__osf__) +# define LZO_OS_POSIX_OSF 1 +# define LZO_INFO_OS_POSIX "osf" +# elif defined(__solaris__) || defined(__sun) +# if defined(__SVR4) || defined(__svr4__) +# define LZO_OS_POSIX_SOLARIS 1 +# define LZO_INFO_OS_POSIX "solaris" +# else +# define LZO_OS_POSIX_SUNOS 1 +# define LZO_INFO_OS_POSIX "sunos" +# endif +# elif defined(__ultrix__) || defined(__ultrix) +# define LZO_OS_POSIX_ULTRIX 1 +# define LZO_INFO_OS_POSIX "ultrix" +# elif defined(_UNICOS) +# define LZO_OS_POSIX_UNICOS 1 +# define LZO_INFO_OS_POSIX "unicos" +# else +# define LZO_OS_POSIX_UNKNOWN 1 +# define LZO_INFO_OS_POSIX "unknown" +# endif +#endif +#endif +#if (LZO_OS_DOS16 || LZO_OS_OS216 || LZO_OS_WIN16) +# if (UINT_MAX != LZO_0xffffL) +# error "this should not happen" +# endif +# if (ULONG_MAX != LZO_0xffffffffL) +# error "this should not happen" +# endif +#endif +#if (LZO_OS_DOS32 || LZO_OS_OS2 || LZO_OS_WIN32 || LZO_OS_WIN64) +# if (UINT_MAX != LZO_0xffffffffL) +# error "this should not happen" +# endif +# if (ULONG_MAX != LZO_0xffffffffL) +# error "this should not happen" +# endif +#endif +#if defined(CIL) && defined(_GNUCC) && defined(__GNUC__) +# define LZO_CC_CILLY 1 +# define LZO_INFO_CC "Cilly" +# if defined(__CILLY__) +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__CILLY__) +# else +# define LZO_INFO_CCVER "unknown" +# endif +#elif 0 && defined(SDCC) && defined(__VERSION__) && !defined(__GNUC__) +# define LZO_CC_SDCC 1 +# define LZO_INFO_CC "sdcc" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(SDCC) +#elif defined(__PATHSCALE__) && defined(__PATHCC_PATCHLEVEL__) +# define LZO_CC_PATHSCALE (__PATHCC__ * 0x10000L + __PATHCC_MINOR__ * 0x100 + __PATHCC_PATCHLEVEL__) +# define LZO_INFO_CC "Pathscale C" +# define LZO_INFO_CCVER __PATHSCALE__ +#elif defined(__INTEL_COMPILER) +# define LZO_CC_INTELC 1 +# define LZO_INFO_CC "Intel C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__INTEL_COMPILER) +# if defined(_WIN32) || defined(_WIN64) +# define LZO_CC_SYNTAX_MSC 1 +# else +# define LZO_CC_SYNTAX_GNUC 1 +# endif +#elif defined(__POCC__) && defined(_WIN32) +# define LZO_CC_PELLESC 1 +# define LZO_INFO_CC "Pelles C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__POCC__) +#elif defined(__clang__) && defined(__llvm__) && defined(__GNUC__) && defined(__GNUC_MINOR__) && defined(__VERSION__) +# if defined(__GNUC_PATCHLEVEL__) +# define LZO_CC_CLANG_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100 + __GNUC_PATCHLEVEL__) +# else +# define LZO_CC_CLANG_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100) +# endif +# if defined(__clang_major__) && defined(__clang_minor__) && defined(__clang_patchlevel__) +# define LZO_CC_CLANG_CLANG (__clang_major__ * 0x10000L + __clang_minor__ * 0x100 + __clang_patchlevel__) +# else +# define LZO_CC_CLANG_CLANG 0x020700L +# endif +# define LZO_CC_CLANG LZO_CC_CLANG_GNUC +# define LZO_INFO_CC "clang" +# define LZO_INFO_CCVER __VERSION__ +#elif defined(__llvm__) && defined(__GNUC__) && defined(__GNUC_MINOR__) && defined(__VERSION__) +# if defined(__GNUC_PATCHLEVEL__) +# define LZO_CC_LLVM_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100 + __GNUC_PATCHLEVEL__) +# else +# define LZO_CC_LLVM_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100) +# endif +# define LZO_CC_LLVM LZO_CC_LLVM_GNUC +# define LZO_INFO_CC "llvm-gcc" +# define LZO_INFO_CCVER __VERSION__ +#elif defined(__GNUC__) && defined(__VERSION__) +# if defined(__GNUC_MINOR__) && defined(__GNUC_PATCHLEVEL__) +# define LZO_CC_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100 + __GNUC_PATCHLEVEL__) +# elif defined(__GNUC_MINOR__) +# define LZO_CC_GNUC (__GNUC__ * 0x10000L + __GNUC_MINOR__ * 0x100) +# else +# define LZO_CC_GNUC (__GNUC__ * 0x10000L) +# endif +# define LZO_INFO_CC "gcc" +# define LZO_INFO_CCVER __VERSION__ +#elif defined(__ACK__) && defined(_ACK) +# define LZO_CC_ACK 1 +# define LZO_INFO_CC "Amsterdam Compiler Kit C" +# define LZO_INFO_CCVER "unknown" +#elif defined(__AZTEC_C__) +# define LZO_CC_AZTECC 1 +# define LZO_INFO_CC "Aztec C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__AZTEC_C__) +#elif defined(__CODEGEARC__) +# define LZO_CC_CODEGEARC 1 +# define LZO_INFO_CC "CodeGear C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__CODEGEARC__) +#elif defined(__BORLANDC__) +# define LZO_CC_BORLANDC 1 +# define LZO_INFO_CC "Borland C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__BORLANDC__) +#elif defined(_CRAYC) && defined(_RELEASE) +# define LZO_CC_CRAYC 1 +# define LZO_INFO_CC "Cray C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(_RELEASE) +#elif defined(__DMC__) && defined(__SC__) +# define LZO_CC_DMC 1 +# define LZO_INFO_CC "Digital Mars C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__DMC__) +#elif defined(__DECC) +# define LZO_CC_DECC 1 +# define LZO_INFO_CC "DEC C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__DECC) +#elif defined(__HIGHC__) +# define LZO_CC_HIGHC 1 +# define LZO_INFO_CC "MetaWare High C" +# define LZO_INFO_CCVER "unknown" +#elif defined(__IAR_SYSTEMS_ICC__) +# define LZO_CC_IARC 1 +# define LZO_INFO_CC "IAR C" +# if defined(__VER__) +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__VER__) +# else +# define LZO_INFO_CCVER "unknown" +# endif +#elif defined(__IBMC__) +# define LZO_CC_IBMC 1 +# define LZO_INFO_CC "IBM C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__IBMC__) +#elif defined(__KEIL__) && defined(__C166__) +# define LZO_CC_KEILC 1 +# define LZO_INFO_CC "Keil C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__C166__) +#elif defined(__LCC__) && defined(_WIN32) && defined(__LCCOPTIMLEVEL) +# define LZO_CC_LCCWIN32 1 +# define LZO_INFO_CC "lcc-win32" +# define LZO_INFO_CCVER "unknown" +#elif defined(__LCC__) +# define LZO_CC_LCC 1 +# define LZO_INFO_CC "lcc" +# if defined(__LCC_VERSION__) +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__LCC_VERSION__) +# else +# define LZO_INFO_CCVER "unknown" +# endif +#elif defined(_MSC_VER) +# define LZO_CC_MSC 1 +# define LZO_INFO_CC "Microsoft C" +# if defined(_MSC_FULL_VER) +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(_MSC_VER) "." LZO_PP_MACRO_EXPAND(_MSC_FULL_VER) +# else +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(_MSC_VER) +# endif +#elif defined(__MWERKS__) +# define LZO_CC_MWERKS 1 +# define LZO_INFO_CC "Metrowerks C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__MWERKS__) +#elif (defined(__NDPC__) || defined(__NDPX__)) && defined(__i386) +# define LZO_CC_NDPC 1 +# define LZO_INFO_CC "Microway NDP C" +# define LZO_INFO_CCVER "unknown" +#elif defined(__PACIFIC__) +# define LZO_CC_PACIFICC 1 +# define LZO_INFO_CC "Pacific C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__PACIFIC__) +#elif defined(__PGI) && (defined(__linux__) || defined(__WIN32__)) +# define LZO_CC_PGI 1 +# define LZO_INFO_CC "Portland Group PGI C" +# define LZO_INFO_CCVER "unknown" +#elif defined(__PUREC__) && defined(__TOS__) +# define LZO_CC_PUREC 1 +# define LZO_INFO_CC "Pure C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__PUREC__) +#elif defined(__SC__) && defined(__ZTC__) +# define LZO_CC_SYMANTECC 1 +# define LZO_INFO_CC "Symantec C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__SC__) +#elif defined(__SUNPRO_C) +# define LZO_INFO_CC "SunPro C" +# if ((__SUNPRO_C)+0 > 0) +# define LZO_CC_SUNPROC __SUNPRO_C +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__SUNPRO_C) +# else +# define LZO_CC_SUNPROC 1 +# define LZO_INFO_CCVER "unknown" +# endif +#elif defined(__SUNPRO_CC) +# define LZO_INFO_CC "SunPro C" +# if ((__SUNPRO_CC)+0 > 0) +# define LZO_CC_SUNPROC __SUNPRO_CC +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__SUNPRO_CC) +# else +# define LZO_CC_SUNPROC 1 +# define LZO_INFO_CCVER "unknown" +# endif +#elif defined(__TINYC__) +# define LZO_CC_TINYC 1 +# define LZO_INFO_CC "Tiny C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__TINYC__) +#elif defined(__TSC__) +# define LZO_CC_TOPSPEEDC 1 +# define LZO_INFO_CC "TopSpeed C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__TSC__) +#elif defined(__WATCOMC__) +# define LZO_CC_WATCOMC 1 +# define LZO_INFO_CC "Watcom C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__WATCOMC__) +#elif defined(__TURBOC__) +# define LZO_CC_TURBOC 1 +# define LZO_INFO_CC "Turbo C" +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__TURBOC__) +#elif defined(__ZTC__) +# define LZO_CC_ZORTECHC 1 +# define LZO_INFO_CC "Zortech C" +# if (__ZTC__ == 0x310) +# define LZO_INFO_CCVER "0x310" +# else +# define LZO_INFO_CCVER LZO_PP_MACRO_EXPAND(__ZTC__) +# endif +#else +# define LZO_CC_UNKNOWN 1 +# define LZO_INFO_CC "unknown" +# define LZO_INFO_CCVER "unknown" +#endif +#if 0 && (LZO_CC_MSC && (_MSC_VER >= 1200)) && !defined(_MSC_FULL_VER) +# error "LZO_CC_MSC: _MSC_FULL_VER is not defined" +#endif +#if !defined(__LZO_ARCH_OVERRIDE) && !(LZO_ARCH_GENERIC) && defined(_CRAY) +# if (UINT_MAX > LZO_0xffffffffL) && defined(_CRAY) +# if defined(_CRAYMPP) || defined(_CRAYT3D) || defined(_CRAYT3E) +# define LZO_ARCH_CRAY_MPP 1 +# elif defined(_CRAY1) +# define LZO_ARCH_CRAY_PVP 1 +# endif +# endif +#endif +#if !defined(__LZO_ARCH_OVERRIDE) +#if (LZO_ARCH_GENERIC) +# define LZO_INFO_ARCH "generic" +#elif (LZO_OS_DOS16 || LZO_OS_OS216 || LZO_OS_WIN16) +# define LZO_ARCH_I086 1 +# define LZO_ARCH_IA16 1 +# define LZO_INFO_ARCH "i086" +#elif defined(__alpha__) || defined(__alpha) || defined(_M_ALPHA) +# define LZO_ARCH_ALPHA 1 +# define LZO_INFO_ARCH "alpha" +#elif (LZO_ARCH_CRAY_MPP) && (defined(_CRAYT3D) || defined(_CRAYT3E)) +# define LZO_ARCH_ALPHA 1 +# define LZO_INFO_ARCH "alpha" +#elif defined(__amd64__) || defined(__x86_64__) || defined(_M_AMD64) +# define LZO_ARCH_AMD64 1 +# define LZO_INFO_ARCH "amd64" +#elif defined(__thumb__) || (defined(_M_ARM) && defined(_M_THUMB)) +# define LZO_ARCH_ARM 1 +# define LZO_ARCH_ARM_THUMB 1 +# define LZO_INFO_ARCH "arm_thumb" +#elif defined(__IAR_SYSTEMS_ICC__) && defined(__ICCARM__) +# define LZO_ARCH_ARM 1 +# if defined(__CPU_MODE__) && ((__CPU_MODE__)+0 == 1) +# define LZO_ARCH_ARM_THUMB 1 +# define LZO_INFO_ARCH "arm_thumb" +# elif defined(__CPU_MODE__) && ((__CPU_MODE__)+0 == 2) +# define LZO_INFO_ARCH "arm" +# else +# define LZO_INFO_ARCH "arm" +# endif +#elif defined(__arm__) || defined(_M_ARM) +# define LZO_ARCH_ARM 1 +# define LZO_INFO_ARCH "arm" +#elif (UINT_MAX <= LZO_0xffffL) && defined(__AVR__) +# define LZO_ARCH_AVR 1 +# define LZO_INFO_ARCH "avr" +#elif defined(__avr32__) || defined(__AVR32__) +# define LZO_ARCH_AVR32 1 +# define LZO_INFO_ARCH "avr32" +#elif defined(__bfin__) +# define LZO_ARCH_BLACKFIN 1 +# define LZO_INFO_ARCH "blackfin" +#elif (UINT_MAX == LZO_0xffffL) && defined(__C166__) +# define LZO_ARCH_C166 1 +# define LZO_INFO_ARCH "c166" +#elif defined(__cris__) +# define LZO_ARCH_CRIS 1 +# define LZO_INFO_ARCH "cris" +#elif defined(__IAR_SYSTEMS_ICC__) && defined(__ICCEZ80__) +# define LZO_ARCH_EZ80 1 +# define LZO_INFO_ARCH "ez80" +#elif defined(__H8300__) || defined(__H8300H__) || defined(__H8300S__) || defined(__H8300SX__) +# define LZO_ARCH_H8300 1 +# define LZO_INFO_ARCH "h8300" +#elif defined(__hppa__) || defined(__hppa) +# define LZO_ARCH_HPPA 1 +# define LZO_INFO_ARCH "hppa" +#elif defined(__386__) || defined(__i386__) || defined(__i386) || defined(_M_IX86) || defined(_M_I386) +# define LZO_ARCH_I386 1 +# define LZO_ARCH_IA32 1 +# define LZO_INFO_ARCH "i386" +#elif (LZO_CC_ZORTECHC && defined(__I86__)) +# define LZO_ARCH_I386 1 +# define LZO_ARCH_IA32 1 +# define LZO_INFO_ARCH "i386" +#elif (LZO_OS_DOS32 && LZO_CC_HIGHC) && defined(_I386) +# define LZO_ARCH_I386 1 +# define LZO_ARCH_IA32 1 +# define LZO_INFO_ARCH "i386" +#elif defined(__ia64__) || defined(__ia64) || defined(_M_IA64) +# define LZO_ARCH_IA64 1 +# define LZO_INFO_ARCH "ia64" +#elif (UINT_MAX == LZO_0xffffL) && defined(__m32c__) +# define LZO_ARCH_M16C 1 +# define LZO_INFO_ARCH "m16c" +#elif defined(__IAR_SYSTEMS_ICC__) && defined(__ICCM16C__) +# define LZO_ARCH_M16C 1 +# define LZO_INFO_ARCH "m16c" +#elif defined(__m32r__) +# define LZO_ARCH_M32R 1 +# define LZO_INFO_ARCH "m32r" +#elif (LZO_OS_TOS) || defined(__m68k__) || defined(__m68000__) || defined(__mc68000__) || defined(__mc68020__) || defined(_M_M68K) +# define LZO_ARCH_M68K 1 +# define LZO_INFO_ARCH "m68k" +#elif (UINT_MAX == LZO_0xffffL) && defined(__C251__) +# define LZO_ARCH_MCS251 1 +# define LZO_INFO_ARCH "mcs251" +#elif (UINT_MAX == LZO_0xffffL) && defined(__C51__) +# define LZO_ARCH_MCS51 1 +# define LZO_INFO_ARCH "mcs51" +#elif defined(__IAR_SYSTEMS_ICC__) && defined(__ICC8051__) +# define LZO_ARCH_MCS51 1 +# define LZO_INFO_ARCH "mcs51" +#elif defined(__mips__) || defined(__mips) || defined(_MIPS_ARCH) || defined(_M_MRX000) +# define LZO_ARCH_MIPS 1 +# define LZO_INFO_ARCH "mips" +#elif (UINT_MAX == LZO_0xffffL) && defined(__MSP430__) +# define LZO_ARCH_MSP430 1 +# define LZO_INFO_ARCH "msp430" +#elif defined(__IAR_SYSTEMS_ICC__) && defined(__ICC430__) +# define LZO_ARCH_MSP430 1 +# define LZO_INFO_ARCH "msp430" +#elif defined(__powerpc__) || defined(__powerpc) || defined(__ppc__) || defined(__PPC__) || defined(_M_PPC) || defined(_ARCH_PPC) || defined(_ARCH_PWR) +# define LZO_ARCH_POWERPC 1 +# define LZO_INFO_ARCH "powerpc" +#elif defined(__s390__) || defined(__s390) || defined(__s390x__) || defined(__s390x) +# define LZO_ARCH_S390 1 +# define LZO_INFO_ARCH "s390" +#elif defined(__sh__) || defined(_M_SH) +# define LZO_ARCH_SH 1 +# define LZO_INFO_ARCH "sh" +#elif defined(__sparc__) || defined(__sparc) || defined(__sparcv8) +# define LZO_ARCH_SPARC 1 +# define LZO_INFO_ARCH "sparc" +#elif defined(__SPU__) +# define LZO_ARCH_SPU 1 +# define LZO_INFO_ARCH "spu" +#elif (UINT_MAX == LZO_0xffffL) && defined(__z80) +# define LZO_ARCH_Z80 1 +# define LZO_INFO_ARCH "z80" +#elif (LZO_ARCH_CRAY_PVP) +# if defined(_CRAYSV1) +# define LZO_ARCH_CRAY_SV1 1 +# define LZO_INFO_ARCH "cray_sv1" +# elif (_ADDR64) +# define LZO_ARCH_CRAY_T90 1 +# define LZO_INFO_ARCH "cray_t90" +# elif (_ADDR32) +# define LZO_ARCH_CRAY_YMP 1 +# define LZO_INFO_ARCH "cray_ymp" +# else +# define LZO_ARCH_CRAY_XMP 1 +# define LZO_INFO_ARCH "cray_xmp" +# endif +#else +# define LZO_ARCH_UNKNOWN 1 +# define LZO_INFO_ARCH "unknown" +#endif +#endif +#if 1 && (LZO_ARCH_UNKNOWN) && (LZO_OS_DOS32 || LZO_OS_OS2) +# error "FIXME - missing define for CPU architecture" +#endif +#if 1 && (LZO_ARCH_UNKNOWN) && (LZO_OS_WIN32) +# error "FIXME - missing WIN32 define for CPU architecture" +#endif +#if 1 && (LZO_ARCH_UNKNOWN) && (LZO_OS_WIN64) +# error "FIXME - missing WIN64 define for CPU architecture" +#endif +#if (LZO_OS_OS216 || LZO_OS_WIN16) +# define LZO_ARCH_I086PM 1 +# define LZO_ARCH_IA16PM 1 +#elif 1 && (LZO_OS_DOS16 && defined(BLX286)) +# define LZO_ARCH_I086PM 1 +# define LZO_ARCH_IA16PM 1 +#elif 1 && (LZO_OS_DOS16 && defined(DOSX286)) +# define LZO_ARCH_I086PM 1 +# define LZO_ARCH_IA16PM 1 +#elif 1 && (LZO_OS_DOS16 && LZO_CC_BORLANDC && defined(__DPMI16__)) +# define LZO_ARCH_I086PM 1 +# define LZO_ARCH_IA16PM 1 +#endif +#if (LZO_ARCH_ARM_THUMB) && !(LZO_ARCH_ARM) +# error "this should not happen" +#endif +#if (LZO_ARCH_I086PM) && !(LZO_ARCH_I086) +# error "this should not happen" +#endif +#if (LZO_ARCH_I086) +# if (UINT_MAX != LZO_0xffffL) +# error "this should not happen" +# endif +# if (ULONG_MAX != LZO_0xffffffffL) +# error "this should not happen" +# endif +#endif +#if (LZO_ARCH_I386) +# if (UINT_MAX != LZO_0xffffL) && defined(__i386_int16__) +# error "this should not happen" +# endif +# if (UINT_MAX != LZO_0xffffffffL) && !defined(__i386_int16__) +# error "this should not happen" +# endif +# if (ULONG_MAX != LZO_0xffffffffL) +# error "this should not happen" +# endif +#endif +#if !defined(__LZO_MM_OVERRIDE) +#if (LZO_ARCH_I086) +#if (UINT_MAX != LZO_0xffffL) +# error "this should not happen" +#endif +#if defined(__TINY__) || defined(M_I86TM) || defined(_M_I86TM) +# define LZO_MM_TINY 1 +#elif defined(__HUGE__) || defined(_HUGE_) || defined(M_I86HM) || defined(_M_I86HM) +# define LZO_MM_HUGE 1 +#elif defined(__SMALL__) || defined(M_I86SM) || defined(_M_I86SM) || defined(SMALL_MODEL) +# define LZO_MM_SMALL 1 +#elif defined(__MEDIUM__) || defined(M_I86MM) || defined(_M_I86MM) +# define LZO_MM_MEDIUM 1 +#elif defined(__COMPACT__) || defined(M_I86CM) || defined(_M_I86CM) +# define LZO_MM_COMPACT 1 +#elif defined(__LARGE__) || defined(M_I86LM) || defined(_M_I86LM) || defined(LARGE_MODEL) +# define LZO_MM_LARGE 1 +#elif (LZO_CC_AZTECC) +# if defined(_LARGE_CODE) && defined(_LARGE_DATA) +# define LZO_MM_LARGE 1 +# elif defined(_LARGE_CODE) +# define LZO_MM_MEDIUM 1 +# elif defined(_LARGE_DATA) +# define LZO_MM_COMPACT 1 +# else +# define LZO_MM_SMALL 1 +# endif +#elif (LZO_CC_ZORTECHC && defined(__VCM__)) +# define LZO_MM_LARGE 1 +#else +# error "unknown memory model" +#endif +#if (LZO_OS_DOS16 || LZO_OS_OS216 || LZO_OS_WIN16) +#define LZO_HAVE_MM_HUGE_PTR 1 +#define LZO_HAVE_MM_HUGE_ARRAY 1 +#if (LZO_MM_TINY) +# undef LZO_HAVE_MM_HUGE_ARRAY +#endif +#if (LZO_CC_AZTECC || LZO_CC_PACIFICC || LZO_CC_ZORTECHC) +# undef LZO_HAVE_MM_HUGE_PTR +# undef LZO_HAVE_MM_HUGE_ARRAY +#elif (LZO_CC_DMC || LZO_CC_SYMANTECC) +# undef LZO_HAVE_MM_HUGE_ARRAY +#elif (LZO_CC_MSC && defined(_QC)) +# undef LZO_HAVE_MM_HUGE_ARRAY +# if (_MSC_VER < 600) +# undef LZO_HAVE_MM_HUGE_PTR +# endif +#elif (LZO_CC_TURBOC && (__TURBOC__ < 0x0295)) +# undef LZO_HAVE_MM_HUGE_ARRAY +#endif +#if (LZO_ARCH_I086PM) && !(LZO_HAVE_MM_HUGE_PTR) +# if (LZO_OS_DOS16) +# error "this should not happen" +# elif (LZO_CC_ZORTECHC) +# else +# error "this should not happen" +# endif +#endif +#ifdef __cplusplus +extern "C" { +#endif +#if (LZO_CC_BORLANDC && (__BORLANDC__ >= 0x0200)) + extern void __near __cdecl _AHSHIFT(void); +# define LZO_MM_AHSHIFT ((unsigned) _AHSHIFT) +#elif (LZO_CC_DMC || LZO_CC_SYMANTECC || LZO_CC_ZORTECHC) + extern void __near __cdecl _AHSHIFT(void); +# define LZO_MM_AHSHIFT ((unsigned) _AHSHIFT) +#elif (LZO_CC_MSC || LZO_CC_TOPSPEEDC) + extern void __near __cdecl _AHSHIFT(void); +# define LZO_MM_AHSHIFT ((unsigned) _AHSHIFT) +#elif (LZO_CC_TURBOC && (__TURBOC__ >= 0x0295)) + extern void __near __cdecl _AHSHIFT(void); +# define LZO_MM_AHSHIFT ((unsigned) _AHSHIFT) +#elif ((LZO_CC_AZTECC || LZO_CC_PACIFICC || LZO_CC_TURBOC) && LZO_OS_DOS16) +# define LZO_MM_AHSHIFT 12 +#elif (LZO_CC_WATCOMC) + extern unsigned char _HShift; +# define LZO_MM_AHSHIFT ((unsigned) _HShift) +#else +# error "FIXME - implement LZO_MM_AHSHIFT" +#endif +#ifdef __cplusplus +} +#endif +#endif +#elif (LZO_ARCH_C166) +#if !defined(__MODEL__) +# error "FIXME - C166 __MODEL__" +#elif ((__MODEL__) == 0) +# define LZO_MM_SMALL 1 +#elif ((__MODEL__) == 1) +# define LZO_MM_SMALL 1 +#elif ((__MODEL__) == 2) +# define LZO_MM_LARGE 1 +#elif ((__MODEL__) == 3) +# define LZO_MM_TINY 1 +#elif ((__MODEL__) == 4) +# define LZO_MM_XTINY 1 +#elif ((__MODEL__) == 5) +# define LZO_MM_XSMALL 1 +#else +# error "FIXME - C166 __MODEL__" +#endif +#elif (LZO_ARCH_MCS251) +#if !defined(__MODEL__) +# error "FIXME - MCS251 __MODEL__" +#elif ((__MODEL__) == 0) +# define LZO_MM_SMALL 1 +#elif ((__MODEL__) == 2) +# define LZO_MM_LARGE 1 +#elif ((__MODEL__) == 3) +# define LZO_MM_TINY 1 +#elif ((__MODEL__) == 4) +# define LZO_MM_XTINY 1 +#elif ((__MODEL__) == 5) +# define LZO_MM_XSMALL 1 +#else +# error "FIXME - MCS251 __MODEL__" +#endif +#elif (LZO_ARCH_MCS51) +#if !defined(__MODEL__) +# error "FIXME - MCS51 __MODEL__" +#elif ((__MODEL__) == 1) +# define LZO_MM_SMALL 1 +#elif ((__MODEL__) == 2) +# define LZO_MM_LARGE 1 +#elif ((__MODEL__) == 3) +# define LZO_MM_TINY 1 +#elif ((__MODEL__) == 4) +# define LZO_MM_XTINY 1 +#elif ((__MODEL__) == 5) +# define LZO_MM_XSMALL 1 +#else +# error "FIXME - MCS51 __MODEL__" +#endif +#elif (LZO_ARCH_CRAY_PVP) +# define LZO_MM_PVP 1 +#else +# define LZO_MM_FLAT 1 +#endif +#if (LZO_MM_COMPACT) +# define LZO_INFO_MM "compact" +#elif (LZO_MM_FLAT) +# define LZO_INFO_MM "flat" +#elif (LZO_MM_HUGE) +# define LZO_INFO_MM "huge" +#elif (LZO_MM_LARGE) +# define LZO_INFO_MM "large" +#elif (LZO_MM_MEDIUM) +# define LZO_INFO_MM "medium" +#elif (LZO_MM_PVP) +# define LZO_INFO_MM "pvp" +#elif (LZO_MM_SMALL) +# define LZO_INFO_MM "small" +#elif (LZO_MM_TINY) +# define LZO_INFO_MM "tiny" +#else +# error "unknown memory model" +#endif +#endif +#if defined(SIZEOF_SHORT) +# define LZO_SIZEOF_SHORT (SIZEOF_SHORT) +#endif +#if defined(SIZEOF_INT) +# define LZO_SIZEOF_INT (SIZEOF_INT) +#endif +#if defined(SIZEOF_LONG) +# define LZO_SIZEOF_LONG (SIZEOF_LONG) +#endif +#if defined(SIZEOF_LONG_LONG) +# define LZO_SIZEOF_LONG_LONG (SIZEOF_LONG_LONG) +#endif +#if defined(SIZEOF___INT16) +# define LZO_SIZEOF___INT16 (SIZEOF___INT16) +#endif +#if defined(SIZEOF___INT32) +# define LZO_SIZEOF___INT32 (SIZEOF___INT32) +#endif +#if defined(SIZEOF___INT64) +# define LZO_SIZEOF___INT64 (SIZEOF___INT64) +#endif +#if defined(SIZEOF_VOID_P) +# define LZO_SIZEOF_VOID_P (SIZEOF_VOID_P) +#endif +#if defined(SIZEOF_SIZE_T) +# define LZO_SIZEOF_SIZE_T (SIZEOF_SIZE_T) +#endif +#if defined(SIZEOF_PTRDIFF_T) +# define LZO_SIZEOF_PTRDIFF_T (SIZEOF_PTRDIFF_T) +#endif +#define __LZO_LSR(x,b) (((x)+0ul) >> (b)) +#if !defined(LZO_SIZEOF_SHORT) +# if (LZO_ARCH_CRAY_PVP) +# define LZO_SIZEOF_SHORT 8 +# elif (USHRT_MAX == LZO_0xffffL) +# define LZO_SIZEOF_SHORT 2 +# elif (__LZO_LSR(USHRT_MAX,7) == 1) +# define LZO_SIZEOF_SHORT 1 +# elif (__LZO_LSR(USHRT_MAX,15) == 1) +# define LZO_SIZEOF_SHORT 2 +# elif (__LZO_LSR(USHRT_MAX,31) == 1) +# define LZO_SIZEOF_SHORT 4 +# elif (__LZO_LSR(USHRT_MAX,63) == 1) +# define LZO_SIZEOF_SHORT 8 +# elif (__LZO_LSR(USHRT_MAX,127) == 1) +# define LZO_SIZEOF_SHORT 16 +# else +# error "LZO_SIZEOF_SHORT" +# endif +#endif +#if !defined(LZO_SIZEOF_INT) +# if (LZO_ARCH_CRAY_PVP) +# define LZO_SIZEOF_INT 8 +# elif (UINT_MAX == LZO_0xffffL) +# define LZO_SIZEOF_INT 2 +# elif (UINT_MAX == LZO_0xffffffffL) +# define LZO_SIZEOF_INT 4 +# elif (__LZO_LSR(UINT_MAX,7) == 1) +# define LZO_SIZEOF_INT 1 +# elif (__LZO_LSR(UINT_MAX,15) == 1) +# define LZO_SIZEOF_INT 2 +# elif (__LZO_LSR(UINT_MAX,31) == 1) +# define LZO_SIZEOF_INT 4 +# elif (__LZO_LSR(UINT_MAX,63) == 1) +# define LZO_SIZEOF_INT 8 +# elif (__LZO_LSR(UINT_MAX,127) == 1) +# define LZO_SIZEOF_INT 16 +# else +# error "LZO_SIZEOF_INT" +# endif +#endif +#if !defined(LZO_SIZEOF_LONG) +# if (ULONG_MAX == LZO_0xffffffffL) +# define LZO_SIZEOF_LONG 4 +# elif (__LZO_LSR(ULONG_MAX,7) == 1) +# define LZO_SIZEOF_LONG 1 +# elif (__LZO_LSR(ULONG_MAX,15) == 1) +# define LZO_SIZEOF_LONG 2 +# elif (__LZO_LSR(ULONG_MAX,31) == 1) +# define LZO_SIZEOF_LONG 4 +# elif (__LZO_LSR(ULONG_MAX,63) == 1) +# define LZO_SIZEOF_LONG 8 +# elif (__LZO_LSR(ULONG_MAX,127) == 1) +# define LZO_SIZEOF_LONG 16 +# else +# error "LZO_SIZEOF_LONG" +# endif +#endif +#if !defined(LZO_SIZEOF_LONG_LONG) && !defined(LZO_SIZEOF___INT64) +#if (LZO_SIZEOF_LONG > 0 && LZO_SIZEOF_LONG < 8) +# if defined(__LONG_MAX__) && defined(__LONG_LONG_MAX__) +# if (LZO_CC_GNUC >= 0x030300ul) +# if ((__LONG_MAX__)+0 == (__LONG_LONG_MAX__)+0) +# define LZO_SIZEOF_LONG_LONG LZO_SIZEOF_LONG +# elif (__LZO_LSR(__LONG_LONG_MAX__,30) == 1) +# define LZO_SIZEOF_LONG_LONG 4 +# endif +# endif +# endif +#endif +#endif +#if !defined(LZO_SIZEOF_LONG_LONG) && !defined(LZO_SIZEOF___INT64) +#if (LZO_SIZEOF_LONG > 0 && LZO_SIZEOF_LONG < 8) +#if (LZO_ARCH_I086 && LZO_CC_DMC) +#elif (LZO_CC_CILLY) && defined(__GNUC__) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define LZO_SIZEOF_LONG_LONG 8 +#elif ((LZO_OS_WIN32 || LZO_OS_WIN64 || defined(_WIN32)) && LZO_CC_MSC && (_MSC_VER >= 1400)) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_OS_WIN64 || defined(_WIN64)) +# define LZO_SIZEOF___INT64 8 +#elif (LZO_ARCH_I386 && (LZO_CC_DMC)) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_ARCH_I386 && (LZO_CC_SYMANTECC && (__SC__ >= 0x700))) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_ARCH_I386 && (LZO_CC_INTELC && defined(__linux__))) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_ARCH_I386 && (LZO_CC_MWERKS || LZO_CC_PELLESC || LZO_CC_PGI || LZO_CC_SUNPROC)) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_ARCH_I386 && (LZO_CC_INTELC || LZO_CC_MSC)) +# define LZO_SIZEOF___INT64 8 +#elif ((LZO_OS_WIN32 || defined(_WIN32)) && (LZO_CC_MSC)) +# define LZO_SIZEOF___INT64 8 +#elif (LZO_ARCH_I386 && (LZO_CC_BORLANDC && (__BORLANDC__ >= 0x0520))) +# define LZO_SIZEOF___INT64 8 +#elif (LZO_ARCH_I386 && (LZO_CC_WATCOMC && (__WATCOMC__ >= 1100))) +# define LZO_SIZEOF___INT64 8 +#elif (LZO_CC_WATCOMC && defined(_INTEGRAL_MAX_BITS) && (_INTEGRAL_MAX_BITS == 64)) +# define LZO_SIZEOF___INT64 8 +#elif (LZO_OS_OS400 || defined(__OS400__)) && defined(__LLP64_IFC__) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (defined(__vms) || defined(__VMS)) && (__INITIAL_POINTER_SIZE+0 == 64) +# define LZO_SIZEOF_LONG_LONG 8 +#elif (LZO_CC_SDCC) && (LZO_SIZEOF_INT == 2) +#elif 1 && defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) +# define LZO_SIZEOF_LONG_LONG 8 +#endif +#endif +#endif +#if defined(__cplusplus) && (LZO_CC_GNUC) +# if (LZO_CC_GNUC < 0x020800ul) +# undef LZO_SIZEOF_LONG_LONG +# endif +#endif +#if (LZO_CFG_NO_LONG_LONG) || defined(__NO_LONG_LONG) +# undef LZO_SIZEOF_LONG_LONG +#endif +#if !defined(LZO_SIZEOF_VOID_P) +#if (LZO_ARCH_I086) +# define __LZO_WORDSIZE 2 +# if (LZO_MM_TINY || LZO_MM_SMALL || LZO_MM_MEDIUM) +# define LZO_SIZEOF_VOID_P 2 +# elif (LZO_MM_COMPACT || LZO_MM_LARGE || LZO_MM_HUGE) +# define LZO_SIZEOF_VOID_P 4 +# else +# error "LZO_MM" +# endif +#elif (LZO_ARCH_AVR || LZO_ARCH_Z80) +# define __LZO_WORDSIZE 1 +# define LZO_SIZEOF_VOID_P 2 +#elif (LZO_ARCH_C166 || LZO_ARCH_MCS51 || LZO_ARCH_MCS251 || LZO_ARCH_MSP430) +# define LZO_SIZEOF_VOID_P 2 +#elif (LZO_ARCH_H8300) +# if defined(__NORMAL_MODE__) +# define __LZO_WORDSIZE 4 +# define LZO_SIZEOF_VOID_P 2 +# elif defined(__H8300H__) || defined(__H8300S__) || defined(__H8300SX__) +# define __LZO_WORDSIZE 4 +# define LZO_SIZEOF_VOID_P 4 +# else +# define __LZO_WORDSIZE 2 +# define LZO_SIZEOF_VOID_P 2 +# endif +# if (LZO_CC_GNUC && (LZO_CC_GNUC < 0x040000ul)) && (LZO_SIZEOF_INT == 4) +# define LZO_SIZEOF_SIZE_T LZO_SIZEOF_INT +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_INT +# endif +#elif (LZO_ARCH_M16C) +# define __LZO_WORDSIZE 2 +# if defined(__m32c_cpu__) || defined(__m32cm_cpu__) +# define LZO_SIZEOF_VOID_P 4 +# else +# define LZO_SIZEOF_VOID_P 2 +# endif +#elif (LZO_SIZEOF_LONG == 8) && ((defined(__mips__) && defined(__R5900__)) || defined(__MIPS_PSX2__)) +# define __LZO_WORDSIZE 8 +# define LZO_SIZEOF_VOID_P 4 +#elif defined(__LLP64__) || defined(__LLP64) || defined(_LLP64) || defined(_WIN64) +# define __LZO_WORDSIZE 8 +# define LZO_SIZEOF_VOID_P 8 +#elif (LZO_OS_OS400 || defined(__OS400__)) && defined(__LLP64_IFC__) +# define LZO_SIZEOF_VOID_P LZO_SIZEOF_LONG +# define LZO_SIZEOF_SIZE_T LZO_SIZEOF_LONG +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_LONG +#elif (LZO_OS_OS400 || defined(__OS400__)) +# define __LZO_WORDSIZE LZO_SIZEOF_LONG +# define LZO_SIZEOF_VOID_P 16 +# define LZO_SIZEOF_SIZE_T LZO_SIZEOF_LONG +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_LONG +#elif (defined(__vms) || defined(__VMS)) && (__INITIAL_POINTER_SIZE+0 == 64) +# define LZO_SIZEOF_VOID_P 8 +# define LZO_SIZEOF_SIZE_T LZO_SIZEOF_LONG +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_LONG +#elif (LZO_ARCH_SPU) +# if 0 +# define __LZO_WORDSIZE 16 +# endif +# define LZO_SIZEOF_VOID_P 4 +#else +# define LZO_SIZEOF_VOID_P LZO_SIZEOF_LONG +#endif +#endif +#if !defined(LZO_WORDSIZE) +# if defined(__LZO_WORDSIZE) +# define LZO_WORDSIZE __LZO_WORDSIZE +# else +# define LZO_WORDSIZE LZO_SIZEOF_VOID_P +# endif +#endif +#if !defined(LZO_SIZEOF_SIZE_T) +#if (LZO_ARCH_I086 || LZO_ARCH_M16C) +# define LZO_SIZEOF_SIZE_T 2 +#else +# define LZO_SIZEOF_SIZE_T LZO_SIZEOF_VOID_P +#endif +#endif +#if !defined(LZO_SIZEOF_PTRDIFF_T) +#if (LZO_ARCH_I086) +# if (LZO_MM_TINY || LZO_MM_SMALL || LZO_MM_MEDIUM || LZO_MM_HUGE) +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_VOID_P +# elif (LZO_MM_COMPACT || LZO_MM_LARGE) +# if (LZO_CC_BORLANDC || LZO_CC_TURBOC) +# define LZO_SIZEOF_PTRDIFF_T 4 +# else +# define LZO_SIZEOF_PTRDIFF_T 2 +# endif +# else +# error "LZO_MM" +# endif +#else +# define LZO_SIZEOF_PTRDIFF_T LZO_SIZEOF_SIZE_T +#endif +#endif +#if (LZO_ABI_NEUTRAL_ENDIAN) +# undef LZO_ABI_BIG_ENDIAN +# undef LZO_ABI_LITTLE_ENDIAN +#elif !(LZO_ABI_BIG_ENDIAN) && !(LZO_ABI_LITTLE_ENDIAN) +#if (LZO_ARCH_ALPHA) && (LZO_ARCH_CRAY_MPP) +# define LZO_ABI_BIG_ENDIAN 1 +#elif (LZO_ARCH_IA64) && (LZO_OS_POSIX_LINUX || LZO_OS_WIN64) +# define LZO_ABI_LITTLE_ENDIAN 1 +#elif (LZO_ARCH_ALPHA || LZO_ARCH_AMD64 || LZO_ARCH_BLACKFIN || LZO_ARCH_CRIS || LZO_ARCH_I086 || LZO_ARCH_I386 || LZO_ARCH_MSP430) +# define LZO_ABI_LITTLE_ENDIAN 1 +#elif (LZO_ARCH_AVR32 || LZO_ARCH_M68K || LZO_ARCH_S390) +# define LZO_ABI_BIG_ENDIAN 1 +#elif 1 && defined(__IAR_SYSTEMS_ICC__) && defined(__LITTLE_ENDIAN__) +# if (__LITTLE_ENDIAN__ == 1) +# define LZO_ABI_LITTLE_ENDIAN 1 +# else +# define LZO_ABI_BIG_ENDIAN 1 +# endif +#elif 1 && defined(__BIG_ENDIAN__) && !defined(__LITTLE_ENDIAN__) +# define LZO_ABI_BIG_ENDIAN 1 +#elif 1 && defined(__LITTLE_ENDIAN__) && !defined(__BIG_ENDIAN__) +# define LZO_ABI_LITTLE_ENDIAN 1 +#elif 1 && (LZO_ARCH_ARM) && defined(__ARMEB__) && !defined(__ARMEL__) +# define LZO_ABI_BIG_ENDIAN 1 +#elif 1 && (LZO_ARCH_ARM) && defined(__ARMEL__) && !defined(__ARMEB__) +# define LZO_ABI_LITTLE_ENDIAN 1 +#elif 1 && (LZO_ARCH_MIPS) && defined(__MIPSEB__) && !defined(__MIPSEL__) +# define LZO_ABI_BIG_ENDIAN 1 +#elif 1 && (LZO_ARCH_MIPS) && defined(__MIPSEL__) && !defined(__MIPSEB__) +# define LZO_ABI_LITTLE_ENDIAN 1 +#endif +#endif +#if (LZO_ABI_BIG_ENDIAN) && (LZO_ABI_LITTLE_ENDIAN) +# error "this should not happen" +#endif +#if (LZO_ABI_BIG_ENDIAN) +# define LZO_INFO_ABI_ENDIAN "be" +#elif (LZO_ABI_LITTLE_ENDIAN) +# define LZO_INFO_ABI_ENDIAN "le" +#elif (LZO_ABI_NEUTRAL_ENDIAN) +# define LZO_INFO_ABI_ENDIAN "neutral" +#endif +#if (LZO_SIZEOF_INT == 1 && LZO_SIZEOF_LONG == 2 && LZO_SIZEOF_VOID_P == 2) +# define LZO_ABI_I8LP16 1 +# define LZO_INFO_ABI_PM "i8lp16" +#elif (LZO_SIZEOF_INT == 2 && LZO_SIZEOF_LONG == 2 && LZO_SIZEOF_VOID_P == 2) +# define LZO_ABI_ILP16 1 +# define LZO_INFO_ABI_PM "ilp16" +#elif (LZO_SIZEOF_INT == 4 && LZO_SIZEOF_LONG == 4 && LZO_SIZEOF_VOID_P == 4) +# define LZO_ABI_ILP32 1 +# define LZO_INFO_ABI_PM "ilp32" +#elif (LZO_SIZEOF_INT == 4 && LZO_SIZEOF_LONG == 4 && LZO_SIZEOF_VOID_P == 8 && LZO_SIZEOF_SIZE_T == 8) +# define LZO_ABI_LLP64 1 +# define LZO_INFO_ABI_PM "llp64" +#elif (LZO_SIZEOF_INT == 4 && LZO_SIZEOF_LONG == 8 && LZO_SIZEOF_VOID_P == 8) +# define LZO_ABI_LP64 1 +# define LZO_INFO_ABI_PM "lp64" +#elif (LZO_SIZEOF_INT == 8 && LZO_SIZEOF_LONG == 8 && LZO_SIZEOF_VOID_P == 8) +# define LZO_ABI_ILP64 1 +# define LZO_INFO_ABI_PM "ilp64" +#elif (LZO_SIZEOF_INT == 4 && LZO_SIZEOF_LONG == 8 && LZO_SIZEOF_VOID_P == 4) +# define LZO_ABI_IP32L64 1 +# define LZO_INFO_ABI_PM "ip32l64" +#endif +#if !defined(__LZO_LIBC_OVERRIDE) +#if (LZO_LIBC_NAKED) +# define LZO_INFO_LIBC "naked" +#elif (LZO_LIBC_FREESTANDING) +# define LZO_INFO_LIBC "freestanding" +#elif (LZO_LIBC_MOSTLY_FREESTANDING) +# define LZO_INFO_LIBC "mfreestanding" +#elif (LZO_LIBC_ISOC90) +# define LZO_INFO_LIBC "isoc90" +#elif (LZO_LIBC_ISOC99) +# define LZO_INFO_LIBC "isoc99" +#elif defined(__dietlibc__) +# define LZO_LIBC_DIETLIBC 1 +# define LZO_INFO_LIBC "dietlibc" +#elif defined(_NEWLIB_VERSION) +# define LZO_LIBC_NEWLIB 1 +# define LZO_INFO_LIBC "newlib" +#elif defined(__UCLIBC__) && defined(__UCLIBC_MAJOR__) && defined(__UCLIBC_MINOR__) +# if defined(__UCLIBC_SUBLEVEL__) +# define LZO_LIBC_UCLIBC (__UCLIBC_MAJOR__ * 0x10000L + __UCLIBC_MINOR__ * 0x100 + __UCLIBC_SUBLEVEL__) +# else +# define LZO_LIBC_UCLIBC 0x00090bL +# endif +# define LZO_INFO_LIBC "uclibc" +#elif defined(__GLIBC__) && defined(__GLIBC_MINOR__) +# define LZO_LIBC_GLIBC (__GLIBC__ * 0x10000L + __GLIBC_MINOR__ * 0x100) +# define LZO_INFO_LIBC "glibc" +#elif (LZO_CC_MWERKS) && defined(__MSL__) +# define LZO_LIBC_MSL __MSL__ +# define LZO_INFO_LIBC "msl" +#elif 1 && defined(__IAR_SYSTEMS_ICC__) +# define LZO_LIBC_ISOC90 1 +# define LZO_INFO_LIBC "isoc90" +#else +# define LZO_LIBC_DEFAULT 1 +# define LZO_INFO_LIBC "default" +#endif +#endif +#if !defined(__lzo_gnuc_extension__) +#if (LZO_CC_GNUC >= 0x020800ul) +# define __lzo_gnuc_extension__ __extension__ +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_gnuc_extension__ __extension__ +#else +# define __lzo_gnuc_extension__ /*empty*/ +#endif +#endif +#if !defined(__lzo_ua_volatile) +# define __lzo_ua_volatile volatile +#endif +#if !defined(__lzo_alignof) +#if (LZO_CC_CILLY || LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_LLVM || LZO_CC_PATHSCALE || LZO_CC_PGI) +# define __lzo_alignof(e) __alignof__(e) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 700)) +# define __lzo_alignof(e) __alignof__(e) +#elif (LZO_CC_MSC && (_MSC_VER >= 1300)) +# define __lzo_alignof(e) __alignof(e) +#elif (LZO_CC_SUNPROC && (LZO_CC_SUNPROC >= 0x5100)) +# define __lzo_alignof(e) __alignof__(e) +#endif +#endif +#if defined(__lzo_alignof) +# define __lzo_HAVE_alignof 1 +#endif +#if !defined(__lzo_constructor) +#if (LZO_CC_GNUC >= 0x030400ul) +# define __lzo_constructor __attribute__((__constructor__,__used__)) +#elif (LZO_CC_GNUC >= 0x020700ul) +# define __lzo_constructor __attribute__((__constructor__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_constructor __attribute__((__constructor__)) +#endif +#endif +#if defined(__lzo_constructor) +# define __lzo_HAVE_constructor 1 +#endif +#if !defined(__lzo_destructor) +#if (LZO_CC_GNUC >= 0x030400ul) +# define __lzo_destructor __attribute__((__destructor__,__used__)) +#elif (LZO_CC_GNUC >= 0x020700ul) +# define __lzo_destructor __attribute__((__destructor__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_destructor __attribute__((__destructor__)) +#endif +#endif +#if defined(__lzo_destructor) +# define __lzo_HAVE_destructor 1 +#endif +#if (__lzo_HAVE_destructor) && !(__lzo_HAVE_constructor) +# error "this should not happen" +#endif +#if !defined(__lzo_inline) +#if (LZO_CC_TURBOC && (__TURBOC__ <= 0x0295)) +#elif defined(__cplusplus) +# define __lzo_inline inline +#elif (LZO_CC_BORLANDC && (__BORLANDC__ >= 0x0550)) +# define __lzo_inline __inline +#elif (LZO_CC_CILLY || LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_LLVM || LZO_CC_PATHSCALE || LZO_CC_PGI) +# define __lzo_inline __inline__ +#elif (LZO_CC_DMC) +# define __lzo_inline __inline +#elif (LZO_CC_INTELC) +# define __lzo_inline __inline +#elif (LZO_CC_MWERKS && (__MWERKS__ >= 0x2405)) +# define __lzo_inline __inline +#elif (LZO_CC_MSC && (_MSC_VER >= 900)) +# define __lzo_inline __inline +#elif (LZO_CC_SUNPROC && (LZO_CC_SUNPROC >= 0x5100)) +# define __lzo_inline __inline__ +#elif defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) +# define __lzo_inline inline +#endif +#endif +#if defined(__lzo_inline) +# define __lzo_HAVE_inline 1 +#else +# define __lzo_inline /*empty*/ +#endif +#if !defined(__lzo_forceinline) +#if (LZO_CC_GNUC >= 0x030200ul) +# define __lzo_forceinline __inline__ __attribute__((__always_inline__)) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 450) && LZO_CC_SYNTAX_MSC) +# define __lzo_forceinline __forceinline +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 800) && LZO_CC_SYNTAX_GNUC) +# define __lzo_forceinline __inline__ __attribute__((__always_inline__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_forceinline __inline__ __attribute__((__always_inline__)) +#elif (LZO_CC_MSC && (_MSC_VER >= 1200)) +# define __lzo_forceinline __forceinline +#elif (LZO_CC_SUNPROC && (LZO_CC_SUNPROC >= 0x5100)) +# define __lzo_forceinline __inline__ __attribute__((__always_inline__)) +#endif +#endif +#if defined(__lzo_forceinline) +# define __lzo_HAVE_forceinline 1 +#else +# define __lzo_forceinline /*empty*/ +#endif +#if !defined(__lzo_noinline) +#if 1 && (LZO_ARCH_I386) && (LZO_CC_GNUC >= 0x040000ul) && (LZO_CC_GNUC < 0x040003ul) +# define __lzo_noinline __attribute__((__noinline__,__used__)) +#elif (LZO_CC_GNUC >= 0x030200ul) +# define __lzo_noinline __attribute__((__noinline__)) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 600) && LZO_CC_SYNTAX_MSC) +# define __lzo_noinline __declspec(noinline) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 800) && LZO_CC_SYNTAX_GNUC) +# define __lzo_noinline __attribute__((__noinline__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_noinline __attribute__((__noinline__)) +#elif (LZO_CC_MSC && (_MSC_VER >= 1300)) +# define __lzo_noinline __declspec(noinline) +#elif (LZO_CC_MWERKS && (__MWERKS__ >= 0x3200) && (LZO_OS_WIN32 || LZO_OS_WIN64)) +# if defined(__cplusplus) +# else +# define __lzo_noinline __declspec(noinline) +# endif +#elif (LZO_CC_SUNPROC && (LZO_CC_SUNPROC >= 0x5100)) +# define __lzo_noinline __attribute__((__noinline__)) +#endif +#endif +#if defined(__lzo_noinline) +# define __lzo_HAVE_noinline 1 +#else +# define __lzo_noinline /*empty*/ +#endif +#if (__lzo_HAVE_forceinline || __lzo_HAVE_noinline) && !(__lzo_HAVE_inline) +# error "this should not happen" +#endif +#if !defined(__lzo_noreturn) +#if (LZO_CC_GNUC >= 0x020700ul) +# define __lzo_noreturn __attribute__((__noreturn__)) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 450) && LZO_CC_SYNTAX_MSC) +# define __lzo_noreturn __declspec(noreturn) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 600) && LZO_CC_SYNTAX_GNUC) +# define __lzo_noreturn __attribute__((__noreturn__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_noreturn __attribute__((__noreturn__)) +#elif (LZO_CC_MSC && (_MSC_VER >= 1200)) +# define __lzo_noreturn __declspec(noreturn) +#endif +#endif +#if defined(__lzo_noreturn) +# define __lzo_HAVE_noreturn 1 +#else +# define __lzo_noreturn /*empty*/ +#endif +#if !defined(__lzo_nothrow) +#if (LZO_CC_GNUC >= 0x030300ul) +# define __lzo_nothrow __attribute__((__nothrow__)) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 450) && LZO_CC_SYNTAX_MSC) && defined(__cplusplus) +# define __lzo_nothrow __declspec(nothrow) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 900) && LZO_CC_SYNTAX_GNUC) +# define __lzo_nothrow __attribute__((__nothrow__)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_nothrow __attribute__((__nothrow__)) +#elif (LZO_CC_MSC && (_MSC_VER >= 1200)) && defined(__cplusplus) +# define __lzo_nothrow __declspec(nothrow) +#endif +#endif +#if defined(__lzo_nothrow) +# define __lzo_HAVE_nothrow 1 +#else +# define __lzo_nothrow /*empty*/ +#endif +#if !defined(__lzo_restrict) +#if (LZO_CC_GNUC >= 0x030400ul) +# define __lzo_restrict __restrict__ +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 600) && LZO_CC_SYNTAX_GNUC) +# define __lzo_restrict __restrict__ +#elif (LZO_CC_CLANG || LZO_CC_LLVM) +# define __lzo_restrict __restrict__ +#elif (LZO_CC_MSC && (_MSC_VER >= 1400)) +# define __lzo_restrict __restrict +#endif +#endif +#if defined(__lzo_restrict) +# define __lzo_HAVE_restrict 1 +#else +# define __lzo_restrict /*empty*/ +#endif +#if !defined(__lzo_likely) && !defined(__lzo_unlikely) +#if (LZO_CC_GNUC >= 0x030200ul) +# define __lzo_likely(e) (__builtin_expect(!!(e),1)) +# define __lzo_unlikely(e) (__builtin_expect(!!(e),0)) +#elif (LZO_CC_INTELC && (__INTEL_COMPILER >= 800)) +# define __lzo_likely(e) (__builtin_expect(!!(e),1)) +# define __lzo_unlikely(e) (__builtin_expect(!!(e),0)) +#elif (LZO_CC_CLANG || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define __lzo_likely(e) (__builtin_expect(!!(e),1)) +# define __lzo_unlikely(e) (__builtin_expect(!!(e),0)) +#endif +#endif +#if defined(__lzo_likely) +# define __lzo_HAVE_likely 1 +#else +# define __lzo_likely(e) (e) +#endif +#if defined(__lzo_unlikely) +# define __lzo_HAVE_unlikely 1 +#else +# define __lzo_unlikely(e) (e) +#endif +#if !defined(LZO_UNUSED) +# if (LZO_CC_BORLANDC && (__BORLANDC__ >= 0x0600)) +# define LZO_UNUSED(var) ((void) &var) +# elif (LZO_CC_BORLANDC || LZO_CC_HIGHC || LZO_CC_NDPC || LZO_CC_PELLESC || LZO_CC_TURBOC) +# define LZO_UNUSED(var) if (&var) ; else +# elif (LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define LZO_UNUSED(var) ((void) var) +# elif (LZO_CC_MSC && (_MSC_VER < 900)) +# define LZO_UNUSED(var) if (&var) ; else +# elif (LZO_CC_KEILC) +# define LZO_UNUSED(var) {extern int __lzo_unused[1-2*!(sizeof(var)>0)];} +# elif (LZO_CC_PACIFICC) +# define LZO_UNUSED(var) ((void) sizeof(var)) +# elif (LZO_CC_WATCOMC) && defined(__cplusplus) +# define LZO_UNUSED(var) ((void) var) +# else +# define LZO_UNUSED(var) ((void) &var) +# endif +#endif +#if !defined(LZO_UNUSED_FUNC) +# if (LZO_CC_BORLANDC && (__BORLANDC__ >= 0x0600)) +# define LZO_UNUSED_FUNC(func) ((void) func) +# elif (LZO_CC_BORLANDC || LZO_CC_NDPC || LZO_CC_TURBOC) +# define LZO_UNUSED_FUNC(func) if (func) ; else +# elif (LZO_CC_CLANG || LZO_CC_LLVM) +# define LZO_UNUSED_FUNC(func) ((void) &func) +# elif (LZO_CC_MSC && (_MSC_VER < 900)) +# define LZO_UNUSED_FUNC(func) if (func) ; else +# elif (LZO_CC_MSC) +# define LZO_UNUSED_FUNC(func) ((void) &func) +# elif (LZO_CC_KEILC || LZO_CC_PELLESC) +# define LZO_UNUSED_FUNC(func) {extern int __lzo_unused[1-2*!(sizeof((int)func)>0)];} +# else +# define LZO_UNUSED_FUNC(func) ((void) func) +# endif +#endif +#if !defined(LZO_UNUSED_LABEL) +# if (LZO_CC_WATCOMC) && defined(__cplusplus) +# define LZO_UNUSED_LABEL(l) switch(0) case 1:goto l +# elif (LZO_CC_CLANG || LZO_CC_INTELC || LZO_CC_WATCOMC) +# define LZO_UNUSED_LABEL(l) if (0) goto l +# else +# define LZO_UNUSED_LABEL(l) switch(0) case 1:goto l +# endif +#endif +#if !defined(LZO_DEFINE_UNINITIALIZED_VAR) +# if 0 +# define LZO_DEFINE_UNINITIALIZED_VAR(type,var,init) type var +# elif 0 && (LZO_CC_GNUC) +# define LZO_DEFINE_UNINITIALIZED_VAR(type,var,init) type var = var +# else +# define LZO_DEFINE_UNINITIALIZED_VAR(type,var,init) type var = init +# endif +#endif +#if !defined(LZO_UNCONST_CAST) +# if 0 && defined(__cplusplus) +# define LZO_UNCONST_CAST(t,e) (const_cast (e)) +# elif (LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_LLVM || LZO_CC_PATHSCALE) +# define LZO_UNCONST_CAST(t,e) ((t) ((void *) ((char *) ((lzo_uintptr_t) ((const void *) (e)))))) +# else +# define LZO_UNCONST_CAST(t,e) ((t) ((void *) ((char *) ((const void *) (e))))) +# endif +#endif +#if !defined(LZO_COMPILE_TIME_ASSERT_HEADER) +# if (LZO_CC_AZTECC || LZO_CC_ZORTECHC) +# define LZO_COMPILE_TIME_ASSERT_HEADER(e) extern int __lzo_cta[1-!(e)]; +# elif (LZO_CC_DMC || LZO_CC_SYMANTECC) +# define LZO_COMPILE_TIME_ASSERT_HEADER(e) extern int __lzo_cta[1u-2*!(e)]; +# elif (LZO_CC_TURBOC && (__TURBOC__ == 0x0295)) +# define LZO_COMPILE_TIME_ASSERT_HEADER(e) extern int __lzo_cta[1-!(e)]; +# else +# define LZO_COMPILE_TIME_ASSERT_HEADER(e) extern int __lzo_cta[1-2*!(e)]; +# endif +#endif +#if !defined(LZO_COMPILE_TIME_ASSERT) +# if (LZO_CC_AZTECC) +# define LZO_COMPILE_TIME_ASSERT(e) {typedef int __lzo_cta_t[1-!(e)];} +# elif (LZO_CC_DMC || LZO_CC_PACIFICC || LZO_CC_SYMANTECC || LZO_CC_ZORTECHC) +# define LZO_COMPILE_TIME_ASSERT(e) switch(0) case 1:case !(e):break; +# elif (LZO_CC_MSC && (_MSC_VER < 900)) +# define LZO_COMPILE_TIME_ASSERT(e) switch(0) case 1:case !(e):break; +# elif (LZO_CC_TURBOC && (__TURBOC__ == 0x0295)) +# define LZO_COMPILE_TIME_ASSERT(e) switch(0) case 1:case !(e):break; +# else +# define LZO_COMPILE_TIME_ASSERT(e) {typedef int __lzo_cta_t[1-2*!(e)];} +# endif +#endif +#if (LZO_ARCH_I086 || LZO_ARCH_I386) && (LZO_OS_DOS16 || LZO_OS_DOS32 || LZO_OS_OS2 || LZO_OS_OS216 || LZO_OS_WIN16 || LZO_OS_WIN32 || LZO_OS_WIN64) +# if (LZO_CC_GNUC || LZO_CC_HIGHC || LZO_CC_NDPC || LZO_CC_PACIFICC) +# elif (LZO_CC_DMC || LZO_CC_SYMANTECC || LZO_CC_ZORTECHC) +# define __lzo_cdecl __cdecl +# define __lzo_cdecl_atexit /*empty*/ +# define __lzo_cdecl_main __cdecl +# if (LZO_OS_OS2 && (LZO_CC_DMC || LZO_CC_SYMANTECC)) +# define __lzo_cdecl_qsort __pascal +# elif (LZO_OS_OS2 && (LZO_CC_ZORTECHC)) +# define __lzo_cdecl_qsort _stdcall +# else +# define __lzo_cdecl_qsort __cdecl +# endif +# elif (LZO_CC_WATCOMC) +# define __lzo_cdecl __cdecl +# else +# define __lzo_cdecl __cdecl +# define __lzo_cdecl_atexit __cdecl +# define __lzo_cdecl_main __cdecl +# define __lzo_cdecl_qsort __cdecl +# endif +# if (LZO_CC_GNUC || LZO_CC_HIGHC || LZO_CC_NDPC || LZO_CC_PACIFICC || LZO_CC_WATCOMC) +# elif (LZO_OS_OS2 && (LZO_CC_DMC || LZO_CC_SYMANTECC)) +# define __lzo_cdecl_sighandler __pascal +# elif (LZO_OS_OS2 && (LZO_CC_ZORTECHC)) +# define __lzo_cdecl_sighandler _stdcall +# elif (LZO_CC_MSC && (_MSC_VER >= 1400)) && defined(_M_CEE_PURE) +# define __lzo_cdecl_sighandler __clrcall +# elif (LZO_CC_MSC && (_MSC_VER >= 600 && _MSC_VER < 700)) +# if defined(_DLL) +# define __lzo_cdecl_sighandler _far _cdecl _loadds +# elif defined(_MT) +# define __lzo_cdecl_sighandler _far _cdecl +# else +# define __lzo_cdecl_sighandler _cdecl +# endif +# else +# define __lzo_cdecl_sighandler __cdecl +# endif +#elif (LZO_ARCH_I386) && (LZO_CC_WATCOMC) +# define __lzo_cdecl __cdecl +#elif (LZO_ARCH_M68K && LZO_OS_TOS && (LZO_CC_PUREC || LZO_CC_TURBOC)) +# define __lzo_cdecl cdecl +#endif +#if !defined(__lzo_cdecl) +# define __lzo_cdecl /*empty*/ +#endif +#if !defined(__lzo_cdecl_atexit) +# define __lzo_cdecl_atexit /*empty*/ +#endif +#if !defined(__lzo_cdecl_main) +# define __lzo_cdecl_main /*empty*/ +#endif +#if !defined(__lzo_cdecl_qsort) +# define __lzo_cdecl_qsort /*empty*/ +#endif +#if !defined(__lzo_cdecl_sighandler) +# define __lzo_cdecl_sighandler /*empty*/ +#endif +#if !defined(__lzo_cdecl_va) +# define __lzo_cdecl_va __lzo_cdecl +#endif +#if !(LZO_CFG_NO_WINDOWS_H) +#if (LZO_OS_CYGWIN || (LZO_OS_EMX && defined(__RSXNT__)) || LZO_OS_WIN32 || LZO_OS_WIN64) +# if (LZO_CC_WATCOMC && (__WATCOMC__ < 1000)) +# elif (LZO_OS_WIN32 && LZO_CC_GNUC) && defined(__PW32__) +# elif ((LZO_OS_CYGWIN || defined(__MINGW32__)) && (LZO_CC_GNUC && (LZO_CC_GNUC < 0x025f00ul))) +# else +# define LZO_HAVE_WINDOWS_H 1 +# endif +#endif +#endif +#if (LZO_ARCH_ALPHA) +# define LZO_OPT_AVOID_UINT_INDEX 1 +# define LZO_OPT_AVOID_SHORT 1 +# define LZO_OPT_AVOID_USHORT 1 +#elif (LZO_ARCH_AMD64) +# define LZO_OPT_AVOID_INT_INDEX 1 +# define LZO_OPT_AVOID_UINT_INDEX 1 +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +# define LZO_OPT_UNALIGNED64 1 +#elif (LZO_ARCH_ARM && LZO_ARCH_ARM_THUMB) +#elif (LZO_ARCH_ARM) +# define LZO_OPT_AVOID_SHORT 1 +# define LZO_OPT_AVOID_USHORT 1 +#elif (LZO_ARCH_CRIS) +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +#elif (LZO_ARCH_I386) +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +#elif (LZO_ARCH_IA64) +# define LZO_OPT_AVOID_INT_INDEX 1 +# define LZO_OPT_AVOID_UINT_INDEX 1 +# define LZO_OPT_PREFER_POSTINC 1 +#elif (LZO_ARCH_M68K) +# define LZO_OPT_PREFER_POSTINC 1 +# define LZO_OPT_PREFER_PREDEC 1 +# if defined(__mc68020__) && !defined(__mcoldfire__) +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +# endif +#elif (LZO_ARCH_MIPS) +# define LZO_OPT_AVOID_UINT_INDEX 1 +#elif (LZO_ARCH_POWERPC) +# define LZO_OPT_PREFER_PREINC 1 +# define LZO_OPT_PREFER_PREDEC 1 +# if (LZO_ABI_BIG_ENDIAN) +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +# endif +#elif (LZO_ARCH_S390) +# define LZO_OPT_UNALIGNED16 1 +# define LZO_OPT_UNALIGNED32 1 +# if (LZO_SIZEOF_SIZE_T == 8) +# define LZO_OPT_UNALIGNED64 1 +# endif +#elif (LZO_ARCH_SH) +# define LZO_OPT_PREFER_POSTINC 1 +# define LZO_OPT_PREFER_PREDEC 1 +#endif +#ifndef LZO_CFG_NO_INLINE_ASM +#if (LZO_CC_LLVM) +# define LZO_CFG_NO_INLINE_ASM 1 +#endif +#endif +#ifndef LZO_CFG_NO_UNALIGNED +#if (LZO_ABI_NEUTRAL_ENDIAN) || (LZO_ARCH_GENERIC) +# define LZO_CFG_NO_UNALIGNED 1 +#endif +#endif +#if (LZO_CFG_NO_UNALIGNED) +# undef LZO_OPT_UNALIGNED16 +# undef LZO_OPT_UNALIGNED32 +# undef LZO_OPT_UNALIGNED64 +#endif +#if (LZO_CFG_NO_INLINE_ASM) +#elif (LZO_ARCH_I386 && (LZO_OS_DOS32 || LZO_OS_WIN32) && (LZO_CC_DMC || LZO_CC_INTELC || LZO_CC_MSC || LZO_CC_PELLESC)) +# define LZO_ASM_SYNTAX_MSC 1 +#elif (LZO_OS_WIN64 && (LZO_CC_DMC || LZO_CC_INTELC || LZO_CC_MSC || LZO_CC_PELLESC)) +#elif (LZO_ARCH_I386 && LZO_CC_GNUC && (LZO_CC_GNUC == 0x011f00ul)) +#elif (LZO_ARCH_I386 && (LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_INTELC || LZO_CC_PATHSCALE)) +# define LZO_ASM_SYNTAX_GNUC 1 +#elif (LZO_ARCH_AMD64 && (LZO_CC_CLANG || LZO_CC_GNUC || LZO_CC_INTELC || LZO_CC_PATHSCALE)) +# define LZO_ASM_SYNTAX_GNUC 1 +#endif +#if (LZO_ASM_SYNTAX_GNUC) +#if (LZO_ARCH_I386 && LZO_CC_GNUC && (LZO_CC_GNUC < 0x020000ul)) +# define __LZO_ASM_CLOBBER "ax" +#elif (LZO_CC_INTELC) +# define __LZO_ASM_CLOBBER "memory" +#else +# define __LZO_ASM_CLOBBER "cc", "memory" +#endif +#endif +#if defined(__LZO_INFOSTR_MM) +#elif (LZO_MM_FLAT) && (defined(__LZO_INFOSTR_PM) || defined(LZO_INFO_ABI_PM)) +# define __LZO_INFOSTR_MM "" +#elif defined(LZO_INFO_MM) +# define __LZO_INFOSTR_MM "." LZO_INFO_MM +#else +# define __LZO_INFOSTR_MM "" +#endif +#if defined(__LZO_INFOSTR_PM) +#elif defined(LZO_INFO_ABI_PM) +# define __LZO_INFOSTR_PM "." LZO_INFO_ABI_PM +#else +# define __LZO_INFOSTR_PM "" +#endif +#if defined(__LZO_INFOSTR_ENDIAN) +#elif defined(LZO_INFO_ABI_ENDIAN) +# define __LZO_INFOSTR_ENDIAN "." LZO_INFO_ABI_ENDIAN +#else +# define __LZO_INFOSTR_ENDIAN "" +#endif +#if defined(__LZO_INFOSTR_OSNAME) +#elif defined(LZO_INFO_OS_CONSOLE) +# define __LZO_INFOSTR_OSNAME LZO_INFO_OS "." LZO_INFO_OS_CONSOLE +#elif defined(LZO_INFO_OS_POSIX) +# define __LZO_INFOSTR_OSNAME LZO_INFO_OS "." LZO_INFO_OS_POSIX +#else +# define __LZO_INFOSTR_OSNAME LZO_INFO_OS +#endif +#if defined(__LZO_INFOSTR_LIBC) +#elif defined(LZO_INFO_LIBC) +# define __LZO_INFOSTR_LIBC "." LZO_INFO_LIBC +#else +# define __LZO_INFOSTR_LIBC "" +#endif +#if defined(__LZO_INFOSTR_CCVER) +#elif defined(LZO_INFO_CCVER) +# define __LZO_INFOSTR_CCVER " " LZO_INFO_CCVER +#else +# define __LZO_INFOSTR_CCVER "" +#endif +#define LZO_INFO_STRING \ + LZO_INFO_ARCH __LZO_INFOSTR_MM __LZO_INFOSTR_PM __LZO_INFOSTR_ENDIAN \ + " " __LZO_INFOSTR_OSNAME __LZO_INFOSTR_LIBC " " LZO_INFO_CC __LZO_INFOSTR_CCVER + +#endif + +#endif + +#undef LZO_HAVE_CONFIG_H +#include "minilzo.h" + +#if !defined(MINILZO_VERSION) || (MINILZO_VERSION != 0x2040) +# error "version mismatch in miniLZO source files" +#endif + +#ifdef MINILZO_HAVE_CONFIG_H +# define LZO_HAVE_CONFIG_H 1 +#endif + +#ifndef __LZO_CONF_H +#define __LZO_CONF_H 1 + +#if !defined(__LZO_IN_MINILZO) +#if (LZO_CFG_FREESTANDING) +# define LZO_LIBC_FREESTANDING 1 +# define LZO_OS_FREESTANDING 1 +# define ACC_LIBC_FREESTANDING 1 +# define ACC_OS_FREESTANDING 1 +#endif +#if (LZO_CFG_NO_UNALIGNED) +# define ACC_CFG_NO_UNALIGNED 1 +#endif +#if (LZO_ARCH_GENERIC) +# define ACC_ARCH_GENERIC 1 +#endif +#if (LZO_ABI_NEUTRAL_ENDIAN) +# define ACC_ABI_NEUTRAL_ENDIAN 1 +#endif +#if (LZO_HAVE_CONFIG_H) +# define ACC_CONFIG_NO_HEADER 1 +#endif +#if defined(LZO_CFG_EXTRA_CONFIG_HEADER) +# include LZO_CFG_EXTRA_CONFIG_HEADER +#endif +#if defined(__LZOCONF_H) || defined(__LZOCONF_H_INCLUDED) +# error "include this file first" +#endif +#include "lzo/lzoconf.h" +#endif + +#if (LZO_VERSION < 0x02000) || !defined(__LZOCONF_H_INCLUDED) +# error "version mismatch" +#endif + +#if (LZO_CC_BORLANDC && LZO_ARCH_I086) +# pragma option -h +#endif + +#if (LZO_CC_MSC && (_MSC_VER >= 1000)) +# pragma warning(disable: 4127 4701) +#endif +#if (LZO_CC_MSC && (_MSC_VER >= 1300)) +# pragma warning(disable: 4820) +# pragma warning(disable: 4514 4710 4711) +#endif + +#if (LZO_CC_SUNPROC) +#if !defined(__cplusplus) +# pragma error_messages(off,E_END_OF_LOOP_CODE_NOT_REACHED) +# pragma error_messages(off,E_LOOP_NOT_ENTERED_AT_TOP) +# pragma error_messages(off,E_STATEMENT_NOT_REACHED) +#endif +#endif + +#if (__LZO_MMODEL_HUGE) && !(LZO_HAVE_MM_HUGE_PTR) +# error "this should not happen - check defines for __huge" +#endif + +#if defined(__LZO_IN_MINILZO) || defined(LZO_CFG_FREESTANDING) +#elif (LZO_OS_DOS16 || LZO_OS_OS216 || LZO_OS_WIN16) +# define ACC_WANT_ACC_INCD_H 1 +# define ACC_WANT_ACC_INCE_H 1 +# define ACC_WANT_ACC_INCI_H 1 +#elif 1 +# include +#else +# define ACC_WANT_ACC_INCD_H 1 +#endif + +#if (LZO_ARCH_I086) +# define ACC_MM_AHSHIFT LZO_MM_AHSHIFT +# define ACC_PTR_FP_OFF(x) (((const unsigned __far*)&(x))[0]) +# define ACC_PTR_FP_SEG(x) (((const unsigned __far*)&(x))[1]) +# define ACC_PTR_MK_FP(s,o) ((void __far*)(((unsigned long)(s)<<16)+(unsigned)(o))) +#endif + +#if !defined(lzo_uintptr_t) +# if defined(__LZO_MMODEL_HUGE) +# define lzo_uintptr_t unsigned long +# elif 1 && defined(LZO_OS_OS400) && (LZO_SIZEOF_VOID_P == 16) +# define __LZO_UINTPTR_T_IS_POINTER 1 + typedef char* lzo_uintptr_t; +# define lzo_uintptr_t lzo_uintptr_t +# elif (LZO_SIZEOF_SIZE_T == LZO_SIZEOF_VOID_P) +# define lzo_uintptr_t size_t +# elif (LZO_SIZEOF_LONG == LZO_SIZEOF_VOID_P) +# define lzo_uintptr_t unsigned long +# elif (LZO_SIZEOF_INT == LZO_SIZEOF_VOID_P) +# define lzo_uintptr_t unsigned int +# elif (LZO_SIZEOF_LONG_LONG == LZO_SIZEOF_VOID_P) +# define lzo_uintptr_t unsigned long long +# else +# define lzo_uintptr_t size_t +# endif +#endif +LZO_COMPILE_TIME_ASSERT_HEADER(sizeof(lzo_uintptr_t) >= sizeof(lzo_voidp)) + +#if 1 && !defined(LZO_CFG_FREESTANDING) +#if 1 && !defined(HAVE_STRING_H) +#define HAVE_STRING_H 1 +#endif +#if 1 && !defined(HAVE_MEMCMP) +#define HAVE_MEMCMP 1 +#endif +#if 1 && !defined(HAVE_MEMCPY) +#define HAVE_MEMCPY 1 +#endif +#if 1 && !defined(HAVE_MEMMOVE) +#define HAVE_MEMMOVE 1 +#endif +#if 1 && !defined(HAVE_MEMSET) +#define HAVE_MEMSET 1 +#endif +#endif + +#if 1 && defined(HAVE_STRING_H) +#include +#endif + +#if (LZO_CFG_FREESTANDING) +# undef HAVE_MEMCMP +# undef HAVE_MEMCPY +# undef HAVE_MEMMOVE +# undef HAVE_MEMSET +#endif + +#if !(HAVE_MEMCMP) +# undef memcmp +# define memcmp(a,b,c) lzo_memcmp(a,b,c) +#elif !(__LZO_MMODEL_HUGE) +# undef lzo_memcmp +# define lzo_memcmp(a,b,c) memcmp(a,b,c) +#endif +#if !(HAVE_MEMCPY) +# undef memcpy +# define memcpy(a,b,c) lzo_memcpy(a,b,c) +#elif !(__LZO_MMODEL_HUGE) +# undef lzo_memcpy +# define lzo_memcpy(a,b,c) memcpy(a,b,c) +#endif +#if !(HAVE_MEMMOVE) +# undef memmove +# define memmove(a,b,c) lzo_memmove(a,b,c) +#elif !(__LZO_MMODEL_HUGE) +# undef lzo_memmove +# define lzo_memmove(a,b,c) memmove(a,b,c) +#endif +#if !(HAVE_MEMSET) +# undef memset +# define memset(a,b,c) lzo_memset(a,b,c) +#elif !(__LZO_MMODEL_HUGE) +# undef lzo_memset +# define lzo_memset(a,b,c) memset(a,b,c) +#endif + +#undef NDEBUG +#if (LZO_CFG_FREESTANDING) +# undef LZO_DEBUG +# define NDEBUG 1 +# undef assert +# define assert(e) ((void)0) +#else +# if !defined(LZO_DEBUG) +# define NDEBUG 1 +# endif +# include +#endif + +#if 0 && defined(__BOUNDS_CHECKING_ON) +# include +#else +# define BOUNDS_CHECKING_OFF_DURING(stmt) stmt +# define BOUNDS_CHECKING_OFF_IN_EXPR(expr) (expr) +#endif + +#if !defined(__lzo_inline) +# define __lzo_inline /*empty*/ +#endif +#if !defined(__lzo_forceinline) +# define __lzo_forceinline /*empty*/ +#endif +#if !defined(__lzo_noinline) +# define __lzo_noinline /*empty*/ +#endif + +#if (LZO_CFG_PGO) +# undef __acc_likely +# undef __acc_unlikely +# undef __lzo_likely +# undef __lzo_unlikely +# define __acc_likely(e) (e) +# define __acc_unlikely(e) (e) +# define __lzo_likely(e) (e) +# define __lzo_unlikely(e) (e) +#endif + +#if 1 +# define LZO_BYTE(x) ((unsigned char) (x)) +#else +# define LZO_BYTE(x) ((unsigned char) ((x) & 0xff)) +#endif + +#define LZO_MAX(a,b) ((a) >= (b) ? (a) : (b)) +#define LZO_MIN(a,b) ((a) <= (b) ? (a) : (b)) +#define LZO_MAX3(a,b,c) ((a) >= (b) ? LZO_MAX(a,c) : LZO_MAX(b,c)) +#define LZO_MIN3(a,b,c) ((a) <= (b) ? LZO_MIN(a,c) : LZO_MIN(b,c)) + +#define lzo_sizeof(type) ((lzo_uint) (sizeof(type))) + +#define LZO_HIGH(array) ((lzo_uint) (sizeof(array)/sizeof(*(array)))) + +#define LZO_SIZE(bits) (1u << (bits)) +#define LZO_MASK(bits) (LZO_SIZE(bits) - 1) + +#define LZO_LSIZE(bits) (1ul << (bits)) +#define LZO_LMASK(bits) (LZO_LSIZE(bits) - 1) + +#define LZO_USIZE(bits) ((lzo_uint) 1 << (bits)) +#define LZO_UMASK(bits) (LZO_USIZE(bits) - 1) + +#if !defined(DMUL) +#if 0 + +# define DMUL(a,b) ((lzo_xint) ((lzo_uint32)(a) * (lzo_uint32)(b))) +#else +# define DMUL(a,b) ((lzo_xint) ((a) * (b))) +#endif +#endif + +#if 1 && !(LZO_CFG_NO_UNALIGNED) +#if 1 && (LZO_ARCH_AMD64 || LZO_ARCH_I386 || LZO_ARCH_POWERPC) +# if (LZO_SIZEOF_SHORT == 2) +# define LZO_UNALIGNED_OK_2 1 +# endif +# if (LZO_SIZEOF_INT == 4) +# define LZO_UNALIGNED_OK_4 1 +# endif +#endif +#endif + +#if defined(LZO_UNALIGNED_OK_2) + LZO_COMPILE_TIME_ASSERT_HEADER(sizeof(short) == 2) +#endif +#if defined(LZO_UNALIGNED_OK_4) + LZO_COMPILE_TIME_ASSERT_HEADER(sizeof(lzo_uint32) == 4) +#elif defined(LZO_ALIGNED_OK_4) + LZO_COMPILE_TIME_ASSERT_HEADER(sizeof(lzo_uint32) == 4) +#endif + +#undef COPY4 +#if defined(LZO_UNALIGNED_OK_4) || defined(LZO_ALIGNED_OK_4) +# if 1 && defined(ACC_UA_COPY32) +# define COPY4(d,s) ACC_UA_COPY32(d,s) +# else +# define COPY4(d,s) (* (__lzo_ua_volatile lzo_uint32p)(__lzo_ua_volatile lzo_voidp)(d) = * (__lzo_ua_volatile const lzo_uint32p)(__lzo_ua_volatile const lzo_voidp)(s)) +# endif +#endif + +#define MEMCPY8_DS(dest,src,len) \ + lzo_memcpy(dest,src,len); dest += len; src += len + +#define BZERO8_PTR(s,l,n) \ + lzo_memset((lzo_voidp)(s),0,(lzo_uint)(l)*(n)) + +#define MEMCPY_DS(dest,src,len) \ + do *dest++ = *src++; while (--len > 0) + +LZO_EXTERN(const lzo_bytep) lzo_copyright(void); + +#ifndef __LZO_PTR_H +#define __LZO_PTR_H 1 + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(lzo_uintptr_t) +# if (__LZO_MMODEL_HUGE) +# define lzo_uintptr_t unsigned long +# else +# define lzo_uintptr_t acc_uintptr_t +# ifdef __ACC_INTPTR_T_IS_POINTER +# define __LZO_UINTPTR_T_IS_POINTER 1 +# endif +# endif +#endif + +#if (LZO_ARCH_I086) +#define PTR(a) ((lzo_bytep) (a)) +#define PTR_ALIGNED_4(a) ((ACC_PTR_FP_OFF(a) & 3) == 0) +#define PTR_ALIGNED2_4(a,b) (((ACC_PTR_FP_OFF(a) | ACC_PTR_FP_OFF(b)) & 3) == 0) +#elif (LZO_MM_PVP) +#define PTR(a) ((lzo_bytep) (a)) +#define PTR_ALIGNED_8(a) ((((lzo_uintptr_t)(a)) >> 61) == 0) +#define PTR_ALIGNED2_8(a,b) ((((lzo_uintptr_t)(a)|(lzo_uintptr_t)(b)) >> 61) == 0) +#else +#define PTR(a) ((lzo_uintptr_t) (a)) +#define PTR_LINEAR(a) PTR(a) +#define PTR_ALIGNED_4(a) ((PTR_LINEAR(a) & 3) == 0) +#define PTR_ALIGNED_8(a) ((PTR_LINEAR(a) & 7) == 0) +#define PTR_ALIGNED2_4(a,b) (((PTR_LINEAR(a) | PTR_LINEAR(b)) & 3) == 0) +#define PTR_ALIGNED2_8(a,b) (((PTR_LINEAR(a) | PTR_LINEAR(b)) & 7) == 0) +#endif + +#define PTR_LT(a,b) (PTR(a) < PTR(b)) +#define PTR_GE(a,b) (PTR(a) >= PTR(b)) +#define PTR_DIFF(a,b) (PTR(a) - PTR(b)) +#define pd(a,b) ((lzo_uint) ((a)-(b))) + +LZO_EXTERN(lzo_uintptr_t) +__lzo_ptr_linear(const lzo_voidp ptr); + +typedef union +{ + char a_char; + unsigned char a_uchar; + short a_short; + unsigned short a_ushort; + int a_int; + unsigned int a_uint; + long a_long; + unsigned long a_ulong; + lzo_int a_lzo_int; + lzo_uint a_lzo_uint; + lzo_int32 a_lzo_int32; + lzo_uint32 a_lzo_uint32; + ptrdiff_t a_ptrdiff_t; + lzo_uintptr_t a_lzo_uintptr_t; + lzo_voidp a_lzo_voidp; + void * a_void_p; + lzo_bytep a_lzo_bytep; + lzo_bytepp a_lzo_bytepp; + lzo_uintp a_lzo_uintp; + lzo_uint * a_lzo_uint_p; + lzo_uint32p a_lzo_uint32p; + lzo_uint32 * a_lzo_uint32_p; + unsigned char * a_uchar_p; + char * a_char_p; +} +lzo_full_align_t; + +#ifdef __cplusplus +} +#endif + +#endif + +#define LZO_DETERMINISTIC 1 + +#define LZO_DICT_USE_PTR 1 +#if 0 && (LZO_ARCH_I086) +# undef LZO_DICT_USE_PTR +#endif + +#if (LZO_DICT_USE_PTR) +# define lzo_dict_t const lzo_bytep +# define lzo_dict_p lzo_dict_t __LZO_MMODEL * +#else +# define lzo_dict_t lzo_uint +# define lzo_dict_p lzo_dict_t __LZO_MMODEL * +#endif + +#endif + +#if !defined(MINILZO_CFG_SKIP_LZO_PTR) + +LZO_PUBLIC(lzo_uintptr_t) +__lzo_ptr_linear(const lzo_voidp ptr) +{ + lzo_uintptr_t p; + +#if (LZO_ARCH_I086) + p = (((lzo_uintptr_t)(ACC_PTR_FP_SEG(ptr))) << (16 - ACC_MM_AHSHIFT)) + (ACC_PTR_FP_OFF(ptr)); +#elif (LZO_MM_PVP) + p = (lzo_uintptr_t) (ptr); + p = (p << 3) | (p >> 61); +#else + p = (lzo_uintptr_t) PTR_LINEAR(ptr); +#endif + + return p; +} + +LZO_PUBLIC(unsigned) +__lzo_align_gap(const lzo_voidp ptr, lzo_uint size) +{ +#if defined(__LZO_UINTPTR_T_IS_POINTER) + size_t n = (size_t) ptr; + n = (((n + size - 1) / size) * size) - n; +#else + lzo_uintptr_t p, n; + p = __lzo_ptr_linear(ptr); + n = (((p + size - 1) / size) * size) - p; +#endif + + assert(size > 0); + assert((long)n >= 0); + assert(n <= size); + return (unsigned)n; +} + +#endif +#if !defined(MINILZO_CFG_SKIP_LZO_UTIL) + +/* If you use the LZO library in a product, I would appreciate that you + * keep this copyright string in the executable of your product. + */ + +static const char __lzo_copyright[] = +#if !defined(__LZO_IN_MINLZO) + LZO_VERSION_STRING; +#else + "\r\n\n" + "LZO data compression library.\n" + "$Copyright: LZO Copyright (C) 1996-2010 Markus Franz Xaver Johannes Oberhumer\n" + "\n" + "http://www.oberhumer.com $\n\n" + "$Id: LZO version: v" LZO_VERSION_STRING ", " LZO_VERSION_DATE " $\n" + "$Info: " LZO_INFO_STRING " $\n"; +#endif + +LZO_PUBLIC(const lzo_bytep) +lzo_copyright(void) +{ +#if (LZO_OS_DOS16 && LZO_CC_TURBOC) + return (lzo_voidp) __lzo_copyright; +#else + return (const lzo_bytep) __lzo_copyright; +#endif +} + +LZO_PUBLIC(unsigned) +lzo_version(void) +{ + return LZO_VERSION; +} + +LZO_PUBLIC(const char *) +lzo_version_string(void) +{ + return LZO_VERSION_STRING; +} + +LZO_PUBLIC(const char *) +lzo_version_date(void) +{ + return LZO_VERSION_DATE; +} + +LZO_PUBLIC(const lzo_charp) +_lzo_version_string(void) +{ + return LZO_VERSION_STRING; +} + +LZO_PUBLIC(const lzo_charp) +_lzo_version_date(void) +{ + return LZO_VERSION_DATE; +} + +#define LZO_BASE 65521u +#define LZO_NMAX 5552 + +#define LZO_DO1(buf,i) s1 += buf[i]; s2 += s1 +#define LZO_DO2(buf,i) LZO_DO1(buf,i); LZO_DO1(buf,i+1); +#define LZO_DO4(buf,i) LZO_DO2(buf,i); LZO_DO2(buf,i+2); +#define LZO_DO8(buf,i) LZO_DO4(buf,i); LZO_DO4(buf,i+4); +#define LZO_DO16(buf,i) LZO_DO8(buf,i); LZO_DO8(buf,i+8); + +LZO_PUBLIC(lzo_uint32) +lzo_adler32(lzo_uint32 adler, const lzo_bytep buf, lzo_uint len) +{ + lzo_uint32 s1 = adler & 0xffff; + lzo_uint32 s2 = (adler >> 16) & 0xffff; + unsigned k; + + if (buf == NULL) + return 1; + + while (len > 0) + { + k = len < LZO_NMAX ? (unsigned) len : LZO_NMAX; + len -= k; + if (k >= 16) do + { + LZO_DO16(buf,0); + buf += 16; + k -= 16; + } while (k >= 16); + if (k != 0) do + { + s1 += *buf++; + s2 += s1; + } while (--k > 0); + s1 %= LZO_BASE; + s2 %= LZO_BASE; + } + return (s2 << 16) | s1; +} + +#undef LZO_DO1 +#undef LZO_DO2 +#undef LZO_DO4 +#undef LZO_DO8 +#undef LZO_DO16 + +#endif +#if !defined(MINILZO_CFG_SKIP_LZO_STRING) +#undef lzo_memcmp +#undef lzo_memcpy +#undef lzo_memmove +#undef lzo_memset +#if !defined(__LZO_MMODEL_HUGE) +# undef LZO_HAVE_MM_HUGE_PTR +#endif +#define lzo_hsize_t lzo_uint +#define lzo_hvoid_p lzo_voidp +#define lzo_hbyte_p lzo_bytep +#define LZOLIB_PUBLIC(r,f) LZO_PUBLIC(r) f +#define lzo_hmemcmp lzo_memcmp +#define lzo_hmemcpy lzo_memcpy +#define lzo_hmemmove lzo_memmove +#define lzo_hmemset lzo_memset +#define __LZOLIB_HMEMCPY_CH_INCLUDED 1 +#if !defined(LZOLIB_PUBLIC) +# define LZOLIB_PUBLIC(r,f) r __LZOLIB_FUNCNAME(f) +#endif +LZOLIB_PUBLIC(int, lzo_hmemcmp) (const lzo_hvoid_p s1, const lzo_hvoid_p s2, lzo_hsize_t len) +{ +#if (LZO_HAVE_MM_HUGE_PTR) || !(HAVE_MEMCMP) + const lzo_hbyte_p p1 = (const lzo_hbyte_p) s1; + const lzo_hbyte_p p2 = (const lzo_hbyte_p) s2; + if __lzo_likely(len > 0) do + { + int d = *p1 - *p2; + if (d != 0) + return d; + p1++; p2++; + } while __lzo_likely(--len > 0); + return 0; +#else + return memcmp(s1, s2, len); +#endif +} +LZOLIB_PUBLIC(lzo_hvoid_p, lzo_hmemcpy) (lzo_hvoid_p dest, const lzo_hvoid_p src, lzo_hsize_t len) +{ +#if (LZO_HAVE_MM_HUGE_PTR) || !(HAVE_MEMCPY) + lzo_hbyte_p p1 = (lzo_hbyte_p) dest; + const lzo_hbyte_p p2 = (const lzo_hbyte_p) src; + if (!(len > 0) || p1 == p2) + return dest; + do + *p1++ = *p2++; + while __lzo_likely(--len > 0); + return dest; +#else + return memcpy(dest, src, len); +#endif +} +LZOLIB_PUBLIC(lzo_hvoid_p, lzo_hmemmove) (lzo_hvoid_p dest, const lzo_hvoid_p src, lzo_hsize_t len) +{ +#if (LZO_HAVE_MM_HUGE_PTR) || !(HAVE_MEMMOVE) + lzo_hbyte_p p1 = (lzo_hbyte_p) dest; + const lzo_hbyte_p p2 = (const lzo_hbyte_p) src; + if (!(len > 0) || p1 == p2) + return dest; + if (p1 < p2) + { + do + *p1++ = *p2++; + while __lzo_likely(--len > 0); + } + else + { + p1 += len; + p2 += len; + do + *--p1 = *--p2; + while __lzo_likely(--len > 0); + } + return dest; +#else + return memmove(dest, src, len); +#endif +} +LZOLIB_PUBLIC(lzo_hvoid_p, lzo_hmemset) (lzo_hvoid_p s, int c, lzo_hsize_t len) +{ +#if (LZO_HAVE_MM_HUGE_PTR) || !(HAVE_MEMSET) + lzo_hbyte_p p = (lzo_hbyte_p) s; + if __lzo_likely(len > 0) do + *p++ = (unsigned char) c; + while __lzo_likely(--len > 0); + return s; +#else + return memset(s, c, len); +#endif +} +#undef LZOLIB_PUBLIC +#endif +#if !defined(MINILZO_CFG_SKIP_LZO_INIT) + +#if !defined(__LZO_IN_MINILZO) + +#define ACC_WANT_ACC_CHK_CH 1 +#undef ACCCHK_ASSERT + + ACCCHK_ASSERT_IS_SIGNED_T(lzo_int) + ACCCHK_ASSERT_IS_UNSIGNED_T(lzo_uint) + + ACCCHK_ASSERT_IS_SIGNED_T(lzo_int32) + ACCCHK_ASSERT_IS_UNSIGNED_T(lzo_uint32) + ACCCHK_ASSERT((LZO_UINT32_C(1) << (int)(8*sizeof(LZO_UINT32_C(1))-1)) > 0) + ACCCHK_ASSERT(sizeof(lzo_uint32) >= 4) + +#if !defined(__LZO_UINTPTR_T_IS_POINTER) + ACCCHK_ASSERT_IS_UNSIGNED_T(lzo_uintptr_t) +#endif + ACCCHK_ASSERT(sizeof(lzo_uintptr_t) >= sizeof(lzo_voidp)) + + ACCCHK_ASSERT_IS_UNSIGNED_T(lzo_xint) + ACCCHK_ASSERT(sizeof(lzo_xint) >= sizeof(lzo_uint32)) + ACCCHK_ASSERT(sizeof(lzo_xint) >= sizeof(lzo_uint)) + ACCCHK_ASSERT(sizeof(lzo_xint) == sizeof(lzo_uint32) || sizeof(lzo_xint) == sizeof(lzo_uint)) + +#endif +#undef ACCCHK_ASSERT + +#if 0 +#define u2p(ptr,off) ((lzo_voidp) (((lzo_bytep)(lzo_voidp)(ptr)) + (off))) +#else +static __lzo_noinline lzo_voidp u2p(lzo_voidp ptr, lzo_uint off) +{ + return (lzo_voidp) ((lzo_bytep) ptr + off); +} +#endif + +LZO_PUBLIC(int) +_lzo_config_check(void) +{ + lzo_bool r = 1; + union { + lzo_xint a[2]; unsigned char b[2*sizeof(lzo_xint)]; + unsigned short x[2]; lzo_uint32 y[2]; lzo_uint z[2]; + } u; + lzo_voidp p; + + u.a[0] = u.a[1] = 0; + p = u2p(&u, 0); + r &= ((* (lzo_bytep) p) == 0); +#if !defined(LZO_CFG_NO_CONFIG_CHECK) +#if defined(LZO_ABI_BIG_ENDIAN) + u.a[0] = u.a[1] = 0; u.b[sizeof(lzo_uint) - 1] = 128; + p = u2p(&u, 0); + r &= ((* (lzo_uintp) p) == 128); +#endif +#if defined(LZO_ABI_LITTLE_ENDIAN) + u.a[0] = u.a[1] = 0; u.b[0] = 128; + p = u2p(&u, 0); + r &= ((* (lzo_uintp) p) == 128); +#endif +#if defined(LZO_UNALIGNED_OK_2) + u.a[0] = u.a[1] = 0; + u.b[0] = 1; u.b[sizeof(unsigned short) + 1] = 2; + p = u2p(&u, 1); + r &= ((* (lzo_ushortp) p) == 0); +#endif +#if defined(LZO_UNALIGNED_OK_4) + u.a[0] = u.a[1] = 0; + u.b[0] = 3; u.b[sizeof(lzo_uint32) + 1] = 4; + p = u2p(&u, 1); + r &= ((* (lzo_uint32p) p) == 0); +#endif +#endif + + return r == 1 ? LZO_E_OK : LZO_E_ERROR; +} + +LZO_PUBLIC(int) +__lzo_init_v2(unsigned v, int s1, int s2, int s3, int s4, int s5, + int s6, int s7, int s8, int s9) +{ + int r; + +#if defined(__LZO_IN_MINILZO) +#elif (LZO_CC_MSC && ((_MSC_VER) < 700)) +#else +#define ACC_WANT_ACC_CHK_CH 1 +#undef ACCCHK_ASSERT +#define ACCCHK_ASSERT(expr) LZO_COMPILE_TIME_ASSERT(expr) +#endif +#undef ACCCHK_ASSERT + + if (v == 0) + return LZO_E_ERROR; + + r = (s1 == -1 || s1 == (int) sizeof(short)) && + (s2 == -1 || s2 == (int) sizeof(int)) && + (s3 == -1 || s3 == (int) sizeof(long)) && + (s4 == -1 || s4 == (int) sizeof(lzo_uint32)) && + (s5 == -1 || s5 == (int) sizeof(lzo_uint)) && + (s6 == -1 || s6 == (int) lzo_sizeof_dict_t) && + (s7 == -1 || s7 == (int) sizeof(char *)) && + (s8 == -1 || s8 == (int) sizeof(lzo_voidp)) && + (s9 == -1 || s9 == (int) sizeof(lzo_callback_t)); + if (!r) + return LZO_E_ERROR; + + r = _lzo_config_check(); + if (r != LZO_E_OK) + return r; + + return r; +} + +#if !defined(__LZO_IN_MINILZO) + +#if (LZO_OS_WIN16 && LZO_CC_WATCOMC) && defined(__SW_BD) + +#if 0 +BOOL FAR PASCAL LibMain ( HANDLE hInstance, WORD wDataSegment, + WORD wHeapSize, LPSTR lpszCmdLine ) +#else +int __far __pascal LibMain ( int a, short b, short c, long d ) +#endif +{ + LZO_UNUSED(a); LZO_UNUSED(b); LZO_UNUSED(c); LZO_UNUSED(d); + return 1; +} + +#endif + +#endif + +#endif + +#define LZO1X 1 +#define LZO_EOF_CODE 1 +#define M2_MAX_OFFSET 0x0800 + +#if !defined(MINILZO_CFG_SKIP_LZO1X_1_COMPRESS) + +#define LZO_NEED_DICT_H 1 +#define D_BITS 14 +#define D_INDEX1(d,p) d = DM(DMUL(0x21,DX3(p,5,5,6)) >> 5) +#define D_INDEX2(d,p) d = (d & (D_MASK & 0x7ff)) ^ (D_HIGH | 0x1f) + +#ifndef __LZO_CONFIG1X_H +#define __LZO_CONFIG1X_H 1 + +#if !defined(LZO1X) && !defined(LZO1Y) && !defined(LZO1Z) +# define LZO1X 1 +#endif + +#if !defined(__LZO_IN_MINILZO) +#include "lzo/lzo1x.h" +#endif + +#ifndef LZO_EOF_CODE +#define LZO_EOF_CODE 1 +#endif +#undef LZO_DETERMINISTIC + +#define M1_MAX_OFFSET 0x0400 +#ifndef M2_MAX_OFFSET +#define M2_MAX_OFFSET 0x0800 +#endif +#define M3_MAX_OFFSET 0x4000 +#define M4_MAX_OFFSET 0xbfff + +#define MX_MAX_OFFSET (M1_MAX_OFFSET + M2_MAX_OFFSET) + +#define M1_MIN_LEN 2 +#define M1_MAX_LEN 2 +#define M2_MIN_LEN 3 +#ifndef M2_MAX_LEN +#define M2_MAX_LEN 8 +#endif +#define M3_MIN_LEN 3 +#define M3_MAX_LEN 33 +#define M4_MIN_LEN 3 +#define M4_MAX_LEN 9 + +#define M1_MARKER 0 +#define M2_MARKER 64 +#define M3_MARKER 32 +#define M4_MARKER 16 + +#ifndef MIN_LOOKAHEAD +#define MIN_LOOKAHEAD (M2_MAX_LEN + 1) +#endif + +#if defined(LZO_NEED_DICT_H) + +#ifndef LZO_HASH +#define LZO_HASH LZO_HASH_LZO_INCREMENTAL_B +#endif +#define DL_MIN_LEN M2_MIN_LEN + +#ifndef __LZO_DICT_H +#define __LZO_DICT_H 1 + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(D_BITS) && defined(DBITS) +# define D_BITS DBITS +#endif +#if !defined(D_BITS) +# error "D_BITS is not defined" +#endif +#if (D_BITS < 16) +# define D_SIZE LZO_SIZE(D_BITS) +# define D_MASK LZO_MASK(D_BITS) +#else +# define D_SIZE LZO_USIZE(D_BITS) +# define D_MASK LZO_UMASK(D_BITS) +#endif +#define D_HIGH ((D_MASK >> 1) + 1) + +#if !defined(DD_BITS) +# define DD_BITS 0 +#endif +#define DD_SIZE LZO_SIZE(DD_BITS) +#define DD_MASK LZO_MASK(DD_BITS) + +#if !defined(DL_BITS) +# define DL_BITS (D_BITS - DD_BITS) +#endif +#if (DL_BITS < 16) +# define DL_SIZE LZO_SIZE(DL_BITS) +# define DL_MASK LZO_MASK(DL_BITS) +#else +# define DL_SIZE LZO_USIZE(DL_BITS) +# define DL_MASK LZO_UMASK(DL_BITS) +#endif + +#if (D_BITS != DL_BITS + DD_BITS) +# error "D_BITS does not match" +#endif +#if (D_BITS < 6 || D_BITS > 18) +# error "invalid D_BITS" +#endif +#if (DL_BITS < 6 || DL_BITS > 20) +# error "invalid DL_BITS" +#endif +#if (DD_BITS < 0 || DD_BITS > 6) +# error "invalid DD_BITS" +#endif + +#if !defined(DL_MIN_LEN) +# define DL_MIN_LEN 3 +#endif +#if !defined(DL_SHIFT) +# define DL_SHIFT ((DL_BITS + (DL_MIN_LEN - 1)) / DL_MIN_LEN) +#endif + +#define LZO_HASH_GZIP 1 +#define LZO_HASH_GZIP_INCREMENTAL 2 +#define LZO_HASH_LZO_INCREMENTAL_A 3 +#define LZO_HASH_LZO_INCREMENTAL_B 4 + +#if !defined(LZO_HASH) +# error "choose a hashing strategy" +#endif + +#undef DM +#undef DX + +#if (DL_MIN_LEN == 3) +# define _DV2_A(p,shift1,shift2) \ + (((( (lzo_xint)((p)[0]) << shift1) ^ (p)[1]) << shift2) ^ (p)[2]) +# define _DV2_B(p,shift1,shift2) \ + (((( (lzo_xint)((p)[2]) << shift1) ^ (p)[1]) << shift2) ^ (p)[0]) +# define _DV3_B(p,shift1,shift2,shift3) \ + ((_DV2_B((p)+1,shift1,shift2) << (shift3)) ^ (p)[0]) +#elif (DL_MIN_LEN == 2) +# define _DV2_A(p,shift1,shift2) \ + (( (lzo_xint)(p[0]) << shift1) ^ p[1]) +# define _DV2_B(p,shift1,shift2) \ + (( (lzo_xint)(p[1]) << shift1) ^ p[2]) +#else +# error "invalid DL_MIN_LEN" +#endif +#define _DV_A(p,shift) _DV2_A(p,shift,shift) +#define _DV_B(p,shift) _DV2_B(p,shift,shift) +#define DA2(p,s1,s2) \ + (((((lzo_xint)((p)[2]) << (s2)) + (p)[1]) << (s1)) + (p)[0]) +#define DS2(p,s1,s2) \ + (((((lzo_xint)((p)[2]) << (s2)) - (p)[1]) << (s1)) - (p)[0]) +#define DX2(p,s1,s2) \ + (((((lzo_xint)((p)[2]) << (s2)) ^ (p)[1]) << (s1)) ^ (p)[0]) +#define DA3(p,s1,s2,s3) ((DA2((p)+1,s2,s3) << (s1)) + (p)[0]) +#define DS3(p,s1,s2,s3) ((DS2((p)+1,s2,s3) << (s1)) - (p)[0]) +#define DX3(p,s1,s2,s3) ((DX2((p)+1,s2,s3) << (s1)) ^ (p)[0]) +#define DMS(v,s) ((lzo_uint) (((v) & (D_MASK >> (s))) << (s))) +#define DM(v) DMS(v,0) + +#if (LZO_HASH == LZO_HASH_GZIP) +# define _DINDEX(dv,p) (_DV_A((p),DL_SHIFT)) + +#elif (LZO_HASH == LZO_HASH_GZIP_INCREMENTAL) +# define __LZO_HASH_INCREMENTAL 1 +# define DVAL_FIRST(dv,p) dv = _DV_A((p),DL_SHIFT) +# define DVAL_NEXT(dv,p) dv = (((dv) << DL_SHIFT) ^ p[2]) +# define _DINDEX(dv,p) (dv) +# define DVAL_LOOKAHEAD DL_MIN_LEN + +#elif (LZO_HASH == LZO_HASH_LZO_INCREMENTAL_A) +# define __LZO_HASH_INCREMENTAL 1 +# define DVAL_FIRST(dv,p) dv = _DV_A((p),5) +# define DVAL_NEXT(dv,p) \ + dv ^= (lzo_xint)(p[-1]) << (2*5); dv = (((dv) << 5) ^ p[2]) +# define _DINDEX(dv,p) ((DMUL(0x9f5f,dv)) >> 5) +# define DVAL_LOOKAHEAD DL_MIN_LEN + +#elif (LZO_HASH == LZO_HASH_LZO_INCREMENTAL_B) +# define __LZO_HASH_INCREMENTAL 1 +# define DVAL_FIRST(dv,p) dv = _DV_B((p),5) +# define DVAL_NEXT(dv,p) \ + dv ^= p[-1]; dv = (((dv) >> 5) ^ ((lzo_xint)(p[2]) << (2*5))) +# define _DINDEX(dv,p) ((DMUL(0x9f5f,dv)) >> 5) +# define DVAL_LOOKAHEAD DL_MIN_LEN + +#else +# error "choose a hashing strategy" +#endif + +#ifndef DINDEX +#define DINDEX(dv,p) ((lzo_uint)((_DINDEX(dv,p)) & DL_MASK) << DD_BITS) +#endif +#if !defined(DINDEX1) && defined(D_INDEX1) +#define DINDEX1 D_INDEX1 +#endif +#if !defined(DINDEX2) && defined(D_INDEX2) +#define DINDEX2 D_INDEX2 +#endif + +#if !defined(__LZO_HASH_INCREMENTAL) +# define DVAL_FIRST(dv,p) ((void) 0) +# define DVAL_NEXT(dv,p) ((void) 0) +# define DVAL_LOOKAHEAD 0 +#endif + +#if !defined(DVAL_ASSERT) +#if defined(__LZO_HASH_INCREMENTAL) && !defined(NDEBUG) +#if (LZO_CC_CLANG || (LZO_CC_GNUC >= 0x020700ul) || LZO_CC_LLVM) +static void __attribute__((__unused__)) +#else +static void +#endif +DVAL_ASSERT(lzo_xint dv, const lzo_bytep p) +{ + lzo_xint df; + DVAL_FIRST(df,(p)); + assert(DINDEX(dv,p) == DINDEX(df,p)); +} +#else +# define DVAL_ASSERT(dv,p) ((void) 0) +#endif +#endif + +#if defined(LZO_DICT_USE_PTR) +# define DENTRY(p,in) (p) +# define GINDEX(m_pos,m_off,dict,dindex,in) m_pos = dict[dindex] +#else +# define DENTRY(p,in) ((lzo_uint) ((p)-(in))) +# define GINDEX(m_pos,m_off,dict,dindex,in) m_off = dict[dindex] +#endif + +#if (DD_BITS == 0) + +# define UPDATE_D(dict,drun,dv,p,in) dict[ DINDEX(dv,p) ] = DENTRY(p,in) +# define UPDATE_I(dict,drun,index,p,in) dict[index] = DENTRY(p,in) +# define UPDATE_P(ptr,drun,p,in) (ptr)[0] = DENTRY(p,in) + +#else + +# define UPDATE_D(dict,drun,dv,p,in) \ + dict[ DINDEX(dv,p) + drun++ ] = DENTRY(p,in); drun &= DD_MASK +# define UPDATE_I(dict,drun,index,p,in) \ + dict[ (index) + drun++ ] = DENTRY(p,in); drun &= DD_MASK +# define UPDATE_P(ptr,drun,p,in) \ + (ptr) [ drun++ ] = DENTRY(p,in); drun &= DD_MASK + +#endif + +#if defined(LZO_DICT_USE_PTR) + +#define LZO_CHECK_MPOS_DET(m_pos,m_off,in,ip,max_offset) \ + (m_pos == NULL || (m_off = pd(ip, m_pos)) > max_offset) + +#define LZO_CHECK_MPOS_NON_DET(m_pos,m_off,in,ip,max_offset) \ + (BOUNDS_CHECKING_OFF_IN_EXPR(( \ + m_pos = ip - (lzo_uint) PTR_DIFF(ip,m_pos), \ + PTR_LT(m_pos,in) || \ + (m_off = (lzo_uint) PTR_DIFF(ip,m_pos)) == 0 || \ + m_off > max_offset ))) + +#else + +#define LZO_CHECK_MPOS_DET(m_pos,m_off,in,ip,max_offset) \ + (m_off == 0 || \ + ((m_off = pd(ip, in) - m_off) > max_offset) || \ + (m_pos = (ip) - (m_off), 0) ) + +#define LZO_CHECK_MPOS_NON_DET(m_pos,m_off,in,ip,max_offset) \ + (pd(ip, in) <= m_off || \ + ((m_off = pd(ip, in) - m_off) > max_offset) || \ + (m_pos = (ip) - (m_off), 0) ) + +#endif + +#if defined(LZO_DETERMINISTIC) +# define LZO_CHECK_MPOS LZO_CHECK_MPOS_DET +#else +# define LZO_CHECK_MPOS LZO_CHECK_MPOS_NON_DET +#endif + +#ifdef __cplusplus +} +#endif + +#endif + +#endif + +#endif + +#define do_compress _lzo1x_1_do_compress +#define DO_COMPRESS lzo1x_1_compress + +#if 1 && defined(DO_COMPRESS) && !defined(do_compress) +# define do_compress LZO_CPP_ECONCAT2(DO_COMPRESS,_core) +#endif + +static __lzo_noinline lzo_uint +do_compress ( const lzo_bytep in , lzo_uint in_len, + lzo_bytep out, lzo_uintp out_len, + lzo_voidp wrkmem ) +{ + register const lzo_bytep ip; + lzo_bytep op; + const lzo_bytep const in_end = in + in_len; + const lzo_bytep const ip_end = in + in_len - M2_MAX_LEN - 5; + const lzo_bytep ii; + lzo_dict_p const dict = (lzo_dict_p) wrkmem; + + op = out; + ip = in; + ii = ip; + + ip += 4; + for (;;) + { + register const lzo_bytep m_pos; + LZO_DEFINE_UNINITIALIZED_VAR(lzo_uint, m_off, 0); + lzo_uint m_len; + lzo_uint dindex; + + DINDEX1(dindex,ip); + GINDEX(m_pos,m_off,dict,dindex,in); + if (LZO_CHECK_MPOS_NON_DET(m_pos,m_off,in,ip,M4_MAX_OFFSET)) + goto literal; +#if 1 + if (m_off <= M2_MAX_OFFSET || m_pos[3] == ip[3]) + goto try_match; + DINDEX2(dindex,ip); +#endif + GINDEX(m_pos,m_off,dict,dindex,in); + if (LZO_CHECK_MPOS_NON_DET(m_pos,m_off,in,ip,M4_MAX_OFFSET)) + goto literal; + if (m_off <= M2_MAX_OFFSET || m_pos[3] == ip[3]) + goto try_match; + goto literal; + +try_match: +#if 1 && defined(LZO_UNALIGNED_OK_2) + if (* (const lzo_ushortp) (const lzo_voidp) m_pos != * (const lzo_ushortp) (const lzo_voidp) ip) +#else + if (m_pos[0] != ip[0] || m_pos[1] != ip[1]) +#endif + { + } + else + { + if __lzo_likely(m_pos[2] == ip[2]) + { +#if 0 + if (m_off <= M2_MAX_OFFSET) + goto match; + if (lit <= 3) + goto match; + if (lit == 3) + { + assert(op - 2 > out); op[-2] |= LZO_BYTE(3); + *op++ = *ii++; *op++ = *ii++; *op++ = *ii++; + goto code_match; + } + if (m_pos[3] == ip[3]) +#endif + goto match; + } + else + { +#if 0 +#if 0 + if (m_off <= M1_MAX_OFFSET && lit > 0 && lit <= 3) +#else + if (m_off <= M1_MAX_OFFSET && lit == 3) +#endif + { + register lzo_uint t; + + t = lit; + assert(op - 2 > out); op[-2] |= LZO_BYTE(t); + do *op++ = *ii++; while (--t > 0); + assert(ii == ip); + m_off -= 1; + *op++ = LZO_BYTE(M1_MARKER | ((m_off & 3) << 2)); + *op++ = LZO_BYTE(m_off >> 2); + ip += 2; + goto match_done; + } +#endif + } + } + +literal: + UPDATE_I(dict,0,dindex,ip,in); + ++ip; + if __lzo_unlikely(ip >= ip_end) + break; + continue; + +match: + UPDATE_I(dict,0,dindex,ip,in); + if (pd(ip,ii) > 0) + { + register lzo_uint t = pd(ip,ii); + + if (t <= 3) + { + assert(op - 2 > out); + op[-2] |= LZO_BYTE(t); + } + else if (t <= 18) + *op++ = LZO_BYTE(t - 3); + else + { + register lzo_uint tt = t - 18; + + *op++ = 0; + while (tt > 255) + { + tt -= 255; + *op++ = 0; + } + assert(tt > 0); + *op++ = LZO_BYTE(tt); + } + do *op++ = *ii++; while (--t > 0); + } + + assert(ii == ip); + ip += 3; + if (m_pos[3] != *ip++ || m_pos[4] != *ip++ || m_pos[5] != *ip++ || + m_pos[6] != *ip++ || m_pos[7] != *ip++ || m_pos[8] != *ip++ +#ifdef LZO1Y + || m_pos[ 9] != *ip++ || m_pos[10] != *ip++ || m_pos[11] != *ip++ + || m_pos[12] != *ip++ || m_pos[13] != *ip++ || m_pos[14] != *ip++ +#endif + ) + { + --ip; + m_len = pd(ip, ii); + assert(m_len >= 3); assert(m_len <= M2_MAX_LEN); + + if (m_off <= M2_MAX_OFFSET) + { + m_off -= 1; +#if defined(LZO1X) + *op++ = LZO_BYTE(((m_len - 1) << 5) | ((m_off & 7) << 2)); + *op++ = LZO_BYTE(m_off >> 3); +#elif defined(LZO1Y) + *op++ = LZO_BYTE(((m_len + 1) << 4) | ((m_off & 3) << 2)); + *op++ = LZO_BYTE(m_off >> 2); +#endif + } + else if (m_off <= M3_MAX_OFFSET) + { + m_off -= 1; + *op++ = LZO_BYTE(M3_MARKER | (m_len - 2)); + goto m3_m4_offset; + } + else +#if defined(LZO1X) + { + m_off -= 0x4000; + assert(m_off > 0); assert(m_off <= 0x7fff); + *op++ = LZO_BYTE(M4_MARKER | + ((m_off & 0x4000) >> 11) | (m_len - 2)); + goto m3_m4_offset; + } +#elif defined(LZO1Y) + goto m4_match; +#endif + } + else + { + { + const lzo_bytep end = in_end; + const lzo_bytep m = m_pos + M2_MAX_LEN + 1; + while (ip < end && *m == *ip) + m++, ip++; + m_len = pd(ip, ii); + } + assert(m_len > M2_MAX_LEN); + + if (m_off <= M3_MAX_OFFSET) + { + m_off -= 1; + if (m_len <= 33) + *op++ = LZO_BYTE(M3_MARKER | (m_len - 2)); + else + { + m_len -= 33; + *op++ = M3_MARKER | 0; + goto m3_m4_len; + } + } + else + { +#if defined(LZO1Y) +m4_match: +#endif + m_off -= 0x4000; + assert(m_off > 0); assert(m_off <= 0x7fff); + if (m_len <= M4_MAX_LEN) + *op++ = LZO_BYTE(M4_MARKER | + ((m_off & 0x4000) >> 11) | (m_len - 2)); + else + { + m_len -= M4_MAX_LEN; + *op++ = LZO_BYTE(M4_MARKER | ((m_off & 0x4000) >> 11)); +m3_m4_len: + while (m_len > 255) + { + m_len -= 255; + *op++ = 0; + } + assert(m_len > 0); + *op++ = LZO_BYTE(m_len); + } + } + +m3_m4_offset: + *op++ = LZO_BYTE((m_off & 63) << 2); + *op++ = LZO_BYTE(m_off >> 6); + } + +#if 0 +match_done: +#endif + ii = ip; + if __lzo_unlikely(ip >= ip_end) + break; + } + + *out_len = pd(op, out); + return pd(in_end,ii); +} + +LZO_PUBLIC(int) +DO_COMPRESS ( const lzo_bytep in , lzo_uint in_len, + lzo_bytep out, lzo_uintp out_len, + lzo_voidp wrkmem ) +{ + lzo_bytep op = out; + lzo_uint t; + + if __lzo_unlikely(in_len <= M2_MAX_LEN + 5) + t = in_len; + else + { + t = do_compress(in,in_len,op,out_len,wrkmem); + op += *out_len; + } + + if (t > 0) + { + const lzo_bytep ii = in + in_len - t; + + if (op == out && t <= 238) + *op++ = LZO_BYTE(17 + t); + else if (t <= 3) + op[-2] |= LZO_BYTE(t); + else if (t <= 18) + *op++ = LZO_BYTE(t - 3); + else + { + lzo_uint tt = t - 18; + + *op++ = 0; + while (tt > 255) + { + tt -= 255; + *op++ = 0; + } + assert(tt > 0); + *op++ = LZO_BYTE(tt); + } + do *op++ = *ii++; while (--t > 0); + } + + *op++ = M4_MARKER | 1; + *op++ = 0; + *op++ = 0; + + *out_len = pd(op, out); + return LZO_E_OK; +} + +#endif + +#undef do_compress +#undef DO_COMPRESS +#undef LZO_HASH + +#undef LZO_TEST_OVERRUN +#undef DO_DECOMPRESS +#define DO_DECOMPRESS lzo1x_decompress + +#if !defined(MINILZO_CFG_SKIP_LZO1X_DECOMPRESS) + +#if defined(LZO_TEST_OVERRUN) +# if !defined(LZO_TEST_OVERRUN_INPUT) +# define LZO_TEST_OVERRUN_INPUT 2 +# endif +# if !defined(LZO_TEST_OVERRUN_OUTPUT) +# define LZO_TEST_OVERRUN_OUTPUT 2 +# endif +# if !defined(LZO_TEST_OVERRUN_LOOKBEHIND) +# define LZO_TEST_OVERRUN_LOOKBEHIND 1 +# endif +#endif + +#undef TEST_IP +#undef TEST_OP +#undef TEST_LB +#undef TEST_LBO +#undef NEED_IP +#undef NEED_OP +#undef HAVE_TEST_IP +#undef HAVE_TEST_OP +#undef HAVE_NEED_IP +#undef HAVE_NEED_OP +#undef HAVE_ANY_IP +#undef HAVE_ANY_OP + +#if defined(LZO_TEST_OVERRUN_INPUT) +# if (LZO_TEST_OVERRUN_INPUT >= 1) +# define TEST_IP (ip < ip_end) +# endif +# if (LZO_TEST_OVERRUN_INPUT >= 2) +# define NEED_IP(x) \ + if ((lzo_uint)(ip_end - ip) < (lzo_uint)(x)) goto input_overrun +# endif +#endif + +#if defined(LZO_TEST_OVERRUN_OUTPUT) +# if (LZO_TEST_OVERRUN_OUTPUT >= 1) +# define TEST_OP (op <= op_end) +# endif +# if (LZO_TEST_OVERRUN_OUTPUT >= 2) +# undef TEST_OP +# define NEED_OP(x) \ + if ((lzo_uint)(op_end - op) < (lzo_uint)(x)) goto output_overrun +# endif +#endif + +#if defined(LZO_TEST_OVERRUN_LOOKBEHIND) +# define TEST_LB(m_pos) if (m_pos < out || m_pos >= op) goto lookbehind_overrun +# define TEST_LBO(m_pos,o) if (m_pos < out || m_pos >= op - (o)) goto lookbehind_overrun +#else +# define TEST_LB(m_pos) ((void) 0) +# define TEST_LBO(m_pos,o) ((void) 0) +#endif + +#if !defined(LZO_EOF_CODE) && !defined(TEST_IP) +# define TEST_IP (ip < ip_end) +#endif + +#if defined(TEST_IP) +# define HAVE_TEST_IP 1 +#else +# define TEST_IP 1 +#endif +#if defined(TEST_OP) +# define HAVE_TEST_OP 1 +#else +# define TEST_OP 1 +#endif + +#if defined(NEED_IP) +# define HAVE_NEED_IP 1 +#else +# define NEED_IP(x) ((void) 0) +#endif +#if defined(NEED_OP) +# define HAVE_NEED_OP 1 +#else +# define NEED_OP(x) ((void) 0) +#endif + +#if defined(HAVE_TEST_IP) || defined(HAVE_NEED_IP) +# define HAVE_ANY_IP 1 +#endif +#if defined(HAVE_TEST_OP) || defined(HAVE_NEED_OP) +# define HAVE_ANY_OP 1 +#endif + +#if defined(DO_DECOMPRESS) +LZO_PUBLIC(int) +DO_DECOMPRESS ( const lzo_bytep in , lzo_uint in_len, + lzo_bytep out, lzo_uintp out_len, + lzo_voidp wrkmem ) +#endif +{ + register lzo_bytep op; + register const lzo_bytep ip; + register lzo_uint t; +#if defined(COPY_DICT) + lzo_uint m_off; + const lzo_bytep dict_end; +#else + register const lzo_bytep m_pos; +#endif + + const lzo_bytep const ip_end = in + in_len; +#if defined(HAVE_ANY_OP) + lzo_bytep const op_end = out + *out_len; +#endif +#if defined(LZO1Z) + lzo_uint last_m_off = 0; +#endif + + LZO_UNUSED(wrkmem); + +#if defined(COPY_DICT) + if (dict) + { + if (dict_len > M4_MAX_OFFSET) + { + dict += dict_len - M4_MAX_OFFSET; + dict_len = M4_MAX_OFFSET; + } + dict_end = dict + dict_len; + } + else + { + dict_len = 0; + dict_end = NULL; + } +#endif + + *out_len = 0; + + op = out; + ip = in; + + if (*ip > 17) + { + t = *ip++ - 17; + if (t < 4) + goto match_next; + assert(t > 0); NEED_OP(t); NEED_IP(t+1); + do *op++ = *ip++; while (--t > 0); + goto first_literal_run; + } + + while (TEST_IP && TEST_OP) + { + t = *ip++; + if (t >= 16) + goto match; + if (t == 0) + { + NEED_IP(1); + while (*ip == 0) + { + t += 255; + ip++; + NEED_IP(1); + } + t += 15 + *ip++; + } + assert(t > 0); NEED_OP(t+3); NEED_IP(t+4); +#if defined(LZO_UNALIGNED_OK_4) || defined(LZO_ALIGNED_OK_4) +#if !defined(LZO_UNALIGNED_OK_4) + if (PTR_ALIGNED2_4(op,ip)) + { +#endif + COPY4(op,ip); + op += 4; ip += 4; + if (--t > 0) + { + if (t >= 4) + { + do { + COPY4(op,ip); + op += 4; ip += 4; t -= 4; + } while (t >= 4); + if (t > 0) do *op++ = *ip++; while (--t > 0); + } + else + do *op++ = *ip++; while (--t > 0); + } +#if !defined(LZO_UNALIGNED_OK_4) + } + else +#endif +#endif +#if !defined(LZO_UNALIGNED_OK_4) + { + *op++ = *ip++; *op++ = *ip++; *op++ = *ip++; + do *op++ = *ip++; while (--t > 0); + } +#endif + +first_literal_run: + + t = *ip++; + if (t >= 16) + goto match; +#if defined(COPY_DICT) +#if defined(LZO1Z) + m_off = (1 + M2_MAX_OFFSET) + (t << 6) + (*ip++ >> 2); + last_m_off = m_off; +#else + m_off = (1 + M2_MAX_OFFSET) + (t >> 2) + (*ip++ << 2); +#endif + NEED_OP(3); + t = 3; COPY_DICT(t,m_off) +#else +#if defined(LZO1Z) + t = (1 + M2_MAX_OFFSET) + (t << 6) + (*ip++ >> 2); + m_pos = op - t; + last_m_off = t; +#else + m_pos = op - (1 + M2_MAX_OFFSET); + m_pos -= t >> 2; + m_pos -= *ip++ << 2; +#endif + TEST_LB(m_pos); NEED_OP(3); + *op++ = *m_pos++; *op++ = *m_pos++; *op++ = *m_pos; +#endif + goto match_done; + + do { +match: + if (t >= 64) + { +#if defined(COPY_DICT) +#if defined(LZO1X) + m_off = 1 + ((t >> 2) & 7) + (*ip++ << 3); + t = (t >> 5) - 1; +#elif defined(LZO1Y) + m_off = 1 + ((t >> 2) & 3) + (*ip++ << 2); + t = (t >> 4) - 3; +#elif defined(LZO1Z) + m_off = t & 0x1f; + if (m_off >= 0x1c) + m_off = last_m_off; + else + { + m_off = 1 + (m_off << 6) + (*ip++ >> 2); + last_m_off = m_off; + } + t = (t >> 5) - 1; +#endif +#else +#if defined(LZO1X) + m_pos = op - 1; + m_pos -= (t >> 2) & 7; + m_pos -= *ip++ << 3; + t = (t >> 5) - 1; +#elif defined(LZO1Y) + m_pos = op - 1; + m_pos -= (t >> 2) & 3; + m_pos -= *ip++ << 2; + t = (t >> 4) - 3; +#elif defined(LZO1Z) + { + lzo_uint off = t & 0x1f; + m_pos = op; + if (off >= 0x1c) + { + assert(last_m_off > 0); + m_pos -= last_m_off; + } + else + { + off = 1 + (off << 6) + (*ip++ >> 2); + m_pos -= off; + last_m_off = off; + } + } + t = (t >> 5) - 1; +#endif + TEST_LB(m_pos); assert(t > 0); NEED_OP(t+3-1); + goto copy_match; +#endif + } + else if (t >= 32) + { + t &= 31; + if (t == 0) + { + NEED_IP(1); + while (*ip == 0) + { + t += 255; + ip++; + NEED_IP(1); + } + t += 31 + *ip++; + } +#if defined(COPY_DICT) +#if defined(LZO1Z) + m_off = 1 + (ip[0] << 6) + (ip[1] >> 2); + last_m_off = m_off; +#else + m_off = 1 + (ip[0] >> 2) + (ip[1] << 6); +#endif +#else +#if defined(LZO1Z) + { + lzo_uint off = 1 + (ip[0] << 6) + (ip[1] >> 2); + m_pos = op - off; + last_m_off = off; + } +#elif defined(LZO_UNALIGNED_OK_2) && defined(LZO_ABI_LITTLE_ENDIAN) + m_pos = op - 1; + m_pos -= (* (const lzo_ushortp) (const lzo_voidp) ip) >> 2; +#else + m_pos = op - 1; + m_pos -= (ip[0] >> 2) + (ip[1] << 6); +#endif +#endif + ip += 2; + } + else if (t >= 16) + { +#if defined(COPY_DICT) + m_off = (t & 8) << 11; +#else + m_pos = op; + m_pos -= (t & 8) << 11; +#endif + t &= 7; + if (t == 0) + { + NEED_IP(1); + while (*ip == 0) + { + t += 255; + ip++; + NEED_IP(1); + } + t += 7 + *ip++; + } +#if defined(COPY_DICT) +#if defined(LZO1Z) + m_off += (ip[0] << 6) + (ip[1] >> 2); +#else + m_off += (ip[0] >> 2) + (ip[1] << 6); +#endif + ip += 2; + if (m_off == 0) + goto eof_found; + m_off += 0x4000; +#if defined(LZO1Z) + last_m_off = m_off; +#endif +#else +#if defined(LZO1Z) + m_pos -= (ip[0] << 6) + (ip[1] >> 2); +#elif defined(LZO_UNALIGNED_OK_2) && defined(LZO_ABI_LITTLE_ENDIAN) + m_pos -= (* (const lzo_ushortp) (const lzo_voidp) ip) >> 2; +#else + m_pos -= (ip[0] >> 2) + (ip[1] << 6); +#endif + ip += 2; + if (m_pos == op) + goto eof_found; + m_pos -= 0x4000; +#if defined(LZO1Z) + last_m_off = pd((const lzo_bytep)op, m_pos); +#endif +#endif + } + else + { +#if defined(COPY_DICT) +#if defined(LZO1Z) + m_off = 1 + (t << 6) + (*ip++ >> 2); + last_m_off = m_off; +#else + m_off = 1 + (t >> 2) + (*ip++ << 2); +#endif + NEED_OP(2); + t = 2; COPY_DICT(t,m_off) +#else +#if defined(LZO1Z) + t = 1 + (t << 6) + (*ip++ >> 2); + m_pos = op - t; + last_m_off = t; +#else + m_pos = op - 1; + m_pos -= t >> 2; + m_pos -= *ip++ << 2; +#endif + TEST_LB(m_pos); NEED_OP(2); + *op++ = *m_pos++; *op++ = *m_pos; +#endif + goto match_done; + } + +#if defined(COPY_DICT) + + NEED_OP(t+3-1); + t += 3-1; COPY_DICT(t,m_off) + +#else + + TEST_LB(m_pos); assert(t > 0); NEED_OP(t+3-1); +#if defined(LZO_UNALIGNED_OK_4) || defined(LZO_ALIGNED_OK_4) +#if !defined(LZO_UNALIGNED_OK_4) + if (t >= 2 * 4 - (3 - 1) && PTR_ALIGNED2_4(op,m_pos)) + { + assert((op - m_pos) >= 4); +#else + if (t >= 2 * 4 - (3 - 1) && (op - m_pos) >= 4) + { +#endif + COPY4(op,m_pos); + op += 4; m_pos += 4; t -= 4 - (3 - 1); + do { + COPY4(op,m_pos); + op += 4; m_pos += 4; t -= 4; + } while (t >= 4); + if (t > 0) do *op++ = *m_pos++; while (--t > 0); + } + else +#endif + { +copy_match: + *op++ = *m_pos++; *op++ = *m_pos++; + do *op++ = *m_pos++; while (--t > 0); + } + +#endif + +match_done: +#if defined(LZO1Z) + t = ip[-1] & 3; +#else + t = ip[-2] & 3; +#endif + if (t == 0) + break; + +match_next: + assert(t > 0); assert(t < 4); NEED_OP(t); NEED_IP(t+1); +#if 0 + do *op++ = *ip++; while (--t > 0); +#else + *op++ = *ip++; + if (t > 1) { *op++ = *ip++; if (t > 2) { *op++ = *ip++; } } +#endif + t = *ip++; + } while (TEST_IP && TEST_OP); + } + +#if defined(HAVE_TEST_IP) || defined(HAVE_TEST_OP) + *out_len = pd(op, out); + return LZO_E_EOF_NOT_FOUND; +#endif + +eof_found: + assert(t == 1); + *out_len = pd(op, out); + return (ip == ip_end ? LZO_E_OK : + (ip < ip_end ? LZO_E_INPUT_NOT_CONSUMED : LZO_E_INPUT_OVERRUN)); + +#if defined(HAVE_NEED_IP) +input_overrun: + *out_len = pd(op, out); + return LZO_E_INPUT_OVERRUN; +#endif + +#if defined(HAVE_NEED_OP) +output_overrun: + *out_len = pd(op, out); + return LZO_E_OUTPUT_OVERRUN; +#endif + +#if defined(LZO_TEST_OVERRUN_LOOKBEHIND) +lookbehind_overrun: + *out_len = pd(op, out); + return LZO_E_LOOKBEHIND_OVERRUN; +#endif +} + +#endif + +#define LZO_TEST_OVERRUN 1 +#undef DO_DECOMPRESS +#define DO_DECOMPRESS lzo1x_decompress_safe + +#if !defined(MINILZO_CFG_SKIP_LZO1X_DECOMPRESS_SAFE) + +#if defined(LZO_TEST_OVERRUN) +# if !defined(LZO_TEST_OVERRUN_INPUT) +# define LZO_TEST_OVERRUN_INPUT 2 +# endif +# if !defined(LZO_TEST_OVERRUN_OUTPUT) +# define LZO_TEST_OVERRUN_OUTPUT 2 +# endif +# if !defined(LZO_TEST_OVERRUN_LOOKBEHIND) +# define LZO_TEST_OVERRUN_LOOKBEHIND 1 +# endif +#endif + +#undef TEST_IP +#undef TEST_OP +#undef TEST_LB +#undef TEST_LBO +#undef NEED_IP +#undef NEED_OP +#undef HAVE_TEST_IP +#undef HAVE_TEST_OP +#undef HAVE_NEED_IP +#undef HAVE_NEED_OP +#undef HAVE_ANY_IP +#undef HAVE_ANY_OP + +#if defined(LZO_TEST_OVERRUN_INPUT) +# if (LZO_TEST_OVERRUN_INPUT >= 1) +# define TEST_IP (ip < ip_end) +# endif +# if (LZO_TEST_OVERRUN_INPUT >= 2) +# define NEED_IP(x) \ + if ((lzo_uint)(ip_end - ip) < (lzo_uint)(x)) goto input_overrun +# endif +#endif + +#if defined(LZO_TEST_OVERRUN_OUTPUT) +# if (LZO_TEST_OVERRUN_OUTPUT >= 1) +# define TEST_OP (op <= op_end) +# endif +# if (LZO_TEST_OVERRUN_OUTPUT >= 2) +# undef TEST_OP +# define NEED_OP(x) \ + if ((lzo_uint)(op_end - op) < (lzo_uint)(x)) goto output_overrun +# endif +#endif + +#if defined(LZO_TEST_OVERRUN_LOOKBEHIND) +# define TEST_LB(m_pos) if (m_pos < out || m_pos >= op) goto lookbehind_overrun +# define TEST_LBO(m_pos,o) if (m_pos < out || m_pos >= op - (o)) goto lookbehind_overrun +#else +# define TEST_LB(m_pos) ((void) 0) +# define TEST_LBO(m_pos,o) ((void) 0) +#endif + +#if !defined(LZO_EOF_CODE) && !defined(TEST_IP) +# define TEST_IP (ip < ip_end) +#endif + +#if defined(TEST_IP) +# define HAVE_TEST_IP 1 +#else +# define TEST_IP 1 +#endif +#if defined(TEST_OP) +# define HAVE_TEST_OP 1 +#else +# define TEST_OP 1 +#endif + +#if defined(NEED_IP) +# define HAVE_NEED_IP 1 +#else +# define NEED_IP(x) ((void) 0) +#endif +#if defined(NEED_OP) +# define HAVE_NEED_OP 1 +#else +# define NEED_OP(x) ((void) 0) +#endif + +#if defined(HAVE_TEST_IP) || defined(HAVE_NEED_IP) +# define HAVE_ANY_IP 1 +#endif +#if defined(HAVE_TEST_OP) || defined(HAVE_NEED_OP) +# define HAVE_ANY_OP 1 +#endif + +#if defined(DO_DECOMPRESS) +LZO_PUBLIC(int) +DO_DECOMPRESS ( const lzo_bytep in , lzo_uint in_len, + lzo_bytep out, lzo_uintp out_len, + lzo_voidp wrkmem ) +#endif +{ + register lzo_bytep op; + register const lzo_bytep ip; + register lzo_uint t; +#if defined(COPY_DICT) + lzo_uint m_off; + const lzo_bytep dict_end; +#else + register const lzo_bytep m_pos; +#endif + + const lzo_bytep const ip_end = in + in_len; +#if defined(HAVE_ANY_OP) + lzo_bytep const op_end = out + *out_len; +#endif +#if defined(LZO1Z) + lzo_uint last_m_off = 0; +#endif + + LZO_UNUSED(wrkmem); + +#if defined(COPY_DICT) + if (dict) + { + if (dict_len > M4_MAX_OFFSET) + { + dict += dict_len - M4_MAX_OFFSET; + dict_len = M4_MAX_OFFSET; + } + dict_end = dict + dict_len; + } + else + { + dict_len = 0; + dict_end = NULL; + } +#endif + + *out_len = 0; + + op = out; + ip = in; + + if (*ip > 17) + { + t = *ip++ - 17; + if (t < 4) + goto match_next; + assert(t > 0); NEED_OP(t); NEED_IP(t+1); + do *op++ = *ip++; while (--t > 0); + goto first_literal_run; + } + + while (TEST_IP && TEST_OP) + { + t = *ip++; + if (t >= 16) + goto match; + if (t == 0) + { + NEED_IP(1); + while (*ip == 0) + { + t += 255; + ip++; + NEED_IP(1); + } + t += 15 + *ip++; + } + assert(t > 0); NEED_OP(t+3); NEED_IP(t+4); +#if defined(LZO_UNALIGNED_OK_4) || defined(LZO_ALIGNED_OK_4) +#if !defined(LZO_UNALIGNED_OK_4) + if (PTR_ALIGNED2_4(op,ip)) + { +#endif + COPY4(op,ip); + op += 4; ip += 4; + if (--t > 0) + { + if (t >= 4) + { + do { + COPY4(op,ip); + op += 4; ip += 4; t -= 4; + } while (t >= 4); + if (t > 0) do *op++ = *ip++; while (--t > 0); + } + else + do *op++ = *ip++; while (--t > 0); + } +#if !defined(LZO_UNALIGNED_OK_4) + } + else +#endif +#endif +#if !defined(LZO_UNALIGNED_OK_4) + { + *op++ = *ip++; *op++ = *ip++; *op++ = *ip++; + do *op++ = *ip++; while (--t > 0); + } +#endif + +first_literal_run: + + t = *ip++; + if (t >= 16) + goto match; +#if defined(COPY_DICT) +#if defined(LZO1Z) + m_off = (1 + M2_MAX_OFFSET) + (t << 6) + (*ip++ >> 2); + last_m_off = m_off; +#else + m_off = (1 + M2_MAX_OFFSET) + (t >> 2) + (*ip++ << 2); +#endif + NEED_OP(3); + t = 3; COPY_DICT(t,m_off) +#else +#if defined(LZO1Z) + t = (1 + M2_MAX_OFFSET) + (t << 6) + (*ip++ >> 2); + m_pos = op - t; + last_m_off = t; +#else + m_pos = op - (1 + M2_MAX_OFFSET); + m_pos -= t >> 2; + m_pos -= *ip++ << 2; +#endif + TEST_LB(m_pos); NEED_OP(3); + *op++ = *m_pos++; *op++ = *m_pos++; *op++ = *m_pos; +#endif + goto match_done; + + do { +match: + if (t >= 64) + { +#if defined(COPY_DICT) +#if defined(LZO1X) + m_off = 1 + ((t >> 2) & 7) + (*ip++ << 3); + t = (t >> 5) - 1; +#elif defined(LZO1Y) + m_off = 1 + ((t >> 2) & 3) + (*ip++ << 2); + t = (t >> 4) - 3; +#elif defined(LZO1Z) + m_off = t & 0x1f; + if (m_off >= 0x1c) + m_off = last_m_off; + else + { + m_off = 1 + (m_off << 6) + (*ip++ >> 2); + last_m_off = m_off; + } + t = (t >> 5) - 1; +#endif +#else +#if defined(LZO1X) + m_pos = op - 1; + m_pos -= (t >> 2) & 7; + m_pos -= *ip++ << 3; + t = (t >> 5) - 1; +#elif defined(LZO1Y) + m_pos = op - 1; + m_pos -= (t >> 2) & 3; + m_pos -= *ip++ << 2; + t = (t >> 4) - 3; +#elif defined(LZO1Z) + { + lzo_uint off = t & 0x1f; + m_pos = op; + if (off >= 0x1c) + { + assert(last_m_off > 0); + m_pos -= last_m_off; + } + else + { + off = 1 + (off << 6) + (*ip++ >> 2); + m_pos -= off; + last_m_off = off; + } + } + t = (t >> 5) - 1; +#endif + TEST_LB(m_pos); assert(t > 0); NEED_OP(t+3-1); + goto copy_match; +#endif + } + else if (t >= 32) + { + t &= 31; + if (t == 0) + { + NEED_IP(1); + while (*ip == 0) + { + t += 255; + ip++; + NEED_IP(1); + } + t += 31 + *ip++; + } +#if defined(COPY_DICT) +#if defined(LZO1Z) + m_off = 1 + (ip[0] << 6) + (ip[1] >> 2); + last_m_off = m_off; +#else + m_off = 1 + (ip[0] >> 2) + (ip[1] << 6); +#endif +#else +#if defined(LZO1Z) + { + lzo_uint off = 1 + (ip[0] << 6) + (ip[1] >> 2); + m_pos = op - off; + last_m_off = off; + } +#elif defined(LZO_UNALIGNED_OK_2) && defined(LZO_ABI_LITTLE_ENDIAN) + m_pos = op - 1; + m_pos -= (* (const lzo_ushortp) (const lzo_voidp) ip) >> 2; +#else + m_pos = op - 1; + m_pos -= (ip[0] >> 2) + (ip[1] << 6); +#endif +#endif + ip += 2; + } + else if (t >= 16) + { +#if defined(COPY_DICT) + m_off = (t & 8) << 11; +#else + m_pos = op; + m_pos -= (t & 8) << 11; +#endif + t &= 7; + if (t == 0) + { + NEED_IP(1); + while (*ip == 0) + { + t += 255; + ip++; + NEED_IP(1); + } + t += 7 + *ip++; + } +#if defined(COPY_DICT) +#if defined(LZO1Z) + m_off += (ip[0] << 6) + (ip[1] >> 2); +#else + m_off += (ip[0] >> 2) + (ip[1] << 6); +#endif + ip += 2; + if (m_off == 0) + goto eof_found; + m_off += 0x4000; +#if defined(LZO1Z) + last_m_off = m_off; +#endif +#else +#if defined(LZO1Z) + m_pos -= (ip[0] << 6) + (ip[1] >> 2); +#elif defined(LZO_UNALIGNED_OK_2) && defined(LZO_ABI_LITTLE_ENDIAN) + m_pos -= (* (const lzo_ushortp) (const lzo_voidp) ip) >> 2; +#else + m_pos -= (ip[0] >> 2) + (ip[1] << 6); +#endif + ip += 2; + if (m_pos == op) + goto eof_found; + m_pos -= 0x4000; +#if defined(LZO1Z) + last_m_off = pd((const lzo_bytep)op, m_pos); +#endif +#endif + } + else + { +#if defined(COPY_DICT) +#if defined(LZO1Z) + m_off = 1 + (t << 6) + (*ip++ >> 2); + last_m_off = m_off; +#else + m_off = 1 + (t >> 2) + (*ip++ << 2); +#endif + NEED_OP(2); + t = 2; COPY_DICT(t,m_off) +#else +#if defined(LZO1Z) + t = 1 + (t << 6) + (*ip++ >> 2); + m_pos = op - t; + last_m_off = t; +#else + m_pos = op - 1; + m_pos -= t >> 2; + m_pos -= *ip++ << 2; +#endif + TEST_LB(m_pos); NEED_OP(2); + *op++ = *m_pos++; *op++ = *m_pos; +#endif + goto match_done; + } + +#if defined(COPY_DICT) + + NEED_OP(t+3-1); + t += 3-1; COPY_DICT(t,m_off) + +#else + + TEST_LB(m_pos); assert(t > 0); NEED_OP(t+3-1); +#if defined(LZO_UNALIGNED_OK_4) || defined(LZO_ALIGNED_OK_4) +#if !defined(LZO_UNALIGNED_OK_4) + if (t >= 2 * 4 - (3 - 1) && PTR_ALIGNED2_4(op,m_pos)) + { + assert((op - m_pos) >= 4); +#else + if (t >= 2 * 4 - (3 - 1) && (op - m_pos) >= 4) + { +#endif + COPY4(op,m_pos); + op += 4; m_pos += 4; t -= 4 - (3 - 1); + do { + COPY4(op,m_pos); + op += 4; m_pos += 4; t -= 4; + } while (t >= 4); + if (t > 0) do *op++ = *m_pos++; while (--t > 0); + } + else +#endif + { +copy_match: + *op++ = *m_pos++; *op++ = *m_pos++; + do *op++ = *m_pos++; while (--t > 0); + } + +#endif + +match_done: +#if defined(LZO1Z) + t = ip[-1] & 3; +#else + t = ip[-2] & 3; +#endif + if (t == 0) + break; + +match_next: + assert(t > 0); assert(t < 4); NEED_OP(t); NEED_IP(t+1); +#if 0 + do *op++ = *ip++; while (--t > 0); +#else + *op++ = *ip++; + if (t > 1) { *op++ = *ip++; if (t > 2) { *op++ = *ip++; } } +#endif + t = *ip++; + } while (TEST_IP && TEST_OP); + } + +#if defined(HAVE_TEST_IP) || defined(HAVE_TEST_OP) + *out_len = pd(op, out); + return LZO_E_EOF_NOT_FOUND; +#endif + +eof_found: + assert(t == 1); + *out_len = pd(op, out); + return (ip == ip_end ? LZO_E_OK : + (ip < ip_end ? LZO_E_INPUT_NOT_CONSUMED : LZO_E_INPUT_OVERRUN)); + +#if defined(HAVE_NEED_IP) +input_overrun: + *out_len = pd(op, out); + return LZO_E_INPUT_OVERRUN; +#endif + +#if defined(HAVE_NEED_OP) +output_overrun: + *out_len = pd(op, out); + return LZO_E_OUTPUT_OVERRUN; +#endif + +#if defined(LZO_TEST_OVERRUN_LOOKBEHIND) +lookbehind_overrun: + *out_len = pd(op, out); + return LZO_E_LOOKBEHIND_OVERRUN; +#endif +} + +#endif + +/***** End of minilzo.c *****/ + diff --git a/jni/vnc/LibVNCServer-0.9.9/common/minilzo.h b/jni/vnc/LibVNCServer-0.9.9/common/minilzo.h new file mode 100644 index 0000000..bd8ad65 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/minilzo.h @@ -0,0 +1,108 @@ +/* minilzo.h -- mini subset of the LZO real-time data compression library + + This file is part of the LZO real-time data compression library. + + Copyright (C) 2010 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2009 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2008 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2007 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2006 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2005 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2004 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2003 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2002 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2001 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 2000 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1999 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1998 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1997 Markus Franz Xaver Johannes Oberhumer + Copyright (C) 1996 Markus Franz Xaver Johannes Oberhumer + All Rights Reserved. + + The LZO library is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of + the License, or (at your option) any later version. + + The LZO library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with the LZO library; see the file COPYING. + If not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + Markus F.X.J. Oberhumer + + http://www.oberhumer.com/opensource/lzo/ + */ + +/* + * NOTE: + * the full LZO package can be found at + * http://www.oberhumer.com/opensource/lzo/ + */ + + +#ifndef __MINILZO_H +#define __MINILZO_H 1 + +#define MINILZO_VERSION 0x2040 + +#ifdef __LZOCONF_H +# error "you cannot use both LZO and miniLZO" +#endif + +#undef LZO_HAVE_CONFIG_H +#include "lzoconf.h" + +#if !defined(LZO_VERSION) || (LZO_VERSION != MINILZO_VERSION) +# error "version mismatch in header files" +#endif + + +#ifdef __cplusplus +extern "C" { +#endif + + +/*********************************************************************** +// +************************************************************************/ + +/* Memory required for the wrkmem parameter. + * When the required size is 0, you can also pass a NULL pointer. + */ + +#define LZO1X_MEM_COMPRESS LZO1X_1_MEM_COMPRESS +#define LZO1X_1_MEM_COMPRESS ((lzo_uint32) (16384L * lzo_sizeof_dict_t)) +#define LZO1X_MEM_DECOMPRESS (0) + + +/* compression */ +LZO_EXTERN(int) +lzo1x_1_compress ( const lzo_bytep src, lzo_uint src_len, + lzo_bytep dst, lzo_uintp dst_len, + lzo_voidp wrkmem ); + +/* decompression */ +LZO_EXTERN(int) +lzo1x_decompress ( const lzo_bytep src, lzo_uint src_len, + lzo_bytep dst, lzo_uintp dst_len, + lzo_voidp wrkmem /* NOT USED */ ); + +/* safe decompression with overrun testing */ +LZO_EXTERN(int) +lzo1x_decompress_safe ( const lzo_bytep src, lzo_uint src_len, + lzo_bytep dst, lzo_uintp dst_len, + lzo_voidp wrkmem /* NOT USED */ ); + + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /* already included */ + diff --git a/jni/vnc/LibVNCServer-0.9.9/common/sha1.c b/jni/vnc/LibVNCServer-0.9.9/common/sha1.c new file mode 100644 index 0000000..988b188 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/sha1.c @@ -0,0 +1,411 @@ +/* + * Copyright (C) The Internet Society (2001). All Rights Reserved. + * + * This document and translations of it may be copied and furnished to + * others, and derivative works that comment on or otherwise explain it + * or assist in its implementation may be prepared, copied, published + * and distributed, in whole or in part, without restriction of any + * kind, provided that the above copyright notice and this paragraph are + * included on all such copies and derivative works. However, this + * document itself may not be modified in any way, such as by removing + * the copyright notice or references to the Internet Society or other + * Internet organizations, except as needed for the purpose of + * developing Internet standards in which case the procedures for + * copyrights defined in the Internet Standards process must be + * followed, or as required to translate it into languages other than + * English. + * + * The limited permissions granted above are perpetual and will not be + * revoked by the Internet Society or its successors or assigns. + * + * This document and the information contained herein is provided on an + * "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING + * TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING + * BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION + * HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + */ + +/* + * sha1.c + * + * Description: + * This file implements the Secure Hashing Algorithm 1 as + * defined in FIPS PUB 180-1 published April 17, 1995. + * + * The SHA-1, produces a 160-bit message digest for a given + * data stream. It should take about 2**n steps to find a + * message with the same digest as a given message and + * 2**(n/2) to find any two messages with the same digest, + * when n is the digest size in bits. Therefore, this + * algorithm can serve as a means of providing a + * "fingerprint" for a message. + * + * Portability Issues: + * SHA-1 is defined in terms of 32-bit "words". This code + * uses (included via "sha1.h" to define 32 and 8 + * bit unsigned integer types. If your C compiler does not + * support 32 bit unsigned integers, this code is not + * appropriate. + * + * Caveats: + * SHA-1 is designed to work with messages less than 2^64 bits + * long. Although SHA-1 allows a message digest to be generated + * for messages of any number of bits less than 2^64, this + * implementation only works with messages with a length that is + * a multiple of the size of an 8-bit character. + * + */ + +#include "sha1.h" + +/* + * Define the SHA1 circular left shift macro + */ +#define SHA1CircularShift(bits,word) \ + (((word) << (bits)) | ((word) >> (32-(bits)))) + +/* Local Function Prototyptes */ +void SHA1PadMessage(SHA1Context *); +void SHA1ProcessMessageBlock(SHA1Context *); + +/* + * SHA1Reset + * + * Description: + * This function will initialize the SHA1Context in preparation + * for computing a new SHA1 message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * + * Returns: + * sha Error Code. + * + */ +int SHA1Reset(SHA1Context *context) +{ + if (!context) + { + return shaNull; + } + + context->Length_Low = 0; + context->Length_High = 0; + context->Message_Block_Index = 0; + + context->Intermediate_Hash[0] = 0x67452301; + context->Intermediate_Hash[1] = 0xEFCDAB89; + context->Intermediate_Hash[2] = 0x98BADCFE; + context->Intermediate_Hash[3] = 0x10325476; + context->Intermediate_Hash[4] = 0xC3D2E1F0; + + context->Computed = 0; + context->Corrupted = 0; + return shaSuccess; +} + +/* + * SHA1Result + * + * Description: + * This function will return the 160-bit message digest into the + * Message_Digest array provided by the caller. + * NOTE: The first octet of hash is stored in the 0th element, + * the last octet of hash in the 19th element. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA-1 hash. + * Message_Digest: [out] + * Where the digest is returned. + * + * Returns: + * sha Error Code. + * + */ +int SHA1Result( SHA1Context *context, + uint8_t Message_Digest[SHA1HashSize]) +{ + int i; + + if (!context || !Message_Digest) + { + return shaNull; + } + + if (context->Corrupted) + { + return context->Corrupted; + } + + if (!context->Computed) + { + SHA1PadMessage(context); + for(i=0; i<64; ++i) + { + /* message may be sensitive, clear it out */ + context->Message_Block[i] = 0; + } + context->Length_Low = 0; /* and clear length */ + context->Length_High = 0; + context->Computed = 1; + } + + for(i = 0; i < SHA1HashSize; ++i) + { + Message_Digest[i] = context->Intermediate_Hash[i>>2] + >> 8 * ( 3 - ( i & 0x03 ) ); + } + + return shaSuccess; +} + +/* + * SHA1Input + * + * Description: + * This function accepts an array of octets as the next portion + * of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update + * message_array: [in] + * An array of characters representing the next portion of + * the message. + * length: [in] + * The length of the message in message_array + * + * Returns: + * sha Error Code. + * + */ +int SHA1Input( SHA1Context *context, + const uint8_t *message_array, + unsigned length) +{ + if (!length) + { + return shaSuccess; + } + + if (!context || !message_array) + { + return shaNull; + } + + if (context->Computed) + { + context->Corrupted = shaStateError; + return shaStateError; + } + + if (context->Corrupted) + { + return context->Corrupted; + } + while(length-- && !context->Corrupted) + { + context->Message_Block[context->Message_Block_Index++] = + (*message_array & 0xFF); + + context->Length_Low += 8; + if (context->Length_Low == 0) + { + context->Length_High++; + if (context->Length_High == 0) + { + /* Message is too long */ + context->Corrupted = 1; + } + } + + if (context->Message_Block_Index == 64) + { + SHA1ProcessMessageBlock(context); + } + + message_array++; + } + + return shaSuccess; +} + +/* + * SHA1ProcessMessageBlock + * + * Description: + * This function will process the next 512 bits of the message + * stored in the Message_Block array. + * + * Parameters: + * None. + * + * Returns: + * Nothing. + * + * Comments: + * Many of the variable names in this code, especially the + * single character names, were used because those were the + * names used in the publication. + * + * + */ +void SHA1ProcessMessageBlock(SHA1Context *context) +{ + const uint32_t K[] = { /* Constants defined in SHA-1 */ + 0x5A827999, + 0x6ED9EBA1, + 0x8F1BBCDC, + 0xCA62C1D6 + }; + int t; /* Loop counter */ + uint32_t temp; /* Temporary word value */ + uint32_t W[80]; /* Word sequence */ + uint32_t A, B, C, D, E; /* Word buffers */ + + /* + * Initialize the first 16 words in the array W + */ + for(t = 0; t < 16; t++) + { + W[t] = context->Message_Block[t * 4] << 24; + W[t] |= context->Message_Block[t * 4 + 1] << 16; + W[t] |= context->Message_Block[t * 4 + 2] << 8; + W[t] |= context->Message_Block[t * 4 + 3]; + } + + for(t = 16; t < 80; t++) + { + W[t] = SHA1CircularShift(1,W[t-3] ^ W[t-8] ^ W[t-14] ^ W[t-16]); + } + + A = context->Intermediate_Hash[0]; + B = context->Intermediate_Hash[1]; + C = context->Intermediate_Hash[2]; + D = context->Intermediate_Hash[3]; + E = context->Intermediate_Hash[4]; + + for(t = 0; t < 20; t++) + { + temp = SHA1CircularShift(5,A) + + ((B & C) | ((~B) & D)) + E + W[t] + K[0]; + E = D; + D = C; + C = SHA1CircularShift(30,B); + B = A; + A = temp; + } + + for(t = 20; t < 40; t++) + { + temp = SHA1CircularShift(5,A) + (B ^ C ^ D) + E + W[t] + K[1]; + E = D; + D = C; + C = SHA1CircularShift(30,B); + B = A; + A = temp; + } + + for(t = 40; t < 60; t++) + { + temp = SHA1CircularShift(5,A) + + ((B & C) | (B & D) | (C & D)) + E + W[t] + K[2]; + E = D; + D = C; + C = SHA1CircularShift(30,B); + B = A; + A = temp; + } + + for(t = 60; t < 80; t++) + { + temp = SHA1CircularShift(5,A) + (B ^ C ^ D) + E + W[t] + K[3]; + E = D; + D = C; + C = SHA1CircularShift(30,B); + B = A; + A = temp; + } + + context->Intermediate_Hash[0] += A; + context->Intermediate_Hash[1] += B; + context->Intermediate_Hash[2] += C; + context->Intermediate_Hash[3] += D; + context->Intermediate_Hash[4] += E; + + context->Message_Block_Index = 0; +} + + +/* + * SHA1PadMessage + * + * Description: + * According to the standard, the message must be padded to an even + * 512 bits. The first padding bit must be a '1'. The last 64 + * bits represent the length of the original message. All bits in + * between should be 0. This function will pad the message + * according to those rules by filling the Message_Block array + * accordingly. It will also call the ProcessMessageBlock function + * provided appropriately. When it returns, it can be assumed that + * the message digest has been computed. + * + * Parameters: + * context: [in/out] + * The context to pad + * ProcessMessageBlock: [in] + * The appropriate SHA*ProcessMessageBlock function + * Returns: + * Nothing. + * + */ + +void SHA1PadMessage(SHA1Context *context) +{ + /* + * Check to see if the current message block is too small to hold + * the initial padding bits and length. If so, we will pad the + * block, process it, and then continue padding into a second + * block. + */ + if (context->Message_Block_Index > 55) + { + context->Message_Block[context->Message_Block_Index++] = 0x80; + while(context->Message_Block_Index < 64) + { + context->Message_Block[context->Message_Block_Index++] = 0; + } + + SHA1ProcessMessageBlock(context); + + while(context->Message_Block_Index < 56) + { + context->Message_Block[context->Message_Block_Index++] = 0; + } + } + else + { + context->Message_Block[context->Message_Block_Index++] = 0x80; + while(context->Message_Block_Index < 56) + { + context->Message_Block[context->Message_Block_Index++] = 0; + } + } + + /* + * Store the message length as the last 8 octets + */ + context->Message_Block[56] = context->Length_High >> 24; + context->Message_Block[57] = context->Length_High >> 16; + context->Message_Block[58] = context->Length_High >> 8; + context->Message_Block[59] = context->Length_High; + context->Message_Block[60] = context->Length_Low >> 24; + context->Message_Block[61] = context->Length_Low >> 16; + context->Message_Block[62] = context->Length_Low >> 8; + context->Message_Block[63] = context->Length_Low; + + SHA1ProcessMessageBlock(context); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/common/sha1.h b/jni/vnc/LibVNCServer-0.9.9/common/sha1.h new file mode 100644 index 0000000..1d49b1b --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/sha1.h @@ -0,0 +1,101 @@ +/* + * Copyright (C) The Internet Society (2001). All Rights Reserved. + * + * This document and translations of it may be copied and furnished to + * others, and derivative works that comment on or otherwise explain it + * or assist in its implementation may be prepared, copied, published + * and distributed, in whole or in part, without restriction of any + * kind, provided that the above copyright notice and this paragraph are + * included on all such copies and derivative works. However, this + * document itself may not be modified in any way, such as by removing + * the copyright notice or references to the Internet Society or other + * Internet organizations, except as needed for the purpose of + * developing Internet standards in which case the procedures for + * copyrights defined in the Internet Standards process must be + * followed, or as required to translate it into languages other than + * English. + * + * The limited permissions granted above are perpetual and will not be + * revoked by the Internet Society or its successors or assigns. + * + * This document and the information contained herein is provided on an + * "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING + * TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING + * BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION + * HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + */ + +/* + * sha1.h + * + * Description: + * This is the header file for code which implements the Secure + * Hashing Algorithm 1 as defined in FIPS PUB 180-1 published + * April 17, 1995. + * + * Many of the variable names in this code, especially the + * single character names, were used because those were the names + * used in the publication. + * + * Please read the file sha1.c for more information. + * + */ + + +#ifndef _SHA1_H_ +#define _SHA1_H_ + +#include +/* + * If you do not have the ISO standard stdint.h header file, then you + * must typdef the following: + * name meaning + * uint32_t unsigned 32 bit integer + * uint8_t unsigned 8 bit integer (i.e., unsigned char) + * int_least16_t integer of >= 16 bits + * + */ + +#ifndef _SHA_enum_ +#define _SHA_enum_ +enum +{ + shaSuccess = 0, + shaNull, /* Null pointer parameter */ + shaInputTooLong, /* input data too long */ + shaStateError /* called Input after Result */ +}; +#endif +#define SHA1HashSize 20 + +/* + * This structure will hold context information for the SHA-1 + * hashing operation + */ +typedef struct SHA1Context +{ + uint32_t Intermediate_Hash[SHA1HashSize/4]; /* Message Digest */ + + uint32_t Length_Low; /* Message length in bits */ + uint32_t Length_High; /* Message length in bits */ + + /* Index into message block array */ + int_least16_t Message_Block_Index; + uint8_t Message_Block[64]; /* 512-bit message blocks */ + + int Computed; /* Is the digest computed? */ + int Corrupted; /* Is the message digest corrupted? */ +} SHA1Context; + +/* + * Function Prototypes + */ +int SHA1Reset( SHA1Context *); +int SHA1Input( SHA1Context *, + const uint8_t *, + unsigned int); +int SHA1Result( SHA1Context *, + uint8_t Message_Digest[SHA1HashSize]); + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/common/turbojpeg.c b/jni/vnc/LibVNCServer-0.9.9/common/turbojpeg.c new file mode 100644 index 0000000..f7b9245 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/turbojpeg.c @@ -0,0 +1,850 @@ +/* + * Copyright (C)2009-2012 D. R. Commander. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * - Neither the name of the libjpeg-turbo Project nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS", + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +/* TurboJPEG/OSS: this implements the TurboJPEG API using libjpeg-turbo */ + +#include +#include +#include +#ifndef JCS_EXTENSIONS +#define JPEG_INTERNAL_OPTIONS +#endif +#include +#include +#include +#include "./turbojpeg.h" + +#define PAD(v, p) ((v+(p)-1)&(~((p)-1))) + +#define CSTATE_START 100 +#define DSTATE_START 200 +#define MEMZERO(ptr, size) memset(ptr, 0, size) + +#ifndef min + #define min(a,b) ((a)<(b)?(a):(b)) +#endif + +#ifndef max + #define max(a,b) ((a)>(b)?(a):(b)) +#endif + + +/* Error handling (based on example in example.c) */ + +static char errStr[JMSG_LENGTH_MAX]="No error"; + +struct my_error_mgr +{ + struct jpeg_error_mgr pub; + jmp_buf setjmp_buffer; +}; +typedef struct my_error_mgr *my_error_ptr; + +static void my_error_exit(j_common_ptr cinfo) +{ + my_error_ptr myerr=(my_error_ptr)cinfo->err; + (*cinfo->err->output_message)(cinfo); + longjmp(myerr->setjmp_buffer, 1); +} + +/* Based on output_message() in jerror.c */ + +static void my_output_message(j_common_ptr cinfo) +{ + (*cinfo->err->format_message)(cinfo, errStr); +} + + +/* Global structures, macros, etc. */ + +enum {COMPRESS=1, DECOMPRESS=2}; + +typedef struct _tjinstance +{ + struct jpeg_compress_struct cinfo; + struct jpeg_decompress_struct dinfo; + struct jpeg_destination_mgr jdst; + struct jpeg_source_mgr jsrc; + struct my_error_mgr jerr; + int init; +} tjinstance; + +static const int pixelsize[TJ_NUMSAMP]={3, 3, 3, 1, 3}; + +#define NUMSF 4 +static const tjscalingfactor sf[NUMSF]={ + {1, 1}, + {1, 2}, + {1, 4}, + {1, 8} +}; + +#define _throw(m) {snprintf(errStr, JMSG_LENGTH_MAX, "%s", m); \ + retval=-1; goto bailout;} +#define getinstance(handle) tjinstance *this=(tjinstance *)handle; \ + j_compress_ptr cinfo=NULL; j_decompress_ptr dinfo=NULL; \ + (void) cinfo; (void) dinfo; /* silence warnings */ \ + if(!this) {snprintf(errStr, JMSG_LENGTH_MAX, "Invalid handle"); \ + return -1;} \ + cinfo=&this->cinfo; dinfo=&this->dinfo; + +static int getPixelFormat(int pixelSize, int flags) +{ + if(pixelSize==1) return TJPF_GRAY; + if(pixelSize==3) + { + if(flags&TJ_BGR) return TJPF_BGR; + else return TJPF_RGB; + } + if(pixelSize==4) + { + if(flags&TJ_ALPHAFIRST) + { + if(flags&TJ_BGR) return TJPF_XBGR; + else return TJPF_XRGB; + } + else + { + if(flags&TJ_BGR) return TJPF_BGRX; + else return TJPF_RGBX; + } + } + return -1; +} + +static int setCompDefaults(struct jpeg_compress_struct *cinfo, + int pixelFormat, int subsamp, int jpegQual) +{ + int retval=0; + + switch(pixelFormat) + { + case TJPF_GRAY: + cinfo->in_color_space=JCS_GRAYSCALE; break; + #if JCS_EXTENSIONS==1 + case TJPF_RGB: + cinfo->in_color_space=JCS_EXT_RGB; break; + case TJPF_BGR: + cinfo->in_color_space=JCS_EXT_BGR; break; + case TJPF_RGBX: + case TJPF_RGBA: + cinfo->in_color_space=JCS_EXT_RGBX; break; + case TJPF_BGRX: + case TJPF_BGRA: + cinfo->in_color_space=JCS_EXT_BGRX; break; + case TJPF_XRGB: + case TJPF_ARGB: + cinfo->in_color_space=JCS_EXT_XRGB; break; + case TJPF_XBGR: + case TJPF_ABGR: + cinfo->in_color_space=JCS_EXT_XBGR; break; + #else + case TJPF_RGB: + case TJPF_BGR: + case TJPF_RGBX: + case TJPF_BGRX: + case TJPF_XRGB: + case TJPF_XBGR: + case TJPF_RGBA: + case TJPF_BGRA: + case TJPF_ARGB: + case TJPF_ABGR: + cinfo->in_color_space=JCS_RGB; pixelFormat=TJPF_RGB; + break; + #endif + } + + cinfo->input_components=tjPixelSize[pixelFormat]; + jpeg_set_defaults(cinfo); + if(jpegQual>=0) + { + jpeg_set_quality(cinfo, jpegQual, TRUE); + if(jpegQual>=96) cinfo->dct_method=JDCT_ISLOW; + else cinfo->dct_method=JDCT_FASTEST; + } + if(subsamp==TJSAMP_GRAY) + jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); + else + jpeg_set_colorspace(cinfo, JCS_YCbCr); + + cinfo->comp_info[0].h_samp_factor=tjMCUWidth[subsamp]/8; + cinfo->comp_info[1].h_samp_factor=1; + cinfo->comp_info[2].h_samp_factor=1; + cinfo->comp_info[0].v_samp_factor=tjMCUHeight[subsamp]/8; + cinfo->comp_info[1].v_samp_factor=1; + cinfo->comp_info[2].v_samp_factor=1; + + return retval; +} + +static int setDecompDefaults(struct jpeg_decompress_struct *dinfo, + int pixelFormat) +{ + int retval=0; + + switch(pixelFormat) + { + case TJPF_GRAY: + dinfo->out_color_space=JCS_GRAYSCALE; break; + #if JCS_EXTENSIONS==1 + case TJPF_RGB: + dinfo->out_color_space=JCS_EXT_RGB; break; + case TJPF_BGR: + dinfo->out_color_space=JCS_EXT_BGR; break; + case TJPF_RGBX: + dinfo->out_color_space=JCS_EXT_RGBX; break; + case TJPF_BGRX: + dinfo->out_color_space=JCS_EXT_BGRX; break; + case TJPF_XRGB: + dinfo->out_color_space=JCS_EXT_XRGB; break; + case TJPF_XBGR: + dinfo->out_color_space=JCS_EXT_XBGR; break; + #if JCS_ALPHA_EXTENSIONS==1 + case TJPF_RGBA: + dinfo->out_color_space=JCS_EXT_RGBA; break; + case TJPF_BGRA: + dinfo->out_color_space=JCS_EXT_BGRA; break; + case TJPF_ARGB: + dinfo->out_color_space=JCS_EXT_ARGB; break; + case TJPF_ABGR: + dinfo->out_color_space=JCS_EXT_ABGR; break; + #endif + #else + case TJPF_RGB: + case TJPF_BGR: + case TJPF_RGBX: + case TJPF_BGRX: + case TJPF_XRGB: + case TJPF_XBGR: + case TJPF_RGBA: + case TJPF_BGRA: + case TJPF_ARGB: + case TJPF_ABGR: + dinfo->out_color_space=JCS_RGB; break; + #endif + default: + _throw("Unsupported pixel format"); + } + + bailout: + return retval; +} + + +static int getSubsamp(j_decompress_ptr dinfo) +{ + int retval=-1, i, k; + for(i=0; inum_components==pixelsize[i]) + { + if(dinfo->comp_info[0].h_samp_factor==tjMCUWidth[i]/8 + && dinfo->comp_info[0].v_samp_factor==tjMCUHeight[i]/8) + { + int match=0; + for(k=1; knum_components; k++) + { + if(dinfo->comp_info[k].h_samp_factor==1 + && dinfo->comp_info[k].v_samp_factor==1) + match++; + } + if(match==dinfo->num_components-1) + { + retval=i; break; + } + } + } + } + return retval; +} + + +#ifndef JCS_EXTENSIONS + +/* Conversion functions to emulate the colorspace extensions. This allows the + TurboJPEG wrapper to be used with libjpeg */ + +#define TORGB(PS, ROFFSET, GOFFSET, BOFFSET) { \ + int rowPad=pitch-width*PS; \ + while(height--) \ + { \ + unsigned char *endOfRow=src+width*PS; \ + while(srcjerr.setjmp_buffer)) return -1; + if(this->init&COMPRESS) jpeg_destroy_compress(cinfo); + if(this->init&DECOMPRESS) jpeg_destroy_decompress(dinfo); + free(this); + return 0; +} + + +/* Compressor */ + +static boolean empty_output_buffer(j_compress_ptr cinfo) +{ + ERREXIT(cinfo, JERR_BUFFER_SIZE); + return TRUE; +} + +static void dst_noop(j_compress_ptr cinfo) +{ +} + +static tjhandle _tjInitCompress(tjinstance *this) +{ + /* This is also straight out of example.c */ + this->cinfo.err=jpeg_std_error(&this->jerr.pub); + this->jerr.pub.error_exit=my_error_exit; + this->jerr.pub.output_message=my_output_message; + + if(setjmp(this->jerr.setjmp_buffer)) + { + /* If we get here, the JPEG code has signaled an error. */ + if(this) free(this); return NULL; + } + + jpeg_create_compress(&this->cinfo); + this->cinfo.dest=&this->jdst; + this->jdst.init_destination=dst_noop; + this->jdst.empty_output_buffer=empty_output_buffer; + this->jdst.term_destination=dst_noop; + + this->init|=COMPRESS; + return (tjhandle)this; +} + +DLLEXPORT tjhandle DLLCALL tjInitCompress(void) +{ + tjinstance *this=NULL; + if((this=(tjinstance *)malloc(sizeof(tjinstance)))==NULL) + { + snprintf(errStr, JMSG_LENGTH_MAX, + "tjInitCompress(): Memory allocation failure"); + return NULL; + } + MEMZERO(this, sizeof(tjinstance)); + return _tjInitCompress(this); +} + + +DLLEXPORT unsigned long DLLCALL tjBufSize(int width, int height, + int jpegSubsamp) +{ + unsigned long retval=0; int mcuw, mcuh, chromasf; + if(width<1 || height<1 || jpegSubsamp<0 || jpegSubsamp>=NUMSUBOPT) + _throw("tjBufSize(): Invalid argument"); + + // This allows for rare corner cases in which a JPEG image can actually be + // larger than the uncompressed input (we wouldn't mention it if it hadn't + // happened before.) + mcuw=tjMCUWidth[jpegSubsamp]; + mcuh=tjMCUHeight[jpegSubsamp]; + chromasf=jpegSubsamp==TJSAMP_GRAY? 0: 4*64/(mcuw*mcuh); + retval=PAD(width, mcuw) * PAD(height, mcuh) * (2 + chromasf) + 2048; + + bailout: + return retval; +} + + +DLLEXPORT unsigned long DLLCALL TJBUFSIZE(int width, int height) +{ + unsigned long retval=0; + if(width<1 || height<1) + _throw("TJBUFSIZE(): Invalid argument"); + + // This allows for rare corner cases in which a JPEG image can actually be + // larger than the uncompressed input (we wouldn't mention it if it hadn't + // happened before.) + retval=PAD(width, 16) * PAD(height, 16) * 6 + 2048; + + bailout: + return retval; +} + + +DLLEXPORT int DLLCALL tjCompress2(tjhandle handle, unsigned char *srcBuf, + int width, int pitch, int height, int pixelFormat, unsigned char **jpegBuf, + unsigned long *jpegSize, int jpegSubsamp, int jpegQual, int flags) +{ + int i, retval=0; JSAMPROW *row_pointer=NULL; + #ifndef JCS_EXTENSIONS + unsigned char *rgbBuf=NULL; + #endif + + getinstance(handle) + if((this->init&COMPRESS)==0) + _throw("tjCompress2(): Instance has not been initialized for compression"); + + if(srcBuf==NULL || width<=0 || pitch<0 || height<=0 || pixelFormat<0 + || pixelFormat>=TJ_NUMPF || jpegBuf==NULL || jpegSize==NULL + || jpegSubsamp<0 || jpegSubsamp>=NUMSUBOPT || jpegQual<0 || jpegQual>100) + _throw("tjCompress2(): Invalid argument"); + + if(setjmp(this->jerr.setjmp_buffer)) + { + /* If we get here, the JPEG code has signaled an error. */ + retval=-1; + goto bailout; + } + + if(pitch==0) pitch=width*tjPixelSize[pixelFormat]; + + #ifndef JCS_EXTENSIONS + if(pixelFormat!=TJPF_GRAY) + { + rgbBuf=(unsigned char *)malloc(width*height*RGB_PIXELSIZE); + if(!rgbBuf) _throw("tjCompress2(): Memory allocation failure"); + srcBuf=toRGB(srcBuf, width, pitch, height, pixelFormat, rgbBuf); + pitch=width*RGB_PIXELSIZE; + } + #endif + + cinfo->image_width=width; + cinfo->image_height=height; + + if(flags&TJFLAG_FORCEMMX) putenv("JSIMD_FORCEMMX=1"); + else if(flags&TJFLAG_FORCESSE) putenv("JSIMD_FORCESSE=1"); + else if(flags&TJFLAG_FORCESSE2) putenv("JSIMD_FORCESSE2=1"); + + if(setCompDefaults(cinfo, pixelFormat, jpegSubsamp, jpegQual)==-1) + return -1; + + this->jdst.next_output_byte=*jpegBuf; + this->jdst.free_in_buffer=tjBufSize(width, height, jpegSubsamp); + + jpeg_start_compress(cinfo, TRUE); + if((row_pointer=(JSAMPROW *)malloc(sizeof(JSAMPROW)*height))==NULL) + _throw("tjCompress2(): Memory allocation failure"); + for(i=0; inext_scanlineimage_height) + { + jpeg_write_scanlines(cinfo, &row_pointer[cinfo->next_scanline], + cinfo->image_height-cinfo->next_scanline); + } + jpeg_finish_compress(cinfo); + *jpegSize=tjBufSize(width, height, jpegSubsamp) + -(unsigned long)(this->jdst.free_in_buffer); + + bailout: + if(cinfo->global_state>CSTATE_START) jpeg_abort_compress(cinfo); + #ifndef JCS_EXTENSIONS + if(rgbBuf) free(rgbBuf); + #endif + if(row_pointer) free(row_pointer); + return retval; +} + +DLLEXPORT int DLLCALL tjCompress(tjhandle handle, unsigned char *srcBuf, + int width, int pitch, int height, int pixelSize, unsigned char *jpegBuf, + unsigned long *jpegSize, int jpegSubsamp, int jpegQual, int flags) +{ + int retval=0; unsigned long size; + retval=tjCompress2(handle, srcBuf, width, pitch, height, + getPixelFormat(pixelSize, flags), &jpegBuf, &size, jpegSubsamp, jpegQual, + flags); + *jpegSize=size; + return retval; +} + + +/* Decompressor */ + +static boolean fill_input_buffer(j_decompress_ptr dinfo) +{ + ERREXIT(dinfo, JERR_BUFFER_SIZE); + return TRUE; +} + +static void skip_input_data(j_decompress_ptr dinfo, long num_bytes) +{ + dinfo->src->next_input_byte += (size_t) num_bytes; + dinfo->src->bytes_in_buffer -= (size_t) num_bytes; +} + +static void src_noop(j_decompress_ptr dinfo) +{ +} + +static tjhandle _tjInitDecompress(tjinstance *this) +{ + /* This is also straight out of example.c */ + this->dinfo.err=jpeg_std_error(&this->jerr.pub); + this->jerr.pub.error_exit=my_error_exit; + this->jerr.pub.output_message=my_output_message; + + if(setjmp(this->jerr.setjmp_buffer)) + { + /* If we get here, the JPEG code has signaled an error. */ + if(this) free(this); return NULL; + } + + jpeg_create_decompress(&this->dinfo); + this->dinfo.src=&this->jsrc; + this->jsrc.init_source=src_noop; + this->jsrc.fill_input_buffer=fill_input_buffer; + this->jsrc.skip_input_data=skip_input_data; + this->jsrc.resync_to_restart=jpeg_resync_to_restart; + this->jsrc.term_source=src_noop; + + this->init|=DECOMPRESS; + return (tjhandle)this; +} + +DLLEXPORT tjhandle DLLCALL tjInitDecompress(void) +{ + tjinstance *this; + if((this=(tjinstance *)malloc(sizeof(tjinstance)))==NULL) + { + snprintf(errStr, JMSG_LENGTH_MAX, + "tjInitDecompress(): Memory allocation failure"); + return NULL; + } + MEMZERO(this, sizeof(tjinstance)); + return _tjInitDecompress(this); +} + + +DLLEXPORT int DLLCALL tjDecompressHeader2(tjhandle handle, + unsigned char *jpegBuf, unsigned long jpegSize, int *width, int *height, + int *jpegSubsamp) +{ + int retval=0; + + getinstance(handle); + if((this->init&DECOMPRESS)==0) + _throw("tjDecompressHeader2(): Instance has not been initialized for decompression"); + + if(jpegBuf==NULL || jpegSize<=0 || width==NULL || height==NULL + || jpegSubsamp==NULL) + _throw("tjDecompressHeader2(): Invalid argument"); + + if(setjmp(this->jerr.setjmp_buffer)) + { + /* If we get here, the JPEG code has signaled an error. */ + return -1; + } + + this->jsrc.bytes_in_buffer=jpegSize; + this->jsrc.next_input_byte=jpegBuf; + jpeg_read_header(dinfo, TRUE); + + *width=dinfo->image_width; + *height=dinfo->image_height; + *jpegSubsamp=getSubsamp(dinfo); + + jpeg_abort_decompress(dinfo); + + if(*jpegSubsamp<0) + _throw("tjDecompressHeader2(): Could not determine subsampling type for JPEG image"); + if(*width<1 || *height<1) + _throw("tjDecompressHeader2(): Invalid data returned in header"); + + bailout: + return retval; +} + +DLLEXPORT int DLLCALL tjDecompressHeader(tjhandle handle, + unsigned char *jpegBuf, unsigned long jpegSize, int *width, int *height) +{ + int jpegSubsamp; + return tjDecompressHeader2(handle, jpegBuf, jpegSize, width, height, + &jpegSubsamp); +} + + +DLLEXPORT tjscalingfactor* DLLCALL tjGetScalingFactors(int *numscalingfactors) +{ + if(numscalingfactors==NULL) + { + snprintf(errStr, JMSG_LENGTH_MAX, + "tjGetScalingFactors(): Invalid argument"); + return NULL; + } + + *numscalingfactors=NUMSF; + return (tjscalingfactor *)sf; +} + + +DLLEXPORT int DLLCALL tjDecompress2(tjhandle handle, unsigned char *jpegBuf, + unsigned long jpegSize, unsigned char *dstBuf, int width, int pitch, + int height, int pixelFormat, int flags) +{ + int i, retval=0; JSAMPROW *row_pointer=NULL; + int jpegwidth, jpegheight, scaledw, scaledh; + #ifndef JCS_EXTENSIONS + unsigned char *rgbBuf=NULL; + unsigned char *_dstBuf=NULL; int _pitch=0; + #endif + + getinstance(handle); + if((this->init&DECOMPRESS)==0) + _throw("tjDecompress2(): Instance has not been initialized for decompression"); + + if(jpegBuf==NULL || jpegSize<=0 || dstBuf==NULL || width<0 || pitch<0 + || height<0 || pixelFormat<0 || pixelFormat>=TJ_NUMPF) + _throw("tjDecompress2(): Invalid argument"); + + if(flags&TJFLAG_FORCEMMX) putenv("JSIMD_FORCEMMX=1"); + else if(flags&TJFLAG_FORCESSE) putenv("JSIMD_FORCESSE=1"); + else if(flags&TJFLAG_FORCESSE2) putenv("JSIMD_FORCESSE2=1"); + + if(setjmp(this->jerr.setjmp_buffer)) + { + /* If we get here, the JPEG code has signaled an error. */ + retval=-1; + goto bailout; + } + + this->jsrc.bytes_in_buffer=jpegSize; + this->jsrc.next_input_byte=jpegBuf; + jpeg_read_header(dinfo, TRUE); + if(setDecompDefaults(dinfo, pixelFormat)==-1) + { + retval=-1; goto bailout; + } + + if(flags&TJFLAG_FASTUPSAMPLE) dinfo->do_fancy_upsampling=FALSE; + + jpegwidth=dinfo->image_width; jpegheight=dinfo->image_height; + if(width==0) width=jpegwidth; + if(height==0) height=jpegheight; + for(i=0; iwidth || scaledh>height) + _throw("tjDecompress2(): Could not scale down to desired image dimensions"); + width=scaledw; height=scaledh; + dinfo->scale_num=sf[i].num; + dinfo->scale_denom=sf[i].denom; + + jpeg_start_decompress(dinfo); + if(pitch==0) pitch=dinfo->output_width*tjPixelSize[pixelFormat]; + + #ifndef JCS_EXTENSIONS + if(pixelFormat!=TJPF_GRAY && + (RGB_RED!=tjRedOffset[pixelFormat] || + RGB_GREEN!=tjGreenOffset[pixelFormat] || + RGB_BLUE!=tjBlueOffset[pixelFormat] || + RGB_PIXELSIZE!=tjPixelSize[pixelFormat])) + { + rgbBuf=(unsigned char *)malloc(width*height*3); + if(!rgbBuf) _throw("tjDecompress2(): Memory allocation failure"); + _pitch=pitch; pitch=width*3; + _dstBuf=dstBuf; dstBuf=rgbBuf; + } + #endif + + if((row_pointer=(JSAMPROW *)malloc(sizeof(JSAMPROW) + *dinfo->output_height))==NULL) + _throw("tjDecompress2(): Memory allocation failure"); + for(i=0; i<(int)dinfo->output_height; i++) + { + if(flags&TJFLAG_BOTTOMUP) + row_pointer[i]=&dstBuf[(dinfo->output_height-i-1)*pitch]; + else row_pointer[i]=&dstBuf[i*pitch]; + } + while(dinfo->output_scanlineoutput_height) + { + jpeg_read_scanlines(dinfo, &row_pointer[dinfo->output_scanline], + dinfo->output_height-dinfo->output_scanline); + } + jpeg_finish_decompress(dinfo); + + #ifndef JCS_EXTENSIONS + fromRGB(rgbBuf, _dstBuf, width, _pitch, height, pixelFormat); + #endif + + bailout: + if(dinfo->global_state>DSTATE_START) jpeg_abort_decompress(dinfo); + #ifndef JCS_EXTENSIONS + if(rgbBuf) free(rgbBuf); + #endif + if(row_pointer) free(row_pointer); + return retval; +} + +DLLEXPORT int DLLCALL tjDecompress(tjhandle handle, unsigned char *jpegBuf, + unsigned long jpegSize, unsigned char *dstBuf, int width, int pitch, + int height, int pixelSize, int flags) +{ + return tjDecompress2(handle, jpegBuf, jpegSize, dstBuf, width, pitch, + height, getPixelFormat(pixelSize, flags), flags); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/common/turbojpeg.h b/jni/vnc/LibVNCServer-0.9.9/common/turbojpeg.h new file mode 100644 index 0000000..ab8adda --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/turbojpeg.h @@ -0,0 +1,529 @@ +/* + * Copyright (C)2009-2012 D. R. Commander. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * - Neither the name of the libjpeg-turbo Project nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS", + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __TURBOJPEG_H__ +#define __TURBOJPEG_H__ + +#if defined(_WIN32) && defined(DLLDEFINE) +#define DLLEXPORT __declspec(dllexport) +#else +#define DLLEXPORT +#endif +#define DLLCALL + + +/** + * @addtogroup TurboJPEG Lite + * TurboJPEG API. This API provides an interface for generating and decoding + * JPEG images in memory. + * + * @{ + */ + + +/** + * The number of chrominance subsampling options + */ +#define TJ_NUMSAMP 5 + +/** + * Chrominance subsampling options. + * When an image is converted from the RGB to the YCbCr colorspace as part of + * the JPEG compression process, some of the Cb and Cr (chrominance) components + * can be discarded or averaged together to produce a smaller image with little + * perceptible loss of image clarity (the human eye is more sensitive to small + * changes in brightness than small changes in color.) This is called + * "chrominance subsampling". + */ +enum TJSAMP +{ + /** + * 4:4:4 chrominance subsampling (no chrominance subsampling). The JPEG or + * YUV image will contain one chrominance component for every pixel in the + * source image. + */ + TJSAMP_444=0, + /** + * 4:2:2 chrominance subsampling. The JPEG or YUV image will contain one + * chrominance component for every 2x1 block of pixels in the source image. + */ + TJSAMP_422, + /** + * 4:2:0 chrominance subsampling. The JPEG or YUV image will contain one + * chrominance component for every 2x2 block of pixels in the source image. + */ + TJSAMP_420, + /** + * Grayscale. The JPEG or YUV image will contain no chrominance components. + */ + TJSAMP_GRAY, + /** + * 4:4:0 chrominance subsampling. The JPEG or YUV image will contain one + * chrominance component for every 1x2 block of pixels in the source image. + */ + TJSAMP_440 +}; + +/** + * MCU block width (in pixels) for a given level of chrominance subsampling. + * MCU block sizes: + * - 8x8 for no subsampling or grayscale + * - 16x8 for 4:2:2 + * - 8x16 for 4:4:0 + * - 16x16 for 4:2:0 + */ +static const int tjMCUWidth[TJ_NUMSAMP] = {8, 16, 16, 8, 8}; + +/** + * MCU block height (in pixels) for a given level of chrominance subsampling. + * MCU block sizes: + * - 8x8 for no subsampling or grayscale + * - 16x8 for 4:2:2 + * - 8x16 for 4:4:0 + * - 16x16 for 4:2:0 + */ +static const int tjMCUHeight[TJ_NUMSAMP] = {8, 8, 16, 8, 16}; + + +/** + * The number of pixel formats + */ +#define TJ_NUMPF 11 + +/** + * Pixel formats + */ +enum TJPF +{ + /** + * RGB pixel format. The red, green, and blue components in the image are + * stored in 3-byte pixels in the order R, G, B from lowest to highest byte + * address within each pixel. + */ + TJPF_RGB=0, + /** + * BGR pixel format. The red, green, and blue components in the image are + * stored in 3-byte pixels in the order B, G, R from lowest to highest byte + * address within each pixel. + */ + TJPF_BGR, + /** + * RGBX pixel format. The red, green, and blue components in the image are + * stored in 4-byte pixels in the order R, G, B from lowest to highest byte + * address within each pixel. The X component is ignored when compressing + * and undefined when decompressing. + */ + TJPF_RGBX, + /** + * BGRX pixel format. The red, green, and blue components in the image are + * stored in 4-byte pixels in the order B, G, R from lowest to highest byte + * address within each pixel. The X component is ignored when compressing + * and undefined when decompressing. + */ + TJPF_BGRX, + /** + * XBGR pixel format. The red, green, and blue components in the image are + * stored in 4-byte pixels in the order R, G, B from highest to lowest byte + * address within each pixel. The X component is ignored when compressing + * and undefined when decompressing. + */ + TJPF_XBGR, + /** + * XRGB pixel format. The red, green, and blue components in the image are + * stored in 4-byte pixels in the order B, G, R from highest to lowest byte + * address within each pixel. The X component is ignored when compressing + * and undefined when decompressing. + */ + TJPF_XRGB, + /** + * Grayscale pixel format. Each 1-byte pixel represents a luminance + * (brightness) level from 0 to 255. + */ + TJPF_GRAY, + /** + * RGBA pixel format. This is the same as @ref TJPF_RGBX, except that when + * decompressing, the X component is guaranteed to be 0xFF, which can be + * interpreted as an opaque alpha channel. + */ + TJPF_RGBA, + /** + * BGRA pixel format. This is the same as @ref TJPF_BGRX, except that when + * decompressing, the X component is guaranteed to be 0xFF, which can be + * interpreted as an opaque alpha channel. + */ + TJPF_BGRA, + /** + * ABGR pixel format. This is the same as @ref TJPF_XBGR, except that when + * decompressing, the X component is guaranteed to be 0xFF, which can be + * interpreted as an opaque alpha channel. + */ + TJPF_ABGR, + /** + * ARGB pixel format. This is the same as @ref TJPF_XRGB, except that when + * decompressing, the X component is guaranteed to be 0xFF, which can be + * interpreted as an opaque alpha channel. + */ + TJPF_ARGB +}; + +/** + * Red offset (in bytes) for a given pixel format. This specifies the number + * of bytes that the red component is offset from the start of the pixel. For + * instance, if a pixel of format TJ_BGRX is stored in char pixel[], + * then the red component will be pixel[tjRedOffset[TJ_BGRX]]. + */ +static const int tjRedOffset[TJ_NUMPF] = {0, 2, 0, 2, 3, 1, 0, 0, 2, 3, 1}; +/** + * Green offset (in bytes) for a given pixel format. This specifies the number + * of bytes that the green component is offset from the start of the pixel. + * For instance, if a pixel of format TJ_BGRX is stored in + * char pixel[], then the green component will be + * pixel[tjGreenOffset[TJ_BGRX]]. + */ +static const int tjGreenOffset[TJ_NUMPF] = {1, 1, 1, 1, 2, 2, 0, 1, 1, 2, 2}; +/** + * Blue offset (in bytes) for a given pixel format. This specifies the number + * of bytes that the Blue component is offset from the start of the pixel. For + * instance, if a pixel of format TJ_BGRX is stored in char pixel[], + * then the blue component will be pixel[tjBlueOffset[TJ_BGRX]]. + */ +static const int tjBlueOffset[TJ_NUMPF] = {2, 0, 2, 0, 1, 3, 0, 2, 0, 1, 3}; + +/** + * Pixel size (in bytes) for a given pixel format. + */ +static const int tjPixelSize[TJ_NUMPF] = {3, 3, 4, 4, 4, 4, 1, 4, 4, 4, 4}; + + +/** + * The uncompressed source/destination image is stored in bottom-up (Windows, + * OpenGL) order, not top-down (X11) order. + */ +#define TJFLAG_BOTTOMUP 2 +/** + * Turn off CPU auto-detection and force TurboJPEG to use MMX code (IPP and + * 32-bit libjpeg-turbo versions only.) + */ +#define TJFLAG_FORCEMMX 8 +/** + * Turn off CPU auto-detection and force TurboJPEG to use SSE code (32-bit IPP + * and 32-bit libjpeg-turbo versions only) + */ +#define TJFLAG_FORCESSE 16 +/** + * Turn off CPU auto-detection and force TurboJPEG to use SSE2 code (32-bit IPP + * and 32-bit libjpeg-turbo versions only) + */ +#define TJFLAG_FORCESSE2 32 +/** + * Turn off CPU auto-detection and force TurboJPEG to use SSE3 code (64-bit IPP + * version only) + */ +#define TJFLAG_FORCESSE3 128 +/** + * Use fast, inaccurate chrominance upsampling routines in the JPEG + * decompressor (libjpeg and libjpeg-turbo versions only) + */ +#define TJFLAG_FASTUPSAMPLE 256 + + +/** + * Scaling factor + */ +typedef struct +{ + /** + * Numerator + */ + int num; + /** + * Denominator + */ + int denom; +} tjscalingfactor; + + +/** + * TurboJPEG instance handle + */ +typedef void* tjhandle; + + +/** + * Pad the given width to the nearest 32-bit boundary + */ +#define TJPAD(width) (((width)+3)&(~3)) + +/** + * Compute the scaled value of dimension using the given scaling + * factor. This macro performs the integer equivalent of ceil(dimension * + * scalingFactor). + */ +#define TJSCALED(dimension, scalingFactor) ((dimension * scalingFactor.num \ + + scalingFactor.denom - 1) / scalingFactor.denom) + + +#ifdef __cplusplus +extern "C" { +#endif + + +/** + * Create a TurboJPEG compressor instance. + * + * @return a handle to the newly-created instance, or NULL if an error + * occurred (see #tjGetErrorStr().) + */ +DLLEXPORT tjhandle DLLCALL tjInitCompress(void); + + +/** + * Compress an RGB or grayscale image into a JPEG image. + * + * @param handle a handle to a TurboJPEG compressor or transformer instance + * @param srcBuf pointer to an image buffer containing RGB or grayscale pixels + * to be compressed + * @param width width (in pixels) of the source image + * @param pitch bytes per line of the source image. Normally, this should be + * width * #tjPixelSize[pixelFormat] if the image is unpadded, + * or #TJPAD(width * #tjPixelSize[pixelFormat]) if each line of + * the image is padded to the nearest 32-bit boundary, as is the case + * for Windows bitmaps. You can also be clever and use this parameter + * to skip lines, etc. Setting this parameter to 0 is the equivalent of + * setting it to width * #tjPixelSize[pixelFormat]. + * @param height height (in pixels) of the source image + * @param pixelFormat pixel format of the source image (see @ref TJPF + * "Pixel formats".) + * @param jpegBuf address of a pointer to an image buffer that will receive the + * JPEG image. TurboJPEG has the ability to reallocate the JPEG buffer + * to accommodate the size of the JPEG image. Thus, you can choose to: + * -# pre-allocate the JPEG buffer with an arbitrary size using + * #tjAlloc() and let TurboJPEG grow the buffer as needed, + * -# set *jpegBuf to NULL to tell TurboJPEG to allocate the + * buffer for you, or + * -# pre-allocate the buffer to a "worst case" size determined by + * calling #tjBufSize(). This should ensure that the buffer never has + * to be re-allocated (setting #TJFLAG_NOREALLOC guarantees this.) + * . + * If you choose option 1, *jpegSize should be set to the + * size of your pre-allocated buffer. In any case, unless you have + * set #TJFLAG_NOREALLOC, you should always check *jpegBuf upon + * return from this function, as it may have changed. + * @param jpegSize pointer to an unsigned long variable that holds the size of + * the JPEG image buffer. If *jpegBuf points to a + * pre-allocated buffer, then *jpegSize should be set to the + * size of the buffer. Upon return, *jpegSize will contain the + * size of the JPEG image (in bytes.) + * @param jpegSubsamp the level of chrominance subsampling to be used when + * generating the JPEG image (see @ref TJSAMP + * "Chrominance subsampling options".) + * @param jpegQual the image quality of the generated JPEG image (1 = worst, + 100 = best) + * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP + * "flags". + * + * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().) +*/ +DLLEXPORT int DLLCALL tjCompress2(tjhandle handle, unsigned char *srcBuf, + int width, int pitch, int height, int pixelFormat, unsigned char **jpegBuf, + unsigned long *jpegSize, int jpegSubsamp, int jpegQual, int flags); + + +/** + * The maximum size of the buffer (in bytes) required to hold a JPEG image with + * the given parameters. The number of bytes returned by this function is + * larger than the size of the uncompressed source image. The reason for this + * is that the JPEG format uses 16-bit coefficients, and it is thus possible + * for a very high-quality JPEG image with very high frequency content to + * expand rather than compress when converted to the JPEG format. Such images + * represent a very rare corner case, but since there is no way to predict the + * size of a JPEG image prior to compression, the corner case has to be + * handled. + * + * @param width width of the image (in pixels) + * @param height height of the image (in pixels) + * @param jpegSubsamp the level of chrominance subsampling to be used when + * generating the JPEG image (see @ref TJSAMP + * "Chrominance subsampling options".) + * + * @return the maximum size of the buffer (in bytes) required to hold the + * image, or -1 if the arguments are out of bounds. + */ +DLLEXPORT unsigned long DLLCALL tjBufSize(int width, int height, + int jpegSubsamp); + + +/** + * Create a TurboJPEG decompressor instance. + * + * @return a handle to the newly-created instance, or NULL if an error + * occurred (see #tjGetErrorStr().) +*/ +DLLEXPORT tjhandle DLLCALL tjInitDecompress(void); + + +/** + * Retrieve information about a JPEG image without decompressing it. + * + * @param handle a handle to a TurboJPEG decompressor or transformer instance + * @param jpegBuf pointer to a buffer containing a JPEG image + * @param jpegSize size of the JPEG image (in bytes) + * @param width pointer to an integer variable that will receive the width (in + * pixels) of the JPEG image + * @param height pointer to an integer variable that will receive the height + * (in pixels) of the JPEG image + * @param jpegSubsamp pointer to an integer variable that will receive the + * level of chrominance subsampling used when compressing the JPEG image + * (see @ref TJSAMP "Chrominance subsampling options".) + * + * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().) +*/ +DLLEXPORT int DLLCALL tjDecompressHeader2(tjhandle handle, + unsigned char *jpegBuf, unsigned long jpegSize, int *width, int *height, + int *jpegSubsamp); + + +/** + * Returns a list of fractional scaling factors that the JPEG decompressor in + * this implementation of TurboJPEG supports. + * + * @param numscalingfactors pointer to an integer variable that will receive + * the number of elements in the list + * + * @return a pointer to a list of fractional scaling factors, or NULL if an + * error is encountered (see #tjGetErrorStr().) +*/ +DLLEXPORT tjscalingfactor* DLLCALL tjGetScalingFactors(int *numscalingfactors); + + +/** + * Decompress a JPEG image to an RGB or grayscale image. + * + * @param handle a handle to a TurboJPEG decompressor or transformer instance + * @param jpegBuf pointer to a buffer containing the JPEG image to decompress + * @param jpegSize size of the JPEG image (in bytes) + * @param dstBuf pointer to an image buffer that will receive the decompressed + * image. This buffer should normally be pitch * scaledHeight + * bytes in size, where scaledHeight can be determined by + * calling #TJSCALED() with the JPEG image height and one of the scaling + * factors returned by #tjGetScalingFactors(). The dstBuf pointer may + * also be used to decompress into a specific region of a larger buffer. + * @param width desired width (in pixels) of the destination image. If this is + * smaller than the width of the JPEG image being decompressed, then + * TurboJPEG will use scaling in the JPEG decompressor to generate the + * largest possible image that will fit within the desired width. If + * width is set to 0, then only the height will be considered when + * determining the scaled image size. + * @param pitch bytes per line of the destination image. Normally, this is + * scaledWidth * #tjPixelSize[pixelFormat] if the decompressed + * image is unpadded, else #TJPAD(scaledWidth * + * #tjPixelSize[pixelFormat]) if each line of the decompressed + * image is padded to the nearest 32-bit boundary, as is the case for + * Windows bitmaps. (NOTE: scaledWidth can be determined by + * calling #TJSCALED() with the JPEG image width and one of the scaling + * factors returned by #tjGetScalingFactors().) You can also be clever + * and use the pitch parameter to skip lines, etc. Setting this + * parameter to 0 is the equivalent of setting it to scaledWidth + * * #tjPixelSize[pixelFormat]. + * @param height desired height (in pixels) of the destination image. If this + * is smaller than the height of the JPEG image being decompressed, then + * TurboJPEG will use scaling in the JPEG decompressor to generate the + * largest possible image that will fit within the desired height. If + * height is set to 0, then only the width will be considered when + * determining the scaled image size. + * @param pixelFormat pixel format of the destination image (see @ref + * TJPF "Pixel formats".) + * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP + * "flags". + * + * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().) + */ +DLLEXPORT int DLLCALL tjDecompress2(tjhandle handle, + unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf, + int width, int pitch, int height, int pixelFormat, int flags); + + +/** + * Destroy a TurboJPEG compressor, decompressor, or transformer instance. + * + * @param handle a handle to a TurboJPEG compressor, decompressor or + * transformer instance + * + * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().) + */ +DLLEXPORT int DLLCALL tjDestroy(tjhandle handle); + + +/** + * Returns a descriptive error message explaining why the last command failed. + * + * @return a descriptive error message explaining why the last command failed. + */ +DLLEXPORT char* DLLCALL tjGetErrorStr(void); + + +/* Backward compatibility functions and macros (nothing to see here) */ +#define NUMSUBOPT TJ_NUMSAMP +#define TJ_444 TJSAMP_444 +#define TJ_422 TJSAMP_422 +#define TJ_420 TJSAMP_420 +#define TJ_411 TJSAMP_420 +#define TJ_GRAYSCALE TJSAMP_GRAY + +#define TJ_BGR 1 +#define TJ_BOTTOMUP TJFLAG_BOTTOMUP +#define TJ_FORCEMMX TJFLAG_FORCEMMX +#define TJ_FORCESSE TJFLAG_FORCESSE +#define TJ_FORCESSE2 TJFLAG_FORCESSE2 +#define TJ_ALPHAFIRST 64 +#define TJ_FORCESSE3 TJFLAG_FORCESSE3 +#define TJ_FASTUPSAMPLE TJFLAG_FASTUPSAMPLE + +DLLEXPORT unsigned long DLLCALL TJBUFSIZE(int width, int height); + +DLLEXPORT int DLLCALL tjCompress(tjhandle handle, unsigned char *srcBuf, + int width, int pitch, int height, int pixelSize, unsigned char *dstBuf, + unsigned long *compressedSize, int jpegSubsamp, int jpegQual, int flags); + +DLLEXPORT int DLLCALL tjDecompressHeader(tjhandle handle, + unsigned char *jpegBuf, unsigned long jpegSize, int *width, int *height); + +DLLEXPORT int DLLCALL tjDecompress(tjhandle handle, + unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf, + int width, int pitch, int height, int pixelSize, int flags); + + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/common/vncauth.c b/jni/vnc/LibVNCServer-0.9.9/common/vncauth.c new file mode 100644 index 0000000..82c1b68 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/vncauth.c @@ -0,0 +1,211 @@ +/* + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * vncauth.c - Functions for VNC password management and authentication. + */ + +#ifdef __STRICT_ANSI__ +#define _BSD_SOURCE +#define _POSIX_SOURCE +#endif +#ifdef LIBVNCSERVER_HAVE_SYS_TYPES_H +#include +#endif +#include +#include +#include +#include +#include "d3des.h" + +#include +#include + +#ifdef LIBVNCSERVER_HAVE_SYS_STAT_H +#include +#endif + +#include + +#ifdef WIN32 +#define srandom srand +#define random rand +#else +#include +#endif + + +/* libvncclient does not need this */ +#ifndef rfbEncryptBytes + +/* + * We use a fixed key to store passwords, since we assume that our local + * file system is secure but nonetheless don't want to store passwords + * as plaintext. + */ + +static unsigned char fixedkey[8] = {23,82,107,6,35,78,88,7}; + + +/* + * Encrypt a password and store it in a file. Returns 0 if successful, + * 1 if the file could not be written. + */ + +int +rfbEncryptAndStorePasswd(char *passwd, char *fname) +{ + FILE *fp; + unsigned int i; + unsigned char encryptedPasswd[8]; + + if ((fp = fopen(fname,"w")) == NULL) return 1; + + /* windows security sux */ +#ifndef WIN32 + fchmod(fileno(fp), S_IRUSR|S_IWUSR); +#endif + + /* pad password with nulls */ + + for (i = 0; i < 8; i++) { + if (i < strlen(passwd)) { + encryptedPasswd[i] = passwd[i]; + } else { + encryptedPasswd[i] = 0; + } + } + + /* Do encryption in-place - this way we overwrite our copy of the plaintext + password */ + + rfbDesKey(fixedkey, EN0); + rfbDes(encryptedPasswd, encryptedPasswd); + + for (i = 0; i < 8; i++) { + putc(encryptedPasswd[i], fp); + } + + fclose(fp); + return 0; +} + + +/* + * Decrypt a password from a file. Returns a pointer to a newly allocated + * string containing the password or a null pointer if the password could + * not be retrieved for some reason. + */ + +char * +rfbDecryptPasswdFromFile(char *fname) +{ + FILE *fp; + int i, ch; + unsigned char *passwd = (unsigned char *)malloc(9); + + if ((fp = fopen(fname,"r")) == NULL) { + free(passwd); + return NULL; + } + + for (i = 0; i < 8; i++) { + ch = getc(fp); + if (ch == EOF) { + fclose(fp); + free(passwd); + return NULL; + } + passwd[i] = ch; + } + + fclose(fp); + + rfbDesKey(fixedkey, DE1); + rfbDes(passwd, passwd); + + passwd[8] = 0; + + return (char *)passwd; +} + + +/* + * Generate CHALLENGESIZE random bytes for use in challenge-response + * authentication. + */ + +void +rfbRandomBytes(unsigned char *bytes) +{ + int i; + static rfbBool s_srandom_called = FALSE; + + if (!s_srandom_called) { + srandom((unsigned int)time(NULL) ^ (unsigned int)getpid()); + s_srandom_called = TRUE; + } + + for (i = 0; i < CHALLENGESIZE; i++) { + bytes[i] = (unsigned char)(random() & 255); + } +} + +#endif + +/* + * Encrypt CHALLENGESIZE bytes in memory using a password. + */ + +void +rfbEncryptBytes(unsigned char *bytes, char *passwd) +{ + unsigned char key[8]; + unsigned int i; + + /* key is simply password padded with nulls */ + + for (i = 0; i < 8; i++) { + if (i < strlen(passwd)) { + key[i] = passwd[i]; + } else { + key[i] = 0; + } + } + + rfbDesKey(key, EN0); + + for (i = 0; i < CHALLENGESIZE; i += 8) { + rfbDes(bytes+i, bytes+i); + } +} + +void +rfbEncryptBytes2(unsigned char *where, const int length, unsigned char *key) { + int i, j; + rfbDesKey(key, EN0); + for (i = 0; i< 8; i++) + where[i] ^= key[i]; + rfbDes(where, where); + for (i = 8; i < length; i += 8) { + for (j = 0; j < 8; j++) + where[i + j] ^= where[i + j - 8]; + rfbDes(where + i, where + i); + } +} diff --git a/jni/vnc/LibVNCServer-0.9.9/common/zywrletemplate.c b/jni/vnc/LibVNCServer-0.9.9/common/zywrletemplate.c new file mode 100644 index 0000000..904de40 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/common/zywrletemplate.c @@ -0,0 +1,828 @@ + +/******************************************************************** + * * + * THIS FILE IS PART OF THE 'ZYWRLE' VNC CODEC SOURCE CODE. * + * * + * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS * + * GOVERNED BY A FOLLOWING BSD-STYLE SOURCE LICENSE. * + * PLEASE READ THESE TERMS BEFORE DISTRIBUTING. * + * * + * THE 'ZYWRLE' VNC CODEC SOURCE CODE IS (C) COPYRIGHT 2006 * + * BY Hitachi Systems & Services, Ltd. * + * (Noriaki Yamazaki, Research & Developement Center) * * + * * + ******************************************************************** +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: + +- Redistributions of source code must retain the above copyright +notice, this list of conditions and the following disclaimer. + +- Redistributions in binary form must reproduce the above copyright +notice, this list of conditions and the following disclaimer in the +documentation and/or other materials provided with the distribution. + +- Neither the name of the Hitachi Systems & Services, Ltd. nor +the names of its contributors may be used to endorse or promote +products derived from this software without specific prior written +permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION +OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ********************************************************************/ + +/* Change Log: + V0.02 : 2008/02/04 : Fix mis encode/decode when width != scanline + (Thanks Johannes Schindelin, author of LibVNC + Server/Client) + V0.01 : 2007/02/06 : Initial release +*/ + +/* #define ZYWRLE_ENCODE */ +/* #define ZYWRLE_DECODE */ +#define ZYWRLE_QUANTIZE + +/* +[References] + PLHarr: + Senecal, J. G., P. Lindstrom, M. A. Duchaineau, and K. I. Joy, "An Improved N-Bit to N-Bit Reversible Haar-Like Transform," Pacific Graphics 2004, October 2004, pp. 371-380. + EZW: + Shapiro, JM: Embedded Image Coding Using Zerotrees of Wavelet Coefficients, IEEE Trans. Signal. Process., Vol.41, pp.3445-3462 (1993). +*/ + + +/* Template Macro stuffs. */ +#undef ZYWRLE_ANALYZE +#undef ZYWRLE_SYNTHESIZE +#define ZYWRLE_ANALYZE __RFB_CONCAT3E(zywrleAnalyze,BPP,END_FIX) +#define ZYWRLE_SYNTHESIZE __RFB_CONCAT3E(zywrleSynthesize,BPP,END_FIX) + +#define ZYWRLE_RGBYUV __RFB_CONCAT3E(zywrleRGBYUV,BPP,END_FIX) +#define ZYWRLE_YUVRGB __RFB_CONCAT3E(zywrleYUVRGB,BPP,END_FIX) +#define ZYWRLE_YMASK __RFB_CONCAT2E(ZYWRLE_YMASK,BPP) +#define ZYWRLE_UVMASK __RFB_CONCAT2E(ZYWRLE_UVMASK,BPP) +#define ZYWRLE_LOAD_PIXEL __RFB_CONCAT2E(ZYWRLE_LOAD_PIXEL,BPP) +#define ZYWRLE_SAVE_PIXEL __RFB_CONCAT2E(ZYWRLE_SAVE_PIXEL,BPP) + +/* Packing/Unpacking pixel stuffs. + Endian conversion stuffs. */ +#undef S_0 +#undef S_1 +#undef L_0 +#undef L_1 +#undef L_2 +#if ZYWRLE_ENDIAN == ENDIAN_BIG +# define S_0 1 +# define S_1 0 +# define L_0 3 +# define L_1 2 +# define L_2 1 +#else +# define S_0 0 +# define S_1 1 +# define L_0 0 +# define L_1 1 +# define L_2 2 +#endif + +/* Load/Save pixel stuffs. */ +#define ZYWRLE_YMASK15 0xFFFFFFF8 +#define ZYWRLE_UVMASK15 0xFFFFFFF8 +#define ZYWRLE_LOAD_PIXEL15(pSrc,R,G,B) { \ + R = (((unsigned char*)pSrc)[S_1]<< 1)& 0xF8; \ + G = ((((unsigned char*)pSrc)[S_1]<< 6)|(((unsigned char*)pSrc)[S_0]>> 2))& 0xF8; \ + B = (((unsigned char*)pSrc)[S_0]<< 3)& 0xF8; \ +} +#define ZYWRLE_SAVE_PIXEL15(pDst,R,G,B) { \ + R &= 0xF8; \ + G &= 0xF8; \ + B &= 0xF8; \ + ((unsigned char*)pDst)[S_1] = (unsigned char)( (R>>1)|(G>>6) ); \ + ((unsigned char*)pDst)[S_0] = (unsigned char)(((B>>3)|(G<<2))& 0xFF); \ +} +#define ZYWRLE_YMASK16 0xFFFFFFFC +#define ZYWRLE_UVMASK16 0xFFFFFFF8 +#define ZYWRLE_LOAD_PIXEL16(pSrc,R,G,B) { \ + R = ((unsigned char*)pSrc)[S_1] & 0xF8; \ + G = ((((unsigned char*)pSrc)[S_1]<< 5)|(((unsigned char*)pSrc)[S_0]>> 3))& 0xFC; \ + B = (((unsigned char*)pSrc)[S_0]<< 3)& 0xF8; \ +} +#define ZYWRLE_SAVE_PIXEL16(pDst,R,G,B) { \ + R &= 0xF8; \ + G &= 0xFC; \ + B &= 0xF8; \ + ((unsigned char*)pDst)[S_1] = (unsigned char)( R |(G>>5) ); \ + ((unsigned char*)pDst)[S_0] = (unsigned char)(((B>>3)|(G<<3))& 0xFF); \ +} +#define ZYWRLE_YMASK32 0xFFFFFFFF +#define ZYWRLE_UVMASK32 0xFFFFFFFF +#define ZYWRLE_LOAD_PIXEL32(pSrc,R,G,B) { \ + R = ((unsigned char*)pSrc)[L_2]; \ + G = ((unsigned char*)pSrc)[L_1]; \ + B = ((unsigned char*)pSrc)[L_0]; \ +} +#define ZYWRLE_SAVE_PIXEL32(pDst,R,G,B) { \ + ((unsigned char*)pDst)[L_2] = (unsigned char)R; \ + ((unsigned char*)pDst)[L_1] = (unsigned char)G; \ + ((unsigned char*)pDst)[L_0] = (unsigned char)B; \ +} + +#ifndef ZYWRLE_ONCE +#define ZYWRLE_ONCE + +#ifdef WIN32 +#define InlineX __inline +#else +# ifndef __STRICT_ANSI__ +# define InlineX inline +# else +# define InlineX +# endif +#endif + +#ifdef ZYWRLE_ENCODE +/* Tables for Coefficients filtering. */ +# ifndef ZYWRLE_QUANTIZE +/* Type A:lower bit omitting of EZW style. */ +const static unsigned int zywrleParam[3][3]={ + {0x0000F000,0x00000000,0x00000000}, + {0x0000C000,0x00F0F0F0,0x00000000}, + {0x0000C000,0x00C0C0C0,0x00F0F0F0}, +/* {0x0000FF00,0x00000000,0x00000000}, + {0x0000FF00,0x00FFFFFF,0x00000000}, + {0x0000FF00,0x00FFFFFF,0x00FFFFFF}, */ +}; +# else +/* Type B:Non liner quantization filter. */ +static const signed char zywrleConv[4][256]={ +{ /* bi=5, bo=5 r=0.0:PSNR=24.849 */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, +}, +{ /* bi=5, bo=5 r=2.0:PSNR=74.031 */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 32, + 32, 32, 32, 32, 32, 32, 32, 32, + 32, 32, 32, 32, 32, 32, 32, 32, + 48, 48, 48, 48, 48, 48, 48, 48, + 48, 48, 48, 56, 56, 56, 56, 56, + 56, 56, 56, 56, 64, 64, 64, 64, + 64, 64, 64, 64, 72, 72, 72, 72, + 72, 72, 72, 72, 80, 80, 80, 80, + 80, 80, 88, 88, 88, 88, 88, 88, + 88, 88, 88, 88, 88, 88, 96, 96, + 96, 96, 96, 104, 104, 104, 104, 104, + 104, 104, 104, 104, 104, 112, 112, 112, + 112, 112, 112, 112, 112, 112, 120, 120, + 120, 120, 120, 120, 120, 120, 120, 120, + 0, -120, -120, -120, -120, -120, -120, -120, + -120, -120, -120, -112, -112, -112, -112, -112, + -112, -112, -112, -112, -104, -104, -104, -104, + -104, -104, -104, -104, -104, -104, -96, -96, + -96, -96, -96, -88, -88, -88, -88, -88, + -88, -88, -88, -88, -88, -88, -88, -80, + -80, -80, -80, -80, -80, -72, -72, -72, + -72, -72, -72, -72, -72, -64, -64, -64, + -64, -64, -64, -64, -64, -56, -56, -56, + -56, -56, -56, -56, -56, -56, -48, -48, + -48, -48, -48, -48, -48, -48, -48, -48, + -48, -32, -32, -32, -32, -32, -32, -32, + -32, -32, -32, -32, -32, -32, -32, -32, + -32, -32, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, +}, +{ /* bi=5, bo=4 r=2.0:PSNR=64.441 */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 48, 48, 48, 48, 48, 48, 48, 48, + 48, 48, 48, 48, 48, 48, 48, 48, + 48, 48, 48, 48, 48, 48, 48, 48, + 64, 64, 64, 64, 64, 64, 64, 64, + 64, 64, 64, 64, 64, 64, 64, 64, + 80, 80, 80, 80, 80, 80, 80, 80, + 80, 80, 80, 80, 80, 88, 88, 88, + 88, 88, 88, 88, 88, 88, 88, 88, + 104, 104, 104, 104, 104, 104, 104, 104, + 104, 104, 104, 112, 112, 112, 112, 112, + 112, 112, 112, 112, 120, 120, 120, 120, + 120, 120, 120, 120, 120, 120, 120, 120, + 0, -120, -120, -120, -120, -120, -120, -120, + -120, -120, -120, -120, -120, -112, -112, -112, + -112, -112, -112, -112, -112, -112, -104, -104, + -104, -104, -104, -104, -104, -104, -104, -104, + -104, -88, -88, -88, -88, -88, -88, -88, + -88, -88, -88, -88, -80, -80, -80, -80, + -80, -80, -80, -80, -80, -80, -80, -80, + -80, -64, -64, -64, -64, -64, -64, -64, + -64, -64, -64, -64, -64, -64, -64, -64, + -64, -48, -48, -48, -48, -48, -48, -48, + -48, -48, -48, -48, -48, -48, -48, -48, + -48, -48, -48, -48, -48, -48, -48, -48, + -48, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, +}, +{ /* bi=5, bo=2 r=2.0:PSNR=43.175 */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 88, 88, 88, 88, 88, 88, 88, 88, + 88, 88, 88, 88, 88, 88, 88, 88, + 88, 88, 88, 88, 88, 88, 88, 88, + 88, 88, 88, 88, 88, 88, 88, 88, + 88, 88, 88, 88, 88, 88, 88, 88, + 88, 88, 88, 88, 88, 88, 88, 88, + 88, 88, 88, 88, 88, 88, 88, 88, + 88, 88, 88, 88, 88, 88, 88, 88, + 0, -88, -88, -88, -88, -88, -88, -88, + -88, -88, -88, -88, -88, -88, -88, -88, + -88, -88, -88, -88, -88, -88, -88, -88, + -88, -88, -88, -88, -88, -88, -88, -88, + -88, -88, -88, -88, -88, -88, -88, -88, + -88, -88, -88, -88, -88, -88, -88, -88, + -88, -88, -88, -88, -88, -88, -88, -88, + -88, -88, -88, -88, -88, -88, -88, -88, + -88, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, +} +}; +const static signed char* zywrleParam[3][3][3]={ + {{zywrleConv[0],zywrleConv[2],zywrleConv[0]},{zywrleConv[0],zywrleConv[0],zywrleConv[0]},{zywrleConv[0],zywrleConv[0],zywrleConv[0]}}, + {{zywrleConv[0],zywrleConv[3],zywrleConv[0]},{zywrleConv[1],zywrleConv[1],zywrleConv[1]},{zywrleConv[0],zywrleConv[0],zywrleConv[0]}}, + {{zywrleConv[0],zywrleConv[3],zywrleConv[0]},{zywrleConv[2],zywrleConv[2],zywrleConv[2]},{zywrleConv[1],zywrleConv[1],zywrleConv[1]}}, +}; +# endif +#endif + +static InlineX void Harr(signed char* pX0, signed char* pX1) +{ + /* Piecewise-Linear Harr(PLHarr) */ + int X0 = (int)*pX0, X1 = (int)*pX1; + int orgX0 = X0, orgX1 = X1; + if ((X0 ^ X1) & 0x80) { + /* differ sign */ + X1 += X0; + if (((X1^orgX1)&0x80)==0) { + /* |X1| > |X0| */ + X0 -= X1; /* H = -B */ + } + } else { + /* same sign */ + X0 -= X1; + if (((X0 ^ orgX0) & 0x80) == 0) { + /* |X0| > |X1| */ + X1 += X0; /* L = A */ + } + } + *pX0 = (signed char)X1; + *pX1 = (signed char)X0; +} +/* + 1D-Wavelet transform. + + In coefficients array, the famous 'pyramid' decomposition is well used. + + 1D Model: + |L0L0L0L0|L0L0L0L0|H0H0H0H0|H0H0H0H0| : level 0 + |L1L1L1L1|H1H1H1H1|H0H0H0H0|H0H0H0H0| : level 1 + + But this method needs line buffer because H/L is different position from X0/X1. + So, I used 'interleave' decomposition instead of it. + + 1D Model: + |L0H0L0H0|L0H0L0H0|L0H0L0H0|L0H0L0H0| : level 0 + |L1H0H1H0|L1H0H1H0|L1H0H1H0|L1H0H1H0| : level 1 + + In this method, H/L and X0/X1 is always same position. + This lead us to more speed and less memory. + Of cause, the result of both method is quite same + because it's only difference that coefficient position. +*/ +static InlineX void WaveletLevel(int* data, int size, int l, int SkipPixel) +{ + int s, ofs; + signed char* pX0; + signed char* end; + + pX0 = (signed char*)data; + s = (8<>(l+1))*s; + s -= 2; + ofs = (4<>1; + if (r & 0x02) + pH += (s>>1)*width; + for (y = 0; y < height / s; y++) { + for (x = 0; x < width / s; x++) { + /* + these are same following code. + pH[x] = pH[x] / (~pM[x]+1) * (~pM[x]+1); + ( round pH[x] with pM[x] bit ) + '&' operator isn't 'round' but is 'floor'. + So, we must offset when pH[x] is negative. + */ + if (((signed char*)pH)[0] & 0x80) + ((signed char*)pH)[0] += ~((signed char*)pM)[0]; + if (((signed char*)pH)[1] & 0x80) + ((signed char*)pH)[1] += ~((signed char*)pM)[1]; + if (((signed char*)pH)[2] & 0x80) + ((signed char*)pH)[2] += ~((signed char*)pM)[2]; + *pH &= *pM; + pH += s; + } + pH += (s-1)*width; + } + } +} +# else +/* + Type B:Non liner quantization filter. + + Coefficients have Gaussian curve and smaller value which is + large part of coefficients isn't more important than larger value. + So, I use filter of Non liner quantize/dequantize table. + In general, Non liner quantize formula is explained as following. + + y=f(x) = sign(x)*round( ((abs(x)/(2^7))^ r )* 2^(bo-1) )*2^(8-bo) + x=f-1(y) = sign(y)*round( ((abs(y)/(2^7))^(1/r))* 2^(bi-1) )*2^(8-bi) + ( r:power coefficient bi:effective MSB in input bo:effective MSB in output ) + + r < 1.0 : Smaller value is more important than larger value. + r > 1.0 : Larger value is more important than smaller value. + r = 1.0 : Liner quantization which is same with EZW style. + + r = 0.75 is famous non liner quantization used in MP3 audio codec. + In contrast to audio data, larger value is important in wavelet coefficients. + So, I select r = 2.0 table( quantize is x^2, dequantize sqrt(x) ). + + As compared with EZW style liner quantization, this filter tended to be + more sharp edge and be more compression rate but be more blocking noise and be less quality. + Especially, the surface of graphic objects has distinguishable noise in middle quality mode. + + We need only quantized-dequantized(filtered) value rather than quantized value itself + because all values are packed or palette-lized in later ZRLE section. + This lead us not to need to modify client decoder when we change + the filtering procedure in future. + Client only decodes coefficients given by encoder. +*/ +static InlineX void FilterWaveletSquare(int* pBuf, int width, int height, int level, int l) +{ + int r, s; + int x, y; + int* pH; + const signed char** pM; + + pM = zywrleParam[level-1][l]; + s = 2<>1; + if (r & 0x02) + pH += (s>>1)*width; + for (y = 0; y < height / s; y++) { + for (x = 0; x < width / s; x++) { + ((signed char*)pH)[0] = pM[0][((unsigned char*)pH)[0]]; + ((signed char*)pH)[1] = pM[1][((unsigned char*)pH)[1]]; + ((signed char*)pH)[2] = pM[2][((unsigned char*)pH)[2]]; + pH += s; + } + pH += (s-1)*width; + } + } +} +# endif + +static InlineX void Wavelet(int* pBuf, int width, int height, int level) +{ + int l, s; + int* pTop; + int* pEnd; + + for (l = 0; l < level; l++) { + pTop = pBuf; + pEnd = pBuf+height*width; + s = width<= 0; l--) { + pTop = pBuf; + pEnd = pBuf+width; + s = 1< YUV conversion stuffs. + YUV coversion is explained as following formula in strict meaning: + Y = 0.299R + 0.587G + 0.114B ( 0<=Y<=255) + U = -0.169R - 0.331G + 0.500B (-128<=U<=127) + V = 0.500R - 0.419G - 0.081B (-128<=V<=127) + + I use simple conversion RCT(reversible color transform) which is described + in JPEG-2000 specification. + Y = (R + 2G + B)/4 ( 0<=Y<=255) + U = B-G (-256<=U<=255) + V = R-G (-256<=V<=255) +*/ +#define ROUND(x) (((x)<0)?0:(((x)>255)?255:(x))) + /* RCT is N-bit RGB to N-bit Y and N+1-bit UV. + For make Same N-bit, UV is lossy. + More exact PLHarr, we reduce to odd range(-127<=x<=127). */ +#define ZYWRLE_RGBYUV1(R,G,B,Y,U,V,ymask,uvmask) { \ + Y = (R+(G<<1)+B)>>2; \ + U = B-G; \ + V = R-G; \ + Y -= 128; \ + U >>= 1; \ + V >>= 1; \ + Y &= ymask; \ + U &= uvmask; \ + V &= uvmask; \ + if (Y == -128) \ + Y += (0xFFFFFFFF-ymask+1); \ + if (U == -128) \ + U += (0xFFFFFFFF-uvmask+1); \ + if (V == -128) \ + V += (0xFFFFFFFF-uvmask+1); \ +} +#define ZYWRLE_YUVRGB1(R,G,B,Y,U,V) { \ + Y += 128; \ + U <<= 1; \ + V <<= 1; \ + G = Y-((U+V)>>2); \ + B = U+G; \ + R = V+G; \ + G = ROUND(G); \ + B = ROUND(B); \ + R = ROUND(R); \ +} + +/* + coefficient packing/unpacking stuffs. + Wavelet transform makes 4 sub coefficient image from 1 original image. + + model with pyramid decomposition: + +------+------+ + | | | + | L | Hx | + | | | + +------+------+ + | | | + | H | Hxy | + | | | + +------+------+ + + So, we must transfer each sub images individually in strict meaning. + But at least ZRLE meaning, following one decompositon image is same as + avobe individual sub image. I use this format. + (Strictly saying, transfer order is reverse(Hxy->Hy->Hx->L) + for simplified procedure for any wavelet level.) + + +------+------+ + | L | + +------+------+ + | Hx | + +------+------+ + | Hy | + +------+------+ + | Hxy | + +------+------+ +*/ +#define INC_PTR(data) \ + data++; \ + if( data-pData >= (w+uw) ){ \ + data += scanline-(w+uw); \ + pData = data; \ + } + +#define ZYWRLE_TRANSFER_COEFF(pBuf,data,r,w,h,scanline,level,TRANS) \ + pH = pBuf; \ + s = 2<>1; \ + if (r & 0x02) \ + pH += (s>>1)*w; \ + pEnd = pH+h*w; \ + while (pH < pEnd) { \ + pLine = pH+w; \ + while (pH < pLine) { \ + TRANS \ + INC_PTR(data) \ + pH += s; \ + } \ + pH += (s-1)*w; \ + } + +#define ZYWRLE_PACK_COEFF(pBuf,data,r,width,height,scanline,level) \ + ZYWRLE_TRANSFER_COEFF(pBuf,data,r,width,height,scanline,level,ZYWRLE_LOAD_COEFF(pH,R,G,B);ZYWRLE_SAVE_PIXEL(data,R,G,B);) + +#define ZYWRLE_UNPACK_COEFF(pBuf,data,r,width,height,scanline,level) \ + ZYWRLE_TRANSFER_COEFF(pBuf,data,r,width,height,scanline,level,ZYWRLE_LOAD_PIXEL(data,R,G,B);ZYWRLE_SAVE_COEFF(pH,R,G,B);) + +#define ZYWRLE_SAVE_UNALIGN(data,TRANS) \ + pTop = pBuf+w*h; \ + pEnd = pBuf + (w+uw)*(h+uh); \ + while (pTop < pEnd) { \ + TRANS \ + INC_PTR(data) \ + pTop++; \ + } + +#define ZYWRLE_LOAD_UNALIGN(data,TRANS) \ + pTop = pBuf+w*h; \ + if (uw) { \ + pData= data + w; \ + pEnd = (int*)(pData+ h*scanline); \ + while (pData < (PIXEL_T*)pEnd) { \ + pLine = (int*)(pData + uw); \ + while (pData < (PIXEL_T*)pLine) { \ + TRANS \ + pData++; \ + pTop++; \ + } \ + pData += scanline-uw; \ + } \ + } \ + if (uh) { \ + pData= data + h*scanline; \ + pEnd = (int*)(pData+ uh*scanline); \ + while (pData < (PIXEL_T*)pEnd) { \ + pLine = (int*)(pData + w); \ + while (pData < (PIXEL_T*)pLine) { \ + TRANS \ + pData++; \ + pTop++; \ + } \ + pData += scanline-w; \ + } \ + } \ + if (uw && uh) { \ + pData= data + w+ h*scanline; \ + pEnd = (int*)(pData+ uh*scanline); \ + while (pData < (PIXEL_T*)pEnd) { \ + pLine = (int*)(pData + uw); \ + while (pData < (PIXEL_T*)pLine) { \ + TRANS \ + pData++; \ + pTop++; \ + } \ + pData += scanline-uw; \ + } \ + } + +static InlineX void zywrleCalcSize(int* pW, int* pH, int level) +{ + *pW &= ~((1<. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand `-c -o'. +Remove `-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file `INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; +esac + +ofile= +cfile= +eat= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as `compile cc -o foo foo.c'. + # So we strip `-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no `-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # `.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use `[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/jni/vnc/LibVNCServer-0.9.9/config.guess b/jni/vnc/LibVNCServer-0.9.9/config.guess new file mode 100755 index 0000000..c2246a4 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/config.guess @@ -0,0 +1,1502 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 +# Free Software Foundation, Inc. + +timestamp='2009-12-30' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner. Please send patches (context +# diff format) to and include a ChangeLog +# entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free +Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[456]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/jni/vnc/LibVNCServer-0.9.9/config.sub b/jni/vnc/LibVNCServer-0.9.9/config.sub new file mode 100755 index 0000000..c2d1257 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/config.sub @@ -0,0 +1,1714 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 +# Free Software Foundation, Inc. + +timestamp='2010-01-22' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted GNU ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free +Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ + uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nios | nios2 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e \ + | we32k \ + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12 | picochip) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile-* | tilegx-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze) + basic_machine=microblaze-xilinx + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + # This must be matched before tile*. + tilegx*) + basic_machine=tilegx-unknown + os=-linux-gnu + ;; + tile*) + basic_machine=tile-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/jni/vnc/LibVNCServer-0.9.9/configure b/jni/vnc/LibVNCServer-0.9.9/configure new file mode 100755 index 0000000..4f5ccbf --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/configure @@ -0,0 +1,26504 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.67 for LibVNCServer 0.9.9. +# +# Report bugs to . +# +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software +# Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + # We cannot yet assume a decent shell, so we have to provide a + # neutralization value for shells without unset; and this also + # works around shells that cannot unset nonexistent variables. + BASH_ENV=/dev/null + ENV=/dev/null + (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: http://sourceforge.net/projects/libvncserver about your +$0: system, including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in #( + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +echo=${ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null 2>&1 && unset CDPATH + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + + + +tagnames=${tagnames+${tagnames},}CXX + +tagnames=${tagnames+${tagnames},}F77 + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='LibVNCServer' +PACKAGE_TARNAME='libvncserver' +PACKAGE_VERSION='0.9.9' +PACKAGE_STRING='LibVNCServer 0.9.9' +PACKAGE_BUGREPORT='http://sourceforge.net/projects/libvncserver' +PACKAGE_URL='' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +RPMSOURCEDIR +WITH_X11VNC_FALSE +WITH_X11VNC_TRUE +HAVE_RPM_FALSE +HAVE_RPM_TRUE +ANDROID_FALSE +ANDROID_TRUE +OSX_FALSE +OSX_TRUE +LINUX_FALSE +LINUX_TRUE +CYGIPC_FALSE +CYGIPC_TRUE +LIBOBJS +HAVE_GNUTLS_FALSE +HAVE_GNUTLS_TRUE +GNUTLS_LIBS +GNUTLS_CFLAGS +LIBGCRYPT_LIBS +LIBGCRYPT_CFLAGS +LIBGCRYPT_CONFIG +WSOCKLIB +MINGW_FALSE +MINGW_TRUE +HAVE_LIBGTK_FALSE +HAVE_LIBGTK_TRUE +GTK_LIBS +GTK_CFLAGS +PKG_CONFIG_LIBDIR +PKG_CONFIG_PATH +PKG_CONFIG +SDL_LIBS +SDL_CFLAGS +HAVE_LIBSDL_FALSE +HAVE_LIBSDL_TRUE +HAVE_LIBPNG_FALSE +HAVE_LIBPNG_TRUE +HAVE_LIBJPEG_FALSE +HAVE_LIBJPEG_TRUE +HAVE_LIBZ_FALSE +HAVE_LIBZ_TRUE +WITH_WEBSOCKETS_FALSE +WITH_WEBSOCKETS_TRUE +WITH_TIGHTVNC_FILETRANSFER_FALSE +WITH_TIGHTVNC_FILETRANSFER_TRUE +HAVE_LIBPTHREAD_FALSE +HAVE_LIBPTHREAD_TRUE +JPEG_LDFLAGS +HAVE_SYSTEM_LIBVNCSERVER_FALSE +HAVE_SYSTEM_LIBVNCSERVER_TRUE +SYSTEM_LIBVNCSERVER_LIBS +SYSTEM_LIBVNCSERVER_CFLAGS +OSX_OPENGL_FALSE +OSX_OPENGL_TRUE +AVAHI_LIBS +AVAHI_CFLAGS +HAVE_X11_FALSE +HAVE_X11_TRUE +X_EXTRA_LIBS +X_LIBS +X_PRE_LIBS +X_CFLAGS +XMKMF +HAVE_LIBSSL_FALSE +HAVE_LIBSSL_TRUE +SSL_LIBS +CRYPT_LIBS +HAVE_MP3LAME_FALSE +HAVE_MP3LAME_TRUE +WITH_FFMPEG_FALSE +WITH_FFMPEG_TRUE +with_ffmpeg +LIBTOOL +ac_ct_F77 +FFLAGS +F77 +CXXCPP +am__fastdepCXX_FALSE +am__fastdepCXX_TRUE +CXXDEPMODE +ac_ct_CXX +CXXFLAGS +CXX +CPP +OBJDUMP +AS +DLLTOOL +RANLIB +AR +ECHO +LN_S +EGREP +GREP +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_dependency_tracking +enable_shared +enable_static +enable_fast_install +with_gnu_ld +enable_libtool_lock +with_pic +with_tags +with_tightvnc_filetransfer +with_websockets +with_24bpp +with_ffmpeg +with_crypt +with_crypto +with_ssl +with_x +with_system_libvncserver +with_x11vnc +with_xkeyboard +with_xinerama +with_xrandr +with_xfixes +with_xdamage +with_xtrap +with_xrecord +with_fbpm +with_dpms +with_v4l +with_fbdev +with_uinput +with_macosx_native +with_avahi +with_jpeg +with_png +with_libz +with_zlib +with_pthread +with_sdl_config +with_gcrypt +with_client_gcrypt +with_libgcrypt_prefix +with_gnutls +with_ipv6 +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP +CXX +CXXFLAGS +CCC +CXXCPP +F77 +FFLAGS +XMKMF +JPEG_LDFLAGS +PKG_CONFIG +PKG_CONFIG_PATH +PKG_CONFIG_LIBDIR +GTK_CFLAGS +GTK_LIBS +GNUTLS_CFLAGS +GNUTLS_LIBS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used" >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures LibVNCServer 0.9.9 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/libvncserver] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +X features: + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of LibVNCServer 0.9.9:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: `make V=1') + --disable-silent-rules verbose build output (undo: `make V=0') + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-tags[=TAGS] include additional configurations [automatic] + --without-filetransfer disable TightVNC file transfer protocol + --without-websockets disable WebSockets support + --without-24bpp disable 24 bpp framebuffers + --with-ffmpeg=dir set ffmpeg home directory + --without-crypt disable support for libcrypt + --without-crypto disable support for openssl libcrypto + --without-ssl disable support for openssl libssl + --with-ssl=DIR use openssl include/library files in DIR + --with-x use the X Window System + --with-system-libvncserver use installed libvncserver for x11vnc + --with-system-libvncserver=DIR use libvncserver installed in DIR for x11vnc + --with-x11vnc configure for building the x11vnc subdir (if present) + you will need to cd to x11vnc and run 'make' etc. + --without-xkeyboard disable xkeyboard extension support + --without-xinerama disable xinerama extension support + --without-xrandr disable xrandr extension support + --without-xfixes disable xfixes extension support + --without-xdamage disable xdamage extension support + --without-xtrap disable xtrap extension support + --without-xrecord disable xrecord extension support + --without-fbpm disable fbpm extension support + --without-dpms disable dpms extension support + --without-v4l disable video4linux support + --without-fbdev disable linux fb device support + --without-uinput disable linux uinput device support + --without-macosx-native disable MacOS X native display support + --without-avahi disable support for Avahi/mDNS + --with-avahi=DIR use avahi include/library files in DIR + --without-jpeg disable support for jpeg + --with-jpeg=DIR use jpeg include/library files in DIR + --without-png disable support for png + --with-png=DIR use png include/library files in DIR + --without-libz disable support for deflate + --without-zlib disable support for deflate + --with-zlib=DIR use zlib include/library files in DIR + --without-pthread disable support for libpthread + --with-sdl-config=FILE + Use the given path to sdl-config when determining + SDL configuration; defaults to "sdl-config" + --without-gcrypt disable support for gcrypt + --without-client-gcrypt disable support for gcrypt in libvncclient + --with-libgcrypt-prefix=PFX + prefix where LIBGCRYPT is installed (optional) + --without-gnutls disable support for gnutls + --with-gnutls=DIR use gnutls include/library files in DIR + --without-ipv6 disable IPv6 support + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + CXX C++ compiler command + CXXFLAGS C++ compiler flags + CXXCPP C++ preprocessor + F77 Fortran 77 compiler command + FFLAGS Fortran 77 compiler flags + XMKMF Path to xmkmf, Makefile generator for X Window System + JPEG_LDFLAGS + Linker flags to use when linking with libjpeg, e.g. + -L/foo/dir/lib -Wl,-static -ljpeg -Wl,-shared. This overrides + the linker flags set by --with-jpeg. + PKG_CONFIG path to pkg-config utility + PKG_CONFIG_PATH + directories to add to pkg-config's search path + PKG_CONFIG_LIBDIR + path overriding pkg-config's built-in search path + GTK_CFLAGS C compiler flags for GTK, overriding pkg-config + GTK_LIBS linker flags for GTK, overriding pkg-config + GNUTLS_CFLAGS + C compiler flags for GNUTLS, overriding pkg-config + GNUTLS_LIBS linker flags for GNUTLS, overriding pkg-config + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +LibVNCServer configure 0.9.9 +generated by GNU Autoconf 2.67 + +Copyright (C) 2010 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval "test \"\${$3+set}\"" = set; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval "test \"\${$3+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( $as_echo "## ----------------------------------------------------------- ## +## Report this to http://sourceforge.net/projects/libvncserver ## +## ----------------------------------------------------------- ##" + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval "test \"\${$3+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval "test \"\${$3+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_header_compile + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval "test \"\${$3+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_func + +# ac_fn_cxx_try_compile LINENO +# ---------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_compile + +# ac_fn_cxx_try_cpp LINENO +# ------------------------ +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_cpp + +# ac_fn_cxx_try_link LINENO +# ------------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_link + +# ac_fn_f77_try_compile LINENO +# ---------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_f77_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_f77_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_f77_try_compile + +# ac_fn_f77_try_link LINENO +# ------------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_f77_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_f77_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_f77_try_link + +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval "test \"\${$3+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_type +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by LibVNCServer $as_me 0.9.9, which was +generated by GNU Autoconf 2.67. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5 ; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +am__api_version='1.11' + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken +alias in your environment" "$LINENO" 5 + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AWK+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE=LibVNCServer + VERSION=0.9.9 + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in +yes) AM_DEFAULT_VERBOSITY=0;; +no) AM_DEFAULT_VERBOSITY=1;; +*) AM_DEFAULT_VERBOSITY=0;; +esac +AM_BACKSLASH='\' + +ac_config_headers="$ac_config_headers rfbconfig.h" + +ac_config_headers="$ac_config_headers " + + +ac_config_commands="$ac_config_commands rfb/rfbconfig.h" + + +# Checks for programs. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5 ; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5 ; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5 ; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5 ; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if test "${ac_cv_objext+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5 ; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if test "${ac_cv_c_compiler_gnu+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if test "${ac_cv_prog_cc_g+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +if test "x$CC" != xcc; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5 +$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5 +$as_echo_n "checking whether cc understands -c and -o together... " >&6; } +fi +set dummy $CC; ac_cc=`$as_echo "$2" | + sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +# Make sure it works both with $CC and with simple cc. +# We do the test twice because some compilers refuse to overwrite an +# existing .o file with -o, though they will create one. +ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' +rm -f conftest2.* +if { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && + test -f conftest2.$ac_objext && { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; +then + eval ac_cv_prog_cc_${ac_cc}_c_o=yes + if test "x$CC" != xcc; then + # Test first that cc exists at all. + if { ac_try='cc -c conftest.$ac_ext >&5' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' + rm -f conftest2.* + if { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && + test -f conftest2.$ac_objext && { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; + then + # cc works too. + : + else + # cc exists but doesn't like -o. + eval ac_cv_prog_cc_${ac_cc}_c_o=no + fi + fi + fi +else + eval ac_cv_prog_cc_${ac_cc}_c_o=no +fi +rm -f core conftest* + +fi +if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h + +fi + +# FIXME: we rely on the cache variable name because +# there is no other way. +set dummy $CC +am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o +if test "$am_t" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi + + +if test -z "$CC"; then + CCLD="\$(CC)" +else + CCLD="$CC" +fi +test "x$GCC" = "xyes" && CFLAGS="$CFLAGS -Wall" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + + + +# Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi + + +# Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi + + +# Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if test "${ac_cv_build+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if test "${ac_cv_host+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if test "${lt_cv_path_SED+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + # Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done + +fi + +SED=$lt_cv_path_SED +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $SED" >&5 +$as_echo "$SED" >&6; } + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if test "${ac_cv_path_GREP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if test "${lt_cv_path_LD+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if test "${lt_cv_prog_gnu_ld+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if test "${lt_cv_ld_reload_flag+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD-compatible nm" >&5 +$as_echo_n "checking for BSD-compatible nm... " >&6; } +if test "${lt_cv_path_NM+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +NM="$lt_cv_path_NM" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognise dependent libraries" >&5 +$as_echo_n "checking how to recognise dependent libraries... " >&6; } +if test "${lt_cv_deplibs_check_method+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump'. + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | kfreebsd*-gnu | dragonfly*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix3*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line 5187 "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if test "${lt_cv_cc_needs_belf+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) LD="${LD-ld} -64" ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-cygwin* | *-*-mingw* | *-*-pw32*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_DLLTOOL+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AS+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AS="${ac_tool_prefix}as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 +$as_echo "$AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_AS+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AS="as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 +$as_echo "$ac_ct_AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OBJDUMP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + + ;; + +esac + +need_locks="$enable_libtool_lock" + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5 ; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if test "${ac_cv_header_stdc+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default" +if test "x$ac_cv_header_dlfcn_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +if test -z "$CXX"; then + if test -n "$CCC"; then + CXX=$CCC + else + if test -n "$ac_tool_prefix"; then + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CXX+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CXX"; then + ac_cv_prog_CXX="$CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CXX=$ac_cv_prog_CXX +if test -n "$CXX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 +$as_echo "$CXX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CXX" && break + done +fi +if test -z "$CXX"; then + ac_ct_CXX=$CXX + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CXX"; then + ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CXX="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CXX=$ac_cv_prog_ac_ct_CXX +if test -n "$ac_ct_CXX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 +$as_echo "$ac_ct_CXX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CXX" && break +done + + if test "x$ac_ct_CXX" = x; then + CXX="g++" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CXX=$ac_ct_CXX + fi +fi + + fi +fi +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 +$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } +if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 +$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GXX=yes +else + GXX= +fi +ac_test_CXXFLAGS=${CXXFLAGS+set} +ac_save_CXXFLAGS=$CXXFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 +$as_echo_n "checking whether $CXX accepts -g... " >&6; } +if test "${ac_cv_prog_cxx_g+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_save_cxx_werror_flag=$ac_cxx_werror_flag + ac_cxx_werror_flag=yes + ac_cv_prog_cxx_g=no + CXXFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_prog_cxx_g=yes +else + CXXFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + +else + ac_cxx_werror_flag=$ac_save_cxx_werror_flag + CXXFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_prog_cxx_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cxx_werror_flag=$ac_save_cxx_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 +$as_echo "$ac_cv_prog_cxx_g" >&6; } +if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS=$ac_save_CXXFLAGS +elif test $ac_cv_prog_cxx_g = yes; then + if test "$GXX" = yes; then + CXXFLAGS="-g -O2" + else + CXXFLAGS="-g" + fi +else + if test "$GXX" = yes; then + CXXFLAGS="-O2" + else + CXXFLAGS= + fi +fi +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +depcc="$CXX" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CXX_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CXX_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CXX_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } +CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then + am__fastdepCXX_TRUE= + am__fastdepCXX_FALSE='#' +else + am__fastdepCXX_TRUE='#' + am__fastdepCXX_FALSE= +fi + + + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 +$as_echo_n "checking how to run the C++ preprocessor... " >&6; } +if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CXXCPP=$CXXCPP + +fi + CXXCPP=$ac_cv_prog_CXXCPP +else + ac_cv_prog_CXXCPP=$CXXCPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 +$as_echo "$CXXCPP" >&6; } +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5 ; } +fi + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +fi + + +ac_ext=f +ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_f77_compiler_gnu +if test -n "$ac_tool_prefix"; then + for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_F77+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$F77"; then + ac_cv_prog_F77="$F77" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_F77="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +F77=$ac_cv_prog_F77 +if test -n "$F77"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $F77" >&5 +$as_echo "$F77" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$F77" && break + done +fi +if test -z "$F77"; then + ac_ct_F77=$F77 + for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_F77+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_F77"; then + ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_F77="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_F77=$ac_cv_prog_ac_ct_F77 +if test -n "$ac_ct_F77"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_F77" >&5 +$as_echo "$ac_ct_F77" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_F77" && break +done + + if test "x$ac_ct_F77" = x; then + F77="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + F77=$ac_ct_F77 + fi +fi + + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran 77 compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done +rm -f a.out + +# If we don't use `.F' as extension, the preprocessor is not run on the +# input file. (Note that this only needs to work for GNU compilers.) +ac_save_ext=$ac_ext +ac_ext=F +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran 77 compiler" >&5 +$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; } +if test "${ac_cv_f77_compiler_gnu+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat > conftest.$ac_ext <<_ACEOF + program main +#ifndef __GNUC__ + choke me +#endif + + end +_ACEOF +if ac_fn_f77_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_f77_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_f77_compiler_gnu" >&5 +$as_echo "$ac_cv_f77_compiler_gnu" >&6; } +ac_ext=$ac_save_ext +ac_test_FFLAGS=${FFLAGS+set} +ac_save_FFLAGS=$FFLAGS +FFLAGS= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $F77 accepts -g" >&5 +$as_echo_n "checking whether $F77 accepts -g... " >&6; } +if test "${ac_cv_prog_f77_g+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + FFLAGS=-g +cat > conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +if ac_fn_f77_try_compile "$LINENO"; then : + ac_cv_prog_f77_g=yes +else + ac_cv_prog_f77_g=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_f77_g" >&5 +$as_echo "$ac_cv_prog_f77_g" >&6; } +if test "$ac_test_FFLAGS" = set; then + FFLAGS=$ac_save_FFLAGS +elif test $ac_cv_prog_f77_g = yes; then + if test "x$ac_cv_f77_compiler_gnu" = xyes; then + FFLAGS="-g -O2" + else + FFLAGS="-g" + fi +else + if test "x$ac_cv_f77_compiler_gnu" = xyes; then + FFLAGS="-O2" + else + FFLAGS= + fi +fi + +if test $ac_compiler_gnu = yes; then + G77=yes +else + G77= +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if test "${lt_cv_sys_max_cmd_len+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + teststring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi + + + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32*) + symcode='[ABCDGISTW]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if test "${lt_cv_objdir+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e 1s/^X//' +sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AR+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +else + AR="$ac_cv_prog_AR" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_RANLIB+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +enable_dlopen=no +enable_win32_dll=yes + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; pic_mode="$withval" +else + pic_mode=default +fi + +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7593: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:7597: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + +lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic='-qnocommon' + lt_prog_compiler_wl='-Wl,' + ;; + esac + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + linux*) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 +$as_echo "$lt_prog_compiler_pic" >&6; } + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if test "${lt_prog_compiler_pic_works+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7861: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:7865: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_pic_works=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_works" >&5 +$as_echo "$lt_prog_compiler_pic_works" >&6; } + +if test x"$lt_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_prog_compiler_static_works+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_static_works=yes + fi + else + lt_prog_compiler_static_works=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_static_works" >&5 +$as_echo "$lt_prog_compiler_static_works" >&6; } + +if test x"$lt_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7965: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:7969: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + enable_shared_with_static_runtimes=no + archive_cmds= + archive_expsym_cmds= + old_archive_From_new_cmds= + old_archive_from_expsyms_cmds= + export_dynamic_flag_spec= + whole_archive_flag_spec= + thread_safe_flag_spec= + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_libdir_separator= + hardcode_direct=no + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + link_all_deplibs=unknown + hardcode_automatic=no + module_cmds= + module_expsym_cmds= + always_export_symbols=no + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + interix3*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes + ;; + + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + whole_archive_flag_spec='' + link_all_deplibs=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs=no + ;; + esac + fi + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + hardcode_direct=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_libdir_flag_spec_ld='+b $libdir' + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld='-rpath $libdir' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + openbsd*) + hardcode_direct=yes + hardcode_shlibpath_var=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z text' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + *) + whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + archive_cmds_need_lc=no + else + archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 +$as_echo "$archive_cmds_need_lc" >&6; } + ;; + esac + fi + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + freebsd*) # from 4.6 on + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix3*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var" || \ + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = x""yes; then : + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if test "${ac_cv_lib_dld_shl_load+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = x""yes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if test "${ac_cv_lib_svld_dlopen+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if test "${ac_cv_lib_dld_dld_link+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = x""yes; then : + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + exit (status); +} +EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self_static+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + exit (status); +} +EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + +# Report which library types will actually be built +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case $host_os in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler \ + CC \ + LD \ + lt_prog_compiler_wl \ + lt_prog_compiler_pic \ + lt_prog_compiler_static \ + lt_prog_compiler_no_builtin_flag \ + export_dynamic_flag_spec \ + thread_safe_flag_spec \ + whole_archive_flag_spec \ + enable_shared_with_static_runtimes \ + old_archive_cmds \ + old_archive_from_new_cmds \ + predep_objects \ + postdep_objects \ + predeps \ + postdeps \ + compiler_lib_search_path \ + archive_cmds \ + archive_expsym_cmds \ + postinstall_cmds \ + postuninstall_cmds \ + old_archive_from_expsyms_cmds \ + allow_undefined_flag \ + no_undefined_flag \ + export_symbols_cmds \ + hardcode_libdir_flag_spec \ + hardcode_libdir_flag_spec_ld \ + hardcode_libdir_separator \ + hardcode_automatic \ + module_cmds \ + module_expsym_cmds \ + lt_cv_prog_compiler_c_o \ + exclude_expsyms \ + include_expsyms; do + + case $var in + old_archive_cmds | \ + old_archive_from_new_cmds | \ + archive_cmds | \ + archive_expsym_cmds | \ + module_cmds | \ + module_expsym_cmds | \ + old_archive_from_expsyms_cmds | \ + export_symbols_cmds | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="${ofile}T" + trap "$rm \"$cfgfile\"; exit 1" 1 2 15 + $rm -f "$cfgfile" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ofile" >&5 +$as_echo "$as_me: creating $ofile" >&6;} + + cat <<__EOF__ >> "$cfgfile" +#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e 1s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + +# A language-specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU C compiler? +with_gcc=$GCC + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# ### END LIBTOOL CONFIG + +__EOF__ + + + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + +# Check whether --with-tags was given. +if test "${with_tags+set}" = set; then : + withval=$with_tags; tagnames="$withval" +fi + + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: output file \`$ofile' does not exist" >&5 +$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: output file \`$ofile' does not look like a libtool script" >&5 +$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} + else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 +$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} + fi + fi + if test -z "$LTCFLAGS"; then + eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in + "") ;; + *) as_fn_error $? "invalid tag name: $tagname" "$LINENO" 5 + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + as_fn_error $? "tag name \"$tagname\" already exists" "$LINENO" 5 + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + + +archive_cmds_need_lc_CXX=no +allow_undefined_flag_CXX= +always_export_symbols_CXX=no +archive_expsym_cmds_CXX= +export_dynamic_flag_spec_CXX= +hardcode_direct_CXX=no +hardcode_libdir_flag_spec_CXX= +hardcode_libdir_flag_spec_ld_CXX= +hardcode_libdir_separator_CXX= +hardcode_minus_L_CXX=no +hardcode_shlibpath_var_CXX=unsupported +hardcode_automatic_CXX=no +module_cmds_CXX= +module_expsym_cmds_CXX= +link_all_deplibs_CXX=unknown +old_archive_cmds_CXX=$old_archive_cmds +no_undefined_flag_CXX= +whole_archive_flag_spec_CXX= +enable_shared_with_static_runtimes_CXX=no + +# Dependencies to place before and after the object being linked: +predep_objects_CXX= +postdep_objects_CXX= +predeps_CXX= +postdeps_CXX= +compiler_lib_search_path_CXX= + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +objext_CXX=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + $as_unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + $as_unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +compiler_CXX=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' +else + lt_prog_compiler_no_builtin_flag_CXX= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if test "${lt_cv_path_LD+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if test "${lt_cv_prog_gnu_ld+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_CXX= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } +ld_shlibs_CXX=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_CXX='' + hardcode_direct_CXX=yes + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct_CXX=yes + else + # We have old collect2 + hardcode_direct_CXX=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_CXX=yes + hardcode_libdir_flag_spec_CXX='-L$libdir' + hardcode_libdir_separator_CXX= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_CXX=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_CXX='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + + archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_CXX="-z nodefs" + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_CXX=' ${wl}-bernotok' + allow_undefined_flag_CXX=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_CXX='$convenience' + archive_cmds_need_lc_CXX=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_CXX=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_CXX=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_CXX='-L$libdir' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=no + enable_shared_with_static_runtimes_CXX=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_CXX=no + fi + ;; + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc_CXX=no + hardcode_direct_CXX=no + hardcode_automatic_CXX=yes + hardcode_shlibpath_var_CXX=unsupported + whole_archive_flag_spec_CXX='' + link_all_deplibs_CXX=yes + + if test "$GXX" = yes ; then + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_CXX=no + ;; + esac + fi + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + freebsd[12]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + ld_shlibs_CXX=no + ;; + freebsd-elf*) + archive_cmds_need_lc_CXX=no + ;; + freebsd* | kfreebsd*-gnu | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + ld_shlibs_CXX=yes + ;; + gnu*) + ;; + hpux9*) + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + export_dynamic_flag_spec_CXX='${wl}-E' + hardcode_direct_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC*) + archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_libdir_flag_spec_ld_CXX='+b $libdir' + ;; + *) + export_dynamic_flag_spec_CXX='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + ;; + *) + hardcode_direct_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + interix3*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + link_all_deplibs_CXX=yes + ;; + esac + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + ;; + linux*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc*) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + archive_cmds_need_lc_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC*) + # Portland Group C++ compiler + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + m88k*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + openbsd2*) + # C++ shared libraries are fairly broken + ld_shlibs_CXX=no + ;; + openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + export_dynamic_flag_spec_CXX='${wl}-E' + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + ;; + osf3*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_separator_CXX=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + cxx*) + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_separator_CXX=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + cxx*) + allow_undefined_flag_CXX=' -expect_unresolved \*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ + $rm $lib.exp' + + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + archive_cmds_need_lc_CXX=yes + no_undefined_flag_CXX=' -zdefs' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_shlibpath_var_CXX=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. We must also pass each convience library through + # to the system linker between allextract/defaultextract. + # The C++ compiler will combine linker options so we + # cannot just pass the convience library names through + # without $wl. + # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' + ;; + esac + link_all_deplibs_CXX=yes + + output_verbose_link_cmd='echo' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + no_undefined_flag_CXX=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag_CXX='${wl}-z,text' + archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + # So that behaviour is only enabled if SCOABSPATH is set to a + # non-empty value in the environment. Most likely only useful for + # creating official distributions of packages. + # This is a hack until libtool officially supports absolute path + # names for shared libraries. + no_undefined_flag_CXX='${wl}-z,text' + allow_undefined_flag_CXX='${wl}-z,nodefs' + archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + export_dynamic_flag_spec_CXX='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 +$as_echo "$ld_shlibs_CXX" >&6; } +test "$ld_shlibs_CXX" = no && can_build_shared=no + +GCC_CXX="$GXX" +LD_CXX="$LD" + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... + +cat > conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + # The `*' in the case matches for architectures that use `case' in + # $output_verbose_cmd can trigger glob expansion during the loop + # eval without this substitution. + output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` + + for p in `eval $output_verbose_link_cmd`; do + case $p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" \ + || test $p = "-R"; then + prev=$p + continue + else + prev= + fi + + if test "$pre_test_object_deps_done" = no; then + case $p in + -L* | -R*) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$compiler_lib_search_path_CXX"; then + compiler_lib_search_path_CXX="${prev}${p}" + else + compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$postdeps_CXX"; then + postdeps_CXX="${prev}${p}" + else + postdeps_CXX="${postdeps_CXX} ${prev}${p}" + fi + fi + ;; + + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$predep_objects_CXX"; then + predep_objects_CXX="$p" + else + predep_objects_CXX="$predep_objects_CXX $p" + fi + else + if test -z "$postdep_objects_CXX"; then + postdep_objects_CXX="$p" + else + postdep_objects_CXX="$postdep_objects_CXX $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling CXX test program" +fi + +$rm -f confest.$objext + +# PORTME: override above test on systems where it is broken +case $host_os in +interix3*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + predep_objects_CXX= + postdep_objects_CXX= + postdeps_CXX= + ;; + +solaris*) + case $cc_basename in + CC*) + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + postdeps_CXX='-lCstd -lCrun' + ;; + esac + ;; +esac + + +case " $postdeps_CXX " in +*" -lc "*) archive_cmds_need_lc_CXX=no ;; +esac + +lt_prog_compiler_wl_CXX= +lt_prog_compiler_pic_CXX= +lt_prog_compiler_static_CXX= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_CXX='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + lt_prog_compiler_pic_CXX= + ;; + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_CXX=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + else + lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic_CXX='-qnocommon' + lt_prog_compiler_wl_CXX='-Wl,' + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++*) + lt_prog_compiler_pic_CXX='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | kfreebsd*-gnu | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + lt_prog_compiler_pic_CXX='+Z' + fi + ;; + aCC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_CXX='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC*) + # KAI C++ Compiler + lt_prog_compiler_wl_CXX='--backend -Wl,' + lt_prog_compiler_pic_CXX='-fPIC' + ;; + icpc* | ecpc*) + # Intel C++ + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-static' + ;; + pgCC*) + # Portland Group C++ compiler. + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-fpic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + lt_prog_compiler_pic_CXX='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + lt_prog_compiler_wl_CXX='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + lt_prog_compiler_pic_CXX='-pic' + ;; + cxx*) + # Digital/Compaq C++ + lt_prog_compiler_wl_CXX='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + lt_prog_compiler_pic_CXX='-pic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + lcc*) + # Lucid + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + lt_prog_compiler_pic_CXX='-KPIC' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + esac + ;; + vxworks*) + ;; + *) + lt_prog_compiler_can_build_shared_CXX=no + ;; + esac + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5 +$as_echo "$lt_prog_compiler_pic_CXX" >&6; } + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_CXX"; then + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } +if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_prog_compiler_pic_works_CXX=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:12314: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:12318: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_pic_works_CXX=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_works_CXX" >&5 +$as_echo "$lt_prog_compiler_pic_works_CXX" >&6; } + +if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then + case $lt_prog_compiler_pic_CXX in + "" | " "*) ;; + *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; + esac +else + lt_prog_compiler_pic_CXX= + lt_prog_compiler_can_build_shared_CXX=no +fi + +fi +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_CXX= + ;; + *) + lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" + ;; +esac + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_prog_compiler_static_works_CXX+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_prog_compiler_static_works_CXX=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_static_works_CXX=yes + fi + else + lt_prog_compiler_static_works_CXX=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_static_works_CXX" >&5 +$as_echo "$lt_prog_compiler_static_works_CXX" >&6; } + +if test x"$lt_prog_compiler_static_works_CXX" = xyes; then + : +else + lt_prog_compiler_static_CXX= +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_CXX=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:12418: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:12422: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_CXX=yes + fi + fi + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + export_symbols_cmds_CXX="$ltdll_cmds" + ;; + cygwin* | mingw*) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 +$as_echo "$ld_shlibs_CXX" >&6; } +test "$ld_shlibs_CXX" = no && can_build_shared=no + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_CXX" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_CXX=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_CXX in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_CXX + pic_flag=$lt_prog_compiler_pic_CXX + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_CXX + allow_undefined_flag_CXX= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + archive_cmds_need_lc_CXX=no + else + archive_cmds_need_lc_CXX=yes + fi + allow_undefined_flag_CXX=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_CXX" >&5 +$as_echo "$archive_cmds_need_lc_CXX" >&6; } + ;; + esac + fi + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + freebsd*) # from 4.6 on + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix3*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action_CXX= +if test -n "$hardcode_libdir_flag_spec_CXX" || \ + test -n "$runpath_var_CXX" || \ + test "X$hardcode_automatic_CXX" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_CXX" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && + test "$hardcode_minus_L_CXX" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_CXX=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_CXX=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_CXX=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 +$as_echo "$hardcode_action_CXX" >&6; } + +if test "$hardcode_action_CXX" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_CXX \ + CC_CXX \ + LD_CXX \ + lt_prog_compiler_wl_CXX \ + lt_prog_compiler_pic_CXX \ + lt_prog_compiler_static_CXX \ + lt_prog_compiler_no_builtin_flag_CXX \ + export_dynamic_flag_spec_CXX \ + thread_safe_flag_spec_CXX \ + whole_archive_flag_spec_CXX \ + enable_shared_with_static_runtimes_CXX \ + old_archive_cmds_CXX \ + old_archive_from_new_cmds_CXX \ + predep_objects_CXX \ + postdep_objects_CXX \ + predeps_CXX \ + postdeps_CXX \ + compiler_lib_search_path_CXX \ + archive_cmds_CXX \ + archive_expsym_cmds_CXX \ + postinstall_cmds_CXX \ + postuninstall_cmds_CXX \ + old_archive_from_expsyms_cmds_CXX \ + allow_undefined_flag_CXX \ + no_undefined_flag_CXX \ + export_symbols_cmds_CXX \ + hardcode_libdir_flag_spec_CXX \ + hardcode_libdir_flag_spec_ld_CXX \ + hardcode_libdir_separator_CXX \ + hardcode_automatic_CXX \ + module_cmds_CXX \ + module_expsym_cmds_CXX \ + lt_cv_prog_compiler_c_o_CXX \ + exclude_expsyms_CXX \ + include_expsyms_CXX; do + + case $var in + old_archive_cmds_CXX | \ + old_archive_from_new_cmds_CXX | \ + archive_cmds_CXX | \ + archive_expsym_cmds_CXX | \ + module_cmds_CXX | \ + module_expsym_cmds_CXX | \ + old_archive_from_expsyms_cmds_CXX | \ + export_symbols_cmds_CXX | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_CXX + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + +# A language-specific compiler. +CC=$lt_compiler_CXX + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_CXX + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_CXX + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_CXX + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_CXX +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_CXX + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_CXX +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_CXX +archive_expsym_cmds=$lt_archive_expsym_cmds_CXX +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_CXX +module_expsym_cmds=$lt_module_expsym_cmds_CXX + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_CXX + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_CXX + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_CXX + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_CXX + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_CXX + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_CXX + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_CXX + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_CXX + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_CXX + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_CXX + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_CXX + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_CXX + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path_CXX" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_CXX + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_CXX + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_CXX + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_CXX + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld + + else + tagname="" + fi + ;; + + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + +ac_ext=f +ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_f77_compiler_gnu + + +archive_cmds_need_lc_F77=no +allow_undefined_flag_F77= +always_export_symbols_F77=no +archive_expsym_cmds_F77= +export_dynamic_flag_spec_F77= +hardcode_direct_F77=no +hardcode_libdir_flag_spec_F77= +hardcode_libdir_flag_spec_ld_F77= +hardcode_libdir_separator_F77= +hardcode_minus_L_F77=no +hardcode_automatic_F77=no +module_cmds_F77= +module_expsym_cmds_F77= +link_all_deplibs_F77=unknown +old_archive_cmds_F77=$old_archive_cmds +no_undefined_flag_F77= +whole_archive_flag_spec_F77= +enable_shared_with_static_runtimes_F77=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +objext_F77=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code=" subroutine t\n return\n end\n" + +# Code to be used in simple link tests +lt_simple_link_test_code=" program t\n end\n" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${F77-"f77"} +compiler=$CC +compiler_F77=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case $host_os in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; +aix4* | aix5*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + +GCC_F77="$G77" +LD_F77="$LD" + +lt_prog_compiler_wl_F77= +lt_prog_compiler_pic_F77= +lt_prog_compiler_static_F77= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_static_F77='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_F77='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_F77='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_F77='-fno-common' + ;; + + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared_F77=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_F77=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_F77='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic_F77='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl_F77='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_F77='-Bstatic' + else + lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic_F77='-qnocommon' + lt_prog_compiler_wl_F77='-Wl,' + ;; + esac + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_F77='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl_F77='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_F77='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static_F77='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl_F77='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static_F77='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + linux*) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-fpic' + lt_prog_compiler_static_F77='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl_F77='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static_F77='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl_F77='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static_F77='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl_F77='-Qoption ld ';; + *) + lt_prog_compiler_wl_F77='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl_F77='-Qoption ld ' + lt_prog_compiler_pic_F77='-PIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic_F77='-Kconform_pic' + lt_prog_compiler_static_F77='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_can_build_shared_F77=no + ;; + + uts4*) + lt_prog_compiler_pic_F77='-pic' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared_F77=no + ;; + esac + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_F77" >&5 +$as_echo "$lt_prog_compiler_pic_F77" >&6; } + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_F77"; then + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; } +if test "${lt_prog_compiler_pic_works_F77+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_prog_compiler_pic_works_F77=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_F77" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:13988: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:13992: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_pic_works_F77=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_works_F77" >&5 +$as_echo "$lt_prog_compiler_pic_works_F77" >&6; } + +if test x"$lt_prog_compiler_pic_works_F77" = xyes; then + case $lt_prog_compiler_pic_F77 in + "" | " "*) ;; + *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; + esac +else + lt_prog_compiler_pic_F77= + lt_prog_compiler_can_build_shared_F77=no +fi + +fi +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_F77= + ;; + *) + lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" + ;; +esac + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_prog_compiler_static_works_F77+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_prog_compiler_static_works_F77=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_static_works_F77=yes + fi + else + lt_prog_compiler_static_works_F77=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_static_works_F77" >&5 +$as_echo "$lt_prog_compiler_static_works_F77" >&6; } + +if test x"$lt_prog_compiler_static_works_F77" = xyes; then + : +else + lt_prog_compiler_static_F77= +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_F77=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:14092: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:14096: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_F77=yes + fi + fi + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_F77" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; } + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag_F77= + enable_shared_with_static_runtimes_F77=no + archive_cmds_F77= + archive_expsym_cmds_F77= + old_archive_From_new_cmds_F77= + old_archive_from_expsyms_cmds_F77= + export_dynamic_flag_spec_F77= + whole_archive_flag_spec_F77= + thread_safe_flag_spec_F77= + hardcode_libdir_flag_spec_F77= + hardcode_libdir_flag_spec_ld_F77= + hardcode_libdir_separator_F77= + hardcode_direct_F77=no + hardcode_minus_L_F77=no + hardcode_shlibpath_var_F77=unsupported + link_all_deplibs_F77=unknown + hardcode_automatic_F77=no + module_cmds_F77= + module_expsym_cmds_F77= + always_export_symbols_F77=no + export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms_F77= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs_F77=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_F77='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_F77= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs_F77=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs_F77=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_F77=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_F77=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_F77='-L$libdir' + allow_undefined_flag_F77=unsupported + always_export_symbols_F77=no + enable_shared_with_static_runtimes_F77=yes + export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_F77=no + fi + ;; + + interix3*) + hardcode_direct_F77=no + hardcode_shlibpath_var_F77=no + hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' + export_dynamic_flag_spec_F77='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + else + ld_shlibs_F77=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs_F77=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_F77=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs_F77=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + ld_shlibs_F77=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_F77=no + fi + ;; + esac + + if test "$ld_shlibs_F77" = no; then + runpath_var= + hardcode_libdir_flag_spec_F77= + export_dynamic_flag_spec_F77= + whole_archive_flag_spec_F77= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag_F77=unsupported + always_export_symbols_F77=yes + archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L_F77=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct_F77=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_F77='' + hardcode_direct_F77=yes + hardcode_libdir_separator_F77=':' + link_all_deplibs_F77=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct_F77=yes + else + # We have old collect2 + hardcode_direct_F77=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_F77=yes + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_libdir_separator_F77= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_F77=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_F77='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat > conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +if ac_fn_f77_try_link "$LINENO"; then : + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_F77="-z nodefs" + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat > conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +if ac_fn_f77_try_link "$LINENO"; then : + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_F77=' ${wl}-bernotok' + allow_undefined_flag_F77=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_F77='$convenience' + archive_cmds_need_lc_F77=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + # see comment about different semantics on the GNU ld section + ld_shlibs_F77=no + ;; + + bsdi[45]*) + export_dynamic_flag_spec_F77=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec_F77=' ' + allow_undefined_flag_F77=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds_F77='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path_F77='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes_F77=yes + ;; + + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc_F77=no + hardcode_direct_F77=no + hardcode_automatic_F77=yes + hardcode_shlibpath_var_F77=unsupported + whole_archive_flag_spec_F77='' + link_all_deplibs_F77=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_F77=no + ;; + esac + fi + ;; + + dgux*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_shlibpath_var_F77=no + ;; + + freebsd1*) + ld_shlibs_F77=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes + hardcode_minus_L_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu | dragonfly*) + archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + hardcode_direct_F77=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + + hardcode_direct_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_libdir_flag_spec_ld_F77='+b $libdir' + hardcode_direct_F77=no + hardcode_shlibpath_var_F77=no + ;; + *) + hardcode_direct_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' + fi + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + link_all_deplibs_F77=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + newsos6) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + hardcode_shlibpath_var_F77=no + ;; + + openbsd*) + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' + export_dynamic_flag_spec_F77='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + ;; + *) + archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + allow_undefined_flag_F77=unsupported + archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag_F77=' -expect_unresolved \*' + archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag_F77=' -expect_unresolved \*' + archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec_F77='-rpath $libdir' + fi + hardcode_libdir_separator_F77=: + ;; + + solaris*) + no_undefined_flag_F77=' -z text' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + wlarc='' + archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_shlibpath_var_F77=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; + *) + whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; + esac + link_all_deplibs_F77=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_direct_F77=yes + hardcode_minus_L_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds_F77='$CC -r -o $output$reload_objs' + hardcode_direct_F77=no + ;; + motorola) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_F77=no + ;; + + sysv4.3*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_F77=no + export_dynamic_flag_spec_F77='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_F77=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs_F77=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) + no_undefined_flag_F77='${wl}-z,text' + archive_cmds_need_lc_F77=no + hardcode_shlibpath_var_F77=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag_F77='${wl}-z,text' + allow_undefined_flag_F77='${wl}-z,nodefs' + archive_cmds_need_lc_F77=no + hardcode_shlibpath_var_F77=no + hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator_F77=':' + link_all_deplibs_F77=yes + export_dynamic_flag_spec_F77='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_shlibpath_var_F77=no + ;; + + *) + ld_shlibs_F77=no + ;; + esac + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_F77" >&5 +$as_echo "$ld_shlibs_F77" >&6; } +test "$ld_shlibs_F77" = no && can_build_shared=no + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_F77" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_F77=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_F77 in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_F77 + pic_flag=$lt_prog_compiler_pic_F77 + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_F77 + allow_undefined_flag_F77= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + archive_cmds_need_lc_F77=no + else + archive_cmds_need_lc_F77=yes + fi + allow_undefined_flag_F77=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_F77" >&5 +$as_echo "$archive_cmds_need_lc_F77" >&6; } + ;; + esac + fi + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + freebsd*) # from 4.6 on + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix3*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action_F77= +if test -n "$hardcode_libdir_flag_spec_F77" || \ + test -n "$runpath_var_F77" || \ + test "X$hardcode_automatic_F77" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_F77" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && + test "$hardcode_minus_L_F77" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_F77=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_F77=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_F77=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_F77" >&5 +$as_echo "$hardcode_action_F77" >&6; } + +if test "$hardcode_action_F77" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_F77 \ + CC_F77 \ + LD_F77 \ + lt_prog_compiler_wl_F77 \ + lt_prog_compiler_pic_F77 \ + lt_prog_compiler_static_F77 \ + lt_prog_compiler_no_builtin_flag_F77 \ + export_dynamic_flag_spec_F77 \ + thread_safe_flag_spec_F77 \ + whole_archive_flag_spec_F77 \ + enable_shared_with_static_runtimes_F77 \ + old_archive_cmds_F77 \ + old_archive_from_new_cmds_F77 \ + predep_objects_F77 \ + postdep_objects_F77 \ + predeps_F77 \ + postdeps_F77 \ + compiler_lib_search_path_F77 \ + archive_cmds_F77 \ + archive_expsym_cmds_F77 \ + postinstall_cmds_F77 \ + postuninstall_cmds_F77 \ + old_archive_from_expsyms_cmds_F77 \ + allow_undefined_flag_F77 \ + no_undefined_flag_F77 \ + export_symbols_cmds_F77 \ + hardcode_libdir_flag_spec_F77 \ + hardcode_libdir_flag_spec_ld_F77 \ + hardcode_libdir_separator_F77 \ + hardcode_automatic_F77 \ + module_cmds_F77 \ + module_expsym_cmds_F77 \ + lt_cv_prog_compiler_c_o_F77 \ + exclude_expsyms_F77 \ + include_expsyms_F77; do + + case $var in + old_archive_cmds_F77 | \ + old_archive_from_new_cmds_F77 | \ + archive_cmds_F77 | \ + archive_expsym_cmds_F77 | \ + module_cmds_F77 | \ + module_expsym_cmds_F77 | \ + old_archive_from_expsyms_cmds_F77 | \ + export_symbols_cmds_F77 | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_F77 + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + +# A language-specific compiler. +CC=$lt_compiler_F77 + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_F77 + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_F77 + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_F77 + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_F77 +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_F77 + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_F77 +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_F77 +archive_expsym_cmds=$lt_archive_expsym_cmds_F77 +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_F77 +module_expsym_cmds=$lt_module_expsym_cmds_F77 + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_F77 + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_F77 + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_F77 + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_F77 + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_F77 + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_F77 + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_F77 + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_F77 + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_F77 + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_F77 + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_F77 + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_F77 + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path_F77" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_F77 + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_F77 + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_F77 + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_F77 + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + else + tagname="" + fi + ;; + + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +objext_GCJ=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${GCJ-"gcj"} +compiler=$CC +compiler_GCJ=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +archive_cmds_need_lc_GCJ=no + +old_archive_cmds_GCJ=$old_archive_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... + +lt_prog_compiler_no_builtin_flag_GCJ= + +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:16248: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:16252: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" +else + : +fi + +fi + +lt_prog_compiler_wl_GCJ= +lt_prog_compiler_pic_GCJ= +lt_prog_compiler_static_GCJ= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_static_GCJ='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_GCJ='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_GCJ='-fno-common' + ;; + + interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared_GCJ=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_GCJ=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_GCJ='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic_GCJ='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl_GCJ='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_GCJ='-Bstatic' + else + lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic_GCJ='-qnocommon' + lt_prog_compiler_wl_GCJ='-Wl,' + ;; + esac + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl_GCJ='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_GCJ='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl_GCJ='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + linux*) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-fpic' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl_GCJ='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl_GCJ='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl_GCJ='-Qoption ld ';; + *) + lt_prog_compiler_wl_GCJ='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl_GCJ='-Qoption ld ' + lt_prog_compiler_pic_GCJ='-PIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic_GCJ='-Kconform_pic' + lt_prog_compiler_static_GCJ='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_can_build_shared_GCJ=no + ;; + + uts4*) + lt_prog_compiler_pic_GCJ='-pic' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared_GCJ=no + ;; + esac + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_GCJ" >&5 +$as_echo "$lt_prog_compiler_pic_GCJ" >&6; } + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_GCJ"; then + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; } +if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_prog_compiler_pic_works_GCJ=no + ac_outfile=conftest.$ac_objext + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_GCJ" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:16516: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:16520: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_pic_works_GCJ=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_works_GCJ" >&5 +$as_echo "$lt_prog_compiler_pic_works_GCJ" >&6; } + +if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then + case $lt_prog_compiler_pic_GCJ in + "" | " "*) ;; + *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; + esac +else + lt_prog_compiler_pic_GCJ= + lt_prog_compiler_can_build_shared_GCJ=no +fi + +fi +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_GCJ= + ;; + *) + lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" + ;; +esac + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_prog_compiler_static_works_GCJ=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_prog_compiler_static_works_GCJ=yes + fi + else + lt_prog_compiler_static_works_GCJ=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_static_works_GCJ" >&5 +$as_echo "$lt_prog_compiler_static_works_GCJ" >&6; } + +if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then + : +else + lt_prog_compiler_static_GCJ= +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_GCJ=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:16620: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:16624: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_GCJ=yes + fi + fi + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; } + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag_GCJ= + enable_shared_with_static_runtimes_GCJ=no + archive_cmds_GCJ= + archive_expsym_cmds_GCJ= + old_archive_From_new_cmds_GCJ= + old_archive_from_expsyms_cmds_GCJ= + export_dynamic_flag_spec_GCJ= + whole_archive_flag_spec_GCJ= + thread_safe_flag_spec_GCJ= + hardcode_libdir_flag_spec_GCJ= + hardcode_libdir_flag_spec_ld_GCJ= + hardcode_libdir_separator_GCJ= + hardcode_direct_GCJ=no + hardcode_minus_L_GCJ=no + hardcode_shlibpath_var_GCJ=unsupported + link_all_deplibs_GCJ=unknown + hardcode_automatic_GCJ=no + module_cmds_GCJ= + module_expsym_cmds_GCJ= + always_export_symbols_GCJ=no + export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms_GCJ= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs_GCJ=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_GCJ= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs_GCJ=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs_GCJ=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_GCJ=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_GCJ='-L$libdir' + allow_undefined_flag_GCJ=unsupported + always_export_symbols_GCJ=no + enable_shared_with_static_runtimes_GCJ=yes + export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_GCJ=no + fi + ;; + + interix3*) + hardcode_direct_GCJ=no + hardcode_shlibpath_var_GCJ=no + hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' + export_dynamic_flag_spec_GCJ='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + linux*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + else + ld_shlibs_GCJ=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs_GCJ=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs_GCJ=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + esac + + if test "$ld_shlibs_GCJ" = no; then + runpath_var= + hardcode_libdir_flag_spec_GCJ= + export_dynamic_flag_spec_GCJ= + whole_archive_flag_spec_GCJ= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag_GCJ=unsupported + always_export_symbols_GCJ=yes + archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L_GCJ=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct_GCJ=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_GCJ='' + hardcode_direct_GCJ=yes + hardcode_libdir_separator_GCJ=':' + link_all_deplibs_GCJ=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct_GCJ=yes + else + # We have old collect2 + hardcode_direct_GCJ=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_GCJ=yes + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_libdir_separator_GCJ= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_GCJ=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_GCJ='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_GCJ="-z nodefs" + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_GCJ=' ${wl}-bernotok' + allow_undefined_flag_GCJ=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_GCJ='$convenience' + archive_cmds_need_lc_GCJ=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + # see comment about different semantics on the GNU ld section + ld_shlibs_GCJ=no + ;; + + bsdi[45]*) + export_dynamic_flag_spec_GCJ=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec_GCJ=' ' + allow_undefined_flag_GCJ=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds_GCJ='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes_GCJ=yes + ;; + + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc_GCJ=no + hardcode_direct_GCJ=no + hardcode_automatic_GCJ=yes + hardcode_shlibpath_var_GCJ=unsupported + whole_archive_flag_spec_GCJ='' + link_all_deplibs_GCJ=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' + module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_GCJ=no + ;; + esac + fi + ;; + + dgux*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_shlibpath_var_GCJ=no + ;; + + freebsd1*) + ld_shlibs_GCJ=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes + hardcode_minus_L_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu | dragonfly*) + archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + hardcode_direct_GCJ=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + + hardcode_direct_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' + hardcode_direct_GCJ=no + hardcode_shlibpath_var_GCJ=no + ;; + *) + hardcode_direct_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' + fi + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + link_all_deplibs_GCJ=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + newsos6) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + hardcode_shlibpath_var_GCJ=no + ;; + + openbsd*) + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' + export_dynamic_flag_spec_GCJ='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + ;; + *) + archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + allow_undefined_flag_GCJ=unsupported + archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag_GCJ=' -expect_unresolved \*' + archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag_GCJ=' -expect_unresolved \*' + archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec_GCJ='-rpath $libdir' + fi + hardcode_libdir_separator_GCJ=: + ;; + + solaris*) + no_undefined_flag_GCJ=' -z text' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + wlarc='' + archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_shlibpath_var_GCJ=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine linker options so we + # cannot just pass the convience library names through + # without $wl, iff we do not link with $LD. + # Luckily, gcc supports the same syntax we need for Sun Studio. + # Supported since Solaris 2.6 (maybe 2.5.1?) + case $wlarc in + '') + whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; + *) + whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; + esac ;; + esac + link_all_deplibs_GCJ=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_direct_GCJ=yes + hardcode_minus_L_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds_GCJ='$CC -r -o $output$reload_objs' + hardcode_direct_GCJ=no + ;; + motorola) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_GCJ=no + ;; + + sysv4.3*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_GCJ=no + export_dynamic_flag_spec_GCJ='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_GCJ=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs_GCJ=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) + no_undefined_flag_GCJ='${wl}-z,text' + archive_cmds_need_lc_GCJ=no + hardcode_shlibpath_var_GCJ=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag_GCJ='${wl}-z,text' + allow_undefined_flag_GCJ='${wl}-z,nodefs' + archive_cmds_need_lc_GCJ=no + hardcode_shlibpath_var_GCJ=no + hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator_GCJ=':' + link_all_deplibs_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_shlibpath_var_GCJ=no + ;; + + *) + ld_shlibs_GCJ=no + ;; + esac + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_GCJ" >&5 +$as_echo "$ld_shlibs_GCJ" >&6; } +test "$ld_shlibs_GCJ" = no && can_build_shared=no + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_GCJ" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_GCJ=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_GCJ in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_GCJ + pic_flag=$lt_prog_compiler_pic_GCJ + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ + allow_undefined_flag_GCJ= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + archive_cmds_need_lc_GCJ=no + else + archive_cmds_need_lc_GCJ=yes + fi + allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_GCJ" >&5 +$as_echo "$archive_cmds_need_lc_GCJ" >&6; } + ;; + esac + fi + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + freebsd*) # from 4.6 on + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix3*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +knetbsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action_GCJ= +if test -n "$hardcode_libdir_flag_spec_GCJ" || \ + test -n "$runpath_var_GCJ" || \ + test "X$hardcode_automatic_GCJ" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_GCJ" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && + test "$hardcode_minus_L_GCJ" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_GCJ=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_GCJ=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_GCJ=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_GCJ" >&5 +$as_echo "$hardcode_action_GCJ" >&6; } + +if test "$hardcode_action_GCJ" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_GCJ \ + CC_GCJ \ + LD_GCJ \ + lt_prog_compiler_wl_GCJ \ + lt_prog_compiler_pic_GCJ \ + lt_prog_compiler_static_GCJ \ + lt_prog_compiler_no_builtin_flag_GCJ \ + export_dynamic_flag_spec_GCJ \ + thread_safe_flag_spec_GCJ \ + whole_archive_flag_spec_GCJ \ + enable_shared_with_static_runtimes_GCJ \ + old_archive_cmds_GCJ \ + old_archive_from_new_cmds_GCJ \ + predep_objects_GCJ \ + postdep_objects_GCJ \ + predeps_GCJ \ + postdeps_GCJ \ + compiler_lib_search_path_GCJ \ + archive_cmds_GCJ \ + archive_expsym_cmds_GCJ \ + postinstall_cmds_GCJ \ + postuninstall_cmds_GCJ \ + old_archive_from_expsyms_cmds_GCJ \ + allow_undefined_flag_GCJ \ + no_undefined_flag_GCJ \ + export_symbols_cmds_GCJ \ + hardcode_libdir_flag_spec_GCJ \ + hardcode_libdir_flag_spec_ld_GCJ \ + hardcode_libdir_separator_GCJ \ + hardcode_automatic_GCJ \ + module_cmds_GCJ \ + module_expsym_cmds_GCJ \ + lt_cv_prog_compiler_c_o_GCJ \ + exclude_expsyms_GCJ \ + include_expsyms_GCJ; do + + case $var in + old_archive_cmds_GCJ | \ + old_archive_from_new_cmds_GCJ | \ + archive_cmds_GCJ | \ + archive_expsym_cmds_GCJ | \ + module_cmds_GCJ | \ + module_expsym_cmds_GCJ | \ + old_archive_from_expsyms_cmds_GCJ | \ + export_symbols_cmds_GCJ | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_GCJ + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + +# A language-specific compiler. +CC=$lt_compiler_GCJ + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_GCJ + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_GCJ + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_GCJ + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_GCJ +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_GCJ + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_GCJ +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_GCJ +archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_GCJ +module_expsym_cmds=$lt_module_expsym_cmds_GCJ + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_GCJ + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_GCJ + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_GCJ + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_GCJ + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_GCJ + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_GCJ + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_GCJ + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_GCJ + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_GCJ + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_GCJ + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_GCJ + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path_GCJ" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_GCJ + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_GCJ + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_GCJ + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_GCJ + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + else + tagname="" + fi + ;; + + RC) + + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +objext_RC=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +printf "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +printf "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm conftest* + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${RC-"windres"} +compiler=$CC +compiler_RC=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + +lt_cv_prog_compiler_c_o_RC=yes + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_RC \ + CC_RC \ + LD_RC \ + lt_prog_compiler_wl_RC \ + lt_prog_compiler_pic_RC \ + lt_prog_compiler_static_RC \ + lt_prog_compiler_no_builtin_flag_RC \ + export_dynamic_flag_spec_RC \ + thread_safe_flag_spec_RC \ + whole_archive_flag_spec_RC \ + enable_shared_with_static_runtimes_RC \ + old_archive_cmds_RC \ + old_archive_from_new_cmds_RC \ + predep_objects_RC \ + postdep_objects_RC \ + predeps_RC \ + postdeps_RC \ + compiler_lib_search_path_RC \ + archive_cmds_RC \ + archive_expsym_cmds_RC \ + postinstall_cmds_RC \ + postuninstall_cmds_RC \ + old_archive_from_expsyms_cmds_RC \ + allow_undefined_flag_RC \ + no_undefined_flag_RC \ + export_symbols_cmds_RC \ + hardcode_libdir_flag_spec_RC \ + hardcode_libdir_flag_spec_ld_RC \ + hardcode_libdir_separator_RC \ + hardcode_automatic_RC \ + module_cmds_RC \ + module_expsym_cmds_RC \ + lt_cv_prog_compiler_c_o_RC \ + exclude_expsyms_RC \ + include_expsyms_RC; do + + case $var in + old_archive_cmds_RC | \ + old_archive_from_new_cmds_RC | \ + archive_cmds_RC | \ + archive_expsym_cmds_RC | \ + module_cmds_RC | \ + module_expsym_cmds_RC | \ + old_archive_from_expsyms_cmds_RC | \ + export_symbols_cmds_RC | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_RC + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + +# A language-specific compiler. +CC=$lt_compiler_RC + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_RC + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_RC + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_RC + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_RC +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_RC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_RC +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_RC +archive_expsym_cmds=$lt_archive_expsym_cmds_RC +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_RC +module_expsym_cmds=$lt_module_expsym_cmds_RC + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_RC + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_RC + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_RC + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_RC + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_RC + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_RC + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_RC + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_RC + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_RC + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_RC + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_RC + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_RC + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_RC + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path_RC" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_RC + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_RC + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_RC + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_RC + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + ;; + + *) + as_fn_error $? "Unsupported tag name: $tagname" "$LINENO" 5 + ;; + esac + + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" + + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + as_fn_error $? "unable to update list of available tagged configurations." "$LINENO" 5 + fi +fi + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +# Prevent multiple expansion + + + + + + + + + + + + + + + + + + + + +# Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_AR+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + case $AR in + [\\/]* | ?:[\\/]*) + ac_cv_path_AR="$AR" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_dummy="$PATH:/usr/ccs/bin" +for as_dir in $as_dummy +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_AR="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_path_AR" && ac_cv_path_AR="/usr/bin/ar" + ;; +esac +fi +AR=$ac_cv_path_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + +# Options + + +# Check whether --with-tightvnc-filetransfer was given. +if test "${with_tightvnc_filetransfer+set}" = set; then : + withval=$with_tightvnc_filetransfer; +else + with_tightvnc_filetransfer=yes +fi + +# AC_DEFINE moved to after libpthread check. + +# WebSockets support +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for __b64_ntop in -lresolv" >&5 +$as_echo_n "checking for __b64_ntop in -lresolv... " >&6; } +if test "${ac_cv_lib_resolv___b64_ntop+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lresolv $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char __b64_ntop (); +int +main () +{ +return __b64_ntop (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_resolv___b64_ntop=yes +else + ac_cv_lib_resolv___b64_ntop=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_resolv___b64_ntop" >&5 +$as_echo "$ac_cv_lib_resolv___b64_ntop" >&6; } +if test "x$ac_cv_lib_resolv___b64_ntop" = x""yes; then : + HAVE_B64="true" +else + HAVE_B64="false" +fi + + + +# Check whether --with-websockets was given. +if test "${with_websockets+set}" = set; then : + withval=$with_websockets; +else + with_websockets=yes +fi + +# AC_DEFINE moved to after libresolve check. + + + +# Check whether --with-24bpp was given. +if test "${with_24bpp+set}" = set; then : + withval=$with_24bpp; +else + with_24bpp=yes +fi + +if test "x$with_24bpp" = "xyes"; then + $as_echo "#define ALLOW24BPP 1" >>confdefs.h + +fi + + +# Check whether --with-ffmpeg was given. +if test "${with_ffmpeg+set}" = set; then : + withval=$with_ffmpeg; +fi + + + if test ! -z "$with_ffmpeg"; then + WITH_FFMPEG_TRUE= + WITH_FFMPEG_FALSE='#' +else + WITH_FFMPEG_TRUE='#' + WITH_FFMPEG_FALSE= +fi + +if test ! -z "$with_ffmpeg"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for lame_init in -lmp3lame" >&5 +$as_echo_n "checking for lame_init in -lmp3lame... " >&6; } +if test "${ac_cv_lib_mp3lame_lame_init+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lmp3lame $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char lame_init (); +int +main () +{ +return lame_init (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_mp3lame_lame_init=yes +else + ac_cv_lib_mp3lame_lame_init=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mp3lame_lame_init" >&5 +$as_echo "$ac_cv_lib_mp3lame_lame_init" >&6; } +if test "x$ac_cv_lib_mp3lame_lame_init" = x""yes; then : + HAVE_MP3LAME="true" +else + HAVE_MP3LAME="false" +fi + +fi + if test "$HAVE_MP3LAME" = "true"; then + HAVE_MP3LAME_TRUE= + HAVE_MP3LAME_FALSE='#' +else + HAVE_MP3LAME_TRUE='#' + HAVE_MP3LAME_FALSE= +fi + + +# Seem to need this dummy here to induce the 'checking for egrep... grep -E', etc. +# before it seemed to be inside the with_jpeg conditional. +ac_fn_c_check_header_mongrel "$LINENO" "thenonexistentheader.h" "ac_cv_header_thenonexistentheader_h" "$ac_includes_default" +if test "x$ac_cv_header_thenonexistentheader_h" = x""yes; then : + HAVE_THENONEXISTENTHEADER_H="true" +fi + + + +# set some ld -R nonsense +# +uname_s=`(uname -s) 2>/dev/null` +ld_minus_R="yes" +if test "x$uname_s" = "xHP-UX"; then + ld_minus_R="no" +elif test "x$uname_s" = "xOSF1"; then + ld_minus_R="no" +elif test "x$uname_s" = "xDarwin"; then + ld_minus_R="no" +fi + +# Check for OpenSSL + + +# Check whether --with-crypt was given. +if test "${with_crypt+set}" = set; then : + withval=$with_crypt; +fi + +if test "x$with_crypt" != "xno"; then + for ac_func in crypt +do : + ac_fn_c_check_func "$LINENO" "crypt" "ac_cv_func_crypt" +if test "x$ac_cv_func_crypt" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_CRYPT 1 +_ACEOF + HAVE_LIBC_CRYPT="true" +fi +done + + if test -z "$HAVE_LIBC_CRYPT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for crypt in -lcrypt" >&5 +$as_echo_n "checking for crypt in -lcrypt... " >&6; } +if test "${ac_cv_lib_crypt_crypt+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lcrypt $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char crypt (); +int +main () +{ +return crypt (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_crypt_crypt=yes +else + ac_cv_lib_crypt_crypt=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_crypt_crypt" >&5 +$as_echo "$ac_cv_lib_crypt_crypt" >&6; } +if test "x$ac_cv_lib_crypt_crypt" = x""yes; then : + CRYPT_LIBS="-lcrypt" + $as_echo "#define HAVE_LIBCRYPT 1" >>confdefs.h + +fi + + fi +fi + + +# some OS's need both -lssl and -lcrypto on link line: + + +# Check whether --with-crypto was given. +if test "${with_crypto+set}" = set; then : + withval=$with_crypto; +fi + + + + +# Check whether --with-ssl was given. +if test "${with_ssl+set}" = set; then : + withval=$with_ssl; +fi + + +if test "x$with_crypto" != "xno" -a "x$with_ssl" != "xno"; then + if test ! -z "$with_ssl" -a "x$with_ssl" != "xyes"; then + saved_CPPFLAGS="$CPPFLAGS" + saved_LDFLAGS="$LDFLAGS" + CPPFLAGS="$CPPFLAGS -I$with_ssl/include" + LDFLAGS="$LDFLAGS -L$with_ssl/lib" + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + LDFLAGS="$LDFLAGS -Xlinker -R$with_ssl/lib" + else + LDFLAGS="$LDFLAGS -R$with_ssl/lib" + fi + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for RAND_file_name in -lcrypto" >&5 +$as_echo_n "checking for RAND_file_name in -lcrypto... " >&6; } +if test "${ac_cv_lib_crypto_RAND_file_name+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lcrypto $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char RAND_file_name (); +int +main () +{ +return RAND_file_name (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_crypto_RAND_file_name=yes +else + ac_cv_lib_crypto_RAND_file_name=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_crypto_RAND_file_name" >&5 +$as_echo "$ac_cv_lib_crypto_RAND_file_name" >&6; } +if test "x$ac_cv_lib_crypto_RAND_file_name" = x""yes; then : + $as_echo "#define HAVE_LIBCRYPTO 1" >>confdefs.h + HAVE_LIBCRYPTO="true" +fi + + if test ! -z "$with_ssl" -a "x$with_ssl" != "xyes"; then + if test "x$HAVE_LIBCRYPTO" != "xtrue"; then + CPPFLAGS="$saved_CPPFLAGS" + LDFLAGS="$saved_LDFLAGS" + fi + fi +fi + + +if test "x$with_ssl" != "xno"; then + if test "x$HAVE_LIBCRYPTO" = "xtrue"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SSL_library_init in -lssl" >&5 +$as_echo_n "checking for SSL_library_init in -lssl... " >&6; } +if test "${ac_cv_lib_ssl_SSL_library_init+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lssl -lcrypto $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char SSL_library_init (); +int +main () +{ +return SSL_library_init (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_ssl_SSL_library_init=yes +else + ac_cv_lib_ssl_SSL_library_init=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ssl_SSL_library_init" >&5 +$as_echo "$ac_cv_lib_ssl_SSL_library_init" >&6; } +if test "x$ac_cv_lib_ssl_SSL_library_init" = x""yes; then : + SSL_LIBS="-lssl -lcrypto" + $as_echo "#define HAVE_LIBSSL 1" >>confdefs.h + HAVE_LIBSSL="true" +fi + + else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SSL_library_init in -lssl" >&5 +$as_echo_n "checking for SSL_library_init in -lssl... " >&6; } +if test "${ac_cv_lib_ssl_SSL_library_init+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lssl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char SSL_library_init (); +int +main () +{ +return SSL_library_init (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_ssl_SSL_library_init=yes +else + ac_cv_lib_ssl_SSL_library_init=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ssl_SSL_library_init" >&5 +$as_echo "$ac_cv_lib_ssl_SSL_library_init" >&6; } +if test "x$ac_cv_lib_ssl_SSL_library_init" = x""yes; then : + SSL_LIBS="-lssl" + $as_echo "#define HAVE_LIBSSL 1" >>confdefs.h + HAVE_LIBSSL="true" +fi + + fi +fi + + if test ! -z "$SSL_LIBS"; then + HAVE_LIBSSL_TRUE= + HAVE_LIBSSL_FALSE='#' +else + HAVE_LIBSSL_TRUE='#' + HAVE_LIBSSL_FALSE= +fi + + +# Checks for X libraries +HAVE_X11="false" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5 +$as_echo_n "checking for X... " >&6; } + + +# Check whether --with-x was given. +if test "${with_x+set}" = set; then : + withval=$with_x; +fi + +# $have_x is `yes', `no', `disabled', or empty when we do not yet know. +if test "x$with_x" = xno; then + # The user explicitly disabled X. + have_x=disabled +else + case $x_includes,$x_libraries in #( + *\'*) as_fn_error $? "cannot use X directory names containing '" "$LINENO" 5 ;; #( + *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + # One or both of the vars are not set, and there is no cached value. +ac_x_includes=no ac_x_libraries=no +rm -f -r conftest.dir +if mkdir conftest.dir; then + cd conftest.dir + cat >Imakefile <<'_ACEOF' +incroot: + @echo incroot='${INCROOT}' +usrlibdir: + @echo usrlibdir='${USRLIBDIR}' +libdir: + @echo libdir='${LIBDIR}' +_ACEOF + if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then + # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. + for ac_var in incroot usrlibdir libdir; do + eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" + done + # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. + for ac_extension in a so sl dylib la dll; do + if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && + test -f "$ac_im_libdir/libX11.$ac_extension"; then + ac_im_usrlibdir=$ac_im_libdir; break + fi + done + # Screen out bogus values from the imake configuration. They are + # bogus both because they are the default anyway, and because + # using them would break gcc on systems where it needs fixed includes. + case $ac_im_incroot in + /usr/include) ac_x_includes= ;; + *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; + esac + case $ac_im_usrlibdir in + /usr/lib | /usr/lib64 | /lib | /lib64) ;; + *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; + esac + fi + cd .. + rm -f -r conftest.dir +fi + +# Standard set of common directories for X headers. +# Check X11 before X11Rn because it is often a symlink to the current release. +ac_x_header_dirs=' +/usr/X11/include +/usr/X11R7/include +/usr/X11R6/include +/usr/X11R5/include +/usr/X11R4/include + +/usr/include/X11 +/usr/include/X11R7 +/usr/include/X11R6 +/usr/include/X11R5 +/usr/include/X11R4 + +/usr/local/X11/include +/usr/local/X11R7/include +/usr/local/X11R6/include +/usr/local/X11R5/include +/usr/local/X11R4/include + +/usr/local/include/X11 +/usr/local/include/X11R7 +/usr/local/include/X11R6 +/usr/local/include/X11R5 +/usr/local/include/X11R4 + +/usr/X386/include +/usr/x386/include +/usr/XFree86/include/X11 + +/usr/include +/usr/local/include +/usr/unsupported/include +/usr/athena/include +/usr/local/x11r5/include +/usr/lpp/Xamples/include + +/usr/openwin/include +/usr/openwin/share/include' + +if test "$ac_x_includes" = no; then + # Guess where to find include files, by looking for Xlib.h. + # First, try using that file with no special directory specified. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # We can compile using X headers with no special include directory. +ac_x_includes= +else + for ac_dir in $ac_x_header_dirs; do + if test -r "$ac_dir/X11/Xlib.h"; then + ac_x_includes=$ac_dir + break + fi +done +fi +rm -f conftest.err conftest.i conftest.$ac_ext +fi # $ac_x_includes = no + +if test "$ac_x_libraries" = no; then + # Check for the libraries. + # See if we find them without any special options. + # Don't add to $LIBS permanently. + ac_save_LIBS=$LIBS + LIBS="-lX11 $LIBS" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +XrmInitialize () + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + LIBS=$ac_save_LIBS +# We can link X programs with no special library path. +ac_x_libraries= +else + LIBS=$ac_save_LIBS +for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` +do + # Don't even attempt the hair of trying to link an X program! + for ac_extension in a so sl dylib la dll; do + if test -r "$ac_dir/libX11.$ac_extension"; then + ac_x_libraries=$ac_dir + break 2 + fi + done +done +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi # $ac_x_libraries = no + +case $ac_x_includes,$ac_x_libraries in #( + no,* | *,no | *\'*) + # Didn't find X, or a directory has "'" in its name. + ac_cv_have_x="have_x=no";; #( + *) + # Record where we found X for the cache. + ac_cv_have_x="have_x=yes\ + ac_x_includes='$ac_x_includes'\ + ac_x_libraries='$ac_x_libraries'" +esac +fi +;; #( + *) have_x=yes;; + esac + eval "$ac_cv_have_x" +fi # $with_x != no + +if test "$have_x" != yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_x" >&5 +$as_echo "$have_x" >&6; } + no_x=yes +else + # If each of the values was on the command line, it overrides each guess. + test "x$x_includes" = xNONE && x_includes=$ac_x_includes + test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries + # Update the cache value to reflect the command line values. + ac_cv_have_x="have_x=yes\ + ac_x_includes='$x_includes'\ + ac_x_libraries='$x_libraries'" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: libraries $x_libraries, headers $x_includes" >&5 +$as_echo "libraries $x_libraries, headers $x_includes" >&6; } +fi + +if test "$no_x" = yes; then + # Not all programs may use this symbol, but it does not hurt to define it. + +$as_echo "#define X_DISPLAY_MISSING 1" >>confdefs.h + + X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= +else + if test -n "$x_includes"; then + X_CFLAGS="$X_CFLAGS -I$x_includes" + fi + + # It would also be nice to do this for all -L options, not just this one. + if test -n "$x_libraries"; then + X_LIBS="$X_LIBS -L$x_libraries" + # For Solaris; some versions of Sun CC require a space after -R and + # others require no space. Words are not sufficient . . . . + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -R must be followed by a space" >&5 +$as_echo_n "checking whether -R must be followed by a space... " >&6; } + ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" + ac_xsave_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + X_LIBS="$X_LIBS -R$x_libraries" +else + LIBS="$ac_xsave_LIBS -R $x_libraries" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + X_LIBS="$X_LIBS -R $x_libraries" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: neither works" >&5 +$as_echo "neither works" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_c_werror_flag=$ac_xsave_c_werror_flag + LIBS=$ac_xsave_LIBS + fi + + # Check for system-dependent libraries X programs must link with. + # Do this before checking for the system-independent R6 libraries + # (-lICE), since we may need -lsocket or whatever for X linking. + + if test "$ISC" = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" + else + # Martyn Johnson says this is needed for Ultrix, if the X + # libraries were built with DECnet support. And Karl Berry says + # the Alpha needs dnet_stub (dnet does not exist). + ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XOpenDisplay (); +int +main () +{ +return XOpenDisplay (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet" >&5 +$as_echo_n "checking for dnet_ntoa in -ldnet... " >&6; } +if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldnet $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dnet_ntoa (); +int +main () +{ +return dnet_ntoa (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dnet_dnet_ntoa=yes +else + ac_cv_lib_dnet_dnet_ntoa=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 +$as_echo "$ac_cv_lib_dnet_dnet_ntoa" >&6; } +if test "x$ac_cv_lib_dnet_dnet_ntoa" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" +fi + + if test $ac_cv_lib_dnet_dnet_ntoa = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet_stub" >&5 +$as_echo_n "checking for dnet_ntoa in -ldnet_stub... " >&6; } +if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldnet_stub $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dnet_ntoa (); +int +main () +{ +return dnet_ntoa (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dnet_stub_dnet_ntoa=yes +else + ac_cv_lib_dnet_stub_dnet_ntoa=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 +$as_echo "$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } +if test "x$ac_cv_lib_dnet_stub_dnet_ntoa" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" +fi + + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$ac_xsave_LIBS" + + # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, + # to get the SysV transport functions. + # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) + # needs -lnsl. + # The nsl library prevents programs from opening the X display + # on Irix 5.2, according to T.E. Dickey. + # The functions gethostbyname, getservbyname, and inet_addr are + # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. + ac_fn_c_check_func "$LINENO" "gethostbyname" "ac_cv_func_gethostbyname" +if test "x$ac_cv_func_gethostbyname" = x""yes; then : + +fi + + if test $ac_cv_func_gethostbyname = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5 +$as_echo_n "checking for gethostbyname in -lnsl... " >&6; } +if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lnsl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char gethostbyname (); +int +main () +{ +return gethostbyname (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_nsl_gethostbyname=yes +else + ac_cv_lib_nsl_gethostbyname=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5 +$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; } +if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" +fi + + if test $ac_cv_lib_nsl_gethostbyname = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lbsd" >&5 +$as_echo_n "checking for gethostbyname in -lbsd... " >&6; } +if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lbsd $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char gethostbyname (); +int +main () +{ +return gethostbyname (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_bsd_gethostbyname=yes +else + ac_cv_lib_bsd_gethostbyname=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bsd_gethostbyname" >&5 +$as_echo "$ac_cv_lib_bsd_gethostbyname" >&6; } +if test "x$ac_cv_lib_bsd_gethostbyname" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" +fi + + fi + fi + + # lieder@skyler.mavd.honeywell.com says without -lsocket, + # socket/setsockopt and other routines are undefined under SCO ODT + # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary + # on later versions), says Simon Leinen: it contains gethostby* + # variants that don't use the name server (or something). -lsocket + # must be given before -lnsl if both are needed. We assume that + # if connect needs -lnsl, so does gethostbyname. + ac_fn_c_check_func "$LINENO" "connect" "ac_cv_func_connect" +if test "x$ac_cv_func_connect" = x""yes; then : + +fi + + if test $ac_cv_func_connect = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for connect in -lsocket" >&5 +$as_echo_n "checking for connect in -lsocket... " >&6; } +if test "${ac_cv_lib_socket_connect+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsocket $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char connect (); +int +main () +{ +return connect (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_socket_connect=yes +else + ac_cv_lib_socket_connect=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_connect" >&5 +$as_echo "$ac_cv_lib_socket_connect" >&6; } +if test "x$ac_cv_lib_socket_connect" = x""yes; then : + X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" +fi + + fi + + # Guillermo Gomez says -lposix is necessary on A/UX. + ac_fn_c_check_func "$LINENO" "remove" "ac_cv_func_remove" +if test "x$ac_cv_func_remove" = x""yes; then : + +fi + + if test $ac_cv_func_remove = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for remove in -lposix" >&5 +$as_echo_n "checking for remove in -lposix... " >&6; } +if test "${ac_cv_lib_posix_remove+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lposix $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char remove (); +int +main () +{ +return remove (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_posix_remove=yes +else + ac_cv_lib_posix_remove=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_posix_remove" >&5 +$as_echo "$ac_cv_lib_posix_remove" >&6; } +if test "x$ac_cv_lib_posix_remove" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" +fi + + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. + ac_fn_c_check_func "$LINENO" "shmat" "ac_cv_func_shmat" +if test "x$ac_cv_func_shmat" = x""yes; then : + +fi + + if test $ac_cv_func_shmat = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shmat in -lipc" >&5 +$as_echo_n "checking for shmat in -lipc... " >&6; } +if test "${ac_cv_lib_ipc_shmat+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lipc $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shmat (); +int +main () +{ +return shmat (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_ipc_shmat=yes +else + ac_cv_lib_ipc_shmat=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ipc_shmat" >&5 +$as_echo "$ac_cv_lib_ipc_shmat" >&6; } +if test "x$ac_cv_lib_ipc_shmat" = x""yes; then : + X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" +fi + + fi + fi + + # Check for libraries that X11R6 Xt/Xaw programs need. + ac_save_LDFLAGS=$LDFLAGS + test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" + # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to + # check for ICE first), but we must link in the order -lSM -lICE or + # we get undefined symbols. So assume we have SM if we have ICE. + # These have to be linked with before -lX11, unlike the other + # libraries we check for below, so use a different variable. + # John Interrante, Karl Berry + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for IceConnectionNumber in -lICE" >&5 +$as_echo_n "checking for IceConnectionNumber in -lICE... " >&6; } +if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lICE $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char IceConnectionNumber (); +int +main () +{ +return IceConnectionNumber (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_ICE_IceConnectionNumber=yes +else + ac_cv_lib_ICE_IceConnectionNumber=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 +$as_echo "$ac_cv_lib_ICE_IceConnectionNumber" >&6; } +if test "x$ac_cv_lib_ICE_IceConnectionNumber" = x""yes; then : + X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" +fi + + LDFLAGS=$ac_save_LDFLAGS + +fi + + + +# See if we are to build x11vnc: + + +# Check whether --with-system-libvncserver was given. +if test "${with_system_libvncserver+set}" = set; then : + withval=$with_system_libvncserver; +fi + + +# Check whether --with-x11vnc was given. +if test "${with_x11vnc+set}" = set; then : + withval=$with_x11vnc; +fi + + +if test ! -z "$with_x11vnc" -a "$with_x11vnc" = "yes"; then + build_x11vnc="yes" +elif test "$PACKAGE_NAME" = "x11vnc"; then + build_x11vnc="yes" +else + build_x11vnc="no" +fi + +# x11vnc only: +if test "$build_x11vnc" = "yes"; then + + + + + + + + + + + + + + + + + + + + + + + +# Check whether --with-xkeyboard was given. +if test "${with_xkeyboard+set}" = set; then : + withval=$with_xkeyboard; +fi + + +# Check whether --with-xinerama was given. +if test "${with_xinerama+set}" = set; then : + withval=$with_xinerama; +fi + + +# Check whether --with-xrandr was given. +if test "${with_xrandr+set}" = set; then : + withval=$with_xrandr; +fi + + +# Check whether --with-xfixes was given. +if test "${with_xfixes+set}" = set; then : + withval=$with_xfixes; +fi + + +# Check whether --with-xdamage was given. +if test "${with_xdamage+set}" = set; then : + withval=$with_xdamage; +fi + + +# Check whether --with-xtrap was given. +if test "${with_xtrap+set}" = set; then : + withval=$with_xtrap; +fi + + +# Check whether --with-xrecord was given. +if test "${with_xrecord+set}" = set; then : + withval=$with_xrecord; +fi + + +# Check whether --with-fbpm was given. +if test "${with_fbpm+set}" = set; then : + withval=$with_fbpm; +fi + + +# Check whether --with-dpms was given. +if test "${with_dpms+set}" = set; then : + withval=$with_dpms; +fi + + +# Check whether --with-v4l was given. +if test "${with_v4l+set}" = set; then : + withval=$with_v4l; +fi + + +# Check whether --with-fbdev was given. +if test "${with_fbdev+set}" = set; then : + withval=$with_fbdev; +fi + + +# Check whether --with-uinput was given. +if test "${with_uinput+set}" = set; then : + withval=$with_uinput; +fi + + +# Check whether --with-macosx-native was given. +if test "${with_macosx_native+set}" = set; then : + withval=$with_macosx_native; +fi + + +fi +# end x11vnc only. + +if test "x$with_x" = "xno"; then + HAVE_X11="false" +elif test "$X_CFLAGS" != "-DX_DISPLAY_MISSING"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XGetImage in -lX11" >&5 +$as_echo_n "checking for XGetImage in -lX11... " >&6; } +if test "${ac_cv_lib_X11_XGetImage+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lX11 $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XGetImage (); +int +main () +{ +return XGetImage (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_X11_XGetImage=yes +else + ac_cv_lib_X11_XGetImage=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_X11_XGetImage" >&5 +$as_echo "$ac_cv_lib_X11_XGetImage" >&6; } +if test "x$ac_cv_lib_X11_XGetImage" = x""yes; then : + $as_echo "#define HAVE_X11 1" >>confdefs.h + HAVE_X11="true" +else + HAVE_X11="false" +fi + + + # x11vnc only: + if test $HAVE_X11 = "true" -a "$build_x11vnc" = "yes"; then + X_PRELIBS="$X_PRELIBS -lXext" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XShmGetImage in -lXext" >&5 +$as_echo_n "checking for XShmGetImage in -lXext... " >&6; } +if test "${ac_cv_lib_Xext_XShmGetImage+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXext $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XShmGetImage (); +int +main () +{ +return XShmGetImage (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Xext_XShmGetImage=yes +else + ac_cv_lib_Xext_XShmGetImage=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xext_XShmGetImage" >&5 +$as_echo "$ac_cv_lib_Xext_XShmGetImage" >&6; } +if test "x$ac_cv_lib_Xext_XShmGetImage" = x""yes; then : + $as_echo "#define HAVE_XSHM 1" >>confdefs.h + +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XReadScreen in -lXext" >&5 +$as_echo_n "checking for XReadScreen in -lXext... " >&6; } +if test "${ac_cv_lib_Xext_XReadScreen+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXext $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XReadScreen (); +int +main () +{ +return XReadScreen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Xext_XReadScreen=yes +else + ac_cv_lib_Xext_XReadScreen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xext_XReadScreen" >&5 +$as_echo "$ac_cv_lib_Xext_XReadScreen" >&6; } +if test "x$ac_cv_lib_Xext_XReadScreen" = x""yes; then : + $as_echo "#define HAVE_SOLARIS_XREADSCREEN 1" >>confdefs.h + +fi + + + ac_fn_c_check_header_compile "$LINENO" "X11/extensions/readdisplay.h" "ac_cv_header_X11_extensions_readdisplay_h" "#include +" +if test "x$ac_cv_header_X11_extensions_readdisplay_h" = x""yes; then : + $as_echo "#define HAVE_IRIX_XREADDISPLAY 1" >>confdefs.h + +fi + + + + if test "x$with_fbpm" != "xno"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FBPMForceLevel in -lXext" >&5 +$as_echo_n "checking for FBPMForceLevel in -lXext... " >&6; } +if test "${ac_cv_lib_Xext_FBPMForceLevel+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXext $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char FBPMForceLevel (); +int +main () +{ +return FBPMForceLevel (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Xext_FBPMForceLevel=yes +else + ac_cv_lib_Xext_FBPMForceLevel=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xext_FBPMForceLevel" >&5 +$as_echo "$ac_cv_lib_Xext_FBPMForceLevel" >&6; } +if test "x$ac_cv_lib_Xext_FBPMForceLevel" = x""yes; then : + $as_echo "#define HAVE_FBPM 1" >>confdefs.h + +fi + + fi + + if test "x$with_dpms" != "xno"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for DPMSForceLevel in -lXext" >&5 +$as_echo_n "checking for DPMSForceLevel in -lXext... " >&6; } +if test "${ac_cv_lib_Xext_DPMSForceLevel+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXext $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char DPMSForceLevel (); +int +main () +{ +return DPMSForceLevel (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Xext_DPMSForceLevel=yes +else + ac_cv_lib_Xext_DPMSForceLevel=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xext_DPMSForceLevel" >&5 +$as_echo "$ac_cv_lib_Xext_DPMSForceLevel" >&6; } +if test "x$ac_cv_lib_Xext_DPMSForceLevel" = x""yes; then : + $as_echo "#define HAVE_DPMS 1" >>confdefs.h + +fi + + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XTestGrabControl in -lXtst" >&5 +$as_echo_n "checking for XTestGrabControl in -lXtst... " >&6; } +if test "${ac_cv_lib_Xtst_XTestGrabControl+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXtst $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XTestGrabControl (); +int +main () +{ +return XTestGrabControl (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Xtst_XTestGrabControl=yes +else + ac_cv_lib_Xtst_XTestGrabControl=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xtst_XTestGrabControl" >&5 +$as_echo "$ac_cv_lib_Xtst_XTestGrabControl" >&6; } +if test "x$ac_cv_lib_Xtst_XTestGrabControl" = x""yes; then : + X_PRELIBS="-lXtst $X_PRELIBS" + $as_echo "#define HAVE_XTESTGRABCONTROL 1" >>confdefs.h + HAVE_XTESTGRABCONTROL="true" +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XTestFakeKeyEvent in -lXtst" >&5 +$as_echo_n "checking for XTestFakeKeyEvent in -lXtst... " >&6; } +if test "${ac_cv_lib_Xtst_XTestFakeKeyEvent+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXtst $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XTestFakeKeyEvent (); +int +main () +{ +return XTestFakeKeyEvent (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Xtst_XTestFakeKeyEvent=yes +else + ac_cv_lib_Xtst_XTestFakeKeyEvent=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xtst_XTestFakeKeyEvent" >&5 +$as_echo "$ac_cv_lib_Xtst_XTestFakeKeyEvent" >&6; } +if test "x$ac_cv_lib_Xtst_XTestFakeKeyEvent" = x""yes; then : + X_PRELIBS="-lXtst $X_PRELIBS" + $as_echo "#define HAVE_XTEST 1" >>confdefs.h + HAVE_XTEST="true" +fi + + + if test "x$with_xrecord" != "xno"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XRecordEnableContextAsync in -lXtst" >&5 +$as_echo_n "checking for XRecordEnableContextAsync in -lXtst... " >&6; } +if test "${ac_cv_lib_Xtst_XRecordEnableContextAsync+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXtst $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XRecordEnableContextAsync (); +int +main () +{ +return XRecordEnableContextAsync (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Xtst_XRecordEnableContextAsync=yes +else + ac_cv_lib_Xtst_XRecordEnableContextAsync=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xtst_XRecordEnableContextAsync" >&5 +$as_echo "$ac_cv_lib_Xtst_XRecordEnableContextAsync" >&6; } +if test "x$ac_cv_lib_Xtst_XRecordEnableContextAsync" = x""yes; then : + X_PRELIBS="-lXtst $X_PRELIBS" + $as_echo "#define HAVE_RECORD 1" >>confdefs.h + +fi + + fi + + # we use XTRAP on X11R5, or user can set X11VNC_USE_XTRAP + if test "x$with_xtrap" != "xno"; then + if test ! -z "$X11VNC_USE_XTRAP" -o -z "$HAVE_XTESTGRABCONTROL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XETrapSetGrabServer in -lXTrap" >&5 +$as_echo_n "checking for XETrapSetGrabServer in -lXTrap... " >&6; } +if test "${ac_cv_lib_XTrap_XETrapSetGrabServer+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXTrap $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XETrapSetGrabServer (); +int +main () +{ +return XETrapSetGrabServer (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_XTrap_XETrapSetGrabServer=yes +else + ac_cv_lib_XTrap_XETrapSetGrabServer=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_XTrap_XETrapSetGrabServer" >&5 +$as_echo "$ac_cv_lib_XTrap_XETrapSetGrabServer" >&6; } +if test "x$ac_cv_lib_XTrap_XETrapSetGrabServer" = x""yes; then : + X_PRELIBS="$X_PRELIBS -lXTrap" + $as_echo "#define HAVE_LIBXTRAP 1" >>confdefs.h + +fi + + # tru64 uses libXETrap.so + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XETrapSetGrabServer in -lXETrap" >&5 +$as_echo_n "checking for XETrapSetGrabServer in -lXETrap... " >&6; } +if test "${ac_cv_lib_XETrap_XETrapSetGrabServer+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXETrap $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XETrapSetGrabServer (); +int +main () +{ +return XETrapSetGrabServer (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_XETrap_XETrapSetGrabServer=yes +else + ac_cv_lib_XETrap_XETrapSetGrabServer=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_XETrap_XETrapSetGrabServer" >&5 +$as_echo "$ac_cv_lib_XETrap_XETrapSetGrabServer" >&6; } +if test "x$ac_cv_lib_XETrap_XETrapSetGrabServer" = x""yes; then : + X_PRELIBS="$X_PRELIBS -lXETrap" + $as_echo "#define HAVE_LIBXTRAP 1" >>confdefs.h + +fi + + fi + fi + + if test "x$with_xkeyboard" != "xno"; then + saved_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $X_CFLAGS" + ac_fn_c_check_header_compile "$LINENO" "X11/XKBlib.h" "ac_cv_header_X11_XKBlib_h" "#include +" +if test "x$ac_cv_header_X11_XKBlib_h" = x""yes; then : + HAVE_XKBLIB_H="true" +else + HAVE_XKBLIB_H="false" +fi + + + CPPFLAGS="$saved_CPPFLAGS" + if test $HAVE_XKBLIB_H = "true"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XkbSelectEvents in -lX11" >&5 +$as_echo_n "checking for XkbSelectEvents in -lX11... " >&6; } +if test "${ac_cv_lib_X11_XkbSelectEvents+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lX11 $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XkbSelectEvents (); +int +main () +{ +return XkbSelectEvents (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_X11_XkbSelectEvents=yes +else + ac_cv_lib_X11_XkbSelectEvents=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_X11_XkbSelectEvents" >&5 +$as_echo "$ac_cv_lib_X11_XkbSelectEvents" >&6; } +if test "x$ac_cv_lib_X11_XkbSelectEvents" = x""yes; then : + $as_echo "#define HAVE_XKEYBOARD 1" >>confdefs.h + +fi + + fi + fi + + if test "x$with_xinerama" != "xno"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XineramaQueryScreens in -lXinerama" >&5 +$as_echo_n "checking for XineramaQueryScreens in -lXinerama... " >&6; } +if test "${ac_cv_lib_Xinerama_XineramaQueryScreens+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXinerama $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XineramaQueryScreens (); +int +main () +{ +return XineramaQueryScreens (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Xinerama_XineramaQueryScreens=yes +else + ac_cv_lib_Xinerama_XineramaQueryScreens=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xinerama_XineramaQueryScreens" >&5 +$as_echo "$ac_cv_lib_Xinerama_XineramaQueryScreens" >&6; } +if test "x$ac_cv_lib_Xinerama_XineramaQueryScreens" = x""yes; then : + X_PRELIBS="$X_PRELIBS -lXinerama" + $as_echo "#define HAVE_LIBXINERAMA 1" >>confdefs.h + +fi + + fi + + if test "x$with_xrandr" != "xno"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XRRSelectInput in -lXrandr" >&5 +$as_echo_n "checking for XRRSelectInput in -lXrandr... " >&6; } +if test "${ac_cv_lib_Xrandr_XRRSelectInput+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXrandr $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XRRSelectInput (); +int +main () +{ +return XRRSelectInput (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Xrandr_XRRSelectInput=yes +else + ac_cv_lib_Xrandr_XRRSelectInput=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xrandr_XRRSelectInput" >&5 +$as_echo "$ac_cv_lib_Xrandr_XRRSelectInput" >&6; } +if test "x$ac_cv_lib_Xrandr_XRRSelectInput" = x""yes; then : + X_PRELIBS="$X_PRELIBS -lXrandr" + $as_echo "#define HAVE_LIBXRANDR 1" >>confdefs.h + HAVE_LIBXRANDR="true" +fi + + fi + + if test "x$with_xfixes" != "xno"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XFixesGetCursorImage in -lXfixes" >&5 +$as_echo_n "checking for XFixesGetCursorImage in -lXfixes... " >&6; } +if test "${ac_cv_lib_Xfixes_XFixesGetCursorImage+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXfixes $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XFixesGetCursorImage (); +int +main () +{ +return XFixesGetCursorImage (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Xfixes_XFixesGetCursorImage=yes +else + ac_cv_lib_Xfixes_XFixesGetCursorImage=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xfixes_XFixesGetCursorImage" >&5 +$as_echo "$ac_cv_lib_Xfixes_XFixesGetCursorImage" >&6; } +if test "x$ac_cv_lib_Xfixes_XFixesGetCursorImage" = x""yes; then : + X_PRELIBS="$X_PRELIBS -lXfixes" + $as_echo "#define HAVE_LIBXFIXES 1" >>confdefs.h + HAVE_LIBXFIXES="true" +fi + + fi + + if test "x$with_xdamage" != "xno"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XDamageQueryExtension in -lXdamage" >&5 +$as_echo_n "checking for XDamageQueryExtension in -lXdamage... " >&6; } +if test "${ac_cv_lib_Xdamage_XDamageQueryExtension+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXdamage $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char XDamageQueryExtension (); +int +main () +{ +return XDamageQueryExtension (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Xdamage_XDamageQueryExtension=yes +else + ac_cv_lib_Xdamage_XDamageQueryExtension=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xdamage_XDamageQueryExtension" >&5 +$as_echo "$ac_cv_lib_Xdamage_XDamageQueryExtension" >&6; } +if test "x$ac_cv_lib_Xdamage_XDamageQueryExtension" = x""yes; then : + X_PRELIBS="$X_PRELIBS -lXdamage" + $as_echo "#define HAVE_LIBXDAMAGE 1" >>confdefs.h + HAVE_LIBXDAMAGE="true" +fi + + fi + + if test ! -z "$HAVE_LIBXFIXES" -o ! -z "$HAVE_LIBXDAMAGE"; then + # need /usr/sfw/lib in RPATH for Solaris 10 and later + case `(uname -sr) 2>/dev/null` in + "SunOS 5"*) X_EXTRA_LIBS="$X_EXTRA_LIBS -R/usr/sfw/lib" ;; + esac + fi + if test ! -z "$HAVE_LIBXRANDR"; then + # also need /usr/X11/include for Solaris 10 10/08 and later + case `(uname -sr) 2>/dev/null` in + "SunOS 5"*) CPPFLAGS="$CPPFLAGS -I/usr/X11/include" ;; + esac + fi + + X_LIBS="$X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS" + fi + # end x11vnc only. +fi + + + if test $HAVE_X11 != "false"; then + HAVE_X11_TRUE= + HAVE_X11_FALSE='#' +else + HAVE_X11_TRUE='#' + HAVE_X11_FALSE= +fi + + +# x11vnc only: +if test "$build_x11vnc" = "yes"; then + +if test "x$HAVE_X11" = "xfalse" -a "x$with_x" != "xno"; then + as_fn_error $? " +========================================================================== +*** A working X window system build environment is required to build *** +x11vnc. Make sure any required X development packages are installed. +If they are installed in non-standard locations, one can use the +--x-includes=DIR and --x-libraries=DIR configure options or set the +CPPFLAGS and LDFLAGS environment variables to indicate where the X +window system header files and libraries may be found. On 64+32 bit +machines you may need to point to lib64 or lib32 directories to pick up +the correct word size. + +If you want to build x11vnc without X support (e.g. for -rawfb use only +or for native Mac OS X), specify the --without-x configure option. +========================================================================== +" "$LINENO" 5 +fi + +if test "x$HAVE_X11" = "xtrue" -a "x$HAVE_XTEST" != "xtrue"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: +========================================================================== +*** A working build environment for the XTEST extension was not found *** +(libXtst). An x11vnc built this way will be *ONLY BARELY USABLE*. +You will be able to move the mouse but not click or type. There can +also be deadlocks if an application grabs the X server. + +It is recommended that you install the necessary development packages +for XTEST (perhaps it is named something like libxtst-dev) and run +configure again. +========================================================================== +" >&5 +$as_echo "$as_me: WARNING: +========================================================================== +*** A working build environment for the XTEST extension was not found *** +(libXtst). An x11vnc built this way will be *ONLY BARELY USABLE*. +You will be able to move the mouse but not click or type. There can +also be deadlocks if an application grabs the X server. + +It is recommended that you install the necessary development packages +for XTEST (perhaps it is named something like libxtst-dev) and run +configure again. +========================================================================== +" >&2;} + sleep 5 +fi + +if test "x$with_v4l" != "xno"; then + ac_fn_c_check_header_mongrel "$LINENO" "linux/videodev.h" "ac_cv_header_linux_videodev_h" "$ac_includes_default" +if test "x$ac_cv_header_linux_videodev_h" = x""yes; then : + $as_echo "#define HAVE_LINUX_VIDEODEV_H 1" >>confdefs.h + +fi + + +fi +if test "x$with_fbdev" != "xno"; then + ac_fn_c_check_header_mongrel "$LINENO" "linux/fb.h" "ac_cv_header_linux_fb_h" "$ac_includes_default" +if test "x$ac_cv_header_linux_fb_h" = x""yes; then : + $as_echo "#define HAVE_LINUX_FB_H 1" >>confdefs.h + +fi + + +fi +if test "x$with_uinput" != "xno"; then + ac_fn_c_check_header_mongrel "$LINENO" "linux/input.h" "ac_cv_header_linux_input_h" "$ac_includes_default" +if test "x$ac_cv_header_linux_input_h" = x""yes; then : + $as_echo "#define HAVE_LINUX_INPUT_H 1" >>confdefs.h + HAVE_LINUX_INPUT_H="true" +fi + + + if test "x$HAVE_LINUX_INPUT_H" = "xtrue"; then + ac_fn_c_check_header_compile "$LINENO" "linux/uinput.h" "ac_cv_header_linux_uinput_h" "#include +" +if test "x$ac_cv_header_linux_uinput_h" = x""yes; then : + $as_echo "#define HAVE_LINUX_UINPUT_H 1" >>confdefs.h + +fi + + + fi +fi + +if test "x$with_macosx_native" != "xno"; then + $as_echo "#define HAVE_MACOSX_NATIVE_DISPLAY 1" >>confdefs.h + +fi + +# Check for OS X opengl header +ac_fn_c_check_header_mongrel "$LINENO" "OpenGL/OpenGL.h" "ac_cv_header_OpenGL_OpenGL_h" "$ac_includes_default" +if test "x$ac_cv_header_OpenGL_OpenGL_h" = x""yes; then : + $as_echo "#define HAVE_MACOSX_OPENGL_H 1" >>confdefs.h + HAVE_MACOSX_OPENGL_H="true" +fi + + + + + +# Check whether --with-avahi was given. +if test "${with_avahi+set}" = set; then : + withval=$with_avahi; +fi + +if test "x$with_avahi" != "xno"; then + printf "checking for avahi... " + if test ! -z "$with_avahi" -a "x$with_avahi" != "xyes"; then + AVAHI_CFLAGS="-I$with_avahi/include" + AVAHI_LIBS="-L$with_avahi/lib -lavahi-common -lavahi-client" + echo "using $with_avahi" + with_avahi=yes + elif pkg-config --atleast-version=0.6.4 avahi-client >/dev/null 2>&1; then + AVAHI_CFLAGS=`pkg-config --cflags avahi-client` + AVAHI_LIBS=`pkg-config --libs avahi-client` + with_avahi=yes + echo yes + else + with_avahi=no + echo no + fi +fi +if test "x$with_avahi" = "xyes"; then + $as_echo "#define HAVE_AVAHI 1" >>confdefs.h + + + +fi + +fi +# end x11vnc only. + +# only used in x11vnc/Makefile.am but needs to always be defined: + if test "$HAVE_MACOSX_OPENGL_H" = "true"; then + OSX_OPENGL_TRUE= + OSX_OPENGL_FALSE='#' +else + OSX_OPENGL_TRUE='#' + OSX_OPENGL_FALSE= +fi + + +# Checks for libraries. + +if test ! -z "$with_system_libvncserver" -a "x$with_system_libvncserver" != "xno"; then + printf "checking for system libvncserver... " + vneed="0.9.1" + if test "X$VNEED" != "X"; then + vneed=$VNEED + fi + if test "x$with_system_libvncserver" != "xyes"; then + rflag="" + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + rflag="-Xlinker -R$with_system_libvncserver/lib" + else + rflag="-R$with_system_libvncserver/lib" + fi + cmd="$with_system_libvncserver/bin/libvncserver-config" + if $cmd --version 1>/dev/null 2>&1; then + cvers=`$cmd --version 2>/dev/null` + cscore=`echo "$cvers" | tr '.' ' ' | awk '{print 10000 * $1 + 100 * $2 + $3}'` + nscore=`echo "$vneed" | tr '.' ' ' | awk '{print 10000 * $1 + 100 * $2 + $3}'` + + if test $cscore -lt $nscore; then + echo "no" + with_system_libvncserver=no + as_fn_error $? " +========================================================================== +*** Need libvncserver version $vneed, have version $cvers *** +You are building with a system installed libvncserver and it is not +new enough. +========================================================================== +" "$LINENO" 5 + else + SYSTEM_LIBVNCSERVER_CFLAGS="-I$with_system_libvncserver/include" + SYSTEM_LIBVNCSERVER_LIBS="-L$with_system_libvncserver/lib $rflag -lvncserver -lvncclient" + echo "using $with_system_libvncserver" + with_system_libvncserver=yes + fi + else + echo " *** cannot run $cmd *** " 1>&2 + with_system_libvncserver=no + echo no + fi + elif libvncserver-config --version 1>/dev/null 2>&1; then + rflag="" + rprefix=`libvncserver-config --prefix` + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + rflag=" -Xlinker -R$rprefix/lib " + else + rflag=" -R$rprefix/lib " + fi + cvers=`libvncserver-config --version 2>/dev/null` + cscore=`echo "$cvers" | tr '.' ' ' | awk '{print 10000 * $1 + 100 * $2 + $3}'` + nscore=`echo "$vneed" | tr '.' ' ' | awk '{print 10000 * $1 + 100 * $2 + $3}'` + + if test $cscore -lt $nscore; then + echo "no" + as_fn_error $? " +========================================================================== +*** Need libvncserver version $vneed, have version $cvers *** +You are building with a system installed libvncserver and it is not +new enough. +========================================================================== +" "$LINENO" 5 + else + SYSTEM_LIBVNCSERVER_CFLAGS=`libvncserver-config --cflags` + SYSTEM_LIBVNCSERVER_LIBS="$rflag"`libvncserver-config --libs` + with_system_libvncserver=yes + echo yes + fi + else + with_system_libvncserver=no + echo no + fi +fi + +if test "x$with_system_libvncserver" = "xyes"; then + $as_echo "#define HAVE_SYSTEM_LIBVNCSERVER 1" >>confdefs.h + + + +fi + if test "x$with_system_libvncserver" = "xyes"; then + HAVE_SYSTEM_LIBVNCSERVER_TRUE= + HAVE_SYSTEM_LIBVNCSERVER_FALSE='#' +else + HAVE_SYSTEM_LIBVNCSERVER_TRUE='#' + HAVE_SYSTEM_LIBVNCSERVER_FALSE= +fi + + + + +# Check whether --with-jpeg was given. +if test "${with_jpeg+set}" = set; then : + withval=$with_jpeg; +fi + + +# At this point: +# no jpeg on command line with_jpeg="" +# -with-jpeg with_jpeg="yes" +# -without-jpeg with_jpeg="no" +# -with-jpeg=/foo/dir with_jpeg="/foo/dir" + +HAVE_LIBJPEG_TURBO="false" + +if test "x$with_jpeg" != "xno"; then + + saved_CPPFLAGS="$CPPFLAGS" + saved_LDFLAGS="$LDFLAGS" + saved_LIBS="$LIBS" + if test ! -z "$with_jpeg" -a "x$with_jpeg" != "xyes"; then + # add user supplied directory to flags: + CPPFLAGS="$CPPFLAGS -I$with_jpeg/include" + LDFLAGS="$LDFLAGS -L$with_jpeg/lib" + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + # this is not complete... in general a rat's nest. + LDFLAGS="$LDFLAGS -Xlinker -R$with_jpeg/lib" + else + LDFLAGS="$LDFLAGS -R$with_jpeg/lib" + fi + fi + if test "x$JPEG_LDFLAGS" != "x"; then + LDFLAGS="$saved_LDFLAGS" + LIBS="$LIBS $JPEG_LDFLAGS" + else + LIBS="-ljpeg" + fi + ac_fn_c_check_header_mongrel "$LINENO" "jpeglib.h" "ac_cv_header_jpeglib_h" "$ac_includes_default" +if test "x$ac_cv_header_jpeglib_h" = x""yes; then : + HAVE_JPEGLIB_H="true" +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jpeg_CreateCompress in libjpeg" >&5 +$as_echo_n "checking for jpeg_CreateCompress in libjpeg... " >&6; } + if test "x$HAVE_JPEGLIB_H" = "xtrue"; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char jpeg_CreateCompress (); +int +main () +{ +return jpeg_CreateCompress (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; }; + +$as_echo "#define HAVE_LIBJPEG 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; }; HAVE_JPEGLIB_H="" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi + if test "x$HAVE_JPEGLIB_H" != "xtrue"; then + # restore old flags on failure: + CPPFLAGS="$saved_CPPFLAGS" + LDFLAGS="$saved_LDFLAGS" + LIBS="$saved_LIBS" + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: +========================================================================== +*** The libjpeg compression library was not found. *** +This may lead to reduced performance, especially over slow links. +If libjpeg is in a non-standard location use --with-jpeg=DIR to +indicate the header file is in DIR/include/jpeglib.h and the library +in DIR/lib/libjpeg.a. You can also set the JPEG_LDFLAGS variable to +specify more detailed linker flags. A copy of libjpeg-turbo may be +obtained from: https://sourceforge.net/projects/libjpeg-turbo/files/ +A copy of libjpeg may be obtained from: http://ijg.org/files/ +========================================================================== +" >&5 +$as_echo "$as_me: WARNING: +========================================================================== +*** The libjpeg compression library was not found. *** +This may lead to reduced performance, especially over slow links. +If libjpeg is in a non-standard location use --with-jpeg=DIR to +indicate the header file is in DIR/include/jpeglib.h and the library +in DIR/lib/libjpeg.a. You can also set the JPEG_LDFLAGS variable to +specify more detailed linker flags. A copy of libjpeg-turbo may be +obtained from: https://sourceforge.net/projects/libjpeg-turbo/files/ +A copy of libjpeg may be obtained from: http://ijg.org/files/ +========================================================================== +" >&2;} + sleep 5 + fi + + if test "x$HAVE_JPEGLIB_H" = "xtrue"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether JPEG library is libjpeg-turbo" >&5 +$as_echo_n "checking whether JPEG library is libjpeg-turbo... " >&6; } + + if test "x$cross_compiling" != "xyes"; then + if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5 ; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #include +int +main () +{ +struct jpeg_compress_struct cinfo; + struct jpeg_error_mgr jerr; + cinfo.err=jpeg_std_error(&jerr); + jpeg_create_compress(&cinfo); + cinfo.input_components = 3; + jpeg_set_defaults(&cinfo); + cinfo.in_color_space = JCS_EXT_RGB; + jpeg_default_colorspace(&cinfo); + return 0; + ; + return 0; +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + HAVE_LIBJPEG_TURBO="true"; { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #include +int +main () +{ +struct jpeg_compress_struct cinfo; + struct jpeg_error_mgr jerr; + cinfo.err=jpeg_std_error(&jerr); + jpeg_create_compress(&cinfo); + cinfo.input_components = 3; + jpeg_set_defaults(&cinfo); + cinfo.in_color_space = JCS_EXT_RGB; + jpeg_default_colorspace(&cinfo); + return 0; + ; + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + HAVE_LIBJPEG_TURBO="true"; { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi + fi + + if test "x$HAVE_JPEGLIB_H" = "xtrue" -a "x$HAVE_LIBJPEG_TURBO" != "xtrue"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: +========================================================================== +*** The libjpeg library you are building against is not libjpeg-turbo. +Performance will be reduced. You can obtain libjpeg-turbo from: +https://sourceforge.net/projects/libjpeg-turbo/files/ *** +========================================================================== +" >&5 +$as_echo "$as_me: WARNING: +========================================================================== +*** The libjpeg library you are building against is not libjpeg-turbo. +Performance will be reduced. You can obtain libjpeg-turbo from: +https://sourceforge.net/projects/libjpeg-turbo/files/ *** +========================================================================== +" >&2;} + fi + +fi + + +# Check whether --with-png was given. +if test "${with_png+set}" = set; then : + withval=$with_png; +fi + + +# At this point: +# no png on command line with_png="" +# -with-png with_png="yes" +# -without-png with_png="no" +# -with-png=/foo/dir with_png="/foo/dir" + +if test "x$with_png" != "xno"; then + if test ! -z "$with_png" -a "x$with_png" != "xyes"; then + # add user supplied directory to flags: + saved_CPPFLAGS="$CPPFLAGS" + saved_LDFLAGS="$LDFLAGS" + CPPFLAGS="$CPPFLAGS -I$with_png/include" + LDFLAGS="$LDFLAGS -L$with_png/lib" + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + # this is not complete... in general a rat's nest. + LDFLAGS="$LDFLAGS -Xlinker -R$with_png/lib" + else + LDFLAGS="$LDFLAGS -R$with_png/lib" + fi + fi + ac_fn_c_check_header_mongrel "$LINENO" "png.h" "ac_cv_header_png_h" "$ac_includes_default" +if test "x$ac_cv_header_png_h" = x""yes; then : + HAVE_PNGLIB_H="true" +fi + + + if test "x$HAVE_PNGLIB_H" = "xtrue"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for png_create_write_struct in -lpng" >&5 +$as_echo_n "checking for png_create_write_struct in -lpng... " >&6; } +if test "${ac_cv_lib_png_png_create_write_struct+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpng $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char png_create_write_struct (); +int +main () +{ +return png_create_write_struct (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_png_png_create_write_struct=yes +else + ac_cv_lib_png_png_create_write_struct=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_png_png_create_write_struct" >&5 +$as_echo "$ac_cv_lib_png_png_create_write_struct" >&6; } +if test "x$ac_cv_lib_png_png_create_write_struct" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBPNG 1 +_ACEOF + + LIBS="-lpng $LIBS" + +else + HAVE_PNGLIB_H="" +fi + + fi + if test ! -z "$with_png" -a "x$with_png" != "xyes"; then + if test "x$HAVE_PNGLIB_H" != "xtrue"; then + # restore old flags on failure: + CPPFLAGS="$saved_CPPFLAGS" + LDFLAGS="$saved_LDFLAGS" + fi + fi + if test "$build_x11vnc" = "yes"; then + if test "x$HAVE_PNGLIB_H" != "xtrue"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: +========================================================================== +*** The libpng compression library was not found. *** +This may lead to reduced performance, especially over slow links. +If libpng is in a non-standard location use --with-png=DIR to +indicate the header file is in DIR/include/png.h and the library +in DIR/lib/libpng.a. A copy of libpng may be obtained from: +http://www.libpng.org/pub/png/libpng.html +========================================================================== +" >&5 +$as_echo "$as_me: WARNING: +========================================================================== +*** The libpng compression library was not found. *** +This may lead to reduced performance, especially over slow links. +If libpng is in a non-standard location use --with-png=DIR to +indicate the header file is in DIR/include/png.h and the library +in DIR/lib/libpng.a. A copy of libpng may be obtained from: +http://www.libpng.org/pub/png/libpng.html +========================================================================== +" >&2;} + sleep 5 + fi + fi +fi + + +# Check whether --with-libz was given. +if test "${with_libz+set}" = set; then : + withval=$with_libz; +fi + + +# Check whether --with-zlib was given. +if test "${with_zlib+set}" = set; then : + withval=$with_zlib; +fi + + +if test "x$with_zlib" != "xno" -a "x$with_libz" != "xno"; then + if test ! -z "$with_zlib" -a "x$with_zlib" != "xyes"; then + saved_CPPFLAGS="$CPPFLAGS" + saved_LDFLAGS="$LDFLAGS" + CPPFLAGS="$CPPFLAGS -I$with_zlib/include" + LDFLAGS="$LDFLAGS -L$with_zlib/lib" + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + LDFLAGS="$LDFLAGS -Xlinker -R$with_zlib/lib" + else + LDFLAGS="$LDFLAGS -R$with_zlib/lib" + fi + fi + ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default" +if test "x$ac_cv_header_zlib_h" = x""yes; then : + HAVE_ZLIB_H="true" +fi + + + if test "x$HAVE_ZLIB_H" = "xtrue"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for deflate in -lz" >&5 +$as_echo_n "checking for deflate in -lz... " >&6; } +if test "${ac_cv_lib_z_deflate+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lz $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char deflate (); +int +main () +{ +return deflate (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_z_deflate=yes +else + ac_cv_lib_z_deflate=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_deflate" >&5 +$as_echo "$ac_cv_lib_z_deflate" >&6; } +if test "x$ac_cv_lib_z_deflate" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBZ 1 +_ACEOF + + LIBS="-lz $LIBS" + +else + HAVE_ZLIB_H="" +fi + + fi + if test ! -z "$with_zlib" -a "x$with_zlib" != "xyes"; then + if test "x$HAVE_ZLIB_H" != "xtrue"; then + CPPFLAGS="$saved_CPPFLAGS" + LDFLAGS="$saved_LDFLAGS" + fi + fi + if test "$build_x11vnc" = "yes"; then + if test "x$HAVE_ZLIB_H" != "xtrue"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: +========================================================================== +*** The libz compression library was not found. *** +This may lead to reduced performance, especially over slow links. +If libz is in a non-standard location use --with-zlib=DIR to indicate the +header file is in DIR/include/zlib.h and the library in DIR/lib/libz.a. +A copy of libz may be obtained from: http://www.gzip.org/zlib/ +========================================================================== +" >&5 +$as_echo "$as_me: WARNING: +========================================================================== +*** The libz compression library was not found. *** +This may lead to reduced performance, especially over slow links. +If libz is in a non-standard location use --with-zlib=DIR to indicate the +header file is in DIR/include/zlib.h and the library in DIR/lib/libz.a. +A copy of libz may be obtained from: http://www.gzip.org/zlib/ +========================================================================== +" >&2;} + sleep 5 + fi + fi +fi + + +# Check whether --with-pthread was given. +if test "${with_pthread+set}" = set; then : + withval=$with_pthread; +fi + + +if test "x$with_pthread" != "xno"; then + ac_fn_c_check_header_mongrel "$LINENO" "pthread.h" "ac_cv_header_pthread_h" "$ac_includes_default" +if test "x$ac_cv_header_pthread_h" = x""yes; then : + HAVE_PTHREAD_H="true" +fi + + + if test ! -z "$HAVE_PTHREAD_H"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_lock in -lpthread" >&5 +$as_echo_n "checking for pthread_mutex_lock in -lpthread... " >&6; } +if test "${ac_cv_lib_pthread_pthread_mutex_lock+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pthread_mutex_lock (); +int +main () +{ +return pthread_mutex_lock (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_pthread_pthread_mutex_lock=yes +else + ac_cv_lib_pthread_pthread_mutex_lock=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_mutex_lock" >&5 +$as_echo "$ac_cv_lib_pthread_pthread_mutex_lock" >&6; } +if test "x$ac_cv_lib_pthread_pthread_mutex_lock" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBPTHREAD 1 +_ACEOF + + LIBS="-lpthread $LIBS" + +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_lock in -lpthread" >&5 +$as_echo_n "checking for pthread_mutex_lock in -lpthread... " >&6; } +if test "${ac_cv_lib_pthread_pthread_mutex_lock+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pthread_mutex_lock (); +int +main () +{ +return pthread_mutex_lock (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_pthread_pthread_mutex_lock=yes +else + ac_cv_lib_pthread_pthread_mutex_lock=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_mutex_lock" >&5 +$as_echo "$ac_cv_lib_pthread_pthread_mutex_lock" >&6; } +if test "x$ac_cv_lib_pthread_pthread_mutex_lock" = x""yes; then : + HAVE_LIBPTHREAD="true" +fi + + fi +fi + if test ! -z "$HAVE_LIBPTHREAD"; then + HAVE_LIBPTHREAD_TRUE= + HAVE_LIBPTHREAD_FALSE='#' +else + HAVE_LIBPTHREAD_TRUE='#' + HAVE_LIBPTHREAD_FALSE= +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for __thread" >&5 +$as_echo_n "checking for __thread... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +static __thread int p = 0 + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +$as_echo "#define HAVE_TLS 1" >>confdefs.h + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +# tightvnc-filetransfer implemented using threads: +if test -z "$HAVE_LIBPTHREAD"; then + with_tightvnc_filetransfer="" +fi +if test "x$with_tightvnc_filetransfer" = "xyes"; then + $as_echo "#define WITH_TIGHTVNC_FILETRANSFER 1" >>confdefs.h + +fi + if test "$with_tightvnc_filetransfer" = "yes"; then + WITH_TIGHTVNC_FILETRANSFER_TRUE= + WITH_TIGHTVNC_FILETRANSFER_FALSE='#' +else + WITH_TIGHTVNC_FILETRANSFER_TRUE='#' + WITH_TIGHTVNC_FILETRANSFER_FALSE= +fi + + +# websockets implemented using base64 from resolve +if test "x$HAVE_B64" != "xtrue"; then + with_websockets="" +fi +if test "x$with_websockets" = "xyes"; then + LIBS="$LIBS -lresolv $SSL_LIBS" + $as_echo "#define WITH_WEBSOCKETS 1" >>confdefs.h + +fi + if test "$with_websockets" = "yes"; then + WITH_WEBSOCKETS_TRUE= + WITH_WEBSOCKETS_FALSE='#' +else + WITH_WEBSOCKETS_TRUE='#' + WITH_WEBSOCKETS_FALSE= +fi + + + if test ! -z "$HAVE_ZLIB_H"; then + HAVE_LIBZ_TRUE= + HAVE_LIBZ_FALSE='#' +else + HAVE_LIBZ_TRUE='#' + HAVE_LIBZ_FALSE= +fi + + if test ! -z "$HAVE_JPEGLIB_H"; then + HAVE_LIBJPEG_TRUE= + HAVE_LIBJPEG_FALSE='#' +else + HAVE_LIBJPEG_TRUE='#' + HAVE_LIBJPEG_FALSE= +fi + + if test ! -z "$HAVE_PNGLIB_H"; then + HAVE_LIBPNG_TRUE= + HAVE_LIBPNG_FALSE='#' +else + HAVE_LIBPNG_TRUE='#' + HAVE_LIBPNG_FALSE= +fi + + + +SDLCONFIG="sdl-config" + +# Check whether --with-sdl-config was given. +if test "${with_sdl_config+set}" = set; then : + withval=$with_sdl_config; + if test "$withval" != "yes" -a "$withval" != ""; then + SDLCONFIG=$withval + fi + +fi + + +if test -z "$with_sdl"; then + if $SDLCONFIG --version >/dev/null 2>&1; then + with_sdl=yes + SDL_CFLAGS=`$SDLCONFIG --cflags` + SDL_LIBS=`$SDLCONFIG --libs` + else + with_sdl=no + fi +fi + if test "x$with_sdl" = "xyes"; then + HAVE_LIBSDL_TRUE= + HAVE_LIBSDL_FALSE='#' +else + HAVE_LIBSDL_TRUE='#' + HAVE_LIBSDL_FALSE= +fi + + + + + +# Check for GTK+. if present, build the GTK+ vnc viewer example + + + + + + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_PKG_CONFIG+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi +else + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +fi + +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + PKG_CONFIG="" + fi +fi + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5 +$as_echo_n "checking for GTK... " >&6; } + +if test -n "$GTK_CFLAGS"; then + pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gtk+-2.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$GTK_LIBS"; then + pkg_cv_GTK_LIBS="$GTK_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gtk+-2.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-2.0" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gtk+-2.0" 2>&1` + else + GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors "gtk+-2.0" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$GTK_PKG_ERRORS" >&5 + + : +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + : +else + GTK_CFLAGS=$pkg_cv_GTK_CFLAGS + GTK_LIBS=$pkg_cv_GTK_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + if test ! -z "$GTK_LIBS"; then + HAVE_LIBGTK_TRUE= + HAVE_LIBGTK_FALSE='#' +else + HAVE_LIBGTK_TRUE='#' + HAVE_LIBGTK_FALSE= +fi + + + +MINGW=`echo $host_os | grep mingw32 2>/dev/null` + if test ! -z "$MINGW" ; then + MINGW_TRUE= + MINGW_FALSE='#' +else + MINGW_TRUE='#' + MINGW_FALSE= +fi + +if test ! -z "$MINGW"; then + WSOCKLIB="-lws2_32" + LDFLAGS="$LDFLAGS -no-undefined" +fi + + +# Check for libgcrypt + + +# Check whether --with-gcrypt was given. +if test "${with_gcrypt+set}" = set; then : + withval=$with_gcrypt; +fi + + +# Check whether --with-client-gcrypt was given. +if test "${with_client_gcrypt+set}" = set; then : + withval=$with_client_gcrypt; +fi + + +if test "x$with_gcrypt" != "xno"; then + +# Check whether --with-libgcrypt-prefix was given. +if test "${with_libgcrypt_prefix+set}" = set; then : + withval=$with_libgcrypt_prefix; libgcrypt_config_prefix="$withval" +else + libgcrypt_config_prefix="" +fi + + if test x$libgcrypt_config_prefix != x ; then + if test x${LIBGCRYPT_CONFIG+set} != xset ; then + LIBGCRYPT_CONFIG=$libgcrypt_config_prefix/bin/libgcrypt-config + fi + fi + + # Extract the first word of "libgcrypt-config", so it can be a program name with args. +set dummy libgcrypt-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_LIBGCRYPT_CONFIG+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + case $LIBGCRYPT_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_LIBGCRYPT_CONFIG="$LIBGCRYPT_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_LIBGCRYPT_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_path_LIBGCRYPT_CONFIG" && ac_cv_path_LIBGCRYPT_CONFIG="no" + ;; +esac +fi +LIBGCRYPT_CONFIG=$ac_cv_path_LIBGCRYPT_CONFIG +if test -n "$LIBGCRYPT_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBGCRYPT_CONFIG" >&5 +$as_echo "$LIBGCRYPT_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + tmp=1.4.0 + if echo "$tmp" | grep ':' >/dev/null 2>/dev/null ; then + req_libgcrypt_api=`echo "$tmp" | sed 's/\(.*\):\(.*\)/\1/'` + min_libgcrypt_version=`echo "$tmp" | sed 's/\(.*\):\(.*\)/\2/'` + else + req_libgcrypt_api=0 + min_libgcrypt_version="$tmp" + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBGCRYPT - version >= $min_libgcrypt_version" >&5 +$as_echo_n "checking for LIBGCRYPT - version >= $min_libgcrypt_version... " >&6; } + ok=no + if test "$LIBGCRYPT_CONFIG" != "no" ; then + req_major=`echo $min_libgcrypt_version | \ + sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\)/\1/'` + req_minor=`echo $min_libgcrypt_version | \ + sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\)/\2/'` + req_micro=`echo $min_libgcrypt_version | \ + sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\)/\3/'` + libgcrypt_config_version=`$LIBGCRYPT_CONFIG --version` + major=`echo $libgcrypt_config_version | \ + sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*/\1/'` + minor=`echo $libgcrypt_config_version | \ + sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*/\2/'` + micro=`echo $libgcrypt_config_version | \ + sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*/\3/'` + if test "$major" -gt "$req_major"; then + ok=yes + else + if test "$major" -eq "$req_major"; then + if test "$minor" -gt "$req_minor"; then + ok=yes + else + if test "$minor" -eq "$req_minor"; then + if test "$micro" -ge "$req_micro"; then + ok=yes + fi + fi + fi + fi + fi + fi + if test $ok = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes ($libgcrypt_config_version)" >&5 +$as_echo "yes ($libgcrypt_config_version)" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + if test $ok = yes; then + # If we have a recent libgcrypt, we should also check that the + # API is compatible + if test "$req_libgcrypt_api" -gt 0 ; then + tmp=`$LIBGCRYPT_CONFIG --api-version 2>/dev/null || echo 0` + if test "$tmp" -gt 0 ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking LIBGCRYPT API version" >&5 +$as_echo_n "checking LIBGCRYPT API version... " >&6; } + if test "$req_libgcrypt_api" -eq "$tmp" ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: okay" >&5 +$as_echo "okay" >&6; } + else + ok=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: does not match. want=$req_libgcrypt_api got=$tmp" >&5 +$as_echo "does not match. want=$req_libgcrypt_api got=$tmp" >&6; } + fi + fi + fi + fi + if test $ok = yes; then + LIBGCRYPT_CFLAGS=`$LIBGCRYPT_CONFIG --cflags` + LIBGCRYPT_LIBS=`$LIBGCRYPT_CONFIG --libs` + : + else + LIBGCRYPT_CFLAGS="" + LIBGCRYPT_LIBS="" + with_client_gcrypt=no + fi + + + + CFLAGS="$CFLAGS $LIBGCRYPT_CFLAGS" + LIBS="$LIBS $LIBGCRYPT_LIBS" + if test "x$with_client_gcrypt" != "xno"; then + $as_echo "#define WITH_CLIENT_GCRYPT 1" >>confdefs.h + + fi +fi + +# Checks for GnuTLS + + +# Check whether --with-gnutls was given. +if test "${with_gnutls+set}" = set; then : + withval=$with_gnutls; +fi + + +if test "x$with_gnutls" != "xno"; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNUTLS" >&5 +$as_echo_n "checking for GNUTLS... " >&6; } + +if test -n "$GNUTLS_CFLAGS"; then + pkg_cv_GNUTLS_CFLAGS="$GNUTLS_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnutls >= 2.4.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gnutls >= 2.4.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GNUTLS_CFLAGS=`$PKG_CONFIG --cflags "gnutls >= 2.4.0" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$GNUTLS_LIBS"; then + pkg_cv_GNUTLS_LIBS="$GNUTLS_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnutls >= 2.4.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gnutls >= 2.4.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GNUTLS_LIBS=`$PKG_CONFIG --libs "gnutls >= 2.4.0" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + GNUTLS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gnutls >= 2.4.0" 2>&1` + else + GNUTLS_PKG_ERRORS=`$PKG_CONFIG --print-errors "gnutls >= 2.4.0" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$GNUTLS_PKG_ERRORS" >&5 + + : +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + : +else + GNUTLS_CFLAGS=$pkg_cv_GNUTLS_CFLAGS + GNUTLS_LIBS=$pkg_cv_GNUTLS_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + CFLAGS="$CFLAGS $GNUTLS_CFLAGS" + LIBS="$LIBS $GNUTLS_LIBS" +fi + if test ! -z "$GNUTLS_LIBS"; then + HAVE_GNUTLS_TRUE= + HAVE_GNUTLS_FALSE='#' +else + HAVE_GNUTLS_TRUE='#' + HAVE_GNUTLS_FALSE= +fi + +if test ! -z "$GNUTLS_LIBS" ; then + $as_echo "#define HAVE_GNUTLS 1" >>confdefs.h + +fi + + +# warn if neither GnuTLS nor OpenSSL are available +if test -z "$SSL_LIBS" -a -z "$GNUTLS_LIBS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: +========================================================================== +*** No encryption library could be found. *** +A libvncserver/libvncclient built this way will not support SSL encryption. +To enable SSL install the necessary development packages (perhaps it is named +something like libssl-dev or gnutls-dev) and run configure again. +========================================================================== +" >&5 +$as_echo "$as_me: WARNING: +========================================================================== +*** No encryption library could be found. *** +A libvncserver/libvncclient built this way will not support SSL encryption. +To enable SSL install the necessary development packages (perhaps it is named +something like libssl-dev or gnutls-dev) and run configure again. +========================================================================== +" >&2;} + sleep 5 +fi + + +# IPv6 + + +# Check whether --with-ipv6 was given. +if test "${with_ipv6+set}" = set; then : + withval=$with_ipv6; +fi + +if test "x$with_ipv6" != "xno"; then + ac_fn_c_check_func "$LINENO" "getaddrinfo" "ac_cv_func_getaddrinfo" +if test "x$ac_cv_func_getaddrinfo" = x""yes; then : + $as_echo "#define IPv6 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for getaddrinfo in -lsocket" >&5 +$as_echo_n "checking for getaddrinfo in -lsocket... " >&6; } +if test "${ac_cv_lib_socket_getaddrinfo+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsocket $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char getaddrinfo (); +int +main () +{ +return getaddrinfo (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_socket_getaddrinfo=yes +else + ac_cv_lib_socket_getaddrinfo=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_getaddrinfo" >&5 +$as_echo "$ac_cv_lib_socket_getaddrinfo" >&6; } +if test "x$ac_cv_lib_socket_getaddrinfo" = x""yes; then : + $as_echo "#define IPv6 1" >>confdefs.h + +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for getaddrinfo in -lws2_32" >&5 +$as_echo_n "checking for getaddrinfo in -lws2_32... " >&6; } + LIBS="$LIBS -lws2_32" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +getaddrinfo(0, 0, 0, 0); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + $as_echo "#define IPv6 1" >>confdefs.h + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +fi + +fi + +fi + + + +# Checks for header files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if test "${ac_cv_header_stdc+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +for ac_header in arpa/inet.h fcntl.h netdb.h netinet/in.h stdlib.h string.h sys/socket.h sys/time.h sys/timeb.h syslog.h unistd.h ws2tcpip.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +# x11vnc only: +if test "$build_x11vnc" = "yes"; then + for ac_header in pwd.h sys/wait.h utmpx.h termios.h sys/ioctl.h sys/stropts.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +fi + +# Checks for typedefs, structures, and compiler characteristics. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if test "${ac_cv_c_const+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +/* FIXME: Include the comments suggested by Paul. */ +#ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; + const charset cs; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes +else + ac_cv_c_const=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +$as_echo "#define const /**/" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 +$as_echo_n "checking for inline... " >&6; } +if test "${ac_cv_c_inline+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_c_inline=no +for ac_kw in inline __inline__ __inline; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifndef __cplusplus +typedef int foo_t; +static $ac_kw foo_t static_foo () {return 0; } +$ac_kw foo_t foo () {return 0; } +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_inline=$ac_kw +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test "$ac_cv_c_inline" != no && break +done + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 +$as_echo "$ac_cv_c_inline" >&6; } + +case $ac_cv_c_inline in + inline | yes) ;; + *) + case $ac_cv_c_inline in + no) ac_val=;; + *) ac_val=$ac_cv_c_inline;; + esac + cat >>confdefs.h <<_ACEOF +#ifndef __cplusplus +#define inline $ac_val +#endif +_ACEOF + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 +$as_echo_n "checking whether byte ordering is bigendian... " >&6; } +if test "${ac_cv_c_bigendian+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_c_bigendian=unknown + # See if we're dealing with a universal compiler. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifndef __APPLE_CC__ + not a universal capable compiler + #endif + typedef int dummy; + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + # Check for potential -arch flags. It is not universal unless + # there are at least two -arch flags with different values. + ac_arch= + ac_prev= + for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do + if test -n "$ac_prev"; then + case $ac_word in + i?86 | x86_64 | ppc | ppc64) + if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then + ac_arch=$ac_word + else + ac_cv_c_bigendian=universal + break + fi + ;; + esac + ac_prev= + elif test "x$ac_word" = "x-arch"; then + ac_prev=arch + fi + done +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if test $ac_cv_c_bigendian = unknown; then + # See if sys/param.h defines the BYTE_ORDER macro. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #include + +int +main () +{ +#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ + && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ + && LITTLE_ENDIAN) + bogus endian macros + #endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + # It does; now see whether it defined to BIG_ENDIAN or not. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #include + +int +main () +{ +#if BYTE_ORDER != BIG_ENDIAN + not big endian + #endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_bigendian=yes +else + ac_cv_c_bigendian=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +int +main () +{ +#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) + bogus endian macros + #endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + # It does; now see whether it defined to _BIG_ENDIAN or not. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +int +main () +{ +#ifndef _BIG_ENDIAN + not big endian + #endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_bigendian=yes +else + ac_cv_c_bigendian=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # Compile a test program. + if test "$cross_compiling" = yes; then : + # Try to guess by grepping values from an object file. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +short int ascii_mm[] = + { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; + short int ascii_ii[] = + { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; + int use_ascii (int i) { + return ascii_mm[i] + ascii_ii[i]; + } + short int ebcdic_ii[] = + { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; + short int ebcdic_mm[] = + { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; + int use_ebcdic (int i) { + return ebcdic_mm[i] + ebcdic_ii[i]; + } + extern int foo; + +int +main () +{ +return use_ascii (foo) == use_ebcdic (foo); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then + ac_cv_c_bigendian=yes + fi + if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi + fi +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ + + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long int l; + char c[sizeof (long int)]; + } u; + u.l = 1; + return u.c[sizeof (long int) - 1] == 1; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_c_bigendian=no +else + ac_cv_c_bigendian=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 +$as_echo "$ac_cv_c_bigendian" >&6; } + case $ac_cv_c_bigendian in #( + yes) + $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h +;; #( + no) + ;; #( + universal) + +$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h + + ;; #( + *) + as_fn_error $? "unknown endianness + presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; + esac + +ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" +if test "x$ac_cv_type_size_t" = x""yes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define size_t unsigned int +_ACEOF + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 +$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } +if test "${ac_cv_header_time+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include + +int +main () +{ +if ((struct tm *) 0) +return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_time=yes +else + ac_cv_header_time=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 +$as_echo "$ac_cv_header_time" >&6; } +if test $ac_cv_header_time = yes; then + +$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys/wait.h that is POSIX.1 compatible" >&5 +$as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; } +if test "${ac_cv_header_sys_wait_h+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#ifndef WEXITSTATUS +# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8) +#endif +#ifndef WIFEXITED +# define WIFEXITED(stat_val) (((stat_val) & 255) == 0) +#endif + +int +main () +{ + int s; + wait (&s); + s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_sys_wait_h=yes +else + ac_cv_header_sys_wait_h=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_wait_h" >&5 +$as_echo "$ac_cv_header_sys_wait_h" >&6; } +if test $ac_cv_header_sys_wait_h = yes; then + +$as_echo "#define HAVE_SYS_WAIT_H 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for socklen_t" >&5 +$as_echo_n "checking for socklen_t... " >&6; } +if test "${ac_cv_type_socklen_t+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #include +int +main () +{ +socklen_t len = 42; return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_type_socklen_t=yes +else + ac_cv_type_socklen_t=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_socklen_t" >&5 +$as_echo "$ac_cv_type_socklen_t" >&6; } + if test $ac_cv_type_socklen_t != yes; then + $as_echo "#define socklen_t int" >>confdefs.h + + fi + +if test ! -d ./rfb; then + echo "creating subdir ./rfb for rfbint.h" + mkdir ./rfb +fi +# ------ AC CREATE STDINT H ------------------------------------- +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdint-types...." >&5 +$as_echo_n "checking for stdint-types....... " >&6; } +ac_stdint_h=`echo rfb/rfbint.h` +if test "$ac_stdint_h" = "stdint.h" ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: \"(are you sure you want them in ./stdint.h?)\"" >&5 +$as_echo "\"(are you sure you want them in ./stdint.h?)\"" >&6; } +elif test "$ac_stdint_h" = "inttypes.h" ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: \"(are you sure you want them in ./inttypes.h?)\"" >&5 +$as_echo "\"(are you sure you want them in ./inttypes.h?)\"" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: \"(putting them into $ac_stdint_h)\"" >&5 +$as_echo "\"(putting them into $ac_stdint_h)\"" >&6; } +fi + +inttype_headers=`echo inttypes.h sys/inttypes.h sys/inttypes.h \ +| sed -e 's/,/ /g'` + + ac_cv_header_stdint_x="no-file" + ac_cv_header_stdint_o="no-file" + ac_cv_header_stdint_u="no-file" + for i in stdint.h $inttype_headers ; do + unset ac_cv_type_uintptr_t + unset ac_cv_type_uint64_t + ac_fn_c_check_type "$LINENO" "uintptr_t" "ac_cv_type_uintptr_t" "#include <$i> +" +if test "x$ac_cv_type_uintptr_t" = x""yes; then : + ac_cv_header_stdint_x=$i +else + continue +fi + + ac_fn_c_check_type "$LINENO" "uint64_t" "ac_cv_type_uint64_t" "#include<$i> +" +if test "x$ac_cv_type_uint64_t" = x""yes; then : + and64="(uint64_t too)" +else + and64="" +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ... seen our uintptr_t in $i $and64" >&5 +$as_echo "... seen our uintptr_t in $i $and64" >&6; } + break; + done + if test "$ac_cv_header_stdint_x" = "no-file" ; then + for i in stdint.h $inttype_headers ; do + unset ac_cv_type_uint32_t + unset ac_cv_type_uint64_t + ac_fn_c_check_type "$LINENO" "uint32_t" "ac_cv_type_uint32_t" "#include <$i> +" +if test "x$ac_cv_type_uint32_t" = x""yes; then : + ac_cv_header_stdint_o=$i +else + continue +fi + + ac_fn_c_check_type "$LINENO" "uint64_t" "ac_cv_type_uint64_t" "#include<$i> +" +if test "x$ac_cv_type_uint64_t" = x""yes; then : + and64="(uint64_t too)" +else + and64="" +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ... seen our uint32_t in $i $and64" >&5 +$as_echo "... seen our uint32_t in $i $and64" >&6; } + break; + done + if test "$ac_cv_header_stdint_o" = "no-file" ; then + for i in sys/types.h $inttype_headers ; do + unset ac_cv_type_u_int32_t + unset ac_cv_type_u_int64_t + ac_fn_c_check_type "$LINENO" "u_int32_t" "ac_cv_type_u_int32_t" "#include <$i> +" +if test "x$ac_cv_type_u_int32_t" = x""yes; then : + ac_cv_header_stdint_u=$i +else + continue +fi + + ac_fn_c_check_type "$LINENO" "uint64_t" "ac_cv_type_uint64_t" "#include<$i> +" +if test "x$ac_cv_type_uint64_t" = x""yes; then : + and64="(u_int64_t too)" +else + and64="" +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ... seen our u_int32_t in $i $and64" >&5 +$as_echo "... seen our u_int32_t in $i $and64" >&6; } + break; + done + fi + fi + +# ----------------- DONE inttypes.h checks MAYBE C basic types -------- + +if test "$ac_cv_header_stdint_x" = "no-file" ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of char" >&5 +$as_echo_n "checking size of char... " >&6; } +if test "${ac_cv_sizeof_char+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "confdefs.h" +#include + + +int +main () +{ +switch (0) case 0: case (sizeof (char) == $ac_size):; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sizeof_char=$ac_size +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if test x$ac_cv_sizeof_char != x ; then break; fi +done + +fi + +if test x$ac_cv_sizeof_char = x ; then + as_fn_error $? "cannot determine a size for char" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_char" >&5 +$as_echo "$ac_cv_sizeof_char" >&6; } + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_CHAR $ac_cv_sizeof_char +_ACEOF + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of short" >&5 +$as_echo_n "checking size of short... " >&6; } +if test "${ac_cv_sizeof_short+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "confdefs.h" +#include + + +int +main () +{ +switch (0) case 0: case (sizeof (short) == $ac_size):; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sizeof_short=$ac_size +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if test x$ac_cv_sizeof_short != x ; then break; fi +done + +fi + +if test x$ac_cv_sizeof_short = x ; then + as_fn_error $? "cannot determine a size for short" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_short" >&5 +$as_echo "$ac_cv_sizeof_short" >&6; } + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_SHORT $ac_cv_sizeof_short +_ACEOF + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5 +$as_echo_n "checking size of int... " >&6; } +if test "${ac_cv_sizeof_int+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "confdefs.h" +#include + + +int +main () +{ +switch (0) case 0: case (sizeof (int) == $ac_size):; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sizeof_int=$ac_size +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if test x$ac_cv_sizeof_int != x ; then break; fi +done + +fi + +if test x$ac_cv_sizeof_int = x ; then + as_fn_error $? "cannot determine a size for int" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int" >&5 +$as_echo "$ac_cv_sizeof_int" >&6; } + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_INT $ac_cv_sizeof_int +_ACEOF + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5 +$as_echo_n "checking size of long... " >&6; } +if test "${ac_cv_sizeof_long+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "confdefs.h" +#include + + +int +main () +{ +switch (0) case 0: case (sizeof (long) == $ac_size):; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sizeof_long=$ac_size +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if test x$ac_cv_sizeof_long != x ; then break; fi +done + +fi + +if test x$ac_cv_sizeof_long = x ; then + as_fn_error $? "cannot determine a size for long" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5 +$as_echo "$ac_cv_sizeof_long" >&6; } + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_LONG $ac_cv_sizeof_long +_ACEOF + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of void*" >&5 +$as_echo_n "checking size of void*... " >&6; } +if test "${ac_cv_sizeof_voidp+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include "confdefs.h" +#include + + +int +main () +{ +switch (0) case 0: case (sizeof (void*) == $ac_size):; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sizeof_voidp=$ac_size +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if test x$ac_cv_sizeof_voidp != x ; then break; fi +done + +fi + +if test x$ac_cv_sizeof_voidp = x ; then + as_fn_error $? "cannot determine a size for void*" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_voidp" >&5 +$as_echo "$ac_cv_sizeof_voidp" >&6; } + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_VOIDP $ac_cv_sizeof_voidp +_ACEOF + + + ac_cv_header_stdint_test="yes" +else + ac_cv_header_stdint_test="no" +fi + +# ----------------- DONE inttypes.h checks START header ------------- +_ac_stdint_h=`$as_echo "_$ac_stdint_h" | $as_tr_cpp` +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: creating $ac_stdint_h : $_ac_stdint_h" >&5 +$as_echo "creating $ac_stdint_h : $_ac_stdint_h" >&6; } +echo "#ifndef" $_ac_stdint_h >$ac_stdint_h +echo "#define" $_ac_stdint_h "1" >>$ac_stdint_h +echo "#ifndef" _GENERATED_STDINT_H >>$ac_stdint_h +echo "#define" _GENERATED_STDINT_H '"'$PACKAGE $VERSION'"' >>$ac_stdint_h +if test "$GCC" = "yes" ; then + echo "/* generated using a gnu compiler version" `$CC --version` "*/" \ + >>$ac_stdint_h +else + echo "/* generated using $CC */" >>$ac_stdint_h +fi +echo "" >>$ac_stdint_h + +if test "$ac_cv_header_stdint_x" != "no-file" ; then + ac_cv_header_stdint="$ac_cv_header_stdint_x" +elif test "$ac_cv_header_stdint_o" != "no-file" ; then + ac_cv_header_stdint="$ac_cv_header_stdint_o" +elif test "$ac_cv_header_stdint_u" != "no-file" ; then + ac_cv_header_stdint="$ac_cv_header_stdint_u" +else + ac_cv_header_stdint="stddef.h" +fi + +# ----------------- See if int_least and int_fast types are present +unset ac_cv_type_int_least32_t +unset ac_cv_type_int_fast32_t +ac_fn_c_check_type "$LINENO" "int_least32_t" "ac_cv_type_int_least32_t" "#include <$ac_cv_header_stdint> +" +if test "x$ac_cv_type_int_least32_t" = x""yes; then : + +fi + +ac_fn_c_check_type "$LINENO" "int_fast32_t" "ac_cv_type_int_fast32_t" "#include<$ac_cv_header_stdint> +" +if test "x$ac_cv_type_int_fast32_t" = x""yes; then : + +fi + + +if test "$ac_cv_header_stdint" != "stddef.h" ; then +if test "$ac_cv_header_stdint" != "stdint.h" ; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ..adding include stddef.h" >&5 +$as_echo "..adding include stddef.h" >&6; } + echo "#include " >>$ac_stdint_h +fi ; fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ..adding include $ac_cv_header_stdint" >&5 +$as_echo "..adding include $ac_cv_header_stdint" >&6; } + echo "#include <$ac_cv_header_stdint>" >>$ac_stdint_h +echo "" >>$ac_stdint_h + +# ----------------- DONE header START basic int types ------------- +if test "$ac_cv_header_stdint_x" = "no-file" ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ... need to look at C basic types" >&5 +$as_echo "... need to look at C basic types" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ... seen good stdint.h inttypes" >&5 +$as_echo "... seen good stdint.h inttypes" >&6; } +fi + +if test "$ac_cv_header_stdint_u" != "no-file" ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ... seen bsd/sysv typedefs" >&5 +$as_echo "... seen bsd/sysv typedefs" >&6; } + cat >>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <&5 +$as_echo "..adding $t normal 16-bit system" >&6; } + cat >>$ac_stdint_h <&5 +$as_echo "..adding $t 32-bit system derived from a 16-bit" >&6; } + cat >>$ac_stdint_h <&5 +$as_echo "..adding $t normal 32-bit system" >&6; } + cat >>$ac_stdint_h <&5 +$as_echo "..adding $t 32-bit system prepared for 64-bit" >&6; } + cat >>$ac_stdint_h <&5 +$as_echo "..adding $t normal 64-bit system" >&6; } + cat >>$ac_stdint_h <&5 +$as_echo "..adding $t 64-bit system derived from a 32-bit" >&6; } + cat >>$ac_stdint_h <&5 +$as_echo "... seen good uint64_t" >&6; } + cat >>$ac_stdint_h <&5 +$as_echo "..adding typedef u_int64_t uint64_t" >&6; } + cat >>$ac_stdint_h <&5 +$as_echo "..adding generic uint64_t runtime checks" >&6; } + cat >>$ac_stdint_h < 199901L + +#ifndef _HAVE_UINT64_T +#define _HAVE_UINT64_T +typedef long long int64_t; +typedef unsigned long long uint64_t; +#endif + +#elif !defined __STRICT_ANSI__ +#if defined _MSC_VER || defined __WATCOMC__ || defined __BORLANDC__ + +#ifndef _HAVE_UINT64_T +#define _HAVE_UINT64_T +typedef __int64 int64_t; +typedef unsigned __int64 uint64_t; +#endif + +#elif defined __GNUC__ || defined __MWERKS__ || defined __ELF__ + +#if !defined _NO_LONGLONG +#ifndef _HAVE_UINT64_T +#define _HAVE_UINT64_T +typedef long long int64_t; +typedef unsigned long long uint64_t; +#endif +#endif + +#elif defined __alpha || (defined __mips && defined _ABIN32) + +#if !defined _NO_LONGLONG +#ifndef _HAVE_UINT64_T +#define _HAVE_UINT64_T +typedef long int64_t; +typedef unsigned long uint64_t; +#endif +#endif + /* compiler/cpu type ... or just ISO C99 */ +#endif +#endif +EOF + +# plus a default 64-bit for systems that are likely to be 64-bit ready + case "$ac_cv_sizeof_x:$ac_cv_sizeof_voidp:$ac_cv_sizeof_long" in + 1:2:8:8) { $as_echo "$as_me:${as_lineno-$LINENO}: result: ..adding uint64_t default" >&5 +$as_echo "..adding uint64_t default" >&6; } +cat >>$ac_stdint_h <&5 +$as_echo "..adding uint64_t default" >&6; } +cat >>$ac_stdint_h <&5 +$as_echo "..adding uint64_t default" >&6; } +cat >>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <>$ac_stdint_h <&5 +$as_echo "..adding typedef $a intptr_t" >&6; } +fi + +# ------------- DONE intptr types START int_least types ------------ +if test "$ac_cv_type_int_least32_t" = "no"; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ..adding generic int_least-types" >&5 +$as_echo "..adding generic int_least-types" >&6; } + cat >>$ac_stdint_h <&5 +$as_echo "..adding generic int_fast-types" >&6; } + cat >>$ac_stdint_h <>$ac_stdint_h <&5 +$as_echo "... DONE $ac_stdint_h" >&6; } + cat >>$ac_stdint_h <&5 +$as_echo_n "checking for in_addr_t... " >&6; } +if test "${vnc_cv_inaddrt+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +int +main () +{ +in_addr_t foo; return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + inaddrt=yes +else + inaddrt=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext, + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $vnc_cv_inaddrt" >&5 +$as_echo "$vnc_cv_inaddrt" >&6; } + +if test $inaddrt = no ; then + $as_echo "#define NEED_INADDR_T 1" >>confdefs.h + +fi +# Checks for library functions. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working memcmp" >&5 +$as_echo_n "checking for working memcmp... " >&6; } +if test "${ac_cv_func_memcmp_working+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_memcmp_working=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ + + /* Some versions of memcmp are not 8-bit clean. */ + char c0 = '\100', c1 = '\200', c2 = '\201'; + if (memcmp(&c0, &c2, 1) >= 0 || memcmp(&c1, &c2, 1) >= 0) + return 1; + + /* The Next x86 OpenStep bug shows up only when comparing 16 bytes + or more and with at least one buffer not starting on a 4-byte boundary. + William Lewis provided this test program. */ + { + char foo[21]; + char bar[21]; + int i; + for (i = 0; i < 4; i++) + { + char *a = foo + i; + char *b = bar + i; + strcpy (a, "--------01111111"); + strcpy (b, "--------10000000"); + if (memcmp (a, b, 16) >= 0) + return 1; + } + return 0; + } + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_memcmp_working=yes +else + ac_cv_func_memcmp_working=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_memcmp_working" >&5 +$as_echo "$ac_cv_func_memcmp_working" >&6; } +test $ac_cv_func_memcmp_working = no && case " $LIBOBJS " in + *" memcmp.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS memcmp.$ac_objext" + ;; +esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether lstat correctly handles trailing slash" >&5 +$as_echo_n "checking whether lstat correctly handles trailing slash... " >&6; } +if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + rm -f conftest.sym conftest.file +echo >conftest.file +if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then + if test "$cross_compiling" = yes; then : + ac_cv_func_lstat_dereferences_slashed_symlink=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +struct stat sbuf; + /* Linux will dereference the symlink and fail, as required by POSIX. + That is better in the sense that it means we will not + have to compile and use the lstat wrapper. */ + return lstat ("conftest.sym/", &sbuf) == 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_lstat_dereferences_slashed_symlink=yes +else + ac_cv_func_lstat_dereferences_slashed_symlink=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +else + # If the `ln -s' command failed, then we probably don't even + # have an lstat function. + ac_cv_func_lstat_dereferences_slashed_symlink=no +fi +rm -f conftest.sym conftest.file + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 +$as_echo "$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; } + +test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && + +cat >>confdefs.h <<_ACEOF +#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 +_ACEOF + + +if test "x$ac_cv_func_lstat_dereferences_slashed_symlink" = xno; then + case " $LIBOBJS " in + *" lstat.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS lstat.$ac_objext" + ;; +esac + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat accepts an empty string" >&5 +$as_echo_n "checking whether stat accepts an empty string... " >&6; } +if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_stat_empty_string_bug=yes +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +struct stat sbuf; + return stat ("", &sbuf) == 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_stat_empty_string_bug=no +else + ac_cv_func_stat_empty_string_bug=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_stat_empty_string_bug" >&5 +$as_echo "$ac_cv_func_stat_empty_string_bug" >&6; } +if test $ac_cv_func_stat_empty_string_bug = yes; then + case " $LIBOBJS " in + *" stat.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS stat.$ac_objext" + ;; +esac + + +cat >>confdefs.h <<_ACEOF +#define HAVE_STAT_EMPTY_STRING_BUG 1 +_ACEOF + +fi + +for ac_func in strftime +do : + ac_fn_c_check_func "$LINENO" "strftime" "ac_cv_func_strftime" +if test "x$ac_cv_func_strftime" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_STRFTIME 1 +_ACEOF + +else + # strftime is in -lintl on SCO UNIX. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for strftime in -lintl" >&5 +$as_echo_n "checking for strftime in -lintl... " >&6; } +if test "${ac_cv_lib_intl_strftime+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lintl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char strftime (); +int +main () +{ +return strftime (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_intl_strftime=yes +else + ac_cv_lib_intl_strftime=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_strftime" >&5 +$as_echo "$ac_cv_lib_intl_strftime" >&6; } +if test "x$ac_cv_lib_intl_strftime" = x""yes; then : + $as_echo "#define HAVE_STRFTIME 1" >>confdefs.h + +LIBS="-lintl $LIBS" +fi + +fi +done + +for ac_func in vprintf +do : + ac_fn_c_check_func "$LINENO" "vprintf" "ac_cv_func_vprintf" +if test "x$ac_cv_func_vprintf" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_VPRINTF 1 +_ACEOF + +ac_fn_c_check_func "$LINENO" "_doprnt" "ac_cv_func__doprnt" +if test "x$ac_cv_func__doprnt" = x""yes; then : + +$as_echo "#define HAVE_DOPRNT 1" >>confdefs.h + +fi + +fi +done + + +ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default" +if test "x$ac_cv_type_pid_t" = x""yes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define pid_t int +_ACEOF + +fi + +for ac_header in vfork.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default" +if test "x$ac_cv_header_vfork_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_VFORK_H 1 +_ACEOF + +fi + +done + +for ac_func in fork vfork +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + +if test "x$ac_cv_func_fork" = xyes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5 +$as_echo_n "checking for working fork... " >&6; } +if test "${ac_cv_func_fork_works+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_fork_works=cross +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ + + /* By Ruediger Kuhlmann. */ + return fork () < 0; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_fork_works=yes +else + ac_cv_func_fork_works=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5 +$as_echo "$ac_cv_func_fork_works" >&6; } + +else + ac_cv_func_fork_works=$ac_cv_func_fork +fi +if test "x$ac_cv_func_fork_works" = xcross; then + case $host in + *-*-amigaos* | *-*-msdosdjgpp*) + # Override, as these systems have only a dummy fork() stub + ac_cv_func_fork_works=no + ;; + *) + ac_cv_func_fork_works=yes + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 +$as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} +fi +ac_cv_func_vfork_works=$ac_cv_func_vfork +if test "x$ac_cv_func_vfork" = xyes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5 +$as_echo_n "checking for working vfork... " >&6; } +if test "${ac_cv_func_vfork_works+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_vfork_works=cross +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Thanks to Paul Eggert for this test. */ +$ac_includes_default +#include +#ifdef HAVE_VFORK_H +# include +#endif +/* On some sparc systems, changes by the child to local and incoming + argument registers are propagated back to the parent. The compiler + is told about this with #include , but some compilers + (e.g. gcc -O) don't grok . Test for this by using a + static variable whose address is put into a register that is + clobbered by the vfork. */ +static void +#ifdef __cplusplus +sparc_address_test (int arg) +# else +sparc_address_test (arg) int arg; +#endif +{ + static pid_t child; + if (!child) { + child = vfork (); + if (child < 0) { + perror ("vfork"); + _exit(2); + } + if (!child) { + arg = getpid(); + write(-1, "", 0); + _exit (arg); + } + } +} + +int +main () +{ + pid_t parent = getpid (); + pid_t child; + + sparc_address_test (0); + + child = vfork (); + + if (child == 0) { + /* Here is another test for sparc vfork register problems. This + test uses lots of local variables, at least as many local + variables as main has allocated so far including compiler + temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris + 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should + reuse the register of parent for one of the local variables, + since it will think that parent can't possibly be used any more + in this routine. Assigning to the local variable will thus + munge parent in the parent process. */ + pid_t + p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), + p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); + /* Convince the compiler that p..p7 are live; otherwise, it might + use the same hardware register for all 8 local variables. */ + if (p != p1 || p != p2 || p != p3 || p != p4 + || p != p5 || p != p6 || p != p7) + _exit(1); + + /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent + from child file descriptors. If the child closes a descriptor + before it execs or exits, this munges the parent's descriptor + as well. Test for this by closing stdout in the child. */ + _exit(close(fileno(stdout)) != 0); + } else { + int status; + struct stat st; + + while (wait(&status) != child) + ; + return ( + /* Was there some problem with vforking? */ + child < 0 + + /* Did the child fail? (This shouldn't happen.) */ + || status + + /* Did the vfork/compiler bug occur? */ + || parent != getpid() + + /* Did the file descriptor bug occur? */ + || fstat(fileno(stdout), &st) != 0 + ); + } +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_vfork_works=yes +else + ac_cv_func_vfork_works=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5 +$as_echo "$ac_cv_func_vfork_works" >&6; } + +fi; +if test "x$ac_cv_func_fork_works" = xcross; then + ac_cv_func_vfork_works=$ac_cv_func_vfork + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 +$as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} +fi + +if test "x$ac_cv_func_vfork_works" = xyes; then + +$as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h + +else + +$as_echo "#define vfork fork" >>confdefs.h + +fi +if test "x$ac_cv_func_fork_works" = xyes; then + +$as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5 +$as_echo_n "checking for gethostbyname in -lnsl... " >&6; } +if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lnsl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char gethostbyname (); +int +main () +{ +return gethostbyname (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_nsl_gethostbyname=yes +else + ac_cv_lib_nsl_gethostbyname=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5 +$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; } +if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBNSL 1 +_ACEOF + + LIBS="-lnsl $LIBS" + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for socket in -lsocket" >&5 +$as_echo_n "checking for socket in -lsocket... " >&6; } +if test "${ac_cv_lib_socket_socket+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsocket $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char socket (); +int +main () +{ +return socket (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_socket_socket=yes +else + ac_cv_lib_socket_socket=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_socket" >&5 +$as_echo "$ac_cv_lib_socket_socket" >&6; } +if test "x$ac_cv_lib_socket_socket" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBSOCKET 1 +_ACEOF + + LIBS="-lsocket $LIBS" + +fi + + +uname_s=`(uname -s) 2>/dev/null` +if test "x$uname_s" = "xHP-UX"; then + # need -lsec for getspnam() + LDFLAGS="$LDFLAGS -lsec" +fi + +for ac_func in ftime gethostbyname gethostname gettimeofday inet_ntoa memmove memset mmap mkfifo select socket strchr strcspn strdup strerror strstr +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + +# x11vnc only: +if test "$build_x11vnc" = "yes"; then + for ac_func in setsid setpgrp getpwuid getpwnam getspnam getuid geteuid setuid setgid seteuid setegid initgroups waitpid setutxent grantpt shmat +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + +fi + +# check, if shmget is in cygipc.a +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for shmget in -lcygipc" >&5 +$as_echo_n "checking for shmget in -lcygipc... " >&6; } +if test "${ac_cv_lib_cygipc_shmget+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lcygipc $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shmget (); +int +main () +{ +return shmget (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_cygipc_shmget=yes +else + ac_cv_lib_cygipc_shmget=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_cygipc_shmget" >&5 +$as_echo "$ac_cv_lib_cygipc_shmget" >&6; } +if test "x$ac_cv_lib_cygipc_shmget" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBCYGIPC 1 +_ACEOF + + LIBS="-lcygipc $LIBS" + +fi + + if test "$HAVE_CYGIPC" = "true"; then + CYGIPC_TRUE= + CYGIPC_FALSE='#' +else + CYGIPC_TRUE='#' + CYGIPC_FALSE= +fi + + +# Check if /usr/include/linux exists, if so, define LINUX + if test -d /usr/include/linux; then + LINUX_TRUE= + LINUX_FALSE='#' +else + LINUX_TRUE='#' + LINUX_FALSE= +fi + + +# Check for OS X specific header +ac_fn_c_check_header_mongrel "$LINENO" "ApplicationServices/ApplicationServices.h" "ac_cv_header_ApplicationServices_ApplicationServices_h" "$ac_includes_default" +if test "x$ac_cv_header_ApplicationServices_ApplicationServices_h" = x""yes; then : + HAVE_OSX="true" +fi + + + if test "$HAVE_OSX" = "true"; then + OSX_TRUE= + OSX_FALSE='#' +else + OSX_TRUE='#' + OSX_FALSE= +fi + + +# Check for Android specific header +ac_fn_c_check_header_mongrel "$LINENO" "android/api-level.h" "ac_cv_header_android_api_level_h" "$ac_includes_default" +if test "x$ac_cv_header_android_api_level_h" = x""yes; then : + HAVE_ANDROID="true" +fi + + + if test "$HAVE_ANDROID" = "true"; then + ANDROID_TRUE= + ANDROID_FALSE='#' +else + ANDROID_TRUE='#' + ANDROID_FALSE= +fi + +if test "$HAVE_ANDROID" = "true"; then + +$as_echo "#define HAVE_ANDROID 1" >>confdefs.h + +fi + +# On Solaris 2.7, write() returns ENOENT when it really means EAGAIN + +case `(uname -sr) 2>/dev/null` in + "SunOS 5.7") + $as_echo "#define ENOENT_WORKAROUND 1" >>confdefs.h + + ;; +esac + +# Check for rpm SOURCES path +printf "checking for rpm sources path... " +RPMSOURCEDIR="NOT-FOUND" +for directory in packages OpenLinux redhat RedHat rpm RPM "" ; do + if test -d /usr/src/${directory}/SOURCES; then + RPMSOURCEDIR="/usr/src/${directory}/SOURCES/" + fi +done +echo "$RPMSOURCEDIR" + if test "$RPMSOURCEDIR" != "NOT-FOUND"; then + HAVE_RPM_TRUE= + HAVE_RPM_FALSE='#' +else + HAVE_RPM_TRUE='#' + HAVE_RPM_FALSE= +fi + + if test "$build_x11vnc" = "yes"; then + WITH_X11VNC_TRUE= + WITH_X11VNC_FALSE='#' +else + WITH_X11VNC_TRUE='#' + WITH_X11VNC_FALSE= +fi + + + +ac_config_files="$ac_config_files Makefile libvncserver.pc libvncclient.pc libvncserver/Makefile examples/Makefile examples/android/Makefile vncterm/Makefile webclients/Makefile webclients/java-applet/Makefile webclients/java-applet/ssl/Makefile libvncclient/Makefile client_examples/Makefile test/Makefile libvncserver-config LibVNCServer.spec" + +# +# x11vnc only: +# +if test "$build_x11vnc" = "yes"; then + # + # NOTE: if you are using the LibVNCServer-X.Y.Z.tar.gz source + # tarball and nevertheless want to run autoconf (i.e. aclocal, + # autoheader, automake, autoconf) AGAIN (perhaps you have a + # special target system, e.g. embedded) then you will need to + # comment out the following 'AC_CONFIG_FILES' line to avoid + # automake error messages like: + # + # configure.ac:690: required file `x11vnc/Makefile.in' not found + # + ac_config_files="$ac_config_files x11vnc/Makefile x11vnc/misc/Makefile x11vnc/misc/turbovnc/Makefile" + + + if test ! -z "$with_system_libvncserver" -a "x$with_system_libvncserver" != "xno"; then + # need to move local tarball rfb headers aside: + hdrs="rfb.h rfbclient.h rfbproto.h rfbregion.h rfbint.h" + echo "with-system-libvncserver: moving aside headers $hdrs" + for hdr in $hdrs + do + if test -f "rfb/$hdr"; then + echo "with-system-libvncserver: moving rfb/$hdr to rfb/$hdr.ORIG" + mv rfb/$hdr rfb/$hdr.ORIG + fi + done + echo "with-system-libvncserver: *NOTE* move them back manually to start over." + fi +fi + +ac_config_commands="$ac_config_commands chmod-libvncserver-config" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${WITH_FFMPEG_TRUE}" && test -z "${WITH_FFMPEG_FALSE}"; then + as_fn_error $? "conditional \"WITH_FFMPEG\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_MP3LAME_TRUE}" && test -z "${HAVE_MP3LAME_FALSE}"; then + as_fn_error $? "conditional \"HAVE_MP3LAME\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBSSL_TRUE}" && test -z "${HAVE_LIBSSL_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBSSL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_X11_TRUE}" && test -z "${HAVE_X11_FALSE}"; then + as_fn_error $? "conditional \"HAVE_X11\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${OSX_OPENGL_TRUE}" && test -z "${OSX_OPENGL_FALSE}"; then + as_fn_error $? "conditional \"OSX_OPENGL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_SYSTEM_LIBVNCSERVER_TRUE}" && test -z "${HAVE_SYSTEM_LIBVNCSERVER_FALSE}"; then + as_fn_error $? "conditional \"HAVE_SYSTEM_LIBVNCSERVER\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBPTHREAD_TRUE}" && test -z "${HAVE_LIBPTHREAD_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBPTHREAD\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${WITH_TIGHTVNC_FILETRANSFER_TRUE}" && test -z "${WITH_TIGHTVNC_FILETRANSFER_FALSE}"; then + as_fn_error $? "conditional \"WITH_TIGHTVNC_FILETRANSFER\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${WITH_WEBSOCKETS_TRUE}" && test -z "${WITH_WEBSOCKETS_FALSE}"; then + as_fn_error $? "conditional \"WITH_WEBSOCKETS\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBZ_TRUE}" && test -z "${HAVE_LIBZ_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBZ\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBJPEG_TRUE}" && test -z "${HAVE_LIBJPEG_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBJPEG\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBPNG_TRUE}" && test -z "${HAVE_LIBPNG_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBPNG\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBSDL_TRUE}" && test -z "${HAVE_LIBSDL_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBSDL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBGTK_TRUE}" && test -z "${HAVE_LIBGTK_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBGTK\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${MINGW_TRUE}" && test -z "${MINGW_FALSE}"; then + as_fn_error $? "conditional \"MINGW\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_GNUTLS_TRUE}" && test -z "${HAVE_GNUTLS_FALSE}"; then + as_fn_error $? "conditional \"HAVE_GNUTLS\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +if test -z "${CYGIPC_TRUE}" && test -z "${CYGIPC_FALSE}"; then + as_fn_error $? "conditional \"CYGIPC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${LINUX_TRUE}" && test -z "${LINUX_FALSE}"; then + as_fn_error $? "conditional \"LINUX\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${OSX_TRUE}" && test -z "${OSX_FALSE}"; then + as_fn_error $? "conditional \"OSX\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${ANDROID_TRUE}" && test -z "${ANDROID_FALSE}"; then + as_fn_error $? "conditional \"ANDROID\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_RPM_TRUE}" && test -z "${HAVE_RPM_FALSE}"; then + as_fn_error $? "conditional \"HAVE_RPM\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${WITH_X11VNC_TRUE}" && test -z "${WITH_X11VNC_FALSE}"; then + as_fn_error $? "conditional \"WITH_X11VNC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: ${CONFIG_STATUS=./config.status} +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in #( + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by LibVNCServer $as_me 0.9.9, which was +generated by GNU Autoconf 2.67. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +LibVNCServer config.status 0.9.9 +configured by $0, generated by GNU Autoconf 2.67, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2010 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +PACKAGE="$PACKAGE" +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "rfbconfig.h") CONFIG_HEADERS="$CONFIG_HEADERS rfbconfig.h" ;; + "rfb/rfbconfig.h") CONFIG_COMMANDS="$CONFIG_COMMANDS rfb/rfbconfig.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "libvncserver.pc") CONFIG_FILES="$CONFIG_FILES libvncserver.pc" ;; + "libvncclient.pc") CONFIG_FILES="$CONFIG_FILES libvncclient.pc" ;; + "libvncserver/Makefile") CONFIG_FILES="$CONFIG_FILES libvncserver/Makefile" ;; + "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; + "examples/android/Makefile") CONFIG_FILES="$CONFIG_FILES examples/android/Makefile" ;; + "vncterm/Makefile") CONFIG_FILES="$CONFIG_FILES vncterm/Makefile" ;; + "webclients/Makefile") CONFIG_FILES="$CONFIG_FILES webclients/Makefile" ;; + "webclients/java-applet/Makefile") CONFIG_FILES="$CONFIG_FILES webclients/java-applet/Makefile" ;; + "webclients/java-applet/ssl/Makefile") CONFIG_FILES="$CONFIG_FILES webclients/java-applet/ssl/Makefile" ;; + "libvncclient/Makefile") CONFIG_FILES="$CONFIG_FILES libvncclient/Makefile" ;; + "client_examples/Makefile") CONFIG_FILES="$CONFIG_FILES client_examples/Makefile" ;; + "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; + "libvncserver-config") CONFIG_FILES="$CONFIG_FILES libvncserver-config" ;; + "LibVNCServer.spec") CONFIG_FILES="$CONFIG_FILES LibVNCServer.spec" ;; + "x11vnc/Makefile") CONFIG_FILES="$CONFIG_FILES x11vnc/Makefile" ;; + "x11vnc/misc/Makefile") CONFIG_FILES="$CONFIG_FILES x11vnc/misc/Makefile" ;; + "x11vnc/misc/turbovnc/Makefile") CONFIG_FILES="$CONFIG_FILES x11vnc/misc/turbovnc/Makefile" ;; + "chmod-libvncserver-config") CONFIG_COMMANDS="$CONFIG_COMMANDS chmod-libvncserver-config" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_t=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_t"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "rfb/rfbconfig.h":C) ac_prefix_conf_OUT=`echo rfb/rfbconfig.h` +ac_prefix_conf_DEF=`echo _$ac_prefix_conf_OUT | sed -e "y:abcdefghijklmnopqrstuvwxyz:ABCDEFGHIJKLMNOPQRSTUVWXYZ:" -e "s/[^abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g"` +ac_prefix_conf_PKG=`echo $PACKAGE` +ac_prefix_conf_LOW=`echo _$ac_prefix_conf_PKG | sed -e "y:ABCDEFGHIJKLMNOPQRSTUVWXYZ-:abcdefghijklmnopqrstuvwxyz_:"` +ac_prefix_conf_UPP=`echo $ac_prefix_conf_PKG | sed -e "y:abcdefghijklmnopqrstuvwxyz-:ABCDEFGHIJKLMNOPQRSTUVWXYZ_:" -e "/^[0123456789]/s/^/_/"` +ac_prefix_conf_INP=`echo _` +if test "$ac_prefix_conf_INP" = "_"; then + for ac_file in : $CONFIG_HEADERS; do test "_$ac_file" = _: && continue + test -f "$ac_prefix_conf_INP" && continue + case $ac_file in + *.h) test -f $ac_file && ac_prefix_conf_INP=$ac_file ;; + *) + esac + done +fi +if test "$ac_prefix_conf_INP" = "_"; then + case "$ac_prefix_conf_OUT" in + */*) ac_prefix_conf_INP=`basename "$ac_prefix_conf_OUT"` + ;; + *-*) ac_prefix_conf_INP=`echo "$ac_prefix_conf_OUT" | sed -e "s/[abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_]*-//"` + ;; + *) ac_prefix_conf_INP=config.h + ;; + esac +fi +if test -z "$ac_prefix_conf_PKG" ; then + as_fn_error $? "no prefix for _PREFIX_PKG_CONFIG_H" "$LINENO" 5 +else + if test ! -f "$ac_prefix_conf_INP" ; then if test -f "$srcdir/$ac_prefix_conf_INP" ; then + ac_prefix_conf_INP="$srcdir/$ac_prefix_conf_INP" + fi fi + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_prefix_conf_OUT - prefix $ac_prefix_conf_UPP for $ac_prefix_conf_INP defines" >&5 +$as_echo "$as_me: creating $ac_prefix_conf_OUT - prefix $ac_prefix_conf_UPP for $ac_prefix_conf_INP defines" >&6;} + if test -f $ac_prefix_conf_INP ; then + echo "s/#undef *\\([ABCDEFGHIJKLMNOPQRSTUVWXYZ_]\\)/#undef $ac_prefix_conf_UPP""_\\1/" > conftest.prefix + # no! these are things like socklen_t, const, vfork + # echo "s/#undef *\\([m4_cr_letters]\\)/#undef $_LOW""_\\1/" >> _script + echo "s/#define *\\([ABCDEFGHIJKLMNOPQRSTUVWXYZ_][abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_]*\\)\\(.*\\)/#ifndef $ac_prefix_conf_UPP""_\\1 \\" >> conftest.prefix + echo "#define $ac_prefix_conf_UPP""_\\1 \\2 \\" >> conftest.prefix + echo "#endif/" >>conftest.prefix + # no! these are things like socklen_t, const, vfork + # echo "s/#def[]ine *\\([m4_cr_letters][_symbol]*\\)\\(.*\\)/#ifndef $_LOW""_\\1 \\" >> _script + # echo "#define $_LOW""_\\1 \\2 \\" >> _script + # echo "#endif/" >> _script + # now executing _script on _DEF input to create _OUT output file + echo "#ifndef $ac_prefix_conf_DEF" >$tmp/pconfig.h + echo "#define $ac_prefix_conf_DEF 1" >>$tmp/pconfig.h + echo ' ' >>$tmp/pconfig.h + echo /'*' $ac_prefix_conf_OUT. Generated automatically at end of configure. '*'/ >>$tmp/pconfig.h + + sed -f conftest.prefix $ac_prefix_conf_INP >>$tmp/pconfig.h + echo ' ' >>$tmp/pconfig.h + echo '/* once:' $ac_prefix_conf_DEF '*/' >>$tmp/pconfig.h + echo "#endif" >>$tmp/pconfig.h + if cmp -s $ac_prefix_conf_OUT $tmp/pconfig.h 2>/dev/null; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_prefix_conf_OUT is unchanged" >&5 +$as_echo "$as_me: $ac_prefix_conf_OUT is unchanged" >&6;} + else + ac_dir=`$as_dirname -- "$ac_prefix_conf_OUT" || +$as_expr X"$ac_prefix_conf_OUT" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_prefix_conf_OUT" : 'X\(//\)[^/]' \| \ + X"$ac_prefix_conf_OUT" : 'X\(//\)$' \| \ + X"$ac_prefix_conf_OUT" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_prefix_conf_OUT" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + rm -f "$ac_prefix_conf_OUT" + mv $tmp/pconfig.h "$ac_prefix_conf_OUT" + fi + cp conftest.prefix _configs.sed + else + as_fn_error $? "input file $ac_prefix_conf_INP does not exist - skip generating $ac_prefix_conf_OUT" "$LINENO" 5 + fi + rm -f conftest.* +fi + ;; + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "chmod-libvncserver-config":C) chmod a+x libvncserver-config ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + +chmod a+x ./libvncserver-config + diff --git a/jni/vnc/LibVNCServer-0.9.9/configure.ac b/jni/vnc/LibVNCServer-0.9.9/configure.ac new file mode 100644 index 0000000..2eaa46a --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/configure.ac @@ -0,0 +1,1015 @@ +# Process this file with autoconf to produce a configure script. +AC_INIT(LibVNCServer, 0.9.9, http://sourceforge.net/projects/libvncserver) +AM_INIT_AUTOMAKE(LibVNCServer, 0.9.9) +m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) +AM_CONFIG_HEADER(rfbconfig.h) +AX_PREFIX_CONFIG_H([rfb/rfbconfig.h]) + +# Checks for programs. +AC_PROG_CC +AM_PROG_CC_C_O +if test -z "$CC"; then + CCLD="\$(CC)" +else + CCLD="$CC" +fi +test "x$GCC" = "xyes" && CFLAGS="$CFLAGS -Wall" +AC_PROG_MAKE_SET +AC_LIBTOOL_WIN32_DLL +AC_PROG_LIBTOOL +AC_PATH_PROG([AR], [ar], [/usr/bin/ar], + [$PATH:/usr/ccs/bin]) + +# Options +AH_TEMPLATE(WITH_TIGHTVNC_FILETRANSFER, [Disable TightVNCFileTransfer protocol]) +AC_ARG_WITH(tightvnc-filetransfer, + [ --without-filetransfer disable TightVNC file transfer protocol], + , [ with_tightvnc_filetransfer=yes ]) +# AC_DEFINE moved to after libpthread check. + +# WebSockets support +AC_CHECK_LIB(resolv, __b64_ntop, HAVE_B64="true", HAVE_B64="false") +AH_TEMPLATE(WITH_WEBSOCKETS, [Disable WebSockets support]) +AC_ARG_WITH(websockets, + [ --without-websockets disable WebSockets support], + , [ with_websockets=yes ]) +# AC_DEFINE moved to after libresolve check. + +AH_TEMPLATE(ALLOW24BPP, [Enable 24 bit per pixel in native framebuffer]) +AC_ARG_WITH(24bpp, + [ --without-24bpp disable 24 bpp framebuffers], + , [ with_24bpp=yes ]) +if test "x$with_24bpp" = "xyes"; then + AC_DEFINE(ALLOW24BPP) +fi +AH_TEMPLATE(FFMPEG, [Use ffmpeg (for vnc2mpg)]) +AC_ARG_WITH(ffmpeg, + [ --with-ffmpeg=dir set ffmpeg home directory],,) +AC_SUBST(with_ffmpeg) +AM_CONDITIONAL(WITH_FFMPEG, test ! -z "$with_ffmpeg") +if test ! -z "$with_ffmpeg"; then + AC_CHECK_LIB(mp3lame, lame_init, HAVE_MP3LAME="true", HAVE_MP3LAME="false" ) +fi +AM_CONDITIONAL(HAVE_MP3LAME, test "$HAVE_MP3LAME" = "true") + +# Seem to need this dummy here to induce the 'checking for egrep... grep -E', etc. +# before it seemed to be inside the with_jpeg conditional. +AC_CHECK_HEADER(thenonexistentheader.h, HAVE_THENONEXISTENTHEADER_H="true") + +# set some ld -R nonsense +# +uname_s=`(uname -s) 2>/dev/null` +ld_minus_R="yes" +if test "x$uname_s" = "xHP-UX"; then + ld_minus_R="no" +elif test "x$uname_s" = "xOSF1"; then + ld_minus_R="no" +elif test "x$uname_s" = "xDarwin"; then + ld_minus_R="no" +fi + +# Check for OpenSSL +AH_TEMPLATE(HAVE_LIBCRYPT, [libcrypt library present]) +AC_ARG_WITH(crypt, +[ --without-crypt disable support for libcrypt],,) +if test "x$with_crypt" != "xno"; then + AC_CHECK_FUNCS([crypt], HAVE_LIBC_CRYPT="true") + if test -z "$HAVE_LIBC_CRYPT"; then + AC_CHECK_LIB(crypt, crypt, + CRYPT_LIBS="-lcrypt" + [AC_DEFINE(HAVE_LIBCRYPT)], ,) + fi +fi +AC_SUBST(CRYPT_LIBS) + +# some OS's need both -lssl and -lcrypto on link line: +AH_TEMPLATE(HAVE_LIBCRYPTO, [openssl libcrypto library present]) +AC_ARG_WITH(crypto, +[ --without-crypto disable support for openssl libcrypto],,) + +AH_TEMPLATE(HAVE_LIBSSL, [openssl libssl library present]) +AC_ARG_WITH(ssl, +[ --without-ssl disable support for openssl libssl] +[ --with-ssl=DIR use openssl include/library files in DIR],,) + +if test "x$with_crypto" != "xno" -a "x$with_ssl" != "xno"; then + if test ! -z "$with_ssl" -a "x$with_ssl" != "xyes"; then + saved_CPPFLAGS="$CPPFLAGS" + saved_LDFLAGS="$LDFLAGS" + CPPFLAGS="$CPPFLAGS -I$with_ssl/include" + LDFLAGS="$LDFLAGS -L$with_ssl/lib" + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + LDFLAGS="$LDFLAGS -Xlinker -R$with_ssl/lib" + else + LDFLAGS="$LDFLAGS -R$with_ssl/lib" + fi + fi + AC_CHECK_LIB(crypto, RAND_file_name, + [AC_DEFINE(HAVE_LIBCRYPTO) HAVE_LIBCRYPTO="true"], ,) + if test ! -z "$with_ssl" -a "x$with_ssl" != "xyes"; then + if test "x$HAVE_LIBCRYPTO" != "xtrue"; then + CPPFLAGS="$saved_CPPFLAGS" + LDFLAGS="$saved_LDFLAGS" + fi + fi +fi + +AH_TEMPLATE(HAVE_X509_PRINT_EX_FP, [open ssl X509_print_ex_fp available]) +if test "x$with_ssl" != "xno"; then + if test "x$HAVE_LIBCRYPTO" = "xtrue"; then + AC_CHECK_LIB(ssl, SSL_library_init, + SSL_LIBS="-lssl -lcrypto" + [AC_DEFINE(HAVE_LIBSSL) HAVE_LIBSSL="true"], , + -lcrypto) + else + AC_CHECK_LIB(ssl, SSL_library_init, + SSL_LIBS="-lssl" + [AC_DEFINE(HAVE_LIBSSL) HAVE_LIBSSL="true"], ,) + fi +fi +AC_SUBST(SSL_LIBS) +AM_CONDITIONAL(HAVE_LIBSSL, test ! -z "$SSL_LIBS") + +# Checks for X libraries +HAVE_X11="false" +AC_PATH_XTRA +AH_TEMPLATE(HAVE_X11, [X11 build environment present]) + +# See if we are to build x11vnc: +AH_TEMPLATE(HAVE_SYSTEM_LIBVNCSERVER, [Use the system libvncserver build environment for x11vnc.]) +AC_ARG_WITH(system-libvncserver, +[ --with-system-libvncserver use installed libvncserver for x11vnc] +[ --with-system-libvncserver=DIR use libvncserver installed in DIR for x11vnc],,) +AC_ARG_WITH(x11vnc, +[ --with-x11vnc configure for building the x11vnc subdir (if present)] +[ you will need to cd to x11vnc and run 'make' etc.],,) + +if test ! -z "$with_x11vnc" -a "$with_x11vnc" = "yes"; then + build_x11vnc="yes" +elif test "$PACKAGE_NAME" = "x11vnc"; then + build_x11vnc="yes" +else + build_x11vnc="no" +fi + +# x11vnc only: +if test "$build_x11vnc" = "yes"; then + +AH_TEMPLATE(HAVE_XSHM, [MIT-SHM extension build environment present]) +AH_TEMPLATE(HAVE_XTEST, [XTEST extension build environment present]) +AH_TEMPLATE(HAVE_XTESTGRABCONTROL, [XTEST extension has XTestGrabControl]) +AH_TEMPLATE(HAVE_XKEYBOARD, [XKEYBOARD extension build environment present]) +AH_TEMPLATE(HAVE_LIBXINERAMA, [XINERAMA extension build environment present]) +AH_TEMPLATE(HAVE_LIBXRANDR, [XRANDR extension build environment present]) +AH_TEMPLATE(HAVE_LIBXFIXES, [XFIXES extension build environment present]) +AH_TEMPLATE(HAVE_LIBXDAMAGE, [XDAMAGE extension build environment present]) +AH_TEMPLATE(HAVE_LIBXTRAP, [DEC-XTRAP extension build environment present]) +AH_TEMPLATE(HAVE_RECORD, [RECORD extension build environment present]) +AH_TEMPLATE(HAVE_SOLARIS_XREADSCREEN, [Solaris XReadScreen available]) +AH_TEMPLATE(HAVE_IRIX_XREADDISPLAY, [IRIX XReadDisplay available]) +AH_TEMPLATE(HAVE_FBPM, [FBPM extension build environment present]) +AH_TEMPLATE(HAVE_DPMS, [DPMS extension build environment present]) +AH_TEMPLATE(HAVE_LINUX_VIDEODEV_H, [video4linux build environment present]) +AH_TEMPLATE(HAVE_LINUX_FB_H, [linux fb device build environment present]) +AH_TEMPLATE(HAVE_LINUX_INPUT_H, [linux/input.h present]) +AH_TEMPLATE(HAVE_LINUX_UINPUT_H, [linux uinput device build environment present]) +AH_TEMPLATE(HAVE_MACOSX_NATIVE_DISPLAY, [build MacOS X native display support]) +AH_TEMPLATE(HAVE_MACOSX_OPENGL_H, [MacOS X OpenGL present]) + +AC_ARG_WITH(xkeyboard, +[ --without-xkeyboard disable xkeyboard extension support],,) +AC_ARG_WITH(xinerama, +[ --without-xinerama disable xinerama extension support],,) +AC_ARG_WITH(xrandr, +[ --without-xrandr disable xrandr extension support],,) +AC_ARG_WITH(xfixes, +[ --without-xfixes disable xfixes extension support],,) +AC_ARG_WITH(xdamage, +[ --without-xdamage disable xdamage extension support],,) +AC_ARG_WITH(xtrap, +[ --without-xtrap disable xtrap extension support],,) +AC_ARG_WITH(xrecord, +[ --without-xrecord disable xrecord extension support],,) +AC_ARG_WITH(fbpm, +[ --without-fbpm disable fbpm extension support],,) +AC_ARG_WITH(dpms, +[ --without-dpms disable dpms extension support],,) +AC_ARG_WITH(v4l, +[ --without-v4l disable video4linux support],,) +AC_ARG_WITH(fbdev, +[ --without-fbdev disable linux fb device support],,) +AC_ARG_WITH(uinput, +[ --without-uinput disable linux uinput device support],,) +AC_ARG_WITH(macosx-native, +[ --without-macosx-native disable MacOS X native display support],,) + +fi +# end x11vnc only. + +if test "x$with_x" = "xno"; then + HAVE_X11="false" +elif test "$X_CFLAGS" != "-DX_DISPLAY_MISSING"; then + AC_CHECK_LIB(X11, XGetImage, [AC_DEFINE(HAVE_X11) HAVE_X11="true"], + HAVE_X11="false", + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + + # x11vnc only: + if test $HAVE_X11 = "true" -a "$build_x11vnc" = "yes"; then + X_PRELIBS="$X_PRELIBS -lXext" + + AC_CHECK_LIB(Xext, XShmGetImage, + [AC_DEFINE(HAVE_XSHM)], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + + AC_CHECK_LIB(Xext, XReadScreen, + [AC_DEFINE(HAVE_SOLARIS_XREADSCREEN)], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + + AC_CHECK_HEADER(X11/extensions/readdisplay.h, + [AC_DEFINE(HAVE_IRIX_XREADDISPLAY)], , + [#include ]) + + if test "x$with_fbpm" != "xno"; then + AC_CHECK_LIB(Xext, FBPMForceLevel, + [AC_DEFINE(HAVE_FBPM)], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + fi + + if test "x$with_dpms" != "xno"; then + AC_CHECK_LIB(Xext, DPMSForceLevel, + [AC_DEFINE(HAVE_DPMS)], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + fi + + AC_CHECK_LIB(Xtst, XTestGrabControl, + X_PRELIBS="-lXtst $X_PRELIBS" + [AC_DEFINE(HAVE_XTESTGRABCONTROL) HAVE_XTESTGRABCONTROL="true"], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + + AC_CHECK_LIB(Xtst, XTestFakeKeyEvent, + X_PRELIBS="-lXtst $X_PRELIBS" + [AC_DEFINE(HAVE_XTEST) HAVE_XTEST="true"], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + + if test "x$with_xrecord" != "xno"; then + AC_CHECK_LIB(Xtst, XRecordEnableContextAsync, + X_PRELIBS="-lXtst $X_PRELIBS" + [AC_DEFINE(HAVE_RECORD)], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + fi + + # we use XTRAP on X11R5, or user can set X11VNC_USE_XTRAP + if test "x$with_xtrap" != "xno"; then + if test ! -z "$X11VNC_USE_XTRAP" -o -z "$HAVE_XTESTGRABCONTROL"; then + AC_CHECK_LIB(XTrap, XETrapSetGrabServer, + X_PRELIBS="$X_PRELIBS -lXTrap" + [AC_DEFINE(HAVE_LIBXTRAP)], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + # tru64 uses libXETrap.so + AC_CHECK_LIB(XETrap, XETrapSetGrabServer, + X_PRELIBS="$X_PRELIBS -lXETrap" + [AC_DEFINE(HAVE_LIBXTRAP)], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + fi + fi + + if test "x$with_xkeyboard" != "xno"; then + saved_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $X_CFLAGS" + AC_CHECK_HEADER(X11/XKBlib.h, HAVE_XKBLIB_H="true", + HAVE_XKBLIB_H="false", [#include ]) + CPPFLAGS="$saved_CPPFLAGS" + if test $HAVE_XKBLIB_H = "true"; then + AC_CHECK_LIB(X11, XkbSelectEvents, + [AC_DEFINE(HAVE_XKEYBOARD)], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + fi + fi + + if test "x$with_xinerama" != "xno"; then + AC_CHECK_LIB(Xinerama, XineramaQueryScreens, + X_PRELIBS="$X_PRELIBS -lXinerama" + [AC_DEFINE(HAVE_LIBXINERAMA)], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + fi + + if test "x$with_xrandr" != "xno"; then + AC_CHECK_LIB(Xrandr, XRRSelectInput, + X_PRELIBS="$X_PRELIBS -lXrandr" + [AC_DEFINE(HAVE_LIBXRANDR) HAVE_LIBXRANDR="true"], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + fi + + if test "x$with_xfixes" != "xno"; then + AC_CHECK_LIB(Xfixes, XFixesGetCursorImage, + X_PRELIBS="$X_PRELIBS -lXfixes" + [AC_DEFINE(HAVE_LIBXFIXES) HAVE_LIBXFIXES="true"], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + fi + + if test "x$with_xdamage" != "xno"; then + AC_CHECK_LIB(Xdamage, XDamageQueryExtension, + X_PRELIBS="$X_PRELIBS -lXdamage" + [AC_DEFINE(HAVE_LIBXDAMAGE) HAVE_LIBXDAMAGE="true"], , + $X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS) + fi + + if test ! -z "$HAVE_LIBXFIXES" -o ! -z "$HAVE_LIBXDAMAGE"; then + # need /usr/sfw/lib in RPATH for Solaris 10 and later + case `(uname -sr) 2>/dev/null` in + "SunOS 5"*) X_EXTRA_LIBS="$X_EXTRA_LIBS -R/usr/sfw/lib" ;; + esac + fi + if test ! -z "$HAVE_LIBXRANDR"; then + # also need /usr/X11/include for Solaris 10 10/08 and later + case `(uname -sr) 2>/dev/null` in + "SunOS 5"*) CPPFLAGS="$CPPFLAGS -I/usr/X11/include" ;; + esac + fi + + X_LIBS="$X_LIBS $X_PRELIBS -lX11 $X_EXTRA_LIBS" + fi + # end x11vnc only. +fi + +AC_SUBST(X_LIBS) +AM_CONDITIONAL(HAVE_X11, test $HAVE_X11 != "false") + +# x11vnc only: +if test "$build_x11vnc" = "yes"; then + +if test "x$HAVE_X11" = "xfalse" -a "x$with_x" != "xno"; then + AC_MSG_ERROR([ +========================================================================== +*** A working X window system build environment is required to build *** +x11vnc. Make sure any required X development packages are installed. +If they are installed in non-standard locations, one can use the +--x-includes=DIR and --x-libraries=DIR configure options or set the +CPPFLAGS and LDFLAGS environment variables to indicate where the X +window system header files and libraries may be found. On 64+32 bit +machines you may need to point to lib64 or lib32 directories to pick up +the correct word size. + +If you want to build x11vnc without X support (e.g. for -rawfb use only +or for native Mac OS X), specify the --without-x configure option. +========================================================================== +]) +fi + +if test "x$HAVE_X11" = "xtrue" -a "x$HAVE_XTEST" != "xtrue"; then + AC_MSG_WARN([ +========================================================================== +*** A working build environment for the XTEST extension was not found *** +(libXtst). An x11vnc built this way will be *ONLY BARELY USABLE*. +You will be able to move the mouse but not click or type. There can +also be deadlocks if an application grabs the X server. + +It is recommended that you install the necessary development packages +for XTEST (perhaps it is named something like libxtst-dev) and run +configure again. +========================================================================== +]) + sleep 5 +fi + +if test "x$with_v4l" != "xno"; then + AC_CHECK_HEADER(linux/videodev.h, + [AC_DEFINE(HAVE_LINUX_VIDEODEV_H)],,) +fi +if test "x$with_fbdev" != "xno"; then + AC_CHECK_HEADER(linux/fb.h, + [AC_DEFINE(HAVE_LINUX_FB_H)],,) +fi +if test "x$with_uinput" != "xno"; then + AC_CHECK_HEADER(linux/input.h, + [AC_DEFINE(HAVE_LINUX_INPUT_H) HAVE_LINUX_INPUT_H="true"],,) + if test "x$HAVE_LINUX_INPUT_H" = "xtrue"; then + AC_CHECK_HEADER(linux/uinput.h, + [AC_DEFINE(HAVE_LINUX_UINPUT_H)],, [#include ]) + fi +fi + +if test "x$with_macosx_native" != "xno"; then + AC_DEFINE(HAVE_MACOSX_NATIVE_DISPLAY) +fi + +# Check for OS X opengl header +AC_CHECK_HEADER(OpenGL/OpenGL.h, + [AC_DEFINE(HAVE_MACOSX_OPENGL_H) HAVE_MACOSX_OPENGL_H="true"],,) + +AH_TEMPLATE(HAVE_AVAHI, [Avahi/mDNS client build environment present]) +AC_ARG_WITH(avahi, +[ --without-avahi disable support for Avahi/mDNS] +[ --with-avahi=DIR use avahi include/library files in DIR],,) +if test "x$with_avahi" != "xno"; then + printf "checking for avahi... " + if test ! -z "$with_avahi" -a "x$with_avahi" != "xyes"; then + AVAHI_CFLAGS="-I$with_avahi/include" + AVAHI_LIBS="-L$with_avahi/lib -lavahi-common -lavahi-client" + echo "using $with_avahi" + with_avahi=yes + elif pkg-config --atleast-version=0.6.4 avahi-client >/dev/null 2>&1; then + AVAHI_CFLAGS=`pkg-config --cflags avahi-client` + AVAHI_LIBS=`pkg-config --libs avahi-client` + with_avahi=yes + echo yes + else + with_avahi=no + echo no + fi +fi +if test "x$with_avahi" = "xyes"; then + AC_DEFINE(HAVE_AVAHI) + AC_SUBST(AVAHI_CFLAGS) + AC_SUBST(AVAHI_LIBS) +fi + +fi +# end x11vnc only. + +# only used in x11vnc/Makefile.am but needs to always be defined: +AM_CONDITIONAL(OSX_OPENGL, test "$HAVE_MACOSX_OPENGL_H" = "true") + +# Checks for libraries. + +if test ! -z "$with_system_libvncserver" -a "x$with_system_libvncserver" != "xno"; then + printf "checking for system libvncserver... " + vneed="0.9.1" + if test "X$VNEED" != "X"; then + vneed=$VNEED + fi + if test "x$with_system_libvncserver" != "xyes"; then + rflag="" + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + rflag="-Xlinker -R$with_system_libvncserver/lib" + else + rflag="-R$with_system_libvncserver/lib" + fi + cmd="$with_system_libvncserver/bin/libvncserver-config" + if $cmd --version 1>/dev/null 2>&1; then + cvers=`$cmd --version 2>/dev/null` + cscore=`echo "$cvers" | tr '.' ' ' | awk '{print 10000 * $1 + 100 * $2 + $3}'` + nscore=`echo "$vneed" | tr '.' ' ' | awk '{print 10000 * $1 + 100 * $2 + $3}'` + + if test $cscore -lt $nscore; then + echo "no" + with_system_libvncserver=no + AC_MSG_ERROR([ +========================================================================== +*** Need libvncserver version $vneed, have version $cvers *** +You are building with a system installed libvncserver and it is not +new enough. +========================================================================== +]) + else + SYSTEM_LIBVNCSERVER_CFLAGS="-I$with_system_libvncserver/include" + SYSTEM_LIBVNCSERVER_LIBS="-L$with_system_libvncserver/lib $rflag -lvncserver -lvncclient" + echo "using $with_system_libvncserver" + with_system_libvncserver=yes + fi + else + echo " *** cannot run $cmd *** " 1>&2 + with_system_libvncserver=no + echo no + fi + elif libvncserver-config --version 1>/dev/null 2>&1; then + rflag="" + rprefix=`libvncserver-config --prefix` + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + rflag=" -Xlinker -R$rprefix/lib " + else + rflag=" -R$rprefix/lib " + fi + cvers=`libvncserver-config --version 2>/dev/null` + cscore=`echo "$cvers" | tr '.' ' ' | awk '{print 10000 * $1 + 100 * $2 + $3}'` + nscore=`echo "$vneed" | tr '.' ' ' | awk '{print 10000 * $1 + 100 * $2 + $3}'` + + if test $cscore -lt $nscore; then + echo "no" + AC_MSG_ERROR([ +========================================================================== +*** Need libvncserver version $vneed, have version $cvers *** +You are building with a system installed libvncserver and it is not +new enough. +========================================================================== +]) + else + SYSTEM_LIBVNCSERVER_CFLAGS=`libvncserver-config --cflags` + SYSTEM_LIBVNCSERVER_LIBS="$rflag"`libvncserver-config --libs` + with_system_libvncserver=yes + echo yes + fi + else + with_system_libvncserver=no + echo no + fi +fi + +if test "x$with_system_libvncserver" = "xyes"; then + AC_DEFINE(HAVE_SYSTEM_LIBVNCSERVER) + AC_SUBST(SYSTEM_LIBVNCSERVER_CFLAGS) + AC_SUBST(SYSTEM_LIBVNCSERVER_LIBS) +fi +AM_CONDITIONAL(HAVE_SYSTEM_LIBVNCSERVER, test "x$with_system_libvncserver" = "xyes") + + +AC_ARG_WITH(jpeg, +[ --without-jpeg disable support for jpeg] +[ --with-jpeg=DIR use jpeg include/library files in DIR],,) + +# At this point: +# no jpeg on command line with_jpeg="" +# -with-jpeg with_jpeg="yes" +# -without-jpeg with_jpeg="no" +# -with-jpeg=/foo/dir with_jpeg="/foo/dir" + +HAVE_LIBJPEG_TURBO="false" + +if test "x$with_jpeg" != "xno"; then + AC_ARG_VAR(JPEG_LDFLAGS, + [Linker flags to use when linking with libjpeg, e.g. -L/foo/dir/lib -Wl,-static -ljpeg -Wl,-shared. This overrides the linker flags set by --with-jpeg.]) + saved_CPPFLAGS="$CPPFLAGS" + saved_LDFLAGS="$LDFLAGS" + saved_LIBS="$LIBS" + if test ! -z "$with_jpeg" -a "x$with_jpeg" != "xyes"; then + # add user supplied directory to flags: + CPPFLAGS="$CPPFLAGS -I$with_jpeg/include" + LDFLAGS="$LDFLAGS -L$with_jpeg/lib" + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + # this is not complete... in general a rat's nest. + LDFLAGS="$LDFLAGS -Xlinker -R$with_jpeg/lib" + else + LDFLAGS="$LDFLAGS -R$with_jpeg/lib" + fi + fi + if test "x$JPEG_LDFLAGS" != "x"; then + LDFLAGS="$saved_LDFLAGS" + LIBS="$LIBS $JPEG_LDFLAGS" + else + LIBS="-ljpeg" + fi + AC_CHECK_HEADER(jpeglib.h, HAVE_JPEGLIB_H="true") + AC_MSG_CHECKING(for jpeg_CreateCompress in libjpeg) + if test "x$HAVE_JPEGLIB_H" = "xtrue"; then + AC_LINK_IFELSE([AC_LANG_CALL([], [jpeg_CreateCompress])], + [AC_MSG_RESULT(yes); + AC_DEFINE(HAVE_LIBJPEG, 1, libjpeg support enabled)], + [AC_MSG_RESULT(no); HAVE_JPEGLIB_H=""]) + fi + if test "x$HAVE_JPEGLIB_H" != "xtrue"; then + # restore old flags on failure: + CPPFLAGS="$saved_CPPFLAGS" + LDFLAGS="$saved_LDFLAGS" + LIBS="$saved_LIBS" + AC_MSG_WARN([ +========================================================================== +*** The libjpeg compression library was not found. *** +This may lead to reduced performance, especially over slow links. +If libjpeg is in a non-standard location use --with-jpeg=DIR to +indicate the header file is in DIR/include/jpeglib.h and the library +in DIR/lib/libjpeg.a. You can also set the JPEG_LDFLAGS variable to +specify more detailed linker flags. A copy of libjpeg-turbo may be +obtained from: https://sourceforge.net/projects/libjpeg-turbo/files/ +A copy of libjpeg may be obtained from: http://ijg.org/files/ +========================================================================== +]) + sleep 5 + fi + + if test "x$HAVE_JPEGLIB_H" = "xtrue"; then + AC_MSG_CHECKING(whether JPEG library is libjpeg-turbo) + m4_define([LJT_TEST], + [AC_LANG_PROGRAM([#include + #include ], + [struct jpeg_compress_struct cinfo; + struct jpeg_error_mgr jerr; + cinfo.err=jpeg_std_error(&jerr); + jpeg_create_compress(&cinfo); + cinfo.input_components = 3; + jpeg_set_defaults(&cinfo); + cinfo.in_color_space = JCS_EXT_RGB; + jpeg_default_colorspace(&cinfo); + return 0;])] + ) + if test "x$cross_compiling" != "xyes"; then + AC_RUN_IFELSE([LJT_TEST], + [HAVE_LIBJPEG_TURBO="true"; AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(no)]) + else + AC_LINK_IFELSE([LJT_TEST], + [HAVE_LIBJPEG_TURBO="true"; AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(no)]) + fi + fi + + if test "x$HAVE_JPEGLIB_H" = "xtrue" -a "x$HAVE_LIBJPEG_TURBO" != "xtrue"; then + AC_MSG_WARN([ +========================================================================== +*** The libjpeg library you are building against is not libjpeg-turbo. +Performance will be reduced. You can obtain libjpeg-turbo from: +https://sourceforge.net/projects/libjpeg-turbo/files/ *** +========================================================================== +]) + fi + +fi + +AC_ARG_WITH(png, +[ --without-png disable support for png] +[ --with-png=DIR use png include/library files in DIR],,) + +# At this point: +# no png on command line with_png="" +# -with-png with_png="yes" +# -without-png with_png="no" +# -with-png=/foo/dir with_png="/foo/dir" + +if test "x$with_png" != "xno"; then + if test ! -z "$with_png" -a "x$with_png" != "xyes"; then + # add user supplied directory to flags: + saved_CPPFLAGS="$CPPFLAGS" + saved_LDFLAGS="$LDFLAGS" + CPPFLAGS="$CPPFLAGS -I$with_png/include" + LDFLAGS="$LDFLAGS -L$with_png/lib" + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + # this is not complete... in general a rat's nest. + LDFLAGS="$LDFLAGS -Xlinker -R$with_png/lib" + else + LDFLAGS="$LDFLAGS -R$with_png/lib" + fi + fi + AC_CHECK_HEADER(png.h, HAVE_PNGLIB_H="true") + if test "x$HAVE_PNGLIB_H" = "xtrue"; then + AC_CHECK_LIB(png, png_create_write_struct, , HAVE_PNGLIB_H="") + fi + if test ! -z "$with_png" -a "x$with_png" != "xyes"; then + if test "x$HAVE_PNGLIB_H" != "xtrue"; then + # restore old flags on failure: + CPPFLAGS="$saved_CPPFLAGS" + LDFLAGS="$saved_LDFLAGS" + fi + fi + if test "$build_x11vnc" = "yes"; then + if test "x$HAVE_PNGLIB_H" != "xtrue"; then + AC_MSG_WARN([ +========================================================================== +*** The libpng compression library was not found. *** +This may lead to reduced performance, especially over slow links. +If libpng is in a non-standard location use --with-png=DIR to +indicate the header file is in DIR/include/png.h and the library +in DIR/lib/libpng.a. A copy of libpng may be obtained from: +http://www.libpng.org/pub/png/libpng.html +========================================================================== +]) + sleep 5 + fi + fi +fi + +AC_ARG_WITH(libz, +[ --without-libz disable support for deflate],,) +AC_ARG_WITH(zlib, +[ --without-zlib disable support for deflate] +[ --with-zlib=DIR use zlib include/library files in DIR],,) + +if test "x$with_zlib" != "xno" -a "x$with_libz" != "xno"; then + if test ! -z "$with_zlib" -a "x$with_zlib" != "xyes"; then + saved_CPPFLAGS="$CPPFLAGS" + saved_LDFLAGS="$LDFLAGS" + CPPFLAGS="$CPPFLAGS -I$with_zlib/include" + LDFLAGS="$LDFLAGS -L$with_zlib/lib" + if test "x$ld_minus_R" = "xno"; then + : + elif test "x$GCC" = "xyes"; then + LDFLAGS="$LDFLAGS -Xlinker -R$with_zlib/lib" + else + LDFLAGS="$LDFLAGS -R$with_zlib/lib" + fi + fi + AC_CHECK_HEADER(zlib.h, HAVE_ZLIB_H="true") + if test "x$HAVE_ZLIB_H" = "xtrue"; then + AC_CHECK_LIB(z, deflate, , HAVE_ZLIB_H="") + fi + if test ! -z "$with_zlib" -a "x$with_zlib" != "xyes"; then + if test "x$HAVE_ZLIB_H" != "xtrue"; then + CPPFLAGS="$saved_CPPFLAGS" + LDFLAGS="$saved_LDFLAGS" + fi + fi + if test "$build_x11vnc" = "yes"; then + if test "x$HAVE_ZLIB_H" != "xtrue"; then + AC_MSG_WARN([ +========================================================================== +*** The libz compression library was not found. *** +This may lead to reduced performance, especially over slow links. +If libz is in a non-standard location use --with-zlib=DIR to indicate the +header file is in DIR/include/zlib.h and the library in DIR/lib/libz.a. +A copy of libz may be obtained from: http://www.gzip.org/zlib/ +========================================================================== +]) + sleep 5 + fi + fi +fi + +AC_ARG_WITH(pthread, +[ --without-pthread disable support for libpthread],,) + +if test "x$with_pthread" != "xno"; then + AC_CHECK_HEADER(pthread.h, HAVE_PTHREAD_H="true") + if test ! -z "$HAVE_PTHREAD_H"; then + AC_CHECK_LIB(pthread, pthread_mutex_lock) + AC_CHECK_LIB(pthread, pthread_mutex_lock, HAVE_LIBPTHREAD="true") + fi +fi +AM_CONDITIONAL(HAVE_LIBPTHREAD, test ! -z "$HAVE_LIBPTHREAD") + +AC_MSG_CHECKING([for __thread]) +AC_LINK_IFELSE([AC_LANG_PROGRAM(, [static __thread int p = 0])], + [AC_DEFINE(HAVE_TLS, 1, + Define to 1 if compiler supports __thread) + AC_MSG_RESULT([yes])], + [AC_MSG_RESULT([no])]) + +# tightvnc-filetransfer implemented using threads: +if test -z "$HAVE_LIBPTHREAD"; then + with_tightvnc_filetransfer="" +fi +if test "x$with_tightvnc_filetransfer" = "xyes"; then + AC_DEFINE(WITH_TIGHTVNC_FILETRANSFER) +fi +AM_CONDITIONAL(WITH_TIGHTVNC_FILETRANSFER, test "$with_tightvnc_filetransfer" = "yes") + +# websockets implemented using base64 from resolve +if test "x$HAVE_B64" != "xtrue"; then + with_websockets="" +fi +if test "x$with_websockets" = "xyes"; then + LIBS="$LIBS -lresolv $SSL_LIBS" + AC_DEFINE(WITH_WEBSOCKETS) +fi +AM_CONDITIONAL(WITH_WEBSOCKETS, test "$with_websockets" = "yes") + +AM_CONDITIONAL(HAVE_LIBZ, test ! -z "$HAVE_ZLIB_H") +AM_CONDITIONAL(HAVE_LIBJPEG, test ! -z "$HAVE_JPEGLIB_H") +AM_CONDITIONAL(HAVE_LIBPNG, test ! -z "$HAVE_PNGLIB_H") + + +SDLCONFIG="sdl-config" +AC_ARG_WITH(sdl-config, +[[ --with-sdl-config=FILE + Use the given path to sdl-config when determining + SDL configuration; defaults to "sdl-config"]], +[ + if test "$withval" != "yes" -a "$withval" != ""; then + SDLCONFIG=$withval + fi +]) + +if test -z "$with_sdl"; then + if $SDLCONFIG --version >/dev/null 2>&1; then + with_sdl=yes + SDL_CFLAGS=`$SDLCONFIG --cflags` + SDL_LIBS=`$SDLCONFIG --libs` + else + with_sdl=no + fi +fi +AM_CONDITIONAL(HAVE_LIBSDL, test "x$with_sdl" = "xyes") +AC_SUBST(SDL_CFLAGS) +AC_SUBST(SDL_LIBS) + + +# Check for GTK+. if present, build the GTK+ vnc viewer example +PKG_CHECK_MODULES([GTK], [gtk+-2.0],,:) +AM_CONDITIONAL(HAVE_LIBGTK, test ! -z "$GTK_LIBS") + +AC_CANONICAL_HOST +MINGW=`echo $host_os | grep mingw32 2>/dev/null` +AM_CONDITIONAL(MINGW, test ! -z "$MINGW" ) +if test ! -z "$MINGW"; then + WSOCKLIB="-lws2_32" + LDFLAGS="$LDFLAGS -no-undefined" +fi +AC_SUBST(WSOCKLIB) + +# Check for libgcrypt +AH_TEMPLATE(WITH_CLIENT_GCRYPT, [Enable support for libgcrypt in libvncclient]) +AC_ARG_WITH(gcrypt, +[ --without-gcrypt disable support for gcrypt],,) +AC_ARG_WITH(client-gcrypt, +[ --without-client-gcrypt disable support for gcrypt in libvncclient],,) + +if test "x$with_gcrypt" != "xno"; then + AM_PATH_LIBGCRYPT(1.4.0, , with_client_gcrypt=no) + CFLAGS="$CFLAGS $LIBGCRYPT_CFLAGS" + LIBS="$LIBS $LIBGCRYPT_LIBS" + if test "x$with_client_gcrypt" != "xno"; then + AC_DEFINE(WITH_CLIENT_GCRYPT) + fi +fi + +# Checks for GnuTLS +AH_TEMPLATE(HAVE_GNUTLS, [GnuTLS library present]) +AC_ARG_WITH(gnutls, +[ --without-gnutls disable support for gnutls] +[ --with-gnutls=DIR use gnutls include/library files in DIR],,) + +if test "x$with_gnutls" != "xno"; then + PKG_CHECK_MODULES(GNUTLS, gnutls >= 2.4.0,,:) + CFLAGS="$CFLAGS $GNUTLS_CFLAGS" + LIBS="$LIBS $GNUTLS_LIBS" +fi +AM_CONDITIONAL(HAVE_GNUTLS, test ! -z "$GNUTLS_LIBS") +if test ! -z "$GNUTLS_LIBS" ; then + AC_DEFINE(HAVE_GNUTLS) +fi + + +# warn if neither GnuTLS nor OpenSSL are available +if test -z "$SSL_LIBS" -a -z "$GNUTLS_LIBS"; then + AC_MSG_WARN([ +========================================================================== +*** No encryption library could be found. *** +A libvncserver/libvncclient built this way will not support SSL encryption. +To enable SSL install the necessary development packages (perhaps it is named +something like libssl-dev or gnutls-dev) and run configure again. +========================================================================== +]) + sleep 5 +fi + + +# IPv6 +AH_TEMPLATE(IPv6, [Enable IPv6 support]) +AC_ARG_WITH(ipv6, +[ --without-ipv6 disable IPv6 support],,) +if test "x$with_ipv6" != "xno"; then + AC_CHECK_FUNC(getaddrinfo, AC_DEFINE(IPv6,1), + AC_CHECK_LIB(socket, getaddrinfo, AC_DEFINE(IPv6,1), [ + AC_MSG_CHECKING([for getaddrinfo in -lws2_32]) + LIBS="$LIBS -lws2_32" + AC_TRY_LINK([#include ], [getaddrinfo(0, 0, 0, 0);], [ + AC_DEFINE(IPv6,1) + AC_MSG_RESULT([yes]) + ], + AC_MSG_RESULT([no])) + ])) +fi + + + +# Checks for header files. +AC_HEADER_STDC +AC_CHECK_HEADERS([arpa/inet.h fcntl.h netdb.h netinet/in.h stdlib.h string.h sys/socket.h sys/time.h sys/timeb.h syslog.h unistd.h ws2tcpip.h]) + +# x11vnc only: +if test "$build_x11vnc" = "yes"; then + AC_CHECK_HEADERS([pwd.h sys/wait.h utmpx.h termios.h sys/ioctl.h sys/stropts.h]) +fi + +# Checks for typedefs, structures, and compiler characteristics. +AC_C_CONST +AC_C_INLINE +AC_C_BIGENDIAN +AC_TYPE_SIZE_T +AC_HEADER_TIME +AC_HEADER_SYS_WAIT +AC_TYPE_SOCKLEN_T +if test ! -d ./rfb; then + echo "creating subdir ./rfb for rfbint.h" + mkdir ./rfb +fi +AC_CREATE_STDINT_H(rfb/rfbint.h) +AC_CACHE_CHECK([for in_addr_t], + vnc_cv_inaddrt, [ + AC_TRY_COMPILE([#include +#include ], + [in_addr_t foo; return 0;], + [inaddrt=yes], + [inaddrt=no]), + ]) +AH_TEMPLATE(NEED_INADDR_T, [Need a typedef for in_addr_t]) +if test $inaddrt = no ; then + AC_DEFINE(NEED_INADDR_T) +fi +# Checks for library functions. +AC_FUNC_MEMCMP +AC_FUNC_STAT +AC_FUNC_STRFTIME +AC_FUNC_VPRINTF +AC_FUNC_FORK +AC_CHECK_LIB(nsl,gethostbyname) +AC_CHECK_LIB(socket,socket) + +uname_s=`(uname -s) 2>/dev/null` +if test "x$uname_s" = "xHP-UX"; then + # need -lsec for getspnam() + LDFLAGS="$LDFLAGS -lsec" +fi + +AC_CHECK_FUNCS([ftime gethostbyname gethostname gettimeofday inet_ntoa memmove memset mmap mkfifo select socket strchr strcspn strdup strerror strstr]) +# x11vnc only: +if test "$build_x11vnc" = "yes"; then + AC_CHECK_FUNCS([setsid setpgrp getpwuid getpwnam getspnam getuid geteuid setuid setgid seteuid setegid initgroups waitpid setutxent grantpt shmat]) +fi + +# check, if shmget is in cygipc.a +AC_CHECK_LIB(cygipc,shmget) +AM_CONDITIONAL(CYGIPC, test "$HAVE_CYGIPC" = "true") + +# Check if /usr/include/linux exists, if so, define LINUX +AM_CONDITIONAL(LINUX, test -d /usr/include/linux) + +# Check for OS X specific header +AC_CHECK_HEADER(ApplicationServices/ApplicationServices.h, HAVE_OSX="true") +AM_CONDITIONAL(OSX, test "$HAVE_OSX" = "true") + +# Check for Android specific header +AC_CHECK_HEADER(android/api-level.h, HAVE_ANDROID="true") +AM_CONDITIONAL(ANDROID, test "$HAVE_ANDROID" = "true") +if test "$HAVE_ANDROID" = "true"; then + AC_DEFINE(HAVE_ANDROID, 1, [Android host system detected]) +fi + +# On Solaris 2.7, write() returns ENOENT when it really means EAGAIN +AH_TEMPLATE(ENOENT_WORKAROUND, [work around when write() returns ENOENT but does not mean it]) +case `(uname -sr) 2>/dev/null` in + "SunOS 5.7") + AC_DEFINE(ENOENT_WORKAROUND) + ;; +esac + +# Check for rpm SOURCES path +printf "checking for rpm sources path... " +RPMSOURCEDIR="NOT-FOUND" +for directory in packages OpenLinux redhat RedHat rpm RPM "" ; do + if test -d /usr/src/${directory}/SOURCES; then + RPMSOURCEDIR="/usr/src/${directory}/SOURCES/" + fi +done +echo "$RPMSOURCEDIR" +AM_CONDITIONAL(HAVE_RPM, test "$RPMSOURCEDIR" != "NOT-FOUND") +AM_CONDITIONAL(WITH_X11VNC, test "$build_x11vnc" = "yes") +AC_SUBST(RPMSOURCEDIR) + +AC_CONFIG_FILES([Makefile + libvncserver.pc + libvncclient.pc + libvncserver/Makefile + examples/Makefile + examples/android/Makefile + vncterm/Makefile + webclients/Makefile + webclients/java-applet/Makefile + webclients/java-applet/ssl/Makefile + libvncclient/Makefile + client_examples/Makefile + test/Makefile + libvncserver-config + LibVNCServer.spec]) +# +# x11vnc only: +# +if test "$build_x11vnc" = "yes"; then + # + # NOTE: if you are using the LibVNCServer-X.Y.Z.tar.gz source + # tarball and nevertheless want to run autoconf (i.e. aclocal, + # autoheader, automake, autoconf) AGAIN (perhaps you have a + # special target system, e.g. embedded) then you will need to + # comment out the following 'AC_CONFIG_FILES' line to avoid + # automake error messages like: + # + # configure.ac:690: required file `x11vnc/Makefile.in' not found + # + AC_CONFIG_FILES([x11vnc/Makefile x11vnc/misc/Makefile x11vnc/misc/turbovnc/Makefile]) + + if test ! -z "$with_system_libvncserver" -a "x$with_system_libvncserver" != "xno"; then + # need to move local tarball rfb headers aside: + hdrs="rfb.h rfbclient.h rfbproto.h rfbregion.h rfbint.h" + echo "with-system-libvncserver: moving aside headers $hdrs" + for hdr in $hdrs + do + if test -f "rfb/$hdr"; then + echo "with-system-libvncserver: moving rfb/$hdr to rfb/$hdr.ORIG" + mv rfb/$hdr rfb/$hdr.ORIG + fi + done + echo "with-system-libvncserver: *NOTE* move them back manually to start over." + fi +fi + +AC_CONFIG_COMMANDS([chmod-libvncserver-config],[chmod a+x libvncserver-config]) +AC_OUTPUT +chmod a+x ./libvncserver-config + diff --git a/jni/vnc/LibVNCServer-0.9.9/depcomp b/jni/vnc/LibVNCServer-0.9.9/depcomp new file mode 100755 index 0000000..df8eea7 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/depcomp @@ -0,0 +1,630 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2009-04-28.21; # UTC + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free +# Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u="sed s,\\\\\\\\,/,g" + depmode=msvisualcpp +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> "$depfile" + echo >> "$depfile" + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add `dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/Makefile.am b/jni/vnc/LibVNCServer-0.9.9/examples/Makefile.am new file mode 100644 index 0000000..29d3774 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/Makefile.am @@ -0,0 +1,27 @@ +INCLUDES = -I$(top_srcdir) +LDADD = ../libvncserver/libvncserver.la @WSOCKLIB@ + +if OSX +MAC=mac +mac_LDFLAGS=-framework ApplicationServices -framework Carbon -framework IOKit +endif + +if ANDROID +SUBDIRS=android +endif + +if WITH_TIGHTVNC_FILETRANSFER +FILETRANSFER=filetransfer +endif + +if HAVE_LIBPTHREAD +BLOOPTEST=blooptest +endif + +noinst_HEADERS=radon.h rotatetemplate.c + +noinst_PROGRAMS=example pnmshow regiontest pnmshow24 fontsel \ + vncev storepasswd colourmaptest simple simple15 $(MAC) \ + $(FILETRANSFER) backchannel $(BLOOPTEST) camera rotate \ + zippy + diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/Makefile.in b/jni/vnc/LibVNCServer-0.9.9/examples/Makefile.in new file mode 100644 index 0000000..030f65a --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/Makefile.in @@ -0,0 +1,820 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +noinst_PROGRAMS = example$(EXEEXT) pnmshow$(EXEEXT) \ + regiontest$(EXEEXT) pnmshow24$(EXEEXT) fontsel$(EXEEXT) \ + vncev$(EXEEXT) storepasswd$(EXEEXT) colourmaptest$(EXEEXT) \ + simple$(EXEEXT) simple15$(EXEEXT) $(am__EXEEXT_1) \ + $(am__EXEEXT_2) backchannel$(EXEEXT) $(am__EXEEXT_3) \ + camera$(EXEEXT) rotate$(EXEEXT) zippy$(EXEEXT) +subdir = examples +DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/rfbconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +@OSX_TRUE@am__EXEEXT_1 = mac$(EXEEXT) +@WITH_TIGHTVNC_FILETRANSFER_TRUE@am__EXEEXT_2 = filetransfer$(EXEEXT) +@HAVE_LIBPTHREAD_TRUE@am__EXEEXT_3 = blooptest$(EXEEXT) +PROGRAMS = $(noinst_PROGRAMS) +backchannel_SOURCES = backchannel.c +backchannel_OBJECTS = backchannel.$(OBJEXT) +backchannel_LDADD = $(LDADD) +backchannel_DEPENDENCIES = ../libvncserver/libvncserver.la +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +blooptest_SOURCES = blooptest.c +blooptest_OBJECTS = blooptest.$(OBJEXT) +blooptest_LDADD = $(LDADD) +blooptest_DEPENDENCIES = ../libvncserver/libvncserver.la +camera_SOURCES = camera.c +camera_OBJECTS = camera.$(OBJEXT) +camera_LDADD = $(LDADD) +camera_DEPENDENCIES = ../libvncserver/libvncserver.la +colourmaptest_SOURCES = colourmaptest.c +colourmaptest_OBJECTS = colourmaptest.$(OBJEXT) +colourmaptest_LDADD = $(LDADD) +colourmaptest_DEPENDENCIES = ../libvncserver/libvncserver.la +example_SOURCES = example.c +example_OBJECTS = example.$(OBJEXT) +example_LDADD = $(LDADD) +example_DEPENDENCIES = ../libvncserver/libvncserver.la +filetransfer_SOURCES = filetransfer.c +filetransfer_OBJECTS = filetransfer.$(OBJEXT) +filetransfer_LDADD = $(LDADD) +filetransfer_DEPENDENCIES = ../libvncserver/libvncserver.la +fontsel_SOURCES = fontsel.c +fontsel_OBJECTS = fontsel.$(OBJEXT) +fontsel_LDADD = $(LDADD) +fontsel_DEPENDENCIES = ../libvncserver/libvncserver.la +mac_SOURCES = mac.c +mac_OBJECTS = mac.$(OBJEXT) +mac_LDADD = $(LDADD) +mac_DEPENDENCIES = ../libvncserver/libvncserver.la +mac_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(mac_LDFLAGS) $(LDFLAGS) -o $@ +pnmshow_SOURCES = pnmshow.c +pnmshow_OBJECTS = pnmshow.$(OBJEXT) +pnmshow_LDADD = $(LDADD) +pnmshow_DEPENDENCIES = ../libvncserver/libvncserver.la +pnmshow24_SOURCES = pnmshow24.c +pnmshow24_OBJECTS = pnmshow24.$(OBJEXT) +pnmshow24_LDADD = $(LDADD) +pnmshow24_DEPENDENCIES = ../libvncserver/libvncserver.la +regiontest_SOURCES = regiontest.c +regiontest_OBJECTS = regiontest.$(OBJEXT) +regiontest_LDADD = $(LDADD) +regiontest_DEPENDENCIES = ../libvncserver/libvncserver.la +rotate_SOURCES = rotate.c +rotate_OBJECTS = rotate.$(OBJEXT) +rotate_LDADD = $(LDADD) +rotate_DEPENDENCIES = ../libvncserver/libvncserver.la +simple_SOURCES = simple.c +simple_OBJECTS = simple.$(OBJEXT) +simple_LDADD = $(LDADD) +simple_DEPENDENCIES = ../libvncserver/libvncserver.la +simple15_SOURCES = simple15.c +simple15_OBJECTS = simple15.$(OBJEXT) +simple15_LDADD = $(LDADD) +simple15_DEPENDENCIES = ../libvncserver/libvncserver.la +storepasswd_SOURCES = storepasswd.c +storepasswd_OBJECTS = storepasswd.$(OBJEXT) +storepasswd_LDADD = $(LDADD) +storepasswd_DEPENDENCIES = ../libvncserver/libvncserver.la +vncev_SOURCES = vncev.c +vncev_OBJECTS = vncev.$(OBJEXT) +vncev_LDADD = $(LDADD) +vncev_DEPENDENCIES = ../libvncserver/libvncserver.la +zippy_SOURCES = zippy.c +zippy_OBJECTS = zippy.$(OBJEXT) +zippy_LDADD = $(LDADD) +zippy_DEPENDENCIES = ../libvncserver/libvncserver.la +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = backchannel.c blooptest.c camera.c colourmaptest.c example.c \ + filetransfer.c fontsel.c mac.c pnmshow.c pnmshow24.c \ + regiontest.c rotate.c simple.c simple15.c storepasswd.c \ + vncev.c zippy.c +DIST_SOURCES = backchannel.c blooptest.c camera.c colourmaptest.c \ + example.c filetransfer.c fontsel.c mac.c pnmshow.c pnmshow24.c \ + regiontest.c rotate.c simple.c simple15.c storepasswd.c \ + vncev.c zippy.c +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +HEADERS = $(noinst_HEADERS) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = android +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AVAHI_CFLAGS = @AVAHI_CFLAGS@ +AVAHI_LIBS = @AVAHI_LIBS@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CRYPT_LIBS = @CRYPT_LIBS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LDFLAGS = @JPEG_LDFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +RPMSOURCEDIR = @RPMSOURCEDIR@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSL_LIBS = @SSL_LIBS@ +STRIP = @STRIP@ +SYSTEM_LIBVNCSERVER_CFLAGS = @SYSTEM_LIBVNCSERVER_CFLAGS@ +SYSTEM_LIBVNCSERVER_LIBS = @SYSTEM_LIBVNCSERVER_LIBS@ +VERSION = @VERSION@ +WSOCKLIB = @WSOCKLIB@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_ffmpeg = @with_ffmpeg@ +INCLUDES = -I$(top_srcdir) +LDADD = ../libvncserver/libvncserver.la @WSOCKLIB@ +@OSX_TRUE@MAC = mac +@OSX_TRUE@mac_LDFLAGS = -framework ApplicationServices -framework Carbon -framework IOKit +@ANDROID_TRUE@SUBDIRS = android +@WITH_TIGHTVNC_FILETRANSFER_TRUE@FILETRANSFER = filetransfer +@HAVE_LIBPTHREAD_TRUE@BLOOPTEST = blooptest +noinst_HEADERS = radon.h rotatetemplate.c +all: all-recursive + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu examples/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu examples/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +backchannel$(EXEEXT): $(backchannel_OBJECTS) $(backchannel_DEPENDENCIES) + @rm -f backchannel$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(backchannel_OBJECTS) $(backchannel_LDADD) $(LIBS) +blooptest$(EXEEXT): $(blooptest_OBJECTS) $(blooptest_DEPENDENCIES) + @rm -f blooptest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(blooptest_OBJECTS) $(blooptest_LDADD) $(LIBS) +camera$(EXEEXT): $(camera_OBJECTS) $(camera_DEPENDENCIES) + @rm -f camera$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(camera_OBJECTS) $(camera_LDADD) $(LIBS) +colourmaptest$(EXEEXT): $(colourmaptest_OBJECTS) $(colourmaptest_DEPENDENCIES) + @rm -f colourmaptest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(colourmaptest_OBJECTS) $(colourmaptest_LDADD) $(LIBS) +example$(EXEEXT): $(example_OBJECTS) $(example_DEPENDENCIES) + @rm -f example$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(example_OBJECTS) $(example_LDADD) $(LIBS) +filetransfer$(EXEEXT): $(filetransfer_OBJECTS) $(filetransfer_DEPENDENCIES) + @rm -f filetransfer$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(filetransfer_OBJECTS) $(filetransfer_LDADD) $(LIBS) +fontsel$(EXEEXT): $(fontsel_OBJECTS) $(fontsel_DEPENDENCIES) + @rm -f fontsel$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(fontsel_OBJECTS) $(fontsel_LDADD) $(LIBS) +mac$(EXEEXT): $(mac_OBJECTS) $(mac_DEPENDENCIES) + @rm -f mac$(EXEEXT) + $(AM_V_CCLD)$(mac_LINK) $(mac_OBJECTS) $(mac_LDADD) $(LIBS) +pnmshow$(EXEEXT): $(pnmshow_OBJECTS) $(pnmshow_DEPENDENCIES) + @rm -f pnmshow$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pnmshow_OBJECTS) $(pnmshow_LDADD) $(LIBS) +pnmshow24$(EXEEXT): $(pnmshow24_OBJECTS) $(pnmshow24_DEPENDENCIES) + @rm -f pnmshow24$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pnmshow24_OBJECTS) $(pnmshow24_LDADD) $(LIBS) +regiontest$(EXEEXT): $(regiontest_OBJECTS) $(regiontest_DEPENDENCIES) + @rm -f regiontest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(regiontest_OBJECTS) $(regiontest_LDADD) $(LIBS) +rotate$(EXEEXT): $(rotate_OBJECTS) $(rotate_DEPENDENCIES) + @rm -f rotate$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(rotate_OBJECTS) $(rotate_LDADD) $(LIBS) +simple$(EXEEXT): $(simple_OBJECTS) $(simple_DEPENDENCIES) + @rm -f simple$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(simple_OBJECTS) $(simple_LDADD) $(LIBS) +simple15$(EXEEXT): $(simple15_OBJECTS) $(simple15_DEPENDENCIES) + @rm -f simple15$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(simple15_OBJECTS) $(simple15_LDADD) $(LIBS) +storepasswd$(EXEEXT): $(storepasswd_OBJECTS) $(storepasswd_DEPENDENCIES) + @rm -f storepasswd$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(storepasswd_OBJECTS) $(storepasswd_LDADD) $(LIBS) +vncev$(EXEEXT): $(vncev_OBJECTS) $(vncev_DEPENDENCIES) + @rm -f vncev$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(vncev_OBJECTS) $(vncev_LDADD) $(LIBS) +zippy$(EXEEXT): $(zippy_OBJECTS) $(zippy_DEPENDENCIES) + @rm -f zippy$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(zippy_OBJECTS) $(zippy_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/backchannel.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blooptest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/camera.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/colourmaptest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/example.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filetransfer.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fontsel.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mac.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pnmshow.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pnmshow24.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/regiontest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rotate.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/simple.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/simple15.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/storepasswd.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vncev.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zippy.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile $(PROGRAMS) $(HEADERS) +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ + mostlyclean-am + +distclean: distclean-recursive + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ + install-am install-strip tags-recursive + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic clean-libtool \ + clean-noinstPROGRAMS ctags ctags-recursive distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/android/Makefile.am b/jni/vnc/LibVNCServer-0.9.9/examples/android/Makefile.am new file mode 100644 index 0000000..2104967 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/android/Makefile.am @@ -0,0 +1,7 @@ +INCLUDES = -I$(top_srcdir) +LDADD = $(top_srcdir)/libvncserver/libvncserver.la @WSOCKLIB@ + +noinst_PROGRAMS=androidvncserver +androidvncserver_SOURCES=jni/fbvncserver.c + +EXTRA_DIST=jni/Android.mk diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/android/Makefile.in b/jni/vnc/LibVNCServer-0.9.9/examples/android/Makefile.in new file mode 100644 index 0000000..f133baa --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/android/Makefile.in @@ -0,0 +1,532 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +noinst_PROGRAMS = androidvncserver$(EXEEXT) +subdir = examples/android +DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/rfbconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +PROGRAMS = $(noinst_PROGRAMS) +am_androidvncserver_OBJECTS = fbvncserver.$(OBJEXT) +androidvncserver_OBJECTS = $(am_androidvncserver_OBJECTS) +androidvncserver_LDADD = $(LDADD) +androidvncserver_DEPENDENCIES = \ + $(top_srcdir)/libvncserver/libvncserver.la +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = $(androidvncserver_SOURCES) +DIST_SOURCES = $(androidvncserver_SOURCES) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AVAHI_CFLAGS = @AVAHI_CFLAGS@ +AVAHI_LIBS = @AVAHI_LIBS@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CRYPT_LIBS = @CRYPT_LIBS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LDFLAGS = @JPEG_LDFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +RPMSOURCEDIR = @RPMSOURCEDIR@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSL_LIBS = @SSL_LIBS@ +STRIP = @STRIP@ +SYSTEM_LIBVNCSERVER_CFLAGS = @SYSTEM_LIBVNCSERVER_CFLAGS@ +SYSTEM_LIBVNCSERVER_LIBS = @SYSTEM_LIBVNCSERVER_LIBS@ +VERSION = @VERSION@ +WSOCKLIB = @WSOCKLIB@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_ffmpeg = @with_ffmpeg@ +INCLUDES = -I$(top_srcdir) +LDADD = $(top_srcdir)/libvncserver/libvncserver.la @WSOCKLIB@ +androidvncserver_SOURCES = jni/fbvncserver.c +EXTRA_DIST = jni/Android.mk +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu examples/android/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu examples/android/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +androidvncserver$(EXEEXT): $(androidvncserver_OBJECTS) $(androidvncserver_DEPENDENCIES) + @rm -f androidvncserver$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(androidvncserver_OBJECTS) $(androidvncserver_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fbvncserver.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +fbvncserver.o: jni/fbvncserver.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fbvncserver.o -MD -MP -MF $(DEPDIR)/fbvncserver.Tpo -c -o fbvncserver.o `test -f 'jni/fbvncserver.c' || echo '$(srcdir)/'`jni/fbvncserver.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fbvncserver.Tpo $(DEPDIR)/fbvncserver.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='jni/fbvncserver.c' object='fbvncserver.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fbvncserver.o `test -f 'jni/fbvncserver.c' || echo '$(srcdir)/'`jni/fbvncserver.c + +fbvncserver.obj: jni/fbvncserver.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fbvncserver.obj -MD -MP -MF $(DEPDIR)/fbvncserver.Tpo -c -o fbvncserver.obj `if test -f 'jni/fbvncserver.c'; then $(CYGPATH_W) 'jni/fbvncserver.c'; else $(CYGPATH_W) '$(srcdir)/jni/fbvncserver.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fbvncserver.Tpo $(DEPDIR)/fbvncserver.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='jni/fbvncserver.c' object='fbvncserver.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fbvncserver.obj `if test -f 'jni/fbvncserver.c'; then $(CYGPATH_W) 'jni/fbvncserver.c'; else $(CYGPATH_W) '$(srcdir)/jni/fbvncserver.c'; fi` + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-noinstPROGRAMS ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags uninstall uninstall-am + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/android/README b/jni/vnc/LibVNCServer-0.9.9/examples/android/README new file mode 100644 index 0000000..57e14cf --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/android/README @@ -0,0 +1,63 @@ + +This example VNC server for Android is adopted from +http://code.google.com/p/android-vnc-server/ with some additional +fixes applied. + +To build, you'll need the Android Native Development Kit from +http://developer.android.com/sdk/ndk/. + + +Building with autotools +----------------------- + +This has the advantage that the LibVNCServer sources are properly set up +using the configure script. + +1. Read /docs/STANDALONE-TOOLCHAIN.html. + +2. Setup your toolchain according to step 3 in the above file. + +3. Execute + + ./configure --host=arm-eabi CC=arm-linux-androideabi-gcc + + in the LibVNCServer root directory. + +4. Execute + + make + + in the LibVNCServer root directory. This will build the whole + LibVNCServer distribution for Android, including androidvncserver. + + + + +Building with the NDK build system +---------------------------------- + +This is probably easier than the autotools method, but you'll have to edit +some files manually. + +1. Edit rfb/rfbconfig.h to match your Android target. For instance, comment out + LIBVNCSERVER_HAVE_LIBJPEG if you don't have libjpeg for Android. + +2. Edit the HAVE_X variables in jni/Android.mk accordingly. + +3. Execute + + ndk-build -C . + + in the examples/android directory. The resulting binary will be in libs/. + + + +Installing && Running +--------------------- + +This can be done via + + adb push androidvncserver /data/local/ + adb shell /data/local/androidvncserver + + diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/android/jni/Android.mk b/jni/vnc/LibVNCServer-0.9.9/examples/android/jni/Android.mk new file mode 100644 index 0000000..731a790 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/android/jni/Android.mk @@ -0,0 +1,65 @@ +LOCAL_PATH:= $(call my-dir) +include $(CLEAR_VARS) + +LIBVNCSERVER_ROOT:=../../.. + +HAVE_LIBZ=1 +#HAVE_LIBJPEG=1 + +ifdef HAVE_LIBZ +ZLIBSRCS := \ + $(LIBVNCSERVER_ROOT)/libvncserver/zlib.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/zrle.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/zrleoutstream.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/zrlepalettehelper.c \ + $(LIBVNCSERVER_ROOT)/common/zywrletemplate.c +ifdef HAVE_LIBJPEG +TIGHTSRCS := $(LIBVNCSERVER_ROOT)/libvncserver/tight.c +endif +endif + +LOCAL_SRC_FILES:= \ + fbvncserver.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/main.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/rfbserver.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/rfbregion.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/auth.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/sockets.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/stats.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/corre.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/hextile.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/rre.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/translate.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/cutpaste.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/httpd.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/cursor.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/font.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/draw.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/selbox.c \ + $(LIBVNCSERVER_ROOT)/common/d3des.c \ + $(LIBVNCSERVER_ROOT)/common/vncauth.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/cargs.c \ + $(LIBVNCSERVER_ROOT)/common/minilzo.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/ultra.c \ + $(LIBVNCSERVER_ROOT)/libvncserver/scale.c \ + $(ZLIBSRCS) \ + $(TIGHTSRCS) + +LOCAL_C_INCLUDES := \ + $(LOCAL_PATH) \ + $(LOCAL_PATH)/$(LIBVNCSERVER_ROOT)/libvncserver \ + $(LOCAL_PATH)/$(LIBVNCSERVER_ROOT)/common \ + $(LOCAL_PATH)/$(LIBVNCSERVER_ROOT) \ + external/jpeg + +ifdef HAVE_LIBZ +LOCAL_SHARED_LIBRARIES := libz +LOCAL_LDLIBS := -lz +endif +ifdef HAVE_LIBJPEG +LOCAL_STATIC_LIBRARIES := libjpeg +endif + +LOCAL_MODULE:= androidvncserver + +include $(BUILD_EXECUTABLE) diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/android/jni/fbvncserver.c b/jni/vnc/LibVNCServer-0.9.9/examples/android/jni/fbvncserver.c new file mode 100644 index 0000000..a8c4827 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/android/jni/fbvncserver.c @@ -0,0 +1,522 @@ +/* + * $Id$ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * This project is an adaptation of the original fbvncserver for the iPAQ + * and Zaurus. + */ + +#include +#include +#include + +#include +#include +#include + +#include +#include /* For makedev() */ + +#include +#include +#include + +#include +#include + +/* libvncserver */ +#include "rfb/rfb.h" +#include "rfb/keysym.h" + +/*****************************************************************************/ + +/* Android does not use /dev/fb0. */ +#define FB_DEVICE "/dev/graphics/fb0" +static char KBD_DEVICE[256] = "/dev/input/event3"; +static char TOUCH_DEVICE[256] = "/dev/input/event1"; +static struct fb_var_screeninfo scrinfo; +static int fbfd = -1; +static int kbdfd = -1; +static int touchfd = -1; +static unsigned short int *fbmmap = MAP_FAILED; +static unsigned short int *vncbuf; +static unsigned short int *fbbuf; + +/* Android already has 5900 bound natively. */ +#define VNC_PORT 5901 +static rfbScreenInfoPtr vncscr; + +static int xmin, xmax; +static int ymin, ymax; + +/* No idea, just copied from fbvncserver as part of the frame differerencing + * algorithm. I will probably be later rewriting all of this. */ +static struct varblock_t +{ + int min_i; + int min_j; + int max_i; + int max_j; + int r_offset; + int g_offset; + int b_offset; + int rfb_xres; + int rfb_maxy; +} varblock; + +/*****************************************************************************/ + +static void keyevent(rfbBool down, rfbKeySym key, rfbClientPtr cl); +static void ptrevent(int buttonMask, int x, int y, rfbClientPtr cl); + +/*****************************************************************************/ + +static void init_fb(void) +{ + size_t pixels; + size_t bytespp; + + if ((fbfd = open(FB_DEVICE, O_RDONLY)) == -1) + { + printf("cannot open fb device %s\n", FB_DEVICE); + exit(EXIT_FAILURE); + } + + if (ioctl(fbfd, FBIOGET_VSCREENINFO, &scrinfo) != 0) + { + printf("ioctl error\n"); + exit(EXIT_FAILURE); + } + + pixels = scrinfo.xres * scrinfo.yres; + bytespp = scrinfo.bits_per_pixel / 8; + + fprintf(stderr, "xres=%d, yres=%d, xresv=%d, yresv=%d, xoffs=%d, yoffs=%d, bpp=%d\n", + (int)scrinfo.xres, (int)scrinfo.yres, + (int)scrinfo.xres_virtual, (int)scrinfo.yres_virtual, + (int)scrinfo.xoffset, (int)scrinfo.yoffset, + (int)scrinfo.bits_per_pixel); + + fbmmap = mmap(NULL, pixels * bytespp, PROT_READ, MAP_SHARED, fbfd, 0); + + if (fbmmap == MAP_FAILED) + { + printf("mmap failed\n"); + exit(EXIT_FAILURE); + } +} + +static void cleanup_fb(void) +{ + if(fbfd != -1) + { + close(fbfd); + } +} + +static void init_kbd() +{ + if((kbdfd = open(KBD_DEVICE, O_RDWR)) == -1) + { + printf("cannot open kbd device %s\n", KBD_DEVICE); + exit(EXIT_FAILURE); + } +} + +static void cleanup_kbd() +{ + if(kbdfd != -1) + { + close(kbdfd); + } +} + +static void init_touch() +{ + struct input_absinfo info; + if((touchfd = open(TOUCH_DEVICE, O_RDWR)) == -1) + { + printf("cannot open touch device %s\n", TOUCH_DEVICE); + exit(EXIT_FAILURE); + } + // Get the Range of X and Y + if(ioctl(touchfd, EVIOCGABS(ABS_X), &info)) { + printf("cannot get ABS_X info, %s\n", strerror(errno)); + exit(EXIT_FAILURE); + } + xmin = info.minimum; + xmax = info.maximum; + if(ioctl(touchfd, EVIOCGABS(ABS_Y), &info)) { + printf("cannot get ABS_Y, %s\n", strerror(errno)); + exit(EXIT_FAILURE); + } + ymin = info.minimum; + ymax = info.maximum; + +} + +static void cleanup_touch() +{ + if(touchfd != -1) + { + close(touchfd); + } +} + +/*****************************************************************************/ + +static void init_fb_server(int argc, char **argv) +{ + printf("Initializing server...\n"); + + /* Allocate the VNC server buffer to be managed (not manipulated) by + * libvncserver. */ + vncbuf = calloc(scrinfo.xres * scrinfo.yres, scrinfo.bits_per_pixel / 8); + assert(vncbuf != NULL); + + /* Allocate the comparison buffer for detecting drawing updates from frame + * to frame. */ + fbbuf = calloc(scrinfo.xres * scrinfo.yres, scrinfo.bits_per_pixel / 8); + assert(fbbuf != NULL); + + /* TODO: This assumes scrinfo.bits_per_pixel is 16. */ + vncscr = rfbGetScreen(&argc, argv, scrinfo.xres, scrinfo.yres, 5, 2, (scrinfo.bits_per_pixel / 8)); + assert(vncscr != NULL); + + vncscr->desktopName = "Android"; + vncscr->frameBuffer = (char *)vncbuf; + vncscr->alwaysShared = TRUE; + vncscr->httpDir = NULL; + vncscr->port = VNC_PORT; + + vncscr->kbdAddEvent = keyevent; + vncscr->ptrAddEvent = ptrevent; + + rfbInitServer(vncscr); + + /* Mark as dirty since we haven't sent any updates at all yet. */ + rfbMarkRectAsModified(vncscr, 0, 0, scrinfo.xres, scrinfo.yres); + + /* No idea. */ + varblock.r_offset = scrinfo.red.offset + scrinfo.red.length - 5; + varblock.g_offset = scrinfo.green.offset + scrinfo.green.length - 5; + varblock.b_offset = scrinfo.blue.offset + scrinfo.blue.length - 5; + varblock.rfb_xres = scrinfo.yres; + varblock.rfb_maxy = scrinfo.xres - 1; +} + +/*****************************************************************************/ +void injectKeyEvent(uint16_t code, uint16_t value) +{ + struct input_event ev; + memset(&ev, 0, sizeof(ev)); + gettimeofday(&ev.time,0); + ev.type = EV_KEY; + ev.code = code; + ev.value = value; + if(write(kbdfd, &ev, sizeof(ev)) < 0) + { + printf("write event failed, %s\n", strerror(errno)); + } + + printf("injectKey (%d, %d)\n", code , value); +} + +static int keysym2scancode(rfbBool down, rfbKeySym key, rfbClientPtr cl) +{ + int scancode = 0; + + int code = (int)key; + if (code>='0' && code<='9') { + scancode = (code & 0xF) - 1; + if (scancode<0) scancode += 10; + scancode += KEY_1; + } else if (code>=0xFF50 && code<=0xFF58) { + static const uint16_t map[] = + { KEY_HOME, KEY_LEFT, KEY_UP, KEY_RIGHT, KEY_DOWN, + KEY_SOFT1, KEY_SOFT2, KEY_END, 0 }; + scancode = map[code & 0xF]; + } else if (code>=0xFFE1 && code<=0xFFEE) { + static const uint16_t map[] = + { KEY_LEFTSHIFT, KEY_LEFTSHIFT, + KEY_COMPOSE, KEY_COMPOSE, + KEY_LEFTSHIFT, KEY_LEFTSHIFT, + 0,0, + KEY_LEFTALT, KEY_RIGHTALT, + 0, 0, 0, 0 }; + scancode = map[code & 0xF]; + } else if ((code>='A' && code<='Z') || (code>='a' && code<='z')) { + static const uint16_t map[] = { + KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, + KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, + KEY_K, KEY_L, KEY_M, KEY_N, KEY_O, + KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, + KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z }; + scancode = map[(code & 0x5F) - 'A']; + } else { + switch (code) { + case 0x0003: scancode = KEY_CENTER; break; + case 0x0020: scancode = KEY_SPACE; break; + case 0x0023: scancode = KEY_SHARP; break; + case 0x0033: scancode = KEY_SHARP; break; + case 0x002C: scancode = KEY_COMMA; break; + case 0x003C: scancode = KEY_COMMA; break; + case 0x002E: scancode = KEY_DOT; break; + case 0x003E: scancode = KEY_DOT; break; + case 0x002F: scancode = KEY_SLASH; break; + case 0x003F: scancode = KEY_SLASH; break; + case 0x0032: scancode = KEY_EMAIL; break; + case 0x0040: scancode = KEY_EMAIL; break; + case 0xFF08: scancode = KEY_BACKSPACE; break; + case 0xFF1B: scancode = KEY_BACK; break; + case 0xFF09: scancode = KEY_TAB; break; + case 0xFF0D: scancode = KEY_ENTER; break; + case 0x002A: scancode = KEY_STAR; break; + case 0xFFBE: scancode = KEY_F1; break; // F1 + case 0xFFBF: scancode = KEY_F2; break; // F2 + case 0xFFC0: scancode = KEY_F3; break; // F3 + case 0xFFC5: scancode = KEY_F4; break; // F8 + case 0xFFC8: rfbShutdownServer(cl->screen,TRUE); break; // F11 + } + } + + return scancode; +} + +static void keyevent(rfbBool down, rfbKeySym key, rfbClientPtr cl) +{ + int scancode; + + printf("Got keysym: %04x (down=%d)\n", (unsigned int)key, (int)down); + + if ((scancode = keysym2scancode(down, key, cl))) + { + injectKeyEvent(scancode, down); + } +} + +void injectTouchEvent(int down, int x, int y) +{ + struct input_event ev; + + // Calculate the final x and y + /* Fake touch screen always reports zero */ + if (xmin != 0 && xmax != 0 && ymin != 0 && ymax != 0) + { + x = xmin + (x * (xmax - xmin)) / (scrinfo.xres); + y = ymin + (y * (ymax - ymin)) / (scrinfo.yres); + } + + memset(&ev, 0, sizeof(ev)); + + // Then send a BTN_TOUCH + gettimeofday(&ev.time,0); + ev.type = EV_KEY; + ev.code = BTN_TOUCH; + ev.value = down; + if(write(touchfd, &ev, sizeof(ev)) < 0) + { + printf("write event failed, %s\n", strerror(errno)); + } + + // Then send the X + gettimeofday(&ev.time,0); + ev.type = EV_ABS; + ev.code = ABS_X; + ev.value = x; + if(write(touchfd, &ev, sizeof(ev)) < 0) + { + printf("write event failed, %s\n", strerror(errno)); + } + + // Then send the Y + gettimeofday(&ev.time,0); + ev.type = EV_ABS; + ev.code = ABS_Y; + ev.value = y; + if(write(touchfd, &ev, sizeof(ev)) < 0) + { + printf("write event failed, %s\n", strerror(errno)); + } + + // Finally send the SYN + gettimeofday(&ev.time,0); + ev.type = EV_SYN; + ev.code = 0; + ev.value = 0; + if(write(touchfd, &ev, sizeof(ev)) < 0) + { + printf("write event failed, %s\n", strerror(errno)); + } + + printf("injectTouchEvent (x=%d, y=%d, down=%d)\n", x , y, down); +} + +static void ptrevent(int buttonMask, int x, int y, rfbClientPtr cl) +{ + /* Indicates either pointer movement or a pointer button press or release. The pointer is +now at (x-position, y-position), and the current state of buttons 1 to 8 are represented +by bits 0 to 7 of button-mask respectively, 0 meaning up, 1 meaning down (pressed). +On a conventional mouse, buttons 1, 2 and 3 correspond to the left, middle and right +buttons on the mouse. On a wheel mouse, each step of the wheel upwards is represented +by a press and release of button 4, and each step downwards is represented by +a press and release of button 5. + From: http://www.vislab.usyd.edu.au/blogs/index.php/2009/05/22/an-headerless-indexed-protocol-for-input-1?blog=61 */ + + //printf("Got ptrevent: %04x (x=%d, y=%d)\n", buttonMask, x, y); + if(buttonMask & 1) { + // Simulate left mouse event as touch event + injectTouchEvent(1, x, y); + injectTouchEvent(0, x, y); + } +} + +#define PIXEL_FB_TO_RFB(p,r,g,b) ((p>>r)&0x1f001f)|(((p>>g)&0x1f001f)<<5)|(((p>>b)&0x1f001f)<<10) + +static void update_screen(void) +{ + unsigned int *f, *c, *r; + int x, y; + + varblock.min_i = varblock.min_j = 9999; + varblock.max_i = varblock.max_j = -1; + + f = (unsigned int *)fbmmap; /* -> framebuffer */ + c = (unsigned int *)fbbuf; /* -> compare framebuffer */ + r = (unsigned int *)vncbuf; /* -> remote framebuffer */ + + for (y = 0; y < scrinfo.yres; y++) + { + /* Compare every 2 pixels at a time, assuming that changes are likely + * in pairs. */ + for (x = 0; x < scrinfo.xres; x += 2) + { + unsigned int pixel = *f; + + if (pixel != *c) + { + *c = pixel; + + /* XXX: Undo the checkered pattern to test the efficiency + * gain using hextile encoding. */ + if (pixel == 0x18e320e4 || pixel == 0x20e418e3) + pixel = 0x18e318e3; + + *r = PIXEL_FB_TO_RFB(pixel, + varblock.r_offset, varblock.g_offset, varblock.b_offset); + + if (x < varblock.min_i) + varblock.min_i = x; + else + { + if (x > varblock.max_i) + varblock.max_i = x; + + if (y > varblock.max_j) + varblock.max_j = y; + else if (y < varblock.min_j) + varblock.min_j = y; + } + } + + f++, c++; + r++; + } + } + + if (varblock.min_i < 9999) + { + if (varblock.max_i < 0) + varblock.max_i = varblock.min_i; + + if (varblock.max_j < 0) + varblock.max_j = varblock.min_j; + + fprintf(stderr, "Dirty page: %dx%d+%d+%d...\n", + (varblock.max_i+2) - varblock.min_i, (varblock.max_j+1) - varblock.min_j, + varblock.min_i, varblock.min_j); + + rfbMarkRectAsModified(vncscr, varblock.min_i, varblock.min_j, + varblock.max_i + 2, varblock.max_j + 1); + + rfbProcessEvents(vncscr, 10000); + } +} + +/*****************************************************************************/ + +void print_usage(char **argv) +{ + printf("%s [-k device] [-t device] [-h]\n" + "-k device: keyboard device node, default is /dev/input/event3\n" + "-t device: touch device node, default is /dev/input/event1\n" + "-h : print this help\n"); +} + +int main(int argc, char **argv) +{ + if(argc > 1) + { + int i=1; + while(i < argc) + { + if(*argv[i] == '-') + { + switch(*(argv[i] + 1)) + { + case 'h': + print_usage(argv); + exit(0); + break; + case 'k': + i++; + strcpy(KBD_DEVICE, argv[i]); + break; + case 't': + i++; + strcpy(TOUCH_DEVICE, argv[i]); + break; + } + } + i++; + } + } + + printf("Initializing framebuffer device " FB_DEVICE "...\n"); + init_fb(); + printf("Initializing keyboard device %s ...\n", KBD_DEVICE); + init_kbd(); + printf("Initializing touch device %s ...\n", TOUCH_DEVICE); + init_touch(); + + printf("Initializing VNC server:\n"); + printf(" width: %d\n", (int)scrinfo.xres); + printf(" height: %d\n", (int)scrinfo.yres); + printf(" bpp: %d\n", (int)scrinfo.bits_per_pixel); + printf(" port: %d\n", (int)VNC_PORT); + init_fb_server(argc, argv); + + /* Implement our own event loop to detect changes in the framebuffer. */ + while (1) + { + while (vncscr->clientHead == NULL) + rfbProcessEvents(vncscr, 100000); + + rfbProcessEvents(vncscr, 100000); + update_screen(); + } + + printf("Cleaning up...\n"); + cleanup_fb(); + cleanup_kdb(); + cleanup_touch(); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/backchannel.c b/jni/vnc/LibVNCServer-0.9.9/examples/backchannel.c new file mode 100644 index 0000000..c625753 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/backchannel.c @@ -0,0 +1,116 @@ +#include + +/** + * @example backchannel.c + * This is a simple example demonstrating a protocol extension. + * + * The "back channel" permits sending commands between client and server. + * It works by sending plain text messages. + * + * As suggested in the RFB protocol, the back channel is enabled by asking + * for a "pseudo encoding", and enabling the back channel on the client side + * as soon as it gets a back channel message from the server. + * + * This implements the server part. + * + * Note: If you design your own extension and want it to be useful for others, + * too, you should make sure that + * + * - your server as well as your client can speak to other clients and + * servers respectively (i.e. they are nice if they are talking to a + * program which does not know about your extension). + * + * - if the machine is little endian, all 16-bit and 32-bit integers are + * swapped before they are sent and after they are received. + * + */ + +#define rfbBackChannel 155 + +typedef struct backChannelMsg { + uint8_t type; + uint8_t pad1; + uint16_t pad2; + uint32_t size; +} backChannelMsg; + +rfbBool enableBackChannel(rfbClientPtr cl, void** data, int encoding) +{ + if(encoding == rfbBackChannel) { + backChannelMsg msg; + const char* text="Server acknowledges back channel encoding\n"; + uint32_t length = strlen(text)+1; + int n; + + rfbLog("Enabling the back channel\n"); + + msg.type = rfbBackChannel; + msg.size = Swap32IfLE(length); + if((n = rfbWriteExact(cl, (char*)&msg, sizeof(msg))) <= 0 || + (n = rfbWriteExact(cl, text, length)) <= 0) { + rfbLogPerror("enableBackChannel: write"); + } + return TRUE; + } + return FALSE; +} + +static rfbBool handleBackChannelMessage(rfbClientPtr cl, void* data, + const rfbClientToServerMsg* message) +{ + if(message->type == rfbBackChannel) { + backChannelMsg msg; + char* text; + int n; + if((n = rfbReadExact(cl, ((char*)&msg)+1, sizeof(backChannelMsg)-1)) <= 0) { + if(n != 0) + rfbLogPerror("handleBackChannelMessage: read"); + rfbCloseClient(cl); + return TRUE; + } + msg.size = Swap32IfLE(msg.size); + if((text = malloc(msg.size)) == NULL) { + rfbErr("Could not allocate %d bytes\n", msg.size); + return TRUE; + } + if((n = rfbReadExact(cl, text, msg.size)) <= 0) { + if(n != 0) + rfbLogPerror("handleBackChannelMessage: read"); + rfbCloseClient(cl); + return TRUE; + } + rfbLog("got message:\n%s\n", text); + free(text); + return TRUE; + } + return FALSE; +} + +static int backChannelEncodings[] = {rfbBackChannel, 0}; + +static rfbProtocolExtension backChannelExtension = { + NULL, /* newClient */ + NULL, /* init */ + backChannelEncodings, /* pseudoEncodings */ + enableBackChannel, /* enablePseudoEncoding */ + handleBackChannelMessage, /* handleMessage */ + NULL, /* close */ + NULL, /* usage */ + NULL, /* processArgument */ + NULL /* next extension */ +}; + +int main(int argc,char** argv) +{ + rfbScreenInfoPtr server; + + rfbRegisterProtocolExtension(&backChannelExtension); + + server=rfbGetScreen(&argc,argv,400,300,8,3,4); + if(!server) + return 0; + server->frameBuffer=(char*)malloc(400*300*4); + rfbInitServer(server); + rfbRunEventLoop(server,-1,FALSE); + return(0); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/blooptest.c b/jni/vnc/LibVNCServer-0.9.9/examples/blooptest.c new file mode 100644 index 0000000..f0e411c --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/blooptest.c @@ -0,0 +1,2 @@ +#define BACKGROUND_LOOP_TEST +#include "example.c" diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/camera.c b/jni/vnc/LibVNCServer-0.9.9/examples/camera.c new file mode 100644 index 0000000..58ab1c3 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/camera.c @@ -0,0 +1,155 @@ + +/** + * @example camera.c + * Question: I need to display a live camera image via VNC. Until now I just + * grab an image, set the rect to modified and do a 0.1 s sleep to give the + * system time to transfer the data. + * This is obviously a solution which doesn't scale very well to different + * connection speeds/cpu horsepowers, so I wonder if there is a way for the + * server application to determine if the updates have been sent. This would + * cause the live image update rate to always be the maximum the connection + * supports while avoiding excessive loads. + * + * Thanks in advance, + * + * + * Christian Daschill + * + * + * Answer: Originally, I thought about using seperate threads and using a + * mutex to determine when the frame buffer was being accessed by any client + * so we could determine a safe time to take a picture. The probem is, we + * are lock-stepping everything with framebuffer access. Why not be a + * single-thread application and in-between rfbProcessEvents perform a + * camera snapshot. And this is what I do here. It guarantees that the + * clients have been serviced before taking another picture. + * + * The downside to this approach is that the more clients you have, there is + * less time available for you to service the camera equating to reduced + * frame rate. (or, your clients are on really slow links). Increasing your + * systems ethernet transmit queues may help improve the overall performance + * as the libvncserver should not stall on transmitting to any single + * client. + * + * Another solution would be to provide a seperate framebuffer for each + * client and use mutexes to determine if any particular client is ready for + * a snapshot. This way, your not updating a framebuffer for a slow client + * while it is being transferred. + */ + +#include +#include +#include +#include + + +#define WIDTH 640 +#define HEIGHT 480 +#define BPP 4 + +/* 15 frames per second (if we can) */ +#define PICTURE_TIMEOUT (1.0/15.0) + + +/* + * throttle camera updates +*/ +int TimeToTakePicture() { + static struct timeval now={0,0}, then={0,0}; + double elapsed, dnow, dthen; + + gettimeofday(&now,NULL); + + dnow = now.tv_sec + (now.tv_usec /1000000.0); + dthen = then.tv_sec + (then.tv_usec/1000000.0); + elapsed = dnow - dthen; + + if (elapsed > PICTURE_TIMEOUT) + memcpy((char *)&then, (char *)&now, sizeof(struct timeval)); + return elapsed > PICTURE_TIMEOUT; +} + + + +/* + * simulate grabbing a picture from some device + */ +int TakePicture(unsigned char *buffer) +{ + static int last_line=0, fps=0, fcount=0; + int line=0; + int i,j; + struct timeval now; + + /* + * simulate grabbing data from a device by updating the entire framebuffer + */ + + for(j=0;jHEIGHT) line=HEIGHT-1; + memset(&buffer[(WIDTH * BPP) * line], 0, (WIDTH * BPP)); + + /* frames per second (informational only) */ + fcount++; + if (last_line > line) { + fps = fcount; + fcount = 0; + } + last_line = line; + fprintf(stderr,"%03d/%03d Picture (%03d fps)\r", line, HEIGHT, fps); + + /* success! We have a new picture! */ + return (1==1); +} + + + + +/* + * Single-threaded application that interleaves client servicing with taking + * pictures from the camera. This way, we do not update the framebuffer + * while an encoding is working on it too (banding, and image artifacts). + */ +int main(int argc,char** argv) +{ + long usec; + + rfbScreenInfoPtr server=rfbGetScreen(&argc,argv,WIDTH,HEIGHT,8,3,BPP); + if(!server) + return 0; + server->desktopName = "Live Video Feed Example"; + server->frameBuffer=(char*)malloc(WIDTH*HEIGHT*BPP); + server->alwaysShared=(1==1); + + /* Initialize the server */ + rfbInitServer(server); + + /* Loop, processing clients and taking pictures */ + while (rfbIsActive(server)) { + if (TimeToTakePicture()) + if (TakePicture((unsigned char *)server->frameBuffer)) + rfbMarkRectAsModified(server,0,0,WIDTH,HEIGHT); + + usec = server->deferUpdateTime*1000; + rfbProcessEvents(server,usec); + } + return(0); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/colourmaptest.c b/jni/vnc/LibVNCServer-0.9.9/examples/colourmaptest.c new file mode 100644 index 0000000..20ea303 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/colourmaptest.c @@ -0,0 +1,33 @@ +#include + + +int main(int argc,char** argv) +{ + int i; + uint8_t bytes[256*3]; + + rfbScreenInfoPtr server=rfbGetScreen(&argc,argv,256,256,8,1,1); + if(!server) + return 0; + server->serverFormat.trueColour=FALSE; + server->colourMap.count=256; + server->colourMap.is16=FALSE; + for(i=0;i<256;i++) { + bytes[i*3+0]=255-i; /* red */ + bytes[i*3+1]=0; /* green */ + bytes[i*3+2]=i; /* blue */ + } + bytes[128*3+0]=0xff; + bytes[128*3+1]=0; + bytes[128*3+2]=0; + server->colourMap.data.bytes=bytes; + + server->frameBuffer=(char*)malloc(256*256); + for(i=0;i<256*256;i++) + server->frameBuffer[i]=(i/256); + + rfbInitServer(server); + rfbRunEventLoop(server,-1,FALSE); + + return(0); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/example.c b/jni/vnc/LibVNCServer-0.9.9/examples/example.c new file mode 100644 index 0000000..fc156c0 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/example.c @@ -0,0 +1,337 @@ +/** + * @example example.c + * This is an example of how to use libvncserver. + * + * libvncserver example + * Copyright (C) 2001 Johannes E. Schindelin + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#ifdef WIN32 +#define sleep Sleep +#else +#include +#endif + +#ifdef __IRIX__ +#include +#endif + +#include +#include + +static const int bpp=4; +static int maxx=800, maxy=600; +/* TODO: odd maxx doesn't work (vncviewer bug) */ + +/* This initializes a nice (?) background */ + +static void initBuffer(unsigned char* buffer) +{ + int i,j; + for(j=0;jclientData); +} + +static enum rfbNewClientAction newclient(rfbClientPtr cl) +{ + cl->clientData = (void*)calloc(sizeof(ClientData),1); + cl->clientGoneHook = clientgone; + return RFB_CLIENT_ACCEPT; +} + +/* switch to new framebuffer contents */ + +static void newframebuffer(rfbScreenInfoPtr screen, int width, int height) +{ + unsigned char *oldfb, *newfb; + + maxx = width; + maxy = height; + oldfb = (unsigned char*)screen->frameBuffer; + newfb = (unsigned char*)malloc(maxx * maxy * bpp); + initBuffer(newfb); + rfbNewFramebuffer(screen, (char*)newfb, maxx, maxy, 8, 3, bpp); + free(oldfb); + + /*** FIXME: Re-install cursor. ***/ +} + +/* aux function to draw a line */ + +static void drawline(unsigned char* buffer,int rowstride,int bpp,int x1,int y1,int x2,int y2) +{ + int i,j; + i=x1-x2; j=y1-y2; + if(i==0 && j==0) { + for(i=0;iy2) { i=y2; y2=y1; y1=i; i=x2; x2=x1; x1=i; } + for(j=y1;j<=y2;j++) + for(i=0;ix2) { i=y2; y2=y1; y1=i; i=x2; x2=x1; x1=i; } + for(i=x1;i<=x2;i++) + for(j=0;jclientData; + + if(x>=0 && y>=0 && xoldButton==buttonMask) { /* draw a line */ + drawline((unsigned char*)cl->screen->frameBuffer,cl->screen->paddedWidthInBytes,bpp, + x,y,cd->oldx,cd->oldy); + x1=x; y1=y; + if(x1>cd->oldx) x1++; else cd->oldx++; + if(y1>cd->oldy) y1++; else cd->oldy++; + rfbMarkRectAsModified(cl->screen,x,y,cd->oldx,cd->oldy); + } else { /* draw a point (diameter depends on button) */ + int w=cl->screen->paddedWidthInBytes; + x1=x-buttonMask; if(x1<0) x1=0; + x2=x+buttonMask; if(x2>maxx) x2=maxx; + y1=y-buttonMask; if(y1<0) y1=0; + y2=y+buttonMask; if(y2>maxy) y2=maxy; + + for(i=x1*bpp;iscreen->frameBuffer[j*w+i]=(char)0xff; + rfbMarkRectAsModified(cl->screen,x1,y1,x2,y2); + } + + /* we could get a selection like that: + rfbGotXCutText(cl->screen,"Hallo",5); + */ + } else + cd->oldButton=0; + + cd->oldx=x; cd->oldy=y; cd->oldButton=buttonMask; + } + rfbDefaultPtrAddEvent(buttonMask,x,y,cl); +} + +/* aux function to draw a character to x, y */ + +#include "radon.h" + +/* Here the key events are handled */ + +static void dokey(rfbBool down,rfbKeySym key,rfbClientPtr cl) +{ + if(down) { + if(key==XK_Escape) + rfbCloseClient(cl); + else if(key==XK_F12) + /* close down server, disconnecting clients */ + rfbShutdownServer(cl->screen,TRUE); + else if(key==XK_F11) + /* close down server, but wait for all clients to disconnect */ + rfbShutdownServer(cl->screen,FALSE); + else if(key==XK_Page_Up) { + initBuffer((unsigned char*)cl->screen->frameBuffer); + rfbMarkRectAsModified(cl->screen,0,0,maxx,maxy); + } else if (key == XK_Up) { + if (maxx < 1024) { + if (maxx < 800) { + newframebuffer(cl->screen, 800, 600); + } else { + newframebuffer(cl->screen, 1024, 768); + } + } + } else if(key==XK_Down) { + if (maxx > 640) { + if (maxx > 800) { + newframebuffer(cl->screen, 800, 600); + } else { + newframebuffer(cl->screen, 640, 480); + } + } + } else if(key>=' ' && key<0x100) { + ClientData* cd=cl->clientData; + int x1=cd->oldx,y1=cd->oldy,x2,y2; + cd->oldx+=rfbDrawCharWithClip(cl->screen,&radonFont,cd->oldx,cd->oldy,(char)key,0,0,cl->screen->width,cl->screen->height,0x00ffffff,0x00ffffff); + rfbFontBBox(&radonFont,(char)key,&x1,&y1,&x2,&y2); + rfbMarkRectAsModified(cl->screen,x1,y1,x2-1,y2-1); + } + } +} + +/* Example for an XCursor (foreground/background only) */ + +#ifdef JUST_AN_EXAMPLE + +static int exampleXCursorWidth=9,exampleXCursorHeight=7; +static char exampleXCursor[]= + " " + " xx xx " + " xx xx " + " xxx " + " xx xx " + " xx xx " + " "; + +#endif + +/* Example for a rich cursor (full-colour) */ + +static void MakeRichCursor(rfbScreenInfoPtr rfbScreen) +{ + int i,j,w=32,h=32; + rfbCursorPtr c = rfbScreen->cursor; + char bitmap[]= + " " + " xxxxxx " + " xxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxx " + " xxxxx xxxxxxxx xxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxx xxxxxxxxxxx xxxxxxx " + " xxxx xxxxxxxxx xxxxxx " + " xxxxx xxxxxxxxxxx xxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxx xxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxx xxxxxxxxxxxxxx " + " xxxxxxxxxx xxxxxxxxxxxx " + " xxxxxxxxx xxxxxxxxx " + " xxxxxxxxxx xxxxxxxxx " + " xxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxx " + " xxxx xxxxxxxxxxxxx " + " xx x xxxxxxxxxxx " + " xxx xxxxxxxxxxx " + " xxxx xxxxxxxxxxx " + " xxxxxx xxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxx " + " "; + c=rfbScreen->cursor = rfbMakeXCursor(w,h,bitmap,bitmap); + c->xhot = 16; c->yhot = 24; + + c->richSource = (unsigned char*)malloc(w*h*bpp); + c->cleanupRichSource = TRUE; + for(j=0;jrichSource[j*w*bpp+i*bpp+0]=i*0xff/w; + c->richSource[j*w*bpp+i*bpp+1]=(i+j)*0xff/(w+h); + c->richSource[j*w*bpp+i*bpp+2]=j*0xff/h; + c->richSource[j*w*bpp+i*bpp+3]=0; + } + } +} + +/* Initialization */ + +int main(int argc,char** argv) +{ + rfbScreenInfoPtr rfbScreen = rfbGetScreen(&argc,argv,maxx,maxy,8,3,bpp); + if(!rfbScreen) + return 0; + rfbScreen->desktopName = "LibVNCServer Example"; + rfbScreen->frameBuffer = (char*)malloc(maxx*maxy*bpp); + rfbScreen->alwaysShared = TRUE; + rfbScreen->ptrAddEvent = doptr; + rfbScreen->kbdAddEvent = dokey; + rfbScreen->newClientHook = newclient; + rfbScreen->httpDir = "../webclients"; + rfbScreen->httpEnableProxyConnect = TRUE; + + initBuffer((unsigned char*)rfbScreen->frameBuffer); + rfbDrawString(rfbScreen,&radonFont,20,100,"Hello, World!",0xffffff); + + /* This call creates a mask and then a cursor: */ + /* rfbScreen->defaultCursor = + rfbMakeXCursor(exampleCursorWidth,exampleCursorHeight,exampleCursor,0); + */ + + MakeRichCursor(rfbScreen); + + /* initialize the server */ + rfbInitServer(rfbScreen); + +#ifndef BACKGROUND_LOOP_TEST +#ifdef USE_OWN_LOOP + { + int i; + for(i=0;rfbIsActive(rfbScreen);i++) { + fprintf(stderr,"%d\r",i); + rfbProcessEvents(rfbScreen,100000); + } + } +#else + /* this is the blocking event loop, i.e. it never returns */ + /* 40000 are the microseconds to wait on select(), i.e. 0.04 seconds */ + rfbRunEventLoop(rfbScreen,40000,FALSE); +#endif /* OWN LOOP */ +#else +#if !defined(LIBVNCSERVER_HAVE_LIBPTHREAD) +#error "I need pthreads for that." +#endif + + /* this is the non-blocking event loop; a background thread is started */ + rfbRunEventLoop(rfbScreen,-1,TRUE); + fprintf(stderr, "Running background loop...\n"); + /* now we could do some cool things like rendering in idle time */ + while(1) sleep(5); /* render(); */ +#endif /* BACKGROUND_LOOP */ + + free(rfbScreen->frameBuffer); + rfbScreenCleanup(rfbScreen); + + return(0); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/filetransfer.c b/jni/vnc/LibVNCServer-0.9.9/examples/filetransfer.c new file mode 100644 index 0000000..2d03fe1 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/filetransfer.c @@ -0,0 +1,17 @@ +/** + * @example filetransfer.c + */ + +#include + +int main(int argc,char** argv) +{ + rfbScreenInfoPtr server=rfbGetScreen(&argc,argv,400,300,8,3,4); + if(!server) + return 0; + server->frameBuffer=(char*)malloc(400*300*4); + rfbRegisterTightVNCFileTransferExtension(); + rfbInitServer(server); + rfbRunEventLoop(server,-1,FALSE); + return(0); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/fontsel.c b/jni/vnc/LibVNCServer-0.9.9/examples/fontsel.c new file mode 100644 index 0000000..15139dc --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/fontsel.c @@ -0,0 +1,76 @@ +#include + +#define FONTDIR "/usr/lib/kbd/consolefonts/" +#define DEFAULTFONT FONTDIR "default8x16" + +static char *fontlist[50]={ +"8x16alt", "b.fnt", "c.fnt", "default8x16", "m.fnt", "ml.fnt", "mod_d.fnt", +"mod_s.fnt", "mr.fnt", "mu.fnt", "r.fnt", "rl.fnt", "ro.fnt", "s.fnt", +"sc.fnt", "scrawl_s.fnt", "scrawl_w.fnt", "sd.fnt", "t.fnt", + NULL +}; + +static rfbScreenInfoPtr rfbScreen = NULL; +static rfbFontDataPtr curFont = NULL; +static void showFont(int index) +{ + char buffer[1024]; + + if(!rfbScreen) return; + + if(curFont) + rfbFreeFont(curFont); + + strcpy(buffer,FONTDIR); + strcat(buffer,fontlist[index]); + curFont = rfbLoadConsoleFont(buffer); + + rfbFillRect(rfbScreen,210,30-20,210+10*16,30-20+256*20/16,0xb77797); + if(curFont) { + int i,j; + for(j=0;j<256;j+=16) + for(i=0;i<16;i++) + rfbDrawCharWithClip(rfbScreen,curFont,210+10*i,30+j*20/16,j+i, + 0,0,640,480,0xffffff,0x000000); + } +} + +int main(int argc,char** argv) +{ + rfbFontDataPtr font; + rfbScreenInfoPtr s=rfbGetScreen(&argc,argv,640,480,8,3,3); + int i,j; + + if(!s) + return 0; + + s->frameBuffer=(char*)malloc(640*480*3); + rfbInitServer(s); + + for(j=0;j<480;j++) + for(i=0;i<640;i++) { + s->frameBuffer[(j*640+i)*3+0]=j*256/480; + s->frameBuffer[(j*640+i)*3+1]=i*256/640; + s->frameBuffer[(j*640+i)*3+2]=(i+j)*256/(480+640); + } + + rfbScreen = s; + font=rfbLoadConsoleFont(DEFAULTFONT); + if(!font) { + rfbErr("Couldn't find %s\n",DEFAULTFONT); + exit(1); + } + + for(j=0;j<0 && rfbIsActive(s);j++) + rfbProcessEvents(s,900000); + + i = rfbSelectBox(s,font,fontlist,10,20,200,300,0xffdfdf,0x602040,2,showFont); + rfbLog("Selection: %d: %s\n",i,(i>=0)?fontlist[i]:"cancelled"); + + rfbFreeFont(font); + free(s->frameBuffer); + rfbScreenCleanup(s); + + return(0); +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/mac.c b/jni/vnc/LibVNCServer-0.9.9/examples/mac.c new file mode 100644 index 0000000..1c85d73 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/mac.c @@ -0,0 +1,553 @@ + +/* + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * Cut in two parts by Johannes Schindelin (2001): libvncserver and OSXvnc. + * + * + * This file implements every system specific function for Mac OS X. + * + * It includes the keyboard functions: + * + void KbdAddEvent(down, keySym, cl) + rfbBool down; + rfbKeySym keySym; + rfbClientPtr cl; + void KbdReleaseAllKeys() + * + * the mouse functions: + * + void PtrAddEvent(buttonMask, x, y, cl) + int buttonMask; + int x; + int y; + rfbClientPtr cl; + * + */ + +#include +#include +#include +/* zlib doesn't like Byte already defined */ +#undef Byte +#undef TRUE +#undef rfbBool +#include +#include + +#include +#include +#include +#include +#include + +rfbBool rfbNoDimming = FALSE; +rfbBool rfbNoSleep = TRUE; + +static pthread_mutex_t dimming_mutex; +static unsigned long dim_time; +static unsigned long sleep_time; +static mach_port_t master_dev_port; +static io_connect_t power_mgt; +static rfbBool initialized = FALSE; +static rfbBool dim_time_saved = FALSE; +static rfbBool sleep_time_saved = FALSE; + +static int +saveDimSettings(void) +{ + if (IOPMGetAggressiveness(power_mgt, + kPMMinutesToDim, + &dim_time) != kIOReturnSuccess) + return -1; + + dim_time_saved = TRUE; + return 0; +} + +static int +restoreDimSettings(void) +{ + if (!dim_time_saved) + return -1; + + if (IOPMSetAggressiveness(power_mgt, + kPMMinutesToDim, + dim_time) != kIOReturnSuccess) + return -1; + + dim_time_saved = FALSE; + dim_time = 0; + return 0; +} + +static int +saveSleepSettings(void) +{ + if (IOPMGetAggressiveness(power_mgt, + kPMMinutesToSleep, + &sleep_time) != kIOReturnSuccess) + return -1; + + sleep_time_saved = TRUE; + return 0; +} + +static int +restoreSleepSettings(void) +{ + if (!sleep_time_saved) + return -1; + + if (IOPMSetAggressiveness(power_mgt, + kPMMinutesToSleep, + sleep_time) != kIOReturnSuccess) + return -1; + + sleep_time_saved = FALSE; + sleep_time = 0; + return 0; +} + + +int +rfbDimmingInit(void) +{ + pthread_mutex_init(&dimming_mutex, NULL); + + if (IOMasterPort(bootstrap_port, &master_dev_port) != kIOReturnSuccess) + return -1; + + if (!(power_mgt = IOPMFindPowerManagement(master_dev_port))) + return -1; + + if (rfbNoDimming) { + if (saveDimSettings() < 0) + return -1; + if (IOPMSetAggressiveness(power_mgt, + kPMMinutesToDim, 0) != kIOReturnSuccess) + return -1; + } + + if (rfbNoSleep) { + if (saveSleepSettings() < 0) + return -1; + if (IOPMSetAggressiveness(power_mgt, + kPMMinutesToSleep, 0) != kIOReturnSuccess) + return -1; + } + + initialized = TRUE; + return 0; +} + + +int +rfbUndim(void) +{ + int result = -1; + + pthread_mutex_lock(&dimming_mutex); + + if (!initialized) + goto DONE; + + if (!rfbNoDimming) { + if (saveDimSettings() < 0) + goto DONE; + if (IOPMSetAggressiveness(power_mgt, kPMMinutesToDim, 0) != kIOReturnSuccess) + goto DONE; + if (restoreDimSettings() < 0) + goto DONE; + } + + if (!rfbNoSleep) { + if (saveSleepSettings() < 0) + goto DONE; + if (IOPMSetAggressiveness(power_mgt, kPMMinutesToSleep, 0) != kIOReturnSuccess) + goto DONE; + if (restoreSleepSettings() < 0) + goto DONE; + } + + result = 0; + + DONE: + pthread_mutex_unlock(&dimming_mutex); + return result; +} + + +int +rfbDimmingShutdown(void) +{ + int result = -1; + + if (!initialized) + goto DONE; + + pthread_mutex_lock(&dimming_mutex); + if (dim_time_saved) + if (restoreDimSettings() < 0) + goto DONE; + if (sleep_time_saved) + if (restoreSleepSettings() < 0) + goto DONE; + + result = 0; + + DONE: + pthread_mutex_unlock(&dimming_mutex); + return result; +} + +rfbScreenInfoPtr rfbScreen; + +void rfbShutdown(rfbClientPtr cl); + +/* some variables to enable special behaviour */ +int startTime = -1, maxSecsToConnect = 0; +rfbBool disconnectAfterFirstClient = TRUE; + +/* Where do I get the "official" list of Mac key codes? + Ripped these out of a Mac II emulator called Basilisk II + that I found on the net. */ +static int keyTable[] = { + /* The alphabet */ + XK_A, 0, /* A */ + XK_B, 11, /* B */ + XK_C, 8, /* C */ + XK_D, 2, /* D */ + XK_E, 14, /* E */ + XK_F, 3, /* F */ + XK_G, 5, /* G */ + XK_H, 4, /* H */ + XK_I, 34, /* I */ + XK_J, 38, /* J */ + XK_K, 40, /* K */ + XK_L, 37, /* L */ + XK_M, 46, /* M */ + XK_N, 45, /* N */ + XK_O, 31, /* O */ + XK_P, 35, /* P */ + XK_Q, 12, /* Q */ + XK_R, 15, /* R */ + XK_S, 1, /* S */ + XK_T, 17, /* T */ + XK_U, 32, /* U */ + XK_V, 9, /* V */ + XK_W, 13, /* W */ + XK_X, 7, /* X */ + XK_Y, 16, /* Y */ + XK_Z, 6, /* Z */ + XK_a, 0, /* a */ + XK_b, 11, /* b */ + XK_c, 8, /* c */ + XK_d, 2, /* d */ + XK_e, 14, /* e */ + XK_f, 3, /* f */ + XK_g, 5, /* g */ + XK_h, 4, /* h */ + XK_i, 34, /* i */ + XK_j, 38, /* j */ + XK_k, 40, /* k */ + XK_l, 37, /* l */ + XK_m, 46, /* m */ + XK_n, 45, /* n */ + XK_o, 31, /* o */ + XK_p, 35, /* p */ + XK_q, 12, /* q */ + XK_r, 15, /* r */ + XK_s, 1, /* s */ + XK_t, 17, /* t */ + XK_u, 32, /* u */ + XK_v, 9, /* v */ + XK_w, 13, /* w */ + XK_x, 7, /* x */ + XK_y, 16, /* y */ + XK_z, 6, /* z */ + + /* Numbers */ + XK_0, 29, /* 0 */ + XK_1, 18, /* 1 */ + XK_2, 19, /* 2 */ + XK_3, 20, /* 3 */ + XK_4, 21, /* 4 */ + XK_5, 23, /* 5 */ + XK_6, 22, /* 6 */ + XK_7, 26, /* 7 */ + XK_8, 28, /* 8 */ + XK_9, 25, /* 9 */ + + /* Symbols */ + XK_exclam, 18, /* ! */ + XK_at, 19, /* @ */ + XK_numbersign, 20, /* # */ + XK_dollar, 21, /* $ */ + XK_percent, 23, /* % */ + XK_asciicircum, 22, /* ^ */ + XK_ampersand, 26, /* & */ + XK_asterisk, 28, /* * */ + XK_parenleft, 25, /* ( */ + XK_parenright, 29, /* ) */ + XK_minus, 27, /* - */ + XK_underscore, 27, /* _ */ + XK_equal, 24, /* = */ + XK_plus, 24, /* + */ + XK_grave, 10, /* ` */ /* XXX ? */ + XK_asciitilde, 10, /* ~ */ + XK_bracketleft, 33, /* [ */ + XK_braceleft, 33, /* { */ + XK_bracketright, 30, /* ] */ + XK_braceright, 30, /* } */ + XK_semicolon, 41, /* ; */ + XK_colon, 41, /* : */ + XK_apostrophe, 39, /* ' */ + XK_quotedbl, 39, /* " */ + XK_comma, 43, /* , */ + XK_less, 43, /* < */ + XK_period, 47, /* . */ + XK_greater, 47, /* > */ + XK_slash, 44, /* / */ + XK_question, 44, /* ? */ + XK_backslash, 42, /* \ */ + XK_bar, 42, /* | */ + + /* "Special" keys */ + XK_space, 49, /* Space */ + XK_Return, 36, /* Return */ + XK_Delete, 117, /* Delete */ + XK_Tab, 48, /* Tab */ + XK_Escape, 53, /* Esc */ + XK_Caps_Lock, 57, /* Caps Lock */ + XK_Num_Lock, 71, /* Num Lock */ + XK_Scroll_Lock, 107, /* Scroll Lock */ + XK_Pause, 113, /* Pause */ + XK_BackSpace, 51, /* Backspace */ + XK_Insert, 114, /* Insert */ + + /* Cursor movement */ + XK_Up, 126, /* Cursor Up */ + XK_Down, 125, /* Cursor Down */ + XK_Left, 123, /* Cursor Left */ + XK_Right, 124, /* Cursor Right */ + XK_Page_Up, 116, /* Page Up */ + XK_Page_Down, 121, /* Page Down */ + XK_Home, 115, /* Home */ + XK_End, 119, /* End */ + + /* Numeric keypad */ + XK_KP_0, 82, /* KP 0 */ + XK_KP_1, 83, /* KP 1 */ + XK_KP_2, 84, /* KP 2 */ + XK_KP_3, 85, /* KP 3 */ + XK_KP_4, 86, /* KP 4 */ + XK_KP_5, 87, /* KP 5 */ + XK_KP_6, 88, /* KP 6 */ + XK_KP_7, 89, /* KP 7 */ + XK_KP_8, 91, /* KP 8 */ + XK_KP_9, 92, /* KP 9 */ + XK_KP_Enter, 76, /* KP Enter */ + XK_KP_Decimal, 65, /* KP . */ + XK_KP_Add, 69, /* KP + */ + XK_KP_Subtract, 78, /* KP - */ + XK_KP_Multiply, 67, /* KP * */ + XK_KP_Divide, 75, /* KP / */ + + /* Function keys */ + XK_F1, 122, /* F1 */ + XK_F2, 120, /* F2 */ + XK_F3, 99, /* F3 */ + XK_F4, 118, /* F4 */ + XK_F5, 96, /* F5 */ + XK_F6, 97, /* F6 */ + XK_F7, 98, /* F7 */ + XK_F8, 100, /* F8 */ + XK_F9, 101, /* F9 */ + XK_F10, 109, /* F10 */ + XK_F11, 103, /* F11 */ + XK_F12, 111, /* F12 */ + + /* Modifier keys */ + XK_Shift_L, 56, /* Shift Left */ + XK_Shift_R, 56, /* Shift Right */ + XK_Control_L, 59, /* Ctrl Left */ + XK_Control_R, 59, /* Ctrl Right */ + XK_Meta_L, 58, /* Logo Left (-> Option) */ + XK_Meta_R, 58, /* Logo Right (-> Option) */ + XK_Alt_L, 55, /* Alt Left (-> Command) */ + XK_Alt_R, 55, /* Alt Right (-> Command) */ + + /* Weirdness I can't figure out */ +#if 0 + XK_3270_PrintScreen, 105, /* PrintScrn */ + ??? 94, 50, /* International */ + XK_Menu, 50, /* Menu (-> International) */ +#endif +}; + +void +KbdAddEvent(rfbBool down, rfbKeySym keySym, struct _rfbClientRec* cl) +{ + int i; + CGKeyCode keyCode = -1; + int found = 0; + + if(((int)cl->clientData)==-1) return; /* viewOnly */ + + rfbUndim(); + + for (i = 0; i < (sizeof(keyTable) / sizeof(int)); i += 2) { + if (keyTable[i] == keySym) { + keyCode = keyTable[i+1]; + found = 1; + break; + } + } + + if (!found) { + rfbErr("warning: couldn't figure out keycode for X keysym %d (0x%x)\n", + (int)keySym, (int)keySym); + } else { + /* Hopefully I can get away with not specifying a CGCharCode. + (Why would you need both?) */ + CGPostKeyboardEvent((CGCharCode)0, keyCode, down); + } +} + +void +PtrAddEvent(buttonMask, x, y, cl) + int buttonMask; + int x; + int y; + rfbClientPtr cl; +{ + CGPoint position; + + if(((int)cl->clientData)==-1) return; /* viewOnly */ + + rfbUndim(); + + position.x = x; + position.y = y; + + CGPostMouseEvent(position, TRUE, 8, + (buttonMask & (1 << 0)) ? TRUE : FALSE, + (buttonMask & (1 << 1)) ? TRUE : FALSE, + (buttonMask & (1 << 2)) ? TRUE : FALSE, + (buttonMask & (1 << 3)) ? TRUE : FALSE, + (buttonMask & (1 << 4)) ? TRUE : FALSE, + (buttonMask & (1 << 5)) ? TRUE : FALSE, + (buttonMask & (1 << 6)) ? TRUE : FALSE, + (buttonMask & (1 << 7)) ? TRUE : FALSE); +} + +rfbBool viewOnly = FALSE, sharedMode = FALSE; + +void +ScreenInit(int argc, char**argv) +{ + int bitsPerSample=CGDisplayBitsPerSample(kCGDirectMainDisplay); + rfbScreen = rfbGetScreen(&argc,argv, + CGDisplayPixelsWide(kCGDirectMainDisplay), + CGDisplayPixelsHigh(kCGDirectMainDisplay), + bitsPerSample, + CGDisplaySamplesPerPixel(kCGDirectMainDisplay),4); + if(!rfbScreen) + exit(0); + rfbScreen->serverFormat.redShift = bitsPerSample*2; + rfbScreen->serverFormat.greenShift = bitsPerSample*1; + rfbScreen->serverFormat.blueShift = 0; + + gethostname(rfbScreen->thisHost, 255); + rfbScreen->paddedWidthInBytes = CGDisplayBytesPerRow(kCGDirectMainDisplay); + rfbScreen->frameBuffer = + (char *)CGDisplayBaseAddress(kCGDirectMainDisplay); + + /* we cannot write to the frame buffer */ + rfbScreen->cursor = NULL; + + rfbScreen->ptrAddEvent = PtrAddEvent; + rfbScreen->kbdAddEvent = KbdAddEvent; + + if(sharedMode) { + rfbScreen->alwaysShared = TRUE; + } + + rfbInitServer(rfbScreen); +} + +static void +refreshCallback(CGRectCount count, const CGRect *rectArray, void *ignore) +{ + int i; + + if(startTime>0 && time(0)>startTime+maxSecsToConnect) + rfbShutdown(0); + + for (i = 0; i < count; i++) + rfbMarkRectAsModified(rfbScreen, + rectArray[i].origin.x,rectArray[i].origin.y, + rectArray[i].origin.x + rectArray[i].size.width, + rectArray[i].origin.y + rectArray[i].size.height); +} + +void clientGone(rfbClientPtr cl) +{ + rfbShutdown(cl); +} + +enum rfbNewClientAction newClient(rfbClientPtr cl) +{ + if(startTime>0 && time(0)>startTime+maxSecsToConnect) + rfbShutdown(cl); + + if(disconnectAfterFirstClient) + cl->clientGoneHook = clientGone; + + cl->clientData=(void*)((viewOnly)?-1:0); + + return(RFB_CLIENT_ACCEPT); +} + +int main(int argc,char *argv[]) +{ + int i; + + for(i=argc-1;i>0;i--) + if(inewClientHook = newClient; + + /* enter background event loop */ + rfbRunEventLoop(rfbScreen,40,TRUE); + + /* enter OS X loop */ + CGRegisterScreenRefreshCallback(refreshCallback, NULL); + RunApplicationEventLoop(); + + rfbDimmingShutdown(); + + return(0); /* never ... */ +} + +void rfbShutdown(rfbClientPtr cl) +{ + rfbScreenCleanup(rfbScreen); + rfbDimmingShutdown(); + exit(0); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/pnmshow.c b/jni/vnc/LibVNCServer-0.9.9/examples/pnmshow.c new file mode 100644 index 0000000..dbb66ab --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/pnmshow.c @@ -0,0 +1,126 @@ +/** +* @example pnmshow.c +*/ +#include +#include +#include + +#ifndef HAVE_HANDLEKEY +static void HandleKey(rfbBool down,rfbKeySym key,rfbClientPtr cl) +{ + if(down && (key==XK_Escape || key=='q' || key=='Q')) + rfbCloseClient(cl); +} +#endif + +int main(int argc,char** argv) +{ + FILE* in=stdin; + int i,j,k,l,width,height,paddedWidth; + char buffer[1024]; + rfbScreenInfoPtr rfbScreen; + enum { BW, GRAY, TRUECOLOUR } picType=TRUECOLOUR; + int bytesPerPixel,bitsPerPixelInFile; + + if(argc>1) { + in=fopen(argv[1],"rb"); + if(!in) { + printf("Couldn't find file %s.\n",argv[1]); + exit(1); + } + } + + fgets(buffer,1024,in); + if(!strncmp(buffer,"P6",2)) { + picType=TRUECOLOUR; + bytesPerPixel=4; bitsPerPixelInFile=3*8; + } else if(!strncmp(buffer,"P5",2)) { + picType=GRAY; + bytesPerPixel=1; bitsPerPixelInFile=1*8; + } else if(!strncmp(buffer,"P4",2)) { + picType=BW; + bytesPerPixel=1; bitsPerPixelInFile=1; + } else { + printf("Not a ppm.\n"); + exit(2); + } + + /* skip comments */ + do { + fgets(buffer,1024,in); + } while(buffer[0]=='#'); + + /* get width & height */ + sscanf(buffer,"%d %d",&width,&height); + rfbLog("Got width %d and height %d.\n",width,height); + if(picType!=BW) + fgets(buffer,1024,in); + else + width=1+((width-1)|7); + + /* vncviewers have problems with widths which are no multiple of 4. */ + paddedWidth = width; + if(width&3) + paddedWidth+=4-(width&3); + + /* initialize data for vnc server */ + rfbScreen = rfbGetScreen(&argc,argv,paddedWidth,height,8,(bitsPerPixelInFile+7)/8,bytesPerPixel); + if(!rfbScreen) + return 0; + if(argc>1) + rfbScreen->desktopName = argv[1]; + else + rfbScreen->desktopName = "Picture"; + rfbScreen->alwaysShared = TRUE; + rfbScreen->kbdAddEvent = HandleKey; + + /* enable http */ + rfbScreen->httpDir = "../webclients"; + + /* allocate picture and read it */ + rfbScreen->frameBuffer = (char*)malloc(paddedWidth*bytesPerPixel*height); + fread(rfbScreen->frameBuffer,width*bitsPerPixelInFile/8,height,in); + fclose(in); + + if(picType!=TRUECOLOUR) { + rfbScreen->serverFormat.trueColour=FALSE; + rfbScreen->colourMap.count=256; + rfbScreen->colourMap.is16=FALSE; + rfbScreen->colourMap.data.bytes=malloc(256*3); + for(i=0;i<256;i++) + memset(rfbScreen->colourMap.data.bytes+3*i,i,3); + } + + switch(picType) { + case TRUECOLOUR: + /* correct the format to 4 bytes instead of 3 (and pad to paddedWidth) */ + for(j=height-1;j>=0;j--) { + for(i=width-1;i>=0;i--) + for(k=2;k>=0;k--) + rfbScreen->frameBuffer[(j*paddedWidth+i)*4+k]= + rfbScreen->frameBuffer[(j*width+i)*3+k]; + for(i=width*4;iframeBuffer[j*paddedWidth*4+i]=0; + } + break; + case GRAY: + break; + case BW: + /* correct the format from 1 bit to 8 bits */ + for(j=height-1;j>=0;j--) + for(i=width-1;i>=0;i-=8) { + l=(unsigned char)rfbScreen->frameBuffer[(j*width+i)/8]; + for(k=7;k>=0;k--) + rfbScreen->frameBuffer[j*paddedWidth+i+7-k]=(l&(1< +#include +#include + +#ifndef LIBVNCSERVER_ALLOW24BPP +int main() { + printf("I need the ALLOW24BPP LibVNCServer flag to work\n"); + exit(1); +} +#else + +static void HandleKey(rfbBool down,rfbKeySym key,rfbClientPtr cl) +{ + if(down && (key==XK_Escape || key=='q' || key=='Q')) + rfbCloseClient(cl); +} + +int main(int argc,char** argv) +{ + FILE* in=stdin; + int j,width,height,paddedWidth; + char buffer[1024]; + rfbScreenInfoPtr rfbScreen; + + if(argc>1) { + in=fopen(argv[1],"rb"); + if(!in) { + printf("Couldn't find file %s.\n",argv[1]); + exit(1); + } + } + + fgets(buffer,1024,in); + if(strncmp(buffer,"P6",2)) { + printf("Not a ppm.\n"); + exit(2); + } + + /* skip comments */ + do { + fgets(buffer,1024,in); + } while(buffer[0]=='#'); + + /* get width & height */ + sscanf(buffer,"%d %d",&width,&height); + rfbLog("Got width %d and height %d.\n",width,height); + fgets(buffer,1024,in); + + /* vncviewers have problems with widths which are no multiple of 4. */ + paddedWidth = width; + + /* if your vncviewer doesn't have problems with a width + which is not a multiple of 4, you can comment this. */ + if(width&3) + paddedWidth+=4-(width&3); + + /* initialize data for vnc server */ + rfbScreen = rfbGetScreen(&argc,argv,paddedWidth,height,8,3,3); + if(!rfbScreen) + return 0; + if(argc>1) + rfbScreen->desktopName = argv[1]; + else + rfbScreen->desktopName = "Picture"; + rfbScreen->alwaysShared = TRUE; + rfbScreen->kbdAddEvent = HandleKey; + + /* enable http */ + rfbScreen->httpDir = "../webclients"; + + /* allocate picture and read it */ + rfbScreen->frameBuffer = (char*)malloc(paddedWidth*3*height); + fread(rfbScreen->frameBuffer,width*3,height,in); + fclose(in); + + /* pad to paddedWidth */ + if(width != paddedWidth) { + int padCount = 3*(paddedWidth - width); + for(j=height-1;j>=0;j--) { + memmove(rfbScreen->frameBuffer+3*paddedWidth*j, + rfbScreen->frameBuffer+3*width*j, + 3*width); + memset(rfbScreen->frameBuffer+3*paddedWidth*(j+1)-padCount, + 0,padCount); + } + } + + /* initialize server */ + rfbInitServer(rfbScreen); + + /* run event loop */ + rfbRunEventLoop(rfbScreen,40000,FALSE); + + return(0); +} +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/radon.h b/jni/vnc/LibVNCServer-0.9.9/examples/radon.h new file mode 100644 index 0000000..b6209a9 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/radon.h @@ -0,0 +1,195 @@ +static unsigned char radonFontData[2280]={ +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 32 */ +0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x10,0x10,0x00,0x00, /* 33 */ +0x00,0x28,0x28,0x28,0x28,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 34 */ +0x00,0x44,0x44,0xba,0x44,0x44,0x44,0xba,0x44,0x44,0x00,0x00, /* 35 */ +0x10,0x7e,0x80,0x90,0x80,0x7c,0x02,0x12,0x02,0xfc,0x10,0x00, /* 36 */ +0x00,0x62,0x92,0x94,0x68,0x10,0x2c,0x52,0x92,0x8c,0x00,0x00, /* 37 */ +0x00,0x60,0x90,0x90,0x40,0x20,0x90,0x8a,0x84,0x7a,0x00,0x00, /* 38 */ +0x00,0x10,0x10,0x10,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 39 */ +0x00,0x08,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x08,0x00,0x00, /* 40 */ +0x00,0x10,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x10,0x00,0x00, /* 41 */ +0x00,0x10,0x92,0x54,0x10,0x10,0x54,0x92,0x10,0x00,0x00,0x00, /* 42 */ +0x00,0x00,0x10,0x10,0x10,0xd6,0x10,0x10,0x10,0x00,0x00,0x00, /* 43 */ +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x08,0x30,0x00, /* 44 */ +0x00,0x00,0x00,0x00,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x00, /* 45 */ +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x00,0x00, /* 46 */ +0x00,0x02,0x02,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x00,0x00, /* 47 */ +0x00,0x7c,0x82,0x82,0x82,0xba,0x82,0x82,0x82,0x7c,0x00,0x00, /* 48 */ +0x00,0x08,0x28,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00, /* 49 */ +0x00,0xfc,0x02,0x02,0x02,0x7c,0x80,0x80,0x00,0xfe,0x00,0x00, /* 50 */ +0x00,0xfc,0x02,0x02,0x02,0x3c,0x02,0x02,0x02,0xfc,0x00,0x00, /* 51 */ +0x00,0x82,0x82,0x82,0x82,0x7a,0x02,0x02,0x02,0x02,0x00,0x00, /* 52 */ +0x00,0xfe,0x00,0x80,0x80,0x7c,0x02,0x02,0x02,0xfc,0x00,0x00, /* 53 */ +0x00,0x7c,0x80,0x80,0xbc,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 54 */ +0x00,0xfc,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x00,0x00, /* 55 */ +0x00,0x7c,0x82,0x82,0x82,0x7c,0x82,0x82,0x82,0x7c,0x00,0x00, /* 56 */ +0x00,0x7c,0x82,0x82,0x82,0x82,0x7a,0x02,0x02,0xfc,0x00,0x00, /* 57 */ +0x00,0x00,0x10,0x10,0x00,0x00,0x00,0x10,0x10,0x00,0x00,0x00, /* 58 */ +0x00,0x00,0x10,0x10,0x00,0x00,0x00,0x10,0x10,0x60,0x00,0x00, /* 59 */ +0x00,0x08,0x08,0x10,0x20,0x40,0x20,0x10,0x08,0x08,0x00,0x00, /* 60 */ +0x00,0x00,0x00,0x00,0xfe,0x00,0xfe,0x00,0x00,0x00,0x00,0x00, /* 61 */ +0x00,0x10,0x10,0x08,0x04,0x02,0x04,0x08,0x10,0x10,0x00,0x00, /* 62 */ +0x00,0xfc,0x02,0x02,0x02,0x1c,0x20,0x20,0x00,0x20,0x00,0x00, /* 63 */ +0x00,0x7c,0x82,0x8a,0x92,0x92,0x92,0x8c,0x80,0x7c,0x00,0x00, /* 64 */ +0x00,0x7c,0x82,0x82,0x82,0x82,0xba,0x82,0x82,0x82,0x00,0x00, /* 65 */ +0x00,0xbc,0x82,0x82,0x82,0xbc,0x82,0x82,0x82,0xbc,0x00,0x00, /* 66 */ +0x00,0x7c,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x7c,0x00,0x00, /* 67 */ +0x00,0xbc,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0xbc,0x00,0x00, /* 68 */ +0x00,0x7c,0x80,0x80,0x80,0xb8,0x80,0x80,0x80,0x7c,0x00,0x00, /* 69 */ +0x00,0x7c,0x80,0x80,0x80,0xb8,0x80,0x80,0x80,0x80,0x00,0x00, /* 70 */ +0x00,0x7c,0x80,0x80,0x80,0x80,0x9a,0x82,0x82,0x7c,0x00,0x00, /* 71 */ +0x00,0x82,0x82,0x82,0x82,0xba,0x82,0x82,0x82,0x82,0x00,0x00, /* 72 */ +0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 73 */ +0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x84,0x78,0x00,0x00, /* 74 */ +0x00,0x82,0x82,0x82,0x82,0xbc,0x82,0x82,0x82,0x82,0x00,0x00, /* 75 */ +0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x7e,0x00,0x00, /* 76 */ +0x00,0x7c,0x82,0x92,0x92,0x92,0x92,0x82,0x82,0x82,0x00,0x00, /* 77 */ +0x00,0x7c,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x00,0x00, /* 78 */ +0x00,0x7c,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 79 */ +0x00,0xbc,0x82,0x82,0x82,0xbc,0x80,0x80,0x80,0x80,0x00,0x00, /* 80 */ +0x00,0x7c,0x82,0x82,0x82,0x82,0x8a,0x8a,0x82,0x7c,0x00,0x00, /* 81 */ +0x00,0xbc,0x82,0x82,0x82,0xbc,0x82,0x82,0x82,0x82,0x00,0x00, /* 82 */ +0x00,0x7e,0x80,0x80,0x80,0x7c,0x02,0x02,0x02,0xfc,0x00,0x00, /* 83 */ +0x00,0xfe,0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 84 */ +0x00,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 85 */ +0x00,0x82,0x82,0x82,0x82,0x82,0x84,0x88,0x90,0xa0,0x00,0x00, /* 86 */ +0x00,0x82,0x82,0x82,0x82,0x92,0x92,0x92,0x82,0x7c,0x00,0x00, /* 87 */ +0x00,0x82,0x82,0x82,0x82,0x7c,0x82,0x82,0x82,0x82,0x00,0x00, /* 88 */ +0x00,0x82,0x82,0x82,0x82,0x7c,0x00,0x10,0x10,0x10,0x00,0x00, /* 89 */ +0x00,0xfc,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x7e,0x00,0x00, /* 90 */ +0x00,0x1c,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x1c,0x00,0x00, /* 91 */ +0x00,0x80,0x80,0x80,0x40,0x20,0x10,0x08,0x04,0x02,0x00,0x00, /* 92 */ +0x00,0x38,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x38,0x00,0x00, /* 93 */ +0x00,0x38,0x44,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 94 */ +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x00, /* 95 */ +0x00,0x08,0x08,0x08,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 96 */ +0x00,0x00,0x00,0x00,0x3c,0x02,0x3a,0x42,0x42,0x3c,0x00,0x00, /* 97 */ +0x00,0x00,0x40,0x40,0x5c,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 98 */ +0x00,0x00,0x00,0x00,0x3c,0x40,0x40,0x40,0x40,0x3c,0x00,0x00, /* 99 */ +0x00,0x00,0x02,0x02,0x3a,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 100 */ +0x00,0x00,0x00,0x00,0x3c,0x42,0x42,0x5c,0x40,0x3c,0x00,0x00, /* 101 */ +0x00,0x00,0x0c,0x10,0x10,0x10,0x54,0x10,0x10,0x10,0x00,0x00, /* 102 */ +0x00,0x00,0x00,0x00,0x3c,0x42,0x42,0x42,0x42,0x3a,0x02,0x3c, /* 103 */ +0x00,0x00,0x40,0x40,0x5c,0x42,0x42,0x42,0x42,0x42,0x00,0x00, /* 104 */ +0x00,0x00,0x08,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00, /* 105 */ +0x00,0x00,0x08,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x30, /* 106 */ +0x00,0x00,0x40,0x40,0x42,0x42,0x5c,0x42,0x42,0x42,0x00,0x00, /* 107 */ +0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00, /* 108 */ +0x00,0x00,0x00,0x00,0x7c,0x82,0x92,0x92,0x92,0x92,0x00,0x00, /* 109 */ +0x00,0x00,0x00,0x00,0x3c,0x42,0x42,0x42,0x42,0x42,0x00,0x00, /* 110 */ +0x00,0x00,0x00,0x00,0x3c,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 111 */ +0x00,0x00,0x00,0x00,0x3c,0x42,0x42,0x42,0x42,0x5c,0x40,0x40, /* 112 */ +0x00,0x00,0x00,0x00,0x3c,0x42,0x42,0x42,0x42,0x3a,0x02,0x02, /* 113 */ +0x00,0x00,0x00,0x00,0x0c,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 114 */ +0x00,0x00,0x00,0x00,0x3e,0x40,0x3c,0x02,0x02,0x7c,0x00,0x00, /* 115 */ +0x00,0x00,0x10,0x10,0x10,0x54,0x10,0x10,0x10,0x0c,0x00,0x00, /* 116 */ +0x00,0x00,0x00,0x00,0x42,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 117 */ +0x00,0x00,0x00,0x00,0x42,0x42,0x42,0x44,0x48,0x50,0x00,0x00, /* 118 */ +0x00,0x00,0x00,0x00,0x92,0x92,0x92,0x92,0x82,0x7c,0x00,0x00, /* 119 */ +0x00,0x00,0x00,0x00,0x42,0x42,0x3c,0x42,0x42,0x42,0x00,0x00, /* 120 */ +0x00,0x00,0x00,0x00,0x42,0x42,0x42,0x42,0x42,0x3a,0x02,0x3c, /* 121 */ +0x00,0x00,0x00,0x00,0x7c,0x02,0x0c,0x30,0x40,0x3e,0x00,0x00, /* 122 */ +0x00,0x1c,0x20,0x20,0x20,0x40,0x20,0x20,0x20,0x1c,0x00,0x00, /* 123 */ +0x00,0x10,0x10,0x10,0x10,0x00,0x10,0x10,0x10,0x10,0x00,0x00, /* 124 */ +0x00,0x38,0x04,0x04,0x04,0x02,0x04,0x04,0x04,0x38,0x00,0x00, /* 125 */ +0x00,0x04,0x38,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 126 */ +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160 */ +0x00,0x10,0x10,0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 161 */ +0x00,0x00,0x08,0x3e,0x40,0x48,0x48,0x40,0x3e,0x08,0x00,0x00, /* 162 */ +0x00,0x1c,0x20,0x20,0x20,0xa8,0x20,0x20,0x42,0xbc,0x00,0x00, /* 163 */ +0x00,0x00,0x82,0x38,0x44,0x44,0x44,0x38,0x82,0x00,0x00,0x00, /* 164 */ +0x00,0x82,0x82,0x82,0x7c,0x00,0x54,0x10,0x54,0x10,0x00,0x00, /* 165 */ +0x00,0x10,0x10,0x10,0x00,0x00,0x00,0x10,0x10,0x10,0x00,0x00, /* 166 */ +0x00,0x38,0x40,0x38,0x44,0x44,0x44,0x44,0x38,0x04,0x38,0x00, /* 167 */ +0x6c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168 */ +0x00,0x7c,0x82,0x9a,0xa2,0xa2,0xa2,0x9a,0x82,0x7c,0x00,0x00, /* 169 */ +0x38,0x04,0x34,0x44,0x38,0x00,0x7c,0x00,0x00,0x00,0x00,0x00, /* 170 */ +0x00,0x00,0x00,0x24,0x48,0x00,0x48,0x24,0x00,0x00,0x00,0x00, /* 171 */ +0x00,0x00,0x00,0x00,0x00,0xfc,0x02,0x02,0x02,0x00,0x00,0x00, /* 172 */ +0x00,0x00,0x00,0x00,0x00,0x7c,0x00,0x00,0x00,0x00,0x00,0x00, /* 173 */ +0x00,0x7c,0x82,0x92,0xaa,0xb2,0xaa,0xaa,0x82,0x7c,0x00,0x00, /* 174 */ +0x7c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 175 */ +0x38,0x44,0x44,0x44,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176 */ +0x00,0x10,0x10,0xd6,0x10,0x10,0x00,0xfe,0x00,0x00,0x00,0x00, /* 177 */ +0x38,0x04,0x18,0x20,0x3c,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 178 */ +0x38,0x04,0x38,0x04,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 179 */ +0x18,0x20,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 180 */ +0x00,0x00,0x00,0x00,0x44,0x44,0x44,0x44,0x44,0x58,0x40,0x40, /* 181 */ +0x00,0x79,0xfa,0xfa,0xfa,0x7a,0x02,0x0a,0x0a,0x0a,0x0a,0x00, /* 182 */ +0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00, /* 183 */ +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x10,0x00, /* 184 */ +0x08,0x18,0x08,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 185 */ +0x38,0x44,0x44,0x38,0x00,0x7c,0x00,0x00,0x00,0x00,0x00,0x00, /* 186 */ +0x00,0x00,0x00,0x48,0x24,0x00,0x24,0x48,0x00,0x00,0x00,0x00, /* 187 */ +0x20,0xa2,0x22,0x22,0x24,0x08,0x10,0x29,0x49,0x85,0x01,0x01, /* 188 */ +0x20,0xa2,0x22,0x22,0x24,0x08,0x10,0x2e,0x41,0x86,0x08,0x0f, /* 189 */ +0xe0,0x12,0xe2,0x12,0xe4,0x08,0x10,0x29,0x49,0x85,0x01,0x01, /* 190 */ +0x00,0x08,0x00,0x08,0x08,0x70,0x80,0x80,0x80,0x7e,0x00,0x00, /* 191 */ +0x20,0x18,0x00,0x7c,0x82,0x82,0x82,0xba,0x82,0x82,0x00,0x00, /* 192 */ +0x08,0x30,0x00,0x7c,0x82,0x82,0x82,0xba,0x82,0x82,0x00,0x00, /* 193 */ +0x38,0x44,0x00,0x7c,0x82,0x82,0x82,0xba,0x82,0x82,0x00,0x00, /* 194 */ +0x32,0x4c,0x00,0x7c,0x82,0x82,0x82,0xba,0x82,0x82,0x00,0x00, /* 195 */ +0x6c,0x00,0x00,0x7c,0x82,0x82,0x82,0xba,0x82,0x82,0x00,0x00, /* 196 */ +0x38,0x44,0x38,0x7c,0x82,0x82,0x82,0xba,0x82,0x82,0x00,0x00, /* 197 */ +0x00,0x77,0x88,0x88,0x88,0x8b,0xa8,0x88,0x88,0x8b,0x00,0x00, /* 198 */ +0x00,0x7c,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x6c,0x10,0x20, /* 199 */ +0x20,0x18,0x00,0x7c,0x80,0x80,0xb8,0x80,0x80,0x7c,0x00,0x00, /* 200 */ +0x08,0x30,0x00,0x7c,0x80,0x80,0xb8,0x80,0x80,0x7c,0x00,0x00, /* 201 */ +0x38,0x44,0x00,0x7c,0x80,0x80,0xb8,0x80,0x80,0x7c,0x00,0x00, /* 202 */ +0x6c,0x00,0x00,0x7c,0x80,0x80,0xb8,0x80,0x80,0x7c,0x00,0x00, /* 203 */ +0x20,0x18,0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 204 */ +0x08,0x30,0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 205 */ +0x38,0x44,0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 206 */ +0x6c,0x00,0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 207 */ +0x00,0xbc,0x82,0x82,0x82,0xb2,0x82,0x82,0x82,0xbc,0x00,0x00, /* 208 */ +0x32,0x4c,0x00,0x7c,0x82,0x82,0x82,0x82,0x82,0x82,0x00,0x00, /* 209 */ +0x20,0x18,0x00,0x7c,0x82,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 210 */ +0x08,0x30,0x00,0x7c,0x82,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 211 */ +0x38,0x44,0x00,0x7c,0x82,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 212 */ +0x32,0x4c,0x00,0x7c,0x82,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 213 */ +0x6c,0x00,0x00,0x7c,0x82,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 214 */ +0x00,0x00,0x00,0x00,0x44,0x28,0x00,0x28,0x44,0x00,0x00,0x00, /* 215 */ +0x00,0x7a,0x84,0x82,0x8a,0x92,0xa2,0x82,0x42,0xbc,0x00,0x00, /* 216 */ +0x20,0x18,0x00,0x82,0x82,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 217 */ +0x08,0x30,0x00,0x82,0x82,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 218 */ +0x38,0x44,0x00,0x82,0x82,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 219 */ +0x6c,0x00,0x00,0x82,0x82,0x82,0x82,0x82,0x82,0x7c,0x00,0x00, /* 220 */ +0x08,0xb2,0x82,0x82,0x82,0x7c,0x00,0x10,0x10,0x10,0x00,0x00, /* 221 */ +0x00,0x80,0x80,0xbc,0x82,0x82,0x82,0xbc,0x80,0x80,0x00,0x00, /* 222 */ +0x00,0x3c,0x42,0x42,0x42,0x5c,0x42,0x42,0x42,0x9c,0x00,0x00, /* 223 */ +0x20,0x18,0x00,0x00,0x3c,0x02,0x3a,0x42,0x42,0x3c,0x00,0x00, /* 224 */ +0x08,0x30,0x00,0x00,0x3c,0x02,0x3a,0x42,0x42,0x3c,0x00,0x00, /* 225 */ +0x38,0x44,0x00,0x00,0x3c,0x02,0x3a,0x42,0x42,0x3c,0x00,0x00, /* 226 */ +0x32,0x4c,0x00,0x00,0x3c,0x02,0x3a,0x42,0x42,0x3c,0x00,0x00, /* 227 */ +0x6c,0x00,0x00,0x00,0x3c,0x02,0x3a,0x42,0x42,0x3c,0x00,0x00, /* 228 */ +0x18,0x24,0x18,0x00,0x3c,0x02,0x3a,0x42,0x42,0x3c,0x00,0x00, /* 229 */ +0x00,0x00,0x00,0x00,0x6c,0x12,0x52,0x94,0x90,0x6e,0x00,0x00, /* 230 */ +0x00,0x00,0x00,0x00,0x3c,0x40,0x40,0x40,0x40,0x34,0x08,0x10, /* 231 */ +0x20,0x18,0x00,0x00,0x3c,0x42,0x42,0x5c,0x40,0x3c,0x00,0x00, /* 232 */ +0x08,0x30,0x00,0x00,0x3c,0x42,0x42,0x5c,0x40,0x3c,0x00,0x00, /* 233 */ +0x38,0x44,0x00,0x00,0x3c,0x42,0x42,0x5c,0x40,0x3c,0x00,0x00, /* 234 */ +0x6c,0x00,0x00,0x00,0x3c,0x42,0x42,0x5c,0x40,0x3c,0x00,0x00, /* 235 */ +0x20,0x18,0x00,0x10,0x00,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 236 */ +0x08,0x30,0x00,0x10,0x00,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 237 */ +0x38,0x44,0x00,0x10,0x00,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 238 */ +0x6c,0x00,0x00,0x10,0x00,0x10,0x10,0x10,0x10,0x10,0x00,0x00, /* 239 */ +0x00,0x14,0x08,0x14,0x02,0x3a,0x42,0x42,0x42,0x3c,0x00,0x00, /* 240 */ +0x00,0x32,0x4c,0x00,0x3c,0x42,0x42,0x42,0x42,0x42,0x00,0x00, /* 241 */ +0x20,0x18,0x00,0x00,0x3c,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 242 */ +0x08,0x30,0x00,0x00,0x3c,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 243 */ +0x38,0x44,0x00,0x00,0x3c,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 244 */ +0x32,0x4c,0x00,0x00,0x3c,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 245 */ +0x6c,0x00,0x00,0x00,0x3c,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 246 */ +0x00,0x00,0x00,0x00,0x38,0x00,0xfe,0x00,0x38,0x00,0x00,0x00, /* 247 */ +0x00,0x00,0x00,0x00,0x3a,0x44,0x4a,0x52,0x22,0x5c,0x00,0x00, /* 248 */ +0x20,0x18,0x00,0x00,0x42,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 249 */ +0x08,0x30,0x00,0x00,0x42,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 250 */ +0x38,0x44,0x00,0x00,0x42,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 251 */ +0x6c,0x00,0x00,0x00,0x42,0x42,0x42,0x42,0x42,0x3c,0x00,0x00, /* 252 */ +0x04,0x18,0x00,0x00,0x42,0x42,0x42,0x42,0x42,0x3a,0x02,0x3c, /* 253 */ +0x00,0x80,0x80,0x9c,0xa2,0x82,0xa2,0x9c,0x80,0x80,0x00,0x00, /* 254 */ +}; +static int radonFontMetaData[256*5]={ +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,8,12,0,-2,12,8,12,0,-2,24,8,12,0,-2,36,8,12,0,-2,48,8,12,0,-2,60,8,12,0,-2,72,8,12,0,-2,84,8,12,0,-2,96,8,12,0,-2,108,8,12,0,-2,120,8,12,0,-2,132,8,12,0,-2,144,8,12,0,-2,156,8,12,0,-2,168,8,12,0,-2,180,8,12,0,-2,192,8,12,0,-2,204,8,12,0,-2,216,8,12,0,-2,228,8,12,0,-2,240,8,12,0,-2,252,8,12,0,-2,264,8,12,0,-2,276,8,12,0,-2,288,8,12,0,-2,300,8,12,0,-2,312,8,12,0,-2,324,8,12,0,-2,336,8,12,0,-2,348,8,12,0,-2,360,8,12,0,-2,372,8,12,0,-2,384,8,12,0,-2,396,8,12,0,-2,408,8,12,0,-2,420,8,12,0,-2,432,8,12,0,-2,444,8,12,0,-2,456,8,12,0,-2,468,8,12,0,-2,480,8,12,0,-2,492,8,12,0,-2,504,8,12,0,-2,516,8,12,0,-2,528,8,12,0,-2,540,8,12,0,-2,552,8,12,0,-2,564,8,12,0,-2,576,8,12,0,-2,588,8,12,0,-2,600,8,12,0,-2,612,8,12,0,-2,624,8,12,0,-2,636,8,12,0,-2,648,8,12,0,-2,660,8,12,0,-2,672,8,12,0,-2,684,8,12,0,-2,696,8,12,0,-2,708,8,12,0,-2,720,8,12,0,-2,732,8,12,0,-2,744,8,12,0,-2,756,8,12,0,-2,768,8,12,0,-2,780,8,12,0,-2,792,8,12,0,-2,804,8,12,0,-2,816,8,12,0,-2,828,8,12,0,-2,840,8,12,0,-2,852,8,12,0,-2,864,8,12,0,-2,876,8,12,0,-2,888,8,12,0,-2,900,8,12,0,-2,912,8,12,0,-2,924,8,12,0,-2,936,8,12,0,-2,948,8,12,0,-2,960,8,12,0,-2,972,8,12,0,-2,984,8,12,0,-2,996,8,12,0,-2,1008,8,12,0,-2,1020,8,12,0,-2,1032,8,12,0,-2,1044,8,12,0,-2,1056,8,12,0,-2,1068,8,12,0,-2,1080,8,12,0,-2,1092,8,12,0,-2,1104,8,12,0,-2,1116,8,12,0,-2,1128,8,12,0,-2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1140,8,12,0,-2,1152,8,12,0,-2,1164,8,12,0,-2,1176,8,12,0,-2,1188,8,12,0,-2,1200,8,12,0,-2,1212,8,12,0,-2,1224,8,12,0,-2,1236,8,12,0,-2,1248,8,12,0,-2,1260,8,12,0,-2,1272,8,12,0,-2,1284,8,12,0,-2,1296,8,12,0,-2,1308,8,12,0,-2,1320,8,12,0,-2,1332,8,12,0,-2,1344,8,12,0,-2,1356,8,12,0,-2,1368,8,12,0,-2,1380,8,12,0,-2,1392,8,12,0,-2,1404,8,12,0,-2,1416,8,12,0,-2,1428,8,12,0,-2,1440,8,12,0,-2,1452,8,12,0,-2,1464,8,12,0,-2,1476,8,12,0,-2,1488,8,12,0,-2,1500,8,12,0,-2,1512,8,12,0,-2,1524,8,12,0,-2,1536,8,12,0,-2,1548,8,12,0,-2,1560,8,12,0,-2,1572,8,12,0,-2,1584,8,12,0,-2,1596,8,12,0,-2,1608,8,12,0,-2,1620,8,12,0,-2,1632,8,12,0,-2,1644,8,12,0,-2,1656,8,12,0,-2,1668,8,12,0,-2,1680,8,12,0,-2,1692,8,12,0,-2,1704,8,12,0,-2,1716,8,12,0,-2,1728,8,12,0,-2,1740,8,12,0,-2,1752,8,12,0,-2,1764,8,12,0,-2,1776,8,12,0,-2,1788,8,12,0,-2,1800,8,12,0,-2,1812,8,12,0,-2,1824,8,12,0,-2,1836,8,12,0,-2,1848,8,12,0,-2,1860,8,12,0,-2,1872,8,12,0,-2,1884,8,12,0,-2,1896,8,12,0,-2,1908,8,12,0,-2,1920,8,12,0,-2,1932,8,12,0,-2,1944,8,12,0,-2,1956,8,12,0,-2,1968,8,12,0,-2,1980,8,12,0,-2,1992,8,12,0,-2,2004,8,12,0,-2,2016,8,12,0,-2,2028,8,12,0,-2,2040,8,12,0,-2,2052,8,12,0,-2,2064,8,12,0,-2,2076,8,12,0,-2,2088,8,12,0,-2,2100,8,12,0,-2,2112,8,12,0,-2,2124,8,12,0,-2,2136,8,12,0,-2,2148,8,12,0,-2,2160,8,12,0,-2,2172,8,12,0,-2,2184,8,12,0,-2,2196,8,12,0,-2,2208,8,12,0,-2,2220,8,12,0,-2,2232,8,12,0,-2,2244,8,12,0,-2,2256,8,12,0,-2,2268,8,12,0,-2,0,0,0,0,0,}; +static rfbFontData radonFont={radonFontData, radonFontMetaData}; diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/regiontest.c b/jni/vnc/LibVNCServer-0.9.9/examples/regiontest.c new file mode 100644 index 0000000..91f1a17 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/regiontest.c @@ -0,0 +1,3 @@ +#define SRA_TEST +#include "../libvncserver/rfbregion.c" + diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/rotate.c b/jni/vnc/LibVNCServer-0.9.9/examples/rotate.c new file mode 100644 index 0000000..028de8c --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/rotate.c @@ -0,0 +1,85 @@ +#include +#include +#include + +#define CONCAT2(a,b) a##b +#define CONCAT2E(a,b) CONCAT2(a,b) +#define CONCAT3(a,b,c) a##b##c +#define CONCAT3E(a,b,c) CONCAT3(a,b,c) + +#define FUNCNAME rfbRotate +#define FUNC(i, j) (h - 1 - j + i * h) +#define SWAPDIMENSIONS +#define OUTBITS 8 +#include "rotatetemplate.c" +#define OUTBITS 16 +#include "rotatetemplate.c" +#define OUTBITS 32 +#include "rotatetemplate.c" +#undef FUNCNAME +#undef FUNC + +#define FUNCNAME rfbRotateCounterClockwise +#define FUNC(i, j) (j + (w - 1 - i) * h) +#define OUTBITS 8 +#include "rotatetemplate.c" +#define OUTBITS 16 +#include "rotatetemplate.c" +#define OUTBITS 32 +#include "rotatetemplate.c" +#undef FUNCNAME +#undef FUNC +#undef SWAPDIMENSIONS + +#define FUNCNAME rfbFlipHorizontally +#define FUNC(i, j) ((w - 1 - i) + j * w) +#define OUTBITS 8 +#include "rotatetemplate.c" +#define OUTBITS 16 +#include "rotatetemplate.c" +#define OUTBITS 32 +#include "rotatetemplate.c" +#undef FUNCNAME +#undef FUNC + +#define FUNCNAME rfbFlipVertically +#define FUNC(i, j) (i + (h - 1 - j) * w) +#define OUTBITS 8 +#include "rotatetemplate.c" +#define OUTBITS 16 +#include "rotatetemplate.c" +#define OUTBITS 32 +#include "rotatetemplate.c" +#undef FUNCNAME +#undef FUNC + +#define FUNCNAME rfbRotateHundredAndEighty +#define FUNC(i, j) ((w - 1 - i) + (h - 1 - j) * w) +#define OUTBITS 8 +#include "rotatetemplate.c" +#define OUTBITS 16 +#include "rotatetemplate.c" +#define OUTBITS 32 +#include "rotatetemplate.c" +#undef FUNCNAME +#undef FUNC + +static void HandleKey(rfbBool down,rfbKeySym key,rfbClientPtr cl) +{ + if(down) { + if (key==XK_Escape || key=='q' || key=='Q') + rfbCloseClient(cl); + else if (key == 'r') + rfbRotate(cl->screen); + else if (key == 'R') + rfbRotateCounterClockwise(cl->screen); + else if (key == 'f') + rfbFlipHorizontally(cl->screen); + else if (key == 'F') + rfbFlipVertically(cl->screen); + } +} + +#define HAVE_HANDLEKEY +#include "pnmshow.c" + diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/rotatetemplate.c b/jni/vnc/LibVNCServer-0.9.9/examples/rotatetemplate.c new file mode 100644 index 0000000..0d7e007 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/rotatetemplate.c @@ -0,0 +1,52 @@ +#define OUT_T CONCAT3E(uint,OUTBITS,_t) +#define FUNCTION CONCAT2E(FUNCNAME,OUTBITS) + +static void FUNCTION(rfbScreenInfoPtr screen) +{ + OUT_T* buffer = (OUT_T*)screen->frameBuffer; + int i, j, w = screen->width, h = screen->height; + OUT_T* newBuffer = (OUT_T*)malloc(w * h * sizeof(OUT_T)); + + for (j = 0; j < h; j++) + for (i = 0; i < w; i++) + newBuffer[FUNC(i, j)] = buffer[i + j * w]; + + memcpy(buffer, newBuffer, w * h * sizeof(OUT_T)); + free(newBuffer); + +#ifdef SWAPDIMENSIONS + screen->width = h; + screen->paddedWidthInBytes = h * OUTBITS / 8; + screen->height = w; + + { + rfbClientIteratorPtr iterator; + rfbClientPtr cl; + iterator = rfbGetClientIterator(screen); + while ((cl = rfbClientIteratorNext(iterator)) != NULL) + cl->newFBSizePending = 1; + } +#endif + + rfbMarkRectAsModified(screen, 0, 0, screen->width, screen->height); +} + +#if OUTBITS == 32 +void FUNCNAME(rfbScreenInfoPtr screen) { + if (screen->serverFormat.bitsPerPixel == 32) + CONCAT2E(FUNCNAME,32)(screen); + else if (screen->serverFormat.bitsPerPixel == 16) + CONCAT2E(FUNCNAME,16)(screen); + else if (screen->serverFormat.bitsPerPixel == 8) + CONCAT2E(FUNCNAME,8)(screen); + else { + rfbErr("Unsupported pixel depth: %d\n", + screen->serverFormat.bitsPerPixel); + return; + } +} +#endif + +#undef FUNCTION +#undef OUTBITS + diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/simple.c b/jni/vnc/LibVNCServer-0.9.9/examples/simple.c new file mode 100644 index 0000000..6167d72 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/simple.c @@ -0,0 +1,12 @@ +#include + +int main(int argc,char** argv) +{ + rfbScreenInfoPtr server=rfbGetScreen(&argc,argv,400,300,8,3,4); + if(!server) + return 0; + server->frameBuffer=(char*)malloc(400*300*4); + rfbInitServer(server); + rfbRunEventLoop(server,-1,FALSE); + return(0); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/simple15.c b/jni/vnc/LibVNCServer-0.9.9/examples/simple15.c new file mode 100644 index 0000000..a90988e --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/simple15.c @@ -0,0 +1,25 @@ +/* This example shows how to use 15-bit (which is handled as 16-bit + internally). */ + +#include + +int main(int argc,char** argv) +{ + int i,j; + uint16_t* f; + + rfbScreenInfoPtr server=rfbGetScreen(&argc,argv,400,300,5,3,2); + if(!server) + return 0; + server->frameBuffer=(char*)malloc(400*300*2); + f=(uint16_t*)server->frameBuffer; + for(j=0;j<300;j++) + for(i=0;i<400;i++) + f[j*400+i]=/* red */ ((j*32/300) << 10) | + /* green */ (((j+400-i)*32/700) << 5) | + /* blue */ ((i*32/400)); + + rfbInitServer(server); + rfbRunEventLoop(server,-1,FALSE); + return(0); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/storepasswd.c b/jni/vnc/LibVNCServer-0.9.9/examples/storepasswd.c new file mode 100644 index 0000000..7c358d9 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/storepasswd.c @@ -0,0 +1,46 @@ +/* + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include + +static void usage(void) +{ + printf("\nusage: storepasswd \n\n"); + + printf("Stores a password in encrypted format.\n"); + printf("The resulting file can be used with the -rfbauth argument to OSXvnc.\n\n"); + exit(1); +} + +int main(int argc, char *argv[]) +{ + if (argc != 3) + usage(); + + if (rfbEncryptAndStorePasswd(argv[1], argv[2]) != 0) { + printf("storing password failed.\n"); + return 1; + } else { + printf("storing password succeeded.\n"); + return 0; + } +} diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/vncev.c b/jni/vnc/LibVNCServer-0.9.9/examples/vncev.c new file mode 100644 index 0000000..b185746 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/vncev.c @@ -0,0 +1,134 @@ +/** + * @example vncev.c + * This program is a simple server to show events coming from the client +*/ +#ifdef __STRICT_ANSI__ +#define _BSD_SOURCE +#endif +#include +#include +#include +#ifndef __MINGW32__ +#include +#endif +#include +#include + +#define width 100 +#define height 100 +static char f[width*height]; +static char* keys[0x400]; + +static int hex2number(unsigned char c) +{ + if(c>'f') return(-1); + else if(c>'F') + return(10+c-'a'); + else if(c>'9') + return(10+c-'A'); + else + return(c-'0'); +} + +static void read_keys(void) +{ + int i,j,k; + char buffer[1024]; + FILE* keysyms=fopen("keysym.h","r"); + + memset(keys,0,0x400*sizeof(char*)); + + if(!keysyms) + return; + + while(!feof(keysyms)) { + fgets(buffer,1024,keysyms); + if(!strncmp(buffer,"#define XK_",strlen("#define XK_"))) { + for(i=strlen("#define XK_");buffer[i] && buffer[i]!=' ' + && buffer[i]!='\t';i++); + if(buffer[i]==0) /* don't support wrapped lines */ + continue; + buffer[i]=0; + for(i++;buffer[i] && buffer[i]!='0';i++); + if(buffer[i]==0 || buffer[i+1]!='x') continue; + for(j=0,i+=2;(k=hex2number(buffer[i]))>=0;i++) + j=j*16+k; + if(keys[j&0x3ff]) { + char* x=(char*)malloc(1+strlen(keys[j&0x3ff])+1+strlen(buffer+strlen("#define "))); + strcpy(x,keys[j&0x3ff]); + strcat(x,","); + strcat(x,buffer+strlen("#define ")); + free(keys[j&0x3ff]); + keys[j&0x3ff]=x; + } else + keys[j&0x3ff] = strdup(buffer+strlen("#define ")); + } + + } + fclose(keysyms); +} + +static int lineHeight=16,lineY=height-16; +static void output(rfbScreenInfoPtr s,char* line) +{ + rfbDoCopyRect(s,0,0,width,height-lineHeight,0,-lineHeight); + rfbDrawString(s,&default8x16Font,10,lineY,line,0x01); + rfbLog("%s\n",line); +} + +static void dokey(rfbBool down,rfbKeySym k,rfbClientPtr cl) +{ + char buffer[1024+32]; + + sprintf(buffer,"%s: %s (0x%x)", + down?"down":"up",keys[k&0x3ff]?keys[k&0x3ff]:"",(unsigned int)k); + output(cl->screen,buffer); +} + +static void doptr(int buttonMask,int x,int y,rfbClientPtr cl) +{ + char buffer[1024]; + if(buttonMask) { + sprintf(buffer,"Ptr: mouse button mask 0x%x at %d,%d",buttonMask,x,y); + output(cl->screen,buffer); + } + +} + +static enum rfbNewClientAction newclient(rfbClientPtr cl) +{ + char buffer[1024]; + struct sockaddr_in addr; + socklen_t len=sizeof(addr); + unsigned int ip; + + getpeername(cl->sock,(struct sockaddr*)&addr,&len); + ip=ntohl(addr.sin_addr.s_addr); + sprintf(buffer,"Client connected from ip %d.%d.%d.%d", + (ip>>24)&0xff,(ip>>16)&0xff,(ip>>8)&0xff,ip&0xff); + output(cl->screen,buffer); + return RFB_CLIENT_ACCEPT; +} + +int main(int argc,char** argv) +{ + rfbScreenInfoPtr s=rfbGetScreen(&argc,argv,width,height,8,1,1); + if(!s) + return 0; + s->colourMap.is16=FALSE; + s->colourMap.count=2; + s->colourMap.data.bytes=(unsigned char*)"\xd0\xd0\xd0\x30\x01\xe0"; + s->serverFormat.trueColour=FALSE; + s->frameBuffer=f; + s->kbdAddEvent=dokey; + s->ptrAddEvent=doptr; + s->newClientHook=newclient; + + memset(f,0,width*height); + read_keys(); + rfbInitServer(s); + + while(1) { + rfbProcessEvents(s,999999); + } +} diff --git a/jni/vnc/LibVNCServer-0.9.9/examples/zippy.c b/jni/vnc/LibVNCServer-0.9.9/examples/zippy.c new file mode 100644 index 0000000..5a5961a --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/examples/zippy.c @@ -0,0 +1,183 @@ +#include +#include +#include +#include +#include + +static int maxx=400, maxy=400, bpp=4; +/* odd maxx doesn't work (vncviewer bug) */ + +/* Here we create a structure so that every client has it's own pointer */ + +/* turns the framebuffer black */ +void blank_framebuffer(char* frame_buffer, int x1, int y1, int x2, int y2); +/* displays a red bar, a green bar, and a blue bar */ +void draw_primary_colors (char* frame_buffer, int x1, int y1, int x2, int y2); +void draw_primary_colours_generic(rfbScreenInfoPtr s,int x1,int y1,int x2,int y2); +void draw_primary_colours_generic_fast(rfbScreenInfoPtr s,int x1,int y1,int x2,int y2); +void linecount (char* frame_buffer); +/* handles mouse events */ +void on_mouse_event (int buttonMask,int x,int y,rfbClientPtr cl); +/* handles keyboard events */ +void on_key_press (rfbBool down,rfbKeySym key,rfbClientPtr cl); + +int main (int argc, char **argv) +{ + rfbScreenInfoPtr server; + + if(!rfbProcessSizeArguments(&maxx,&maxy,&bpp,&argc,argv)) + return 1; + + server = rfbGetScreen (&argc, argv, maxx, maxy, 8, 3, bpp); + if(!server) + return 0; + server->desktopName = "Zippy das wundersquirrel\'s VNC server"; + server->frameBuffer = (char*)malloc(maxx*maxy*bpp); + server->alwaysShared = TRUE; + server->kbdAddEvent = on_key_press; + server->ptrAddEvent = on_mouse_event; + + rfbInitServer (server); + + blank_framebuffer(server->frameBuffer, 0, 0, maxx, maxy); + rfbRunEventLoop (server, -1, FALSE); + free(server->frameBuffer); + rfbScreenCleanup (server); + return 0; +} + +void blank_framebuffer(char* frame_buffer, int x1, int y1, int x2, int y2) +{ + int i; + for (i=0; i < maxx * maxy * bpp; i++) frame_buffer[i]=(char) 0; +} + +void draw_primary_colors (char* frame_buffer, int x1, int y1, int x2, int y2) +{ + int i, j, current_pixel; + for (i=y1; i < y2; i++){ + for (j=x1; j < x2; j++) { + current_pixel = (i*x2 + j) * bpp; + if (i < y2 ) { + frame_buffer[current_pixel+0] = (char) 128; + frame_buffer[current_pixel+1] = (char) 0; + frame_buffer[current_pixel+2] = (char) 0; + } + if (i < y2/3*2) { + frame_buffer[current_pixel+0] = (char) 0; + frame_buffer[current_pixel+1] = (char) 128; + frame_buffer[current_pixel+2] = (char) 0; + } + if (i < y2/3) { + frame_buffer[current_pixel+0] = (char) 0; + frame_buffer[current_pixel+1] = (char) 0; + frame_buffer[current_pixel+2] = (char) 128; + } + } + } + } + +/* Dscho's versions (slower, but works for bpp != 3 or 4) */ +void draw_primary_colours_generic(rfbScreenInfoPtr s,int x1,int y1,int x2,int y2) +{ + rfbPixelFormat f=s->serverFormat; + int i,j; + for(j=y1;jserverFormat; + int i,j,y3=(y1*2+y2)/3,y4=(y1+y2*2)/3; + /* draw first pixel */ + rfbDrawPixel(s,x1,y1,f.redMax<frameBuffer+(x)*bpp+(y)*s->paddedWidthInBytes + memcpy(ADDR(i,j+y1),ADDR(x1,y1),bpp); + memcpy(ADDR(i,j+y3),ADDR(x1,y3),bpp); + memcpy(ADDR(i,j+y4),ADDR(x1,y4),bpp); + } +} + +static void draw_primary_colours_generic_ultrafast(rfbScreenInfoPtr s,int x1,int y1,int x2,int y2) +{ + rfbPixelFormat f=s->serverFormat; + int y3=(y1*2+y2)/3,y4=(y1+y2*2)/3; + /* fill rectangles */ + rfbFillRect(s,x1,y1,x2,y3,f.redMax<maxy-20; i-=4) + for (j=0; j<4; j++) for (k=0; k < maxx; k++) { + current_pixel = (i*j*maxx + k) * bpp; + if (i%2 == 0) { + frame_buffer[current_pixel+0] = (char) 0; + frame_buffer[current_pixel+1] = (char) 0; + frame_buffer[current_pixel+2] = (char) 128; + } + + if (i%2 == 1) { + frame_buffer[current_pixel+0] = (char) 128; + frame_buffer[current_pixel+1] = (char) 0; + frame_buffer[current_pixel+2] = (char) 0; + } + } + +} + + +void on_key_press (rfbBool down,rfbKeySym key,rfbClientPtr cl) +{ + if (down) /* or else the action occurs on both the press and depress */ + switch (key) { + + case XK_b: + case XK_B: + blank_framebuffer(cl->screen->frameBuffer, 0, 0, maxx, maxy); + rfbDrawString(cl->screen,&default8x16Font,20,maxy-20,"Hello, World!",0xffffff); + rfbMarkRectAsModified(cl->screen,0, 0,maxx,maxy); + rfbLog("Framebuffer blanked\n"); + break; + case XK_p: + case XK_P: + /* draw_primary_colors (cl->screen->frameBuffer, 0, 0, maxx, maxy); */ + draw_primary_colours_generic_ultrafast (cl->screen, 0, 0, maxx, maxy); + rfbMarkRectAsModified(cl->screen,0, 0,maxx,maxy); + rfbLog("Primary colors displayed\n"); + break; + case XK_Q: + case XK_q: + rfbLog("Exiting now\n"); + exit(0); + case XK_C: + case XK_c: + rfbDrawString(cl->screen,&default8x16Font,20,100,"Hello, World!",0xffffff); + rfbMarkRectAsModified(cl->screen,0, 0,maxx,maxy); + break; + default: + rfbLog("The %c key was pressed\n", (char) key); + } +} + + +void on_mouse_event (int buttonMask,int x,int y,rfbClientPtr cl) +{ + printf("buttonMask: %i\n" + "x: %i\n" "y: %i\n", buttonMask, x, y); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/install-sh b/jni/vnc/LibVNCServer-0.9.9/install-sh new file mode 100755 index 0000000..6781b98 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/install-sh @@ -0,0 +1,520 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2009-04-28.21; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dst_arg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient.pc.in b/jni/vnc/LibVNCServer-0.9.9/libvncclient.pc.in new file mode 100644 index 0000000..143dc46 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient.pc.in @@ -0,0 +1,12 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: LibVNCClient +Description: A library for easy implementation of a VNC client. +Version: @VERSION@ +Requires: +Libs: -L${libdir} -lvncclient @LIBS@ @WSOCKLIB@ +Cflags: -I${includedir} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/Makefile.am b/jni/vnc/LibVNCServer-0.9.9/libvncclient/Makefile.am new file mode 100644 index 0000000..bf05a39 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/Makefile.am @@ -0,0 +1,29 @@ +INCLUDES = -I$(top_srcdir) -I$(top_srcdir)/common + +if HAVE_GNUTLS +TLSSRCS = tls_gnutls.c +TLSLIBS = @GNUTLS_LIBS@ +else +if HAVE_LIBSSL +TLSSRCS = tls_openssl.c +TLSLIBS = @SSL_LIBS@ @CRYPT_LIBS@ +else +TLSSRCS = tls_none.c +endif +endif + + +libvncclient_la_SOURCES=cursor.c listen.c rfbproto.c sockets.c vncviewer.c ../common/minilzo.c $(TLSSRCS) +libvncclient_la_LIBADD=$(TLSLIBS) + +noinst_HEADERS=../common/lzodefs.h ../common/lzoconf.h ../common/minilzo.h tls.h + +rfbproto.o: rfbproto.c corre.c hextile.c rre.c tight.c zlib.c zrle.c ultra.c + +EXTRA_DIST=corre.c hextile.c rre.c tight.c zlib.c zrle.c ultra.c tls_gnutls.c tls_openssl.c tls_none.c + +$(libvncclient_la_OBJECTS): ../rfb/rfbclient.h + +lib_LTLIBRARIES=libvncclient.la + + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/Makefile.in b/jni/vnc/LibVNCServer-0.9.9/libvncclient/Makefile.in new file mode 100644 index 0000000..75f7dd6 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/Makefile.in @@ -0,0 +1,598 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = libvncclient +DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/rfbconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(libdir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +am__DEPENDENCIES_1 = +libvncclient_la_DEPENDENCIES = $(am__DEPENDENCIES_1) +am__libvncclient_la_SOURCES_DIST = cursor.c listen.c rfbproto.c \ + sockets.c vncviewer.c ../common/minilzo.c tls_none.c \ + tls_openssl.c tls_gnutls.c +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_FALSE@am__objects_1 = tls_none.lo +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_TRUE@am__objects_1 = tls_openssl.lo +@HAVE_GNUTLS_TRUE@am__objects_1 = tls_gnutls.lo +am_libvncclient_la_OBJECTS = cursor.lo listen.lo rfbproto.lo \ + sockets.lo vncviewer.lo minilzo.lo $(am__objects_1) +libvncclient_la_OBJECTS = $(am_libvncclient_la_OBJECTS) +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = $(libvncclient_la_SOURCES) +DIST_SOURCES = $(am__libvncclient_la_SOURCES_DIST) +HEADERS = $(noinst_HEADERS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AVAHI_CFLAGS = @AVAHI_CFLAGS@ +AVAHI_LIBS = @AVAHI_LIBS@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CRYPT_LIBS = @CRYPT_LIBS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LDFLAGS = @JPEG_LDFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +RPMSOURCEDIR = @RPMSOURCEDIR@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSL_LIBS = @SSL_LIBS@ +STRIP = @STRIP@ +SYSTEM_LIBVNCSERVER_CFLAGS = @SYSTEM_LIBVNCSERVER_CFLAGS@ +SYSTEM_LIBVNCSERVER_LIBS = @SYSTEM_LIBVNCSERVER_LIBS@ +VERSION = @VERSION@ +WSOCKLIB = @WSOCKLIB@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_ffmpeg = @with_ffmpeg@ +INCLUDES = -I$(top_srcdir) -I$(top_srcdir)/common +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_FALSE@TLSSRCS = tls_none.c +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_TRUE@TLSSRCS = tls_openssl.c +@HAVE_GNUTLS_TRUE@TLSSRCS = tls_gnutls.c +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_TRUE@TLSLIBS = @SSL_LIBS@ @CRYPT_LIBS@ +@HAVE_GNUTLS_TRUE@TLSLIBS = @GNUTLS_LIBS@ +libvncclient_la_SOURCES = cursor.c listen.c rfbproto.c sockets.c vncviewer.c ../common/minilzo.c $(TLSSRCS) +libvncclient_la_LIBADD = $(TLSLIBS) +noinst_HEADERS = ../common/lzodefs.h ../common/lzoconf.h ../common/minilzo.h tls.h +EXTRA_DIST = corre.c hextile.c rre.c tight.c zlib.c zrle.c ultra.c tls_gnutls.c tls_openssl.c tls_none.c +lib_LTLIBRARIES = libvncclient.la +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu libvncclient/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu libvncclient/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done +libvncclient.la: $(libvncclient_la_OBJECTS) $(libvncclient_la_DEPENDENCIES) + $(AM_V_CCLD)$(LINK) -rpath $(libdir) $(libvncclient_la_OBJECTS) $(libvncclient_la_LIBADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cursor.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/listen.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minilzo.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfbproto.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sockets.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tls_gnutls.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tls_none.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tls_openssl.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vncviewer.Plo@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +minilzo.lo: ../common/minilzo.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT minilzo.lo -MD -MP -MF $(DEPDIR)/minilzo.Tpo -c -o minilzo.lo `test -f '../common/minilzo.c' || echo '$(srcdir)/'`../common/minilzo.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/minilzo.Tpo $(DEPDIR)/minilzo.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../common/minilzo.c' object='minilzo.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o minilzo.lo `test -f '../common/minilzo.c' || echo '$(srcdir)/'`../common/minilzo.c + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(LTLIBRARIES) $(HEADERS) +installdirs: + for dir in "$(DESTDIR)$(libdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-libLTLIBRARIES + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libLTLIBRARIES clean-libtool ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am \ + install-libLTLIBRARIES install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-libLTLIBRARIES + + +rfbproto.o: rfbproto.c corre.c hextile.c rre.c tight.c zlib.c zrle.c ultra.c + +$(libvncclient_la_OBJECTS): ../rfb/rfbclient.h + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/corre.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/corre.c new file mode 100644 index 0000000..baf91cc --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/corre.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * corre.c - handle CoRRE encoding. + * + * This file shouldn't be compiled directly. It is included multiple times by + * rfbproto.c, each time with a different definition of the macro BPP. For + * each value of BPP, this file defines a function which handles a CoRRE + * encoded rectangle with BPP bits per pixel. + */ + +#define HandleCoRREBPP CONCAT2E(HandleCoRRE,BPP) +#define CARDBPP CONCAT3E(uint,BPP,_t) + +static rfbBool +HandleCoRREBPP (rfbClient* client, int rx, int ry, int rw, int rh) +{ + rfbRREHeader hdr; + int i; + CARDBPP pix; + uint8_t *ptr; + int x, y, w, h; + + if (!ReadFromRFBServer(client, (char *)&hdr, sz_rfbRREHeader)) + return FALSE; + + hdr.nSubrects = rfbClientSwap32IfLE(hdr.nSubrects); + + if (!ReadFromRFBServer(client, (char *)&pix, sizeof(pix))) + return FALSE; + + FillRectangle(client, rx, ry, rw, rh, pix); + + if (!ReadFromRFBServer(client, client->buffer, hdr.nSubrects * (4 + (BPP / 8)))) + return FALSE; + + ptr = (uint8_t *)client->buffer; + + for (i = 0; i < hdr.nSubrects; i++) { + pix = *(CARDBPP *)ptr; + ptr += BPP/8; + x = *ptr++; + y = *ptr++; + w = *ptr++; + h = *ptr++; + + FillRectangle(client, rx+x, ry+y, w, h, pix); + } + + return TRUE; +} + +#undef CARDBPP diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/cursor.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/cursor.c new file mode 100644 index 0000000..a48d7c5 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/cursor.c @@ -0,0 +1,179 @@ +/* + * Copyright (C) 2001,2002 Constantin Kaplinsky. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * cursor.c - code to support cursor shape updates (XCursor and + * RichCursor preudo-encodings). + */ + +#include + + +#define OPER_SAVE 0 +#define OPER_RESTORE 1 + +#define RGB24_TO_PIXEL(bpp,r,g,b) \ + ((((uint##bpp##_t)(r) & 0xFF) * client->format.redMax + 127) / 255 \ + << client->format.redShift | \ + (((uint##bpp##_t)(g) & 0xFF) * client->format.greenMax + 127) / 255 \ + << client->format.greenShift | \ + (((uint##bpp##_t)(b) & 0xFF) * client->format.blueMax + 127) / 255 \ + << client->format.blueShift) + + +/********************************************************************* + * HandleCursorShape(). Support for XCursor and RichCursor shape + * updates. We emulate cursor operating on the frame buffer (that is + * why we call it "software cursor"). + ********************************************************************/ + +rfbBool HandleCursorShape(rfbClient* client,int xhot, int yhot, int width, int height, uint32_t enc) +{ + int bytesPerPixel; + size_t bytesPerRow, bytesMaskData; + rfbXCursorColors rgb; + uint32_t colors[2]; + char *buf; + uint8_t *ptr; + int x, y, b; + + bytesPerPixel = client->format.bitsPerPixel / 8; + bytesPerRow = (width + 7) / 8; + bytesMaskData = bytesPerRow * height; + + if (width * height == 0) + return TRUE; + + /* Allocate memory for pixel data and temporary mask data. */ + if(client->rcSource) + free(client->rcSource); + + client->rcSource = malloc(width * height * bytesPerPixel); + if (client->rcSource == NULL) + return FALSE; + + buf = malloc(bytesMaskData); + if (buf == NULL) { + free(client->rcSource); + client->rcSource = NULL; + return FALSE; + } + + /* Read and decode cursor pixel data, depending on the encoding type. */ + + if (enc == rfbEncodingXCursor) { + /* Read and convert background and foreground colors. */ + if (!ReadFromRFBServer(client, (char *)&rgb, sz_rfbXCursorColors)) { + free(client->rcSource); + client->rcSource = NULL; + free(buf); + return FALSE; + } + colors[0] = RGB24_TO_PIXEL(32, rgb.backRed, rgb.backGreen, rgb.backBlue); + colors[1] = RGB24_TO_PIXEL(32, rgb.foreRed, rgb.foreGreen, rgb.foreBlue); + + /* Read 1bpp pixel data into a temporary buffer. */ + if (!ReadFromRFBServer(client, buf, bytesMaskData)) { + free(client->rcSource); + client->rcSource = NULL; + free(buf); + return FALSE; + } + + /* Convert 1bpp data to byte-wide color indices. */ + ptr = client->rcSource; + for (y = 0; y < height; y++) { + for (x = 0; x < width / 8; x++) { + for (b = 7; b >= 0; b--) { + *ptr = buf[y * bytesPerRow + x] >> b & 1; + ptr += bytesPerPixel; + } + } + for (b = 7; b > 7 - width % 8; b--) { + *ptr = buf[y * bytesPerRow + x] >> b & 1; + ptr += bytesPerPixel; + } + } + + /* Convert indices into the actual pixel values. */ + switch (bytesPerPixel) { + case 1: + for (x = 0; x < width * height; x++) + client->rcSource[x] = (uint8_t)colors[client->rcSource[x]]; + break; + case 2: + for (x = 0; x < width * height; x++) + ((uint16_t *)client->rcSource)[x] = (uint16_t)colors[client->rcSource[x * 2]]; + break; + case 4: + for (x = 0; x < width * height; x++) + ((uint32_t *)client->rcSource)[x] = colors[client->rcSource[x * 4]]; + break; + } + + } else { /* enc == rfbEncodingRichCursor */ + + if (!ReadFromRFBServer(client, (char *)client->rcSource, width * height * bytesPerPixel)) { + free(client->rcSource); + client->rcSource = NULL; + free(buf); + return FALSE; + } + + } + + /* Read and decode mask data. */ + + if (!ReadFromRFBServer(client, buf, bytesMaskData)) { + free(client->rcSource); + client->rcSource = NULL; + free(buf); + return FALSE; + } + + client->rcMask = malloc(width * height); + if (client->rcMask == NULL) { + free(client->rcSource); + client->rcSource = NULL; + free(buf); + return FALSE; + } + + ptr = client->rcMask; + for (y = 0; y < height; y++) { + for (x = 0; x < width / 8; x++) { + for (b = 7; b >= 0; b--) { + *ptr++ = buf[y * bytesPerRow + x] >> b & 1; + } + } + for (b = 7; b > 7 - width % 8; b--) { + *ptr++ = buf[y * bytesPerRow + x] >> b & 1; + } + } + + if (client->GotCursorShape != NULL) { + client->GotCursorShape(client, xhot, yhot, width, height, bytesPerPixel); + } + + free(buf); + + return TRUE; +} + + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/hextile.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/hextile.c new file mode 100644 index 0000000..8698445 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/hextile.c @@ -0,0 +1,127 @@ +/* + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * hextile.c - handle hextile encoding. + * + * This file shouldn't be compiled directly. It is included multiple times by + * rfbproto.c, each time with a different definition of the macro BPP. For + * each value of BPP, this file defines a function which handles a hextile + * encoded rectangle with BPP bits per pixel. + */ + +#define HandleHextileBPP CONCAT2E(HandleHextile,BPP) +#define CARDBPP CONCAT3E(uint,BPP,_t) + +static rfbBool +HandleHextileBPP (rfbClient* client, int rx, int ry, int rw, int rh) +{ + CARDBPP bg, fg; + int i; + uint8_t *ptr; + int x, y, w, h; + int sx, sy, sw, sh; + uint8_t subencoding; + uint8_t nSubrects; + + for (y = ry; y < ry+rh; y += 16) { + for (x = rx; x < rx+rw; x += 16) { + w = h = 16; + if (rx+rw - x < 16) + w = rx+rw - x; + if (ry+rh - y < 16) + h = ry+rh - y; + + if (!ReadFromRFBServer(client, (char *)&subencoding, 1)) + return FALSE; + + if (subencoding & rfbHextileRaw) { + if (!ReadFromRFBServer(client, client->buffer, w * h * (BPP / 8))) + return FALSE; + + CopyRectangle(client, (uint8_t *)client->buffer, x, y, w, h); + + continue; + } + + if (subencoding & rfbHextileBackgroundSpecified) + if (!ReadFromRFBServer(client, (char *)&bg, sizeof(bg))) + return FALSE; + + FillRectangle(client, x, y, w, h, bg); + + if (subencoding & rfbHextileForegroundSpecified) + if (!ReadFromRFBServer(client, (char *)&fg, sizeof(fg))) + return FALSE; + + if (!(subencoding & rfbHextileAnySubrects)) { + continue; + } + + if (!ReadFromRFBServer(client, (char *)&nSubrects, 1)) + return FALSE; + + ptr = (uint8_t*)client->buffer; + + if (subencoding & rfbHextileSubrectsColoured) { + if (!ReadFromRFBServer(client, client->buffer, nSubrects * (2 + (BPP / 8)))) + return FALSE; + + for (i = 0; i < nSubrects; i++) { +#if BPP==8 + GET_PIXEL8(fg, ptr); +#elif BPP==16 + GET_PIXEL16(fg, ptr); +#elif BPP==32 + GET_PIXEL32(fg, ptr); +#else +#error "Invalid BPP" +#endif + sx = rfbHextileExtractX(*ptr); + sy = rfbHextileExtractY(*ptr); + ptr++; + sw = rfbHextileExtractW(*ptr); + sh = rfbHextileExtractH(*ptr); + ptr++; + + FillRectangle(client, x+sx, y+sy, sw, sh, fg); + } + + } else { + if (!ReadFromRFBServer(client, client->buffer, nSubrects * 2)) + return FALSE; + + for (i = 0; i < nSubrects; i++) { + sx = rfbHextileExtractX(*ptr); + sy = rfbHextileExtractY(*ptr); + ptr++; + sw = rfbHextileExtractW(*ptr); + sh = rfbHextileExtractH(*ptr); + ptr++; + + FillRectangle(client, x+sx, y+sy, sw, sh, fg); + } + } + } + } + + return TRUE; +} + +#undef CARDBPP diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/listen.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/listen.c new file mode 100644 index 0000000..c91ad6e --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/listen.c @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2011-2012 Christian Beier + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * listen.c - listen for incoming connections + */ + +#ifdef __STRICT_ANSI__ +#define _BSD_SOURCE +#endif +#include +#include +#ifdef __MINGW32__ +#define close closesocket +#include +#undef max +#else +#include +#include +#endif +#include +#include + +/* + * listenForIncomingConnections() - listen for incoming connections from + * servers, and fork a new process to deal with each connection. + */ + +void +listenForIncomingConnections(rfbClient* client) +{ +#ifdef __MINGW32__ + /* FIXME */ + rfbClientErr("listenForIncomingConnections on MinGW32 NOT IMPLEMENTED\n"); + return; +#else + int listenSocket, listen6Socket = -1; + fd_set fds; + + client->listenSpecified = TRUE; + + listenSocket = ListenAtTcpPortAndAddress(client->listenPort, client->listenAddress); + + if ((listenSocket < 0)) + return; + + rfbClientLog("%s -listen: Listening on port %d\n", + client->programName,client->listenPort); + rfbClientLog("%s -listen: Command line errors are not reported until " + "a connection comes in.\n", client->programName); + +#ifdef LIBVNCSERVER_IPv6 /* only try that if we're IPv6-capable, otherwise we may try to bind to the same port which would make all that listening fail */ + /* only do IPv6 listen of listen6Port is set */ + if (client->listen6Port > 0) + { + listen6Socket = ListenAtTcpPortAndAddress(client->listen6Port, client->listen6Address); + + if (listen6Socket < 0) + return; + + rfbClientLog("%s -listen: Listening on IPV6 port %d\n", + client->programName,client->listenPort); + rfbClientLog("%s -listen: Command line errors are not reported until " + "a connection comes in.\n", client->programName); + } +#endif + + while (TRUE) { + int r; + /* reap any zombies */ + int status, pid; + while ((pid= wait3(&status, WNOHANG, (struct rusage *)0))>0); + + /* TODO: callback for discard any events (like X11 events) */ + + FD_ZERO(&fds); + + if(listenSocket >= 0) + FD_SET(listenSocket, &fds); + if(listen6Socket >= 0) + FD_SET(listen6Socket, &fds); + + r = select(max(listenSocket, listen6Socket)+1, &fds, NULL, NULL, NULL); + + if (r > 0) { + if (FD_ISSET(listenSocket, &fds)) + client->sock = AcceptTcpConnection(client->listenSock); + else if (FD_ISSET(listen6Socket, &fds)) + client->sock = AcceptTcpConnection(client->listen6Sock); + + if (client->sock < 0) + return; + if (!SetNonBlocking(client->sock)) + return; + + /* Now fork off a new process to deal with it... */ + + switch (fork()) { + + case -1: + rfbClientErr("fork\n"); + return; + + case 0: + /* child - return to caller */ + close(listenSocket); + close(listen6Socket); + return; + + default: + /* parent - go round and listen again */ + close(client->sock); + break; + } + } + } +#endif +} + + + +/* + * listenForIncomingConnectionsNoFork() - listen for incoming connections + * from servers, but DON'T fork, instead just wait timeout microseconds. + * If timeout is negative, block indefinitly. + * Returns 1 on success (there was an incoming connection on the listen socket + * and we accepted it successfully), -1 on error, 0 on timeout. + */ + +int +listenForIncomingConnectionsNoFork(rfbClient* client, int timeout) +{ + fd_set fds; + struct timeval to; + int r; + + to.tv_sec= timeout / 1000000; + to.tv_usec= timeout % 1000000; + + client->listenSpecified = TRUE; + + if (client->listenSock < 0) + { + client->listenSock = ListenAtTcpPortAndAddress(client->listenPort, client->listenAddress); + + if (client->listenSock < 0) + return -1; + + rfbClientLog("%s -listennofork: Listening on port %d\n", + client->programName,client->listenPort); + rfbClientLog("%s -listennofork: Command line errors are not reported until " + "a connection comes in.\n", client->programName); + } + +#ifdef LIBVNCSERVER_IPv6 /* only try that if we're IPv6-capable, otherwise we may try to bind to the same port which would make all that listening fail */ + /* only do IPv6 listen of listen6Port is set */ + if (client->listen6Port > 0 && client->listen6Sock < 0) + { + client->listen6Sock = ListenAtTcpPortAndAddress(client->listen6Port, client->listen6Address); + + if (client->listen6Sock < 0) + return -1; + + rfbClientLog("%s -listennofork: Listening on IPV6 port %d\n", + client->programName,client->listenPort); + rfbClientLog("%s -listennofork: Command line errors are not reported until " + "a connection comes in.\n", client->programName); + } +#endif + + FD_ZERO(&fds); + + if(client->listenSock >= 0) + FD_SET(client->listenSock, &fds); + if(client->listen6Sock >= 0) + FD_SET(client->listen6Sock, &fds); + + if (timeout < 0) + r = select(max(client->listenSock, client->listen6Sock) +1, &fds, NULL, NULL, NULL); + else + r = select(max(client->listenSock, client->listen6Sock) +1, &fds, NULL, NULL, &to); + + if (r > 0) + { + if (FD_ISSET(client->listenSock, &fds)) + client->sock = AcceptTcpConnection(client->listenSock); + else if (FD_ISSET(client->listen6Sock, &fds)) + client->sock = AcceptTcpConnection(client->listen6Sock); + + if (client->sock < 0) + return -1; + if (!SetNonBlocking(client->sock)) + return -1; + + if(client->listenSock >= 0) { + close(client->listenSock); + client->listenSock = -1; + } + if(client->listen6Sock >= 0) { + close(client->listen6Sock); + client->listen6Sock = -1; + } + return r; + } + + /* r is now either 0 (timeout) or -1 (error) */ + return r; +} + + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/rfbproto.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/rfbproto.c new file mode 100644 index 0000000..8064b56 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/rfbproto.c @@ -0,0 +1,2403 @@ +/* + * Copyright (C) 2000-2002 Constantin Kaplinsky. All Rights Reserved. + * Copyright (C) 2000 Tridia Corporation. All Rights Reserved. + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * rfbproto.c - functions to deal with client side of RFB protocol. + */ + +#ifdef __STRICT_ANSI__ +#define _BSD_SOURCE +#define _POSIX_SOURCE +#endif +#ifndef WIN32 +#include +#include +#include +#include +#endif +#include +#include +#ifdef WIN32 +#undef SOCKET +#undef socklen_t +#endif +#ifdef LIBVNCSERVER_HAVE_LIBZ +#include +#ifdef __CHECKER__ +#undef Z_NULL +#define Z_NULL NULL +#endif +#endif +#ifdef LIBVNCSERVER_HAVE_LIBJPEG +#ifdef _RPCNDR_H /* This Windows header typedefs 'boolean', jpeglib has to know */ +#define HAVE_BOOLEAN +#endif +#include +#endif +#include +#include + +#ifdef LIBVNCSERVER_WITH_CLIENT_GCRYPT +#include +#endif + +#include "minilzo.h" +#include "tls.h" + +/* + * rfbClientLog prints a time-stamped message to the log file (stderr). + */ + +rfbBool rfbEnableClientLogging=TRUE; + +static void +rfbDefaultClientLog(const char *format, ...) +{ + va_list args; + char buf[256]; + time_t log_clock; + + if(!rfbEnableClientLogging) + return; + + va_start(args, format); + + time(&log_clock); + strftime(buf, 255, "%d/%m/%Y %X ", localtime(&log_clock)); + fprintf(stderr, "%s", buf); + + vfprintf(stderr, format, args); + fflush(stderr); + + va_end(args); +} + +rfbClientLogProc rfbClientLog=rfbDefaultClientLog; +rfbClientLogProc rfbClientErr=rfbDefaultClientLog; + +/* extensions */ + +rfbClientProtocolExtension* rfbClientExtensions = NULL; + +void rfbClientRegisterExtension(rfbClientProtocolExtension* e) +{ + e->next = rfbClientExtensions; + rfbClientExtensions = e; +} + +/* client data */ + +void rfbClientSetClientData(rfbClient* client, void* tag, void* data) +{ + rfbClientData* clientData = client->clientData; + + while(clientData && clientData->tag != tag) + clientData = clientData->next; + if(clientData == NULL) { + clientData = calloc(sizeof(rfbClientData), 1); + clientData->next = client->clientData; + client->clientData = clientData; + clientData->tag = tag; + } + + clientData->data = data; +} + +void* rfbClientGetClientData(rfbClient* client, void* tag) +{ + rfbClientData* clientData = client->clientData; + + while(clientData) { + if(clientData->tag == tag) + return clientData->data; + clientData = clientData->next; + } + + return NULL; +} + +/* messages */ + +static void FillRectangle(rfbClient* client, int x, int y, int w, int h, uint32_t colour) { + int i,j; + +#define FILL_RECT(BPP) \ + for(j=y*client->width;j<(y+h)*client->width;j+=client->width) \ + for(i=x;iframeBuffer)[j+i]=colour; + + switch(client->format.bitsPerPixel) { + case 8: FILL_RECT(8); break; + case 16: FILL_RECT(16); break; + case 32: FILL_RECT(32); break; + default: + rfbClientLog("Unsupported bitsPerPixel: %d\n",client->format.bitsPerPixel); + } +} + +static void CopyRectangle(rfbClient* client, uint8_t* buffer, int x, int y, int w, int h) { + int j; + +#define COPY_RECT(BPP) \ + { \ + int rs = w * BPP / 8, rs2 = client->width * BPP / 8; \ + for (j = ((x * (BPP / 8)) + (y * rs2)); j < (y + h) * rs2; j += rs2) { \ + memcpy(client->frameBuffer + j, buffer, rs); \ + buffer += rs; \ + } \ + } + + switch(client->format.bitsPerPixel) { + case 8: COPY_RECT(8); break; + case 16: COPY_RECT(16); break; + case 32: COPY_RECT(32); break; + default: + rfbClientLog("Unsupported bitsPerPixel: %d\n",client->format.bitsPerPixel); + } +} + +/* TODO: test */ +static void CopyRectangleFromRectangle(rfbClient* client, int src_x, int src_y, int w, int h, int dest_x, int dest_y) { + int i,j; + +#define COPY_RECT_FROM_RECT(BPP) \ + { \ + uint##BPP##_t* _buffer=((uint##BPP##_t*)client->frameBuffer)+(src_y-dest_y)*client->width+src_x-dest_x; \ + if (dest_y < src_y) { \ + for(j = dest_y*client->width; j < (dest_y+h)*client->width; j += client->width) { \ + if (dest_x < src_x) { \ + for(i = dest_x; i < dest_x+w; i++) { \ + ((uint##BPP##_t*)client->frameBuffer)[j+i]=_buffer[j+i]; \ + } \ + } else { \ + for(i = dest_x+w-1; i >= dest_x; i--) { \ + ((uint##BPP##_t*)client->frameBuffer)[j+i]=_buffer[j+i]; \ + } \ + } \ + } \ + } else { \ + for(j = (dest_y+h-1)*client->width; j >= dest_y*client->width; j-=client->width) { \ + if (dest_x < src_x) { \ + for(i = dest_x; i < dest_x+w; i++) { \ + ((uint##BPP##_t*)client->frameBuffer)[j+i]=_buffer[j+i]; \ + } \ + } else { \ + for(i = dest_x+w-1; i >= dest_x; i--) { \ + ((uint##BPP##_t*)client->frameBuffer)[j+i]=_buffer[j+i]; \ + } \ + } \ + } \ + } \ + } + + switch(client->format.bitsPerPixel) { + case 8: COPY_RECT_FROM_RECT(8); break; + case 16: COPY_RECT_FROM_RECT(16); break; + case 32: COPY_RECT_FROM_RECT(32); break; + default: + rfbClientLog("Unsupported bitsPerPixel: %d\n",client->format.bitsPerPixel); + } +} + +static rfbBool HandleRRE8(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleRRE16(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleRRE32(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleCoRRE8(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleCoRRE16(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleCoRRE32(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleHextile8(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleHextile16(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleHextile32(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleUltra8(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleUltra16(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleUltra32(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleUltraZip8(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleUltraZip16(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleUltraZip32(rfbClient* client, int rx, int ry, int rw, int rh); +#ifdef LIBVNCSERVER_HAVE_LIBZ +static rfbBool HandleZlib8(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleZlib16(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleZlib32(rfbClient* client, int rx, int ry, int rw, int rh); +#ifdef LIBVNCSERVER_HAVE_LIBJPEG +static rfbBool HandleTight8(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleTight16(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleTight32(rfbClient* client, int rx, int ry, int rw, int rh); + +static long ReadCompactLen (rfbClient* client); + +static void JpegInitSource(j_decompress_ptr cinfo); +static boolean JpegFillInputBuffer(j_decompress_ptr cinfo); +static void JpegSkipInputData(j_decompress_ptr cinfo, long num_bytes); +static void JpegTermSource(j_decompress_ptr cinfo); +static void JpegSetSrcManager(j_decompress_ptr cinfo, uint8_t *compressedData, + int compressedLen); +#endif +static rfbBool HandleZRLE8(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleZRLE15(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleZRLE16(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleZRLE24(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleZRLE24Up(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleZRLE24Down(rfbClient* client, int rx, int ry, int rw, int rh); +static rfbBool HandleZRLE32(rfbClient* client, int rx, int ry, int rw, int rh); +#endif + +/* + * Server Capability Functions + */ +rfbBool +SupportsClient2Server(rfbClient* client, int messageType) +{ + return (client->supportedMessages.client2server[((messageType & 0xFF)/8)] & (1<<(messageType % 8)) ? TRUE : FALSE); +} + +rfbBool +SupportsServer2Client(rfbClient* client, int messageType) +{ + return (client->supportedMessages.server2client[((messageType & 0xFF)/8)] & (1<<(messageType % 8)) ? TRUE : FALSE); +} + +void +SetClient2Server(rfbClient* client, int messageType) +{ + client->supportedMessages.client2server[((messageType & 0xFF)/8)] |= (1<<(messageType % 8)); +} + +void +SetServer2Client(rfbClient* client, int messageType) +{ + client->supportedMessages.server2client[((messageType & 0xFF)/8)] |= (1<<(messageType % 8)); +} + +void +ClearClient2Server(rfbClient* client, int messageType) +{ + client->supportedMessages.client2server[((messageType & 0xFF)/8)] &= (!(1<<(messageType % 8))); +} + +void +ClearServer2Client(rfbClient* client, int messageType) +{ + client->supportedMessages.server2client[((messageType & 0xFF)/8)] &= (!(1<<(messageType % 8))); +} + + +void +DefaultSupportedMessages(rfbClient* client) +{ + memset((char *)&client->supportedMessages,0,sizeof(client->supportedMessages)); + + /* Default client supported messages (universal RFB 3.3 protocol) */ + SetClient2Server(client, rfbSetPixelFormat); + /* SetClient2Server(client, rfbFixColourMapEntries); Not currently supported */ + SetClient2Server(client, rfbSetEncodings); + SetClient2Server(client, rfbFramebufferUpdateRequest); + SetClient2Server(client, rfbKeyEvent); + SetClient2Server(client, rfbPointerEvent); + SetClient2Server(client, rfbClientCutText); + /* technically, we only care what we can *send* to the server + * but, we set Server2Client Just in case it ever becomes useful + */ + SetServer2Client(client, rfbFramebufferUpdate); + SetServer2Client(client, rfbSetColourMapEntries); + SetServer2Client(client, rfbBell); + SetServer2Client(client, rfbServerCutText); +} + +void +DefaultSupportedMessagesUltraVNC(rfbClient* client) +{ + DefaultSupportedMessages(client); + SetClient2Server(client, rfbFileTransfer); + SetClient2Server(client, rfbSetScale); + SetClient2Server(client, rfbSetServerInput); + SetClient2Server(client, rfbSetSW); + SetClient2Server(client, rfbTextChat); + SetClient2Server(client, rfbPalmVNCSetScaleFactor); + /* technically, we only care what we can *send* to the server */ + SetServer2Client(client, rfbResizeFrameBuffer); + SetServer2Client(client, rfbPalmVNCReSizeFrameBuffer); + SetServer2Client(client, rfbFileTransfer); + SetServer2Client(client, rfbTextChat); +} + + +void +DefaultSupportedMessagesTightVNC(rfbClient* client) +{ + DefaultSupportedMessages(client); + SetClient2Server(client, rfbFileTransfer); + SetClient2Server(client, rfbSetServerInput); + SetClient2Server(client, rfbSetSW); + /* SetClient2Server(client, rfbTextChat); */ + /* technically, we only care what we can *send* to the server */ + SetServer2Client(client, rfbFileTransfer); + SetServer2Client(client, rfbTextChat); +} + +#ifndef WIN32 +static rfbBool +IsUnixSocket(const char *name) +{ + struct stat sb; + if(stat(name, &sb) == 0 && (sb.st_mode & S_IFMT) == S_IFSOCK) + return TRUE; + return FALSE; +} +#endif + +/* + * ConnectToRFBServer. + */ + +rfbBool +ConnectToRFBServer(rfbClient* client,const char *hostname, int port) +{ + if (client->serverPort==-1) { + /* serverHost is a file recorded by vncrec. */ + const char* magic="vncLog0.0"; + char buffer[10]; + rfbVNCRec* rec = (rfbVNCRec*)malloc(sizeof(rfbVNCRec)); + client->vncRec = rec; + + rec->file = fopen(client->serverHost,"rb"); + rec->tv.tv_sec = 0; + rec->readTimestamp = FALSE; + rec->doNotSleep = FALSE; + + if (!rec->file) { + rfbClientLog("Could not open %s.\n",client->serverHost); + return FALSE; + } + setbuf(rec->file,NULL); + fread(buffer,1,strlen(magic),rec->file); + if (strncmp(buffer,magic,strlen(magic))) { + rfbClientLog("File %s was not recorded by vncrec.\n",client->serverHost); + fclose(rec->file); + return FALSE; + } + client->sock = -1; + return TRUE; + } + +#ifndef WIN32 + if(IsUnixSocket(hostname)) + /* serverHost is a UNIX socket. */ + client->sock = ConnectClientToUnixSock(hostname); + else +#endif + { +#ifdef LIBVNCSERVER_IPv6 + client->sock = ConnectClientToTcpAddr6(hostname, port); + if (client->sock == -1) +#endif + { + unsigned int host; + + /* serverHost is a hostname */ + if (!StringToIPAddr(hostname, &host)) { + rfbClientLog("Couldn't convert '%s' to host address\n", hostname); + return FALSE; + } + client->sock = ConnectClientToTcpAddr(host, port); + } + } + + if (client->sock < 0) { + rfbClientLog("Unable to connect to VNC server\n"); + return FALSE; + } + + if(client->QoS_DSCP && !SetDSCP(client->sock, client->QoS_DSCP)) + return FALSE; + + return SetNonBlocking(client->sock); +} + +/* + * ConnectToRFBRepeater. + */ + +rfbBool ConnectToRFBRepeater(rfbClient* client,const char *repeaterHost, int repeaterPort, const char *destHost, int destPort) +{ + rfbProtocolVersionMsg pv; + int major,minor; + char tmphost[250]; + +#ifdef LIBVNCSERVER_IPv6 + client->sock = ConnectClientToTcpAddr6(repeaterHost, repeaterPort); + if (client->sock == -1) +#endif + { + unsigned int host; + if (!StringToIPAddr(repeaterHost, &host)) { + rfbClientLog("Couldn't convert '%s' to host address\n", repeaterHost); + return FALSE; + } + + client->sock = ConnectClientToTcpAddr(host, repeaterPort); + } + + if (client->sock < 0) { + rfbClientLog("Unable to connect to VNC repeater\n"); + return FALSE; + } + + if (!SetNonBlocking(client->sock)) + return FALSE; + + if (!ReadFromRFBServer(client, pv, sz_rfbProtocolVersionMsg)) + return FALSE; + pv[sz_rfbProtocolVersionMsg] = 0; + + /* UltraVNC repeater always report version 000.000 to identify itself */ + if (sscanf(pv,rfbProtocolVersionFormat,&major,&minor) != 2 || major != 0 || minor != 0) { + rfbClientLog("Not a valid VNC repeater (%s)\n",pv); + return FALSE; + } + + rfbClientLog("Connected to VNC repeater, using protocol version %d.%d\n", major, minor); + + snprintf(tmphost, sizeof(tmphost), "%s:%d", destHost, destPort); + if (!WriteToRFBServer(client, tmphost, sizeof(tmphost))) + return FALSE; + + return TRUE; +} + +extern void rfbClientEncryptBytes(unsigned char* bytes, char* passwd); +extern void rfbClientEncryptBytes2(unsigned char *where, const int length, unsigned char *key); + +rfbBool +rfbHandleAuthResult(rfbClient* client) +{ + uint32_t authResult=0, reasonLen=0; + char *reason=NULL; + + if (!ReadFromRFBServer(client, (char *)&authResult, 4)) return FALSE; + + authResult = rfbClientSwap32IfLE(authResult); + + switch (authResult) { + case rfbVncAuthOK: + rfbClientLog("VNC authentication succeeded\n"); + return TRUE; + break; + case rfbVncAuthFailed: + if (client->major==3 && client->minor>7) + { + /* we have an error following */ + if (!ReadFromRFBServer(client, (char *)&reasonLen, 4)) return FALSE; + reasonLen = rfbClientSwap32IfLE(reasonLen); + reason = malloc(reasonLen+1); + if (!ReadFromRFBServer(client, reason, reasonLen)) { free(reason); return FALSE; } + reason[reasonLen]=0; + rfbClientLog("VNC connection failed: %s\n",reason); + free(reason); + return FALSE; + } + rfbClientLog("VNC authentication failed\n"); + return FALSE; + case rfbVncAuthTooMany: + rfbClientLog("VNC authentication failed - too many tries\n"); + return FALSE; + } + + rfbClientLog("Unknown VNC authentication result: %d\n", + (int)authResult); + return FALSE; +} + +static void +ReadReason(rfbClient* client) +{ + uint32_t reasonLen; + char *reason; + + /* we have an error following */ + if (!ReadFromRFBServer(client, (char *)&reasonLen, 4)) return; + reasonLen = rfbClientSwap32IfLE(reasonLen); + reason = malloc(reasonLen+1); + if (!ReadFromRFBServer(client, reason, reasonLen)) { free(reason); return; } + reason[reasonLen]=0; + rfbClientLog("VNC connection failed: %s\n",reason); + free(reason); +} + +static rfbBool +ReadSupportedSecurityType(rfbClient* client, uint32_t *result, rfbBool subAuth) +{ + uint8_t count=0; + uint8_t loop=0; + uint8_t flag=0; + uint8_t tAuth[256]; + char buf1[500],buf2[10]; + uint32_t authScheme; + + if (!ReadFromRFBServer(client, (char *)&count, 1)) return FALSE; + + if (count==0) + { + rfbClientLog("List of security types is ZERO, expecting an error to follow\n"); + ReadReason(client); + return FALSE; + } + + rfbClientLog("We have %d security types to read\n", count); + authScheme=0; + /* now, we have a list of available security types to read ( uint8_t[] ) */ + for (loop=0;loopGetCredential) || + (!subAuth && (tAuth[loop]==rfbTLS || (tAuth[loop]==rfbVeNCrypt && client->GetCredential)))) + { + if (!subAuth && client->clientAuthSchemes) + { + int i; + for (i=0;client->clientAuthSchemes[i];i++) + { + if (client->clientAuthSchemes[i]==(uint32_t)tAuth[loop]) + { + flag++; + authScheme=tAuth[loop]; + break; + } + } + } + else + { + flag++; + authScheme=tAuth[loop]; + } + if (flag) + { + rfbClientLog("Selecting security type %d (%d/%d in the list)\n", authScheme, loop, count); + /* send back a single byte indicating which security type to use */ + if (!WriteToRFBServer(client, (char *)&tAuth[loop], 1)) return FALSE; + } + } + } + if (authScheme==0) + { + memset(buf1, 0, sizeof(buf1)); + for (loop=0;loop=sizeof(buf1)-1) break; + snprintf(buf2, sizeof(buf2), (loop>0 ? ", %d" : "%d"), (int)tAuth[loop]); + strncat(buf1, buf2, sizeof(buf1)-strlen(buf1)-1); + } + rfbClientLog("Unknown authentication scheme from VNC server: %s\n", + buf1); + return FALSE; + } + *result = authScheme; + return TRUE; +} + +static rfbBool +HandleVncAuth(rfbClient *client) +{ + uint8_t challenge[CHALLENGESIZE]; + char *passwd=NULL; + int i; + + if (!ReadFromRFBServer(client, (char *)challenge, CHALLENGESIZE)) return FALSE; + + if (client->serverPort!=-1) { /* if not playing a vncrec file */ + if (client->GetPassword) + passwd = client->GetPassword(client); + + if ((!passwd) || (strlen(passwd) == 0)) { + rfbClientLog("Reading password failed\n"); + return FALSE; + } + if (strlen(passwd) > 8) { + passwd[8] = '\0'; + } + + rfbClientEncryptBytes(challenge, passwd); + + /* Lose the password from memory */ + for (i = strlen(passwd); i >= 0; i--) { + passwd[i] = '\0'; + } + free(passwd); + + if (!WriteToRFBServer(client, (char *)challenge, CHALLENGESIZE)) return FALSE; + } + + /* Handle the SecurityResult message */ + if (!rfbHandleAuthResult(client)) return FALSE; + + return TRUE; +} + +static void +FreeUserCredential(rfbCredential *cred) +{ + if (cred->userCredential.username) free(cred->userCredential.username); + if (cred->userCredential.password) free(cred->userCredential.password); + free(cred); +} + +static rfbBool +HandlePlainAuth(rfbClient *client) +{ + uint32_t ulen, ulensw; + uint32_t plen, plensw; + rfbCredential *cred; + + if (!client->GetCredential) + { + rfbClientLog("GetCredential callback is not set.\n"); + return FALSE; + } + cred = client->GetCredential(client, rfbCredentialTypeUser); + if (!cred) + { + rfbClientLog("Reading credential failed\n"); + return FALSE; + } + + ulen = (cred->userCredential.username ? strlen(cred->userCredential.username) : 0); + ulensw = rfbClientSwap32IfLE(ulen); + plen = (cred->userCredential.password ? strlen(cred->userCredential.password) : 0); + plensw = rfbClientSwap32IfLE(plen); + if (!WriteToRFBServer(client, (char *)&ulensw, 4) || + !WriteToRFBServer(client, (char *)&plensw, 4)) + { + FreeUserCredential(cred); + return FALSE; + } + if (ulen > 0) + { + if (!WriteToRFBServer(client, cred->userCredential.username, ulen)) + { + FreeUserCredential(cred); + return FALSE; + } + } + if (plen > 0) + { + if (!WriteToRFBServer(client, cred->userCredential.password, plen)) + { + FreeUserCredential(cred); + return FALSE; + } + } + + FreeUserCredential(cred); + + /* Handle the SecurityResult message */ + if (!rfbHandleAuthResult(client)) return FALSE; + + return TRUE; +} + +/* Simple 64bit big integer arithmetic implementation */ +/* (x + y) % m, works even if (x + y) > 64bit */ +#define rfbAddM64(x,y,m) ((x+y)%m+(x+y0;x>>=1) + { + if (x&1) r=rfbAddM64(r,y,m); + y=rfbAddM64(y,y,m); + } + return r; +} +/* (x ^ y) % m */ +static uint64_t +rfbPowM64(uint64_t b, uint64_t e, uint64_t m) +{ + uint64_t r; + for(r=1;e>0;e>>=1) + { + if(e&1) r=rfbMulM64(r,b,m); + b=rfbMulM64(b,b,m); + } + return r; +} + +static rfbBool +HandleMSLogonAuth(rfbClient *client) +{ + uint64_t gen, mod, resp, priv, pub, key; + uint8_t username[256], password[64]; + rfbCredential *cred; + + if (!ReadFromRFBServer(client, (char *)&gen, 8)) return FALSE; + if (!ReadFromRFBServer(client, (char *)&mod, 8)) return FALSE; + if (!ReadFromRFBServer(client, (char *)&resp, 8)) return FALSE; + gen = rfbClientSwap64IfLE(gen); + mod = rfbClientSwap64IfLE(mod); + resp = rfbClientSwap64IfLE(resp); + + if (!client->GetCredential) + { + rfbClientLog("GetCredential callback is not set.\n"); + return FALSE; + } + rfbClientLog("WARNING! MSLogon security type has very low password encryption! "\ + "Use it only with SSH tunnel or trusted network.\n"); + cred = client->GetCredential(client, rfbCredentialTypeUser); + if (!cred) + { + rfbClientLog("Reading credential failed\n"); + return FALSE; + } + + memset(username, 0, sizeof(username)); + strncpy((char *)username, cred->userCredential.username, sizeof(username)); + memset(password, 0, sizeof(password)); + strncpy((char *)password, cred->userCredential.password, sizeof(password)); + FreeUserCredential(cred); + + srand(time(NULL)); + priv = ((uint64_t)rand())<<32; + priv |= (uint64_t)rand(); + + pub = rfbPowM64(gen, priv, mod); + key = rfbPowM64(resp, priv, mod); + pub = rfbClientSwap64IfLE(pub); + key = rfbClientSwap64IfLE(key); + + rfbClientEncryptBytes2(username, sizeof(username), (unsigned char *)&key); + rfbClientEncryptBytes2(password, sizeof(password), (unsigned char *)&key); + + if (!WriteToRFBServer(client, (char *)&pub, 8)) return FALSE; + if (!WriteToRFBServer(client, (char *)username, sizeof(username))) return FALSE; + if (!WriteToRFBServer(client, (char *)password, sizeof(password))) return FALSE; + + /* Handle the SecurityResult message */ + if (!rfbHandleAuthResult(client)) return FALSE; + + return TRUE; +} + +#ifdef LIBVNCSERVER_WITH_CLIENT_GCRYPT +static rfbBool +rfbMpiToBytes(const gcry_mpi_t value, uint8_t *result, size_t size) +{ + gcry_error_t error; + size_t len; + int i; + + error = gcry_mpi_print(GCRYMPI_FMT_USG, result, size, &len, value); + if (gcry_err_code(error) != GPG_ERR_NO_ERROR) + { + rfbClientLog("gcry_mpi_print error: %s\n", gcry_strerror(error)); + return FALSE; + } + for (i=size-1;i>(int)size-1-(int)len;--i) + result[i] = result[i-size+len]; + for (;i>=0;--i) + result[i] = 0; + return TRUE; +} + +static rfbBool +HandleARDAuth(rfbClient *client) +{ + uint8_t gen[2], len[2]; + size_t keylen; + uint8_t *mod = NULL, *resp, *pub, *key, *shared; + gcry_mpi_t genmpi = NULL, modmpi = NULL, respmpi = NULL; + gcry_mpi_t privmpi = NULL, pubmpi = NULL, keympi = NULL; + gcry_md_hd_t md5 = NULL; + gcry_cipher_hd_t aes = NULL; + gcry_error_t error; + uint8_t userpass[128], ciphertext[128]; + int passwordLen, usernameLen; + rfbCredential *cred = NULL; + rfbBool result = FALSE; + + while (1) + { + if (!ReadFromRFBServer(client, (char *)gen, 2)) + break; + if (!ReadFromRFBServer(client, (char *)len, 2)) + break; + + if (!client->GetCredential) + { + rfbClientLog("GetCredential callback is not set.\n"); + break; + } + cred = client->GetCredential(client, rfbCredentialTypeUser); + if (!cred) + { + rfbClientLog("Reading credential failed\n"); + break; + } + + keylen = 256*len[0]+len[1]; + mod = (uint8_t*)malloc(keylen*4); + if (!mod) + { + rfbClientLog("malloc out of memory\n"); + break; + } + resp = mod+keylen; + pub = resp+keylen; + key = pub+keylen; + + if (!ReadFromRFBServer(client, (char *)mod, keylen)) + break; + if (!ReadFromRFBServer(client, (char *)resp, keylen)) + break; + + error = gcry_mpi_scan(&genmpi, GCRYMPI_FMT_USG, gen, 2, NULL); + if (gcry_err_code(error) != GPG_ERR_NO_ERROR) + { + rfbClientLog("gcry_mpi_scan error: %s\n", gcry_strerror(error)); + break; + } + error = gcry_mpi_scan(&modmpi, GCRYMPI_FMT_USG, mod, keylen, NULL); + if (gcry_err_code(error) != GPG_ERR_NO_ERROR) + { + rfbClientLog("gcry_mpi_scan error: %s\n", gcry_strerror(error)); + break; + } + error = gcry_mpi_scan(&respmpi, GCRYMPI_FMT_USG, resp, keylen, NULL); + if (gcry_err_code(error) != GPG_ERR_NO_ERROR) + { + rfbClientLog("gcry_mpi_scan error: %s\n", gcry_strerror(error)); + break; + } + + privmpi = gcry_mpi_new(keylen); + if (!privmpi) + { + rfbClientLog("gcry_mpi_new out of memory\n"); + break; + } + gcry_mpi_randomize(privmpi, (keylen/8)*8, GCRY_STRONG_RANDOM); + + pubmpi = gcry_mpi_new(keylen); + if (!pubmpi) + { + rfbClientLog("gcry_mpi_new out of memory\n"); + break; + } + gcry_mpi_powm(pubmpi, genmpi, privmpi, modmpi); + + keympi = gcry_mpi_new(keylen); + if (!keympi) + { + rfbClientLog("gcry_mpi_new out of memory\n"); + break; + } + gcry_mpi_powm(keympi, respmpi, privmpi, modmpi); + + if (!rfbMpiToBytes(pubmpi, pub, keylen)) + break; + if (!rfbMpiToBytes(keympi, key, keylen)) + break; + + error = gcry_md_open(&md5, GCRY_MD_MD5, 0); + if (gcry_err_code(error) != GPG_ERR_NO_ERROR) + { + rfbClientLog("gcry_md_open error: %s\n", gcry_strerror(error)); + break; + } + gcry_md_write(md5, key, keylen); + error = gcry_md_final(md5); + if (gcry_err_code(error) != GPG_ERR_NO_ERROR) + { + rfbClientLog("gcry_md_final error: %s\n", gcry_strerror(error)); + break; + } + shared = gcry_md_read(md5, GCRY_MD_MD5); + + passwordLen = strlen(cred->userCredential.password)+1; + usernameLen = strlen(cred->userCredential.username)+1; + if (passwordLen > sizeof(userpass)/2) + passwordLen = sizeof(userpass)/2; + if (usernameLen > sizeof(userpass)/2) + usernameLen = sizeof(userpass)/2; + + gcry_randomize(userpass, sizeof(userpass), GCRY_STRONG_RANDOM); + memcpy(userpass, cred->userCredential.username, usernameLen); + memcpy(userpass+sizeof(userpass)/2, cred->userCredential.password, passwordLen); + + error = gcry_cipher_open(&aes, GCRY_CIPHER_AES128, GCRY_CIPHER_MODE_ECB, 0); + if (gcry_err_code(error) != GPG_ERR_NO_ERROR) + { + rfbClientLog("gcry_cipher_open error: %s\n", gcry_strerror(error)); + break; + } + error = gcry_cipher_setkey(aes, shared, 16); + if (gcry_err_code(error) != GPG_ERR_NO_ERROR) + { + rfbClientLog("gcry_cipher_setkey error: %s\n", gcry_strerror(error)); + break; + } + error = gcry_cipher_encrypt(aes, ciphertext, sizeof(ciphertext), userpass, sizeof(userpass)); + if (gcry_err_code(error) != GPG_ERR_NO_ERROR) + { + rfbClientLog("gcry_cipher_encrypt error: %s\n", gcry_strerror(error)); + break; + } + + if (!WriteToRFBServer(client, (char *)ciphertext, sizeof(ciphertext))) + break; + if (!WriteToRFBServer(client, (char *)pub, keylen)) + break; + + /* Handle the SecurityResult message */ + if (!rfbHandleAuthResult(client)) + break; + + result = TRUE; + break; + } + + if (cred) + FreeUserCredential(cred); + if (mod) + free(mod); + if (genmpi) + gcry_mpi_release(genmpi); + if (modmpi) + gcry_mpi_release(modmpi); + if (respmpi) + gcry_mpi_release(respmpi); + if (privmpi) + gcry_mpi_release(privmpi); + if (pubmpi) + gcry_mpi_release(pubmpi); + if (keympi) + gcry_mpi_release(keympi); + if (md5) + gcry_md_close(md5); + if (aes) + gcry_cipher_close(aes); + return result; +} +#endif + +/* + * SetClientAuthSchemes. + */ + +void +SetClientAuthSchemes(rfbClient* client,const uint32_t *authSchemes, int size) +{ + int i; + + if (client->clientAuthSchemes) + { + free(client->clientAuthSchemes); + client->clientAuthSchemes = NULL; + } + if (authSchemes) + { + if (size<0) + { + /* If size<0 we assume the passed-in list is also 0-terminate, so we + * calculate the size here */ + for (size=0;authSchemes[size];size++) ; + } + client->clientAuthSchemes = (uint32_t*)malloc(sizeof(uint32_t)*(size+1)); + for (i=0;iclientAuthSchemes[i] = authSchemes[i]; + client->clientAuthSchemes[size] = 0; + } +} + +/* + * InitialiseRFBConnection. + */ + +rfbBool +InitialiseRFBConnection(rfbClient* client) +{ + rfbProtocolVersionMsg pv; + int major,minor; + uint32_t authScheme; + uint32_t subAuthScheme; + rfbClientInitMsg ci; + + /* if the connection is immediately closed, don't report anything, so + that pmw's monitor can make test connections */ + + if (client->listenSpecified) + errorMessageOnReadFailure = FALSE; + + if (!ReadFromRFBServer(client, pv, sz_rfbProtocolVersionMsg)) return FALSE; + pv[sz_rfbProtocolVersionMsg]=0; + + errorMessageOnReadFailure = TRUE; + + pv[sz_rfbProtocolVersionMsg] = 0; + + if (sscanf(pv,rfbProtocolVersionFormat,&major,&minor) != 2) { + rfbClientLog("Not a valid VNC server (%s)\n",pv); + return FALSE; + } + + + DefaultSupportedMessages(client); + client->major = major; + client->minor = minor; + + /* fall back to viewer supported version */ + if ((major==rfbProtocolMajorVersion) && (minor>rfbProtocolMinorVersion)) + client->minor = rfbProtocolMinorVersion; + + /* UltraVNC uses minor codes 4 and 6 for the server */ + if (major==3 && (minor==4 || minor==6)) { + rfbClientLog("UltraVNC server detected, enabling UltraVNC specific messages\n",pv); + DefaultSupportedMessagesUltraVNC(client); + } + + /* UltraVNC Single Click uses minor codes 14 and 16 for the server */ + if (major==3 && (minor==14 || minor==16)) { + minor = minor - 10; + client->minor = minor; + rfbClientLog("UltraVNC Single Click server detected, enabling UltraVNC specific messages\n",pv); + DefaultSupportedMessagesUltraVNC(client); + } + + /* TightVNC uses minor codes 5 for the server */ + if (major==3 && minor==5) { + rfbClientLog("TightVNC server detected, enabling TightVNC specific messages\n",pv); + DefaultSupportedMessagesTightVNC(client); + } + + /* we do not support > RFB3.8 */ + if ((major==3 && minor>8) || major>3) + { + client->major=3; + client->minor=8; + } + + rfbClientLog("VNC server supports protocol version %d.%d (viewer %d.%d)\n", + major, minor, rfbProtocolMajorVersion, rfbProtocolMinorVersion); + + sprintf(pv,rfbProtocolVersionFormat,client->major,client->minor); + + if (!WriteToRFBServer(client, pv, sz_rfbProtocolVersionMsg)) return FALSE; + + + /* 3.7 and onwards sends a # of security types first */ + if (client->major==3 && client->minor > 6) + { + if (!ReadSupportedSecurityType(client, &authScheme, FALSE)) return FALSE; + } + else + { + if (!ReadFromRFBServer(client, (char *)&authScheme, 4)) return FALSE; + authScheme = rfbClientSwap32IfLE(authScheme); + } + + rfbClientLog("Selected Security Scheme %d\n", authScheme); + client->authScheme = authScheme; + + switch (authScheme) { + + case rfbConnFailed: + ReadReason(client); + return FALSE; + + case rfbNoAuth: + rfbClientLog("No authentication needed\n"); + + /* 3.8 and upwards sends a Security Result for rfbNoAuth */ + if ((client->major==3 && client->minor > 7) || client->major>3) + if (!rfbHandleAuthResult(client)) return FALSE; + + break; + + case rfbVncAuth: + if (!HandleVncAuth(client)) return FALSE; + break; + + case rfbMSLogon: + if (!HandleMSLogonAuth(client)) return FALSE; + break; + + case rfbARD: +#ifndef LIBVNCSERVER_WITH_CLIENT_GCRYPT + rfbClientLog("GCrypt support was not compiled in\n"); + return FALSE; +#else + if (!HandleARDAuth(client)) return FALSE; +#endif + break; + + case rfbTLS: + if (!HandleAnonTLSAuth(client)) return FALSE; + /* After the TLS session is established, sub auth types are expected. + * Note that all following reading/writing are through the TLS session from here. + */ + if (!ReadSupportedSecurityType(client, &subAuthScheme, TRUE)) return FALSE; + client->subAuthScheme = subAuthScheme; + + switch (subAuthScheme) { + + case rfbConnFailed: + ReadReason(client); + return FALSE; + + case rfbNoAuth: + rfbClientLog("No sub authentication needed\n"); + /* 3.8 and upwards sends a Security Result for rfbNoAuth */ + if ((client->major==3 && client->minor > 7) || client->major>3) + if (!rfbHandleAuthResult(client)) return FALSE; + break; + + case rfbVncAuth: + if (!HandleVncAuth(client)) return FALSE; + break; + + default: + rfbClientLog("Unknown sub authentication scheme from VNC server: %d\n", + (int)subAuthScheme); + return FALSE; + } + + break; + + case rfbVeNCrypt: + if (!HandleVeNCryptAuth(client)) return FALSE; + + switch (client->subAuthScheme) { + + case rfbVeNCryptTLSNone: + case rfbVeNCryptX509None: + rfbClientLog("No sub authentication needed\n"); + if (!rfbHandleAuthResult(client)) return FALSE; + break; + + case rfbVeNCryptTLSVNC: + case rfbVeNCryptX509VNC: + if (!HandleVncAuth(client)) return FALSE; + break; + + case rfbVeNCryptTLSPlain: + case rfbVeNCryptX509Plain: + if (!HandlePlainAuth(client)) return FALSE; + break; + + default: + rfbClientLog("Unknown sub authentication scheme from VNC server: %d\n", + client->subAuthScheme); + return FALSE; + } + + break; + + default: + rfbClientLog("Unknown authentication scheme from VNC server: %d\n", + (int)authScheme); + return FALSE; + } + + ci.shared = (client->appData.shareDesktop ? 1 : 0); + + if (!WriteToRFBServer(client, (char *)&ci, sz_rfbClientInitMsg)) return FALSE; + + if (!ReadFromRFBServer(client, (char *)&client->si, sz_rfbServerInitMsg)) return FALSE; + + client->si.framebufferWidth = rfbClientSwap16IfLE(client->si.framebufferWidth); + client->si.framebufferHeight = rfbClientSwap16IfLE(client->si.framebufferHeight); + client->si.format.redMax = rfbClientSwap16IfLE(client->si.format.redMax); + client->si.format.greenMax = rfbClientSwap16IfLE(client->si.format.greenMax); + client->si.format.blueMax = rfbClientSwap16IfLE(client->si.format.blueMax); + client->si.nameLength = rfbClientSwap32IfLE(client->si.nameLength); + + client->desktopName = malloc(client->si.nameLength + 1); + if (!client->desktopName) { + rfbClientLog("Error allocating memory for desktop name, %lu bytes\n", + (unsigned long)client->si.nameLength); + return FALSE; + } + + if (!ReadFromRFBServer(client, client->desktopName, client->si.nameLength)) return FALSE; + + client->desktopName[client->si.nameLength] = 0; + + rfbClientLog("Desktop name \"%s\"\n",client->desktopName); + + rfbClientLog("Connected to VNC server, using protocol version %d.%d\n", + client->major, client->minor); + + rfbClientLog("VNC server default format:\n"); + PrintPixelFormat(&client->si.format); + + return TRUE; +} + + +/* + * SetFormatAndEncodings. + */ + +rfbBool +SetFormatAndEncodings(rfbClient* client) +{ + rfbSetPixelFormatMsg spf; + char buf[sz_rfbSetEncodingsMsg + MAX_ENCODINGS * 4]; + + rfbSetEncodingsMsg *se = (rfbSetEncodingsMsg *)buf; + uint32_t *encs = (uint32_t *)(&buf[sz_rfbSetEncodingsMsg]); + int len = 0; + rfbBool requestCompressLevel = FALSE; + rfbBool requestQualityLevel = FALSE; + rfbBool requestLastRectEncoding = FALSE; + rfbClientProtocolExtension* e; + + if (!SupportsClient2Server(client, rfbSetPixelFormat)) return TRUE; + + spf.type = rfbSetPixelFormat; + spf.format = client->format; + spf.format.redMax = rfbClientSwap16IfLE(spf.format.redMax); + spf.format.greenMax = rfbClientSwap16IfLE(spf.format.greenMax); + spf.format.blueMax = rfbClientSwap16IfLE(spf.format.blueMax); + + if (!WriteToRFBServer(client, (char *)&spf, sz_rfbSetPixelFormatMsg)) + return FALSE; + + + if (!SupportsClient2Server(client, rfbSetEncodings)) return TRUE; + + se->type = rfbSetEncodings; + se->nEncodings = 0; + + if (client->appData.encodingsString) { + const char *encStr = client->appData.encodingsString; + int encStrLen; + do { + const char *nextEncStr = strchr(encStr, ' '); + if (nextEncStr) { + encStrLen = nextEncStr - encStr; + nextEncStr++; + } else { + encStrLen = strlen(encStr); + } + + if (strncasecmp(encStr,"raw",encStrLen) == 0) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingRaw); + } else if (strncasecmp(encStr,"copyrect",encStrLen) == 0) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingCopyRect); +#ifdef LIBVNCSERVER_HAVE_LIBZ +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + } else if (strncasecmp(encStr,"tight",encStrLen) == 0) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingTight); + requestLastRectEncoding = TRUE; + if (client->appData.compressLevel >= 0 && client->appData.compressLevel <= 9) + requestCompressLevel = TRUE; + if (client->appData.enableJPEG) + requestQualityLevel = TRUE; +#endif +#endif + } else if (strncasecmp(encStr,"hextile",encStrLen) == 0) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingHextile); +#ifdef LIBVNCSERVER_HAVE_LIBZ + } else if (strncasecmp(encStr,"zlib",encStrLen) == 0) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingZlib); + if (client->appData.compressLevel >= 0 && client->appData.compressLevel <= 9) + requestCompressLevel = TRUE; + } else if (strncasecmp(encStr,"zlibhex",encStrLen) == 0) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingZlibHex); + if (client->appData.compressLevel >= 0 && client->appData.compressLevel <= 9) + requestCompressLevel = TRUE; + } else if (strncasecmp(encStr,"zrle",encStrLen) == 0) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingZRLE); + } else if (strncasecmp(encStr,"zywrle",encStrLen) == 0) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingZYWRLE); + requestQualityLevel = TRUE; +#endif + } else if ((strncasecmp(encStr,"ultra",encStrLen) == 0) || (strncasecmp(encStr,"ultrazip",encStrLen) == 0)) { + /* There are 2 encodings used in 'ultra' */ + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingUltra); + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingUltraZip); + } else if (strncasecmp(encStr,"corre",encStrLen) == 0) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingCoRRE); + } else if (strncasecmp(encStr,"rre",encStrLen) == 0) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingRRE); + } else { + rfbClientLog("Unknown encoding '%.*s'\n",encStrLen,encStr); + } + + encStr = nextEncStr; + } while (encStr && se->nEncodings < MAX_ENCODINGS); + + if (se->nEncodings < MAX_ENCODINGS && requestCompressLevel) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(client->appData.compressLevel + + rfbEncodingCompressLevel0); + } + + if (se->nEncodings < MAX_ENCODINGS && requestQualityLevel) { + if (client->appData.qualityLevel < 0 || client->appData.qualityLevel > 9) + client->appData.qualityLevel = 5; + encs[se->nEncodings++] = rfbClientSwap32IfLE(client->appData.qualityLevel + + rfbEncodingQualityLevel0); + } + } + else { + if (SameMachine(client->sock)) { + /* TODO: + if (!tunnelSpecified) { + */ + rfbClientLog("Same machine: preferring raw encoding\n"); + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingRaw); + /* + } else { + rfbClientLog("Tunneling active: preferring tight encoding\n"); + } + */ + } + + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingCopyRect); +#ifdef LIBVNCSERVER_HAVE_LIBZ +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingTight); + requestLastRectEncoding = TRUE; +#endif +#endif + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingHextile); +#ifdef LIBVNCSERVER_HAVE_LIBZ + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingZlib); + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingZRLE); + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingZYWRLE); +#endif + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingUltra); + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingUltraZip); + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingCoRRE); + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingRRE); + + if (client->appData.compressLevel >= 0 && client->appData.compressLevel <= 9) { + encs[se->nEncodings++] = rfbClientSwap32IfLE(client->appData.compressLevel + + rfbEncodingCompressLevel0); + } else /* if (!tunnelSpecified) */ { + /* If -tunnel option was provided, we assume that server machine is + not in the local network so we use default compression level for + tight encoding instead of fast compression. Thus we are + requesting level 1 compression only if tunneling is not used. */ + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingCompressLevel1); + } + + if (client->appData.enableJPEG) { + if (client->appData.qualityLevel < 0 || client->appData.qualityLevel > 9) + client->appData.qualityLevel = 5; + encs[se->nEncodings++] = rfbClientSwap32IfLE(client->appData.qualityLevel + + rfbEncodingQualityLevel0); + } + } + + + + /* Remote Cursor Support (local to viewer) */ + if (client->appData.useRemoteCursor) { + if (se->nEncodings < MAX_ENCODINGS) + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingXCursor); + if (se->nEncodings < MAX_ENCODINGS) + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingRichCursor); + if (se->nEncodings < MAX_ENCODINGS) + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingPointerPos); + } + + /* Keyboard State Encodings */ + if (se->nEncodings < MAX_ENCODINGS) + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingKeyboardLedState); + + /* New Frame Buffer Size */ + if (se->nEncodings < MAX_ENCODINGS && client->canHandleNewFBSize) + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingNewFBSize); + + /* Last Rect */ + if (se->nEncodings < MAX_ENCODINGS && requestLastRectEncoding) + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingLastRect); + + /* Server Capabilities */ + if (se->nEncodings < MAX_ENCODINGS) + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingSupportedMessages); + if (se->nEncodings < MAX_ENCODINGS) + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingSupportedEncodings); + if (se->nEncodings < MAX_ENCODINGS) + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingServerIdentity); + + /* xvp */ + if (se->nEncodings < MAX_ENCODINGS) + encs[se->nEncodings++] = rfbClientSwap32IfLE(rfbEncodingXvp); + + /* client extensions */ + for(e = rfbClientExtensions; e; e = e->next) + if(e->encodings) { + int* enc; + for(enc = e->encodings; *enc; enc++) + encs[se->nEncodings++] = rfbClientSwap32IfLE(*enc); + } + + len = sz_rfbSetEncodingsMsg + se->nEncodings * 4; + + se->nEncodings = rfbClientSwap16IfLE(se->nEncodings); + + if (!WriteToRFBServer(client, buf, len)) return FALSE; + + return TRUE; +} + + +/* + * SendIncrementalFramebufferUpdateRequest. + */ + +rfbBool +SendIncrementalFramebufferUpdateRequest(rfbClient* client) +{ + return SendFramebufferUpdateRequest(client, + client->updateRect.x, client->updateRect.y, + client->updateRect.w, client->updateRect.h, TRUE); +} + + +/* + * SendFramebufferUpdateRequest. + */ + +rfbBool +SendFramebufferUpdateRequest(rfbClient* client, int x, int y, int w, int h, rfbBool incremental) +{ + rfbFramebufferUpdateRequestMsg fur; + + if (!SupportsClient2Server(client, rfbFramebufferUpdateRequest)) return TRUE; + + fur.type = rfbFramebufferUpdateRequest; + fur.incremental = incremental ? 1 : 0; + fur.x = rfbClientSwap16IfLE(x); + fur.y = rfbClientSwap16IfLE(y); + fur.w = rfbClientSwap16IfLE(w); + fur.h = rfbClientSwap16IfLE(h); + + if (!WriteToRFBServer(client, (char *)&fur, sz_rfbFramebufferUpdateRequestMsg)) + return FALSE; + + return TRUE; +} + + +/* + * SendScaleSetting. + */ +rfbBool +SendScaleSetting(rfbClient* client,int scaleSetting) +{ + rfbSetScaleMsg ssm; + + ssm.scale = scaleSetting; + ssm.pad = 0; + + /* favor UltraVNC SetScale if both are supported */ + if (SupportsClient2Server(client, rfbSetScale)) { + ssm.type = rfbSetScale; + if (!WriteToRFBServer(client, (char *)&ssm, sz_rfbSetScaleMsg)) + return FALSE; + } + + if (SupportsClient2Server(client, rfbPalmVNCSetScaleFactor)) { + ssm.type = rfbPalmVNCSetScaleFactor; + if (!WriteToRFBServer(client, (char *)&ssm, sz_rfbSetScaleMsg)) + return FALSE; + } + + return TRUE; +} + +/* + * TextChatFunctions (UltraVNC) + * Extremely bandwidth friendly method of communicating with a user + * (Think HelpDesk type applications) + */ + +rfbBool TextChatSend(rfbClient* client, char *text) +{ + rfbTextChatMsg chat; + int count = strlen(text); + + if (!SupportsClient2Server(client, rfbTextChat)) return TRUE; + chat.type = rfbTextChat; + chat.pad1 = 0; + chat.pad2 = 0; + chat.length = (uint32_t)count; + chat.length = rfbClientSwap32IfLE(chat.length); + + if (!WriteToRFBServer(client, (char *)&chat, sz_rfbTextChatMsg)) + return FALSE; + + if (count>0) { + if (!WriteToRFBServer(client, text, count)) + return FALSE; + } + return TRUE; +} + +rfbBool TextChatOpen(rfbClient* client) +{ + rfbTextChatMsg chat; + + if (!SupportsClient2Server(client, rfbTextChat)) return TRUE; + chat.type = rfbTextChat; + chat.pad1 = 0; + chat.pad2 = 0; + chat.length = rfbClientSwap32IfLE(rfbTextChatOpen); + return (WriteToRFBServer(client, (char *)&chat, sz_rfbTextChatMsg) ? TRUE : FALSE); +} + +rfbBool TextChatClose(rfbClient* client) +{ + rfbTextChatMsg chat; + if (!SupportsClient2Server(client, rfbTextChat)) return TRUE; + chat.type = rfbTextChat; + chat.pad1 = 0; + chat.pad2 = 0; + chat.length = rfbClientSwap32IfLE(rfbTextChatClose); + return (WriteToRFBServer(client, (char *)&chat, sz_rfbTextChatMsg) ? TRUE : FALSE); +} + +rfbBool TextChatFinish(rfbClient* client) +{ + rfbTextChatMsg chat; + if (!SupportsClient2Server(client, rfbTextChat)) return TRUE; + chat.type = rfbTextChat; + chat.pad1 = 0; + chat.pad2 = 0; + chat.length = rfbClientSwap32IfLE(rfbTextChatFinished); + return (WriteToRFBServer(client, (char *)&chat, sz_rfbTextChatMsg) ? TRUE : FALSE); +} + +/* + * UltraVNC Server Input Disable + * Apparently, the remote client can *prevent* the local user from interacting with the display + * I would think this is extremely helpful when used in a HelpDesk situation + */ +rfbBool PermitServerInput(rfbClient* client, int enabled) +{ + rfbSetServerInputMsg msg; + + if (!SupportsClient2Server(client, rfbSetServerInput)) return TRUE; + /* enabled==1, then server input from local keyboard is disabled */ + msg.type = rfbSetServerInput; + msg.status = (enabled ? 1 : 0); + msg.pad = 0; + return (WriteToRFBServer(client, (char *)&msg, sz_rfbSetServerInputMsg) ? TRUE : FALSE); +} + + +/* + * send xvp client message + * A client supporting the xvp extension sends this to request that the server initiate + * a clean shutdown, clean reboot or abrupt reset of the system whose framebuffer the + * client is displaying. + * + * only version 1 is defined in the protocol specs + * + * possible values for code are: + * rfbXvp_Shutdown + * rfbXvp_Reboot + * rfbXvp_Reset + */ + +rfbBool SendXvpMsg(rfbClient* client, uint8_t version, uint8_t code) +{ + rfbXvpMsg xvp; + + if (!SupportsClient2Server(client, rfbXvp)) return TRUE; + xvp.type = rfbXvp; + xvp.pad = 0; + xvp.version = version; + xvp.code = code; + + if (!WriteToRFBServer(client, (char *)&xvp, sz_rfbXvpMsg)) + return FALSE; + + return TRUE; +} + + +/* + * SendPointerEvent. + */ + +rfbBool +SendPointerEvent(rfbClient* client,int x, int y, int buttonMask) +{ + rfbPointerEventMsg pe; + + if (!SupportsClient2Server(client, rfbPointerEvent)) return TRUE; + + pe.type = rfbPointerEvent; + pe.buttonMask = buttonMask; + if (x < 0) x = 0; + if (y < 0) y = 0; + + pe.x = rfbClientSwap16IfLE(x); + pe.y = rfbClientSwap16IfLE(y); + return WriteToRFBServer(client, (char *)&pe, sz_rfbPointerEventMsg); +} + + +/* + * SendKeyEvent. + */ + +rfbBool +SendKeyEvent(rfbClient* client, uint32_t key, rfbBool down) +{ + rfbKeyEventMsg ke; + + if (!SupportsClient2Server(client, rfbKeyEvent)) return TRUE; + + ke.type = rfbKeyEvent; + ke.down = down ? 1 : 0; + ke.key = rfbClientSwap32IfLE(key); + return WriteToRFBServer(client, (char *)&ke, sz_rfbKeyEventMsg); +} + + +/* + * SendClientCutText. + */ + +rfbBool +SendClientCutText(rfbClient* client, char *str, int len) +{ + rfbClientCutTextMsg cct; + + if (!SupportsClient2Server(client, rfbClientCutText)) return TRUE; + + cct.type = rfbClientCutText; + cct.length = rfbClientSwap32IfLE(len); + return (WriteToRFBServer(client, (char *)&cct, sz_rfbClientCutTextMsg) && + WriteToRFBServer(client, str, len)); +} + + + +/* + * HandleRFBServerMessage. + */ + +rfbBool +HandleRFBServerMessage(rfbClient* client) +{ + rfbServerToClientMsg msg; + + if (client->serverPort==-1) + client->vncRec->readTimestamp = TRUE; + if (!ReadFromRFBServer(client, (char *)&msg, 1)) + return FALSE; + + switch (msg.type) { + + case rfbSetColourMapEntries: + { + /* TODO: + int i; + uint16_t rgb[3]; + XColor xc; + + if (!ReadFromRFBServer(client, ((char *)&msg) + 1, + sz_rfbSetColourMapEntriesMsg - 1)) + return FALSE; + + msg.scme.firstColour = rfbClientSwap16IfLE(msg.scme.firstColour); + msg.scme.nColours = rfbClientSwap16IfLE(msg.scme.nColours); + + for (i = 0; i < msg.scme.nColours; i++) { + if (!ReadFromRFBServer(client, (char *)rgb, 6)) + return FALSE; + xc.pixel = msg.scme.firstColour + i; + xc.red = rfbClientSwap16IfLE(rgb[0]); + xc.green = rfbClientSwap16IfLE(rgb[1]); + xc.blue = rfbClientSwap16IfLE(rgb[2]); + xc.flags = DoRed|DoGreen|DoBlue; + XStoreColor(dpy, cmap, &xc); + } + */ + + break; + } + + case rfbFramebufferUpdate: + { + rfbFramebufferUpdateRectHeader rect; + int linesToRead; + int bytesPerLine; + int i; + + if (!ReadFromRFBServer(client, ((char *)&msg.fu) + 1, + sz_rfbFramebufferUpdateMsg - 1)) + return FALSE; + + msg.fu.nRects = rfbClientSwap16IfLE(msg.fu.nRects); + + for (i = 0; i < msg.fu.nRects; i++) { + if (!ReadFromRFBServer(client, (char *)&rect, sz_rfbFramebufferUpdateRectHeader)) + return FALSE; + + rect.encoding = rfbClientSwap32IfLE(rect.encoding); + if (rect.encoding == rfbEncodingLastRect) + break; + + rect.r.x = rfbClientSwap16IfLE(rect.r.x); + rect.r.y = rfbClientSwap16IfLE(rect.r.y); + rect.r.w = rfbClientSwap16IfLE(rect.r.w); + rect.r.h = rfbClientSwap16IfLE(rect.r.h); + + + if (rect.encoding == rfbEncodingXCursor || + rect.encoding == rfbEncodingRichCursor) { + + if (!HandleCursorShape(client, + rect.r.x, rect.r.y, rect.r.w, rect.r.h, + rect.encoding)) { + return FALSE; + } + continue; + } + + if (rect.encoding == rfbEncodingPointerPos) { + if (!client->HandleCursorPos(client,rect.r.x, rect.r.y)) { + return FALSE; + } + continue; + } + + if (rect.encoding == rfbEncodingKeyboardLedState) { + /* OK! We have received a keyboard state message!!! */ + client->KeyboardLedStateEnabled = 1; + if (client->HandleKeyboardLedState!=NULL) + client->HandleKeyboardLedState(client, rect.r.x, 0); + /* stash it for the future */ + client->CurrentKeyboardLedState = rect.r.x; + continue; + } + + if (rect.encoding == rfbEncodingNewFBSize) { + client->width = rect.r.w; + client->height = rect.r.h; + client->updateRect.x = client->updateRect.y = 0; + client->updateRect.w = client->width; + client->updateRect.h = client->height; + client->MallocFrameBuffer(client); + SendFramebufferUpdateRequest(client, 0, 0, rect.r.w, rect.r.h, FALSE); + rfbClientLog("Got new framebuffer size: %dx%d\n", rect.r.w, rect.r.h); + continue; + } + + /* rect.r.w=byte count */ + if (rect.encoding == rfbEncodingSupportedMessages) { + int loop; + if (!ReadFromRFBServer(client, (char *)&client->supportedMessages, sz_rfbSupportedMessages)) + return FALSE; + + /* msgs is two sets of bit flags of supported messages client2server[] and server2client[] */ + /* currently ignored by this library */ + + rfbClientLog("client2server supported messages (bit flags)\n"); + for (loop=0;loop<32;loop+=8) + rfbClientLog("%02X: %04x %04x %04x %04x - %04x %04x %04x %04x\n", loop, + client->supportedMessages.client2server[loop], client->supportedMessages.client2server[loop+1], + client->supportedMessages.client2server[loop+2], client->supportedMessages.client2server[loop+3], + client->supportedMessages.client2server[loop+4], client->supportedMessages.client2server[loop+5], + client->supportedMessages.client2server[loop+6], client->supportedMessages.client2server[loop+7]); + + rfbClientLog("server2client supported messages (bit flags)\n"); + for (loop=0;loop<32;loop+=8) + rfbClientLog("%02X: %04x %04x %04x %04x - %04x %04x %04x %04x\n", loop, + client->supportedMessages.server2client[loop], client->supportedMessages.server2client[loop+1], + client->supportedMessages.server2client[loop+2], client->supportedMessages.server2client[loop+3], + client->supportedMessages.server2client[loop+4], client->supportedMessages.server2client[loop+5], + client->supportedMessages.server2client[loop+6], client->supportedMessages.server2client[loop+7]); + continue; + } + + /* rect.r.w=byte count, rect.r.h=# of encodings */ + if (rect.encoding == rfbEncodingSupportedEncodings) { + char *buffer; + buffer = malloc(rect.r.w); + if (!ReadFromRFBServer(client, buffer, rect.r.w)) + { + free(buffer); + return FALSE; + } + + /* buffer now contains rect.r.h # of uint32_t encodings that the server supports */ + /* currently ignored by this library */ + free(buffer); + continue; + } + + /* rect.r.w=byte count */ + if (rect.encoding == rfbEncodingServerIdentity) { + char *buffer; + buffer = malloc(rect.r.w+1); + if (!ReadFromRFBServer(client, buffer, rect.r.w)) + { + free(buffer); + return FALSE; + } + buffer[rect.r.w]=0; /* null terminate, just in case */ + rfbClientLog("Connected to Server \"%s\"\n", buffer); + free(buffer); + continue; + } + + /* rfbEncodingUltraZip is a collection of subrects. x = # of subrects, and h is always 0 */ + if (rect.encoding != rfbEncodingUltraZip) + { + if ((rect.r.x + rect.r.w > client->width) || + (rect.r.y + rect.r.h > client->height)) + { + rfbClientLog("Rect too large: %dx%d at (%d, %d)\n", + rect.r.w, rect.r.h, rect.r.x, rect.r.y); + return FALSE; + } + + /* UltraVNC with scaling, will send rectangles with a zero W or H + * + if ((rect.encoding != rfbEncodingTight) && + (rect.r.h * rect.r.w == 0)) + { + rfbClientLog("Zero size rect - ignoring (encoding=%d (0x%08x) %dx, %dy, %dw, %dh)\n", rect.encoding, rect.encoding, rect.r.x, rect.r.y, rect.r.w, rect.r.h); + continue; + } + */ + + /* If RichCursor encoding is used, we should prevent collisions + between framebuffer updates and cursor drawing operations. */ + client->SoftCursorLockArea(client, rect.r.x, rect.r.y, rect.r.w, rect.r.h); + } + + switch (rect.encoding) { + + case rfbEncodingRaw: { + int y=rect.r.y, h=rect.r.h; + + bytesPerLine = rect.r.w * client->format.bitsPerPixel / 8; + linesToRead = RFB_BUFFER_SIZE / bytesPerLine; + + while (h > 0) { + if (linesToRead > h) + linesToRead = h; + + if (!ReadFromRFBServer(client, client->buffer,bytesPerLine * linesToRead)) + return FALSE; + + CopyRectangle(client, (uint8_t *)client->buffer, + rect.r.x, y, rect.r.w,linesToRead); + + h -= linesToRead; + y += linesToRead; + + } + } break; + + case rfbEncodingCopyRect: + { + rfbCopyRect cr; + + if (!ReadFromRFBServer(client, (char *)&cr, sz_rfbCopyRect)) + return FALSE; + + cr.srcX = rfbClientSwap16IfLE(cr.srcX); + cr.srcY = rfbClientSwap16IfLE(cr.srcY); + + /* If RichCursor encoding is used, we should extend our + "cursor lock area" (previously set to destination + rectangle) to the source rectangle as well. */ + client->SoftCursorLockArea(client, + cr.srcX, cr.srcY, rect.r.w, rect.r.h); + + if (client->GotCopyRect != NULL) { + client->GotCopyRect(client, cr.srcX, cr.srcY, rect.r.w, rect.r.h, + rect.r.x, rect.r.y); + } else + CopyRectangleFromRectangle(client, + cr.srcX, cr.srcY, rect.r.w, rect.r.h, + rect.r.x, rect.r.y); + + break; + } + + case rfbEncodingRRE: + { + switch (client->format.bitsPerPixel) { + case 8: + if (!HandleRRE8(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 16: + if (!HandleRRE16(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 32: + if (!HandleRRE32(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + } + break; + } + + case rfbEncodingCoRRE: + { + switch (client->format.bitsPerPixel) { + case 8: + if (!HandleCoRRE8(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 16: + if (!HandleCoRRE16(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 32: + if (!HandleCoRRE32(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + } + break; + } + + case rfbEncodingHextile: + { + switch (client->format.bitsPerPixel) { + case 8: + if (!HandleHextile8(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 16: + if (!HandleHextile16(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 32: + if (!HandleHextile32(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + } + break; + } + + case rfbEncodingUltra: + { + switch (client->format.bitsPerPixel) { + case 8: + if (!HandleUltra8(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 16: + if (!HandleUltra16(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 32: + if (!HandleUltra32(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + } + break; + } + case rfbEncodingUltraZip: + { + switch (client->format.bitsPerPixel) { + case 8: + if (!HandleUltraZip8(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 16: + if (!HandleUltraZip16(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 32: + if (!HandleUltraZip32(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + } + break; + } + +#ifdef LIBVNCSERVER_HAVE_LIBZ + case rfbEncodingZlib: + { + switch (client->format.bitsPerPixel) { + case 8: + if (!HandleZlib8(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 16: + if (!HandleZlib16(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 32: + if (!HandleZlib32(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + } + break; + } + +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + case rfbEncodingTight: + { + switch (client->format.bitsPerPixel) { + case 8: + if (!HandleTight8(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 16: + if (!HandleTight16(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 32: + if (!HandleTight32(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + } + break; + } +#endif + case rfbEncodingZRLE: + /* Fail safe for ZYWRLE unsupport VNC server. */ + client->appData.qualityLevel = 9; + /* fall through */ + case rfbEncodingZYWRLE: + { + switch (client->format.bitsPerPixel) { + case 8: + if (!HandleZRLE8(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + case 16: + if (client->si.format.greenMax > 0x1F) { + if (!HandleZRLE16(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + } else { + if (!HandleZRLE15(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + } + break; + case 32: + { + uint32_t maxColor=(client->format.redMax<format.redShift)| + (client->format.greenMax<format.greenShift)| + (client->format.blueMax<format.blueShift); + if ((client->format.bigEndian && (maxColor&0xff)==0) || + (!client->format.bigEndian && (maxColor&0xff000000)==0)) { + if (!HandleZRLE24(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + } else if (!client->format.bigEndian && (maxColor&0xff)==0) { + if (!HandleZRLE24Up(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + } else if (client->format.bigEndian && (maxColor&0xff000000)==0) { + if (!HandleZRLE24Down(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + } else if (!HandleZRLE32(client, rect.r.x,rect.r.y,rect.r.w,rect.r.h)) + return FALSE; + break; + } + } + break; + } + +#endif + + default: + { + rfbBool handled = FALSE; + rfbClientProtocolExtension* e; + + for(e = rfbClientExtensions; !handled && e; e = e->next) + if(e->handleEncoding && e->handleEncoding(client, &rect)) + handled = TRUE; + + if(!handled) { + rfbClientLog("Unknown rect encoding %d\n", + (int)rect.encoding); + return FALSE; + } + } + } + + /* Now we may discard "soft cursor locks". */ + client->SoftCursorUnlockScreen(client); + + client->GotFrameBufferUpdate(client, rect.r.x, rect.r.y, rect.r.w, rect.r.h); + } + + if (!SendIncrementalFramebufferUpdateRequest(client)) + return FALSE; + + if (client->FinishedFrameBufferUpdate) + client->FinishedFrameBufferUpdate(client); + + break; + } + + case rfbBell: + { + client->Bell(client); + + break; + } + + case rfbServerCutText: + { + char *buffer; + + if (!ReadFromRFBServer(client, ((char *)&msg) + 1, + sz_rfbServerCutTextMsg - 1)) + return FALSE; + + msg.sct.length = rfbClientSwap32IfLE(msg.sct.length); + + buffer = malloc(msg.sct.length+1); + + if (!ReadFromRFBServer(client, buffer, msg.sct.length)) + return FALSE; + + buffer[msg.sct.length] = 0; + + if (client->GotXCutText) + client->GotXCutText(client, buffer, msg.sct.length); + + free(buffer); + + break; + } + + case rfbTextChat: + { + char *buffer=NULL; + if (!ReadFromRFBServer(client, ((char *)&msg) + 1, + sz_rfbTextChatMsg- 1)) + return FALSE; + msg.tc.length = rfbClientSwap32IfLE(msg.sct.length); + switch(msg.tc.length) { + case rfbTextChatOpen: + rfbClientLog("Received TextChat Open\n"); + if (client->HandleTextChat!=NULL) + client->HandleTextChat(client, (int)rfbTextChatOpen, NULL); + break; + case rfbTextChatClose: + rfbClientLog("Received TextChat Close\n"); + if (client->HandleTextChat!=NULL) + client->HandleTextChat(client, (int)rfbTextChatClose, NULL); + break; + case rfbTextChatFinished: + rfbClientLog("Received TextChat Finished\n"); + if (client->HandleTextChat!=NULL) + client->HandleTextChat(client, (int)rfbTextChatFinished, NULL); + break; + default: + buffer=malloc(msg.tc.length+1); + if (!ReadFromRFBServer(client, buffer, msg.tc.length)) + { + free(buffer); + return FALSE; + } + /* Null Terminate */ + buffer[msg.tc.length]=0; + rfbClientLog("Received TextChat \"%s\"\n", buffer); + if (client->HandleTextChat!=NULL) + client->HandleTextChat(client, (int)msg.tc.length, buffer); + free(buffer); + break; + } + break; + } + + case rfbXvp: + { + if (!ReadFromRFBServer(client, ((char *)&msg) + 1, + sz_rfbXvpMsg -1)) + return FALSE; + + SetClient2Server(client, rfbXvp); + /* technically, we only care what we can *send* to the server + * but, we set Server2Client Just in case it ever becomes useful + */ + SetServer2Client(client, rfbXvp); + + if(client->HandleXvpMsg) + client->HandleXvpMsg(client, msg.xvp.version, msg.xvp.code); + + break; + } + + case rfbResizeFrameBuffer: + { + if (!ReadFromRFBServer(client, ((char *)&msg) + 1, + sz_rfbResizeFrameBufferMsg -1)) + return FALSE; + client->width = rfbClientSwap16IfLE(msg.rsfb.framebufferWidth); + client->height = rfbClientSwap16IfLE(msg.rsfb.framebufferHeigth); + client->updateRect.x = client->updateRect.y = 0; + client->updateRect.w = client->width; + client->updateRect.h = client->height; + client->MallocFrameBuffer(client); + SendFramebufferUpdateRequest(client, 0, 0, client->width, client->height, FALSE); + rfbClientLog("Got new framebuffer size: %dx%d\n", client->width, client->height); + break; + } + + case rfbPalmVNCReSizeFrameBuffer: + { + if (!ReadFromRFBServer(client, ((char *)&msg) + 1, + sz_rfbPalmVNCReSizeFrameBufferMsg -1)) + return FALSE; + client->width = rfbClientSwap16IfLE(msg.prsfb.buffer_w); + client->height = rfbClientSwap16IfLE(msg.prsfb.buffer_h); + client->updateRect.x = client->updateRect.y = 0; + client->updateRect.w = client->width; + client->updateRect.h = client->height; + client->MallocFrameBuffer(client); + SendFramebufferUpdateRequest(client, 0, 0, client->width, client->height, FALSE); + rfbClientLog("Got new framebuffer size: %dx%d\n", client->width, client->height); + break; + } + + default: + { + rfbBool handled = FALSE; + rfbClientProtocolExtension* e; + + for(e = rfbClientExtensions; !handled && e; e = e->next) + if(e->handleMessage && e->handleMessage(client, &msg)) + handled = TRUE; + + if(!handled) { + char buffer[256]; + rfbClientLog("Unknown message type %d from VNC server\n",msg.type); + ReadFromRFBServer(client, buffer, 256); + return FALSE; + } + } + } + + return TRUE; +} + + +#define GET_PIXEL8(pix, ptr) ((pix) = *(ptr)++) + +#define GET_PIXEL16(pix, ptr) (((uint8_t*)&(pix))[0] = *(ptr)++, \ + ((uint8_t*)&(pix))[1] = *(ptr)++) + +#define GET_PIXEL32(pix, ptr) (((uint8_t*)&(pix))[0] = *(ptr)++, \ + ((uint8_t*)&(pix))[1] = *(ptr)++, \ + ((uint8_t*)&(pix))[2] = *(ptr)++, \ + ((uint8_t*)&(pix))[3] = *(ptr)++) + +/* CONCAT2 concatenates its two arguments. CONCAT2E does the same but also + expands its arguments if they are macros */ + +#define CONCAT2(a,b) a##b +#define CONCAT2E(a,b) CONCAT2(a,b) +#define CONCAT3(a,b,c) a##b##c +#define CONCAT3E(a,b,c) CONCAT3(a,b,c) + +#define BPP 8 +#include "rre.c" +#include "corre.c" +#include "hextile.c" +#include "ultra.c" +#include "zlib.c" +#include "tight.c" +#include "zrle.c" +#undef BPP +#define BPP 16 +#include "rre.c" +#include "corre.c" +#include "hextile.c" +#include "ultra.c" +#include "zlib.c" +#include "tight.c" +#include "zrle.c" +#define REALBPP 15 +#include "zrle.c" +#undef BPP +#define BPP 32 +#include "rre.c" +#include "corre.c" +#include "hextile.c" +#include "ultra.c" +#include "zlib.c" +#include "tight.c" +#include "zrle.c" +#define REALBPP 24 +#include "zrle.c" +#define REALBPP 24 +#define UNCOMP 8 +#include "zrle.c" +#define REALBPP 24 +#define UNCOMP -8 +#include "zrle.c" +#undef BPP + + +/* + * PrintPixelFormat. + */ + +void +PrintPixelFormat(rfbPixelFormat *format) +{ + if (format->bitsPerPixel == 1) { + rfbClientLog(" Single bit per pixel.\n"); + rfbClientLog( + " %s significant bit in each byte is leftmost on the screen.\n", + (format->bigEndian ? "Most" : "Least")); + } else { + rfbClientLog(" %d bits per pixel.\n",format->bitsPerPixel); + if (format->bitsPerPixel != 8) { + rfbClientLog(" %s significant byte first in each pixel.\n", + (format->bigEndian ? "Most" : "Least")); + } + if (format->trueColour) { + rfbClientLog(" TRUE colour: max red %d green %d blue %d" + ", shift red %d green %d blue %d\n", + format->redMax, format->greenMax, format->blueMax, + format->redShift, format->greenShift, format->blueShift); + } else { + rfbClientLog(" Colour map (not true colour).\n"); + } + } +} + +/* avoid name clashes with LibVNCServer */ + +#define rfbEncryptBytes rfbClientEncryptBytes +#define rfbEncryptBytes2 rfbClientEncryptBytes2 +#define rfbDes rfbClientDes +#define rfbDesKey rfbClientDesKey +#define rfbUseKey rfbClientUseKey +#define rfbCPKey rfbClientCPKey + +#include "vncauth.c" +#include "d3des.c" diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/rre.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/rre.c new file mode 100644 index 0000000..94158c9 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/rre.c @@ -0,0 +1,68 @@ +/* + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * rre.c - handle RRE encoding. + * + * This file shouldn't be compiled directly. It is included multiple times by + * rfbproto.c, each time with a different definition of the macro BPP. For + * each value of BPP, this file defines a function which handles an RRE + * encoded rectangle with BPP bits per pixel. + */ + +#define HandleRREBPP CONCAT2E(HandleRRE,BPP) +#define CARDBPP CONCAT3E(uint,BPP,_t) + +static rfbBool +HandleRREBPP (rfbClient* client, int rx, int ry, int rw, int rh) +{ + rfbRREHeader hdr; + int i; + CARDBPP pix; + rfbRectangle subrect; + + if (!ReadFromRFBServer(client, (char *)&hdr, sz_rfbRREHeader)) + return FALSE; + + hdr.nSubrects = rfbClientSwap32IfLE(hdr.nSubrects); + + if (!ReadFromRFBServer(client, (char *)&pix, sizeof(pix))) + return FALSE; + + FillRectangle(client, rx, ry, rw, rh, pix); + + for (i = 0; i < hdr.nSubrects; i++) { + if (!ReadFromRFBServer(client, (char *)&pix, sizeof(pix))) + return FALSE; + + if (!ReadFromRFBServer(client, (char *)&subrect, sz_rfbRectangle)) + return FALSE; + + subrect.x = rfbClientSwap16IfLE(subrect.x); + subrect.y = rfbClientSwap16IfLE(subrect.y); + subrect.w = rfbClientSwap16IfLE(subrect.w); + subrect.h = rfbClientSwap16IfLE(subrect.h); + + FillRectangle(client, rx+subrect.x, ry+subrect.y, subrect.w, subrect.h, pix); + } + + return TRUE; +} + +#undef CARDBPP diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/sockets.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/sockets.c new file mode 100644 index 0000000..76441f9 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/sockets.c @@ -0,0 +1,813 @@ +/* + * Copyright (C) 2011-2012 Christian Beier + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * sockets.c - functions to deal with sockets. + */ + +#ifdef __STRICT_ANSI__ +#define _BSD_SOURCE +#endif +#include +#include +#include +#include +#include +#ifdef WIN32 +#undef SOCKET +#include +#define EWOULDBLOCK WSAEWOULDBLOCK +#define close closesocket +#define read(sock,buf,len) recv(sock,buf,len,0) +#define write(sock,buf,len) send(sock,buf,len,0) +#define socklen_t int +#ifdef LIBVNCSERVER_HAVE_WS2TCPIP_H +#undef socklen_t +#include +#endif +#else +#include +#include +#include +#include +#include +#include +#endif +#include "tls.h" + +void PrintInHex(char *buf, int len); + +rfbBool errorMessageOnReadFailure = TRUE; + +/* + * ReadFromRFBServer is called whenever we want to read some data from the RFB + * server. It is non-trivial for two reasons: + * + * 1. For efficiency it performs some intelligent buffering, avoiding invoking + * the read() system call too often. For small chunks of data, it simply + * copies the data out of an internal buffer. For large amounts of data it + * reads directly into the buffer provided by the caller. + * + * 2. Whenever read() would block, it invokes the Xt event dispatching + * mechanism to process X events. In fact, this is the only place these + * events are processed, as there is no XtAppMainLoop in the program. + */ + +rfbBool +ReadFromRFBServer(rfbClient* client, char *out, unsigned int n) +{ +#undef DEBUG_READ_EXACT +#ifdef DEBUG_READ_EXACT + char* oout=out; + int nn=n; + rfbClientLog("ReadFromRFBServer %d bytes\n",n); +#endif + if (client->serverPort==-1) { + /* vncrec playing */ + rfbVNCRec* rec = client->vncRec; + struct timeval tv; + + if (rec->readTimestamp) { + rec->readTimestamp = FALSE; + if (!fread(&tv,sizeof(struct timeval),1,rec->file)) + return FALSE; + + tv.tv_sec = rfbClientSwap32IfLE (tv.tv_sec); + tv.tv_usec = rfbClientSwap32IfLE (tv.tv_usec); + + if (rec->tv.tv_sec!=0 && !rec->doNotSleep) { + struct timeval diff; + diff.tv_sec = tv.tv_sec - rec->tv.tv_sec; + diff.tv_usec = tv.tv_usec - rec->tv.tv_usec; + if(diff.tv_usec<0) { + diff.tv_sec--; + diff.tv_usec+=1000000; + } +#ifndef __MINGW32__ + sleep (diff.tv_sec); + usleep (diff.tv_usec); +#else + Sleep (diff.tv_sec * 1000 + diff.tv_usec/1000); +#endif + } + + rec->tv=tv; + } + + return (fread(out,1,n,rec->file)<0?FALSE:TRUE); + } + + if (n <= client->buffered) { + memcpy(out, client->bufoutptr, n); + client->bufoutptr += n; + client->buffered -= n; +#ifdef DEBUG_READ_EXACT + goto hexdump; +#endif + return TRUE; + } + + memcpy(out, client->bufoutptr, client->buffered); + + out += client->buffered; + n -= client->buffered; + + client->bufoutptr = client->buf; + client->buffered = 0; + + if (n <= RFB_BUF_SIZE) { + + while (client->buffered < n) { + int i; + if (client->tlsSession) { + i = ReadFromTLS(client, client->buf + client->buffered, RFB_BUF_SIZE - client->buffered); + } else { + i = read(client->sock, client->buf + client->buffered, RFB_BUF_SIZE - client->buffered); + } + if (i <= 0) { + if (i < 0) { +#ifdef WIN32 + errno=WSAGetLastError(); +#endif + if (errno == EWOULDBLOCK || errno == EAGAIN) { + /* TODO: + ProcessXtEvents(); + */ + WaitForMessage(client, 100000); + i = 0; + } else { + rfbClientErr("read (%d: %s)\n",errno,strerror(errno)); + return FALSE; + } + } else { + if (errorMessageOnReadFailure) { + rfbClientLog("VNC server closed connection\n"); + } + return FALSE; + } + } + client->buffered += i; + } + + memcpy(out, client->bufoutptr, n); + client->bufoutptr += n; + client->buffered -= n; + + } else { + + while (n > 0) { + int i; + if (client->tlsSession) { + i = ReadFromTLS(client, out, n); + } else { + i = read(client->sock, out, n); + } + + if (i <= 0) { + if (i < 0) { +#ifdef WIN32 + errno=WSAGetLastError(); +#endif + if (errno == EWOULDBLOCK || errno == EAGAIN) { + /* TODO: + ProcessXtEvents(); + */ + WaitForMessage(client, 100000); + i = 0; + } else { + rfbClientErr("read (%s)\n",strerror(errno)); + return FALSE; + } + } else { + if (errorMessageOnReadFailure) { + rfbClientLog("VNC server closed connection\n"); + } + return FALSE; + } + } + out += i; + n -= i; + } + } + +#ifdef DEBUG_READ_EXACT +hexdump: + { int ii; + for(ii=0;iiserverPort==-1) + return TRUE; /* vncrec playing */ + + if (client->tlsSession) { + /* WriteToTLS() will guarantee either everything is written, or error/eof returns */ + i = WriteToTLS(client, buf, n); + if (i <= 0) return FALSE; + + return TRUE; + } + + while (i < n) { + j = write(client->sock, buf + i, (n - i)); + if (j <= 0) { + if (j < 0) { +#ifdef WIN32 + errno=WSAGetLastError(); +#endif + if (errno == EWOULDBLOCK || +#ifdef LIBVNCSERVER_ENOENT_WORKAROUND + errno == ENOENT || +#endif + errno == EAGAIN) { + FD_ZERO(&fds); + FD_SET(client->sock,&fds); + + if (select(client->sock+1, NULL, &fds, NULL, NULL) <= 0) { + rfbClientErr("select\n"); + return FALSE; + } + j = 0; + } else { + rfbClientErr("write\n"); + return FALSE; + } + } else { + rfbClientLog("write failed\n"); + return FALSE; + } + } + i += j; + } + return TRUE; +} + + + +static int initSockets() { +#ifdef WIN32 + WSADATA trash; + static rfbBool WSAinitted=FALSE; + if(!WSAinitted) { + int i=WSAStartup(MAKEWORD(2,0),&trash); + if(i!=0) { + rfbClientErr("Couldn't init Windows Sockets\n"); + return 0; + } + WSAinitted=TRUE; + } +#endif + return 1; +} + +/* + * ConnectToTcpAddr connects to the given TCP port. + */ + +int +ConnectClientToTcpAddr(unsigned int host, int port) +{ + int sock; + struct sockaddr_in addr; + int one = 1; + + if (!initSockets()) + return -1; + + addr.sin_family = AF_INET; + addr.sin_port = htons(port); + addr.sin_addr.s_addr = host; + + sock = socket(AF_INET, SOCK_STREAM, 0); + if (sock < 0) { +#ifdef WIN32 + errno=WSAGetLastError(); +#endif + rfbClientErr("ConnectToTcpAddr: socket (%s)\n",strerror(errno)); + return -1; + } + + if (connect(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) { + rfbClientErr("ConnectToTcpAddr: connect\n"); + close(sock); + return -1; + } + + if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, + (char *)&one, sizeof(one)) < 0) { + rfbClientErr("ConnectToTcpAddr: setsockopt\n"); + close(sock); + return -1; + } + + return sock; +} + +int +ConnectClientToTcpAddr6(const char *hostname, int port) +{ +#ifdef LIBVNCSERVER_IPv6 + int sock; + int n; + struct addrinfo hints, *res, *ressave; + char port_s[10]; + int one = 1; + + if (!initSockets()) + return -1; + + snprintf(port_s, 10, "%d", port); + memset(&hints, 0, sizeof(struct addrinfo)); + hints.ai_family = AF_UNSPEC; + hints.ai_socktype = SOCK_STREAM; + if ((n = getaddrinfo(hostname, port_s, &hints, &res))) + { + rfbClientErr("ConnectClientToTcpAddr6: getaddrinfo (%s)\n", gai_strerror(n)); + return -1; + } + + ressave = res; + sock = -1; + while (res) + { + sock = socket(res->ai_family, res->ai_socktype, res->ai_protocol); + if (sock >= 0) + { + if (connect(sock, res->ai_addr, res->ai_addrlen) == 0) + break; + close(sock); + sock = -1; + } + res = res->ai_next; + } + freeaddrinfo(ressave); + + if (sock == -1) + { + rfbClientErr("ConnectClientToTcpAddr6: connect\n"); + return -1; + } + + if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, + (char *)&one, sizeof(one)) < 0) { + rfbClientErr("ConnectToTcpAddr: setsockopt\n"); + close(sock); + return -1; + } + + return sock; + +#else + + rfbClientErr("ConnectClientToTcpAddr6: IPv6 disabled\n"); + return -1; + +#endif +} + +int +ConnectClientToUnixSock(const char *sockFile) +{ +#ifdef WIN32 + rfbClientErr("Windows doesn't support UNIX sockets\n"); + return -1; +#else + int sock; + struct sockaddr_un addr; + addr.sun_family = AF_UNIX; + strcpy(addr.sun_path, sockFile); + + sock = socket(AF_UNIX, SOCK_STREAM, 0); + if (sock < 0) { + rfbClientErr("ConnectToUnixSock: socket (%s)\n",strerror(errno)); + return -1; + } + + if (connect(sock, (struct sockaddr *)&addr, sizeof(addr.sun_family) + strlen(addr.sun_path)) < 0) { + rfbClientErr("ConnectToUnixSock: connect\n"); + close(sock); + return -1; + } + + return sock; +#endif +} + + + +/* + * FindFreeTcpPort tries to find unused TCP port in the range + * (TUNNEL_PORT_OFFSET, TUNNEL_PORT_OFFSET + 99]. Returns 0 on failure. + */ + +int +FindFreeTcpPort(void) +{ + int sock, port; + struct sockaddr_in addr; + + addr.sin_family = AF_INET; + addr.sin_addr.s_addr = htonl(INADDR_ANY); + + if (!initSockets()) + return -1; + + sock = socket(AF_INET, SOCK_STREAM, 0); + if (sock < 0) { + rfbClientErr(": FindFreeTcpPort: socket\n"); + return 0; + } + + for (port = TUNNEL_PORT_OFFSET + 99; port > TUNNEL_PORT_OFFSET; port--) { + addr.sin_port = htons((unsigned short)port); + if (bind(sock, (struct sockaddr *)&addr, sizeof(addr)) == 0) { + close(sock); + return port; + } + } + + close(sock); + return 0; +} + + +/* + * ListenAtTcpPort starts listening at the given TCP port. + */ + +int +ListenAtTcpPort(int port) +{ + return ListenAtTcpPortAndAddress(port, NULL); +} + + + +/* + * ListenAtTcpPortAndAddress starts listening at the given TCP port on + * the given IP address + */ + +int +ListenAtTcpPortAndAddress(int port, const char *address) +{ + int sock; + int one = 1; +#ifndef LIBVNCSERVER_IPv6 + struct sockaddr_in addr; + + addr.sin_family = AF_INET; + addr.sin_port = htons(port); + if (address) { + addr.sin_addr.s_addr = inet_addr(address); + } else { + addr.sin_addr.s_addr = htonl(INADDR_ANY); + } + + if (!initSockets()) + return -1; + + sock = socket(AF_INET, SOCK_STREAM, 0); + if (sock < 0) { + rfbClientErr("ListenAtTcpPort: socket\n"); + return -1; + } + + if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, + (const char *)&one, sizeof(one)) < 0) { + rfbClientErr("ListenAtTcpPort: setsockopt\n"); + close(sock); + return -1; + } + + if (bind(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) { + rfbClientErr("ListenAtTcpPort: bind\n"); + close(sock); + return -1; + } + +#else + int rv; + struct addrinfo hints, *servinfo, *p; + char port_str[8]; + + snprintf(port_str, 8, "%d", port); + + memset(&hints, 0, sizeof(hints)); + hints.ai_family = AF_UNSPEC; + hints.ai_socktype = SOCK_STREAM; + hints.ai_flags = AI_PASSIVE; /* fill in wildcard address if address == NULL */ + + if (!initSockets()) + return -1; + + if ((rv = getaddrinfo(address, port_str, &hints, &servinfo)) != 0) { + rfbClientErr("ListenAtTcpPortAndAddress: error in getaddrinfo: %s\n", gai_strerror(rv)); + return -1; + } + + /* loop through all the results and bind to the first we can */ + for(p = servinfo; p != NULL; p = p->ai_next) { + if ((sock = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) < 0) { + continue; + } + +#ifdef IPV6_V6ONLY + /* we have seperate IPv4 and IPv6 sockets since some OS's do not support dual binding */ + if (p->ai_family == AF_INET6 && setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY, (char *)&one, sizeof(one)) < 0) { + rfbClientErr("ListenAtTcpPortAndAddress: error in setsockopt IPV6_V6ONLY: %s\n", strerror(errno)); + close(sock); + freeaddrinfo(servinfo); + return -1; + } +#endif + + if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (char *)&one, sizeof(one)) < 0) { + rfbClientErr("ListenAtTcpPortAndAddress: error in setsockopt SO_REUSEADDR: %s\n", strerror(errno)); + close(sock); + freeaddrinfo(servinfo); + return -1; + } + + if (bind(sock, p->ai_addr, p->ai_addrlen) < 0) { + close(sock); + continue; + } + + break; + } + + if (p == NULL) { + rfbClientErr("ListenAtTcpPortAndAddress: error in bind: %s\n", strerror(errno)); + return -1; + } + + /* all done with this structure now */ + freeaddrinfo(servinfo); +#endif + + if (listen(sock, 5) < 0) { + rfbClientErr("ListenAtTcpPort: listen\n"); + close(sock); + return -1; + } + + return sock; +} + + +/* + * AcceptTcpConnection accepts a TCP connection. + */ + +int +AcceptTcpConnection(int listenSock) +{ + int sock; + struct sockaddr_in addr; + socklen_t addrlen = sizeof(addr); + int one = 1; + + sock = accept(listenSock, (struct sockaddr *) &addr, &addrlen); + if (sock < 0) { + rfbClientErr("AcceptTcpConnection: accept\n"); + return -1; + } + + if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, + (char *)&one, sizeof(one)) < 0) { + rfbClientErr("AcceptTcpConnection: setsockopt\n"); + close(sock); + return -1; + } + + return sock; +} + + +/* + * SetNonBlocking sets a socket into non-blocking mode. + */ + +rfbBool +SetNonBlocking(int sock) +{ +#ifdef WIN32 + unsigned long block=1; + if(ioctlsocket(sock, FIONBIO, &block) == SOCKET_ERROR) { + errno=WSAGetLastError(); +#else + int flags = fcntl(sock, F_GETFL); + if(flags < 0 || fcntl(sock, F_SETFL, flags | O_NONBLOCK) < 0) { +#endif + rfbClientErr("Setting socket to non-blocking failed: %s\n",strerror(errno)); + return FALSE; + } + return TRUE; +} + + + +/* + * SetDSCP sets a socket's IP QoS parameters aka Differentiated Services Code Point field + */ + +rfbBool +SetDSCP(int sock, int dscp) +{ +#ifdef WIN32 + rfbClientErr("Setting of QoS IP DSCP not implemented for Windows\n"); + return TRUE; +#else + int level, cmd; + struct sockaddr addr; + socklen_t addrlen = sizeof(addr); + + if(getsockname(sock, &addr, &addrlen) != 0) { + rfbClientErr("Setting socket QoS failed while getting socket address: %s\n",strerror(errno)); + return FALSE; + } + + switch(addr.sa_family) + { +#if defined LIBVNCSERVER_IPv6 && defined IPV6_TCLASS + case AF_INET6: + level = IPPROTO_IPV6; + cmd = IPV6_TCLASS; + break; +#endif + case AF_INET: + level = IPPROTO_IP; + cmd = IP_TOS; + break; + default: + rfbClientErr("Setting socket QoS failed: Not bound to IP address"); + return FALSE; + } + + if(setsockopt(sock, level, cmd, (void*)&dscp, sizeof(dscp)) != 0) { + rfbClientErr("Setting socket QoS failed: %s\n", strerror(errno)); + return FALSE; + } + + return TRUE; +#endif +} + + + +/* + * StringToIPAddr - convert a host string to an IP address. + */ + +rfbBool +StringToIPAddr(const char *str, unsigned int *addr) +{ + struct hostent *hp; + + if (strcmp(str,"") == 0) { + *addr = htonl(INADDR_LOOPBACK); /* local */ + return TRUE; + } + + *addr = inet_addr(str); + + if (*addr != -1) + return TRUE; + + if (!initSockets()) + return -1; + + hp = gethostbyname(str); + + if (hp) { + *addr = *(unsigned int *)hp->h_addr; + return TRUE; + } + + return FALSE; +} + + +/* + * Test if the other end of a socket is on the same machine. + */ + +rfbBool +SameMachine(int sock) +{ + struct sockaddr_in peeraddr, myaddr; + socklen_t addrlen = sizeof(struct sockaddr_in); + + getpeername(sock, (struct sockaddr *)&peeraddr, &addrlen); + getsockname(sock, (struct sockaddr *)&myaddr, &addrlen); + + return (peeraddr.sin_addr.s_addr == myaddr.sin_addr.s_addr); +} + + +/* + * Print out the contents of a packet for debugging. + */ + +void +PrintInHex(char *buf, int len) +{ + int i, j; + char c, str[17]; + + str[16] = 0; + + rfbClientLog("ReadExact: "); + + for (i = 0; i < len; i++) + { + if ((i % 16 == 0) && (i != 0)) { + rfbClientLog(" "); + } + c = buf[i]; + str[i % 16] = (((c > 31) && (c < 127)) ? c : '.'); + rfbClientLog("%02x ",(unsigned char)c); + if ((i % 4) == 3) + rfbClientLog(" "); + if ((i % 16) == 15) + { + rfbClientLog("%s\n",str); + } + } + if ((i % 16) != 0) + { + for (j = i % 16; j < 16; j++) + { + rfbClientLog(" "); + if ((j % 4) == 3) rfbClientLog(" "); + } + str[i % 16] = 0; + rfbClientLog("%s\n",str); + } + + fflush(stderr); +} + +int WaitForMessage(rfbClient* client,unsigned int usecs) +{ + fd_set fds; + struct timeval timeout; + int num; + + if (client->serverPort==-1) + /* playing back vncrec file */ + return 1; + + timeout.tv_sec=(usecs/1000000); + timeout.tv_usec=(usecs%1000000); + + FD_ZERO(&fds); + FD_SET(client->sock,&fds); + + num=select(client->sock+1, &fds, NULL, NULL, &timeout); + if(num<0) { +#ifdef WIN32 + errno=WSAGetLastError(); +#endif + rfbClientLog("Waiting for message failed: %d (%s)\n",errno,strerror(errno)); + } + + return num; +} + + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/tight.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/tight.c new file mode 100644 index 0000000..2f9fbab --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/tight.c @@ -0,0 +1,688 @@ +/* + * Copyright (C) 2000, 2001 Const Kaplinsky. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#ifdef LIBVNCSERVER_HAVE_LIBZ +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + +/* + * tight.c - handle ``tight'' encoding. + * + * This file shouldn't be compiled directly. It is included multiple + * times by rfbproto.c, each time with a different definition of the + * macro BPP. For each value of BPP, this file defines a function + * which handles a tight-encoded rectangle with BPP bits per pixel. + * + */ + +#define TIGHT_MIN_TO_COMPRESS 12 + +#define CARDBPP CONCAT3E(uint,BPP,_t) +#define filterPtrBPP CONCAT2E(filterPtr,BPP) + +#define HandleTightBPP CONCAT2E(HandleTight,BPP) +#define InitFilterCopyBPP CONCAT2E(InitFilterCopy,BPP) +#define InitFilterPaletteBPP CONCAT2E(InitFilterPalette,BPP) +#define InitFilterGradientBPP CONCAT2E(InitFilterGradient,BPP) +#define FilterCopyBPP CONCAT2E(FilterCopy,BPP) +#define FilterPaletteBPP CONCAT2E(FilterPalette,BPP) +#define FilterGradientBPP CONCAT2E(FilterGradient,BPP) + +#if BPP != 8 +#define DecompressJpegRectBPP CONCAT2E(DecompressJpegRect,BPP) +#endif + +#ifndef RGB_TO_PIXEL + +#define RGB_TO_PIXEL(bpp,r,g,b) \ + (((CARD##bpp)(r) & client->format.redMax) << client->format.redShift | \ + ((CARD##bpp)(g) & client->format.greenMax) << client->format.greenShift | \ + ((CARD##bpp)(b) & client->format.blueMax) << client->format.blueShift) + +#define RGB24_TO_PIXEL(bpp,r,g,b) \ + ((((CARD##bpp)(r) & 0xFF) * client->format.redMax + 127) / 255 \ + << client->format.redShift | \ + (((CARD##bpp)(g) & 0xFF) * client->format.greenMax + 127) / 255 \ + << client->format.greenShift | \ + (((CARD##bpp)(b) & 0xFF) * client->format.blueMax + 127) / 255 \ + << client->format.blueShift) + +#define RGB24_TO_PIXEL32(r,g,b) \ + (((uint32_t)(r) & 0xFF) << client->format.redShift | \ + ((uint32_t)(g) & 0xFF) << client->format.greenShift | \ + ((uint32_t)(b) & 0xFF) << client->format.blueShift) + +#endif + +/* Type declarations */ + +typedef void (*filterPtrBPP)(rfbClient* client, int, CARDBPP *); + +/* Prototypes */ + +static int InitFilterCopyBPP (rfbClient* client, int rw, int rh); +static int InitFilterPaletteBPP (rfbClient* client, int rw, int rh); +static int InitFilterGradientBPP (rfbClient* client, int rw, int rh); +static void FilterCopyBPP (rfbClient* client, int numRows, CARDBPP *destBuffer); +static void FilterPaletteBPP (rfbClient* client, int numRows, CARDBPP *destBuffer); +static void FilterGradientBPP (rfbClient* client, int numRows, CARDBPP *destBuffer); + +#if BPP != 8 +static rfbBool DecompressJpegRectBPP(rfbClient* client, int x, int y, int w, int h); +#endif + +/* Definitions */ + +static rfbBool +HandleTightBPP (rfbClient* client, int rx, int ry, int rw, int rh) +{ + CARDBPP fill_colour; + uint8_t comp_ctl; + uint8_t filter_id; + filterPtrBPP filterFn; + z_streamp zs; + char *buffer2; + int err, stream_id, compressedLen, bitsPixel; + int bufferSize, rowSize, numRows, portionLen, rowsProcessed, extraBytes; + + if (!ReadFromRFBServer(client, (char *)&comp_ctl, 1)) + return FALSE; + + /* Flush zlib streams if we are told by the server to do so. */ + for (stream_id = 0; stream_id < 4; stream_id++) { + if ((comp_ctl & 1) && client->zlibStreamActive[stream_id]) { + if (inflateEnd (&client->zlibStream[stream_id]) != Z_OK && + client->zlibStream[stream_id].msg != NULL) + rfbClientLog("inflateEnd: %s\n", client->zlibStream[stream_id].msg); + client->zlibStreamActive[stream_id] = FALSE; + } + comp_ctl >>= 1; + } + + /* Handle solid rectangles. */ + if (comp_ctl == rfbTightFill) { +#if BPP == 32 + if (client->format.depth == 24 && client->format.redMax == 0xFF && + client->format.greenMax == 0xFF && client->format.blueMax == 0xFF) { + if (!ReadFromRFBServer(client, client->buffer, 3)) + return FALSE; + fill_colour = RGB24_TO_PIXEL32(client->buffer[0], client->buffer[1], client->buffer[2]); + } else { + if (!ReadFromRFBServer(client, (char*)&fill_colour, sizeof(fill_colour))) + return FALSE; + } +#else + if (!ReadFromRFBServer(client, (char*)&fill_colour, sizeof(fill_colour))) + return FALSE; +#endif + + FillRectangle(client, rx, ry, rw, rh, fill_colour); + + return TRUE; + } + +#if BPP == 8 + if (comp_ctl == rfbTightJpeg) { + rfbClientLog("Tight encoding: JPEG is not supported in 8 bpp mode.\n"); + return FALSE; + } +#else + if (comp_ctl == rfbTightJpeg) { + return DecompressJpegRectBPP(client, rx, ry, rw, rh); + } +#endif + + /* Quit on unsupported subencoding value. */ + if (comp_ctl > rfbTightMaxSubencoding) { + rfbClientLog("Tight encoding: bad subencoding value received.\n"); + return FALSE; + } + + /* + * Here primary compression mode handling begins. + * Data was processed with optional filter + zlib compression. + */ + + /* First, we should identify a filter to use. */ + if ((comp_ctl & rfbTightExplicitFilter) != 0) { + if (!ReadFromRFBServer(client, (char*)&filter_id, 1)) + return FALSE; + + switch (filter_id) { + case rfbTightFilterCopy: + filterFn = FilterCopyBPP; + bitsPixel = InitFilterCopyBPP(client, rw, rh); + break; + case rfbTightFilterPalette: + filterFn = FilterPaletteBPP; + bitsPixel = InitFilterPaletteBPP(client, rw, rh); + break; + case rfbTightFilterGradient: + filterFn = FilterGradientBPP; + bitsPixel = InitFilterGradientBPP(client, rw, rh); + break; + default: + rfbClientLog("Tight encoding: unknown filter code received.\n"); + return FALSE; + } + } else { + filterFn = FilterCopyBPP; + bitsPixel = InitFilterCopyBPP(client, rw, rh); + } + if (bitsPixel == 0) { + rfbClientLog("Tight encoding: error receiving palette.\n"); + return FALSE; + } + + /* Determine if the data should be decompressed or just copied. */ + rowSize = (rw * bitsPixel + 7) / 8; + if (rh * rowSize < TIGHT_MIN_TO_COMPRESS) { + if (!ReadFromRFBServer(client, (char*)client->buffer, rh * rowSize)) + return FALSE; + + buffer2 = &client->buffer[TIGHT_MIN_TO_COMPRESS * 4]; + filterFn(client, rh, (CARDBPP *)buffer2); + + CopyRectangle(client, (uint8_t *)buffer2, rx, ry, rw, rh); + + return TRUE; + } + + /* Read the length (1..3 bytes) of compressed data following. */ + compressedLen = (int)ReadCompactLen(client); + if (compressedLen <= 0) { + rfbClientLog("Incorrect data received from the server.\n"); + return FALSE; + } + + /* Now let's initialize compression stream if needed. */ + stream_id = comp_ctl & 0x03; + zs = &client->zlibStream[stream_id]; + if (!client->zlibStreamActive[stream_id]) { + zs->zalloc = Z_NULL; + zs->zfree = Z_NULL; + zs->opaque = Z_NULL; + err = inflateInit(zs); + if (err != Z_OK) { + if (zs->msg != NULL) + rfbClientLog("InflateInit error: %s.\n", zs->msg); + return FALSE; + } + client->zlibStreamActive[stream_id] = TRUE; + } + + /* Read, decode and draw actual pixel data in a loop. */ + + bufferSize = RFB_BUFFER_SIZE * bitsPixel / (bitsPixel + BPP) & 0xFFFFFFFC; + buffer2 = &client->buffer[bufferSize]; + if (rowSize > bufferSize) { + /* Should be impossible when RFB_BUFFER_SIZE >= 16384 */ + rfbClientLog("Internal error: incorrect buffer size.\n"); + return FALSE; + } + + rowsProcessed = 0; + extraBytes = 0; + + while (compressedLen > 0) { + if (compressedLen > ZLIB_BUFFER_SIZE) + portionLen = ZLIB_BUFFER_SIZE; + else + portionLen = compressedLen; + + if (!ReadFromRFBServer(client, (char*)client->zlib_buffer, portionLen)) + return FALSE; + + compressedLen -= portionLen; + + zs->next_in = (Bytef *)client->zlib_buffer; + zs->avail_in = portionLen; + + do { + zs->next_out = (Bytef *)&client->buffer[extraBytes]; + zs->avail_out = bufferSize - extraBytes; + + err = inflate(zs, Z_SYNC_FLUSH); + if (err == Z_BUF_ERROR) /* Input exhausted -- no problem. */ + break; + if (err != Z_OK && err != Z_STREAM_END) { + if (zs->msg != NULL) { + rfbClientLog("Inflate error: %s.\n", zs->msg); + } else { + rfbClientLog("Inflate error: %d.\n", err); + } + return FALSE; + } + + numRows = (bufferSize - zs->avail_out) / rowSize; + + filterFn(client, numRows, (CARDBPP *)buffer2); + + extraBytes = bufferSize - zs->avail_out - numRows * rowSize; + if (extraBytes > 0) + memcpy(client->buffer, &client->buffer[numRows * rowSize], extraBytes); + + CopyRectangle(client, (uint8_t *)buffer2, rx, ry+rowsProcessed, rw, numRows); + + rowsProcessed += numRows; + } + while (zs->avail_out == 0); + } + + if (rowsProcessed != rh) { + rfbClientLog("Incorrect number of scan lines after decompression.\n"); + return FALSE; + } + + return TRUE; +} + +/*---------------------------------------------------------------------------- + * + * Filter stuff. + * + */ + +static int +InitFilterCopyBPP (rfbClient* client, int rw, int rh) +{ + client->rectWidth = rw; + +#if BPP == 32 + if (client->format.depth == 24 && client->format.redMax == 0xFF && + client->format.greenMax == 0xFF && client->format.blueMax == 0xFF) { + client->cutZeros = TRUE; + return 24; + } else { + client->cutZeros = FALSE; + } +#endif + + return BPP; +} + +static void +FilterCopyBPP (rfbClient* client, int numRows, CARDBPP *dst) +{ + +#if BPP == 32 + int x, y; + + if (client->cutZeros) { + for (y = 0; y < numRows; y++) { + for (x = 0; x < client->rectWidth; x++) { + dst[y*client->rectWidth+x] = + RGB24_TO_PIXEL32(client->buffer[(y*client->rectWidth+x)*3], + client->buffer[(y*client->rectWidth+x)*3+1], + client->buffer[(y*client->rectWidth+x)*3+2]); + } + } + return; + } +#endif + + memcpy (dst, client->buffer, numRows * client->rectWidth * (BPP / 8)); +} + +static int +InitFilterGradientBPP (rfbClient* client, int rw, int rh) +{ + int bits; + + bits = InitFilterCopyBPP(client, rw, rh); + if (client->cutZeros) + memset(client->tightPrevRow, 0, rw * 3); + else + memset(client->tightPrevRow, 0, rw * 3 * sizeof(uint16_t)); + + return bits; +} + +#if BPP == 32 + +static void +FilterGradient24 (rfbClient* client, int numRows, uint32_t *dst) +{ + int x, y, c; + uint8_t thisRow[2048*3]; + uint8_t pix[3]; + int est[3]; + + for (y = 0; y < numRows; y++) { + + /* First pixel in a row */ + for (c = 0; c < 3; c++) { + pix[c] = client->tightPrevRow[c] + client->buffer[y*client->rectWidth*3+c]; + thisRow[c] = pix[c]; + } + dst[y*client->rectWidth] = RGB24_TO_PIXEL32(pix[0], pix[1], pix[2]); + + /* Remaining pixels of a row */ + for (x = 1; x < client->rectWidth; x++) { + for (c = 0; c < 3; c++) { + est[c] = (int)client->tightPrevRow[x*3+c] + (int)pix[c] - + (int)client->tightPrevRow[(x-1)*3+c]; + if (est[c] > 0xFF) { + est[c] = 0xFF; + } else if (est[c] < 0x00) { + est[c] = 0x00; + } + pix[c] = (uint8_t)est[c] + client->buffer[(y*client->rectWidth+x)*3+c]; + thisRow[x*3+c] = pix[c]; + } + dst[y*client->rectWidth+x] = RGB24_TO_PIXEL32(pix[0], pix[1], pix[2]); + } + + memcpy(client->tightPrevRow, thisRow, client->rectWidth * 3); + } +} + +#endif + +static void +FilterGradientBPP (rfbClient* client, int numRows, CARDBPP *dst) +{ + int x, y, c; + CARDBPP *src = (CARDBPP *)client->buffer; + uint16_t *thatRow = (uint16_t *)client->tightPrevRow; + uint16_t thisRow[2048*3]; + uint16_t pix[3]; + uint16_t max[3]; + int shift[3]; + int est[3]; + +#if BPP == 32 + if (client->cutZeros) { + FilterGradient24(client, numRows, dst); + return; + } +#endif + + max[0] = client->format.redMax; + max[1] = client->format.greenMax; + max[2] = client->format.blueMax; + + shift[0] = client->format.redShift; + shift[1] = client->format.greenShift; + shift[2] = client->format.blueShift; + + for (y = 0; y < numRows; y++) { + + /* First pixel in a row */ + for (c = 0; c < 3; c++) { + pix[c] = (uint16_t)(((src[y*client->rectWidth] >> shift[c]) + thatRow[c]) & max[c]); + thisRow[c] = pix[c]; + } + dst[y*client->rectWidth] = RGB_TO_PIXEL(BPP, pix[0], pix[1], pix[2]); + + /* Remaining pixels of a row */ + for (x = 1; x < client->rectWidth; x++) { + for (c = 0; c < 3; c++) { + est[c] = (int)thatRow[x*3+c] + (int)pix[c] - (int)thatRow[(x-1)*3+c]; + if (est[c] > (int)max[c]) { + est[c] = (int)max[c]; + } else if (est[c] < 0) { + est[c] = 0; + } + pix[c] = (uint16_t)(((src[y*client->rectWidth+x] >> shift[c]) + est[c]) & max[c]); + thisRow[x*3+c] = pix[c]; + } + dst[y*client->rectWidth+x] = RGB_TO_PIXEL(BPP, pix[0], pix[1], pix[2]); + } + memcpy(thatRow, thisRow, client->rectWidth * 3 * sizeof(uint16_t)); + } +} + +static int +InitFilterPaletteBPP (rfbClient* client, int rw, int rh) +{ + uint8_t numColors; +#if BPP == 32 + int i; + CARDBPP *palette = (CARDBPP *)client->tightPalette; +#endif + + client->rectWidth = rw; + + if (!ReadFromRFBServer(client, (char*)&numColors, 1)) + return 0; + + client->rectColors = (int)numColors; + if (++client->rectColors < 2) + return 0; + +#if BPP == 32 + if (client->format.depth == 24 && client->format.redMax == 0xFF && + client->format.greenMax == 0xFF && client->format.blueMax == 0xFF) { + if (!ReadFromRFBServer(client, (char*)&client->tightPalette, client->rectColors * 3)) + return 0; + for (i = client->rectColors - 1; i >= 0; i--) { + palette[i] = RGB24_TO_PIXEL32(client->tightPalette[i*3], + client->tightPalette[i*3+1], + client->tightPalette[i*3+2]); + } + return (client->rectColors == 2) ? 1 : 8; + } +#endif + + if (!ReadFromRFBServer(client, (char*)&client->tightPalette, client->rectColors * (BPP / 8))) + return 0; + + return (client->rectColors == 2) ? 1 : 8; +} + +static void +FilterPaletteBPP (rfbClient* client, int numRows, CARDBPP *dst) +{ + int x, y, b, w; + uint8_t *src = (uint8_t *)client->buffer; + CARDBPP *palette = (CARDBPP *)client->tightPalette; + + if (client->rectColors == 2) { + w = (client->rectWidth + 7) / 8; + for (y = 0; y < numRows; y++) { + for (x = 0; x < client->rectWidth / 8; x++) { + for (b = 7; b >= 0; b--) + dst[y*client->rectWidth+x*8+7-b] = palette[src[y*w+x] >> b & 1]; + } + for (b = 7; b >= 8 - client->rectWidth % 8; b--) { + dst[y*client->rectWidth+x*8+7-b] = palette[src[y*w+x] >> b & 1]; + } + } + } else { + for (y = 0; y < numRows; y++) + for (x = 0; x < client->rectWidth; x++) + dst[y*client->rectWidth+x] = palette[(int)src[y*client->rectWidth+x]]; + } +} + +#if BPP != 8 + +/*---------------------------------------------------------------------------- + * + * JPEG decompression. + * + */ + +static rfbBool +DecompressJpegRectBPP(rfbClient* client, int x, int y, int w, int h) +{ + struct jpeg_decompress_struct cinfo; + struct jpeg_error_mgr jerr; + int compressedLen; + uint8_t *compressedData; + CARDBPP *pixelPtr; + JSAMPROW rowPointer[1]; + int dx, dy; + + compressedLen = (int)ReadCompactLen(client); + if (compressedLen <= 0) { + rfbClientLog("Incorrect data received from the server.\n"); + return FALSE; + } + + compressedData = malloc(compressedLen); + if (compressedData == NULL) { + rfbClientLog("Memory allocation error.\n"); + return FALSE; + } + + if (!ReadFromRFBServer(client, (char*)compressedData, compressedLen)) { + free(compressedData); + return FALSE; + } + + cinfo.err = jpeg_std_error(&jerr); + cinfo.client_data = client; + jpeg_create_decompress(&cinfo); + + JpegSetSrcManager(&cinfo, compressedData, compressedLen); + + jpeg_read_header(&cinfo, TRUE); + cinfo.out_color_space = JCS_RGB; + + jpeg_start_decompress(&cinfo); + if (cinfo.output_width != w || cinfo.output_height != h || + cinfo.output_components != 3) { + rfbClientLog("Tight Encoding: Wrong JPEG data received.\n"); + jpeg_destroy_decompress(&cinfo); + free(compressedData); + return FALSE; + } + + rowPointer[0] = (JSAMPROW)client->buffer; + dy = 0; + while (cinfo.output_scanline < cinfo.output_height) { + jpeg_read_scanlines(&cinfo, rowPointer, 1); + if (client->jpegError) { + break; + } + pixelPtr = (CARDBPP *)&client->buffer[RFB_BUFFER_SIZE / 2]; + for (dx = 0; dx < w; dx++) { + *pixelPtr++ = + RGB24_TO_PIXEL(BPP, client->buffer[dx*3], client->buffer[dx*3+1], client->buffer[dx*3+2]); + } + CopyRectangle(client, (uint8_t *)&client->buffer[RFB_BUFFER_SIZE / 2], x, y + dy, w, 1); + dy++; + } + + if (!client->jpegError) + jpeg_finish_decompress(&cinfo); + + jpeg_destroy_decompress(&cinfo); + free(compressedData); + + return !client->jpegError; +} + +#else + +static long +ReadCompactLen (rfbClient* client) +{ + long len; + uint8_t b; + + if (!ReadFromRFBServer(client, (char *)&b, 1)) + return -1; + len = (int)b & 0x7F; + if (b & 0x80) { + if (!ReadFromRFBServer(client, (char *)&b, 1)) + return -1; + len |= ((int)b & 0x7F) << 7; + if (b & 0x80) { + if (!ReadFromRFBServer(client, (char *)&b, 1)) + return -1; + len |= ((int)b & 0xFF) << 14; + } + } + return len; +} + +/* + * JPEG source manager functions for JPEG decompression in Tight decoder. + */ + +static void +JpegInitSource(j_decompress_ptr cinfo) +{ + rfbClient* client=(rfbClient*)cinfo->client_data; + client->jpegError = FALSE; +} + +static boolean +JpegFillInputBuffer(j_decompress_ptr cinfo) +{ + rfbClient* client=(rfbClient*)cinfo->client_data; + client->jpegError = TRUE; + client->jpegSrcManager->bytes_in_buffer = client->jpegBufferLen; + client->jpegSrcManager->next_input_byte = (JOCTET *)client->jpegBufferPtr; + + return TRUE; +} + +static void +JpegSkipInputData(j_decompress_ptr cinfo, long num_bytes) +{ + rfbClient* client=(rfbClient*)cinfo->client_data; + if (num_bytes < 0 || num_bytes > client->jpegSrcManager->bytes_in_buffer) { + client->jpegError = TRUE; + client->jpegSrcManager->bytes_in_buffer = client->jpegBufferLen; + client->jpegSrcManager->next_input_byte = (JOCTET *)client->jpegBufferPtr; + } else { + client->jpegSrcManager->next_input_byte += (size_t) num_bytes; + client->jpegSrcManager->bytes_in_buffer -= (size_t) num_bytes; + } +} + +static void +JpegTermSource(j_decompress_ptr cinfo) +{ + /* nothing to do here. */ +} + +static void +JpegSetSrcManager(j_decompress_ptr cinfo, + uint8_t *compressedData, + int compressedLen) +{ + rfbClient* client=(rfbClient*)cinfo->client_data; + client->jpegBufferPtr = compressedData; + client->jpegBufferLen = (size_t)compressedLen; + + if(client->jpegSrcManager == NULL) + client->jpegSrcManager = malloc(sizeof(struct jpeg_source_mgr)); + client->jpegSrcManager->init_source = JpegInitSource; + client->jpegSrcManager->fill_input_buffer = JpegFillInputBuffer; + client->jpegSrcManager->skip_input_data = JpegSkipInputData; + client->jpegSrcManager->resync_to_restart = jpeg_resync_to_restart; + client->jpegSrcManager->term_source = JpegTermSource; + client->jpegSrcManager->next_input_byte = (JOCTET*)client->jpegBufferPtr; + client->jpegSrcManager->bytes_in_buffer = client->jpegBufferLen; + + cinfo->src = client->jpegSrcManager; +} + +#endif + +#undef CARDBPP + +/* LIBVNCSERVER_HAVE_LIBZ and LIBVNCSERVER_HAVE_LIBJPEG */ +#endif +#endif + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls.h b/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls.h new file mode 100644 index 0000000..48d159b --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls.h @@ -0,0 +1,51 @@ +#ifndef TLS_H +#define TLS_H + +/* + * Copyright (C) 2009 Vic Lee. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* Handle Anonymous TLS Authentication (18) with the server. + * After authentication, client->tlsSession will be set. + */ +rfbBool HandleAnonTLSAuth(rfbClient* client); + +/* Handle VeNCrypt Authentication (19) with the server. + * The callback function GetX509Credential will be called. + * After authentication, client->tlsSession will be set. + */ +rfbBool HandleVeNCryptAuth(rfbClient* client); + +/* Read desired bytes from TLS session. + * It's a wrapper function over gnutls_record_recv() and return values + * are same as read(), that is, >0 for actual bytes read, 0 for EOF, + * or EAGAIN, EINTR. + * This should be a non-blocking call. Blocking is handled in sockets.c. + */ +int ReadFromTLS(rfbClient* client, char *out, unsigned int n); + +/* Write desired bytes to TLS session. + * It's a wrapper function over gnutls_record_send() and it will be + * blocking call, until all bytes are written or error returned. + */ +int WriteToTLS(rfbClient* client, char *buf, unsigned int n); + +/* Free TLS resources */ +void FreeTLS(rfbClient* client); + +#endif /* TLS_H */ diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls_gnutls.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls_gnutls.c new file mode 100644 index 0000000..3daa416 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls_gnutls.c @@ -0,0 +1,505 @@ +/* + * Copyright (C) 2009 Vic Lee. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include +#include +#ifdef WIN32 +#undef SOCKET +#include /* for Sleep() */ +#define sleep(X) Sleep(1000*X) /* MinGW32 has no sleep() */ +#include +#define read(sock,buf,len) recv(sock,buf,len,0) +#define write(sock,buf,len) send(sock,buf,len,0) +#endif +#include "tls.h" + + +static const char *rfbTLSPriority = "NORMAL:+DHE-DSS:+RSA:+DHE-RSA:+SRP"; +static const char *rfbAnonTLSPriority= "NORMAL:+ANON-DH"; + +#define DH_BITS 1024 +static gnutls_dh_params_t rfbDHParams; + +static rfbBool rfbTLSInitialized = FALSE; + +static rfbBool +InitializeTLS(void) +{ + int ret; + + if (rfbTLSInitialized) return TRUE; + if ((ret = gnutls_global_init()) < 0 || + (ret = gnutls_dh_params_init(&rfbDHParams)) < 0 || + (ret = gnutls_dh_params_generate2(rfbDHParams, DH_BITS)) < 0) + { + rfbClientLog("Failed to initialized GnuTLS: %s.\n", gnutls_strerror(ret)); + return FALSE; + } + rfbClientLog("GnuTLS initialized.\n"); + rfbTLSInitialized = TRUE; + return TRUE; +} + +/* + * On Windows, translate WSAGetLastError() to errno values as GNU TLS does it + * internally too. This is necessary because send() and recv() on Windows + * don't set errno when they fail but GNUTLS expects a proper errno value. + * + * Use gnutls_transport_set_global_errno() like the GNU TLS documentation + * suggests to avoid problems with different errno variables when GNU TLS and + * libvncclient are linked to different versions of msvcrt.dll. + */ +#ifdef WIN32 +static void WSAtoTLSErrno() +{ + switch(WSAGetLastError()) { + case WSAEWOULDBLOCK: + gnutls_transport_set_global_errno(EAGAIN); + break; + case WSAEINTR: + gnutls_transport_set_global_errno(EINTR); + break; + default: + gnutls_transport_set_global_errno(EIO); + break; + } +} +#endif + + +static ssize_t +PushTLS(gnutls_transport_ptr_t transport, const void *data, size_t len) +{ + rfbClient *client = (rfbClient*)transport; + int ret; + + while (1) + { + ret = write(client->sock, data, len); + if (ret < 0) + { +#ifdef WIN32 + WSAtoTLSErrno(); +#endif + if (errno == EINTR) continue; + return -1; + } + return ret; + } +} + + +static ssize_t +PullTLS(gnutls_transport_ptr_t transport, void *data, size_t len) +{ + rfbClient *client = (rfbClient*)transport; + int ret; + + while (1) + { + ret = read(client->sock, data, len); + if (ret < 0) + { +#ifdef WIN32 + WSAtoTLSErrno(); +#endif + if (errno == EINTR) continue; + return -1; + } + return ret; + } +} + +static rfbBool +InitializeTLSSession(rfbClient* client, rfbBool anonTLS) +{ + int ret; + const char *p; + + if (client->tlsSession) return TRUE; + + if ((ret = gnutls_init((gnutls_session_t*)&client->tlsSession, GNUTLS_CLIENT)) < 0) + { + rfbClientLog("Failed to initialized TLS session: %s.\n", gnutls_strerror(ret)); + return FALSE; + } + + if ((ret = gnutls_priority_set_direct((gnutls_session_t)client->tlsSession, + anonTLS ? rfbAnonTLSPriority : rfbTLSPriority, &p)) < 0) + { + rfbClientLog("Warning: Failed to set TLS priority: %s (%s).\n", gnutls_strerror(ret), p); + } + + gnutls_transport_set_ptr((gnutls_session_t)client->tlsSession, (gnutls_transport_ptr_t)client); + gnutls_transport_set_push_function((gnutls_session_t)client->tlsSession, PushTLS); + gnutls_transport_set_pull_function((gnutls_session_t)client->tlsSession, PullTLS); + + rfbClientLog("TLS session initialized.\n"); + + return TRUE; +} + +static rfbBool +SetTLSAnonCredential(rfbClient* client) +{ + gnutls_anon_client_credentials anonCred; + int ret; + + if ((ret = gnutls_anon_allocate_client_credentials(&anonCred)) < 0 || + (ret = gnutls_credentials_set((gnutls_session_t)client->tlsSession, GNUTLS_CRD_ANON, anonCred)) < 0) + { + FreeTLS(client); + rfbClientLog("Failed to create anonymous credentials: %s", gnutls_strerror(ret)); + return FALSE; + } + rfbClientLog("TLS anonymous credential created.\n"); + return TRUE; +} + +static rfbBool +HandshakeTLS(rfbClient* client) +{ + int timeout = 15; + int ret; + + while (timeout > 0 && (ret = gnutls_handshake((gnutls_session_t)client->tlsSession)) < 0) + { + if (!gnutls_error_is_fatal(ret)) + { + rfbClientLog("TLS handshake blocking.\n"); + sleep(1); + timeout--; + continue; + } + rfbClientLog("TLS handshake failed: %s.\n", gnutls_strerror(ret)); + FreeTLS(client); + return FALSE; + } + + if (timeout <= 0) + { + rfbClientLog("TLS handshake timeout.\n"); + FreeTLS(client); + return FALSE; + } + + rfbClientLog("TLS handshake done.\n"); + return TRUE; +} + +/* VeNCrypt sub auth. 1 byte auth count, followed by count * 4 byte integers */ +static rfbBool +ReadVeNCryptSecurityType(rfbClient* client, uint32_t *result) +{ + uint8_t count=0; + uint8_t loop=0; + uint8_t flag=0; + uint32_t tAuth[256], t; + char buf1[500],buf2[10]; + uint32_t authScheme; + + if (!ReadFromRFBServer(client, (char *)&count, 1)) return FALSE; + + if (count==0) + { + rfbClientLog("List of security types is ZERO. Giving up.\n"); + return FALSE; + } + + if (count>sizeof(tAuth)) + { + rfbClientLog("%d security types are too many; maximum is %d\n", count, sizeof(tAuth)); + return FALSE; + } + + rfbClientLog("We have %d security types to read\n", count); + authScheme=0; + /* now, we have a list of available security types to read ( uint8_t[] ) */ + for (loop=0;loop=sizeof(buf1)-1) break; + snprintf(buf2, sizeof(buf2), (loop>0 ? ", %d" : "%d"), (int)tAuth[loop]); + strncat(buf1, buf2, sizeof(buf1)-strlen(buf1)-1); + } + rfbClientLog("Unknown VeNCrypt authentication scheme from VNC server: %s\n", + buf1); + return FALSE; + } + *result = authScheme; + return TRUE; +} + +static void +FreeX509Credential(rfbCredential *cred) +{ + if (cred->x509Credential.x509CACertFile) free(cred->x509Credential.x509CACertFile); + if (cred->x509Credential.x509CACrlFile) free(cred->x509Credential.x509CACrlFile); + if (cred->x509Credential.x509ClientCertFile) free(cred->x509Credential.x509ClientCertFile); + if (cred->x509Credential.x509ClientKeyFile) free(cred->x509Credential.x509ClientKeyFile); + free(cred); +} + +static gnutls_certificate_credentials_t +CreateX509CertCredential(rfbCredential *cred) +{ + gnutls_certificate_credentials_t x509_cred; + int ret; + + if (!cred->x509Credential.x509CACertFile) + { + rfbClientLog("No CA certificate provided.\n"); + return NULL; + } + + if ((ret = gnutls_certificate_allocate_credentials(&x509_cred)) < 0) + { + rfbClientLog("Cannot allocate credentials: %s.\n", gnutls_strerror(ret)); + return NULL; + } + if ((ret = gnutls_certificate_set_x509_trust_file(x509_cred, + cred->x509Credential.x509CACertFile, GNUTLS_X509_FMT_PEM)) < 0) + { + rfbClientLog("Cannot load CA credentials: %s.\n", gnutls_strerror(ret)); + gnutls_certificate_free_credentials (x509_cred); + return NULL; + } + if (cred->x509Credential.x509ClientCertFile && cred->x509Credential.x509ClientKeyFile) + { + if ((ret = gnutls_certificate_set_x509_key_file(x509_cred, + cred->x509Credential.x509ClientCertFile, cred->x509Credential.x509ClientKeyFile, + GNUTLS_X509_FMT_PEM)) < 0) + { + rfbClientLog("Cannot load client certificate or key: %s.\n", gnutls_strerror(ret)); + gnutls_certificate_free_credentials (x509_cred); + return NULL; + } + } else + { + rfbClientLog("No client certificate or key provided.\n"); + } + if (cred->x509Credential.x509CACrlFile) + { + if ((ret = gnutls_certificate_set_x509_crl_file(x509_cred, + cred->x509Credential.x509CACrlFile, GNUTLS_X509_FMT_PEM)) < 0) + { + rfbClientLog("Cannot load CRL: %s.\n", gnutls_strerror(ret)); + gnutls_certificate_free_credentials (x509_cred); + return NULL; + } + } else + { + rfbClientLog("No CRL provided.\n"); + } + gnutls_certificate_set_dh_params (x509_cred, rfbDHParams); + return x509_cred; +} + + +rfbBool +HandleAnonTLSAuth(rfbClient* client) +{ + if (!InitializeTLS() || !InitializeTLSSession(client, TRUE)) return FALSE; + + if (!SetTLSAnonCredential(client)) return FALSE; + + if (!HandshakeTLS(client)) return FALSE; + + return TRUE; +} + +rfbBool +HandleVeNCryptAuth(rfbClient* client) +{ + uint8_t major, minor, status; + uint32_t authScheme; + rfbBool anonTLS; + gnutls_certificate_credentials_t x509_cred = NULL; + int ret; + + if (!InitializeTLS()) return FALSE; + + /* Read VeNCrypt version */ + if (!ReadFromRFBServer(client, (char *)&major, 1) || + !ReadFromRFBServer(client, (char *)&minor, 1)) + { + return FALSE; + } + rfbClientLog("Got VeNCrypt version %d.%d from server.\n", (int)major, (int)minor); + + if (major != 0 && minor != 2) + { + rfbClientLog("Unsupported VeNCrypt version.\n"); + return FALSE; + } + + if (!WriteToRFBServer(client, (char *)&major, 1) || + !WriteToRFBServer(client, (char *)&minor, 1) || + !ReadFromRFBServer(client, (char *)&status, 1)) + { + return FALSE; + } + + if (status != 0) + { + rfbClientLog("Server refused VeNCrypt version %d.%d.\n", (int)major, (int)minor); + return FALSE; + } + + if (!ReadVeNCryptSecurityType(client, &authScheme)) return FALSE; + if (!ReadFromRFBServer(client, (char *)&status, 1) || status != 1) + { + rfbClientLog("Server refused VeNCrypt authentication %d (%d).\n", authScheme, (int)status); + return FALSE; + } + client->subAuthScheme = authScheme; + + /* Some VeNCrypt security types are anonymous TLS, others are X509 */ + switch (authScheme) + { + case rfbVeNCryptTLSNone: + case rfbVeNCryptTLSVNC: + case rfbVeNCryptTLSPlain: + anonTLS = TRUE; + break; + default: + anonTLS = FALSE; + break; + } + + /* Get X509 Credentials if it's not anonymous */ + if (!anonTLS) + { + rfbCredential *cred; + + if (!client->GetCredential) + { + rfbClientLog("GetCredential callback is not set.\n"); + return FALSE; + } + cred = client->GetCredential(client, rfbCredentialTypeX509); + if (!cred) + { + rfbClientLog("Reading credential failed\n"); + return FALSE; + } + + x509_cred = CreateX509CertCredential(cred); + FreeX509Credential(cred); + if (!x509_cred) return FALSE; + } + + /* Start up the TLS session */ + if (!InitializeTLSSession(client, anonTLS)) return FALSE; + + if (anonTLS) + { + if (!SetTLSAnonCredential(client)) return FALSE; + } + else + { + if ((ret = gnutls_credentials_set((gnutls_session_t)client->tlsSession, GNUTLS_CRD_CERTIFICATE, x509_cred)) < 0) + { + rfbClientLog("Cannot set x509 credential: %s.\n", gnutls_strerror(ret)); + FreeTLS(client); + return FALSE; + } + } + + if (!HandshakeTLS(client)) return FALSE; + + /* TODO: validate certificate */ + + /* We are done here. The caller should continue with client->subAuthScheme + * to do actual sub authentication. + */ + return TRUE; +} + +int +ReadFromTLS(rfbClient* client, char *out, unsigned int n) +{ + ssize_t ret; + + ret = gnutls_record_recv((gnutls_session_t)client->tlsSession, out, n); + if (ret >= 0) return ret; + if (ret == GNUTLS_E_REHANDSHAKE || ret == GNUTLS_E_AGAIN) + { + errno = EAGAIN; + } else + { + rfbClientLog("Error reading from TLS: %s.\n", gnutls_strerror(ret)); + errno = EINTR; + } + return -1; +} + +int +WriteToTLS(rfbClient* client, char *buf, unsigned int n) +{ + unsigned int offset = 0; + ssize_t ret; + + while (offset < n) + { + ret = gnutls_record_send((gnutls_session_t)client->tlsSession, buf+offset, (size_t)(n-offset)); + if (ret == 0) continue; + if (ret < 0) + { + if (ret == GNUTLS_E_AGAIN || ret == GNUTLS_E_INTERRUPTED) continue; + rfbClientLog("Error writing to TLS: %s.\n", gnutls_strerror(ret)); + return -1; + } + offset += (unsigned int)ret; + } + return offset; +} + +void FreeTLS(rfbClient* client) +{ + if (client->tlsSession) + { + gnutls_deinit((gnutls_session_t)client->tlsSession); + client->tlsSession = NULL; + } +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls_none.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls_none.c new file mode 100644 index 0000000..91a9f93 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls_none.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2012 Christian Beier. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include +#include "tls.h" + +rfbBool HandleAnonTLSAuth(rfbClient* client) +{ + rfbClientLog("TLS is not supported.\n"); + return FALSE; +} + + +rfbBool HandleVeNCryptAuth(rfbClient* client) +{ + rfbClientLog("TLS is not supported.\n"); + return FALSE; +} + + +int ReadFromTLS(rfbClient* client, char *out, unsigned int n) +{ + rfbClientLog("TLS is not supported.\n"); + errno = EINTR; + return -1; +} + + +int WriteToTLS(rfbClient* client, char *buf, unsigned int n) +{ + rfbClientLog("TLS is not supported.\n"); + errno = EINTR; + return -1; +} + + +void FreeTLS(rfbClient* client) +{ + +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls_openssl.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls_openssl.c new file mode 100644 index 0000000..b6df946 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/tls_openssl.c @@ -0,0 +1,587 @@ +/* + * Copyright (C) 2012 Philip Van Hoof + * Copyright (C) 2009 Vic Lee. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include + +#include +#include +#include +#include +#include + +#include + +#include "tls.h" + +static rfbBool rfbTLSInitialized = FALSE; +static pthread_mutex_t *mutex_buf = NULL; + +struct CRYPTO_dynlock_value { + pthread_mutex_t mutex; +}; + +static void locking_function(int mode, int n, const char *file, int line) +{ + if (mode & CRYPTO_LOCK) + pthread_mutex_lock(&mutex_buf[n]); + else + pthread_mutex_unlock(&mutex_buf[n]); +} + +static unsigned long id_function(void) +{ + return ((unsigned long) pthread_self()); +} + +static struct CRYPTO_dynlock_value *dyn_create_function(const char *file, int line) +{ + struct CRYPTO_dynlock_value *value; + + value = (struct CRYPTO_dynlock_value *) + malloc(sizeof(struct CRYPTO_dynlock_value)); + if (!value) + goto err; + pthread_mutex_init(&value->mutex, NULL); + + return value; + +err: + return (NULL); +} + +static void dyn_lock_function (int mode, struct CRYPTO_dynlock_value *l, const char *file, int line) +{ + if (mode & CRYPTO_LOCK) + pthread_mutex_lock(&l->mutex); + else + pthread_mutex_unlock(&l->mutex); +} + + +static void +dyn_destroy_function(struct CRYPTO_dynlock_value *l, const char *file, int line) +{ + pthread_mutex_destroy(&l->mutex); + free(l); +} + + +static int +ssl_errno (SSL *ssl, int ret) +{ + switch (SSL_get_error (ssl, ret)) { + case SSL_ERROR_NONE: + return 0; + case SSL_ERROR_ZERO_RETURN: + /* this one does not map well at all */ + //d(printf ("ssl_errno: SSL_ERROR_ZERO_RETURN\n")); + return EINVAL; + case SSL_ERROR_WANT_READ: /* non-fatal; retry */ + case SSL_ERROR_WANT_WRITE: /* non-fatal; retry */ + //d(printf ("ssl_errno: SSL_ERROR_WANT_[READ,WRITE]\n")); + return EAGAIN; + case SSL_ERROR_SYSCALL: + //d(printf ("ssl_errno: SSL_ERROR_SYSCALL\n")); + return EINTR; + case SSL_ERROR_SSL: + //d(printf ("ssl_errno: SSL_ERROR_SSL <-- very useful error...riiiiight\n")); + return EINTR; + default: + //d(printf ("ssl_errno: default error\n")); + return EINTR; + } +} + +static rfbBool +InitializeTLS(void) +{ + int i; + + if (rfbTLSInitialized) return TRUE; + + mutex_buf = malloc(CRYPTO_num_locks() * sizeof(pthread_mutex_t)); + if (mutex_buf == NULL) { + rfbClientLog("Failed to initialized OpenSSL: memory.\n"); + return (-1); + } + + for (i = 0; i < CRYPTO_num_locks(); i++) + pthread_mutex_init(&mutex_buf[i], NULL); + + CRYPTO_set_locking_callback(locking_function); + CRYPTO_set_id_callback(id_function); + CRYPTO_set_dynlock_create_callback(dyn_create_function); + CRYPTO_set_dynlock_lock_callback(dyn_lock_function); + CRYPTO_set_dynlock_destroy_callback(dyn_destroy_function); + SSL_load_error_strings(); + SSLeay_add_ssl_algorithms(); + RAND_load_file("/dev/urandom", 1024); + + rfbClientLog("OpenSSL initialized.\n"); + rfbTLSInitialized = TRUE; + return TRUE; +} + +static int +ssl_verify (int ok, X509_STORE_CTX *ctx) +{ + unsigned char md5sum[16], fingerprint[40], *f; + rfbClient *client; + char *prompt, *cert_str; + int err, i; + unsigned int md5len; + //char buf[257]; + X509 *cert; + SSL *ssl; + + if (ok) + return TRUE; + + ssl = X509_STORE_CTX_get_ex_data (ctx, SSL_get_ex_data_X509_STORE_CTX_idx ()); + + client = SSL_CTX_get_app_data (ssl->ctx); + + cert = X509_STORE_CTX_get_current_cert (ctx); + err = X509_STORE_CTX_get_error (ctx); + + /* calculate the MD5 hash of the raw certificate */ + md5len = sizeof (md5sum); + X509_digest (cert, EVP_md5 (), md5sum, &md5len); + for (i = 0, f = fingerprint; i < 16; i++, f += 3) + sprintf ((char *) f, "%.2x%c", md5sum[i], i != 15 ? ':' : '\0'); + +#define GET_STRING(name) X509_NAME_oneline (name, buf, 256) + + /* TODO: Don't just ignore certificate checks + + fingerprint = key to check in db + + GET_STRING (X509_get_issuer_name (cert)); + GET_STRING (X509_get_subject_name (cert)); + cert->valid (bool: GOOD or BAD) */ + + ok = TRUE; + + return ok; +} + +static int sock_read_ready(SSL *ssl, uint32_t ms) +{ + int r = 0; + fd_set fds; + struct timeval tv; + + FD_ZERO(&fds); + + FD_SET(SSL_get_fd(ssl), &fds); + + tv.tv_sec = ms / 1000; + tv.tv_usec = (ms % 1000) * ms; + + r = select (SSL_get_fd(ssl) + 1, &fds, NULL, NULL, &tv); + + return r; +} + +static int wait_for_data(SSL *ssl, int ret, int timeout) +{ + struct timeval tv; + fd_set fds; + int err; + int retval = 1; + + err = SSL_get_error(ssl, ret); + + switch(err) + { + case SSL_ERROR_WANT_READ: + case SSL_ERROR_WANT_WRITE: + ret = sock_read_ready(ssl, timeout*1000); + + if (ret == -1) { + retval = 2; + } + + break; + default: + retval = 3; + break; + } + + ERR_clear_error(); + + return retval; +} + +static SSL * +open_ssl_connection (rfbClient *client, int sockfd, rfbBool anonTLS) +{ + SSL_CTX *ssl_ctx = NULL; + SSL *ssl = NULL; + int n, finished = 0; + BIO *sbio; + + ssl_ctx = SSL_CTX_new (SSLv23_client_method ()); + SSL_CTX_set_default_verify_paths (ssl_ctx); + SSL_CTX_set_verify (ssl_ctx, SSL_VERIFY_NONE, &ssl_verify); + ssl = SSL_new (ssl_ctx); + + /* TODO: finetune this list, take into account anonTLS bool */ + SSL_set_cipher_list(ssl, "ALL"); + + SSL_set_fd (ssl, sockfd); + SSL_CTX_set_app_data (ssl_ctx, client); + + do + { + n = SSL_connect(ssl); + + if (n != 1) + { + if (wait_for_data(ssl, n, 1) != 1) + { + finished = 1; + if (ssl->ctx) + SSL_CTX_free (ssl->ctx); + SSL_free(ssl); + SSL_shutdown (ssl); + + return NULL; + } + } + } while( n != 1 && finished != 1 ); + + return ssl; +} + + +static rfbBool +InitializeTLSSession(rfbClient* client, rfbBool anonTLS) +{ + int ret; + + if (client->tlsSession) return TRUE; + + client->tlsSession = open_ssl_connection (client, client->sock, anonTLS); + + if (!client->tlsSession) + return FALSE; + + rfbClientLog("TLS session initialized.\n"); + + return TRUE; +} + +static rfbBool +SetTLSAnonCredential(rfbClient* client) +{ + rfbClientLog("TLS anonymous credential created.\n"); + return TRUE; +} + +static rfbBool +HandshakeTLS(rfbClient* client) +{ + int timeout = 15; + int ret; + +return TRUE; + + while (timeout > 0 && (ret = SSL_do_handshake(client->tlsSession)) < 0) + { + if (ret != -1) + { + rfbClientLog("TLS handshake blocking.\n"); + sleep(1); + timeout--; + continue; + } + rfbClientLog("TLS handshake failed: -.\n"); + FreeTLS(client); + return FALSE; + } + + if (timeout <= 0) + { + rfbClientLog("TLS handshake timeout.\n"); + FreeTLS(client); + return FALSE; + } + + rfbClientLog("TLS handshake done.\n"); + return TRUE; +} + +/* VeNCrypt sub auth. 1 byte auth count, followed by count * 4 byte integers */ +static rfbBool +ReadVeNCryptSecurityType(rfbClient* client, uint32_t *result) +{ + uint8_t count=0; + uint8_t loop=0; + uint8_t flag=0; + uint32_t tAuth[256], t; + char buf1[500],buf2[10]; + uint32_t authScheme; + + if (!ReadFromRFBServer(client, (char *)&count, 1)) return FALSE; + + if (count==0) + { + rfbClientLog("List of security types is ZERO. Giving up.\n"); + return FALSE; + } + + if (count>sizeof(tAuth)) + { + rfbClientLog("%d security types are too many; maximum is %d\n", count, sizeof(tAuth)); + return FALSE; + } + + rfbClientLog("We have %d security types to read\n", count); + authScheme=0; + /* now, we have a list of available security types to read ( uint8_t[] ) */ + for (loop=0;loop=sizeof(buf1)-1) break; + snprintf(buf2, sizeof(buf2), (loop>0 ? ", %d" : "%d"), (int)tAuth[loop]); + strncat(buf1, buf2, sizeof(buf1)-strlen(buf1)-1); + } + rfbClientLog("Unknown VeNCrypt authentication scheme from VNC server: %s\n", + buf1); + return FALSE; + } + *result = authScheme; + return TRUE; +} + +rfbBool +HandleAnonTLSAuth(rfbClient* client) +{ + if (!InitializeTLS() || !InitializeTLSSession(client, TRUE)) return FALSE; + + if (!SetTLSAnonCredential(client)) return FALSE; + + if (!HandshakeTLS(client)) return FALSE; + + return TRUE; +} + +rfbBool +HandleVeNCryptAuth(rfbClient* client) +{ + uint8_t major, minor, status; + uint32_t authScheme; + rfbBool anonTLS; +// gnutls_certificate_credentials_t x509_cred = NULL; + int ret; + + if (!InitializeTLS()) return FALSE; + + /* Read VeNCrypt version */ + if (!ReadFromRFBServer(client, (char *)&major, 1) || + !ReadFromRFBServer(client, (char *)&minor, 1)) + { + return FALSE; + } + rfbClientLog("Got VeNCrypt version %d.%d from server.\n", (int)major, (int)minor); + + if (major != 0 && minor != 2) + { + rfbClientLog("Unsupported VeNCrypt version.\n"); + return FALSE; + } + + if (!WriteToRFBServer(client, (char *)&major, 1) || + !WriteToRFBServer(client, (char *)&minor, 1) || + !ReadFromRFBServer(client, (char *)&status, 1)) + { + return FALSE; + } + + if (status != 0) + { + rfbClientLog("Server refused VeNCrypt version %d.%d.\n", (int)major, (int)minor); + return FALSE; + } + + if (!ReadVeNCryptSecurityType(client, &authScheme)) return FALSE; + if (!ReadFromRFBServer(client, (char *)&status, 1) || status != 1) + { + rfbClientLog("Server refused VeNCrypt authentication %d (%d).\n", authScheme, (int)status); + return FALSE; + } + client->subAuthScheme = authScheme; + + /* Some VeNCrypt security types are anonymous TLS, others are X509 */ + switch (authScheme) + { + case rfbVeNCryptTLSNone: + case rfbVeNCryptTLSVNC: + case rfbVeNCryptTLSPlain: + anonTLS = TRUE; + break; + default: + anonTLS = FALSE; + break; + } + + /* Get X509 Credentials if it's not anonymous */ + if (!anonTLS) + { + rfbCredential *cred; + + if (!client->GetCredential) + { + rfbClientLog("GetCredential callback is not set.\n"); + return FALSE; + } + cred = client->GetCredential(client, rfbCredentialTypeX509); + if (!cred) + { + rfbClientLog("Reading credential failed\n"); + return FALSE; + } + + /* TODO: don't just ignore this + x509_cred = CreateX509CertCredential(cred); + FreeX509Credential(cred); + if (!x509_cred) return FALSE; */ + } + + /* Start up the TLS session */ + if (!InitializeTLSSession(client, anonTLS)) return FALSE; + + if (anonTLS) + { + if (!SetTLSAnonCredential(client)) return FALSE; + } + else + { +/* TODO: don't just ignore this + if ((ret = gnutls_credentials_set(client->tlsSession, GNUTLS_CRD_CERTIFICATE, x509_cred)) < 0) + { + rfbClientLog("Cannot set x509 credential: %s.\n", gnutls_strerror(ret)); + FreeTLS(client); */ + return FALSE; + // } + } + + if (!HandshakeTLS(client)) return FALSE; + + /* TODO: validate certificate */ + + /* We are done here. The caller should continue with client->subAuthScheme + * to do actual sub authentication. + */ + return TRUE; +} + +int +ReadFromTLS(rfbClient* client, char *out, unsigned int n) +{ + ssize_t ret; + + ret = SSL_read (client->tlsSession, out, n); + + if (ret >= 0) + return ret; + else { + errno = ssl_errno (client->tlsSession, ret); + + if (errno != EAGAIN) { + rfbClientLog("Error reading from TLS: -.\n"); + } + } + + return -1; +} + +int +WriteToTLS(rfbClient* client, char *buf, unsigned int n) +{ + unsigned int offset = 0; + ssize_t ret; + + while (offset < n) + { + + ret = SSL_write (client->tlsSession, buf + offset, (size_t)(n-offset)); + + if (ret < 0) + errno = ssl_errno (client->tlsSession, ret); + + if (ret == 0) continue; + if (ret < 0) + { + if (errno == EAGAIN || errno == EWOULDBLOCK) continue; + rfbClientLog("Error writing to TLS: -\n"); + return -1; + } + offset += (unsigned int)ret; + } + return offset; +} + +void FreeTLS(rfbClient* client) +{ + int i; + + if (mutex_buf != NULL) { + CRYPTO_set_dynlock_create_callback(NULL); + CRYPTO_set_dynlock_lock_callback(NULL); + CRYPTO_set_dynlock_destroy_callback(NULL); + + CRYPTO_set_locking_callback(NULL); + CRYPTO_set_id_callback(NULL); + + for (i = 0; i < CRYPTO_num_locks(); i++) + pthread_mutex_destroy(&mutex_buf[i]); + free(mutex_buf); + mutex_buf = NULL; + } + + SSL_free(client->tlsSession); +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/ultra.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/ultra.c new file mode 100644 index 0000000..dac89b5 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/ultra.c @@ -0,0 +1,210 @@ +/* + * Copyright (C) 2000 Tridia Corporation. All Rights Reserved. + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * ultrazip.c - handle ultrazip encoding. + * + * This file shouldn't be compiled directly. It is included multiple times by + * rfbproto.c, each time with a different definition of the macro BPP. For + * each value of BPP, this file defines a function which handles an zlib + * encoded rectangle with BPP bits per pixel. + */ + +#define HandleUltraZipBPP CONCAT2E(HandleUltraZip,BPP) +#define HandleUltraBPP CONCAT2E(HandleUltra,BPP) +#define CARDBPP CONCAT3E(uint,BPP,_t) + +static rfbBool +HandleUltraBPP (rfbClient* client, int rx, int ry, int rw, int rh) +{ + rfbZlibHeader hdr; + int toRead=0; + int inflateResult=0; + lzo_uint uncompressedBytes = (( rw * rh ) * ( BPP / 8 )); + + if (!ReadFromRFBServer(client, (char *)&hdr, sz_rfbZlibHeader)) + return FALSE; + + toRead = rfbClientSwap32IfLE(hdr.nBytes); + if (toRead==0) return TRUE; + + if (uncompressedBytes==0) + { + rfbClientLog("ultra error: rectangle has 0 uncomressed bytes ((%dw * %dh) * (%d / 8))\n", rw, rh, BPP); + return FALSE; + } + + /* First make sure we have a large enough raw buffer to hold the + * decompressed data. In practice, with a fixed BPP, fixed frame + * buffer size and the first update containing the entire frame + * buffer, this buffer allocation should only happen once, on the + * first update. + */ + if ( client->raw_buffer_size < (int)uncompressedBytes) { + if ( client->raw_buffer != NULL ) { + free( client->raw_buffer ); + } + client->raw_buffer_size = uncompressedBytes; + /* buffer needs to be aligned on 4-byte boundaries */ + if ((client->raw_buffer_size % 4)!=0) + client->raw_buffer_size += (4-(client->raw_buffer_size % 4)); + client->raw_buffer = (char*) malloc( client->raw_buffer_size ); + } + + /* allocate enough space to store the incoming compressed packet */ + if ( client->ultra_buffer_size < toRead ) { + if ( client->ultra_buffer != NULL ) { + free( client->ultra_buffer ); + } + client->ultra_buffer_size = toRead; + /* buffer needs to be aligned on 4-byte boundaries */ + if ((client->ultra_buffer_size % 4)!=0) + client->ultra_buffer_size += (4-(client->ultra_buffer_size % 4)); + client->ultra_buffer = (char*) malloc( client->ultra_buffer_size ); + } + + /* Fill the buffer, obtaining data from the server. */ + if (!ReadFromRFBServer(client, client->ultra_buffer, toRead)) + return FALSE; + + /* uncompress the data */ + uncompressedBytes = client->raw_buffer_size; + inflateResult = lzo1x_decompress( + (lzo_byte *)client->ultra_buffer, toRead, + (lzo_byte *)client->raw_buffer, (lzo_uintp) &uncompressedBytes, + NULL); + + + if ((rw * rh * (BPP / 8)) != uncompressedBytes) + rfbClientLog("Ultra decompressed too little (%d < %d)", (rw * rh * (BPP / 8)), uncompressedBytes); + + /* Put the uncompressed contents of the update on the screen. */ + if ( inflateResult == LZO_E_OK ) + { + CopyRectangle(client, (unsigned char *)client->raw_buffer, rx, ry, rw, rh); + } + else + { + rfbClientLog("ultra decompress returned error: %d\n", + inflateResult); + return FALSE; + } + return TRUE; +} + + +/* UltraZip is like rre in that it is composed of subrects */ +static rfbBool +HandleUltraZipBPP (rfbClient* client, int rx, int ry, int rw, int rh) +{ + rfbZlibHeader hdr; + int i=0; + int toRead=0; + int inflateResult=0; + unsigned char *ptr=NULL; + lzo_uint uncompressedBytes = ry + (rw * 65535); + unsigned int numCacheRects = rx; + + if (!ReadFromRFBServer(client, (char *)&hdr, sz_rfbZlibHeader)) + return FALSE; + + toRead = rfbClientSwap32IfLE(hdr.nBytes); + + if (toRead==0) return TRUE; + + if (uncompressedBytes==0) + { + rfbClientLog("ultrazip error: rectangle has 0 uncomressed bytes (%dy + (%dw * 65535)) (%d rectangles)\n", ry, rw, rx); + return FALSE; + } + + /* First make sure we have a large enough raw buffer to hold the + * decompressed data. In practice, with a fixed BPP, fixed frame + * buffer size and the first update containing the entire frame + * buffer, this buffer allocation should only happen once, on the + * first update. + */ + if ( client->raw_buffer_size < (int)(uncompressedBytes + 500)) { + if ( client->raw_buffer != NULL ) { + free( client->raw_buffer ); + } + client->raw_buffer_size = uncompressedBytes + 500; + /* buffer needs to be aligned on 4-byte boundaries */ + if ((client->raw_buffer_size % 4)!=0) + client->raw_buffer_size += (4-(client->raw_buffer_size % 4)); + client->raw_buffer = (char*) malloc( client->raw_buffer_size ); + } + + + /* allocate enough space to store the incoming compressed packet */ + if ( client->ultra_buffer_size < toRead ) { + if ( client->ultra_buffer != NULL ) { + free( client->ultra_buffer ); + } + client->ultra_buffer_size = toRead; + client->ultra_buffer = (char*) malloc( client->ultra_buffer_size ); + } + + /* Fill the buffer, obtaining data from the server. */ + if (!ReadFromRFBServer(client, client->ultra_buffer, toRead)) + return FALSE; + + /* uncompress the data */ + uncompressedBytes = client->raw_buffer_size; + inflateResult = lzo1x_decompress( + (lzo_byte *)client->ultra_buffer, toRead, + (lzo_byte *)client->raw_buffer, &uncompressedBytes, NULL); + if ( inflateResult != LZO_E_OK ) + { + rfbClientLog("ultra decompress returned error: %d\n", + inflateResult); + return FALSE; + } + + /* Put the uncompressed contents of the update on the screen. */ + ptr = (unsigned char *)client->raw_buffer; + for (i=0; i +#include +#include +#include +#include +#include "tls.h" + +static void Dummy(rfbClient* client) { +} +static rfbBool DummyPoint(rfbClient* client, int x, int y) { + return TRUE; +} +static void DummyRect(rfbClient* client, int x, int y, int w, int h) { +} + +#ifdef __MINGW32__ +static char* NoPassword(rfbClient* client) { + return strdup(""); +} +#undef SOCKET +#include +#define close closesocket +#else +#include +#include +#endif + +static char* ReadPassword(rfbClient* client) { +#ifdef __MINGW32__ + /* FIXME */ + rfbClientErr("ReadPassword on MinGW32 NOT IMPLEMENTED\n"); + return NoPassword(client); +#else + int i; + char* p=malloc(9); + struct termios save,noecho; + p[0]=0; + if(tcgetattr(fileno(stdin),&save)!=0) return p; + noecho=save; noecho.c_lflag &= ~ECHO; + if(tcsetattr(fileno(stdin),TCSAFLUSH,&noecho)!=0) return p; + fprintf(stderr,"Password: "); + i=0; + while(1) { + int c=fgetc(stdin); + if(c=='\n') + break; + if(i<8) { + p[i]=c; + i++; + p[i]=0; + } + } + tcsetattr(fileno(stdin),TCSAFLUSH,&save); + return p; +#endif +} +static rfbBool MallocFrameBuffer(rfbClient* client) { + if(client->frameBuffer) + free(client->frameBuffer); + client->frameBuffer=malloc(client->width*client->height*client->format.bitsPerPixel/8); + return client->frameBuffer?TRUE:FALSE; +} + +static void initAppData(AppData* data) { + data->shareDesktop=TRUE; + data->viewOnly=FALSE; + data->encodingsString="tight zrle ultra copyrect hextile zlib corre rre raw"; + data->useBGR233=FALSE; + data->nColours=0; + data->forceOwnCmap=FALSE; + data->forceTrueColour=FALSE; + data->requestedDepth=0; + data->compressLevel=3; + data->qualityLevel=5; +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + data->enableJPEG=TRUE; +#else + data->enableJPEG=FALSE; +#endif + data->useRemoteCursor=FALSE; +} + +rfbClient* rfbGetClient(int bitsPerSample,int samplesPerPixel, + int bytesPerPixel) { + rfbClient* client=(rfbClient*)calloc(sizeof(rfbClient),1); + if(!client) { + rfbClientErr("Couldn't allocate client structure!\n"); + return NULL; + } + initAppData(&client->appData); + client->endianTest = 1; + client->programName=""; + client->serverHost=strdup(""); + client->serverPort=5900; + + client->destHost = NULL; + client->destPort = 5900; + + client->CurrentKeyboardLedState = 0; + client->HandleKeyboardLedState = (HandleKeyboardLedStateProc)DummyPoint; + + /* default: use complete frame buffer */ + client->updateRect.x = -1; + + client->format.bitsPerPixel = bytesPerPixel*8; + client->format.depth = bitsPerSample*samplesPerPixel; + client->appData.requestedDepth=client->format.depth; + client->format.bigEndian = *(char *)&client->endianTest?FALSE:TRUE; + client->format.trueColour = TRUE; + + if (client->format.bitsPerPixel == 8) { + client->format.redMax = 7; + client->format.greenMax = 7; + client->format.blueMax = 3; + client->format.redShift = 0; + client->format.greenShift = 3; + client->format.blueShift = 6; + } else { + client->format.redMax = (1 << bitsPerSample) - 1; + client->format.greenMax = (1 << bitsPerSample) - 1; + client->format.blueMax = (1 << bitsPerSample) - 1; + if(!client->format.bigEndian) { + client->format.redShift = 0; + client->format.greenShift = bitsPerSample; + client->format.blueShift = bitsPerSample * 2; + } else { + if(client->format.bitsPerPixel==8*3) { + client->format.redShift = bitsPerSample*2; + client->format.greenShift = bitsPerSample*1; + client->format.blueShift = 0; + } else { + client->format.redShift = bitsPerSample*3; + client->format.greenShift = bitsPerSample*2; + client->format.blueShift = bitsPerSample; + } + } + } + + client->bufoutptr=client->buf; + client->buffered=0; + +#ifdef LIBVNCSERVER_HAVE_LIBZ + client->raw_buffer_size = -1; + client->decompStreamInited = FALSE; + +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + memset(client->zlibStreamActive,0,sizeof(rfbBool)*4); + client->jpegSrcManager = NULL; +#endif +#endif + + client->HandleCursorPos = DummyPoint; + client->SoftCursorLockArea = DummyRect; + client->SoftCursorUnlockScreen = Dummy; + client->GotFrameBufferUpdate = DummyRect; + client->FinishedFrameBufferUpdate = NULL; + client->GetPassword = ReadPassword; + client->MallocFrameBuffer = MallocFrameBuffer; + client->Bell = Dummy; + client->CurrentKeyboardLedState = 0; + client->HandleKeyboardLedState = (HandleKeyboardLedStateProc)DummyPoint; + client->QoS_DSCP = 0; + + client->authScheme = 0; + client->subAuthScheme = 0; + client->GetCredential = NULL; + client->tlsSession = NULL; + client->sock = -1; + client->listenSock = -1; + client->listenAddress = NULL; + client->listen6Sock = -1; + client->listen6Address = NULL; + client->clientAuthSchemes = NULL; + return client; +} + +static rfbBool rfbInitConnection(rfbClient* client) +{ + /* Unless we accepted an incoming connection, make a TCP connection to the + given VNC server */ + + if (!client->listenSpecified) { + if (!client->serverHost) + return FALSE; + if (client->destHost) { + if (!ConnectToRFBRepeater(client,client->serverHost,client->serverPort,client->destHost,client->destPort)) + return FALSE; + } else { + if (!ConnectToRFBServer(client,client->serverHost,client->serverPort)) + return FALSE; + } + } + + /* Initialise the VNC connection, including reading the password */ + + if (!InitialiseRFBConnection(client)) + return FALSE; + + client->width=client->si.framebufferWidth; + client->height=client->si.framebufferHeight; + client->MallocFrameBuffer(client); + + if (!SetFormatAndEncodings(client)) + return FALSE; + + if (client->updateRect.x < 0) { + client->updateRect.x = client->updateRect.y = 0; + client->updateRect.w = client->width; + client->updateRect.h = client->height; + } + + if (client->appData.scaleSetting>1) + { + if (!SendScaleSetting(client, client->appData.scaleSetting)) + return FALSE; + if (!SendFramebufferUpdateRequest(client, + client->updateRect.x / client->appData.scaleSetting, + client->updateRect.y / client->appData.scaleSetting, + client->updateRect.w / client->appData.scaleSetting, + client->updateRect.h / client->appData.scaleSetting, + FALSE)) + return FALSE; + } + else + { + if (!SendFramebufferUpdateRequest(client, + client->updateRect.x, client->updateRect.y, + client->updateRect.w, client->updateRect.h, + FALSE)) + return FALSE; + } + + return TRUE; +} + +rfbBool rfbInitClient(rfbClient* client,int* argc,char** argv) { + int i,j; + + if(argv && argc && *argc) { + if(client->programName==0) + client->programName=argv[0]; + + for (i = 1; i < *argc; i++) { + j = i; + if (strcmp(argv[i], "-listen") == 0) { + listenForIncomingConnections(client); + break; + } else if (strcmp(argv[i], "-listennofork") == 0) { + listenForIncomingConnectionsNoFork(client, -1); + break; + } else if (strcmp(argv[i], "-play") == 0) { + client->serverPort = -1; + j++; + } else if (i+1<*argc && strcmp(argv[i], "-encodings") == 0) { + client->appData.encodingsString = argv[i+1]; + j+=2; + } else if (i+1<*argc && strcmp(argv[i], "-compress") == 0) { + client->appData.compressLevel = atoi(argv[i+1]); + j+=2; + } else if (i+1<*argc && strcmp(argv[i], "-quality") == 0) { + client->appData.qualityLevel = atoi(argv[i+1]); + j+=2; + } else if (i+1<*argc && strcmp(argv[i], "-scale") == 0) { + client->appData.scaleSetting = atoi(argv[i+1]); + j+=2; + } else if (i+1<*argc && strcmp(argv[i], "-qosdscp") == 0) { + client->QoS_DSCP = atoi(argv[i+1]); + j+=2; + } else if (i+1<*argc && strcmp(argv[i], "-repeaterdest") == 0) { + char* colon=strchr(argv[i+1],':'); + + if(client->destHost) + free(client->destHost); + client->destPort = 5900; + + client->destHost = strdup(argv[i+1]); + if(colon) { + client->destHost[(int)(colon-argv[i+1])] = '\0'; + client->destPort = atoi(colon+1); + } + j+=2; + } else { + char* colon=strchr(argv[i],':'); + + if(client->serverHost) + free(client->serverHost); + + if(colon) { + client->serverHost = strdup(argv[i]); + client->serverHost[(int)(colon-argv[i])] = '\0'; + client->serverPort = atoi(colon+1); + } else { + client->serverHost = strdup(argv[i]); + } + if(client->serverPort >= 0 && client->serverPort < 5900) + client->serverPort += 5900; + } + /* purge arguments */ + if (j>i) { + *argc-=j-i; + memmove(argv+i,argv+j,(*argc-i)*sizeof(char*)); + i--; + } + } + } + + if(!rfbInitConnection(client)) { + rfbClientCleanup(client); + return FALSE; + } + + return TRUE; +} + +void rfbClientCleanup(rfbClient* client) { +#ifdef LIBVNCSERVER_HAVE_LIBZ +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + int i; + + for ( i = 0; i < 4; i++ ) { + if (client->zlibStreamActive[i] == TRUE ) { + if (inflateEnd (&client->zlibStream[i]) != Z_OK && + client->zlibStream[i].msg != NULL) + rfbClientLog("inflateEnd: %s\n", client->zlibStream[i].msg); + } + } + + if ( client->decompStreamInited == TRUE ) { + if (inflateEnd (&client->decompStream) != Z_OK && + client->decompStream.msg != NULL) + rfbClientLog("inflateEnd: %s\n", client->decompStream.msg ); + } + + if (client->jpegSrcManager) + free(client->jpegSrcManager); +#endif +#endif + + FreeTLS(client); + + if (client->sock >= 0) + close(client->sock); + if (client->listenSock >= 0) + close(client->listenSock); + free(client->desktopName); + free(client->serverHost); + if (client->destHost) + free(client->destHost); + if (client->clientAuthSchemes) + free(client->clientAuthSchemes); + free(client); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/zlib.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/zlib.c new file mode 100644 index 0000000..e872d40 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/zlib.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2000 Tridia Corporation. All Rights Reserved. + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#ifdef LIBVNCSERVER_HAVE_LIBZ + +/* + * zlib.c - handle zlib encoding. + * + * This file shouldn't be compiled directly. It is included multiple times by + * rfbproto.c, each time with a different definition of the macro BPP. For + * each value of BPP, this file defines a function which handles an zlib + * encoded rectangle with BPP bits per pixel. + */ + +#define HandleZlibBPP CONCAT2E(HandleZlib,BPP) +#define CARDBPP CONCAT3E(uint,BPP,_t) + +static rfbBool +HandleZlibBPP (rfbClient* client, int rx, int ry, int rw, int rh) +{ + rfbZlibHeader hdr; + int remaining; + int inflateResult; + int toRead; + + /* First make sure we have a large enough raw buffer to hold the + * decompressed data. In practice, with a fixed BPP, fixed frame + * buffer size and the first update containing the entire frame + * buffer, this buffer allocation should only happen once, on the + * first update. + */ + if ( client->raw_buffer_size < (( rw * rh ) * ( BPP / 8 ))) { + + if ( client->raw_buffer != NULL ) { + + free( client->raw_buffer ); + + } + + client->raw_buffer_size = (( rw * rh ) * ( BPP / 8 )); + client->raw_buffer = (char*) malloc( client->raw_buffer_size ); + + } + + if (!ReadFromRFBServer(client, (char *)&hdr, sz_rfbZlibHeader)) + return FALSE; + + remaining = rfbClientSwap32IfLE(hdr.nBytes); + + /* Need to initialize the decompressor state. */ + client->decompStream.next_in = ( Bytef * )client->buffer; + client->decompStream.avail_in = 0; + client->decompStream.next_out = ( Bytef * )client->raw_buffer; + client->decompStream.avail_out = client->raw_buffer_size; + client->decompStream.data_type = Z_BINARY; + + /* Initialize the decompression stream structures on the first invocation. */ + if ( client->decompStreamInited == FALSE ) { + + inflateResult = inflateInit( &client->decompStream ); + + if ( inflateResult != Z_OK ) { + rfbClientLog( + "inflateInit returned error: %d, msg: %s\n", + inflateResult, + client->decompStream.msg); + return FALSE; + } + + client->decompStreamInited = TRUE; + + } + + inflateResult = Z_OK; + + /* Process buffer full of data until no more to process, or + * some type of inflater error, or Z_STREAM_END. + */ + while (( remaining > 0 ) && + ( inflateResult == Z_OK )) { + + if ( remaining > RFB_BUFFER_SIZE ) { + toRead = RFB_BUFFER_SIZE; + } + else { + toRead = remaining; + } + + /* Fill the buffer, obtaining data from the server. */ + if (!ReadFromRFBServer(client, client->buffer,toRead)) + return FALSE; + + client->decompStream.next_in = ( Bytef * )client->buffer; + client->decompStream.avail_in = toRead; + + /* Need to uncompress buffer full. */ + inflateResult = inflate( &client->decompStream, Z_SYNC_FLUSH ); + + /* We never supply a dictionary for compression. */ + if ( inflateResult == Z_NEED_DICT ) { + rfbClientLog("zlib inflate needs a dictionary!\n"); + return FALSE; + } + if ( inflateResult < 0 ) { + rfbClientLog( + "zlib inflate returned error: %d, msg: %s\n", + inflateResult, + client->decompStream.msg); + return FALSE; + } + + /* Result buffer allocated to be at least large enough. We should + * never run out of space! + */ + if (( client->decompStream.avail_in > 0 ) && + ( client->decompStream.avail_out <= 0 )) { + rfbClientLog("zlib inflate ran out of space!\n"); + return FALSE; + } + + remaining -= toRead; + + } /* while ( remaining > 0 ) */ + + if ( inflateResult == Z_OK ) { + + /* Put the uncompressed contents of the update on the screen. */ + CopyRectangle(client, (uint8_t *)client->raw_buffer, rx, ry, rw, rh); + } + else { + + rfbClientLog( + "zlib inflate returned error: %d, msg: %s\n", + inflateResult, + client->decompStream.msg); + return FALSE; + + } + + return TRUE; +} + +#undef CARDBPP + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncclient/zrle.c b/jni/vnc/LibVNCServer-0.9.9/libvncclient/zrle.c new file mode 100644 index 0000000..a14ad44 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncclient/zrle.c @@ -0,0 +1,427 @@ +/* + * Copyright (C) 2005 Johannes E. Schindelin. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#ifdef LIBVNCSERVER_HAVE_LIBZ + +/* + * zrle.c - handle zrle encoding. + * + * This file shouldn't be compiled directly. It is included multiple times by + * rfbproto.c, each time with a different definition of the macro BPP. For + * each value of BPP, this file defines a function which handles an zrle + * encoded rectangle with BPP bits per pixel. + */ + +#ifndef REALBPP +#define REALBPP BPP +#endif + +#if !defined(UNCOMP) || UNCOMP==0 +#define HandleZRLE CONCAT2E(HandleZRLE,REALBPP) +#define HandleZRLETile CONCAT2E(HandleZRLETile,REALBPP) +#elif UNCOMP>0 +#define HandleZRLE CONCAT3E(HandleZRLE,REALBPP,Down) +#define HandleZRLETile CONCAT3E(HandleZRLETile,REALBPP,Down) +#else +#define HandleZRLE CONCAT3E(HandleZRLE,REALBPP,Up) +#define HandleZRLETile CONCAT3E(HandleZRLETile,REALBPP,Up) +#endif +#define CARDBPP CONCAT3E(uint,BPP,_t) +#define CARDREALBPP CONCAT3E(uint,REALBPP,_t) + +#define ENDIAN_LITTLE 0 +#define ENDIAN_BIG 1 +#define ENDIAN_NO 2 +#define ZYWRLE_ENDIAN ENDIAN_LITTLE +#undef END_FIX +#if ZYWRLE_ENDIAN == ENDIAN_LITTLE +# define END_FIX LE +#elif ZYWRLE_ENDIAN == ENDIAN_BIG +# define END_FIX BE +#else +# define END_FIX NE +#endif +#define __RFB_CONCAT3E(a,b,c) CONCAT3E(a,b,c) +#define __RFB_CONCAT2E(a,b) CONCAT2E(a,b) +#undef CPIXEL +#if REALBPP != BPP +#if UNCOMP == 0 +#define CPIXEL REALBPP +#elif UNCOMP>0 +#define CPIXEL CONCAT2E(REALBPP,Down) +#else +#define CPIXEL CONCAT2E(REALBPP,Up) +#endif +#endif +#define PIXEL_T __RFB_CONCAT3E(uint,BPP,_t) +#if BPP!=8 +#define ZYWRLE_DECODE 1 +#include "zywrletemplate.c" +#endif +#undef CPIXEL + +static int HandleZRLETile(rfbClient* client, + uint8_t* buffer,size_t buffer_length, + int x,int y,int w,int h); + +static rfbBool +HandleZRLE (rfbClient* client, int rx, int ry, int rw, int rh) +{ + rfbZRLEHeader header; + int remaining; + int inflateResult; + int toRead; + int min_buffer_size = rw * rh * (REALBPP / 8) * 2; + + /* First make sure we have a large enough raw buffer to hold the + * decompressed data. In practice, with a fixed REALBPP, fixed frame + * buffer size and the first update containing the entire frame + * buffer, this buffer allocation should only happen once, on the + * first update. + */ + if ( client->raw_buffer_size < min_buffer_size) { + + if ( client->raw_buffer != NULL ) { + + free( client->raw_buffer ); + + } + + client->raw_buffer_size = min_buffer_size; + client->raw_buffer = (char*) malloc( client->raw_buffer_size ); + + } + + if (!ReadFromRFBServer(client, (char *)&header, sz_rfbZRLEHeader)) + return FALSE; + + remaining = rfbClientSwap32IfLE(header.length); + + /* Need to initialize the decompressor state. */ + client->decompStream.next_in = ( Bytef * )client->buffer; + client->decompStream.avail_in = 0; + client->decompStream.next_out = ( Bytef * )client->raw_buffer; + client->decompStream.avail_out = client->raw_buffer_size; + client->decompStream.data_type = Z_BINARY; + + /* Initialize the decompression stream structures on the first invocation. */ + if ( client->decompStreamInited == FALSE ) { + + inflateResult = inflateInit( &client->decompStream ); + + if ( inflateResult != Z_OK ) { + rfbClientLog( + "inflateInit returned error: %d, msg: %s\n", + inflateResult, + client->decompStream.msg); + return FALSE; + } + + client->decompStreamInited = TRUE; + + } + + inflateResult = Z_OK; + + /* Process buffer full of data until no more to process, or + * some type of inflater error, or Z_STREAM_END. + */ + while (( remaining > 0 ) && + ( inflateResult == Z_OK )) { + + if ( remaining > RFB_BUFFER_SIZE ) { + toRead = RFB_BUFFER_SIZE; + } + else { + toRead = remaining; + } + + /* Fill the buffer, obtaining data from the server. */ + if (!ReadFromRFBServer(client, client->buffer,toRead)) + return FALSE; + + client->decompStream.next_in = ( Bytef * )client->buffer; + client->decompStream.avail_in = toRead; + + /* Need to uncompress buffer full. */ + inflateResult = inflate( &client->decompStream, Z_SYNC_FLUSH ); + + /* We never supply a dictionary for compression. */ + if ( inflateResult == Z_NEED_DICT ) { + rfbClientLog("zlib inflate needs a dictionary!\n"); + return FALSE; + } + if ( inflateResult < 0 ) { + rfbClientLog( + "zlib inflate returned error: %d, msg: %s\n", + inflateResult, + client->decompStream.msg); + return FALSE; + } + + /* Result buffer allocated to be at least large enough. We should + * never run out of space! + */ + if (( client->decompStream.avail_in > 0 ) && + ( client->decompStream.avail_out <= 0 )) { + rfbClientLog("zlib inflate ran out of space!\n"); + return FALSE; + } + + remaining -= toRead; + + } /* while ( remaining > 0 ) */ + + if ( inflateResult == Z_OK ) { + void* buf=client->raw_buffer; + int i,j; + + remaining = client->raw_buffer_size-client->decompStream.avail_out; + + for(j=0; jrw)?rw-i:rfbZRLETileWidth; + int subHeight=(j+rfbZRLETileHeight>rh)?rh-j:rfbZRLETileHeight; + int result=HandleZRLETile(client,buf,remaining,rx+i,ry+j,subWidth,subHeight); + + if(result<0) { + rfbClientLog("ZRLE decoding failed (%d)\n",result); +return TRUE; + return FALSE; + } + + buf+=result; + remaining-=result; + } + } + else { + + rfbClientLog( + "zlib inflate returned error: %d, msg: %s\n", + inflateResult, + client->decompStream.msg); + return FALSE; + + } + + return TRUE; +} + +#if REALBPP!=BPP && defined(UNCOMP) && UNCOMP!=0 +#if UNCOMP>0 +#define UncompressCPixel(pointer) ((*(CARDBPP*)pointer)>>UNCOMP) +#else +#define UncompressCPixel(pointer) ((*(CARDBPP*)pointer)<<(-(UNCOMP))) +#endif +#else +#define UncompressCPixel(pointer) (*(CARDBPP*)pointer) +#endif + +static int HandleZRLETile(rfbClient* client, + uint8_t* buffer,size_t buffer_length, + int x,int y,int w,int h) { + uint8_t* buffer_copy = buffer; + uint8_t* buffer_end = buffer+buffer_length; + uint8_t type; +#if BPP!=8 + uint8_t zywrle_level = (client->appData.qualityLevel & 0x80) ? + 0 : (3 - client->appData.qualityLevel / 3); +#endif + + if(buffer_length<1) + return -2; + + type = *buffer; + buffer++; + { + if( type == 0 ) /* raw */ +#if BPP!=8 + if( zywrle_level > 0 ){ + CARDBPP* pFrame = (CARDBPP*)client->frameBuffer + y*client->width+x; + int ret; + client->appData.qualityLevel |= 0x80; + ret = HandleZRLETile(client, buffer, buffer_end-buffer, x, y, w, h); + client->appData.qualityLevel &= 0x7F; + if( ret < 0 ){ + return ret; + } + ZYWRLE_SYNTHESIZE( pFrame, pFrame, w, h, client->width, zywrle_level, (int*)client->zlib_buffer ); + buffer += ret; + }else +#endif + { +#if REALBPP!=BPP + int i,j; + + if(1+w*h*REALBPP/8>buffer_length) { + rfbClientLog("expected %d bytes, got only %d (%dx%d)\n",1+w*h*REALBPP/8,buffer_length,w,h); + return -3; + } + + for(j=y*client->width; j<(y+h)*client->width; j+=client->width) + for(i=x; iframeBuffer)[j+i] = UncompressCPixel(buffer); +#else + CopyRectangle(client, buffer, x, y, w, h); + buffer+=w*h*REALBPP/8; +#endif + } + else if( type == 1 ) /* solid */ + { + CARDBPP color = UncompressCPixel(buffer); + + if(1+REALBPP/8>buffer_length) + return -4; + + FillRectangle(client, x, y, w, h, color); + + buffer+=REALBPP/8; + + } + else if( (type >= 2)&&(type <= 127) ) /* packed Palette */ + { + CARDBPP palette[16]; + int i,j,shift, + bpp=(type>4?(type>16?8:4):(type>2?2:1)), + mask=(1<buffer_length) + return -5; + + /* read palette */ + for(i=0; iwidth; j<(y+h)*client->width; j+=client->width) { + for(i=x,shift=8-bpp; iframeBuffer)[j+i] = palette[((*buffer)>>shift)&mask]; + shift-=bpp; + if(shift<0) { + shift=8-bpp; + buffer++; + } + } + if(shift<8-bpp) + buffer++; + } + + } + /* case 17 ... 127: not used, but valid */ + else if( type == 128 ) /* plain RLE */ + { + int i=0,j=0; + while(jbuffer_end) + return -7; + color = UncompressCPixel(buffer); + buffer+=REALBPP/8; + /* read run length */ + length=1; + while(*buffer==0xff) { + if(buffer+1>=buffer_end) + return -8; + length+=*buffer; + buffer++; + } + length+=*buffer; + buffer++; + while(j0) { + ((CARDBPP*)client->frameBuffer)[(y+j)*client->width+x+i] = color; + length--; + i++; + if(i>=w) { + i=0; + j++; + } + } + if(length>0) + rfbClientLog("Warning: possible ZRLE corruption\n"); + } + + } + else if( type == 129 ) /* unused */ + { + return -8; + } + else if( type >= 130 ) /* palette RLE */ + { + CARDBPP palette[128]; + int i,j; + + if(2+(type-128)*REALBPP/8>buffer_length) + return -9; + + /* read palette */ + for(i=0; i=buffer_end) + return -10; + color = palette[(*buffer)&0x7f]; + length=1; + if(*buffer&0x80) { + if(buffer+1>=buffer_end) + return -11; + buffer++; + /* read run length */ + while(*buffer==0xff) { + if(buffer+1>=buffer_end) + return -8; + length+=*buffer; + buffer++; + } + length+=*buffer; + } + buffer++; + while(j0) { + ((CARDBPP*)client->frameBuffer)[(y+j)*client->width+x+i] = color; + length--; + i++; + if(i>=w) { + i=0; + j++; + } + } + if(length>0) + rfbClientLog("Warning: possible ZRLE corruption\n"); + } + } + } + + return buffer-buffer_copy; +} + +#undef CARDBPP +#undef CARDREALBPP +#undef HandleZRLE +#undef HandleZRLETile +#undef UncompressCPixel +#undef REALBPP + +#endif + +#undef UNCOMP diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver-config.in b/jni/vnc/LibVNCServer-0.9.9/libvncserver-config.in new file mode 100644 index 0000000..ea0bef8 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver-config.in @@ -0,0 +1,78 @@ +#!/bin/sh + +prefix=@prefix@ +exec_prefix=@exec_prefix@ +exec_prefix_set=no +includedir=@includedir@ +libdir=@libdir@ + +# if this script is in the same directory as libvncserver-config.in, assume not installed +if [ -f "`dirname "$0"`/libvncserver-config.in" ]; then + dir="`dirname "$0"`" + prefix="`cd "$dir"; pwd`" + includedir="$prefix" + libdir="$prefix/libvncserver/.libs $prefix/libvncclient/.libs" +fi + +usage="\ +Usage: @PACKAGE@-config [--prefix[=DIR]] [--exec-prefix[=DIR]] [--version] [--link] [--libs] [--cflags]" + +if test $# -eq 0; then + echo "${usage}" 1>&2 + exit 1 +fi + +while test $# -gt 0; do + case "$1" in + -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + case $1 in + --prefix=*) + prefix=$optarg + if test $exec_prefix_set = no ; then + exec_prefix=$optarg + fi + ;; + --prefix) + echo $prefix + ;; + --exec-prefix=*) + exec_prefix=$optarg + exec_prefix_set=yes + ;; + --exec-prefix) + echo $exec_prefix + ;; + --version) + echo @VERSION@ + ;; + --cflags) + if [ "$includedir" != /usr/include ]; then + includes=-I"$includedir" + fi + echo "$includes" + ;; + --libs) + libs="" + for dir in $libdir; do + libs="$libs -L$dir" + if [ "`uname`" = "SunOS" ]; then + # why only Solaris?? + libs="$libs -R$dir" + fi + done + echo "$libs" -lvncserver -lvncclient @LIBS@ @WSOCKLIB@ + ;; + --link) + echo @CC@ + ;; + *) + echo "${usage}" 1>&2 + exit 1 + ;; + esac + shift +done + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver.pc.in b/jni/vnc/LibVNCServer-0.9.9/libvncserver.pc.in new file mode 100644 index 0000000..f9273ea --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver.pc.in @@ -0,0 +1,12 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: LibVNCServer +Description: A library for easy implementation of a VNC server. +Version: @VERSION@ +Requires: +Libs: -L${libdir} -lvncserver @LIBS@ @WSOCKLIB@ +Cflags: -I${includedir} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/Makefile.am b/jni/vnc/LibVNCServer-0.9.9/libvncserver/Makefile.am new file mode 100644 index 0000000..deb0e09 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/Makefile.am @@ -0,0 +1,74 @@ +INCLUDES = -I$(top_srcdir) -I$(top_srcdir)/common + +if WITH_TIGHTVNC_FILETRANSFER +TIGHTVNCFILETRANSFERHDRS=tightvnc-filetransfer/filelistinfo.h \ + tightvnc-filetransfer/filetransfermsg.h \ + tightvnc-filetransfer/handlefiletransferrequest.h \ + tightvnc-filetransfer/rfbtightproto.h + +TIGHTVNCFILETRANSFERSRCS = tightvnc-filetransfer/rfbtightserver.c \ + tightvnc-filetransfer/handlefiletransferrequest.c \ + tightvnc-filetransfer/filetransfermsg.c \ + tightvnc-filetransfer/filelistinfo.c +endif + +if WITH_WEBSOCKETS + +if HAVE_GNUTLS +WEBSOCKETSSSLSRCS = rfbssl_gnutls.c rfbcrypto_gnutls.c +WEBSOCKETSSSLLIBS = @GNUTLS_LIBS@ +else +if HAVE_LIBSSL +WEBSOCKETSSSLSRCS = rfbssl_openssl.c rfbcrypto_openssl.c +WEBSOCKETSSSLLIBS = @SSL_LIBS@ @CRYPT_LIBS@ +else +WEBSOCKETSSSLSRCS = rfbssl_none.c rfbcrypto_included.c ../common/md5.c ../common/sha1.c +endif +endif + +WEBSOCKETSSRCS = websockets.c $(WEBSOCKETSSSLSRCS) +endif + +includedir=$(prefix)/include/rfb +#include_HEADERS=rfb.h rfbconfig.h rfbint.h rfbproto.h keysym.h rfbregion.h + +include_HEADERS=../rfb/rfb.h ../rfb/rfbconfig.h ../rfb/rfbint.h \ + ../rfb/rfbproto.h ../rfb/keysym.h ../rfb/rfbregion.h ../rfb/rfbclient.h + +noinst_HEADERS=../common/d3des.h ../rfb/default8x16.h zrleoutstream.h \ + zrlepalettehelper.h zrletypes.h private.h scale.h rfbssl.h rfbcrypto.h \ + ../common/minilzo.h ../common/lzoconf.h ../common/lzodefs.h ../common/md5.h ../common/sha1.h \ + $(TIGHTVNCFILETRANSFERHDRS) + +EXTRA_DIST=tableinit24.c tableinittctemplate.c tabletranstemplate.c \ + tableinitcmtemplate.c tabletrans24template.c \ + zrleencodetemplate.c + +if HAVE_LIBZ +ZLIBSRCS = zlib.c zrle.c zrleoutstream.c zrlepalettehelper.c ../common/zywrletemplate.c +if HAVE_LIBJPEG +TIGHTSRCS = tight.c ../common/turbojpeg.c +endif +endif + +LIB_SRCS = main.c rfbserver.c rfbregion.c auth.c sockets.c $(WEBSOCKETSSRCS) \ + stats.c corre.c hextile.c rre.c translate.c cutpaste.c \ + httpd.c cursor.c font.c \ + draw.c selbox.c ../common/d3des.c ../common/vncauth.c cargs.c ../common/minilzo.c ultra.c scale.c \ + $(ZLIBSRCS) $(TIGHTSRCS) $(TIGHTVNCFILETRANSFERSRCS) + +libvncserver_la_SOURCES=$(LIB_SRCS) +libvncserver_la_LIBADD=$(WEBSOCKETSSSLLIBS) + +lib_LTLIBRARIES=libvncserver.la + +if HAVE_RPM +$(PACKAGE)-$(VERSION).tar.gz: dist + +# Rule to build RPM distribution package +rpm: $(PACKAGE)-$(VERSION).tar.gz libvncserver.spec + cp $(PACKAGE)-$(VERSION).tar.gz @RPMSOURCEDIR@ + rpmbuild -ba libvncserver.spec +endif + + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/Makefile.in b/jni/vnc/LibVNCServer-0.9.9/libvncserver/Makefile.in new file mode 100644 index 0000000..8675a91 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/Makefile.in @@ -0,0 +1,803 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = libvncserver +DIST_COMMON = $(am__noinst_HEADERS_DIST) $(include_HEADERS) \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/rfbconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +am__DEPENDENCIES_1 = +libvncserver_la_DEPENDENCIES = $(am__DEPENDENCIES_1) +am__libvncserver_la_SOURCES_DIST = main.c rfbserver.c rfbregion.c \ + auth.c sockets.c websockets.c rfbssl_none.c \ + rfbcrypto_included.c ../common/md5.c ../common/sha1.c \ + rfbssl_openssl.c rfbcrypto_openssl.c rfbssl_gnutls.c \ + rfbcrypto_gnutls.c stats.c corre.c hextile.c rre.c translate.c \ + cutpaste.c httpd.c cursor.c font.c draw.c selbox.c \ + ../common/d3des.c ../common/vncauth.c cargs.c \ + ../common/minilzo.c ultra.c scale.c zlib.c zrle.c \ + zrleoutstream.c zrlepalettehelper.c ../common/zywrletemplate.c \ + tight.c ../common/turbojpeg.c \ + tightvnc-filetransfer/rfbtightserver.c \ + tightvnc-filetransfer/handlefiletransferrequest.c \ + tightvnc-filetransfer/filetransfermsg.c \ + tightvnc-filetransfer/filelistinfo.c +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_FALSE@@WITH_WEBSOCKETS_TRUE@am__objects_1 = rfbssl_none.lo \ +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_FALSE@@WITH_WEBSOCKETS_TRUE@ rfbcrypto_included.lo \ +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_FALSE@@WITH_WEBSOCKETS_TRUE@ md5.lo \ +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_FALSE@@WITH_WEBSOCKETS_TRUE@ sha1.lo +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_TRUE@@WITH_WEBSOCKETS_TRUE@am__objects_1 = rfbssl_openssl.lo \ +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_TRUE@@WITH_WEBSOCKETS_TRUE@ rfbcrypto_openssl.lo +@HAVE_GNUTLS_TRUE@@WITH_WEBSOCKETS_TRUE@am__objects_1 = \ +@HAVE_GNUTLS_TRUE@@WITH_WEBSOCKETS_TRUE@ rfbssl_gnutls.lo \ +@HAVE_GNUTLS_TRUE@@WITH_WEBSOCKETS_TRUE@ rfbcrypto_gnutls.lo +@WITH_WEBSOCKETS_TRUE@am__objects_2 = websockets.lo $(am__objects_1) +@HAVE_LIBZ_TRUE@am__objects_3 = zlib.lo zrle.lo zrleoutstream.lo \ +@HAVE_LIBZ_TRUE@ zrlepalettehelper.lo zywrletemplate.lo +@HAVE_LIBJPEG_TRUE@@HAVE_LIBZ_TRUE@am__objects_4 = tight.lo \ +@HAVE_LIBJPEG_TRUE@@HAVE_LIBZ_TRUE@ turbojpeg.lo +@WITH_TIGHTVNC_FILETRANSFER_TRUE@am__objects_5 = rfbtightserver.lo \ +@WITH_TIGHTVNC_FILETRANSFER_TRUE@ handlefiletransferrequest.lo \ +@WITH_TIGHTVNC_FILETRANSFER_TRUE@ filetransfermsg.lo \ +@WITH_TIGHTVNC_FILETRANSFER_TRUE@ filelistinfo.lo +am__objects_6 = main.lo rfbserver.lo rfbregion.lo auth.lo sockets.lo \ + $(am__objects_2) stats.lo corre.lo hextile.lo rre.lo \ + translate.lo cutpaste.lo httpd.lo cursor.lo font.lo draw.lo \ + selbox.lo d3des.lo vncauth.lo cargs.lo minilzo.lo ultra.lo \ + scale.lo $(am__objects_3) $(am__objects_4) $(am__objects_5) +am_libvncserver_la_OBJECTS = $(am__objects_6) +libvncserver_la_OBJECTS = $(am_libvncserver_la_OBJECTS) +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = $(libvncserver_la_SOURCES) +DIST_SOURCES = $(am__libvncserver_la_SOURCES_DIST) +am__noinst_HEADERS_DIST = ../common/d3des.h ../rfb/default8x16.h \ + zrleoutstream.h zrlepalettehelper.h zrletypes.h private.h \ + scale.h rfbssl.h rfbcrypto.h ../common/minilzo.h \ + ../common/lzoconf.h ../common/lzodefs.h ../common/md5.h \ + ../common/sha1.h tightvnc-filetransfer/filelistinfo.h \ + tightvnc-filetransfer/filetransfermsg.h \ + tightvnc-filetransfer/handlefiletransferrequest.h \ + tightvnc-filetransfer/rfbtightproto.h +HEADERS = $(include_HEADERS) $(noinst_HEADERS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AVAHI_CFLAGS = @AVAHI_CFLAGS@ +AVAHI_LIBS = @AVAHI_LIBS@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CRYPT_LIBS = @CRYPT_LIBS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LDFLAGS = @JPEG_LDFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +RPMSOURCEDIR = @RPMSOURCEDIR@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSL_LIBS = @SSL_LIBS@ +STRIP = @STRIP@ +SYSTEM_LIBVNCSERVER_CFLAGS = @SYSTEM_LIBVNCSERVER_CFLAGS@ +SYSTEM_LIBVNCSERVER_LIBS = @SYSTEM_LIBVNCSERVER_LIBS@ +VERSION = @VERSION@ +WSOCKLIB = @WSOCKLIB@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = $(prefix)/include/rfb +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_ffmpeg = @with_ffmpeg@ +INCLUDES = -I$(top_srcdir) -I$(top_srcdir)/common +@WITH_TIGHTVNC_FILETRANSFER_TRUE@TIGHTVNCFILETRANSFERHDRS = tightvnc-filetransfer/filelistinfo.h \ +@WITH_TIGHTVNC_FILETRANSFER_TRUE@ tightvnc-filetransfer/filetransfermsg.h \ +@WITH_TIGHTVNC_FILETRANSFER_TRUE@ tightvnc-filetransfer/handlefiletransferrequest.h \ +@WITH_TIGHTVNC_FILETRANSFER_TRUE@ tightvnc-filetransfer/rfbtightproto.h + +@WITH_TIGHTVNC_FILETRANSFER_TRUE@TIGHTVNCFILETRANSFERSRCS = tightvnc-filetransfer/rfbtightserver.c \ +@WITH_TIGHTVNC_FILETRANSFER_TRUE@ tightvnc-filetransfer/handlefiletransferrequest.c \ +@WITH_TIGHTVNC_FILETRANSFER_TRUE@ tightvnc-filetransfer/filetransfermsg.c \ +@WITH_TIGHTVNC_FILETRANSFER_TRUE@ tightvnc-filetransfer/filelistinfo.c + +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_FALSE@@WITH_WEBSOCKETS_TRUE@WEBSOCKETSSSLSRCS = rfbssl_none.c rfbcrypto_included.c ../common/md5.c ../common/sha1.c +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_TRUE@@WITH_WEBSOCKETS_TRUE@WEBSOCKETSSSLSRCS = rfbssl_openssl.c rfbcrypto_openssl.c +@HAVE_GNUTLS_TRUE@@WITH_WEBSOCKETS_TRUE@WEBSOCKETSSSLSRCS = rfbssl_gnutls.c rfbcrypto_gnutls.c +@HAVE_GNUTLS_FALSE@@HAVE_LIBSSL_TRUE@@WITH_WEBSOCKETS_TRUE@WEBSOCKETSSSLLIBS = @SSL_LIBS@ @CRYPT_LIBS@ +@HAVE_GNUTLS_TRUE@@WITH_WEBSOCKETS_TRUE@WEBSOCKETSSSLLIBS = @GNUTLS_LIBS@ +@WITH_WEBSOCKETS_TRUE@WEBSOCKETSSRCS = websockets.c $(WEBSOCKETSSSLSRCS) +#include_HEADERS=rfb.h rfbconfig.h rfbint.h rfbproto.h keysym.h rfbregion.h +include_HEADERS = ../rfb/rfb.h ../rfb/rfbconfig.h ../rfb/rfbint.h \ + ../rfb/rfbproto.h ../rfb/keysym.h ../rfb/rfbregion.h ../rfb/rfbclient.h + +noinst_HEADERS = ../common/d3des.h ../rfb/default8x16.h zrleoutstream.h \ + zrlepalettehelper.h zrletypes.h private.h scale.h rfbssl.h rfbcrypto.h \ + ../common/minilzo.h ../common/lzoconf.h ../common/lzodefs.h ../common/md5.h ../common/sha1.h \ + $(TIGHTVNCFILETRANSFERHDRS) + +EXTRA_DIST = tableinit24.c tableinittctemplate.c tabletranstemplate.c \ + tableinitcmtemplate.c tabletrans24template.c \ + zrleencodetemplate.c + +@HAVE_LIBZ_TRUE@ZLIBSRCS = zlib.c zrle.c zrleoutstream.c zrlepalettehelper.c ../common/zywrletemplate.c +@HAVE_LIBJPEG_TRUE@@HAVE_LIBZ_TRUE@TIGHTSRCS = tight.c ../common/turbojpeg.c +LIB_SRCS = main.c rfbserver.c rfbregion.c auth.c sockets.c $(WEBSOCKETSSRCS) \ + stats.c corre.c hextile.c rre.c translate.c cutpaste.c \ + httpd.c cursor.c font.c \ + draw.c selbox.c ../common/d3des.c ../common/vncauth.c cargs.c ../common/minilzo.c ultra.c scale.c \ + $(ZLIBSRCS) $(TIGHTSRCS) $(TIGHTVNCFILETRANSFERSRCS) + +libvncserver_la_SOURCES = $(LIB_SRCS) +libvncserver_la_LIBADD = $(WEBSOCKETSSSLLIBS) +lib_LTLIBRARIES = libvncserver.la +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu libvncserver/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu libvncserver/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done +libvncserver.la: $(libvncserver_la_OBJECTS) $(libvncserver_la_DEPENDENCIES) + $(AM_V_CCLD)$(LINK) -rpath $(libdir) $(libvncserver_la_OBJECTS) $(libvncserver_la_LIBADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/auth.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cargs.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/corre.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cursor.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cutpaste.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/d3des.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/draw.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filelistinfo.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filetransfermsg.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/font.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/handlefiletransferrequest.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hextile.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/httpd.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/md5.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minilzo.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfbcrypto_gnutls.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfbcrypto_included.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfbcrypto_openssl.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfbregion.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfbserver.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfbssl_gnutls.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfbssl_none.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfbssl_openssl.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfbtightserver.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rre.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scale.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/selbox.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha1.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sockets.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stats.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tight.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/translate.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/turbojpeg.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ultra.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vncauth.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/websockets.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zlib.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zrle.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zrleoutstream.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zrlepalettehelper.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zywrletemplate.Plo@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +md5.lo: ../common/md5.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT md5.lo -MD -MP -MF $(DEPDIR)/md5.Tpo -c -o md5.lo `test -f '../common/md5.c' || echo '$(srcdir)/'`../common/md5.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/md5.Tpo $(DEPDIR)/md5.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../common/md5.c' object='md5.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o md5.lo `test -f '../common/md5.c' || echo '$(srcdir)/'`../common/md5.c + +sha1.lo: ../common/sha1.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha1.lo -MD -MP -MF $(DEPDIR)/sha1.Tpo -c -o sha1.lo `test -f '../common/sha1.c' || echo '$(srcdir)/'`../common/sha1.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/sha1.Tpo $(DEPDIR)/sha1.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../common/sha1.c' object='sha1.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha1.lo `test -f '../common/sha1.c' || echo '$(srcdir)/'`../common/sha1.c + +d3des.lo: ../common/d3des.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT d3des.lo -MD -MP -MF $(DEPDIR)/d3des.Tpo -c -o d3des.lo `test -f '../common/d3des.c' || echo '$(srcdir)/'`../common/d3des.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/d3des.Tpo $(DEPDIR)/d3des.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../common/d3des.c' object='d3des.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o d3des.lo `test -f '../common/d3des.c' || echo '$(srcdir)/'`../common/d3des.c + +vncauth.lo: ../common/vncauth.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT vncauth.lo -MD -MP -MF $(DEPDIR)/vncauth.Tpo -c -o vncauth.lo `test -f '../common/vncauth.c' || echo '$(srcdir)/'`../common/vncauth.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/vncauth.Tpo $(DEPDIR)/vncauth.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../common/vncauth.c' object='vncauth.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o vncauth.lo `test -f '../common/vncauth.c' || echo '$(srcdir)/'`../common/vncauth.c + +minilzo.lo: ../common/minilzo.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT minilzo.lo -MD -MP -MF $(DEPDIR)/minilzo.Tpo -c -o minilzo.lo `test -f '../common/minilzo.c' || echo '$(srcdir)/'`../common/minilzo.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/minilzo.Tpo $(DEPDIR)/minilzo.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../common/minilzo.c' object='minilzo.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o minilzo.lo `test -f '../common/minilzo.c' || echo '$(srcdir)/'`../common/minilzo.c + +zywrletemplate.lo: ../common/zywrletemplate.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT zywrletemplate.lo -MD -MP -MF $(DEPDIR)/zywrletemplate.Tpo -c -o zywrletemplate.lo `test -f '../common/zywrletemplate.c' || echo '$(srcdir)/'`../common/zywrletemplate.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/zywrletemplate.Tpo $(DEPDIR)/zywrletemplate.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../common/zywrletemplate.c' object='zywrletemplate.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o zywrletemplate.lo `test -f '../common/zywrletemplate.c' || echo '$(srcdir)/'`../common/zywrletemplate.c + +turbojpeg.lo: ../common/turbojpeg.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT turbojpeg.lo -MD -MP -MF $(DEPDIR)/turbojpeg.Tpo -c -o turbojpeg.lo `test -f '../common/turbojpeg.c' || echo '$(srcdir)/'`../common/turbojpeg.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/turbojpeg.Tpo $(DEPDIR)/turbojpeg.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../common/turbojpeg.c' object='turbojpeg.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o turbojpeg.lo `test -f '../common/turbojpeg.c' || echo '$(srcdir)/'`../common/turbojpeg.c + +rfbtightserver.lo: tightvnc-filetransfer/rfbtightserver.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rfbtightserver.lo -MD -MP -MF $(DEPDIR)/rfbtightserver.Tpo -c -o rfbtightserver.lo `test -f 'tightvnc-filetransfer/rfbtightserver.c' || echo '$(srcdir)/'`tightvnc-filetransfer/rfbtightserver.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/rfbtightserver.Tpo $(DEPDIR)/rfbtightserver.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tightvnc-filetransfer/rfbtightserver.c' object='rfbtightserver.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rfbtightserver.lo `test -f 'tightvnc-filetransfer/rfbtightserver.c' || echo '$(srcdir)/'`tightvnc-filetransfer/rfbtightserver.c + +handlefiletransferrequest.lo: tightvnc-filetransfer/handlefiletransferrequest.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT handlefiletransferrequest.lo -MD -MP -MF $(DEPDIR)/handlefiletransferrequest.Tpo -c -o handlefiletransferrequest.lo `test -f 'tightvnc-filetransfer/handlefiletransferrequest.c' || echo '$(srcdir)/'`tightvnc-filetransfer/handlefiletransferrequest.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/handlefiletransferrequest.Tpo $(DEPDIR)/handlefiletransferrequest.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tightvnc-filetransfer/handlefiletransferrequest.c' object='handlefiletransferrequest.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o handlefiletransferrequest.lo `test -f 'tightvnc-filetransfer/handlefiletransferrequest.c' || echo '$(srcdir)/'`tightvnc-filetransfer/handlefiletransferrequest.c + +filetransfermsg.lo: tightvnc-filetransfer/filetransfermsg.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT filetransfermsg.lo -MD -MP -MF $(DEPDIR)/filetransfermsg.Tpo -c -o filetransfermsg.lo `test -f 'tightvnc-filetransfer/filetransfermsg.c' || echo '$(srcdir)/'`tightvnc-filetransfer/filetransfermsg.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/filetransfermsg.Tpo $(DEPDIR)/filetransfermsg.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tightvnc-filetransfer/filetransfermsg.c' object='filetransfermsg.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o filetransfermsg.lo `test -f 'tightvnc-filetransfer/filetransfermsg.c' || echo '$(srcdir)/'`tightvnc-filetransfer/filetransfermsg.c + +filelistinfo.lo: tightvnc-filetransfer/filelistinfo.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT filelistinfo.lo -MD -MP -MF $(DEPDIR)/filelistinfo.Tpo -c -o filelistinfo.lo `test -f 'tightvnc-filetransfer/filelistinfo.c' || echo '$(srcdir)/'`tightvnc-filetransfer/filelistinfo.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/filelistinfo.Tpo $(DEPDIR)/filelistinfo.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tightvnc-filetransfer/filelistinfo.c' object='filelistinfo.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o filelistinfo.lo `test -f 'tightvnc-filetransfer/filelistinfo.c' || echo '$(srcdir)/'`tightvnc-filetransfer/filelistinfo.c + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) + test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ + done + +uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(includedir)" && rm -f $$files + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(LTLIBRARIES) $(HEADERS) +installdirs: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-includeHEADERS + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libLTLIBRARIES clean-libtool ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-includeHEADERS install-info \ + install-info-am install-libLTLIBRARIES install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES + + +@HAVE_RPM_TRUE@$(PACKAGE)-$(VERSION).tar.gz: dist + +# Rule to build RPM distribution package +@HAVE_RPM_TRUE@rpm: $(PACKAGE)-$(VERSION).tar.gz libvncserver.spec +@HAVE_RPM_TRUE@ cp $(PACKAGE)-$(VERSION).tar.gz @RPMSOURCEDIR@ +@HAVE_RPM_TRUE@ rpmbuild -ba libvncserver.spec + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/auth.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/auth.c new file mode 100644 index 0000000..814a814 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/auth.c @@ -0,0 +1,405 @@ +/* + * auth.c - deal with authentication. + * + * This file implements the VNC authentication protocol when setting up an RFB + * connection. + */ + +/* + * Copyright (C) 2005 Rohit Kumar, Johannes E. Schindelin + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include + +/* RFB 3.8 clients are well informed */ +void rfbClientSendString(rfbClientPtr cl, const char *reason); + + +/* + * Handle security types + */ + +static rfbSecurityHandler* securityHandlers = NULL; + +/* + * This method registers a list of new security types. + * It avoids same security type getting registered multiple times. + * The order is not preserved if multiple security types are + * registered at one-go. + */ +void +rfbRegisterSecurityHandler(rfbSecurityHandler* handler) +{ + rfbSecurityHandler *head = securityHandlers, *next = NULL; + + if(handler == NULL) + return; + + next = handler->next; + + while(head != NULL) { + if(head == handler) { + rfbRegisterSecurityHandler(next); + return; + } + + head = head->next; + } + + handler->next = securityHandlers; + securityHandlers = handler; + + rfbRegisterSecurityHandler(next); +} + +/* + * This method unregisters a list of security types. + * These security types won't be available for any new + * client connection. + */ +void +rfbUnregisterSecurityHandler(rfbSecurityHandler* handler) +{ + rfbSecurityHandler *cur = NULL, *pre = NULL; + + if(handler == NULL) + return; + + if(securityHandlers == handler) { + securityHandlers = securityHandlers->next; + rfbUnregisterSecurityHandler(handler->next); + return; + } + + cur = pre = securityHandlers; + + while(cur) { + if(cur == handler) { + pre->next = cur->next; + break; + } + pre = cur; + cur = cur->next; + } + rfbUnregisterSecurityHandler(handler->next); +} + +/* + * Send the authentication challenge. + */ + +static void +rfbVncAuthSendChallenge(rfbClientPtr cl) +{ + + /* 4 byte header is alreay sent. Which is rfbSecTypeVncAuth + (same as rfbVncAuth). Just send the challenge. */ + rfbRandomBytes(cl->authChallenge); + if (rfbWriteExact(cl, (char *)cl->authChallenge, CHALLENGESIZE) < 0) { + rfbLogPerror("rfbAuthNewClient: write"); + rfbCloseClient(cl); + return; + } + + /* Dispatch client input to rfbVncAuthProcessResponse. */ + cl->state = RFB_AUTHENTICATION; +} + +/* + * Send the NO AUTHENTICATION. SCARR + */ + +/* + * The rfbVncAuthNone function is currently the only function that contains + * special logic for the built-in Mac OS X VNC client which is activated by + * a protocolMinorVersion == 889 coming from the Mac OS X VNC client. + * The rfbProcessClientInitMessage function does understand how to handle the + * RFB_INITIALISATION_SHARED state which was introduced to support the built-in + * Mac OS X VNC client, but rfbProcessClientInitMessage does not examine the + * protocolMinorVersion version field and so its support for the + * RFB_INITIALISATION_SHARED state is not restricted to just the OS X client. + */ + +static void +rfbVncAuthNone(rfbClientPtr cl) +{ + /* The built-in Mac OS X VNC client behaves in a non-conforming fashion + * when the server version is 3.7 or later AND the list of security types + * sent to the OS X client contains the 'None' authentication type AND + * the OS X client sends back the 'None' type as its choice. In this case, + * and this case ONLY, the built-in Mac OS X VNC client will NOT send the + * ClientInit message and instead will behave as though an implicit + * ClientInit message containing a shared-flag of true has been sent. + * The special state RFB_INITIALISATION_SHARED represents this case. + * The Mac OS X VNC client can be detected by checking protocolMinorVersion + * for a value of 889. No other VNC client is known to use this value + * for protocolMinorVersion. */ + uint32_t authResult; + + /* The built-in Mac OS X VNC client expects to NOT receive a SecurityResult + * message for authentication type 'None'. Since its protocolMinorVersion + * is greater than 7 (it is 889) this case must be tested for specially. */ + if (cl->protocolMajorVersion==3 && cl->protocolMinorVersion > 7 && cl->protocolMinorVersion != 889) { + rfbLog("rfbProcessClientSecurityType: returning securityResult for client rfb version >= 3.8\n"); + authResult = Swap32IfLE(rfbVncAuthOK); + if (rfbWriteExact(cl, (char *)&authResult, 4) < 0) { + rfbLogPerror("rfbAuthProcessClientMessage: write"); + rfbCloseClient(cl); + return; + } + } + cl->state = cl->protocolMinorVersion == 889 ? RFB_INITIALISATION_SHARED : RFB_INITIALISATION; + if (cl->state == RFB_INITIALISATION_SHARED) + /* In this case we must call rfbProcessClientMessage now because + * otherwise we would hang waiting for data to be received from the + * client (the ClientInit message which will never come). */ + rfbProcessClientMessage(cl); + return; +} + + +/* + * Advertise the supported security types (protocol 3.7). Here before sending + * the list of security types to the client one more security type is added + * to the list if primaryType is not set to rfbSecTypeInvalid. This security + * type is the standard vnc security type which does the vnc authentication + * or it will be security type for no authentication. + * Different security types will be added by applications using this library. + */ + +static rfbSecurityHandler VncSecurityHandlerVncAuth = { + rfbSecTypeVncAuth, + rfbVncAuthSendChallenge, + NULL +}; + +static rfbSecurityHandler VncSecurityHandlerNone = { + rfbSecTypeNone, + rfbVncAuthNone, + NULL +}; + + +static void +rfbSendSecurityTypeList(rfbClientPtr cl, int primaryType) +{ + /* The size of the message is the count of security types +1, + * since the first byte is the number of types. */ + int size = 1; + rfbSecurityHandler* handler; +#define MAX_SECURITY_TYPES 255 + uint8_t buffer[MAX_SECURITY_TYPES+1]; + + + /* Fill in the list of security types in the client structure. (NOTE: Not really in the client structure) */ + switch (primaryType) { + case rfbSecTypeNone: + rfbRegisterSecurityHandler(&VncSecurityHandlerNone); + break; + case rfbSecTypeVncAuth: + rfbRegisterSecurityHandler(&VncSecurityHandlerVncAuth); + break; + } + + for (handler = securityHandlers; + handler && sizenext) { + buffer[size] = handler->type; + size++; + } + buffer[0] = (unsigned char)size-1; + + /* Send the list. */ + if (rfbWriteExact(cl, (char *)buffer, size) < 0) { + rfbLogPerror("rfbSendSecurityTypeList: write"); + rfbCloseClient(cl); + return; + } + + /* + * if count is 0, we need to send the reason and close the connection. + */ + if(size <= 1) { + /* This means total count is Zero and so reason msg should be sent */ + /* The execution should never reach here */ + char* reason = "No authentication mode is registered!"; + + rfbClientSendString(cl, reason); + return; + } + + /* Dispatch client input to rfbProcessClientSecurityType. */ + cl->state = RFB_SECURITY_TYPE; +} + + + + +/* + * Tell the client what security type will be used (protocol 3.3). + */ +static void +rfbSendSecurityType(rfbClientPtr cl, int32_t securityType) +{ + uint32_t value32; + + /* Send the value. */ + value32 = Swap32IfLE(securityType); + if (rfbWriteExact(cl, (char *)&value32, 4) < 0) { + rfbLogPerror("rfbSendSecurityType: write"); + rfbCloseClient(cl); + return; + } + + /* Decide what to do next. */ + switch (securityType) { + case rfbSecTypeNone: + /* Dispatch client input to rfbProcessClientInitMessage. */ + cl->state = RFB_INITIALISATION; + break; + case rfbSecTypeVncAuth: + /* Begin the standard VNC authentication procedure. */ + rfbVncAuthSendChallenge(cl); + break; + default: + /* Impossible case (hopefully). */ + rfbLogPerror("rfbSendSecurityType: assertion failed"); + rfbCloseClient(cl); + } +} + + + +/* + * rfbAuthNewClient is called right after negotiating the protocol + * version. Depending on the protocol version, we send either a code + * for authentication scheme to be used (protocol 3.3), or a list of + * possible "security types" (protocol 3.7). + */ + +void +rfbAuthNewClient(rfbClientPtr cl) +{ + int32_t securityType = rfbSecTypeInvalid; + + if (!cl->screen->authPasswdData || cl->reverseConnection) { + /* chk if this condition is valid or not. */ + securityType = rfbSecTypeNone; + } else if (cl->screen->authPasswdData) { + securityType = rfbSecTypeVncAuth; + } + + if (cl->protocolMajorVersion==3 && cl->protocolMinorVersion < 7) + { + /* Make sure we use only RFB 3.3 compatible security types. */ + if (securityType == rfbSecTypeInvalid) { + rfbLog("VNC authentication disabled - RFB 3.3 client rejected\n"); + rfbClientConnFailed(cl, "Your viewer cannot handle required " + "authentication methods"); + return; + } + rfbSendSecurityType(cl, securityType); + } else { + /* Here it's ok when securityType is set to rfbSecTypeInvalid. */ + rfbSendSecurityTypeList(cl, securityType); + } +} + +/* + * Read the security type chosen by the client (protocol 3.7). + */ + +void +rfbProcessClientSecurityType(rfbClientPtr cl) +{ + int n; + uint8_t chosenType; + rfbSecurityHandler* handler; + + /* Read the security type. */ + n = rfbReadExact(cl, (char *)&chosenType, 1); + if (n <= 0) { + if (n == 0) + rfbLog("rfbProcessClientSecurityType: client gone\n"); + else + rfbLogPerror("rfbProcessClientSecurityType: read"); + rfbCloseClient(cl); + return; + } + + /* Make sure it was present in the list sent by the server. */ + for (handler = securityHandlers; handler; handler = handler->next) { + if (chosenType == handler->type) { + rfbLog("rfbProcessClientSecurityType: executing handler for type %d\n", chosenType); + handler->handler(cl); + return; + } + } + + rfbLog("rfbProcessClientSecurityType: wrong security type (%d) requested\n", chosenType); + rfbCloseClient(cl); +} + + + +/* + * rfbAuthProcessClientMessage is called when the client sends its + * authentication response. + */ + +void +rfbAuthProcessClientMessage(rfbClientPtr cl) +{ + int n; + uint8_t response[CHALLENGESIZE]; + uint32_t authResult; + + if ((n = rfbReadExact(cl, (char *)response, CHALLENGESIZE)) <= 0) { + if (n != 0) + rfbLogPerror("rfbAuthProcessClientMessage: read"); + rfbCloseClient(cl); + return; + } + + if(!cl->screen->passwordCheck(cl,(const char*)response,CHALLENGESIZE)) { + rfbErr("rfbAuthProcessClientMessage: password check failed\n"); + authResult = Swap32IfLE(rfbVncAuthFailed); + if (rfbWriteExact(cl, (char *)&authResult, 4) < 0) { + rfbLogPerror("rfbAuthProcessClientMessage: write"); + } + /* support RFB 3.8 clients, they expect a reason *why* it was disconnected */ + if (cl->protocolMinorVersion > 7) { + rfbClientSendString(cl, "password check failed!"); + } + else + rfbCloseClient(cl); + return; + } + + authResult = Swap32IfLE(rfbVncAuthOK); + + if (rfbWriteExact(cl, (char *)&authResult, 4) < 0) { + rfbLogPerror("rfbAuthProcessClientMessage: write"); + rfbCloseClient(cl); + return; + } + + cl->state = RFB_INITIALISATION; +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/cargs.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/cargs.c new file mode 100644 index 0000000..b9eb02b --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/cargs.c @@ -0,0 +1,261 @@ +/* + * This parses the command line arguments. It was seperated from main.c by + * Justin Dearing . + */ + +/* + * LibVNCServer (C) 2001 Johannes E. Schindelin + * Original OSXvnc (C) 2001 Dan McGuirk . + * Original Xvnc (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * see GPL (latest version) for full details + */ + +#include + +extern int rfbStringToAddr(char *str, in_addr_t *iface); + +void +rfbUsage(void) +{ + rfbProtocolExtension* extension; + + fprintf(stderr, "-rfbport port TCP port for RFB protocol\n"); +#ifdef LIBVNCSERVER_IPv6 + fprintf(stderr, "-rfbportv6 port TCP6 port for RFB protocol\n"); +#endif + fprintf(stderr, "-rfbwait time max time in ms to wait for RFB client\n"); + fprintf(stderr, "-rfbauth passwd-file use authentication on RFB protocol\n" + " (use 'storepasswd' to create a password file)\n"); + fprintf(stderr, "-rfbversion 3.x Set the version of the RFB we choose to advertise\n"); + fprintf(stderr, "-permitfiletransfer permit file transfer support\n"); + fprintf(stderr, "-passwd plain-password use authentication \n" + " (use plain-password as password, USE AT YOUR RISK)\n"); + fprintf(stderr, "-deferupdate time time in ms to defer updates " + "(default 40)\n"); + fprintf(stderr, "-deferptrupdate time time in ms to defer pointer updates" + " (default none)\n"); + fprintf(stderr, "-desktop name VNC desktop name (default \"LibVNCServer\")\n"); + fprintf(stderr, "-alwaysshared always treat new clients as shared\n"); + fprintf(stderr, "-nevershared never treat new clients as shared\n"); + fprintf(stderr, "-dontdisconnect don't disconnect existing clients when a " + "new non-shared\n" + " connection comes in (refuse new connection " + "instead)\n"); + fprintf(stderr, "-httpdir dir-path enable http server using dir-path home\n"); + fprintf(stderr, "-httpport portnum use portnum for http connection\n"); +#ifdef LIBVNCSERVER_IPv6 + fprintf(stderr, "-httpportv6 portnum use portnum for IPv6 http connection\n"); +#endif + fprintf(stderr, "-enablehttpproxy enable http proxy support\n"); + fprintf(stderr, "-progressive height enable progressive updating for slow links\n"); + fprintf(stderr, "-listen ipaddr listen for connections only on network interface with\n"); + fprintf(stderr, " addr ipaddr. '-listen localhost' and hostname work too.\n"); +#ifdef LIBVNCSERVER_IPv6 + fprintf(stderr, "-listenv6 ipv6addr listen for IPv6 connections only on network interface with\n"); + fprintf(stderr, " addr ipv6addr. '-listen localhost' and hostname work too.\n"); +#endif + + for(extension=rfbGetExtensionIterator();extension;extension=extension->next) + if(extension->usage) + extension->usage(); + rfbReleaseExtensionIterator(); +} + +/* purges COUNT arguments from ARGV at POSITION and decrements ARGC. + POSITION points to the first non purged argument afterwards. */ +void rfbPurgeArguments(int* argc,int* position,int count,char *argv[]) +{ + int amount=(*argc)-(*position)-count; + if(amount) + memmove(argv+(*position),argv+(*position)+count,sizeof(char*)*amount); + (*argc)-=count; +} + +rfbBool +rfbProcessArguments(rfbScreenInfoPtr rfbScreen,int* argc, char *argv[]) +{ + int i,i1; + + if(!argc) return TRUE; + + for (i = i1 = 1; i < *argc;) { + if (strcmp(argv[i], "-help") == 0) { + rfbUsage(); + return FALSE; + } else if (strcmp(argv[i], "-rfbport") == 0) { /* -rfbport port */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->port = atoi(argv[++i]); +#ifdef LIBVNCSERVER_IPv6 + } else if (strcmp(argv[i], "-rfbportv6") == 0) { /* -rfbportv6 port */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->ipv6port = atoi(argv[++i]); +#endif + } else if (strcmp(argv[i], "-rfbwait") == 0) { /* -rfbwait ms */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->maxClientWait = atoi(argv[++i]); + } else if (strcmp(argv[i], "-rfbauth") == 0) { /* -rfbauth passwd-file */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->authPasswdData = argv[++i]; + + } else if (strcmp(argv[i], "-permitfiletransfer") == 0) { /* -permitfiletransfer */ + rfbScreen->permitFileTransfer = TRUE; + } else if (strcmp(argv[i], "-rfbversion") == 0) { /* -rfbversion 3.6 */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + sscanf(argv[++i],"%d.%d", &rfbScreen->protocolMajorVersion, &rfbScreen->protocolMinorVersion); + } else if (strcmp(argv[i], "-passwd") == 0) { /* -passwd password */ + char **passwds = malloc(sizeof(char**)*2); + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + passwds[0] = argv[++i]; + passwds[1] = NULL; + rfbScreen->authPasswdData = (void*)passwds; + rfbScreen->passwordCheck = rfbCheckPasswordByList; + } else if (strcmp(argv[i], "-deferupdate") == 0) { /* -deferupdate milliseconds */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->deferUpdateTime = atoi(argv[++i]); + } else if (strcmp(argv[i], "-deferptrupdate") == 0) { /* -deferptrupdate milliseconds */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->deferPtrUpdateTime = atoi(argv[++i]); + } else if (strcmp(argv[i], "-desktop") == 0) { /* -desktop desktop-name */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->desktopName = argv[++i]; + } else if (strcmp(argv[i], "-alwaysshared") == 0) { + rfbScreen->alwaysShared = TRUE; + } else if (strcmp(argv[i], "-nevershared") == 0) { + rfbScreen->neverShared = TRUE; + } else if (strcmp(argv[i], "-dontdisconnect") == 0) { + rfbScreen->dontDisconnect = TRUE; + } else if (strcmp(argv[i], "-httpdir") == 0) { /* -httpdir directory-path */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->httpDir = argv[++i]; + } else if (strcmp(argv[i], "-httpport") == 0) { /* -httpport portnum */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->httpPort = atoi(argv[++i]); +#ifdef LIBVNCSERVER_IPv6 + } else if (strcmp(argv[i], "-httpportv6") == 0) { /* -httpportv6 portnum */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->http6Port = atoi(argv[++i]); +#endif + } else if (strcmp(argv[i], "-enablehttpproxy") == 0) { + rfbScreen->httpEnableProxyConnect = TRUE; + } else if (strcmp(argv[i], "-progressive") == 0) { /* -httpport portnum */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->progressiveSliceHeight = atoi(argv[++i]); + } else if (strcmp(argv[i], "-listen") == 0) { /* -listen ipaddr */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + if (! rfbStringToAddr(argv[++i], &(rfbScreen->listenInterface))) { + return FALSE; + } +#ifdef LIBVNCSERVER_IPv6 + } else if (strcmp(argv[i], "-listenv6") == 0) { /* -listenv6 ipv6addr */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->listen6Interface = argv[++i]; +#endif +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS + } else if (strcmp(argv[i], "-sslkeyfile") == 0) { /* -sslkeyfile sslkeyfile */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->sslkeyfile = argv[++i]; + } else if (strcmp(argv[i], "-sslcertfile") == 0) { /* -sslcertfile sslcertfile */ + if (i + 1 >= *argc) { + rfbUsage(); + return FALSE; + } + rfbScreen->sslcertfile = argv[++i]; +#endif + } else { + rfbProtocolExtension* extension; + int handled=0; + + for(extension=rfbGetExtensionIterator();handled==0 && extension; + extension=extension->next) + if(extension->processArgument) + handled = extension->processArgument(*argc - i, argv + i); + rfbReleaseExtensionIterator(); + + if(handled==0) { + i++; + i1=i; + continue; + } + i+=handled-1; + } + /* we just remove the processed arguments from the list */ + rfbPurgeArguments(argc,&i1,i-i1+1,argv); + i=i1; + } + return TRUE; +} + +rfbBool +rfbProcessSizeArguments(int* width,int* height,int* bpp,int* argc, char *argv[]) +{ + int i,i1; + + if(!argc) return TRUE; + for (i = i1 = 1; i < *argc-1;) { + if (strcmp(argv[i], "-bpp") == 0) { + *bpp = atoi(argv[++i]); + } else if (strcmp(argv[i], "-width") == 0) { + *width = atoi(argv[++i]); + } else if (strcmp(argv[i], "-height") == 0) { + *height = atoi(argv[++i]); + } else { + i++; + i1=i; + continue; + } + rfbPurgeArguments(argc,&i1,i-i1,argv); + i=i1; + } + return TRUE; +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/corre.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/corre.c new file mode 100644 index 0000000..8a845ea --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/corre.c @@ -0,0 +1,342 @@ +/* + * corre.c + * + * Routines to implement Compact Rise-and-Run-length Encoding (CoRRE). This + * code is based on krw's original javatel rfbserver. + */ + +/* + * Copyright (C) 2002 RealVNC Ltd. + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include + +/* + * cl->beforeEncBuf contains pixel data in the client's format. + * cl->afterEncBuf contains the RRE encoded version. If the RRE encoded version is + * larger than the raw data or if it exceeds cl->afterEncBufSize then + * raw encoding is used instead. + */ + +static int subrectEncode8(rfbClientPtr cl, uint8_t *data, int w, int h); +static int subrectEncode16(rfbClientPtr cl, uint16_t *data, int w, int h); +static int subrectEncode32(rfbClientPtr cl, uint32_t *data, int w, int h); +static uint32_t getBgColour(char *data, int size, int bpp); +static rfbBool rfbSendSmallRectEncodingCoRRE(rfbClientPtr cl, int x, int y, + int w, int h); + + +/* + * rfbSendRectEncodingCoRRE - send an arbitrary size rectangle using CoRRE + * encoding. + */ + +rfbBool +rfbSendRectEncodingCoRRE(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + if (h > cl->correMaxHeight) { + return (rfbSendRectEncodingCoRRE(cl, x, y, w, cl->correMaxHeight) && + rfbSendRectEncodingCoRRE(cl, x, y + cl->correMaxHeight, w, + h - cl->correMaxHeight)); + } + + if (w > cl->correMaxWidth) { + return (rfbSendRectEncodingCoRRE(cl, x, y, cl->correMaxWidth, h) && + rfbSendRectEncodingCoRRE(cl, x + cl->correMaxWidth, y, + w - cl->correMaxWidth, h)); + } + + rfbSendSmallRectEncodingCoRRE(cl, x, y, w, h); + return TRUE; +} + + + +/* + * rfbSendSmallRectEncodingCoRRE - send a small (guaranteed < 256x256) + * rectangle using CoRRE encoding. + */ + +static rfbBool +rfbSendSmallRectEncodingCoRRE(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + rfbFramebufferUpdateRectHeader rect; + rfbRREHeader hdr; + int nSubrects; + int i; + char *fbptr = (cl->scaledScreen->frameBuffer + (cl->scaledScreen->paddedWidthInBytes * y) + + (x * (cl->scaledScreen->bitsPerPixel / 8))); + + int maxRawSize = (cl->scaledScreen->width * cl->scaledScreen->height + * (cl->format.bitsPerPixel / 8)); + + if (cl->beforeEncBufSize < maxRawSize) { + cl->beforeEncBufSize = maxRawSize; + if (cl->beforeEncBuf == NULL) + cl->beforeEncBuf = (char *)malloc(cl->beforeEncBufSize); + else + cl->beforeEncBuf = (char *)realloc(cl->beforeEncBuf, cl->beforeEncBufSize); + } + + if (cl->afterEncBufSize < maxRawSize) { + cl->afterEncBufSize = maxRawSize; + if (cl->afterEncBuf == NULL) + cl->afterEncBuf = (char *)malloc(cl->afterEncBufSize); + else + cl->afterEncBuf = (char *)realloc(cl->afterEncBuf, cl->afterEncBufSize); + } + + (*cl->translateFn)(cl->translateLookupTable,&(cl->screen->serverFormat), + &cl->format, fbptr, cl->beforeEncBuf, + cl->scaledScreen->paddedWidthInBytes, w, h); + + switch (cl->format.bitsPerPixel) { + case 8: + nSubrects = subrectEncode8(cl, (uint8_t *)cl->beforeEncBuf, w, h); + break; + case 16: + nSubrects = subrectEncode16(cl, (uint16_t *)cl->beforeEncBuf, w, h); + break; + case 32: + nSubrects = subrectEncode32(cl, (uint32_t *)cl->beforeEncBuf, w, h); + break; + default: + rfbLog("getBgColour: bpp %d?\n",cl->format.bitsPerPixel); + return FALSE; + } + + if (nSubrects < 0) { + + /* RRE encoding was too large, use raw */ + + return rfbSendRectEncodingRaw(cl, x, y, w, h); + } + + rfbStatRecordEncodingSent(cl,rfbEncodingCoRRE, + sz_rfbFramebufferUpdateRectHeader + sz_rfbRREHeader + cl->afterEncBufLen, + sz_rfbFramebufferUpdateRectHeader + w * h * (cl->format.bitsPerPixel / 8)); + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader + sz_rfbRREHeader + > UPDATE_BUF_SIZE) + { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.r.x = Swap16IfLE(x); + rect.r.y = Swap16IfLE(y); + rect.r.w = Swap16IfLE(w); + rect.r.h = Swap16IfLE(h); + rect.encoding = Swap32IfLE(rfbEncodingCoRRE); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + hdr.nSubrects = Swap32IfLE(nSubrects); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&hdr, sz_rfbRREHeader); + cl->ublen += sz_rfbRREHeader; + + for (i = 0; i < cl->afterEncBufLen;) { + + int bytesToCopy = UPDATE_BUF_SIZE - cl->ublen; + + if (i + bytesToCopy > cl->afterEncBufLen) { + bytesToCopy = cl->afterEncBufLen - i; + } + + memcpy(&cl->updateBuf[cl->ublen], &cl->afterEncBuf[i], bytesToCopy); + + cl->ublen += bytesToCopy; + i += bytesToCopy; + + if (cl->ublen == UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + } + + return TRUE; +} + + + +/* + * subrectEncode() encodes the given multicoloured rectangle as a background + * colour overwritten by single-coloured rectangles. It returns the number + * of subrectangles in the encoded buffer, or -1 if subrect encoding won't + * fit in the buffer. It puts the encoded rectangles in cl->afterEncBuf. The + * single-colour rectangle partition is not optimal, but does find the biggest + * horizontal or vertical rectangle top-left anchored to each consecutive + * coordinate position. + * + * The coding scheme is simply [...] where each + * is []. + */ + +#define DEFINE_SUBRECT_ENCODE(bpp) \ +static int \ +subrectEncode##bpp(rfbClientPtr client, uint##bpp##_t *data, int w, int h) { \ + uint##bpp##_t cl; \ + rfbCoRRERectangle subrect; \ + int x,y; \ + int i,j; \ + int hx=0,hy,vx=0,vy; \ + int hyflag; \ + uint##bpp##_t *seg; \ + uint##bpp##_t *line; \ + int hw,hh,vw,vh; \ + int thex,they,thew,theh; \ + int numsubs = 0; \ + int newLen; \ + uint##bpp##_t bg = (uint##bpp##_t)getBgColour((char*)data,w*h,bpp); \ + \ + *((uint##bpp##_t*)client->afterEncBuf) = bg; \ + \ + client->afterEncBufLen = (bpp/8); \ + \ + for (y=0; y 0) && (i >= hx)) {hy += 1;} else {hyflag = 0;} \ + } \ + vy = j-1; \ + \ + /* We now have two possible subrects: (x,y,hx,hy) and (x,y,vx,vy) \ + * We'll choose the bigger of the two. \ + */ \ + hw = hx-x+1; \ + hh = hy-y+1; \ + vw = vx-x+1; \ + vh = vy-y+1; \ + \ + thex = x; \ + they = y; \ + \ + if ((hw*hh) > (vw*vh)) { \ + thew = hw; \ + theh = hh; \ + } else { \ + thew = vw; \ + theh = vh; \ + } \ + \ + subrect.x = thex; \ + subrect.y = they; \ + subrect.w = thew; \ + subrect.h = theh; \ + \ + newLen = client->afterEncBufLen + (bpp/8) + sz_rfbCoRRERectangle; \ + if ((newLen > (w * h * (bpp/8))) || (newLen > client->afterEncBufSize)) \ + return -1; \ + \ + numsubs += 1; \ + *((uint##bpp##_t*)(client->afterEncBuf + client->afterEncBufLen)) = cl; \ + client->afterEncBufLen += (bpp/8); \ + memcpy(&client->afterEncBuf[client->afterEncBufLen],&subrect,sz_rfbCoRRERectangle); \ + client->afterEncBufLen += sz_rfbCoRRERectangle; \ + \ + /* \ + * Now mark the subrect as done. \ + */ \ + for (j=they; j < (they+theh); j++) { \ + for (i=thex; i < (thex+thew); i++) { \ + data[j*w+i] = bg; \ + } \ + } \ + } \ + } \ + } \ + \ + return numsubs; \ +} + +DEFINE_SUBRECT_ENCODE(8) +DEFINE_SUBRECT_ENCODE(16) +DEFINE_SUBRECT_ENCODE(32) + + +/* + * getBgColour() gets the most prevalent colour in a byte array. + */ +static uint32_t +getBgColour(char *data, int size, int bpp) +{ + +#define NUMCLRS 256 + + static int counts[NUMCLRS]; + int i,j,k; + + int maxcount = 0; + uint8_t maxclr = 0; + + if (bpp != 8) { + if (bpp == 16) { + return ((uint16_t *)data)[0]; + } else if (bpp == 32) { + return ((uint32_t *)data)[0]; + } else { + rfbLog("getBgColour: bpp %d?\n",bpp); + return 0; + } + } + + for (i=0; i= NUMCLRS) { + rfbLog("getBgColour: unusual colour = %d\n", k); + return 0; + } + counts[k] += 1; + if (counts[k] > maxcount) { + maxcount = counts[k]; + maxclr = ((uint8_t *)data)[j]; + } + } + + return maxclr; +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/cursor.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/cursor.c new file mode 100644 index 0000000..c071dd9 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/cursor.c @@ -0,0 +1,756 @@ +/* + * cursor.c - support for cursor shape updates. + */ + +/* + * Copyright (C) 2000, 2001 Const Kaplinsky. All Rights Reserved. + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include +#include "private.h" + +void rfbScaledScreenUpdate(rfbScreenInfoPtr screen, int x1, int y1, int x2, int y2); + +/* + * Send cursor shape either in X-style format or in client pixel format. + */ + +rfbBool +rfbSendCursorShape(rfbClientPtr cl) +{ + rfbCursorPtr pCursor; + rfbFramebufferUpdateRectHeader rect; + rfbXCursorColors colors; + int saved_ublen; + int bitmapRowBytes, maskBytes, dataBytes; + int i, j; + uint8_t *bitmapData; + uint8_t bitmapByte; + + /* TODO: scale the cursor data to the correct size */ + + pCursor = cl->screen->getCursorPtr(cl); + /*if(!pCursor) return TRUE;*/ + + if (cl->useRichCursorEncoding) { + if(pCursor && !pCursor->richSource) + rfbMakeRichCursorFromXCursor(cl->screen,pCursor); + rect.encoding = Swap32IfLE(rfbEncodingRichCursor); + } else { + if(pCursor && !pCursor->source) + rfbMakeXCursorFromRichCursor(cl->screen,pCursor); + rect.encoding = Swap32IfLE(rfbEncodingXCursor); + } + + /* If there is no cursor, send update with empty cursor data. */ + + if ( pCursor && pCursor->width == 1 && + pCursor->height == 1 && + pCursor->mask[0] == 0 ) { + pCursor = NULL; + } + + if (pCursor == NULL) { + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader > UPDATE_BUF_SIZE ) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + rect.r.x = rect.r.y = 0; + rect.r.w = rect.r.h = 0; + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + if (!rfbSendUpdateBuf(cl)) + return FALSE; + + return TRUE; + } + + /* Calculate data sizes. */ + + bitmapRowBytes = (pCursor->width + 7) / 8; + maskBytes = bitmapRowBytes * pCursor->height; + dataBytes = (cl->useRichCursorEncoding) ? + (pCursor->width * pCursor->height * + (cl->format.bitsPerPixel / 8)) : maskBytes; + + /* Send buffer contents if needed. */ + + if ( cl->ublen + sz_rfbFramebufferUpdateRectHeader + + sz_rfbXCursorColors + maskBytes + dataBytes > UPDATE_BUF_SIZE ) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + if ( cl->ublen + sz_rfbFramebufferUpdateRectHeader + + sz_rfbXCursorColors + maskBytes + dataBytes > UPDATE_BUF_SIZE ) { + return FALSE; /* FIXME. */ + } + + saved_ublen = cl->ublen; + + /* Prepare rectangle header. */ + + rect.r.x = Swap16IfLE(pCursor->xhot); + rect.r.y = Swap16IfLE(pCursor->yhot); + rect.r.w = Swap16IfLE(pCursor->width); + rect.r.h = Swap16IfLE(pCursor->height); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect,sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + /* Prepare actual cursor data (depends on encoding used). */ + + if (!cl->useRichCursorEncoding) { + /* XCursor encoding. */ + colors.foreRed = (char)(pCursor->foreRed >> 8); + colors.foreGreen = (char)(pCursor->foreGreen >> 8); + colors.foreBlue = (char)(pCursor->foreBlue >> 8); + colors.backRed = (char)(pCursor->backRed >> 8); + colors.backGreen = (char)(pCursor->backGreen >> 8); + colors.backBlue = (char)(pCursor->backBlue >> 8); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&colors, sz_rfbXCursorColors); + cl->ublen += sz_rfbXCursorColors; + + bitmapData = (uint8_t *)pCursor->source; + + for (i = 0; i < pCursor->height; i++) { + for (j = 0; j < bitmapRowBytes; j++) { + bitmapByte = bitmapData[i * bitmapRowBytes + j]; + cl->updateBuf[cl->ublen++] = (char)bitmapByte; + } + } + } else { + /* RichCursor encoding. */ + int bpp1=cl->screen->serverFormat.bitsPerPixel/8, + bpp2=cl->format.bitsPerPixel/8; + (*cl->translateFn)(cl->translateLookupTable, + &(cl->screen->serverFormat), + &cl->format, (char*)pCursor->richSource, + &cl->updateBuf[cl->ublen], + pCursor->width*bpp1, pCursor->width, pCursor->height); + + cl->ublen += pCursor->width*bpp2*pCursor->height; + } + + /* Prepare transparency mask. */ + + bitmapData = (uint8_t *)pCursor->mask; + + for (i = 0; i < pCursor->height; i++) { + for (j = 0; j < bitmapRowBytes; j++) { + bitmapByte = bitmapData[i * bitmapRowBytes + j]; + cl->updateBuf[cl->ublen++] = (char)bitmapByte; + } + } + + /* Send everything we have prepared in the cl->updateBuf[]. */ + rfbStatRecordEncodingSent(cl, (cl->useRichCursorEncoding ? rfbEncodingRichCursor : rfbEncodingXCursor), + sz_rfbFramebufferUpdateRectHeader + (cl->ublen - saved_ublen), sz_rfbFramebufferUpdateRectHeader + (cl->ublen - saved_ublen)); + + if (!rfbSendUpdateBuf(cl)) + return FALSE; + + return TRUE; +} + +/* + * Send cursor position (PointerPos pseudo-encoding). + */ + +rfbBool +rfbSendCursorPos(rfbClientPtr cl) +{ + rfbFramebufferUpdateRectHeader rect; + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.encoding = Swap32IfLE(rfbEncodingPointerPos); + rect.r.x = Swap16IfLE(cl->screen->cursorX); + rect.r.y = Swap16IfLE(cl->screen->cursorY); + rect.r.w = 0; + rect.r.h = 0; + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + rfbStatRecordEncodingSent(cl, rfbEncodingPointerPos, sz_rfbFramebufferUpdateRectHeader, sz_rfbFramebufferUpdateRectHeader); + + if (!rfbSendUpdateBuf(cl)) + return FALSE; + + return TRUE; +} + +/* conversion routine for predefined cursors in LSB order */ +unsigned char rfbReverseByte[0x100] = { + /* copied from Xvnc/lib/font/util/utilbitmap.c */ + 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, + 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0, + 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8, + 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, + 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, + 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4, + 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec, + 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, + 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, + 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2, + 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea, + 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, + 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6, + 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6, + 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, + 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, + 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1, + 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1, + 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, + 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, + 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5, + 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5, + 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, + 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, + 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3, + 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, + 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, + 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb, + 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7, + 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, + 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, + 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff +}; + +void rfbConvertLSBCursorBitmapOrMask(int width,int height,unsigned char* bitmap) +{ + int i,t=(width+7)/8*height; + for(i=0;icleanup=TRUE; + cursor->width=width; + cursor->height=height; + /*cursor->backRed=cursor->backGreen=cursor->backBlue=0xffff;*/ + cursor->foreRed=cursor->foreGreen=cursor->foreBlue=0xffff; + + cursor->source = (unsigned char*)calloc(w,height); + cursor->cleanupSource = TRUE; + for(j=0,cp=cursorString;j>1,cp++) + if(*cp!=' ') cursor->source[j*w+i/8]|=bit; + + if(maskString) { + cursor->mask = (unsigned char*)calloc(w,height); + for(j=0,cp=maskString;j>1,cp++) + if(*cp!=' ') cursor->mask[j*w+i/8]|=bit; + } else + cursor->mask = (unsigned char*)rfbMakeMaskForXCursor(width,height,(char*)cursor->source); + cursor->cleanupMask = TRUE; + + return(cursor); +} + +char* rfbMakeMaskForXCursor(int width,int height,char* source) +{ + int i,j,w=(width+7)/8; + char* mask=(char*)calloc(w,height); + unsigned char c; + + for(j=0;j=0;i--) { + c=source[j*w+i]; + if(j>0) c|=source[(j-1)*w+i]; + if(j0 && (c&0x80)) + mask[j*w+i-1]|=0x01; + if(i>1); + } + + return(mask); +} + +/* this function dithers the alpha using Floyd-Steinberg */ + +char* rfbMakeMaskFromAlphaSource(int width,int height,unsigned char* alphaSource) +{ + int* error=(int*)calloc(sizeof(int),width); + int i,j,currentError=0,maskStride=(width+7)/8; + unsigned char* result=(unsigned char*)calloc(maskStride,height); + + for(j=0;j>(i&7)); + /* alpha was treated as 0xff */ + currentError-=0xff; + } + /* propagate to next row */ + right=currentError/16; + middle=currentError*5/16; + left=currentError*3/16; + currentError-=right+middle+left; + error[i]=right; + if(i>0) { + error[i-1]=middle; + if(i>1) + error[i-2]=left; + } + } + free(error); + return (char *) result; +} + +void rfbFreeCursor(rfbCursorPtr cursor) +{ + if(cursor) { + if(cursor->cleanupRichSource && cursor->richSource) + free(cursor->richSource); + if(cursor->cleanupRichSource && cursor->alphaSource) + free(cursor->alphaSource); + if(cursor->cleanupSource && cursor->source) + free(cursor->source); + if(cursor->cleanupMask && cursor->mask) + free(cursor->mask); + if(cursor->cleanup) + free(cursor); + else { + cursor->cleanup=cursor->cleanupSource=cursor->cleanupMask + =cursor->cleanupRichSource=FALSE; + cursor->source=cursor->mask=cursor->richSource=NULL; + cursor->alphaSource=NULL; + } + } + +} + +/* background and foregroud colour have to be set beforehand */ +void rfbMakeXCursorFromRichCursor(rfbScreenInfoPtr rfbScreen,rfbCursorPtr cursor) +{ + rfbPixelFormat* format=&rfbScreen->serverFormat; + int i,j,w=(cursor->width+7)/8,bpp=format->bitsPerPixel/8, + width=cursor->width*bpp; + uint32_t background; + char *back=(char*)&background; + unsigned char bit; + int interp = 0, db = 0; + + if(cursor->source && cursor->cleanupSource) + free(cursor->source); + cursor->source=(unsigned char*)calloc(w,cursor->height); + cursor->cleanupSource=TRUE; + + if(format->bigEndian) { + back+=4-bpp; + } + + /* all zeros means we should interpolate to black+white ourselves */ + if (!cursor->backRed && !cursor->backGreen && !cursor->backBlue && + !cursor->foreRed && !cursor->foreGreen && !cursor->foreBlue) { + if (format->trueColour && (bpp == 1 || bpp == 2 || bpp == 4)) { + interp = 1; + cursor->foreRed = cursor->foreGreen = cursor->foreBlue = 0xffff; + } + } + + background = ((format->redMax * cursor->backRed) / 0xffff) << format->redShift | + ((format->greenMax * cursor->backGreen) / 0xffff) << format->greenShift | + ((format->blueMax * cursor->backBlue) / 0xffff) << format->blueShift; + +#define SETRGB(u) \ + r = (255 * (((format->redMax << format->redShift) & (*u)) >> format->redShift)) / format->redMax; \ + g = (255 * (((format->greenMax << format->greenShift) & (*u)) >> format->greenShift)) / format->greenMax; \ + b = (255 * (((format->blueMax << format->blueShift) & (*u)) >> format->blueShift)) / format->blueMax; + + if (db) fprintf(stderr, "interp: %d\n", interp); + + for(j=0;jheight;j++) { + for(i=0,bit=0x80;iwidth;i++,bit=(bit&1)?0x80:bit>>1) { + if (interp) { + int r = 0, g = 0, b = 0, grey; + unsigned char *p = cursor->richSource+j*width+i*bpp; + if (bpp == 1) { + unsigned char* uc = (unsigned char*) p; + SETRGB(uc); + } else if (bpp == 2) { + unsigned short* us = (unsigned short*) p; + SETRGB(us); + } else if (bpp == 4) { + unsigned int* ui = (unsigned int*) p; + SETRGB(ui); + } + grey = (r + g + b) / 3; + if (grey >= 128) { + cursor->source[j*w+i/8]|=bit; + if (db) fprintf(stderr, "1"); + } else { + if (db) fprintf(stderr, "0"); + } + + } else if(memcmp(cursor->richSource+j*width+i*bpp, back, bpp)) { + cursor->source[j*w+i/8]|=bit; + } + } + if (db) fprintf(stderr, "\n"); + } +} + +void rfbMakeRichCursorFromXCursor(rfbScreenInfoPtr rfbScreen,rfbCursorPtr cursor) +{ + rfbPixelFormat* format=&rfbScreen->serverFormat; + int i,j,w=(cursor->width+7)/8,bpp=format->bitsPerPixel/8; + uint32_t background,foreground; + char *back=(char*)&background,*fore=(char*)&foreground; + unsigned char *cp; + unsigned char bit; + + if(cursor->richSource && cursor->cleanupRichSource) + free(cursor->richSource); + cp=cursor->richSource=(unsigned char*)calloc(cursor->width*bpp,cursor->height); + cursor->cleanupRichSource=TRUE; + + if(format->bigEndian) { + back+=4-bpp; + fore+=4-bpp; + } + + background=cursor->backRed<redShift| + cursor->backGreen<greenShift|cursor->backBlue<blueShift; + foreground=cursor->foreRed<redShift| + cursor->foreGreen<greenShift|cursor->foreBlue<blueShift; + + for(j=0;jheight;j++) + for(i=0,bit=0x80;iwidth;i++,bit=(bit&1)?0x80:bit>>1,cp+=bpp) + if(cursor->source[j*w+i/8]&bit) memcpy(cp,fore,bpp); + else memcpy(cp,back,bpp); +} + +/* functions to draw/hide cursor directly in the frame buffer */ + +void rfbHideCursor(rfbClientPtr cl) +{ + rfbScreenInfoPtr s=cl->screen; + rfbCursorPtr c=s->cursor; + int j,x1,x2,y1,y2,bpp=s->serverFormat.bitsPerPixel/8, + rowstride=s->paddedWidthInBytes; + LOCK(s->cursorMutex); + if(!c) { + UNLOCK(s->cursorMutex); + return; + } + + /* restore what is under the cursor */ + x1=cl->cursorX-c->xhot; + x2=x1+c->width; + if(x1<0) x1=0; + if(x2>=s->width) x2=s->width-1; + x2-=x1; if(x2<=0) { + UNLOCK(s->cursorMutex); + return; + } + y1=cl->cursorY-c->yhot; + y2=y1+c->height; + if(y1<0) y1=0; + if(y2>=s->height) y2=s->height-1; + y2-=y1; if(y2<=0) { + UNLOCK(s->cursorMutex); + return; + } + + /* get saved data */ + for(j=0;jframeBuffer+(y1+j)*rowstride+x1*bpp, + s->underCursorBuffer+j*x2*bpp, + x2*bpp); + + /* Copy to all scaled versions */ + rfbScaledScreenUpdate(s, x1, y1, x1+x2, y1+y2); + + UNLOCK(s->cursorMutex); +} + +void rfbShowCursor(rfbClientPtr cl) +{ + rfbScreenInfoPtr s=cl->screen; + rfbCursorPtr c=s->cursor; + int i,j,x1,x2,y1,y2,i1,j1,bpp=s->serverFormat.bitsPerPixel/8, + rowstride=s->paddedWidthInBytes, + bufSize,w; + rfbBool wasChanged=FALSE; + + if(!c) return; + LOCK(s->cursorMutex); + + bufSize=c->width*c->height*bpp; + w=(c->width+7)/8; + if(s->underCursorBufferLenunderCursorBuffer!=NULL) + free(s->underCursorBuffer); + s->underCursorBuffer=malloc(bufSize); + s->underCursorBufferLen=bufSize; + } + + /* save what is under the cursor */ + i1=j1=0; /* offset in cursor */ + x1=cl->cursorX-c->xhot; + x2=x1+c->width; + if(x1<0) { i1=-x1; x1=0; } + if(x2>=s->width) x2=s->width-1; + x2-=x1; if(x2<=0) { + UNLOCK(s->cursorMutex); + return; /* nothing to do */ + } + + y1=cl->cursorY-c->yhot; + y2=y1+c->height; + if(y1<0) { j1=-y1; y1=0; } + if(y2>=s->height) y2=s->height-1; + y2-=y1; if(y2<=0) { + UNLOCK(s->cursorMutex); + return; /* nothing to do */ + } + + /* save data */ + for(j=0;junderCursorBuffer+j*x2*bpp; + const char* src=s->frameBuffer+(y1+j)*rowstride+x1*bpp; + unsigned int count=x2*bpp; + if(wasChanged || memcmp(dest,src,count)) { + wasChanged=TRUE; + memcpy(dest,src,count); + } + } + + if(!c->richSource) + rfbMakeRichCursorFromXCursor(s,c); + + if (c->alphaSource) { + int rmax, rshift; + int gmax, gshift; + int bmax, bshift; + int amax = 255; /* alphaSource is always 8bits of info per pixel */ + unsigned int rmask, gmask, bmask; + + rmax = s->serverFormat.redMax; + gmax = s->serverFormat.greenMax; + bmax = s->serverFormat.blueMax; + rshift = s->serverFormat.redShift; + gshift = s->serverFormat.greenShift; + bshift = s->serverFormat.blueShift; + + rmask = (rmax << rshift); + gmask = (gmax << gshift); + bmask = (bmax << bshift); + + for(j=0;jmask[], + * using the extracted alpha value instead. + */ + char *dest; + unsigned char *src, *aptr; + unsigned int val, dval, sval; + int rdst, gdst, bdst; /* fb RGB */ + int asrc, rsrc, gsrc, bsrc; /* rich source ARGB */ + + dest = s->frameBuffer + (j+y1)*rowstride + (i+x1)*bpp; + src = c->richSource + (j+j1)*c->width*bpp + (i+i1)*bpp; + aptr = c->alphaSource + (j+j1)*c->width + (i+i1); + + asrc = *aptr; + if (!asrc) { + continue; + } + + if (bpp == 1) { + dval = *((unsigned char*) dest); + sval = *((unsigned char*) src); + } else if (bpp == 2) { + dval = *((unsigned short*) dest); + sval = *((unsigned short*) src); + } else if (bpp == 3) { + unsigned char *dst = (unsigned char *) dest; + dval = 0; + dval |= ((*(dst+0)) << 0); + dval |= ((*(dst+1)) << 8); + dval |= ((*(dst+2)) << 16); + sval = 0; + sval |= ((*(src+0)) << 0); + sval |= ((*(src+1)) << 8); + sval |= ((*(src+2)) << 16); + } else if (bpp == 4) { + dval = *((unsigned int*) dest); + sval = *((unsigned int*) src); + } else { + continue; + } + + /* extract dest and src RGB */ + rdst = (dval & rmask) >> rshift; /* fb */ + gdst = (dval & gmask) >> gshift; + bdst = (dval & bmask) >> bshift; + + rsrc = (sval & rmask) >> rshift; /* richcursor */ + gsrc = (sval & gmask) >> gshift; + bsrc = (sval & bmask) >> bshift; + + /* blend in fb data. */ + if (! c->alphaPreMultiplied) { + rsrc = (asrc * rsrc)/amax; + gsrc = (asrc * gsrc)/amax; + bsrc = (asrc * bsrc)/amax; + } + rdst = rsrc + ((amax - asrc) * rdst)/amax; + gdst = gsrc + ((amax - asrc) * gdst)/amax; + bdst = bsrc + ((amax - asrc) * bdst)/amax; + + val = 0; + val |= (rdst << rshift); + val |= (gdst << gshift); + val |= (bdst << bshift); + + /* insert the cooked pixel into the fb */ + memcpy(dest, &val, bpp); + } + } + } else { + /* now the cursor has to be drawn */ + for(j=0;jmask[(j+j1)*w+(i+i1)/8]<<((i+i1)&7))&0x80) + memcpy(s->frameBuffer+(j+y1)*rowstride+(i+x1)*bpp, + c->richSource+(j+j1)*c->width*bpp+(i+i1)*bpp,bpp); + } + + /* Copy to all scaled versions */ + rfbScaledScreenUpdate(s, x1, y1, x1+x2, y1+y2); + + UNLOCK(s->cursorMutex); +} + +/* + * If enableCursorShapeUpdates is FALSE, and the cursor is hidden, make sure + * that if the frameBuffer was transmitted with a cursor drawn, then that + * region gets redrawn. + */ + +void rfbRedrawAfterHideCursor(rfbClientPtr cl,sraRegionPtr updateRegion) +{ + rfbScreenInfoPtr s = cl->screen; + rfbCursorPtr c = s->cursor; + + if(c) { + int x,y,x2,y2; + + x = cl->cursorX-c->xhot; + y = cl->cursorY-c->yhot; + x2 = x+c->width; + y2 = y+c->height; + + if(sraClipRect2(&x,&y,&x2,&y2,0,0,s->width,s->height)) { + sraRegionPtr rect; + rect = sraRgnCreateRect(x,y,x2,y2); + if(updateRegion) { + sraRgnOr(updateRegion,rect); + } else { + LOCK(cl->updateMutex); + sraRgnOr(cl->modifiedRegion,rect); + UNLOCK(cl->updateMutex); + } + sraRgnDestroy(rect); + } + } +} + +#ifdef DEBUG + +static void rfbPrintXCursor(rfbCursorPtr cursor) +{ + int i,i1,j,w=(cursor->width+7)/8; + unsigned char bit; + for(j=0;jheight;j++) { + for(i=0,i1=0,bit=0x80;i1width;i1++,i+=(bit&1)?1:0,bit=(bit&1)?0x80:bit>>1) + if(cursor->source[j*w+i]&bit) putchar('#'); else putchar(' '); + putchar(':'); + for(i=0,i1=0,bit=0x80;i1width;i1++,i+=(bit&1)?1:0,bit=(bit&1)?0x80:bit>>1) + if(cursor->mask[j*w+i]&bit) putchar('#'); else putchar(' '); + putchar('\n'); + } +} + +#endif + +void rfbSetCursor(rfbScreenInfoPtr rfbScreen,rfbCursorPtr c) +{ + rfbClientIteratorPtr iterator; + rfbClientPtr cl; + + LOCK(rfbScreen->cursorMutex); + + if(rfbScreen->cursor) { + iterator=rfbGetClientIterator(rfbScreen); + while((cl=rfbClientIteratorNext(iterator))) + if(!cl->enableCursorShapeUpdates) + rfbRedrawAfterHideCursor(cl,NULL); + rfbReleaseClientIterator(iterator); + + if(rfbScreen->cursor->cleanup) + rfbFreeCursor(rfbScreen->cursor); + } + + rfbScreen->cursor = c; + + iterator=rfbGetClientIterator(rfbScreen); + while((cl=rfbClientIteratorNext(iterator))) { + cl->cursorWasChanged = TRUE; + if(!cl->enableCursorShapeUpdates) + rfbRedrawAfterHideCursor(cl,NULL); + } + rfbReleaseClientIterator(iterator); + + UNLOCK(rfbScreen->cursorMutex); +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/cutpaste.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/cutpaste.c new file mode 100644 index 0000000..6a9dcb9 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/cutpaste.c @@ -0,0 +1,38 @@ +/* + * cutpaste.c - routines to deal with cut & paste buffers / selection. + */ + +/* + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include + + +/* + * rfbSetXCutText sets the cut buffer to be the given string. We also clear + * the primary selection. Ideally we'd like to set it to the same thing, but I + * can't work out how to do that without some kind of helper X client. + */ + +void rfbGotXCutText(rfbScreenInfoPtr rfbScreen, char *str, int len) +{ + rfbSendServerCutText(rfbScreen, str, len); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/draw.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/draw.c new file mode 100644 index 0000000..7e1ed49 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/draw.c @@ -0,0 +1,61 @@ +#include + +void rfbFillRect(rfbScreenInfoPtr s,int x1,int y1,int x2,int y2,rfbPixel col) +{ + int rowstride = s->paddedWidthInBytes, bpp = s->bitsPerPixel>>3; + int i,j; + char* colour=(char*)&col; + + if(!rfbEndianTest) + colour += 4-bpp; + for(j=y1;jframeBuffer+j*rowstride+i*bpp,colour,bpp); + rfbMarkRectAsModified(s,x1,y1,x2,y2); +} + +#define SETPIXEL(x,y) \ + memcpy(s->frameBuffer+(y)*rowstride+(x)*bpp,colour,bpp) + +void rfbDrawPixel(rfbScreenInfoPtr s,int x,int y,rfbPixel col) +{ + int rowstride = s->paddedWidthInBytes, bpp = s->bitsPerPixel>>3; + char* colour=(char*)&col; + + if(!rfbEndianTest) + colour += 4-bpp; + SETPIXEL(x,y); + rfbMarkRectAsModified(s,x,y,x+1,y+1); +} + +void rfbDrawLine(rfbScreenInfoPtr s,int x1,int y1,int x2,int y2,rfbPixel col) +{ + int rowstride = s->paddedWidthInBytes, bpp = s->bitsPerPixel>>3; + int i; + char* colour=(char*)&col; + + if(!rfbEndianTest) + colour += 4-bpp; + +#define SWAPPOINTS { i=x1; x1=x2; x2=i; i=y1; y1=y2; y2=i; } + if(abs(x1-x2)y2) + SWAPPOINTS + for(i=y1;i<=y2;i++) + SETPIXEL(x1+(i-y1)*(x2-x1)/(y2-y1),i); + /* TODO: Maybe make this more intelligently? */ + if(x2x2) + SWAPPOINTS + else if(x1==x2) { + rfbDrawPixel(s,x1,y1,col); + return; + } + for(i=x1;i<=x2;i++) + SETPIXEL(i,y1+(i-x1)*(y2-y1)/(x2-x1)); + if(y2 + +int rfbDrawChar(rfbScreenInfoPtr rfbScreen,rfbFontDataPtr font, + int x,int y,unsigned char c,rfbPixel col) +{ + int i,j,width,height; + unsigned char* data=font->data+font->metaData[c*5]; + unsigned char d=*data; + int rowstride=rfbScreen->paddedWidthInBytes; + int bpp=rfbScreen->serverFormat.bitsPerPixel/8; + char *colour=(char*)&col; + + if(!rfbEndianTest) + colour += 4-bpp; + + width=font->metaData[c*5+1]; + height=font->metaData[c*5+2]; + x+=font->metaData[c*5+3]; + y+=-font->metaData[c*5+4]-height+1; + + for(j=0;j= 0 && y+j < rfbScreen->height && + x+i >= 0 && x+i < rfbScreen->width) + memcpy(rfbScreen->frameBuffer+(y+j)*rowstride+(x+i)*bpp,colour,bpp); + d<<=1; + } + /* if((i&7)!=0) data++; */ + } + return(width); +} + +void rfbDrawString(rfbScreenInfoPtr rfbScreen,rfbFontDataPtr font, + int x,int y,const char* string,rfbPixel colour) +{ + while(*string) { + x+=rfbDrawChar(rfbScreen,font,x,y,*string,colour); + string++; + } +} + +/* TODO: these two functions need to be more efficient */ +/* if col==bcol, assume transparent background */ +int rfbDrawCharWithClip(rfbScreenInfoPtr rfbScreen,rfbFontDataPtr font, + int x,int y,unsigned char c, + int x1,int y1,int x2,int y2, + rfbPixel col,rfbPixel bcol) +{ + int i,j,width,height; + unsigned char* data=font->data+font->metaData[c*5]; + unsigned char d; + int rowstride=rfbScreen->paddedWidthInBytes; + int bpp=rfbScreen->serverFormat.bitsPerPixel/8,extra_bytes=0; + char* colour=(char*)&col; + char* bcolour=(char*)&bcol; + + if(!rfbEndianTest) { + colour+=4-bpp; + bcolour+=4-bpp; + } + + width=font->metaData[c*5+1]; + height=font->metaData[c*5+2]; + x+=font->metaData[c*5+3]; + y+=-font->metaData[c*5+4]-height+1; + + /* after clipping, x2 will be count of bytes between rows, + * x1 start of i, y1 start of j, width and height will be adjusted. */ + if(y1>y) { y1-=y; data+=(width+7)/8; height-=y1; y+=y1; } else y1=0; + if(x1>x) { x1-=x; data+=x1; width-=x1; x+=x1; extra_bytes+=x1/8; } else x1=0; + if(y2=x1 && x+i=y1 && y+jframeBuffer+(y+j)*rowstride+(x+i)*bpp, + colour,bpp); + } else if(bcol!=col) { + memcpy(rfbScreen->frameBuffer+(y+j)*rowstride+(x+i)*bpp, + bcolour,bpp); + } + } + d<<=1; + } + /* if((i&7)==0) data++; */ + data += extra_bytes; + } + return(width); +} + +void rfbDrawStringWithClip(rfbScreenInfoPtr rfbScreen,rfbFontDataPtr font, + int x,int y,const char* string, + int x1,int y1,int x2,int y2, + rfbPixel colour,rfbPixel backColour) +{ + while(*string) { + x+=rfbDrawCharWithClip(rfbScreen,font,x,y,*string,x1,y1,x2,y2, + colour,backColour); + string++; + } +} + +int rfbWidthOfString(rfbFontDataPtr font,const char* string) +{ + int i=0; + while(*string) { + i+=font->metaData[*string*5+1]; + string++; + } + return(i); +} + +int rfbWidthOfChar(rfbFontDataPtr font,unsigned char c) +{ + return(font->metaData[c*5+1]+font->metaData[c*5+3]); +} + +void rfbFontBBox(rfbFontDataPtr font,unsigned char c,int* x1,int* y1,int* x2,int* y2) +{ + *x1+=font->metaData[c*5+3]; + *y1+=-font->metaData[c*5+4]-font->metaData[c*5+2]+1; + *x2=*x1+font->metaData[c*5+1]+1; + *y2=*y1+font->metaData[c*5+2]+1; +} + +#ifndef INT_MAX +#define INT_MAX 0x7fffffff +#endif + +void rfbWholeFontBBox(rfbFontDataPtr font, + int *x1, int *y1, int *x2, int *y2) +{ + int i; + int* m=font->metaData; + + (*x1)=(*y1)=INT_MAX; (*x2)=(*y2)=1-(INT_MAX); + for(i=0;i<256;i++) { + if(m[i*5+1]-m[i*5+3]>(*x2)) + (*x2)=m[i*5+1]-m[i*5+3]; + if(-m[i*5+2]+m[i*5+4]<(*y1)) + (*y1)=-m[i*5+2]+m[i*5+4]; + if(m[i*5+3]<(*x1)) + (*x1)=m[i*5+3]; + if(-m[i*5+4]>(*y2)) + (*y2)=-m[i*5+4]; + } + (*x2)++; + (*y2)++; +} + +rfbFontDataPtr rfbLoadConsoleFont(char *filename) +{ + FILE *f=fopen(filename,"rb"); + rfbFontDataPtr p; + int i; + + if(!f) return NULL; + + p=(rfbFontDataPtr)malloc(sizeof(rfbFontData)); + p->data=(unsigned char*)malloc(4096); + if(1!=fread(p->data,4096,1,f)) { + free(p->data); + free(p); + return NULL; + } + fclose(f); + p->metaData=(int*)malloc(256*5*sizeof(int)); + for(i=0;i<256;i++) { + p->metaData[i*5+0]=i*16; /* offset */ + p->metaData[i*5+1]=8; /* width */ + p->metaData[i*5+2]=16; /* height */ + p->metaData[i*5+3]=0; /* xhot */ + p->metaData[i*5+4]=0; /* yhot */ + } + return(p); +} + +void rfbFreeFont(rfbFontDataPtr f) +{ + free(f->data); + free(f->metaData); + free(f); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/hextile.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/hextile.c new file mode 100644 index 0000000..52920d8 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/hextile.c @@ -0,0 +1,342 @@ +/* + * hextile.c + * + * Routines to implement Hextile Encoding + */ + +/* + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include + +static rfbBool sendHextiles8(rfbClientPtr cl, int x, int y, int w, int h); +static rfbBool sendHextiles16(rfbClientPtr cl, int x, int y, int w, int h); +static rfbBool sendHextiles32(rfbClientPtr cl, int x, int y, int w, int h); + + +/* + * rfbSendRectEncodingHextile - send a rectangle using hextile encoding. + */ + +rfbBool +rfbSendRectEncodingHextile(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + rfbFramebufferUpdateRectHeader rect; + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.r.x = Swap16IfLE(x); + rect.r.y = Swap16IfLE(y); + rect.r.w = Swap16IfLE(w); + rect.r.h = Swap16IfLE(h); + rect.encoding = Swap32IfLE(rfbEncodingHextile); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + rfbStatRecordEncodingSent(cl, rfbEncodingHextile, + sz_rfbFramebufferUpdateRectHeader, + sz_rfbFramebufferUpdateRectHeader + w * (cl->format.bitsPerPixel / 8) * h); + + switch (cl->format.bitsPerPixel) { + case 8: + return sendHextiles8(cl, x, y, w, h); + case 16: + return sendHextiles16(cl, x, y, w, h); + case 32: + return sendHextiles32(cl, x, y, w, h); + } + + rfbLog("rfbSendRectEncodingHextile: bpp %d?\n", cl->format.bitsPerPixel); + return FALSE; +} + + +#define PUT_PIXEL8(pix) (cl->updateBuf[cl->ublen++] = (pix)) + +#define PUT_PIXEL16(pix) (cl->updateBuf[cl->ublen++] = ((char*)&(pix))[0], \ + cl->updateBuf[cl->ublen++] = ((char*)&(pix))[1]) + +#define PUT_PIXEL32(pix) (cl->updateBuf[cl->ublen++] = ((char*)&(pix))[0], \ + cl->updateBuf[cl->ublen++] = ((char*)&(pix))[1], \ + cl->updateBuf[cl->ublen++] = ((char*)&(pix))[2], \ + cl->updateBuf[cl->ublen++] = ((char*)&(pix))[3]) + + +#define DEFINE_SEND_HEXTILES(bpp) \ + \ + \ +static rfbBool subrectEncode##bpp(rfbClientPtr cli, uint##bpp##_t *data, \ + int w, int h, uint##bpp##_t bg, uint##bpp##_t fg, rfbBool mono);\ +static void testColours##bpp(uint##bpp##_t *data, int size, rfbBool *mono, \ + rfbBool *solid, uint##bpp##_t *bg, uint##bpp##_t *fg); \ + \ + \ +/* \ + * rfbSendHextiles \ + */ \ + \ +static rfbBool \ +sendHextiles##bpp(rfbClientPtr cl, int rx, int ry, int rw, int rh) { \ + int x, y, w, h; \ + int startUblen; \ + char *fbptr; \ + uint##bpp##_t bg = 0, fg = 0, newBg, newFg; \ + rfbBool mono, solid; \ + rfbBool validBg = FALSE; \ + rfbBool validFg = FALSE; \ + uint##bpp##_t clientPixelData[16*16*(bpp/8)]; \ + \ + for (y = ry; y < ry+rh; y += 16) { \ + for (x = rx; x < rx+rw; x += 16) { \ + w = h = 16; \ + if (rx+rw - x < 16) \ + w = rx+rw - x; \ + if (ry+rh - y < 16) \ + h = ry+rh - y; \ + \ + if ((cl->ublen + 1 + (2 + 16 * 16) * (bpp/8)) > \ + UPDATE_BUF_SIZE) { \ + if (!rfbSendUpdateBuf(cl)) \ + return FALSE; \ + } \ + \ + fbptr = (cl->scaledScreen->frameBuffer + (cl->scaledScreen->paddedWidthInBytes * y) \ + + (x * (cl->scaledScreen->bitsPerPixel / 8))); \ + \ + (*cl->translateFn)(cl->translateLookupTable, &(cl->screen->serverFormat), \ + &cl->format, fbptr, (char *)clientPixelData, \ + cl->scaledScreen->paddedWidthInBytes, w, h); \ + \ + startUblen = cl->ublen; \ + cl->updateBuf[startUblen] = 0; \ + cl->ublen++; \ + rfbStatRecordEncodingSentAdd(cl, rfbEncodingHextile, 1); \ + \ + testColours##bpp(clientPixelData, w * h, \ + &mono, &solid, &newBg, &newFg); \ + \ + if (!validBg || (newBg != bg)) { \ + validBg = TRUE; \ + bg = newBg; \ + cl->updateBuf[startUblen] |= rfbHextileBackgroundSpecified; \ + PUT_PIXEL##bpp(bg); \ + } \ + \ + if (solid) { \ + continue; \ + } \ + \ + cl->updateBuf[startUblen] |= rfbHextileAnySubrects; \ + \ + if (mono) { \ + if (!validFg || (newFg != fg)) { \ + validFg = TRUE; \ + fg = newFg; \ + cl->updateBuf[startUblen] |= rfbHextileForegroundSpecified; \ + PUT_PIXEL##bpp(fg); \ + } \ + } else { \ + validFg = FALSE; \ + cl->updateBuf[startUblen] |= rfbHextileSubrectsColoured; \ + } \ + \ + if (!subrectEncode##bpp(cl, clientPixelData, w, h, bg, fg, mono)) { \ + /* encoding was too large, use raw */ \ + validBg = FALSE; \ + validFg = FALSE; \ + cl->ublen = startUblen; \ + cl->updateBuf[cl->ublen++] = rfbHextileRaw; \ + (*cl->translateFn)(cl->translateLookupTable, \ + &(cl->screen->serverFormat), &cl->format, fbptr, \ + (char *)clientPixelData, \ + cl->scaledScreen->paddedWidthInBytes, w, h); \ + \ + memcpy(&cl->updateBuf[cl->ublen], (char *)clientPixelData, \ + w * h * (bpp/8)); \ + \ + cl->ublen += w * h * (bpp/8); \ + rfbStatRecordEncodingSentAdd(cl, rfbEncodingHextile, \ + w * h * (bpp/8)); \ + } \ + } \ + } \ + \ + return TRUE; \ +} \ + \ + \ +static rfbBool \ +subrectEncode##bpp(rfbClientPtr cl, uint##bpp##_t *data, int w, int h, \ + uint##bpp##_t bg, uint##bpp##_t fg, rfbBool mono) \ +{ \ + uint##bpp##_t cl2; \ + int x,y; \ + int i,j; \ + int hx=0,hy,vx=0,vy; \ + int hyflag; \ + uint##bpp##_t *seg; \ + uint##bpp##_t *line; \ + int hw,hh,vw,vh; \ + int thex,they,thew,theh; \ + int numsubs = 0; \ + int newLen; \ + int nSubrectsUblen; \ + \ + nSubrectsUblen = cl->ublen; \ + cl->ublen++; \ + rfbStatRecordEncodingSentAdd(cl, rfbEncodingHextile, 1); \ + \ + for (y=0; y 0) && (i >= hx)) { \ + hy += 1; \ + } else { \ + hyflag = 0; \ + } \ + } \ + vy = j-1; \ + \ + /* We now have two possible subrects: (x,y,hx,hy) and \ + * (x,y,vx,vy). We'll choose the bigger of the two. \ + */ \ + hw = hx-x+1; \ + hh = hy-y+1; \ + vw = vx-x+1; \ + vh = vy-y+1; \ + \ + thex = x; \ + they = y; \ + \ + if ((hw*hh) > (vw*vh)) { \ + thew = hw; \ + theh = hh; \ + } else { \ + thew = vw; \ + theh = vh; \ + } \ + \ + if (mono) { \ + newLen = cl->ublen - nSubrectsUblen + 2; \ + } else { \ + newLen = cl->ublen - nSubrectsUblen + bpp/8 + 2; \ + } \ + \ + if (newLen > (w * h * (bpp/8))) \ + return FALSE; \ + \ + numsubs += 1; \ + \ + if (!mono) PUT_PIXEL##bpp(cl2); \ + \ + cl->updateBuf[cl->ublen++] = rfbHextilePackXY(thex,they); \ + cl->updateBuf[cl->ublen++] = rfbHextilePackWH(thew,theh); \ + rfbStatRecordEncodingSentAdd(cl, rfbEncodingHextile, 1); \ + \ + /* \ + * Now mark the subrect as done. \ + */ \ + for (j=they; j < (they+theh); j++) { \ + for (i=thex; i < (thex+thew); i++) { \ + data[j*w+i] = bg; \ + } \ + } \ + } \ + } \ + } \ + \ + cl->updateBuf[nSubrectsUblen] = numsubs; \ + \ + return TRUE; \ +} \ + \ + \ +/* \ + * testColours() tests if there are one (solid), two (mono) or more \ + * colours in a tile and gets a reasonable guess at the best background \ + * pixel, and the foreground pixel for mono. \ + */ \ + \ +static void \ +testColours##bpp(uint##bpp##_t *data, int size, rfbBool *mono, rfbBool *solid, \ + uint##bpp##_t *bg, uint##bpp##_t *fg) { \ + uint##bpp##_t colour1 = 0, colour2 = 0; \ + int n1 = 0, n2 = 0; \ + *mono = TRUE; \ + *solid = TRUE; \ + \ + for (; size > 0; size--, data++) { \ + \ + if (n1 == 0) \ + colour1 = *data; \ + \ + if (*data == colour1) { \ + n1++; \ + continue; \ + } \ + \ + if (n2 == 0) { \ + *solid = FALSE; \ + colour2 = *data; \ + } \ + \ + if (*data == colour2) { \ + n2++; \ + continue; \ + } \ + \ + *mono = FALSE; \ + break; \ + } \ + \ + if (n1 > n2) { \ + *bg = colour1; \ + *fg = colour2; \ + } else { \ + *bg = colour2; \ + *fg = colour1; \ + } \ +} + +DEFINE_SEND_HEXTILES(8) +DEFINE_SEND_HEXTILES(16) +DEFINE_SEND_HEXTILES(32) diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/httpd.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/httpd.c new file mode 100644 index 0000000..ed91e46 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/httpd.c @@ -0,0 +1,645 @@ +/* + * httpd.c - a simple HTTP server + */ + +/* + * Copyright (C) 2011-2012 Christian Beier + * Copyright (C) 2002 RealVNC Ltd. + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include + +#include +#ifdef LIBVNCSERVER_HAVE_UNISTD_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_SYS_TYPES_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_FCNTL_H +#include +#endif +#include + +#ifdef WIN32 +#include +#define close closesocket +#else +#ifdef LIBVNCSERVER_HAVE_SYS_TIME_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_SYS_SOCKET_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_NETINET_IN_H +#include +#include +#include +#include +#endif +#include +#endif + +#ifdef USE_LIBWRAP +#include +#endif + + +#define NOT_FOUND_STR "HTTP/1.0 404 Not found\r\nConnection: close\r\n\r\n" \ + "File Not Found\n" \ + "

File Not Found

\n" + +#define INVALID_REQUEST_STR "HTTP/1.0 400 Invalid Request\r\nConnection: close\r\n\r\n" \ + "Invalid Request\n" \ + "

Invalid request

\n" + +#define OK_STR "HTTP/1.0 200 OK\r\nConnection: close\r\n\r\n" +#define OK_STR_HTML "HTTP/1.0 200 OK\r\nConnection: close\r\nContent-Type: text/html\r\n\r\n" + + + +static void httpProcessInput(rfbScreenInfoPtr screen); +static rfbBool compareAndSkip(char **ptr, const char *str); +static rfbBool parseParams(const char *request, char *result, int max_bytes); +static rfbBool validateString(char *str); + +#define BUF_SIZE 32768 + +static char buf[BUF_SIZE]; +static size_t buf_filled=0; + +/* + * httpInitSockets sets up the TCP socket to listen for HTTP connections. + */ + +void +rfbHttpInitSockets(rfbScreenInfoPtr rfbScreen) +{ + if (rfbScreen->httpInitDone) + return; + + rfbScreen->httpInitDone = TRUE; + + if (!rfbScreen->httpDir) + return; + + if (rfbScreen->httpPort == 0) { + rfbScreen->httpPort = rfbScreen->port-100; + } + + if ((rfbScreen->httpListenSock = + rfbListenOnTCPPort(rfbScreen->httpPort, rfbScreen->listenInterface)) < 0) { + rfbLogPerror("ListenOnTCPPort"); + return; + } + rfbLog("Listening for HTTP connections on TCP port %d\n", rfbScreen->httpPort); + rfbLog(" URL http://%s:%d\n",rfbScreen->thisHost,rfbScreen->httpPort); + +#ifdef LIBVNCSERVER_IPv6 + if (rfbScreen->http6Port == 0) { + rfbScreen->http6Port = rfbScreen->ipv6port-100; + } + + if ((rfbScreen->httpListen6Sock + = rfbListenOnTCP6Port(rfbScreen->http6Port, rfbScreen->listen6Interface)) < 0) { + /* ListenOnTCP6Port has its own detailed error printout */ + return; + } + rfbLog("Listening for HTTP connections on TCP6 port %d\n", rfbScreen->http6Port); + rfbLog(" URL http://%s:%d\n",rfbScreen->thisHost,rfbScreen->http6Port); +#endif +} + +void rfbHttpShutdownSockets(rfbScreenInfoPtr rfbScreen) { + if(rfbScreen->httpSock>-1) { + close(rfbScreen->httpSock); + FD_CLR(rfbScreen->httpSock,&rfbScreen->allFds); + rfbScreen->httpSock=-1; + } + + if(rfbScreen->httpListenSock>-1) { + close(rfbScreen->httpListenSock); + FD_CLR(rfbScreen->httpListenSock,&rfbScreen->allFds); + rfbScreen->httpListenSock=-1; + } + + if(rfbScreen->httpListen6Sock>-1) { + close(rfbScreen->httpListen6Sock); + FD_CLR(rfbScreen->httpListen6Sock,&rfbScreen->allFds); + rfbScreen->httpListen6Sock=-1; + } +} + +/* + * httpCheckFds is called from ProcessInputEvents to check for input on the + * HTTP socket(s). If there is input to process, httpProcessInput is called. + */ + +void +rfbHttpCheckFds(rfbScreenInfoPtr rfbScreen) +{ + int nfds; + fd_set fds; + struct timeval tv; +#ifdef LIBVNCSERVER_IPv6 + struct sockaddr_storage addr; +#else + struct sockaddr_in addr; +#endif + socklen_t addrlen = sizeof(addr); + + if (!rfbScreen->httpDir) + return; + + if (rfbScreen->httpListenSock < 0) + return; + + FD_ZERO(&fds); + FD_SET(rfbScreen->httpListenSock, &fds); + if (rfbScreen->httpListen6Sock >= 0) { + FD_SET(rfbScreen->httpListen6Sock, &fds); + } + if (rfbScreen->httpSock >= 0) { + FD_SET(rfbScreen->httpSock, &fds); + } + tv.tv_sec = 0; + tv.tv_usec = 0; + nfds = select(max(rfbScreen->httpListen6Sock, max(rfbScreen->httpSock,rfbScreen->httpListenSock)) + 1, &fds, NULL, NULL, &tv); + if (nfds == 0) { + return; + } + if (nfds < 0) { +#ifdef WIN32 + errno = WSAGetLastError(); +#endif + if (errno != EINTR) + rfbLogPerror("httpCheckFds: select"); + return; + } + + if ((rfbScreen->httpSock >= 0) && FD_ISSET(rfbScreen->httpSock, &fds)) { + httpProcessInput(rfbScreen); + } + + if (FD_ISSET(rfbScreen->httpListenSock, &fds) || FD_ISSET(rfbScreen->httpListen6Sock, &fds)) { + if (rfbScreen->httpSock >= 0) close(rfbScreen->httpSock); + + if(FD_ISSET(rfbScreen->httpListenSock, &fds)) { + if ((rfbScreen->httpSock = accept(rfbScreen->httpListenSock, (struct sockaddr *)&addr, &addrlen)) < 0) { + rfbLogPerror("httpCheckFds: accept"); + return; + } + } + else if(FD_ISSET(rfbScreen->httpListen6Sock, &fds)) { + if ((rfbScreen->httpSock = accept(rfbScreen->httpListen6Sock, (struct sockaddr *)&addr, &addrlen)) < 0) { + rfbLogPerror("httpCheckFds: accept"); + return; + } + } + +#ifdef USE_LIBWRAP + char host[1024]; +#ifdef LIBVNCSERVER_IPv6 + if(getnameinfo((struct sockaddr*)&addr, addrlen, host, sizeof(host), NULL, 0, NI_NUMERICHOST) != 0) { + rfbLogPerror("httpCheckFds: error in getnameinfo"); + host[0] = '\0'; + } +#else + memcpy(host, inet_ntoa(addr.sin_addr), sizeof(host)); +#endif + if(!hosts_ctl("vnc",STRING_UNKNOWN, host, + STRING_UNKNOWN)) { + rfbLog("Rejected HTTP connection from client %s\n", + host); + close(rfbScreen->httpSock); + rfbScreen->httpSock=-1; + return; + } +#endif + if(!rfbSetNonBlocking(rfbScreen->httpSock)) { + close(rfbScreen->httpSock); + rfbScreen->httpSock=-1; + return; + } + /*AddEnabledDevice(httpSock);*/ + } +} + + +static void +httpCloseSock(rfbScreenInfoPtr rfbScreen) +{ + close(rfbScreen->httpSock); + rfbScreen->httpSock = -1; + buf_filled = 0; +} + +static rfbClientRec cl; + +/* + * httpProcessInput is called when input is received on the HTTP socket. + */ + +static void +httpProcessInput(rfbScreenInfoPtr rfbScreen) +{ +#ifdef LIBVNCSERVER_IPv6 + struct sockaddr_storage addr; +#else + struct sockaddr_in addr; +#endif + socklen_t addrlen = sizeof(addr); + char fullFname[512]; + char params[1024]; + char *ptr; + char *fname; + unsigned int maxFnameLen; + FILE* fd; + rfbBool performSubstitutions = FALSE; + char str[256+32]; +#ifndef WIN32 + char* user=getenv("USER"); +#endif + + cl.sock=rfbScreen->httpSock; + + if (strlen(rfbScreen->httpDir) > 255) { + rfbErr("-httpd directory too long\n"); + httpCloseSock(rfbScreen); + return; + } + strcpy(fullFname, rfbScreen->httpDir); + fname = &fullFname[strlen(fullFname)]; + maxFnameLen = 511 - strlen(fullFname); + + buf_filled=0; + + /* Read data from the HTTP client until we get a complete request. */ + while (1) { + ssize_t got; + + if (buf_filled > sizeof (buf)) { + rfbErr("httpProcessInput: HTTP request is too long\n"); + httpCloseSock(rfbScreen); + return; + } + + got = read (rfbScreen->httpSock, buf + buf_filled, + sizeof (buf) - buf_filled - 1); + + if (got <= 0) { + if (got == 0) { + rfbErr("httpd: premature connection close\n"); + } else { +#ifdef WIN32 + errno=WSAGetLastError(); +#endif + if (errno == EAGAIN) { + return; + } + rfbLogPerror("httpProcessInput: read"); + } + httpCloseSock(rfbScreen); + return; + } + + buf_filled += got; + buf[buf_filled] = '\0'; + + /* Is it complete yet (is there a blank line)? */ + if (strstr (buf, "\r\r") || strstr (buf, "\n\n") || + strstr (buf, "\r\n\r\n") || strstr (buf, "\n\r\n\r")) + break; + } + + + /* Process the request. */ + if(rfbScreen->httpEnableProxyConnect) { + const static char* PROXY_OK_STR = "HTTP/1.0 200 OK\r\nContent-Type: octet-stream\r\nPragma: no-cache\r\n\r\n"; + if(!strncmp(buf, "CONNECT ", 8)) { + if(atoi(strchr(buf, ':')+1)!=rfbScreen->port) { + rfbErr("httpd: CONNECT format invalid.\n"); + rfbWriteExact(&cl,INVALID_REQUEST_STR, strlen(INVALID_REQUEST_STR)); + httpCloseSock(rfbScreen); + return; + } + /* proxy connection */ + rfbLog("httpd: client asked for CONNECT\n"); + rfbWriteExact(&cl,PROXY_OK_STR,strlen(PROXY_OK_STR)); + rfbNewClientConnection(rfbScreen,rfbScreen->httpSock); + rfbScreen->httpSock = -1; + return; + } + if (!strncmp(buf, "GET ",4) && !strncmp(strchr(buf,'/'),"/proxied.connection HTTP/1.", 27)) { + /* proxy connection */ + rfbLog("httpd: client asked for /proxied.connection\n"); + rfbWriteExact(&cl,PROXY_OK_STR,strlen(PROXY_OK_STR)); + rfbNewClientConnection(rfbScreen,rfbScreen->httpSock); + rfbScreen->httpSock = -1; + return; + } + } + + if (strncmp(buf, "GET ", 4)) { + rfbErr("httpd: no GET line\n"); + httpCloseSock(rfbScreen); + return; + } else { + /* Only use the first line. */ + buf[strcspn(buf, "\n\r")] = '\0'; + } + + if (strlen(buf) > maxFnameLen) { + rfbErr("httpd: GET line too long\n"); + httpCloseSock(rfbScreen); + return; + } + + if (sscanf(buf, "GET %s HTTP/1.", fname) != 1) { + rfbErr("httpd: couldn't parse GET line\n"); + httpCloseSock(rfbScreen); + return; + } + + if (fname[0] != '/') { + rfbErr("httpd: filename didn't begin with '/'\n"); + rfbWriteExact(&cl, NOT_FOUND_STR, strlen(NOT_FOUND_STR)); + httpCloseSock(rfbScreen); + return; + } + + + getpeername(rfbScreen->httpSock, (struct sockaddr *)&addr, &addrlen); +#ifdef LIBVNCSERVER_IPv6 + char host[1024]; + if(getnameinfo((struct sockaddr*)&addr, addrlen, host, sizeof(host), NULL, 0, NI_NUMERICHOST) != 0) { + rfbLogPerror("httpProcessInput: error in getnameinfo"); + } + rfbLog("httpd: get '%s' for %s\n", fname+1, host); +#else + rfbLog("httpd: get '%s' for %s\n", fname+1, + inet_ntoa(addr.sin_addr)); +#endif + + /* Extract parameters from the URL string if necessary */ + + params[0] = '\0'; + ptr = strchr(fname, '?'); + if (ptr != NULL) { + *ptr = '\0'; + if (!parseParams(&ptr[1], params, 1024)) { + params[0] = '\0'; + rfbErr("httpd: bad parameters in the URL\n"); + } + } + + + /* If we were asked for '/', actually read the file index.vnc */ + + if (strcmp(fname, "/") == 0) { + strcpy(fname, "/index.vnc"); + rfbLog("httpd: defaulting to '%s'\n", fname+1); + } + + /* Substitutions are performed on files ending .vnc */ + + if (strlen(fname) >= 4 && strcmp(&fname[strlen(fname)-4], ".vnc") == 0) { + performSubstitutions = TRUE; + } + + /* Open the file */ + + if ((fd = fopen(fullFname, "r")) == 0) { + rfbLogPerror("httpProcessInput: open"); + rfbWriteExact(&cl, NOT_FOUND_STR, strlen(NOT_FOUND_STR)); + httpCloseSock(rfbScreen); + return; + } + + if(performSubstitutions) /* is the 'index.vnc' file */ + rfbWriteExact(&cl, OK_STR_HTML, strlen(OK_STR_HTML)); + else + rfbWriteExact(&cl, OK_STR, strlen(OK_STR)); + + while (1) { + int n = fread(buf, 1, BUF_SIZE-1, fd); + if (n < 0) { + rfbLogPerror("httpProcessInput: read"); + fclose(fd); + httpCloseSock(rfbScreen); + return; + } + + if (n == 0) + break; + + if (performSubstitutions) { + + /* Substitute $WIDTH, $HEIGHT, etc with the appropriate values. + This won't quite work properly if the .vnc file is longer than + BUF_SIZE, but it's reasonable to assume that .vnc files will + always be short. */ + + char *ptr = buf; + char *dollar; + buf[n] = 0; /* make sure it's null-terminated */ + + while ((dollar = strchr(ptr, '$'))!=NULL) { + rfbWriteExact(&cl, ptr, (dollar - ptr)); + + ptr = dollar; + + if (compareAndSkip(&ptr, "$WIDTH")) { + + sprintf(str, "%d", rfbScreen->width); + rfbWriteExact(&cl, str, strlen(str)); + + } else if (compareAndSkip(&ptr, "$HEIGHT")) { + + sprintf(str, "%d", rfbScreen->height); + rfbWriteExact(&cl, str, strlen(str)); + + } else if (compareAndSkip(&ptr, "$APPLETWIDTH")) { + + sprintf(str, "%d", rfbScreen->width); + rfbWriteExact(&cl, str, strlen(str)); + + } else if (compareAndSkip(&ptr, "$APPLETHEIGHT")) { + + sprintf(str, "%d", rfbScreen->height + 32); + rfbWriteExact(&cl, str, strlen(str)); + + } else if (compareAndSkip(&ptr, "$PORT")) { + + sprintf(str, "%d", rfbScreen->port); + rfbWriteExact(&cl, str, strlen(str)); + + } else if (compareAndSkip(&ptr, "$DESKTOP")) { + + rfbWriteExact(&cl, rfbScreen->desktopName, strlen(rfbScreen->desktopName)); + + } else if (compareAndSkip(&ptr, "$DISPLAY")) { + + sprintf(str, "%s:%d", rfbScreen->thisHost, rfbScreen->port-5900); + rfbWriteExact(&cl, str, strlen(str)); + + } else if (compareAndSkip(&ptr, "$USER")) { +#ifndef WIN32 + if (user) { + rfbWriteExact(&cl, user, + strlen(user)); + } else +#endif + rfbWriteExact(&cl, "?", 1); + } else if (compareAndSkip(&ptr, "$PARAMS")) { + if (params[0] != '\0') + rfbWriteExact(&cl, params, strlen(params)); + } else { + if (!compareAndSkip(&ptr, "$$")) + ptr++; + + if (rfbWriteExact(&cl, "$", 1) < 0) { + fclose(fd); + httpCloseSock(rfbScreen); + return; + } + } + } + if (rfbWriteExact(&cl, ptr, (&buf[n] - ptr)) < 0) + break; + + } else { + + /* For files not ending .vnc, just write out the buffer */ + + if (rfbWriteExact(&cl, buf, n) < 0) + break; + } + } + + fclose(fd); + httpCloseSock(rfbScreen); +} + + +static rfbBool +compareAndSkip(char **ptr, const char *str) +{ + if (strncmp(*ptr, str, strlen(str)) == 0) { + *ptr += strlen(str); + return TRUE; + } + + return FALSE; +} + +/* + * Parse the request tail after the '?' character, and format a sequence + * of tags for inclusion into an HTML page with embedded applet. + */ + +static rfbBool +parseParams(const char *request, char *result, int max_bytes) +{ + char param_request[128]; + char param_formatted[196]; + const char *tail; + char *delim_ptr; + char *value_str; + int cur_bytes, len; + + result[0] = '\0'; + cur_bytes = 0; + + tail = request; + for (;;) { + /* Copy individual "name=value" string into a buffer */ + delim_ptr = strchr((char *)tail, '&'); + if (delim_ptr == NULL) { + if (strlen(tail) >= sizeof(param_request)) { + return FALSE; + } + strcpy(param_request, tail); + } else { + len = delim_ptr - tail; + if (len >= sizeof(param_request)) { + return FALSE; + } + memcpy(param_request, tail, len); + param_request[len] = '\0'; + } + + /* Split the request into parameter name and value */ + value_str = strchr(¶m_request[1], '='); + if (value_str == NULL) { + return FALSE; + } + *value_str++ = '\0'; + if (strlen(value_str) == 0) { + return FALSE; + } + + /* Validate both parameter name and value */ + if (!validateString(param_request) || !validateString(value_str)) { + return FALSE; + } + + /* Prepare HTML-formatted representation of the name=value pair */ + len = sprintf(param_formatted, + "\n", + param_request, value_str); + if (cur_bytes + len + 1 > max_bytes) { + return FALSE; + } + strcat(result, param_formatted); + cur_bytes += len; + + /* Go to the next parameter */ + if (delim_ptr == NULL) { + break; + } + tail = delim_ptr + 1; + } + return TRUE; +} + +/* + * Check if the string consists only of alphanumeric characters, '+' + * signs, underscores, dots, colons and square brackets. + * Replace all '+' signs with spaces. + */ + +static rfbBool +validateString(char *str) +{ + char *ptr; + + for (ptr = str; *ptr != '\0'; ptr++) { + if (!isalnum(*ptr) && *ptr != '_' && *ptr != '.' + && *ptr != ':' && *ptr != '[' && *ptr != ']' ) { + if (*ptr == '+') { + *ptr = ' '; + } else { + return FALSE; + } + } + } + return TRUE; +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/main.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/main.c new file mode 100644 index 0000000..4cb18ac --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/main.c @@ -0,0 +1,1197 @@ +/* + * This file is called main.c, because it contains most of the new functions + * for use with LibVNCServer. + * + * LibVNCServer (C) 2001 Johannes E. Schindelin + * Original OSXvnc (C) 2001 Dan McGuirk . + * Original Xvnc (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * see GPL (latest version) for full details + */ + +#ifdef __STRICT_ANSI__ +#define _BSD_SOURCE +#endif +#include +#include +#include "private.h" + +#include +#include + +#ifndef false +#define false 0 +#define true -1 +#endif + +#ifdef LIBVNCSERVER_HAVE_SYS_TYPES_H +#include +#endif + +#ifndef WIN32 +#include +#include +#include +#endif + +#include +#include + +static int extMutex_initialized = 0; +static int logMutex_initialized = 0; +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD +static MUTEX(logMutex); +static MUTEX(extMutex); +#endif + +static int rfbEnableLogging=1; + +#ifdef LIBVNCSERVER_WORDS_BIGENDIAN +char rfbEndianTest = (1==0); +#else +char rfbEndianTest = (1==1); +#endif + +/* + * Protocol extensions + */ + +static rfbProtocolExtension* rfbExtensionHead = NULL; + +/* + * This method registers a list of new extensions. + * It avoids same extension getting registered multiple times. + * The order is not preserved if multiple extensions are + * registered at one-go. + */ +void +rfbRegisterProtocolExtension(rfbProtocolExtension* extension) +{ + rfbProtocolExtension *head = rfbExtensionHead, *next = NULL; + + if(extension == NULL) + return; + + next = extension->next; + + if (! extMutex_initialized) { + INIT_MUTEX(extMutex); + extMutex_initialized = 1; + } + + LOCK(extMutex); + + while(head != NULL) { + if(head == extension) { + UNLOCK(extMutex); + rfbRegisterProtocolExtension(next); + return; + } + + head = head->next; + } + + extension->next = rfbExtensionHead; + rfbExtensionHead = extension; + + UNLOCK(extMutex); + rfbRegisterProtocolExtension(next); +} + +/* + * This method unregisters a list of extensions. + * These extensions won't be available for any new + * client connection. + */ +void +rfbUnregisterProtocolExtension(rfbProtocolExtension* extension) +{ + + rfbProtocolExtension *cur = NULL, *pre = NULL; + + if(extension == NULL) + return; + + if (! extMutex_initialized) { + INIT_MUTEX(extMutex); + extMutex_initialized = 1; + } + + LOCK(extMutex); + + if(rfbExtensionHead == extension) { + rfbExtensionHead = rfbExtensionHead->next; + UNLOCK(extMutex); + rfbUnregisterProtocolExtension(extension->next); + return; + } + + cur = pre = rfbExtensionHead; + + while(cur) { + if(cur == extension) { + pre->next = cur->next; + break; + } + pre = cur; + cur = cur->next; + } + + UNLOCK(extMutex); + + rfbUnregisterProtocolExtension(extension->next); +} + +rfbProtocolExtension* rfbGetExtensionIterator() +{ + if (! extMutex_initialized) { + INIT_MUTEX(extMutex); + extMutex_initialized = 1; + } + + LOCK(extMutex); + return rfbExtensionHead; +} + +void rfbReleaseExtensionIterator() +{ + UNLOCK(extMutex); +} + +rfbBool rfbEnableExtension(rfbClientPtr cl, rfbProtocolExtension* extension, + void* data) +{ + rfbExtensionData* extData; + + /* make sure extension is not yet enabled. */ + for(extData = cl->extensions; extData; extData = extData->next) + if(extData->extension == extension) + return FALSE; + + extData = calloc(sizeof(rfbExtensionData),1); + extData->extension = extension; + extData->data = data; + extData->next = cl->extensions; + cl->extensions = extData; + + return TRUE; +} + +rfbBool rfbDisableExtension(rfbClientPtr cl, rfbProtocolExtension* extension) +{ + rfbExtensionData* extData; + rfbExtensionData* prevData = NULL; + + for(extData = cl->extensions; extData; extData = extData->next) { + if(extData->extension == extension) { + if(extData->data) + free(extData->data); + if(prevData == NULL) + cl->extensions = extData->next; + else + prevData->next = extData->next; + return TRUE; + } + prevData = extData; + } + + return FALSE; +} + +void* rfbGetExtensionClientData(rfbClientPtr cl, rfbProtocolExtension* extension) +{ + rfbExtensionData* data = cl->extensions; + + while(data && data->extension != extension) + data = data->next; + + if(data == NULL) { + rfbLog("Extension is not enabled !\n"); + /* rfbCloseClient(cl); */ + return NULL; + } + + return data->data; +} + +/* + * Logging + */ + +void rfbLogEnable(int enabled) { + rfbEnableLogging=enabled; +} + +/* + * rfbLog prints a time-stamped message to the log file (stderr). + */ + +static void +rfbDefaultLog(const char *format, ...) +{ + va_list args; + char buf[256]; + time_t log_clock; + + if(!rfbEnableLogging) + return; + + if (! logMutex_initialized) { + INIT_MUTEX(logMutex); + logMutex_initialized = 1; + } + + LOCK(logMutex); + va_start(args, format); + + time(&log_clock); + strftime(buf, 255, "%d/%m/%Y %X ", localtime(&log_clock)); + fprintf(stderr, "%s", buf); + + vfprintf(stderr, format, args); + fflush(stderr); + + va_end(args); + UNLOCK(logMutex); +} + +rfbLogProc rfbLog=rfbDefaultLog; +rfbLogProc rfbErr=rfbDefaultLog; + +void rfbLogPerror(const char *str) +{ + rfbErr("%s: %s\n", str, strerror(errno)); +} + +void rfbScheduleCopyRegion(rfbScreenInfoPtr rfbScreen,sraRegionPtr copyRegion,int dx,int dy) +{ + rfbClientIteratorPtr iterator; + rfbClientPtr cl; + + iterator=rfbGetClientIterator(rfbScreen); + while((cl=rfbClientIteratorNext(iterator))) { + LOCK(cl->updateMutex); + if(cl->useCopyRect) { + sraRegionPtr modifiedRegionBackup; + if(!sraRgnEmpty(cl->copyRegion)) { + if(cl->copyDX!=dx || cl->copyDY!=dy) { + /* if a copyRegion was not yet executed, treat it as a + * modifiedRegion. The idea: in this case it could be + * source of the new copyRect or modified anyway. */ + sraRgnOr(cl->modifiedRegion,cl->copyRegion); + sraRgnMakeEmpty(cl->copyRegion); + } else { + /* we have to set the intersection of the source of the copy + * and the old copy to modified. */ + modifiedRegionBackup=sraRgnCreateRgn(copyRegion); + sraRgnOffset(modifiedRegionBackup,-dx,-dy); + sraRgnAnd(modifiedRegionBackup,cl->copyRegion); + sraRgnOr(cl->modifiedRegion,modifiedRegionBackup); + sraRgnDestroy(modifiedRegionBackup); + } + } + + sraRgnOr(cl->copyRegion,copyRegion); + cl->copyDX = dx; + cl->copyDY = dy; + + /* if there were modified regions, which are now copied, + * mark them as modified, because the source of these can be overlapped + * either by new modified or now copied regions. */ + modifiedRegionBackup=sraRgnCreateRgn(cl->modifiedRegion); + sraRgnOffset(modifiedRegionBackup,dx,dy); + sraRgnAnd(modifiedRegionBackup,cl->copyRegion); + sraRgnOr(cl->modifiedRegion,modifiedRegionBackup); + sraRgnDestroy(modifiedRegionBackup); + + if(!cl->enableCursorShapeUpdates) { + /* + * n.b. (dx, dy) is the vector pointing in the direction the + * copyrect displacement will take place. copyRegion is the + * destination rectangle (say), not the source rectangle. + */ + sraRegionPtr cursorRegion; + int x = cl->cursorX - cl->screen->cursor->xhot; + int y = cl->cursorY - cl->screen->cursor->yhot; + int w = cl->screen->cursor->width; + int h = cl->screen->cursor->height; + + cursorRegion = sraRgnCreateRect(x, y, x + w, y + h); + sraRgnAnd(cursorRegion, cl->copyRegion); + if(!sraRgnEmpty(cursorRegion)) { + /* + * current cursor rect overlaps with the copy region *dest*, + * mark it as modified since we won't copy-rect stuff to it. + */ + sraRgnOr(cl->modifiedRegion, cursorRegion); + } + sraRgnDestroy(cursorRegion); + + cursorRegion = sraRgnCreateRect(x, y, x + w, y + h); + /* displace it to check for overlap with copy region source: */ + sraRgnOffset(cursorRegion, dx, dy); + sraRgnAnd(cursorRegion, cl->copyRegion); + if(!sraRgnEmpty(cursorRegion)) { + /* + * current cursor rect overlaps with the copy region *source*, + * mark the *displaced* cursorRegion as modified since we + * won't copyrect stuff to it. + */ + sraRgnOr(cl->modifiedRegion, cursorRegion); + } + sraRgnDestroy(cursorRegion); + } + + } else { + sraRgnOr(cl->modifiedRegion,copyRegion); + } + TSIGNAL(cl->updateCond); + UNLOCK(cl->updateMutex); + } + + rfbReleaseClientIterator(iterator); +} + +void rfbDoCopyRegion(rfbScreenInfoPtr screen,sraRegionPtr copyRegion,int dx,int dy) +{ + sraRectangleIterator* i; + sraRect rect; + int j,widthInBytes,bpp=screen->serverFormat.bitsPerPixel/8, + rowstride=screen->paddedWidthInBytes; + char *in,*out; + + /* copy it, really */ + i = sraRgnGetReverseIterator(copyRegion,dx<0,dy<0); + while(sraRgnIteratorNext(i,&rect)) { + widthInBytes = (rect.x2-rect.x1)*bpp; + out = screen->frameBuffer+rect.x1*bpp+rect.y1*rowstride; + in = screen->frameBuffer+(rect.x1-dx)*bpp+(rect.y1-dy)*rowstride; + if(dy<0) + for(j=rect.y1;j=rect.y1;j--,out-=rowstride,in-=rowstride) + memmove(out,in,widthInBytes); + } + } + sraRgnReleaseIterator(i); + + rfbScheduleCopyRegion(screen,copyRegion,dx,dy); +} + +void rfbDoCopyRect(rfbScreenInfoPtr screen,int x1,int y1,int x2,int y2,int dx,int dy) +{ + sraRegionPtr region = sraRgnCreateRect(x1,y1,x2,y2); + rfbDoCopyRegion(screen,region,dx,dy); + sraRgnDestroy(region); +} + +void rfbScheduleCopyRect(rfbScreenInfoPtr screen,int x1,int y1,int x2,int y2,int dx,int dy) +{ + sraRegionPtr region = sraRgnCreateRect(x1,y1,x2,y2); + rfbScheduleCopyRegion(screen,region,dx,dy); + sraRgnDestroy(region); +} + +void rfbMarkRegionAsModified(rfbScreenInfoPtr screen,sraRegionPtr modRegion) +{ + rfbClientIteratorPtr iterator; + rfbClientPtr cl; + + iterator=rfbGetClientIterator(screen); + while((cl=rfbClientIteratorNext(iterator))) { + LOCK(cl->updateMutex); + sraRgnOr(cl->modifiedRegion,modRegion); + TSIGNAL(cl->updateCond); + UNLOCK(cl->updateMutex); + } + + rfbReleaseClientIterator(iterator); +} + +void rfbScaledScreenUpdate(rfbScreenInfoPtr screen, int x1, int y1, int x2, int y2); +void rfbMarkRectAsModified(rfbScreenInfoPtr screen,int x1,int y1,int x2,int y2) +{ + sraRegionPtr region; + int i; + + if(x1>x2) { i=x1; x1=x2; x2=i; } + if(x1<0) x1=0; + if(x2>screen->width) x2=screen->width; + if(x1==x2) return; + + if(y1>y2) { i=y1; y1=y2; y2=i; } + if(y1<0) y1=0; + if(y2>screen->height) y2=screen->height; + if(y1==y2) return; + + /* update scaled copies for this rectangle */ + rfbScaledScreenUpdate(screen,x1,y1,x2,y2); + + region = sraRgnCreateRect(x1,y1,x2,y2); + rfbMarkRegionAsModified(screen,region); + sraRgnDestroy(region); +} + +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD +#include + +static void * +clientOutput(void *data) +{ + rfbClientPtr cl = (rfbClientPtr)data; + rfbBool haveUpdate; + sraRegion* updateRegion; + + while (1) { + haveUpdate = false; + while (!haveUpdate) { + if (cl->sock == -1) { + /* Client has disconnected. */ + return NULL; + } + if (cl->state != RFB_NORMAL || cl->onHold) { + /* just sleep until things get normal */ + usleep(cl->screen->deferUpdateTime * 1000); + continue; + } + + LOCK(cl->updateMutex); + + if (sraRgnEmpty(cl->requestedRegion)) { + ; /* always require a FB Update Request (otherwise can crash.) */ + } else { + haveUpdate = FB_UPDATE_PENDING(cl); + if(!haveUpdate) { + updateRegion = sraRgnCreateRgn(cl->modifiedRegion); + haveUpdate = sraRgnAnd(updateRegion,cl->requestedRegion); + sraRgnDestroy(updateRegion); + } + } + + if (!haveUpdate) { + WAIT(cl->updateCond, cl->updateMutex); + } + + UNLOCK(cl->updateMutex); + } + + /* OK, now, to save bandwidth, wait a little while for more + updates to come along. */ + usleep(cl->screen->deferUpdateTime * 1000); + + /* Now, get the region we're going to update, and remove + it from cl->modifiedRegion _before_ we send the update. + That way, if anything that overlaps the region we're sending + is updated, we'll be sure to do another update later. */ + LOCK(cl->updateMutex); + updateRegion = sraRgnCreateRgn(cl->modifiedRegion); + UNLOCK(cl->updateMutex); + + /* Now actually send the update. */ + rfbIncrClientRef(cl); + LOCK(cl->sendMutex); + rfbSendFramebufferUpdate(cl, updateRegion); + UNLOCK(cl->sendMutex); + rfbDecrClientRef(cl); + + sraRgnDestroy(updateRegion); + } + + /* Not reached. */ + return NULL; +} + +static void * +clientInput(void *data) +{ + rfbClientPtr cl = (rfbClientPtr)data; + pthread_t output_thread; + pthread_create(&output_thread, NULL, clientOutput, (void *)cl); + + while (1) { + fd_set rfds, wfds, efds; + struct timeval tv; + int n; + + if (cl->sock == -1) { + /* Client has disconnected. */ + break; + } + + FD_ZERO(&rfds); + FD_SET(cl->sock, &rfds); + FD_ZERO(&efds); + FD_SET(cl->sock, &efds); + + /* Are we transferring a file in the background? */ + FD_ZERO(&wfds); + if ((cl->fileTransfer.fd!=-1) && (cl->fileTransfer.sending==1)) + FD_SET(cl->sock, &wfds); + + tv.tv_sec = 60; /* 1 minute */ + tv.tv_usec = 0; + n = select(cl->sock + 1, &rfds, &wfds, &efds, &tv); + if (n < 0) { + rfbLogPerror("ReadExact: select"); + break; + } + if (n == 0) /* timeout */ + { + rfbSendFileTransferChunk(cl); + continue; + } + + /* We have some space on the transmit queue, send some data */ + if (FD_ISSET(cl->sock, &wfds)) + rfbSendFileTransferChunk(cl); + + if (FD_ISSET(cl->sock, &rfds) || FD_ISSET(cl->sock, &efds)) + rfbProcessClientMessage(cl); + } + + /* Get rid of the output thread. */ + LOCK(cl->updateMutex); + TSIGNAL(cl->updateCond); + UNLOCK(cl->updateMutex); + IF_PTHREADS(pthread_join(output_thread, NULL)); + + rfbClientConnectionGone(cl); + + return NULL; +} + +static void* +listenerRun(void *data) +{ + rfbScreenInfoPtr screen=(rfbScreenInfoPtr)data; + int client_fd; + struct sockaddr_storage peer; + rfbClientPtr cl = NULL; + socklen_t len; + fd_set listen_fds; /* temp file descriptor list for select() */ + + /* TODO: this thread wont die by restarting the server */ + /* TODO: HTTP is not handled */ + while (1) { + client_fd = -1; + FD_ZERO(&listen_fds); + if(screen->listenSock >= 0) + FD_SET(screen->listenSock, &listen_fds); + if(screen->listen6Sock >= 0) + FD_SET(screen->listen6Sock, &listen_fds); + + if (select(screen->maxFd+1, &listen_fds, NULL, NULL, NULL) == -1) { + rfbLogPerror("listenerRun: error in select"); + return NULL; + } + + /* there is something on the listening sockets, handle new connections */ + len = sizeof (peer); + if (FD_ISSET(screen->listenSock, &listen_fds)) + client_fd = accept(screen->listenSock, (struct sockaddr*)&peer, &len); + else if (FD_ISSET(screen->listen6Sock, &listen_fds)) + client_fd = accept(screen->listen6Sock, (struct sockaddr*)&peer, &len); + + if(client_fd >= 0) + cl = rfbNewClient(screen,client_fd); + if (cl && !cl->onHold ) + rfbStartOnHoldClient(cl); + } + return(NULL); +} + +void +rfbStartOnHoldClient(rfbClientPtr cl) +{ + pthread_create(&cl->client_thread, NULL, clientInput, (void *)cl); +} + +#else + +void +rfbStartOnHoldClient(rfbClientPtr cl) +{ + cl->onHold = FALSE; +} + +#endif + +void +rfbRefuseOnHoldClient(rfbClientPtr cl) +{ + rfbCloseClient(cl); + rfbClientConnectionGone(cl); +} + +static void +rfbDefaultKbdAddEvent(rfbBool down, rfbKeySym keySym, rfbClientPtr cl) +{ +} + +void +rfbDefaultPtrAddEvent(int buttonMask, int x, int y, rfbClientPtr cl) +{ + rfbClientIteratorPtr iterator; + rfbClientPtr other_client; + rfbScreenInfoPtr s = cl->screen; + + if (x != s->cursorX || y != s->cursorY) { + LOCK(s->cursorMutex); + s->cursorX = x; + s->cursorY = y; + UNLOCK(s->cursorMutex); + + /* The cursor was moved by this client, so don't send CursorPos. */ + if (cl->enableCursorPosUpdates) + cl->cursorWasMoved = FALSE; + + /* But inform all remaining clients about this cursor movement. */ + iterator = rfbGetClientIterator(s); + while ((other_client = rfbClientIteratorNext(iterator)) != NULL) { + if (other_client != cl && other_client->enableCursorPosUpdates) { + other_client->cursorWasMoved = TRUE; + } + } + rfbReleaseClientIterator(iterator); + } +} + +static void rfbDefaultSetXCutText(char* text, int len, rfbClientPtr cl) +{ +} + +/* TODO: add a nice VNC or RFB cursor */ + +#if defined(WIN32) || defined(sparc) || !defined(NO_STRICT_ANSI) +static rfbCursor myCursor = +{ + FALSE, FALSE, FALSE, FALSE, + (unsigned char*)"\000\102\044\030\044\102\000", + (unsigned char*)"\347\347\176\074\176\347\347", + 8, 7, 3, 3, + 0, 0, 0, + 0xffff, 0xffff, 0xffff, + NULL +}; +#else +static rfbCursor myCursor = +{ + cleanup: FALSE, + cleanupSource: FALSE, + cleanupMask: FALSE, + cleanupRichSource: FALSE, + source: "\000\102\044\030\044\102\000", + mask: "\347\347\176\074\176\347\347", + width: 8, height: 7, xhot: 3, yhot: 3, + foreRed: 0, foreGreen: 0, foreBlue: 0, + backRed: 0xffff, backGreen: 0xffff, backBlue: 0xffff, + richSource: NULL +}; +#endif + +static rfbCursorPtr rfbDefaultGetCursorPtr(rfbClientPtr cl) +{ + return(cl->screen->cursor); +} + +/* response is cl->authChallenge vncEncrypted with passwd */ +static rfbBool rfbDefaultPasswordCheck(rfbClientPtr cl,const char* response,int len) +{ + int i; + char *passwd=rfbDecryptPasswdFromFile(cl->screen->authPasswdData); + + if(!passwd) { + rfbErr("Couldn't read password file: %s\n",cl->screen->authPasswdData); + return(FALSE); + } + + rfbEncryptBytes(cl->authChallenge, passwd); + + /* Lose the password from memory */ + for (i = strlen(passwd); i >= 0; i--) { + passwd[i] = '\0'; + } + + free(passwd); + + if (memcmp(cl->authChallenge, response, len) != 0) { + rfbErr("authProcessClientMessage: authentication failed from %s\n", + cl->host); + return(FALSE); + } + + return(TRUE); +} + +/* for this method, authPasswdData is really a pointer to an array + of char*'s, where the last pointer is 0. */ +rfbBool rfbCheckPasswordByList(rfbClientPtr cl,const char* response,int len) +{ + char **passwds; + int i=0; + + for(passwds=(char**)cl->screen->authPasswdData;*passwds;passwds++,i++) { + uint8_t auth_tmp[CHALLENGESIZE]; + memcpy((char *)auth_tmp, (char *)cl->authChallenge, CHALLENGESIZE); + rfbEncryptBytes(auth_tmp, *passwds); + + if (memcmp(auth_tmp, response, len) == 0) { + if(i>=cl->screen->authPasswdFirstViewOnly) + cl->viewOnly=TRUE; + return(TRUE); + } + } + + rfbErr("authProcessClientMessage: authentication failed from %s\n", + cl->host); + return(FALSE); +} + +void rfbDoNothingWithClient(rfbClientPtr cl) +{ +} + +static enum rfbNewClientAction rfbDefaultNewClientHook(rfbClientPtr cl) +{ + return RFB_CLIENT_ACCEPT; +} + +/* + * Update server's pixel format in screenInfo structure. This + * function is called from rfbGetScreen() and rfbNewFramebuffer(). + */ + +static void rfbInitServerFormat(rfbScreenInfoPtr screen, int bitsPerSample) +{ + rfbPixelFormat* format=&screen->serverFormat; + + format->bitsPerPixel = screen->bitsPerPixel; + format->depth = screen->depth; + format->bigEndian = rfbEndianTest?FALSE:TRUE; + format->trueColour = TRUE; + screen->colourMap.count = 0; + screen->colourMap.is16 = 0; + screen->colourMap.data.bytes = NULL; + + if (format->bitsPerPixel == 8) { + format->redMax = 7; + format->greenMax = 7; + format->blueMax = 3; + format->redShift = 0; + format->greenShift = 3; + format->blueShift = 6; + } else { + format->redMax = (1 << bitsPerSample) - 1; + format->greenMax = (1 << bitsPerSample) - 1; + format->blueMax = (1 << bitsPerSample) - 1; + if(rfbEndianTest) { + format->redShift = 0; + format->greenShift = bitsPerSample; + format->blueShift = bitsPerSample * 2; + } else { + if(format->bitsPerPixel==8*3) { + format->redShift = bitsPerSample*2; + format->greenShift = bitsPerSample*1; + format->blueShift = 0; + } else { + format->redShift = bitsPerSample*3; + format->greenShift = bitsPerSample*2; + format->blueShift = bitsPerSample; + } + } + } +} + +rfbScreenInfoPtr rfbGetScreen(int* argc,char** argv, + int width,int height,int bitsPerSample,int samplesPerPixel, + int bytesPerPixel) +{ + rfbScreenInfoPtr screen=calloc(sizeof(rfbScreenInfo),1); + + if (! logMutex_initialized) { + INIT_MUTEX(logMutex); + logMutex_initialized = 1; + } + + + if(width&3) + rfbErr("WARNING: Width (%d) is not a multiple of 4. VncViewer has problems with that.\n",width); + + screen->autoPort=FALSE; + screen->clientHead=NULL; + screen->pointerClient=NULL; + screen->port=5900; + screen->ipv6port=5900; + screen->socketState=RFB_SOCKET_INIT; + + screen->inetdInitDone = FALSE; + screen->inetdSock=-1; + + screen->udpSock=-1; + screen->udpSockConnected=FALSE; + screen->udpPort=0; + screen->udpClient=NULL; + + screen->maxFd=0; + screen->listenSock=-1; + screen->listen6Sock=-1; + + screen->httpInitDone=FALSE; + screen->httpEnableProxyConnect=FALSE; + screen->httpPort=0; + screen->http6Port=0; + screen->httpDir=NULL; + screen->httpListenSock=-1; + screen->httpListen6Sock=-1; + screen->httpSock=-1; + + screen->desktopName = "LibVNCServer"; + screen->alwaysShared = FALSE; + screen->neverShared = FALSE; + screen->dontDisconnect = FALSE; + screen->authPasswdData = NULL; + screen->authPasswdFirstViewOnly = 1; + + screen->width = width; + screen->height = height; + screen->bitsPerPixel = screen->depth = 8*bytesPerPixel; + + screen->passwordCheck = rfbDefaultPasswordCheck; + + screen->ignoreSIGPIPE = TRUE; + + /* disable progressive updating per default */ + screen->progressiveSliceHeight = 0; + + screen->listenInterface = htonl(INADDR_ANY); + + screen->deferUpdateTime=5; + screen->maxRectsPerUpdate=50; + + screen->handleEventsEagerly = FALSE; + + screen->protocolMajorVersion = rfbProtocolMajorVersion; + screen->protocolMinorVersion = rfbProtocolMinorVersion; + + screen->permitFileTransfer = FALSE; + + if(!rfbProcessArguments(screen,argc,argv)) { + free(screen); + return NULL; + } + +#ifdef WIN32 + { + DWORD dummy=255; + GetComputerName(screen->thisHost,&dummy); + } +#else + gethostname(screen->thisHost, 255); +#endif + + screen->paddedWidthInBytes = width*bytesPerPixel; + + /* format */ + + rfbInitServerFormat(screen, bitsPerSample); + + /* cursor */ + + screen->cursorX=screen->cursorY=screen->underCursorBufferLen=0; + screen->underCursorBuffer=NULL; + screen->dontConvertRichCursorToXCursor = FALSE; + screen->cursor = &myCursor; + INIT_MUTEX(screen->cursorMutex); + + IF_PTHREADS(screen->backgroundLoop = FALSE); + + /* proc's and hook's */ + + screen->kbdAddEvent = rfbDefaultKbdAddEvent; + screen->kbdReleaseAllKeys = rfbDoNothingWithClient; + screen->ptrAddEvent = rfbDefaultPtrAddEvent; + screen->setXCutText = rfbDefaultSetXCutText; + screen->getCursorPtr = rfbDefaultGetCursorPtr; + screen->setTranslateFunction = rfbSetTranslateFunction; + screen->newClientHook = rfbDefaultNewClientHook; + screen->displayHook = NULL; + screen->displayFinishedHook = NULL; + screen->getKeyboardLedStateHook = NULL; + screen->xvpHook = NULL; + + /* initialize client list and iterator mutex */ + rfbClientListInit(screen); + + return(screen); +} + +/* + * Switch to another framebuffer (maybe of different size and color + * format). Clients supporting NewFBSize pseudo-encoding will change + * their local framebuffer dimensions if necessary. + * NOTE: Rich cursor data should be converted to new pixel format by + * the caller. + */ + +void rfbNewFramebuffer(rfbScreenInfoPtr screen, char *framebuffer, + int width, int height, + int bitsPerSample, int samplesPerPixel, + int bytesPerPixel) +{ + rfbPixelFormat old_format; + rfbBool format_changed = FALSE; + rfbClientIteratorPtr iterator; + rfbClientPtr cl; + + /* Update information in the screenInfo structure */ + + old_format = screen->serverFormat; + + if (width & 3) + rfbErr("WARNING: New width (%d) is not a multiple of 4.\n", width); + + screen->width = width; + screen->height = height; + screen->bitsPerPixel = screen->depth = 8*bytesPerPixel; + screen->paddedWidthInBytes = width*bytesPerPixel; + + rfbInitServerFormat(screen, bitsPerSample); + + if (memcmp(&screen->serverFormat, &old_format, + sizeof(rfbPixelFormat)) != 0) { + format_changed = TRUE; + } + + screen->frameBuffer = framebuffer; + + /* Adjust pointer position if necessary */ + + if (screen->cursorX >= width) + screen->cursorX = width - 1; + if (screen->cursorY >= height) + screen->cursorY = height - 1; + + /* For each client: */ + iterator = rfbGetClientIterator(screen); + while ((cl = rfbClientIteratorNext(iterator)) != NULL) { + + /* Re-install color translation tables if necessary */ + + if (format_changed) + screen->setTranslateFunction(cl); + + /* Mark the screen contents as changed, and schedule sending + NewFBSize message if supported by this client. */ + + LOCK(cl->updateMutex); + sraRgnDestroy(cl->modifiedRegion); + cl->modifiedRegion = sraRgnCreateRect(0, 0, width, height); + sraRgnMakeEmpty(cl->copyRegion); + cl->copyDX = 0; + cl->copyDY = 0; + + if (cl->useNewFBSize) + cl->newFBSizePending = TRUE; + + TSIGNAL(cl->updateCond); + UNLOCK(cl->updateMutex); + } + rfbReleaseClientIterator(iterator); +} + +/* hang up on all clients and free all reserved memory */ + +void rfbScreenCleanup(rfbScreenInfoPtr screen) +{ + rfbClientIteratorPtr i=rfbGetClientIterator(screen); + rfbClientPtr cl,cl1=rfbClientIteratorNext(i); + while(cl1) { + cl=rfbClientIteratorNext(i); + rfbClientConnectionGone(cl1); + cl1=cl; + } + rfbReleaseClientIterator(i); + +#define FREE_IF(x) if(screen->x) free(screen->x) + FREE_IF(colourMap.data.bytes); + FREE_IF(underCursorBuffer); + TINI_MUTEX(screen->cursorMutex); + if(screen->cursor && screen->cursor->cleanup) + rfbFreeCursor(screen->cursor); + +#ifdef LIBVNCSERVER_HAVE_LIBZ + rfbZlibCleanup(screen); +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + rfbTightCleanup(screen); +#endif + + /* free all 'scaled' versions of this screen */ + while (screen->scaledScreenNext!=NULL) + { + rfbScreenInfoPtr ptr; + ptr = screen->scaledScreenNext; + screen->scaledScreenNext = ptr->scaledScreenNext; + free(ptr->frameBuffer); + free(ptr); + } + +#endif + free(screen); +} + +void rfbInitServer(rfbScreenInfoPtr screen) +{ +#ifdef WIN32 + WSADATA trash; + WSAStartup(MAKEWORD(2,2),&trash); +#endif + rfbInitSockets(screen); + rfbHttpInitSockets(screen); +#ifndef __MINGW32__ + if(screen->ignoreSIGPIPE) + signal(SIGPIPE,SIG_IGN); +#endif +} + +void rfbShutdownServer(rfbScreenInfoPtr screen,rfbBool disconnectClients) { + if(disconnectClients) { + rfbClientPtr cl; + rfbClientIteratorPtr iter = rfbGetClientIterator(screen); + while( (cl = rfbClientIteratorNext(iter)) ) + if (cl->sock > -1) + /* we don't care about maxfd here, because the server goes away */ + rfbCloseClient(cl); + rfbReleaseClientIterator(iter); + } + + rfbShutdownSockets(screen); + rfbHttpShutdownSockets(screen); +} + +#ifndef LIBVNCSERVER_HAVE_GETTIMEOFDAY +#include +#include +#include + +void gettimeofday(struct timeval* tv,char* dummy) +{ + SYSTEMTIME t; + GetSystemTime(&t); + tv->tv_sec=t.wHour*3600+t.wMinute*60+t.wSecond; + tv->tv_usec=t.wMilliseconds*1000; +} +#endif + +rfbBool +rfbProcessEvents(rfbScreenInfoPtr screen,long usec) +{ + rfbClientIteratorPtr i; + rfbClientPtr cl,clPrev; + rfbBool result=FALSE; + extern rfbClientIteratorPtr + rfbGetClientIteratorWithClosed(rfbScreenInfoPtr rfbScreen); + + if(usec<0) + usec=screen->deferUpdateTime*1000; + + rfbCheckFds(screen,usec); + rfbHttpCheckFds(screen); + + i = rfbGetClientIteratorWithClosed(screen); + cl=rfbClientIteratorHead(i); + while(cl) { + result = rfbUpdateClient(cl); + clPrev=cl; + cl=rfbClientIteratorNext(i); + if(clPrev->sock==-1) { + rfbClientConnectionGone(clPrev); + result=TRUE; + } + } + rfbReleaseClientIterator(i); + + return result; +} + +rfbBool +rfbUpdateClient(rfbClientPtr cl) +{ + struct timeval tv; + rfbBool result=FALSE; + rfbScreenInfoPtr screen = cl->screen; + + if (cl->sock >= 0 && !cl->onHold && FB_UPDATE_PENDING(cl) && + !sraRgnEmpty(cl->requestedRegion)) { + result=TRUE; + if(screen->deferUpdateTime == 0) { + rfbSendFramebufferUpdate(cl,cl->modifiedRegion); + } else if(cl->startDeferring.tv_usec == 0) { + gettimeofday(&cl->startDeferring,NULL); + if(cl->startDeferring.tv_usec == 0) + cl->startDeferring.tv_usec++; + } else { + gettimeofday(&tv,NULL); + if(tv.tv_sec < cl->startDeferring.tv_sec /* at midnight */ + || ((tv.tv_sec-cl->startDeferring.tv_sec)*1000 + +(tv.tv_usec-cl->startDeferring.tv_usec)/1000) + > screen->deferUpdateTime) { + cl->startDeferring.tv_usec = 0; + rfbSendFramebufferUpdate(cl,cl->modifiedRegion); + } + } + } + + if (!cl->viewOnly && cl->lastPtrX >= 0) { + if(cl->startPtrDeferring.tv_usec == 0) { + gettimeofday(&cl->startPtrDeferring,NULL); + if(cl->startPtrDeferring.tv_usec == 0) + cl->startPtrDeferring.tv_usec++; + } else { + struct timeval tv; + gettimeofday(&tv,NULL); + if(tv.tv_sec < cl->startPtrDeferring.tv_sec /* at midnight */ + || ((tv.tv_sec-cl->startPtrDeferring.tv_sec)*1000 + +(tv.tv_usec-cl->startPtrDeferring.tv_usec)/1000) + > cl->screen->deferPtrUpdateTime) { + cl->startPtrDeferring.tv_usec = 0; + cl->screen->ptrAddEvent(cl->lastPtrButtons, + cl->lastPtrX, + cl->lastPtrY, cl); + cl->lastPtrX = -1; + } + } + } + + return result; +} + +rfbBool rfbIsActive(rfbScreenInfoPtr screenInfo) { + return screenInfo->socketState!=RFB_SOCKET_SHUTDOWN || screenInfo->clientHead!=NULL; +} + +void rfbRunEventLoop(rfbScreenInfoPtr screen, long usec, rfbBool runInBackground) +{ + if(runInBackground) { +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD + pthread_t listener_thread; + + screen->backgroundLoop = TRUE; + + pthread_create(&listener_thread, NULL, listenerRun, screen); + return; +#else + rfbErr("Can't run in background, because I don't have PThreads!\n"); + return; +#endif + } + + if(usec<0) + usec=screen->deferUpdateTime*1000; + + while(rfbIsActive(screen)) + rfbProcessEvents(screen,usec); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/private.h b/jni/vnc/LibVNCServer-0.9.9/libvncserver/private.h new file mode 100644 index 0000000..d656e39 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/private.h @@ -0,0 +1,35 @@ +#ifndef RFB_PRIVATE_H +#define RFB_PRIVATE_H + +/* from cursor.c */ + +void rfbShowCursor(rfbClientPtr cl); +void rfbHideCursor(rfbClientPtr cl); +void rfbRedrawAfterHideCursor(rfbClientPtr cl,sraRegionPtr updateRegion); + +/* from main.c */ + +rfbClientPtr rfbClientIteratorHead(rfbClientIteratorPtr i); + +/* from tight.c */ + +#ifdef LIBVNCSERVER_HAVE_LIBZ +#ifdef LIBVNCSERVER_HAVE_LIBJPEG +extern void rfbTightCleanup(rfbScreenInfoPtr screen); +#endif + +/* from zlib.c */ +extern void rfbZlibCleanup(rfbScreenInfoPtr screen); + +/* from zrle.c */ +void rfbFreeZrleData(rfbClientPtr cl); + +#endif + + +/* from ultra.c */ + +extern void rfbFreeUltraData(rfbClientPtr cl); + +#endif + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto.h b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto.h new file mode 100644 index 0000000..9dc3e63 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto.h @@ -0,0 +1,12 @@ +#ifndef _RFB_CRYPTO_H +#define _RFB_CRYPTO_H 1 + +#include + +#define SHA1_HASH_SIZE 20 +#define MD5_HASH_SIZE 16 + +void digestmd5(const struct iovec *iov, int iovcnt, void *dest); +void digestsha1(const struct iovec *iov, int iovcnt, void *dest); + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto_gnutls.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto_gnutls.c new file mode 100644 index 0000000..2ecb2da --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto_gnutls.c @@ -0,0 +1,50 @@ +/* + * rfbcrypto_gnutls.c - Crypto wrapper (gnutls version) + */ + +/* + * Copyright (C) 2011 Gernot Tenchio + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include +#include "rfbcrypto.h" + +void digestmd5(const struct iovec *iov, int iovcnt, void *dest) +{ + gcry_md_hd_t c; + int i; + + gcry_md_open(&c, GCRY_MD_MD5, 0); + for (i = 0; i < iovcnt; i++) + gcry_md_write(c, iov[i].iov_base, iov[i].iov_len); + gcry_md_final(c); + memcpy(dest, gcry_md_read(c, 0), gcry_md_get_algo_dlen(GCRY_MD_MD5)); +} + +void digestsha1(const struct iovec *iov, int iovcnt, void *dest) +{ + gcry_md_hd_t c; + int i; + + gcry_md_open(&c, GCRY_MD_SHA1, 0); + for (i = 0; i < iovcnt; i++) + gcry_md_write(c, iov[i].iov_base, iov[i].iov_len); + gcry_md_final(c); + memcpy(dest, gcry_md_read(c, 0), gcry_md_get_algo_dlen(GCRY_MD_SHA1)); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto_included.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto_included.c new file mode 100644 index 0000000..58c2e93 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto_included.c @@ -0,0 +1,49 @@ +/* + * rfbcrypto_included.c - Crypto wrapper (included version) + */ + +/* + * Copyright (C) 2011 Gernot Tenchio + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include "md5.h" +#include "sha1.h" +#include "rfbcrypto.h" + +void digestmd5(const struct iovec *iov, int iovcnt, void *dest) +{ + struct md5_ctx c; + int i; + + __md5_init_ctx(&c); + for (i = 0; i < iovcnt; i++) + __md5_process_bytes(iov[i].iov_base, iov[i].iov_len, &c); + __md5_finish_ctx(&c, dest); +} + +void digestsha1(const struct iovec *iov, int iovcnt, void *dest) +{ + SHA1Context c; + int i; + + SHA1Reset(&c); + for (i = 0; i < iovcnt; i++) + SHA1Input(&c, iov[i].iov_base, iov[i].iov_len); + SHA1Result(&c, dest); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto_openssl.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto_openssl.c new file mode 100644 index 0000000..29ec5c1 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbcrypto_openssl.c @@ -0,0 +1,49 @@ +/* + * rfbcrypto_openssl.c - Crypto wrapper (openssl version) + */ + +/* + * Copyright (C) 2011 Gernot Tenchio + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include +#include +#include "rfbcrypto.h" + +void digestmd5(const struct iovec *iov, int iovcnt, void *dest) +{ + MD5_CTX c; + int i; + + MD5_Init(&c); + for (i = 0; i < iovcnt; i++) + MD5_Update(&c, iov[i].iov_base, iov[i].iov_len); + MD5_Final(dest, &c); +} + +void digestsha1(const struct iovec *iov, int iovcnt, void *dest) +{ + SHA_CTX c; + int i; + + SHA1_Init(&c); + for (i = 0; i < iovcnt; i++) + SHA1_Update(&c, iov[i].iov_base, iov[i].iov_len); + SHA1_Final(dest, &c); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbregion.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbregion.c new file mode 100644 index 0000000..0ab8a12 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbregion.c @@ -0,0 +1,886 @@ +/* -=- sraRegion.c + * Copyright (c) 2001 James "Wez" Weatherall, Johannes E. Schindelin + * + * A general purpose region clipping library + * Only deals with rectangular regions, though. + */ + +#include +#include + +/* -=- Internal Span structure */ + +struct sraRegion; + +typedef struct sraSpan { + struct sraSpan *_next; + struct sraSpan *_prev; + int start; + int end; + struct sraRegion *subspan; +} sraSpan; + +typedef struct sraRegion { + sraSpan front; + sraSpan back; +} sraSpanList; + +/* -=- Span routines */ + +sraSpanList *sraSpanListDup(const sraSpanList *src); +void sraSpanListDestroy(sraSpanList *list); + +static sraSpan * +sraSpanCreate(int start, int end, const sraSpanList *subspan) { + sraSpan *item = (sraSpan*)malloc(sizeof(sraSpan)); + item->_next = item->_prev = NULL; + item->start = start; + item->end = end; + item->subspan = sraSpanListDup(subspan); + return item; +} + +static sraSpan * +sraSpanDup(const sraSpan *src) { + sraSpan *span; + if (!src) return NULL; + span = sraSpanCreate(src->start, src->end, src->subspan); + return span; +} + +static void +sraSpanInsertAfter(sraSpan *newspan, sraSpan *after) { + newspan->_next = after->_next; + newspan->_prev = after; + after->_next->_prev = newspan; + after->_next = newspan; +} + +static void +sraSpanInsertBefore(sraSpan *newspan, sraSpan *before) { + newspan->_next = before; + newspan->_prev = before->_prev; + before->_prev->_next = newspan; + before->_prev = newspan; +} + +static void +sraSpanRemove(sraSpan *span) { + span->_prev->_next = span->_next; + span->_next->_prev = span->_prev; +} + +static void +sraSpanDestroy(sraSpan *span) { + if (span->subspan) sraSpanListDestroy(span->subspan); + free(span); +} + +#ifdef DEBUG +static void +sraSpanCheck(const sraSpan *span, const char *text) { + /* Check the span is valid! */ + if (span->start == span->end) { + printf(text); + printf(":%d-%d\n", span->start, span->end); + } +} +#endif + +/* -=- SpanList routines */ + +static void sraSpanPrint(const sraSpan *s); + +static void +sraSpanListPrint(const sraSpanList *l) { + sraSpan *curr; + if (!l) { + printf("NULL"); + return; + } + curr = l->front._next; + printf("["); + while (curr != &(l->back)) { + sraSpanPrint(curr); + curr = curr->_next; + } + printf("]"); +} + +void +sraSpanPrint(const sraSpan *s) { + printf("(%d-%d)", (s->start), (s->end)); + if (s->subspan) + sraSpanListPrint(s->subspan); +} + +static sraSpanList * +sraSpanListCreate(void) { + sraSpanList *item = (sraSpanList*)malloc(sizeof(sraSpanList)); + item->front._next = &(item->back); + item->front._prev = NULL; + item->back._prev = &(item->front); + item->back._next = NULL; + return item; +} + +sraSpanList * +sraSpanListDup(const sraSpanList *src) { + sraSpanList *newlist; + sraSpan *newspan, *curr; + + if (!src) return NULL; + newlist = sraSpanListCreate(); + curr = src->front._next; + while (curr != &(src->back)) { + newspan = sraSpanDup(curr); + sraSpanInsertBefore(newspan, &(newlist->back)); + curr = curr->_next; + } + + return newlist; +} + +void +sraSpanListDestroy(sraSpanList *list) { + sraSpan *curr, *next; + while (list->front._next != &(list->back)) { + curr = list->front._next; + next = curr->_next; + sraSpanRemove(curr); + sraSpanDestroy(curr); + curr = next; + } + free(list); +} + +static void +sraSpanListMakeEmpty(sraSpanList *list) { + sraSpan *curr, *next; + while (list->front._next != &(list->back)) { + curr = list->front._next; + next = curr->_next; + sraSpanRemove(curr); + sraSpanDestroy(curr); + curr = next; + } + list->front._next = &(list->back); + list->front._prev = NULL; + list->back._prev = &(list->front); + list->back._next = NULL; +} + +static rfbBool +sraSpanListEqual(const sraSpanList *s1, const sraSpanList *s2) { + sraSpan *sp1, *sp2; + + if (!s1) { + if (!s2) { + return 1; + } else { + rfbErr("sraSpanListEqual:incompatible spans (only one NULL!)\n"); + return FALSE; + } + } + + sp1 = s1->front._next; + sp2 = s2->front._next; + while ((sp1 != &(s1->back)) && + (sp2 != &(s2->back))) { + if ((sp1->start != sp2->start) || + (sp1->end != sp2->end) || + (!sraSpanListEqual(sp1->subspan, sp2->subspan))) { + return 0; + } + sp1 = sp1->_next; + sp2 = sp2->_next; + } + + if ((sp1 == &(s1->back)) && (sp2 == &(s2->back))) { + return 1; + } else { + return 0; + } +} + +static rfbBool +sraSpanListEmpty(const sraSpanList *list) { + return (list->front._next == &(list->back)); +} + +static unsigned long +sraSpanListCount(const sraSpanList *list) { + sraSpan *curr = list->front._next; + unsigned long count = 0; + while (curr != &(list->back)) { + if (curr->subspan) { + count += sraSpanListCount(curr->subspan); + } else { + count += 1; + } + curr = curr->_next; + } + return count; +} + +static void +sraSpanMergePrevious(sraSpan *dest) { + sraSpan *prev = dest->_prev; + + while ((prev->_prev) && + (prev->end == dest->start) && + (sraSpanListEqual(prev->subspan, dest->subspan))) { + /* + printf("merge_prev:"); + sraSpanPrint(prev); + printf(" & "); + sraSpanPrint(dest); + printf("\n"); + */ + dest->start = prev->start; + sraSpanRemove(prev); + sraSpanDestroy(prev); + prev = dest->_prev; + } +} + +static void +sraSpanMergeNext(sraSpan *dest) { + sraSpan *next = dest->_next; + while ((next->_next) && + (next->start == dest->end) && + (sraSpanListEqual(next->subspan, dest->subspan))) { +/* + printf("merge_next:"); + sraSpanPrint(dest); + printf(" & "); + sraSpanPrint(next); + printf("\n"); + */ + dest->end = next->end; + sraSpanRemove(next); + sraSpanDestroy(next); + next = dest->_next; + } +} + +static void +sraSpanListOr(sraSpanList *dest, const sraSpanList *src) { + sraSpan *d_curr, *s_curr; + int s_start, s_end; + + if (!dest) { + if (!src) { + return; + } else { + rfbErr("sraSpanListOr:incompatible spans (only one NULL!)\n"); + return; + } + } + + d_curr = dest->front._next; + s_curr = src->front._next; + s_start = s_curr->start; + s_end = s_curr->end; + while (s_curr != &(src->back)) { + + /* - If we are at end of destination list OR + If the new span comes before the next destination one */ + if ((d_curr == &(dest->back)) || + (d_curr->start >= s_end)) { + /* - Add the span */ + sraSpanInsertBefore(sraSpanCreate(s_start, s_end, + s_curr->subspan), + d_curr); + if (d_curr != &(dest->back)) + sraSpanMergePrevious(d_curr); + s_curr = s_curr->_next; + s_start = s_curr->start; + s_end = s_curr->end; + } else { + + /* - If the new span overlaps the existing one */ + if ((s_start < d_curr->end) && + (s_end > d_curr->start)) { + + /* - Insert new span before the existing destination one? */ + if (s_start < d_curr->start) { + sraSpanInsertBefore(sraSpanCreate(s_start, + d_curr->start, + s_curr->subspan), + d_curr); + sraSpanMergePrevious(d_curr); + } + + /* Split the existing span if necessary */ + if (s_end < d_curr->end) { + sraSpanInsertAfter(sraSpanCreate(s_end, + d_curr->end, + d_curr->subspan), + d_curr); + d_curr->end = s_end; + } + if (s_start > d_curr->start) { + sraSpanInsertBefore(sraSpanCreate(d_curr->start, + s_start, + d_curr->subspan), + d_curr); + d_curr->start = s_start; + } + + /* Recursively OR subspans */ + sraSpanListOr(d_curr->subspan, s_curr->subspan); + + /* Merge this span with previous or next? */ + if (d_curr->_prev != &(dest->front)) + sraSpanMergePrevious(d_curr); + if (d_curr->_next != &(dest->back)) + sraSpanMergeNext(d_curr); + + /* Move onto the next pair to compare */ + if (s_end > d_curr->end) { + s_start = d_curr->end; + d_curr = d_curr->_next; + } else { + s_curr = s_curr->_next; + s_start = s_curr->start; + s_end = s_curr->end; + } + } else { + /* - No overlap. Move to the next destination span */ + d_curr = d_curr->_next; + } + } + } +} + +static rfbBool +sraSpanListAnd(sraSpanList *dest, const sraSpanList *src) { + sraSpan *d_curr, *s_curr, *d_next; + + if (!dest) { + if (!src) { + return 1; + } else { + rfbErr("sraSpanListAnd:incompatible spans (only one NULL!)\n"); + return FALSE; + } + } + + d_curr = dest->front._next; + s_curr = src->front._next; + while ((s_curr != &(src->back)) && (d_curr != &(dest->back))) { + + /* - If we haven't reached a destination span yet then move on */ + if (d_curr->start >= s_curr->end) { + s_curr = s_curr->_next; + continue; + } + + /* - If we are beyond the current destination span then remove it */ + if (d_curr->end <= s_curr->start) { + sraSpan *next = d_curr->_next; + sraSpanRemove(d_curr); + sraSpanDestroy(d_curr); + d_curr = next; + continue; + } + + /* - If we partially overlap a span then split it up or remove bits */ + if (s_curr->start > d_curr->start) { + /* - The top bit of the span does not match */ + d_curr->start = s_curr->start; + } + if (s_curr->end < d_curr->end) { + /* - The end of the span does not match */ + sraSpanInsertAfter(sraSpanCreate(s_curr->end, + d_curr->end, + d_curr->subspan), + d_curr); + d_curr->end = s_curr->end; + } + + /* - Now recursively process the affected span */ + if (!sraSpanListAnd(d_curr->subspan, s_curr->subspan)) { + /* - The destination subspan is now empty, so we should remove it */ + sraSpan *next = d_curr->_next; + sraSpanRemove(d_curr); + sraSpanDestroy(d_curr); + d_curr = next; + } else { + /* Merge this span with previous or next? */ + if (d_curr->_prev != &(dest->front)) + sraSpanMergePrevious(d_curr); + + /* - Move on to the next span */ + d_next = d_curr; + if (s_curr->end >= d_curr->end) { + d_next = d_curr->_next; + } + if (s_curr->end <= d_curr->end) { + s_curr = s_curr->_next; + } + d_curr = d_next; + } + } + + while (d_curr != &(dest->back)) { + sraSpan *next = d_curr->_next; + sraSpanRemove(d_curr); + sraSpanDestroy(d_curr); + d_curr=next; + } + + return !sraSpanListEmpty(dest); +} + +static rfbBool +sraSpanListSubtract(sraSpanList *dest, const sraSpanList *src) { + sraSpan *d_curr, *s_curr; + + if (!dest) { + if (!src) { + return 1; + } else { + rfbErr("sraSpanListSubtract:incompatible spans (only one NULL!)\n"); + return FALSE; + } + } + + d_curr = dest->front._next; + s_curr = src->front._next; + while ((s_curr != &(src->back)) && (d_curr != &(dest->back))) { + + /* - If we haven't reached a destination span yet then move on */ + if (d_curr->start >= s_curr->end) { + s_curr = s_curr->_next; + continue; + } + + /* - If we are beyond the current destination span then skip it */ + if (d_curr->end <= s_curr->start) { + d_curr = d_curr->_next; + continue; + } + + /* - If we partially overlap the current span then split it up */ + if (s_curr->start > d_curr->start) { + sraSpanInsertBefore(sraSpanCreate(d_curr->start, + s_curr->start, + d_curr->subspan), + d_curr); + d_curr->start = s_curr->start; + } + if (s_curr->end < d_curr->end) { + sraSpanInsertAfter(sraSpanCreate(s_curr->end, + d_curr->end, + d_curr->subspan), + d_curr); + d_curr->end = s_curr->end; + } + + /* - Now recursively process the affected span */ + if ((!d_curr->subspan) || !sraSpanListSubtract(d_curr->subspan, s_curr->subspan)) { + /* - The destination subspan is now empty, so we should remove it */ + sraSpan *next = d_curr->_next; + sraSpanRemove(d_curr); + sraSpanDestroy(d_curr); + d_curr = next; + } else { + /* Merge this span with previous or next? */ + if (d_curr->_prev != &(dest->front)) + sraSpanMergePrevious(d_curr); + if (d_curr->_next != &(dest->back)) + sraSpanMergeNext(d_curr); + + /* - Move on to the next span */ + if (s_curr->end > d_curr->end) { + d_curr = d_curr->_next; + } else { + s_curr = s_curr->_next; + } + } + } + + return !sraSpanListEmpty(dest); +} + +/* -=- Region routines */ + +sraRegion * +sraRgnCreate(void) { + return (sraRegion*)sraSpanListCreate(); +} + +sraRegion * +sraRgnCreateRect(int x1, int y1, int x2, int y2) { + sraSpanList *vlist, *hlist; + sraSpan *vspan, *hspan; + + /* - Build the horizontal portion of the span */ + hlist = sraSpanListCreate(); + hspan = sraSpanCreate(x1, x2, NULL); + sraSpanInsertAfter(hspan, &(hlist->front)); + + /* - Build the vertical portion of the span */ + vlist = sraSpanListCreate(); + vspan = sraSpanCreate(y1, y2, hlist); + sraSpanInsertAfter(vspan, &(vlist->front)); + + sraSpanListDestroy(hlist); + + return (sraRegion*)vlist; +} + +sraRegion * +sraRgnCreateRgn(const sraRegion *src) { + return (sraRegion*)sraSpanListDup((sraSpanList*)src); +} + +void +sraRgnDestroy(sraRegion *rgn) { + sraSpanListDestroy((sraSpanList*)rgn); +} + +void +sraRgnMakeEmpty(sraRegion *rgn) { + sraSpanListMakeEmpty((sraSpanList*)rgn); +} + +/* -=- Boolean Region ops */ + +rfbBool +sraRgnAnd(sraRegion *dst, const sraRegion *src) { + return sraSpanListAnd((sraSpanList*)dst, (sraSpanList*)src); +} + +void +sraRgnOr(sraRegion *dst, const sraRegion *src) { + sraSpanListOr((sraSpanList*)dst, (sraSpanList*)src); +} + +rfbBool +sraRgnSubtract(sraRegion *dst, const sraRegion *src) { + return sraSpanListSubtract((sraSpanList*)dst, (sraSpanList*)src); +} + +void +sraRgnOffset(sraRegion *dst, int dx, int dy) { + sraSpan *vcurr, *hcurr; + + vcurr = ((sraSpanList*)dst)->front._next; + while (vcurr != &(((sraSpanList*)dst)->back)) { + vcurr->start += dy; + vcurr->end += dy; + + hcurr = vcurr->subspan->front._next; + while (hcurr != &(vcurr->subspan->back)) { + hcurr->start += dx; + hcurr->end += dx; + hcurr = hcurr->_next; + } + + vcurr = vcurr->_next; + } +} + +sraRegion *sraRgnBBox(const sraRegion *src) { + int xmin=((unsigned int)(int)-1)>>1,ymin=xmin,xmax=1-xmin,ymax=xmax; + sraSpan *vcurr, *hcurr; + + if(!src) + return sraRgnCreate(); + + vcurr = ((sraSpanList*)src)->front._next; + while (vcurr != &(((sraSpanList*)src)->back)) { + if(vcurr->startstart; + if(vcurr->end>ymax) + ymax=vcurr->end; + + hcurr = vcurr->subspan->front._next; + while (hcurr != &(vcurr->subspan->back)) { + if(hcurr->startstart; + if(hcurr->end>xmax) + xmax=hcurr->end; + hcurr = hcurr->_next; + } + + vcurr = vcurr->_next; + } + + if(xmaxback._prev; + vend = &(((sraSpanList*)rgn)->front); + } else { + vcurr = ((sraSpanList*)rgn)->front._next; + vend = &(((sraSpanList*)rgn)->back); + } + + if (vcurr != vend) { + rect->y1 = vcurr->start; + rect->y2 = vcurr->end; + + /* - Pick correct order */ + if (right2left) { + hcurr = vcurr->subspan->back._prev; + hend = &(vcurr->subspan->front); + } else { + hcurr = vcurr->subspan->front._next; + hend = &(vcurr->subspan->back); + } + + if (hcurr != hend) { + rect->x1 = hcurr->start; + rect->x2 = hcurr->end; + + sraSpanRemove(hcurr); + sraSpanDestroy(hcurr); + + if (sraSpanListEmpty(vcurr->subspan)) { + sraSpanRemove(vcurr); + sraSpanDestroy(vcurr); + } + +#if 0 + printf("poprect:(%dx%d)-(%dx%d)\n", + rect->x1, rect->y1, rect->x2, rect->y2); +#endif + return 1; + } + } + + return 0; +} + +unsigned long +sraRgnCountRects(const sraRegion *rgn) { + unsigned long count = sraSpanListCount((sraSpanList*)rgn); + return count; +} + +rfbBool +sraRgnEmpty(const sraRegion *rgn) { + return sraSpanListEmpty((sraSpanList*)rgn); +} + +/* iterator stuff */ +sraRectangleIterator *sraRgnGetIterator(sraRegion *s) +{ + /* these values have to be multiples of 4 */ +#define DEFSIZE 4 +#define DEFSTEP 8 + sraRectangleIterator *i = + (sraRectangleIterator*)malloc(sizeof(sraRectangleIterator)); + if(!i) + return NULL; + + /* we have to recurse eventually. So, the first sPtr is the pointer to + the sraSpan in the first level. the second sPtr is the pointer to + the sraRegion.back. The third and fourth sPtr are for the second + recursion level and so on. */ + i->sPtrs = (sraSpan**)malloc(sizeof(sraSpan*)*DEFSIZE); + if(!i->sPtrs) { + free(i); + return NULL; + } + i->ptrSize = DEFSIZE; + i->sPtrs[0] = &(s->front); + i->sPtrs[1] = &(s->back); + i->ptrPos = 0; + i->reverseX = 0; + i->reverseY = 0; + return i; +} + +sraRectangleIterator *sraRgnGetReverseIterator(sraRegion *s,rfbBool reverseX,rfbBool reverseY) +{ + sraRectangleIterator *i = sraRgnGetIterator(s); + if(reverseY) { + i->sPtrs[1] = &(s->front); + i->sPtrs[0] = &(s->back); + } + i->reverseX = reverseX; + i->reverseY = reverseY; + return(i); +} + +static rfbBool sraReverse(sraRectangleIterator *i) +{ + return( ((i->ptrPos&2) && i->reverseX) || + (!(i->ptrPos&2) && i->reverseY)); +} + +static sraSpan* sraNextSpan(sraRectangleIterator *i) +{ + if(sraReverse(i)) + return(i->sPtrs[i->ptrPos]->_prev); + else + return(i->sPtrs[i->ptrPos]->_next); +} + +rfbBool sraRgnIteratorNext(sraRectangleIterator* i,sraRect* r) +{ + /* is the subspan finished? */ + while(sraNextSpan(i) == i->sPtrs[i->ptrPos+1]) { + i->ptrPos -= 2; + if(i->ptrPos < 0) /* the end */ + return(0); + } + + i->sPtrs[i->ptrPos] = sraNextSpan(i); + + /* is this a new subspan? */ + while(i->sPtrs[i->ptrPos]->subspan) { + if(i->ptrPos+2 > i->ptrSize) { /* array is too small */ + i->ptrSize += DEFSTEP; + i->sPtrs = (sraSpan**)realloc(i->sPtrs, sizeof(sraSpan*)*i->ptrSize); + } + i->ptrPos =+ 2; + if(sraReverse(i)) { + i->sPtrs[i->ptrPos] = i->sPtrs[i->ptrPos-2]->subspan->back._prev; + i->sPtrs[i->ptrPos+1] = &(i->sPtrs[i->ptrPos-2]->subspan->front); + } else { + i->sPtrs[i->ptrPos] = i->sPtrs[i->ptrPos-2]->subspan->front._next; + i->sPtrs[i->ptrPos+1] = &(i->sPtrs[i->ptrPos-2]->subspan->back); + } + } + + if((i->ptrPos%4)!=2) { + rfbErr("sraRgnIteratorNext: offset is wrong (%d%%4!=2)\n",i->ptrPos); + return FALSE; + } + + r->y1 = i->sPtrs[i->ptrPos-2]->start; + r->y2 = i->sPtrs[i->ptrPos-2]->end; + r->x1 = i->sPtrs[i->ptrPos]->start; + r->x2 = i->sPtrs[i->ptrPos]->end; + + return(-1); +} + +void sraRgnReleaseIterator(sraRectangleIterator* i) +{ + free(i->sPtrs); + free(i); +} + +void +sraRgnPrint(const sraRegion *rgn) { + sraSpanListPrint((sraSpanList*)rgn); +} + +rfbBool +sraClipRect(int *x, int *y, int *w, int *h, + int cx, int cy, int cw, int ch) { + if (*x < cx) { + *w -= (cx-*x); + *x = cx; + } + if (*y < cy) { + *h -= (cy-*y); + *y = cy; + } + if (*x+*w > cx+cw) { + *w = (cx+cw)-*x; + } + if (*y+*h > cy+ch) { + *h = (cy+ch)-*y; + } + return (*w>0) && (*h>0); +} + +rfbBool +sraClipRect2(int *x, int *y, int *x2, int *y2, + int cx, int cy, int cx2, int cy2) { + if (*x < cx) + *x = cx; + if (*y < cy) + *y = cy; + if (*x >= cx2) + *x = cx2-1; + if (*y >= cy2) + *y = cy2-1; + if (*x2 <= cx) + *x2 = cx+1; + if (*y2 <= cy) + *y2 = cy+1; + if (*x2 > cx2) + *x2 = cx2; + if (*y2 > cy2) + *y2 = cy2; + return (*x2>*x) && (*y2>*y); +} + +/* test */ + +#ifdef SRA_TEST +/* pipe the output to sort|uniq -u and you'll get the errors. */ +int main(int argc, char** argv) +{ + sraRegionPtr region, region1, region2; + sraRectangleIterator* i; + sraRect rect; + rfbBool b; + + region = sraRgnCreateRect(10, 10, 600, 300); + region1 = sraRgnCreateRect(40, 50, 350, 200); + region2 = sraRgnCreateRect(0, 0, 20, 40); + + sraRgnPrint(region); + printf("\n[(10-300)[(10-600)]]\n\n"); + + b = sraRgnSubtract(region, region1); + printf("%s ",b?"true":"false"); + sraRgnPrint(region); + printf("\ntrue [(10-50)[(10-600)](50-200)[(10-40)(350-600)](200-300)[(10-600)]]\n\n"); + + sraRgnOr(region, region2); + printf("%ld\n6\n\n", sraRgnCountRects(region)); + + i = sraRgnGetIterator(region); + while(sraRgnIteratorNext(i, &rect)) + printf("%dx%d+%d+%d ", + rect.x2-rect.x1,rect.y2-rect.y1, + rect.x1,rect.y1); + sraRgnReleaseIterator(i); + printf("\n20x10+0+0 600x30+0+10 590x10+10+40 30x150+10+50 250x150+350+50 590x100+10+200 \n\n"); + + i = sraRgnGetReverseIterator(region,1,0); + while(sraRgnIteratorNext(i, &rect)) + printf("%dx%d+%d+%d ", + rect.x2-rect.x1,rect.y2-rect.y1, + rect.x1,rect.y1); + sraRgnReleaseIterator(i); + printf("\n20x10+0+0 600x30+0+10 590x10+10+40 250x150+350+50 30x150+10+50 590x100+10+200 \n\n"); + + i = sraRgnGetReverseIterator(region,1,1); + while(sraRgnIteratorNext(i, &rect)) + printf("%dx%d+%d+%d ", + rect.x2-rect.x1,rect.y2-rect.y1, + rect.x1,rect.y1); + sraRgnReleaseIterator(i); + printf("\n590x100+10+200 250x150+350+50 30x150+10+50 590x10+10+40 600x30+0+10 20x10+0+0 \n\n"); + + sraRgnDestroy(region); + sraRgnDestroy(region1); + sraRgnDestroy(region2); + + return(0); +} +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbserver.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbserver.c new file mode 100644 index 0000000..cc398f2 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbserver.c @@ -0,0 +1,3453 @@ +/* + * rfbserver.c - deal with server-side of the RFB protocol. + */ + +/* + * Copyright (C) 2011-2012 D. R. Commander + * Copyright (C) 2005 Rohit Kumar, Johannes E. Schindelin + * Copyright (C) 2002 RealVNC Ltd. + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#ifdef __STRICT_ANSI__ +#define _BSD_SOURCE +#endif +#include +#include +#include +#include "private.h" + +#ifdef LIBVNCSERVER_HAVE_FCNTL_H +#include +#endif + +#ifdef WIN32 +#define write(sock,buf,len) send(sock,buf,len,0) +#else +#ifdef LIBVNCSERVER_HAVE_UNISTD_H +#include +#endif +#include +#ifdef LIBVNCSERVER_HAVE_SYS_SOCKET_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_NETINET_IN_H +#include +#include +#include +#include +#endif +#endif + +#ifdef DEBUGPROTO +#undef DEBUGPROTO +#define DEBUGPROTO(x) x +#else +#define DEBUGPROTO(x) +#endif +#include +#include +/* stst() */ +#include +#include +#include +/* readdir() */ +#include +/* errno */ +#include +/* strftime() */ +#include + +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS +#include "rfbssl.h" +#endif + +#ifdef __MINGW32__ +static int compat_mkdir(const char *path, int mode) +{ + return mkdir(path); +} +#define mkdir compat_mkdir +#endif + +#ifdef LIBVNCSERVER_HAVE_LIBJPEG +/* + * Map of quality levels to provide compatibility with TightVNC/TigerVNC + * clients. This emulates the behavior of the TigerVNC Server. + */ + +static const int tight2turbo_qual[10] = { + 15, 29, 41, 42, 62, 77, 79, 86, 92, 100 +}; + +static const int tight2turbo_subsamp[10] = { + 1, 1, 1, 2, 2, 2, 0, 0, 0, 0 +}; +#endif + +static void rfbProcessClientProtocolVersion(rfbClientPtr cl); +static void rfbProcessClientNormalMessage(rfbClientPtr cl); +static void rfbProcessClientInitMessage(rfbClientPtr cl); + +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD +void rfbIncrClientRef(rfbClientPtr cl) +{ + LOCK(cl->refCountMutex); + cl->refCount++; + UNLOCK(cl->refCountMutex); +} + +void rfbDecrClientRef(rfbClientPtr cl) +{ + LOCK(cl->refCountMutex); + cl->refCount--; + if(cl->refCount<=0) /* just to be sure also < 0 */ + TSIGNAL(cl->deleteCond); + UNLOCK(cl->refCountMutex); +} +#else +void rfbIncrClientRef(rfbClientPtr cl) {} +void rfbDecrClientRef(rfbClientPtr cl) {} +#endif + +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD +static MUTEX(rfbClientListMutex); +#endif + +struct rfbClientIterator { + rfbClientPtr next; + rfbScreenInfoPtr screen; + rfbBool closedToo; +}; + +void +rfbClientListInit(rfbScreenInfoPtr rfbScreen) +{ + if(sizeof(rfbBool)!=1) { + /* a sanity check */ + fprintf(stderr,"rfbBool's size is not 1 (%d)!\n",(int)sizeof(rfbBool)); + /* we cannot continue, because rfbBool is supposed to be char everywhere */ + exit(1); + } + rfbScreen->clientHead = NULL; + INIT_MUTEX(rfbClientListMutex); +} + +rfbClientIteratorPtr +rfbGetClientIterator(rfbScreenInfoPtr rfbScreen) +{ + rfbClientIteratorPtr i = + (rfbClientIteratorPtr)malloc(sizeof(struct rfbClientIterator)); + i->next = NULL; + i->screen = rfbScreen; + i->closedToo = FALSE; + return i; +} + +rfbClientIteratorPtr +rfbGetClientIteratorWithClosed(rfbScreenInfoPtr rfbScreen) +{ + rfbClientIteratorPtr i = + (rfbClientIteratorPtr)malloc(sizeof(struct rfbClientIterator)); + i->next = NULL; + i->screen = rfbScreen; + i->closedToo = TRUE; + return i; +} + +rfbClientPtr +rfbClientIteratorHead(rfbClientIteratorPtr i) +{ +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD + if(i->next != 0) { + rfbDecrClientRef(i->next); + rfbIncrClientRef(i->screen->clientHead); + } +#endif + LOCK(rfbClientListMutex); + i->next = i->screen->clientHead; + UNLOCK(rfbClientListMutex); + return i->next; +} + +rfbClientPtr +rfbClientIteratorNext(rfbClientIteratorPtr i) +{ + if(i->next == 0) { + LOCK(rfbClientListMutex); + i->next = i->screen->clientHead; + UNLOCK(rfbClientListMutex); + } else { + IF_PTHREADS(rfbClientPtr cl = i->next); + i->next = i->next->next; + IF_PTHREADS(rfbDecrClientRef(cl)); + } + +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD + if(!i->closedToo) + while(i->next && i->next->sock<0) + i->next = i->next->next; + if(i->next) + rfbIncrClientRef(i->next); +#endif + + return i->next; +} + +void +rfbReleaseClientIterator(rfbClientIteratorPtr iterator) +{ + IF_PTHREADS(if(iterator->next) rfbDecrClientRef(iterator->next)); + free(iterator); +} + + +/* + * rfbNewClientConnection is called from sockets.c when a new connection + * comes in. + */ + +void +rfbNewClientConnection(rfbScreenInfoPtr rfbScreen, + int sock) +{ + rfbNewClient(rfbScreen,sock); +} + + +/* + * rfbReverseConnection is called to make an outward + * connection to a "listening" RFB client. + */ + +rfbClientPtr +rfbReverseConnection(rfbScreenInfoPtr rfbScreen, + char *host, + int port) +{ + int sock; + rfbClientPtr cl; + + if ((sock = rfbConnect(rfbScreen, host, port)) < 0) + return (rfbClientPtr)NULL; + + cl = rfbNewClient(rfbScreen, sock); + + if (cl) { + cl->reverseConnection = TRUE; + } + + return cl; +} + + +void +rfbSetProtocolVersion(rfbScreenInfoPtr rfbScreen, int major_, int minor_) +{ + /* Permit the server to set the version to report */ + /* TODO: sanity checking */ + if ((major_==3) && (minor_ > 2 && minor_ < 9)) + { + rfbScreen->protocolMajorVersion = major_; + rfbScreen->protocolMinorVersion = minor_; + } + else + rfbLog("rfbSetProtocolVersion(%d,%d) set to invalid values\n", major_, minor_); +} + +/* + * rfbNewClient is called when a new connection has been made by whatever + * means. + */ + +static rfbClientPtr +rfbNewTCPOrUDPClient(rfbScreenInfoPtr rfbScreen, + int sock, + rfbBool isUDP) +{ + rfbProtocolVersionMsg pv; + rfbClientIteratorPtr iterator; + rfbClientPtr cl,cl_; +#ifdef LIBVNCSERVER_IPv6 + struct sockaddr_storage addr; +#else + struct sockaddr_in addr; +#endif + socklen_t addrlen = sizeof(addr); + rfbProtocolExtension* extension; + + cl = (rfbClientPtr)calloc(sizeof(rfbClientRec),1); + + cl->screen = rfbScreen; + cl->sock = sock; + cl->viewOnly = FALSE; + /* setup pseudo scaling */ + cl->scaledScreen = rfbScreen; + cl->scaledScreen->scaledScreenRefCount++; + + rfbResetStats(cl); + + cl->clientData = NULL; + cl->clientGoneHook = rfbDoNothingWithClient; + + if(isUDP) { + rfbLog(" accepted UDP client\n"); + } else { + int one=1; + + getpeername(sock, (struct sockaddr *)&addr, &addrlen); +#ifdef LIBVNCSERVER_IPv6 + char host[1024]; + if(getnameinfo((struct sockaddr*)&addr, addrlen, host, sizeof(host), NULL, 0, NI_NUMERICHOST) != 0) { + rfbLogPerror("rfbNewClient: error in getnameinfo"); + cl->host = strdup(""); + } + else + cl->host = strdup(host); +#else + cl->host = strdup(inet_ntoa(addr.sin_addr)); +#endif + + rfbLog(" other clients:\n"); + iterator = rfbGetClientIterator(rfbScreen); + while ((cl_ = rfbClientIteratorNext(iterator)) != NULL) { + rfbLog(" %s\n",cl_->host); + } + rfbReleaseClientIterator(iterator); + + if(!rfbSetNonBlocking(sock)) { + close(sock); + return NULL; + } + + if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, + (char *)&one, sizeof(one)) < 0) { + rfbLogPerror("setsockopt failed"); + close(sock); + return NULL; + } + + FD_SET(sock,&(rfbScreen->allFds)); + rfbScreen->maxFd = max(sock,rfbScreen->maxFd); + + INIT_MUTEX(cl->outputMutex); + INIT_MUTEX(cl->refCountMutex); + INIT_MUTEX(cl->sendMutex); + INIT_COND(cl->deleteCond); + + cl->state = RFB_PROTOCOL_VERSION; + + cl->reverseConnection = FALSE; + cl->readyForSetColourMapEntries = FALSE; + cl->useCopyRect = FALSE; + cl->preferredEncoding = -1; + cl->correMaxWidth = 48; + cl->correMaxHeight = 48; +#ifdef LIBVNCSERVER_HAVE_LIBZ + cl->zrleData = NULL; +#endif + + cl->copyRegion = sraRgnCreate(); + cl->copyDX = 0; + cl->copyDY = 0; + + cl->modifiedRegion = + sraRgnCreateRect(0,0,rfbScreen->width,rfbScreen->height); + + INIT_MUTEX(cl->updateMutex); + INIT_COND(cl->updateCond); + + cl->requestedRegion = sraRgnCreate(); + + cl->format = cl->screen->serverFormat; + cl->translateFn = rfbTranslateNone; + cl->translateLookupTable = NULL; + + LOCK(rfbClientListMutex); + + IF_PTHREADS(cl->refCount = 0); + cl->next = rfbScreen->clientHead; + cl->prev = NULL; + if (rfbScreen->clientHead) + rfbScreen->clientHead->prev = cl; + + rfbScreen->clientHead = cl; + UNLOCK(rfbClientListMutex); + +#if defined(LIBVNCSERVER_HAVE_LIBZ) || defined(LIBVNCSERVER_HAVE_LIBPNG) + cl->tightQualityLevel = -1; +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + cl->tightCompressLevel = TIGHT_DEFAULT_COMPRESSION; + cl->turboSubsampLevel = TURBO_DEFAULT_SUBSAMP; + { + int i; + for (i = 0; i < 4; i++) + cl->zsActive[i] = FALSE; + } +#endif +#endif + + cl->fileTransfer.fd = -1; + + cl->enableCursorShapeUpdates = FALSE; + cl->enableCursorPosUpdates = FALSE; + cl->useRichCursorEncoding = FALSE; + cl->enableLastRectEncoding = FALSE; + cl->enableKeyboardLedState = FALSE; + cl->enableSupportedMessages = FALSE; + cl->enableSupportedEncodings = FALSE; + cl->enableServerIdentity = FALSE; + cl->lastKeyboardLedState = -1; + cl->cursorX = rfbScreen->cursorX; + cl->cursorY = rfbScreen->cursorY; + cl->useNewFBSize = FALSE; + +#ifdef LIBVNCSERVER_HAVE_LIBZ + cl->compStreamInited = FALSE; + cl->compStream.total_in = 0; + cl->compStream.total_out = 0; + cl->compStream.zalloc = Z_NULL; + cl->compStream.zfree = Z_NULL; + cl->compStream.opaque = Z_NULL; + + cl->zlibCompressLevel = 5; +#endif + + cl->progressiveSliceY = 0; + + cl->extensions = NULL; + + cl->lastPtrX = -1; + +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS + /* + * Wait a few ms for the client to send one of: + * - Flash policy request + * - WebSockets connection (TLS/SSL or plain) + */ + if (!webSocketsCheck(cl)) { + /* Error reporting handled in webSocketsHandshake */ + rfbCloseClient(cl); + rfbClientConnectionGone(cl); + return NULL; + } +#endif + + sprintf(pv,rfbProtocolVersionFormat,rfbScreen->protocolMajorVersion, + rfbScreen->protocolMinorVersion); + + if (rfbWriteExact(cl, pv, sz_rfbProtocolVersionMsg) < 0) { + rfbLogPerror("rfbNewClient: write"); + rfbCloseClient(cl); + rfbClientConnectionGone(cl); + return NULL; + } + } + + for(extension = rfbGetExtensionIterator(); extension; + extension=extension->next) { + void* data = NULL; + /* if the extension does not have a newClient method, it wants + * to be initialized later. */ + if(extension->newClient && extension->newClient(cl, &data)) + rfbEnableExtension(cl, extension, data); + } + rfbReleaseExtensionIterator(); + + switch (cl->screen->newClientHook(cl)) { + case RFB_CLIENT_ON_HOLD: + cl->onHold = TRUE; + break; + case RFB_CLIENT_ACCEPT: + cl->onHold = FALSE; + break; + case RFB_CLIENT_REFUSE: + rfbCloseClient(cl); + rfbClientConnectionGone(cl); + cl = NULL; + break; + } + return cl; +} + +rfbClientPtr +rfbNewClient(rfbScreenInfoPtr rfbScreen, + int sock) +{ + return(rfbNewTCPOrUDPClient(rfbScreen,sock,FALSE)); +} + +rfbClientPtr +rfbNewUDPClient(rfbScreenInfoPtr rfbScreen) +{ + return((rfbScreen->udpClient= + rfbNewTCPOrUDPClient(rfbScreen,rfbScreen->udpSock,TRUE))); +} + +/* + * rfbClientConnectionGone is called from sockets.c just after a connection + * has gone away. + */ + +void +rfbClientConnectionGone(rfbClientPtr cl) +{ +#if defined(LIBVNCSERVER_HAVE_LIBZ) && defined(LIBVNCSERVER_HAVE_LIBJPEG) + int i; +#endif + + LOCK(rfbClientListMutex); + + if (cl->prev) + cl->prev->next = cl->next; + else + cl->screen->clientHead = cl->next; + if (cl->next) + cl->next->prev = cl->prev; + + UNLOCK(rfbClientListMutex); + +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD + if(cl->screen->backgroundLoop != FALSE) { + int i; + do { + LOCK(cl->refCountMutex); + i=cl->refCount; + if(i>0) + WAIT(cl->deleteCond,cl->refCountMutex); + UNLOCK(cl->refCountMutex); + } while(i>0); + } +#endif + + if(cl->sock>=0) + close(cl->sock); + + if (cl->scaledScreen!=NULL) + cl->scaledScreen->scaledScreenRefCount--; + +#ifdef LIBVNCSERVER_HAVE_LIBZ + rfbFreeZrleData(cl); +#endif + + rfbFreeUltraData(cl); + + /* free buffers holding pixel data before and after encoding */ + free(cl->beforeEncBuf); + free(cl->afterEncBuf); + + if(cl->sock>=0) + FD_CLR(cl->sock,&(cl->screen->allFds)); + + cl->clientGoneHook(cl); + + rfbLog("Client %s gone\n",cl->host); + free(cl->host); + +#ifdef LIBVNCSERVER_HAVE_LIBZ + /* Release the compression state structures if any. */ + if ( cl->compStreamInited ) { + deflateEnd( &(cl->compStream) ); + } + +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + for (i = 0; i < 4; i++) { + if (cl->zsActive[i]) + deflateEnd(&cl->zsStruct[i]); + } +#endif +#endif + + if (cl->screen->pointerClient == cl) + cl->screen->pointerClient = NULL; + + sraRgnDestroy(cl->modifiedRegion); + sraRgnDestroy(cl->requestedRegion); + sraRgnDestroy(cl->copyRegion); + + if (cl->translateLookupTable) free(cl->translateLookupTable); + + TINI_COND(cl->updateCond); + TINI_MUTEX(cl->updateMutex); + + /* make sure outputMutex is unlocked before destroying */ + LOCK(cl->outputMutex); + UNLOCK(cl->outputMutex); + TINI_MUTEX(cl->outputMutex); + + LOCK(cl->sendMutex); + UNLOCK(cl->sendMutex); + TINI_MUTEX(cl->sendMutex); + + rfbPrintStats(cl); + rfbResetStats(cl); + + free(cl); +} + + +/* + * rfbProcessClientMessage is called when there is data to read from a client. + */ + +void +rfbProcessClientMessage(rfbClientPtr cl) +{ + switch (cl->state) { + case RFB_PROTOCOL_VERSION: + rfbProcessClientProtocolVersion(cl); + return; + case RFB_SECURITY_TYPE: + rfbProcessClientSecurityType(cl); + return; + case RFB_AUTHENTICATION: + rfbAuthProcessClientMessage(cl); + return; + case RFB_INITIALISATION: + case RFB_INITIALISATION_SHARED: + rfbProcessClientInitMessage(cl); + return; + default: + rfbProcessClientNormalMessage(cl); + return; + } +} + + +/* + * rfbProcessClientProtocolVersion is called when the client sends its + * protocol version. + */ + +static void +rfbProcessClientProtocolVersion(rfbClientPtr cl) +{ + rfbProtocolVersionMsg pv; + int n, major_, minor_; + + if ((n = rfbReadExact(cl, pv, sz_rfbProtocolVersionMsg)) <= 0) { + if (n == 0) + rfbLog("rfbProcessClientProtocolVersion: client gone\n"); + else + rfbLogPerror("rfbProcessClientProtocolVersion: read"); + rfbCloseClient(cl); + return; + } + + pv[sz_rfbProtocolVersionMsg] = 0; + if (sscanf(pv,rfbProtocolVersionFormat,&major_,&minor_) != 2) { + rfbErr("rfbProcessClientProtocolVersion: not a valid RFB client: %s\n", pv); + rfbCloseClient(cl); + return; + } + rfbLog("Client Protocol Version %d.%d\n", major_, minor_); + + if (major_ != rfbProtocolMajorVersion) { + rfbErr("RFB protocol version mismatch - server %d.%d, client %d.%d", + cl->screen->protocolMajorVersion, cl->screen->protocolMinorVersion, + major_,minor_); + rfbCloseClient(cl); + return; + } + + /* Check for the minor version use either of the two standard version of RFB */ + /* + * UltraVNC Viewer detects FileTransfer compatible servers via rfb versions + * 3.4, 3.6, 3.14, 3.16 + * It's a bad method, but it is what they use to enable features... + * maintaining RFB version compatibility across multiple servers is a pain + * Should use something like ServerIdentity encoding + */ + cl->protocolMajorVersion = major_; + cl->protocolMinorVersion = minor_; + + rfbLog("Protocol version sent %d.%d, using %d.%d\n", + major_, minor_, rfbProtocolMajorVersion, cl->protocolMinorVersion); + + rfbAuthNewClient(cl); +} + + +void +rfbClientSendString(rfbClientPtr cl, const char *reason) +{ + char *buf; + int len = strlen(reason); + + rfbLog("rfbClientSendString(\"%s\")\n", reason); + + buf = (char *)malloc(4 + len); + ((uint32_t *)buf)[0] = Swap32IfLE(len); + memcpy(buf + 4, reason, len); + + if (rfbWriteExact(cl, buf, 4 + len) < 0) + rfbLogPerror("rfbClientSendString: write"); + free(buf); + + rfbCloseClient(cl); +} + +/* + * rfbClientConnFailed is called when a client connection has failed either + * because it talks the wrong protocol or it has failed authentication. + */ + +void +rfbClientConnFailed(rfbClientPtr cl, + const char *reason) +{ + char *buf; + int len = strlen(reason); + + rfbLog("rfbClientConnFailed(\"%s\")\n", reason); + + buf = (char *)malloc(8 + len); + ((uint32_t *)buf)[0] = Swap32IfLE(rfbConnFailed); + ((uint32_t *)buf)[1] = Swap32IfLE(len); + memcpy(buf + 8, reason, len); + + if (rfbWriteExact(cl, buf, 8 + len) < 0) + rfbLogPerror("rfbClientConnFailed: write"); + free(buf); + + rfbCloseClient(cl); +} + + +/* + * rfbProcessClientInitMessage is called when the client sends its + * initialisation message. + */ + +static void +rfbProcessClientInitMessage(rfbClientPtr cl) +{ + rfbClientInitMsg ci; + union { + char buf[256]; + rfbServerInitMsg si; + } u; + int len, n; + rfbClientIteratorPtr iterator; + rfbClientPtr otherCl; + rfbExtensionData* extension; + + if (cl->state == RFB_INITIALISATION_SHARED) { + /* In this case behave as though an implicit ClientInit message has + * already been received with a shared-flag of true. */ + ci.shared = 1; + /* Avoid the possibility of exposing the RFB_INITIALISATION_SHARED + * state to calling software. */ + cl->state = RFB_INITIALISATION; + } else { + if ((n = rfbReadExact(cl, (char *)&ci,sz_rfbClientInitMsg)) <= 0) { + if (n == 0) + rfbLog("rfbProcessClientInitMessage: client gone\n"); + else + rfbLogPerror("rfbProcessClientInitMessage: read"); + rfbCloseClient(cl); + return; + } + } + + memset(u.buf,0,sizeof(u.buf)); + + u.si.framebufferWidth = Swap16IfLE(cl->screen->width); + u.si.framebufferHeight = Swap16IfLE(cl->screen->height); + u.si.format = cl->screen->serverFormat; + u.si.format.redMax = Swap16IfLE(u.si.format.redMax); + u.si.format.greenMax = Swap16IfLE(u.si.format.greenMax); + u.si.format.blueMax = Swap16IfLE(u.si.format.blueMax); + + strncpy(u.buf + sz_rfbServerInitMsg, cl->screen->desktopName, 127); + len = strlen(u.buf + sz_rfbServerInitMsg); + u.si.nameLength = Swap32IfLE(len); + + if (rfbWriteExact(cl, u.buf, sz_rfbServerInitMsg + len) < 0) { + rfbLogPerror("rfbProcessClientInitMessage: write"); + rfbCloseClient(cl); + return; + } + + for(extension = cl->extensions; extension;) { + rfbExtensionData* next = extension->next; + if(extension->extension->init && + !extension->extension->init(cl, extension->data)) + /* extension requested that it be removed */ + rfbDisableExtension(cl, extension->extension); + extension = next; + } + + cl->state = RFB_NORMAL; + + if (!cl->reverseConnection && + (cl->screen->neverShared || (!cl->screen->alwaysShared && !ci.shared))) { + + if (cl->screen->dontDisconnect) { + iterator = rfbGetClientIterator(cl->screen); + while ((otherCl = rfbClientIteratorNext(iterator)) != NULL) { + if ((otherCl != cl) && (otherCl->state == RFB_NORMAL)) { + rfbLog("-dontdisconnect: Not shared & existing client\n"); + rfbLog(" refusing new client %s\n", cl->host); + rfbCloseClient(cl); + rfbReleaseClientIterator(iterator); + return; + } + } + rfbReleaseClientIterator(iterator); + } else { + iterator = rfbGetClientIterator(cl->screen); + while ((otherCl = rfbClientIteratorNext(iterator)) != NULL) { + if ((otherCl != cl) && (otherCl->state == RFB_NORMAL)) { + rfbLog("Not shared - closing connection to client %s\n", + otherCl->host); + rfbCloseClient(otherCl); + } + } + rfbReleaseClientIterator(iterator); + } + } +} + +/* The values come in based on the scaled screen, we need to convert them to + * values based on the man screen's coordinate system + */ +static rfbBool rectSwapIfLEAndClip(uint16_t* x,uint16_t* y,uint16_t* w,uint16_t* h, + rfbClientPtr cl) +{ + int x1=Swap16IfLE(*x); + int y1=Swap16IfLE(*y); + int w1=Swap16IfLE(*w); + int h1=Swap16IfLE(*h); + + rfbScaledCorrection(cl->scaledScreen, cl->screen, &x1, &y1, &w1, &h1, "rectSwapIfLEAndClip"); + *x = x1; + *y = y1; + *w = w1; + *h = h1; + + if(*w>cl->screen->width-*x) + *w=cl->screen->width-*x; + /* possible underflow */ + if(*w>cl->screen->width-*x) + return FALSE; + if(*h>cl->screen->height-*y) + *h=cl->screen->height-*y; + if(*h>cl->screen->height-*y) + return FALSE; + + return TRUE; +} + +/* + * Send keyboard state (PointerPos pseudo-encoding). + */ + +rfbBool +rfbSendKeyboardLedState(rfbClientPtr cl) +{ + rfbFramebufferUpdateRectHeader rect; + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.encoding = Swap32IfLE(rfbEncodingKeyboardLedState); + rect.r.x = Swap16IfLE(cl->lastKeyboardLedState); + rect.r.y = 0; + rect.r.w = 0; + rect.r.h = 0; + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + rfbStatRecordEncodingSent(cl, rfbEncodingKeyboardLedState, sz_rfbFramebufferUpdateRectHeader, sz_rfbFramebufferUpdateRectHeader); + + if (!rfbSendUpdateBuf(cl)) + return FALSE; + + return TRUE; +} + + +#define rfbSetBit(buffer, position) (buffer[(position & 255) / 8] |= (1 << (position % 8))) + +/* + * Send rfbEncodingSupportedMessages. + */ + +rfbBool +rfbSendSupportedMessages(rfbClientPtr cl) +{ + rfbFramebufferUpdateRectHeader rect; + rfbSupportedMessages msgs; + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader + + sz_rfbSupportedMessages > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.encoding = Swap32IfLE(rfbEncodingSupportedMessages); + rect.r.x = 0; + rect.r.y = 0; + rect.r.w = Swap16IfLE(sz_rfbSupportedMessages); + rect.r.h = 0; + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + memset((char *)&msgs, 0, sz_rfbSupportedMessages); + rfbSetBit(msgs.client2server, rfbSetPixelFormat); + rfbSetBit(msgs.client2server, rfbFixColourMapEntries); + rfbSetBit(msgs.client2server, rfbSetEncodings); + rfbSetBit(msgs.client2server, rfbFramebufferUpdateRequest); + rfbSetBit(msgs.client2server, rfbKeyEvent); + rfbSetBit(msgs.client2server, rfbPointerEvent); + rfbSetBit(msgs.client2server, rfbClientCutText); + rfbSetBit(msgs.client2server, rfbFileTransfer); + rfbSetBit(msgs.client2server, rfbSetScale); + /*rfbSetBit(msgs.client2server, rfbSetServerInput); */ + /*rfbSetBit(msgs.client2server, rfbSetSW); */ + /*rfbSetBit(msgs.client2server, rfbTextChat); */ + rfbSetBit(msgs.client2server, rfbPalmVNCSetScaleFactor); + rfbSetBit(msgs.client2server, rfbXvp); + + rfbSetBit(msgs.server2client, rfbFramebufferUpdate); + rfbSetBit(msgs.server2client, rfbSetColourMapEntries); + rfbSetBit(msgs.server2client, rfbBell); + rfbSetBit(msgs.server2client, rfbServerCutText); + rfbSetBit(msgs.server2client, rfbResizeFrameBuffer); + rfbSetBit(msgs.server2client, rfbPalmVNCReSizeFrameBuffer); + rfbSetBit(msgs.server2client, rfbXvp); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&msgs, sz_rfbSupportedMessages); + cl->ublen += sz_rfbSupportedMessages; + + rfbStatRecordEncodingSent(cl, rfbEncodingSupportedMessages, + sz_rfbFramebufferUpdateRectHeader+sz_rfbSupportedMessages, + sz_rfbFramebufferUpdateRectHeader+sz_rfbSupportedMessages); + if (!rfbSendUpdateBuf(cl)) + return FALSE; + + return TRUE; +} + + + +/* + * Send rfbEncodingSupportedEncodings. + */ + +rfbBool +rfbSendSupportedEncodings(rfbClientPtr cl) +{ + rfbFramebufferUpdateRectHeader rect; + static uint32_t supported[] = { + rfbEncodingRaw, + rfbEncodingCopyRect, + rfbEncodingRRE, + rfbEncodingCoRRE, + rfbEncodingHextile, +#ifdef LIBVNCSERVER_HAVE_LIBZ + rfbEncodingZlib, + rfbEncodingZRLE, + rfbEncodingZYWRLE, +#endif +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + rfbEncodingTight, +#endif +#ifdef LIBVNCSERVER_HAVE_LIBPNG + rfbEncodingTightPng, +#endif + rfbEncodingUltra, + rfbEncodingUltraZip, + rfbEncodingXCursor, + rfbEncodingRichCursor, + rfbEncodingPointerPos, + rfbEncodingLastRect, + rfbEncodingNewFBSize, + rfbEncodingKeyboardLedState, + rfbEncodingSupportedMessages, + rfbEncodingSupportedEncodings, + rfbEncodingServerIdentity, + }; + uint32_t nEncodings = sizeof(supported) / sizeof(supported[0]), i; + + /* think rfbSetEncodingsMsg */ + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader + + (nEncodings * sizeof(uint32_t)) > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.encoding = Swap32IfLE(rfbEncodingSupportedEncodings); + rect.r.x = 0; + rect.r.y = 0; + rect.r.w = Swap16IfLE(nEncodings * sizeof(uint32_t)); + rect.r.h = Swap16IfLE(nEncodings); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + for (i = 0; i < nEncodings; i++) { + uint32_t encoding = Swap32IfLE(supported[i]); + memcpy(&cl->updateBuf[cl->ublen], (char *)&encoding, sizeof(encoding)); + cl->ublen += sizeof(encoding); + } + + rfbStatRecordEncodingSent(cl, rfbEncodingSupportedEncodings, + sz_rfbFramebufferUpdateRectHeader+(nEncodings * sizeof(uint32_t)), + sz_rfbFramebufferUpdateRectHeader+(nEncodings * sizeof(uint32_t))); + + if (!rfbSendUpdateBuf(cl)) + return FALSE; + + return TRUE; +} + + +void +rfbSetServerVersionIdentity(rfbScreenInfoPtr screen, char *fmt, ...) +{ + char buffer[256]; + va_list ap; + + va_start(ap, fmt); + vsnprintf(buffer, sizeof(buffer)-1, fmt, ap); + va_end(ap); + + if (screen->versionString!=NULL) free(screen->versionString); + screen->versionString = strdup(buffer); +} + +/* + * Send rfbEncodingServerIdentity. + */ + +rfbBool +rfbSendServerIdentity(rfbClientPtr cl) +{ + rfbFramebufferUpdateRectHeader rect; + char buffer[512]; + + /* tack on our library version */ + snprintf(buffer,sizeof(buffer)-1, "%s (%s)", + (cl->screen->versionString==NULL ? "unknown" : cl->screen->versionString), + LIBVNCSERVER_PACKAGE_STRING); + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader + + (strlen(buffer)+1) > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.encoding = Swap32IfLE(rfbEncodingServerIdentity); + rect.r.x = 0; + rect.r.y = 0; + rect.r.w = Swap16IfLE(strlen(buffer)+1); + rect.r.h = 0; + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + memcpy(&cl->updateBuf[cl->ublen], buffer, strlen(buffer)+1); + cl->ublen += strlen(buffer)+1; + + rfbStatRecordEncodingSent(cl, rfbEncodingServerIdentity, + sz_rfbFramebufferUpdateRectHeader+strlen(buffer)+1, + sz_rfbFramebufferUpdateRectHeader+strlen(buffer)+1); + + + if (!rfbSendUpdateBuf(cl)) + return FALSE; + + return TRUE; +} + +/* + * Send an xvp server message + */ + +rfbBool +rfbSendXvp(rfbClientPtr cl, uint8_t version, uint8_t code) +{ + rfbXvpMsg xvp; + + xvp.type = rfbXvp; + xvp.pad = 0; + xvp.version = version; + xvp.code = code; + + LOCK(cl->sendMutex); + if (rfbWriteExact(cl, (char *)&xvp, sz_rfbXvpMsg) < 0) { + rfbLogPerror("rfbSendXvp: write"); + rfbCloseClient(cl); + } + UNLOCK(cl->sendMutex); + + rfbStatRecordMessageSent(cl, rfbXvp, sz_rfbXvpMsg, sz_rfbXvpMsg); + + return TRUE; +} + + +rfbBool rfbSendTextChatMessage(rfbClientPtr cl, uint32_t length, char *buffer) +{ + rfbTextChatMsg tc; + int bytesToSend=0; + + memset((char *)&tc, 0, sizeof(tc)); + tc.type = rfbTextChat; + tc.length = Swap32IfLE(length); + + switch(length) { + case rfbTextChatOpen: + case rfbTextChatClose: + case rfbTextChatFinished: + bytesToSend=0; + break; + default: + bytesToSend=length; + if (bytesToSend>rfbTextMaxSize) + bytesToSend=rfbTextMaxSize; + } + + if (cl->ublen + sz_rfbTextChatMsg + bytesToSend > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + memcpy(&cl->updateBuf[cl->ublen], (char *)&tc, sz_rfbTextChatMsg); + cl->ublen += sz_rfbTextChatMsg; + if (bytesToSend>0) { + memcpy(&cl->updateBuf[cl->ublen], buffer, bytesToSend); + cl->ublen += bytesToSend; + } + rfbStatRecordMessageSent(cl, rfbTextChat, sz_rfbTextChatMsg+bytesToSend, sz_rfbTextChatMsg+bytesToSend); + + if (!rfbSendUpdateBuf(cl)) + return FALSE; + + return TRUE; +} + +#define FILEXFER_ALLOWED_OR_CLOSE_AND_RETURN(msg, cl, ret) \ + if ((cl->screen->getFileTransferPermission != NULL \ + && cl->screen->getFileTransferPermission(cl) != TRUE) \ + || cl->screen->permitFileTransfer != TRUE) { \ + rfbLog("%sUltra File Transfer is disabled, dropping client: %s\n", msg, cl->host); \ + rfbCloseClient(cl); \ + return ret; \ + } + +int DB = 1; + +rfbBool rfbSendFileTransferMessage(rfbClientPtr cl, uint8_t contentType, uint8_t contentParam, uint32_t size, uint32_t length, const char *buffer) +{ + rfbFileTransferMsg ft; + ft.type = rfbFileTransfer; + ft.contentType = contentType; + ft.contentParam = contentParam; + ft.pad = 0; /* UltraVNC did not Swap16LE(ft.contentParam) (Looks like it might be BigEndian) */ + ft.size = Swap32IfLE(size); + ft.length = Swap32IfLE(length); + + FILEXFER_ALLOWED_OR_CLOSE_AND_RETURN("", cl, FALSE); + /* + rfbLog("rfbSendFileTransferMessage( %dtype, %dparam, %dsize, %dlen, %p)\n", contentType, contentParam, size, length, buffer); + */ + LOCK(cl->sendMutex); + if (rfbWriteExact(cl, (char *)&ft, sz_rfbFileTransferMsg) < 0) { + rfbLogPerror("rfbSendFileTransferMessage: write"); + rfbCloseClient(cl); + UNLOCK(cl->sendMutex); + return FALSE; + } + + if (length>0) + { + if (rfbWriteExact(cl, buffer, length) < 0) { + rfbLogPerror("rfbSendFileTransferMessage: write"); + rfbCloseClient(cl); + UNLOCK(cl->sendMutex); + return FALSE; + } + } + UNLOCK(cl->sendMutex); + + rfbStatRecordMessageSent(cl, rfbFileTransfer, sz_rfbFileTransferMsg+length, sz_rfbFileTransferMsg+length); + + return TRUE; +} + + +/* + * UltraVNC uses Windows Structures + */ +#define MAX_PATH 260 + +typedef struct { + uint32_t dwLowDateTime; + uint32_t dwHighDateTime; +} RFB_FILETIME; + +typedef struct { + uint32_t dwFileAttributes; + RFB_FILETIME ftCreationTime; + RFB_FILETIME ftLastAccessTime; + RFB_FILETIME ftLastWriteTime; + uint32_t nFileSizeHigh; + uint32_t nFileSizeLow; + uint32_t dwReserved0; + uint32_t dwReserved1; + uint8_t cFileName[ MAX_PATH ]; + uint8_t cAlternateFileName[ 14 ]; +} RFB_FIND_DATA; + +#define RFB_FILE_ATTRIBUTE_READONLY 0x1 +#define RFB_FILE_ATTRIBUTE_HIDDEN 0x2 +#define RFB_FILE_ATTRIBUTE_SYSTEM 0x4 +#define RFB_FILE_ATTRIBUTE_DIRECTORY 0x10 +#define RFB_FILE_ATTRIBUTE_ARCHIVE 0x20 +#define RFB_FILE_ATTRIBUTE_NORMAL 0x80 +#define RFB_FILE_ATTRIBUTE_TEMPORARY 0x100 +#define RFB_FILE_ATTRIBUTE_COMPRESSED 0x800 + +rfbBool rfbFilenameTranslate2UNIX(rfbClientPtr cl, char *path, char *unixPath) +{ + int x; + char *home=NULL; + + FILEXFER_ALLOWED_OR_CLOSE_AND_RETURN("", cl, FALSE); + + /* C: */ + if (path[0]=='C' && path[1]==':') + strcpy(unixPath, &path[2]); + else + { + home = getenv("HOME"); + if (home!=NULL) + { + strcpy(unixPath, home); + strcat(unixPath,"/"); + strcat(unixPath, path); + } + else + strcpy(unixPath, path); + } + for (x=0;x\"%s\"\n",buffer, path); + + dirp=opendir(path); + if (dirp==NULL) + return rfbSendFileTransferMessage(cl, rfbDirPacket, rfbADirectory, 0, 0, NULL); + /* send back the path name (necessary for links) */ + if (rfbSendFileTransferMessage(cl, rfbDirPacket, rfbADirectory, 0, length, buffer)==FALSE) return FALSE; + for (direntp=readdir(dirp); direntp!=NULL; direntp=readdir(dirp)) + { + /* get stats */ + snprintf(retfilename,sizeof(retfilename),"%s/%s", path, direntp->d_name); + retval = stat(retfilename, &statbuf); + + if (retval==0) + { + memset((char *)&win32filename, 0, sizeof(win32filename)); + win32filename.dwFileAttributes = Swap32IfBE(RFB_FILE_ATTRIBUTE_NORMAL); + if (S_ISDIR(statbuf.st_mode)) + win32filename.dwFileAttributes = Swap32IfBE(RFB_FILE_ATTRIBUTE_DIRECTORY); + win32filename.ftCreationTime.dwLowDateTime = Swap32IfBE(statbuf.st_ctime); /* Intel Order */ + win32filename.ftCreationTime.dwHighDateTime = 0; + win32filename.ftLastAccessTime.dwLowDateTime = Swap32IfBE(statbuf.st_atime); /* Intel Order */ + win32filename.ftLastAccessTime.dwHighDateTime = 0; + win32filename.ftLastWriteTime.dwLowDateTime = Swap32IfBE(statbuf.st_mtime); /* Intel Order */ + win32filename.ftLastWriteTime.dwHighDateTime = 0; + win32filename.nFileSizeLow = Swap32IfBE(statbuf.st_size); /* Intel Order */ + win32filename.nFileSizeHigh = 0; + win32filename.dwReserved0 = 0; + win32filename.dwReserved1 = 0; + + /* If this had the full path, we would need to translate to DOS format ("C:\") */ + /* rfbFilenameTranslate2DOS(cl, retfilename, win32filename.cFileName); */ + strcpy((char *)win32filename.cFileName, direntp->d_name); + + /* Do not show hidden files (but show how to move up the tree) */ + if ((strcmp(direntp->d_name, "..")==0) || (direntp->d_name[0]!='.')) + { + nOptLen = sizeof(RFB_FIND_DATA) - MAX_PATH - 14 + strlen((char *)win32filename.cFileName); + /* + rfbLog("rfbProcessFileTransfer() rfbDirContentRequest: rfbRDirContent: Sending \"%s\"\n", (char *)win32filename.cFileName); + */ + if (rfbSendFileTransferMessage(cl, rfbDirPacket, rfbADirectory, 0, nOptLen, (char *)&win32filename)==FALSE) + { + closedir(dirp); + return FALSE; + } + } + } + } + closedir(dirp); + /* End of the transfer */ + return rfbSendFileTransferMessage(cl, rfbDirPacket, 0, 0, 0, NULL); +} + + +char *rfbProcessFileTransferReadBuffer(rfbClientPtr cl, uint32_t length) +{ + char *buffer=NULL; + int n=0; + + FILEXFER_ALLOWED_OR_CLOSE_AND_RETURN("", cl, NULL); + /* + rfbLog("rfbProcessFileTransferReadBuffer(%dlen)\n", length); + */ + if (length>0) { + buffer=malloc(length+1); + if (buffer!=NULL) { + if ((n = rfbReadExact(cl, (char *)buffer, length)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessFileTransferReadBuffer: read"); + rfbCloseClient(cl); + /* NOTE: don't forget to free(buffer) if you return early! */ + if (buffer!=NULL) free(buffer); + return NULL; + } + /* Null Terminate */ + buffer[length]=0; + } + } + return buffer; +} + + +rfbBool rfbSendFileTransferChunk(rfbClientPtr cl) +{ + /* Allocate buffer for compression */ + unsigned char readBuf[sz_rfbBlockSize]; + int bytesRead=0; + int retval=0; + fd_set wfds; + struct timeval tv; + int n; +#ifdef LIBVNCSERVER_HAVE_LIBZ + unsigned char compBuf[sz_rfbBlockSize + 1024]; + unsigned long nMaxCompSize = sizeof(compBuf); + int nRetC = 0; +#endif + + /* + * Don't close the client if we get into this one because + * it is called from many places to service file transfers. + * Note that permitFileTransfer is checked first. + */ + if (cl->screen->permitFileTransfer != TRUE || + (cl->screen->getFileTransferPermission != NULL + && cl->screen->getFileTransferPermission(cl) != TRUE)) { + return TRUE; + } + + /* If not sending, or no file open... Return as if we sent something! */ + if ((cl->fileTransfer.fd!=-1) && (cl->fileTransfer.sending==1)) + { + FD_ZERO(&wfds); + FD_SET(cl->sock, &wfds); + + /* return immediately */ + tv.tv_sec = 0; + tv.tv_usec = 0; + n = select(cl->sock + 1, NULL, &wfds, NULL, &tv); + + if (n<0) { +#ifdef WIN32 + errno=WSAGetLastError(); +#endif + rfbLog("rfbSendFileTransferChunk() select failed: %s\n", strerror(errno)); + } + /* We have space on the transmit queue */ + if (n > 0) + { + bytesRead = read(cl->fileTransfer.fd, readBuf, sz_rfbBlockSize); + switch (bytesRead) { + case 0: + /* + rfbLog("rfbSendFileTransferChunk(): End-Of-File Encountered\n"); + */ + retval = rfbSendFileTransferMessage(cl, rfbEndOfFile, 0, 0, 0, NULL); + close(cl->fileTransfer.fd); + cl->fileTransfer.fd = -1; + cl->fileTransfer.sending = 0; + cl->fileTransfer.receiving = 0; + return retval; + case -1: + /* TODO : send an error msg to the client... */ +#ifdef WIN32 + errno=WSAGetLastError(); +#endif + rfbLog("rfbSendFileTransferChunk(): %s\n",strerror(errno)); + retval = rfbSendFileTransferMessage(cl, rfbAbortFileTransfer, 0, 0, 0, NULL); + close(cl->fileTransfer.fd); + cl->fileTransfer.fd = -1; + cl->fileTransfer.sending = 0; + cl->fileTransfer.receiving = 0; + return retval; + default: + /* + rfbLog("rfbSendFileTransferChunk(): Read %d bytes\n", bytesRead); + */ + if (!cl->fileTransfer.compressionEnabled) + return rfbSendFileTransferMessage(cl, rfbFilePacket, 0, 0, bytesRead, (char *)readBuf); + else + { +#ifdef LIBVNCSERVER_HAVE_LIBZ + nRetC = compress(compBuf, &nMaxCompSize, readBuf, bytesRead); + /* + rfbLog("Compressed the packet from %d -> %d bytes\n", nMaxCompSize, bytesRead); + */ + + if ((nRetC==0) && (nMaxCompSizeD:\....Z:\ + * + * We replace the "\" char following the drive letter and ":" + * with a char corresponding to the type of drive + * We obtain something like "C:lD:c....Z:n\" + * Isn't it ugly ? + * DRIVE_FIXED = 'l' (local?) + * DRIVE_REMOVABLE = 'f' (floppy?) + * DRIVE_CDROM = 'c' + * DRIVE_REMOTE = 'n' + */ + + /* in unix, there are no 'drives' (We could list mount points though) + * We fake the root as a "C:" for the Winblows users + */ + filename2[0]='C'; + filename2[1]=':'; + filename2[2]='l'; + filename2[3]=0; + filename2[4]=0; + retval = rfbSendFileTransferMessage(cl, rfbDirPacket, rfbADrivesList, 0, 5, filename2); + if (buffer!=NULL) free(buffer); + return retval; + break; + case rfbRDirContent: /* Client requests the content of a directory */ + /* + rfbLog("rfbProcessFileTransfer() rfbDirContentRequest: rfbRDirContent\n"); + */ + if ((buffer = rfbProcessFileTransferReadBuffer(cl, length))==NULL) return FALSE; + retval = rfbSendDirContent(cl, length, buffer); + if (buffer!=NULL) free(buffer); + return retval; + } + break; + + case rfbDirPacket: + rfbLog("rfbProcessFileTransfer() rfbDirPacket\n"); + break; + case rfbFileAcceptHeader: + rfbLog("rfbProcessFileTransfer() rfbFileAcceptHeader\n"); + break; + case rfbCommandReturn: + rfbLog("rfbProcessFileTransfer() rfbCommandReturn\n"); + break; + case rfbFileChecksums: + /* Destination file already exists - the viewer sends the checksums */ + rfbLog("rfbProcessFileTransfer() rfbFileChecksums\n"); + break; + case rfbFileTransferAccess: + rfbLog("rfbProcessFileTransfer() rfbFileTransferAccess\n"); + break; + + /* + * sending from the server to the viewer + */ + + case rfbFileTransferRequest: + /* + rfbLog("rfbProcessFileTransfer() rfbFileTransferRequest:\n"); + */ + /* add some space to the end of the buffer as we will be adding a timespec to it */ + if ((buffer = rfbProcessFileTransferReadBuffer(cl, length))==NULL) return FALSE; + /* The client requests a File */ + rfbFilenameTranslate2UNIX(cl, buffer, filename1); + cl->fileTransfer.fd=open(filename1, O_RDONLY, 0744); + + /* + */ + if (DB) rfbLog("rfbProcessFileTransfer() rfbFileTransferRequest(\"%s\"->\"%s\") Open: %s fd=%d\n", buffer, filename1, (cl->fileTransfer.fd==-1?"Failed":"Success"), cl->fileTransfer.fd); + + if (cl->fileTransfer.fd!=-1) { + if (fstat(cl->fileTransfer.fd, &statbuf)!=0) { + close(cl->fileTransfer.fd); + cl->fileTransfer.fd=-1; + } + else + { + /* Add the File Time Stamp to the filename */ + strftime(timespec, sizeof(timespec), "%m/%d/%Y %H:%M",gmtime(&statbuf.st_ctime)); + buffer=realloc(buffer, length + strlen(timespec) + 2); /* comma, and Null term */ + if (buffer==NULL) { + rfbLog("rfbProcessFileTransfer() rfbFileTransferRequest: Failed to malloc %d bytes\n", length + strlen(timespec) + 2); + return FALSE; + } + strcat(buffer,","); + strcat(buffer, timespec); + length = strlen(buffer); + if (DB) rfbLog("rfbProcessFileTransfer() buffer is now: \"%s\"\n", buffer); + } + } + + /* The viewer supports compression if size==1 */ + cl->fileTransfer.compressionEnabled = (size==1); + + /* + rfbLog("rfbProcessFileTransfer() rfbFileTransferRequest(\"%s\"->\"%s\")%s\n", buffer, filename1, (size==1?" ":"")); + */ + + /* File Size in bytes, 0xFFFFFFFF (-1) means error */ + retval = rfbSendFileTransferMessage(cl, rfbFileHeader, 0, (cl->fileTransfer.fd==-1 ? -1 : statbuf.st_size), length, buffer); + + if (cl->fileTransfer.fd==-1) + { + if (buffer!=NULL) free(buffer); + return retval; + } + /* setup filetransfer stuff */ + cl->fileTransfer.fileSize = statbuf.st_size; + cl->fileTransfer.numPackets = statbuf.st_size / sz_rfbBlockSize; + cl->fileTransfer.receiving = 0; + cl->fileTransfer.sending = 0; /* set when we receive a rfbFileHeader: */ + + /* TODO: finish 64-bit file size support */ + sizeHtmp = 0; + LOCK(cl->sendMutex); + if (rfbWriteExact(cl, (char *)&sizeHtmp, 4) < 0) { + rfbLogPerror("rfbProcessFileTransfer: write"); + rfbCloseClient(cl); + UNLOCK(cl->sendMutex); + if (buffer!=NULL) free(buffer); + return FALSE; + } + UNLOCK(cl->sendMutex); + break; + + case rfbFileHeader: + /* Destination file (viewer side) is ready for reception (size > 0) or not (size = -1) */ + if (size==-1) { + rfbLog("rfbProcessFileTransfer() rfbFileHeader (error, aborting)\n"); + close(cl->fileTransfer.fd); + cl->fileTransfer.fd=-1; + return TRUE; + } + + /* + rfbLog("rfbProcessFileTransfer() rfbFileHeader (%d bytes of a file)\n", size); + */ + + /* Starts the transfer! */ + cl->fileTransfer.sending=1; + return rfbSendFileTransferChunk(cl); + break; + + + /* + * sending from the viewer to the server + */ + + case rfbFileTransferOffer: + /* client is sending a file to us */ + /* buffer contains full path name (plus FileTime) */ + /* size contains size of the file */ + /* + rfbLog("rfbProcessFileTransfer() rfbFileTransferOffer:\n"); + */ + if ((buffer = rfbProcessFileTransferReadBuffer(cl, length))==NULL) return FALSE; + + /* Parse the FileTime */ + p = strrchr(buffer, ','); + if (p!=NULL) { + *p = '\0'; + strcpy(szFileTime, p+1); + } else + szFileTime[0]=0; + + + + /* Need to read in sizeHtmp */ + if ((n = rfbReadExact(cl, (char *)&sizeHtmp, 4)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessFileTransfer: read sizeHtmp"); + rfbCloseClient(cl); + /* NOTE: don't forget to free(buffer) if you return early! */ + if (buffer!=NULL) free(buffer); + return FALSE; + } + sizeHtmp = Swap32IfLE(sizeHtmp); + + rfbFilenameTranslate2UNIX(cl, buffer, filename1); + + /* If the file exists... We can send a rfbFileChecksums back to the client before we send an rfbFileAcceptHeader */ + /* TODO: Delta Transfer */ + + cl->fileTransfer.fd=open(filename1, O_CREAT|O_WRONLY|O_TRUNC, 0744); + if (DB) rfbLog("rfbProcessFileTransfer() rfbFileTransferOffer(\"%s\"->\"%s\") %s %s fd=%d\n", buffer, filename1, (cl->fileTransfer.fd==-1?"Failed":"Success"), (cl->fileTransfer.fd==-1?strerror(errno):""), cl->fileTransfer.fd); + /* + */ + + /* File Size in bytes, 0xFFFFFFFF (-1) means error */ + retval = rfbSendFileTransferMessage(cl, rfbFileAcceptHeader, 0, (cl->fileTransfer.fd==-1 ? -1 : 0), length, buffer); + if (cl->fileTransfer.fd==-1) { + free(buffer); + return retval; + } + + /* setup filetransfer stuff */ + cl->fileTransfer.fileSize = size; + cl->fileTransfer.numPackets = size / sz_rfbBlockSize; + cl->fileTransfer.receiving = 1; + cl->fileTransfer.sending = 0; + break; + + case rfbFilePacket: + /* + rfbLog("rfbProcessFileTransfer() rfbFilePacket:\n"); + */ + if ((buffer = rfbProcessFileTransferReadBuffer(cl, length))==NULL) return FALSE; + if (cl->fileTransfer.fd!=-1) { + /* buffer contains the contents of the file */ + if (size==0) + retval=write(cl->fileTransfer.fd, buffer, length); + else + { +#ifdef LIBVNCSERVER_HAVE_LIBZ + /* compressed packet */ + nRet = uncompress(compBuff,&nRawBytes,(const unsigned char*)buffer, length); + if(nRet == Z_OK) + retval=write(cl->fileTransfer.fd, (char*)compBuff, nRawBytes); + else + retval = -1; +#else + /* Write the file out as received... */ + retval=write(cl->fileTransfer.fd, buffer, length); +#endif + } + if (retval==-1) + { + close(cl->fileTransfer.fd); + cl->fileTransfer.fd=-1; + cl->fileTransfer.sending = 0; + cl->fileTransfer.receiving = 0; + } + } + break; + + case rfbEndOfFile: + if (DB) rfbLog("rfbProcessFileTransfer() rfbEndOfFile\n"); + /* + */ + if (cl->fileTransfer.fd!=-1) + close(cl->fileTransfer.fd); + cl->fileTransfer.fd=-1; + cl->fileTransfer.sending = 0; + cl->fileTransfer.receiving = 0; + break; + + case rfbAbortFileTransfer: + if (DB) rfbLog("rfbProcessFileTransfer() rfbAbortFileTransfer\n"); + /* + */ + if (cl->fileTransfer.fd!=-1) + { + close(cl->fileTransfer.fd); + cl->fileTransfer.fd=-1; + cl->fileTransfer.sending = 0; + cl->fileTransfer.receiving = 0; + } + else + { + /* We use this message for FileTransfer rights (<=RC18 versions) + * The client asks for FileTransfer permission + */ + if (contentParam == 0) + { + rfbLog("rfbProcessFileTransfer() File Transfer Permission DENIED! (Client Version <=RC18)\n"); + /* Old method for FileTransfer handshake perimssion (<=RC18) (Deny it)*/ + return rfbSendFileTransferMessage(cl, rfbAbortFileTransfer, 0, -1, 0, ""); + } + /* New method is allowed */ + if (cl->screen->getFileTransferPermission!=NULL) + { + if (cl->screen->getFileTransferPermission(cl)==TRUE) + { + rfbLog("rfbProcessFileTransfer() File Transfer Permission Granted!\n"); + return rfbSendFileTransferMessage(cl, rfbFileTransferAccess, 0, 1 , 0, ""); /* Permit */ + } + else + { + rfbLog("rfbProcessFileTransfer() File Transfer Permission DENIED!\n"); + return rfbSendFileTransferMessage(cl, rfbFileTransferAccess, 0, -1 , 0, ""); /* Deny */ + } + } + else + { + if (cl->screen->permitFileTransfer) + { + rfbLog("rfbProcessFileTransfer() File Transfer Permission Granted!\n"); + return rfbSendFileTransferMessage(cl, rfbFileTransferAccess, 0, 1 , 0, ""); /* Permit */ + } + else + { + rfbLog("rfbProcessFileTransfer() File Transfer Permission DENIED by default!\n"); + return rfbSendFileTransferMessage(cl, rfbFileTransferAccess, 0, -1 , 0, ""); /* DEFAULT: DENY (for security) */ + } + + } + } + break; + + + case rfbCommand: + /* + rfbLog("rfbProcessFileTransfer() rfbCommand:\n"); + */ + if ((buffer = rfbProcessFileTransferReadBuffer(cl, length))==NULL) return FALSE; + switch (contentParam) { + case rfbCDirCreate: /* Client requests the creation of a directory */ + rfbFilenameTranslate2UNIX(cl, buffer, filename1); + retval = mkdir(filename1, 0755); + if (DB) rfbLog("rfbProcessFileTransfer() rfbCommand: rfbCDirCreate(\"%s\"->\"%s\") %s\n", buffer, filename1, (retval==-1?"Failed":"Success")); + /* + */ + retval = rfbSendFileTransferMessage(cl, rfbCommandReturn, rfbADirCreate, retval, length, buffer); + if (buffer!=NULL) free(buffer); + return retval; + case rfbCFileDelete: /* Client requests the deletion of a file */ + rfbFilenameTranslate2UNIX(cl, buffer, filename1); + if (stat(filename1,&statbuf)==0) + { + if (S_ISDIR(statbuf.st_mode)) + retval = rmdir(filename1); + else + retval = unlink(filename1); + } + else retval=-1; + retval = rfbSendFileTransferMessage(cl, rfbCommandReturn, rfbAFileDelete, retval, length, buffer); + if (buffer!=NULL) free(buffer); + return retval; + case rfbCFileRename: /* Client requests the Renaming of a file/directory */ + p = strrchr(buffer, '*'); + if (p != NULL) + { + /* Split into 2 filenames ('*' is a seperator) */ + *p = '\0'; + rfbFilenameTranslate2UNIX(cl, buffer, filename1); + rfbFilenameTranslate2UNIX(cl, p+1, filename2); + retval = rename(filename1,filename2); + if (DB) rfbLog("rfbProcessFileTransfer() rfbCommand: rfbCFileRename(\"%s\"->\"%s\" -->> \"%s\"->\"%s\") %s\n", buffer, filename1, p+1, filename2, (retval==-1?"Failed":"Success")); + /* + */ + /* Restore the buffer so the reply is good */ + *p = '*'; + retval = rfbSendFileTransferMessage(cl, rfbCommandReturn, rfbAFileRename, retval, length, buffer); + if (buffer!=NULL) free(buffer); + return retval; + } + break; + } + + break; + } + + /* NOTE: don't forget to free(buffer) if you return early! */ + if (buffer!=NULL) free(buffer); + return TRUE; +} + +/* + * rfbProcessClientNormalMessage is called when the client has sent a normal + * protocol message. + */ + +static void +rfbProcessClientNormalMessage(rfbClientPtr cl) +{ + int n=0; + rfbClientToServerMsg msg; + char *str; + int i; + uint32_t enc=0; + uint32_t lastPreferredEncoding = -1; + char encBuf[64]; + char encBuf2[64]; + +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS + if (cl->wsctx && webSocketCheckDisconnect(cl)) + return; +#endif + + if ((n = rfbReadExact(cl, (char *)&msg, 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + + switch (msg.type) { + + case rfbSetPixelFormat: + + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbSetPixelFormatMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + + cl->format.bitsPerPixel = msg.spf.format.bitsPerPixel; + cl->format.depth = msg.spf.format.depth; + cl->format.bigEndian = (msg.spf.format.bigEndian ? TRUE : FALSE); + cl->format.trueColour = (msg.spf.format.trueColour ? TRUE : FALSE); + cl->format.redMax = Swap16IfLE(msg.spf.format.redMax); + cl->format.greenMax = Swap16IfLE(msg.spf.format.greenMax); + cl->format.blueMax = Swap16IfLE(msg.spf.format.blueMax); + cl->format.redShift = msg.spf.format.redShift; + cl->format.greenShift = msg.spf.format.greenShift; + cl->format.blueShift = msg.spf.format.blueShift; + + cl->readyForSetColourMapEntries = TRUE; + cl->screen->setTranslateFunction(cl); + + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetPixelFormatMsg, sz_rfbSetPixelFormatMsg); + + return; + + + case rfbFixColourMapEntries: + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbFixColourMapEntriesMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetPixelFormatMsg, sz_rfbSetPixelFormatMsg); + rfbLog("rfbProcessClientNormalMessage: %s", + "FixColourMapEntries unsupported\n"); + rfbCloseClient(cl); + return; + + + /* NOTE: Some clients send us a set of encodings (ie: PointerPos) designed to enable/disable features... + * We may want to look into this... + * Example: + * case rfbEncodingXCursor: + * cl->enableCursorShapeUpdates = TRUE; + * + * Currently: cl->enableCursorShapeUpdates can *never* be turned off... + */ + case rfbSetEncodings: + { + + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbSetEncodingsMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + + msg.se.nEncodings = Swap16IfLE(msg.se.nEncodings); + + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetEncodingsMsg+(msg.se.nEncodings*4),sz_rfbSetEncodingsMsg+(msg.se.nEncodings*4)); + + /* + * UltraVNC Client has the ability to adapt to changing network environments + * So, let's give it a change to tell us what it wants now! + */ + if (cl->preferredEncoding!=-1) + lastPreferredEncoding = cl->preferredEncoding; + + /* Reset all flags to defaults (allows us to switch between PointerPos and Server Drawn Cursors) */ + cl->preferredEncoding=-1; + cl->useCopyRect = FALSE; + cl->useNewFBSize = FALSE; + cl->cursorWasChanged = FALSE; + cl->useRichCursorEncoding = FALSE; + cl->enableCursorPosUpdates = FALSE; + cl->enableCursorShapeUpdates = FALSE; + cl->enableCursorShapeUpdates = FALSE; + cl->enableLastRectEncoding = FALSE; + cl->enableKeyboardLedState = FALSE; + cl->enableSupportedMessages = FALSE; + cl->enableSupportedEncodings = FALSE; + cl->enableServerIdentity = FALSE; +#if defined(LIBVNCSERVER_HAVE_LIBZ) || defined(LIBVNCSERVER_HAVE_LIBPNG) + cl->tightQualityLevel = -1; +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + cl->tightCompressLevel = TIGHT_DEFAULT_COMPRESSION; + cl->turboSubsampLevel = TURBO_DEFAULT_SUBSAMP; + cl->turboQualityLevel = -1; +#endif +#endif + + + for (i = 0; i < msg.se.nEncodings; i++) { + if ((n = rfbReadExact(cl, (char *)&enc, 4)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + enc = Swap32IfLE(enc); + + switch (enc) { + + case rfbEncodingCopyRect: + cl->useCopyRect = TRUE; + break; + case rfbEncodingRaw: + case rfbEncodingRRE: + case rfbEncodingCoRRE: + case rfbEncodingHextile: + case rfbEncodingUltra: +#ifdef LIBVNCSERVER_HAVE_LIBZ + case rfbEncodingZlib: + case rfbEncodingZRLE: + case rfbEncodingZYWRLE: +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + case rfbEncodingTight: +#endif +#endif +#ifdef LIBVNCSERVER_HAVE_LIBPNG + case rfbEncodingTightPng: +#endif + /* The first supported encoding is the 'preferred' encoding */ + if (cl->preferredEncoding == -1) + cl->preferredEncoding = enc; + + + break; + case rfbEncodingXCursor: + if(!cl->screen->dontConvertRichCursorToXCursor) { + rfbLog("Enabling X-style cursor updates for client %s\n", + cl->host); + /* if cursor was drawn, hide the cursor */ + if(!cl->enableCursorShapeUpdates) + rfbRedrawAfterHideCursor(cl,NULL); + + cl->enableCursorShapeUpdates = TRUE; + cl->cursorWasChanged = TRUE; + } + break; + case rfbEncodingRichCursor: + rfbLog("Enabling full-color cursor updates for client %s\n", + cl->host); + /* if cursor was drawn, hide the cursor */ + if(!cl->enableCursorShapeUpdates) + rfbRedrawAfterHideCursor(cl,NULL); + + cl->enableCursorShapeUpdates = TRUE; + cl->useRichCursorEncoding = TRUE; + cl->cursorWasChanged = TRUE; + break; + case rfbEncodingPointerPos: + if (!cl->enableCursorPosUpdates) { + rfbLog("Enabling cursor position updates for client %s\n", + cl->host); + cl->enableCursorPosUpdates = TRUE; + cl->cursorWasMoved = TRUE; + } + break; + case rfbEncodingLastRect: + if (!cl->enableLastRectEncoding) { + rfbLog("Enabling LastRect protocol extension for client " + "%s\n", cl->host); + cl->enableLastRectEncoding = TRUE; + } + break; + case rfbEncodingNewFBSize: + if (!cl->useNewFBSize) { + rfbLog("Enabling NewFBSize protocol extension for client " + "%s\n", cl->host); + cl->useNewFBSize = TRUE; + } + break; + case rfbEncodingKeyboardLedState: + if (!cl->enableKeyboardLedState) { + rfbLog("Enabling KeyboardLedState protocol extension for client " + "%s\n", cl->host); + cl->enableKeyboardLedState = TRUE; + } + break; + case rfbEncodingSupportedMessages: + if (!cl->enableSupportedMessages) { + rfbLog("Enabling SupportedMessages protocol extension for client " + "%s\n", cl->host); + cl->enableSupportedMessages = TRUE; + } + break; + case rfbEncodingSupportedEncodings: + if (!cl->enableSupportedEncodings) { + rfbLog("Enabling SupportedEncodings protocol extension for client " + "%s\n", cl->host); + cl->enableSupportedEncodings = TRUE; + } + break; + case rfbEncodingServerIdentity: + if (!cl->enableServerIdentity) { + rfbLog("Enabling ServerIdentity protocol extension for client " + "%s\n", cl->host); + cl->enableServerIdentity = TRUE; + } + break; + case rfbEncodingXvp: + rfbLog("Enabling Xvp protocol extension for client " + "%s\n", cl->host); + if (!rfbSendXvp(cl, 1, rfbXvp_Init)) { + rfbCloseClient(cl); + return; + } + break; + default: +#if defined(LIBVNCSERVER_HAVE_LIBZ) || defined(LIBVNCSERVER_HAVE_LIBPNG) + if ( enc >= (uint32_t)rfbEncodingCompressLevel0 && + enc <= (uint32_t)rfbEncodingCompressLevel9 ) { + cl->zlibCompressLevel = enc & 0x0F; +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + cl->tightCompressLevel = enc & 0x0F; + rfbLog("Using compression level %d for client %s\n", + cl->tightCompressLevel, cl->host); +#endif + } else if ( enc >= (uint32_t)rfbEncodingQualityLevel0 && + enc <= (uint32_t)rfbEncodingQualityLevel9 ) { + cl->tightQualityLevel = enc & 0x0F; + rfbLog("Using image quality level %d for client %s\n", + cl->tightQualityLevel, cl->host); +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + cl->turboQualityLevel = tight2turbo_qual[enc & 0x0F]; + cl->turboSubsampLevel = tight2turbo_subsamp[enc & 0x0F]; + rfbLog("Using JPEG subsampling %d, Q%d for client %s\n", + cl->turboSubsampLevel, cl->turboQualityLevel, cl->host); + } else if ( enc >= (uint32_t)rfbEncodingFineQualityLevel0 + 1 && + enc <= (uint32_t)rfbEncodingFineQualityLevel100 ) { + cl->turboQualityLevel = enc & 0xFF; + rfbLog("Using fine quality level %d for client %s\n", + cl->turboQualityLevel, cl->host); + } else if ( enc >= (uint32_t)rfbEncodingSubsamp1X && + enc <= (uint32_t)rfbEncodingSubsampGray ) { + cl->turboSubsampLevel = enc & 0xFF; + rfbLog("Using subsampling level %d for client %s\n", + cl->turboSubsampLevel, cl->host); +#endif + } else +#endif + { + rfbExtensionData* e; + for(e = cl->extensions; e;) { + rfbExtensionData* next = e->next; + if(e->extension->enablePseudoEncoding && + e->extension->enablePseudoEncoding(cl, + &e->data, (int)enc)) + /* ext handles this encoding */ + break; + e = next; + } + if(e == NULL) { + rfbBool handled = FALSE; + /* if the pseudo encoding is not handled by the + enabled extensions, search through all + extensions. */ + rfbProtocolExtension* e; + + for(e = rfbGetExtensionIterator(); e;) { + int* encs = e->pseudoEncodings; + while(encs && *encs!=0) { + if(*encs==(int)enc) { + void* data = NULL; + if(!e->enablePseudoEncoding(cl, &data, (int)enc)) { + rfbLog("Installed extension pretends to handle pseudo encoding 0x%x, but does not!\n",(int)enc); + } else { + rfbEnableExtension(cl, e, data); + handled = TRUE; + e = NULL; + break; + } + } + encs++; + } + + if(e) + e = e->next; + } + rfbReleaseExtensionIterator(); + + if(!handled) + rfbLog("rfbProcessClientNormalMessage: " + "ignoring unsupported encoding type %s\n", + encodingName(enc,encBuf,sizeof(encBuf))); + } + } + } + } + + + + if (cl->preferredEncoding == -1) { + if (lastPreferredEncoding==-1) { + cl->preferredEncoding = rfbEncodingRaw; + rfbLog("Defaulting to %s encoding for client %s\n", encodingName(cl->preferredEncoding,encBuf,sizeof(encBuf)),cl->host); + } + else { + cl->preferredEncoding = lastPreferredEncoding; + rfbLog("Sticking with %s encoding for client %s\n", encodingName(cl->preferredEncoding,encBuf,sizeof(encBuf)),cl->host); + } + } + else + { + if (lastPreferredEncoding==-1) { + rfbLog("Using %s encoding for client %s\n", encodingName(cl->preferredEncoding,encBuf,sizeof(encBuf)),cl->host); + } else { + rfbLog("Switching from %s to %s Encoding for client %s\n", + encodingName(lastPreferredEncoding,encBuf2,sizeof(encBuf2)), + encodingName(cl->preferredEncoding,encBuf,sizeof(encBuf)), cl->host); + } + } + + if (cl->enableCursorPosUpdates && !cl->enableCursorShapeUpdates) { + rfbLog("Disabling cursor position updates for client %s\n", + cl->host); + cl->enableCursorPosUpdates = FALSE; + } + + return; + } + + + case rfbFramebufferUpdateRequest: + { + sraRegionPtr tmpRegion; + + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbFramebufferUpdateRequestMsg-1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbFramebufferUpdateRequestMsg,sz_rfbFramebufferUpdateRequestMsg); + + /* The values come in based on the scaled screen, we need to convert them to + * values based on the main screen's coordinate system + */ + if(!rectSwapIfLEAndClip(&msg.fur.x,&msg.fur.y,&msg.fur.w,&msg.fur.h,cl)) + { + rfbLog("Warning, ignoring rfbFramebufferUpdateRequest: %dXx%dY-%dWx%dH\n",msg.fur.x, msg.fur.y, msg.fur.w, msg.fur.h); + return; + } + + + tmpRegion = + sraRgnCreateRect(msg.fur.x, + msg.fur.y, + msg.fur.x+msg.fur.w, + msg.fur.y+msg.fur.h); + + LOCK(cl->updateMutex); + sraRgnOr(cl->requestedRegion,tmpRegion); + + if (!cl->readyForSetColourMapEntries) { + /* client hasn't sent a SetPixelFormat so is using server's */ + cl->readyForSetColourMapEntries = TRUE; + if (!cl->format.trueColour) { + if (!rfbSetClientColourMap(cl, 0, 0)) { + sraRgnDestroy(tmpRegion); + TSIGNAL(cl->updateCond); + UNLOCK(cl->updateMutex); + return; + } + } + } + + if (!msg.fur.incremental) { + sraRgnOr(cl->modifiedRegion,tmpRegion); + sraRgnSubtract(cl->copyRegion,tmpRegion); + } + TSIGNAL(cl->updateCond); + UNLOCK(cl->updateMutex); + + sraRgnDestroy(tmpRegion); + + return; + } + + case rfbKeyEvent: + + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbKeyEventMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbKeyEventMsg, sz_rfbKeyEventMsg); + + if(!cl->viewOnly) { + cl->screen->kbdAddEvent(msg.ke.down, (rfbKeySym)Swap32IfLE(msg.ke.key), cl); + } + + return; + + + case rfbPointerEvent: + + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbPointerEventMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbPointerEventMsg, sz_rfbPointerEventMsg); + + if (cl->screen->pointerClient && cl->screen->pointerClient != cl) + return; + + if (msg.pe.buttonMask == 0) + cl->screen->pointerClient = NULL; + else + cl->screen->pointerClient = cl; + + if(!cl->viewOnly) { + if (msg.pe.buttonMask != cl->lastPtrButtons || + cl->screen->deferPtrUpdateTime == 0) { + cl->screen->ptrAddEvent(msg.pe.buttonMask, + ScaleX(cl->scaledScreen, cl->screen, Swap16IfLE(msg.pe.x)), + ScaleY(cl->scaledScreen, cl->screen, Swap16IfLE(msg.pe.y)), + cl); + cl->lastPtrButtons = msg.pe.buttonMask; + } else { + cl->lastPtrX = ScaleX(cl->scaledScreen, cl->screen, Swap16IfLE(msg.pe.x)); + cl->lastPtrY = ScaleY(cl->scaledScreen, cl->screen, Swap16IfLE(msg.pe.y)); + cl->lastPtrButtons = msg.pe.buttonMask; + } + } + return; + + + case rfbFileTransfer: + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbFileTransferMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + msg.ft.size = Swap32IfLE(msg.ft.size); + msg.ft.length = Swap32IfLE(msg.ft.length); + /* record statistics in rfbProcessFileTransfer as length is filled with garbage when it is not valid */ + rfbProcessFileTransfer(cl, msg.ft.contentType, msg.ft.contentParam, msg.ft.size, msg.ft.length); + return; + + case rfbSetSW: + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbSetSWMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + msg.sw.x = Swap16IfLE(msg.sw.x); + msg.sw.y = Swap16IfLE(msg.sw.y); + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetSWMsg, sz_rfbSetSWMsg); + /* msg.sw.status is not initialized in the ultraVNC viewer and contains random numbers (why???) */ + + rfbLog("Received a rfbSetSingleWindow(%d x, %d y)\n", msg.sw.x, msg.sw.y); + if (cl->screen->setSingleWindow!=NULL) + cl->screen->setSingleWindow(cl, msg.sw.x, msg.sw.y); + return; + + case rfbSetServerInput: + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbSetServerInputMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetServerInputMsg, sz_rfbSetServerInputMsg); + + /* msg.sim.pad is not initialized in the ultraVNC viewer and contains random numbers (why???) */ + /* msg.sim.pad = Swap16IfLE(msg.sim.pad); */ + + rfbLog("Received a rfbSetServerInput(%d status)\n", msg.sim.status); + if (cl->screen->setServerInput!=NULL) + cl->screen->setServerInput(cl, msg.sim.status); + return; + + case rfbTextChat: + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbTextChatMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + + msg.tc.pad2 = Swap16IfLE(msg.tc.pad2); + msg.tc.length = Swap32IfLE(msg.tc.length); + + switch (msg.tc.length) { + case rfbTextChatOpen: + case rfbTextChatClose: + case rfbTextChatFinished: + /* commands do not have text following */ + /* Why couldn't they have used the pad byte??? */ + str=NULL; + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbTextChatMsg, sz_rfbTextChatMsg); + break; + default: + if ((msg.tc.length>0) && (msg.tc.length%d\n", msg.tc.length, rfbTextMaxSize); + rfbCloseClient(cl); + return; + } + } + + /* Note: length can be commands: rfbTextChatOpen, rfbTextChatClose, and rfbTextChatFinished + * at which point, the str is NULL (as it is not sent) + */ + if (cl->screen->setTextChat!=NULL) + cl->screen->setTextChat(cl, msg.tc.length, str); + + free(str); + return; + + + case rfbClientCutText: + + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbClientCutTextMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + + msg.cct.length = Swap32IfLE(msg.cct.length); + + str = (char *)malloc(msg.cct.length); + + if ((n = rfbReadExact(cl, str, msg.cct.length)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + free(str); + rfbCloseClient(cl); + return; + } + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbClientCutTextMsg+msg.cct.length, sz_rfbClientCutTextMsg+msg.cct.length); + if(!cl->viewOnly) { + cl->screen->setXCutText(str, msg.cct.length, cl); + } + free(str); + + return; + + case rfbPalmVNCSetScaleFactor: + cl->PalmVNC = TRUE; + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbSetScaleMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetScaleMsg, sz_rfbSetScaleMsg); + rfbLog("rfbSetScale(%d)\n", msg.ssc.scale); + rfbScalingSetup(cl,cl->screen->width/msg.ssc.scale, cl->screen->height/msg.ssc.scale); + + rfbSendNewScaleSize(cl); + return; + + case rfbSetScale: + + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbSetScaleMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetScaleMsg, sz_rfbSetScaleMsg); + rfbLog("rfbSetScale(%d)\n", msg.ssc.scale); + rfbScalingSetup(cl,cl->screen->width/msg.ssc.scale, cl->screen->height/msg.ssc.scale); + + rfbSendNewScaleSize(cl); + return; + + case rfbXvp: + + if ((n = rfbReadExact(cl, ((char *)&msg) + 1, + sz_rfbXvpMsg - 1)) <= 0) { + if (n != 0) + rfbLogPerror("rfbProcessClientNormalMessage: read"); + rfbCloseClient(cl); + return; + } + rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbXvpMsg, sz_rfbXvpMsg); + + /* only version when is defined, so echo back a fail */ + if(msg.xvp.version != 1) { + rfbSendXvp(cl, msg.xvp.version, rfbXvp_Fail); + } + else { + /* if the hook exists and fails, send a fail msg */ + if(cl->screen->xvpHook && !cl->screen->xvpHook(cl, msg.xvp.version, msg.xvp.code)) + rfbSendXvp(cl, 1, rfbXvp_Fail); + } + return; + + default: + { + rfbExtensionData *e,*next; + + for(e=cl->extensions; e;) { + next = e->next; + if(e->extension->handleMessage && + e->extension->handleMessage(cl, e->data, &msg)) + { + rfbStatRecordMessageRcvd(cl, msg.type, 0, 0); /* Extension should handle this */ + return; + } + e = next; + } + + rfbLog("rfbProcessClientNormalMessage: unknown message type %d\n", + msg.type); + rfbLog(" ... closing connection\n"); + rfbCloseClient(cl); + return; + } + } +} + + + +/* + * rfbSendFramebufferUpdate - send the currently pending framebuffer update to + * the RFB client. + * givenUpdateRegion is not changed. + */ + +rfbBool +rfbSendFramebufferUpdate(rfbClientPtr cl, + sraRegionPtr givenUpdateRegion) +{ + sraRectangleIterator* i=NULL; + sraRect rect; + int nUpdateRegionRects; + rfbFramebufferUpdateMsg *fu = (rfbFramebufferUpdateMsg *)cl->updateBuf; + sraRegionPtr updateRegion,updateCopyRegion,tmpRegion; + int dx, dy; + rfbBool sendCursorShape = FALSE; + rfbBool sendCursorPos = FALSE; + rfbBool sendKeyboardLedState = FALSE; + rfbBool sendSupportedMessages = FALSE; + rfbBool sendSupportedEncodings = FALSE; + rfbBool sendServerIdentity = FALSE; + rfbBool result = TRUE; + + + if(cl->screen->displayHook) + cl->screen->displayHook(cl); + + /* + * If framebuffer size was changed and the client supports NewFBSize + * encoding, just send NewFBSize marker and return. + */ + + if (cl->useNewFBSize && cl->newFBSizePending) { + LOCK(cl->updateMutex); + cl->newFBSizePending = FALSE; + UNLOCK(cl->updateMutex); + fu->type = rfbFramebufferUpdate; + fu->nRects = Swap16IfLE(1); + cl->ublen = sz_rfbFramebufferUpdateMsg; + if (!rfbSendNewFBSize(cl, cl->scaledScreen->width, cl->scaledScreen->height)) { + if(cl->screen->displayFinishedHook) + cl->screen->displayFinishedHook(cl, FALSE); + return FALSE; + } + result = rfbSendUpdateBuf(cl); + if(cl->screen->displayFinishedHook) + cl->screen->displayFinishedHook(cl, result); + return result; + } + + /* + * If this client understands cursor shape updates, cursor should be + * removed from the framebuffer. Otherwise, make sure it's put up. + */ + + if (cl->enableCursorShapeUpdates) { + if (cl->cursorWasChanged && cl->readyForSetColourMapEntries) + sendCursorShape = TRUE; + } + + /* + * Do we plan to send cursor position update? + */ + + if (cl->enableCursorPosUpdates && cl->cursorWasMoved) + sendCursorPos = TRUE; + + /* + * Do we plan to send a keyboard state update? + */ + if ((cl->enableKeyboardLedState) && + (cl->screen->getKeyboardLedStateHook!=NULL)) + { + int x; + x=cl->screen->getKeyboardLedStateHook(cl->screen); + if (x!=cl->lastKeyboardLedState) + { + sendKeyboardLedState = TRUE; + cl->lastKeyboardLedState=x; + } + } + + /* + * Do we plan to send a rfbEncodingSupportedMessages? + */ + if (cl->enableSupportedMessages) + { + sendSupportedMessages = TRUE; + /* We only send this message ONCE + * (We disable it here) + */ + cl->enableSupportedMessages = FALSE; + } + /* + * Do we plan to send a rfbEncodingSupportedEncodings? + */ + if (cl->enableSupportedEncodings) + { + sendSupportedEncodings = TRUE; + /* We only send this message ONCE + * (We disable it here) + */ + cl->enableSupportedEncodings = FALSE; + } + /* + * Do we plan to send a rfbEncodingServerIdentity? + */ + if (cl->enableServerIdentity) + { + sendServerIdentity = TRUE; + /* We only send this message ONCE + * (We disable it here) + */ + cl->enableServerIdentity = FALSE; + } + + LOCK(cl->updateMutex); + + /* + * The modifiedRegion may overlap the destination copyRegion. We remove + * any overlapping bits from the copyRegion (since they'd only be + * overwritten anyway). + */ + + sraRgnSubtract(cl->copyRegion,cl->modifiedRegion); + + /* + * The client is interested in the region requestedRegion. The region + * which should be updated now is the intersection of requestedRegion + * and the union of modifiedRegion and copyRegion. If it's empty then + * no update is needed. + */ + + updateRegion = sraRgnCreateRgn(givenUpdateRegion); + if(cl->screen->progressiveSliceHeight>0) { + int height=cl->screen->progressiveSliceHeight, + y=cl->progressiveSliceY; + sraRegionPtr bbox=sraRgnBBox(updateRegion); + sraRect rect; + if(sraRgnPopRect(bbox,&rect,0)) { + sraRegionPtr slice; + if(y=rect.y2) + y=rect.y1; + slice=sraRgnCreateRect(0,y,cl->screen->width,y+height); + sraRgnAnd(updateRegion,slice); + sraRgnDestroy(slice); + } + sraRgnDestroy(bbox); + y+=height; + if(y>=cl->screen->height) + y=0; + cl->progressiveSliceY=y; + } + + sraRgnOr(updateRegion,cl->copyRegion); + if(!sraRgnAnd(updateRegion,cl->requestedRegion) && + sraRgnEmpty(updateRegion) && + (cl->enableCursorShapeUpdates || + (cl->cursorX == cl->screen->cursorX && cl->cursorY == cl->screen->cursorY)) && + !sendCursorShape && !sendCursorPos && !sendKeyboardLedState && + !sendSupportedMessages && !sendSupportedEncodings && !sendServerIdentity) { + sraRgnDestroy(updateRegion); + UNLOCK(cl->updateMutex); + if(cl->screen->displayFinishedHook) + cl->screen->displayFinishedHook(cl, TRUE); + return TRUE; + } + + /* + * We assume that the client doesn't have any pixel data outside the + * requestedRegion. In other words, both the source and destination of a + * copy must lie within requestedRegion. So the region we can send as a + * copy is the intersection of the copyRegion with both the requestedRegion + * and the requestedRegion translated by the amount of the copy. We set + * updateCopyRegion to this. + */ + + updateCopyRegion = sraRgnCreateRgn(cl->copyRegion); + sraRgnAnd(updateCopyRegion,cl->requestedRegion); + tmpRegion = sraRgnCreateRgn(cl->requestedRegion); + sraRgnOffset(tmpRegion,cl->copyDX,cl->copyDY); + sraRgnAnd(updateCopyRegion,tmpRegion); + sraRgnDestroy(tmpRegion); + dx = cl->copyDX; + dy = cl->copyDY; + + /* + * Next we remove updateCopyRegion from updateRegion so that updateRegion + * is the part of this update which is sent as ordinary pixel data (i.e not + * a copy). + */ + + sraRgnSubtract(updateRegion,updateCopyRegion); + + /* + * Finally we leave modifiedRegion to be the remainder (if any) of parts of + * the screen which are modified but outside the requestedRegion. We also + * empty both the requestedRegion and the copyRegion - note that we never + * carry over a copyRegion for a future update. + */ + + sraRgnOr(cl->modifiedRegion,cl->copyRegion); + sraRgnSubtract(cl->modifiedRegion,updateRegion); + sraRgnSubtract(cl->modifiedRegion,updateCopyRegion); + + sraRgnMakeEmpty(cl->requestedRegion); + sraRgnMakeEmpty(cl->copyRegion); + cl->copyDX = 0; + cl->copyDY = 0; + + UNLOCK(cl->updateMutex); + + if (!cl->enableCursorShapeUpdates) { + if(cl->cursorX != cl->screen->cursorX || cl->cursorY != cl->screen->cursorY) { + rfbRedrawAfterHideCursor(cl,updateRegion); + LOCK(cl->screen->cursorMutex); + cl->cursorX = cl->screen->cursorX; + cl->cursorY = cl->screen->cursorY; + UNLOCK(cl->screen->cursorMutex); + rfbRedrawAfterHideCursor(cl,updateRegion); + } + rfbShowCursor(cl); + } + + /* + * Now send the update. + */ + + rfbStatRecordMessageSent(cl, rfbFramebufferUpdate, 0, 0); + if (cl->preferredEncoding == rfbEncodingCoRRE) { + nUpdateRegionRects = 0; + + for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){ + int x = rect.x1; + int y = rect.y1; + int w = rect.x2 - x; + int h = rect.y2 - y; + int rectsPerRow, rows; + /* We need to count the number of rects in the scaled screen */ + if (cl->screen!=cl->scaledScreen) + rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate"); + rectsPerRow = (w-1)/cl->correMaxWidth+1; + rows = (h-1)/cl->correMaxHeight+1; + nUpdateRegionRects += rectsPerRow*rows; + } + sraRgnReleaseIterator(i); i=NULL; + } else if (cl->preferredEncoding == rfbEncodingUltra) { + nUpdateRegionRects = 0; + + for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){ + int x = rect.x1; + int y = rect.y1; + int w = rect.x2 - x; + int h = rect.y2 - y; + /* We need to count the number of rects in the scaled screen */ + if (cl->screen!=cl->scaledScreen) + rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate"); + nUpdateRegionRects += (((h-1) / (ULTRA_MAX_SIZE( w ) / w)) + 1); + } + sraRgnReleaseIterator(i); i=NULL; +#ifdef LIBVNCSERVER_HAVE_LIBZ + } else if (cl->preferredEncoding == rfbEncodingZlib) { + nUpdateRegionRects = 0; + + for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){ + int x = rect.x1; + int y = rect.y1; + int w = rect.x2 - x; + int h = rect.y2 - y; + /* We need to count the number of rects in the scaled screen */ + if (cl->screen!=cl->scaledScreen) + rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate"); + nUpdateRegionRects += (((h-1) / (ZLIB_MAX_SIZE( w ) / w)) + 1); + } + sraRgnReleaseIterator(i); i=NULL; +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + } else if (cl->preferredEncoding == rfbEncodingTight) { + nUpdateRegionRects = 0; + + for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){ + int x = rect.x1; + int y = rect.y1; + int w = rect.x2 - x; + int h = rect.y2 - y; + int n; + /* We need to count the number of rects in the scaled screen */ + if (cl->screen!=cl->scaledScreen) + rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate"); + n = rfbNumCodedRectsTight(cl, x, y, w, h); + if (n == 0) { + nUpdateRegionRects = 0xFFFF; + break; + } + nUpdateRegionRects += n; + } + sraRgnReleaseIterator(i); i=NULL; +#endif +#endif +#if defined(LIBVNCSERVER_HAVE_LIBJPEG) && defined(LIBVNCSERVER_HAVE_LIBPNG) + } else if (cl->preferredEncoding == rfbEncodingTightPng) { + nUpdateRegionRects = 0; + + for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){ + int x = rect.x1; + int y = rect.y1; + int w = rect.x2 - x; + int h = rect.y2 - y; + int n; + /* We need to count the number of rects in the scaled screen */ + if (cl->screen!=cl->scaledScreen) + rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate"); + n = rfbNumCodedRectsTight(cl, x, y, w, h); + if (n == 0) { + nUpdateRegionRects = 0xFFFF; + break; + } + nUpdateRegionRects += n; + } + sraRgnReleaseIterator(i); i=NULL; +#endif + } else { + nUpdateRegionRects = sraRgnCountRects(updateRegion); + } + + fu->type = rfbFramebufferUpdate; + if (nUpdateRegionRects != 0xFFFF) { + if(cl->screen->maxRectsPerUpdate>0 + /* CoRRE splits the screen into smaller squares */ + && cl->preferredEncoding != rfbEncodingCoRRE + /* Ultra encoding splits rectangles up into smaller chunks */ + && cl->preferredEncoding != rfbEncodingUltra +#ifdef LIBVNCSERVER_HAVE_LIBZ + /* Zlib encoding splits rectangles up into smaller chunks */ + && cl->preferredEncoding != rfbEncodingZlib +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + /* Tight encoding counts the rectangles differently */ + && cl->preferredEncoding != rfbEncodingTight +#endif +#endif +#ifdef LIBVNCSERVER_HAVE_LIBPNG + /* Tight encoding counts the rectangles differently */ + && cl->preferredEncoding != rfbEncodingTightPng +#endif + && nUpdateRegionRects>cl->screen->maxRectsPerUpdate) { + sraRegion* newUpdateRegion = sraRgnBBox(updateRegion); + sraRgnDestroy(updateRegion); + updateRegion = newUpdateRegion; + nUpdateRegionRects = sraRgnCountRects(updateRegion); + } + fu->nRects = Swap16IfLE((uint16_t)(sraRgnCountRects(updateCopyRegion) + + nUpdateRegionRects + + !!sendCursorShape + !!sendCursorPos + !!sendKeyboardLedState + + !!sendSupportedMessages + !!sendSupportedEncodings + !!sendServerIdentity)); + } else { + fu->nRects = 0xFFFF; + } + cl->ublen = sz_rfbFramebufferUpdateMsg; + + if (sendCursorShape) { + cl->cursorWasChanged = FALSE; + if (!rfbSendCursorShape(cl)) + goto updateFailed; + } + + if (sendCursorPos) { + cl->cursorWasMoved = FALSE; + if (!rfbSendCursorPos(cl)) + goto updateFailed; + } + + if (sendKeyboardLedState) { + if (!rfbSendKeyboardLedState(cl)) + goto updateFailed; + } + + if (sendSupportedMessages) { + if (!rfbSendSupportedMessages(cl)) + goto updateFailed; + } + if (sendSupportedEncodings) { + if (!rfbSendSupportedEncodings(cl)) + goto updateFailed; + } + if (sendServerIdentity) { + if (!rfbSendServerIdentity(cl)) + goto updateFailed; + } + + if (!sraRgnEmpty(updateCopyRegion)) { + if (!rfbSendCopyRegion(cl,updateCopyRegion,dx,dy)) + goto updateFailed; + } + + for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){ + int x = rect.x1; + int y = rect.y1; + int w = rect.x2 - x; + int h = rect.y2 - y; + + /* We need to count the number of rects in the scaled screen */ + if (cl->screen!=cl->scaledScreen) + rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate"); + + switch (cl->preferredEncoding) { + case -1: + case rfbEncodingRaw: + if (!rfbSendRectEncodingRaw(cl, x, y, w, h)) + goto updateFailed; + break; + case rfbEncodingRRE: + if (!rfbSendRectEncodingRRE(cl, x, y, w, h)) + goto updateFailed; + break; + case rfbEncodingCoRRE: + if (!rfbSendRectEncodingCoRRE(cl, x, y, w, h)) + goto updateFailed; + break; + case rfbEncodingHextile: + if (!rfbSendRectEncodingHextile(cl, x, y, w, h)) + goto updateFailed; + break; + case rfbEncodingUltra: + if (!rfbSendRectEncodingUltra(cl, x, y, w, h)) + goto updateFailed; + break; +#ifdef LIBVNCSERVER_HAVE_LIBZ + case rfbEncodingZlib: + if (!rfbSendRectEncodingZlib(cl, x, y, w, h)) + goto updateFailed; + break; + case rfbEncodingZRLE: + case rfbEncodingZYWRLE: + if (!rfbSendRectEncodingZRLE(cl, x, y, w, h)) + goto updateFailed; + break; +#endif +#if defined(LIBVNCSERVER_HAVE_LIBJPEG) && (defined(LIBVNCSERVER_HAVE_LIBZ) || defined(LIBVNCSERVER_HAVE_LIBPNG)) + case rfbEncodingTight: + if (!rfbSendRectEncodingTight(cl, x, y, w, h)) + goto updateFailed; + break; +#ifdef LIBVNCSERVER_HAVE_LIBPNG + case rfbEncodingTightPng: + if (!rfbSendRectEncodingTightPng(cl, x, y, w, h)) + goto updateFailed; + break; +#endif +#endif + } + } + if (i) { + sraRgnReleaseIterator(i); + i = NULL; + } + + if ( nUpdateRegionRects == 0xFFFF && + !rfbSendLastRectMarker(cl) ) + goto updateFailed; + + if (!rfbSendUpdateBuf(cl)) { +updateFailed: + result = FALSE; + } + + if (!cl->enableCursorShapeUpdates) { + rfbHideCursor(cl); + } + + if(i) + sraRgnReleaseIterator(i); + sraRgnDestroy(updateRegion); + sraRgnDestroy(updateCopyRegion); + + if(cl->screen->displayFinishedHook) + cl->screen->displayFinishedHook(cl, result); + return result; +} + + +/* + * Send the copy region as a string of CopyRect encoded rectangles. + * The only slightly tricky thing is that we should send the messages in + * the correct order so that an earlier CopyRect will not corrupt the source + * of a later one. + */ + +rfbBool +rfbSendCopyRegion(rfbClientPtr cl, + sraRegionPtr reg, + int dx, + int dy) +{ + int x, y, w, h; + rfbFramebufferUpdateRectHeader rect; + rfbCopyRect cr; + sraRectangleIterator* i; + sraRect rect1; + + /* printf("copyrect: "); sraRgnPrint(reg); putchar('\n');fflush(stdout); */ + i = sraRgnGetReverseIterator(reg,dx>0,dy>0); + + /* correct for the scale of the screen */ + dx = ScaleX(cl->screen, cl->scaledScreen, dx); + dy = ScaleX(cl->screen, cl->scaledScreen, dy); + + while(sraRgnIteratorNext(i,&rect1)) { + x = rect1.x1; + y = rect1.y1; + w = rect1.x2 - x; + h = rect1.y2 - y; + + /* correct for scaling (if necessary) */ + rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "copyrect"); + + rect.r.x = Swap16IfLE(x); + rect.r.y = Swap16IfLE(y); + rect.r.w = Swap16IfLE(w); + rect.r.h = Swap16IfLE(h); + rect.encoding = Swap32IfLE(rfbEncodingCopyRect); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + cr.srcX = Swap16IfLE(x - dx); + cr.srcY = Swap16IfLE(y - dy); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&cr, sz_rfbCopyRect); + cl->ublen += sz_rfbCopyRect; + + rfbStatRecordEncodingSent(cl, rfbEncodingCopyRect, sz_rfbFramebufferUpdateRectHeader + sz_rfbCopyRect, + w * h * (cl->scaledScreen->bitsPerPixel / 8)); + } + sraRgnReleaseIterator(i); + + return TRUE; +} + +/* + * Send a given rectangle in raw encoding (rfbEncodingRaw). + */ + +rfbBool +rfbSendRectEncodingRaw(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + rfbFramebufferUpdateRectHeader rect; + int nlines; + int bytesPerLine = w * (cl->format.bitsPerPixel / 8); + char *fbptr = (cl->scaledScreen->frameBuffer + (cl->scaledScreen->paddedWidthInBytes * y) + + (x * (cl->scaledScreen->bitsPerPixel / 8))); + + /* Flush the buffer to guarantee correct alignment for translateFn(). */ + if (cl->ublen > 0) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.r.x = Swap16IfLE(x); + rect.r.y = Swap16IfLE(y); + rect.r.w = Swap16IfLE(w); + rect.r.h = Swap16IfLE(h); + rect.encoding = Swap32IfLE(rfbEncodingRaw); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect,sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + + rfbStatRecordEncodingSent(cl, rfbEncodingRaw, sz_rfbFramebufferUpdateRectHeader + bytesPerLine * h, + sz_rfbFramebufferUpdateRectHeader + bytesPerLine * h); + + nlines = (UPDATE_BUF_SIZE - cl->ublen) / bytesPerLine; + + while (TRUE) { + if (nlines > h) + nlines = h; + + (*cl->translateFn)(cl->translateLookupTable, + &(cl->screen->serverFormat), + &cl->format, fbptr, &cl->updateBuf[cl->ublen], + cl->scaledScreen->paddedWidthInBytes, w, nlines); + + cl->ublen += nlines * bytesPerLine; + h -= nlines; + + if (h == 0) /* rect fitted in buffer, do next one */ + return TRUE; + + /* buffer full - flush partial rect and do another nlines */ + + if (!rfbSendUpdateBuf(cl)) + return FALSE; + + fbptr += (cl->scaledScreen->paddedWidthInBytes * nlines); + + nlines = (UPDATE_BUF_SIZE - cl->ublen) / bytesPerLine; + if (nlines == 0) { + rfbErr("rfbSendRectEncodingRaw: send buffer too small for %d " + "bytes per line\n", bytesPerLine); + rfbCloseClient(cl); + return FALSE; + } + } +} + + + +/* + * Send an empty rectangle with encoding field set to value of + * rfbEncodingLastRect to notify client that this is the last + * rectangle in framebuffer update ("LastRect" extension of RFB + * protocol). + */ + +rfbBool +rfbSendLastRectMarker(rfbClientPtr cl) +{ + rfbFramebufferUpdateRectHeader rect; + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.encoding = Swap32IfLE(rfbEncodingLastRect); + rect.r.x = 0; + rect.r.y = 0; + rect.r.w = 0; + rect.r.h = 0; + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect,sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + + rfbStatRecordEncodingSent(cl, rfbEncodingLastRect, sz_rfbFramebufferUpdateRectHeader, sz_rfbFramebufferUpdateRectHeader); + + return TRUE; +} + + +/* + * Send NewFBSize pseudo-rectangle. This tells the client to change + * its framebuffer size. + */ + +rfbBool +rfbSendNewFBSize(rfbClientPtr cl, + int w, + int h) +{ + rfbFramebufferUpdateRectHeader rect; + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + if (cl->PalmVNC==TRUE) + rfbLog("Sending rfbEncodingNewFBSize in response to a PalmVNC style framebuffer resize (%dx%d)\n", w, h); + else + rfbLog("Sending rfbEncodingNewFBSize for resize to (%dx%d)\n", w, h); + + rect.encoding = Swap32IfLE(rfbEncodingNewFBSize); + rect.r.x = 0; + rect.r.y = 0; + rect.r.w = Swap16IfLE(w); + rect.r.h = Swap16IfLE(h); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + rfbStatRecordEncodingSent(cl, rfbEncodingNewFBSize, sz_rfbFramebufferUpdateRectHeader, sz_rfbFramebufferUpdateRectHeader); + + return TRUE; +} + + +/* + * Send the contents of cl->updateBuf. Returns 1 if successful, -1 if + * not (errno should be set). + */ + +rfbBool +rfbSendUpdateBuf(rfbClientPtr cl) +{ + if(cl->sock<0) + return FALSE; + + if (rfbWriteExact(cl, cl->updateBuf, cl->ublen) < 0) { + rfbLogPerror("rfbSendUpdateBuf: write"); + rfbCloseClient(cl); + return FALSE; + } + + cl->ublen = 0; + return TRUE; +} + +/* + * rfbSendSetColourMapEntries sends a SetColourMapEntries message to the + * client, using values from the currently installed colormap. + */ + +rfbBool +rfbSendSetColourMapEntries(rfbClientPtr cl, + int firstColour, + int nColours) +{ + char buf[sz_rfbSetColourMapEntriesMsg + 256 * 3 * 2]; + char *wbuf = buf; + rfbSetColourMapEntriesMsg *scme; + uint16_t *rgb; + rfbColourMap* cm = &cl->screen->colourMap; + int i, len; + + if (nColours > 256) { + /* some rare hardware has, e.g., 4096 colors cells: PseudoColor:12 */ + wbuf = (char *) malloc(sz_rfbSetColourMapEntriesMsg + nColours * 3 * 2); + } + + scme = (rfbSetColourMapEntriesMsg *)wbuf; + rgb = (uint16_t *)(&wbuf[sz_rfbSetColourMapEntriesMsg]); + + scme->type = rfbSetColourMapEntries; + + scme->firstColour = Swap16IfLE(firstColour); + scme->nColours = Swap16IfLE(nColours); + + len = sz_rfbSetColourMapEntriesMsg; + + for (i = 0; i < nColours; i++) { + if(i<(int)cm->count) { + if(cm->is16) { + rgb[i*3] = Swap16IfLE(cm->data.shorts[i*3]); + rgb[i*3+1] = Swap16IfLE(cm->data.shorts[i*3+1]); + rgb[i*3+2] = Swap16IfLE(cm->data.shorts[i*3+2]); + } else { + rgb[i*3] = Swap16IfLE((unsigned short)cm->data.bytes[i*3]); + rgb[i*3+1] = Swap16IfLE((unsigned short)cm->data.bytes[i*3+1]); + rgb[i*3+2] = Swap16IfLE((unsigned short)cm->data.bytes[i*3+2]); + } + } + } + + len += nColours * 3 * 2; + + LOCK(cl->sendMutex); + if (rfbWriteExact(cl, wbuf, len) < 0) { + rfbLogPerror("rfbSendSetColourMapEntries: write"); + rfbCloseClient(cl); + if (wbuf != buf) free(wbuf); + UNLOCK(cl->sendMutex); + return FALSE; + } + UNLOCK(cl->sendMutex); + + rfbStatRecordMessageSent(cl, rfbSetColourMapEntries, len, len); + if (wbuf != buf) free(wbuf); + return TRUE; +} + +/* + * rfbSendBell sends a Bell message to all the clients. + */ + +void +rfbSendBell(rfbScreenInfoPtr rfbScreen) +{ + rfbClientIteratorPtr i; + rfbClientPtr cl; + rfbBellMsg b; + + i = rfbGetClientIterator(rfbScreen); + while((cl=rfbClientIteratorNext(i))) { + b.type = rfbBell; + LOCK(cl->sendMutex); + if (rfbWriteExact(cl, (char *)&b, sz_rfbBellMsg) < 0) { + rfbLogPerror("rfbSendBell: write"); + rfbCloseClient(cl); + } + UNLOCK(cl->sendMutex); + } + rfbStatRecordMessageSent(cl, rfbBell, sz_rfbBellMsg, sz_rfbBellMsg); + rfbReleaseClientIterator(i); +} + + +/* + * rfbSendServerCutText sends a ServerCutText message to all the clients. + */ + +void +rfbSendServerCutText(rfbScreenInfoPtr rfbScreen,char *str, int len) +{ + rfbClientPtr cl; + rfbServerCutTextMsg sct; + rfbClientIteratorPtr iterator; + + iterator = rfbGetClientIterator(rfbScreen); + while ((cl = rfbClientIteratorNext(iterator)) != NULL) { + sct.type = rfbServerCutText; + sct.length = Swap32IfLE(len); + LOCK(cl->sendMutex); + if (rfbWriteExact(cl, (char *)&sct, + sz_rfbServerCutTextMsg) < 0) { + rfbLogPerror("rfbSendServerCutText: write"); + rfbCloseClient(cl); + UNLOCK(cl->sendMutex); + continue; + } + if (rfbWriteExact(cl, str, len) < 0) { + rfbLogPerror("rfbSendServerCutText: write"); + rfbCloseClient(cl); + } + UNLOCK(cl->sendMutex); + rfbStatRecordMessageSent(cl, rfbServerCutText, sz_rfbServerCutTextMsg+len, sz_rfbServerCutTextMsg+len); + } + rfbReleaseClientIterator(iterator); +} + +/***************************************************************************** + * + * UDP can be used for keyboard and pointer events when the underlying + * network is highly reliable. This is really here to support ORL's + * videotile, whose TCP implementation doesn't like sending lots of small + * packets (such as 100s of pen readings per second!). + */ + +static unsigned char ptrAcceleration = 50; + +void +rfbNewUDPConnection(rfbScreenInfoPtr rfbScreen, + int sock) +{ + if (write(sock, (char*) &ptrAcceleration, 1) < 0) { + rfbLogPerror("rfbNewUDPConnection: write"); + } +} + +/* + * Because UDP is a message based service, we can't read the first byte and + * then the rest of the packet separately like we do with TCP. We will always + * get a whole packet delivered in one go, so we ask read() for the maximum + * number of bytes we can possibly get. + */ + +void +rfbProcessUDPInput(rfbScreenInfoPtr rfbScreen) +{ + int n; + rfbClientPtr cl=rfbScreen->udpClient; + rfbClientToServerMsg msg; + + if((!cl) || cl->onHold) + return; + + if ((n = read(rfbScreen->udpSock, (char *)&msg, sizeof(msg))) <= 0) { + if (n < 0) { + rfbLogPerror("rfbProcessUDPInput: read"); + } + rfbDisconnectUDPSock(rfbScreen); + return; + } + + switch (msg.type) { + + case rfbKeyEvent: + if (n != sz_rfbKeyEventMsg) { + rfbErr("rfbProcessUDPInput: key event incorrect length\n"); + rfbDisconnectUDPSock(rfbScreen); + return; + } + cl->screen->kbdAddEvent(msg.ke.down, (rfbKeySym)Swap32IfLE(msg.ke.key), cl); + break; + + case rfbPointerEvent: + if (n != sz_rfbPointerEventMsg) { + rfbErr("rfbProcessUDPInput: ptr event incorrect length\n"); + rfbDisconnectUDPSock(rfbScreen); + return; + } + cl->screen->ptrAddEvent(msg.pe.buttonMask, + Swap16IfLE(msg.pe.x), Swap16IfLE(msg.pe.y), cl); + break; + + default: + rfbErr("rfbProcessUDPInput: unknown message type %d\n", + msg.type); + rfbDisconnectUDPSock(rfbScreen); + } +} + + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl.h b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl.h new file mode 100644 index 0000000..f1c4792 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl.h @@ -0,0 +1,15 @@ +#ifndef _VNCSSL_H +#define _VNCSSL_H 1 + +#include "rfb/rfb.h" +#include "rfb/rfbconfig.h" + +int rfbssl_init(rfbClientPtr cl); +int rfbssl_pending(rfbClientPtr cl); +int rfbssl_peek(rfbClientPtr cl, char *buf, int bufsize); +int rfbssl_read(rfbClientPtr cl, char *buf, int bufsize); +int rfbssl_write(rfbClientPtr cl, const char *buf, int bufsize); +void rfbssl_destroy(rfbClientPtr cl); + + +#endif /* _VNCSSL_H */ diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl_gnutls.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl_gnutls.c new file mode 100644 index 0000000..cf60cdc --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl_gnutls.c @@ -0,0 +1,268 @@ +/* + * rfbssl_gnutls.c - Secure socket funtions (gnutls version) + */ + +/* + * Copyright (C) 2011 Gernot Tenchio + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include "rfbssl.h" +#include +#include + +struct rfbssl_ctx { + char peekbuf[2048]; + int peeklen; + int peekstart; + gnutls_session_t session; + gnutls_certificate_credentials_t x509_cred; + gnutls_dh_params_t dh_params; +#ifdef I_LIKE_RSA_PARAMS_THAT_MUCH + gnutls_rsa_params_t rsa_params; +#endif +}; + +void rfbssl_log_func(int level, const char *msg) +{ + rfbErr("SSL: %s", msg); +} + +static void rfbssl_error(const char *msg, int e) +{ + rfbErr("%s: %s (%ld)\n", msg, gnutls_strerror(e), e); +} + +static int rfbssl_init_session(struct rfbssl_ctx *ctx, int fd) +{ + gnutls_session_t session; + int ret; + + if (!GNUTLS_E_SUCCESS == (ret = gnutls_init(&session, GNUTLS_SERVER))) { + /* */ + } else if (!GNUTLS_E_SUCCESS == (ret = gnutls_priority_set_direct(session, "EXPORT", NULL))) { + /* */ + } else if (!GNUTLS_E_SUCCESS == (ret = gnutls_credentials_set(session, GNUTLS_CRD_CERTIFICATE, ctx->x509_cred))) { + /* */ + } else { + gnutls_session_enable_compatibility_mode(session); + gnutls_transport_set_ptr(session, (gnutls_transport_ptr_t)(uintptr_t)fd); + ctx->session = session; + } + return ret; +} + +static int generate_dh_params(struct rfbssl_ctx *ctx) +{ + int ret; + if (GNUTLS_E_SUCCESS == (ret = gnutls_dh_params_init(&ctx->dh_params))) + ret = gnutls_dh_params_generate2(ctx->dh_params, 1024); + return ret; +} + +#ifdef I_LIKE_RSA_PARAMS_THAT_MUCH +static int generate_rsa_params(struct rfbssl_ctx *ctx) +{ + int ret; + if (GNUTLS_E_SUCCESS == (ret = gnutls_rsa_params_init(&ctx->rsa_params))) + ret = gnutls_rsa_params_generate2(ctx->rsa_params, 512); + return ret; +} +#endif + +struct rfbssl_ctx *rfbssl_init_global(char *key, char *cert) +{ + int ret = GNUTLS_E_SUCCESS; + struct rfbssl_ctx *ctx = NULL; + + if (NULL == (ctx = malloc(sizeof(struct rfbssl_ctx)))) { + ret = GNUTLS_E_MEMORY_ERROR; + } else if (!GNUTLS_E_SUCCESS == (ret = gnutls_global_init())) { + /* */ + } else if (!GNUTLS_E_SUCCESS == (ret = gnutls_certificate_allocate_credentials(&ctx->x509_cred))) { + /* */ + } else if ((ret = gnutls_certificate_set_x509_trust_file(ctx->x509_cred, cert, GNUTLS_X509_FMT_PEM)) < 0) { + /* */ + } else if (!GNUTLS_E_SUCCESS == (ret = gnutls_certificate_set_x509_key_file(ctx->x509_cred, cert, key, GNUTLS_X509_FMT_PEM))) { + /* */ + } else if (!GNUTLS_E_SUCCESS == (ret = generate_dh_params(ctx))) { + /* */ +#ifdef I_LIKE_RSA_PARAMS_THAT_MUCH + } else if (!GNUTLS_E_SUCCESS == (ret = generate_rsa_params(ctx))) { + /* */ +#endif + } else { + gnutls_global_set_log_function(rfbssl_log_func); + gnutls_global_set_log_level(1); + gnutls_certificate_set_dh_params(ctx->x509_cred, ctx->dh_params); + return ctx; + } + + free(ctx); + return NULL; +} + +int rfbssl_init(rfbClientPtr cl) +{ + int ret = -1; + struct rfbssl_ctx *ctx; + char *keyfile; + if (!(keyfile = cl->screen->sslkeyfile)) + keyfile = cl->screen->sslcertfile; + + if (NULL == (ctx = rfbssl_init_global(keyfile, cl->screen->sslcertfile))) { + /* */ + } else if (GNUTLS_E_SUCCESS != (ret = rfbssl_init_session(ctx, cl->sock))) { + /* */ + } else { + while (GNUTLS_E_SUCCESS != (ret = gnutls_handshake(ctx->session))) { + if (ret == GNUTLS_E_AGAIN) + continue; + break; + } + } + + if (ret != GNUTLS_E_SUCCESS) { + rfbssl_error(__func__, ret); + } else { + cl->sslctx = (rfbSslCtx *)ctx; + rfbLog("%s protocol initialized\n", gnutls_protocol_get_name(gnutls_protocol_get_version(ctx->session))); + } + return ret; +} + +static int rfbssl_do_read(rfbClientPtr cl, char *buf, int bufsize) +{ + struct rfbssl_ctx *ctx = (struct rfbssl_ctx *)cl->sslctx; + int ret; + + while ((ret = gnutls_record_recv(ctx->session, buf, bufsize)) < 0) { + if (ret == GNUTLS_E_AGAIN) { + /* continue */ + } else if (ret == GNUTLS_E_INTERRUPTED) { + /* continue */ + } else { + break; + } + } + + if (ret < 0) { + rfbssl_error(__func__, ret); + errno = EIO; + ret = -1; + } + + return ret < 0 ? -1 : ret; +} + +int rfbssl_write(rfbClientPtr cl, const char *buf, int bufsize) +{ + struct rfbssl_ctx *ctx = (struct rfbssl_ctx *)cl->sslctx; + int ret; + + while ((ret = gnutls_record_send(ctx->session, buf, bufsize)) < 0) { + if (ret == GNUTLS_E_AGAIN) { + /* continue */ + } else if (ret == GNUTLS_E_INTERRUPTED) { + /* continue */ + } else { + break; + } + } + + if (ret < 0) + rfbssl_error(__func__, ret); + + return ret; +} + +static void rfbssl_gc_peekbuf(struct rfbssl_ctx *ctx, int bufsize) +{ + if (ctx->peekstart) { + int spaceleft = sizeof(ctx->peekbuf) - ctx->peeklen - ctx->peekstart; + if (spaceleft < bufsize) { + memmove(ctx->peekbuf, ctx->peekbuf + ctx->peekstart, ctx->peeklen); + ctx->peekstart = 0; + } + } +} + +static int __rfbssl_read(rfbClientPtr cl, char *buf, int bufsize, int peek) +{ + int ret = 0; + struct rfbssl_ctx *ctx = (struct rfbssl_ctx *)cl->sslctx; + + rfbssl_gc_peekbuf(ctx, bufsize); + + if (ctx->peeklen) { + /* If we have any peek data, simply return that. */ + ret = bufsize < ctx->peeklen ? bufsize : ctx->peeklen; + memcpy (buf, ctx->peekbuf + ctx->peekstart, ret); + if (!peek) { + ctx->peeklen -= ret; + if (ctx->peeklen != 0) + ctx->peekstart += ret; + else + ctx->peekstart = 0; + } + } + + if (ret < bufsize) { + int n; + /* read the remaining data */ + if ((n = rfbssl_do_read(cl, buf + ret, bufsize - ret)) <= 0) { + rfbErr("rfbssl_%s: %s error\n", __func__, peek ? "peek" : "read"); + return n; + } + if (peek) { + memcpy(ctx->peekbuf + ctx->peekstart + ctx->peeklen, buf + ret, n); + ctx->peeklen += n; + } + ret += n; + } + + return ret; +} + +int rfbssl_read(rfbClientPtr cl, char *buf, int bufsize) +{ + return __rfbssl_read(cl, buf, bufsize, 0); +} + +int rfbssl_peek(rfbClientPtr cl, char *buf, int bufsize) +{ + return __rfbssl_read(cl, buf, bufsize, 1); +} + +int rfbssl_pending(rfbClientPtr cl) +{ + struct rfbssl_ctx *ctx = (struct rfbssl_ctx *)cl->sslctx; + int ret = ctx->peeklen; + + if (ret <= 0) + ret = gnutls_record_check_pending(ctx->session); + + return ret; +} + +void rfbssl_destroy(rfbClientPtr cl) +{ + struct rfbssl_ctx *ctx = (struct rfbssl_ctx *)cl->sslctx; + gnutls_bye(ctx->session, GNUTLS_SHUT_WR); + gnutls_deinit(ctx->session); + gnutls_certificate_free_credentials(ctx->x509_cred); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl_none.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl_none.c new file mode 100644 index 0000000..488a6f4 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl_none.c @@ -0,0 +1,58 @@ +/* + * rfbssl_none.c - Secure socket functions (fallback to failing) + */ + +/* + * Copyright (C) 2011 Johannes Schindelin + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include "rfbssl.h" + +struct rfbssl_ctx *rfbssl_init_global(char *key, char *cert) +{ + return NULL; +} + +int rfbssl_init(rfbClientPtr cl) +{ + return -1; +} + +int rfbssl_write(rfbClientPtr cl, const char *buf, int bufsize) +{ + return -1; +} + +int rfbssl_peek(rfbClientPtr cl, char *buf, int bufsize) +{ + return -1; +} + +int rfbssl_read(rfbClientPtr cl, char *buf, int bufsize) +{ + return -1; +} + +int rfbssl_pending(rfbClientPtr cl) +{ + return -1; +} + +void rfbssl_destroy(rfbClientPtr cl) +{ +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl_openssl.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl_openssl.c new file mode 100644 index 0000000..cbd6865 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rfbssl_openssl.c @@ -0,0 +1,135 @@ +/* + * rfbssl_openssl.c - Secure socket funtions (openssl version) + */ + +/* + * Copyright (C) 2011 Gernot Tenchio + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include "rfbssl.h" +#include +#include + +struct rfbssl_ctx { + SSL_CTX *ssl_ctx; + SSL *ssl; +}; + +static void rfbssl_error(void) +{ + char buf[1024]; + unsigned long e = ERR_get_error(); + rfbErr("%s (%ld)\n", ERR_error_string(e, buf), e); +} + +int rfbssl_init(rfbClientPtr cl) +{ + char *keyfile; + int r, ret = -1; + struct rfbssl_ctx *ctx; + + SSL_library_init(); + SSL_load_error_strings(); + + if (cl->screen->sslkeyfile && *cl->screen->sslkeyfile) { + keyfile = cl->screen->sslkeyfile; + } else { + keyfile = cl->screen->sslcertfile; + } + + if (NULL == (ctx = malloc(sizeof(struct rfbssl_ctx)))) { + rfbErr("OOM\n"); + } else if (!cl->screen->sslcertfile || !cl->screen->sslcertfile[0]) { + rfbErr("SSL connection but no cert specified\n"); + } else if (NULL == (ctx->ssl_ctx = SSL_CTX_new(TLSv1_server_method()))) { + rfbssl_error(); + } else if (SSL_CTX_use_PrivateKey_file(ctx->ssl_ctx, keyfile, SSL_FILETYPE_PEM) <= 0) { + rfbErr("Unable to load private key file %s\n", keyfile); + } else if (SSL_CTX_use_certificate_file(ctx->ssl_ctx, cl->screen->sslcertfile, SSL_FILETYPE_PEM) <= 0) { + rfbErr("Unable to load certificate file %s\n", cl->screen->sslcertfile); + } else if (NULL == (ctx->ssl = SSL_new(ctx->ssl_ctx))) { + rfbErr("SSL_new failed\n"); + rfbssl_error(); + } else if (!(SSL_set_fd(ctx->ssl, cl->sock))) { + rfbErr("SSL_set_fd failed\n"); + rfbssl_error(); + } else { + while ((r = SSL_accept(ctx->ssl)) < 0) { + if (SSL_get_error(ctx->ssl, r) != SSL_ERROR_WANT_READ) + break; + } + if (r < 0) { + rfbErr("SSL_accept failed %d\n", SSL_get_error(ctx->ssl, r)); + } else { + cl->sslctx = (rfbSslCtx *)ctx; + ret = 0; + } + } + return ret; +} + +int rfbssl_write(rfbClientPtr cl, const char *buf, int bufsize) +{ + int ret; + struct rfbssl_ctx *ctx = (struct rfbssl_ctx *)cl->sslctx; + + while ((ret = SSL_write(ctx->ssl, buf, bufsize)) <= 0) { + if (SSL_get_error(ctx->ssl, ret) != SSL_ERROR_WANT_WRITE) + break; + } + return ret; +} + +int rfbssl_peek(rfbClientPtr cl, char *buf, int bufsize) +{ + int ret; + struct rfbssl_ctx *ctx = (struct rfbssl_ctx *)cl->sslctx; + + while ((ret = SSL_peek(ctx->ssl, buf, bufsize)) <= 0) { + if (SSL_get_error(ctx->ssl, ret) != SSL_ERROR_WANT_READ) + break; + } + return ret; +} + +int rfbssl_read(rfbClientPtr cl, char *buf, int bufsize) +{ + int ret; + struct rfbssl_ctx *ctx = (struct rfbssl_ctx *)cl->sslctx; + + while ((ret = SSL_read(ctx->ssl, buf, bufsize)) <= 0) { + if (SSL_get_error(ctx->ssl, ret) != SSL_ERROR_WANT_READ) + break; + } + return ret; +} + +int rfbssl_pending(rfbClientPtr cl) +{ + struct rfbssl_ctx *ctx = (struct rfbssl_ctx *)cl->sslctx; + return SSL_pending(ctx->ssl); +} + +void rfbssl_destroy(rfbClientPtr cl) +{ + struct rfbssl_ctx *ctx = (struct rfbssl_ctx *)cl->sslctx; + if (ctx->ssl) + SSL_free(ctx->ssl); + if (ctx->ssl_ctx) + SSL_CTX_free(ctx->ssl_ctx); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/rre.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rre.c new file mode 100644 index 0000000..2103153 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/rre.c @@ -0,0 +1,309 @@ +/* + * rre.c + * + * Routines to implement Rise-and-Run-length Encoding (RRE). This + * code is based on krw's original javatel rfbserver. + */ + +/* + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include + +/* + * cl->beforeEncBuf contains pixel data in the client's format. + * cl->afterEncBuf contains the RRE encoded version. If the RRE encoded version is + * larger than the raw data or if it exceeds cl->afterEncBufSize then + * raw encoding is used instead. + */ + +static int subrectEncode8(rfbClientPtr cl, uint8_t *data, int w, int h); +static int subrectEncode16(rfbClientPtr cl, uint16_t *data, int w, int h); +static int subrectEncode32(rfbClientPtr cl, uint32_t *data, int w, int h); +static uint32_t getBgColour(char *data, int size, int bpp); + + +/* + * rfbSendRectEncodingRRE - send a given rectangle using RRE encoding. + */ + +rfbBool +rfbSendRectEncodingRRE(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + rfbFramebufferUpdateRectHeader rect; + rfbRREHeader hdr; + int nSubrects; + int i; + char *fbptr = (cl->scaledScreen->frameBuffer + (cl->scaledScreen->paddedWidthInBytes * y) + + (x * (cl->scaledScreen->bitsPerPixel / 8))); + + int maxRawSize = (cl->scaledScreen->width * cl->scaledScreen->height + * (cl->format.bitsPerPixel / 8)); + + if (cl->beforeEncBufSize < maxRawSize) { + cl->beforeEncBufSize = maxRawSize; + if (cl->beforeEncBuf == NULL) + cl->beforeEncBuf = (char *)malloc(cl->beforeEncBufSize); + else + cl->beforeEncBuf = (char *)realloc(cl->beforeEncBuf, cl->beforeEncBufSize); + } + + if (cl->afterEncBufSize < maxRawSize) { + cl->afterEncBufSize = maxRawSize; + if (cl->afterEncBuf == NULL) + cl->afterEncBuf = (char *)malloc(cl->afterEncBufSize); + else + cl->afterEncBuf = (char *)realloc(cl->afterEncBuf, cl->afterEncBufSize); + } + + (*cl->translateFn)(cl->translateLookupTable, + &(cl->screen->serverFormat), + &cl->format, fbptr, cl->beforeEncBuf, + cl->scaledScreen->paddedWidthInBytes, w, h); + + switch (cl->format.bitsPerPixel) { + case 8: + nSubrects = subrectEncode8(cl, (uint8_t *)cl->beforeEncBuf, w, h); + break; + case 16: + nSubrects = subrectEncode16(cl, (uint16_t *)cl->beforeEncBuf, w, h); + break; + case 32: + nSubrects = subrectEncode32(cl, (uint32_t *)cl->beforeEncBuf, w, h); + break; + default: + rfbLog("getBgColour: bpp %d?\n",cl->format.bitsPerPixel); + return FALSE; + } + + if (nSubrects < 0) { + + /* RRE encoding was too large, use raw */ + + return rfbSendRectEncodingRaw(cl, x, y, w, h); + } + + rfbStatRecordEncodingSent(cl, rfbEncodingRRE, + sz_rfbFramebufferUpdateRectHeader + sz_rfbRREHeader + cl->afterEncBufLen, + sz_rfbFramebufferUpdateRectHeader + w * h * (cl->format.bitsPerPixel / 8)); + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader + sz_rfbRREHeader + > UPDATE_BUF_SIZE) + { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.r.x = Swap16IfLE(x); + rect.r.y = Swap16IfLE(y); + rect.r.w = Swap16IfLE(w); + rect.r.h = Swap16IfLE(h); + rect.encoding = Swap32IfLE(rfbEncodingRRE); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + hdr.nSubrects = Swap32IfLE(nSubrects); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&hdr, sz_rfbRREHeader); + cl->ublen += sz_rfbRREHeader; + + for (i = 0; i < cl->afterEncBufLen;) { + + int bytesToCopy = UPDATE_BUF_SIZE - cl->ublen; + + if (i + bytesToCopy > cl->afterEncBufLen) { + bytesToCopy = cl->afterEncBufLen - i; + } + + memcpy(&cl->updateBuf[cl->ublen], &cl->afterEncBuf[i], bytesToCopy); + + cl->ublen += bytesToCopy; + i += bytesToCopy; + + if (cl->ublen == UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + } + + return TRUE; +} + + + +/* + * subrectEncode() encodes the given multicoloured rectangle as a background + * colour overwritten by single-coloured rectangles. It returns the number + * of subrectangles in the encoded buffer, or -1 if subrect encoding won't + * fit in the buffer. It puts the encoded rectangles in cl->afterEncBuf. The + * single-colour rectangle partition is not optimal, but does find the biggest + * horizontal or vertical rectangle top-left anchored to each consecutive + * coordinate position. + * + * The coding scheme is simply [...] where each + * is []. + */ + +#define DEFINE_SUBRECT_ENCODE(bpp) \ +static int \ + subrectEncode##bpp(rfbClientPtr client, uint##bpp##_t *data, int w, int h) { \ + uint##bpp##_t cl; \ + rfbRectangle subrect; \ + int x,y; \ + int i,j; \ + int hx=0,hy,vx=0,vy; \ + int hyflag; \ + uint##bpp##_t *seg; \ + uint##bpp##_t *line; \ + int hw,hh,vw,vh; \ + int thex,they,thew,theh; \ + int numsubs = 0; \ + int newLen; \ + uint##bpp##_t bg = (uint##bpp##_t)getBgColour((char*)data,w*h,bpp); \ + \ + *((uint##bpp##_t*)client->afterEncBuf) = bg; \ + \ + client->afterEncBufLen = (bpp/8); \ + \ + for (y=0; y 0) && (i >= hx)) {hy += 1;} else {hyflag = 0;} \ + } \ + vy = j-1; \ + \ + /* We now have two possible subrects: (x,y,hx,hy) and (x,y,vx,vy) \ + * We'll choose the bigger of the two. \ + */ \ + hw = hx-x+1; \ + hh = hy-y+1; \ + vw = vx-x+1; \ + vh = vy-y+1; \ + \ + thex = x; \ + they = y; \ + \ + if ((hw*hh) > (vw*vh)) { \ + thew = hw; \ + theh = hh; \ + } else { \ + thew = vw; \ + theh = vh; \ + } \ + \ + subrect.x = Swap16IfLE(thex); \ + subrect.y = Swap16IfLE(they); \ + subrect.w = Swap16IfLE(thew); \ + subrect.h = Swap16IfLE(theh); \ + \ + newLen = client->afterEncBufLen + (bpp/8) + sz_rfbRectangle; \ + if ((newLen > (w * h * (bpp/8))) || (newLen > client->afterEncBufSize)) \ + return -1; \ + \ + numsubs += 1; \ + *((uint##bpp##_t*)(client->afterEncBuf + client->afterEncBufLen)) = cl; \ + client->afterEncBufLen += (bpp/8); \ + memcpy(&client->afterEncBuf[client->afterEncBufLen],&subrect,sz_rfbRectangle); \ + client->afterEncBufLen += sz_rfbRectangle; \ + \ + /* \ + * Now mark the subrect as done. \ + */ \ + for (j=they; j < (they+theh); j++) { \ + for (i=thex; i < (thex+thew); i++) { \ + data[j*w+i] = bg; \ + } \ + } \ + } \ + } \ + } \ + \ + return numsubs; \ +} + +DEFINE_SUBRECT_ENCODE(8) +DEFINE_SUBRECT_ENCODE(16) +DEFINE_SUBRECT_ENCODE(32) + + +/* + * getBgColour() gets the most prevalent colour in a byte array. + */ +static uint32_t +getBgColour(char *data, int size, int bpp) +{ + +#define NUMCLRS 256 + + static int counts[NUMCLRS]; + int i,j,k; + + int maxcount = 0; + uint8_t maxclr = 0; + + if (bpp != 8) { + if (bpp == 16) { + return ((uint16_t *)data)[0]; + } else if (bpp == 32) { + return ((uint32_t *)data)[0]; + } else { + rfbLog("getBgColour: bpp %d?\n",bpp); + return 0; + } + } + + for (i=0; i= NUMCLRS) { + rfbErr("getBgColour: unusual colour = %d\n", k); + return 0; + } + counts[k] += 1; + if (counts[k] > maxcount) { + maxcount = counts[k]; + maxclr = ((uint8_t *)data)[j]; + } + } + + return maxclr; +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/scale.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/scale.c new file mode 100644 index 0000000..6f91391 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/scale.c @@ -0,0 +1,416 @@ +/* + * scale.c - deal with server-side scaling. + */ + +/* + * Copyright (C) 2005 Rohit Kumar, Johannes E. Schindelin + * Copyright (C) 2002 RealVNC Ltd. + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#ifdef __STRICT_ANSI__ +#define _BSD_SOURCE +#endif +#include +#include +#include +#include "private.h" + +#ifdef LIBVNCSERVER_HAVE_FCNTL_H +#include +#endif + +#ifdef WIN32 +#define write(sock,buf,len) send(sock,buf,len,0) +#else +#ifdef LIBVNCSERVER_HAVE_UNISTD_H +#include +#endif +#include +#ifdef LIBVNCSERVER_HAVE_SYS_SOCKET_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_NETINET_IN_H +#include +#include +#include +#endif +#endif + +#ifdef DEBUGPROTO +#undef DEBUGPROTO +#define DEBUGPROTO(x) x +#else +#define DEBUGPROTO(x) +#endif + +/****************************/ +#define CEIL(x) ( (double) ((int) (x)) == (x) ? \ + (double) ((int) (x)) : (double) ((int) (x) + 1) ) +#define FLOOR(x) ( (double) ((int) (x)) ) + + +int ScaleX(rfbScreenInfoPtr from, rfbScreenInfoPtr to, int x) +{ + if ((from==to) || (from==NULL) || (to==NULL)) return x; + return ((int)(((double) x / (double)from->width) * (double)to->width )); +} + +int ScaleY(rfbScreenInfoPtr from, rfbScreenInfoPtr to, int y) +{ + if ((from==to) || (from==NULL) || (to==NULL)) return y; + return ((int)(((double) y / (double)from->height) * (double)to->height )); +} + +/* So, all of the encodings point to the ->screen->frameBuffer, + * We need to change this! + */ +void rfbScaledCorrection(rfbScreenInfoPtr from, rfbScreenInfoPtr to, int *x, int *y, int *w, int *h, const char *function) +{ + double x1,y1,w1,h1, x2, y2, w2, h2; + double scaleW = ((double) to->width) / ((double) from->width); + double scaleH = ((double) to->height) / ((double) from->height); + + + /* + * rfbLog("rfbScaledCorrection(%p -> %p, %dx%d->%dx%d (%dXx%dY-%dWx%dH)\n", + * from, to, from->width, from->height, to->width, to->height, *x, *y, *w, *h); + */ + + /* If it's the original framebuffer... */ + if (from==to) return; + + x1 = ((double) *x) * scaleW; + y1 = ((double) *y) * scaleH; + w1 = ((double) *w) * scaleW; + h1 = ((double) *h) * scaleH; + + + /*cast from double to int is same as "*x = floor(x1);" */ + x2 = FLOOR(x1); + y2 = FLOOR(y1); + + /* include into W and H the jitter of scaling X and Y */ + w2 = CEIL(w1 + ( x1 - x2 )); + h2 = CEIL(h1 + ( y1 - y2 )); + + /* + * rfbLog("%s (%dXx%dY-%dWx%dH -> %fXx%fY-%fWx%fH) {%dWx%dH -> %dWx%dH}\n", + * function, *x, *y, *w, *h, x2, y2, w2, h2, + * from->width, from->height, to->width, to->height); + */ + + /* simulate ceil() without math library */ + *x = (int)x2; + *y = (int)y2; + *w = (int)w2; + *h = (int)h2; + + /* Small changes for a thumbnail may be scaled to zero */ + if (*w==0) (*w)++; + if (*h==0) (*h)++; + /* scaling from small to big may overstep the size a bit */ + if (*x+*w > to->width) *w=to->width - *x; + if (*y+*h > to->height) *h=to->height - *y; +} + +void rfbScaledScreenUpdateRect(rfbScreenInfoPtr screen, rfbScreenInfoPtr ptr, int x0, int y0, int w0, int h0) +{ + int x,y,w,v,z; + int x1, y1, w1, h1; + int bitsPerPixel, bytesPerPixel, bytesPerLine, areaX, areaY, area2; + unsigned char *srcptr, *dstptr; + + /* Nothing to do!!! */ + if (screen==ptr) return; + + x1 = x0; + y1 = y0; + w1 = w0; + h1 = h0; + + rfbScaledCorrection(screen, ptr, &x1, &y1, &w1, &h1, "rfbScaledScreenUpdateRect"); + x0 = ScaleX(ptr, screen, x1); + y0 = ScaleY(ptr, screen, y1); + w0 = ScaleX(ptr, screen, w1); + h0 = ScaleY(ptr, screen, h1); + + bitsPerPixel = screen->bitsPerPixel; + bytesPerPixel = bitsPerPixel / 8; + bytesPerLine = w1 * bytesPerPixel; + srcptr = (unsigned char *)(screen->frameBuffer + + (y0 * screen->paddedWidthInBytes + x0 * bytesPerPixel)); + dstptr = (unsigned char *)(ptr->frameBuffer + + ( y1 * ptr->paddedWidthInBytes + x1 * bytesPerPixel)); + /* The area of the source framebuffer for each destination pixel */ + areaX = ScaleX(ptr,screen,1); + areaY = ScaleY(ptr,screen,1); + area2 = areaX*areaY; + + + /* Ensure that we do not go out of bounds */ + if ((x1+w1) > (ptr->width)) + { + if (x1==0) w1=ptr->width; else x1 = ptr->width - w1; + } + if ((y1+h1) > (ptr->height)) + { + if (y1==0) h1=ptr->height; else y1 = ptr->height - h1; + } + /* + * rfbLog("rfbScaledScreenUpdateRect(%dXx%dY-%dWx%dH -> %dXx%dY-%dWx%dH <%dx%d>) {%dWx%dH -> %dWx%dH} 0x%p\n", + * x0, y0, w0, h0, x1, y1, w1, h1, areaX, areaY, + * screen->width, screen->height, ptr->width, ptr->height, ptr->frameBuffer); + */ + + if (screen->serverFormat.trueColour) { /* Blend neighbouring pixels together */ + unsigned char *srcptr2; + unsigned long pixel_value, red, green, blue; + unsigned int redShift = screen->serverFormat.redShift; + unsigned int greenShift = screen->serverFormat.greenShift; + unsigned int blueShift = screen->serverFormat.blueShift; + unsigned long redMax = screen->serverFormat.redMax; + unsigned long greenMax = screen->serverFormat.greenMax; + unsigned long blueMax = screen->serverFormat.blueMax; + + /* for each *destination* pixel... */ + for (y = 0; y < h1; y++) { + for (x = 0; x < w1; x++) { + red = green = blue = 0; + /* Get the totals for rgb from the source grid... */ + for (w = 0; w < areaX; w++) { + for (v = 0; v < areaY; v++) { + srcptr2 = &srcptr[(((x * areaX) + w) * bytesPerPixel) + + (v * screen->paddedWidthInBytes)]; + pixel_value = 0; + + + switch (bytesPerPixel) { + case 4: pixel_value = *((unsigned int *)srcptr2); break; + case 2: pixel_value = *((unsigned short *)srcptr2); break; + case 1: pixel_value = *((unsigned char *)srcptr2); break; + default: + /* fixme: endianess problem? */ + for (z = 0; z < bytesPerPixel; z++) + pixel_value += (srcptr2[z] << (8 * z)); + break; + } + /* + srcptr2 += bytesPerPixel; + */ + + red += ((pixel_value >> redShift) & redMax); + green += ((pixel_value >> greenShift) & greenMax); + blue += ((pixel_value >> blueShift) & blueMax); + + } + } + /* We now have a total for all of the colors, find the average! */ + red /= area2; + green /= area2; + blue /= area2; + /* Stuff the new value back into memory */ + pixel_value = ((red & redMax) << redShift) | ((green & greenMax) << greenShift) | ((blue & blueMax) << blueShift); + + switch (bytesPerPixel) { + case 4: *((unsigned int *)dstptr) = (unsigned int) pixel_value; break; + case 2: *((unsigned short *)dstptr) = (unsigned short) pixel_value; break; + case 1: *((unsigned char *)dstptr) = (unsigned char) pixel_value; break; + default: + /* fixme: endianess problem? */ + for (z = 0; z < bytesPerPixel; z++) + dstptr[z]=(pixel_value >> (8 * z)) & 0xff; + break; + } + dstptr += bytesPerPixel; + } + srcptr += (screen->paddedWidthInBytes * areaY); + dstptr += (ptr->paddedWidthInBytes - bytesPerLine); + } + } else + { /* Not truecolour, so we can't blend. Just use the top-left pixel instead */ + for (y = y1; y < (y1+h1); y++) { + for (x = x1; x < (x1+w1); x++) + memcpy (&ptr->frameBuffer[(y *ptr->paddedWidthInBytes) + (x * bytesPerPixel)], + &screen->frameBuffer[(y * areaY * screen->paddedWidthInBytes) + (x *areaX * bytesPerPixel)], bytesPerPixel); + } + } +} + +void rfbScaledScreenUpdate(rfbScreenInfoPtr screen, int x1, int y1, int x2, int y2) +{ + /* ok, now the task is to update each and every scaled version of the framebuffer + * and we only have to do this for this specific changed rectangle! + */ + rfbScreenInfoPtr ptr; + int count=0; + + /* We don't point to cl->screen as it is the original */ + for (ptr=screen->scaledScreenNext;ptr!=NULL;ptr=ptr->scaledScreenNext) + { + /* Only update if it has active clients... */ + if (ptr->scaledScreenRefCount>0) + { + rfbScaledScreenUpdateRect(screen, ptr, x1, y1, x2-x1, y2-y1); + count++; + } + } +} + +/* Create a new scaled version of the framebuffer */ +rfbScreenInfoPtr rfbScaledScreenAllocate(rfbClientPtr cl, int width, int height) +{ + rfbScreenInfoPtr ptr; + ptr = malloc(sizeof(rfbScreenInfo)); + if (ptr!=NULL) + { + /* copy *everything* (we don't use most of it, but just in case) */ + memcpy(ptr, cl->screen, sizeof(rfbScreenInfo)); + ptr->width = width; + ptr->height = height; + ptr->paddedWidthInBytes = (ptr->bitsPerPixel/8)*ptr->width; + + /* Need to by multiples of 4 for Sparc systems */ + ptr->paddedWidthInBytes += (ptr->paddedWidthInBytes % 4); + + /* Reset the reference count to 0! */ + ptr->scaledScreenRefCount = 0; + + ptr->sizeInBytes = ptr->paddedWidthInBytes * ptr->height; + ptr->serverFormat = cl->screen->serverFormat; + + ptr->frameBuffer = malloc(ptr->sizeInBytes); + if (ptr->frameBuffer!=NULL) + { + /* Reset to a known condition: scale the entire framebuffer */ + rfbScaledScreenUpdateRect(cl->screen, ptr, 0, 0, cl->screen->width, cl->screen->height); + /* Now, insert into the chain */ + LOCK(cl->updateMutex); + ptr->scaledScreenNext = cl->screen->scaledScreenNext; + cl->screen->scaledScreenNext = ptr; + UNLOCK(cl->updateMutex); + } + else + { + /* Failed to malloc the new frameBuffer, cleanup */ + free(ptr); + ptr=NULL; + } + } + return ptr; +} + +/* Find an active scaled version of the framebuffer + * TODO: implement a refcount per scaled screen to prevent + * unreferenced scaled screens from hanging around + */ +rfbScreenInfoPtr rfbScalingFind(rfbClientPtr cl, int width, int height) +{ + rfbScreenInfoPtr ptr; + /* include the original in the search (ie: fine 1:1 scaled version of the frameBuffer) */ + for (ptr=cl->screen; ptr!=NULL; ptr=ptr->scaledScreenNext) + { + if ((ptr->width==width) && (ptr->height==height)) + return ptr; + } + return NULL; +} + +/* Future needs "scale to 320x240, as that's the client's screen size */ +void rfbScalingSetup(rfbClientPtr cl, int width, int height) +{ + rfbScreenInfoPtr ptr; + + ptr = rfbScalingFind(cl,width,height); + if (ptr==NULL) + ptr = rfbScaledScreenAllocate(cl,width,height); + /* Now, there is a new screen available (if ptr is not NULL) */ + if (ptr!=NULL) + { + /* Update it! */ + if (ptr->scaledScreenRefCount<1) + rfbScaledScreenUpdateRect(cl->screen, ptr, 0, 0, cl->screen->width, cl->screen->height); + /* + * rfbLog("Taking one from %dx%d-%d and adding it to %dx%d-%d\n", + * cl->scaledScreen->width, cl->scaledScreen->height, + * cl->scaledScreen->scaledScreenRefCount, + * ptr->width, ptr->height, ptr->scaledScreenRefCount); + */ + + LOCK(cl->updateMutex); + cl->scaledScreen->scaledScreenRefCount--; + ptr->scaledScreenRefCount++; + cl->scaledScreen=ptr; + cl->newFBSizePending = TRUE; + UNLOCK(cl->updateMutex); + + rfbLog("Scaling to %dx%d (refcount=%d)\n",width,height,ptr->scaledScreenRefCount); + } + else + rfbLog("Scaling to %dx%d failed, leaving things alone\n",width,height); +} + +int rfbSendNewScaleSize(rfbClientPtr cl) +{ + /* if the client supports newFBsize Encoding, use it */ + if (cl->useNewFBSize && cl->newFBSizePending) + return FALSE; + + LOCK(cl->updateMutex); + cl->newFBSizePending = FALSE; + UNLOCK(cl->updateMutex); + + if (cl->PalmVNC==TRUE) + { + rfbPalmVNCReSizeFrameBufferMsg pmsg; + pmsg.type = rfbPalmVNCReSizeFrameBuffer; + pmsg.pad1 = 0; + pmsg.desktop_w = Swap16IfLE(cl->screen->width); + pmsg.desktop_h = Swap16IfLE(cl->screen->height); + pmsg.buffer_w = Swap16IfLE(cl->scaledScreen->width); + pmsg.buffer_h = Swap16IfLE(cl->scaledScreen->height); + pmsg.pad2 = 0; + + rfbLog("Sending a response to a PalmVNC style frameuffer resize event (%dx%d)\n", cl->scaledScreen->width, cl->scaledScreen->height); + if (rfbWriteExact(cl, (char *)&pmsg, sz_rfbPalmVNCReSizeFrameBufferMsg) < 0) { + rfbLogPerror("rfbNewClient: write"); + rfbCloseClient(cl); + rfbClientConnectionGone(cl); + return FALSE; + } + } + else + { + rfbResizeFrameBufferMsg rmsg; + rmsg.type = rfbResizeFrameBuffer; + rmsg.pad1=0; + rmsg.framebufferWidth = Swap16IfLE(cl->scaledScreen->width); + rmsg.framebufferHeigth = Swap16IfLE(cl->scaledScreen->height); + rfbLog("Sending a response to a UltraVNC style frameuffer resize event (%dx%d)\n", cl->scaledScreen->width, cl->scaledScreen->height); + if (rfbWriteExact(cl, (char *)&rmsg, sz_rfbResizeFrameBufferMsg) < 0) { + rfbLogPerror("rfbNewClient: write"); + rfbCloseClient(cl); + rfbClientConnectionGone(cl); + return FALSE; + } + } + return TRUE; +} +/****************************/ diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/scale.h b/jni/vnc/LibVNCServer-0.9.9/libvncserver/scale.h new file mode 100644 index 0000000..a030d4b --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/scale.h @@ -0,0 +1,10 @@ + +int ScaleX(rfbScreenInfoPtr from, rfbScreenInfoPtr to, int x); +int ScaleY(rfbScreenInfoPtr from, rfbScreenInfoPtr to, int y); +void rfbScaledCorrection(rfbScreenInfoPtr from, rfbScreenInfoPtr to, int *x, int *y, int *w, int *h, const char *function); +void rfbScaledScreenUpdateRect(rfbScreenInfoPtr screen, rfbScreenInfoPtr ptr, int x0, int y0, int w0, int h0); +void rfbScaledScreenUpdate(rfbScreenInfoPtr screen, int x1, int y1, int x2, int y2); +rfbScreenInfoPtr rfbScaledScreenAllocate(rfbClientPtr cl, int width, int height); +rfbScreenInfoPtr rfbScalingFind(rfbClientPtr cl, int width, int height); +void rfbScalingSetup(rfbClientPtr cl, int width, int height); +int rfbSendNewScaleSize(rfbClientPtr cl); diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/selbox.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/selbox.c new file mode 100644 index 0000000..bbc6d52 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/selbox.c @@ -0,0 +1,300 @@ +#include +#include +#include + +typedef struct { + rfbScreenInfoPtr screen; + rfbFontDataPtr font; + char** list; + int listSize; + int selected; + int displayStart; + int x1,y1,x2,y2,textH,pageH; + int xhot,yhot; + int buttonWidth,okBX,cancelBX,okX,cancelX,okY; + rfbBool okInverted,cancelInverted; + int lastButtons; + rfbPixel colour,backColour; + SelectionChangedHookPtr selChangedHook; + enum { SELECTING, OK, CANCEL } state; +} rfbSelectData; + +static const char* okStr="OK"; +static const char* cancelStr="Cancel"; + +static void selPaintButtons(rfbSelectData* m,rfbBool invertOk,rfbBool invertCancel) +{ + rfbScreenInfoPtr s = m->screen; + rfbPixel bcolour = m->backColour; + rfbPixel colour = m->colour; + + rfbFillRect(s,m->x1,m->okY-m->textH,m->x2,m->okY,bcolour); + + if(invertOk) { + rfbFillRect(s,m->okBX,m->okY-m->textH,m->okBX+m->buttonWidth,m->okY,colour); + rfbDrawStringWithClip(s,m->font,m->okX+m->xhot,m->okY-1+m->yhot,okStr, + m->x1,m->okY-m->textH,m->x2,m->okY, + bcolour,colour); + } else + rfbDrawString(s,m->font,m->okX+m->xhot,m->okY-1+m->yhot,okStr,colour); + + if(invertCancel) { + rfbFillRect(s,m->cancelBX,m->okY-m->textH, + m->cancelBX+m->buttonWidth,m->okY,colour); + rfbDrawStringWithClip(s,m->font,m->cancelX+m->xhot,m->okY-1+m->yhot, + cancelStr,m->x1,m->okY-m->textH,m->x2,m->okY, + bcolour,colour); + } else + rfbDrawString(s,m->font,m->cancelX+m->xhot,m->okY-1+m->yhot,cancelStr,colour); + + m->okInverted = invertOk; + m->cancelInverted = invertCancel; +} + +/* line is relative to displayStart */ +static void selPaintLine(rfbSelectData* m,int line,rfbBool invert) +{ + int y1 = m->y1+line*m->textH, y2 = y1+m->textH; + if(y2>m->y2) + y2=m->y2; + rfbFillRect(m->screen,m->x1,y1,m->x2,y2,invert?m->colour:m->backColour); + if(m->displayStart+linelistSize) + rfbDrawStringWithClip(m->screen,m->font,m->x1+m->xhot,y2-1+m->yhot, + m->list[m->displayStart+line], + m->x1,y1,m->x2,y2, + invert?m->backColour:m->colour, + invert?m->backColour:m->colour); +} + +static void selSelect(rfbSelectData* m,int _index) +{ + int delta; + + if(_index==m->selected || _index<0 || _index>=m->listSize) + return; + + if(m->selected>=0) + selPaintLine(m,m->selected-m->displayStart,FALSE); + + if(_indexdisplayStart || _index>=m->displayStart+m->pageH) { + /* targetLine is the screen line in which the selected line will + be displayed. + targetLine = m->pageH/2 doesn't look so nice */ + int targetLine = m->selected-m->displayStart; + int lineStart,lineEnd; + + /* scroll */ + if(_indexpageH-targetLine>=m->listSize) + targetLine = _index+m->pageH-m->listSize; + delta = _index-(m->displayStart+targetLine); + + if(delta>-m->pageH && deltapageH) { + if(delta>0) { + lineStart = m->pageH-delta; + lineEnd = m->pageH; + rfbDoCopyRect(m->screen,m->x1,m->y1,m->x2,m->y1+lineStart*m->textH, + 0,-delta*m->textH); + } else { + lineStart = 0; + lineEnd = -delta; + rfbDoCopyRect(m->screen, + m->x1,m->y1+lineEnd*m->textH,m->x2,m->y2, + 0,-delta*m->textH); + } + } else { + lineStart = 0; + lineEnd = m->pageH; + } + m->displayStart += delta; + for(delta=lineStart;deltaselected = _index; + selPaintLine(m,m->selected-m->displayStart,TRUE); + + if(m->selChangedHook) + m->selChangedHook(_index); + + /* todo: scrollbars */ +} + +static void selKbdAddEvent(rfbBool down,rfbKeySym keySym,rfbClientPtr cl) +{ + if(down) { + if(keySym>' ' && keySym<0xff) { + int i; + rfbSelectData* m = (rfbSelectData*)cl->screen->screenData; + char c = tolower(keySym); + + for(i=m->selected+1;m->list[i] && tolower(m->list[i][0])!=c;i++); + if(!m->list[i]) + for(i=0;iselected && tolower(m->list[i][0])!=c;i++); + selSelect(m,i); + } else if(keySym==XK_Escape) { + rfbSelectData* m = (rfbSelectData*)cl->screen->screenData; + m->state = CANCEL; + } else if(keySym==XK_Return) { + rfbSelectData* m = (rfbSelectData*)cl->screen->screenData; + m->state = OK; + } else { + rfbSelectData* m = (rfbSelectData*)cl->screen->screenData; + int curSel=m->selected; + if(keySym==XK_Up) { + if(curSel>0) + selSelect(m,curSel-1); + } else if(keySym==XK_Down) { + if(curSel+1listSize) + selSelect(m,curSel+1); + } else { + if(keySym==XK_Page_Down) { + if(curSel+m->pageHlistSize) + selSelect(m,curSel+m->pageH); + else + selSelect(m,m->listSize-1); + } else if(keySym==XK_Page_Up) { + if(curSel-m->pageH>=0) + selSelect(m,curSel-m->pageH); + else + selSelect(m,0); + } + } + } + } +} + +static void selPtrAddEvent(int buttonMask,int x,int y,rfbClientPtr cl) +{ + rfbSelectData* m = (rfbSelectData*)cl->screen->screenData; + if(yokY && y>=m->okY-m->textH) { + if(x>=m->okBX && xokBX+m->buttonWidth) { + if(!m->okInverted) + selPaintButtons(m,TRUE,FALSE); + if(buttonMask) + m->state = OK; + } else if(x>=m->cancelBX && xcancelBX+m->buttonWidth) { + if(!m->cancelInverted) + selPaintButtons(m,FALSE,TRUE); + if(buttonMask) + m->state = CANCEL; + } else if(m->okInverted || m->cancelInverted) + selPaintButtons(m,FALSE,FALSE); + } else { + if(m->okInverted || m->cancelInverted) + selPaintButtons(m,FALSE,FALSE); + if(!m->lastButtons && buttonMask) { + if(x>=m->x1 && xx2 && y>=m->y1 && yy2) + selSelect(m,m->displayStart+(y-m->y1)/m->textH); + } + } + m->lastButtons = buttonMask; + + /* todo: scrollbars */ +} + +static rfbCursorPtr selGetCursorPtr(rfbClientPtr cl) +{ + return NULL; +} + +int rfbSelectBox(rfbScreenInfoPtr rfbScreen,rfbFontDataPtr font, + char** list, + int x1,int y1,int x2,int y2, + rfbPixel colour,rfbPixel backColour, + int border,SelectionChangedHookPtr selChangedHook) +{ + int bpp = rfbScreen->bitsPerPixel/8; + char* frameBufferBackup; + void* screenDataBackup = rfbScreen->screenData; + rfbKbdAddEventProcPtr kbdAddEventBackup = rfbScreen->kbdAddEvent; + rfbPtrAddEventProcPtr ptrAddEventBackup = rfbScreen->ptrAddEvent; + rfbGetCursorProcPtr getCursorPtrBackup = rfbScreen->getCursorPtr; + rfbDisplayHookPtr displayHookBackup = rfbScreen->displayHook; + rfbSelectData selData; + int i,j,k; + int fx1,fy1,fx2,fy2; /* for font bbox */ + + if(list==0 || *list==0) + return(-1); + + rfbWholeFontBBox(font, &fx1, &fy1, &fx2, &fy2); + selData.textH = fy2-fy1; + /* I need at least one line for the choice and one for the buttons */ + if(y2-y1screenData = &selData; + rfbScreen->kbdAddEvent = selKbdAddEvent; + rfbScreen->ptrAddEvent = selPtrAddEvent; + rfbScreen->getCursorPtr = selGetCursorPtr; + rfbScreen->displayHook = NULL; + + /* backup screen */ + for(j=0;jframeBuffer+j*rfbScreen->paddedWidthInBytes+x1*bpp, + (x2-x1)*bpp); + + /* paint list and buttons */ + rfbFillRect(rfbScreen,x1,y1,x2,y2,colour); + selPaintButtons(&selData,FALSE,FALSE); + selSelect(&selData,0); + + /* modal loop */ + while(selData.state == SELECTING) + rfbProcessEvents(rfbScreen,20000); + + /* copy back screen data */ + for(j=0;jframeBuffer+j*rfbScreen->paddedWidthInBytes+x1*bpp, + frameBufferBackup+j*(x2-x1)*bpp, + (x2-x1)*bpp); + free(frameBufferBackup); + rfbMarkRectAsModified(rfbScreen,x1,y1,x2,y2); + rfbScreen->screenData = screenDataBackup; + rfbScreen->kbdAddEvent = kbdAddEventBackup; + rfbScreen->ptrAddEvent = ptrAddEventBackup; + rfbScreen->getCursorPtr = getCursorPtrBackup; + rfbScreen->displayHook = displayHookBackup; + + if(selData.state==CANCEL) + selData.selected=-1; + return(selData.selected); +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/sockets.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/sockets.c new file mode 100644 index 0000000..84c9c98 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/sockets.c @@ -0,0 +1,1053 @@ +/* + * sockets.c - deal with TCP & UDP sockets. + * + * This code should be independent of any changes in the RFB protocol. It just + * deals with the X server scheduling stuff, calling rfbNewClientConnection and + * rfbProcessClientMessage to actually deal with the protocol. If a socket + * needs to be closed for any reason then rfbCloseClient should be called, and + * this in turn will call rfbClientConnectionGone. To make an active + * connection out, call rfbConnect - note that this does _not_ call + * rfbNewClientConnection. + * + * This file is divided into two types of function. Those beginning with + * "rfb" are specific to sockets using the RFB protocol. Those without the + * "rfb" prefix are more general socket routines (which are used by the http + * code). + * + * Thanks to Karl Hakimian for pointing out that some platforms return EAGAIN + * not EWOULDBLOCK. + */ + +/* + * Copyright (C) 2011-2012 Christian Beier + * Copyright (C) 2005 Rohit Kumar, Johannes E. Schindelin + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include + +#ifdef LIBVNCSERVER_HAVE_SYS_TYPES_H +#include +#endif + +#ifdef LIBVNCSERVER_HAVE_SYS_TIME_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_SYS_SOCKET_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_NETINET_IN_H +#include +#include +#include +#include +#endif +#ifdef LIBVNCSERVER_HAVE_UNISTD_H +#include +#endif + +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS +#include "rfbssl.h" +#endif + +#if defined(__linux__) && defined(NEED_TIMEVAL) +struct timeval +{ + long int tv_sec,tv_usec; +} +; +#endif + +#ifdef LIBVNCSERVER_HAVE_FCNTL_H +#include +#endif + +#include + +#ifdef USE_LIBWRAP +#include +#include +int allow_severity=LOG_INFO; +int deny_severity=LOG_WARNING; +#endif + +#if defined(WIN32) +#ifndef __MINGW32__ +#pragma warning (disable: 4018 4761) +#endif +#define read(sock,buf,len) recv(sock,buf,len,0) +#define EWOULDBLOCK WSAEWOULDBLOCK +#define ETIMEDOUT WSAETIMEDOUT +#define write(sock,buf,len) send(sock,buf,len,0) +#else +#define closesocket close +#endif + +int rfbMaxClientWait = 20000; /* time (ms) after which we decide client has + gone away - needed to stop us hanging */ + +/* + * rfbInitSockets sets up the TCP and UDP sockets to listen for RFB + * connections. It does nothing if called again. + */ + +void +rfbInitSockets(rfbScreenInfoPtr rfbScreen) +{ + in_addr_t iface = rfbScreen->listenInterface; + + if (rfbScreen->socketState!=RFB_SOCKET_INIT) + return; + + rfbScreen->socketState = RFB_SOCKET_READY; + + if (rfbScreen->inetdSock != -1) { + const int one = 1; + + if(!rfbSetNonBlocking(rfbScreen->inetdSock)) + return; + + if (setsockopt(rfbScreen->inetdSock, IPPROTO_TCP, TCP_NODELAY, + (char *)&one, sizeof(one)) < 0) { + rfbLogPerror("setsockopt"); + return; + } + + FD_ZERO(&(rfbScreen->allFds)); + FD_SET(rfbScreen->inetdSock, &(rfbScreen->allFds)); + rfbScreen->maxFd = rfbScreen->inetdSock; + return; + } + + if(rfbScreen->autoPort) { + int i; + FD_ZERO(&(rfbScreen->allFds)); + + rfbLog("Autoprobing TCP port \n"); + for (i = 5900; i < 6000; i++) { + if ((rfbScreen->listenSock = rfbListenOnTCPPort(i, iface)) >= 0) { + rfbScreen->port = i; + break; + } + } + + if (i >= 6000) { + rfbLogPerror("Failure autoprobing"); + return; + } + + rfbLog("Autoprobing selected TCP port %d\n", rfbScreen->port); + FD_SET(rfbScreen->listenSock, &(rfbScreen->allFds)); + rfbScreen->maxFd = rfbScreen->listenSock; + +#ifdef LIBVNCSERVER_IPv6 + rfbLog("Autoprobing TCP6 port \n"); + for (i = 5900; i < 6000; i++) { + if ((rfbScreen->listen6Sock = rfbListenOnTCP6Port(i, rfbScreen->listen6Interface)) >= 0) { + rfbScreen->ipv6port = i; + break; + } + } + + if (i >= 6000) { + rfbLogPerror("Failure autoprobing"); + return; + } + + rfbLog("Autoprobing selected TCP6 port %d\n", rfbScreen->ipv6port); + FD_SET(rfbScreen->listen6Sock, &(rfbScreen->allFds)); + rfbScreen->maxFd = max((int)rfbScreen->listen6Sock,rfbScreen->maxFd); +#endif + } + else if(rfbScreen->port>0) { + FD_ZERO(&(rfbScreen->allFds)); + + if ((rfbScreen->listenSock = rfbListenOnTCPPort(rfbScreen->port, iface)) < 0) { + rfbLogPerror("ListenOnTCPPort"); + return; + } + rfbLog("Listening for VNC connections on TCP port %d\n", rfbScreen->port); + + FD_SET(rfbScreen->listenSock, &(rfbScreen->allFds)); + rfbScreen->maxFd = rfbScreen->listenSock; + +#ifdef LIBVNCSERVER_IPv6 + if ((rfbScreen->listen6Sock = rfbListenOnTCP6Port(rfbScreen->ipv6port, rfbScreen->listen6Interface)) < 0) { + /* ListenOnTCP6Port has its own detailed error printout */ + return; + } + rfbLog("Listening for VNC connections on TCP6 port %d\n", rfbScreen->ipv6port); + + FD_SET(rfbScreen->listen6Sock, &(rfbScreen->allFds)); + rfbScreen->maxFd = max((int)rfbScreen->listen6Sock,rfbScreen->maxFd); +#endif + + } + + if (rfbScreen->udpPort != 0) { + rfbLog("rfbInitSockets: listening for input on UDP port %d\n",rfbScreen->udpPort); + + if ((rfbScreen->udpSock = rfbListenOnUDPPort(rfbScreen->udpPort, iface)) < 0) { + rfbLogPerror("ListenOnUDPPort"); + return; + } + rfbLog("Listening for VNC connections on TCP port %d\n", rfbScreen->port); + + FD_SET(rfbScreen->udpSock, &(rfbScreen->allFds)); + rfbScreen->maxFd = max((int)rfbScreen->udpSock,rfbScreen->maxFd); + } +} + +void rfbShutdownSockets(rfbScreenInfoPtr rfbScreen) +{ + if (rfbScreen->socketState!=RFB_SOCKET_READY) + return; + + rfbScreen->socketState = RFB_SOCKET_SHUTDOWN; + + if(rfbScreen->inetdSock>-1) { + closesocket(rfbScreen->inetdSock); + FD_CLR(rfbScreen->inetdSock,&rfbScreen->allFds); + rfbScreen->inetdSock=-1; + } + + if(rfbScreen->listenSock>-1) { + closesocket(rfbScreen->listenSock); + FD_CLR(rfbScreen->listenSock,&rfbScreen->allFds); + rfbScreen->listenSock=-1; + } + + if(rfbScreen->listen6Sock>-1) { + closesocket(rfbScreen->listen6Sock); + FD_CLR(rfbScreen->listen6Sock,&rfbScreen->allFds); + rfbScreen->listen6Sock=-1; + } + + if(rfbScreen->udpSock>-1) { + closesocket(rfbScreen->udpSock); + FD_CLR(rfbScreen->udpSock,&rfbScreen->allFds); + rfbScreen->udpSock=-1; + } +} + +/* + * rfbCheckFds is called from ProcessInputEvents to check for input on the RFB + * socket(s). If there is input to process, the appropriate function in the + * RFB server code will be called (rfbNewClientConnection, + * rfbProcessClientMessage, etc). + */ + +int +rfbCheckFds(rfbScreenInfoPtr rfbScreen,long usec) +{ + int nfds; + fd_set fds; + struct timeval tv; + struct sockaddr_in addr; + socklen_t addrlen = sizeof(addr); + char buf[6]; + rfbClientIteratorPtr i; + rfbClientPtr cl; + int result = 0; + + if (!rfbScreen->inetdInitDone && rfbScreen->inetdSock != -1) { + rfbNewClientConnection(rfbScreen,rfbScreen->inetdSock); + rfbScreen->inetdInitDone = TRUE; + } + + do { + memcpy((char *)&fds, (char *)&(rfbScreen->allFds), sizeof(fd_set)); + tv.tv_sec = 0; + tv.tv_usec = usec; + nfds = select(rfbScreen->maxFd + 1, &fds, NULL, NULL /* &fds */, &tv); + if (nfds == 0) { + /* timed out, check for async events */ + i = rfbGetClientIterator(rfbScreen); + while((cl = rfbClientIteratorNext(i))) { + if (cl->onHold) + continue; + if (FD_ISSET(cl->sock, &(rfbScreen->allFds))) + rfbSendFileTransferChunk(cl); + } + rfbReleaseClientIterator(i); + return result; + } + + if (nfds < 0) { +#ifdef WIN32 + errno = WSAGetLastError(); +#endif + if (errno != EINTR) + rfbLogPerror("rfbCheckFds: select"); + return -1; + } + + result += nfds; + + if (rfbScreen->listenSock != -1 && FD_ISSET(rfbScreen->listenSock, &fds)) { + + if (!rfbProcessNewConnection(rfbScreen)) + return -1; + + FD_CLR(rfbScreen->listenSock, &fds); + if (--nfds == 0) + return result; + } + + if (rfbScreen->listen6Sock != -1 && FD_ISSET(rfbScreen->listen6Sock, &fds)) { + + if (!rfbProcessNewConnection(rfbScreen)) + return -1; + + FD_CLR(rfbScreen->listen6Sock, &fds); + if (--nfds == 0) + return result; + } + + if ((rfbScreen->udpSock != -1) && FD_ISSET(rfbScreen->udpSock, &fds)) { + if(!rfbScreen->udpClient) + rfbNewUDPClient(rfbScreen); + if (recvfrom(rfbScreen->udpSock, buf, 1, MSG_PEEK, + (struct sockaddr *)&addr, &addrlen) < 0) { + rfbLogPerror("rfbCheckFds: UDP: recvfrom"); + rfbDisconnectUDPSock(rfbScreen); + rfbScreen->udpSockConnected = FALSE; + } else { + if (!rfbScreen->udpSockConnected || + (memcmp(&addr, &rfbScreen->udpRemoteAddr, addrlen) != 0)) + { + /* new remote end */ + rfbLog("rfbCheckFds: UDP: got connection\n"); + + memcpy(&rfbScreen->udpRemoteAddr, &addr, addrlen); + rfbScreen->udpSockConnected = TRUE; + + if (connect(rfbScreen->udpSock, + (struct sockaddr *)&addr, addrlen) < 0) { + rfbLogPerror("rfbCheckFds: UDP: connect"); + rfbDisconnectUDPSock(rfbScreen); + return -1; + } + + rfbNewUDPConnection(rfbScreen,rfbScreen->udpSock); + } + + rfbProcessUDPInput(rfbScreen); + } + + FD_CLR(rfbScreen->udpSock, &fds); + if (--nfds == 0) + return result; + } + + i = rfbGetClientIterator(rfbScreen); + while((cl = rfbClientIteratorNext(i))) { + + if (cl->onHold) + continue; + + if (FD_ISSET(cl->sock, &(rfbScreen->allFds))) + { + if (FD_ISSET(cl->sock, &fds)) + rfbProcessClientMessage(cl); + else + rfbSendFileTransferChunk(cl); + } + } + rfbReleaseClientIterator(i); + } while(rfbScreen->handleEventsEagerly); + return result; +} + +rfbBool +rfbProcessNewConnection(rfbScreenInfoPtr rfbScreen) +{ + const int one = 1; + int sock = -1; +#ifdef LIBVNCSERVER_IPv6 + struct sockaddr_storage addr; +#else + struct sockaddr_in addr; +#endif + socklen_t addrlen = sizeof(addr); + fd_set listen_fds; + int chosen_listen_sock = -1; + + /* Do another select() call to find out which listen socket + has an incoming connection pending. We know that at least + one of them has, so this should not block for too long! */ + FD_ZERO(&listen_fds); + if(rfbScreen->listenSock >= 0) + FD_SET(rfbScreen->listenSock, &listen_fds); + if(rfbScreen->listen6Sock >= 0) + FD_SET(rfbScreen->listen6Sock, &listen_fds); + if (select(rfbScreen->maxFd+1, &listen_fds, NULL, NULL, NULL) == -1) { + rfbLogPerror("rfbProcessNewConnection: error in select"); + return FALSE; + } + if (FD_ISSET(rfbScreen->listenSock, &listen_fds)) + chosen_listen_sock = rfbScreen->listenSock; + if (FD_ISSET(rfbScreen->listen6Sock, &listen_fds)) + chosen_listen_sock = rfbScreen->listen6Sock; + + if ((sock = accept(chosen_listen_sock, + (struct sockaddr *)&addr, &addrlen)) < 0) { + rfbLogPerror("rfbCheckFds: accept"); + return FALSE; + } + + if(!rfbSetNonBlocking(sock)) { + closesocket(sock); + return FALSE; + } + + if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, + (char *)&one, sizeof(one)) < 0) { + rfbLogPerror("rfbCheckFds: setsockopt"); + closesocket(sock); + return FALSE; + } + +#ifdef USE_LIBWRAP + if(!hosts_ctl("vnc",STRING_UNKNOWN,inet_ntoa(addr.sin_addr), + STRING_UNKNOWN)) { + rfbLog("Rejected connection from client %s\n", + inet_ntoa(addr.sin_addr)); + closesocket(sock); + return FALSE; + } +#endif + +#ifdef LIBVNCSERVER_IPv6 + char host[1024]; + if(getnameinfo((struct sockaddr*)&addr, addrlen, host, sizeof(host), NULL, 0, NI_NUMERICHOST) != 0) { + rfbLogPerror("rfbProcessNewConnection: error in getnameinfo"); + } + rfbLog("Got connection from client %s\n", host); +#else + rfbLog("Got connection from client %s\n", inet_ntoa(addr.sin_addr)); +#endif + + rfbNewClient(rfbScreen,sock); + + return TRUE; +} + + +void +rfbDisconnectUDPSock(rfbScreenInfoPtr rfbScreen) +{ + rfbScreen->udpSockConnected = FALSE; +} + + + +void +rfbCloseClient(rfbClientPtr cl) +{ + rfbExtensionData* extension; + + for(extension=cl->extensions; extension; extension=extension->next) + if(extension->extension->close) + extension->extension->close(cl, extension->data); + + LOCK(cl->updateMutex); +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD + if (cl->sock != -1) +#endif + { + FD_CLR(cl->sock,&(cl->screen->allFds)); + if(cl->sock==cl->screen->maxFd) + while(cl->screen->maxFd>0 + && !FD_ISSET(cl->screen->maxFd,&(cl->screen->allFds))) + cl->screen->maxFd--; +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS + if (cl->sslctx) + rfbssl_destroy(cl); + free(cl->wspath); +#endif +#ifndef __MINGW32__ + shutdown(cl->sock,SHUT_RDWR); +#endif + closesocket(cl->sock); + cl->sock = -1; + } + TSIGNAL(cl->updateCond); + UNLOCK(cl->updateMutex); +} + + +/* + * rfbConnect is called to make a connection out to a given TCP address. + */ + +int +rfbConnect(rfbScreenInfoPtr rfbScreen, + char *host, + int port) +{ + int sock; + int one = 1; + + rfbLog("Making connection to client on host %s port %d\n", + host,port); + + if ((sock = rfbConnectToTcpAddr(host, port)) < 0) { + rfbLogPerror("connection failed"); + return -1; + } + + if(!rfbSetNonBlocking(sock)) { + closesocket(sock); + return -1; + } + + if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, + (char *)&one, sizeof(one)) < 0) { + rfbLogPerror("setsockopt failed"); + closesocket(sock); + return -1; + } + + /* AddEnabledDevice(sock); */ + FD_SET(sock, &rfbScreen->allFds); + rfbScreen->maxFd = max(sock,rfbScreen->maxFd); + + return sock; +} + +/* + * ReadExact reads an exact number of bytes from a client. Returns 1 if + * those bytes have been read, 0 if the other end has closed, or -1 if an error + * occurred (errno is set to ETIMEDOUT if it timed out). + */ + +int +rfbReadExactTimeout(rfbClientPtr cl, char* buf, int len, int timeout) +{ + int sock = cl->sock; + int n; + fd_set fds; + struct timeval tv; + + while (len > 0) { +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS + if (cl->wsctx) { + n = webSocketsDecode(cl, buf, len); + } else if (cl->sslctx) { + n = rfbssl_read(cl, buf, len); + } else { + n = read(sock, buf, len); + } +#else + n = read(sock, buf, len); +#endif + + if (n > 0) { + + buf += n; + len -= n; + + } else if (n == 0) { + + return 0; + + } else { +#ifdef WIN32 + errno = WSAGetLastError(); +#endif + if (errno == EINTR) + continue; + +#ifdef LIBVNCSERVER_ENOENT_WORKAROUND + if (errno != ENOENT) +#endif + if (errno != EWOULDBLOCK && errno != EAGAIN) { + return n; + } + +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS + if (cl->sslctx) { + if (rfbssl_pending(cl)) + continue; + } +#endif + FD_ZERO(&fds); + FD_SET(sock, &fds); + tv.tv_sec = timeout / 1000; + tv.tv_usec = (timeout % 1000) * 1000; + n = select(sock+1, &fds, NULL, &fds, &tv); + if (n < 0) { + rfbLogPerror("ReadExact: select"); + return n; + } + if (n == 0) { + rfbErr("ReadExact: select timeout\n"); + errno = ETIMEDOUT; + return -1; + } + } + } +#undef DEBUG_READ_EXACT +#ifdef DEBUG_READ_EXACT + rfbLog("ReadExact %d bytes\n",len); + for(n=0;nscreen && cl->screen->maxClientWait) + return(rfbReadExactTimeout(cl,buf,len,cl->screen->maxClientWait)); + else + return(rfbReadExactTimeout(cl,buf,len,rfbMaxClientWait)); +} + +/* + * PeekExact peeks at an exact number of bytes from a client. Returns 1 if + * those bytes have been read, 0 if the other end has closed, or -1 if an + * error occurred (errno is set to ETIMEDOUT if it timed out). + */ + +int +rfbPeekExactTimeout(rfbClientPtr cl, char* buf, int len, int timeout) +{ + int sock = cl->sock; + int n; + fd_set fds; + struct timeval tv; + + while (len > 0) { +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS + if (cl->sslctx) + n = rfbssl_peek(cl, buf, len); + else +#endif + n = recv(sock, buf, len, MSG_PEEK); + + if (n == len) { + + break; + + } else if (n == 0) { + + return 0; + + } else { +#ifdef WIN32 + errno = WSAGetLastError(); +#endif + if (errno == EINTR) + continue; + +#ifdef LIBVNCSERVER_ENOENT_WORKAROUND + if (errno != ENOENT) +#endif + if (errno != EWOULDBLOCK && errno != EAGAIN) { + return n; + } + +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS + if (cl->sslctx) { + if (rfbssl_pending(cl)) + continue; + } +#endif + FD_ZERO(&fds); + FD_SET(sock, &fds); + tv.tv_sec = timeout / 1000; + tv.tv_usec = (timeout % 1000) * 1000; + n = select(sock+1, &fds, NULL, &fds, &tv); + if (n < 0) { + rfbLogPerror("PeekExact: select"); + return n; + } + if (n == 0) { + errno = ETIMEDOUT; + return -1; + } + } + } +#undef DEBUG_READ_EXACT +#ifdef DEBUG_READ_EXACT + rfbLog("PeekExact %d bytes\n",len); + for(n=0;nsock; + int n; + fd_set fds; + struct timeval tv; + int totalTimeWaited = 0; + const int timeout = (cl->screen && cl->screen->maxClientWait) ? cl->screen->maxClientWait : rfbMaxClientWait; + +#undef DEBUG_WRITE_EXACT +#ifdef DEBUG_WRITE_EXACT + rfbLog("WriteExact %d bytes\n",len); + for(n=0;nwsctx) { + char *tmp = NULL; + if ((len = webSocketsEncode(cl, buf, len, &tmp)) < 0) { + rfbErr("WriteExact: WebSockets encode error\n"); + return -1; + } + buf = tmp; + } +#endif + + LOCK(cl->outputMutex); + while (len > 0) { +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS + if (cl->sslctx) + n = rfbssl_write(cl, buf, len); + else +#endif + n = write(sock, buf, len); + + if (n > 0) { + + buf += n; + len -= n; + + } else if (n == 0) { + + rfbErr("WriteExact: write returned 0?\n"); + return 0; + + } else { +#ifdef WIN32 + errno = WSAGetLastError(); +#endif + if (errno == EINTR) + continue; + + if (errno != EWOULDBLOCK && errno != EAGAIN) { + UNLOCK(cl->outputMutex); + return n; + } + + /* Retry every 5 seconds until we exceed timeout. We + need to do this because select doesn't necessarily return + immediately when the other end has gone away */ + + FD_ZERO(&fds); + FD_SET(sock, &fds); + tv.tv_sec = 5; + tv.tv_usec = 0; + n = select(sock+1, NULL, &fds, NULL /* &fds */, &tv); + if (n < 0) { +#ifdef WIN32 + errno=WSAGetLastError(); +#endif + if(errno==EINTR) + continue; + rfbLogPerror("WriteExact: select"); + UNLOCK(cl->outputMutex); + return n; + } + if (n == 0) { + totalTimeWaited += 5000; + if (totalTimeWaited >= timeout) { + errno = ETIMEDOUT; + UNLOCK(cl->outputMutex); + return -1; + } + } else { + totalTimeWaited = 0; + } + } + } + UNLOCK(cl->outputMutex); + return 1; +} + +/* currently private, called by rfbProcessArguments() */ +int +rfbStringToAddr(char *str, in_addr_t *addr) { + if (str == NULL || *str == '\0' || strcmp(str, "any") == 0) { + *addr = htonl(INADDR_ANY); + } else if (strcmp(str, "localhost") == 0) { + *addr = htonl(INADDR_LOOPBACK); + } else { + struct hostent *hp; + if ((*addr = inet_addr(str)) == htonl(INADDR_NONE)) { + if (!(hp = gethostbyname(str))) { + return 0; + } + *addr = *(unsigned long *)hp->h_addr; + } + } + return 1; +} + +int +rfbListenOnTCPPort(int port, + in_addr_t iface) +{ + struct sockaddr_in addr; + int sock; + int one = 1; + + memset(&addr, 0, sizeof(addr)); + addr.sin_family = AF_INET; + addr.sin_port = htons(port); + addr.sin_addr.s_addr = iface; + + if ((sock = socket(AF_INET, SOCK_STREAM, 0)) < 0) { + return -1; + } + if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, + (char *)&one, sizeof(one)) < 0) { + closesocket(sock); + return -1; + } + if (bind(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) { + closesocket(sock); + return -1; + } + if (listen(sock, 32) < 0) { + closesocket(sock); + return -1; + } + + return sock; +} + + +int +rfbListenOnTCP6Port(int port, + const char* iface) +{ +#ifndef LIBVNCSERVER_IPv6 + rfbLogPerror("This LibVNCServer does not have IPv6 support"); + return -1; +#else + int sock; + int one = 1; + int rv; + struct addrinfo hints, *servinfo, *p; + char port_str[8]; + + snprintf(port_str, 8, "%d", port); + + memset(&hints, 0, sizeof(hints)); + hints.ai_family = AF_INET6; + hints.ai_socktype = SOCK_STREAM; + hints.ai_flags = AI_PASSIVE; /* fill in wildcard address if iface == NULL */ + + if ((rv = getaddrinfo(iface, port_str, &hints, &servinfo)) != 0) { + rfbErr("rfbListenOnTCP6Port error in getaddrinfo: %s\n", gai_strerror(rv)); + return -1; + } + + /* loop through all the results and bind to the first we can */ + for(p = servinfo; p != NULL; p = p->ai_next) { + if ((sock = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) < 0) { + continue; + } + +#ifdef IPV6_V6ONLY + /* we have seperate IPv4 and IPv6 sockets since some OS's do not support dual binding */ + if (setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY, (char *)&one, sizeof(one)) < 0) { + rfbLogPerror("rfbListenOnTCP6Port error in setsockopt IPV6_V6ONLY"); + closesocket(sock); + freeaddrinfo(servinfo); + return -1; + } +#endif + + if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (char *)&one, sizeof(one)) < 0) { + rfbLogPerror("rfbListenOnTCP6Port: error in setsockopt SO_REUSEADDR"); + closesocket(sock); + freeaddrinfo(servinfo); + return -1; + } + + if (bind(sock, p->ai_addr, p->ai_addrlen) < 0) { + closesocket(sock); + continue; + } + + break; + } + + if (p == NULL) { + rfbLogPerror("rfbListenOnTCP6Port: error in bind IPv6 socket"); + freeaddrinfo(servinfo); + return -1; + } + + /* all done with this structure now */ + freeaddrinfo(servinfo); + + if (listen(sock, 32) < 0) { + rfbLogPerror("rfbListenOnTCP6Port: error in listen on IPv6 socket"); + closesocket(sock); + return -1; + } + + return sock; +#endif +} + + +int +rfbConnectToTcpAddr(char *host, + int port) +{ + int sock; +#ifdef LIBVNCSERVER_IPv6 + struct addrinfo hints, *servinfo, *p; + int rv; + char port_str[8]; + + snprintf(port_str, 8, "%d", port); + + memset(&hints, 0, sizeof hints); + hints.ai_family = AF_UNSPEC; + hints.ai_socktype = SOCK_STREAM; + + if ((rv = getaddrinfo(host, port_str, &hints, &servinfo)) != 0) { + rfbErr("rfbConnectToTcpAddr: error in getaddrinfo: %s\n", gai_strerror(rv)); + return -1; + } + + /* loop through all the results and connect to the first we can */ + for(p = servinfo; p != NULL; p = p->ai_next) { + if ((sock = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) < 0) + continue; + + if (connect(sock, p->ai_addr, p->ai_addrlen) < 0) { + closesocket(sock); + continue; + } + + break; + } + + /* all failed */ + if (p == NULL) { + rfbLogPerror("rfbConnectToTcoAddr: failed to connect\n"); + sock = -1; /* set return value */ + } + + /* all done with this structure now */ + freeaddrinfo(servinfo); +#else + struct hostent *hp; + struct sockaddr_in addr; + + memset(&addr, 0, sizeof(addr)); + addr.sin_family = AF_INET; + addr.sin_port = htons(port); + + if ((addr.sin_addr.s_addr = inet_addr(host)) == htonl(INADDR_NONE)) + { + if (!(hp = gethostbyname(host))) { + errno = EINVAL; + return -1; + } + addr.sin_addr.s_addr = *(unsigned long *)hp->h_addr; + } + + if ((sock = socket(AF_INET, SOCK_STREAM, 0)) < 0) { + return -1; + } + + if (connect(sock, (struct sockaddr *)&addr, (sizeof(addr))) < 0) { + closesocket(sock); + return -1; + } +#endif + return sock; +} + +int +rfbListenOnUDPPort(int port, + in_addr_t iface) +{ + struct sockaddr_in addr; + int sock; + int one = 1; + + memset(&addr, 0, sizeof(addr)); + addr.sin_family = AF_INET; + addr.sin_port = htons(port); + addr.sin_addr.s_addr = iface; + + if ((sock = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { + return -1; + } + if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, + (char *)&one, sizeof(one)) < 0) { + return -1; + } + if (bind(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) { + return -1; + } + + return sock; +} + +/* + * rfbSetNonBlocking sets a socket into non-blocking mode. + */ +rfbBool +rfbSetNonBlocking(int sock) +{ +#ifdef WIN32 + unsigned long block=1; + if(ioctlsocket(sock, FIONBIO, &block) == SOCKET_ERROR) { + errno=WSAGetLastError(); +#else + int flags = fcntl(sock, F_GETFL); + if(flags < 0 || fcntl(sock, F_SETFL, flags | O_NONBLOCK) < 0) { +#endif + rfbLogPerror("Setting socket to non-blocking failed"); + return FALSE; + } + return TRUE; +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/stats.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/stats.c new file mode 100644 index 0000000..39de1c6 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/stats.c @@ -0,0 +1,479 @@ +/* + * stats.c + */ + +/* + * Copyright (C) 2002 RealVNC Ltd. + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include + +char *messageNameServer2Client(uint32_t type, char *buf, int len); +char *messageNameClient2Server(uint32_t type, char *buf, int len); +char *encodingName(uint32_t enc, char *buf, int len); + +rfbStatList *rfbStatLookupEncoding(rfbClientPtr cl, uint32_t type); +rfbStatList *rfbStatLookupMessage(rfbClientPtr cl, uint32_t type); + +void rfbStatRecordEncodingSent(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw); +void rfbStatRecordEncodingRcvd(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw); +void rfbStatRecordMessageSent(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw); +void rfbStatRecordMessageRcvd(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw); +void rfbResetStats(rfbClientPtr cl); +void rfbPrintStats(rfbClientPtr cl); + + + + +char *messageNameServer2Client(uint32_t type, char *buf, int len) { + if (buf==NULL) return "error"; + switch (type) { + case rfbFramebufferUpdate: snprintf(buf, len, "FramebufferUpdate"); break; + case rfbSetColourMapEntries: snprintf(buf, len, "SetColourMapEntries"); break; + case rfbBell: snprintf(buf, len, "Bell"); break; + case rfbServerCutText: snprintf(buf, len, "ServerCutText"); break; + case rfbResizeFrameBuffer: snprintf(buf, len, "ResizeFrameBuffer"); break; + case rfbFileTransfer: snprintf(buf, len, "FileTransfer"); break; + case rfbTextChat: snprintf(buf, len, "TextChat"); break; + case rfbPalmVNCReSizeFrameBuffer: snprintf(buf, len, "PalmVNCReSize"); break; + case rfbXvp: snprintf(buf, len, "XvpServerMessage"); break; + default: + snprintf(buf, len, "svr2cli-0x%08X", 0xFF); + } + return buf; +} + +char *messageNameClient2Server(uint32_t type, char *buf, int len) { + if (buf==NULL) return "error"; + switch (type) { + case rfbSetPixelFormat: snprintf(buf, len, "SetPixelFormat"); break; + case rfbFixColourMapEntries: snprintf(buf, len, "FixColourMapEntries"); break; + case rfbSetEncodings: snprintf(buf, len, "SetEncodings"); break; + case rfbFramebufferUpdateRequest: snprintf(buf, len, "FramebufferUpdate"); break; + case rfbKeyEvent: snprintf(buf, len, "KeyEvent"); break; + case rfbPointerEvent: snprintf(buf, len, "PointerEvent"); break; + case rfbClientCutText: snprintf(buf, len, "ClientCutText"); break; + case rfbFileTransfer: snprintf(buf, len, "FileTransfer"); break; + case rfbSetScale: snprintf(buf, len, "SetScale"); break; + case rfbSetServerInput: snprintf(buf, len, "SetServerInput"); break; + case rfbSetSW: snprintf(buf, len, "SetSingleWindow"); break; + case rfbTextChat: snprintf(buf, len, "TextChat"); break; + case rfbPalmVNCSetScaleFactor: snprintf(buf, len, "PalmVNCSetScale"); break; + case rfbXvp: snprintf(buf, len, "XvpClientMessage"); break; + default: + snprintf(buf, len, "cli2svr-0x%08X", type); + + + } + return buf; +} + +/* Encoding name must be <=16 characters to fit nicely on the status output in + * an 80 column terminal window + */ +char *encodingName(uint32_t type, char *buf, int len) { + if (buf==NULL) return "error"; + + switch (type) { + case rfbEncodingRaw: snprintf(buf, len, "raw"); break; + case rfbEncodingCopyRect: snprintf(buf, len, "copyRect"); break; + case rfbEncodingRRE: snprintf(buf, len, "RRE"); break; + case rfbEncodingCoRRE: snprintf(buf, len, "CoRRE"); break; + case rfbEncodingHextile: snprintf(buf, len, "hextile"); break; + case rfbEncodingZlib: snprintf(buf, len, "zlib"); break; + case rfbEncodingTight: snprintf(buf, len, "tight"); break; + case rfbEncodingTightPng: snprintf(buf, len, "tightPng"); break; + case rfbEncodingZlibHex: snprintf(buf, len, "zlibhex"); break; + case rfbEncodingUltra: snprintf(buf, len, "ultra"); break; + case rfbEncodingZRLE: snprintf(buf, len, "ZRLE"); break; + case rfbEncodingZYWRLE: snprintf(buf, len, "ZYWRLE"); break; + case rfbEncodingCache: snprintf(buf, len, "cache"); break; + case rfbEncodingCacheEnable: snprintf(buf, len, "cacheEnable"); break; + case rfbEncodingXOR_Zlib: snprintf(buf, len, "xorZlib"); break; + case rfbEncodingXORMonoColor_Zlib: snprintf(buf, len, "xorMonoZlib"); break; + case rfbEncodingXORMultiColor_Zlib: snprintf(buf, len, "xorColorZlib"); break; + case rfbEncodingSolidColor: snprintf(buf, len, "solidColor"); break; + case rfbEncodingXOREnable: snprintf(buf, len, "xorEnable"); break; + case rfbEncodingCacheZip: snprintf(buf, len, "cacheZip"); break; + case rfbEncodingSolMonoZip: snprintf(buf, len, "monoZip"); break; + case rfbEncodingUltraZip: snprintf(buf, len, "ultraZip"); break; + + case rfbEncodingXCursor: snprintf(buf, len, "Xcursor"); break; + case rfbEncodingRichCursor: snprintf(buf, len, "RichCursor"); break; + case rfbEncodingPointerPos: snprintf(buf, len, "PointerPos"); break; + + case rfbEncodingLastRect: snprintf(buf, len, "LastRect"); break; + case rfbEncodingNewFBSize: snprintf(buf, len, "NewFBSize"); break; + case rfbEncodingKeyboardLedState: snprintf(buf, len, "LedState"); break; + case rfbEncodingSupportedMessages: snprintf(buf, len, "SupportedMessage"); break; + case rfbEncodingSupportedEncodings: snprintf(buf, len, "SupportedEncoding"); break; + case rfbEncodingServerIdentity: snprintf(buf, len, "ServerIdentify"); break; + + /* The following lookups do not report in stats */ + case rfbEncodingCompressLevel0: snprintf(buf, len, "CompressLevel0"); break; + case rfbEncodingCompressLevel1: snprintf(buf, len, "CompressLevel1"); break; + case rfbEncodingCompressLevel2: snprintf(buf, len, "CompressLevel2"); break; + case rfbEncodingCompressLevel3: snprintf(buf, len, "CompressLevel3"); break; + case rfbEncodingCompressLevel4: snprintf(buf, len, "CompressLevel4"); break; + case rfbEncodingCompressLevel5: snprintf(buf, len, "CompressLevel5"); break; + case rfbEncodingCompressLevel6: snprintf(buf, len, "CompressLevel6"); break; + case rfbEncodingCompressLevel7: snprintf(buf, len, "CompressLevel7"); break; + case rfbEncodingCompressLevel8: snprintf(buf, len, "CompressLevel8"); break; + case rfbEncodingCompressLevel9: snprintf(buf, len, "CompressLevel9"); break; + + case rfbEncodingQualityLevel0: snprintf(buf, len, "QualityLevel0"); break; + case rfbEncodingQualityLevel1: snprintf(buf, len, "QualityLevel1"); break; + case rfbEncodingQualityLevel2: snprintf(buf, len, "QualityLevel2"); break; + case rfbEncodingQualityLevel3: snprintf(buf, len, "QualityLevel3"); break; + case rfbEncodingQualityLevel4: snprintf(buf, len, "QualityLevel4"); break; + case rfbEncodingQualityLevel5: snprintf(buf, len, "QualityLevel5"); break; + case rfbEncodingQualityLevel6: snprintf(buf, len, "QualityLevel6"); break; + case rfbEncodingQualityLevel7: snprintf(buf, len, "QualityLevel7"); break; + case rfbEncodingQualityLevel8: snprintf(buf, len, "QualityLevel8"); break; + case rfbEncodingQualityLevel9: snprintf(buf, len, "QualityLevel9"); break; + + + default: + snprintf(buf, len, "Enc(0x%08X)", type); + } + + return buf; +} + + + + + +rfbStatList *rfbStatLookupEncoding(rfbClientPtr cl, uint32_t type) +{ + rfbStatList *ptr; + if (cl==NULL) return NULL; + for (ptr = cl->statEncList; ptr!=NULL; ptr=ptr->Next) + { + if (ptr->type==type) return ptr; + } + /* Well, we are here... need to *CREATE* an entry */ + ptr = (rfbStatList *)malloc(sizeof(rfbStatList)); + if (ptr!=NULL) + { + memset((char *)ptr, 0, sizeof(rfbStatList)); + ptr->type = type; + /* add to the top of the list */ + ptr->Next = cl->statEncList; + cl->statEncList = ptr; + } + return ptr; +} + + +rfbStatList *rfbStatLookupMessage(rfbClientPtr cl, uint32_t type) +{ + rfbStatList *ptr; + if (cl==NULL) return NULL; + for (ptr = cl->statMsgList; ptr!=NULL; ptr=ptr->Next) + { + if (ptr->type==type) return ptr; + } + /* Well, we are here... need to *CREATE* an entry */ + ptr = (rfbStatList *)malloc(sizeof(rfbStatList)); + if (ptr!=NULL) + { + memset((char *)ptr, 0, sizeof(rfbStatList)); + ptr->type = type; + /* add to the top of the list */ + ptr->Next = cl->statMsgList; + cl->statMsgList = ptr; + } + return ptr; +} + +void rfbStatRecordEncodingSentAdd(rfbClientPtr cl, uint32_t type, int byteCount) /* Specifically for tight encoding */ +{ + rfbStatList *ptr; + + ptr = rfbStatLookupEncoding(cl, type); + if (ptr!=NULL) + ptr->bytesSent += byteCount; +} + + +void rfbStatRecordEncodingSent(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw) +{ + rfbStatList *ptr; + + ptr = rfbStatLookupEncoding(cl, type); + if (ptr!=NULL) + { + ptr->sentCount++; + ptr->bytesSent += byteCount; + ptr->bytesSentIfRaw += byteIfRaw; + } +} + +void rfbStatRecordEncodingRcvd(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw) +{ + rfbStatList *ptr; + + ptr = rfbStatLookupEncoding(cl, type); + if (ptr!=NULL) + { + ptr->rcvdCount++; + ptr->bytesRcvd += byteCount; + ptr->bytesRcvdIfRaw += byteIfRaw; + } +} + +void rfbStatRecordMessageSent(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw) +{ + rfbStatList *ptr; + + ptr = rfbStatLookupMessage(cl, type); + if (ptr!=NULL) + { + ptr->sentCount++; + ptr->bytesSent += byteCount; + ptr->bytesSentIfRaw += byteIfRaw; + } +} + +void rfbStatRecordMessageRcvd(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw) +{ + rfbStatList *ptr; + + ptr = rfbStatLookupMessage(cl, type); + if (ptr!=NULL) + { + ptr->rcvdCount++; + ptr->bytesRcvd += byteCount; + ptr->bytesRcvdIfRaw += byteIfRaw; + } +} + + +int rfbStatGetSentBytes(rfbClientPtr cl) +{ + rfbStatList *ptr=NULL; + int bytes=0; + if (cl==NULL) return 0; + for (ptr = cl->statMsgList; ptr!=NULL; ptr=ptr->Next) + bytes += ptr->bytesSent; + for (ptr = cl->statEncList; ptr!=NULL; ptr=ptr->Next) + bytes += ptr->bytesSent; + return bytes; +} + +int rfbStatGetSentBytesIfRaw(rfbClientPtr cl) +{ + rfbStatList *ptr=NULL; + int bytes=0; + if (cl==NULL) return 0; + for (ptr = cl->statMsgList; ptr!=NULL; ptr=ptr->Next) + bytes += ptr->bytesSentIfRaw; + for (ptr = cl->statEncList; ptr!=NULL; ptr=ptr->Next) + bytes += ptr->bytesSentIfRaw; + return bytes; +} + +int rfbStatGetRcvdBytes(rfbClientPtr cl) +{ + rfbStatList *ptr=NULL; + int bytes=0; + if (cl==NULL) return 0; + for (ptr = cl->statMsgList; ptr!=NULL; ptr=ptr->Next) + bytes += ptr->bytesRcvd; + for (ptr = cl->statEncList; ptr!=NULL; ptr=ptr->Next) + bytes += ptr->bytesRcvd; + return bytes; +} + +int rfbStatGetRcvdBytesIfRaw(rfbClientPtr cl) +{ + rfbStatList *ptr=NULL; + int bytes=0; + if (cl==NULL) return 0; + for (ptr = cl->statMsgList; ptr!=NULL; ptr=ptr->Next) + bytes += ptr->bytesRcvdIfRaw; + for (ptr = cl->statEncList; ptr!=NULL; ptr=ptr->Next) + bytes += ptr->bytesRcvdIfRaw; + return bytes; +} + +int rfbStatGetMessageCountSent(rfbClientPtr cl, uint32_t type) +{ + rfbStatList *ptr=NULL; + if (cl==NULL) return 0; + for (ptr = cl->statMsgList; ptr!=NULL; ptr=ptr->Next) + if (ptr->type==type) return ptr->sentCount; + return 0; +} +int rfbStatGetMessageCountRcvd(rfbClientPtr cl, uint32_t type) +{ + rfbStatList *ptr=NULL; + if (cl==NULL) return 0; + for (ptr = cl->statMsgList; ptr!=NULL; ptr=ptr->Next) + if (ptr->type==type) return ptr->rcvdCount; + return 0; +} + +int rfbStatGetEncodingCountSent(rfbClientPtr cl, uint32_t type) +{ + rfbStatList *ptr=NULL; + if (cl==NULL) return 0; + for (ptr = cl->statEncList; ptr!=NULL; ptr=ptr->Next) + if (ptr->type==type) return ptr->sentCount; + return 0; +} +int rfbStatGetEncodingCountRcvd(rfbClientPtr cl, uint32_t type) +{ + rfbStatList *ptr=NULL; + if (cl==NULL) return 0; + for (ptr = cl->statEncList; ptr!=NULL; ptr=ptr->Next) + if (ptr->type==type) return ptr->rcvdCount; + return 0; +} + + + + +void rfbResetStats(rfbClientPtr cl) +{ + rfbStatList *ptr; + if (cl==NULL) return; + while (cl->statEncList!=NULL) + { + ptr = cl->statEncList; + cl->statEncList = ptr->Next; + free(ptr); + } + while (cl->statMsgList!=NULL) + { + ptr = cl->statMsgList; + cl->statMsgList = ptr->Next; + free(ptr); + } +} + + +void rfbPrintStats(rfbClientPtr cl) +{ + rfbStatList *ptr=NULL; + char encBuf[64]; + double savings=0.0; + int totalRects=0; + double totalBytes=0.0; + double totalBytesIfRaw=0.0; + + char *name=NULL; + int bytes=0; + int bytesIfRaw=0; + int count=0; + + if (cl==NULL) return; + + rfbLog("%-21.21s %-6.6s %9.9s/%9.9s (%6.6s)\n", "Statistics", "events", "Transmit","RawEquiv","saved"); + for (ptr = cl->statMsgList; ptr!=NULL; ptr=ptr->Next) + { + name = messageNameServer2Client(ptr->type, encBuf, sizeof(encBuf)); + count = ptr->sentCount; + bytes = ptr->bytesSent; + bytesIfRaw = ptr->bytesSentIfRaw; + + savings = 0.0; + if (bytesIfRaw>0.0) + savings = 100.0 - (((double)bytes / (double)bytesIfRaw) * 100.0); + if ((bytes>0) || (count>0) || (bytesIfRaw>0)) + rfbLog(" %-20.20s: %6d | %9d/%9d (%5.1f%%)\n", + name, count, bytes, bytesIfRaw, savings); + totalRects += count; + totalBytes += bytes; + totalBytesIfRaw += bytesIfRaw; + } + + for (ptr = cl->statEncList; ptr!=NULL; ptr=ptr->Next) + { + name = encodingName(ptr->type, encBuf, sizeof(encBuf)); + count = ptr->sentCount; + bytes = ptr->bytesSent; + bytesIfRaw = ptr->bytesSentIfRaw; + savings = 0.0; + + if (bytesIfRaw>0.0) + savings = 100.0 - (((double)bytes / (double)bytesIfRaw) * 100.0); + if ((bytes>0) || (count>0) || (bytesIfRaw>0)) + rfbLog(" %-20.20s: %6d | %9d/%9d (%5.1f%%)\n", + name, count, bytes, bytesIfRaw, savings); + totalRects += count; + totalBytes += bytes; + totalBytesIfRaw += bytesIfRaw; + } + savings=0.0; + if (totalBytesIfRaw>0.0) + savings = 100.0 - ((totalBytes/totalBytesIfRaw)*100.0); + rfbLog(" %-20.20s: %6d | %9.0f/%9.0f (%5.1f%%)\n", + "TOTALS", totalRects, totalBytes,totalBytesIfRaw, savings); + + totalRects=0.0; + totalBytes=0.0; + totalBytesIfRaw=0.0; + + rfbLog("%-21.21s %-6.6s %9.9s/%9.9s (%6.6s)\n", "Statistics", "events", "Received","RawEquiv","saved"); + for (ptr = cl->statMsgList; ptr!=NULL; ptr=ptr->Next) + { + name = messageNameClient2Server(ptr->type, encBuf, sizeof(encBuf)); + count = ptr->rcvdCount; + bytes = ptr->bytesRcvd; + bytesIfRaw = ptr->bytesRcvdIfRaw; + savings = 0.0; + + if (bytesIfRaw>0.0) + savings = 100.0 - (((double)bytes / (double)bytesIfRaw) * 100.0); + if ((bytes>0) || (count>0) || (bytesIfRaw>0)) + rfbLog(" %-20.20s: %6d | %9d/%9d (%5.1f%%)\n", + name, count, bytes, bytesIfRaw, savings); + totalRects += count; + totalBytes += bytes; + totalBytesIfRaw += bytesIfRaw; + } + for (ptr = cl->statEncList; ptr!=NULL; ptr=ptr->Next) + { + name = encodingName(ptr->type, encBuf, sizeof(encBuf)); + count = ptr->rcvdCount; + bytes = ptr->bytesRcvd; + bytesIfRaw = ptr->bytesRcvdIfRaw; + savings = 0.0; + + if (bytesIfRaw>0.0) + savings = 100.0 - (((double)bytes / (double)bytesIfRaw) * 100.0); + if ((bytes>0) || (count>0) || (bytesIfRaw>0)) + rfbLog(" %-20.20s: %6d | %9d/%9d (%5.1f%%)\n", + name, count, bytes, bytesIfRaw, savings); + totalRects += count; + totalBytes += bytes; + totalBytesIfRaw += bytesIfRaw; + } + savings=0.0; + if (totalBytesIfRaw>0.0) + savings = 100.0 - ((totalBytes/totalBytesIfRaw)*100.0); + rfbLog(" %-20.20s: %6d | %9.0f/%9.0f (%5.1f%%)\n", + "TOTALS", totalRects, totalBytes,totalBytesIfRaw, savings); + +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tableinit24.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tableinit24.c new file mode 100644 index 0000000..39e9920 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tableinit24.c @@ -0,0 +1,157 @@ +/* + 24 bit + */ + +/* + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +static void +rfbInitOneRGBTable24 (uint8_t *table, int inMax, int outMax, int outShift,int swap); + + +static void +rfbInitColourMapSingleTable24(char **table, rfbPixelFormat *in, + rfbPixelFormat *out,rfbColourMap* colourMap) +{ + uint32_t i, r, g, b, outValue; + uint8_t *t; + uint8_t c; + unsigned int nEntries = 1 << in->bitsPerPixel; + int shift = colourMap->is16?16:8; + + if (*table) free(*table); + *table = (char *)malloc(nEntries * 3 + 1); + t = (uint8_t *)*table; + + for (i = 0; i < nEntries; i++) { + r = g = b = 0; + if(i < colourMap->count) { + if(colourMap->is16) { + r = colourMap->data.shorts[3*i+0]; + g = colourMap->data.shorts[3*i+1]; + b = colourMap->data.shorts[3*i+2]; + } else { + r = colourMap->data.bytes[3*i+0]; + g = colourMap->data.bytes[3*i+1]; + b = colourMap->data.bytes[3*i+2]; + } + } + outValue = ((((r * (1 + out->redMax)) >> shift) << out->redShift) | + (((g * (1 + out->greenMax)) >> shift) << out->greenShift) | + (((b * (1 + out->blueMax)) >> shift) << out->blueShift)); + *(uint32_t*)&t[3*i] = outValue; + if(!rfbEndianTest) + memmove(t+3*i,t+3*i+1,3); + if (out->bigEndian != in->bigEndian) { + c = t[3*i]; t[3*i] = t[3*i+2]; t[3*i+2] = c; + } + } +} + +/* + * rfbInitTrueColourSingleTable sets up a single lookup table for truecolour + * translation. + */ + +static void +rfbInitTrueColourSingleTable24 (char **table, rfbPixelFormat *in, + rfbPixelFormat *out) +{ + int i,outValue; + int inRed, inGreen, inBlue, outRed, outGreen, outBlue; + uint8_t *t; + uint8_t c; + int nEntries = 1 << in->bitsPerPixel; + + if (*table) free(*table); + *table = (char *)malloc(nEntries * 3 + 1); + t = (uint8_t *)*table; + + for (i = 0; i < nEntries; i++) { + inRed = (i >> in->redShift) & in->redMax; + inGreen = (i >> in->greenShift) & in->greenMax; + inBlue = (i >> in->blueShift) & in->blueMax; + + outRed = (inRed * out->redMax + in->redMax / 2) / in->redMax; + outGreen = (inGreen * out->greenMax + in->greenMax / 2) / in->greenMax; + outBlue = (inBlue * out->blueMax + in->blueMax / 2) / in->blueMax; + + outValue = ((outRed << out->redShift) | + (outGreen << out->greenShift) | + (outBlue << out->blueShift)); + *(uint32_t*)&t[3*i] = outValue; + if(!rfbEndianTest) + memmove(t+3*i,t+3*i+1,3); + if (out->bigEndian != in->bigEndian) { + c = t[3*i]; t[3*i] = t[3*i+2]; t[3*i+2] = c; + } + } +} + + +/* + * rfbInitTrueColourRGBTables sets up three separate lookup tables for the + * red, green and blue values. + */ + +static void +rfbInitTrueColourRGBTables24 (char **table, rfbPixelFormat *in, + rfbPixelFormat *out) +{ + uint8_t *redTable; + uint8_t *greenTable; + uint8_t *blueTable; + + if (*table) free(*table); + *table = (char *)malloc((in->redMax + in->greenMax + in->blueMax + 3) + * 3 + 1); + redTable = (uint8_t *)*table; + greenTable = redTable + 3*(in->redMax + 1); + blueTable = greenTable + 3*(in->greenMax + 1); + + rfbInitOneRGBTable24 (redTable, in->redMax, out->redMax, + out->redShift, (out->bigEndian != in->bigEndian)); + rfbInitOneRGBTable24 (greenTable, in->greenMax, out->greenMax, + out->greenShift, (out->bigEndian != in->bigEndian)); + rfbInitOneRGBTable24 (blueTable, in->blueMax, out->blueMax, + out->blueShift, (out->bigEndian != in->bigEndian)); +} + +static void +rfbInitOneRGBTable24 (uint8_t *table, int inMax, int outMax, int outShift, + int swap) +{ + int i; + int nEntries = inMax + 1; + uint32_t outValue; + uint8_t c; + + for (i = 0; i < nEntries; i++) { + outValue = ((i * outMax + inMax / 2) / inMax) << outShift; + *(uint32_t *)&table[3*i] = outValue; + if(!rfbEndianTest) + memmove(table+3*i,table+3*i+1,3); + if (swap) { + c = table[3*i]; table[3*i] = table[3*i+2]; + table[3*i+2] = c; + } + } +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tableinitcmtemplate.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tableinitcmtemplate.c new file mode 100644 index 0000000..df01b23 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tableinitcmtemplate.c @@ -0,0 +1,84 @@ +/* + * tableinitcmtemplate.c - template for initialising lookup tables for + * translation from a colour map to true colour. + * + * This file shouldn't be compiled. It is included multiple times by + * translate.c, each time with a different definition of the macro OUT. + * For each value of OUT, this file defines a function which allocates an + * appropriately sized lookup table and initialises it. + * + * I know this code isn't nice to read because of all the macros, but + * efficiency is important here. + */ + +/* + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#if !defined(OUT) +#error "This file shouldn't be compiled." +#error "It is included as part of translate.c" +#endif + +#define OUT_T CONCAT3E(uint,OUT,_t) +#define SwapOUT(x) CONCAT2E(Swap,OUT(x)) +#define rfbInitColourMapSingleTableOUT \ + CONCAT2E(rfbInitColourMapSingleTable,OUT) + +static void +rfbInitColourMapSingleTableOUT(char **table, rfbPixelFormat *in, + rfbPixelFormat *out,rfbColourMap* colourMap) +{ + uint32_t i, r, g, b; + OUT_T *t; + uint32_t nEntries = 1 << in->bitsPerPixel; + int shift = colourMap->is16?16:8; + + if (*table) free(*table); + *table = (char *)malloc(nEntries * sizeof(OUT_T)); + t = (OUT_T *)*table; + + for (i = 0; i < nEntries; i++) { + r = g = b = 0; + if(i < colourMap->count) { + if(colourMap->is16) { + r = colourMap->data.shorts[3*i+0]; + g = colourMap->data.shorts[3*i+1]; + b = colourMap->data.shorts[3*i+2]; + } else { + r = colourMap->data.bytes[3*i+0]; + g = colourMap->data.bytes[3*i+1]; + b = colourMap->data.bytes[3*i+2]; + } + } + t[i] = ((((r * (1 + out->redMax)) >> shift) << out->redShift) | + (((g * (1 + out->greenMax)) >> shift) << out->greenShift) | + (((b * (1 + out->blueMax)) >> shift) << out->blueShift)); +#if (OUT != 8) + if (out->bigEndian != in->bigEndian) { + t[i] = SwapOUT(t[i]); + } +#endif + } +} + +#undef OUT_T +#undef SwapOUT +#undef rfbInitColourMapSingleTableOUT diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tableinittctemplate.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tableinittctemplate.c new file mode 100644 index 0000000..8d4f742 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tableinittctemplate.c @@ -0,0 +1,142 @@ +/* + * tableinittctemplate.c - template for initialising lookup tables for + * truecolour to truecolour translation. + * + * This file shouldn't be compiled. It is included multiple times by + * translate.c, each time with a different definition of the macro OUT. + * For each value of OUT, this file defines two functions for initialising + * lookup tables. One is for truecolour translation using a single lookup + * table, the other is for truecolour translation using three separate + * lookup tables for the red, green and blue values. + * + * I know this code isn't nice to read because of all the macros, but + * efficiency is important here. + */ + +/* + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#if !defined(OUT) +#error "This file shouldn't be compiled." +#error "It is included as part of translate.c" +#endif + +#define OUT_T CONCAT3E(uint,OUT,_t) +#define SwapOUT(x) CONCAT2E(Swap,OUT(x)) +#define rfbInitTrueColourSingleTableOUT \ + CONCAT2E(rfbInitTrueColourSingleTable,OUT) +#define rfbInitTrueColourRGBTablesOUT CONCAT2E(rfbInitTrueColourRGBTables,OUT) +#define rfbInitOneRGBTableOUT CONCAT2E(rfbInitOneRGBTable,OUT) + +static void +rfbInitOneRGBTableOUT (OUT_T *table, int inMax, int outMax, int outShift, + int swap); + + +/* + * rfbInitTrueColourSingleTable sets up a single lookup table for truecolour + * translation. + */ + +static void +rfbInitTrueColourSingleTableOUT (char **table, rfbPixelFormat *in, + rfbPixelFormat *out) +{ + int i; + int inRed, inGreen, inBlue, outRed, outGreen, outBlue; + OUT_T *t; + int nEntries = 1 << in->bitsPerPixel; + + if (*table) free(*table); + *table = (char *)malloc(nEntries * sizeof(OUT_T)); + t = (OUT_T *)*table; + + for (i = 0; i < nEntries; i++) { + inRed = (i >> in->redShift) & in->redMax; + inGreen = (i >> in->greenShift) & in->greenMax; + inBlue = (i >> in->blueShift) & in->blueMax; + + outRed = (inRed * out->redMax + in->redMax / 2) / in->redMax; + outGreen = (inGreen * out->greenMax + in->greenMax / 2) / in->greenMax; + outBlue = (inBlue * out->blueMax + in->blueMax / 2) / in->blueMax; + + t[i] = ((outRed << out->redShift) | + (outGreen << out->greenShift) | + (outBlue << out->blueShift)); +#if (OUT != 8) + if (out->bigEndian != in->bigEndian) { + t[i] = SwapOUT(t[i]); + } +#endif + } +} + + +/* + * rfbInitTrueColourRGBTables sets up three separate lookup tables for the + * red, green and blue values. + */ + +static void +rfbInitTrueColourRGBTablesOUT (char **table, rfbPixelFormat *in, + rfbPixelFormat *out) +{ + OUT_T *redTable; + OUT_T *greenTable; + OUT_T *blueTable; + + if (*table) free(*table); + *table = (char *)malloc((in->redMax + in->greenMax + in->blueMax + 3) + * sizeof(OUT_T)); + redTable = (OUT_T *)*table; + greenTable = redTable + in->redMax + 1; + blueTable = greenTable + in->greenMax + 1; + + rfbInitOneRGBTableOUT (redTable, in->redMax, out->redMax, + out->redShift, (out->bigEndian != in->bigEndian)); + rfbInitOneRGBTableOUT (greenTable, in->greenMax, out->greenMax, + out->greenShift, (out->bigEndian != in->bigEndian)); + rfbInitOneRGBTableOUT (blueTable, in->blueMax, out->blueMax, + out->blueShift, (out->bigEndian != in->bigEndian)); +} + +static void +rfbInitOneRGBTableOUT (OUT_T *table, int inMax, int outMax, int outShift, + int swap) +{ + int i; + int nEntries = inMax + 1; + + for (i = 0; i < nEntries; i++) { + table[i] = ((i * outMax + inMax / 2) / inMax) << outShift; +#if (OUT != 8) + if (swap) { + table[i] = SwapOUT(table[i]); + } +#endif + } +} + +#undef OUT_T +#undef SwapOUT +#undef rfbInitTrueColourSingleTableOUT +#undef rfbInitTrueColourRGBTablesOUT +#undef rfbInitOneRGBTableOUT diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tabletrans24template.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tabletrans24template.c new file mode 100644 index 0000000..4b3a0a0 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tabletrans24template.c @@ -0,0 +1,281 @@ +/* + * tabletranstemplate.c - template for translation using lookup tables. + * + * This file shouldn't be compiled. It is included multiple times by + * translate.c, each time with different definitions of the macros IN and OUT. + * + * For each pair of values IN and OUT, this file defines two functions for + * translating a given rectangle of pixel data. One uses a single lookup + * table, and the other uses three separate lookup tables for the red, green + * and blue values. + * + * I know this code isn't nice to read because of all the macros, but + * efficiency is important here. + */ + +/* + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#if !defined(BPP) +#error "This file shouldn't be compiled." +#error "It is included as part of translate.c" +#endif + +#if BPP == 24 + +/* + * rfbTranslateWithSingleTableINtoOUT translates a rectangle of pixel data + * using a single lookup table. + */ + +static void +rfbTranslateWithSingleTable24to24 (char *table, rfbPixelFormat *in, + rfbPixelFormat *out, + char *iptr, char *optr, + int bytesBetweenInputLines, + int width, int height) +{ + uint8_t *ip = (uint8_t *)iptr; + uint8_t *op = (uint8_t *)optr; + int ipextra = bytesBetweenInputLines - width * 3; + uint8_t *opLineEnd; + uint8_t *t = (uint8_t *)table; + int shift = rfbEndianTest?0:8; + uint8_t c; + + while (height > 0) { + opLineEnd = op + width*3; + + while (op < opLineEnd) { + *(uint32_t*)op = t[((*(uint32_t *)ip)>>shift)&0x00ffffff]; + if(!rfbEndianTest) + memmove(op,op+1,3); + if (out->bigEndian != in->bigEndian) { + c = op[0]; op[0] = op[2]; op[2] = c; + } + op += 3; + ip += 3; + } + + ip += ipextra; + height--; + } +} + +/* + * rfbTranslateWithRGBTablesINtoOUT translates a rectangle of pixel data + * using three separate lookup tables for the red, green and blue values. + */ + +static void +rfbTranslateWithRGBTables24to24 (char *table, rfbPixelFormat *in, + rfbPixelFormat *out, + char *iptr, char *optr, + int bytesBetweenInputLines, + int width, int height) +{ + uint8_t *ip = (uint8_t *)iptr; + uint8_t *op = (uint8_t *)optr; + int ipextra = bytesBetweenInputLines - width*3; + uint8_t *opLineEnd; + uint8_t *redTable = (uint8_t *)table; + uint8_t *greenTable = redTable + 3*(in->redMax + 1); + uint8_t *blueTable = greenTable + 3*(in->greenMax + 1); + uint32_t outValue,inValue; + int shift = rfbEndianTest?0:8; + + while (height > 0) { + opLineEnd = op+3*width; + + while (op < opLineEnd) { + inValue = ((*(uint32_t *)ip)>>shift)&0x00ffffff; + outValue = (redTable[(inValue >> in->redShift) & in->redMax] | + greenTable[(inValue >> in->greenShift) & in->greenMax] | + blueTable[(inValue >> in->blueShift) & in->blueMax]); + memcpy(op,&outValue,3); + op += 3; + ip+=3; + } + ip += ipextra; + height--; + } +} + +#else + +#define IN_T CONCAT3E(uint,BPP,_t) +#define OUT_T CONCAT3E(uint,BPP,_t) +#define rfbTranslateWithSingleTable24toOUT \ + CONCAT4E(rfbTranslateWithSingleTable,24,to,BPP) +#define rfbTranslateWithSingleTableINto24 \ + CONCAT4E(rfbTranslateWithSingleTable,BPP,to,24) +#define rfbTranslateWithRGBTables24toOUT \ + CONCAT4E(rfbTranslateWithRGBTables,24,to,BPP) +#define rfbTranslateWithRGBTablesINto24 \ + CONCAT4E(rfbTranslateWithRGBTables,BPP,to,24) + +/* + * rfbTranslateWithSingleTableINtoOUT translates a rectangle of pixel data + * using a single lookup table. + */ + +static void +rfbTranslateWithSingleTable24toOUT (char *table, rfbPixelFormat *in, + rfbPixelFormat *out, + char *iptr, char *optr, + int bytesBetweenInputLines, + int width, int height) +{ + uint8_t *ip = (uint8_t *)iptr; + OUT_T *op = (OUT_T *)optr; + int ipextra = bytesBetweenInputLines - width*3; + OUT_T *opLineEnd; + OUT_T *t = (OUT_T *)table; + int shift = rfbEndianTest?0:8; + + while (height > 0) { + opLineEnd = op + width; + + while (op < opLineEnd) { + *(op++) = t[((*(uint32_t *)ip)>>shift)&0x00ffffff]; + ip+=3; + } + + ip += ipextra; + height--; + } +} + + +/* + * rfbTranslateWithRGBTablesINtoOUT translates a rectangle of pixel data + * using three separate lookup tables for the red, green and blue values. + */ + +static void +rfbTranslateWithRGBTables24toOUT (char *table, rfbPixelFormat *in, + rfbPixelFormat *out, + char *iptr, char *optr, + int bytesBetweenInputLines, + int width, int height) +{ + uint8_t *ip = (uint8_t *)iptr; + OUT_T *op = (OUT_T *)optr; + int ipextra = bytesBetweenInputLines - width*3; + OUT_T *opLineEnd; + OUT_T *redTable = (OUT_T *)table; + OUT_T *greenTable = redTable + in->redMax + 1; + OUT_T *blueTable = greenTable + in->greenMax + 1; + uint32_t inValue; + int shift = rfbEndianTest?0:8; + + while (height > 0) { + opLineEnd = &op[width]; + + while (op < opLineEnd) { + inValue = ((*(uint32_t *)ip)>>shift)&0x00ffffff; + *(op++) = (redTable[(inValue >> in->redShift) & in->redMax] | + greenTable[(inValue >> in->greenShift) & in->greenMax] | + blueTable[(inValue >> in->blueShift) & in->blueMax]); + ip+=3; + } + ip += ipextra; + height--; + } +} + +/* + * rfbTranslateWithSingleTableINto24 translates a rectangle of pixel data + * using a single lookup table. + */ + +static void +rfbTranslateWithSingleTableINto24 (char *table, rfbPixelFormat *in, + rfbPixelFormat *out, + char *iptr, char *optr, + int bytesBetweenInputLines, + int width, int height) +{ + IN_T *ip = (IN_T *)iptr; + uint8_t *op = (uint8_t *)optr; + int ipextra = bytesBetweenInputLines / sizeof(IN_T) - width; + uint8_t *opLineEnd; + uint8_t *t = (uint8_t *)table; + + while (height > 0) { + opLineEnd = op + width * 3; + + while (op < opLineEnd) { + memcpy(op,&t[3*(*(ip++))],3); + op += 3; + } + + ip += ipextra; + height--; + } +} + + +/* + * rfbTranslateWithRGBTablesINto24 translates a rectangle of pixel data + * using three separate lookup tables for the red, green and blue values. + */ + +static void +rfbTranslateWithRGBTablesINto24 (char *table, rfbPixelFormat *in, + rfbPixelFormat *out, + char *iptr, char *optr, + int bytesBetweenInputLines, + int width, int height) +{ + IN_T *ip = (IN_T *)iptr; + uint8_t *op = (uint8_t *)optr; + int ipextra = bytesBetweenInputLines / sizeof(IN_T) - width; + uint8_t *opLineEnd; + uint8_t *redTable = (uint8_t *)table; + uint8_t *greenTable = redTable + 3*(in->redMax + 1); + uint8_t *blueTable = greenTable + 3*(in->greenMax + 1); + uint32_t outValue; + + while (height > 0) { + opLineEnd = op+3*width; + + while (op < opLineEnd) { + outValue = (redTable[(*ip >> in->redShift) & in->redMax] | + greenTable[(*ip >> in->greenShift) & in->greenMax] | + blueTable[(*ip >> in->blueShift) & in->blueMax]); + memcpy(op,&outValue,3); + op += 3; + ip++; + } + ip += ipextra; + height--; + } +} + +#undef IN_T +#undef OUT_T +#undef rfbTranslateWithSingleTable24toOUT +#undef rfbTranslateWithRGBTables24toOUT +#undef rfbTranslateWithSingleTableINto24 +#undef rfbTranslateWithRGBTablesINto24 + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tabletranstemplate.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tabletranstemplate.c new file mode 100644 index 0000000..e83c623 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tabletranstemplate.c @@ -0,0 +1,117 @@ +/* + * tabletranstemplate.c - template for translation using lookup tables. + * + * This file shouldn't be compiled. It is included multiple times by + * translate.c, each time with different definitions of the macros IN and OUT. + * + * For each pair of values IN and OUT, this file defines two functions for + * translating a given rectangle of pixel data. One uses a single lookup + * table, and the other uses three separate lookup tables for the red, green + * and blue values. + * + * I know this code isn't nice to read because of all the macros, but + * efficiency is important here. + */ + +/* + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#if !defined(IN) || !defined(OUT) +#error "This file shouldn't be compiled." +#error "It is included as part of translate.c" +#endif + +#define IN_T CONCAT3E(uint,IN,_t) +#define OUT_T CONCAT3E(uint,OUT,_t) +#define rfbTranslateWithSingleTableINtoOUT \ + CONCAT4E(rfbTranslateWithSingleTable,IN,to,OUT) +#define rfbTranslateWithRGBTablesINtoOUT \ + CONCAT4E(rfbTranslateWithRGBTables,IN,to,OUT) + +/* + * rfbTranslateWithSingleTableINtoOUT translates a rectangle of pixel data + * using a single lookup table. + */ + +static void +rfbTranslateWithSingleTableINtoOUT (char *table, rfbPixelFormat *in, + rfbPixelFormat *out, + char *iptr, char *optr, + int bytesBetweenInputLines, + int width, int height) +{ + IN_T *ip = (IN_T *)iptr; + OUT_T *op = (OUT_T *)optr; + int ipextra = bytesBetweenInputLines / sizeof(IN_T) - width; + OUT_T *opLineEnd; + OUT_T *t = (OUT_T *)table; + + while (height > 0) { + opLineEnd = op + width; + + while (op < opLineEnd) { + *(op++) = t[*(ip++)]; + } + + ip += ipextra; + height--; + } +} + + +/* + * rfbTranslateWithRGBTablesINtoOUT translates a rectangle of pixel data + * using three separate lookup tables for the red, green and blue values. + */ + +static void +rfbTranslateWithRGBTablesINtoOUT (char *table, rfbPixelFormat *in, + rfbPixelFormat *out, + char *iptr, char *optr, + int bytesBetweenInputLines, + int width, int height) +{ + IN_T *ip = (IN_T *)iptr; + OUT_T *op = (OUT_T *)optr; + int ipextra = bytesBetweenInputLines / sizeof(IN_T) - width; + OUT_T *opLineEnd; + OUT_T *redTable = (OUT_T *)table; + OUT_T *greenTable = redTable + in->redMax + 1; + OUT_T *blueTable = greenTable + in->greenMax + 1; + + while (height > 0) { + opLineEnd = &op[width]; + + while (op < opLineEnd) { + *(op++) = (redTable[(*ip >> in->redShift) & in->redMax] | + greenTable[(*ip >> in->greenShift) & in->greenMax] | + blueTable[(*ip >> in->blueShift) & in->blueMax]); + ip++; + } + ip += ipextra; + height--; + } +} + +#undef IN_T +#undef OUT_T +#undef rfbTranslateWithSingleTableINtoOUT +#undef rfbTranslateWithRGBTablesINtoOUT diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tight.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tight.c new file mode 100644 index 0000000..6d5bcbb --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tight.c @@ -0,0 +1,1900 @@ +/* + * tight.c + * + * Routines to implement Tight Encoding + * + * Our Tight encoder is based roughly on the TurboVNC v0.6 encoder with some + * additional enhancements from TurboVNC 1.1. For lower compression levels, + * this encoder provides a tremendous reduction in CPU usage (and subsequently, + * an increase in throughput for CPU-limited environments) relative to the + * TightVNC encoder, whereas Compression Level 9 provides a low-bandwidth mode + * that behaves similarly to Compression Levels 5-9 in the old TightVNC + * encoder. + */ + +/* + * Copyright (C) 2010-2012 D. R. Commander. All Rights Reserved. + * Copyright (C) 2005-2008 Sun Microsystems, Inc. All Rights Reserved. + * Copyright (C) 2004 Landmark Graphics Corporation. All Rights Reserved. + * Copyright (C) 2000, 2001 Const Kaplinsky. All Rights Reserved. + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include +#include "private.h" + +#ifdef LIBVNCSERVER_HAVE_LIBPNG +#include +#endif +#include "turbojpeg.h" + + +/* Note: The following constant should not be changed. */ +#define TIGHT_MIN_TO_COMPRESS 12 + +/* The parameters below may be adjusted. */ +#define MIN_SPLIT_RECT_SIZE 4096 +#define MIN_SOLID_SUBRECT_SIZE 2048 +#define MAX_SPLIT_TILE_SIZE 16 + +/* + * There is so much access of the Tight encoding static data buffers + * that we resort to using thread local storage instead of having + * per-client data. + */ +#if LIBVNCSERVER_HAVE_LIBPTHREAD && LIBVNCSERVER_HAVE_TLS && !defined(TLS) && defined(__linux__) +#define TLS __thread +#endif +#ifndef TLS +#define TLS +#endif + +/* This variable is set on every rfbSendRectEncodingTight() call. */ +static TLS rfbBool usePixelFormat24 = FALSE; + + +/* Compression level stuff. The following array contains various + encoder parameters for each of 10 compression levels (0..9). + Last three parameters correspond to JPEG quality levels (0..9). */ + +typedef struct TIGHT_CONF_s { + int maxRectSize, maxRectWidth; + int monoMinRectSize; + int idxZlibLevel, monoZlibLevel, rawZlibLevel; + int idxMaxColorsDivisor; + int palMaxColorsWithJPEG; +} TIGHT_CONF; + +static TIGHT_CONF tightConf[4] = { + { 65536, 2048, 6, 0, 0, 0, 4, 24 }, // 0 (used only without JPEG) + { 65536, 2048, 32, 1, 1, 1, 96, 24 }, // 1 + { 65536, 2048, 32, 3, 3, 2, 96, 96 }, // 2 (used only with JPEG) + { 65536, 2048, 32, 7, 7, 5, 96, 256 } // 9 +}; + +#ifdef LIBVNCSERVER_HAVE_LIBPNG +typedef struct TIGHT_PNG_CONF_s { + int png_zlib_level, png_filters; +} TIGHT_PNG_CONF; + +static TIGHT_PNG_CONF tightPngConf[10] = { + { 0, PNG_NO_FILTERS }, + { 1, PNG_NO_FILTERS }, + { 2, PNG_NO_FILTERS }, + { 3, PNG_NO_FILTERS }, + { 4, PNG_NO_FILTERS }, + { 5, PNG_ALL_FILTERS }, + { 6, PNG_ALL_FILTERS }, + { 7, PNG_ALL_FILTERS }, + { 8, PNG_ALL_FILTERS }, + { 9, PNG_ALL_FILTERS }, +}; +#endif + +static TLS int compressLevel = 1; +static TLS int qualityLevel = 95; +static TLS int subsampLevel = TJ_444; + +static const int subsampLevel2tjsubsamp[4] = { + TJ_444, TJ_420, TJ_422, TJ_GRAYSCALE +}; + + +/* Stuff dealing with palettes. */ + +typedef struct COLOR_LIST_s { + struct COLOR_LIST_s *next; + int idx; + uint32_t rgb; +} COLOR_LIST; + +typedef struct PALETTE_ENTRY_s { + COLOR_LIST *listNode; + int numPixels; +} PALETTE_ENTRY; + +typedef struct PALETTE_s { + PALETTE_ENTRY entry[256]; + COLOR_LIST *hash[256]; + COLOR_LIST list[256]; +} PALETTE; + +/* TODO: move into rfbScreen struct */ +static TLS int paletteNumColors = 0; +static TLS int paletteMaxColors = 0; +static TLS uint32_t monoBackground = 0; +static TLS uint32_t monoForeground = 0; +static TLS PALETTE palette; + +/* Pointers to dynamically-allocated buffers. */ + +static TLS int tightBeforeBufSize = 0; +static TLS char *tightBeforeBuf = NULL; + +static TLS int tightAfterBufSize = 0; +static TLS char *tightAfterBuf = NULL; + +static TLS tjhandle j = NULL; + +void rfbTightCleanup (rfbScreenInfoPtr screen) +{ + if (tightBeforeBufSize) { + free (tightBeforeBuf); + tightBeforeBufSize = 0; + tightBeforeBuf = NULL; + } + if (tightAfterBufSize) { + free (tightAfterBuf); + tightAfterBufSize = 0; + tightAfterBuf = NULL; + } + if (j) tjDestroy(j); +} + + +/* Prototypes for static functions. */ + +static rfbBool SendRectEncodingTight(rfbClientPtr cl, int x, int y, + int w, int h); +static void FindBestSolidArea (rfbClientPtr cl, int x, int y, int w, int h, + uint32_t colorValue, int *w_ptr, int *h_ptr); +static void ExtendSolidArea (rfbClientPtr cl, int x, int y, int w, int h, + uint32_t colorValue, + int *x_ptr, int *y_ptr, int *w_ptr, int *h_ptr); +static rfbBool CheckSolidTile (rfbClientPtr cl, int x, int y, int w, int h, + uint32_t *colorPtr, rfbBool needSameColor); +static rfbBool CheckSolidTile8 (rfbClientPtr cl, int x, int y, int w, int h, + uint32_t *colorPtr, rfbBool needSameColor); +static rfbBool CheckSolidTile16 (rfbClientPtr cl, int x, int y, int w, int h, + uint32_t *colorPtr, rfbBool needSameColor); +static rfbBool CheckSolidTile32 (rfbClientPtr cl, int x, int y, int w, int h, + uint32_t *colorPtr, rfbBool needSameColor); + +static rfbBool SendRectSimple (rfbClientPtr cl, int x, int y, int w, int h); +static rfbBool SendSubrect (rfbClientPtr cl, int x, int y, int w, int h); +static rfbBool SendTightHeader (rfbClientPtr cl, int x, int y, int w, int h); + +static rfbBool SendSolidRect (rfbClientPtr cl); +static rfbBool SendMonoRect (rfbClientPtr cl, int x, int y, int w, int h); +static rfbBool SendIndexedRect (rfbClientPtr cl, int x, int y, int w, int h); +static rfbBool SendFullColorRect (rfbClientPtr cl, int x, int y, int w, int h); + +static rfbBool CompressData (rfbClientPtr cl, int streamId, int dataLen, + int zlibLevel, int zlibStrategy); +static rfbBool SendCompressedData (rfbClientPtr cl, char *buf, + int compressedLen); + +static void FillPalette8 (int count); +static void FillPalette16 (int count); +static void FillPalette32 (int count); +static void FastFillPalette16 (rfbClientPtr cl, uint16_t *data, int w, + int pitch, int h); +static void FastFillPalette32 (rfbClientPtr cl, uint32_t *data, int w, + int pitch, int h); + +static void PaletteReset (void); +static int PaletteInsert (uint32_t rgb, int numPixels, int bpp); + +static void Pack24 (rfbClientPtr cl, char *buf, rfbPixelFormat *fmt, + int count); + +static void EncodeIndexedRect16 (uint8_t *buf, int count); +static void EncodeIndexedRect32 (uint8_t *buf, int count); + +static void EncodeMonoRect8 (uint8_t *buf, int w, int h); +static void EncodeMonoRect16 (uint8_t *buf, int w, int h); +static void EncodeMonoRect32 (uint8_t *buf, int w, int h); + +static rfbBool SendJpegRect (rfbClientPtr cl, int x, int y, int w, int h, + int quality); +static void PrepareRowForImg(rfbClientPtr cl, uint8_t *dst, int x, int y, int count); +static void PrepareRowForImg24(rfbClientPtr cl, uint8_t *dst, int x, int y, int count); +static void PrepareRowForImg16(rfbClientPtr cl, uint8_t *dst, int x, int y, int count); +static void PrepareRowForImg32(rfbClientPtr cl, uint8_t *dst, int x, int y, int count); + +#ifdef LIBVNCSERVER_HAVE_LIBPNG +static rfbBool SendPngRect(rfbClientPtr cl, int x, int y, int w, int h); +static rfbBool CanSendPngRect(rfbClientPtr cl, int w, int h); +#endif + +/* + * Tight encoding implementation. + */ + +int +rfbNumCodedRectsTight(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + int maxRectSize, maxRectWidth; + int subrectMaxWidth, subrectMaxHeight; + + /* No matter how many rectangles we will send if LastRect markers + are used to terminate rectangle stream. */ + if (cl->enableLastRectEncoding && w * h >= MIN_SPLIT_RECT_SIZE) + return 0; + + maxRectSize = tightConf[compressLevel].maxRectSize; + maxRectWidth = tightConf[compressLevel].maxRectWidth; + + if (w > maxRectWidth || w * h > maxRectSize) { + subrectMaxWidth = (w > maxRectWidth) ? maxRectWidth : w; + subrectMaxHeight = maxRectSize / subrectMaxWidth; + return (((w - 1) / maxRectWidth + 1) * + ((h - 1) / subrectMaxHeight + 1)); + } else { + return 1; + } +} + +rfbBool +rfbSendRectEncodingTight(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + cl->tightEncoding = rfbEncodingTight; + return SendRectEncodingTight(cl, x, y, w, h); +} + +rfbBool +rfbSendRectEncodingTightPng(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + cl->tightEncoding = rfbEncodingTightPng; + return SendRectEncodingTight(cl, x, y, w, h); +} + + +rfbBool +SendRectEncodingTight(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + int nMaxRows; + uint32_t colorValue; + int dx, dy, dw, dh; + int x_best, y_best, w_best, h_best; + char *fbptr; + + rfbSendUpdateBuf(cl); + + compressLevel = cl->tightCompressLevel; + qualityLevel = cl->turboQualityLevel; + subsampLevel = cl->turboSubsampLevel; + + /* We only allow compression levels that have a demonstrable performance + benefit. CL 0 with JPEG reduces CPU usage for workloads that have low + numbers of unique colors, but the same thing can be accomplished by + using CL 0 without JPEG (AKA "Lossless Tight.") For those same + low-color workloads, CL 2 can provide typically 20-40% better + compression than CL 1 (with a commensurate increase in CPU usage.) For + high-color workloads, CL 1 should always be used, as higher compression + levels increase CPU usage for these workloads without providing any + significant reduction in bandwidth. */ + if (qualityLevel != -1) { + if (compressLevel < 1) compressLevel = 1; + if (compressLevel > 2) compressLevel = 2; + } + + /* With JPEG disabled, CL 2 offers no significant bandwidth savings over + CL 1, so we don't include it. */ + else if (compressLevel > 1) compressLevel = 1; + + /* CL 9 (which maps internally to CL 3) is included mainly for backward + compatibility with TightVNC Compression Levels 5-9. It should be used + only in extremely low-bandwidth cases in which it can be shown to have a + benefit. For low-color workloads, it provides typically only 10-20% + better compression than CL 2 with JPEG and CL 1 without JPEG, and it + uses, on average, twice as much CPU time. */ + if (cl->tightCompressLevel == 9) compressLevel = 3; + + if ( cl->format.depth == 24 && cl->format.redMax == 0xFF && + cl->format.greenMax == 0xFF && cl->format.blueMax == 0xFF ) { + usePixelFormat24 = TRUE; + } else { + usePixelFormat24 = FALSE; + } + + if (!cl->enableLastRectEncoding || w * h < MIN_SPLIT_RECT_SIZE) + return SendRectSimple(cl, x, y, w, h); + + /* Make sure we can write at least one pixel into tightBeforeBuf. */ + + if (tightBeforeBufSize < 4) { + tightBeforeBufSize = 4; + if (tightBeforeBuf == NULL) + tightBeforeBuf = (char *)malloc(tightBeforeBufSize); + else + tightBeforeBuf = (char *)realloc(tightBeforeBuf, + tightBeforeBufSize); + } + + /* Calculate maximum number of rows in one non-solid rectangle. */ + + { + int maxRectSize, maxRectWidth, nMaxWidth; + + maxRectSize = tightConf[compressLevel].maxRectSize; + maxRectWidth = tightConf[compressLevel].maxRectWidth; + nMaxWidth = (w > maxRectWidth) ? maxRectWidth : w; + nMaxRows = maxRectSize / nMaxWidth; + } + + /* Try to find large solid-color areas and send them separately. */ + + for (dy = y; dy < y + h; dy += MAX_SPLIT_TILE_SIZE) { + + /* If a rectangle becomes too large, send its upper part now. */ + + if (dy - y >= nMaxRows) { + if (!SendRectSimple(cl, x, y, w, nMaxRows)) + return 0; + y += nMaxRows; + h -= nMaxRows; + } + + dh = (dy + MAX_SPLIT_TILE_SIZE <= y + h) ? + MAX_SPLIT_TILE_SIZE : (y + h - dy); + + for (dx = x; dx < x + w; dx += MAX_SPLIT_TILE_SIZE) { + + dw = (dx + MAX_SPLIT_TILE_SIZE <= x + w) ? + MAX_SPLIT_TILE_SIZE : (x + w - dx); + + if (CheckSolidTile(cl, dx, dy, dw, dh, &colorValue, FALSE)) { + + if (subsampLevel == TJ_GRAYSCALE && qualityLevel != -1) { + uint32_t r = (colorValue >> 16) & 0xFF; + uint32_t g = (colorValue >> 8) & 0xFF; + uint32_t b = (colorValue) & 0xFF; + double y = (0.257 * (double)r) + (0.504 * (double)g) + + (0.098 * (double)b) + 16.; + colorValue = (int)y + (((int)y) << 8) + (((int)y) << 16); + } + + /* Get dimensions of solid-color area. */ + + FindBestSolidArea(cl, dx, dy, w - (dx - x), h - (dy - y), + colorValue, &w_best, &h_best); + + /* Make sure a solid rectangle is large enough + (or the whole rectangle is of the same color). */ + + if ( w_best * h_best != w * h && + w_best * h_best < MIN_SOLID_SUBRECT_SIZE ) + continue; + + /* Try to extend solid rectangle to maximum size. */ + + x_best = dx; y_best = dy; + ExtendSolidArea(cl, x, y, w, h, colorValue, + &x_best, &y_best, &w_best, &h_best); + + /* Send rectangles at top and left to solid-color area. */ + + if ( y_best != y && + !SendRectSimple(cl, x, y, w, y_best-y) ) + return FALSE; + if ( x_best != x && + !SendRectEncodingTight(cl, x, y_best, + x_best-x, h_best) ) + return FALSE; + + /* Send solid-color rectangle. */ + + if (!SendTightHeader(cl, x_best, y_best, w_best, h_best)) + return FALSE; + + fbptr = (cl->scaledScreen->frameBuffer + + (cl->scaledScreen->paddedWidthInBytes * y_best) + + (x_best * (cl->scaledScreen->bitsPerPixel / 8))); + + (*cl->translateFn)(cl->translateLookupTable, &cl->screen->serverFormat, + &cl->format, fbptr, tightBeforeBuf, + cl->scaledScreen->paddedWidthInBytes, 1, 1); + + if (!SendSolidRect(cl)) + return FALSE; + + /* Send remaining rectangles (at right and bottom). */ + + if ( x_best + w_best != x + w && + !SendRectEncodingTight(cl, x_best + w_best, y_best, + w - (x_best-x) - w_best, h_best) ) + return FALSE; + if ( y_best + h_best != y + h && + !SendRectEncodingTight(cl, x, y_best + h_best, + w, h - (y_best-y) - h_best) ) + return FALSE; + + /* Return after all recursive calls are done. */ + + return TRUE; + } + + } + + } + + /* No suitable solid-color rectangles found. */ + + return SendRectSimple(cl, x, y, w, h); +} + + +static void +FindBestSolidArea(rfbClientPtr cl, + int x, + int y, + int w, + int h, + uint32_t colorValue, + int *w_ptr, + int *h_ptr) +{ + int dx, dy, dw, dh; + int w_prev; + int w_best = 0, h_best = 0; + + w_prev = w; + + for (dy = y; dy < y + h; dy += MAX_SPLIT_TILE_SIZE) { + + dh = (dy + MAX_SPLIT_TILE_SIZE <= y + h) ? + MAX_SPLIT_TILE_SIZE : (y + h - dy); + dw = (w_prev > MAX_SPLIT_TILE_SIZE) ? + MAX_SPLIT_TILE_SIZE : w_prev; + + if (!CheckSolidTile(cl, x, dy, dw, dh, &colorValue, TRUE)) + break; + + for (dx = x + dw; dx < x + w_prev;) { + dw = (dx + MAX_SPLIT_TILE_SIZE <= x + w_prev) ? + MAX_SPLIT_TILE_SIZE : (x + w_prev - dx); + if (!CheckSolidTile(cl, dx, dy, dw, dh, &colorValue, TRUE)) + break; + dx += dw; + } + + w_prev = dx - x; + if (w_prev * (dy + dh - y) > w_best * h_best) { + w_best = w_prev; + h_best = dy + dh - y; + } + } + + *w_ptr = w_best; + *h_ptr = h_best; +} + + +static void +ExtendSolidArea(rfbClientPtr cl, + int x, + int y, + int w, + int h, + uint32_t colorValue, + int *x_ptr, + int *y_ptr, + int *w_ptr, + int *h_ptr) +{ + int cx, cy; + + /* Try to extend the area upwards. */ + for ( cy = *y_ptr - 1; + cy >= y && CheckSolidTile(cl, *x_ptr, cy, *w_ptr, 1, &colorValue, TRUE); + cy-- ); + *h_ptr += *y_ptr - (cy + 1); + *y_ptr = cy + 1; + + /* ... downwards. */ + for ( cy = *y_ptr + *h_ptr; + cy < y + h && + CheckSolidTile(cl, *x_ptr, cy, *w_ptr, 1, &colorValue, TRUE); + cy++ ); + *h_ptr += cy - (*y_ptr + *h_ptr); + + /* ... to the left. */ + for ( cx = *x_ptr - 1; + cx >= x && CheckSolidTile(cl, cx, *y_ptr, 1, *h_ptr, &colorValue, TRUE); + cx-- ); + *w_ptr += *x_ptr - (cx + 1); + *x_ptr = cx + 1; + + /* ... to the right. */ + for ( cx = *x_ptr + *w_ptr; + cx < x + w && + CheckSolidTile(cl, cx, *y_ptr, 1, *h_ptr, &colorValue, TRUE); + cx++ ); + *w_ptr += cx - (*x_ptr + *w_ptr); +} + + +/* + * Check if a rectangle is all of the same color. If needSameColor is + * set to non-zero, then also check that its color equals to the + * *colorPtr value. The result is 1 if the test is successfull, and in + * that case new color will be stored in *colorPtr. + */ + +static rfbBool CheckSolidTile(rfbClientPtr cl, int x, int y, int w, int h, uint32_t* colorPtr, rfbBool needSameColor) +{ + switch(cl->screen->serverFormat.bitsPerPixel) { + case 32: + return CheckSolidTile32(cl, x, y, w, h, colorPtr, needSameColor); + case 16: + return CheckSolidTile16(cl, x, y, w, h, colorPtr, needSameColor); + default: + return CheckSolidTile8(cl, x, y, w, h, colorPtr, needSameColor); + } +} + + +#define DEFINE_CHECK_SOLID_FUNCTION(bpp) \ + \ +static rfbBool \ +CheckSolidTile##bpp(rfbClientPtr cl, int x, int y, int w, int h, \ + uint32_t* colorPtr, rfbBool needSameColor) \ +{ \ + uint##bpp##_t *fbptr; \ + uint##bpp##_t colorValue; \ + int dx, dy; \ + \ + fbptr = (uint##bpp##_t *)&cl->scaledScreen->frameBuffer \ + [y * cl->scaledScreen->paddedWidthInBytes + x * (bpp/8)]; \ + \ + colorValue = *fbptr; \ + if (needSameColor && (uint32_t)colorValue != *colorPtr) \ + return FALSE; \ + \ + for (dy = 0; dy < h; dy++) { \ + for (dx = 0; dx < w; dx++) { \ + if (colorValue != fbptr[dx]) \ + return FALSE; \ + } \ + fbptr = (uint##bpp##_t *)((uint8_t *)fbptr \ + + cl->scaledScreen->paddedWidthInBytes); \ + } \ + \ + *colorPtr = (uint32_t)colorValue; \ + return TRUE; \ +} + +DEFINE_CHECK_SOLID_FUNCTION(8) +DEFINE_CHECK_SOLID_FUNCTION(16) +DEFINE_CHECK_SOLID_FUNCTION(32) + +static rfbBool +SendRectSimple(rfbClientPtr cl, int x, int y, int w, int h) +{ + int maxBeforeSize, maxAfterSize; + int maxRectSize, maxRectWidth; + int subrectMaxWidth, subrectMaxHeight; + int dx, dy; + int rw, rh; + + maxRectSize = tightConf[compressLevel].maxRectSize; + maxRectWidth = tightConf[compressLevel].maxRectWidth; + + maxBeforeSize = maxRectSize * (cl->format.bitsPerPixel / 8); + maxAfterSize = maxBeforeSize + (maxBeforeSize + 99) / 100 + 12; + + if (tightBeforeBufSize < maxBeforeSize) { + tightBeforeBufSize = maxBeforeSize; + if (tightBeforeBuf == NULL) + tightBeforeBuf = (char *)malloc(tightBeforeBufSize); + else + tightBeforeBuf = (char *)realloc(tightBeforeBuf, + tightBeforeBufSize); + } + + if (tightAfterBufSize < maxAfterSize) { + tightAfterBufSize = maxAfterSize; + if (tightAfterBuf == NULL) + tightAfterBuf = (char *)malloc(tightAfterBufSize); + else + tightAfterBuf = (char *)realloc(tightAfterBuf, + tightAfterBufSize); + } + + if (w > maxRectWidth || w * h > maxRectSize) { + subrectMaxWidth = (w > maxRectWidth) ? maxRectWidth : w; + subrectMaxHeight = maxRectSize / subrectMaxWidth; + + for (dy = 0; dy < h; dy += subrectMaxHeight) { + for (dx = 0; dx < w; dx += maxRectWidth) { + rw = (dx + maxRectWidth < w) ? maxRectWidth : w - dx; + rh = (dy + subrectMaxHeight < h) ? subrectMaxHeight : h - dy; + if (!SendSubrect(cl, x + dx, y + dy, rw, rh)) + return FALSE; + } + } + } else { + if (!SendSubrect(cl, x, y, w, h)) + return FALSE; + } + + return TRUE; +} + +static rfbBool +SendSubrect(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + char *fbptr; + rfbBool success = FALSE; + + /* Send pending data if there is more than 128 bytes. */ + if (cl->ublen > 128) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + if (!SendTightHeader(cl, x, y, w, h)) + return FALSE; + + fbptr = (cl->scaledScreen->frameBuffer + + (cl->scaledScreen->paddedWidthInBytes * y) + + (x * (cl->scaledScreen->bitsPerPixel / 8))); + + if (subsampLevel == TJ_GRAYSCALE && qualityLevel != -1) + return SendJpegRect(cl, x, y, w, h, qualityLevel); + + paletteMaxColors = w * h / tightConf[compressLevel].idxMaxColorsDivisor; + if(qualityLevel != -1) + paletteMaxColors = tightConf[compressLevel].palMaxColorsWithJPEG; + if ( paletteMaxColors < 2 && + w * h >= tightConf[compressLevel].monoMinRectSize ) { + paletteMaxColors = 2; + } + + if (cl->format.bitsPerPixel == cl->screen->serverFormat.bitsPerPixel && + cl->format.redMax == cl->screen->serverFormat.redMax && + cl->format.greenMax == cl->screen->serverFormat.greenMax && + cl->format.blueMax == cl->screen->serverFormat.blueMax && + cl->format.bitsPerPixel >= 16) { + + /* This is so we can avoid translating the pixels when compressing + with JPEG, since it is unnecessary */ + switch (cl->format.bitsPerPixel) { + case 16: + FastFillPalette16(cl, (uint16_t *)fbptr, w, + cl->scaledScreen->paddedWidthInBytes / 2, h); + break; + default: + FastFillPalette32(cl, (uint32_t *)fbptr, w, + cl->scaledScreen->paddedWidthInBytes / 4, h); + } + + if(paletteNumColors != 0 || qualityLevel == -1) { + (*cl->translateFn)(cl->translateLookupTable, + &cl->screen->serverFormat, &cl->format, fbptr, + tightBeforeBuf, + cl->scaledScreen->paddedWidthInBytes, w, h); + } + } + else { + (*cl->translateFn)(cl->translateLookupTable, &cl->screen->serverFormat, + &cl->format, fbptr, tightBeforeBuf, + cl->scaledScreen->paddedWidthInBytes, w, h); + + switch (cl->format.bitsPerPixel) { + case 8: + FillPalette8(w * h); + break; + case 16: + FillPalette16(w * h); + break; + default: + FillPalette32(w * h); + } + } + + switch (paletteNumColors) { + case 0: + /* Truecolor image */ + if (qualityLevel != -1) { + success = SendJpegRect(cl, x, y, w, h, qualityLevel); + } else { + success = SendFullColorRect(cl, x, y, w, h); + } + break; + case 1: + /* Solid rectangle */ + success = SendSolidRect(cl); + break; + case 2: + /* Two-color rectangle */ + success = SendMonoRect(cl, x, y, w, h); + break; + default: + /* Up to 256 different colors */ + success = SendIndexedRect(cl, x, y, w, h); + } + return success; +} + +static rfbBool +SendTightHeader(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + rfbFramebufferUpdateRectHeader rect; + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.r.x = Swap16IfLE(x); + rect.r.y = Swap16IfLE(y); + rect.r.w = Swap16IfLE(w); + rect.r.h = Swap16IfLE(h); + rect.encoding = Swap32IfLE(cl->tightEncoding); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + rfbStatRecordEncodingSent(cl, cl->tightEncoding, + sz_rfbFramebufferUpdateRectHeader, + sz_rfbFramebufferUpdateRectHeader + + w * (cl->format.bitsPerPixel / 8) * h); + + return TRUE; +} + +/* + * Subencoding implementations. + */ + +static rfbBool +SendSolidRect(rfbClientPtr cl) +{ + int len; + + if (usePixelFormat24) { + Pack24(cl, tightBeforeBuf, &cl->format, 1); + len = 3; + } else + len = cl->format.bitsPerPixel / 8; + + if (cl->ublen + 1 + len > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + cl->updateBuf[cl->ublen++] = (char)(rfbTightFill << 4); + memcpy (&cl->updateBuf[cl->ublen], tightBeforeBuf, len); + cl->ublen += len; + + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, len + 1); + + return TRUE; +} + +static rfbBool +SendMonoRect(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + int streamId = 1; + int paletteLen, dataLen; + +#ifdef LIBVNCSERVER_HAVE_LIBPNG + if (CanSendPngRect(cl, w, h)) { + /* TODO: setup palette maybe */ + return SendPngRect(cl, x, y, w, h); + /* TODO: destroy palette maybe */ + } +#endif + + if ( cl->ublen + TIGHT_MIN_TO_COMPRESS + 6 + + 2 * cl->format.bitsPerPixel / 8 > UPDATE_BUF_SIZE ) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + /* Prepare tight encoding header. */ + dataLen = (w + 7) / 8; + dataLen *= h; + + if (tightConf[compressLevel].monoZlibLevel == 0 && + cl->tightEncoding != rfbEncodingTightPng) + cl->updateBuf[cl->ublen++] = + (char)((rfbTightNoZlib | rfbTightExplicitFilter) << 4); + else + cl->updateBuf[cl->ublen++] = (streamId | rfbTightExplicitFilter) << 4; + cl->updateBuf[cl->ublen++] = rfbTightFilterPalette; + cl->updateBuf[cl->ublen++] = 1; + + /* Prepare palette, convert image. */ + switch (cl->format.bitsPerPixel) { + + case 32: + EncodeMonoRect32((uint8_t *)tightBeforeBuf, w, h); + + ((uint32_t *)tightAfterBuf)[0] = monoBackground; + ((uint32_t *)tightAfterBuf)[1] = monoForeground; + if (usePixelFormat24) { + Pack24(cl, tightAfterBuf, &cl->format, 2); + paletteLen = 6; + } else + paletteLen = 8; + + memcpy(&cl->updateBuf[cl->ublen], tightAfterBuf, paletteLen); + cl->ublen += paletteLen; + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, 3 + paletteLen); + break; + + case 16: + EncodeMonoRect16((uint8_t *)tightBeforeBuf, w, h); + + ((uint16_t *)tightAfterBuf)[0] = (uint16_t)monoBackground; + ((uint16_t *)tightAfterBuf)[1] = (uint16_t)monoForeground; + + memcpy(&cl->updateBuf[cl->ublen], tightAfterBuf, 4); + cl->ublen += 4; + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, 7); + break; + + default: + EncodeMonoRect8((uint8_t *)tightBeforeBuf, w, h); + + cl->updateBuf[cl->ublen++] = (char)monoBackground; + cl->updateBuf[cl->ublen++] = (char)monoForeground; + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, 5); + } + + return CompressData(cl, streamId, dataLen, + tightConf[compressLevel].monoZlibLevel, + Z_DEFAULT_STRATEGY); +} + +static rfbBool +SendIndexedRect(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + int streamId = 2; + int i, entryLen; + +#ifdef LIBVNCSERVER_HAVE_LIBPNG + if (CanSendPngRect(cl, w, h)) { + return SendPngRect(cl, x, y, w, h); + } +#endif + + if ( cl->ublen + TIGHT_MIN_TO_COMPRESS + 6 + + paletteNumColors * cl->format.bitsPerPixel / 8 > + UPDATE_BUF_SIZE ) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + /* Prepare tight encoding header. */ + if (tightConf[compressLevel].idxZlibLevel == 0 && + cl->tightEncoding != rfbEncodingTightPng) + cl->updateBuf[cl->ublen++] = + (char)((rfbTightNoZlib | rfbTightExplicitFilter) << 4); + else + cl->updateBuf[cl->ublen++] = (streamId | rfbTightExplicitFilter) << 4; + cl->updateBuf[cl->ublen++] = rfbTightFilterPalette; + cl->updateBuf[cl->ublen++] = (char)(paletteNumColors - 1); + + /* Prepare palette, convert image. */ + switch (cl->format.bitsPerPixel) { + + case 32: + EncodeIndexedRect32((uint8_t *)tightBeforeBuf, w * h); + + for (i = 0; i < paletteNumColors; i++) { + ((uint32_t *)tightAfterBuf)[i] = + palette.entry[i].listNode->rgb; + } + if (usePixelFormat24) { + Pack24(cl, tightAfterBuf, &cl->format, paletteNumColors); + entryLen = 3; + } else + entryLen = 4; + + memcpy(&cl->updateBuf[cl->ublen], tightAfterBuf, + paletteNumColors * entryLen); + cl->ublen += paletteNumColors * entryLen; + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, + 3 + paletteNumColors * entryLen); + break; + + case 16: + EncodeIndexedRect16((uint8_t *)tightBeforeBuf, w * h); + + for (i = 0; i < paletteNumColors; i++) { + ((uint16_t *)tightAfterBuf)[i] = + (uint16_t)palette.entry[i].listNode->rgb; + } + + memcpy(&cl->updateBuf[cl->ublen], tightAfterBuf, paletteNumColors * 2); + cl->ublen += paletteNumColors * 2; + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, + 3 + paletteNumColors * 2); + break; + + default: + return FALSE; /* Should never happen. */ + } + + return CompressData(cl, streamId, w * h, + tightConf[compressLevel].idxZlibLevel, + Z_DEFAULT_STRATEGY); +} + +static rfbBool +SendFullColorRect(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + int streamId = 0; + int len; + +#ifdef LIBVNCSERVER_HAVE_LIBPNG + if (CanSendPngRect(cl, w, h)) { + return SendPngRect(cl, x, y, w, h); + } +#endif + + if (cl->ublen + TIGHT_MIN_TO_COMPRESS + 1 > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + if (tightConf[compressLevel].rawZlibLevel == 0 && + cl->tightEncoding != rfbEncodingTightPng) + cl->updateBuf[cl->ublen++] = (char)(rfbTightNoZlib << 4); + else + cl->updateBuf[cl->ublen++] = 0x00; /* stream id = 0, no flushing, no filter */ + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, 1); + + if (usePixelFormat24) { + Pack24(cl, tightBeforeBuf, &cl->format, w * h); + len = 3; + } else + len = cl->format.bitsPerPixel / 8; + + return CompressData(cl, streamId, w * h * len, + tightConf[compressLevel].rawZlibLevel, + Z_DEFAULT_STRATEGY); +} + +static rfbBool +CompressData(rfbClientPtr cl, + int streamId, + int dataLen, + int zlibLevel, + int zlibStrategy) +{ + z_streamp pz; + int err; + + if (dataLen < TIGHT_MIN_TO_COMPRESS) { + memcpy(&cl->updateBuf[cl->ublen], tightBeforeBuf, dataLen); + cl->ublen += dataLen; + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, dataLen); + return TRUE; + } + + if (zlibLevel == 0) + return SendCompressedData (cl, tightBeforeBuf, dataLen); + + pz = &cl->zsStruct[streamId]; + + /* Initialize compression stream if needed. */ + if (!cl->zsActive[streamId]) { + pz->zalloc = Z_NULL; + pz->zfree = Z_NULL; + pz->opaque = Z_NULL; + + err = deflateInit2 (pz, zlibLevel, Z_DEFLATED, MAX_WBITS, + MAX_MEM_LEVEL, zlibStrategy); + if (err != Z_OK) + return FALSE; + + cl->zsActive[streamId] = TRUE; + cl->zsLevel[streamId] = zlibLevel; + } + + /* Prepare buffer pointers. */ + pz->next_in = (Bytef *)tightBeforeBuf; + pz->avail_in = dataLen; + pz->next_out = (Bytef *)tightAfterBuf; + pz->avail_out = tightAfterBufSize; + + /* Change compression parameters if needed. */ + if (zlibLevel != cl->zsLevel[streamId]) { + if (deflateParams (pz, zlibLevel, zlibStrategy) != Z_OK) { + return FALSE; + } + cl->zsLevel[streamId] = zlibLevel; + } + + /* Actual compression. */ + if (deflate(pz, Z_SYNC_FLUSH) != Z_OK || + pz->avail_in != 0 || pz->avail_out == 0) { + return FALSE; + } + + return SendCompressedData(cl, tightAfterBuf, + tightAfterBufSize - pz->avail_out); +} + +static rfbBool SendCompressedData(rfbClientPtr cl, char *buf, + int compressedLen) +{ + int i, portionLen; + + cl->updateBuf[cl->ublen++] = compressedLen & 0x7F; + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, 1); + if (compressedLen > 0x7F) { + cl->updateBuf[cl->ublen-1] |= 0x80; + cl->updateBuf[cl->ublen++] = compressedLen >> 7 & 0x7F; + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, 1); + if (compressedLen > 0x3FFF) { + cl->updateBuf[cl->ublen-1] |= 0x80; + cl->updateBuf[cl->ublen++] = compressedLen >> 14 & 0xFF; + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, 1); + } + } + + portionLen = UPDATE_BUF_SIZE; + for (i = 0; i < compressedLen; i += portionLen) { + if (i + portionLen > compressedLen) { + portionLen = compressedLen - i; + } + if (cl->ublen + portionLen > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + memcpy(&cl->updateBuf[cl->ublen], &buf[i], portionLen); + cl->ublen += portionLen; + } + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, compressedLen); + + return TRUE; +} + + +/* + * Code to determine how many different colors used in rectangle. + */ + +static void +FillPalette8(int count) +{ + uint8_t *data = (uint8_t *)tightBeforeBuf; + uint8_t c0, c1; + int i, n0, n1; + + paletteNumColors = 0; + + c0 = data[0]; + for (i = 1; i < count && data[i] == c0; i++); + if (i == count) { + paletteNumColors = 1; + return; /* Solid rectangle */ + } + + if (paletteMaxColors < 2) + return; + + n0 = i; + c1 = data[i]; + n1 = 0; + for (i++; i < count; i++) { + if (data[i] == c0) { + n0++; + } else if (data[i] == c1) { + n1++; + } else + break; + } + if (i == count) { + if (n0 > n1) { + monoBackground = (uint32_t)c0; + monoForeground = (uint32_t)c1; + } else { + monoBackground = (uint32_t)c1; + monoForeground = (uint32_t)c0; + } + paletteNumColors = 2; /* Two colors */ + } +} + + +#define DEFINE_FILL_PALETTE_FUNCTION(bpp) \ + \ +static void \ +FillPalette##bpp(int count) { \ + uint##bpp##_t *data = (uint##bpp##_t *)tightBeforeBuf; \ + uint##bpp##_t c0, c1, ci; \ + int i, n0, n1, ni; \ + \ + c0 = data[0]; \ + for (i = 1; i < count && data[i] == c0; i++); \ + if (i >= count) { \ + paletteNumColors = 1; /* Solid rectangle */ \ + return; \ + } \ + \ + if (paletteMaxColors < 2) { \ + paletteNumColors = 0; /* Full-color encoding preferred */ \ + return; \ + } \ + \ + n0 = i; \ + c1 = data[i]; \ + n1 = 0; \ + for (i++; i < count; i++) { \ + ci = data[i]; \ + if (ci == c0) { \ + n0++; \ + } else if (ci == c1) { \ + n1++; \ + } else \ + break; \ + } \ + if (i >= count) { \ + if (n0 > n1) { \ + monoBackground = (uint32_t)c0; \ + monoForeground = (uint32_t)c1; \ + } else { \ + monoBackground = (uint32_t)c1; \ + monoForeground = (uint32_t)c0; \ + } \ + paletteNumColors = 2; /* Two colors */ \ + return; \ + } \ + \ + PaletteReset(); \ + PaletteInsert (c0, (uint32_t)n0, bpp); \ + PaletteInsert (c1, (uint32_t)n1, bpp); \ + \ + ni = 1; \ + for (i++; i < count; i++) { \ + if (data[i] == ci) { \ + ni++; \ + } else { \ + if (!PaletteInsert (ci, (uint32_t)ni, bpp)) \ + return; \ + ci = data[i]; \ + ni = 1; \ + } \ + } \ + PaletteInsert (ci, (uint32_t)ni, bpp); \ +} + +DEFINE_FILL_PALETTE_FUNCTION(16) +DEFINE_FILL_PALETTE_FUNCTION(32) + +#define DEFINE_FAST_FILL_PALETTE_FUNCTION(bpp) \ + \ +static void \ +FastFillPalette##bpp(rfbClientPtr cl, uint##bpp##_t *data, int w, \ + int pitch, int h) \ +{ \ + uint##bpp##_t c0, c1, ci, mask, c0t, c1t, cit; \ + int i, j, i2 = 0, j2, n0, n1, ni; \ + \ + if (cl->translateFn != rfbTranslateNone) { \ + mask = cl->screen->serverFormat.redMax \ + << cl->screen->serverFormat.redShift; \ + mask |= cl->screen->serverFormat.greenMax \ + << cl->screen->serverFormat.greenShift; \ + mask |= cl->screen->serverFormat.blueMax \ + << cl->screen->serverFormat.blueShift; \ + } else mask = ~0; \ + \ + c0 = data[0] & mask; \ + for (j = 0; j < h; j++) { \ + for (i = 0; i < w; i++) { \ + if ((data[j * pitch + i] & mask) != c0) \ + goto done; \ + } \ + } \ + done: \ + if (j >= h) { \ + paletteNumColors = 1; /* Solid rectangle */ \ + return; \ + } \ + if (paletteMaxColors < 2) { \ + paletteNumColors = 0; /* Full-color encoding preferred */ \ + return; \ + } \ + \ + n0 = j * w + i; \ + c1 = data[j * pitch + i] & mask; \ + n1 = 0; \ + i++; if (i >= w) {i = 0; j++;} \ + for (j2 = j; j2 < h; j2++) { \ + for (i2 = i; i2 < w; i2++) { \ + ci = data[j2 * pitch + i2] & mask; \ + if (ci == c0) { \ + n0++; \ + } else if (ci == c1) { \ + n1++; \ + } else \ + goto done2; \ + } \ + i = 0; \ + } \ + done2: \ + (*cl->translateFn)(cl->translateLookupTable, \ + &cl->screen->serverFormat, &cl->format, \ + (char *)&c0, (char *)&c0t, bpp/8, 1, 1); \ + (*cl->translateFn)(cl->translateLookupTable, \ + &cl->screen->serverFormat, &cl->format, \ + (char *)&c1, (char *)&c1t, bpp/8, 1, 1); \ + if (j2 >= h) { \ + if (n0 > n1) { \ + monoBackground = (uint32_t)c0t; \ + monoForeground = (uint32_t)c1t; \ + } else { \ + monoBackground = (uint32_t)c1t; \ + monoForeground = (uint32_t)c0t; \ + } \ + paletteNumColors = 2; /* Two colors */ \ + return; \ + } \ + \ + PaletteReset(); \ + PaletteInsert (c0t, (uint32_t)n0, bpp); \ + PaletteInsert (c1t, (uint32_t)n1, bpp); \ + \ + ni = 1; \ + i2++; if (i2 >= w) {i2 = 0; j2++;} \ + for (j = j2; j < h; j++) { \ + for (i = i2; i < w; i++) { \ + if ((data[j * pitch + i] & mask) == ci) { \ + ni++; \ + } else { \ + (*cl->translateFn)(cl->translateLookupTable, \ + &cl->screen->serverFormat, \ + &cl->format, (char *)&ci, \ + (char *)&cit, bpp/8, 1, 1); \ + if (!PaletteInsert (cit, (uint32_t)ni, bpp)) \ + return; \ + ci = data[j * pitch + i] & mask; \ + ni = 1; \ + } \ + } \ + i2 = 0; \ + } \ + \ + (*cl->translateFn)(cl->translateLookupTable, \ + &cl->screen->serverFormat, &cl->format, \ + (char *)&ci, (char *)&cit, bpp/8, 1, 1); \ + PaletteInsert (cit, (uint32_t)ni, bpp); \ +} + +DEFINE_FAST_FILL_PALETTE_FUNCTION(16) +DEFINE_FAST_FILL_PALETTE_FUNCTION(32) + + +/* + * Functions to operate with palette structures. + */ + +#define HASH_FUNC16(rgb) ((int)((((rgb) >> 8) + (rgb)) & 0xFF)) +#define HASH_FUNC32(rgb) ((int)((((rgb) >> 16) + ((rgb) >> 8)) & 0xFF)) + + +static void +PaletteReset(void) +{ + paletteNumColors = 0; + memset(palette.hash, 0, 256 * sizeof(COLOR_LIST *)); +} + + +static int +PaletteInsert(uint32_t rgb, + int numPixels, + int bpp) +{ + COLOR_LIST *pnode; + COLOR_LIST *prev_pnode = NULL; + int hash_key, idx, new_idx, count; + + hash_key = (bpp == 16) ? HASH_FUNC16(rgb) : HASH_FUNC32(rgb); + + pnode = palette.hash[hash_key]; + + while (pnode != NULL) { + if (pnode->rgb == rgb) { + /* Such palette entry already exists. */ + new_idx = idx = pnode->idx; + count = palette.entry[idx].numPixels + numPixels; + if (new_idx && palette.entry[new_idx-1].numPixels < count) { + do { + palette.entry[new_idx] = palette.entry[new_idx-1]; + palette.entry[new_idx].listNode->idx = new_idx; + new_idx--; + } + while (new_idx && palette.entry[new_idx-1].numPixels < count); + palette.entry[new_idx].listNode = pnode; + pnode->idx = new_idx; + } + palette.entry[new_idx].numPixels = count; + return paletteNumColors; + } + prev_pnode = pnode; + pnode = pnode->next; + } + + /* Check if palette is full. */ + if (paletteNumColors == 256 || paletteNumColors == paletteMaxColors) { + paletteNumColors = 0; + return 0; + } + + /* Move palette entries with lesser pixel counts. */ + for ( idx = paletteNumColors; + idx > 0 && palette.entry[idx-1].numPixels < numPixels; + idx-- ) { + palette.entry[idx] = palette.entry[idx-1]; + palette.entry[idx].listNode->idx = idx; + } + + /* Add new palette entry into the freed slot. */ + pnode = &palette.list[paletteNumColors]; + if (prev_pnode != NULL) { + prev_pnode->next = pnode; + } else { + palette.hash[hash_key] = pnode; + } + pnode->next = NULL; + pnode->idx = idx; + pnode->rgb = rgb; + palette.entry[idx].listNode = pnode; + palette.entry[idx].numPixels = numPixels; + + return (++paletteNumColors); +} + + +/* + * Converting 32-bit color samples into 24-bit colors. + * Should be called only when redMax, greenMax and blueMax are 255. + * Color components assumed to be byte-aligned. + */ + +static void Pack24(rfbClientPtr cl, + char *buf, + rfbPixelFormat *fmt, + int count) +{ + uint32_t *buf32; + uint32_t pix; + int r_shift, g_shift, b_shift; + + buf32 = (uint32_t *)buf; + + if (!cl->screen->serverFormat.bigEndian == !fmt->bigEndian) { + r_shift = fmt->redShift; + g_shift = fmt->greenShift; + b_shift = fmt->blueShift; + } else { + r_shift = 24 - fmt->redShift; + g_shift = 24 - fmt->greenShift; + b_shift = 24 - fmt->blueShift; + } + + while (count--) { + pix = *buf32++; + *buf++ = (char)(pix >> r_shift); + *buf++ = (char)(pix >> g_shift); + *buf++ = (char)(pix >> b_shift); + } +} + + +/* + * Converting truecolor samples into palette indices. + */ + +#define DEFINE_IDX_ENCODE_FUNCTION(bpp) \ + \ +static void \ +EncodeIndexedRect##bpp(uint8_t *buf, int count) { \ + COLOR_LIST *pnode; \ + uint##bpp##_t *src; \ + uint##bpp##_t rgb; \ + int rep = 0; \ + \ + src = (uint##bpp##_t *) buf; \ + \ + while (count--) { \ + rgb = *src++; \ + while (count && *src == rgb) { \ + rep++, src++, count--; \ + } \ + pnode = palette.hash[HASH_FUNC##bpp(rgb)]; \ + while (pnode != NULL) { \ + if ((uint##bpp##_t)pnode->rgb == rgb) { \ + *buf++ = (uint8_t)pnode->idx; \ + while (rep) { \ + *buf++ = (uint8_t)pnode->idx; \ + rep--; \ + } \ + break; \ + } \ + pnode = pnode->next; \ + } \ + } \ +} + +DEFINE_IDX_ENCODE_FUNCTION(16) +DEFINE_IDX_ENCODE_FUNCTION(32) + + +#define DEFINE_MONO_ENCODE_FUNCTION(bpp) \ + \ +static void \ +EncodeMonoRect##bpp(uint8_t *buf, int w, int h) { \ + uint##bpp##_t *ptr; \ + uint##bpp##_t bg; \ + unsigned int value, mask; \ + int aligned_width; \ + int x, y, bg_bits; \ + \ + ptr = (uint##bpp##_t *) buf; \ + bg = (uint##bpp##_t) monoBackground; \ + aligned_width = w - w % 8; \ + \ + for (y = 0; y < h; y++) { \ + for (x = 0; x < aligned_width; x += 8) { \ + for (bg_bits = 0; bg_bits < 8; bg_bits++) { \ + if (*ptr++ != bg) \ + break; \ + } \ + if (bg_bits == 8) { \ + *buf++ = 0; \ + continue; \ + } \ + mask = 0x80 >> bg_bits; \ + value = mask; \ + for (bg_bits++; bg_bits < 8; bg_bits++) { \ + mask >>= 1; \ + if (*ptr++ != bg) { \ + value |= mask; \ + } \ + } \ + *buf++ = (uint8_t)value; \ + } \ + \ + mask = 0x80; \ + value = 0; \ + if (x >= w) \ + continue; \ + \ + for (; x < w; x++) { \ + if (*ptr++ != bg) { \ + value |= mask; \ + } \ + mask >>= 1; \ + } \ + *buf++ = (uint8_t)value; \ + } \ +} + +DEFINE_MONO_ENCODE_FUNCTION(8) +DEFINE_MONO_ENCODE_FUNCTION(16) +DEFINE_MONO_ENCODE_FUNCTION(32) + + +/* + * JPEG compression stuff. + */ + +static rfbBool +SendJpegRect(rfbClientPtr cl, int x, int y, int w, int h, int quality) +{ + unsigned char *srcbuf; + int ps = cl->screen->serverFormat.bitsPerPixel / 8; + int subsamp = subsampLevel2tjsubsamp[subsampLevel]; + unsigned long size = 0; + int flags = 0, pitch; + unsigned char *tmpbuf = NULL; + + if (cl->screen->serverFormat.bitsPerPixel == 8) + return SendFullColorRect(cl, x, y, w, h); + + if (ps < 2) { + rfbLog("Error: JPEG requires 16-bit, 24-bit, or 32-bit pixel format.\n"); + return 0; + } + if (!j) { + if ((j = tjInitCompress()) == NULL) { + rfbLog("JPEG Error: %s\n", tjGetErrorStr()); + return 0; + } + } + + if (tightAfterBufSize < TJBUFSIZE(w, h)) { + if (tightAfterBuf == NULL) + tightAfterBuf = (char *)malloc(TJBUFSIZE(w, h)); + else + tightAfterBuf = (char *)realloc(tightAfterBuf, + TJBUFSIZE(w, h)); + if (!tightAfterBuf) { + rfbLog("Memory allocation failure!\n"); + return 0; + } + tightAfterBufSize = TJBUFSIZE(w, h); + } + + if (ps == 2) { + uint16_t *srcptr, pix; + unsigned char *dst; + int inRed, inGreen, inBlue, i, j; + + if((tmpbuf = (unsigned char *)malloc(w * h * 3)) == NULL) + rfbLog("Memory allocation failure!\n"); + srcptr = (uint16_t *)&cl->scaledScreen->frameBuffer + [y * cl->scaledScreen->paddedWidthInBytes + x * ps]; + dst = tmpbuf; + for(j = 0; j < h; j++) { + uint16_t *srcptr2 = srcptr; + unsigned char *dst2 = dst; + for (i = 0; i < w; i++) { + pix = *srcptr2++; + inRed = (int) (pix >> cl->screen->serverFormat.redShift + & cl->screen->serverFormat.redMax); + inGreen = (int) (pix >> cl->screen->serverFormat.greenShift + & cl->screen->serverFormat.greenMax); + inBlue = (int) (pix >> cl->screen->serverFormat.blueShift + & cl->screen->serverFormat.blueMax); + *dst2++ = (uint8_t)((inRed * 255 + + cl->screen->serverFormat.redMax / 2) + / cl->screen->serverFormat.redMax); + *dst2++ = (uint8_t)((inGreen * 255 + + cl->screen->serverFormat.greenMax / 2) + / cl->screen->serverFormat.greenMax); + *dst2++ = (uint8_t)((inBlue * 255 + + cl->screen->serverFormat.blueMax / 2) + / cl->screen->serverFormat.blueMax); + } + srcptr += cl->scaledScreen->paddedWidthInBytes / ps; + dst += w * 3; + } + srcbuf = tmpbuf; + pitch = w * 3; + ps = 3; + } else { + if (cl->screen->serverFormat.bigEndian && ps == 4) + flags |= TJ_ALPHAFIRST; + if (cl->screen->serverFormat.redShift == 16 + && cl->screen->serverFormat.blueShift == 0) + flags |= TJ_BGR; + if (cl->screen->serverFormat.bigEndian) + flags ^= TJ_BGR; + pitch = cl->scaledScreen->paddedWidthInBytes; + srcbuf = (unsigned char *)&cl->scaledScreen->frameBuffer + [y * pitch + x * ps]; + } + + if (tjCompress(j, srcbuf, w, pitch, h, ps, (unsigned char *)tightAfterBuf, + &size, subsamp, quality, flags) == -1) { + rfbLog("JPEG Error: %s\n", tjGetErrorStr()); + if (tmpbuf) { + free(tmpbuf); + tmpbuf = NULL; + } + return 0; + } + + if (tmpbuf) { + free(tmpbuf); + tmpbuf = NULL; + } + + if (cl->ublen + TIGHT_MIN_TO_COMPRESS + 1 > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + cl->updateBuf[cl->ublen++] = (char)(rfbTightJpeg << 4); + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, 1); + + return SendCompressedData(cl, tightAfterBuf, (int)size); +} + +static void +PrepareRowForImg(rfbClientPtr cl, + uint8_t *dst, + int x, + int y, + int count) +{ + if (cl->screen->serverFormat.bitsPerPixel == 32) { + if ( cl->screen->serverFormat.redMax == 0xFF && + cl->screen->serverFormat.greenMax == 0xFF && + cl->screen->serverFormat.blueMax == 0xFF ) { + PrepareRowForImg24(cl, dst, x, y, count); + } else { + PrepareRowForImg32(cl, dst, x, y, count); + } + } else { + /* 16 bpp assumed. */ + PrepareRowForImg16(cl, dst, x, y, count); + } +} + +static void +PrepareRowForImg24(rfbClientPtr cl, + uint8_t *dst, + int x, + int y, + int count) +{ + uint32_t *fbptr; + uint32_t pix; + + fbptr = (uint32_t *) + &cl->scaledScreen->frameBuffer[y * cl->scaledScreen->paddedWidthInBytes + x * 4]; + + while (count--) { + pix = *fbptr++; + *dst++ = (uint8_t)(pix >> cl->screen->serverFormat.redShift); + *dst++ = (uint8_t)(pix >> cl->screen->serverFormat.greenShift); + *dst++ = (uint8_t)(pix >> cl->screen->serverFormat.blueShift); + } +} + +#define DEFINE_JPEG_GET_ROW_FUNCTION(bpp) \ + \ +static void \ +PrepareRowForImg##bpp(rfbClientPtr cl, uint8_t *dst, int x, int y, int count) { \ + uint##bpp##_t *fbptr; \ + uint##bpp##_t pix; \ + int inRed, inGreen, inBlue; \ + \ + fbptr = (uint##bpp##_t *) \ + &cl->scaledScreen->frameBuffer[y * cl->scaledScreen->paddedWidthInBytes + \ + x * (bpp / 8)]; \ + \ + while (count--) { \ + pix = *fbptr++; \ + \ + inRed = (int) \ + (pix >> cl->screen->serverFormat.redShift & cl->screen->serverFormat.redMax); \ + inGreen = (int) \ + (pix >> cl->screen->serverFormat.greenShift & cl->screen->serverFormat.greenMax); \ + inBlue = (int) \ + (pix >> cl->screen->serverFormat.blueShift & cl->screen->serverFormat.blueMax); \ + \ + *dst++ = (uint8_t)((inRed * 255 + cl->screen->serverFormat.redMax / 2) / \ + cl->screen->serverFormat.redMax); \ + *dst++ = (uint8_t)((inGreen * 255 + cl->screen->serverFormat.greenMax / 2) / \ + cl->screen->serverFormat.greenMax); \ + *dst++ = (uint8_t)((inBlue * 255 + cl->screen->serverFormat.blueMax / 2) / \ + cl->screen->serverFormat.blueMax); \ + } \ +} + +DEFINE_JPEG_GET_ROW_FUNCTION(16) +DEFINE_JPEG_GET_ROW_FUNCTION(32) + +/* + * PNG compression stuff. + */ + +#ifdef LIBVNCSERVER_HAVE_LIBPNG + +static TLS int pngDstDataLen = 0; + +static rfbBool CanSendPngRect(rfbClientPtr cl, int w, int h) { + if (cl->tightEncoding != rfbEncodingTightPng) { + return FALSE; + } + + if ( cl->screen->serverFormat.bitsPerPixel == 8 || + cl->format.bitsPerPixel == 8) { + return FALSE; + } + + return TRUE; +} + +static void pngWriteData(png_structp png_ptr, png_bytep data, + png_size_t length) +{ +#if 0 + rfbClientPtr cl = png_get_io_ptr(png_ptr); + + buffer_reserve(&vs->tight.png, vs->tight.png.offset + length); + memcpy(vs->tight.png.buffer + vs->tight.png.offset, data, length); +#endif + memcpy(tightAfterBuf + pngDstDataLen, data, length); + + pngDstDataLen += length; +} + +static void pngFlushData(png_structp png_ptr) +{ +} + + +static void *pngMalloc(png_structp png_ptr, png_size_t size) +{ + return malloc(size); +} + +static void pngFree(png_structp png_ptr, png_voidp ptr) +{ + free(ptr); +} + +static rfbBool SendPngRect(rfbClientPtr cl, int x, int y, int w, int h) { + /* rfbLog(">> SendPngRect x:%d, y:%d, w:%d, h:%d\n", x, y, w, h); */ + + png_byte color_type; + png_structp png_ptr; + png_infop info_ptr; + png_colorp png_palette = NULL; + int level = tightPngConf[cl->tightCompressLevel].png_zlib_level; + int filters = tightPngConf[cl->tightCompressLevel].png_filters; + uint8_t *buf; + int dy; + + pngDstDataLen = 0; + + png_ptr = png_create_write_struct_2(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL, + NULL, pngMalloc, pngFree); + + if (png_ptr == NULL) + return FALSE; + + info_ptr = png_create_info_struct(png_ptr); + + if (info_ptr == NULL) { + png_destroy_write_struct(&png_ptr, NULL); + return FALSE; + } + + png_set_write_fn(png_ptr, (void *) cl, pngWriteData, pngFlushData); + png_set_compression_level(png_ptr, level); + png_set_filter(png_ptr, PNG_FILTER_TYPE_DEFAULT, filters); + +#if 0 + /* TODO: */ + if (palette) { + color_type = PNG_COLOR_TYPE_PALETTE; + } else { + color_type = PNG_COLOR_TYPE_RGB; + } +#else + color_type = PNG_COLOR_TYPE_RGB; +#endif + png_set_IHDR(png_ptr, info_ptr, w, h, + 8, color_type, PNG_INTERLACE_NONE, + PNG_COMPRESSION_TYPE_DEFAULT, PNG_FILTER_TYPE_DEFAULT); + +#if 0 + if (color_type == PNG_COLOR_TYPE_PALETTE) { + struct palette_cb_priv priv; + + png_palette = pngMalloc(png_ptr, sizeof(*png_palette) * + palette_size(palette)); + + priv.vs = vs; + priv.png_palette = png_palette; + palette_iter(palette, write_png_palette, &priv); + + png_set_PLTE(png_ptr, info_ptr, png_palette, palette_size(palette)); + + offset = vs->tight.tight.offset; + if (vs->clientds.pf.bytes_per_pixel == 4) { + tight_encode_indexed_rect32(vs->tight.tight.buffer, w * h, palette); + } else { + tight_encode_indexed_rect16(vs->tight.tight.buffer, w * h, palette); + } + } + + buffer_reserve(&vs->tight.png, 2048); +#endif + + png_write_info(png_ptr, info_ptr); + buf = malloc(w * 3); + for (dy = 0; dy < h; dy++) + { +#if 0 + if (color_type == PNG_COLOR_TYPE_PALETTE) { + memcpy(buf, vs->tight.tight.buffer + (dy * w), w); + } else { + PrepareRowForImg(cl, buf, x, y + dy, w); + } +#else + PrepareRowForImg(cl, buf, x, y + dy, w); +#endif + png_write_row(png_ptr, buf); + } + free(buf); + + png_write_end(png_ptr, NULL); + + if (color_type == PNG_COLOR_TYPE_PALETTE) { + pngFree(png_ptr, png_palette); + } + + png_destroy_write_struct(&png_ptr, &info_ptr); + + /* done v */ + + if (cl->ublen + TIGHT_MIN_TO_COMPRESS + 1 > UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + cl->updateBuf[cl->ublen++] = (char)(rfbTightPng << 4); + rfbStatRecordEncodingSentAdd(cl, cl->tightEncoding, 1); + + /* rfbLog("<< SendPngRect\n"); */ + return SendCompressedData(cl, tightAfterBuf, pngDstDataLen); +} +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filelistinfo.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filelistinfo.c new file mode 100644 index 0000000..c08e506 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filelistinfo.c @@ -0,0 +1,133 @@ +/* + * Copyright (c) 2005 Novell, Inc. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, + * you may find current contact information at www.novell.com + * + * Author : Rohit Kumar + * Email ID : rokumar@novell.com + * Date : 14th July 2005 + */ + + +#include +#include "rfb/rfb.h" +#include "filelistinfo.h" + + +/* This method is used for debugging purpose */ +void +DisplayFileList(FileListInfo fli) +{ + int i = 0; + if((fli.pEntries == NULL) || (fli.numEntries == 0)) return; + + rfbLog("DISPLAYING FILE NAMES IN THE LIST ...START\n\n"); + rfbLog("Numer of entries:: %d\n", fli.numEntries); + for(i = 0; i < fli.numEntries; i++) + rfbLog("file[%d]\t<%s>\n", i, fli.pEntries[i].name); + rfbLog("DISPLAYING FILE NAMES IN THE LIST ...END\n\n"); +} + +#ifndef __GNUC__ +#define __FUNCTION__ "unknown" +#endif + +int +AddFileListItemInfo(FileListInfoPtr fileListInfoPtr, char* name, + unsigned int size, unsigned int data) +{ + FileListItemInfoPtr fileListItemInfoPtr = (FileListItemInfoPtr) + calloc((fileListInfoPtr->numEntries + 1), + sizeof(FileListItemInfo)); + if(fileListItemInfoPtr == NULL) { + rfbLog("File [%s]: Method [%s]: fileListItemInfoPtr is NULL\n", + __FILE__, __FUNCTION__); + return FAILURE; + } + + if(fileListInfoPtr->numEntries != 0) { + memcpy(fileListItemInfoPtr, fileListInfoPtr->pEntries, + fileListInfoPtr->numEntries * sizeof(FileListItemInfo)); + } + + strcpy(fileListItemInfoPtr[fileListInfoPtr->numEntries].name, name); + fileListItemInfoPtr[fileListInfoPtr->numEntries].size = size; + fileListItemInfoPtr[fileListInfoPtr->numEntries].data = data; + + if(fileListInfoPtr->pEntries != NULL) { + free(fileListInfoPtr->pEntries); + fileListInfoPtr->pEntries = NULL; + } + + fileListInfoPtr->pEntries = fileListItemInfoPtr; + fileListItemInfoPtr = NULL; + fileListInfoPtr->numEntries++; + + return SUCCESS; +} + + +char* +GetFileNameAt(FileListInfo fileListInfo, int number) +{ + char* name = NULL; + if(number >= 0 && number < fileListInfo.numEntries) + name = fileListInfo.pEntries[number].name; + return name; +} + + +unsigned int +GetFileSizeAt(FileListInfo fileListInfo, int number) +{ + unsigned int size = 0; + if(number >= 0 && number < fileListInfo.numEntries) + size = fileListInfo.pEntries[number].size; + return size; +} + + +unsigned int +GetFileDataAt(FileListInfo fileListInfo, int number) +{ + unsigned int data = 0; + if(number >= 0 && number < fileListInfo.numEntries) + data = fileListInfo.pEntries[number].data; + return data; +} + + +unsigned int +GetSumOfFileNamesLength(FileListInfo fileListInfo) +{ + int i = 0, sumLen = 0; + for(i = 0; i < fileListInfo.numEntries; i++) + sumLen += strlen(fileListInfo.pEntries[i].name); + return sumLen; +} + + +void +FreeFileListInfo(FileListInfo fileListInfo) +{ + if(fileListInfo.pEntries != NULL) { + free(fileListInfo.pEntries); + fileListInfo.pEntries = NULL; + } + fileListInfo.numEntries = 0; +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filelistinfo.h b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filelistinfo.h new file mode 100644 index 0000000..a53964c --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filelistinfo.h @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2005 Novell, Inc. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, + * you may find current contact information at www.novell.com + * + * Author : Rohit Kumar + * Email ID : rokumar@novell.com + * Date : 14th July 2005 + */ + + +#ifndef FILE_LIST_INFO_H +#define FILE_LIST_INFO_H + +#include + +#if !defined(NAME_MAX) +#define NAME_MAX 255 +#endif + + +#define SUCCESS 1 +#define FAILURE 0 + +typedef struct _FileListItemInfo { + char name[NAME_MAX]; + unsigned int size; + unsigned int data; +} FileListItemInfo, *FileListItemInfoPtr; + +typedef struct _FileListItemSize { + unsigned int size; + unsigned int data; +} FileListItemSize, *FileListItemSizePtr; + +typedef struct _FileListInfo { + FileListItemInfoPtr pEntries; + int numEntries; +} FileListInfo, *FileListInfoPtr; + +int AddFileListItemInfo(FileListInfoPtr fileListInfoPtr, char* name, unsigned int size, unsigned int data); +char* GetFileNameAt(FileListInfo fileListInfo, int number); +unsigned int GetFileSizeAt(FileListInfo fileListInfo, int number); +unsigned int GetFileDataAt(FileListInfo fileListInfo, int number); +unsigned int GetSumOfFileNamesLength(FileListInfo fileListInfo); +void FreeFileListInfo(FileListInfo fileListInfo); + +void DisplayFileList(FileListInfo fli); + +#endif + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filetransfermsg.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filetransfermsg.c new file mode 100644 index 0000000..a0d7a5e --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filetransfermsg.c @@ -0,0 +1,636 @@ +/* + * Copyright (c) 2005 Novell, Inc. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, + * you may find current contact information at www.novell.com + * + * Author : Rohit Kumar + * Email ID : rokumar@novell.com + * Date : 14th July 2005 + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "rfbtightproto.h" +#include "filelistinfo.h" +#include "filetransfermsg.h" +#include "handlefiletransferrequest.h" + +#define SZ_RFBBLOCKSIZE 8192 + + +void +FreeFileTransferMsg(FileTransferMsg ftm) +{ + + if(ftm.data != NULL) { + free(ftm.data); + ftm.data = NULL; + } + + ftm.length = 0; + +} + + +/****************************************************************************** + * Methods to handle file list request. + ******************************************************************************/ + +int CreateFileListInfo(FileListInfoPtr pFileListInfo, char* path, int flag); +FileTransferMsg CreateFileListErrMsg(char flags); +FileTransferMsg CreateFileListMsg(FileListInfo fileListInfo, char flags); + + +/* + * This is the method called by HandleFileListRequest to get the file list + */ + +FileTransferMsg +GetFileListResponseMsg(char* path, char flags) +{ + FileTransferMsg fileListMsg; + FileListInfo fileListInfo; + int status = -1; + + memset(&fileListMsg, 0, sizeof(FileTransferMsg)); + memset(&fileListInfo, 0, sizeof(FileListInfo)); + + + /* fileListInfo can have null data if the folder is Empty + or if some error condition has occured. + The return value is 'failure' only if some error condition has occured. + */ + status = CreateFileListInfo(&fileListInfo, path, !(flags & 0x10)); + + if(status == FAILURE) { + fileListMsg = CreateFileListErrMsg(flags); + } + else { + /* DisplayFileList(fileListInfo); For Debugging */ + + fileListMsg = CreateFileListMsg(fileListInfo, flags); + FreeFileListInfo(fileListInfo); + } + + return fileListMsg; +} + +#ifndef __GNUC__ +#define __FUNCTION__ "unknown" +#endif + +int +CreateFileListInfo(FileListInfoPtr pFileListInfo, char* path, int flag) +{ + DIR* pDir = NULL; + struct dirent* pDirent = NULL; + + if((path == NULL) || (strlen(path) == 0)) { + /* In this case we will send the list of entries in ftp root*/ + sprintf(path, "%s%s", GetFtpRoot(), "/"); + } + + if((pDir = opendir(path)) == NULL) { + rfbLog("File [%s]: Method [%s]: not able to open the dir\n", + __FILE__, __FUNCTION__); + return FAILURE; + } + + while((pDirent = readdir(pDir))) { + if(strcmp(pDirent->d_name, ".") && strcmp(pDirent->d_name, "..")) { + struct stat stat_buf; + /* + int fpLen = sizeof(char)*(strlen(pDirent->d_name)+strlen(path)+2); + */ + char fullpath[PATH_MAX]; + + memset(fullpath, 0, PATH_MAX); + + strcpy(fullpath, path); + if(path[strlen(path)-1] != '/') + strcat(fullpath, "/"); + strcat(fullpath, pDirent->d_name); + + if(stat(fullpath, &stat_buf) < 0) { + rfbLog("File [%s]: Method [%s]: Reading stat for file %s failed\n", + __FILE__, __FUNCTION__, fullpath); + continue; + } + + if(S_ISDIR(stat_buf.st_mode)) { + if(AddFileListItemInfo(pFileListInfo, pDirent->d_name, -1, 0) == 0) { + rfbLog("File [%s]: Method [%s]: Add directory %s in the" + " list failed\n", __FILE__, __FUNCTION__, fullpath); + continue; + } + } + else { + if(flag) { + if(AddFileListItemInfo(pFileListInfo, pDirent->d_name, + stat_buf.st_size, + stat_buf.st_mtime) == 0) { + rfbLog("File [%s]: Method [%s]: Add file %s in the " + "list failed\n", __FILE__, __FUNCTION__, fullpath); + continue; + } + } + } + } + } + if(closedir(pDir) < 0) { + rfbLog("File [%s]: Method [%s]: ERROR Couldn't close dir\n", + __FILE__, __FUNCTION__); + } + + return SUCCESS; +} + + +FileTransferMsg +CreateFileListErrMsg(char flags) +{ + FileTransferMsg fileListMsg; + rfbFileListDataMsg* pFLD = NULL; + char* data = NULL; + unsigned int length = 0; + + memset(&fileListMsg, 0, sizeof(FileTransferMsg)); + + data = (char*) calloc(sizeof(rfbFileListDataMsg), sizeof(char)); + if(data == NULL) { + return fileListMsg; + } + length = sizeof(rfbFileListDataMsg) * sizeof(char); + pFLD = (rfbFileListDataMsg*) data; + + pFLD->type = rfbFileListData; + pFLD->numFiles = Swap16IfLE(0); + pFLD->dataSize = Swap16IfLE(0); + pFLD->compressedSize = Swap16IfLE(0); + pFLD->flags = flags | 0x80; + + fileListMsg.data = data; + fileListMsg.length = length; + + return fileListMsg; +} + + +FileTransferMsg +CreateFileListMsg(FileListInfo fileListInfo, char flags) +{ + FileTransferMsg fileListMsg; + rfbFileListDataMsg* pFLD = NULL; + char *data = NULL, *pFileNames = NULL; + unsigned int length = 0, dsSize = 0, i = 0; + FileListItemSizePtr pFileListItemSize = NULL; + + memset(&fileListMsg, 0, sizeof(FileTransferMsg)); + dsSize = fileListInfo.numEntries * 8; + length = sz_rfbFileListDataMsg + dsSize + + GetSumOfFileNamesLength(fileListInfo) + + fileListInfo.numEntries; + + data = (char*) calloc(length, sizeof(char)); + if(data == NULL) { + return fileListMsg; + } + pFLD = (rfbFileListDataMsg*) data; + pFileListItemSize = (FileListItemSizePtr) &data[sz_rfbFileListDataMsg]; + pFileNames = &data[sz_rfbFileListDataMsg + dsSize]; + + pFLD->type = rfbFileListData; + pFLD->flags = flags & 0xF0; + pFLD->numFiles = Swap16IfLE(fileListInfo.numEntries); + pFLD->dataSize = Swap16IfLE(GetSumOfFileNamesLength(fileListInfo) + + fileListInfo.numEntries); + pFLD->compressedSize = pFLD->dataSize; + + for(i =0; i rcft.rcfd.fName; + + memset(pBuf, 0, SZ_RFBBLOCKSIZE); + + if((rtcp->rcft.rcfd.downloadInProgress == FALSE) && (rtcp->rcft.rcfd.downloadFD == -1)) { + if((rtcp->rcft.rcfd.downloadFD = open(path, O_RDONLY)) == -1) { + rfbLog("File [%s]: Method [%s]: Error: Couldn't open file\n", + __FILE__, __FUNCTION__); + return GetFileDownloadReadDataErrMsg(); + } + rtcp->rcft.rcfd.downloadInProgress = TRUE; + } + if((rtcp->rcft.rcfd.downloadInProgress == TRUE) && (rtcp->rcft.rcfd.downloadFD != -1)) { + if( (numOfBytesRead = read(rtcp->rcft.rcfd.downloadFD, pBuf, SZ_RFBBLOCKSIZE)) <= 0) { + close(rtcp->rcft.rcfd.downloadFD); + rtcp->rcft.rcfd.downloadFD = -1; + rtcp->rcft.rcfd.downloadInProgress = FALSE; + if(numOfBytesRead == 0) { + return CreateFileDownloadZeroSizeDataMsg(rtcp->rcft.rcfd.mTime); + } + return GetFileDownloadReadDataErrMsg(); + } + return CreateFileDownloadBlockSizeDataMsg(numOfBytesRead, pBuf); + } + return GetFileDownLoadErrMsg(); +} + + +FileTransferMsg +ChkFileDownloadErr(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + FileTransferMsg fileDownloadMsg; + struct stat stat_buf; + int sz_rfbFileSize = 0; + char* path = rtcp->rcft.rcfd.fName; + + memset(&fileDownloadMsg, 0, sizeof(FileTransferMsg)); + + if( (path == NULL) || (strlen(path) == 0) || + (stat(path, &stat_buf) < 0) || (!(S_ISREG(stat_buf.st_mode))) ) { + + char reason[] = "Cannot open file, perhaps it is absent or is not a regular file"; + int reasonLen = strlen(reason); + + rfbLog("File [%s]: Method [%s]: Reading stat for path %s failed\n", + __FILE__, __FUNCTION__, path); + + fileDownloadMsg = CreateFileDownloadErrMsg(reason, reasonLen); + } + else { + rtcp->rcft.rcfd.mTime = stat_buf.st_mtime; + sz_rfbFileSize = stat_buf.st_size; + if(sz_rfbFileSize <= 0) { + fileDownloadMsg = CreateFileDownloadZeroSizeDataMsg(stat_buf.st_mtime); + } + + } + return fileDownloadMsg; +} + + +FileTransferMsg +CreateFileDownloadErrMsg(char* reason, unsigned int reasonLen) +{ + FileTransferMsg fileDownloadErrMsg; + int length = sz_rfbFileDownloadFailedMsg + reasonLen + 1; + rfbFileDownloadFailedMsg *pFDF = NULL; + char *pFollow = NULL; + + char *pData = (char*) calloc(length, sizeof(char)); + memset(&fileDownloadErrMsg, 0, sizeof(FileTransferMsg)); + if(pData == NULL) { + rfbLog("File [%s]: Method [%s]: pData is NULL\n", + __FILE__, __FUNCTION__); + return fileDownloadErrMsg; + } + + pFDF = (rfbFileDownloadFailedMsg *) pData; + pFollow = &pData[sz_rfbFileDownloadFailedMsg]; + + pFDF->type = rfbFileDownloadFailed; + pFDF->reasonLen = Swap16IfLE(reasonLen); + memcpy(pFollow, reason, reasonLen); + + fileDownloadErrMsg.data = pData; + fileDownloadErrMsg.length = length; + + return fileDownloadErrMsg; +} + + +FileTransferMsg +CreateFileDownloadZeroSizeDataMsg(unsigned long mTime) +{ + FileTransferMsg fileDownloadZeroSizeDataMsg; + int length = sz_rfbFileDownloadDataMsg + sizeof(unsigned long); + rfbFileDownloadDataMsg *pFDD = NULL; + char *pFollow = NULL; + + char *pData = (char*) calloc(length, sizeof(char)); + memset(&fileDownloadZeroSizeDataMsg, 0, sizeof(FileTransferMsg)); + if(pData == NULL) { + rfbLog("File [%s]: Method [%s]: pData is NULL\n", + __FILE__, __FUNCTION__); + return fileDownloadZeroSizeDataMsg; + } + + pFDD = (rfbFileDownloadDataMsg *) pData; + pFollow = &pData[sz_rfbFileDownloadDataMsg]; + + pFDD->type = rfbFileDownloadData; + pFDD->compressLevel = 0; + pFDD->compressedSize = Swap16IfLE(0); + pFDD->realSize = Swap16IfLE(0); + + memcpy(pFollow, &mTime, sizeof(unsigned long)); + + fileDownloadZeroSizeDataMsg.data = pData; + fileDownloadZeroSizeDataMsg.length = length; + + return fileDownloadZeroSizeDataMsg; + +} + + +FileTransferMsg +CreateFileDownloadBlockSizeDataMsg(unsigned short sizeFile, char *pFile) +{ + FileTransferMsg fileDownloadBlockSizeDataMsg; + int length = sz_rfbFileDownloadDataMsg + sizeFile; + rfbFileDownloadDataMsg *pFDD = NULL; + char *pFollow = NULL; + + char *pData = (char*) calloc(length, sizeof(char)); + memset(&fileDownloadBlockSizeDataMsg, 0, sizeof(FileTransferMsg)); + if(NULL == pData) { + rfbLog("File [%s]: Method [%s]: pData is NULL\n", + __FILE__, __FUNCTION__); + return fileDownloadBlockSizeDataMsg; + } + + pFDD = (rfbFileDownloadDataMsg *) pData; + pFollow = &pData[sz_rfbFileDownloadDataMsg]; + + pFDD->type = rfbFileDownloadData; + pFDD->compressLevel = 0; + pFDD->compressedSize = Swap16IfLE(sizeFile); + pFDD->realSize = Swap16IfLE(sizeFile); + + memcpy(pFollow, pFile, sizeFile); + + fileDownloadBlockSizeDataMsg.data = pData; + fileDownloadBlockSizeDataMsg.length = length; + + return fileDownloadBlockSizeDataMsg; + +} + + +/****************************************************************************** + * Methods to handle file upload request + ******************************************************************************/ + +FileTransferMsg CreateFileUploadErrMsg(char* reason, unsigned int reasonLen); + +FileTransferMsg +GetFileUploadLengthErrResponseMsg() +{ + char reason [] = "Path length exceeds PATH_MAX (4096) bytes"; + int reasonLen = strlen(reason); + + return CreateFileUploadErrMsg(reason, reasonLen); +} + + +FileTransferMsg +ChkFileUploadErr(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + FileTransferMsg fileUploadErrMsg; + + memset(&fileUploadErrMsg, 0, sizeof(FileTransferMsg)); + if( (rtcp->rcft.rcfu.fName == NULL) || + (strlen(rtcp->rcft.rcfu.fName) == 0) || + ((rtcp->rcft.rcfu.uploadFD = creat(rtcp->rcft.rcfu.fName, + S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH)) == -1)) { + + char reason[] = "Could not create file"; + int reasonLen = strlen(reason); + fileUploadErrMsg = CreateFileUploadErrMsg(reason, reasonLen); + } + else + rtcp->rcft.rcfu.uploadInProgress = TRUE; + + return fileUploadErrMsg; +} + + +FileTransferMsg +GetFileUploadCompressedLevelErrMsg() +{ + char reason[] = "Server does not support data compression on upload"; + int reasonLen = strlen(reason); + + return CreateFileUploadErrMsg(reason, reasonLen); +} + + +FileTransferMsg +ChkFileUploadWriteErr(rfbClientPtr cl, rfbTightClientPtr rtcp, char* pBuf) +{ + FileTransferMsg ftm; + unsigned long numOfBytesWritten = 0; + + memset(&ftm, 0, sizeof(FileTransferMsg)); + + numOfBytesWritten = write(rtcp->rcft.rcfu.uploadFD, pBuf, rtcp->rcft.rcfu.fSize); + + if(numOfBytesWritten != rtcp->rcft.rcfu.fSize) { + char reason[] = "Error writing file data"; + int reasonLen = strlen(reason); + ftm = CreateFileUploadErrMsg(reason, reasonLen); + CloseUndoneFileTransfer(cl, rtcp); + } + return ftm; +} + + +void +FileUpdateComplete(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + /* Here we are settimg the modification and access time of the file */ + /* Windows code stes mod/access/creation time of the file */ + struct utimbuf utb; + + utb.actime = utb.modtime = rtcp->rcft.rcfu.mTime; + if(utime(rtcp->rcft.rcfu.fName, &utb) == -1) { + rfbLog("File [%s]: Method [%s]: Setting the modification/access" + " time for the file <%s> failed\n", __FILE__, + __FUNCTION__, rtcp->rcft.rcfu.fName); + } + + if(rtcp->rcft.rcfu.uploadFD != -1) { + close(rtcp->rcft.rcfu.uploadFD); + rtcp->rcft.rcfu.uploadFD = -1; + rtcp->rcft.rcfu.uploadInProgress = FALSE; + } +} + + +FileTransferMsg +CreateFileUploadErrMsg(char* reason, unsigned int reasonLen) +{ + FileTransferMsg fileUploadErrMsg; + int length = sz_rfbFileUploadCancelMsg + reasonLen; + rfbFileUploadCancelMsg *pFDF = NULL; + char *pFollow = NULL; + + char *pData = (char*) calloc(length, sizeof(char)); + memset(&fileUploadErrMsg, 0, sizeof(FileTransferMsg)); + if(pData == NULL) { + rfbLog("File [%s]: Method [%s]: pData is NULL\n", + __FILE__, __FUNCTION__); + return fileUploadErrMsg; + } + + pFDF = (rfbFileUploadCancelMsg *) pData; + pFollow = &pData[sz_rfbFileUploadCancelMsg]; + + pFDF->type = rfbFileUploadCancel; + pFDF->reasonLen = Swap16IfLE(reasonLen); + memcpy(pFollow, reason, reasonLen); + + fileUploadErrMsg.data = pData; + fileUploadErrMsg.length = length; + + return fileUploadErrMsg; +} + + +/****************************************************************************** + * Method to cancel File Transfer operation. + ******************************************************************************/ + +void +CloseUndoneFileTransfer(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + /* TODO :: File Upload case is not handled currently */ + /* TODO :: In case of concurrency we need to use Critical Section */ + + if(cl == NULL) + return; + + + if(rtcp->rcft.rcfu.uploadInProgress == TRUE) { + rtcp->rcft.rcfu.uploadInProgress = FALSE; + + if(rtcp->rcft.rcfu.uploadFD != -1) { + close(rtcp->rcft.rcfu.uploadFD); + rtcp->rcft.rcfu.uploadFD = -1; + } + + if(unlink(rtcp->rcft.rcfu.fName) == -1) { + rfbLog("File [%s]: Method [%s]: Delete operation on file <%s> failed\n", + __FILE__, __FUNCTION__, rtcp->rcft.rcfu.fName); + } + + memset(rtcp->rcft.rcfu.fName, 0 , PATH_MAX); + } + + if(rtcp->rcft.rcfd.downloadInProgress == TRUE) { + rtcp->rcft.rcfd.downloadInProgress = FALSE; + + if(rtcp->rcft.rcfd.downloadFD != -1) { + close(rtcp->rcft.rcfd.downloadFD); + rtcp->rcft.rcfd.downloadFD = -1; + } + memset(rtcp->rcft.rcfd.fName, 0 , PATH_MAX); + } +} + + +/****************************************************************************** + * Method to handle create directory request. + ******************************************************************************/ + +void +CreateDirectory(char* dirName) +{ + if(dirName == NULL) return; + + if(mkdir(dirName, 0700) == -1) { + rfbLog("File [%s]: Method [%s]: Create operation for directory <%s> failed\n", + __FILE__, __FUNCTION__, dirName); + } +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filetransfermsg.h b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filetransfermsg.h new file mode 100644 index 0000000..30e58df --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/filetransfermsg.h @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2005 Novell, Inc. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, + * you may find current contact information at www.novell.com + * + * Author : Rohit Kumar + * Email ID : rokumar@novell.com + * Date : 14th July 2005 + */ + + +#ifndef FILE_TRANSFER_MSG_H +#define FILE_TRANSFER_MSG_H + +typedef struct _FileTransferMsg { + char* data; + unsigned int length; +} FileTransferMsg; + +FileTransferMsg GetFileListResponseMsg(char* path, char flag); + +FileTransferMsg GetFileDownloadResponseMsg(char* path); +FileTransferMsg GetFileDownloadLengthErrResponseMsg(); +FileTransferMsg GetFileDownLoadErrMsg(); +FileTransferMsg GetFileDownloadResponseMsgInBlocks(rfbClientPtr cl, rfbTightClientPtr data); +FileTransferMsg ChkFileDownloadErr(rfbClientPtr cl, rfbTightClientPtr data); + +FileTransferMsg GetFileUploadLengthErrResponseMsg(); +FileTransferMsg GetFileUploadCompressedLevelErrMsg(); +FileTransferMsg ChkFileUploadErr(rfbClientPtr cl, rfbTightClientPtr data); +FileTransferMsg ChkFileUploadWriteErr(rfbClientPtr cl, rfbTightClientPtr data, char* pBuf); + +void CreateDirectory(char* dirName); +void FileUpdateComplete(rfbClientPtr cl, rfbTightClientPtr data); +void CloseUndoneFileTransfer(rfbClientPtr cl, rfbTightClientPtr data); + +void FreeFileTransferMsg(FileTransferMsg ftm); + +#endif + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/handlefiletransferrequest.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/handlefiletransferrequest.c new file mode 100644 index 0000000..2bd5ba1 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/handlefiletransferrequest.c @@ -0,0 +1,993 @@ +/* + * Copyright (c) 2005 Novell, Inc. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, + * you may find current contact information at www.novell.com + * + * Author : Rohit Kumar + * Email ID : rokumar@novell.com + * Date : 14th July 2005 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "rfbtightproto.h" +#include "filetransfermsg.h" +#include "handlefiletransferrequest.h" + + +pthread_mutex_t fileDownloadMutex = PTHREAD_MUTEX_INITIALIZER; + +rfbBool fileTransferEnabled = TRUE; +rfbBool fileTransferInitted = FALSE; +char ftproot[PATH_MAX]; + + +/****************************************************************************** + * File Transfer Init methods. These methods are called for initializating + * File Transfer and setting ftproot. + ******************************************************************************/ + +void InitFileTransfer(); +int SetFtpRoot(char* path); +char* GetHomeDir(uid_t uid); +void FreeHomeDir(char *homedir); + +/* + * InitFileTransfer method is called before parsing the command-line options + * for Xvnc. This sets the ftproot to the Home dir of the user running the Xvnc + * server. In case of error ftproot is set to '\0' char. + */ + +void +InitFileTransfer() +{ + char* userHome = NULL; + uid_t uid = geteuid(); + + if(fileTransferInitted) + return; + + rfbLog("tightvnc-filetransfer/InitFileTransfer\n"); + + memset(ftproot, 0, sizeof(ftproot)); + + userHome = GetHomeDir(uid); + + if((userHome != NULL) && (strlen(userHome) != 0)) { + SetFtpRoot(userHome); + FreeHomeDir(userHome); + } + + fileTransferEnabled = TRUE; + fileTransferInitted = TRUE; +} + +#ifndef __GNUC__ +#define __FUNCTION__ "unknown" +#endif + +/* + * This method is called from InitFileTransfer method and + * if the command line option for ftproot is provided. + */ +int +SetFtpRoot(char* path) +{ + struct stat stat_buf; + DIR* dir = NULL; + + rfbLog("tightvnc-filetransfer/SetFtpRoot\n"); + + if((path == NULL) || (strlen(path) == 0) || (strlen(path) > (PATH_MAX - 1))) { + rfbLog("File [%s]: Method [%s]: parameter passed is improper, ftproot" + " not changed\n", __FILE__, __FUNCTION__); + return FALSE; + } + + if(stat(path, &stat_buf) < 0) { + rfbLog("File [%s]: Method [%s]: Reading stat for file %s failed\n", + __FILE__, __FUNCTION__, path); + return FALSE; + } + + if(S_ISDIR(stat_buf.st_mode) == 0) { + rfbLog("File [%s]: Method [%s]: path specified is not a directory\n", + __FILE__, __FUNCTION__); + return FALSE; + } + + if((dir = opendir(path)) == NULL) { + rfbLog("File [%s]: Method [%s]: Not able to open the directory\n", + __FILE__, __FUNCTION__); + return FALSE; + } + else { + closedir(dir); + dir = NULL; + } + + + memset(ftproot, 0, PATH_MAX); + if(path[strlen(path)-1] == '/') { + memcpy(ftproot, path, strlen(path)-1); + } + else + memcpy(ftproot, path, strlen(path)); + + + return TRUE; +} + + +/* + * Get the home directory for the user name + * param: username - name of the user for whom the home directory is required. + * returns: returns the home directory for the user, or null in case the entry + * is not found or any error. The returned string must be freed by calling the + * freehomedir function. +*/ +char* +GetHomeDir(uid_t uid) +{ + struct passwd *pwEnt = NULL; + char *homedir = NULL; + + pwEnt = getpwuid (uid); + if (pwEnt == NULL) + return NULL; + + if(pwEnt->pw_dir != NULL) { + homedir = strdup (pwEnt->pw_dir); + } + + return homedir; +} + + +/* + * Free the home directory allocated by a previous call to retrieve the home + * directory. param: homedir - the string returned by a previous call to + * retrieve home directory for a user. + */ +void +FreeHomeDir(char *homedir) +{ + free (homedir); +} + + +/****************************************************************************** + * General methods. + ******************************************************************************/ + +/* + * When the console sends the File Transfer Request, it sends the file path with + * ftproot as "/". So on Agent, to get the absolute file path we need to prepend + * the ftproot to it. + */ +char* +ConvertPath(char* path) +{ + char p[PATH_MAX]; + memset(p, 0, PATH_MAX); + + if( (path == NULL) || + (strlen(path) == 0) || + (strlen(path)+strlen(ftproot) > PATH_MAX - 1) ) { + + rfbLog("File [%s]: Method [%s]: cannot create path for file transfer\n", + __FILE__, __FUNCTION__); + return NULL; + } + + memcpy(p, path, strlen(path)); + memset(path, 0, PATH_MAX); + sprintf(path, "%s%s", ftproot, p); + + return path; +} + + +void +EnableFileTransfer(rfbBool enable) +{ + fileTransferEnabled = enable; +} + + +rfbBool +IsFileTransferEnabled() +{ + return fileTransferEnabled; +} + + +char* +GetFtpRoot() +{ + return ftproot; +} + + +/****************************************************************************** + * Methods to Handle File List Request. + ******************************************************************************/ + +/* + * HandleFileListRequest method is called when the server receives + * FileListRequest. In case of success a file list is sent to the client. + * For File List Request there is no failure reason sent.So here in case of any + * "unexpected" error no information will be sent. As these conditions should + * never come. Lets hope it never arrives :) + * In case of dir open failure an empty list will be sent, just the header of + * the message filled up. So on console you will get an Empty listing. + */ +void +HandleFileListRequest(rfbClientPtr cl, rfbTightClientRec* data) +{ + rfbClientToServerTightMsg msg; + int n = 0; + char path[PATH_MAX]; /* PATH_MAX has the value 4096 and is defined in limits.h */ + FileTransferMsg fileListMsg; + + memset(&msg, 0, sizeof(rfbClientToServerTightMsg)); + memset(path, 0, PATH_MAX); + memset(&fileListMsg, 0, sizeof(FileTransferMsg)); + + if(cl == NULL) { + rfbLog("File [%s]: Method [%s]: Unexpected error: rfbClientPtr is null\n", + __FILE__, __FUNCTION__); + return; + } + + if((n = rfbReadExact(cl, ((char *)&msg)+1, sz_rfbFileListRequestMsg-1)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Socket error while reading dir name" + " length\n", __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + + msg.flr.dirNameSize = Swap16IfLE(msg.flr.dirNameSize); + if ((msg.flr.dirNameSize == 0) || + (msg.flr.dirNameSize > (PATH_MAX - 1))) { + + rfbLog("File [%s]: Method [%s]: Unexpected error:: path length is " + "greater that PATH_MAX\n", __FILE__, __FUNCTION__); + + return; + } + + if((n = rfbReadExact(cl, path, msg.flr.dirNameSize)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Socket error while reading dir name\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + + if(ConvertPath(path) == NULL) { + + /* The execution should never reach here */ + rfbLog("File [%s]: Method [%s]: Unexpected error: path is NULL", + __FILE__, __FUNCTION__); + return; + } + + fileListMsg = GetFileListResponseMsg(path, (char) (msg.flr.flags)); + + if((fileListMsg.data == NULL) || (fileListMsg.length == 0)) { + + rfbLog("File [%s]: Method [%s]: Unexpected error:: Data to be sent is " + "of Zero length\n", __FILE__, __FUNCTION__); + return; + } + + rfbWriteExact(cl, fileListMsg.data, fileListMsg.length); + + FreeFileTransferMsg(fileListMsg); +} + + +/****************************************************************************** + * Methods to Handle File Download Request. + ******************************************************************************/ + +void HandleFileDownloadLengthError(rfbClientPtr cl, short fNameSize); +void SendFileDownloadLengthErrMsg(rfbClientPtr cl); +void HandleFileDownload(rfbClientPtr cl, rfbTightClientPtr data); +#ifdef TODO +void HandleFileDownloadRequest(rfbClientPtr cl); +void SendFileDownloadErrMsg(rfbClientPtr cl); +void* RunFileDownloadThread(void* client); +#endif + +/* + * HandleFileDownloadRequest method is called when the server receives + * rfbFileDownload request message. + */ +void +HandleFileDownloadRequest(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + int n = 0; + char path[PATH_MAX]; /* PATH_MAX has the value 4096 and is defined in limits.h */ + rfbClientToServerTightMsg msg; + + memset(path, 0, sizeof(path)); + memset(&msg, 0, sizeof(rfbClientToServerTightMsg)); + + if(cl == NULL) { + + rfbLog("File [%s]: Method [%s]: Unexpected error:: rfbClientPtr is null\n", + __FILE__, __FUNCTION__); + return; + } + + if((n = rfbReadExact(cl, ((char *)&msg)+1, sz_rfbFileDownloadRequestMsg-1)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading dir name length\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + + msg.fdr.fNameSize = Swap16IfLE(msg.fdr.fNameSize); + msg.fdr.position = Swap16IfLE(msg.fdr.position); + + if ((msg.fdr.fNameSize == 0) || + (msg.fdr.fNameSize > (PATH_MAX - 1))) { + + rfbLog("File [%s]: Method [%s]: Error: path length is greater than" + " PATH_MAX\n", __FILE__, __FUNCTION__); + + HandleFileDownloadLengthError(cl, msg.fdr.fNameSize); + return; + } + + if((n = rfbReadExact(cl, rtcp->rcft.rcfd.fName, msg.fdr.fNameSize)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading dir name length\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + rtcp->rcft.rcfd.fName[msg.fdr.fNameSize] = '\0'; + + if(ConvertPath(rtcp->rcft.rcfd.fName) == NULL) { + + rfbLog("File [%s]: Method [%s]: Unexpected error: path is NULL", + __FILE__, __FUNCTION__); + + + /* This condition can come only if the file path is greater than + PATH_MAX. So sending file path length error msg back to client. + */ + + SendFileDownloadLengthErrMsg(cl); + return; + } + + HandleFileDownload(cl, rtcp); + +} + + +void +HandleFileDownloadLengthError(rfbClientPtr cl, short fNameSize) +{ + char *path = NULL; + int n = 0; + + if((path = (char*) calloc(fNameSize, sizeof(char))) == NULL) { + rfbLog("File [%s]: Method [%s]: Fatal Error: Alloc failed\n", + __FILE__, __FUNCTION__); + return; + } + if((n = rfbReadExact(cl, path, fNameSize)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading dir name\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + + if(path != NULL) { + free(path); + path = NULL; + } + + return; + } + + if(path != NULL) { + free(path); + path = NULL; + } + + SendFileDownloadLengthErrMsg(cl); +} + + +void +SendFileDownloadLengthErrMsg(rfbClientPtr cl) +{ + FileTransferMsg fileDownloadErrMsg; + + memset(&fileDownloadErrMsg, 0 , sizeof(FileTransferMsg)); + + fileDownloadErrMsg = GetFileDownloadLengthErrResponseMsg(); + + if((fileDownloadErrMsg.data == NULL) || (fileDownloadErrMsg.length == 0)) { + rfbLog("File [%s]: Method [%s]: Unexpected error: fileDownloadErrMsg " + "is null\n", __FILE__, __FUNCTION__); + return; + } + + rfbWriteExact(cl, fileDownloadErrMsg.data, fileDownloadErrMsg.length); + + FreeFileTransferMsg(fileDownloadErrMsg); +} + +extern rfbTightClientPtr rfbGetTightClientData(rfbClientPtr cl); + +void* +RunFileDownloadThread(void* client) +{ + rfbClientPtr cl = (rfbClientPtr) client; + rfbTightClientPtr rtcp = rfbGetTightClientData(cl); + FileTransferMsg fileDownloadMsg; + + if(rtcp == NULL) + return NULL; + + memset(&fileDownloadMsg, 0, sizeof(FileTransferMsg)); + do { + pthread_mutex_lock(&fileDownloadMutex); + fileDownloadMsg = GetFileDownloadResponseMsgInBlocks(cl, rtcp); + pthread_mutex_unlock(&fileDownloadMutex); + + if((fileDownloadMsg.data != NULL) && (fileDownloadMsg.length != 0)) { + if(rfbWriteExact(cl, fileDownloadMsg.data, fileDownloadMsg.length) < 0) { + rfbLog("File [%s]: Method [%s]: Error while writing to socket \n" + , __FILE__, __FUNCTION__); + + if(cl != NULL) { + rfbCloseClient(cl); + CloseUndoneFileTransfer(cl, rtcp); + } + + FreeFileTransferMsg(fileDownloadMsg); + return NULL; + } + FreeFileTransferMsg(fileDownloadMsg); + } + } while(rtcp->rcft.rcfd.downloadInProgress == TRUE); + return NULL; +} + + +void +HandleFileDownload(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + pthread_t fileDownloadThread; + FileTransferMsg fileDownloadMsg; + + memset(&fileDownloadMsg, 0, sizeof(FileTransferMsg)); + fileDownloadMsg = ChkFileDownloadErr(cl, rtcp); + if((fileDownloadMsg.data != NULL) && (fileDownloadMsg.length != 0)) { + rfbWriteExact(cl, fileDownloadMsg.data, fileDownloadMsg.length); + FreeFileTransferMsg(fileDownloadMsg); + return; + } + rtcp->rcft.rcfd.downloadInProgress = FALSE; + rtcp->rcft.rcfd.downloadFD = -1; + + if(pthread_create(&fileDownloadThread, NULL, RunFileDownloadThread, (void*) + cl) != 0) { + FileTransferMsg ftm = GetFileDownLoadErrMsg(); + + rfbLog("File [%s]: Method [%s]: Download thread creation failed\n", + __FILE__, __FUNCTION__); + + if((ftm.data != NULL) && (ftm.length != 0)) { + rfbWriteExact(cl, ftm.data, ftm.length); + FreeFileTransferMsg(ftm); + return; + } + + } + +} + + +/****************************************************************************** + * Methods to Handle File Download Cancel Request. + ******************************************************************************/ + + +void +HandleFileDownloadCancelRequest(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + int n = 0; + char *reason = NULL; + rfbClientToServerTightMsg msg; + + memset(&msg, 0, sizeof(rfbClientToServerTightMsg)); + + if((n = rfbReadExact(cl, ((char *)&msg)+1, sz_rfbFileDownloadCancelMsg-1)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading " + "FileDownloadCancelMsg\n", __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + + msg.fdc.reasonLen = Swap16IfLE(msg.fdc.reasonLen); + + if(msg.fdc.reasonLen == 0) { + rfbLog("File [%s]: Method [%s]: reason length received is Zero\n", + __FILE__, __FUNCTION__); + return; + } + + reason = (char*) calloc(msg.fdc.reasonLen + 1, sizeof(char)); + if(reason == NULL) { + rfbLog("File [%s]: Method [%s]: Fatal Error: Memory alloc failed\n", + __FILE__, __FUNCTION__); + return; + } + + if((n = rfbReadExact(cl, reason, msg.fdc.reasonLen)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading " + "FileDownloadCancelMsg\n", __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + } + + rfbLog("File [%s]: Method [%s]: File Download Cancel Request received:" + " reason <%s>\n", __FILE__, __FUNCTION__, reason); + + pthread_mutex_lock(&fileDownloadMutex); + CloseUndoneFileTransfer(cl, rtcp); + pthread_mutex_unlock(&fileDownloadMutex); + + if(reason != NULL) { + free(reason); + reason = NULL; + } + +} + + +/****************************************************************************** + * Methods to Handle File upload request + ******************************************************************************/ + +#ifdef TODO +void HandleFileUploadRequest(rfbClientPtr cl); +#endif +void HandleFileUpload(rfbClientPtr cl, rfbTightClientPtr data); +void HandleFileUploadLengthError(rfbClientPtr cl, short fNameSize); +void SendFileUploadLengthErrMsg(rfbClientPtr cl); + + +void +HandleFileUploadRequest(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + int n = 0; + char path[PATH_MAX]; /* PATH_MAX has the value 4096 and is defined in limits.h */ + rfbClientToServerTightMsg msg; + + memset(path, 0, PATH_MAX); + memset(&msg, 0, sizeof(rfbClientToServerTightMsg)); + + if(cl == NULL) { + rfbLog("File [%s]: Method [%s]: Unexpected error: rfbClientPtr is null\n", + __FILE__, __FUNCTION__); + return; + } + + if((n = rfbReadExact(cl, ((char *)&msg)+1, sz_rfbFileUploadRequestMsg-1)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading FileUploadRequestMsg\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + + msg.fupr.fNameSize = Swap16IfLE(msg.fupr.fNameSize); + msg.fupr.position = Swap16IfLE(msg.fupr.position); + + if ((msg.fupr.fNameSize == 0) || + (msg.fupr.fNameSize > (PATH_MAX - 1))) { + + rfbLog("File [%s]: Method [%s]: error: path length is greater than PATH_MAX\n", + __FILE__, __FUNCTION__); + HandleFileUploadLengthError(cl, msg.fupr.fNameSize); + return; + } + + if((n = rfbReadExact(cl, rtcp->rcft.rcfu.fName, msg.fupr.fNameSize)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading FileUploadRequestMsg\n" + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + rtcp->rcft.rcfu.fName[msg.fupr.fNameSize] = '\0'; + + if(ConvertPath(rtcp->rcft.rcfu.fName) == NULL) { + rfbLog("File [%s]: Method [%s]: Unexpected error: path is NULL\n", + __FILE__, __FUNCTION__); + + /* This may come if the path length exceeds PATH_MAX. + So sending path length error to client + */ + SendFileUploadLengthErrMsg(cl); + return; + } + + HandleFileUpload(cl, rtcp); +} + + +void +HandleFileUploadLengthError(rfbClientPtr cl, short fNameSize) +{ + char *path = NULL; + int n = 0; + + if((path = (char*) calloc(fNameSize, sizeof(char))) == NULL) { + rfbLog("File [%s]: Method [%s]: Fatal Error: Alloc failed\n", + __FILE__, __FUNCTION__); + return; + } + if((n = rfbReadExact(cl, path, fNameSize)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading dir name\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + + if(path != NULL) { + free(path); + path = NULL; + } + + return; + } + + rfbLog("File [%s]: Method [%s]: File Upload Length Error occured" + "file path requested is <%s>\n", __FILE__, __FUNCTION__, path); + + if(path != NULL) { + free(path); + path = NULL; + } + + SendFileUploadLengthErrMsg(cl); +} + +void +SendFileUploadLengthErrMsg(rfbClientPtr cl) +{ + + FileTransferMsg fileUploadErrMsg; + + memset(&fileUploadErrMsg, 0, sizeof(FileTransferMsg)); + fileUploadErrMsg = GetFileUploadLengthErrResponseMsg(); + + if((fileUploadErrMsg.data == NULL) || (fileUploadErrMsg.length == 0)) { + rfbLog("File [%s]: Method [%s]: Unexpected error: fileUploadErrMsg is null\n", + __FILE__, __FUNCTION__); + return; + } + + rfbWriteExact(cl, fileUploadErrMsg.data, fileUploadErrMsg.length); + FreeFileTransferMsg(fileUploadErrMsg); +} + +void +HandleFileUpload(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + FileTransferMsg fileUploadErrMsg; + + memset(&fileUploadErrMsg, 0, sizeof(FileTransferMsg)); + + rtcp->rcft.rcfu.uploadInProgress = FALSE; + rtcp->rcft.rcfu.uploadFD = -1; + + fileUploadErrMsg = ChkFileUploadErr(cl, rtcp); + if((fileUploadErrMsg.data != NULL) && (fileUploadErrMsg.length != 0)) { + rfbWriteExact(cl, fileUploadErrMsg.data, fileUploadErrMsg.length); + FreeFileTransferMsg(fileUploadErrMsg); + } +} + + +/****************************************************************************** + * Methods to Handle File Upload Data Request + *****************************************************************************/ + +void HandleFileUploadWrite(rfbClientPtr cl, rfbTightClientPtr rtcp, char* pBuf); + + +void +HandleFileUploadDataRequest(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + int n = 0; + char* pBuf = NULL; + rfbClientToServerTightMsg msg; + + memset(&msg, 0, sizeof(rfbClientToServerTightMsg)); + + if(cl == NULL) { + rfbLog("File [%s]: Method [%s]: Unexpected error: rfbClientPtr is null\n", + __FILE__, __FUNCTION__); + return; + } + + if((n = rfbReadExact(cl, ((char *)&msg)+1, sz_rfbFileUploadDataMsg-1)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading FileUploadRequestMsg\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + + msg.fud.realSize = Swap16IfLE(msg.fud.realSize); + msg.fud.compressedSize = Swap16IfLE(msg.fud.compressedSize); + if((msg.fud.realSize == 0) && (msg.fud.compressedSize == 0)) { + if((n = rfbReadExact(cl, (char*)&(rtcp->rcft.rcfu.mTime), sizeof(unsigned + long))) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading FileUploadRequestMsg\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + + FileUpdateComplete(cl, rtcp); + return; + } + + pBuf = (char*) calloc(msg.fud.compressedSize, sizeof(char)); + if(pBuf == NULL) { + rfbLog("File [%s]: Method [%s]: Memory alloc failed\n", __FILE__, __FUNCTION__); + return; + } + if((n = rfbReadExact(cl, pBuf, msg.fud.compressedSize)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading FileUploadRequestMsg\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + + if(pBuf != NULL) { + free(pBuf); + pBuf = NULL; + } + + return; + } + if(msg.fud.compressedLevel != 0) { + FileTransferMsg ftm; + memset(&ftm, 0, sizeof(FileTransferMsg)); + + ftm = GetFileUploadCompressedLevelErrMsg(); + + if((ftm.data != NULL) && (ftm.length != 0)) { + rfbWriteExact(cl, ftm.data, ftm.length); + FreeFileTransferMsg(ftm); + } + + CloseUndoneFileTransfer(cl, rtcp); + + if(pBuf != NULL) { + free(pBuf); + pBuf = NULL; + } + + return; + } + + rtcp->rcft.rcfu.fSize = msg.fud.compressedSize; + + HandleFileUploadWrite(cl, rtcp, pBuf); + + if(pBuf != NULL) { + free(pBuf); + pBuf = NULL; + } + +} + + +void +HandleFileUploadWrite(rfbClientPtr cl, rfbTightClientPtr rtcp, char* pBuf) +{ + FileTransferMsg ftm; + memset(&ftm, 0, sizeof(FileTransferMsg)); + + ftm = ChkFileUploadWriteErr(cl, rtcp, pBuf); + + if((ftm.data != NULL) && (ftm.length != 0)) { + rfbWriteExact(cl, ftm.data, ftm.length); + FreeFileTransferMsg(ftm); + } +} + + +/****************************************************************************** + * Methods to Handle File Upload Failed Request. + ******************************************************************************/ + + +void +HandleFileUploadFailedRequest(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + int n = 0; + char* reason = NULL; + rfbClientToServerTightMsg msg; + + memset(&msg, 0, sizeof(rfbClientToServerTightMsg)); + + if(cl == NULL) { + rfbLog("File [%s]: Method [%s]: Unexpected error: rfbClientPtr is null\n", + __FILE__, __FUNCTION__); + return; + } + + if((n = rfbReadExact(cl, ((char *)&msg)+1, sz_rfbFileUploadFailedMsg-1)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading FileUploadFailedMsg\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + + msg.fuf.reasonLen = Swap16IfLE(msg.fuf.reasonLen); + if(msg.fuf.reasonLen == 0) { + rfbLog("File [%s]: Method [%s]: reason length received is Zero\n", + __FILE__, __FUNCTION__); + return; + } + + + reason = (char*) calloc(msg.fuf.reasonLen + 1, sizeof(char)); + if(reason == NULL) { + rfbLog("File [%s]: Method [%s]: Memory alloc failed\n", __FILE__, __FUNCTION__); + return; + } + + if((n = rfbReadExact(cl, reason, msg.fuf.reasonLen)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading FileUploadFailedMsg\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + + if(reason != NULL) { + free(reason); + reason = NULL; + } + + return; + } + + rfbLog("File [%s]: Method [%s]: File Upload Failed Request received:" + " reason <%s>\n", __FILE__, __FUNCTION__, reason); + + CloseUndoneFileTransfer(cl, rtcp); + + if(reason != NULL) { + free(reason); + reason = NULL; + } + +} + + +/****************************************************************************** + * Methods to Handle File Create Request. + ******************************************************************************/ + + +void +HandleFileCreateDirRequest(rfbClientPtr cl, rfbTightClientPtr rtcp) +{ + int n = 0; + char dirName[PATH_MAX]; + rfbClientToServerTightMsg msg; + + memset(dirName, 0, PATH_MAX); + memset(&msg, 0, sizeof(rfbClientToServerTightMsg)); + + if(cl == NULL) { + rfbLog("File [%s]: Method [%s]: Unexpected error: rfbClientPtr is null\n", + __FILE__, __FUNCTION__); + return; + } + + if((n = rfbReadExact(cl, ((char *)&msg)+1, sz_rfbFileCreateDirRequestMsg-1)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading FileCreateDirRequestMsg\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + + msg.fcdr.dNameLen = Swap16IfLE(msg.fcdr.dNameLen); + + /* TODO :: chk if the dNameLen is greater than PATH_MAX */ + + if((n = rfbReadExact(cl, dirName, msg.fcdr.dNameLen)) <= 0) { + + if (n < 0) + rfbLog("File [%s]: Method [%s]: Error while reading FileUploadFailedMsg\n", + __FILE__, __FUNCTION__); + + rfbCloseClient(cl); + return; + } + + if(ConvertPath(dirName) == NULL) { + rfbLog("File [%s]: Method [%s]: Unexpected error: path is NULL\n", + __FILE__, __FUNCTION__); + + return; + } + + CreateDirectory(dirName); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/handlefiletransferrequest.h b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/handlefiletransferrequest.h new file mode 100644 index 0000000..74c0e8a --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/handlefiletransferrequest.h @@ -0,0 +1,47 @@ +/* + * Copyright (c) 2005 Novell, Inc. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, + * you may find current contact information at www.novell.com + * + * Author : Rohit Kumar + * Email ID : rokumar@novell.com + * Date : 14th July 2005 + */ + +#ifndef HANDLE_FILE_TRANSFER_REQUEST_H +#define HANDLE_FILE_TRANSFER_REQUEST_H + + +#include + + +void InitFileTransfer(); +int SetFtpRoot(char* path); +void EnableFileTransfer(rfbBool enable); +rfbBool IsFileTransferEnabled(); +char* GetFtpRoot(); + +void HandleFileListRequest(rfbClientPtr cl, rfbTightClientRec* data); +void HandleFileDownloadRequest(rfbClientPtr cl, rfbTightClientRec* data); +void HandleFileDownloadCancelRequest(rfbClientPtr cl, rfbTightClientRec* data); +void HandleFileUploadRequest(rfbClientPtr cl, rfbTightClientRec* data); +void HandleFileUploadDataRequest(rfbClientPtr cl, rfbTightClientRec* data); +void HandleFileUploadFailedRequest(rfbClientPtr cl, rfbTightClientRec* data); +void HandleFileCreateDirRequest(rfbClientPtr cl, rfbTightClientRec* data); + +#endif + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/rfbtightproto.h b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/rfbtightproto.h new file mode 100644 index 0000000..ef683ae --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/rfbtightproto.h @@ -0,0 +1,456 @@ +/* + * Copyright (c) 2005 Novell, Inc. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, + * you may find current contact information at www.novell.com + * + * Author : Rohit Kumar + * Email ID : rokumar@novell.com + * Date : 25th August 2005 + */ + +#ifndef RFBTIGHTPROTO_H +#define RFBTIGHTPROTO_H + +#include +#include + +/* PATH_MAX is not defined in limits.h on some platforms */ +#ifndef PATH_MAX +#define PATH_MAX 4096 +#endif + + +#define rfbSecTypeTight 16 + +void rfbTightUsage(void); +int rfbTightProcessArgs(int argc, char *argv[]); + +/*----------------------------------------------------------------------------- + * Negotiation of Tunneling Capabilities (protocol version 3.7t) + * + * If the chosen security type is rfbSecTypeTight, the server sends a list of + * supported tunneling methods ("tunneling" refers to any additional layer of + * data transformation, such as encryption or external compression.) + * + * nTunnelTypes specifies the number of following rfbCapabilityInfo structures + * that list all supported tunneling methods in the order of preference. + * + * NOTE: If nTunnelTypes is 0, that tells the client that no tunneling can be + * used, and the client should not send a response requesting a tunneling + * method. + */ + +typedef struct _rfbTunnelingCapsMsg { + uint32_t nTunnelTypes; + /* followed by nTunnelTypes * rfbCapabilityInfo structures */ +} rfbTunnelingCapsMsg; + +#define sz_rfbTunnelingCapsMsg 4 + +/*----------------------------------------------------------------------------- + * Tunneling Method Request (protocol version 3.7t) + * + * If the list of tunneling capabilities sent by the server was not empty, the + * client should reply with a 32-bit code specifying a particular tunneling + * method. The following code should be used for no tunneling. + */ + +#define rfbNoTunneling 0 +#define sig_rfbNoTunneling "NOTUNNEL" + + +/*----------------------------------------------------------------------------- + * Negotiation of Authentication Capabilities (protocol version 3.7t) + * + * After setting up tunneling, the server sends a list of supported + * authentication schemes. + * + * nAuthTypes specifies the number of following rfbCapabilityInfo structures + * that list all supported authentication schemes in the order of preference. + * + * NOTE: If nAuthTypes is 0, that tells the client that no authentication is + * necessary, and the client should not send a response requesting an + * authentication scheme. + */ + +typedef struct _rfbAuthenticationCapsMsg { + uint32_t nAuthTypes; + /* followed by nAuthTypes * rfbCapabilityInfo structures */ +} rfbAuthenticationCapsMsg; + +#define sz_rfbAuthenticationCapsMsg 4 + +/*----------------------------------------------------------------------------- + * Authentication Scheme Request (protocol version 3.7t) + * + * If the list of authentication capabilities sent by the server was not empty, + * the client should reply with a 32-bit code specifying a particular + * authentication scheme. The following codes are supported. + */ + +#define rfbAuthNone 1 +#define rfbAuthVNC 2 +#define rfbAuthUnixLogin 129 +#define rfbAuthExternal 130 + +#define sig_rfbAuthNone "NOAUTH__" +#define sig_rfbAuthVNC "VNCAUTH_" +#define sig_rfbAuthUnixLogin "ULGNAUTH" +#define sig_rfbAuthExternal "XTRNAUTH" + +/*----------------------------------------------------------------------------- + * Structure used to describe protocol options such as tunneling methods, + * authentication schemes and message types (protocol version 3.7t). + */ + +typedef struct _rfbCapabilityInfo { + + uint32_t code; /* numeric identifier */ + uint8_t vendorSignature[4]; /* vendor identification */ + uint8_t nameSignature[8]; /* abbreviated option name */ + +} rfbCapabilityInfo; + +#define sz_rfbCapabilityInfoVendor 4 +#define sz_rfbCapabilityInfoName 8 +#define sz_rfbCapabilityInfo 16 + +/* + * Vendors known by TightVNC: standard VNC/RealVNC, TridiaVNC, and TightVNC. + */ + +#define rfbStandardVendor "STDV" +#define rfbTridiaVncVendor "TRDV" +#define rfbTightVncVendor "TGHT" + + +/* It's a good idea to keep these values a bit greater than required. */ +#define MAX_TIGHT_ENCODINGS 10 +#define MAX_TUNNELING_CAPS 16 +#define MAX_AUTH_CAPS 16 + +typedef struct _rfbClientFileDownload { + char fName[PATH_MAX]; + int downloadInProgress; + unsigned long mTime; + int downloadFD; +} rfbClientFileDownload ; + +typedef struct _rfbClientFileUpload { + char fName[PATH_MAX]; + int uploadInProgress; + unsigned long mTime; + unsigned long fSize; + int uploadFD; +} rfbClientFileUpload ; + +typedef struct _rfbClientFileTransfer { + rfbClientFileDownload rcfd; + rfbClientFileUpload rcfu; +} rfbClientFileTransfer; + + +typedef struct _rfbTightClientRec { + + /* Lists of capability codes sent to clients. We remember these + lists to restrict clients from choosing those tunneling and + authentication types that were not advertised. */ + + int nAuthCaps; + uint32_t authCaps[MAX_AUTH_CAPS]; + + /* This is not useful while we don't support tunneling: + int nTunnelingCaps; + uint32_t tunnelingCaps[MAX_TUNNELING_CAPS]; */ + + rfbClientFileTransfer rcft; + +} rfbTightClientRec, *rfbTightClientPtr; + +/* + * Macro to fill in an rfbCapabilityInfo structure (protocol 3.7t). + * Normally, using macros is no good, but this macro saves us from + * writing constants twice -- it constructs signature names from codes. + * Note that "code_sym" argument should be a single symbol, not an expression. + */ + +#define SetCapInfo(cap_ptr, code_sym, vendor) \ +{ \ + rfbCapabilityInfo *pcap; \ + pcap = (cap_ptr); \ + pcap->code = Swap32IfLE(code_sym); \ + memcpy(pcap->vendorSignature, (vendor), \ + sz_rfbCapabilityInfoVendor); \ + memcpy(pcap->nameSignature, sig_##code_sym, \ + sz_rfbCapabilityInfoName); \ +} + +void rfbHandleSecTypeTight(rfbClientPtr cl); + + +/*----------------------------------------------------------------------------- + * Server Interaction Capabilities Message (protocol version 3.7t) + * + * In the protocol version 3.7t, the server informs the client what message + * types it supports in addition to ones defined in the protocol version 3.7. + * Also, the server sends the list of all supported encodings (note that it's + * not necessary to advertise the "raw" encoding sinse it MUST be supported in + * RFB 3.x protocols). + * + * This data immediately follows the server initialisation message. + */ + +typedef struct _rfbInteractionCapsMsg { + uint16_t nServerMessageTypes; + uint16_t nClientMessageTypes; + uint16_t nEncodingTypes; + uint16_t pad; /* reserved, must be 0 */ + /* followed by nServerMessageTypes * rfbCapabilityInfo structures */ + /* followed by nClientMessageTypes * rfbCapabilityInfo structures */ +} rfbInteractionCapsMsg; + +#define sz_rfbInteractionCapsMsg 8 + +#define rfbFileListData 130 +#define rfbFileDownloadData 131 +#define rfbFileUploadCancel 132 +#define rfbFileDownloadFailed 133 + +/* signatures for non-standard messages */ +#define sig_rfbFileListData "FTS_LSDT" +#define sig_rfbFileDownloadData "FTS_DNDT" +#define sig_rfbFileUploadCancel "FTS_UPCN" +#define sig_rfbFileDownloadFailed "FTS_DNFL" + + + +#define rfbFileListRequest 130 +#define rfbFileDownloadRequest 131 +#define rfbFileUploadRequest 132 +#define rfbFileUploadData 133 +#define rfbFileDownloadCancel 134 +#define rfbFileUploadFailed 135 +#define rfbFileCreateDirRequest 136 + +/* signatures for non-standard messages */ +#define sig_rfbFileListRequest "FTC_LSRQ" +#define sig_rfbFileDownloadRequest "FTC_DNRQ" +#define sig_rfbFileUploadRequest "FTC_UPRQ" +#define sig_rfbFileUploadData "FTC_UPDT" +#define sig_rfbFileDownloadCancel "FTC_DNCN" +#define sig_rfbFileUploadFailed "FTC_UPFL" +#define sig_rfbFileCreateDirRequest "FTC_FCDR" + + +/* signatures for basic encoding types */ +#define sig_rfbEncodingRaw "RAW_____" +#define sig_rfbEncodingCopyRect "COPYRECT" +#define sig_rfbEncodingRRE "RRE_____" +#define sig_rfbEncodingCoRRE "CORRE___" +#define sig_rfbEncodingHextile "HEXTILE_" +#define sig_rfbEncodingZlib "ZLIB____" +#define sig_rfbEncodingTight "TIGHT___" +#define sig_rfbEncodingZlibHex "ZLIBHEX_" + + +/* signatures for "fake" encoding types */ +#define sig_rfbEncodingCompressLevel0 "COMPRLVL" +#define sig_rfbEncodingXCursor "X11CURSR" +#define sig_rfbEncodingRichCursor "RCHCURSR" +#define sig_rfbEncodingPointerPos "POINTPOS" +#define sig_rfbEncodingLastRect "LASTRECT" +#define sig_rfbEncodingNewFBSize "NEWFBSIZ" +#define sig_rfbEncodingQualityLevel0 "JPEGQLVL" + + +/*----------------------------------------------------------------------------- + * FileListRequest + */ + +typedef struct _rfbFileListRequestMsg { + uint8_t type; + uint8_t flags; + uint16_t dirNameSize; + /* Followed by char Dirname[dirNameSize] */ +} rfbFileListRequestMsg; + +#define sz_rfbFileListRequestMsg 4 + +/*----------------------------------------------------------------------------- + * FileDownloadRequest + */ + +typedef struct _rfbFileDownloadRequestMsg { + uint8_t type; + uint8_t compressedLevel; + uint16_t fNameSize; + uint32_t position; + /* Followed by char Filename[fNameSize] */ +} rfbFileDownloadRequestMsg; + +#define sz_rfbFileDownloadRequestMsg 8 + +/*----------------------------------------------------------------------------- + * FileUploadRequest + */ + +typedef struct _rfbFileUploadRequestMsg { + uint8_t type; + uint8_t compressedLevel; + uint16_t fNameSize; + uint32_t position; + /* Followed by char Filename[fNameSize] */ +} rfbFileUploadRequestMsg; + +#define sz_rfbFileUploadRequestMsg 8 + + +/*----------------------------------------------------------------------------- + * FileUploadData + */ + +typedef struct _rfbFileUploadDataMsg { + uint8_t type; + uint8_t compressedLevel; + uint16_t realSize; + uint16_t compressedSize; + /* Followed by File[compressedSize], + but if (realSize = compressedSize = 0) followed by uint32_t modTime */ +} rfbFileUploadDataMsg; + +#define sz_rfbFileUploadDataMsg 6 + +/*----------------------------------------------------------------------------- + * FileDownloadCancel + */ + +typedef struct _rfbFileDownloadCancelMsg { + uint8_t type; + uint8_t unused; + uint16_t reasonLen; + /* Followed by reason[reasonLen] */ +} rfbFileDownloadCancelMsg; + +#define sz_rfbFileDownloadCancelMsg 4 + +/*----------------------------------------------------------------------------- + * FileUploadFailed + */ + +typedef struct _rfbFileUploadFailedMsg { + uint8_t type; + uint8_t unused; + uint16_t reasonLen; + /* Followed by reason[reasonLen] */ +} rfbFileUploadFailedMsg; + +#define sz_rfbFileUploadFailedMsg 4 + +/*----------------------------------------------------------------------------- + * FileCreateDirRequest + */ + +typedef struct _rfbFileCreateDirRequestMsg { + uint8_t type; + uint8_t unused; + uint16_t dNameLen; + /* Followed by dName[dNameLen] */ +} rfbFileCreateDirRequestMsg; + +#define sz_rfbFileCreateDirRequestMsg 4 + + +/*----------------------------------------------------------------------------- + * Union of all client->server messages. + */ + +typedef union _rfbClientToServerTightMsg { + rfbFileListRequestMsg flr; + rfbFileDownloadRequestMsg fdr; + rfbFileUploadRequestMsg fupr; + rfbFileUploadDataMsg fud; + rfbFileDownloadCancelMsg fdc; + rfbFileUploadFailedMsg fuf; + rfbFileCreateDirRequestMsg fcdr; +} rfbClientToServerTightMsg; + + + +/*----------------------------------------------------------------------------- + * FileListData + */ + +typedef struct _rfbFileListDataMsg { + uint8_t type; + uint8_t flags; + uint16_t numFiles; + uint16_t dataSize; + uint16_t compressedSize; + /* Followed by SizeData[numFiles] */ + /* Followed by Filenames[compressedSize] */ +} rfbFileListDataMsg; + +#define sz_rfbFileListDataMsg 8 + +/*----------------------------------------------------------------------------- + * FileDownloadData + */ + +typedef struct _rfbFileDownloadDataMsg { + uint8_t type; + uint8_t compressLevel; + uint16_t realSize; + uint16_t compressedSize; + /* Followed by File[copressedSize], + but if (realSize = compressedSize = 0) followed by uint32_t modTime */ +} rfbFileDownloadDataMsg; + +#define sz_rfbFileDownloadDataMsg 6 + + +/*----------------------------------------------------------------------------- + * FileUploadCancel + */ + +typedef struct _rfbFileUploadCancelMsg { + uint8_t type; + uint8_t unused; + uint16_t reasonLen; + /* Followed by reason[reasonLen] */ +} rfbFileUploadCancelMsg; + +#define sz_rfbFileUploadCancelMsg 4 + +/*----------------------------------------------------------------------------- + * FileDownloadFailed + */ + +typedef struct _rfbFileDownloadFailedMsg { + uint8_t type; + uint8_t unused; + uint16_t reasonLen; + /* Followed by reason[reasonLen] */ +} rfbFileDownloadFailedMsg; + +#define sz_rfbFileDownloadFailedMsg 4 + + + + +#endif + + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/rfbtightserver.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/rfbtightserver.c new file mode 100644 index 0000000..d43d3f3 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/tightvnc-filetransfer/rfbtightserver.c @@ -0,0 +1,546 @@ +/* + * Copyright (c) 2005 Novell, Inc. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, contact Novell, Inc. + * + * To contact Novell about this file by physical or electronic mail, + * you may find current contact information at www.novell.com + * + * Author : Rohit Kumar + * Email ID : rokumar@novell.com + * Date : 25th August 2005 + */ + + +#include +#include "rfbtightproto.h" +#include "handlefiletransferrequest.h" + +/* + * Get my data! + * + * This gets the extension specific data from the client structure. If + * the data is not found, the client connection is closed, a complaint + * is logged, and NULL is returned. + */ + +extern rfbProtocolExtension tightVncFileTransferExtension; + +rfbTightClientPtr +rfbGetTightClientData(rfbClientPtr cl) +{ + rfbTightClientPtr rtcp = (rfbTightClientPtr) + rfbGetExtensionClientData(cl, + &tightVncFileTransferExtension); + if(rtcp == NULL) { + rfbLog("Extension client data is null, closing the connection !\n"); + rfbCloseClient(cl); + } + + return rtcp; +} + +/* + * Send the authentication challenge. + */ + +static void +rfbVncAuthSendChallenge(rfbClientPtr cl) +{ + + rfbLog("tightvnc-filetransfer/rfbVncAuthSendChallenge\n"); + /* 4 byte header is alreay sent. Which is rfbSecTypeVncAuth (same as rfbVncAuth). Just send the challenge. */ + rfbRandomBytes(cl->authChallenge); + if (rfbWriteExact(cl, (char *)cl->authChallenge, CHALLENGESIZE) < 0) { + rfbLogPerror("rfbAuthNewClient: write"); + rfbCloseClient(cl); + return; + } + + /* Dispatch client input to rfbVncAuthProcessResponse. */ + /* This methos is defined in auth.c file */ + rfbAuthProcessClientMessage(cl); + +} + +/* + * LibVNCServer has a bug WRT Tight SecurityType and RFB 3.8 + * It should send auth result even for rfbAuthNone. + * See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=517422 + * For testing set USE_SECTYPE_TIGHT_FOR_RFB_3_8 when compiling + * or set it here. + */ +#define SECTYPE_TIGHT_FOR_RFB_3_8 \ + if (cl->protocolMajorVersion==3 && cl->protocolMinorVersion > 7) { \ + uint32_t authResult; \ + rfbLog("rfbProcessClientSecurityType: returning securityResult for client rfb version >= 3.8\n"); \ + authResult = Swap32IfLE(rfbVncAuthOK); \ + if (rfbWriteExact(cl, (char *)&authResult, 4) < 0) { \ + rfbLogPerror("rfbAuthProcessClientMessage: write"); \ + rfbCloseClient(cl); \ + return; \ + } \ + } + +/* + Enabled by runge on 2010/01/02 + */ +#define USE_SECTYPE_TIGHT_FOR_RFB_3_8 + +/* + * Read client's preferred authentication type (protocol 3.7t). + */ + +void +rfbProcessClientAuthType(rfbClientPtr cl) +{ + uint32_t auth_type; + int n, i; + rfbTightClientPtr rtcp = rfbGetTightClientData(cl); + + rfbLog("tightvnc-filetransfer/rfbProcessClientAuthType\n"); + + if(rtcp == NULL) + return; + + /* Read authentication type selected by the client. */ + n = rfbReadExact(cl, (char *)&auth_type, sizeof(auth_type)); + if (n <= 0) { + if (n == 0) + rfbLog("rfbProcessClientAuthType: client gone\n"); + else + rfbLogPerror("rfbProcessClientAuthType: read"); + rfbCloseClient(cl); + return; + } + auth_type = Swap32IfLE(auth_type); + + /* Make sure it was present in the list sent by the server. */ + for (i = 0; i < rtcp->nAuthCaps; i++) { + if (auth_type == rtcp->authCaps[i]) + break; + } + if (i >= rtcp->nAuthCaps) { + rfbLog("rfbProcessClientAuthType: " + "wrong authentication type requested\n"); + rfbCloseClient(cl); + return; + } + + switch (auth_type) { + case rfbAuthNone: + /* Dispatch client input to rfbProcessClientInitMessage. */ +#ifdef USE_SECTYPE_TIGHT_FOR_RFB_3_8 + SECTYPE_TIGHT_FOR_RFB_3_8 +#endif + cl->state = RFB_INITIALISATION; + break; + case rfbAuthVNC: + rfbVncAuthSendChallenge(cl); + break; + default: + rfbLog("rfbProcessClientAuthType: unknown authentication scheme\n"); + rfbCloseClient(cl); + } +} + + +/* + * Read tunneling type requested by the client (protocol 3.7t). + * NOTE: Currently, we don't support tunneling, and this function + * can never be called. + */ + +void +rfbProcessClientTunnelingType(rfbClientPtr cl) +{ + /* If we were called, then something's really wrong. */ + rfbLog("rfbProcessClientTunnelingType: not implemented\n"); + rfbCloseClient(cl); + return; +} + + +/* + * Send the list of our authentication capabilities to the client + * (protocol 3.7t). + */ + +static void +rfbSendAuthCaps(rfbClientPtr cl) +{ + rfbAuthenticationCapsMsg caps; + rfbCapabilityInfo caplist[MAX_AUTH_CAPS]; + int count = 0; + rfbTightClientPtr rtcp = rfbGetTightClientData(cl); + + rfbLog("tightvnc-filetransfer/rfbSendAuthCaps\n"); + + if(rtcp == NULL) + return; + + if (cl->screen->authPasswdData && !cl->reverseConnection) { + /* chk if this condition is valid or not. */ + SetCapInfo(&caplist[count], rfbAuthVNC, rfbStandardVendor); + rtcp->authCaps[count++] = rfbAuthVNC; + } + + rtcp->nAuthCaps = count; + caps.nAuthTypes = Swap32IfLE((uint32_t)count); + if (rfbWriteExact(cl, (char *)&caps, sz_rfbAuthenticationCapsMsg) < 0) { + rfbLogPerror("rfbSendAuthCaps: write"); + rfbCloseClient(cl); + return; + } + + if (count) { + if (rfbWriteExact(cl, (char *)&caplist[0], + count * sz_rfbCapabilityInfo) < 0) { + rfbLogPerror("rfbSendAuthCaps: write"); + rfbCloseClient(cl); + return; + } + /* Dispatch client input to rfbProcessClientAuthType. */ + /* Call the function for authentication from here */ + rfbProcessClientAuthType(cl); + } else { +#ifdef USE_SECTYPE_TIGHT_FOR_RFB_3_8 + SECTYPE_TIGHT_FOR_RFB_3_8 +#endif + /* Dispatch client input to rfbProcessClientInitMessage. */ + cl->state = RFB_INITIALISATION; + } +} + + +/* + * Send the list of our tunneling capabilities (protocol 3.7t). + */ + +static void +rfbSendTunnelingCaps(rfbClientPtr cl) +{ + rfbTunnelingCapsMsg caps; + uint32_t nTypes = 0; /* we don't support tunneling yet */ + + rfbLog("tightvnc-filetransfer/rfbSendTunnelingCaps\n"); + + caps.nTunnelTypes = Swap32IfLE(nTypes); + if (rfbWriteExact(cl, (char *)&caps, sz_rfbTunnelingCapsMsg) < 0) { + rfbLogPerror("rfbSendTunnelingCaps: write"); + rfbCloseClient(cl); + return; + } + + if (nTypes) { + /* Dispatch client input to rfbProcessClientTunnelingType(). */ + /* The flow should not reach here as tunneling is not implemented. */ + rfbProcessClientTunnelingType(cl); + } else { + rfbSendAuthCaps(cl); + } +} + + + +/* + * rfbSendInteractionCaps is called after sending the server + * initialisation message, only if TightVNC protocol extensions were + * enabled (protocol 3.7t). In this function, we send the lists of + * supported protocol messages and encodings. + */ + +/* Update these constants on changing capability lists below! */ +/* Values updated for FTP */ +#define N_SMSG_CAPS 4 +#define N_CMSG_CAPS 6 +#define N_ENC_CAPS 12 + +void +rfbSendInteractionCaps(rfbClientPtr cl) +{ + rfbInteractionCapsMsg intr_caps; + rfbCapabilityInfo smsg_list[N_SMSG_CAPS]; + rfbCapabilityInfo cmsg_list[N_CMSG_CAPS]; + rfbCapabilityInfo enc_list[N_ENC_CAPS]; + int i, n_enc_caps = N_ENC_CAPS; + + /* Fill in the header structure sent prior to capability lists. */ + intr_caps.nServerMessageTypes = Swap16IfLE(N_SMSG_CAPS); + intr_caps.nClientMessageTypes = Swap16IfLE(N_CMSG_CAPS); + intr_caps.nEncodingTypes = Swap16IfLE(N_ENC_CAPS); + intr_caps.pad = 0; + + rfbLog("tightvnc-filetransfer/rfbSendInteractionCaps\n"); + + /* Supported server->client message types. */ + /* For file transfer support: */ + i = 0; + if((IsFileTransferEnabled() == TRUE) && ( cl->viewOnly == FALSE)) { + SetCapInfo(&smsg_list[i++], rfbFileListData, rfbTightVncVendor); + SetCapInfo(&smsg_list[i++], rfbFileDownloadData, rfbTightVncVendor); + SetCapInfo(&smsg_list[i++], rfbFileUploadCancel, rfbTightVncVendor); + SetCapInfo(&smsg_list[i++], rfbFileDownloadFailed, rfbTightVncVendor); + if (i != N_SMSG_CAPS) { + rfbLog("rfbSendInteractionCaps: assertion failed, i != N_SMSG_CAPS\n"); + rfbCloseClient(cl); + return; + } + } + + /* Supported client->server message types. */ + /* For file transfer support: */ + i = 0; + if((IsFileTransferEnabled() == TRUE) && ( cl->viewOnly == FALSE)) { + SetCapInfo(&cmsg_list[i++], rfbFileListRequest, rfbTightVncVendor); + SetCapInfo(&cmsg_list[i++], rfbFileDownloadRequest, rfbTightVncVendor); + SetCapInfo(&cmsg_list[i++], rfbFileUploadRequest, rfbTightVncVendor); + SetCapInfo(&cmsg_list[i++], rfbFileUploadData, rfbTightVncVendor); + SetCapInfo(&cmsg_list[i++], rfbFileDownloadCancel, rfbTightVncVendor); + SetCapInfo(&cmsg_list[i++], rfbFileUploadFailed, rfbTightVncVendor); + if (i != N_CMSG_CAPS) { + rfbLog("rfbSendInteractionCaps: assertion failed, i != N_CMSG_CAPS\n"); + rfbCloseClient(cl); + return; + } + } + + /* Encoding types. */ + i = 0; + SetCapInfo(&enc_list[i++], rfbEncodingCopyRect, rfbStandardVendor); + SetCapInfo(&enc_list[i++], rfbEncodingRRE, rfbStandardVendor); + SetCapInfo(&enc_list[i++], rfbEncodingCoRRE, rfbStandardVendor); + SetCapInfo(&enc_list[i++], rfbEncodingHextile, rfbStandardVendor); +#ifdef LIBVNCSERVER_HAVE_LIBZ + SetCapInfo(&enc_list[i++], rfbEncodingZlib, rfbTridiaVncVendor); + SetCapInfo(&enc_list[i++], rfbEncodingTight, rfbTightVncVendor); +#else + n_enc_caps -= 2; +#endif + SetCapInfo(&enc_list[i++], rfbEncodingCompressLevel0, rfbTightVncVendor); + SetCapInfo(&enc_list[i++], rfbEncodingQualityLevel0, rfbTightVncVendor); + SetCapInfo(&enc_list[i++], rfbEncodingXCursor, rfbTightVncVendor); + SetCapInfo(&enc_list[i++], rfbEncodingRichCursor, rfbTightVncVendor); + SetCapInfo(&enc_list[i++], rfbEncodingPointerPos, rfbTightVncVendor); + SetCapInfo(&enc_list[i++], rfbEncodingLastRect, rfbTightVncVendor); + if (i != n_enc_caps) { + rfbLog("rfbSendInteractionCaps: assertion failed, i != N_ENC_CAPS\n"); + rfbCloseClient(cl); + return; + } + + /* Send header and capability lists */ + if (rfbWriteExact(cl, (char *)&intr_caps, + sz_rfbInteractionCapsMsg) < 0 || + rfbWriteExact(cl, (char *)&smsg_list[0], + sz_rfbCapabilityInfo * N_SMSG_CAPS) < 0 || + rfbWriteExact(cl, (char *)&cmsg_list[0], + sz_rfbCapabilityInfo * N_CMSG_CAPS) < 0 || + rfbWriteExact(cl, (char *)&enc_list[0], + sz_rfbCapabilityInfo * N_ENC_CAPS) < 0) { + rfbLogPerror("rfbSendInteractionCaps: write"); + rfbCloseClient(cl); + return; + } + + /* Dispatch client input to rfbProcessClientNormalMessage(). */ + cl->state = RFB_NORMAL; +} + + + +rfbBool +rfbTightExtensionInit(rfbClientPtr cl, void* data) +{ + + rfbSendInteractionCaps(cl); + + return TRUE; +} + +static rfbBool +handleMessage(rfbClientPtr cl, + const char* messageName, + void (*handler)(rfbClientPtr cl, rfbTightClientPtr data)) +{ + rfbTightClientPtr data; + + rfbLog("tightvnc-filetransfer: %s message received\n", messageName); + + if((IsFileTransferEnabled() == FALSE) || ( cl->viewOnly == TRUE)) { + rfbCloseClient(cl); + return FALSE; + } + + data = rfbGetTightClientData(cl); + if(data == NULL) + return FALSE; + + handler(cl, data); + return TRUE; +} + +rfbBool +rfbTightExtensionMsgHandler(struct _rfbClientRec* cl, void* data, + const rfbClientToServerMsg* msg) +{ + switch (msg->type) { + + case rfbFileListRequest: + + return handleMessage(cl, "rfbFileListRequest", HandleFileListRequest); + + case rfbFileDownloadRequest: + + return handleMessage(cl, "rfbFileDownloadRequest", HandleFileDownloadRequest); + + case rfbFileUploadRequest: + + return handleMessage(cl, "rfbFileUploadRequest", HandleFileUploadRequest); + + case rfbFileUploadData: + + return handleMessage(cl, "rfbFileUploadDataRequest", HandleFileUploadDataRequest); + + case rfbFileDownloadCancel: + + return handleMessage(cl, "rfbFileDownloadCancelRequest", HandleFileDownloadCancelRequest); + + case rfbFileUploadFailed: + + return handleMessage(cl, "rfbFileUploadFailedRequest", HandleFileUploadFailedRequest); + + case rfbFileCreateDirRequest: + + return handleMessage(cl, "rfbFileCreateDirRequest", HandleFileCreateDirRequest); + + default: + + rfbLog("rfbProcessClientNormalMessage: unknown message type %d\n", + msg->type); + + /* + + We shouldn't close the connection here for unhandled msg, + it should be left to libvncserver. + rfbLog(" ... closing connection\n"); + rfbCloseClient(cl); + + */ + + return FALSE; + + } +} + + +void +rfbTightExtensionClientClose(rfbClientPtr cl, void* data) { + + if(data != NULL) + free(data); + +} + +void +rfbTightUsage(void) { + fprintf(stderr, "\nlibvncserver-tight-extension options:\n"); + fprintf(stderr, "-disablefiletransfer disable file transfer\n"); + fprintf(stderr, "-ftproot string set ftp root\n"); + fprintf(stderr,"\n"); +} + +int +rfbTightProcessArg(int argc, char *argv[]) { + + rfbLog("tightvnc-filetransfer/rfbTightProcessArg\n"); + + InitFileTransfer(); + + if(argc<1) + return 0; + + if (strcmp(argv[0], "-ftproot") == 0) { /* -ftproot string */ + if (2 > argc) { + return 0; + } + rfbLog("ftproot is set to <%s>\n", argv[1]); + if(SetFtpRoot(argv[1]) == FALSE) { + rfbLog("ERROR:: Path specified for ftproot in invalid\n"); + return 0; + } + return 2; + } else if (strcmp(argv[0], "-disablefiletransfer") == 0) { + EnableFileTransfer(FALSE); + return 1; + } + return 0; +} + +/* + * This method should be registered to libvncserver to handle rfbSecTypeTight security type. + */ +void +rfbHandleSecTypeTight(rfbClientPtr cl) { + + rfbTightClientPtr rtcp = (rfbTightClientPtr) malloc(sizeof(rfbTightClientRec)); + + rfbLog("tightvnc-filetransfer/rfbHandleSecTypeTight\n"); + + if(rtcp == NULL) { + /* Error condition close socket */ + rfbLog("Memory error has occured while handling " + "Tight security type... closing connection.\n"); + rfbCloseClient(cl); + return; + } + + memset(rtcp, 0, sizeof(rfbTightClientRec)); + rtcp->rcft.rcfd.downloadFD = -1; + rtcp->rcft.rcfu.uploadFD = -1; + rfbEnableExtension(cl, &tightVncFileTransferExtension, rtcp); + + rfbSendTunnelingCaps(cl); + +} + +rfbProtocolExtension tightVncFileTransferExtension = { + NULL, + rfbTightExtensionInit, + NULL, + NULL, + rfbTightExtensionMsgHandler, + rfbTightExtensionClientClose, + rfbTightUsage, + rfbTightProcessArg, + NULL +}; + +static rfbSecurityHandler tightVncSecurityHandler = { + rfbSecTypeTight, + rfbHandleSecTypeTight, + NULL +}; + +void rfbRegisterTightVNCFileTransferExtension() { + rfbRegisterProtocolExtension(&tightVncFileTransferExtension); + rfbRegisterSecurityHandler(&tightVncSecurityHandler); +} + +void +rfbUnregisterTightVNCFileTransferExtension() { + rfbUnregisterProtocolExtension(&tightVncFileTransferExtension); + rfbUnregisterSecurityHandler(&tightVncSecurityHandler); +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/translate.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/translate.c new file mode 100644 index 0000000..7c341c2 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/translate.c @@ -0,0 +1,477 @@ +/* + * translate.c - translate between different pixel formats + */ + +/* + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include + +static void PrintPixelFormat(rfbPixelFormat *pf); +static rfbBool rfbSetClientColourMapBGR233(rfbClientPtr cl); + +rfbBool rfbEconomicTranslate = FALSE; + +/* + * Some standard pixel formats. + */ + +static const rfbPixelFormat BGR233Format = { + 8, 8, 0, 1, 7, 7, 3, 0, 3, 6, 0, 0 +}; + + +/* + * Macro to compare pixel formats. + */ + +#define PF_EQ(x,y) \ + ((x.bitsPerPixel == y.bitsPerPixel) && \ + (x.depth == y.depth) && \ + ((x.bigEndian == y.bigEndian) || (x.bitsPerPixel == 8)) && \ + (x.trueColour == y.trueColour) && \ + (!x.trueColour || ((x.redMax == y.redMax) && \ + (x.greenMax == y.greenMax) && \ + (x.blueMax == y.blueMax) && \ + (x.redShift == y.redShift) && \ + (x.greenShift == y.greenShift) && \ + (x.blueShift == y.blueShift)))) + +#define CONCAT2(a,b) a##b +#define CONCAT2E(a,b) CONCAT2(a,b) +#define CONCAT3(a,b,c) a##b##c +#define CONCAT3E(a,b,c) CONCAT3(a,b,c) +#define CONCAT4(a,b,c,d) a##b##c##d +#define CONCAT4E(a,b,c,d) CONCAT4(a,b,c,d) + +#undef OUT +#undef IN + +#define OUT 8 +#include "tableinitcmtemplate.c" +#include "tableinittctemplate.c" +#define IN 8 +#include "tabletranstemplate.c" +#undef IN +#define IN 16 +#include "tabletranstemplate.c" +#undef IN +#define IN 32 +#include "tabletranstemplate.c" +#undef IN +#undef OUT + +#define OUT 16 +#include "tableinitcmtemplate.c" +#include "tableinittctemplate.c" +#define IN 8 +#include "tabletranstemplate.c" +#undef IN +#define IN 16 +#include "tabletranstemplate.c" +#undef IN +#define IN 32 +#include "tabletranstemplate.c" +#undef IN +#undef OUT + +#define OUT 32 +#include "tableinitcmtemplate.c" +#include "tableinittctemplate.c" +#define IN 8 +#include "tabletranstemplate.c" +#undef IN +#define IN 16 +#include "tabletranstemplate.c" +#undef IN +#define IN 32 +#include "tabletranstemplate.c" +#undef IN +#undef OUT + +#ifdef LIBVNCSERVER_ALLOW24BPP +#define COUNT_OFFSETS 4 +#define BPP2OFFSET(bpp) ((bpp)/8-1) +#include "tableinit24.c" +#define BPP 8 +#include "tabletrans24template.c" +#undef BPP +#define BPP 16 +#include "tabletrans24template.c" +#undef BPP +#define BPP 24 +#include "tabletrans24template.c" +#undef BPP +#define BPP 32 +#include "tabletrans24template.c" +#undef BPP +#else +#define COUNT_OFFSETS 3 +#define BPP2OFFSET(bpp) ((int)(bpp)/16) +#endif + +typedef void (*rfbInitCMTableFnType)(char **table, rfbPixelFormat *in, + rfbPixelFormat *out,rfbColourMap* cm); +typedef void (*rfbInitTableFnType)(char **table, rfbPixelFormat *in, + rfbPixelFormat *out); + +static rfbInitCMTableFnType rfbInitColourMapSingleTableFns[COUNT_OFFSETS] = { + rfbInitColourMapSingleTable8, + rfbInitColourMapSingleTable16, +#ifdef LIBVNCSERVER_ALLOW24BPP + rfbInitColourMapSingleTable24, +#endif + rfbInitColourMapSingleTable32 +}; + +static rfbInitTableFnType rfbInitTrueColourSingleTableFns[COUNT_OFFSETS] = { + rfbInitTrueColourSingleTable8, + rfbInitTrueColourSingleTable16, +#ifdef LIBVNCSERVER_ALLOW24BPP + rfbInitTrueColourSingleTable24, +#endif + rfbInitTrueColourSingleTable32 +}; + +static rfbInitTableFnType rfbInitTrueColourRGBTablesFns[COUNT_OFFSETS] = { + rfbInitTrueColourRGBTables8, + rfbInitTrueColourRGBTables16, +#ifdef LIBVNCSERVER_ALLOW24BPP + rfbInitTrueColourRGBTables24, +#endif + rfbInitTrueColourRGBTables32 +}; + +static rfbTranslateFnType rfbTranslateWithSingleTableFns[COUNT_OFFSETS][COUNT_OFFSETS] = { + { rfbTranslateWithSingleTable8to8, + rfbTranslateWithSingleTable8to16, +#ifdef LIBVNCSERVER_ALLOW24BPP + rfbTranslateWithSingleTable8to24, +#endif + rfbTranslateWithSingleTable8to32 }, + { rfbTranslateWithSingleTable16to8, + rfbTranslateWithSingleTable16to16, +#ifdef LIBVNCSERVER_ALLOW24BPP + rfbTranslateWithSingleTable16to24, +#endif + rfbTranslateWithSingleTable16to32 }, +#ifdef LIBVNCSERVER_ALLOW24BPP + { rfbTranslateWithSingleTable24to8, + rfbTranslateWithSingleTable24to16, + rfbTranslateWithSingleTable24to24, + rfbTranslateWithSingleTable24to32 }, +#endif + { rfbTranslateWithSingleTable32to8, + rfbTranslateWithSingleTable32to16, +#ifdef LIBVNCSERVER_ALLOW24BPP + rfbTranslateWithSingleTable32to24, +#endif + rfbTranslateWithSingleTable32to32 } +}; + +static rfbTranslateFnType rfbTranslateWithRGBTablesFns[COUNT_OFFSETS][COUNT_OFFSETS] = { + { rfbTranslateWithRGBTables8to8, + rfbTranslateWithRGBTables8to16, +#ifdef LIBVNCSERVER_ALLOW24BPP + rfbTranslateWithRGBTables8to24, +#endif + rfbTranslateWithRGBTables8to32 }, + { rfbTranslateWithRGBTables16to8, + rfbTranslateWithRGBTables16to16, +#ifdef LIBVNCSERVER_ALLOW24BPP + rfbTranslateWithRGBTables16to24, +#endif + rfbTranslateWithRGBTables16to32 }, +#ifdef LIBVNCSERVER_ALLOW24BPP + { rfbTranslateWithRGBTables24to8, + rfbTranslateWithRGBTables24to16, + rfbTranslateWithRGBTables24to24, + rfbTranslateWithRGBTables24to32 }, +#endif + { rfbTranslateWithRGBTables32to8, + rfbTranslateWithRGBTables32to16, +#ifdef LIBVNCSERVER_ALLOW24BPP + rfbTranslateWithRGBTables32to24, +#endif + rfbTranslateWithRGBTables32to32 } +}; + + + +/* + * rfbTranslateNone is used when no translation is required. + */ + +void +rfbTranslateNone(char *table, rfbPixelFormat *in, rfbPixelFormat *out, + char *iptr, char *optr, int bytesBetweenInputLines, + int width, int height) +{ + int bytesPerOutputLine = width * (out->bitsPerPixel / 8); + + while (height > 0) { + memcpy(optr, iptr, bytesPerOutputLine); + iptr += bytesBetweenInputLines; + optr += bytesPerOutputLine; + height--; + } +} + + +/* + * rfbSetTranslateFunction sets the translation function. + */ + +rfbBool +rfbSetTranslateFunction(rfbClientPtr cl) +{ + rfbLog("Pixel format for client %s:\n",cl->host); + PrintPixelFormat(&cl->format); + + /* + * Check that bits per pixel values are valid + */ + + if ((cl->screen->serverFormat.bitsPerPixel != 8) && + (cl->screen->serverFormat.bitsPerPixel != 16) && +#ifdef LIBVNCSERVER_ALLOW24BPP + (cl->screen->serverFormat.bitsPerPixel != 24) && +#endif + (cl->screen->serverFormat.bitsPerPixel != 32)) + { + rfbErr("%s: server bits per pixel not 8, 16 or 32 (is %d)\n", + "rfbSetTranslateFunction", + cl->screen->serverFormat.bitsPerPixel); + rfbCloseClient(cl); + return FALSE; + } + + if ((cl->format.bitsPerPixel != 8) && + (cl->format.bitsPerPixel != 16) && +#ifdef LIBVNCSERVER_ALLOW24BPP + (cl->format.bitsPerPixel != 24) && +#endif + (cl->format.bitsPerPixel != 32)) + { + rfbErr("%s: client bits per pixel not 8, 16 or 32\n", + "rfbSetTranslateFunction"); + rfbCloseClient(cl); + return FALSE; + } + + if (!cl->format.trueColour && (cl->format.bitsPerPixel != 8)) { + rfbErr("rfbSetTranslateFunction: client has colour map " + "but %d-bit - can only cope with 8-bit colour maps\n", + cl->format.bitsPerPixel); + rfbCloseClient(cl); + return FALSE; + } + + /* + * bpp is valid, now work out how to translate + */ + + if (!cl->format.trueColour) { + /* + * truecolour -> colour map + * + * Set client's colour map to BGR233, then effectively it's + * truecolour as well + */ + + if (!rfbSetClientColourMapBGR233(cl)) + return FALSE; + + cl->format = BGR233Format; + } + + /* truecolour -> truecolour */ + + if (PF_EQ(cl->format,cl->screen->serverFormat)) { + + /* client & server the same */ + + rfbLog("no translation needed\n"); + cl->translateFn = rfbTranslateNone; + return TRUE; + } + + if ((cl->screen->serverFormat.bitsPerPixel < 16) || + ((!cl->screen->serverFormat.trueColour || !rfbEconomicTranslate) && + (cl->screen->serverFormat.bitsPerPixel == 16))) { + + /* we can use a single lookup table for <= 16 bpp */ + + cl->translateFn = rfbTranslateWithSingleTableFns + [BPP2OFFSET(cl->screen->serverFormat.bitsPerPixel)] + [BPP2OFFSET(cl->format.bitsPerPixel)]; + + if(cl->screen->serverFormat.trueColour) + (*rfbInitTrueColourSingleTableFns + [BPP2OFFSET(cl->format.bitsPerPixel)]) (&cl->translateLookupTable, + &(cl->screen->serverFormat), &cl->format); + else + (*rfbInitColourMapSingleTableFns + [BPP2OFFSET(cl->format.bitsPerPixel)]) (&cl->translateLookupTable, + &(cl->screen->serverFormat), &cl->format,&cl->screen->colourMap); + + } else { + + /* otherwise we use three separate tables for red, green and blue */ + + cl->translateFn = rfbTranslateWithRGBTablesFns + [BPP2OFFSET(cl->screen->serverFormat.bitsPerPixel)] + [BPP2OFFSET(cl->format.bitsPerPixel)]; + + (*rfbInitTrueColourRGBTablesFns + [BPP2OFFSET(cl->format.bitsPerPixel)]) (&cl->translateLookupTable, + &(cl->screen->serverFormat), &cl->format); + } + + return TRUE; +} + + + +/* + * rfbSetClientColourMapBGR233 sets the client's colour map so that it's + * just like an 8-bit BGR233 true colour client. + */ + +static rfbBool +rfbSetClientColourMapBGR233(rfbClientPtr cl) +{ + char buf[sz_rfbSetColourMapEntriesMsg + 256 * 3 * 2]; + rfbSetColourMapEntriesMsg *scme = (rfbSetColourMapEntriesMsg *)buf; + uint16_t *rgb = (uint16_t *)(&buf[sz_rfbSetColourMapEntriesMsg]); + int i, len; + int r, g, b; + + if (cl->format.bitsPerPixel != 8 ) { + rfbErr("%s: client not 8 bits per pixel\n", + "rfbSetClientColourMapBGR233"); + rfbCloseClient(cl); + return FALSE; + } + + scme->type = rfbSetColourMapEntries; + + scme->firstColour = Swap16IfLE(0); + scme->nColours = Swap16IfLE(256); + + len = sz_rfbSetColourMapEntriesMsg; + + i = 0; + + for (b = 0; b < 4; b++) { + for (g = 0; g < 8; g++) { + for (r = 0; r < 8; r++) { + rgb[i++] = Swap16IfLE(r * 65535 / 7); + rgb[i++] = Swap16IfLE(g * 65535 / 7); + rgb[i++] = Swap16IfLE(b * 65535 / 3); + } + } + } + + len += 256 * 3 * 2; + + if (rfbWriteExact(cl, buf, len) < 0) { + rfbLogPerror("rfbSetClientColourMapBGR233: write"); + rfbCloseClient(cl); + return FALSE; + } + return TRUE; +} + +/* this function is not called very often, so it needn't be + efficient. */ + +/* + * rfbSetClientColourMap is called to set the client's colour map. If the + * client is a true colour client, we simply update our own translation table + * and mark the whole screen as having been modified. + */ + +rfbBool +rfbSetClientColourMap(rfbClientPtr cl, int firstColour, int nColours) +{ + if (cl->screen->serverFormat.trueColour || !cl->readyForSetColourMapEntries) { + return TRUE; + } + + if (nColours == 0) { + nColours = cl->screen->colourMap.count; + } + + if (cl->format.trueColour) { + LOCK(cl->updateMutex); + (*rfbInitColourMapSingleTableFns + [BPP2OFFSET(cl->format.bitsPerPixel)]) (&cl->translateLookupTable, + &cl->screen->serverFormat, &cl->format,&cl->screen->colourMap); + + sraRgnDestroy(cl->modifiedRegion); + cl->modifiedRegion = + sraRgnCreateRect(0,0,cl->screen->width,cl->screen->height); + UNLOCK(cl->updateMutex); + + return TRUE; + } + + return rfbSendSetColourMapEntries(cl, firstColour, nColours); +} + + +/* + * rfbSetClientColourMaps sets the colour map for each RFB client. + */ + +void +rfbSetClientColourMaps(rfbScreenInfoPtr rfbScreen, int firstColour, int nColours) +{ + rfbClientIteratorPtr i; + rfbClientPtr cl; + + i = rfbGetClientIterator(rfbScreen); + while((cl = rfbClientIteratorNext(i))) + rfbSetClientColourMap(cl, firstColour, nColours); + rfbReleaseClientIterator(i); +} + +static void +PrintPixelFormat(rfbPixelFormat *pf) +{ + if (pf->bitsPerPixel == 1) { + rfbLog(" 1 bpp, %s sig bit in each byte is leftmost on the screen.\n", + (pf->bigEndian ? "most" : "least")); + } else { + rfbLog(" %d bpp, depth %d%s\n",pf->bitsPerPixel,pf->depth, + ((pf->bitsPerPixel == 8) ? "" + : (pf->bigEndian ? ", big endian" : ", little endian"))); + if (pf->trueColour) { + rfbLog(" true colour: max r %d g %d b %d, shift r %d g %d b %d\n", + pf->redMax, pf->greenMax, pf->blueMax, + pf->redShift, pf->greenShift, pf->blueShift); + } else { + rfbLog(" uses a colour map (not true colour).\n"); + } + } +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/ultra.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/ultra.c new file mode 100644 index 0000000..9485591 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/ultra.c @@ -0,0 +1,231 @@ +/* + * ultra.c + * + * Routines to implement ultra based encoding (minilzo). + * ultrazip supports packed rectangles if the rects are tiny... + * This improves performance as lzo has more data to work with at once + * This is 'UltraZip' and is currently not implemented. + */ + +#include +#include "minilzo.h" + +/* + * cl->beforeEncBuf contains pixel data in the client's format. + * cl->afterEncBuf contains the lzo (deflated) encoding version. + * If the lzo compressed/encoded version is + * larger than the raw data or if it exceeds cl->afterEncBufSize then + * raw encoding is used instead. + */ + + +/* + * rfbSendOneRectEncodingZlib - send a given rectangle using one Zlib + * rectangle encoding. + */ + +#define MAX_WRKMEM ((LZO1X_1_MEM_COMPRESS) + (sizeof(lzo_align_t) - 1)) / sizeof(lzo_align_t) + + +void rfbFreeUltraData(rfbClientPtr cl) { + if (cl->compStreamInitedLZO) { + free(cl->lzoWrkMem); + cl->compStreamInitedLZO=FALSE; + } +} + + +static rfbBool +rfbSendOneRectEncodingUltra(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + rfbFramebufferUpdateRectHeader rect; + rfbZlibHeader hdr; + int deflateResult; + int i; + char *fbptr = (cl->scaledScreen->frameBuffer + (cl->scaledScreen->paddedWidthInBytes * y) + + (x * (cl->scaledScreen->bitsPerPixel / 8))); + + int maxRawSize; + lzo_uint maxCompSize; + + maxRawSize = (w * h * (cl->format.bitsPerPixel / 8)); + + if (cl->beforeEncBufSize < maxRawSize) { + cl->beforeEncBufSize = maxRawSize; + if (cl->beforeEncBuf == NULL) + cl->beforeEncBuf = (char *)malloc(cl->beforeEncBufSize); + else + cl->beforeEncBuf = (char *)realloc(cl->beforeEncBuf, cl->beforeEncBufSize); + } + + /* + * lzo requires output buffer to be slightly larger than the input + * buffer, in the worst case. + */ + maxCompSize = (maxRawSize + maxRawSize / 16 + 64 + 3); + + if (cl->afterEncBufSize < (int)maxCompSize) { + cl->afterEncBufSize = maxCompSize; + if (cl->afterEncBuf == NULL) + cl->afterEncBuf = (char *)malloc(cl->afterEncBufSize); + else + cl->afterEncBuf = (char *)realloc(cl->afterEncBuf, cl->afterEncBufSize); + } + + /* + * Convert pixel data to client format. + */ + (*cl->translateFn)(cl->translateLookupTable, &cl->screen->serverFormat, + &cl->format, fbptr, cl->beforeEncBuf, + cl->scaledScreen->paddedWidthInBytes, w, h); + + if ( cl->compStreamInitedLZO == FALSE ) { + cl->compStreamInitedLZO = TRUE; + /* Work-memory needed for compression. Allocate memory in units + * of `lzo_align_t' (instead of `char') to make sure it is properly aligned. + */ + cl->lzoWrkMem = malloc(sizeof(lzo_align_t) * (((LZO1X_1_MEM_COMPRESS) + (sizeof(lzo_align_t) - 1)) / sizeof(lzo_align_t))); + } + + /* Perform the compression here. */ + deflateResult = lzo1x_1_compress((unsigned char *)cl->beforeEncBuf, (lzo_uint)(w * h * (cl->format.bitsPerPixel / 8)), (unsigned char *)cl->afterEncBuf, &maxCompSize, cl->lzoWrkMem); + /* maxCompSize now contains the compressed size */ + + /* Find the total size of the resulting compressed data. */ + cl->afterEncBufLen = maxCompSize; + + if ( deflateResult != LZO_E_OK ) { + rfbErr("lzo deflation error: %d\n", deflateResult); + return FALSE; + } + + /* Update statics */ + rfbStatRecordEncodingSent(cl, rfbEncodingUltra, sz_rfbFramebufferUpdateRectHeader + sz_rfbZlibHeader + cl->afterEncBufLen, maxRawSize); + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader + sz_rfbZlibHeader + > UPDATE_BUF_SIZE) + { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.r.x = Swap16IfLE(x); + rect.r.y = Swap16IfLE(y); + rect.r.w = Swap16IfLE(w); + rect.r.h = Swap16IfLE(h); + rect.encoding = Swap32IfLE(rfbEncodingUltra); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + hdr.nBytes = Swap32IfLE(cl->afterEncBufLen); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&hdr, sz_rfbZlibHeader); + cl->ublen += sz_rfbZlibHeader; + + /* We might want to try sending the data directly... */ + for (i = 0; i < cl->afterEncBufLen;) { + + int bytesToCopy = UPDATE_BUF_SIZE - cl->ublen; + + if (i + bytesToCopy > cl->afterEncBufLen) { + bytesToCopy = cl->afterEncBufLen - i; + } + + memcpy(&cl->updateBuf[cl->ublen], &cl->afterEncBuf[i], bytesToCopy); + + cl->ublen += bytesToCopy; + i += bytesToCopy; + + if (cl->ublen == UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + } + + return TRUE; + +} + +/* + * rfbSendRectEncodingUltra - send a given rectangle using one or more + * LZO encoding rectangles. + */ + +rfbBool +rfbSendRectEncodingUltra(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + int maxLines; + int linesRemaining; + rfbRectangle partialRect; + + partialRect.x = x; + partialRect.y = y; + partialRect.w = w; + partialRect.h = h; + + /* Determine maximum pixel/scan lines allowed per rectangle. */ + maxLines = ( ULTRA_MAX_SIZE(w) / w ); + + /* Initialize number of scan lines left to do. */ + linesRemaining = h; + + /* Loop until all work is done. */ + while ( linesRemaining > 0 ) { + + int linesToComp; + + if ( maxLines < linesRemaining ) + linesToComp = maxLines; + else + linesToComp = linesRemaining; + + partialRect.h = linesToComp; + + /* Encode (compress) and send the next rectangle. */ + if ( ! rfbSendOneRectEncodingUltra( cl, + partialRect.x, + partialRect.y, + partialRect.w, + partialRect.h )) { + + return FALSE; + } + + /* Technically, flushing the buffer here is not extrememly + * efficient. However, this improves the overall throughput + * of the system over very slow networks. By flushing + * the buffer with every maximum size lzo rectangle, we + * improve the pipelining usage of the server CPU, network, + * and viewer CPU components. Insuring that these components + * are working in parallel actually improves the performance + * seen by the user. + * Since, lzo is most useful for slow networks, this flush + * is appropriate for the desired behavior of the lzo encoding. + */ + if (( cl->ublen > 0 ) && + ( linesToComp == maxLines )) { + if (!rfbSendUpdateBuf(cl)) { + + return FALSE; + } + } + + /* Update remaining and incremental rectangle location. */ + linesRemaining -= linesToComp; + partialRect.y += linesToComp; + + } + + return TRUE; + +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/websockets.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/websockets.c new file mode 100644 index 0000000..8cd96d3 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/websockets.c @@ -0,0 +1,892 @@ +/* + * websockets.c - deal with WebSockets clients. + * + * This code should be independent of any changes in the RFB protocol. It is + * an additional handshake and framing of normal sockets: + * http://www.whatwg.org/specs/web-socket-protocol/ + * + */ + +/* + * Copyright (C) 2010 Joel Martin + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include /* __b64_ntop */ +/* errno */ +#include + +#include +#include +#include "rfbconfig.h" +#include "rfbssl.h" +#include "rfbcrypto.h" + +#if defined(__BYTE_ORDER) && defined(__BIG_ENDIAN) && __BYTE_ORDER == __BIG_ENDIAN +#define WS_NTOH64(n) (n) +#define WS_NTOH32(n) (n) +#define WS_NTOH16(n) (n) +#define WS_HTON64(n) (n) +#define WS_HTON16(n) (n) +#else +#define WS_NTOH64(n) bswap_64(n) +#define WS_NTOH32(n) bswap_32(n) +#define WS_NTOH16(n) bswap_16(n) +#define WS_HTON64(n) bswap_64(n) +#define WS_HTON16(n) bswap_16(n) +#endif + +#define B64LEN(__x) (((__x + 2) / 3) * 12 / 3) +#define WSHLENMAX 14 /* 2 + sizeof(uint64_t) + sizeof(uint32_t) */ + +enum { + WEBSOCKETS_VERSION_HIXIE, + WEBSOCKETS_VERSION_HYBI +}; + +#if 0 +#include +static int gettid() { + return (int)syscall(SYS_gettid); +} +#endif + +typedef int (*wsEncodeFunc)(rfbClientPtr cl, const char *src, int len, char **dst); +typedef int (*wsDecodeFunc)(rfbClientPtr cl, char *dst, int len); + +typedef struct ws_ctx_s { + char codeBuf[B64LEN(UPDATE_BUF_SIZE) + WSHLENMAX]; /* base64 + maximum frame header length */ + char readbuf[8192]; + int readbufstart; + int readbuflen; + int dblen; + char carryBuf[3]; /* For base64 carry-over */ + int carrylen; + int version; + int base64; + wsEncodeFunc encode; + wsDecodeFunc decode; +} ws_ctx_t; + +typedef union ws_mask_s { + char c[4]; + uint32_t u; +} ws_mask_t; + +typedef struct __attribute__ ((__packed__)) ws_header_s { + unsigned char b0; + unsigned char b1; + union { + struct __attribute__ ((__packed__)) { + uint16_t l16; + ws_mask_t m16; + }; + struct __attribute__ ((__packed__)) { + uint64_t l64; + ws_mask_t m64; + }; + ws_mask_t m; + }; +} ws_header_t; + +enum +{ + WS_OPCODE_CONTINUATION = 0x0, + WS_OPCODE_TEXT_FRAME, + WS_OPCODE_BINARY_FRAME, + WS_OPCODE_CLOSE = 0x8, + WS_OPCODE_PING, + WS_OPCODE_PONG +}; + +#define FLASH_POLICY_RESPONSE "\n" +#define SZ_FLASH_POLICY_RESPONSE 93 + +/* + * draft-ietf-hybi-thewebsocketprotocol-10 + * 5.2.2. Sending the Server's Opening Handshake + */ +#define GUID "258EAFA5-E914-47DA-95CA-C5AB0DC85B11" + +#define SERVER_HANDSHAKE_HIXIE "HTTP/1.1 101 Web Socket Protocol Handshake\r\n\ +Upgrade: WebSocket\r\n\ +Connection: Upgrade\r\n\ +%sWebSocket-Origin: %s\r\n\ +%sWebSocket-Location: %s://%s%s\r\n\ +%sWebSocket-Protocol: %s\r\n\ +\r\n%s" + +#define SERVER_HANDSHAKE_HYBI "HTTP/1.1 101 Switching Protocols\r\n\ +Upgrade: websocket\r\n\ +Connection: Upgrade\r\n\ +Sec-WebSocket-Accept: %s\r\n\ +Sec-WebSocket-Protocol: %s\r\n\ +\r\n" + + +#define WEBSOCKETS_CLIENT_CONNECT_WAIT_MS 100 +#define WEBSOCKETS_CLIENT_SEND_WAIT_MS 100 +#define WEBSOCKETS_MAX_HANDSHAKE_LEN 4096 + +#if defined(__linux__) && defined(NEED_TIMEVAL) +struct timeval +{ + long int tv_sec,tv_usec; +} +; +#endif + +static rfbBool webSocketsHandshake(rfbClientPtr cl, char *scheme); +void webSocketsGenMd5(char * target, char *key1, char *key2, char *key3); + +static int webSocketsEncodeHybi(rfbClientPtr cl, const char *src, int len, char **dst); +static int webSocketsEncodeHixie(rfbClientPtr cl, const char *src, int len, char **dst); +static int webSocketsDecodeHybi(rfbClientPtr cl, char *dst, int len); +static int webSocketsDecodeHixie(rfbClientPtr cl, char *dst, int len); + +static int +min (int a, int b) { + return a < b ? a : b; +} + +static void webSocketsGenSha1Key(char *target, int size, char *key) +{ + struct iovec iov[2]; + unsigned char hash[20]; + + iov[0].iov_base = key; + iov[0].iov_len = strlen(key); + iov[1].iov_base = GUID; + iov[1].iov_len = sizeof(GUID) - 1; + digestsha1(iov, 2, hash); + if (-1 == __b64_ntop(hash, sizeof(hash), target, size)) + rfbErr("b64_ntop failed\n"); +} + +/* + * rfbWebSocketsHandshake is called to handle new WebSockets connections + */ + +rfbBool +webSocketsCheck (rfbClientPtr cl) +{ + char bbuf[4], *scheme; + int ret; + + ret = rfbPeekExactTimeout(cl, bbuf, 4, + WEBSOCKETS_CLIENT_CONNECT_WAIT_MS); + if ((ret < 0) && (errno == ETIMEDOUT)) { + rfbLog("Normal socket connection\n"); + return TRUE; + } else if (ret <= 0) { + rfbErr("webSocketsHandshake: unknown connection error\n"); + return FALSE; + } + + if (strncmp(bbuf, "<", 1) == 0) { + rfbLog("Got Flash policy request, sending response\n"); + if (rfbWriteExact(cl, FLASH_POLICY_RESPONSE, + SZ_FLASH_POLICY_RESPONSE) < 0) { + rfbErr("webSocketsHandshake: failed sending Flash policy response"); + } + return FALSE; + } else if (strncmp(bbuf, "\x16", 1) == 0 || strncmp(bbuf, "\x80", 1) == 0) { + rfbLog("Got TLS/SSL WebSockets connection\n"); + if (-1 == rfbssl_init(cl)) { + rfbErr("webSocketsHandshake: rfbssl_init failed\n"); + return FALSE; + } + ret = rfbPeekExactTimeout(cl, bbuf, 4, WEBSOCKETS_CLIENT_CONNECT_WAIT_MS); + scheme = "wss"; + } else { + scheme = "ws"; + } + + if (strncmp(bbuf, "GET ", 4) != 0) { + rfbErr("webSocketsHandshake: invalid client header\n"); + return FALSE; + } + + rfbLog("Got '%s' WebSockets handshake\n", scheme); + + if (!webSocketsHandshake(cl, scheme)) { + return FALSE; + } + /* Start WebSockets framing */ + return TRUE; +} + +static rfbBool +webSocketsHandshake(rfbClientPtr cl, char *scheme) +{ + char *buf, *response, *line; + int n, linestart = 0, len = 0, llen, base64 = TRUE; + char prefix[5], trailer[17]; + char *path = NULL, *host = NULL, *origin = NULL, *protocol = NULL; + char *key1 = NULL, *key2 = NULL, *key3 = NULL; + char *sec_ws_origin = NULL; + char *sec_ws_key = NULL; + char sec_ws_version = 0; + ws_ctx_t *wsctx = NULL; + + buf = (char *) malloc(WEBSOCKETS_MAX_HANDSHAKE_LEN); + if (!buf) { + rfbLogPerror("webSocketsHandshake: malloc"); + return FALSE; + } + response = (char *) malloc(WEBSOCKETS_MAX_HANDSHAKE_LEN); + if (!response) { + free(buf); + rfbLogPerror("webSocketsHandshake: malloc"); + return FALSE; + } + + while (len < WEBSOCKETS_MAX_HANDSHAKE_LEN-1) { + if ((n = rfbReadExactTimeout(cl, buf+len, 1, + WEBSOCKETS_CLIENT_SEND_WAIT_MS)) <= 0) { + if ((n < 0) && (errno == ETIMEDOUT)) { + break; + } + if (n == 0) + rfbLog("webSocketsHandshake: client gone\n"); + else + rfbLogPerror("webSocketsHandshake: read"); + free(response); + free(buf); + return FALSE; + } + + len += 1; + llen = len - linestart; + if (((llen >= 2)) && (buf[len-1] == '\n')) { + line = buf+linestart; + if ((llen == 2) && (strncmp("\r\n", line, 2) == 0)) { + if (key1 && key2) { + if ((n = rfbReadExact(cl, buf+len, 8)) <= 0) { + if ((n < 0) && (errno == ETIMEDOUT)) { + break; + } + if (n == 0) + rfbLog("webSocketsHandshake: client gone\n"); + else + rfbLogPerror("webSocketsHandshake: read"); + free(response); + free(buf); + return FALSE; + } + rfbLog("Got key3\n"); + key3 = buf+len; + len += 8; + } else { + buf[len] = '\0'; + } + break; + } else if ((llen >= 16) && ((strncmp("GET ", line, min(llen,4))) == 0)) { + /* 16 = 4 ("GET ") + 1 ("/.*") + 11 (" HTTP/1.1\r\n") */ + path = line+4; + buf[len-11] = '\0'; /* Trim trailing " HTTP/1.1\r\n" */ + cl->wspath = strdup(path); + /* rfbLog("Got path: %s\n", path); */ + } else if ((strncasecmp("host: ", line, min(llen,6))) == 0) { + host = line+6; + buf[len-2] = '\0'; + /* rfbLog("Got host: %s\n", host); */ + } else if ((strncasecmp("origin: ", line, min(llen,8))) == 0) { + origin = line+8; + buf[len-2] = '\0'; + /* rfbLog("Got origin: %s\n", origin); */ + } else if ((strncasecmp("sec-websocket-key1: ", line, min(llen,20))) == 0) { + key1 = line+20; + buf[len-2] = '\0'; + /* rfbLog("Got key1: %s\n", key1); */ + } else if ((strncasecmp("sec-websocket-key2: ", line, min(llen,20))) == 0) { + key2 = line+20; + buf[len-2] = '\0'; + /* rfbLog("Got key2: %s\n", key2); */ + /* HyBI */ + + } else if ((strncasecmp("sec-websocket-protocol: ", line, min(llen,24))) == 0) { + protocol = line+24; + buf[len-2] = '\0'; + rfbLog("Got protocol: %s\n", protocol); + } else if ((strncasecmp("sec-websocket-origin: ", line, min(llen,22))) == 0) { + sec_ws_origin = line+22; + buf[len-2] = '\0'; + } else if ((strncasecmp("sec-websocket-key: ", line, min(llen,19))) == 0) { + sec_ws_key = line+19; + buf[len-2] = '\0'; + } else if ((strncasecmp("sec-websocket-version: ", line, min(llen,23))) == 0) { + sec_ws_version = strtol(line+23, NULL, 10); + buf[len-2] = '\0'; + } + + linestart = len; + } + } + + if (!(path && host && (origin || sec_ws_origin))) { + rfbErr("webSocketsHandshake: incomplete client handshake\n"); + free(response); + free(buf); + return FALSE; + } + + if ((protocol) && (strstr(protocol, "binary"))) { + if (! sec_ws_version) { + rfbErr("webSocketsHandshake: 'binary' protocol not supported with Hixie\n"); + free(response); + free(buf); + return FALSE; + } + rfbLog(" - webSocketsHandshake: using binary/raw encoding\n"); + base64 = FALSE; + protocol = "binary"; + } else { + rfbLog(" - webSocketsHandshake: using base64 encoding\n"); + base64 = TRUE; + if ((protocol) && (strstr(protocol, "base64"))) { + protocol = "base64"; + } else { + protocol = ""; + } + } + + /* + * Generate the WebSockets server response based on the the headers sent + * by the client. + */ + + if (sec_ws_version) { + char accept[B64LEN(SHA1_HASH_SIZE) + 1]; + rfbLog(" - WebSockets client version hybi-%02d\n", sec_ws_version); + webSocketsGenSha1Key(accept, sizeof(accept), sec_ws_key); + len = snprintf(response, WEBSOCKETS_MAX_HANDSHAKE_LEN, + SERVER_HANDSHAKE_HYBI, accept, protocol); + } else { + /* older hixie handshake, this could be removed if + * a final standard is established */ + if (!(key1 && key2 && key3)) { + rfbLog(" - WebSockets client version hixie-75\n"); + prefix[0] = '\0'; + trailer[0] = '\0'; + } else { + rfbLog(" - WebSockets client version hixie-76\n"); + snprintf(prefix, 5, "Sec-"); + webSocketsGenMd5(trailer, key1, key2, key3); + } + len = snprintf(response, WEBSOCKETS_MAX_HANDSHAKE_LEN, + SERVER_HANDSHAKE_HIXIE, prefix, origin, prefix, scheme, + host, path, prefix, protocol, trailer); + } + + if (rfbWriteExact(cl, response, len) < 0) { + rfbErr("webSocketsHandshake: failed sending WebSockets response\n"); + free(response); + free(buf); + return FALSE; + } + /* rfbLog("webSocketsHandshake: %s\n", response); */ + free(response); + free(buf); + + + wsctx = calloc(1, sizeof(ws_ctx_t)); + if (sec_ws_version) { + wsctx->version = WEBSOCKETS_VERSION_HYBI; + wsctx->encode = webSocketsEncodeHybi; + wsctx->decode = webSocketsDecodeHybi; + } else { + wsctx->version = WEBSOCKETS_VERSION_HIXIE; + wsctx->encode = webSocketsEncodeHixie; + wsctx->decode = webSocketsDecodeHixie; + } + wsctx->base64 = base64; + cl->wsctx = (wsCtx *)wsctx; + return TRUE; +} + +void +webSocketsGenMd5(char * target, char *key1, char *key2, char *key3) +{ + unsigned int i, spaces1 = 0, spaces2 = 0; + unsigned long num1 = 0, num2 = 0; + unsigned char buf[17]; + struct iovec iov[1]; + + for (i=0; i < strlen(key1); i++) { + if (key1[i] == ' ') { + spaces1 += 1; + } + if ((key1[i] >= 48) && (key1[i] <= 57)) { + num1 = num1 * 10 + (key1[i] - 48); + } + } + num1 = num1 / spaces1; + + for (i=0; i < strlen(key2); i++) { + if (key2[i] == ' ') { + spaces2 += 1; + } + if ((key2[i] >= 48) && (key2[i] <= 57)) { + num2 = num2 * 10 + (key2[i] - 48); + } + } + num2 = num2 / spaces2; + + /* Pack it big-endian */ + buf[0] = (num1 & 0xff000000) >> 24; + buf[1] = (num1 & 0xff0000) >> 16; + buf[2] = (num1 & 0xff00) >> 8; + buf[3] = num1 & 0xff; + + buf[4] = (num2 & 0xff000000) >> 24; + buf[5] = (num2 & 0xff0000) >> 16; + buf[6] = (num2 & 0xff00) >> 8; + buf[7] = num2 & 0xff; + + strncpy((char *)buf+8, key3, 8); + buf[16] = '\0'; + + iov[0].iov_base = buf; + iov[0].iov_len = 16; + digestmd5(iov, 1, target); + target[16] = '\0'; + + return; +} + +static int +webSocketsEncodeHixie(rfbClientPtr cl, const char *src, int len, char **dst) +{ + int sz = 0; + ws_ctx_t *wsctx = (ws_ctx_t *)cl->wsctx; + + wsctx->codeBuf[sz++] = '\x00'; + len = __b64_ntop((unsigned char *)src, len, wsctx->codeBuf+sz, sizeof(wsctx->codeBuf) - (sz + 1)); + if (len < 0) { + return len; + } + sz += len; + + wsctx->codeBuf[sz++] = '\xff'; + *dst = wsctx->codeBuf; + return sz; +} + +static int +ws_read(rfbClientPtr cl, char *buf, int len) +{ + int n; + if (cl->sslctx) { + n = rfbssl_read(cl, buf, len); + } else { + n = read(cl->sock, buf, len); + } + return n; +} + +static int +ws_peek(rfbClientPtr cl, char *buf, int len) +{ + int n; + if (cl->sslctx) { + n = rfbssl_peek(cl, buf, len); + } else { + while (-1 == (n = recv(cl->sock, buf, len, MSG_PEEK))) { + if (errno != EAGAIN) + break; + } + } + return n; +} + +static int +webSocketsDecodeHixie(rfbClientPtr cl, char *dst, int len) +{ + int retlen = 0, n, i, avail, modlen, needlen; + char *buf, *end = NULL; + ws_ctx_t *wsctx = (ws_ctx_t *)cl->wsctx; + + buf = wsctx->codeBuf; + + n = ws_peek(cl, buf, len*2+2); + + if (n <= 0) { + /* save errno because rfbErr() will tamper it */ + int olderrno = errno; + rfbErr("%s: peek (%d) %m\n", __func__, errno); + errno = olderrno; + return n; + } + + + /* Base64 encoded WebSockets stream */ + + if (buf[0] == '\xff') { + i = ws_read(cl, buf, 1); /* Consume marker */ + buf++; + n--; + } + if (n == 0) { + errno = EAGAIN; + return -1; + } + if (buf[0] == '\x00') { + i = ws_read(cl, buf, 1); /* Consume marker */ + buf++; + n--; + } + if (n == 0) { + errno = EAGAIN; + return -1; + } + + /* end = memchr(buf, '\xff', len*2+2); */ + end = memchr(buf, '\xff', n); + if (!end) { + end = buf + n; + } + avail = end - buf; + + len -= wsctx->carrylen; + + /* Determine how much base64 data we need */ + modlen = len + (len+2)/3; + needlen = modlen; + if (needlen % 4) { + needlen += 4 - (needlen % 4); + } + + if (needlen > avail) { + /* rfbLog("Waiting for more base64 data\n"); */ + errno = EAGAIN; + return -1; + } + + /* Any carryover from previous decode */ + for (i=0; i < wsctx->carrylen; i++) { + /* rfbLog("Adding carryover %d\n", wsctx->carryBuf[i]); */ + dst[i] = wsctx->carryBuf[i]; + retlen += 1; + } + + /* Decode the rest of what we need */ + buf[needlen] = '\x00'; /* Replace end marker with end of string */ + /* rfbLog("buf: %s\n", buf); */ + n = __b64_pton(buf, (unsigned char *)dst+retlen, 2+len); + if (n < len) { + rfbErr("Base64 decode error\n"); + errno = EIO; + return -1; + } + retlen += n; + + /* Consume the data from socket */ + i = ws_read(cl, buf, needlen); + + wsctx->carrylen = n - len; + retlen -= wsctx->carrylen; + for (i=0; i < wsctx->carrylen; i++) { + /* rfbLog("Saving carryover %d\n", dst[retlen + i]); */ + wsctx->carryBuf[i] = dst[retlen + i]; + } + + /* rfbLog("<< webSocketsDecode, retlen: %d\n", retlen); */ + return retlen; +} + +static int +webSocketsDecodeHybi(rfbClientPtr cl, char *dst, int len) +{ + char *buf, *payload; + uint32_t *payload32; + int ret = -1, result = -1; + int total = 0; + ws_mask_t mask; + ws_header_t *header; + int i; + unsigned char opcode; + ws_ctx_t *wsctx = (ws_ctx_t *)cl->wsctx; + int flength, fhlen; + /* int fin; */ /* not used atm */ + + // rfbLog(" <== %s[%d]: %d cl: %p, wsctx: %p-%p (%d)\n", __func__, gettid(), len, cl, wsctx, (char *)wsctx + sizeof(ws_ctx_t), sizeof(ws_ctx_t)); + + if (wsctx->readbuflen) { + /* simply return what we have */ + if (wsctx->readbuflen > len) { + memcpy(dst, wsctx->readbuf + wsctx->readbufstart, len); + result = len; + wsctx->readbuflen -= len; + wsctx->readbufstart += len; + } else { + memcpy(dst, wsctx->readbuf + wsctx->readbufstart, wsctx->readbuflen); + result = wsctx->readbuflen; + wsctx->readbuflen = 0; + wsctx->readbufstart = 0; + } + goto spor; + } + + buf = wsctx->codeBuf; + header = (ws_header_t *)wsctx->codeBuf; + + ret = ws_peek(cl, buf, B64LEN(len) + WSHLENMAX); + + if (ret < 2) { + /* save errno because rfbErr() will tamper it */ + if (-1 == ret) { + int olderrno = errno; + rfbErr("%s: peek; %m\n", __func__); + errno = olderrno; + } else if (0 == ret) { + result = 0; + } else { + errno = EAGAIN; + } + goto spor; + } + + opcode = header->b0 & 0x0f; + /* fin = (header->b0 & 0x80) >> 7; */ /* not used atm */ + flength = header->b1 & 0x7f; + + /* + * 4.3. Client-to-Server Masking + * + * The client MUST mask all frames sent to the server. A server MUST + * close the connection upon receiving a frame with the MASK bit set to 0. + **/ + if (!(header->b1 & 0x80)) { + rfbErr("%s: got frame without mask\n", __func__, ret); + errno = EIO; + goto spor; + } + + if (flength < 126) { + fhlen = 2; + mask = header->m; + } else if (flength == 126 && 4 <= ret) { + flength = WS_NTOH16(header->l16); + fhlen = 4; + mask = header->m16; + } else if (flength == 127 && 10 <= ret) { + flength = WS_NTOH64(header->l64); + fhlen = 10; + mask = header->m64; + } else { + /* Incomplete frame header */ + rfbErr("%s: incomplete frame header\n", __func__, ret); + errno = EIO; + goto spor; + } + + /* absolute length of frame */ + total = fhlen + flength + 4; + payload = buf + fhlen + 4; /* header length + mask */ + + if (-1 == (ret = ws_read(cl, buf, total))) { + int olderrno = errno; + rfbErr("%s: read; %m", __func__); + errno = olderrno; + return ret; + } else if (ret < total) { + /* GT TODO: hmm? */ + rfbLog("%s: read; got partial data\n", __func__); + } else { + buf[ret] = '\0'; + } + + /* process 1 frame (32 bit op) */ + payload32 = (uint32_t *)payload; + for (i = 0; i < flength / 4; i++) { + payload32[i] ^= mask.u; + } + /* process the remaining bytes (if any) */ + for (i*=4; i < flength; i++) { + payload[i] ^= mask.c[i % 4]; + } + + switch (opcode) { + case WS_OPCODE_CLOSE: + rfbLog("got closure, reason %d\n", WS_NTOH16(((uint16_t *)payload)[0])); + errno = ECONNRESET; + break; + case WS_OPCODE_TEXT_FRAME: + if (-1 == (flength = __b64_pton(payload, (unsigned char *)wsctx->codeBuf, sizeof(wsctx->codeBuf)))) { + rfbErr("%s: Base64 decode error; %m\n", __func__); + break; + } + payload = wsctx->codeBuf; + /* fall through */ + case WS_OPCODE_BINARY_FRAME: + if (flength > len) { + memcpy(wsctx->readbuf, payload + len, flength - len); + wsctx->readbufstart = 0; + wsctx->readbuflen = flength - len; + flength = len; + } + memcpy(dst, payload, flength); + result = flength; + break; + default: + rfbErr("%s: unhandled opcode %d, b0: %02x, b1: %02x\n", __func__, (int)opcode, header->b0, header->b1); + } + + /* single point of return, if someone has questions :-) */ +spor: + /* rfbLog("%s: ret: %d/%d\n", __func__, result, len); */ + return result; +} + +static int +webSocketsEncodeHybi(rfbClientPtr cl, const char *src, int len, char **dst) +{ + int blen, ret = -1, sz = 0; + unsigned char opcode = '\0'; /* TODO: option! */ + ws_header_t *header; + ws_ctx_t *wsctx = (ws_ctx_t *)cl->wsctx; + + + /* Optional opcode: + * 0x0 - continuation + * 0x1 - text frame (base64 encode buf) + * 0x2 - binary frame (use raw buf) + * 0x8 - connection close + * 0x9 - ping + * 0xA - pong + **/ + if (!len) { + /* nothing to encode */ + return 0; + } + + header = (ws_header_t *)wsctx->codeBuf; + + if (wsctx->base64) { + opcode = WS_OPCODE_TEXT_FRAME; + /* calculate the resulting size */ + blen = B64LEN(len); + } else { + blen = len; + } + + header->b0 = 0x80 | (opcode & 0x0f); + if (blen <= 125) { + header->b1 = (uint8_t)blen; + sz = 2; + } else if (blen <= 65536) { + header->b1 = 0x7e; + header->l16 = WS_HTON16((uint16_t)blen); + sz = 4; + } else { + header->b1 = 0x7f; + header->l64 = WS_HTON64(blen); + sz = 10; + } + + if (wsctx->base64) { + if (-1 == (ret = __b64_ntop((unsigned char *)src, len, wsctx->codeBuf + sz, sizeof(wsctx->codeBuf) - sz))) { + rfbErr("%s: Base 64 encode failed\n", __func__); + } else { + if (ret != blen) + rfbErr("%s: Base 64 encode; something weird happened\n", __func__); + ret += sz; + } + } else { + memcpy(wsctx->codeBuf + sz, src, len); + ret = sz + len; + } + + *dst = wsctx->codeBuf; + return ret; +} + +int +webSocketsEncode(rfbClientPtr cl, const char *src, int len, char **dst) +{ + return ((ws_ctx_t *)cl->wsctx)->encode(cl, src, len, dst); +} + +int +webSocketsDecode(rfbClientPtr cl, char *dst, int len) +{ + return ((ws_ctx_t *)cl->wsctx)->decode(cl, dst, len); +} + + +/* returns TRUE if client sent a close frame or a single 'end of frame' + * marker was received, FALSE otherwise + * + * Note: This is a Hixie-only hack! + **/ +rfbBool +webSocketCheckDisconnect(rfbClientPtr cl) +{ + ws_ctx_t *wsctx = (ws_ctx_t *)cl->wsctx; + /* With Base64 encoding we need at least 4 bytes */ + char peekbuf[4]; + int n; + + if (wsctx->version == WEBSOCKETS_VERSION_HYBI) + return FALSE; + + if (cl->sslctx) + n = rfbssl_peek(cl, peekbuf, 4); + else + n = recv(cl->sock, peekbuf, 4, MSG_PEEK); + + if (n <= 0) { + if (n != 0) + rfbErr("%s: peek; %m", __func__); + rfbCloseClient(cl); + return TRUE; + } + + if (peekbuf[0] == '\xff') { + int doclose = 0; + /* Make sure we don't miss a client disconnect on an end frame + * marker. Because we use a peek buffer in some cases it is not + * applicable to wait for more data per select(). */ + switch (n) { + case 3: + if (peekbuf[1] == '\xff' && peekbuf[2] == '\x00') + doclose = 1; + break; + case 2: + if (peekbuf[1] == '\x00') + doclose = 1; + break; + default: + return FALSE; + } + + if (cl->sslctx) + n = rfbssl_read(cl, peekbuf, n); + else + n = read(cl->sock, peekbuf, n); + + if (doclose) { + rfbErr("%s: websocket close frame received\n", __func__); + rfbCloseClient(cl); + } + return TRUE; + } + return FALSE; +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/zlib.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zlib.c new file mode 100644 index 0000000..ac20c9c --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zlib.c @@ -0,0 +1,331 @@ +/* + * zlib.c + * + * Routines to implement zlib based encoding (deflate). + */ + +/* + * Copyright (C) 2000 Tridia Corporation. All Rights Reserved. + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + * + * For the latest source code, please check: + * + * http://www.developVNC.org/ + * + * or send email to feedback@developvnc.org. + */ + +#include + +/* + * zlibBeforeBuf contains pixel data in the client's format. + * zlibAfterBuf contains the zlib (deflated) encoding version. + * If the zlib compressed/encoded version is + * larger than the raw data or if it exceeds zlibAfterBufSize then + * raw encoding is used instead. + */ + +/* + * Out of lazyiness, we use thread local storage for zlib as we did for + * tight. N.B. ZRLE does it the traditional way with per-client storage + * (and so at least ZRLE will work threaded on older systems.) + */ +#if LIBVNCSERVER_HAVE_LIBPTHREAD && LIBVNCSERVER_HAVE_TLS && !defined(TLS) && defined(__linux__) +#define TLS __thread +#endif +#ifndef TLS +#define TLS +#endif + +static TLS int zlibBeforeBufSize = 0; +static TLS char *zlibBeforeBuf = NULL; + +static TLS int zlibAfterBufSize = 0; +static TLS char *zlibAfterBuf = NULL; +static TLS int zlibAfterBufLen = 0; + +void rfbZlibCleanup(rfbScreenInfoPtr screen) +{ + if (zlibBeforeBufSize) { + free(zlibBeforeBuf); + zlibBeforeBufSize=0; + } + if (zlibAfterBufSize) { + zlibAfterBufSize=0; + free(zlibAfterBuf); + } +} + + +/* + * rfbSendOneRectEncodingZlib - send a given rectangle using one Zlib + * rectangle encoding. + */ + +static rfbBool +rfbSendOneRectEncodingZlib(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + rfbFramebufferUpdateRectHeader rect; + rfbZlibHeader hdr; + int deflateResult; + int previousOut; + int i; + char *fbptr = (cl->scaledScreen->frameBuffer + (cl->scaledScreen->paddedWidthInBytes * y) + + (x * (cl->scaledScreen->bitsPerPixel / 8))); + + int maxRawSize; + int maxCompSize; + + maxRawSize = (cl->scaledScreen->width * cl->scaledScreen->height + * (cl->format.bitsPerPixel / 8)); + + if (zlibBeforeBufSize < maxRawSize) { + zlibBeforeBufSize = maxRawSize; + if (zlibBeforeBuf == NULL) + zlibBeforeBuf = (char *)malloc(zlibBeforeBufSize); + else + zlibBeforeBuf = (char *)realloc(zlibBeforeBuf, zlibBeforeBufSize); + } + + /* zlib compression is not useful for very small data sets. + * So, we just send these raw without any compression. + */ + if (( w * h * (cl->scaledScreen->bitsPerPixel / 8)) < + VNC_ENCODE_ZLIB_MIN_COMP_SIZE ) { + + int result; + + /* The translation function (used also by the in raw encoding) + * requires 4/2/1 byte alignment in the output buffer (which is + * updateBuf for the raw encoding) based on the bitsPerPixel of + * the viewer/client. This prevents SIGBUS errors on some + * architectures like SPARC, PARISC... + */ + if (( cl->format.bitsPerPixel > 8 ) && + ( cl->ublen % ( cl->format.bitsPerPixel / 8 )) != 0 ) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + result = rfbSendRectEncodingRaw(cl, x, y, w, h); + + return result; + + } + + /* + * zlib requires output buffer to be slightly larger than the input + * buffer, in the worst case. + */ + maxCompSize = maxRawSize + (( maxRawSize + 99 ) / 100 ) + 12; + + if (zlibAfterBufSize < maxCompSize) { + zlibAfterBufSize = maxCompSize; + if (zlibAfterBuf == NULL) + zlibAfterBuf = (char *)malloc(zlibAfterBufSize); + else + zlibAfterBuf = (char *)realloc(zlibAfterBuf, zlibAfterBufSize); + } + + + /* + * Convert pixel data to client format. + */ + (*cl->translateFn)(cl->translateLookupTable, &cl->screen->serverFormat, + &cl->format, fbptr, zlibBeforeBuf, + cl->scaledScreen->paddedWidthInBytes, w, h); + + cl->compStream.next_in = ( Bytef * )zlibBeforeBuf; + cl->compStream.avail_in = w * h * (cl->format.bitsPerPixel / 8); + cl->compStream.next_out = ( Bytef * )zlibAfterBuf; + cl->compStream.avail_out = maxCompSize; + cl->compStream.data_type = Z_BINARY; + + /* Initialize the deflation state. */ + if ( cl->compStreamInited == FALSE ) { + + cl->compStream.total_in = 0; + cl->compStream.total_out = 0; + cl->compStream.zalloc = Z_NULL; + cl->compStream.zfree = Z_NULL; + cl->compStream.opaque = Z_NULL; + + deflateInit2( &(cl->compStream), + cl->zlibCompressLevel, + Z_DEFLATED, + MAX_WBITS, + MAX_MEM_LEVEL, + Z_DEFAULT_STRATEGY ); + /* deflateInit( &(cl->compStream), Z_BEST_COMPRESSION ); */ + /* deflateInit( &(cl->compStream), Z_BEST_SPEED ); */ + cl->compStreamInited = TRUE; + + } + + previousOut = cl->compStream.total_out; + + /* Perform the compression here. */ + deflateResult = deflate( &(cl->compStream), Z_SYNC_FLUSH ); + + /* Find the total size of the resulting compressed data. */ + zlibAfterBufLen = cl->compStream.total_out - previousOut; + + if ( deflateResult != Z_OK ) { + rfbErr("zlib deflation error: %s\n", cl->compStream.msg); + return FALSE; + } + + /* Note that it is not possible to switch zlib parameters based on + * the results of the compression pass. The reason is + * that we rely on the compressor and decompressor states being + * in sync. Compressing and then discarding the results would + * cause lose of synchronization. + */ + + /* Update statics */ + rfbStatRecordEncodingSent(cl, rfbEncodingZlib, sz_rfbFramebufferUpdateRectHeader + sz_rfbZlibHeader + zlibAfterBufLen, + + w * (cl->format.bitsPerPixel / 8) * h); + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader + sz_rfbZlibHeader + > UPDATE_BUF_SIZE) + { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.r.x = Swap16IfLE(x); + rect.r.y = Swap16IfLE(y); + rect.r.w = Swap16IfLE(w); + rect.r.h = Swap16IfLE(h); + rect.encoding = Swap32IfLE(rfbEncodingZlib); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + hdr.nBytes = Swap32IfLE(zlibAfterBufLen); + + memcpy(&cl->updateBuf[cl->ublen], (char *)&hdr, sz_rfbZlibHeader); + cl->ublen += sz_rfbZlibHeader; + + for (i = 0; i < zlibAfterBufLen;) { + + int bytesToCopy = UPDATE_BUF_SIZE - cl->ublen; + + if (i + bytesToCopy > zlibAfterBufLen) { + bytesToCopy = zlibAfterBufLen - i; + } + + memcpy(&cl->updateBuf[cl->ublen], &zlibAfterBuf[i], bytesToCopy); + + cl->ublen += bytesToCopy; + i += bytesToCopy; + + if (cl->ublen == UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + } + + return TRUE; + +} + + +/* + * rfbSendRectEncodingZlib - send a given rectangle using one or more + * Zlib encoding rectangles. + */ + +rfbBool +rfbSendRectEncodingZlib(rfbClientPtr cl, + int x, + int y, + int w, + int h) +{ + int maxLines; + int linesRemaining; + rfbRectangle partialRect; + + partialRect.x = x; + partialRect.y = y; + partialRect.w = w; + partialRect.h = h; + + /* Determine maximum pixel/scan lines allowed per rectangle. */ + maxLines = ( ZLIB_MAX_SIZE(w) / w ); + + /* Initialize number of scan lines left to do. */ + linesRemaining = h; + + /* Loop until all work is done. */ + while ( linesRemaining > 0 ) { + + int linesToComp; + + if ( maxLines < linesRemaining ) + linesToComp = maxLines; + else + linesToComp = linesRemaining; + + partialRect.h = linesToComp; + + /* Encode (compress) and send the next rectangle. */ + if ( ! rfbSendOneRectEncodingZlib( cl, + partialRect.x, + partialRect.y, + partialRect.w, + partialRect.h )) { + + return FALSE; + } + + /* Technically, flushing the buffer here is not extrememly + * efficient. However, this improves the overall throughput + * of the system over very slow networks. By flushing + * the buffer with every maximum size zlib rectangle, we + * improve the pipelining usage of the server CPU, network, + * and viewer CPU components. Insuring that these components + * are working in parallel actually improves the performance + * seen by the user. + * Since, zlib is most useful for slow networks, this flush + * is appropriate for the desired behavior of the zlib encoding. + */ + if (( cl->ublen > 0 ) && + ( linesToComp == maxLines )) { + if (!rfbSendUpdateBuf(cl)) { + + return FALSE; + } + } + + /* Update remaining and incremental rectangle location. */ + linesRemaining -= linesToComp; + partialRect.y += linesToComp; + + } + + return TRUE; + +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrle.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrle.c new file mode 100644 index 0000000..80f629c --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrle.c @@ -0,0 +1,257 @@ +/* + * Copyright (C) 2002 RealVNC Ltd. All Rights Reserved. + * Copyright (C) 2003 Sun Microsystems, Inc. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * zrle.c + * + * Routines to implement Zlib Run-length Encoding (ZRLE). + */ + +#include "rfb/rfb.h" +#include "private.h" +#include "zrleoutstream.h" + + +#define GET_IMAGE_INTO_BUF(tx,ty,tw,th,buf) \ +{ char *fbptr = (cl->scaledScreen->frameBuffer \ + + (cl->scaledScreen->paddedWidthInBytes * ty) \ + + (tx * (cl->scaledScreen->bitsPerPixel / 8))); \ + \ + (*cl->translateFn)(cl->translateLookupTable, &cl->screen->serverFormat,\ + &cl->format, fbptr, (char*)buf, \ + cl->scaledScreen->paddedWidthInBytes, tw, th); } + +#define EXTRA_ARGS , rfbClientPtr cl + +#define ENDIAN_LITTLE 0 +#define ENDIAN_BIG 1 +#define ENDIAN_NO 2 +#define BPP 8 +#define ZYWRLE_ENDIAN ENDIAN_NO +#include +#undef BPP +#define BPP 15 +#undef ZYWRLE_ENDIAN +#define ZYWRLE_ENDIAN ENDIAN_LITTLE +#include +#undef ZYWRLE_ENDIAN +#define ZYWRLE_ENDIAN ENDIAN_BIG +#include +#undef BPP +#define BPP 16 +#undef ZYWRLE_ENDIAN +#define ZYWRLE_ENDIAN ENDIAN_LITTLE +#include +#undef ZYWRLE_ENDIAN +#define ZYWRLE_ENDIAN ENDIAN_BIG +#include +#undef BPP +#define BPP 32 +#undef ZYWRLE_ENDIAN +#define ZYWRLE_ENDIAN ENDIAN_LITTLE +#include +#undef ZYWRLE_ENDIAN +#define ZYWRLE_ENDIAN ENDIAN_BIG +#include +#define CPIXEL 24A +#undef ZYWRLE_ENDIAN +#define ZYWRLE_ENDIAN ENDIAN_LITTLE +#include +#undef ZYWRLE_ENDIAN +#define ZYWRLE_ENDIAN ENDIAN_BIG +#include +#undef CPIXEL +#define CPIXEL 24B +#undef ZYWRLE_ENDIAN +#define ZYWRLE_ENDIAN ENDIAN_LITTLE +#include +#undef ZYWRLE_ENDIAN +#define ZYWRLE_ENDIAN ENDIAN_BIG +#include +#undef CPIXEL +#undef BPP + + +/* + * zrleBeforeBuf contains pixel data in the client's format. It must be at + * least one pixel bigger than the largest tile of pixel data, since the + * ZRLE encoding algorithm writes to the position one past the end of the pixel + * data. + */ + + +/* + * rfbSendRectEncodingZRLE - send a given rectangle using ZRLE encoding. + */ + +rfbBool rfbSendRectEncodingZRLE(rfbClientPtr cl, int x, int y, int w, int h) +{ + zrleOutStream* zos; + rfbFramebufferUpdateRectHeader rect; + rfbZRLEHeader hdr; + int i; + char *zrleBeforeBuf; + + if (cl->zrleBeforeBuf == NULL) { + cl->zrleBeforeBuf = (char *) malloc(rfbZRLETileWidth * rfbZRLETileHeight * 4 + 4); + } + zrleBeforeBuf = cl->zrleBeforeBuf; + + if (cl->preferredEncoding == rfbEncodingZYWRLE) { + if (cl->tightQualityLevel < 0) { + cl->zywrleLevel = 1; + } else if (cl->tightQualityLevel < 3) { + cl->zywrleLevel = 3; + } else if (cl->tightQualityLevel < 6) { + cl->zywrleLevel = 2; + } else { + cl->zywrleLevel = 1; + } + } else + cl->zywrleLevel = 0; + + if (!cl->zrleData) + cl->zrleData = zrleOutStreamNew(); + zos = cl->zrleData; + zos->in.ptr = zos->in.start; + zos->out.ptr = zos->out.start; + + switch (cl->format.bitsPerPixel) { + + case 8: + zrleEncode8NE(x, y, w, h, zos, zrleBeforeBuf, cl); + break; + + case 16: + if (cl->format.greenMax > 0x1F) { + if (cl->format.bigEndian) + zrleEncode16BE(x, y, w, h, zos, zrleBeforeBuf, cl); + else + zrleEncode16LE(x, y, w, h, zos, zrleBeforeBuf, cl); + } else { + if (cl->format.bigEndian) + zrleEncode15BE(x, y, w, h, zos, zrleBeforeBuf, cl); + else + zrleEncode15LE(x, y, w, h, zos, zrleBeforeBuf, cl); + } + break; + + case 32: { + rfbBool fitsInLS3Bytes + = ((cl->format.redMax << cl->format.redShift) < (1<<24) && + (cl->format.greenMax << cl->format.greenShift) < (1<<24) && + (cl->format.blueMax << cl->format.blueShift) < (1<<24)); + + rfbBool fitsInMS3Bytes = (cl->format.redShift > 7 && + cl->format.greenShift > 7 && + cl->format.blueShift > 7); + + if ((fitsInLS3Bytes && !cl->format.bigEndian) || + (fitsInMS3Bytes && cl->format.bigEndian)) { + if (cl->format.bigEndian) + zrleEncode24ABE(x, y, w, h, zos, zrleBeforeBuf, cl); + else + zrleEncode24ALE(x, y, w, h, zos, zrleBeforeBuf, cl); + } + else if ((fitsInLS3Bytes && cl->format.bigEndian) || + (fitsInMS3Bytes && !cl->format.bigEndian)) { + if (cl->format.bigEndian) + zrleEncode24BBE(x, y, w, h, zos, zrleBeforeBuf, cl); + else + zrleEncode24BLE(x, y, w, h, zos, zrleBeforeBuf, cl); + } + else { + if (cl->format.bigEndian) + zrleEncode32BE(x, y, w, h, zos, zrleBeforeBuf, cl); + else + zrleEncode32LE(x, y, w, h, zos, zrleBeforeBuf, cl); + } + } + break; + } + + rfbStatRecordEncodingSent(cl, rfbEncodingZRLE, sz_rfbFramebufferUpdateRectHeader + sz_rfbZRLEHeader + ZRLE_BUFFER_LENGTH(&zos->out), + + w * (cl->format.bitsPerPixel / 8) * h); + + if (cl->ublen + sz_rfbFramebufferUpdateRectHeader + sz_rfbZRLEHeader + > UPDATE_BUF_SIZE) + { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + + rect.r.x = Swap16IfLE(x); + rect.r.y = Swap16IfLE(y); + rect.r.w = Swap16IfLE(w); + rect.r.h = Swap16IfLE(h); + rect.encoding = Swap32IfLE(cl->preferredEncoding); + + memcpy(cl->updateBuf+cl->ublen, (char *)&rect, + sz_rfbFramebufferUpdateRectHeader); + cl->ublen += sz_rfbFramebufferUpdateRectHeader; + + hdr.length = Swap32IfLE(ZRLE_BUFFER_LENGTH(&zos->out)); + + memcpy(cl->updateBuf+cl->ublen, (char *)&hdr, sz_rfbZRLEHeader); + cl->ublen += sz_rfbZRLEHeader; + + /* copy into updateBuf and send from there. Maybe should send directly? */ + + for (i = 0; i < ZRLE_BUFFER_LENGTH(&zos->out);) { + + int bytesToCopy = UPDATE_BUF_SIZE - cl->ublen; + + if (i + bytesToCopy > ZRLE_BUFFER_LENGTH(&zos->out)) { + bytesToCopy = ZRLE_BUFFER_LENGTH(&zos->out) - i; + } + + memcpy(cl->updateBuf+cl->ublen, (uint8_t*)zos->out.start + i, bytesToCopy); + + cl->ublen += bytesToCopy; + i += bytesToCopy; + + if (cl->ublen == UPDATE_BUF_SIZE) { + if (!rfbSendUpdateBuf(cl)) + return FALSE; + } + } + + return TRUE; +} + + +void rfbFreeZrleData(rfbClientPtr cl) +{ + if (cl->zrleData) { + zrleOutStreamFree(cl->zrleData); + } + cl->zrleData = NULL; + + if (cl->zrleBeforeBuf) { + free(cl->zrleBeforeBuf); + } + cl->zrleBeforeBuf = NULL; + + if (cl->paletteHelper) { + free(cl->paletteHelper); + } + cl->paletteHelper = NULL; +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrleencodetemplate.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrleencodetemplate.c new file mode 100644 index 0000000..b6de755 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrleencodetemplate.c @@ -0,0 +1,316 @@ +/* + * Copyright (C) 2002 RealVNC Ltd. All Rights Reserved. + * Copyright (C) 2003 Sun Microsystems, Inc. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * Before including this file, you must define a number of CPP macros. + * + * BPP should be 8, 16 or 32 depending on the bits per pixel. + * GET_IMAGE_INTO_BUF should be some code which gets a rectangle of pixel data + * into the given buffer. EXTRA_ARGS can be defined to pass any other + * arguments needed by GET_IMAGE_INTO_BUF. + * + * Note that the buf argument to ZRLE_ENCODE needs to be at least one pixel + * bigger than the largest tile of pixel data, since the ZRLE encoding + * algorithm writes to the position one past the end of the pixel data. + */ + +#include "zrleoutstream.h" +#include "zrlepalettehelper.h" +#include + +/* __RFB_CONCAT2 concatenates its two arguments. __RFB_CONCAT2E does the same + but also expands its arguments if they are macros */ + +#ifndef __RFB_CONCAT2E +#define __RFB_CONCAT2(a,b) a##b +#define __RFB_CONCAT2E(a,b) __RFB_CONCAT2(a,b) +#endif + +#ifndef __RFB_CONCAT3E +#define __RFB_CONCAT3(a,b,c) a##b##c +#define __RFB_CONCAT3E(a,b,c) __RFB_CONCAT3(a,b,c) +#endif + +#undef END_FIX +#if ZYWRLE_ENDIAN == ENDIAN_LITTLE +# define END_FIX LE +#elif ZYWRLE_ENDIAN == ENDIAN_BIG +# define END_FIX BE +#else +# define END_FIX NE +#endif + +#ifdef CPIXEL +#define PIXEL_T __RFB_CONCAT2E(zrle_U,BPP) +#define zrleOutStreamWRITE_PIXEL __RFB_CONCAT2E(zrleOutStreamWriteOpaque,CPIXEL) +#define ZRLE_ENCODE __RFB_CONCAT3E(zrleEncode,CPIXEL,END_FIX) +#define ZRLE_ENCODE_TILE __RFB_CONCAT3E(zrleEncodeTile,CPIXEL,END_FIX) +#define BPPOUT 24 +#elif BPP==15 +#define PIXEL_T __RFB_CONCAT2E(zrle_U,16) +#define zrleOutStreamWRITE_PIXEL __RFB_CONCAT2E(zrleOutStreamWriteOpaque,16) +#define ZRLE_ENCODE __RFB_CONCAT3E(zrleEncode,BPP,END_FIX) +#define ZRLE_ENCODE_TILE __RFB_CONCAT3E(zrleEncodeTile,BPP,END_FIX) +#define BPPOUT 16 +#else +#define PIXEL_T __RFB_CONCAT2E(zrle_U,BPP) +#define zrleOutStreamWRITE_PIXEL __RFB_CONCAT2E(zrleOutStreamWriteOpaque,BPP) +#define ZRLE_ENCODE __RFB_CONCAT3E(zrleEncode,BPP,END_FIX) +#define ZRLE_ENCODE_TILE __RFB_CONCAT3E(zrleEncodeTile,BPP,END_FIX) +#define BPPOUT BPP +#endif + +#ifndef ZRLE_ONCE +#define ZRLE_ONCE + +static const int bitsPerPackedPixel[] = { + 0, 1, 2, 2, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 +}; + +#endif /* ZRLE_ONCE */ + +void ZRLE_ENCODE_TILE (PIXEL_T* data, int w, int h, zrleOutStream* os, + int zywrle_level, int *zywrleBuf, void *paletteHelper); + +#if BPP!=8 +#define ZYWRLE_ENCODE +#include "zywrletemplate.c" +#endif + +static void ZRLE_ENCODE (int x, int y, int w, int h, + zrleOutStream* os, void* buf + EXTRA_ARGS + ) +{ + int ty; + for (ty = y; ty < y+h; ty += rfbZRLETileHeight) { + int tx, th = rfbZRLETileHeight; + if (th > y+h-ty) th = y+h-ty; + for (tx = x; tx < x+w; tx += rfbZRLETileWidth) { + int tw = rfbZRLETileWidth; + if (tw > x+w-tx) tw = x+w-tx; + + GET_IMAGE_INTO_BUF(tx,ty,tw,th,buf); + + if (cl->paletteHelper == NULL) { + cl->paletteHelper = (void *) calloc(sizeof(zrlePaletteHelper), 1); + } + + ZRLE_ENCODE_TILE((PIXEL_T*)buf, tw, th, os, + cl->zywrleLevel, cl->zywrleBuf, cl->paletteHelper); + } + } + zrleOutStreamFlush(os); +} + + +void ZRLE_ENCODE_TILE(PIXEL_T* data, int w, int h, zrleOutStream* os, + int zywrle_level, int *zywrleBuf, void *paletteHelper) +{ + /* First find the palette and the number of runs */ + + zrlePaletteHelper *ph; + + int runs = 0; + int singlePixels = 0; + + rfbBool useRle; + rfbBool usePalette; + + int estimatedBytes; + int plainRleBytes; + int i; + + PIXEL_T* ptr = data; + PIXEL_T* end = ptr + h * w; + *end = ~*(end-1); /* one past the end is different so the while loop ends */ + + ph = (zrlePaletteHelper *) paletteHelper; + zrlePaletteHelperInit(ph); + + while (ptr < end) { + PIXEL_T pix = *ptr; + if (*++ptr != pix) { + singlePixels++; + } else { + while (*++ptr == pix) ; + runs++; + } + zrlePaletteHelperInsert(ph, pix); + } + + /* Solid tile is a special case */ + + if (ph->size == 1) { + zrleOutStreamWriteU8(os, 1); + zrleOutStreamWRITE_PIXEL(os, ph->palette[0]); + return; + } + + /* Try to work out whether to use RLE and/or a palette. We do this by + estimating the number of bytes which will be generated and picking the + method which results in the fewest bytes. Of course this may not result + in the fewest bytes after compression... */ + + useRle = FALSE; + usePalette = FALSE; + + estimatedBytes = w * h * (BPPOUT/8); /* start assuming raw */ + +#if BPP!=8 + if (zywrle_level > 0 && !(zywrle_level & 0x80)) + estimatedBytes >>= zywrle_level; +#endif + + plainRleBytes = ((BPPOUT/8)+1) * (runs + singlePixels); + + if (plainRleBytes < estimatedBytes) { + useRle = TRUE; + estimatedBytes = plainRleBytes; + } + + if (ph->size < 128) { + int paletteRleBytes = (BPPOUT/8) * ph->size + 2 * runs + singlePixels; + + if (paletteRleBytes < estimatedBytes) { + useRle = TRUE; + usePalette = TRUE; + estimatedBytes = paletteRleBytes; + } + + if (ph->size < 17) { + int packedBytes = ((BPPOUT/8) * ph->size + + w * h * bitsPerPackedPixel[ph->size-1] / 8); + + if (packedBytes < estimatedBytes) { + useRle = FALSE; + usePalette = TRUE; + estimatedBytes = packedBytes; + } + } + } + + if (!usePalette) ph->size = 0; + + zrleOutStreamWriteU8(os, (useRle ? 128 : 0) | ph->size); + + for (i = 0; i < ph->size; i++) { + zrleOutStreamWRITE_PIXEL(os, ph->palette[i]); + } + + if (useRle) { + + PIXEL_T* ptr = data; + PIXEL_T* end = ptr + w * h; + PIXEL_T* runStart; + PIXEL_T pix; + while (ptr < end) { + int len; + runStart = ptr; + pix = *ptr++; + while (*ptr == pix && ptr < end) + ptr++; + len = ptr - runStart; + if (len <= 2 && usePalette) { + int index = zrlePaletteHelperLookup(ph, pix); + if (len == 2) + zrleOutStreamWriteU8(os, index); + zrleOutStreamWriteU8(os, index); + continue; + } + if (usePalette) { + int index = zrlePaletteHelperLookup(ph, pix); + zrleOutStreamWriteU8(os, index | 128); + } else { + zrleOutStreamWRITE_PIXEL(os, pix); + } + len -= 1; + while (len >= 255) { + zrleOutStreamWriteU8(os, 255); + len -= 255; + } + zrleOutStreamWriteU8(os, len); + } + + } else { + + /* no RLE */ + + if (usePalette) { + int bppp; + PIXEL_T* ptr = data; + + /* packed pixels */ + + assert (ph->size < 17); + + bppp = bitsPerPackedPixel[ph->size-1]; + + for (i = 0; i < h; i++) { + zrle_U8 nbits = 0; + zrle_U8 byte = 0; + + PIXEL_T* eol = ptr + w; + + while (ptr < eol) { + PIXEL_T pix = *ptr++; + zrle_U8 index = zrlePaletteHelperLookup(ph, pix); + byte = (byte << bppp) | index; + nbits += bppp; + if (nbits >= 8) { + zrleOutStreamWriteU8(os, byte); + nbits = 0; + } + } + if (nbits > 0) { + byte <<= 8 - nbits; + zrleOutStreamWriteU8(os, byte); + } + } + } else { + + /* raw */ + +#if BPP!=8 + if (zywrle_level > 0 && !(zywrle_level & 0x80)) { + ZYWRLE_ANALYZE(data, data, w, h, w, zywrle_level, zywrleBuf); + ZRLE_ENCODE_TILE(data, w, h, os, zywrle_level | 0x80, zywrleBuf, paletteHelper); + } + else +#endif + { +#ifdef CPIXEL + PIXEL_T *ptr; + for (ptr = data; ptr < data+w*h; ptr++) + zrleOutStreamWRITE_PIXEL(os, *ptr); +#else + zrleOutStreamWriteBytes(os, (zrle_U8 *)data, w*h*(BPP/8)); +#endif + } + } + } +} + +#undef PIXEL_T +#undef zrleOutStreamWRITE_PIXEL +#undef ZRLE_ENCODE +#undef ZRLE_ENCODE_TILE +#undef ZYWRLE_ENCODE_TILE +#undef BPPOUT diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrleoutstream.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrleoutstream.c new file mode 100644 index 0000000..4efe609 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrleoutstream.c @@ -0,0 +1,275 @@ +/* + * Copyright (C) 2002 RealVNC Ltd. All Rights Reserved. + * Copyright (C) 2003 Sun Microsystems, Inc. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include "zrleoutstream.h" +#include + +#define ZRLE_IN_BUFFER_SIZE 16384 +#define ZRLE_OUT_BUFFER_SIZE 1024 +#undef ZRLE_DEBUG + +static rfbBool zrleBufferAlloc(zrleBuffer *buffer, int size) +{ + buffer->ptr = buffer->start = malloc(size); + if (buffer->start == NULL) { + buffer->end = NULL; + return FALSE; + } + + buffer->end = buffer->start + size; + + return TRUE; +} + +static void zrleBufferFree(zrleBuffer *buffer) +{ + if (buffer->start) + free(buffer->start); + buffer->start = buffer->ptr = buffer->end = NULL; +} + +static rfbBool zrleBufferGrow(zrleBuffer *buffer, int size) +{ + int offset; + + size += buffer->end - buffer->start; + offset = ZRLE_BUFFER_LENGTH (buffer); + + buffer->start = realloc(buffer->start, size); + if (!buffer->start) { + return FALSE; + } + + buffer->end = buffer->start + size; + buffer->ptr = buffer->start + offset; + + return TRUE; +} + +zrleOutStream *zrleOutStreamNew(void) +{ + zrleOutStream *os; + + os = malloc(sizeof(zrleOutStream)); + if (os == NULL) + return NULL; + + if (!zrleBufferAlloc(&os->in, ZRLE_IN_BUFFER_SIZE)) { + free(os); + return NULL; + } + + if (!zrleBufferAlloc(&os->out, ZRLE_OUT_BUFFER_SIZE)) { + zrleBufferFree(&os->in); + free(os); + return NULL; + } + + os->zs.zalloc = Z_NULL; + os->zs.zfree = Z_NULL; + os->zs.opaque = Z_NULL; + if (deflateInit(&os->zs, Z_DEFAULT_COMPRESSION) != Z_OK) { + zrleBufferFree(&os->in); + free(os); + return NULL; + } + + return os; +} + +void zrleOutStreamFree (zrleOutStream *os) +{ + deflateEnd(&os->zs); + zrleBufferFree(&os->in); + zrleBufferFree(&os->out); + free(os); +} + +rfbBool zrleOutStreamFlush(zrleOutStream *os) +{ + os->zs.next_in = os->in.start; + os->zs.avail_in = ZRLE_BUFFER_LENGTH (&os->in); + +#ifdef ZRLE_DEBUG + rfbLog("zrleOutStreamFlush: avail_in %d\n", os->zs.avail_in); +#endif + + while (os->zs.avail_in != 0) { + do { + int ret; + + if (os->out.ptr >= os->out.end && + !zrleBufferGrow(&os->out, os->out.end - os->out.start)) { + rfbLog("zrleOutStreamFlush: failed to grow output buffer\n"); + return FALSE; + } + + os->zs.next_out = os->out.ptr; + os->zs.avail_out = os->out.end - os->out.ptr; + +#ifdef ZRLE_DEBUG + rfbLog("zrleOutStreamFlush: calling deflate, avail_in %d, avail_out %d\n", + os->zs.avail_in, os->zs.avail_out); +#endif + + if ((ret = deflate(&os->zs, Z_SYNC_FLUSH)) != Z_OK) { + rfbLog("zrleOutStreamFlush: deflate failed with error code %d\n", ret); + return FALSE; + } + +#ifdef ZRLE_DEBUG + rfbLog("zrleOutStreamFlush: after deflate: %d bytes\n", + os->zs.next_out - os->out.ptr); +#endif + + os->out.ptr = os->zs.next_out; + } while (os->zs.avail_out == 0); + } + + os->in.ptr = os->in.start; + + return TRUE; +} + +static int zrleOutStreamOverrun(zrleOutStream *os, + int size) +{ +#ifdef ZRLE_DEBUG + rfbLog("zrleOutStreamOverrun\n"); +#endif + + while (os->in.end - os->in.ptr < size && os->in.ptr > os->in.start) { + os->zs.next_in = os->in.start; + os->zs.avail_in = ZRLE_BUFFER_LENGTH (&os->in); + + do { + int ret; + + if (os->out.ptr >= os->out.end && + !zrleBufferGrow(&os->out, os->out.end - os->out.start)) { + rfbLog("zrleOutStreamOverrun: failed to grow output buffer\n"); + return FALSE; + } + + os->zs.next_out = os->out.ptr; + os->zs.avail_out = os->out.end - os->out.ptr; + +#ifdef ZRLE_DEBUG + rfbLog("zrleOutStreamOverrun: calling deflate, avail_in %d, avail_out %d\n", + os->zs.avail_in, os->zs.avail_out); +#endif + + if ((ret = deflate(&os->zs, 0)) != Z_OK) { + rfbLog("zrleOutStreamOverrun: deflate failed with error code %d\n", ret); + return 0; + } + +#ifdef ZRLE_DEBUG + rfbLog("zrleOutStreamOverrun: after deflate: %d bytes\n", + os->zs.next_out - os->out.ptr); +#endif + + os->out.ptr = os->zs.next_out; + } while (os->zs.avail_out == 0); + + /* output buffer not full */ + + if (os->zs.avail_in == 0) { + os->in.ptr = os->in.start; + } else { + /* but didn't consume all the data? try shifting what's left to the + * start of the buffer. + */ + rfbLog("zrleOutStreamOverrun: out buf not full, but in data not consumed\n"); + memmove(os->in.start, os->zs.next_in, os->in.ptr - os->zs.next_in); + os->in.ptr -= os->zs.next_in - os->in.start; + } + } + + if (size > os->in.end - os->in.ptr) + size = os->in.end - os->in.ptr; + + return size; +} + +static int zrleOutStreamCheck(zrleOutStream *os, int size) +{ + if (os->in.ptr + size > os->in.end) { + return zrleOutStreamOverrun(os, size); + } + return size; +} + +void zrleOutStreamWriteBytes(zrleOutStream *os, + const zrle_U8 *data, + int length) +{ + const zrle_U8* dataEnd = data + length; + while (data < dataEnd) { + int n = zrleOutStreamCheck(os, dataEnd - data); + memcpy(os->in.ptr, data, n); + os->in.ptr += n; + data += n; + } +} + +void zrleOutStreamWriteU8(zrleOutStream *os, zrle_U8 u) +{ + zrleOutStreamCheck(os, 1); + *os->in.ptr++ = u; +} + +void zrleOutStreamWriteOpaque8(zrleOutStream *os, zrle_U8 u) +{ + zrleOutStreamCheck(os, 1); + *os->in.ptr++ = u; +} + +void zrleOutStreamWriteOpaque16 (zrleOutStream *os, zrle_U16 u) +{ + zrleOutStreamCheck(os, 2); + *os->in.ptr++ = ((zrle_U8*)&u)[0]; + *os->in.ptr++ = ((zrle_U8*)&u)[1]; +} + +void zrleOutStreamWriteOpaque32 (zrleOutStream *os, zrle_U32 u) +{ + zrleOutStreamCheck(os, 4); + *os->in.ptr++ = ((zrle_U8*)&u)[0]; + *os->in.ptr++ = ((zrle_U8*)&u)[1]; + *os->in.ptr++ = ((zrle_U8*)&u)[2]; + *os->in.ptr++ = ((zrle_U8*)&u)[3]; +} + +void zrleOutStreamWriteOpaque24A(zrleOutStream *os, zrle_U32 u) +{ + zrleOutStreamCheck(os, 3); + *os->in.ptr++ = ((zrle_U8*)&u)[0]; + *os->in.ptr++ = ((zrle_U8*)&u)[1]; + *os->in.ptr++ = ((zrle_U8*)&u)[2]; +} + +void zrleOutStreamWriteOpaque24B(zrleOutStream *os, zrle_U32 u) +{ + zrleOutStreamCheck(os, 3); + *os->in.ptr++ = ((zrle_U8*)&u)[1]; + *os->in.ptr++ = ((zrle_U8*)&u)[2]; + *os->in.ptr++ = ((zrle_U8*)&u)[3]; +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrleoutstream.h b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrleoutstream.h new file mode 100644 index 0000000..9e4fe51 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrleoutstream.h @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2002 RealVNC Ltd. All Rights Reserved. + * Copyright (C) 2003 Sun Microsystems, Inc. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#ifndef __ZRLE_OUT_STREAM_H__ +#define __ZRLE_OUT_STREAM_H__ + +#include +#include "zrletypes.h" +#include "rfb/rfb.h" + +typedef struct { + zrle_U8 *start; + zrle_U8 *ptr; + zrle_U8 *end; +} zrleBuffer; + +typedef struct { + zrleBuffer in; + zrleBuffer out; + + z_stream zs; +} zrleOutStream; + +#define ZRLE_BUFFER_LENGTH(b) ((b)->ptr - (b)->start) + +zrleOutStream *zrleOutStreamNew (void); +void zrleOutStreamFree (zrleOutStream *os); +rfbBool zrleOutStreamFlush (zrleOutStream *os); +void zrleOutStreamWriteBytes (zrleOutStream *os, + const zrle_U8 *data, + int length); +void zrleOutStreamWriteU8 (zrleOutStream *os, + zrle_U8 u); +void zrleOutStreamWriteOpaque8 (zrleOutStream *os, + zrle_U8 u); +void zrleOutStreamWriteOpaque16 (zrleOutStream *os, + zrle_U16 u); +void zrleOutStreamWriteOpaque32 (zrleOutStream *os, + zrle_U32 u); +void zrleOutStreamWriteOpaque24A(zrleOutStream *os, + zrle_U32 u); +void zrleOutStreamWriteOpaque24B(zrleOutStream *os, + zrle_U32 u); + +#endif /* __ZRLE_OUT_STREAM_H__ */ diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrlepalettehelper.c b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrlepalettehelper.c new file mode 100644 index 0000000..d758a26 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrlepalettehelper.c @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2002 RealVNC Ltd. All Rights Reserved. + * Copyright (C) 2003 Sun Microsystems, Inc. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include "zrlepalettehelper.h" +#include +#include + +#define ZRLE_HASH(pix) (((pix) ^ ((pix) >> 17)) & 4095) + +void zrlePaletteHelperInit(zrlePaletteHelper *helper) +{ + memset(helper->palette, 0, sizeof(helper->palette)); + memset(helper->index, 255, sizeof(helper->index)); + memset(helper->key, 0, sizeof(helper->key)); + helper->size = 0; +} + +void zrlePaletteHelperInsert(zrlePaletteHelper *helper, zrle_U32 pix) +{ + if (helper->size < ZRLE_PALETTE_MAX_SIZE) { + int i = ZRLE_HASH(pix); + + while (helper->index[i] != 255 && helper->key[i] != pix) + i++; + if (helper->index[i] != 255) return; + + helper->index[i] = helper->size; + helper->key[i] = pix; + helper->palette[helper->size] = pix; + } + helper->size++; +} + +int zrlePaletteHelperLookup(zrlePaletteHelper *helper, zrle_U32 pix) +{ + int i = ZRLE_HASH(pix); + + assert(helper->size <= ZRLE_PALETTE_MAX_SIZE); + + while (helper->index[i] != 255 && helper->key[i] != pix) + i++; + if (helper->index[i] != 255) return helper->index[i]; + + return -1; +} diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrlepalettehelper.h b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrlepalettehelper.h new file mode 100644 index 0000000..e1213d1 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrlepalettehelper.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2002 RealVNC Ltd. All Rights Reserved. + * Copyright (C) 2003 Sun Microsystems, Inc. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * The PaletteHelper class helps us build up the palette from pixel data by + * storing a reverse index using a simple hash-table + */ + +#ifndef __ZRLE_PALETTE_HELPER_H__ +#define __ZRLE_PALETTE_HELPER_H__ + +#include "zrletypes.h" + +#define ZRLE_PALETTE_MAX_SIZE 127 + +typedef struct { + zrle_U32 palette[ZRLE_PALETTE_MAX_SIZE]; + zrle_U8 index[ZRLE_PALETTE_MAX_SIZE + 4096]; + zrle_U32 key[ZRLE_PALETTE_MAX_SIZE + 4096]; + int size; +} zrlePaletteHelper; + +void zrlePaletteHelperInit (zrlePaletteHelper *helper); +void zrlePaletteHelperInsert(zrlePaletteHelper *helper, + zrle_U32 pix); +int zrlePaletteHelperLookup(zrlePaletteHelper *helper, + zrle_U32 pix); + +#endif /* __ZRLE_PALETTE_HELPER_H__ */ diff --git a/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrletypes.h b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrletypes.h new file mode 100644 index 0000000..0df42c9 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/libvncserver/zrletypes.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2002 RealVNC Ltd. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#ifndef __ZRLE_TYPES_H__ +#define __ZRLE_TYPES_H__ + +typedef unsigned char zrle_U8; +typedef unsigned short zrle_U16; +typedef unsigned int zrle_U32; +typedef signed char zrle_S8; +typedef signed short zrle_S16; +typedef signed int zrle_S32; + +#endif /* __ZRLE_TYPES_H__ */ diff --git a/jni/vnc/LibVNCServer-0.9.9/ltmain.sh b/jni/vnc/LibVNCServer-0.9.9/ltmain.sh new file mode 100644 index 0000000..06823e0 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/ltmain.sh @@ -0,0 +1,6863 @@ +# ltmain.sh - Provide generalized library-building support services. +# NOTE: Changing this file will not affect anything until you rerun configure. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +basename="s,^.*/,,g" + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# The name of this program: +progname=`echo "$progpath" | $SED $basename` +modename="$progname" + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=1.5.22 +TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes. +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +# Check that we have a working $echo. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE +fi + +# Global variables. +mode=$default_mode +nonopt= +prev= +prevopt= +run= +show="$echo" +show_help= +execute_dlfiles= +duplicate_deps=no +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" + +##################################### +# Shell function definitions: +# This seems to be the best place for them + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $mkdir "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || { + $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 + exit $EXIT_FAILURE + } + fi + + $echo "X$my_tmpdir" | $Xsed +} + + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () +{ + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ + $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | \ + $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $echo $win32_libid_type +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case "$@ " in + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit $EXIT_FAILURE +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + + $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" + $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 + exit $EXIT_FAILURE + fi +} + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + my_status="" + + $show "${rm}r $my_gentop" + $run ${rm}r "$my_gentop" + $show "$mkdir $my_gentop" + $run $mkdir "$my_gentop" + my_status=$? + if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then + exit $my_status + fi + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` + my_xdir="$my_gentop/$my_xlib" + + $show "${rm}r $my_xdir" + $run ${rm}r "$my_xdir" + $show "$mkdir $my_xdir" + $run $mkdir "$my_xdir" + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then + exit $exit_status + fi + case $host in + *-darwin*) + $show "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + if test -z "$run"; then + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` + darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` + if test -n "$darwin_arches"; then + darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + $show "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we have a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + lipo -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + ${rm}r unfat-$$ + cd "$darwin_orig_dir" + else + cd "$darwin_orig_dir" + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + fi # $run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + func_extract_archives_result="$my_oldobjs" +} +# End of Shell function definitions +##################################### + +# Darwin sucks +eval std_shrext=\"$shrext_cmds\" + +disable_libs=no + +# Parse our command line options once, thoroughly. +while test "$#" -gt 0 +do + arg="$1" + shift + + case $arg in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + execute_dlfiles) + execute_dlfiles="$execute_dlfiles $arg" + ;; + tag) + tagname="$arg" + preserve_args="${preserve_args}=$arg" + + # Check whether tagname contains only valid characters + case $tagname in + *[!-_A-Za-z0-9,/]*) + $echo "$progname: invalid tag name: $tagname" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $tagname in + CC) + # Don't test for the "default" C tag, as we know, it's there, but + # not specially marked. + ;; + *) + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then + taglist="$taglist $tagname" + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" + else + $echo "$progname: ignoring unknown tag $tagname" 1>&2 + fi + ;; + esac + ;; + *) + eval "$prev=\$arg" + ;; + esac + + prev= + prevopt= + continue + fi + + # Have we seen a non-optional argument yet? + case $arg in + --help) + show_help=yes + ;; + + --version) + $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + $echo + $echo "Copyright (C) 2005 Free Software Foundation, Inc." + $echo "This is free software; see the source for copying conditions. There is NO" + $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + exit $? + ;; + + --config) + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath + # Now print the configurations for the tags. + for tagname in $taglist; do + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" + done + exit $? + ;; + + --debug) + $echo "$progname: enabling shell trace mode" + set -x + preserve_args="$preserve_args $arg" + ;; + + --dry-run | -n) + run=: + ;; + + --features) + $echo "host: $host" + if test "$build_libtool_libs" = yes; then + $echo "enable shared libraries" + else + $echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + $echo "enable static libraries" + else + $echo "disable static libraries" + fi + exit $? + ;; + + --finish) mode="finish" ;; + + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + + --preserve-dup-deps) duplicate_deps="yes" ;; + + --quiet | --silent) + show=: + preserve_args="$preserve_args $arg" + ;; + + --tag) + prevopt="--tag" + prev=tag + preserve_args="$preserve_args --tag" + ;; + --tag=*) + set tag "$optarg" ${1+"$@"} + shift + prev=tag + preserve_args="$preserve_args --tag" + ;; + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles + ;; + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + + *) + nonopt="$arg" + break + ;; + esac +done + +if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE +fi + +case $disable_libs in +no) + ;; +shared) + build_libtool_libs=no + build_old_libs=yes + ;; +static) + build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` + ;; +esac + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then + $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 + $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 + case $nonopt in + *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + mode=link + for arg + do + case $arg in + -c) + mode=compile + break + ;; + esac + done + ;; + *db | *dbx | *strace | *truss) + mode=execute + ;; + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute + + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi + fi + ;; + esac + fi + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$modename --help --mode=$mode' for more information." + + # These modes are in order of execution frequency so that they run quickly. + case $mode in + # libtool compile mode + compile) + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + if test -n "$libobj" ; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit $EXIT_FAILURE + fi + arg_mode=target + continue + ;; + + -static | -prefer-pic | -prefer-non-pic) + later="$later $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + + * ) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + case $lastarg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, and some SunOS ksh mistreat backslash-escaping + # in scan sets (worked around with variable expansion), + # and furthermore cannot handle '|' '&' '(' ')' in scan sets + # at all, so we specify them separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; + esac + + base_compile="$base_compile $lastarg" + done # for arg + + case $arg_mode in + arg) + $echo "$modename: you must specify an argument for -Xcompile" + exit $EXIT_FAILURE + ;; + target) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit $EXIT_FAILURE + ;; + *) + # Get the name of the library object. + [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + xform='[cCFSifmso]' + case $libobj in + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.ii) xform=ii ;; + *.class) xform=class ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; + *.java) xform=java ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + + case $libobj in + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -static) + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` + case $qlibobj in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qlibobj="\"$qlibobj\"" ;; + esac + test "X$libobj" != "X$qlibobj" \ + && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." + objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir= + else + xdir=$xdir/ + fi + lobj=${xdir}$objdir/$objname + + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + $run $rm $removelist + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $run ln "$progpath" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $echo "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + $echo "$srcfile" > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` + case $qsrcfile in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qsrcfile="\"$qsrcfile\"" ;; + esac + + $run $rm "$libobj" "${libobj}T" + + # Create a libtool object file (analogous to a ".la" file), + # but don't create it if we're doing a dry run. + test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + $show "$mv $output_obj $lobj" + if $run $mv $output_obj $lobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the PIC object to the libtool object file. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + else + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + fi + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" + ;; + esac + + case $prev in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + if test ! -f "$arg"; then + $echo "$modename: symbol file \`$arg' does not exist" + exit $EXIT_FAILURE + fi + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat $save_arg` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + done + else + $echo "$modename: link input file \`$save_arg' does not exist" + exit $EXIT_FAILURE + fi + arg=$save_arg + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + darwin_framework|darwin_framework_skip) + test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + prev= + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: more than one -exported-symbols argument is not allowed" + exit $EXIT_FAILURE + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework|-arch|-isysroot) + case " $CC " in + *" ${arg} ${1} "* | *" ${arg} ${1} "*) + prev=darwin_framework_skip ;; + *) compiler_flags="$compiler_flags $arg" + prev=darwin_framework ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; + esac + continue + ;; + + -L*) + dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + notinst_path="$notinst_path $dir" + fi + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs -framework System" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + -model) + compile_command="$compile_command $arg" + compiler_flags="$compiler_flags $arg" + finalize_command="$finalize_command $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m* pass through architecture-specific compiler args for GCC + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -pg pass through profiling flag for GCC + # @file GCC response files + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ + -t[45]*|-txscale*|@*) + + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # The PATH hackery in wrapper scripts is required on Windows + # in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -static) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done # argument parsing loop + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. + if test ! -d "$output_objdir"; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then + exit $exit_status + fi + fi + + # Determine the type of output + case $output in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + case $host in + *cygwin* | *mingw* | *pw32*) + # don't eliminate duplications in $postdeps and $predeps + duplicate_compiler_generated_deps=yes + ;; + *) + duplicate_compiler_generated_deps=$duplicate_deps + ;; + esac + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if test "X$duplicate_deps" = "Xyes" ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit $EXIT_FAILURE + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + for pass in $passes; do + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + compiler_flags="$compiler_flags $deplib" + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if (${SED} -e '2q' $lib | + grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + library_names= + old_library= + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + *) + $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + if eval $echo \"$deplib\" 2>/dev/null \ + | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + $echo + $echo "*** Warning: Trying to link with static lib archive $deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because the file extensions .$libext of this argument makes me believe" + $echo "*** that it is just a static archive that I should not used here." + else + $echo + $echo "*** Warning: Linking the shared library $output against the" + $echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + if test "$found" = yes || test -f "$lib"; then : + else + $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 + exit $EXIT_FAILURE + fi + + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit $EXIT_FAILURE + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + abs_ladir="$ladir" + fi + ;; + esac + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + $echo "$modename: warning: library \`$lib' was moved." 1>&2 + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $absdir" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes ; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + # This is a shared library + + # Warn about portability, can't link against -module's on + # some systems (darwin) + if test "$shouldnotlink" = yes && test "$pass" = link ; then + $echo + if test "$linkmode" = prog; then + $echo "*** Warning: Linking the executable $output against the loadable module" + else + $echo "*** Warning: Linking the shared library $output against the loadable module" + fi + $echo "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw*) + major=`expr $current - $age` + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + soname=`$echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$extract_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$old_archive_from_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a module then we can not link against + # it, someone is ignoring the new warnings I added + if /usr/bin/file -L $add 2> /dev/null | + $EGREP ": [^:]* bundle" >/dev/null ; then + $echo "** Warning, lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $echo + $echo "** And there doesn't seem to be a static archive available" + $echo "** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit $EXIT_FAILURE + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + $echo + $echo "*** Warning: This system can not link to static lib archive $lib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + $echo "*** But as you try to build a module library, libtool will still create " + $echo "*** a static module, that should work as long as the dlopening application" + $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + fi + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then + path="$absdir/$objdir" + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="$absdir" + fi + depdepl= + case $host in + *-*-darwin*) + # we do not want to link against static libs, + # but need to link against shared + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$path/$depdepl" ; then + depdepl="$path/$depdepl" + fi + # do not add paths which are already there + case " $newlib_search_path " in + *" $path "*) ;; + *) newlib_search_path="$newlib_search_path $path";; + esac + fi + path="" + ;; + *) + path="-L$path" + ;; + esac + ;; + -l*) + case $host in + *-*-darwin*) + # Again, we only want to link against shared libraries + eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` + for tmp in $newlib_search_path ; do + if test -f "$tmp/lib$tmp_libs.dylib" ; then + eval depdepl="$tmp/lib$tmp_libs.dylib" + break + fi + done + path="" + ;; + *) continue ;; + esac + ;; + *) continue ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + case " $deplibs " in + *" $depdepl "*) ;; + *) deplibs="$depdepl $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi + + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 + fi + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 + exit $EXIT_FAILURE + else + $echo + $echo "*** Warning: Linking the shared library $output against the non-libtool" + $echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + if test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 + fi + + set dummy $rpath + if test "$#" -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 + fi + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + IFS="$save_ifs" + + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$2" + number_minor="$3" + number_revision="$4" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows) + current=`expr $number_major + $number_minor` + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + current=`expr $number_major + $number_minor - 1` + age="$number_minor" + revision="$number_minor" + ;; + esac + ;; + no) + current="$2" + revision="$3" + age="$4" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + if test "$age" -gt "$current"; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` + verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; + + irix | nonstopux) + major=`expr $current - $age + 1` + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + iface=`expr $revision - $loop` + loop=`expr $loop - 1` + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + ;; + + osf) + major=.`expr $current - $age` + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + major=`expr $current - $age` + versuffix="-$major" + ;; + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + fi + + if test "$mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$echo "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + if test -n "$removelist"; then + $show "${rm}r $removelist" + $run ${rm}r $removelist + fi + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + for path in $notinst_path; do + lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` + deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` + dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` + done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs -framework System" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $rm conftest.c + cat > conftest.c </dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null \ + | grep " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for file magic test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a file magic. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do + name=`expr $a_deplib : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval $echo \"$potent_lib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a regex pattern. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` + done + fi + if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ + | grep . >/dev/null; then + $echo + if test "X$deplibs_check_method" = "Xnone"; then + $echo "*** Warning: inter-library dependencies are not supported in this platform." + else + $echo "*** Warning: inter-library dependencies are not known to be supported." + fi + $echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + $echo + $echo "*** Warning: libtool could not satisfy all declared inter-library" + $echo "*** dependencies of module $libname. Therefore, libtool will create" + $echo "*** a static module, that should work as long as the dlopening" + $echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + $echo "*** The inter-library dependencies that have been dropped here will be" + $echo "*** automatically added whenever a program is linked with this library" + $echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + $echo + $echo "*** Since this library must not contain undefined symbols," + $echo "*** because either the platform does not support them or" + $echo "*** it was explicitly requested with -no-undefined," + $echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + deplibs="$new_libs" + + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" + shift; shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + if len=`expr "X$cmd" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + $show "$cmd" + $run eval "$cmd" || exit $? + skipped_export=false + else + # The command line is too long to execute in one step. + $show "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex"; then + $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + libobjs="$libobjs $func_extract_archives_result" + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise. + $echo "creating reloadable object files..." + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + output_la=`$echo "X$output" | $Xsed -e "$basename"` + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + delfiles= + last_robj= + k=1 + output=$output_objdir/$output_la-${k}.$objext + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + eval test_cmds=\"$reload_cmds $objlist $last_robj\" + if test "X$objlist" = X || + { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; }; then + objlist="$objlist $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + k=`expr $k + 1` + output=$output_objdir/$output_la-${k}.$objext + objlist=$obj + len=1 + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + + if ${skipped_export-false}; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + libobjs=$output + # Append the command to create the export file. + eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" + fi + + # Set up a command to remove the reloadable object files + # after they are used. + i=0 + while test "$i" -lt "$k" + do + i=`expr $i + 1` + delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" + done + + $echo "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + + # Append the command to remove the reloadable object files + # to the just-reset $cmds. + eval cmds=\"\$cmds~\$rm $delfiles\" + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 + fi + + case $output in + *.lo) + if test -n "$objs$old_deplibs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 + exit $EXIT_FAILURE + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $run $rm $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${obj}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $run eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + esac + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 + fi + + if test "$preload" = yes; then + if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && + test "$dlopen_self_static" = unknown; then + $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." + fi + fi + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + case $host in + *darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + if test "$tagname" = CXX ; then + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + fi + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + dlsyms= + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + dlsyms="${outputname}S.c" + else + $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 + fi + fi + + if test -n "$dlsyms"; then + case $dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${outputname}.nm" + + $show "$rm $nlist ${nlist}S ${nlist}T" + $run $rm "$nlist" "${nlist}S" "${nlist}T" + + # Parse the name list into a source file. + $show "creating $output_objdir/$dlsyms" + + test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* Prevent the only kind of declaration conflicts we can make. */ +#define lt_preloaded_symbols some_other_symbol + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + $show "generating symbol list for \`$output'" + + test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for arg in $progfiles; do + $show "extracting global C symbols from \`$arg'" + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then + $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $run $rm $export_symbols + $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* ) + $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + else + $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* ) + $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" + name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` + $run eval '$echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -z "$run"; then + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if grep -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + grep -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else + $echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ + +#undef lt_preloaded_symbols + +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +" + + case $host in + *cygwin* | *mingw* ) + $echo >> "$output_objdir/$dlsyms" "\ +/* DATA imports from DLLs on WIN32 can't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs */ +struct { +" + ;; + * ) + $echo >> "$output_objdir/$dlsyms" "\ +const struct { +" + ;; + esac + + + $echo >> "$output_objdir/$dlsyms" "\ + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[] = +{\ +" + + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" + + $echo >> "$output_objdir/$dlsyms" "\ + {0, (lt_ptr) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + fi + + pic_flag_for_symtable= + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; + esac;; + *-*-hpux*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag";; + esac + esac + + # Now compile the dynamic symbol file. + $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. + case $host in + *cygwin* | *mingw* ) + if test -f "$output_objdir/${outputname}.def" ; then + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` + else + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + fi + ;; + * ) + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + ;; + esac + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 + exit $EXIT_FAILURE + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" + exit_status=$? + + # Delete the generated files. + if test -n "$dlsyms"; then + $show "$rm $output_objdir/${outputname}S.${objext}" + $run $rm "$output_objdir/${outputname}S.${objext}" + fi + + exit $exit_status + fi + + if test -n "$shlibpath_var"; then + # We should set the shlibpath_var + rpath= + for dir in $temp_rpath; do + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) + # Absolute path. + rpath="$rpath$dir:" + ;; + *) + # Relative path: add a thisdir entry. + rpath="$rpath\$thisdir/$dir:" + ;; + esac + done + temp_rpath="$rpath" + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $run $rm $output + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 + $echo "$modename: \`$output' will be relinked during installation" 1>&2 + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + + $show "$link_command" + $run eval "$link_command" || exit $? + + # Now create the wrapper script. + $show "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $echo for shipping. + if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if our run command is non-null. + if test -z "$run"; then + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + output_name=`basename $output` + output_path=`dirname $output` + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $rm $cwrappersource $cwrapper + trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + cat > $cwrappersource <> $cwrappersource<<"EOF" +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +/* -DDEBUG is fairly common in CFLAGS. */ +#undef DEBUG +#if defined DEBUGWRAPPER +# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) +#else +# define DEBUG(format, ...) +#endif + +const char *program_name = NULL; + +void * xmalloc (size_t num); +char * xstrdup (const char *string); +const char * base_name (const char *name); +char * find_executable(const char *wrapper); +int check_executable(const char *path); +char * strendzap(char *str, const char *pat); +void lt_fatal (const char *message, ...); + +int +main (int argc, char *argv[]) +{ + char **newargz; + int i; + + program_name = (char *) xstrdup (base_name (argv[0])); + DEBUG("(main) argv[0] : %s\n",argv[0]); + DEBUG("(main) program_name : %s\n",program_name); + newargz = XMALLOC(char *, argc+2); +EOF + + cat >> $cwrappersource <> $cwrappersource <<"EOF" + newargz[1] = find_executable(argv[0]); + if (newargz[1] == NULL) + lt_fatal("Couldn't find %s", argv[0]); + DEBUG("(main) found exe at : %s\n",newargz[1]); + /* we know the script has the same name, without the .exe */ + /* so make sure newargz[1] doesn't end in .exe */ + strendzap(newargz[1],".exe"); + for (i = 1; i < argc; i++) + newargz[i+1] = xstrdup(argv[i]); + newargz[argc+1] = NULL; + + for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" + return 127; +} + +void * +xmalloc (size_t num) +{ + void * p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +; +} + +const char * +base_name (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char)name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} + +int +check_executable(const char * path) +{ + struct stat st; + + DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) && + ( + /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ +#if defined (S_IXOTH) + ((st.st_mode & S_IXOTH) == S_IXOTH) || +#endif +#if defined (S_IXGRP) + ((st.st_mode & S_IXGRP) == S_IXGRP) || +#endif + ((st.st_mode & S_IXUSR) == S_IXUSR)) + ) + return 1; + else + return 0; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise */ +char * +find_executable (const char* wrapper) +{ + int has_slash = 0; + const char* p; + const char* p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char* concat_name; + + DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char* path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char* q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR(*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen(tmp); + concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen(tmp); + concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + return NULL; +} + +char * +strendzap(char *str, const char *pat) +{ + size_t len, patlen; + + assert(str != NULL); + assert(pat != NULL); + + len = strlen(str); + patlen = strlen(pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp(str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char * mode, + const char * message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} +EOF + # we should really use a build-platform specific compiler + # here, but OTOH, the wrappers (shell script and this C one) + # are only useful if you want to execute the "real" binary. + # Since the "real" binary is built for $host, then this + # wrapper might as well be built for $host, too. + $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource + ;; + esac + $rm $output + trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + + $echo > $output "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variable: + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$echo are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + echo=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$echo works! + : + else + # Restart under the correct shell, and then maybe \$echo will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $echo >> $output "\ + + # Find the directory that this script lives in. + thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $echo >> $output "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $mkdir \"\$progdir\" + else + $rm \"\$progdir/\$file\" + fi" + + $echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $echo \"\$relink_command_output\" >&2 + $rm \"\$progdir/\$file\" + exit $EXIT_FAILURE + fi + fi + + $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $rm \"\$progdir/\$program\"; + $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $rm \"\$progdir/\$file\" + fi" + else + $echo >> $output "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $echo >> $output "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $echo >> $output "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $echo >> $output "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $echo >> $output "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $echo >> $output "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + exit $EXIT_FAILURE + fi + else + # The program doesn't exist. + \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + $echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit $EXIT_FAILURE + fi +fi\ +" + chmod +x $output + fi + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $addlibs + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + $echo "X$obj" | $Xsed -e 's%^.*/%%' + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "copying selected object files to avoid basename conflicts..." + + if test -z "$gentop"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$gentop"; then + exit $exit_status + fi + fi + + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + counter=`expr $counter + 1` + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + $run ln "$obj" "$gentop/$newobj" || + $run cp "$obj" "$gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" + ;; + *) oldobjs="$oldobjs $obj" ;; + esac + done + fi + + eval cmds=\"$old_archive_cmds\" + + if len=`expr "X$cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + $echo "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + for obj in $save_oldobjs + do + oldobjs="$objlist $obj" + objlist="$objlist $obj" + eval test_cmds=\"$old_archive_cmds\" + if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + eval cmd=\"$cmd\" + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$generated"; then + $show "${rm}r$generated" + $run ${rm}r$generated + fi + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + $show "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + + # Only create the output if not a dry run. + if test -z "$run"; then + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + for lib in $dlfiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdlfiles="$newdlfiles $libdir/$name" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" + done + dlprefiles="$newdlprefiles" + fi + $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac + $echo > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $echo >> $output "\ +relink_command=\"$relink_command\"" + fi + done + fi + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + ;; + esac + exit $EXIT_SUCCESS + ;; + + # libtool install mode + install) + modename="$modename: install" + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $echo "X$nonopt" | grep shtool > /dev/null; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$arg " + arg="$1" + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog$arg" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) prev=$arg ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog $arg" + done + + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test -z "$files"; then + if test -z "$dest"; then + $echo "$modename: no file or destination specified" 1>&2 + else + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Strip any trailing slash from the destination. + dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` + test "X$destdir" = "X$dest" && destdir=. + destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + + # Not a directory, so check to see that there is only one file specified. + set dummy $files + if test "$#" -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + library_names= + old_library= + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ + test "X$dir" = "X$file/" && dir= + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + if test "$inst_prefix_dir" = "$destdir"; then + $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + exit $EXIT_FAILURE + fi + fi + + # See the names of the shared library. + set dummy $library_names + if test -n "$2"; then + realname="$2" + shift + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + $show "$install_prog $dir/$srcname $destdir/$realname" + $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$striplib $destdir/$realname" + $run eval "$striplib $destdir/$realname" || exit $? + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + if test "$linkname" != "$realname"; then + $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + fi + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + cmds=$postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + fi + + # Install the pseudo-library for information purposes. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + instname="$dir/$name"i + $show "$install_prog $instname $destdir/$name" + $run eval "$install_prog $instname $destdir/$name" || exit $? + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + # Install the libtool object if requested. + if test -n "$destfile"; then + $show "$install_prog $file $destfile" + $run eval "$install_prog $file $destfile" || exit $? + fi + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + file=`$echo $file|${SED} 's,.exe$,,'` + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin*|*mingw*) + wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` + ;; + *) + wrapper=$file + ;; + esac + if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then + notinst_deplibs= + relink_command= + + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # + # If there is no directory component, then add one. + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; + esac + + # Check the variables that should have been set. + if test -z "$notinst_deplibs"; then + $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 + exit $EXIT_FAILURE + fi + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + # If there is no directory component, then add one. + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + fi + libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 + finalize=no + fi + done + + relink_command= + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # + # If there is no directory component, then add one. + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; + esac + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then + tmpdir=`func_mktempdir` + file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + ${rm}r "$tmpdir" + continue + fi + file="$outputname" + else + $echo "$modename: warning: cannot relink \`$file'" 1>&2 + fi + else + # Install the binary that we compiled earlier. + file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` + ;; + esac + ;; + esac + $show "$install_prog$stripme $file $destfile" + $run eval "$install_prog\$stripme \$file \$destfile" || exit $? + test -n "$outputname" && ${rm}r "$tmpdir" + ;; + esac + done + + for file in $staticlibs; do + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + + if test -n "$stripme" && test -n "$old_striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + + # Do each command in the postinstall commands. + cmds=$old_postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$future_libdirs"; then + $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 + fi + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi + ;; + + # libtool finish mode + finish) + modename="$modename: finish" + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + cmds=$finish_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" + done + IFS="$save_ifs" + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $run eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + test "$show" = : && exit $EXIT_SUCCESS + + $echo "X----------------------------------------------------------------------" | $Xsed + $echo "Libraries have been installed in:" + for libdir in $libdirs; do + $echo " $libdir" + done + $echo + $echo "If you ever happen to want to link against installed libraries" + $echo "in a given directory, LIBDIR, you must either use libtool, and" + $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + $echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + $echo " during execution" + fi + if test -n "$runpath_var"; then + $echo " - add LIBDIR to the \`$runpath_var' environment variable" + $echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $echo + $echo "See any operating system documentation about shared libraries for" + $echo "more information, such as the ld(1) and ld.so(8) manual pages." + $echo "X----------------------------------------------------------------------" | $Xsed + exit $EXIT_SUCCESS + ;; + + # libtool execute mode + execute) + modename="$modename: execute" + + # The first argument is the command name. + cmd="$nonopt" + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" + exit $EXIT_FAILURE + fi + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Read the libtool library. + dlname= + library_names= + + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" + continue + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 + exit $EXIT_FAILURE + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + ;; + + *) + $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` + args="$args \"$file\"" + done + + if test -z "$run"; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi + if test "${save_LANG+set}" = set; then + LANG="$save_LANG"; export LANG + fi + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + fi + $echo "$cmd$args" + exit $EXIT_SUCCESS + fi + ;; + + # libtool clean and uninstall mode + clean | uninstall) + modename="$modename: $mode" + rm="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) rm="$rm $arg"; rmforce=yes ;; + -*) rm="$rm $arg" ;; + *) files="$files $arg" ;; + esac + done + + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + rmdirs= + + origobjdir="$objdir" + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$file"; then + dir=. + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if (test -L "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + + case "$mode" in + clean) + case " $library_names " in + # " " in the beginning catches empty $dlname + *" $dlname "*) ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; + esac + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + cmds=$postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + cmds=$old_postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + + # Read the .lo file + . $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" \ + && test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" \ + && test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + file=`$echo $file|${SED} 's,.exe$,,'` + noexename=`$echo $name|${SED} 's,.exe$,,'` + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$noexename + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + $show "rmdir $dir" + $run rmdir $dir >/dev/null 2>&1 + fi + done + + exit $exit_status + ;; + + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + if test -z "$exec_cmd"; then + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit $EXIT_FAILURE + fi +fi # test -z "$show_help" + +if test -n "$exec_cmd"; then + eval exec $exec_cmd + exit $EXIT_FAILURE +fi + +# We need to display help for each of the modes. +case $mode in +"") $echo \ +"Usage: $modename [OPTION]... [MODE-ARG]... + +Provide generalized library-building support services. + + --config show all configuration variables + --debug enable verbose shell tracing +-n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --finish same as \`--mode=finish' + --help display this help message and exit + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + --version print version information + +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +a more detailed description of MODE. + +Report bugs to ." + exit $EXIT_SUCCESS + ;; + +clean) + $echo \ +"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + +compile) + $echo \ +"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -static always build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + +execute) + $echo \ +"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + +finish) + $echo \ +"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + +install) + $echo \ +"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + +link) + $echo \ +"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + +uninstall) + $echo \ +"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + +*) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; +esac + +$echo +$echo "Try \`$modename --help' for more information about other modes." + +exit $? + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +disable_libs=shared +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +disable_libs=static +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: diff --git a/jni/vnc/LibVNCServer-0.9.9/missing b/jni/vnc/LibVNCServer-0.9.9/missing new file mode 100755 index 0000000..28055d2 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/missing @@ -0,0 +1,376 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2009-04-28.21; # UTC + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case $1 in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) + # Not GNU programs, they don't have --version. + ;; + + tar*) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case $program in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case $f in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te*) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison*|yacc*) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if test $# -ne 1; then + eval LASTARG="\${$#}" + case $LASTARG in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if test ! -f y.tab.h; then + echo >y.tab.h + fi + if test ! -f y.tab.c; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex*|flex*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if test $# -ne 1; then + eval LASTARG="\${$#}" + case $LASTARG in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if test ! -f lex.yy.c; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit $? + fi + ;; + + makeinfo*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + tar*) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case $firstarg in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case $firstarg in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/jni/vnc/LibVNCServer-0.9.9/rfb/default8x16.h b/jni/vnc/LibVNCServer-0.9.9/rfb/default8x16.h new file mode 100644 index 0000000..252f411 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/rfb/default8x16.h @@ -0,0 +1,261 @@ +static unsigned char default8x16FontData[4096+1]={ +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x7e,0x81,0xa5,0x81,0x81,0xbd,0x99,0x81,0x81,0x7e,0x00,0x00,0x00,0x00, +0x00,0x00,0x7e,0xff,0xdb,0xff,0xff,0xc3,0xe7,0xff,0xff,0x7e,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x6c,0xfe,0xfe,0xfe,0xfe,0x7c,0x38,0x10,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x10,0x38,0x7c,0xfe,0x7c,0x38,0x10,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x18,0x3c,0x3c,0xe7,0xe7,0xe7,0x18,0x18,0x3c,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x18,0x3c,0x7e,0xff,0xff,0x7e,0x18,0x18,0x3c,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x3c,0x3c,0x18,0x00,0x00,0x00,0x00,0x00,0x00, +0xff,0xff,0xff,0xff,0xff,0xff,0xe7,0xc3,0xc3,0xe7,0xff,0xff,0xff,0xff,0xff,0xff, +0x00,0x00,0x00,0x00,0x00,0x3c,0x66,0x42,0x42,0x66,0x3c,0x00,0x00,0x00,0x00,0x00, +0xff,0xff,0xff,0xff,0xff,0xc3,0x99,0xbd,0xbd,0x99,0xc3,0xff,0xff,0xff,0xff,0xff, +0x00,0x00,0x1e,0x0e,0x1a,0x32,0x78,0xcc,0xcc,0xcc,0xcc,0x78,0x00,0x00,0x00,0x00, +0x00,0x00,0x3c,0x66,0x66,0x66,0x66,0x3c,0x18,0x7e,0x18,0x18,0x00,0x00,0x00,0x00, +0x00,0x00,0x3f,0x33,0x3f,0x30,0x30,0x30,0x30,0x70,0xf0,0xe0,0x00,0x00,0x00,0x00, +0x00,0x00,0x7f,0x63,0x7f,0x63,0x63,0x63,0x63,0x67,0xe7,0xe6,0xc0,0x00,0x00,0x00, +0x00,0x00,0x00,0x18,0x18,0xdb,0x3c,0xe7,0x3c,0xdb,0x18,0x18,0x00,0x00,0x00,0x00, +0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfe,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00, +0x00,0x02,0x06,0x0e,0x1e,0x3e,0xfe,0x3e,0x1e,0x0e,0x06,0x02,0x00,0x00,0x00,0x00, +0x00,0x00,0x18,0x3c,0x7e,0x18,0x18,0x18,0x7e,0x3c,0x18,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x66,0x66,0x00,0x00,0x00,0x00, +0x00,0x00,0x7f,0xdb,0xdb,0xdb,0x7b,0x1b,0x1b,0x1b,0x1b,0x1b,0x00,0x00,0x00,0x00, +0x00,0x7c,0xc6,0x60,0x38,0x6c,0xc6,0xc6,0x6c,0x38,0x0c,0xc6,0x7c,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xfe,0xfe,0xfe,0xfe,0x00,0x00,0x00,0x00, +0x00,0x00,0x18,0x3c,0x7e,0x18,0x18,0x18,0x7e,0x3c,0x18,0x7e,0x00,0x00,0x00,0x00, +0x00,0x00,0x18,0x3c,0x7e,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00, +0x00,0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x7e,0x3c,0x18,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x18,0x0c,0xfe,0x0c,0x18,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x30,0x60,0xfe,0x60,0x30,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0xc0,0xc0,0xc0,0xfe,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x24,0x66,0xff,0x66,0x24,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x10,0x38,0x38,0x7c,0x7c,0xfe,0xfe,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0xfe,0xfe,0x7c,0x7c,0x38,0x38,0x10,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x18,0x3c,0x3c,0x3c,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00, +0x00,0x66,0x66,0x66,0x24,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x6c,0x6c,0xfe,0x6c,0x6c,0x6c,0xfe,0x6c,0x6c,0x00,0x00,0x00,0x00, +0x18,0x18,0x7c,0xc6,0xc2,0xc0,0x7c,0x06,0x06,0x86,0xc6,0x7c,0x18,0x18,0x00,0x00, +0x00,0x00,0x00,0x00,0xc2,0xc6,0x0c,0x18,0x30,0x60,0xc6,0x86,0x00,0x00,0x00,0x00, +0x00,0x00,0x38,0x6c,0x6c,0x38,0x76,0xdc,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x30,0x30,0x30,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x0c,0x18,0x30,0x30,0x30,0x30,0x30,0x30,0x18,0x0c,0x00,0x00,0x00,0x00, +0x00,0x00,0x30,0x18,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x18,0x30,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x66,0x3c,0xff,0x3c,0x66,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x7e,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x18,0x30,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x02,0x06,0x0c,0x18,0x30,0x60,0xc0,0x80,0x00,0x00,0x00,0x00, +0x00,0x00,0x7c,0xc6,0xc6,0xce,0xde,0xf6,0xe6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x18,0x38,0x78,0x18,0x18,0x18,0x18,0x18,0x18,0x7e,0x00,0x00,0x00,0x00, +0x00,0x00,0x7c,0xc6,0x06,0x0c,0x18,0x30,0x60,0xc0,0xc6,0xfe,0x00,0x00,0x00,0x00, +0x00,0x00,0x7c,0xc6,0x06,0x06,0x3c,0x06,0x06,0x06,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x0c,0x1c,0x3c,0x6c,0xcc,0xfe,0x0c,0x0c,0x0c,0x1e,0x00,0x00,0x00,0x00, +0x00,0x00,0xfe,0xc0,0xc0,0xc0,0xfc,0x06,0x06,0x06,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x38,0x60,0xc0,0xc0,0xfc,0xc6,0xc6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0xfe,0xc6,0x06,0x06,0x0c,0x18,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00, +0x00,0x00,0x7c,0xc6,0xc6,0xc6,0x7c,0xc6,0xc6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x7c,0xc6,0xc6,0xc6,0x7e,0x06,0x06,0x06,0x0c,0x78,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x30,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x06,0x0c,0x18,0x30,0x60,0x30,0x18,0x0c,0x06,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x7e,0x00,0x00,0x7e,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x60,0x30,0x18,0x0c,0x06,0x0c,0x18,0x30,0x60,0x00,0x00,0x00,0x00, +0x00,0x00,0x7c,0xc6,0xc6,0x0c,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00, +0x00,0x00,0x7c,0xc6,0xc6,0xc6,0xde,0xde,0xde,0xdc,0xc0,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x10,0x38,0x6c,0xc6,0xc6,0xfe,0xc6,0xc6,0xc6,0xc6,0x00,0x00,0x00,0x00, +0x00,0x00,0xfc,0x66,0x66,0x66,0x7c,0x66,0x66,0x66,0x66,0xfc,0x00,0x00,0x00,0x00, +0x00,0x00,0x3c,0x66,0xc2,0xc0,0xc0,0xc0,0xc0,0xc2,0x66,0x3c,0x00,0x00,0x00,0x00, +0x00,0x00,0xf8,0x6c,0x66,0x66,0x66,0x66,0x66,0x66,0x6c,0xf8,0x00,0x00,0x00,0x00, +0x00,0x00,0xfe,0x66,0x62,0x68,0x78,0x68,0x60,0x62,0x66,0xfe,0x00,0x00,0x00,0x00, +0x00,0x00,0xfe,0x66,0x62,0x68,0x78,0x68,0x60,0x60,0x60,0xf0,0x00,0x00,0x00,0x00, +0x00,0x00,0x3c,0x66,0xc2,0xc0,0xc0,0xde,0xc6,0xc6,0x66,0x3a,0x00,0x00,0x00,0x00, +0x00,0x00,0xc6,0xc6,0xc6,0xc6,0xfe,0xc6,0xc6,0xc6,0xc6,0xc6,0x00,0x00,0x00,0x00, +0x00,0x00,0x3c,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3c,0x00,0x00,0x00,0x00, +0x00,0x00,0x1e,0x0c,0x0c,0x0c,0x0c,0x0c,0xcc,0xcc,0xcc,0x78,0x00,0x00,0x00,0x00, +0x00,0x00,0xe6,0x66,0x66,0x6c,0x78,0x78,0x6c,0x66,0x66,0xe6,0x00,0x00,0x00,0x00, +0x00,0x00,0xf0,0x60,0x60,0x60,0x60,0x60,0x60,0x62,0x66,0xfe,0x00,0x00,0x00,0x00, +0x00,0x00,0xc3,0xe7,0xff,0xff,0xdb,0xc3,0xc3,0xc3,0xc3,0xc3,0x00,0x00,0x00,0x00, +0x00,0x00,0xc6,0xe6,0xf6,0xfe,0xde,0xce,0xc6,0xc6,0xc6,0xc6,0x00,0x00,0x00,0x00, +0x00,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0xfc,0x66,0x66,0x66,0x7c,0x60,0x60,0x60,0x60,0xf0,0x00,0x00,0x00,0x00, +0x00,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xd6,0xde,0x7c,0x0c,0x0e,0x00,0x00, +0x00,0x00,0xfc,0x66,0x66,0x66,0x7c,0x6c,0x66,0x66,0x66,0xe6,0x00,0x00,0x00,0x00, +0x00,0x00,0x7c,0xc6,0xc6,0x60,0x38,0x0c,0x06,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0xff,0xdb,0x99,0x18,0x18,0x18,0x18,0x18,0x18,0x3c,0x00,0x00,0x00,0x00, +0x00,0x00,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0xc3,0xc3,0xc3,0xc3,0xc3,0xc3,0xc3,0x66,0x3c,0x18,0x00,0x00,0x00,0x00, +0x00,0x00,0xc3,0xc3,0xc3,0xc3,0xc3,0xdb,0xdb,0xff,0x66,0x66,0x00,0x00,0x00,0x00, +0x00,0x00,0xc3,0xc3,0x66,0x3c,0x18,0x18,0x3c,0x66,0xc3,0xc3,0x00,0x00,0x00,0x00, +0x00,0x00,0xc3,0xc3,0xc3,0x66,0x3c,0x18,0x18,0x18,0x18,0x3c,0x00,0x00,0x00,0x00, +0x00,0x00,0xff,0xc3,0x86,0x0c,0x18,0x30,0x60,0xc1,0xc3,0xff,0x00,0x00,0x00,0x00, +0x00,0x00,0x3c,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x3c,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x80,0xc0,0xe0,0x70,0x38,0x1c,0x0e,0x06,0x02,0x00,0x00,0x00,0x00, +0x00,0x00,0x3c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x3c,0x00,0x00,0x00,0x00, +0x10,0x38,0x6c,0xc6,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x00,0x00, +0x30,0x30,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x00,0xe0,0x60,0x60,0x78,0x6c,0x66,0x66,0x66,0x66,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x7c,0xc6,0xc0,0xc0,0xc0,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x1c,0x0c,0x0c,0x3c,0x6c,0xcc,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x7c,0xc6,0xfe,0xc0,0xc0,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x38,0x6c,0x64,0x60,0xf0,0x60,0x60,0x60,0x60,0xf0,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x76,0xcc,0xcc,0xcc,0xcc,0xcc,0x7c,0x0c,0xcc,0x78,0x00, +0x00,0x00,0xe0,0x60,0x60,0x6c,0x76,0x66,0x66,0x66,0x66,0xe6,0x00,0x00,0x00,0x00, +0x00,0x00,0x18,0x18,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3c,0x00,0x00,0x00,0x00, +0x00,0x00,0x06,0x06,0x00,0x0e,0x06,0x06,0x06,0x06,0x06,0x06,0x66,0x66,0x3c,0x00, +0x00,0x00,0xe0,0x60,0x60,0x66,0x6c,0x78,0x78,0x6c,0x66,0xe6,0x00,0x00,0x00,0x00, +0x00,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3c,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0xe6,0xff,0xdb,0xdb,0xdb,0xdb,0xdb,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0xdc,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0xdc,0x66,0x66,0x66,0x66,0x66,0x7c,0x60,0x60,0xf0,0x00, +0x00,0x00,0x00,0x00,0x00,0x76,0xcc,0xcc,0xcc,0xcc,0xcc,0x7c,0x0c,0x0c,0x1e,0x00, +0x00,0x00,0x00,0x00,0x00,0xdc,0x76,0x66,0x60,0x60,0x60,0xf0,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x7c,0xc6,0x60,0x38,0x0c,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x10,0x30,0x30,0xfc,0x30,0x30,0x30,0x30,0x36,0x1c,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0xc3,0xc3,0xc3,0xc3,0x66,0x3c,0x18,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0xc3,0xc3,0xc3,0xdb,0xdb,0xff,0x66,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0xc3,0x66,0x3c,0x18,0x3c,0x66,0xc3,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7e,0x06,0x0c,0xf8,0x00, +0x00,0x00,0x00,0x00,0x00,0xfe,0xcc,0x18,0x30,0x60,0xc6,0xfe,0x00,0x00,0x00,0x00, +0x00,0x00,0x0e,0x18,0x18,0x18,0x70,0x18,0x18,0x18,0x18,0x0e,0x00,0x00,0x00,0x00, +0x00,0x00,0x18,0x18,0x18,0x18,0x00,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00, +0x00,0x00,0x70,0x18,0x18,0x18,0x0e,0x18,0x18,0x18,0x18,0x70,0x00,0x00,0x00,0x00, +0x00,0x00,0x76,0xdc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x10,0x38,0x6c,0xc6,0xc6,0xc6,0xfe,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x3c,0x66,0xc2,0xc0,0xc0,0xc0,0xc2,0x66,0x3c,0x0c,0x06,0x7c,0x00,0x00, +0x00,0x00,0xcc,0x00,0x00,0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x0c,0x18,0x30,0x00,0x7c,0xc6,0xfe,0xc0,0xc0,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x10,0x38,0x6c,0x00,0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x00,0xcc,0x00,0x00,0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x60,0x30,0x18,0x00,0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x38,0x6c,0x38,0x00,0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x3c,0x66,0x60,0x60,0x66,0x3c,0x0c,0x06,0x3c,0x00,0x00,0x00, +0x00,0x10,0x38,0x6c,0x00,0x7c,0xc6,0xfe,0xc0,0xc0,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0xc6,0x00,0x00,0x7c,0xc6,0xfe,0xc0,0xc0,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x60,0x30,0x18,0x00,0x7c,0xc6,0xfe,0xc0,0xc0,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x66,0x00,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3c,0x00,0x00,0x00,0x00, +0x00,0x18,0x3c,0x66,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3c,0x00,0x00,0x00,0x00, +0x00,0x60,0x30,0x18,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3c,0x00,0x00,0x00,0x00, +0x00,0xc6,0x00,0x10,0x38,0x6c,0xc6,0xc6,0xfe,0xc6,0xc6,0xc6,0x00,0x00,0x00,0x00, +0x38,0x6c,0x38,0x00,0x38,0x6c,0xc6,0xc6,0xfe,0xc6,0xc6,0xc6,0x00,0x00,0x00,0x00, +0x18,0x30,0x60,0x00,0xfe,0x66,0x60,0x7c,0x60,0x60,0x66,0xfe,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x6e,0x3b,0x1b,0x7e,0xd8,0xdc,0x77,0x00,0x00,0x00,0x00, +0x00,0x00,0x3e,0x6c,0xcc,0xcc,0xfe,0xcc,0xcc,0xcc,0xcc,0xce,0x00,0x00,0x00,0x00, +0x00,0x10,0x38,0x6c,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0xc6,0x00,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x60,0x30,0x18,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x30,0x78,0xcc,0x00,0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x60,0x30,0x18,0x00,0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x00,0xc6,0x00,0x00,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7e,0x06,0x0c,0x78,0x00, +0x00,0xc6,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0xc6,0x00,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x18,0x18,0x7e,0xc3,0xc0,0xc0,0xc0,0xc3,0x7e,0x18,0x18,0x00,0x00,0x00,0x00, +0x00,0x38,0x6c,0x64,0x60,0xf0,0x60,0x60,0x60,0x60,0xe6,0xfc,0x00,0x00,0x00,0x00, +0x00,0x00,0xc3,0x66,0x3c,0x18,0xff,0x18,0xff,0x18,0x18,0x18,0x00,0x00,0x00,0x00, +0x00,0xfc,0x66,0x66,0x7c,0x62,0x66,0x6f,0x66,0x66,0x66,0xf3,0x00,0x00,0x00,0x00, +0x00,0x0e,0x1b,0x18,0x18,0x18,0x7e,0x18,0x18,0x18,0x18,0x18,0xd8,0x70,0x00,0x00, +0x00,0x18,0x30,0x60,0x00,0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x0c,0x18,0x30,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3c,0x00,0x00,0x00,0x00, +0x00,0x18,0x30,0x60,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x18,0x30,0x60,0x00,0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0x76,0x00,0x00,0x00,0x00, +0x00,0x00,0x76,0xdc,0x00,0xdc,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00, +0x76,0xdc,0x00,0xc6,0xe6,0xf6,0xfe,0xde,0xce,0xc6,0xc6,0xc6,0x00,0x00,0x00,0x00, +0x00,0x3c,0x6c,0x6c,0x3e,0x00,0x7e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x38,0x6c,0x6c,0x38,0x00,0x7c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x30,0x30,0x00,0x30,0x30,0x60,0xc0,0xc6,0xc6,0x7c,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0xfe,0xc0,0xc0,0xc0,0xc0,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0xfe,0x06,0x06,0x06,0x06,0x00,0x00,0x00,0x00,0x00, +0x00,0xc0,0xc0,0xc2,0xc6,0xcc,0x18,0x30,0x60,0xce,0x9b,0x06,0x0c,0x1f,0x00,0x00, +0x00,0xc0,0xc0,0xc2,0xc6,0xcc,0x18,0x30,0x66,0xce,0x96,0x3e,0x06,0x06,0x00,0x00, +0x00,0x00,0x18,0x18,0x00,0x18,0x18,0x18,0x3c,0x3c,0x3c,0x18,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x36,0x6c,0xd8,0x6c,0x36,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0xd8,0x6c,0x36,0x6c,0xd8,0x00,0x00,0x00,0x00,0x00,0x00, +0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44, +0x55,0xaa,0x55,0xaa,0x55,0xaa,0x55,0xaa,0x55,0xaa,0x55,0xaa,0x55,0xaa,0x55,0xaa, +0xdd,0x77,0xdd,0x77,0xdd,0x77,0xdd,0x77,0xdd,0x77,0xdd,0x77,0xdd,0x77,0xdd,0x77, +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xf8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x18,0x18,0x18,0x18,0x18,0xf8,0x18,0xf8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xf6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xfe,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x00,0x00,0x00,0x00,0x00,0xf8,0x18,0xf8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x36,0x36,0x36,0x36,0x36,0xf6,0x06,0xf6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x00,0x00,0x00,0x00,0x00,0xfe,0x06,0xf6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x36,0x36,0x36,0x36,0x36,0xf6,0x06,0xfe,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xfe,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x18,0x18,0x18,0x18,0x18,0xf8,0x18,0xf8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xf8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1f,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1f,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xff,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x18,0x18,0x18,0x18,0x18,0x1f,0x18,0x1f,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x3f,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x3f,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x36,0x36,0x36,0x36,0x36,0xf7,0x00,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0xff,0x00,0xf7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x00,0x00,0x00,0x00,0x00,0xff,0x00,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x36,0x36,0x36,0x36,0x36,0xf7,0x00,0xf7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x18,0x18,0x18,0x18,0x18,0xff,0x00,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0xff,0x00,0xff,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x3f,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x18,0x18,0x18,0x18,0x18,0x1f,0x18,0x1f,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x1f,0x18,0x1f,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xff,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, +0x18,0x18,0x18,0x18,0x18,0xff,0x18,0xff,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xf8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, +0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0, +0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f, +0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x76,0xdc,0xd8,0xd8,0xd8,0xdc,0x76,0x00,0x00,0x00,0x00, +0x00,0x00,0x78,0xcc,0xcc,0xcc,0xd8,0xcc,0xc6,0xc6,0xc6,0xcc,0x00,0x00,0x00,0x00, +0x00,0x00,0xfe,0xc6,0xc6,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0xfe,0x6c,0x6c,0x6c,0x6c,0x6c,0x6c,0x6c,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0xfe,0xc6,0x60,0x30,0x18,0x30,0x60,0xc6,0xfe,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x7e,0xd8,0xd8,0xd8,0xd8,0xd8,0x70,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x7c,0x60,0x60,0xc0,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x76,0xdc,0x18,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x7e,0x18,0x3c,0x66,0x66,0x66,0x3c,0x18,0x7e,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x38,0x6c,0xc6,0xc6,0xfe,0xc6,0xc6,0x6c,0x38,0x00,0x00,0x00,0x00, +0x00,0x00,0x38,0x6c,0xc6,0xc6,0xc6,0x6c,0x6c,0x6c,0x6c,0xee,0x00,0x00,0x00,0x00, +0x00,0x00,0x1e,0x30,0x18,0x0c,0x3e,0x66,0x66,0x66,0x66,0x3c,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x7e,0xdb,0xdb,0xdb,0x7e,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x03,0x06,0x7e,0xdb,0xdb,0xf3,0x7e,0x60,0xc0,0x00,0x00,0x00,0x00, +0x00,0x00,0x1c,0x30,0x60,0x60,0x7c,0x60,0x60,0x60,0x30,0x1c,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0xfe,0x00,0x00,0xfe,0x00,0x00,0xfe,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x18,0x18,0x7e,0x18,0x18,0x00,0x00,0xff,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x30,0x18,0x0c,0x06,0x0c,0x18,0x30,0x00,0x7e,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x0c,0x18,0x30,0x60,0x30,0x18,0x0c,0x00,0x7e,0x00,0x00,0x00,0x00, +0x00,0x00,0x0e,0x1b,0x1b,0x1b,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xd8,0xd8,0xd8,0x70,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x7e,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x76,0xdc,0x00,0x76,0xdc,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x38,0x6c,0x6c,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x0f,0x0c,0x0c,0x0c,0x0c,0x0c,0xec,0x6c,0x6c,0x3c,0x1c,0x00,0x00,0x00,0x00, +0x00,0xd8,0x6c,0x6c,0x6c,0x6c,0x6c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x70,0xd8,0x30,0x60,0xc8,0xf8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x7c,0x7c,0x7c,0x7c,0x7c,0x7c,0x7c,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +}; +static int default8x16FontMetaData[256*5+1]={ +0,8,16,0,0,16,8,16,0,0,32,8,16,0,0,48,8,16,0,0,64,8,16,0,0,80,8,16,0,0,96,8,16,0,0,112,8,16,0,0,128,8,16,0,0,144,8,16,0,0,160,8,16,0,0,176,8,16,0,0,192,8,16,0,0,208,8,16,0,0,224,8,16,0,0,240,8,16,0,0,256,8,16,0,0,272,8,16,0,0,288,8,16,0,0,304,8,16,0,0,320,8,16,0,0,336,8,16,0,0,352,8,16,0,0,368,8,16,0,0,384,8,16,0,0,400,8,16,0,0,416,8,16,0,0,432,8,16,0,0,448,8,16,0,0,464,8,16,0,0,480,8,16,0,0,496,8,16,0,0,512,8,16,0,0,528,8,16,0,0,544,8,16,0,0,560,8,16,0,0,576,8,16,0,0,592,8,16,0,0,608,8,16,0,0,624,8,16,0,0,640,8,16,0,0,656,8,16,0,0,672,8,16,0,0,688,8,16,0,0,704,8,16,0,0,720,8,16,0,0,736,8,16,0,0,752,8,16,0,0,768,8,16,0,0,784,8,16,0,0,800,8,16,0,0,816,8,16,0,0,832,8,16,0,0,848,8,16,0,0,864,8,16,0,0,880,8,16,0,0,896,8,16,0,0,912,8,16,0,0,928,8,16,0,0,944,8,16,0,0,960,8,16,0,0,976,8,16,0,0,992,8,16,0,0,1008,8,16,0,0,1024,8,16,0,0,1040,8,16,0,0,1056,8,16,0,0,1072,8,16,0,0,1088,8,16,0,0,1104,8,16,0,0,1120,8,16,0,0,1136,8,16,0,0,1152,8,16,0,0,1168,8,16,0,0,1184,8,16,0,0,1200,8,16,0,0,1216,8,16,0,0,1232,8,16,0,0,1248,8,16,0,0,1264,8,16,0,0,1280,8,16,0,0,1296,8,16,0,0,1312,8,16,0,0,1328,8,16,0,0,1344,8,16,0,0,1360,8,16,0,0,1376,8,16,0,0,1392,8,16,0,0,1408,8,16,0,0,1424,8,16,0,0,1440,8,16,0,0,1456,8,16,0,0,1472,8,16,0,0,1488,8,16,0,0,1504,8,16,0,0,1520,8,16,0,0,1536,8,16,0,0,1552,8,16,0,0,1568,8,16,0,0,1584,8,16,0,0,1600,8,16,0,0,1616,8,16,0,0,1632,8,16,0,0,1648,8,16,0,0,1664,8,16,0,0,1680,8,16,0,0,1696,8,16,0,0,1712,8,16,0,0,1728,8,16,0,0,1744,8,16,0,0,1760,8,16,0,0,1776,8,16,0,0,1792,8,16,0,0,1808,8,16,0,0,1824,8,16,0,0,1840,8,16,0,0,1856,8,16,0,0,1872,8,16,0,0,1888,8,16,0,0,1904,8,16,0,0,1920,8,16,0,0,1936,8,16,0,0,1952,8,16,0,0,1968,8,16,0,0,1984,8,16,0,0,2000,8,16,0,0,2016,8,16,0,0,2032,8,16,0,0,2048,8,16,0,0,2064,8,16,0,0,2080,8,16,0,0,2096,8,16,0,0,2112,8,16,0,0,2128,8,16,0,0,2144,8,16,0,0,2160,8,16,0,0,2176,8,16,0,0,2192,8,16,0,0,2208,8,16,0,0,2224,8,16,0,0,2240,8,16,0,0,2256,8,16,0,0,2272,8,16,0,0,2288,8,16,0,0,2304,8,16,0,0,2320,8,16,0,0,2336,8,16,0,0,2352,8,16,0,0,2368,8,16,0,0,2384,8,16,0,0,2400,8,16,0,0,2416,8,16,0,0,2432,8,16,0,0,2448,8,16,0,0,2464,8,16,0,0,2480,8,16,0,0,2496,8,16,0,0,2512,8,16,0,0,2528,8,16,0,0,2544,8,16,0,0,2560,8,16,0,0,2576,8,16,0,0,2592,8,16,0,0,2608,8,16,0,0,2624,8,16,0,0,2640,8,16,0,0,2656,8,16,0,0,2672,8,16,0,0,2688,8,16,0,0,2704,8,16,0,0,2720,8,16,0,0,2736,8,16,0,0,2752,8,16,0,0,2768,8,16,0,0,2784,8,16,0,0,2800,8,16,0,0,2816,8,16,0,0,2832,8,16,0,0,2848,8,16,0,0,2864,8,16,0,0,2880,8,16,0,0,2896,8,16,0,0,2912,8,16,0,0,2928,8,16,0,0,2944,8,16,0,0,2960,8,16,0,0,2976,8,16,0,0,2992,8,16,0,0,3008,8,16,0,0,3024,8,16,0,0,3040,8,16,0,0,3056,8,16,0,0,3072,8,16,0,0,3088,8,16,0,0,3104,8,16,0,0,3120,8,16,0,0,3136,8,16,0,0,3152,8,16,0,0,3168,8,16,0,0,3184,8,16,0,0,3200,8,16,0,0,3216,8,16,0,0,3232,8,16,0,0,3248,8,16,0,0,3264,8,16,0,0,3280,8,16,0,0,3296,8,16,0,0,3312,8,16,0,0,3328,8,16,0,0,3344,8,16,0,0,3360,8,16,0,0,3376,8,16,0,0,3392,8,16,0,0,3408,8,16,0,0,3424,8,16,0,0,3440,8,16,0,0,3456,8,16,0,0,3472,8,16,0,0,3488,8,16,0,0,3504,8,16,0,0,3520,8,16,0,0,3536,8,16,0,0,3552,8,16,0,0,3568,8,16,0,0,3584,8,16,0,0,3600,8,16,0,0,3616,8,16,0,0,3632,8,16,0,0,3648,8,16,0,0,3664,8,16,0,0,3680,8,16,0,0,3696,8,16,0,0,3712,8,16,0,0,3728,8,16,0,0,3744,8,16,0,0,3760,8,16,0,0,3776,8,16,0,0,3792,8,16,0,0,3808,8,16,0,0,3824,8,16,0,0,3840,8,16,0,0,3856,8,16,0,0,3872,8,16,0,0,3888,8,16,0,0,3904,8,16,0,0,3920,8,16,0,0,3936,8,16,0,0,3952,8,16,0,0,3968,8,16,0,0,3984,8,16,0,0,4000,8,16,0,0,4016,8,16,0,0,4032,8,16,0,0,4048,8,16,0,0,4064,8,16,0,0,4080,8,16,0,0,}; +static rfbFontData default8x16Font = { default8x16FontData, default8x16FontMetaData }; diff --git a/jni/vnc/LibVNCServer-0.9.9/rfb/keysym.h b/jni/vnc/LibVNCServer-0.9.9/rfb/keysym.h new file mode 100644 index 0000000..219f95b --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/rfb/keysym.h @@ -0,0 +1,1638 @@ +#ifndef XK_0 + +/* $XConsortium: keysym.h,v 1.15 94/04/17 20:10:55 rws Exp $ */ + +/*********************************************************** + +Copyright (c) 1987 X Consortium + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of the X Consortium shall not be +used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization from the X Consortium. + + +Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts. + + All Rights Reserved + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and that +both that copyright notice and this permission notice appear in +supporting documentation, and that the name of Digital not be +used in advertising or publicity pertaining to distribution of the +software without specific, written prior permission. + +DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING +ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL +DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR +ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +SOFTWARE. + +******************************************************************/ + +/* default keysyms */ +#define XK_MISCELLANY +#define XK_XKB_KEYS +#define XK_LATIN1 +#define XK_LATIN2 +#define XK_LATIN3 +#define XK_LATIN4 +#define XK_GREEK + +/* $TOG: keysymdef.h /main/25 1997/06/21 10:54:51 kaleb $ */ + +/*********************************************************** +Copyright (c) 1987, 1994 X Consortium + +Permission is hereby granted, free of charge, to any person obtaining +a copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice shall be included +in all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR +OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of the X Consortium shall +not be used in advertising or otherwise to promote the sale, use or +other dealings in this Software without prior written authorization +from the X Consortium. + + +Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts + + All Rights Reserved + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and that +both that copyright notice and this permission notice appear in +supporting documentation, and that the name of Digital not be +used in advertising or publicity pertaining to distribution of the +software without specific, written prior permission. + +DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING +ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL +DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR +ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +SOFTWARE. + +******************************************************************/ + +#define XK_VoidSymbol 0xFFFFFF /* void symbol */ + +#ifdef XK_MISCELLANY +/* + * TTY Functions, cleverly chosen to map to ascii, for convenience of + * programming, but could have been arbitrary (at the cost of lookup + * tables in client code. + */ + +#define XK_BackSpace 0xFF08 /* back space, back char */ +#define XK_Tab 0xFF09 +#define XK_Linefeed 0xFF0A /* Linefeed, LF */ +#define XK_Clear 0xFF0B +#define XK_Return 0xFF0D /* Return, enter */ +#define XK_Pause 0xFF13 /* Pause, hold */ +#define XK_Scroll_Lock 0xFF14 +#define XK_Sys_Req 0xFF15 +#define XK_Escape 0xFF1B +#define XK_Delete 0xFFFF /* Delete, rubout */ + + + +/* International & multi-key character composition */ + +#define XK_Multi_key 0xFF20 /* Multi-key character compose */ +#define XK_SingleCandidate 0xFF3C +#define XK_MultipleCandidate 0xFF3D +#define XK_PreviousCandidate 0xFF3E + +/* Japanese keyboard support */ + +#define XK_Kanji 0xFF21 /* Kanji, Kanji convert */ +#define XK_Muhenkan 0xFF22 /* Cancel Conversion */ +#define XK_Henkan_Mode 0xFF23 /* Start/Stop Conversion */ +#define XK_Henkan 0xFF23 /* Alias for Henkan_Mode */ +#define XK_Romaji 0xFF24 /* to Romaji */ +#define XK_Hiragana 0xFF25 /* to Hiragana */ +#define XK_Katakana 0xFF26 /* to Katakana */ +#define XK_Hiragana_Katakana 0xFF27 /* Hiragana/Katakana toggle */ +#define XK_Zenkaku 0xFF28 /* to Zenkaku */ +#define XK_Hankaku 0xFF29 /* to Hankaku */ +#define XK_Zenkaku_Hankaku 0xFF2A /* Zenkaku/Hankaku toggle */ +#define XK_Touroku 0xFF2B /* Add to Dictionary */ +#define XK_Massyo 0xFF2C /* Delete from Dictionary */ +#define XK_Kana_Lock 0xFF2D /* Kana Lock */ +#define XK_Kana_Shift 0xFF2E /* Kana Shift */ +#define XK_Eisu_Shift 0xFF2F /* Alphanumeric Shift */ +#define XK_Eisu_toggle 0xFF30 /* Alphanumeric toggle */ +#define XK_Zen_Koho 0xFF3D /* Multiple/All Candidate(s) */ +#define XK_Mae_Koho 0xFF3E /* Previous Candidate */ + +/* 0xFF31 thru 0xFF3F are under XK_KOREAN */ + +/* Cursor control & motion */ + +#define XK_Home 0xFF50 +#define XK_Left 0xFF51 /* Move left, left arrow */ +#define XK_Up 0xFF52 /* Move up, up arrow */ +#define XK_Right 0xFF53 /* Move right, right arrow */ +#define XK_Down 0xFF54 /* Move down, down arrow */ +#define XK_Prior 0xFF55 /* Prior, previous */ +#define XK_Page_Up 0xFF55 +#define XK_Next 0xFF56 /* Next */ +#define XK_Page_Down 0xFF56 +#define XK_End 0xFF57 /* EOL */ +#define XK_Begin 0xFF58 /* BOL */ + + +/* Misc Functions */ + +#define XK_Select 0xFF60 /* Select, mark */ +#define XK_Print 0xFF61 +#define XK_Execute 0xFF62 /* Execute, run, do */ +#define XK_Insert 0xFF63 /* Insert, insert here */ +#define XK_Undo 0xFF65 /* Undo, oops */ +#define XK_Redo 0xFF66 /* redo, again */ +#define XK_Menu 0xFF67 +#define XK_Find 0xFF68 /* Find, search */ +#define XK_Cancel 0xFF69 /* Cancel, stop, abort, exit */ +#define XK_Help 0xFF6A /* Help */ +#define XK_Break 0xFF6B +#define XK_Mode_switch 0xFF7E /* Character set switch */ +#define XK_script_switch 0xFF7E /* Alias for mode_switch */ +#define XK_Num_Lock 0xFF7F + +/* Keypad Functions, keypad numbers cleverly chosen to map to ascii */ + +#define XK_KP_Space 0xFF80 /* space */ +#define XK_KP_Tab 0xFF89 +#define XK_KP_Enter 0xFF8D /* enter */ +#define XK_KP_F1 0xFF91 /* PF1, KP_A, ... */ +#define XK_KP_F2 0xFF92 +#define XK_KP_F3 0xFF93 +#define XK_KP_F4 0xFF94 +#define XK_KP_Home 0xFF95 +#define XK_KP_Left 0xFF96 +#define XK_KP_Up 0xFF97 +#define XK_KP_Right 0xFF98 +#define XK_KP_Down 0xFF99 +#define XK_KP_Prior 0xFF9A +#define XK_KP_Page_Up 0xFF9A +#define XK_KP_Next 0xFF9B +#define XK_KP_Page_Down 0xFF9B +#define XK_KP_End 0xFF9C +#define XK_KP_Begin 0xFF9D +#define XK_KP_Insert 0xFF9E +#define XK_KP_Delete 0xFF9F +#define XK_KP_Equal 0xFFBD /* equals */ +#define XK_KP_Multiply 0xFFAA +#define XK_KP_Add 0xFFAB +#define XK_KP_Separator 0xFFAC /* separator, often comma */ +#define XK_KP_Subtract 0xFFAD +#define XK_KP_Decimal 0xFFAE +#define XK_KP_Divide 0xFFAF + +#define XK_KP_0 0xFFB0 +#define XK_KP_1 0xFFB1 +#define XK_KP_2 0xFFB2 +#define XK_KP_3 0xFFB3 +#define XK_KP_4 0xFFB4 +#define XK_KP_5 0xFFB5 +#define XK_KP_6 0xFFB6 +#define XK_KP_7 0xFFB7 +#define XK_KP_8 0xFFB8 +#define XK_KP_9 0xFFB9 + + + +/* + * Auxilliary Functions; note the duplicate definitions for left and right + * function keys; Sun keyboards and a few other manufactures have such + * function key groups on the left and/or right sides of the keyboard. + * We've not found a keyboard with more than 35 function keys total. + */ + +#define XK_F1 0xFFBE +#define XK_F2 0xFFBF +#define XK_F3 0xFFC0 +#define XK_F4 0xFFC1 +#define XK_F5 0xFFC2 +#define XK_F6 0xFFC3 +#define XK_F7 0xFFC4 +#define XK_F8 0xFFC5 +#define XK_F9 0xFFC6 +#define XK_F10 0xFFC7 +#define XK_F11 0xFFC8 +#define XK_L1 0xFFC8 +#define XK_F12 0xFFC9 +#define XK_L2 0xFFC9 +#define XK_F13 0xFFCA +#define XK_L3 0xFFCA +#define XK_F14 0xFFCB +#define XK_L4 0xFFCB +#define XK_F15 0xFFCC +#define XK_L5 0xFFCC +#define XK_F16 0xFFCD +#define XK_L6 0xFFCD +#define XK_F17 0xFFCE +#define XK_L7 0xFFCE +#define XK_F18 0xFFCF +#define XK_L8 0xFFCF +#define XK_F19 0xFFD0 +#define XK_L9 0xFFD0 +#define XK_F20 0xFFD1 +#define XK_L10 0xFFD1 +#define XK_F21 0xFFD2 +#define XK_R1 0xFFD2 +#define XK_F22 0xFFD3 +#define XK_R2 0xFFD3 +#define XK_F23 0xFFD4 +#define XK_R3 0xFFD4 +#define XK_F24 0xFFD5 +#define XK_R4 0xFFD5 +#define XK_F25 0xFFD6 +#define XK_R5 0xFFD6 +#define XK_F26 0xFFD7 +#define XK_R6 0xFFD7 +#define XK_F27 0xFFD8 +#define XK_R7 0xFFD8 +#define XK_F28 0xFFD9 +#define XK_R8 0xFFD9 +#define XK_F29 0xFFDA +#define XK_R9 0xFFDA +#define XK_F30 0xFFDB +#define XK_R10 0xFFDB +#define XK_F31 0xFFDC +#define XK_R11 0xFFDC +#define XK_F32 0xFFDD +#define XK_R12 0xFFDD +#define XK_F33 0xFFDE +#define XK_R13 0xFFDE +#define XK_F34 0xFFDF +#define XK_R14 0xFFDF +#define XK_F35 0xFFE0 +#define XK_R15 0xFFE0 + +/* Modifiers */ + +#define XK_Shift_L 0xFFE1 /* Left shift */ +#define XK_Shift_R 0xFFE2 /* Right shift */ +#define XK_Control_L 0xFFE3 /* Left control */ +#define XK_Control_R 0xFFE4 /* Right control */ +#define XK_Caps_Lock 0xFFE5 /* Caps lock */ +#define XK_Shift_Lock 0xFFE6 /* Shift lock */ + +#define XK_Meta_L 0xFFE7 /* Left meta */ +#define XK_Meta_R 0xFFE8 /* Right meta */ +#define XK_Alt_L 0xFFE9 /* Left alt */ +#define XK_Alt_R 0xFFEA /* Right alt */ +#define XK_Super_L 0xFFEB /* Left super */ +#define XK_Super_R 0xFFEC /* Right super */ +#define XK_Hyper_L 0xFFED /* Left hyper */ +#define XK_Hyper_R 0xFFEE /* Right hyper */ +#endif /* XK_MISCELLANY */ + +/* + * ISO 9995 Function and Modifier Keys + * Byte 3 = 0xFE + */ + +#ifdef XK_XKB_KEYS +#define XK_ISO_Lock 0xFE01 +#define XK_ISO_Level2_Latch 0xFE02 +#define XK_ISO_Level3_Shift 0xFE03 +#define XK_ISO_Level3_Latch 0xFE04 +#define XK_ISO_Level3_Lock 0xFE05 +#define XK_ISO_Group_Shift 0xFF7E /* Alias for mode_switch */ +#define XK_ISO_Group_Latch 0xFE06 +#define XK_ISO_Group_Lock 0xFE07 +#define XK_ISO_Next_Group 0xFE08 +#define XK_ISO_Next_Group_Lock 0xFE09 +#define XK_ISO_Prev_Group 0xFE0A +#define XK_ISO_Prev_Group_Lock 0xFE0B +#define XK_ISO_First_Group 0xFE0C +#define XK_ISO_First_Group_Lock 0xFE0D +#define XK_ISO_Last_Group 0xFE0E +#define XK_ISO_Last_Group_Lock 0xFE0F + +#define XK_ISO_Left_Tab 0xFE20 +#define XK_ISO_Move_Line_Up 0xFE21 +#define XK_ISO_Move_Line_Down 0xFE22 +#define XK_ISO_Partial_Line_Up 0xFE23 +#define XK_ISO_Partial_Line_Down 0xFE24 +#define XK_ISO_Partial_Space_Left 0xFE25 +#define XK_ISO_Partial_Space_Right 0xFE26 +#define XK_ISO_Set_Margin_Left 0xFE27 +#define XK_ISO_Set_Margin_Right 0xFE28 +#define XK_ISO_Release_Margin_Left 0xFE29 +#define XK_ISO_Release_Margin_Right 0xFE2A +#define XK_ISO_Release_Both_Margins 0xFE2B +#define XK_ISO_Fast_Cursor_Left 0xFE2C +#define XK_ISO_Fast_Cursor_Right 0xFE2D +#define XK_ISO_Fast_Cursor_Up 0xFE2E +#define XK_ISO_Fast_Cursor_Down 0xFE2F +#define XK_ISO_Continuous_Underline 0xFE30 +#define XK_ISO_Discontinuous_Underline 0xFE31 +#define XK_ISO_Emphasize 0xFE32 +#define XK_ISO_Center_Object 0xFE33 +#define XK_ISO_Enter 0xFE34 + +#define XK_dead_grave 0xFE50 +#define XK_dead_acute 0xFE51 +#define XK_dead_circumflex 0xFE52 +#define XK_dead_tilde 0xFE53 +#define XK_dead_macron 0xFE54 +#define XK_dead_breve 0xFE55 +#define XK_dead_abovedot 0xFE56 +#define XK_dead_diaeresis 0xFE57 +#define XK_dead_abovering 0xFE58 +#define XK_dead_doubleacute 0xFE59 +#define XK_dead_caron 0xFE5A +#define XK_dead_cedilla 0xFE5B +#define XK_dead_ogonek 0xFE5C +#define XK_dead_iota 0xFE5D +#define XK_dead_voiced_sound 0xFE5E +#define XK_dead_semivoiced_sound 0xFE5F +#define XK_dead_belowdot 0xFE60 + +#define XK_First_Virtual_Screen 0xFED0 +#define XK_Prev_Virtual_Screen 0xFED1 +#define XK_Next_Virtual_Screen 0xFED2 +#define XK_Last_Virtual_Screen 0xFED4 +#define XK_Terminate_Server 0xFED5 + +#define XK_AccessX_Enable 0xFE70 +#define XK_AccessX_Feedback_Enable 0xFE71 +#define XK_RepeatKeys_Enable 0xFE72 +#define XK_SlowKeys_Enable 0xFE73 +#define XK_BounceKeys_Enable 0xFE74 +#define XK_StickyKeys_Enable 0xFE75 +#define XK_MouseKeys_Enable 0xFE76 +#define XK_MouseKeys_Accel_Enable 0xFE77 +#define XK_Overlay1_Enable 0xFE78 +#define XK_Overlay2_Enable 0xFE79 +#define XK_AudibleBell_Enable 0xFE7A + +#define XK_Pointer_Left 0xFEE0 +#define XK_Pointer_Right 0xFEE1 +#define XK_Pointer_Up 0xFEE2 +#define XK_Pointer_Down 0xFEE3 +#define XK_Pointer_UpLeft 0xFEE4 +#define XK_Pointer_UpRight 0xFEE5 +#define XK_Pointer_DownLeft 0xFEE6 +#define XK_Pointer_DownRight 0xFEE7 +#define XK_Pointer_Button_Dflt 0xFEE8 +#define XK_Pointer_Button1 0xFEE9 +#define XK_Pointer_Button2 0xFEEA +#define XK_Pointer_Button3 0xFEEB +#define XK_Pointer_Button4 0xFEEC +#define XK_Pointer_Button5 0xFEED +#define XK_Pointer_DblClick_Dflt 0xFEEE +#define XK_Pointer_DblClick1 0xFEEF +#define XK_Pointer_DblClick2 0xFEF0 +#define XK_Pointer_DblClick3 0xFEF1 +#define XK_Pointer_DblClick4 0xFEF2 +#define XK_Pointer_DblClick5 0xFEF3 +#define XK_Pointer_Drag_Dflt 0xFEF4 +#define XK_Pointer_Drag1 0xFEF5 +#define XK_Pointer_Drag2 0xFEF6 +#define XK_Pointer_Drag3 0xFEF7 +#define XK_Pointer_Drag4 0xFEF8 +#define XK_Pointer_Drag5 0xFEFD + +#define XK_Pointer_EnableKeys 0xFEF9 +#define XK_Pointer_Accelerate 0xFEFA +#define XK_Pointer_DfltBtnNext 0xFEFB +#define XK_Pointer_DfltBtnPrev 0xFEFC + +#endif + +/* + * 3270 Terminal Keys + * Byte 3 = 0xFD + */ + +#ifdef XK_3270 +#define XK_3270_Duplicate 0xFD01 +#define XK_3270_FieldMark 0xFD02 +#define XK_3270_Right2 0xFD03 +#define XK_3270_Left2 0xFD04 +#define XK_3270_BackTab 0xFD05 +#define XK_3270_EraseEOF 0xFD06 +#define XK_3270_EraseInput 0xFD07 +#define XK_3270_Reset 0xFD08 +#define XK_3270_Quit 0xFD09 +#define XK_3270_PA1 0xFD0A +#define XK_3270_PA2 0xFD0B +#define XK_3270_PA3 0xFD0C +#define XK_3270_Test 0xFD0D +#define XK_3270_Attn 0xFD0E +#define XK_3270_CursorBlink 0xFD0F +#define XK_3270_AltCursor 0xFD10 +#define XK_3270_KeyClick 0xFD11 +#define XK_3270_Jump 0xFD12 +#define XK_3270_Ident 0xFD13 +#define XK_3270_Rule 0xFD14 +#define XK_3270_Copy 0xFD15 +#define XK_3270_Play 0xFD16 +#define XK_3270_Setup 0xFD17 +#define XK_3270_Record 0xFD18 +#define XK_3270_ChangeScreen 0xFD19 +#define XK_3270_DeleteWord 0xFD1A +#define XK_3270_ExSelect 0xFD1B +#define XK_3270_CursorSelect 0xFD1C +#define XK_3270_PrintScreen 0xFD1D +#define XK_3270_Enter 0xFD1E +#endif + +/* + * Latin 1 + * Byte 3 = 0 + */ +#ifdef XK_LATIN1 +#define XK_space 0x020 +#define XK_exclam 0x021 +#define XK_quotedbl 0x022 +#define XK_numbersign 0x023 +#define XK_dollar 0x024 +#define XK_percent 0x025 +#define XK_ampersand 0x026 +#define XK_apostrophe 0x027 +#define XK_quoteright 0x027 /* deprecated */ +#define XK_parenleft 0x028 +#define XK_parenright 0x029 +#define XK_asterisk 0x02a +#define XK_plus 0x02b +#define XK_comma 0x02c +#define XK_minus 0x02d +#define XK_period 0x02e +#define XK_slash 0x02f +#define XK_0 0x030 +#define XK_1 0x031 +#define XK_2 0x032 +#define XK_3 0x033 +#define XK_4 0x034 +#define XK_5 0x035 +#define XK_6 0x036 +#define XK_7 0x037 +#define XK_8 0x038 +#define XK_9 0x039 +#define XK_colon 0x03a +#define XK_semicolon 0x03b +#define XK_less 0x03c +#define XK_equal 0x03d +#define XK_greater 0x03e +#define XK_question 0x03f +#define XK_at 0x040 +#define XK_A 0x041 +#define XK_B 0x042 +#define XK_C 0x043 +#define XK_D 0x044 +#define XK_E 0x045 +#define XK_F 0x046 +#define XK_G 0x047 +#define XK_H 0x048 +#define XK_I 0x049 +#define XK_J 0x04a +#define XK_K 0x04b +#define XK_L 0x04c +#define XK_M 0x04d +#define XK_N 0x04e +#define XK_O 0x04f +#define XK_P 0x050 +#define XK_Q 0x051 +#define XK_R 0x052 +#define XK_S 0x053 +#define XK_T 0x054 +#define XK_U 0x055 +#define XK_V 0x056 +#define XK_W 0x057 +#define XK_X 0x058 +#define XK_Y 0x059 +#define XK_Z 0x05a +#define XK_bracketleft 0x05b +#define XK_backslash 0x05c +#define XK_bracketright 0x05d +#define XK_asciicircum 0x05e +#define XK_underscore 0x05f +#define XK_grave 0x060 +#define XK_quoteleft 0x060 /* deprecated */ +#define XK_a 0x061 +#define XK_b 0x062 +#define XK_c 0x063 +#define XK_d 0x064 +#define XK_e 0x065 +#define XK_f 0x066 +#define XK_g 0x067 +#define XK_h 0x068 +#define XK_i 0x069 +#define XK_j 0x06a +#define XK_k 0x06b +#define XK_l 0x06c +#define XK_m 0x06d +#define XK_n 0x06e +#define XK_o 0x06f +#define XK_p 0x070 +#define XK_q 0x071 +#define XK_r 0x072 +#define XK_s 0x073 +#define XK_t 0x074 +#define XK_u 0x075 +#define XK_v 0x076 +#define XK_w 0x077 +#define XK_x 0x078 +#define XK_y 0x079 +#define XK_z 0x07a +#define XK_braceleft 0x07b +#define XK_bar 0x07c +#define XK_braceright 0x07d +#define XK_asciitilde 0x07e + +#define XK_nobreakspace 0x0a0 +#define XK_exclamdown 0x0a1 +#define XK_cent 0x0a2 +#define XK_sterling 0x0a3 +#define XK_currency 0x0a4 +#define XK_yen 0x0a5 +#define XK_brokenbar 0x0a6 +#define XK_section 0x0a7 +#define XK_diaeresis 0x0a8 +#define XK_copyright 0x0a9 +#define XK_ordfeminine 0x0aa +#define XK_guillemotleft 0x0ab /* left angle quotation mark */ +#define XK_notsign 0x0ac +#define XK_hyphen 0x0ad +#define XK_registered 0x0ae +#define XK_macron 0x0af +#define XK_degree 0x0b0 +#define XK_plusminus 0x0b1 +#define XK_twosuperior 0x0b2 +#define XK_threesuperior 0x0b3 +#define XK_acute 0x0b4 +#define XK_mu 0x0b5 +#define XK_paragraph 0x0b6 +#define XK_periodcentered 0x0b7 +#define XK_cedilla 0x0b8 +#define XK_onesuperior 0x0b9 +#define XK_masculine 0x0ba +#define XK_guillemotright 0x0bb /* right angle quotation mark */ +#define XK_onequarter 0x0bc +#define XK_onehalf 0x0bd +#define XK_threequarters 0x0be +#define XK_questiondown 0x0bf +#define XK_Agrave 0x0c0 +#define XK_Aacute 0x0c1 +#define XK_Acircumflex 0x0c2 +#define XK_Atilde 0x0c3 +#define XK_Adiaeresis 0x0c4 +#define XK_Aring 0x0c5 +#define XK_AE 0x0c6 +#define XK_Ccedilla 0x0c7 +#define XK_Egrave 0x0c8 +#define XK_Eacute 0x0c9 +#define XK_Ecircumflex 0x0ca +#define XK_Ediaeresis 0x0cb +#define XK_Igrave 0x0cc +#define XK_Iacute 0x0cd +#define XK_Icircumflex 0x0ce +#define XK_Idiaeresis 0x0cf +#define XK_ETH 0x0d0 +#define XK_Eth 0x0d0 /* deprecated */ +#define XK_Ntilde 0x0d1 +#define XK_Ograve 0x0d2 +#define XK_Oacute 0x0d3 +#define XK_Ocircumflex 0x0d4 +#define XK_Otilde 0x0d5 +#define XK_Odiaeresis 0x0d6 +#define XK_multiply 0x0d7 +#define XK_Ooblique 0x0d8 +#define XK_Ugrave 0x0d9 +#define XK_Uacute 0x0da +#define XK_Ucircumflex 0x0db +#define XK_Udiaeresis 0x0dc +#define XK_Yacute 0x0dd +#define XK_THORN 0x0de +#define XK_Thorn 0x0de /* deprecated */ +#define XK_ssharp 0x0df +#define XK_agrave 0x0e0 +#define XK_aacute 0x0e1 +#define XK_acircumflex 0x0e2 +#define XK_atilde 0x0e3 +#define XK_adiaeresis 0x0e4 +#define XK_aring 0x0e5 +#define XK_ae 0x0e6 +#define XK_ccedilla 0x0e7 +#define XK_egrave 0x0e8 +#define XK_eacute 0x0e9 +#define XK_ecircumflex 0x0ea +#define XK_ediaeresis 0x0eb +#define XK_igrave 0x0ec +#define XK_iacute 0x0ed +#define XK_icircumflex 0x0ee +#define XK_idiaeresis 0x0ef +#define XK_eth 0x0f0 +#define XK_ntilde 0x0f1 +#define XK_ograve 0x0f2 +#define XK_oacute 0x0f3 +#define XK_ocircumflex 0x0f4 +#define XK_otilde 0x0f5 +#define XK_odiaeresis 0x0f6 +#define XK_division 0x0f7 +#define XK_oslash 0x0f8 +#define XK_ugrave 0x0f9 +#define XK_uacute 0x0fa +#define XK_ucircumflex 0x0fb +#define XK_udiaeresis 0x0fc +#define XK_yacute 0x0fd +#define XK_thorn 0x0fe +#define XK_ydiaeresis 0x0ff +#endif /* XK_LATIN1 */ + +/* + * Latin 2 + * Byte 3 = 1 + */ + +#ifdef XK_LATIN2 +#define XK_Aogonek 0x1a1 +#define XK_breve 0x1a2 +#define XK_Lstroke 0x1a3 +#define XK_Lcaron 0x1a5 +#define XK_Sacute 0x1a6 +#define XK_Scaron 0x1a9 +#define XK_Scedilla 0x1aa +#define XK_Tcaron 0x1ab +#define XK_Zacute 0x1ac +#define XK_Zcaron 0x1ae +#define XK_Zabovedot 0x1af +#define XK_aogonek 0x1b1 +#define XK_ogonek 0x1b2 +#define XK_lstroke 0x1b3 +#define XK_lcaron 0x1b5 +#define XK_sacute 0x1b6 +#define XK_caron 0x1b7 +#define XK_scaron 0x1b9 +#define XK_scedilla 0x1ba +#define XK_tcaron 0x1bb +#define XK_zacute 0x1bc +#define XK_doubleacute 0x1bd +#define XK_zcaron 0x1be +#define XK_zabovedot 0x1bf +#define XK_Racute 0x1c0 +#define XK_Abreve 0x1c3 +#define XK_Lacute 0x1c5 +#define XK_Cacute 0x1c6 +#define XK_Ccaron 0x1c8 +#define XK_Eogonek 0x1ca +#define XK_Ecaron 0x1cc +#define XK_Dcaron 0x1cf +#define XK_Dstroke 0x1d0 +#define XK_Nacute 0x1d1 +#define XK_Ncaron 0x1d2 +#define XK_Odoubleacute 0x1d5 +#define XK_Rcaron 0x1d8 +#define XK_Uring 0x1d9 +#define XK_Udoubleacute 0x1db +#define XK_Tcedilla 0x1de +#define XK_racute 0x1e0 +#define XK_abreve 0x1e3 +#define XK_lacute 0x1e5 +#define XK_cacute 0x1e6 +#define XK_ccaron 0x1e8 +#define XK_eogonek 0x1ea +#define XK_ecaron 0x1ec +#define XK_dcaron 0x1ef +#define XK_dstroke 0x1f0 +#define XK_nacute 0x1f1 +#define XK_ncaron 0x1f2 +#define XK_odoubleacute 0x1f5 +#define XK_udoubleacute 0x1fb +#define XK_rcaron 0x1f8 +#define XK_uring 0x1f9 +#define XK_tcedilla 0x1fe +#define XK_abovedot 0x1ff +#endif /* XK_LATIN2 */ + +/* + * Latin 3 + * Byte 3 = 2 + */ + +#ifdef XK_LATIN3 +#define XK_Hstroke 0x2a1 +#define XK_Hcircumflex 0x2a6 +#define XK_Iabovedot 0x2a9 +#define XK_Gbreve 0x2ab +#define XK_Jcircumflex 0x2ac +#define XK_hstroke 0x2b1 +#define XK_hcircumflex 0x2b6 +#define XK_idotless 0x2b9 +#define XK_gbreve 0x2bb +#define XK_jcircumflex 0x2bc +#define XK_Cabovedot 0x2c5 +#define XK_Ccircumflex 0x2c6 +#define XK_Gabovedot 0x2d5 +#define XK_Gcircumflex 0x2d8 +#define XK_Ubreve 0x2dd +#define XK_Scircumflex 0x2de +#define XK_cabovedot 0x2e5 +#define XK_ccircumflex 0x2e6 +#define XK_gabovedot 0x2f5 +#define XK_gcircumflex 0x2f8 +#define XK_ubreve 0x2fd +#define XK_scircumflex 0x2fe +#endif /* XK_LATIN3 */ + + +/* + * Latin 4 + * Byte 3 = 3 + */ + +#ifdef XK_LATIN4 +#define XK_kra 0x3a2 +#define XK_kappa 0x3a2 /* deprecated */ +#define XK_Rcedilla 0x3a3 +#define XK_Itilde 0x3a5 +#define XK_Lcedilla 0x3a6 +#define XK_Emacron 0x3aa +#define XK_Gcedilla 0x3ab +#define XK_Tslash 0x3ac +#define XK_rcedilla 0x3b3 +#define XK_itilde 0x3b5 +#define XK_lcedilla 0x3b6 +#define XK_emacron 0x3ba +#define XK_gcedilla 0x3bb +#define XK_tslash 0x3bc +#define XK_ENG 0x3bd +#define XK_eng 0x3bf +#define XK_Amacron 0x3c0 +#define XK_Iogonek 0x3c7 +#define XK_Eabovedot 0x3cc +#define XK_Imacron 0x3cf +#define XK_Ncedilla 0x3d1 +#define XK_Omacron 0x3d2 +#define XK_Kcedilla 0x3d3 +#define XK_Uogonek 0x3d9 +#define XK_Utilde 0x3dd +#define XK_Umacron 0x3de +#define XK_amacron 0x3e0 +#define XK_iogonek 0x3e7 +#define XK_eabovedot 0x3ec +#define XK_imacron 0x3ef +#define XK_ncedilla 0x3f1 +#define XK_omacron 0x3f2 +#define XK_kcedilla 0x3f3 +#define XK_uogonek 0x3f9 +#define XK_utilde 0x3fd +#define XK_umacron 0x3fe +#endif /* XK_LATIN4 */ + +/* + * Katakana + * Byte 3 = 4 + */ + +#ifdef XK_KATAKANA +#define XK_overline 0x47e +#define XK_kana_fullstop 0x4a1 +#define XK_kana_openingbracket 0x4a2 +#define XK_kana_closingbracket 0x4a3 +#define XK_kana_comma 0x4a4 +#define XK_kana_conjunctive 0x4a5 +#define XK_kana_middledot 0x4a5 /* deprecated */ +#define XK_kana_WO 0x4a6 +#define XK_kana_a 0x4a7 +#define XK_kana_i 0x4a8 +#define XK_kana_u 0x4a9 +#define XK_kana_e 0x4aa +#define XK_kana_o 0x4ab +#define XK_kana_ya 0x4ac +#define XK_kana_yu 0x4ad +#define XK_kana_yo 0x4ae +#define XK_kana_tsu 0x4af +#define XK_kana_tu 0x4af /* deprecated */ +#define XK_prolongedsound 0x4b0 +#define XK_kana_A 0x4b1 +#define XK_kana_I 0x4b2 +#define XK_kana_U 0x4b3 +#define XK_kana_E 0x4b4 +#define XK_kana_O 0x4b5 +#define XK_kana_KA 0x4b6 +#define XK_kana_KI 0x4b7 +#define XK_kana_KU 0x4b8 +#define XK_kana_KE 0x4b9 +#define XK_kana_KO 0x4ba +#define XK_kana_SA 0x4bb +#define XK_kana_SHI 0x4bc +#define XK_kana_SU 0x4bd +#define XK_kana_SE 0x4be +#define XK_kana_SO 0x4bf +#define XK_kana_TA 0x4c0 +#define XK_kana_CHI 0x4c1 +#define XK_kana_TI 0x4c1 /* deprecated */ +#define XK_kana_TSU 0x4c2 +#define XK_kana_TU 0x4c2 /* deprecated */ +#define XK_kana_TE 0x4c3 +#define XK_kana_TO 0x4c4 +#define XK_kana_NA 0x4c5 +#define XK_kana_NI 0x4c6 +#define XK_kana_NU 0x4c7 +#define XK_kana_NE 0x4c8 +#define XK_kana_NO 0x4c9 +#define XK_kana_HA 0x4ca +#define XK_kana_HI 0x4cb +#define XK_kana_FU 0x4cc +#define XK_kana_HU 0x4cc /* deprecated */ +#define XK_kana_HE 0x4cd +#define XK_kana_HO 0x4ce +#define XK_kana_MA 0x4cf +#define XK_kana_MI 0x4d0 +#define XK_kana_MU 0x4d1 +#define XK_kana_ME 0x4d2 +#define XK_kana_MO 0x4d3 +#define XK_kana_YA 0x4d4 +#define XK_kana_YU 0x4d5 +#define XK_kana_YO 0x4d6 +#define XK_kana_RA 0x4d7 +#define XK_kana_RI 0x4d8 +#define XK_kana_RU 0x4d9 +#define XK_kana_RE 0x4da +#define XK_kana_RO 0x4db +#define XK_kana_WA 0x4dc +#define XK_kana_N 0x4dd +#define XK_voicedsound 0x4de +#define XK_semivoicedsound 0x4df +#define XK_kana_switch 0xFF7E /* Alias for mode_switch */ +#endif /* XK_KATAKANA */ + +/* + * Arabic + * Byte 3 = 5 + */ + +#ifdef XK_ARABIC +#define XK_Arabic_comma 0x5ac +#define XK_Arabic_semicolon 0x5bb +#define XK_Arabic_question_mark 0x5bf +#define XK_Arabic_hamza 0x5c1 +#define XK_Arabic_maddaonalef 0x5c2 +#define XK_Arabic_hamzaonalef 0x5c3 +#define XK_Arabic_hamzaonwaw 0x5c4 +#define XK_Arabic_hamzaunderalef 0x5c5 +#define XK_Arabic_hamzaonyeh 0x5c6 +#define XK_Arabic_alef 0x5c7 +#define XK_Arabic_beh 0x5c8 +#define XK_Arabic_tehmarbuta 0x5c9 +#define XK_Arabic_teh 0x5ca +#define XK_Arabic_theh 0x5cb +#define XK_Arabic_jeem 0x5cc +#define XK_Arabic_hah 0x5cd +#define XK_Arabic_khah 0x5ce +#define XK_Arabic_dal 0x5cf +#define XK_Arabic_thal 0x5d0 +#define XK_Arabic_ra 0x5d1 +#define XK_Arabic_zain 0x5d2 +#define XK_Arabic_seen 0x5d3 +#define XK_Arabic_sheen 0x5d4 +#define XK_Arabic_sad 0x5d5 +#define XK_Arabic_dad 0x5d6 +#define XK_Arabic_tah 0x5d7 +#define XK_Arabic_zah 0x5d8 +#define XK_Arabic_ain 0x5d9 +#define XK_Arabic_ghain 0x5da +#define XK_Arabic_tatweel 0x5e0 +#define XK_Arabic_feh 0x5e1 +#define XK_Arabic_qaf 0x5e2 +#define XK_Arabic_kaf 0x5e3 +#define XK_Arabic_lam 0x5e4 +#define XK_Arabic_meem 0x5e5 +#define XK_Arabic_noon 0x5e6 +#define XK_Arabic_ha 0x5e7 +#define XK_Arabic_heh 0x5e7 /* deprecated */ +#define XK_Arabic_waw 0x5e8 +#define XK_Arabic_alefmaksura 0x5e9 +#define XK_Arabic_yeh 0x5ea +#define XK_Arabic_fathatan 0x5eb +#define XK_Arabic_dammatan 0x5ec +#define XK_Arabic_kasratan 0x5ed +#define XK_Arabic_fatha 0x5ee +#define XK_Arabic_damma 0x5ef +#define XK_Arabic_kasra 0x5f0 +#define XK_Arabic_shadda 0x5f1 +#define XK_Arabic_sukun 0x5f2 +#define XK_Arabic_switch 0xFF7E /* Alias for mode_switch */ +#endif /* XK_ARABIC */ + +/* + * Cyrillic + * Byte 3 = 6 + */ +#ifdef XK_CYRILLIC +#define XK_Serbian_dje 0x6a1 +#define XK_Macedonia_gje 0x6a2 +#define XK_Cyrillic_io 0x6a3 +#define XK_Ukrainian_ie 0x6a4 +#define XK_Ukranian_je 0x6a4 /* deprecated */ +#define XK_Macedonia_dse 0x6a5 +#define XK_Ukrainian_i 0x6a6 +#define XK_Ukranian_i 0x6a6 /* deprecated */ +#define XK_Ukrainian_yi 0x6a7 +#define XK_Ukranian_yi 0x6a7 /* deprecated */ +#define XK_Cyrillic_je 0x6a8 +#define XK_Serbian_je 0x6a8 /* deprecated */ +#define XK_Cyrillic_lje 0x6a9 +#define XK_Serbian_lje 0x6a9 /* deprecated */ +#define XK_Cyrillic_nje 0x6aa +#define XK_Serbian_nje 0x6aa /* deprecated */ +#define XK_Serbian_tshe 0x6ab +#define XK_Macedonia_kje 0x6ac +#define XK_Byelorussian_shortu 0x6ae +#define XK_Cyrillic_dzhe 0x6af +#define XK_Serbian_dze 0x6af /* deprecated */ +#define XK_numerosign 0x6b0 +#define XK_Serbian_DJE 0x6b1 +#define XK_Macedonia_GJE 0x6b2 +#define XK_Cyrillic_IO 0x6b3 +#define XK_Ukrainian_IE 0x6b4 +#define XK_Ukranian_JE 0x6b4 /* deprecated */ +#define XK_Macedonia_DSE 0x6b5 +#define XK_Ukrainian_I 0x6b6 +#define XK_Ukranian_I 0x6b6 /* deprecated */ +#define XK_Ukrainian_YI 0x6b7 +#define XK_Ukranian_YI 0x6b7 /* deprecated */ +#define XK_Cyrillic_JE 0x6b8 +#define XK_Serbian_JE 0x6b8 /* deprecated */ +#define XK_Cyrillic_LJE 0x6b9 +#define XK_Serbian_LJE 0x6b9 /* deprecated */ +#define XK_Cyrillic_NJE 0x6ba +#define XK_Serbian_NJE 0x6ba /* deprecated */ +#define XK_Serbian_TSHE 0x6bb +#define XK_Macedonia_KJE 0x6bc +#define XK_Byelorussian_SHORTU 0x6be +#define XK_Cyrillic_DZHE 0x6bf +#define XK_Serbian_DZE 0x6bf /* deprecated */ +#define XK_Cyrillic_yu 0x6c0 +#define XK_Cyrillic_a 0x6c1 +#define XK_Cyrillic_be 0x6c2 +#define XK_Cyrillic_tse 0x6c3 +#define XK_Cyrillic_de 0x6c4 +#define XK_Cyrillic_ie 0x6c5 +#define XK_Cyrillic_ef 0x6c6 +#define XK_Cyrillic_ghe 0x6c7 +#define XK_Cyrillic_ha 0x6c8 +#define XK_Cyrillic_i 0x6c9 +#define XK_Cyrillic_shorti 0x6ca +#define XK_Cyrillic_ka 0x6cb +#define XK_Cyrillic_el 0x6cc +#define XK_Cyrillic_em 0x6cd +#define XK_Cyrillic_en 0x6ce +#define XK_Cyrillic_o 0x6cf +#define XK_Cyrillic_pe 0x6d0 +#define XK_Cyrillic_ya 0x6d1 +#define XK_Cyrillic_er 0x6d2 +#define XK_Cyrillic_es 0x6d3 +#define XK_Cyrillic_te 0x6d4 +#define XK_Cyrillic_u 0x6d5 +#define XK_Cyrillic_zhe 0x6d6 +#define XK_Cyrillic_ve 0x6d7 +#define XK_Cyrillic_softsign 0x6d8 +#define XK_Cyrillic_yeru 0x6d9 +#define XK_Cyrillic_ze 0x6da +#define XK_Cyrillic_sha 0x6db +#define XK_Cyrillic_e 0x6dc +#define XK_Cyrillic_shcha 0x6dd +#define XK_Cyrillic_che 0x6de +#define XK_Cyrillic_hardsign 0x6df +#define XK_Cyrillic_YU 0x6e0 +#define XK_Cyrillic_A 0x6e1 +#define XK_Cyrillic_BE 0x6e2 +#define XK_Cyrillic_TSE 0x6e3 +#define XK_Cyrillic_DE 0x6e4 +#define XK_Cyrillic_IE 0x6e5 +#define XK_Cyrillic_EF 0x6e6 +#define XK_Cyrillic_GHE 0x6e7 +#define XK_Cyrillic_HA 0x6e8 +#define XK_Cyrillic_I 0x6e9 +#define XK_Cyrillic_SHORTI 0x6ea +#define XK_Cyrillic_KA 0x6eb +#define XK_Cyrillic_EL 0x6ec +#define XK_Cyrillic_EM 0x6ed +#define XK_Cyrillic_EN 0x6ee +#define XK_Cyrillic_O 0x6ef +#define XK_Cyrillic_PE 0x6f0 +#define XK_Cyrillic_YA 0x6f1 +#define XK_Cyrillic_ER 0x6f2 +#define XK_Cyrillic_ES 0x6f3 +#define XK_Cyrillic_TE 0x6f4 +#define XK_Cyrillic_U 0x6f5 +#define XK_Cyrillic_ZHE 0x6f6 +#define XK_Cyrillic_VE 0x6f7 +#define XK_Cyrillic_SOFTSIGN 0x6f8 +#define XK_Cyrillic_YERU 0x6f9 +#define XK_Cyrillic_ZE 0x6fa +#define XK_Cyrillic_SHA 0x6fb +#define XK_Cyrillic_E 0x6fc +#define XK_Cyrillic_SHCHA 0x6fd +#define XK_Cyrillic_CHE 0x6fe +#define XK_Cyrillic_HARDSIGN 0x6ff +#endif /* XK_CYRILLIC */ + +/* + * Greek + * Byte 3 = 7 + */ + +#ifdef XK_GREEK +#define XK_Greek_ALPHAaccent 0x7a1 +#define XK_Greek_EPSILONaccent 0x7a2 +#define XK_Greek_ETAaccent 0x7a3 +#define XK_Greek_IOTAaccent 0x7a4 +#define XK_Greek_IOTAdieresis 0x7a5 +#define XK_Greek_OMICRONaccent 0x7a7 +#define XK_Greek_UPSILONaccent 0x7a8 +#define XK_Greek_UPSILONdieresis 0x7a9 +#define XK_Greek_OMEGAaccent 0x7ab +#define XK_Greek_accentdieresis 0x7ae +#define XK_Greek_horizbar 0x7af +#define XK_Greek_alphaaccent 0x7b1 +#define XK_Greek_epsilonaccent 0x7b2 +#define XK_Greek_etaaccent 0x7b3 +#define XK_Greek_iotaaccent 0x7b4 +#define XK_Greek_iotadieresis 0x7b5 +#define XK_Greek_iotaaccentdieresis 0x7b6 +#define XK_Greek_omicronaccent 0x7b7 +#define XK_Greek_upsilonaccent 0x7b8 +#define XK_Greek_upsilondieresis 0x7b9 +#define XK_Greek_upsilonaccentdieresis 0x7ba +#define XK_Greek_omegaaccent 0x7bb +#define XK_Greek_ALPHA 0x7c1 +#define XK_Greek_BETA 0x7c2 +#define XK_Greek_GAMMA 0x7c3 +#define XK_Greek_DELTA 0x7c4 +#define XK_Greek_EPSILON 0x7c5 +#define XK_Greek_ZETA 0x7c6 +#define XK_Greek_ETA 0x7c7 +#define XK_Greek_THETA 0x7c8 +#define XK_Greek_IOTA 0x7c9 +#define XK_Greek_KAPPA 0x7ca +#define XK_Greek_LAMDA 0x7cb +#define XK_Greek_LAMBDA 0x7cb +#define XK_Greek_MU 0x7cc +#define XK_Greek_NU 0x7cd +#define XK_Greek_XI 0x7ce +#define XK_Greek_OMICRON 0x7cf +#define XK_Greek_PI 0x7d0 +#define XK_Greek_RHO 0x7d1 +#define XK_Greek_SIGMA 0x7d2 +#define XK_Greek_TAU 0x7d4 +#define XK_Greek_UPSILON 0x7d5 +#define XK_Greek_PHI 0x7d6 +#define XK_Greek_CHI 0x7d7 +#define XK_Greek_PSI 0x7d8 +#define XK_Greek_OMEGA 0x7d9 +#define XK_Greek_alpha 0x7e1 +#define XK_Greek_beta 0x7e2 +#define XK_Greek_gamma 0x7e3 +#define XK_Greek_delta 0x7e4 +#define XK_Greek_epsilon 0x7e5 +#define XK_Greek_zeta 0x7e6 +#define XK_Greek_eta 0x7e7 +#define XK_Greek_theta 0x7e8 +#define XK_Greek_iota 0x7e9 +#define XK_Greek_kappa 0x7ea +#define XK_Greek_lamda 0x7eb +#define XK_Greek_lambda 0x7eb +#define XK_Greek_mu 0x7ec +#define XK_Greek_nu 0x7ed +#define XK_Greek_xi 0x7ee +#define XK_Greek_omicron 0x7ef +#define XK_Greek_pi 0x7f0 +#define XK_Greek_rho 0x7f1 +#define XK_Greek_sigma 0x7f2 +#define XK_Greek_finalsmallsigma 0x7f3 +#define XK_Greek_tau 0x7f4 +#define XK_Greek_upsilon 0x7f5 +#define XK_Greek_phi 0x7f6 +#define XK_Greek_chi 0x7f7 +#define XK_Greek_psi 0x7f8 +#define XK_Greek_omega 0x7f9 +#define XK_Greek_switch 0xFF7E /* Alias for mode_switch */ +#endif /* XK_GREEK */ + +/* + * Technical + * Byte 3 = 8 + */ + +#ifdef XK_TECHNICAL +#define XK_leftradical 0x8a1 +#define XK_topleftradical 0x8a2 +#define XK_horizconnector 0x8a3 +#define XK_topintegral 0x8a4 +#define XK_botintegral 0x8a5 +#define XK_vertconnector 0x8a6 +#define XK_topleftsqbracket 0x8a7 +#define XK_botleftsqbracket 0x8a8 +#define XK_toprightsqbracket 0x8a9 +#define XK_botrightsqbracket 0x8aa +#define XK_topleftparens 0x8ab +#define XK_botleftparens 0x8ac +#define XK_toprightparens 0x8ad +#define XK_botrightparens 0x8ae +#define XK_leftmiddlecurlybrace 0x8af +#define XK_rightmiddlecurlybrace 0x8b0 +#define XK_topleftsummation 0x8b1 +#define XK_botleftsummation 0x8b2 +#define XK_topvertsummationconnector 0x8b3 +#define XK_botvertsummationconnector 0x8b4 +#define XK_toprightsummation 0x8b5 +#define XK_botrightsummation 0x8b6 +#define XK_rightmiddlesummation 0x8b7 +#define XK_lessthanequal 0x8bc +#define XK_notequal 0x8bd +#define XK_greaterthanequal 0x8be +#define XK_integral 0x8bf +#define XK_therefore 0x8c0 +#define XK_variation 0x8c1 +#define XK_infinity 0x8c2 +#define XK_nabla 0x8c5 +#define XK_approximate 0x8c8 +#define XK_similarequal 0x8c9 +#define XK_ifonlyif 0x8cd +#define XK_implies 0x8ce +#define XK_identical 0x8cf +#define XK_radical 0x8d6 +#define XK_includedin 0x8da +#define XK_includes 0x8db +#define XK_intersection 0x8dc +#define XK_union 0x8dd +#define XK_logicaland 0x8de +#define XK_logicalor 0x8df +#define XK_partialderivative 0x8ef +#define XK_function 0x8f6 +#define XK_leftarrow 0x8fb +#define XK_uparrow 0x8fc +#define XK_rightarrow 0x8fd +#define XK_downarrow 0x8fe +#endif /* XK_TECHNICAL */ + +/* + * Special + * Byte 3 = 9 + */ + +#ifdef XK_SPECIAL +#define XK_blank 0x9df +#define XK_soliddiamond 0x9e0 +#define XK_checkerboard 0x9e1 +#define XK_ht 0x9e2 +#define XK_ff 0x9e3 +#define XK_cr 0x9e4 +#define XK_lf 0x9e5 +#define XK_nl 0x9e8 +#define XK_vt 0x9e9 +#define XK_lowrightcorner 0x9ea +#define XK_uprightcorner 0x9eb +#define XK_upleftcorner 0x9ec +#define XK_lowleftcorner 0x9ed +#define XK_crossinglines 0x9ee +#define XK_horizlinescan1 0x9ef +#define XK_horizlinescan3 0x9f0 +#define XK_horizlinescan5 0x9f1 +#define XK_horizlinescan7 0x9f2 +#define XK_horizlinescan9 0x9f3 +#define XK_leftt 0x9f4 +#define XK_rightt 0x9f5 +#define XK_bott 0x9f6 +#define XK_topt 0x9f7 +#define XK_vertbar 0x9f8 +#endif /* XK_SPECIAL */ + +/* + * Publishing + * Byte 3 = a + */ + +#ifdef XK_PUBLISHING +#define XK_emspace 0xaa1 +#define XK_enspace 0xaa2 +#define XK_em3space 0xaa3 +#define XK_em4space 0xaa4 +#define XK_digitspace 0xaa5 +#define XK_punctspace 0xaa6 +#define XK_thinspace 0xaa7 +#define XK_hairspace 0xaa8 +#define XK_emdash 0xaa9 +#define XK_endash 0xaaa +#define XK_signifblank 0xaac +#define XK_ellipsis 0xaae +#define XK_doubbaselinedot 0xaaf +#define XK_onethird 0xab0 +#define XK_twothirds 0xab1 +#define XK_onefifth 0xab2 +#define XK_twofifths 0xab3 +#define XK_threefifths 0xab4 +#define XK_fourfifths 0xab5 +#define XK_onesixth 0xab6 +#define XK_fivesixths 0xab7 +#define XK_careof 0xab8 +#define XK_figdash 0xabb +#define XK_leftanglebracket 0xabc +#define XK_decimalpoint 0xabd +#define XK_rightanglebracket 0xabe +#define XK_marker 0xabf +#define XK_oneeighth 0xac3 +#define XK_threeeighths 0xac4 +#define XK_fiveeighths 0xac5 +#define XK_seveneighths 0xac6 +#define XK_trademark 0xac9 +#define XK_signaturemark 0xaca +#define XK_trademarkincircle 0xacb +#define XK_leftopentriangle 0xacc +#define XK_rightopentriangle 0xacd +#define XK_emopencircle 0xace +#define XK_emopenrectangle 0xacf +#define XK_leftsinglequotemark 0xad0 +#define XK_rightsinglequotemark 0xad1 +#define XK_leftdoublequotemark 0xad2 +#define XK_rightdoublequotemark 0xad3 +#define XK_prescription 0xad4 +#define XK_minutes 0xad6 +#define XK_seconds 0xad7 +#define XK_latincross 0xad9 +#define XK_hexagram 0xada +#define XK_filledrectbullet 0xadb +#define XK_filledlefttribullet 0xadc +#define XK_filledrighttribullet 0xadd +#define XK_emfilledcircle 0xade +#define XK_emfilledrect 0xadf +#define XK_enopencircbullet 0xae0 +#define XK_enopensquarebullet 0xae1 +#define XK_openrectbullet 0xae2 +#define XK_opentribulletup 0xae3 +#define XK_opentribulletdown 0xae4 +#define XK_openstar 0xae5 +#define XK_enfilledcircbullet 0xae6 +#define XK_enfilledsqbullet 0xae7 +#define XK_filledtribulletup 0xae8 +#define XK_filledtribulletdown 0xae9 +#define XK_leftpointer 0xaea +#define XK_rightpointer 0xaeb +#define XK_club 0xaec +#define XK_diamond 0xaed +#define XK_heart 0xaee +#define XK_maltesecross 0xaf0 +#define XK_dagger 0xaf1 +#define XK_doubledagger 0xaf2 +#define XK_checkmark 0xaf3 +#define XK_ballotcross 0xaf4 +#define XK_musicalsharp 0xaf5 +#define XK_musicalflat 0xaf6 +#define XK_malesymbol 0xaf7 +#define XK_femalesymbol 0xaf8 +#define XK_telephone 0xaf9 +#define XK_telephonerecorder 0xafa +#define XK_phonographcopyright 0xafb +#define XK_caret 0xafc +#define XK_singlelowquotemark 0xafd +#define XK_doublelowquotemark 0xafe +#define XK_cursor 0xaff +#endif /* XK_PUBLISHING */ + +/* + * APL + * Byte 3 = b + */ + +#ifdef XK_APL +#define XK_leftcaret 0xba3 +#define XK_rightcaret 0xba6 +#define XK_downcaret 0xba8 +#define XK_upcaret 0xba9 +#define XK_overbar 0xbc0 +#define XK_downtack 0xbc2 +#define XK_upshoe 0xbc3 +#define XK_downstile 0xbc4 +#define XK_underbar 0xbc6 +#define XK_jot 0xbca +#define XK_quad 0xbcc +#define XK_uptack 0xbce +#define XK_circle 0xbcf +#define XK_upstile 0xbd3 +#define XK_downshoe 0xbd6 +#define XK_rightshoe 0xbd8 +#define XK_leftshoe 0xbda +#define XK_lefttack 0xbdc +#define XK_righttack 0xbfc +#endif /* XK_APL */ + +/* + * Hebrew + * Byte 3 = c + */ + +#ifdef XK_HEBREW +#define XK_hebrew_doublelowline 0xcdf +#define XK_hebrew_aleph 0xce0 +#define XK_hebrew_bet 0xce1 +#define XK_hebrew_beth 0xce1 /* deprecated */ +#define XK_hebrew_gimel 0xce2 +#define XK_hebrew_gimmel 0xce2 /* deprecated */ +#define XK_hebrew_dalet 0xce3 +#define XK_hebrew_daleth 0xce3 /* deprecated */ +#define XK_hebrew_he 0xce4 +#define XK_hebrew_waw 0xce5 +#define XK_hebrew_zain 0xce6 +#define XK_hebrew_zayin 0xce6 /* deprecated */ +#define XK_hebrew_chet 0xce7 +#define XK_hebrew_het 0xce7 /* deprecated */ +#define XK_hebrew_tet 0xce8 +#define XK_hebrew_teth 0xce8 /* deprecated */ +#define XK_hebrew_yod 0xce9 +#define XK_hebrew_finalkaph 0xcea +#define XK_hebrew_kaph 0xceb +#define XK_hebrew_lamed 0xcec +#define XK_hebrew_finalmem 0xced +#define XK_hebrew_mem 0xcee +#define XK_hebrew_finalnun 0xcef +#define XK_hebrew_nun 0xcf0 +#define XK_hebrew_samech 0xcf1 +#define XK_hebrew_samekh 0xcf1 /* deprecated */ +#define XK_hebrew_ayin 0xcf2 +#define XK_hebrew_finalpe 0xcf3 +#define XK_hebrew_pe 0xcf4 +#define XK_hebrew_finalzade 0xcf5 +#define XK_hebrew_finalzadi 0xcf5 /* deprecated */ +#define XK_hebrew_zade 0xcf6 +#define XK_hebrew_zadi 0xcf6 /* deprecated */ +#define XK_hebrew_qoph 0xcf7 +#define XK_hebrew_kuf 0xcf7 /* deprecated */ +#define XK_hebrew_resh 0xcf8 +#define XK_hebrew_shin 0xcf9 +#define XK_hebrew_taw 0xcfa +#define XK_hebrew_taf 0xcfa /* deprecated */ +#define XK_Hebrew_switch 0xFF7E /* Alias for mode_switch */ +#endif /* XK_HEBREW */ + +/* + * Thai + * Byte 3 = d + */ + +#ifdef XK_THAI +#define XK_Thai_kokai 0xda1 +#define XK_Thai_khokhai 0xda2 +#define XK_Thai_khokhuat 0xda3 +#define XK_Thai_khokhwai 0xda4 +#define XK_Thai_khokhon 0xda5 +#define XK_Thai_khorakhang 0xda6 +#define XK_Thai_ngongu 0xda7 +#define XK_Thai_chochan 0xda8 +#define XK_Thai_choching 0xda9 +#define XK_Thai_chochang 0xdaa +#define XK_Thai_soso 0xdab +#define XK_Thai_chochoe 0xdac +#define XK_Thai_yoying 0xdad +#define XK_Thai_dochada 0xdae +#define XK_Thai_topatak 0xdaf +#define XK_Thai_thothan 0xdb0 +#define XK_Thai_thonangmontho 0xdb1 +#define XK_Thai_thophuthao 0xdb2 +#define XK_Thai_nonen 0xdb3 +#define XK_Thai_dodek 0xdb4 +#define XK_Thai_totao 0xdb5 +#define XK_Thai_thothung 0xdb6 +#define XK_Thai_thothahan 0xdb7 +#define XK_Thai_thothong 0xdb8 +#define XK_Thai_nonu 0xdb9 +#define XK_Thai_bobaimai 0xdba +#define XK_Thai_popla 0xdbb +#define XK_Thai_phophung 0xdbc +#define XK_Thai_fofa 0xdbd +#define XK_Thai_phophan 0xdbe +#define XK_Thai_fofan 0xdbf +#define XK_Thai_phosamphao 0xdc0 +#define XK_Thai_moma 0xdc1 +#define XK_Thai_yoyak 0xdc2 +#define XK_Thai_rorua 0xdc3 +#define XK_Thai_ru 0xdc4 +#define XK_Thai_loling 0xdc5 +#define XK_Thai_lu 0xdc6 +#define XK_Thai_wowaen 0xdc7 +#define XK_Thai_sosala 0xdc8 +#define XK_Thai_sorusi 0xdc9 +#define XK_Thai_sosua 0xdca +#define XK_Thai_hohip 0xdcb +#define XK_Thai_lochula 0xdcc +#define XK_Thai_oang 0xdcd +#define XK_Thai_honokhuk 0xdce +#define XK_Thai_paiyannoi 0xdcf +#define XK_Thai_saraa 0xdd0 +#define XK_Thai_maihanakat 0xdd1 +#define XK_Thai_saraaa 0xdd2 +#define XK_Thai_saraam 0xdd3 +#define XK_Thai_sarai 0xdd4 +#define XK_Thai_saraii 0xdd5 +#define XK_Thai_saraue 0xdd6 +#define XK_Thai_sarauee 0xdd7 +#define XK_Thai_sarau 0xdd8 +#define XK_Thai_sarauu 0xdd9 +#define XK_Thai_phinthu 0xdda +#define XK_Thai_maihanakat_maitho 0xdde +#define XK_Thai_baht 0xddf +#define XK_Thai_sarae 0xde0 +#define XK_Thai_saraae 0xde1 +#define XK_Thai_sarao 0xde2 +#define XK_Thai_saraaimaimuan 0xde3 +#define XK_Thai_saraaimaimalai 0xde4 +#define XK_Thai_lakkhangyao 0xde5 +#define XK_Thai_maiyamok 0xde6 +#define XK_Thai_maitaikhu 0xde7 +#define XK_Thai_maiek 0xde8 +#define XK_Thai_maitho 0xde9 +#define XK_Thai_maitri 0xdea +#define XK_Thai_maichattawa 0xdeb +#define XK_Thai_thanthakhat 0xdec +#define XK_Thai_nikhahit 0xded +#define XK_Thai_leksun 0xdf0 +#define XK_Thai_leknung 0xdf1 +#define XK_Thai_leksong 0xdf2 +#define XK_Thai_leksam 0xdf3 +#define XK_Thai_leksi 0xdf4 +#define XK_Thai_lekha 0xdf5 +#define XK_Thai_lekhok 0xdf6 +#define XK_Thai_lekchet 0xdf7 +#define XK_Thai_lekpaet 0xdf8 +#define XK_Thai_lekkao 0xdf9 +#endif /* XK_THAI */ + +/* + * Korean + * Byte 3 = e + */ + +#ifdef XK_KOREAN + +#define XK_Hangul 0xff31 /* Hangul start/stop(toggle) */ +#define XK_Hangul_Start 0xff32 /* Hangul start */ +#define XK_Hangul_End 0xff33 /* Hangul end, English start */ +#define XK_Hangul_Hanja 0xff34 /* Start Hangul->Hanja Conversion */ +#define XK_Hangul_Jamo 0xff35 /* Hangul Jamo mode */ +#define XK_Hangul_Romaja 0xff36 /* Hangul Romaja mode */ +#define XK_Hangul_Codeinput 0xff37 /* Hangul code input mode */ +#define XK_Hangul_Jeonja 0xff38 /* Jeonja mode */ +#define XK_Hangul_Banja 0xff39 /* Banja mode */ +#define XK_Hangul_PreHanja 0xff3a /* Pre Hanja conversion */ +#define XK_Hangul_PostHanja 0xff3b /* Post Hanja conversion */ +#define XK_Hangul_SingleCandidate 0xff3c /* Single candidate */ +#define XK_Hangul_MultipleCandidate 0xff3d /* Multiple candidate */ +#define XK_Hangul_PreviousCandidate 0xff3e /* Previous candidate */ +#define XK_Hangul_Special 0xff3f /* Special symbols */ +#define XK_Hangul_switch 0xFF7E /* Alias for mode_switch */ + +/* Hangul Consonant Characters */ +#define XK_Hangul_Kiyeog 0xea1 +#define XK_Hangul_SsangKiyeog 0xea2 +#define XK_Hangul_KiyeogSios 0xea3 +#define XK_Hangul_Nieun 0xea4 +#define XK_Hangul_NieunJieuj 0xea5 +#define XK_Hangul_NieunHieuh 0xea6 +#define XK_Hangul_Dikeud 0xea7 +#define XK_Hangul_SsangDikeud 0xea8 +#define XK_Hangul_Rieul 0xea9 +#define XK_Hangul_RieulKiyeog 0xeaa +#define XK_Hangul_RieulMieum 0xeab +#define XK_Hangul_RieulPieub 0xeac +#define XK_Hangul_RieulSios 0xead +#define XK_Hangul_RieulTieut 0xeae +#define XK_Hangul_RieulPhieuf 0xeaf +#define XK_Hangul_RieulHieuh 0xeb0 +#define XK_Hangul_Mieum 0xeb1 +#define XK_Hangul_Pieub 0xeb2 +#define XK_Hangul_SsangPieub 0xeb3 +#define XK_Hangul_PieubSios 0xeb4 +#define XK_Hangul_Sios 0xeb5 +#define XK_Hangul_SsangSios 0xeb6 +#define XK_Hangul_Ieung 0xeb7 +#define XK_Hangul_Jieuj 0xeb8 +#define XK_Hangul_SsangJieuj 0xeb9 +#define XK_Hangul_Cieuc 0xeba +#define XK_Hangul_Khieuq 0xebb +#define XK_Hangul_Tieut 0xebc +#define XK_Hangul_Phieuf 0xebd +#define XK_Hangul_Hieuh 0xebe + +/* Hangul Vowel Characters */ +#define XK_Hangul_A 0xebf +#define XK_Hangul_AE 0xec0 +#define XK_Hangul_YA 0xec1 +#define XK_Hangul_YAE 0xec2 +#define XK_Hangul_EO 0xec3 +#define XK_Hangul_E 0xec4 +#define XK_Hangul_YEO 0xec5 +#define XK_Hangul_YE 0xec6 +#define XK_Hangul_O 0xec7 +#define XK_Hangul_WA 0xec8 +#define XK_Hangul_WAE 0xec9 +#define XK_Hangul_OE 0xeca +#define XK_Hangul_YO 0xecb +#define XK_Hangul_U 0xecc +#define XK_Hangul_WEO 0xecd +#define XK_Hangul_WE 0xece +#define XK_Hangul_WI 0xecf +#define XK_Hangul_YU 0xed0 +#define XK_Hangul_EU 0xed1 +#define XK_Hangul_YI 0xed2 +#define XK_Hangul_I 0xed3 + +/* Hangul syllable-final (JongSeong) Characters */ +#define XK_Hangul_J_Kiyeog 0xed4 +#define XK_Hangul_J_SsangKiyeog 0xed5 +#define XK_Hangul_J_KiyeogSios 0xed6 +#define XK_Hangul_J_Nieun 0xed7 +#define XK_Hangul_J_NieunJieuj 0xed8 +#define XK_Hangul_J_NieunHieuh 0xed9 +#define XK_Hangul_J_Dikeud 0xeda +#define XK_Hangul_J_Rieul 0xedb +#define XK_Hangul_J_RieulKiyeog 0xedc +#define XK_Hangul_J_RieulMieum 0xedd +#define XK_Hangul_J_RieulPieub 0xede +#define XK_Hangul_J_RieulSios 0xedf +#define XK_Hangul_J_RieulTieut 0xee0 +#define XK_Hangul_J_RieulPhieuf 0xee1 +#define XK_Hangul_J_RieulHieuh 0xee2 +#define XK_Hangul_J_Mieum 0xee3 +#define XK_Hangul_J_Pieub 0xee4 +#define XK_Hangul_J_PieubSios 0xee5 +#define XK_Hangul_J_Sios 0xee6 +#define XK_Hangul_J_SsangSios 0xee7 +#define XK_Hangul_J_Ieung 0xee8 +#define XK_Hangul_J_Jieuj 0xee9 +#define XK_Hangul_J_Cieuc 0xeea +#define XK_Hangul_J_Khieuq 0xeeb +#define XK_Hangul_J_Tieut 0xeec +#define XK_Hangul_J_Phieuf 0xeed +#define XK_Hangul_J_Hieuh 0xeee + +/* Ancient Hangul Consonant Characters */ +#define XK_Hangul_RieulYeorinHieuh 0xeef +#define XK_Hangul_SunkyeongeumMieum 0xef0 +#define XK_Hangul_SunkyeongeumPieub 0xef1 +#define XK_Hangul_PanSios 0xef2 +#define XK_Hangul_KkogjiDalrinIeung 0xef3 +#define XK_Hangul_SunkyeongeumPhieuf 0xef4 +#define XK_Hangul_YeorinHieuh 0xef5 + +/* Ancient Hangul Vowel Characters */ +#define XK_Hangul_AraeA 0xef6 +#define XK_Hangul_AraeAE 0xef7 + +/* Ancient Hangul syllable-final (JongSeong) Characters */ +#define XK_Hangul_J_PanSios 0xef8 +#define XK_Hangul_J_KkogjiDalrinIeung 0xef9 +#define XK_Hangul_J_YeorinHieuh 0xefa + +/* Korean currency symbol */ +#define XK_Korean_Won 0xeff + +#endif /* XK_KOREAN */ + +/* Euro currency symbol */ +#define XK_EuroSign 0x20ac + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/rfb/rfb.h b/jni/vnc/LibVNCServer-0.9.9/rfb/rfb.h new file mode 100644 index 0000000..3446740 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/rfb/rfb.h @@ -0,0 +1,1276 @@ +#ifndef RFB_H +#define RFB_H +/** + * @defgroup libvncserver_api LibVNCServer API Reference + * @{ + */ + +/** + * @file rfb.h + */ + +/* + * Copyright (C) 2005 Rohit Kumar , + * Johannes E. Schindelin + * Copyright (C) 2002 RealVNC Ltd. + * OSXvnc Copyright (C) 2001 Dan McGuirk . + * Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge. + * All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#if(defined __cplusplus) +extern "C" +{ +#endif + +#include +#include +#include +#include + +#if defined(ANDROID) || defined(LIBVNCSERVER_HAVE_ANDROID) +#include +#include +#endif + +#ifdef LIBVNCSERVER_HAVE_SYS_TYPES_H +#include +#endif + +#ifdef __MINGW32__ +#undef SOCKET +#include +#ifdef LIBVNCSERVER_HAVE_WS2TCPIP_H +#undef socklen_t +#include +#endif +#endif + +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD +#include +#if 0 /* debugging */ +#define LOCK(mutex) (rfbLog("%s:%d LOCK(%s,0x%x)\n",__FILE__,__LINE__,#mutex,&(mutex)), pthread_mutex_lock(&(mutex))) +#define UNLOCK(mutex) (rfbLog("%s:%d UNLOCK(%s,0x%x)\n",__FILE__,__LINE__,#mutex,&(mutex)), pthread_mutex_unlock(&(mutex))) +#define MUTEX(mutex) pthread_mutex_t (mutex) +#define INIT_MUTEX(mutex) (rfbLog("%s:%d INIT_MUTEX(%s,0x%x)\n",__FILE__,__LINE__,#mutex,&(mutex)), pthread_mutex_init(&(mutex),NULL)) +#define TINI_MUTEX(mutex) (rfbLog("%s:%d TINI_MUTEX(%s)\n",__FILE__,__LINE__,#mutex), pthread_mutex_destroy(&(mutex))) +#define TSIGNAL(cond) (rfbLog("%s:%d TSIGNAL(%s)\n",__FILE__,__LINE__,#cond), pthread_cond_signal(&(cond))) +#define WAIT(cond,mutex) (rfbLog("%s:%d WAIT(%s,%s)\n",__FILE__,__LINE__,#cond,#mutex), pthread_cond_wait(&(cond),&(mutex))) +#define COND(cond) pthread_cond_t (cond) +#define INIT_COND(cond) (rfbLog("%s:%d INIT_COND(%s)\n",__FILE__,__LINE__,#cond), pthread_cond_init(&(cond),NULL)) +#define TINI_COND(cond) (rfbLog("%s:%d TINI_COND(%s)\n",__FILE__,__LINE__,#cond), pthread_cond_destroy(&(cond))) +#define IF_PTHREADS(x) x +#else +#if !NONETWORK +#define LOCK(mutex) pthread_mutex_lock(&(mutex)); +#define UNLOCK(mutex) pthread_mutex_unlock(&(mutex)); +#endif +#define MUTEX(mutex) pthread_mutex_t (mutex) +#define INIT_MUTEX(mutex) pthread_mutex_init(&(mutex),NULL) +#define TINI_MUTEX(mutex) pthread_mutex_destroy(&(mutex)) +#define TSIGNAL(cond) pthread_cond_signal(&(cond)) +#define WAIT(cond,mutex) pthread_cond_wait(&(cond),&(mutex)) +#define COND(cond) pthread_cond_t (cond) +#define INIT_COND(cond) pthread_cond_init(&(cond),NULL) +#define TINI_COND(cond) pthread_cond_destroy(&(cond)) +#define IF_PTHREADS(x) x +#endif +#else +#define LOCK(mutex) +#define UNLOCK(mutex) +#define MUTEX(mutex) +#define INIT_MUTEX(mutex) +#define TINI_MUTEX(mutex) +#define TSIGNAL(cond) +#define WAIT(cond,mutex) this_is_unsupported +#define COND(cond) +#define INIT_COND(cond) +#define TINI_COND(cond) +#define IF_PTHREADS(x) +#endif + +/* end of stuff for autoconf */ + +/* if you use pthreads, but don't define LIBVNCSERVER_HAVE_LIBPTHREAD, the structs + get all mixed up. So this gives a linker error reminding you to compile + the library and your application (at least the parts including rfb.h) + with the same support for pthreads. */ +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD +#ifdef LIBVNCSERVER_HAVE_LIBZ +#define rfbInitServer rfbInitServerWithPthreadsAndZRLE +#else +#define rfbInitServer rfbInitServerWithPthreadsButWithoutZRLE +#endif +#else +#ifdef LIBVNCSERVER_HAVE_LIBZ +#define rfbInitServer rfbInitServerWithoutPthreadsButWithZRLE +#else +#define rfbInitServer rfbInitServerWithoutPthreadsAndZRLE +#endif +#endif + +struct _rfbClientRec; +struct _rfbScreenInfo; +struct rfbCursor; + +enum rfbNewClientAction { + RFB_CLIENT_ACCEPT, + RFB_CLIENT_ON_HOLD, + RFB_CLIENT_REFUSE +}; + +enum rfbSocketState { + RFB_SOCKET_INIT, + RFB_SOCKET_READY, + RFB_SOCKET_SHUTDOWN +}; + +typedef void (*rfbKbdAddEventProcPtr) (rfbBool down, rfbKeySym keySym, struct _rfbClientRec* cl); +typedef void (*rfbKbdReleaseAllKeysProcPtr) (struct _rfbClientRec* cl); +typedef void (*rfbPtrAddEventProcPtr) (int buttonMask, int x, int y, struct _rfbClientRec* cl); +typedef void (*rfbSetXCutTextProcPtr) (char* str,int len, struct _rfbClientRec* cl); +typedef struct rfbCursor* (*rfbGetCursorProcPtr) (struct _rfbClientRec* pScreen); +typedef rfbBool (*rfbSetTranslateFunctionProcPtr)(struct _rfbClientRec* cl); +typedef rfbBool (*rfbPasswordCheckProcPtr)(struct _rfbClientRec* cl,const char* encryptedPassWord,int len); +typedef enum rfbNewClientAction (*rfbNewClientHookPtr)(struct _rfbClientRec* cl); +typedef void (*rfbDisplayHookPtr)(struct _rfbClientRec* cl); +typedef void (*rfbDisplayFinishedHookPtr)(struct _rfbClientRec* cl, int result); +/** support the capability to view the caps/num/scroll states of the X server */ +typedef int (*rfbGetKeyboardLedStateHookPtr)(struct _rfbScreenInfo* screen); +typedef rfbBool (*rfbXvpHookPtr)(struct _rfbClientRec* cl, uint8_t, uint8_t); +/** + * If x==1 and y==1 then set the whole display + * else find the window underneath x and y and set the framebuffer to the dimensions + * of that window + */ +typedef void (*rfbSetSingleWindowProcPtr) (struct _rfbClientRec* cl, int x, int y); +/** + * Status determines if the X11 server permits input from the local user + * status==0 or 1 + */ +typedef void (*rfbSetServerInputProcPtr) (struct _rfbClientRec* cl, int status); +/** + * Permit the server to allow or deny filetransfers. This is defaulted to deny + * It is called when a client initiates a connection to determine if it is permitted. + */ +typedef int (*rfbFileTransferPermitted) (struct _rfbClientRec* cl); +/** Handle the textchat messages */ +typedef void (*rfbSetTextChat) (struct _rfbClientRec* cl, int length, char *string); + +typedef struct { + uint32_t count; + rfbBool is16; /**< is the data format short? */ + union { + uint8_t* bytes; + uint16_t* shorts; + } data; /**< there have to be count*3 entries */ +} rfbColourMap; + +/** + * Security handling (RFB protocol version 3.7) + */ + +typedef struct _rfbSecurity { + uint8_t type; + void (*handler)(struct _rfbClientRec* cl); + struct _rfbSecurity* next; +} rfbSecurityHandler; + +/** + * Protocol extension handling. + */ + +typedef struct _rfbProtocolExtension { + /** returns FALSE if extension should be deactivated for client. + if newClient == NULL, it is always deactivated. */ + rfbBool (*newClient)(struct _rfbClientRec* client, void** data); + /** returns FALSE if extension should be deactivated for client. + if init == NULL, it stays activated. */ + rfbBool (*init)(struct _rfbClientRec* client, void* data); + /** if pseudoEncodings is not NULL, it contains a 0 terminated + list of the pseudo encodings handled by this extension. */ + int *pseudoEncodings; + /** returns TRUE if that pseudo encoding is handled by the extension. + encodingNumber==0 means "reset encodings". */ + rfbBool (*enablePseudoEncoding)(struct _rfbClientRec* client, + void** data, int encodingNumber); + /** returns TRUE if message was handled */ + rfbBool (*handleMessage)(struct _rfbClientRec* client, + void* data, + const rfbClientToServerMsg* message); + void (*close)(struct _rfbClientRec* client, void* data); + void (*usage)(void); + /** processArguments returns the number of handled arguments */ + int (*processArgument)(int argc, char *argv[]); + struct _rfbProtocolExtension* next; +} rfbProtocolExtension; + +typedef struct _rfbExtensionData { + rfbProtocolExtension* extension; + void* data; + struct _rfbExtensionData* next; +} rfbExtensionData; + +/** + * Per-screen (framebuffer) structure. There can be as many as you wish, + * each serving different clients. However, you have to call + * rfbProcessEvents for each of these. + */ + +typedef struct _rfbScreenInfo +{ + /** this structure has children that are scaled versions of this screen */ + struct _rfbScreenInfo *scaledScreenNext; + int scaledScreenRefCount; + + int width; + int paddedWidthInBytes; + int height; + int depth; + int bitsPerPixel; + int sizeInBytes; + + rfbPixel blackPixel; + rfbPixel whitePixel; + + /** + * some screen specific data can be put into a struct where screenData + * points to. You need this if you have more than one screen at the + * same time while using the same functions. + */ + void* screenData; + + /* additions by libvncserver */ + + rfbPixelFormat serverFormat; + rfbColourMap colourMap; /**< set this if rfbServerFormat.trueColour==FALSE */ + const char* desktopName; + char thisHost[255]; + + rfbBool autoPort; + int port; + SOCKET listenSock; + int maxSock; + int maxFd; +#ifdef __MINGW32__ + struct fd_set allFds; +#else + fd_set allFds; +#endif + + enum rfbSocketState socketState; + SOCKET inetdSock; + rfbBool inetdInitDone; + + int udpPort; + SOCKET udpSock; + struct _rfbClientRec* udpClient; + rfbBool udpSockConnected; + struct sockaddr_in udpRemoteAddr; + + int maxClientWait; + + /* http stuff */ + rfbBool httpInitDone; + rfbBool httpEnableProxyConnect; + int httpPort; + char* httpDir; + SOCKET httpListenSock; + SOCKET httpSock; + + rfbPasswordCheckProcPtr passwordCheck; + void* authPasswdData; + /** If rfbAuthPasswdData is given a list, this is the first + view only password. */ + int authPasswdFirstViewOnly; + + /** send only this many rectangles in one update */ + int maxRectsPerUpdate; + /** this is the amount of milliseconds to wait at least before sending + * an update. */ + int deferUpdateTime; +#ifdef TODELETE + char* screen; +#endif + rfbBool alwaysShared; + rfbBool neverShared; + rfbBool dontDisconnect; + struct _rfbClientRec* clientHead; + struct _rfbClientRec* pointerClient; /**< "Mutex" for pointer events */ + + + /* cursor */ + int cursorX, cursorY,underCursorBufferLen; + char* underCursorBuffer; + rfbBool dontConvertRichCursorToXCursor; + struct rfbCursor* cursor; + + /** + * the frameBuffer has to be supplied by the serving process. + * The buffer will not be freed by + */ + char* frameBuffer; + rfbKbdAddEventProcPtr kbdAddEvent; + rfbKbdReleaseAllKeysProcPtr kbdReleaseAllKeys; + rfbPtrAddEventProcPtr ptrAddEvent; + rfbSetXCutTextProcPtr setXCutText; + rfbGetCursorProcPtr getCursorPtr; + rfbSetTranslateFunctionProcPtr setTranslateFunction; + rfbSetSingleWindowProcPtr setSingleWindow; + rfbSetServerInputProcPtr setServerInput; + rfbFileTransferPermitted getFileTransferPermission; + rfbSetTextChat setTextChat; + + /** newClientHook is called just after a new client is created */ + rfbNewClientHookPtr newClientHook; + /** displayHook is called just before a frame buffer update */ + rfbDisplayHookPtr displayHook; + + /** These hooks are called to pass keyboard state back to the client */ + rfbGetKeyboardLedStateHookPtr getKeyboardLedStateHook; + +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD + MUTEX(cursorMutex); + rfbBool backgroundLoop; +#endif + + /** if TRUE, an ignoring signal handler is installed for SIGPIPE */ + rfbBool ignoreSIGPIPE; + + /** if not zero, only a slice of this height is processed every time + * an update should be sent. This should make working on a slow + * link more interactive. */ + int progressiveSliceHeight; + + in_addr_t listenInterface; + int deferPtrUpdateTime; + + /** handle as many input events as possible (default off) */ + rfbBool handleEventsEagerly; + + /** rfbEncodingServerIdentity */ + char *versionString; + + /** What does the server tell the new clients which version it supports */ + int protocolMajorVersion; + int protocolMinorVersion; + + /** command line authorization of file transfers */ + rfbBool permitFileTransfer; + + /** displayFinishedHook is called just after a frame buffer update */ + rfbDisplayFinishedHookPtr displayFinishedHook; + /** xvpHook is called to handle an xvp client message */ + rfbXvpHookPtr xvpHook; +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS + char *sslkeyfile; + char *sslcertfile; +#endif + int ipv6port; /**< The port to listen on when using IPv6. */ + char* listen6Interface; + /* We have an additional IPv6 listen socket since there are systems that + don't support dual binding sockets under *any* circumstances, for + instance OpenBSD */ + SOCKET listen6Sock; + int http6Port; + SOCKET httpListen6Sock; +} rfbScreenInfo, *rfbScreenInfoPtr; + + +/** + * rfbTranslateFnType is the type of translation functions. + */ + +typedef void (*rfbTranslateFnType)(char *table, rfbPixelFormat *in, + rfbPixelFormat *out, + char *iptr, char *optr, + int bytesBetweenInputLines, + int width, int height); + + +/* region stuff */ + +struct sraRegion; +typedef struct sraRegion* sraRegionPtr; + +/* + * Per-client structure. + */ + +typedef void (*ClientGoneHookPtr)(struct _rfbClientRec* cl); + +typedef struct _rfbFileTransferData { + int fd; + int compressionEnabled; + int fileSize; + int numPackets; + int receiving; + int sending; +} rfbFileTransferData; + + +typedef struct _rfbStatList { + uint32_t type; + uint32_t sentCount; + uint32_t bytesSent; + uint32_t bytesSentIfRaw; + uint32_t rcvdCount; + uint32_t bytesRcvd; + uint32_t bytesRcvdIfRaw; + struct _rfbStatList *Next; +} rfbStatList; + +typedef struct _rfbSslCtx rfbSslCtx; +typedef struct _wsCtx wsCtx; + +typedef struct _rfbClientRec { + + /** back pointer to the screen */ + rfbScreenInfoPtr screen; + + /** points to a scaled version of the screen buffer in cl->scaledScreenList */ + rfbScreenInfoPtr scaledScreen; + /** how did the client tell us it wanted the screen changed? Ultra style or palm style? */ + rfbBool PalmVNC; + + + /** private data. You should put any application client specific data + * into a struct and let clientData point to it. Don't forget to + * free the struct via clientGoneHook! + * + * This is useful if the IO functions have to behave client specific. + */ + void* clientData; + ClientGoneHookPtr clientGoneHook; + + SOCKET sock; + char *host; + + /* RFB protocol minor version number */ + int protocolMajorVersion; + int protocolMinorVersion; + +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD + pthread_t client_thread; +#endif + + /* Note that the RFB_INITIALISATION_SHARED state is provided to support + clients that under some circumstances do not send a ClientInit message. + In particular the Mac OS X built-in VNC client (with protocolMinorVersion + == 889) is one of those. However, it only requires this support under + special circumstances that can only be determined during the initial + authentication. If the right conditions are met this state will be + set (see the auth.c file) when rfbProcessClientInitMessage is called. + + If the state is RFB_INITIALISATION_SHARED we should not expect to recieve + any ClientInit message, but instead should proceed to the next stage + of initialisation as though an implicit ClientInit message was received + with a shared-flag of true. (There is currently no corresponding + RFB_INITIALISATION_NOTSHARED state to represent an implicit ClientInit + message with a shared-flag of false because no known existing client + requires such support at this time.) + + Note that software using LibVNCServer to provide a VNC server will only + ever have a chance to see the state field set to + RFB_INITIALISATION_SHARED if the software is multi-threaded and manages + to examine the state field during the extremely brief window after the + 'None' authentication type selection has been received from the built-in + OS X VNC client and before the rfbProcessClientInitMessage function is + called -- control cannot return to the caller during this brief window + while the state field is set to RFB_INITIALISATION_SHARED. */ + + /** Possible client states: */ + enum { + RFB_PROTOCOL_VERSION, /**< establishing protocol version */ + RFB_SECURITY_TYPE, /**< negotiating security (RFB v.3.7) */ + RFB_AUTHENTICATION, /**< authenticating */ + RFB_INITIALISATION, /**< sending initialisation messages */ + RFB_NORMAL, /**< normal protocol messages */ + + /* Ephemeral internal-use states that will never be seen by software + * using LibVNCServer to provide services: */ + + RFB_INITIALISATION_SHARED /**< sending initialisation messages with implicit shared-flag already true */ + } state; + + rfbBool reverseConnection; + rfbBool onHold; + rfbBool readyForSetColourMapEntries; + rfbBool useCopyRect; + int preferredEncoding; + int correMaxWidth, correMaxHeight; + + rfbBool viewOnly; + + /* The following member is only used during VNC authentication */ + uint8_t authChallenge[CHALLENGESIZE]; + + /* The following members represent the update needed to get the client's + framebuffer from its present state to the current state of our + framebuffer. + + If the client does not accept CopyRect encoding then the update is + simply represented as the region of the screen which has been modified + (modifiedRegion). + + If the client does accept CopyRect encoding, then the update consists of + two parts. First we have a single copy from one region of the screen to + another (the destination of the copy is copyRegion), and second we have + the region of the screen which has been modified in some other way + (modifiedRegion). + + Although the copy is of a single region, this region may have many + rectangles. When sending an update, the copyRegion is always sent + before the modifiedRegion. This is because the modifiedRegion may + overlap parts of the screen which are in the source of the copy. + + In fact during normal processing, the modifiedRegion may even overlap + the destination copyRegion. Just before an update is sent we remove + from the copyRegion anything in the modifiedRegion. */ + + sraRegionPtr copyRegion; /**< the destination region of the copy */ + int copyDX, copyDY; /**< the translation by which the copy happens */ + + sraRegionPtr modifiedRegion; + + /** As part of the FramebufferUpdateRequest, a client can express interest + in a subrectangle of the whole framebuffer. This is stored in the + requestedRegion member. In the normal case this is the whole + framebuffer if the client is ready, empty if it's not. */ + + sraRegionPtr requestedRegion; + + /** The following member represents the state of the "deferred update" timer + - when the framebuffer is modified and the client is ready, in most + cases it is more efficient to defer sending the update by a few + milliseconds so that several changes to the framebuffer can be combined + into a single update. */ + + struct timeval startDeferring; + struct timeval startPtrDeferring; + int lastPtrX; + int lastPtrY; + int lastPtrButtons; + + /** translateFn points to the translation function which is used to copy + and translate a rectangle from the framebuffer to an output buffer. */ + + rfbTranslateFnType translateFn; + char *translateLookupTable; + rfbPixelFormat format; + + /** + * UPDATE_BUF_SIZE must be big enough to send at least one whole line of the + * framebuffer. So for a max screen width of say 2K with 32-bit pixels this + * means 8K minimum. + */ + +#define UPDATE_BUF_SIZE 30000 + + char updateBuf[UPDATE_BUF_SIZE]; + int ublen; + + /* statistics */ + struct _rfbStatList *statEncList; + struct _rfbStatList *statMsgList; + int rawBytesEquivalent; + int bytesSent; + +#ifdef LIBVNCSERVER_HAVE_LIBZ + /* zlib encoding -- necessary compression state info per client */ + + struct z_stream_s compStream; + rfbBool compStreamInited; + uint32_t zlibCompressLevel; +#endif +#if defined(LIBVNCSERVER_HAVE_LIBZ) || defined(LIBVNCSERVER_HAVE_LIBPNG) + /** the quality level is also used by ZYWRLE and TightPng */ + int tightQualityLevel; + +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + /* tight encoding -- preserve zlib streams' state for each client */ + z_stream zsStruct[4]; + rfbBool zsActive[4]; + int zsLevel[4]; + int tightCompressLevel; +#endif +#endif + + /* Ultra Encoding support */ + rfbBool compStreamInitedLZO; + char *lzoWrkMem; + + rfbFileTransferData fileTransfer; + + int lastKeyboardLedState; /**< keep track of last value so we can send *change* events */ + rfbBool enableSupportedMessages; /**< client supports SupportedMessages encoding */ + rfbBool enableSupportedEncodings; /**< client supports SupportedEncodings encoding */ + rfbBool enableServerIdentity; /**< client supports ServerIdentity encoding */ + rfbBool enableKeyboardLedState; /**< client supports KeyboardState encoding */ + rfbBool enableLastRectEncoding; /**< client supports LastRect encoding */ + rfbBool enableCursorShapeUpdates; /**< client supports cursor shape updates */ + rfbBool enableCursorPosUpdates; /**< client supports cursor position updates */ + rfbBool useRichCursorEncoding; /**< rfbEncodingRichCursor is preferred */ + rfbBool cursorWasChanged; /**< cursor shape update should be sent */ + rfbBool cursorWasMoved; /**< cursor position update should be sent */ + int cursorX,cursorY; /**< the coordinates of the cursor, + if enableCursorShapeUpdates = FALSE */ + + rfbBool useNewFBSize; /**< client supports NewFBSize encoding */ + rfbBool newFBSizePending; /**< framebuffer size was changed */ + + struct _rfbClientRec *prev; + struct _rfbClientRec *next; + +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD + /** whenever a client is referenced, the refCount has to be incremented + and afterwards decremented, so that the client is not cleaned up + while being referenced. + Use the functions rfbIncrClientRef(cl) and rfbDecrClientRef(cl); + */ + int refCount; + MUTEX(refCountMutex); + COND(deleteCond); + + MUTEX(outputMutex); + MUTEX(updateMutex); + COND(updateCond); +#endif + +#ifdef LIBVNCSERVER_HAVE_LIBZ + void* zrleData; + int zywrleLevel; + int zywrleBuf[rfbZRLETileWidth * rfbZRLETileHeight]; +#endif + + /** if progressive updating is on, this variable holds the current + * y coordinate of the progressive slice. */ + int progressiveSliceY; + + rfbExtensionData* extensions; + + /** for threaded zrle */ + char *zrleBeforeBuf; + void *paletteHelper; + + /** for thread safety for rfbSendFBUpdate() */ +#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD +#define LIBVNCSERVER_SEND_MUTEX + MUTEX(sendMutex); +#endif + + /* buffers to hold pixel data before and after encoding. + per-client for thread safety */ + char *beforeEncBuf; + int beforeEncBufSize; + char *afterEncBuf; + int afterEncBufSize; + int afterEncBufLen; +#if defined(LIBVNCSERVER_HAVE_LIBZ) || defined(LIBVNCSERVER_HAVE_LIBPNG) + uint32_t tightEncoding; /* rfbEncodingTight or rfbEncodingTightPng */ +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + /* TurboVNC Encoding support (extends TightVNC) */ + int turboSubsampLevel; + int turboQualityLevel; // 1-100 scale +#endif +#endif + +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS + rfbSslCtx *sslctx; + wsCtx *wsctx; + char *wspath; /* Requests path component */ +#endif +} rfbClientRec, *rfbClientPtr; + +/** + * This macro is used to test whether there is a framebuffer update needing to + * be sent to the client. + */ + +#define FB_UPDATE_PENDING(cl) \ + (((cl)->enableCursorShapeUpdates && (cl)->cursorWasChanged) || \ + (((cl)->enableCursorShapeUpdates == FALSE && \ + ((cl)->cursorX != (cl)->screen->cursorX || \ + (cl)->cursorY != (cl)->screen->cursorY))) || \ + ((cl)->useNewFBSize && (cl)->newFBSizePending) || \ + ((cl)->enableCursorPosUpdates && (cl)->cursorWasMoved) || \ + !sraRgnEmpty((cl)->copyRegion) || !sraRgnEmpty((cl)->modifiedRegion)) + +/* + * Macros for endian swapping. + */ + +#define Swap16(s) ((((s) & 0xff) << 8) | (((s) >> 8) & 0xff)) + +#define Swap24(l) ((((l) & 0xff) << 16) | (((l) >> 16) & 0xff) | \ + (((l) & 0x00ff00))) + +#define Swap32(l) (((l) >> 24) | \ + (((l) & 0x00ff0000) >> 8) | \ + (((l) & 0x0000ff00) << 8) | \ + ((l) << 24)) + + +extern char rfbEndianTest; + +#define Swap16IfLE(s) (rfbEndianTest ? Swap16(s) : (s)) +#define Swap24IfLE(l) (rfbEndianTest ? Swap24(l) : (l)) +#define Swap32IfLE(l) (rfbEndianTest ? Swap32(l) : (l)) + +/* UltraVNC uses some windows structures unmodified, so the viewer expects LittleEndian Data */ +#define Swap16IfBE(s) (rfbEndianTest ? (s) : Swap16(s)) +#define Swap24IfBE(l) (rfbEndianTest ? (l) : Swap24(l)) +#define Swap32IfBE(l) (rfbEndianTest ? (l) : Swap32(l)) + +/* sockets.c */ + +extern int rfbMaxClientWait; + +extern void rfbInitSockets(rfbScreenInfoPtr rfbScreen); +extern void rfbShutdownSockets(rfbScreenInfoPtr rfbScreen); +extern void rfbDisconnectUDPSock(rfbScreenInfoPtr rfbScreen); +extern void rfbCloseClient(rfbClientPtr cl); +extern int rfbReadExact(rfbClientPtr cl, char *buf, int len); +extern int rfbReadExactTimeout(rfbClientPtr cl, char *buf, int len,int timeout); +extern int rfbPeekExactTimeout(rfbClientPtr cl, char *buf, int len,int timeout); +extern int rfbWriteExact(rfbClientPtr cl, const char *buf, int len); +extern int rfbCheckFds(rfbScreenInfoPtr rfbScreen,long usec); +extern int rfbConnect(rfbScreenInfoPtr rfbScreen, char* host, int port); +extern int rfbConnectToTcpAddr(char* host, int port); +extern int rfbListenOnTCPPort(int port, in_addr_t iface); +extern int rfbListenOnTCP6Port(int port, const char* iface); +extern int rfbListenOnUDPPort(int port, in_addr_t iface); +extern int rfbStringToAddr(char* string,in_addr_t* addr); +extern rfbBool rfbSetNonBlocking(int sock); + +#ifdef LIBVNCSERVER_WITH_WEBSOCKETS +/* websockets.c */ + +extern rfbBool webSocketsCheck(rfbClientPtr cl); +extern rfbBool webSocketCheckDisconnect(rfbClientPtr cl); +extern int webSocketsEncode(rfbClientPtr cl, const char *src, int len, char **dst); +extern int webSocketsDecode(rfbClientPtr cl, char *dst, int len); +#endif + +/* rfbserver.c */ + +/* Routines to iterate over the client list in a thread-safe way. + Only a single iterator can be in use at a time process-wide. */ +typedef struct rfbClientIterator *rfbClientIteratorPtr; + +extern void rfbClientListInit(rfbScreenInfoPtr rfbScreen); +extern rfbClientIteratorPtr rfbGetClientIterator(rfbScreenInfoPtr rfbScreen); +extern rfbClientPtr rfbClientIteratorNext(rfbClientIteratorPtr iterator); +extern void rfbReleaseClientIterator(rfbClientIteratorPtr iterator); +extern void rfbIncrClientRef(rfbClientPtr cl); +extern void rfbDecrClientRef(rfbClientPtr cl); + +extern void rfbNewClientConnection(rfbScreenInfoPtr rfbScreen,int sock); +extern rfbClientPtr rfbNewClient(rfbScreenInfoPtr rfbScreen,int sock); +extern rfbClientPtr rfbNewUDPClient(rfbScreenInfoPtr rfbScreen); +extern rfbClientPtr rfbReverseConnection(rfbScreenInfoPtr rfbScreen,char *host, int port); +extern void rfbClientConnectionGone(rfbClientPtr cl); +extern void rfbProcessClientMessage(rfbClientPtr cl); +extern void rfbClientConnFailed(rfbClientPtr cl, const char *reason); +extern void rfbNewUDPConnection(rfbScreenInfoPtr rfbScreen,int sock); +extern void rfbProcessUDPInput(rfbScreenInfoPtr rfbScreen); +extern rfbBool rfbSendFramebufferUpdate(rfbClientPtr cl, sraRegionPtr updateRegion); +extern rfbBool rfbSendRectEncodingRaw(rfbClientPtr cl, int x,int y,int w,int h); +extern rfbBool rfbSendUpdateBuf(rfbClientPtr cl); +extern void rfbSendServerCutText(rfbScreenInfoPtr rfbScreen,char *str, int len); +extern rfbBool rfbSendCopyRegion(rfbClientPtr cl,sraRegionPtr reg,int dx,int dy); +extern rfbBool rfbSendLastRectMarker(rfbClientPtr cl); +extern rfbBool rfbSendNewFBSize(rfbClientPtr cl, int w, int h); +extern rfbBool rfbSendSetColourMapEntries(rfbClientPtr cl, int firstColour, int nColours); +extern void rfbSendBell(rfbScreenInfoPtr rfbScreen); + +extern char *rfbProcessFileTransferReadBuffer(rfbClientPtr cl, uint32_t length); +extern rfbBool rfbSendFileTransferChunk(rfbClientPtr cl); +extern rfbBool rfbSendDirContent(rfbClientPtr cl, int length, char *buffer); +extern rfbBool rfbSendFileTransferMessage(rfbClientPtr cl, uint8_t contentType, uint8_t contentParam, uint32_t size, uint32_t length, const char *buffer); +extern char *rfbProcessFileTransferReadBuffer(rfbClientPtr cl, uint32_t length); +extern rfbBool rfbProcessFileTransfer(rfbClientPtr cl, uint8_t contentType, uint8_t contentParam, uint32_t size, uint32_t length); + +void rfbGotXCutText(rfbScreenInfoPtr rfbScreen, char *str, int len); + +/* translate.c */ + +extern rfbBool rfbEconomicTranslate; + +extern void rfbTranslateNone(char *table, rfbPixelFormat *in, + rfbPixelFormat *out, + char *iptr, char *optr, + int bytesBetweenInputLines, + int width, int height); +extern rfbBool rfbSetTranslateFunction(rfbClientPtr cl); +extern rfbBool rfbSetClientColourMap(rfbClientPtr cl, int firstColour, int nColours); +extern void rfbSetClientColourMaps(rfbScreenInfoPtr rfbScreen, int firstColour, int nColours); + +/* httpd.c */ + +extern void rfbHttpInitSockets(rfbScreenInfoPtr rfbScreen); +extern void rfbHttpShutdownSockets(rfbScreenInfoPtr rfbScreen); +extern void rfbHttpCheckFds(rfbScreenInfoPtr rfbScreen); + + + +/* auth.c */ + +extern void rfbAuthNewClient(rfbClientPtr cl); +extern void rfbProcessClientSecurityType(rfbClientPtr cl); +extern void rfbAuthProcessClientMessage(rfbClientPtr cl); +extern void rfbRegisterSecurityHandler(rfbSecurityHandler* handler); +extern void rfbUnregisterSecurityHandler(rfbSecurityHandler* handler); + +/* rre.c */ + +extern rfbBool rfbSendRectEncodingRRE(rfbClientPtr cl, int x,int y,int w,int h); + + +/* corre.c */ + +extern rfbBool rfbSendRectEncodingCoRRE(rfbClientPtr cl, int x,int y,int w,int h); + + +/* hextile.c */ + +extern rfbBool rfbSendRectEncodingHextile(rfbClientPtr cl, int x, int y, int w, + int h); + +/* ultra.c */ + +/* Set maximum ultra rectangle size in pixels. Always allow at least + * two scan lines. + */ +#define ULTRA_MAX_RECT_SIZE (128*256) +#define ULTRA_MAX_SIZE(min) ((( min * 2 ) > ULTRA_MAX_RECT_SIZE ) ? \ + ( min * 2 ) : ULTRA_MAX_RECT_SIZE ) + +extern rfbBool rfbSendRectEncodingUltra(rfbClientPtr cl, int x,int y,int w,int h); + + +#ifdef LIBVNCSERVER_HAVE_LIBZ +/* zlib.c */ + +/** Minimum zlib rectangle size in bytes. Anything smaller will + * not compress well due to overhead. + */ +#define VNC_ENCODE_ZLIB_MIN_COMP_SIZE (17) + +/* Set maximum zlib rectangle size in pixels. Always allow at least + * two scan lines. + */ +#define ZLIB_MAX_RECT_SIZE (128*256) +#define ZLIB_MAX_SIZE(min) ((( min * 2 ) > ZLIB_MAX_RECT_SIZE ) ? \ + ( min * 2 ) : ZLIB_MAX_RECT_SIZE ) + +extern rfbBool rfbSendRectEncodingZlib(rfbClientPtr cl, int x, int y, int w, + int h); + +#ifdef LIBVNCSERVER_HAVE_LIBJPEG +/* tight.c */ + +#define TIGHT_DEFAULT_COMPRESSION 6 +#define TURBO_DEFAULT_SUBSAMP 0 + +extern rfbBool rfbTightDisableGradient; + +extern int rfbNumCodedRectsTight(rfbClientPtr cl, int x,int y,int w,int h); + +extern rfbBool rfbSendRectEncodingTight(rfbClientPtr cl, int x,int y,int w,int h); + +#if defined(LIBVNCSERVER_HAVE_LIBPNG) +extern rfbBool rfbSendRectEncodingTightPng(rfbClientPtr cl, int x,int y,int w,int h); +#endif + +#endif +#endif + + +/* cursor.c */ + +typedef struct rfbCursor { + /** set this to true if LibVNCServer has to free this cursor */ + rfbBool cleanup, cleanupSource, cleanupMask, cleanupRichSource; + unsigned char *source; /**< points to bits */ + unsigned char *mask; /**< points to bits */ + unsigned short width, height, xhot, yhot; /**< metrics */ + unsigned short foreRed, foreGreen, foreBlue; /**< device-independent colour */ + unsigned short backRed, backGreen, backBlue; /**< device-independent colour */ + unsigned char *richSource; /**< source bytes for a rich cursor */ + unsigned char *alphaSource; /**< source for alpha blending info */ + rfbBool alphaPreMultiplied; /**< if richSource already has alpha applied */ +} rfbCursor, *rfbCursorPtr; +extern unsigned char rfbReverseByte[0x100]; + +extern rfbBool rfbSendCursorShape(rfbClientPtr cl/*, rfbScreenInfoPtr pScreen*/); +extern rfbBool rfbSendCursorPos(rfbClientPtr cl); +extern void rfbConvertLSBCursorBitmapOrMask(int width,int height,unsigned char* bitmap); +extern rfbCursorPtr rfbMakeXCursor(int width,int height,char* cursorString,char* maskString); +extern char* rfbMakeMaskForXCursor(int width,int height,char* cursorString); +extern char* rfbMakeMaskFromAlphaSource(int width,int height,unsigned char* alphaSource); +extern void rfbMakeXCursorFromRichCursor(rfbScreenInfoPtr rfbScreen,rfbCursorPtr cursor); +extern void rfbMakeRichCursorFromXCursor(rfbScreenInfoPtr rfbScreen,rfbCursorPtr cursor); +extern void rfbFreeCursor(rfbCursorPtr cursor); +extern void rfbSetCursor(rfbScreenInfoPtr rfbScreen,rfbCursorPtr c); + +/** cursor handling for the pointer */ +extern void rfbDefaultPtrAddEvent(int buttonMask,int x,int y,rfbClientPtr cl); + +/* zrle.c */ +#ifdef LIBVNCSERVER_HAVE_LIBZ +extern rfbBool rfbSendRectEncodingZRLE(rfbClientPtr cl, int x, int y, int w,int h); +#endif + +/* stats.c */ + +extern void rfbResetStats(rfbClientPtr cl); +extern void rfbPrintStats(rfbClientPtr cl); + +/* font.c */ + +typedef struct rfbFontData { + unsigned char* data; + /** + metaData is a 256*5 array: + for each character + (offset,width,height,x,y) + */ + int* metaData; +} rfbFontData,* rfbFontDataPtr; + +int rfbDrawChar(rfbScreenInfoPtr rfbScreen,rfbFontDataPtr font,int x,int y,unsigned char c,rfbPixel colour); +void rfbDrawString(rfbScreenInfoPtr rfbScreen,rfbFontDataPtr font,int x,int y,const char* string,rfbPixel colour); +/** if colour==backColour, background is transparent */ +int rfbDrawCharWithClip(rfbScreenInfoPtr rfbScreen,rfbFontDataPtr font,int x,int y,unsigned char c,int x1,int y1,int x2,int y2,rfbPixel colour,rfbPixel backColour); +void rfbDrawStringWithClip(rfbScreenInfoPtr rfbScreen,rfbFontDataPtr font,int x,int y,const char* string,int x1,int y1,int x2,int y2,rfbPixel colour,rfbPixel backColour); +int rfbWidthOfString(rfbFontDataPtr font,const char* string); +int rfbWidthOfChar(rfbFontDataPtr font,unsigned char c); +void rfbFontBBox(rfbFontDataPtr font,unsigned char c,int* x1,int* y1,int* x2,int* y2); +/** this returns the smallest box enclosing any character of font. */ +void rfbWholeFontBBox(rfbFontDataPtr font,int *x1, int *y1, int *x2, int *y2); + +/** dynamically load a linux console font (4096 bytes, 256 glyphs a 8x16 */ +rfbFontDataPtr rfbLoadConsoleFont(char *filename); +/** free a dynamically loaded font */ +void rfbFreeFont(rfbFontDataPtr font); + +/* draw.c */ + +void rfbFillRect(rfbScreenInfoPtr s,int x1,int y1,int x2,int y2,rfbPixel col); +void rfbDrawPixel(rfbScreenInfoPtr s,int x,int y,rfbPixel col); +void rfbDrawLine(rfbScreenInfoPtr s,int x1,int y1,int x2,int y2,rfbPixel col); + +/* selbox.c */ + +/** this opens a modal select box. list is an array of strings, the end marked + with a NULL. + It returns the index in the list or -1 if cancelled or something else + wasn't kosher. */ +typedef void (*SelectionChangedHookPtr)(int _index); +extern int rfbSelectBox(rfbScreenInfoPtr rfbScreen, + rfbFontDataPtr font, char** list, + int x1, int y1, int x2, int y2, + rfbPixel foreColour, rfbPixel backColour, + int border,SelectionChangedHookPtr selChangedHook); + +/* cargs.c */ + +extern void rfbUsage(void); +extern void rfbPurgeArguments(int* argc,int* position,int count,char *argv[]); +extern rfbBool rfbProcessArguments(rfbScreenInfoPtr rfbScreen,int* argc, char *argv[]); +extern rfbBool rfbProcessSizeArguments(int* width,int* height,int* bpp,int* argc, char *argv[]); + +/* main.c */ + +extern void rfbLogEnable(int enabled); +typedef void (*rfbLogProc)(const char *format, ...); +extern rfbLogProc rfbLog, rfbErr; +extern void rfbLogPerror(const char *str); + +void rfbScheduleCopyRect(rfbScreenInfoPtr rfbScreen,int x1,int y1,int x2,int y2,int dx,int dy); +void rfbScheduleCopyRegion(rfbScreenInfoPtr rfbScreen,sraRegionPtr copyRegion,int dx,int dy); + +void rfbDoCopyRect(rfbScreenInfoPtr rfbScreen,int x1,int y1,int x2,int y2,int dx,int dy); +void rfbDoCopyRegion(rfbScreenInfoPtr rfbScreen,sraRegionPtr copyRegion,int dx,int dy); + +void rfbMarkRectAsModified(rfbScreenInfoPtr rfbScreen,int x1,int y1,int x2,int y2); +void rfbMarkRegionAsModified(rfbScreenInfoPtr rfbScreen,sraRegionPtr modRegion); +void rfbDoNothingWithClient(rfbClientPtr cl); +enum rfbNewClientAction defaultNewClientHook(rfbClientPtr cl); +void rfbRegisterProtocolExtension(rfbProtocolExtension* extension); +void rfbUnregisterProtocolExtension(rfbProtocolExtension* extension); +struct _rfbProtocolExtension* rfbGetExtensionIterator(); +void rfbReleaseExtensionIterator(); +rfbBool rfbEnableExtension(rfbClientPtr cl, rfbProtocolExtension* extension, + void* data); +rfbBool rfbDisableExtension(rfbClientPtr cl, rfbProtocolExtension* extension); +void* rfbGetExtensionClientData(rfbClientPtr cl, rfbProtocolExtension* extension); + +/** to check against plain passwords */ +rfbBool rfbCheckPasswordByList(rfbClientPtr cl,const char* response,int len); + +/* functions to make a vnc server */ +extern rfbScreenInfoPtr rfbGetScreen(int* argc,char** argv, + int width,int height,int bitsPerSample,int samplesPerPixel, + int bytesPerPixel); +extern void rfbInitServer(rfbScreenInfoPtr rfbScreen); +extern void rfbShutdownServer(rfbScreenInfoPtr rfbScreen,rfbBool disconnectClients); +extern void rfbNewFramebuffer(rfbScreenInfoPtr rfbScreen,char *framebuffer, + int width,int height, int bitsPerSample,int samplesPerPixel, + int bytesPerPixel); + +extern void rfbScreenCleanup(rfbScreenInfoPtr screenInfo); +extern void rfbSetServerVersionIdentity(rfbScreenInfoPtr screen, char *fmt, ...); + +/* functions to accept/refuse a client that has been put on hold + by a NewClientHookPtr function. Must not be called in other + situations. */ +extern void rfbStartOnHoldClient(rfbClientPtr cl); +extern void rfbRefuseOnHoldClient(rfbClientPtr cl); + +/* call one of these two functions to service the vnc clients. + usec are the microseconds the select on the fds waits. + if you are using the event loop, set this to some value > 0, so the + server doesn't get a high load just by listening. + rfbProcessEvents() returns TRUE if an update was pending. */ + +extern void rfbRunEventLoop(rfbScreenInfoPtr screenInfo, long usec, rfbBool runInBackground); +extern rfbBool rfbProcessEvents(rfbScreenInfoPtr screenInfo,long usec); +extern rfbBool rfbIsActive(rfbScreenInfoPtr screenInfo); + +/* TightVNC file transfer extension */ +void rfbRegisterTightVNCFileTransferExtension(); +void rfbUnregisterTightVNCFileTransferExtension(); + +/* Statistics */ +extern char *messageNameServer2Client(uint32_t type, char *buf, int len); +extern char *messageNameClient2Server(uint32_t type, char *buf, int len); +extern char *encodingName(uint32_t enc, char *buf, int len); + +extern rfbStatList *rfbStatLookupEncoding(rfbClientPtr cl, uint32_t type); +extern rfbStatList *rfbStatLookupMessage(rfbClientPtr cl, uint32_t type); + +/* Each call to rfbStatRecord* adds one to the rect count for that type */ +extern void rfbStatRecordEncodingSent(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw); +extern void rfbStatRecordEncodingSentAdd(rfbClientPtr cl, uint32_t type, int byteCount); /* Specifically for tight encoding */ +extern void rfbStatRecordEncodingRcvd(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw); +extern void rfbStatRecordMessageSent(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw); +extern void rfbStatRecordMessageRcvd(rfbClientPtr cl, uint32_t type, int byteCount, int byteIfRaw); +extern void rfbResetStats(rfbClientPtr cl); +extern void rfbPrintStats(rfbClientPtr cl); + +extern int rfbStatGetSentBytes(rfbClientPtr cl); +extern int rfbStatGetSentBytesIfRaw(rfbClientPtr cl); +extern int rfbStatGetRcvdBytes(rfbClientPtr cl); +extern int rfbStatGetRcvdBytesIfRaw(rfbClientPtr cl); +extern int rfbStatGetMessageCountSent(rfbClientPtr cl, uint32_t type); +extern int rfbStatGetMessageCountRcvd(rfbClientPtr cl, uint32_t type); +extern int rfbStatGetEncodingCountSent(rfbClientPtr cl, uint32_t type); +extern int rfbStatGetEncodingCountRcvd(rfbClientPtr cl, uint32_t type); + +/** Set which version you want to advertise 3.3, 3.6, 3.7 and 3.8 are currently supported*/ +extern void rfbSetProtocolVersion(rfbScreenInfoPtr rfbScreen, int major_, int minor_); + +/** send a TextChat message to a client */ +extern rfbBool rfbSendTextChatMessage(rfbClientPtr cl, uint32_t length, char *buffer); + + +/* + * Additions for Qt event loop integration + * Original idea taken from vino. + */ +rfbBool rfbProcessNewConnection(rfbScreenInfoPtr rfbScreen); +rfbBool rfbUpdateClient(rfbClientPtr cl); + + +#if(defined __cplusplus) +} +#endif + +/** + * @} + */ + + +/** + @page libvncserver_doc LibVNCServer Documentation + @section create_server Creating a server instance + To make a server, you just have to initialise a server structure using the + function rfbGetScreen(), like + @code + rfbScreenInfoPtr screen = + rfbGetScreen(argc,argv,screenwidth,screenheight,8,3,bpp); + @endcode + where byte per pixel should be 1, 2 or 4. If performance doesn't matter, + you may try bpp=3 (internally one cannot use native data types in this + case; if you want to use this, look at pnmshow24.c). + + You then can set hooks and io functions (see @ref making_it_interactive) or other + options (see @ref server_options). + + And you allocate the frame buffer like this: + @code + screen->frameBuffer = (char*)malloc(screenwidth*screenheight*bpp); + @endcode + After that, you initialize the server, like + @code + rfbInitServer(screen); + @endcode + You can use a blocking event loop, a background (pthread based) event loop, + or implement your own using the rfbProcessEvents() function. + + @subsection server_options Optional Server Features + + These options have to be set between rfbGetScreen() and rfbInitServer(). + + If you already have a socket to talk to, just set rfbScreenInfo::inetdSock + (originally this is for inetd handling, but why not use it for your purpose?). + + To also start an HTTP server (running on port 5800+display_number), you have + to set rfbScreenInfo::httpDir to a directory containing vncviewer.jar and + index.vnc (like the included "webclients" directory). + + @section making_it_interactive Making it interactive + + Whenever you draw something, you have to call + @code + rfbMarkRectAsModified(screen,x1,y1,x2,y2). + @endcode + This tells LibVNCServer to send updates to all connected clients. + + There exist the following IO functions as members of rfbScreen: + rfbScreenInfo::kbdAddEvent(), rfbScreenInfo::kbdReleaseAllKeys(), rfbScreenInfo::ptrAddEvent() and rfbScreenInfo::setXCutText() + + rfbScreenInfo::kbdAddEvent() + is called when a key is pressed. + rfbScreenInfo::kbdReleaseAllKeys() + is not called at all (maybe in the future). + rfbScreenInfo::ptrAddEvent() + is called when the mouse moves or a button is pressed. + WARNING: if you want to have proper cursor handling, call + rfbDefaultPtrAddEvent() + in your own function. This sets the coordinates of the cursor. + rfbScreenInfo::setXCutText() + is called when the selection changes. + + There are only two hooks: + rfbScreenInfo::newClientHook() + is called when a new client has connected. + rfbScreenInfo::displayHook() + is called just before a frame buffer update is sent. + + You can also override the following methods: + rfbScreenInfo::getCursorPtr() + This could be used to make an animated cursor (if you really want ...) + rfbScreenInfo::setTranslateFunction() + If you insist on colour maps or something more obscure, you have to + implement this. Default is a trueColour mapping. + + @section cursor_handling Cursor handling + + The screen holds a pointer + rfbScreenInfo::cursor + to the current cursor. Whenever you set it, remember that any dynamically + created cursor (like return value from rfbMakeXCursor()) is not free'd! + + The rfbCursor structure consists mainly of a mask and a source. The rfbCursor::mask + describes, which pixels are drawn for the cursor (a cursor needn't be + rectangular). The rfbCursor::source describes, which colour those pixels should have. + + The standard is an XCursor: a cursor with a foreground and a background + colour (stored in backRed,backGreen,backBlue and the same for foreground + in a range from 0-0xffff). Therefore, the arrays "mask" and "source" + contain pixels as single bits stored in bytes in MSB order. The rows are + padded, such that each row begins with a new byte (i.e. a 10x4 + cursor's mask has 2x4 bytes, because 2 bytes are needed to hold 10 bits). + + It is however very easy to make a cursor like this: + @code + char* cur=" " + " xx " + " x " + " "; + char* mask="xxxx" + "xxxx" + "xxxx" + "xxx "; + rfbCursorPtr c=rfbMakeXCursor(4,4,cur,mask); + @endcode + You can even set rfbCursor::mask to NULL in this call and LibVNCServer will calculate + a mask for you (dynamically, so you have to free it yourself). + + There is also an array named rfbCursor::richSource for colourful cursors. They have + the same format as the frameBuffer (i.e. if the server is 32 bit, + a 10x4 cursor has 4x10x4 bytes). + + @section screen_client_difference What is the difference between rfbScreenInfoPtr and rfbClientPtr? + + The rfbScreenInfoPtr is a pointer to a rfbScreenInfo structure, which + holds information about the server, like pixel format, io functions, + frame buffer etc. The rfbClientPtr is a pointer to an rfbClientRec structure, which holds + information about a client, like pixel format, socket of the + connection, etc. A server can have several clients, but needn't have any. So, if you + have a server and three clients are connected, you have one instance + of a rfbScreenInfo and three instances of rfbClientRec's. + + The rfbClientRec structure holds a member rfbClientRec::screen which points to the server. + So, to access the server from the client structure, you use client->screen. + + To access all clients from a server be sure to use the provided iterator + rfbGetClientIterator() + with + rfbClientIteratorNext() + and + rfbReleaseClientIterator() + to prevent thread clashes. + + @section example_code Example Code + + There are two documented examples included: + - example.c, a shared scribble sheet + - pnmshow.c, a program to show PNMs (pictures) over the net. + + The examples are not too well documented, but easy straight forward and a + good starting point. + + Try example.c: it outputs on which port it listens (default: 5900), so it is + display 0. To view, call @code vncviewer :0 @endcode + You should see a sheet with a gradient and "Hello World!" written on it. Try + to paint something. Note that everytime you click, there is some bigger blot, + whereas when you drag the mouse while clicked you draw a line. The size of the + blot depends on the mouse button you click. Open a second vncviewer with + the same parameters and watch it as you paint in the other window. This also + works over internet. You just have to know either the name or the IP of your + machine. Then it is @code vncviewer machine.where.example.runs.com:0 @endcode + or similar for the remote client. Now you are ready to type something. Be sure + that your mouse sits still, because everytime the mouse moves, the cursor is + reset to the position of the pointer! If you are done with that demo, press + the down or up arrows. If your viewer supports it, then the dimensions of the + sheet change. Just press Escape in the viewer. Note that the server still + runs, even if you closed both windows. When you reconnect now, everything you + painted and wrote is still there. You can press "Page Up" for a blank page. + + The demo pnmshow.c is much simpler: you either provide a filename as argument + or pipe a file through stdin. Note that the file has to be a raw pnm/ppm file, + i.e. a truecolour graphics. Only the Escape key is implemented. This may be + the best starting point if you want to learn how to use LibVNCServer. You + are confronted with the fact that the bytes per pixel can only be 8, 16 or 32. +*/ + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/rfb/rfbclient.h b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbclient.h new file mode 100644 index 0000000..0ecc5e4 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbclient.h @@ -0,0 +1,648 @@ +#ifndef RFBCLIENT_H +#define RFBCLIENT_H + +/** + * @defgroup libvncclient_api LibVNCClient API Reference + * @{ + */ + +/* + * Copyright (C) 2000, 2001 Const Kaplinsky. All Rights Reserved. + * Copyright (C) 2000 Tridia Corporation. All Rights Reserved. + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/** + * @file rfbclient.h + */ + +#include +#include +#include +#include +#include +#include +#include + +#define rfbClientSwap16IfLE(s) \ + (*(char *)&client->endianTest ? ((((s) & 0xff) << 8) | (((s) >> 8) & 0xff)) : (s)) + +#define rfbClientSwap32IfLE(l) \ + (*(char *)&client->endianTest ? ((((l) & 0xff000000) >> 24) | \ + (((l) & 0x00ff0000) >> 8) | \ + (((l) & 0x0000ff00) << 8) | \ + (((l) & 0x000000ff) << 24)) : (l)) + +#define rfbClientSwap64IfLE(l) \ + (*(char *)&client->endianTest ? ((((l) & 0xff00000000000000ULL) >> 56) | \ + (((l) & 0x00ff000000000000ULL) >> 40) | \ + (((l) & 0x0000ff0000000000ULL) >> 24) | \ + (((l) & 0x000000ff00000000ULL) >> 8) | \ + (((l) & 0x00000000ff000000ULL) << 8) | \ + (((l) & 0x0000000000ff0000ULL) << 24) | \ + (((l) & 0x000000000000ff00ULL) << 40) | \ + (((l) & 0x00000000000000ffULL) << 56)) : (l)) + +#define FLASH_PORT_OFFSET 5400 +#define LISTEN_PORT_OFFSET 5500 +#define TUNNEL_PORT_OFFSET 5500 +#define SERVER_PORT_OFFSET 5900 + +#define DEFAULT_SSH_CMD "/usr/bin/ssh" +#define DEFAULT_TUNNEL_CMD \ + (DEFAULT_SSH_CMD " -f -L %L:localhost:%R %H sleep 20") +#define DEFAULT_VIA_CMD \ + (DEFAULT_SSH_CMD " -f -L %L:%H:%R %G sleep 20") + +#if(defined __cplusplus) +extern "C" +{ +#endif + +/** vncrec */ + +typedef struct { + FILE* file; + struct timeval tv; + rfbBool readTimestamp; + rfbBool doNotSleep; +} rfbVNCRec; + +/** client data */ + +typedef struct rfbClientData { + void* tag; + void* data; + struct rfbClientData* next; +} rfbClientData; + +/** app data (belongs into rfbClient?) */ + +typedef struct { + rfbBool shareDesktop; + rfbBool viewOnly; + + const char* encodingsString; + + rfbBool useBGR233; + int nColours; + rfbBool forceOwnCmap; + rfbBool forceTrueColour; + int requestedDepth; + + int compressLevel; + int qualityLevel; + rfbBool enableJPEG; + rfbBool useRemoteCursor; + rfbBool palmVNC; /**< use palmvnc specific SetScale (vs ultravnc) */ + int scaleSetting; /**< 0 means no scale set, else 1/scaleSetting */ +} AppData; + +/** For GetCredentialProc callback function to return */ +typedef union _rfbCredential +{ + /** X509 (VeNCrypt) */ + struct + { + char *x509CACertFile; + char *x509CACrlFile; + char *x509ClientCertFile; + char *x509ClientKeyFile; + } x509Credential; + /** Plain (VeNCrypt), MSLogon (UltraVNC) */ + struct + { + char *username; + char *password; + } userCredential; +} rfbCredential; + +#define rfbCredentialTypeX509 1 +#define rfbCredentialTypeUser 2 + +struct _rfbClient; + +/** + * Handles a text chat message. If your application should accept text messages + * from the server, define a function with this prototype and set + * client->HandleTextChat to a pointer to that function subsequent to your + * rfbGetClient() call. + * @param client The client which called the text chat handler + * @param value text length if text != NULL, or one of rfbTextChatOpen, + * rfbTextChatClose, rfbTextChatFinished if text == NULL + * @param text The text message from the server + */ +typedef void (*HandleTextChatProc)(struct _rfbClient* client, int value, char *text); +/** + * Handles XVP server messages. If your application sends XVP messages to the + * server, you'll want to handle the server's XVP_FAIL and XVP_INIT responses. + * Define a function with this prototype and set client->HandleXvpMsg to a + * pointer to that function subsequent to your rfbGetClient() call. + * @param client The client which called the XVP message handler + * @param version The highest XVP extension version that the server supports + * @param opcode The opcode. 0 is XVP_FAIL, 1 is XVP_INIT + */ +typedef void (*HandleXvpMsgProc)(struct _rfbClient* client, uint8_t version, uint8_t opcode); +typedef void (*HandleKeyboardLedStateProc)(struct _rfbClient* client, int value, int pad); +typedef rfbBool (*HandleCursorPosProc)(struct _rfbClient* client, int x, int y); +typedef void (*SoftCursorLockAreaProc)(struct _rfbClient* client, int x, int y, int w, int h); +typedef void (*SoftCursorUnlockScreenProc)(struct _rfbClient* client); +typedef void (*GotFrameBufferUpdateProc)(struct _rfbClient* client, int x, int y, int w, int h); +typedef void (*FinishedFrameBufferUpdateProc)(struct _rfbClient* client); +typedef char* (*GetPasswordProc)(struct _rfbClient* client); +typedef rfbCredential* (*GetCredentialProc)(struct _rfbClient* client, int credentialType); +typedef rfbBool (*MallocFrameBufferProc)(struct _rfbClient* client); +typedef void (*GotXCutTextProc)(struct _rfbClient* client, const char *text, int textlen); +typedef void (*BellProc)(struct _rfbClient* client); + +typedef void (*GotCursorShapeProc)(struct _rfbClient* client, int xhot, int yhot, int width, int height, int bytesPerPixel); +typedef void (*GotCopyRectProc)(struct _rfbClient* client, int src_x, int src_y, int w, int h, int dest_x, int dest_y); + +typedef struct _rfbClient { + uint8_t* frameBuffer; + int width, height; + + int endianTest; + + AppData appData; + + const char* programName; + char* serverHost; + int serverPort; /**< if -1, then use file recorded by vncrec */ + rfbBool listenSpecified; + int listenPort, flashPort; + + struct { + int x, y, w, h; + } updateRect; + + /** Note that the CoRRE encoding uses this buffer and assumes it is big enough + to hold 255 * 255 * 32 bits -> 260100 bytes. 640*480 = 307200 bytes. + Hextile also assumes it is big enough to hold 16 * 16 * 32 bits. + Tight encoding assumes BUFFER_SIZE is at least 16384 bytes. */ + +#define RFB_BUFFER_SIZE (640*480) + char buffer[RFB_BUFFER_SIZE]; + + /* rfbproto.c */ + + int sock; + rfbBool canUseCoRRE; + rfbBool canUseHextile; + char *desktopName; + rfbPixelFormat format; + rfbServerInitMsg si; + + /* sockets.c */ +#define RFB_BUF_SIZE 8192 + char buf[RFB_BUF_SIZE]; + char *bufoutptr; + int buffered; + + /* The zlib encoding requires expansion/decompression/deflation of the + compressed data in the "buffer" above into another, result buffer. + However, the size of the result buffer can be determined precisely + based on the bitsPerPixel, height and width of the rectangle. We + allocate this buffer one time to be the full size of the buffer. */ + + /* Ultra Encoding uses this buffer too */ + + int ultra_buffer_size; + char *ultra_buffer; + + int raw_buffer_size; + char *raw_buffer; + +#ifdef LIBVNCSERVER_HAVE_LIBZ + z_stream decompStream; + rfbBool decompStreamInited; +#endif + + +#ifdef LIBVNCSERVER_HAVE_LIBZ + /* + * Variables for the ``tight'' encoding implementation. + */ + + /** Separate buffer for compressed data. */ +#define ZLIB_BUFFER_SIZE 30000 + char zlib_buffer[ZLIB_BUFFER_SIZE]; + + /* Four independent compression streams for zlib library. */ + z_stream zlibStream[4]; + rfbBool zlibStreamActive[4]; + + /* Filter stuff. Should be initialized by filter initialization code. */ + rfbBool cutZeros; + int rectWidth, rectColors; + char tightPalette[256*4]; + uint8_t tightPrevRow[2048*3*sizeof(uint16_t)]; + +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + /** JPEG decoder state. */ + rfbBool jpegError; + + struct jpeg_source_mgr* jpegSrcManager; + void* jpegBufferPtr; + size_t jpegBufferLen; + +#endif +#endif + + + /* cursor.c */ + uint8_t *rcSource, *rcMask; + + /** private data pointer */ + rfbClientData* clientData; + + rfbVNCRec* vncRec; + + /* Keyboard State support (is 'Caps Lock' set on the remote display???) */ + int KeyboardLedStateEnabled; + int CurrentKeyboardLedState; + + int canHandleNewFBSize; + + /* hooks */ + HandleTextChatProc HandleTextChat; + HandleKeyboardLedStateProc HandleKeyboardLedState; + HandleCursorPosProc HandleCursorPos; + SoftCursorLockAreaProc SoftCursorLockArea; + SoftCursorUnlockScreenProc SoftCursorUnlockScreen; + GotFrameBufferUpdateProc GotFrameBufferUpdate; + /** the pointer returned by GetPassword will be freed after use! */ + GetPasswordProc GetPassword; + MallocFrameBufferProc MallocFrameBuffer; + GotXCutTextProc GotXCutText; + BellProc Bell; + + GotCursorShapeProc GotCursorShape; + GotCopyRectProc GotCopyRect; + + /** Which messages are supported by the server + * This is a *guess* for most servers. + * (If we can even detect the type of server) + * + * If the server supports the "rfbEncodingSupportedMessages" + * then this will be updated when the encoding is received to + * accurately reflect the servers capabilities. + */ + rfbSupportedMessages supportedMessages; + + /** negotiated protocol version */ + int major, minor; + + /** The selected security types */ + uint32_t authScheme, subAuthScheme; + + /** The TLS session for Anonymous TLS and VeNCrypt */ + void* tlsSession; + + /** To support security types that requires user input (except VNC password + * authentication), for example VeNCrypt and MSLogon, this callback function + * must be set before the authentication. Otherwise, it implicates that the + * caller application does not support it and related security types should + * be bypassed. + */ + GetCredentialProc GetCredential; + + /** The 0-terminated security types supported by the client. + * Set by function SetClientAuthSchemes() */ + uint32_t *clientAuthSchemes; + + /** When the server is a repeater, this specifies the final destination */ + char *destHost; + int destPort; + + /** the QoS IP DSCP for this client */ + int QoS_DSCP; + + /** hook to handle xvp server messages */ + HandleXvpMsgProc HandleXvpMsg; + + /* listen.c */ + int listenSock; + + FinishedFrameBufferUpdateProc FinishedFrameBufferUpdate; + + char *listenAddress; + /* IPv6 listen socket, address and port*/ + int listen6Sock; + char* listen6Address; + int listen6Port; +} rfbClient; + +/* cursor.c */ + +extern rfbBool HandleCursorShape(rfbClient* client,int xhot, int yhot, int width, int height, uint32_t enc); + +/* listen.c */ + +extern void listenForIncomingConnections(rfbClient* viewer); +extern int listenForIncomingConnectionsNoFork(rfbClient* viewer, int usec_timeout); + +/* rfbproto.c */ + +extern rfbBool rfbEnableClientLogging; +typedef void (*rfbClientLogProc)(const char *format, ...); +extern rfbClientLogProc rfbClientLog,rfbClientErr; +extern rfbBool ConnectToRFBServer(rfbClient* client,const char *hostname, int port); +extern rfbBool ConnectToRFBRepeater(rfbClient* client,const char *repeaterHost, int repeaterPort, const char *destHost, int destPort); +extern void SetClientAuthSchemes(rfbClient* client,const uint32_t *authSchemes, int size); +extern rfbBool InitialiseRFBConnection(rfbClient* client); +/** + * Sends format and encoding parameters to the server. Your application can + * modify the 'client' data structure directly. However some changes to this + * structure must be communicated back to the server. For instance, if you + * change the encoding to hextile, the server needs to know that it should send + * framebuffer updates in hextile format. Likewise if you change the pixel + * format of the framebuffer, the server must be notified about this as well. + * Call this function to propagate your changes of the local 'client' structure + * over to the server. + * @li Encoding type + * @li RFB protocol extensions announced via pseudo-encodings + * @li Framebuffer pixel format (like RGB vs ARGB) + * @li Remote cursor support + * @param client The client in which the format or encodings have been changed + * @return true if the format or encodings were sent to the server successfully, + * false otherwise + */ +extern rfbBool SetFormatAndEncodings(rfbClient* client); +extern rfbBool SendIncrementalFramebufferUpdateRequest(rfbClient* client); +/** + * Sends a framebuffer update request to the server. A VNC client may request an + * update from the server at any time. You can also specify which portions of + * the screen you want updated. This can be handy if a pointer is at certain + * location and the user pressed a mouse button, for instance. Then you can + * immediately request an update of the region around the pointer from the + * server. + * @note The coordinate system is a left-handed Cartesian coordinate system with + * the Z axis (unused) pointing out of the screen. Alternately you can think of + * it as a right-handed Cartesian coordinate system with the Z axis pointing + * into the screen. The origin is at the upper left corner of the framebuffer. + * @param client The client through which to send the request + * @param x The horizontal position of the update request rectangle + * @param y The vertical position of the update request rectangle + * @param w The width of the update request rectangle + * @param h The height of the update request rectangle + * @param incremental false: server sends rectangle even if nothing changed. + * true: server only sends changed parts of rectangle. + * @return true if the update request was sent successfully, false otherwise + */ +extern rfbBool SendFramebufferUpdateRequest(rfbClient* client, + int x, int y, int w, int h, + rfbBool incremental); +extern rfbBool SendScaleSetting(rfbClient* client,int scaleSetting); +/** + * Sends a pointer event to the server. A pointer event includes a cursor + * location and a button mask. The button mask indicates which buttons on the + * pointing device are pressed. Each button is represented by a bit in the + * button mask. A 1 indicates the button is pressed while a 0 indicates that it + * is not pressed. You may use these pre-defined button masks by ORing them + * together: rfbButton1Mask, rfbButton2Mask, rfbButton3Mask, rfbButton4Mask + * rfbButton5Mask + * @note The cursor location is relative to the client's framebuffer, not the + * client's screen itself. + * @note The coordinate system is a left-handed Cartesian coordinate system with + * the Z axis (unused) pointing out of the screen. Alternately you can think of + * it as a right-handed Cartesian coordinate system with the Z axis pointing + * into the screen. The origin is at the upper left corner of the screen. + * @param client The client through which to send the pointer event + * @param x the horizontal location of the cursor + * @param y the vertical location of the cursor + * @param buttonMask the button mask indicating which buttons are pressed + * @return true if the pointer event was sent successfully, false otherwise + */ +extern rfbBool SendPointerEvent(rfbClient* client,int x, int y, int buttonMask); +/** + * Sends a key event to the server. If your application is not merely a VNC + * viewer (i.e. it controls the server), you'll want to send the keys that the + * user presses to the server. Use this function to do that. + * @param client The client through which to send the key event + * @param key An rfbKeySym defined in rfb/keysym.h + * @param down true if this was a key down event, false otherwise + * @return true if the key event was send successfully, false otherwise + */ +extern rfbBool SendKeyEvent(rfbClient* client,uint32_t key, rfbBool down); +/** + * Places a string on the server's clipboard. Use this function if you want to + * be able to copy and paste between the server and your application. For + * instance, when your application is notified that the user copied some text + * onto the clipboard, you would call this function to synchronize the server's + * clipboard with your local clipboard. + * @param client The client structure through which to send the client cut text + * message + * @param str The string to send (doesn't need to be NULL terminated) + * @param len The length of the string + * @return true if the client cut message was sent successfully, false otherwise + */ +extern rfbBool SendClientCutText(rfbClient* client,char *str, int len); +/** + * Handles messages from the RFB server. You must call this function + * intermittently so LibVNCClient can parse messages from the server. For + * example, if your app has a draw loop, you could place a call to this + * function within that draw loop. + * @note You must call WaitForMessage() before you call this function. + * @param client The client which will handle the RFB server messages + * @return true if the client was able to handle the RFB server messages, false + * otherwise + */ +extern rfbBool HandleRFBServerMessage(rfbClient* client); + +/** + * Sends a text chat message to the server. + * @param client The client through which to send the message + * @param text The text to send + * @return true if the text was sent successfully, false otherwise + */ +extern rfbBool TextChatSend(rfbClient* client, char *text); +/** + * Opens a text chat window on the server. + * @param client The client through which to send the message + * @return true if the window was opened successfully, false otherwise + */ +extern rfbBool TextChatOpen(rfbClient* client); +/** + * Closes the text chat window on the server. + * @param client The client through which to send the message + * @return true if the window was closed successfully, false otherwise + */ +extern rfbBool TextChatClose(rfbClient* client); +extern rfbBool TextChatFinish(rfbClient* client); +extern rfbBool PermitServerInput(rfbClient* client, int enabled); +extern rfbBool SendXvpMsg(rfbClient* client, uint8_t version, uint8_t code); + +extern void PrintPixelFormat(rfbPixelFormat *format); + +extern rfbBool SupportsClient2Server(rfbClient* client, int messageType); +extern rfbBool SupportsServer2Client(rfbClient* client, int messageType); + +/* client data */ + +/** + * Associates a client data tag with the given pointer. LibVNCClient has + * several events to which you can associate your own handlers. These handlers + * have the client structure as one of their parameters. Sometimes, you may want + * to make data from elsewhere in your application available to these handlers + * without using a global variable. To do this, you call + * rfbClientSetClientData() and associate the data with a tag. Then, your + * handler can call rfbClientGetClientData() and get the a pointer to the data + * associated with that tag. + * @param client The client in which to set the client data + * @param tag A unique tag which identifies the data + * @param data A pointer to the data to associate with the tag + */ +void rfbClientSetClientData(rfbClient* client, void* tag, void* data); +/** + * Returns a pointer to the client data associated with the given tag. See the + * the documentation for rfbClientSetClientData() for a discussion of how you + * can use client data. + * @param client The client from which to get the client data + * @param tag The tag which identifies the client data + * @return a pointer to the client data + */ +void* rfbClientGetClientData(rfbClient* client, void* tag); + +/* protocol extensions */ + +typedef struct _rfbClientProtocolExtension { + int* encodings; + /** returns TRUE if the encoding was handled */ + rfbBool (*handleEncoding)(rfbClient* cl, + rfbFramebufferUpdateRectHeader* rect); + /** returns TRUE if it handled the message */ + rfbBool (*handleMessage)(rfbClient* cl, + rfbServerToClientMsg* message); + struct _rfbClientProtocolExtension* next; +} rfbClientProtocolExtension; + +void rfbClientRegisterExtension(rfbClientProtocolExtension* e); + +/* sockets.c */ + +extern rfbBool errorMessageOnReadFailure; + +extern rfbBool ReadFromRFBServer(rfbClient* client, char *out, unsigned int n); +extern rfbBool WriteToRFBServer(rfbClient* client, char *buf, int n); +extern int FindFreeTcpPort(void); +extern int ListenAtTcpPort(int port); +extern int ListenAtTcpPortAndAddress(int port, const char *address); +extern int ConnectClientToTcpAddr(unsigned int host, int port); +extern int ConnectClientToTcpAddr6(const char *hostname, int port); +extern int ConnectClientToUnixSock(const char *sockFile); +extern int AcceptTcpConnection(int listenSock); +extern rfbBool SetNonBlocking(int sock); +extern rfbBool SetDSCP(int sock, int dscp); + +extern rfbBool StringToIPAddr(const char *str, unsigned int *addr); +extern rfbBool SameMachine(int sock); +/** + * Waits for an RFB message to arrive from the server. Before handling a message + * with HandleRFBServerMessage(), you must wait for your client to receive one. + * This function blocks until a message is received. You may specify a timeout + * in microseconds. Once this number of microseconds have elapsed, the function + * will return. + * @param client The client to cause to wait until a message is received + * @param usecs The timeout in microseconds + * @return the return value of the underlying select() call + */ +extern int WaitForMessage(rfbClient* client,unsigned int usecs); + +/* vncviewer.c */ +/** + * Allocates and returns a pointer to an rfbClient structure. This will probably + * be the first LibVNCClient function your client code calls. Most libVNCClient + * functions operate on an rfbClient structure, and this function allocates + * memory for that structure. When you're done with the rfbClient structure + * pointer this function returns, you should free the memory rfbGetClient() + * allocated by calling rfbClientCleanup(). + * + * A pixel is one dot on the screen. The number of bytes in a pixel will depend + * on the number of samples in that pixel and the number of bits in each sample. + * A sample represents one of the primary colors in a color model. The RGB + * color model uses red, green, and blue samples respectively. Suppose you + * wanted to use 16-bit RGB color: You would have three samples per pixel (one + * for each primary color), five bits per sample (the quotient of 16 RGB bits + * divided by three samples), and two bytes per pixel (the smallest multiple of + * eight bits in which the 16-bit pixel will fit). If you wanted 32-bit RGB + * color, you would have three samples per pixel again, eight bits per sample + * (since that's how 32-bit color is defined), and four bytes per pixel (the + * smallest multiple of eight bits in which the 32-bit pixel will fit. + * @param bitsPerSample The number of bits in a sample + * @param samplesPerPixel The number of samples in a pixel + * @param bytesPerPixel The number of bytes in a pixel + * @return a pointer to the allocated rfbClient structure + */ +rfbClient* rfbGetClient(int bitsPerSample,int samplesPerPixel,int bytesPerPixel); +/** + * Initializes the client. The format is {PROGRAM_NAME, [OPTIONS]..., HOST}. This + * function does not initialize the program name if the rfbClient's program + * name is set already. The options are as follows: + * + * + * + * + * + * + * + * + * + * + *
OptionDescription
-listenListen for incoming connections.
-listennoforkListen for incoming connections without forking. + *
-playSet this client to replay a previously recorded session.
-encodingsSet the encodings to use. The next item in the + * argv array is the encodings string, consisting of comma separated encodings like 'tight,ultra,raw'.
-compressSet the compression level. The next item in the + * argv array is the compression level as an integer. Ranges from 0 (lowest) to 9 (highest). + *
-scaleSet the scaling level. The next item in the + * argv array is the scaling level as an integer. The screen will be scaled down by this factor.
-qosdscpSet the Quality of Service Differentiated Services + * Code Point (QoS DSCP). The next item in the argv array is the code point as + * an integer.
-repeaterdestSet a VNC repeater address. The next item in the argv array is + * the repeater's address as a string.
+ * + * The host may include a port number (delimited by a ':'). + * @param client The client to initialize + * @param argc The number of arguments to the initializer + * @param argv The arguments to the initializer as an array of NULL terminated + * strings + * @return true if the client was initialized successfully, false otherwise. + */ +rfbBool rfbInitClient(rfbClient* client,int* argc,char** argv); +/** + * Cleans up the client structure and releases the memory allocated for it. You + * should call this when you're done with the rfbClient structure that you + * allocated with rfbGetClient(). + * @note rfbClientCleanup() does not touch client->frameBuffer. + * @param client The client to clean up + */ +void rfbClientCleanup(rfbClient* client); + +#if(defined __cplusplus) +} +#endif + +/** + * @} + */ + +/** + @page libvncclient_doc LibVNCClient Documentation + @section example_code Example Code + See SDLvncviewer.c for a rather complete client example. +*/ + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/rfb/rfbconfig.h b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbconfig.h new file mode 100644 index 0000000..337181a --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbconfig.h @@ -0,0 +1,573 @@ +#ifndef _RFB_RFBCONFIG_H +#define _RFB_RFBCONFIG_H 1 + +/* rfb/rfbconfig.h. Generated automatically at end of configure. */ +/* rfbconfig.h. Generated from rfbconfig.h.in by configure. */ +/* rfbconfig.h.in. Generated from configure.ac by autoheader. */ + +/* Define if building universal (internal helper macro) */ +/* #undef LIBVNCSERVER_AC_APPLE_UNIVERSAL_BUILD */ + +/* Enable 24 bit per pixel in native framebuffer */ +#ifndef LIBVNCSERVER_ALLOW24BPP +#define LIBVNCSERVER_ALLOW24BPP 1 +#endif + +/* work around when write() returns ENOENT but does not mean it */ +/* #undef LIBVNCSERVER_ENOENT_WORKAROUND */ + +/* Use ffmpeg (for vnc2mpg) */ +/* #undef LIBVNCSERVER_FFMPEG */ + +/* Android host system detected */ +/* #undef LIBVNCSERVER_HAVE_ANDROID */ + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_ARPA_INET_H +#define LIBVNCSERVER_HAVE_ARPA_INET_H 1 +#endif + +/* Avahi/mDNS client build environment present */ +/* #undef LIBVNCSERVER_HAVE_AVAHI */ + +/* Define to 1 if you have the `crypt' function. */ +/* #undef LIBVNCSERVER_HAVE_CRYPT */ + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_DLFCN_H +#define LIBVNCSERVER_HAVE_DLFCN_H 1 +#endif + +/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */ +/* #undef LIBVNCSERVER_HAVE_DOPRNT */ + +/* DPMS extension build environment present */ +/* #undef LIBVNCSERVER_HAVE_DPMS */ + +/* FBPM extension build environment present */ +/* #undef LIBVNCSERVER_HAVE_FBPM */ + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_FCNTL_H +#define LIBVNCSERVER_HAVE_FCNTL_H 1 +#endif + +/* Define to 1 if you have the `fork' function. */ +#ifndef LIBVNCSERVER_HAVE_FORK +#define LIBVNCSERVER_HAVE_FORK 1 +#endif + +/* Define to 1 if you have the `ftime' function. */ +#ifndef LIBVNCSERVER_HAVE_FTIME +#define LIBVNCSERVER_HAVE_FTIME 1 +#endif + +/* Define to 1 if you have the `geteuid' function. */ +/* #undef LIBVNCSERVER_HAVE_GETEUID */ + +/* Define to 1 if you have the `gethostbyname' function. */ +#ifndef LIBVNCSERVER_HAVE_GETHOSTBYNAME +#define LIBVNCSERVER_HAVE_GETHOSTBYNAME 1 +#endif + +/* Define to 1 if you have the `gethostname' function. */ +#ifndef LIBVNCSERVER_HAVE_GETHOSTNAME +#define LIBVNCSERVER_HAVE_GETHOSTNAME 1 +#endif + +/* Define to 1 if you have the `getpwnam' function. */ +/* #undef LIBVNCSERVER_HAVE_GETPWNAM */ + +/* Define to 1 if you have the `getpwuid' function. */ +/* #undef LIBVNCSERVER_HAVE_GETPWUID */ + +/* Define to 1 if you have the `getspnam' function. */ +/* #undef LIBVNCSERVER_HAVE_GETSPNAM */ + +/* Define to 1 if you have the `gettimeofday' function. */ +#ifndef LIBVNCSERVER_HAVE_GETTIMEOFDAY +#define LIBVNCSERVER_HAVE_GETTIMEOFDAY 1 +#endif + +/* Define to 1 if you have the `getuid' function. */ +/* #undef LIBVNCSERVER_HAVE_GETUID */ + +/* GnuTLS library present */ +#ifndef LIBVNCSERVER_HAVE_GNUTLS +#define LIBVNCSERVER_HAVE_GNUTLS 1 +#endif + +/* Define to 1 if you have the `grantpt' function. */ +/* #undef LIBVNCSERVER_HAVE_GRANTPT */ + +/* Define to 1 if you have the `inet_ntoa' function. */ +#ifndef LIBVNCSERVER_HAVE_INET_NTOA +#define LIBVNCSERVER_HAVE_INET_NTOA 1 +#endif + +/* Define to 1 if you have the `initgroups' function. */ +/* #undef LIBVNCSERVER_HAVE_INITGROUPS */ + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_INTTYPES_H +#define LIBVNCSERVER_HAVE_INTTYPES_H 1 +#endif + +/* IRIX XReadDisplay available */ +/* #undef LIBVNCSERVER_HAVE_IRIX_XREADDISPLAY */ + +/* libcrypt library present */ +#ifndef LIBVNCSERVER_HAVE_LIBCRYPT +#define LIBVNCSERVER_HAVE_LIBCRYPT 1 +#endif + +/* openssl libcrypto library present */ +#ifndef LIBVNCSERVER_HAVE_LIBCRYPTO +#define LIBVNCSERVER_HAVE_LIBCRYPTO 1 +#endif + +/* Define to 1 if you have the `cygipc' library (-lcygipc). */ +/* #undef LIBVNCSERVER_HAVE_LIBCYGIPC */ + +/* libjpeg support enabled */ +#ifndef LIBVNCSERVER_HAVE_LIBJPEG +#define LIBVNCSERVER_HAVE_LIBJPEG 1 +#endif + +/* Define to 1 if you have the `nsl' library (-lnsl). */ +#ifndef LIBVNCSERVER_HAVE_LIBNSL +#define LIBVNCSERVER_HAVE_LIBNSL 1 +#endif + +/* Define to 1 if you have the `png' library (-lpng). */ +#ifndef LIBVNCSERVER_HAVE_LIBPNG +#define LIBVNCSERVER_HAVE_LIBPNG 1 +#endif + +/* Define to 1 if you have the `pthread' library (-lpthread). */ +#ifndef LIBVNCSERVER_HAVE_LIBPTHREAD +#define LIBVNCSERVER_HAVE_LIBPTHREAD 1 +#endif + +/* Define to 1 if you have the `socket' library (-lsocket). */ +/* #undef LIBVNCSERVER_HAVE_LIBSOCKET */ + +/* openssl libssl library present */ +#ifndef LIBVNCSERVER_HAVE_LIBSSL +#define LIBVNCSERVER_HAVE_LIBSSL 1 +#endif + +/* XDAMAGE extension build environment present */ +/* #undef LIBVNCSERVER_HAVE_LIBXDAMAGE */ + +/* XFIXES extension build environment present */ +/* #undef LIBVNCSERVER_HAVE_LIBXFIXES */ + +/* XINERAMA extension build environment present */ +/* #undef LIBVNCSERVER_HAVE_LIBXINERAMA */ + +/* XRANDR extension build environment present */ +/* #undef LIBVNCSERVER_HAVE_LIBXRANDR */ + +/* DEC-XTRAP extension build environment present */ +/* #undef LIBVNCSERVER_HAVE_LIBXTRAP */ + +/* Define to 1 if you have the `z' library (-lz). */ +#ifndef LIBVNCSERVER_HAVE_LIBZ +#define LIBVNCSERVER_HAVE_LIBZ 1 +#endif + +/* linux fb device build environment present */ +/* #undef LIBVNCSERVER_HAVE_LINUX_FB_H */ + +/* linux/input.h present */ +/* #undef LIBVNCSERVER_HAVE_LINUX_INPUT_H */ + +/* linux uinput device build environment present */ +/* #undef LIBVNCSERVER_HAVE_LINUX_UINPUT_H */ + +/* video4linux build environment present */ +/* #undef LIBVNCSERVER_HAVE_LINUX_VIDEODEV_H */ + +/* build MacOS X native display support */ +/* #undef LIBVNCSERVER_HAVE_MACOSX_NATIVE_DISPLAY */ + +/* MacOS X OpenGL present */ +/* #undef LIBVNCSERVER_HAVE_MACOSX_OPENGL_H */ + +/* Define to 1 if you have the `memmove' function. */ +#ifndef LIBVNCSERVER_HAVE_MEMMOVE +#define LIBVNCSERVER_HAVE_MEMMOVE 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_MEMORY_H +#define LIBVNCSERVER_HAVE_MEMORY_H 1 +#endif + +/* Define to 1 if you have the `memset' function. */ +#ifndef LIBVNCSERVER_HAVE_MEMSET +#define LIBVNCSERVER_HAVE_MEMSET 1 +#endif + +/* Define to 1 if you have the `mkfifo' function. */ +#ifndef LIBVNCSERVER_HAVE_MKFIFO +#define LIBVNCSERVER_HAVE_MKFIFO 1 +#endif + +/* Define to 1 if you have the `mmap' function. */ +#ifndef LIBVNCSERVER_HAVE_MMAP +#define LIBVNCSERVER_HAVE_MMAP 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_NETDB_H +#define LIBVNCSERVER_HAVE_NETDB_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_NETINET_IN_H +#define LIBVNCSERVER_HAVE_NETINET_IN_H 1 +#endif + +/* Define to 1 if you have the header file. */ +/* #undef LIBVNCSERVER_HAVE_PWD_H */ + +/* RECORD extension build environment present */ +/* #undef LIBVNCSERVER_HAVE_RECORD */ + +/* Define to 1 if you have the `select' function. */ +#ifndef LIBVNCSERVER_HAVE_SELECT +#define LIBVNCSERVER_HAVE_SELECT 1 +#endif + +/* Define to 1 if you have the `setegid' function. */ +/* #undef LIBVNCSERVER_HAVE_SETEGID */ + +/* Define to 1 if you have the `seteuid' function. */ +/* #undef LIBVNCSERVER_HAVE_SETEUID */ + +/* Define to 1 if you have the `setgid' function. */ +/* #undef LIBVNCSERVER_HAVE_SETGID */ + +/* Define to 1 if you have the `setpgrp' function. */ +/* #undef LIBVNCSERVER_HAVE_SETPGRP */ + +/* Define to 1 if you have the `setsid' function. */ +/* #undef LIBVNCSERVER_HAVE_SETSID */ + +/* Define to 1 if you have the `setuid' function. */ +/* #undef LIBVNCSERVER_HAVE_SETUID */ + +/* Define to 1 if you have the `setutxent' function. */ +/* #undef LIBVNCSERVER_HAVE_SETUTXENT */ + +/* Define to 1 if you have the `shmat' function. */ +/* #undef LIBVNCSERVER_HAVE_SHMAT */ + +/* Define to 1 if you have the `socket' function. */ +#ifndef LIBVNCSERVER_HAVE_SOCKET +#define LIBVNCSERVER_HAVE_SOCKET 1 +#endif + +/* Solaris XReadScreen available */ +/* #undef LIBVNCSERVER_HAVE_SOLARIS_XREADSCREEN */ + +/* Define to 1 if `stat' has the bug that it succeeds when given the + zero-length file name argument. */ +/* #undef LIBVNCSERVER_HAVE_STAT_EMPTY_STRING_BUG */ + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_STDINT_H +#define LIBVNCSERVER_HAVE_STDINT_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_STDLIB_H +#define LIBVNCSERVER_HAVE_STDLIB_H 1 +#endif + +/* Define to 1 if you have the `strchr' function. */ +#ifndef LIBVNCSERVER_HAVE_STRCHR +#define LIBVNCSERVER_HAVE_STRCHR 1 +#endif + +/* Define to 1 if you have the `strcspn' function. */ +#ifndef LIBVNCSERVER_HAVE_STRCSPN +#define LIBVNCSERVER_HAVE_STRCSPN 1 +#endif + +/* Define to 1 if you have the `strdup' function. */ +#ifndef LIBVNCSERVER_HAVE_STRDUP +#define LIBVNCSERVER_HAVE_STRDUP 1 +#endif + +/* Define to 1 if you have the `strerror' function. */ +#ifndef LIBVNCSERVER_HAVE_STRERROR +#define LIBVNCSERVER_HAVE_STRERROR 1 +#endif + +/* Define to 1 if you have the `strftime' function. */ +#ifndef LIBVNCSERVER_HAVE_STRFTIME +#define LIBVNCSERVER_HAVE_STRFTIME 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_STRINGS_H +#define LIBVNCSERVER_HAVE_STRINGS_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_STRING_H +#define LIBVNCSERVER_HAVE_STRING_H 1 +#endif + +/* Define to 1 if you have the `strstr' function. */ +#ifndef LIBVNCSERVER_HAVE_STRSTR +#define LIBVNCSERVER_HAVE_STRSTR 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_SYSLOG_H +#define LIBVNCSERVER_HAVE_SYSLOG_H 1 +#endif + +/* Use the system libvncserver build environment for x11vnc. */ +/* #undef LIBVNCSERVER_HAVE_SYSTEM_LIBVNCSERVER */ + +/* Define to 1 if you have the header file. */ +/* #undef LIBVNCSERVER_HAVE_SYS_IOCTL_H */ + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_SYS_SOCKET_H +#define LIBVNCSERVER_HAVE_SYS_SOCKET_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_SYS_STAT_H +#define LIBVNCSERVER_HAVE_SYS_STAT_H 1 +#endif + +/* Define to 1 if you have the header file. */ +/* #undef LIBVNCSERVER_HAVE_SYS_STROPTS_H */ + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_SYS_TIMEB_H +#define LIBVNCSERVER_HAVE_SYS_TIMEB_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_SYS_TIME_H +#define LIBVNCSERVER_HAVE_SYS_TIME_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_SYS_TYPES_H +#define LIBVNCSERVER_HAVE_SYS_TYPES_H 1 +#endif + +/* Define to 1 if you have that is POSIX.1 compatible. */ +#ifndef LIBVNCSERVER_HAVE_SYS_WAIT_H +#define LIBVNCSERVER_HAVE_SYS_WAIT_H 1 +#endif + +/* Define to 1 if you have the header file. */ +/* #undef LIBVNCSERVER_HAVE_TERMIOS_H */ + +/* Define to 1 if compiler supports __thread */ +#ifndef LIBVNCSERVER_HAVE_TLS +#define LIBVNCSERVER_HAVE_TLS 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef LIBVNCSERVER_HAVE_UNISTD_H +#define LIBVNCSERVER_HAVE_UNISTD_H 1 +#endif + +/* Define to 1 if you have the header file. */ +/* #undef LIBVNCSERVER_HAVE_UTMPX_H */ + +/* Define to 1 if you have the `vfork' function. */ +#ifndef LIBVNCSERVER_HAVE_VFORK +#define LIBVNCSERVER_HAVE_VFORK 1 +#endif + +/* Define to 1 if you have the header file. */ +/* #undef LIBVNCSERVER_HAVE_VFORK_H */ + +/* Define to 1 if you have the `vprintf' function. */ +#ifndef LIBVNCSERVER_HAVE_VPRINTF +#define LIBVNCSERVER_HAVE_VPRINTF 1 +#endif + +/* Define to 1 if you have the `waitpid' function. */ +/* #undef LIBVNCSERVER_HAVE_WAITPID */ + +/* Define to 1 if `fork' works. */ +#ifndef LIBVNCSERVER_HAVE_WORKING_FORK +#define LIBVNCSERVER_HAVE_WORKING_FORK 1 +#endif + +/* Define to 1 if `vfork' works. */ +#ifndef LIBVNCSERVER_HAVE_WORKING_VFORK +#define LIBVNCSERVER_HAVE_WORKING_VFORK 1 +#endif + +/* Define to 1 if you have the header file. */ +/* #undef LIBVNCSERVER_HAVE_WS2TCPIP_H */ + +/* X11 build environment present */ +#ifndef LIBVNCSERVER_HAVE_X11 +#define LIBVNCSERVER_HAVE_X11 1 +#endif + +/* open ssl X509_print_ex_fp available */ +/* #undef LIBVNCSERVER_HAVE_X509_PRINT_EX_FP */ + +/* XKEYBOARD extension build environment present */ +/* #undef LIBVNCSERVER_HAVE_XKEYBOARD */ + +/* MIT-SHM extension build environment present */ +/* #undef LIBVNCSERVER_HAVE_XSHM */ + +/* XTEST extension build environment present */ +/* #undef LIBVNCSERVER_HAVE_XTEST */ + +/* XTEST extension has XTestGrabControl */ +/* #undef LIBVNCSERVER_HAVE_XTESTGRABCONTROL */ + +/* Enable IPv6 support */ +#ifndef LIBVNCSERVER_IPv6 +#define LIBVNCSERVER_IPv6 1 +#endif + +/* Define to 1 if `lstat' dereferences a symlink specified with a trailing + slash. */ +#ifndef LIBVNCSERVER_LSTAT_FOLLOWS_SLASHED_SYMLINK +#define LIBVNCSERVER_LSTAT_FOLLOWS_SLASHED_SYMLINK 1 +#endif + +/* Need a typedef for in_addr_t */ +/* #undef LIBVNCSERVER_NEED_INADDR_T */ + +/* Define to 1 if your C compiler doesn't accept -c and -o together. */ +/* #undef LIBVNCSERVER_NO_MINUS_C_MINUS_O */ + +/* Name of package */ +#ifndef LIBVNCSERVER_PACKAGE +#define LIBVNCSERVER_PACKAGE "LibVNCServer" +#endif + +/* Define to the address where bug reports for this package should be sent. */ +#ifndef LIBVNCSERVER_PACKAGE_BUGREPORT +#define LIBVNCSERVER_PACKAGE_BUGREPORT "http://sourceforge.net/projects/libvncserver" +#endif + +/* Define to the full name of this package. */ +#ifndef LIBVNCSERVER_PACKAGE_NAME +#define LIBVNCSERVER_PACKAGE_NAME "LibVNCServer" +#endif + +/* Define to the full name and version of this package. */ +#ifndef LIBVNCSERVER_PACKAGE_STRING +#define LIBVNCSERVER_PACKAGE_STRING "LibVNCServer 0.9.9" +#endif + +/* Define to the one symbol short name of this package. */ +#ifndef LIBVNCSERVER_PACKAGE_TARNAME +#define LIBVNCSERVER_PACKAGE_TARNAME "libvncserver" +#endif + +/* Define to the home page for this package. */ +#ifndef LIBVNCSERVER_PACKAGE_URL +#define LIBVNCSERVER_PACKAGE_URL "" +#endif + +/* Define to the version of this package. */ +#ifndef LIBVNCSERVER_PACKAGE_VERSION +#define LIBVNCSERVER_PACKAGE_VERSION "0.9.9" +#endif + +/* The number of bytes in type char */ +/* #undef LIBVNCSERVER_SIZEOF_CHAR */ + +/* The number of bytes in type int */ +/* #undef LIBVNCSERVER_SIZEOF_INT */ + +/* The number of bytes in type long */ +/* #undef LIBVNCSERVER_SIZEOF_LONG */ + +/* The number of bytes in type short */ +/* #undef LIBVNCSERVER_SIZEOF_SHORT */ + +/* The number of bytes in type void* */ +/* #undef LIBVNCSERVER_SIZEOF_VOIDP */ + +/* Define to 1 if you have the ANSI C header files. */ +#ifndef LIBVNCSERVER_STDC_HEADERS +#define LIBVNCSERVER_STDC_HEADERS 1 +#endif + +/* Define to 1 if you can safely include both and . */ +#ifndef LIBVNCSERVER_TIME_WITH_SYS_TIME +#define LIBVNCSERVER_TIME_WITH_SYS_TIME 1 +#endif + +/* Version number of package */ +#ifndef LIBVNCSERVER_VERSION +#define LIBVNCSERVER_VERSION "0.9.9" +#endif + +/* Enable support for libgcrypt in libvncclient */ +#ifndef LIBVNCSERVER_WITH_CLIENT_GCRYPT +#define LIBVNCSERVER_WITH_CLIENT_GCRYPT 1 +#endif + +/* Disable TightVNCFileTransfer protocol */ +#ifndef LIBVNCSERVER_WITH_TIGHTVNC_FILETRANSFER +#define LIBVNCSERVER_WITH_TIGHTVNC_FILETRANSFER 1 +#endif + +/* Disable WebSockets support */ +#ifndef LIBVNCSERVER_WITH_WEBSOCKETS +#define LIBVNCSERVER_WITH_WEBSOCKETS 1 +#endif + +/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most + significant byte first (like Motorola and SPARC, unlike Intel). */ +#if defined AC_APPLE_UNIVERSAL_BUILD +# if defined __BIG_ENDIAN__ +# define WORDS_BIGENDIAN 1 +# endif +#else +# ifndef WORDS_BIGENDIAN +/* # undef WORDS_BIGENDIAN */ +# endif +#endif + +/* Define to 1 if the X Window System is missing or not being used. */ +/* #undef LIBVNCSERVER_X_DISPLAY_MISSING */ + +/* Define to empty if `const' does not conform to ANSI C. */ +/* #undef const */ + +/* Define to `__inline__' or `__inline' if that's what the C compiler + calls it, or to nothing if 'inline' is not supported under any name. */ +#ifndef __cplusplus +/* #undef inline */ +#endif + +/* Define to `int' if does not define. */ +/* #undef pid_t */ + +/* Define to `unsigned int' if does not define. */ +/* #undef size_t */ + +/* The type for socklen */ +/* #undef socklen_t */ + +/* Define as `fork' if `vfork' does not work. */ +/* #undef vfork */ + +/* once: _RFB_RFBCONFIG_H */ +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/rfb/rfbconfig.h.cmake b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbconfig.h.cmake new file mode 100644 index 0000000..b095948 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbconfig.h.cmake @@ -0,0 +1,101 @@ +#ifndef _RFB_RFBCONFIG_H +#cmakedefine _RFB_RFBCONFIG_H 1 + +/* rfb/rfbconfig.h. Generated automatically by cmake. */ + +/* Enable 24 bit per pixel in native framebuffer */ +#cmakedefine LIBVNCSERVER_ALLOW24BPP 1 + +/* work around when write() returns ENOENT but does not mean it */ +#cmakedefine LIBVNCSERVER_ENOENT_WORKAROUND 1 + +/* Define to 1 if you have the header file. */ +#cmakedefine LIBVNCSERVER_HAVE_FCNTL_H 1 + +/* Define to 1 if you have the `gettimeofday' function. */ +#cmakedefine LIBVNCSERVER_HAVE_GETTIMEOFDAY 1 + +/* Define to 1 if you have the `jpeg' library (-ljpeg). */ +#cmakedefine LIBVNCSERVER_HAVE_LIBJPEG 1 + +/* Define if you have the `png' library (-lpng). */ +#cmakedefine LIBVNCSERVER_HAVE_LIBPNG 1 + +/* Define to 1 if you have the `pthread' library (-lpthread). */ +#cmakedefine LIBVNCSERVER_HAVE_LIBPTHREAD 1 + +/* Define to 1 if you have the `z' library (-lz). */ +#cmakedefine LIBVNCSERVER_HAVE_LIBZ 1 + +/* Define to 1 if you have the header file. */ +#cmakedefine LIBVNCSERVER_HAVE_NETINET_IN_H 1 + +/* Define to 1 if you have the header file. */ +#cmakedefine LIBVNCSERVER_HAVE_SYS_SOCKET_H 1 + +/* Define to 1 if you have the header file. */ +#cmakedefine LIBVNCSERVER_HAVE_SYS_STAT_H 1 + +/* Define to 1 if you have the header file. */ +#cmakedefine LIBVNCSERVER_HAVE_SYS_TIME_H 1 + +/* Define to 1 if you have the header file. */ +#cmakedefine LIBVNCSERVER_HAVE_SYS_TYPES_H 1 + +/* Define to 1 if you have that is POSIX.1 compatible. */ +#cmakedefine LIBVNCSERVER_HAVE_SYS_WAIT_H 1 + +/* Define to 1 if you have the header file. */ +#cmakedefine LIBVNCSERVER_HAVE_UNISTD_H 1 + +/* Need a typedef for in_addr_t */ +#cmakedefine LIBVNCSERVER_NEED_INADDR_T 1 + +/* Define to the full name and version of this package. */ +#define LIBVNCSERVER_PACKAGE_STRING "@FULL_PACKAGE_NAME@ @PACKAGE_VERSION@" + +/* Define to the version of this package. */ +#define LIBVNCSERVER_PACKAGE_VERSION "@PACKAGE_VERSION@" + +/* Define to 1 if libgcrypt is present */ +#cmakedefine LIBVNCSERVER_WITH_CLIENT_GCRYPT 1 + +/* Define to 1 if GnuTLS is present */ +#cmakedefine LIBVNCSERVER_WITH_CLIENT_TLS 1 + +/* Define to 1 to build with websockets */ +#cmakedefine LIBVNCSERVER_WITH_WEBSOCKETS 1 + +/* Define to 1 if your processor stores words with the most significant byte + first (like Motorola and SPARC, unlike Intel and VAX). */ +#cmakedefine LIBVNCSERVER_WORDS_BIGENDIAN 1 + +/* Define to empty if `const' does not conform to ANSI C. */ +//#cmakedefine const @CMAKE_CONST@ + +/* Define to `__inline__' or `__inline' if that's what the C compiler + calls it, or to nothing if 'inline' is not supported under any name. */ +//#ifndef __cplusplus +//#cmakedefine inline @CMAKE_INLINE@ +//#endif + +/* Define to `int' if does not define. */ +#cmakedefine HAVE_LIBVNCSERVER_PID_T 1 +#ifndef HAVE_LIBVNCSERVER_PID_T +typedef int pid_t; +#endif + +/* The type for size_t */ +#cmakedefine HAVE_LIBVNCSERVER_SIZE_T 1 +#ifndef HAVE_LIBVNCSERVER_SIZE_T +typedef int size_t; +#endif + +/* The type for socklen */ +#cmakedefine HAVE_LIBVNCSERVER_SOCKLEN_T 1 +#ifndef HAVE_LIBVNCSERVER_SOCKLEN_T +typedef int socklen_t; +#endif + +/* once: _RFB_RFBCONFIG_H */ +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/rfb/rfbint.h b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbint.h new file mode 100644 index 0000000..1737c98 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbint.h @@ -0,0 +1,17 @@ +#ifndef _RFB_RFBINT_H +#define _RFB_RFBINT_H 1 +#ifndef _GENERATED_STDINT_H +#define _GENERATED_STDINT_H "LibVNCServer 0.9.9" +/* generated using a gnu compiler version gcc (Debian 4.4.5-8) 4.4.5 Copyright (C) 2010 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. */ + +#include + + +/* system headers have good uint64_t */ +#ifndef _HAVE_UINT64_T +#define _HAVE_UINT64_T +#endif + + /* once */ +#endif +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/rfb/rfbint.h.cmake b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbint.h.cmake new file mode 100644 index 0000000..17de6cd --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbint.h.cmake @@ -0,0 +1,4 @@ +#ifndef _RFB_RFBINT_H +#define _RFB_RFBINT_H 1 +/* empty ... */ +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/rfb/rfbproto.h b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbproto.h new file mode 100644 index 0000000..acb2e7b --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbproto.h @@ -0,0 +1,1459 @@ +#ifndef RFBPROTO_H +#define RFBPROTO_H + +/** + @mainpage + @li @ref libvncserver_api + @li @ref libvncserver_doc + + + @li @ref libvncclient_api + @li @ref libvncclient_doc + +*/ + +/* + * Copyright (C) 2009-2010 D. R. Commander. All Rights Reserved. + * Copyright (C) 2005 Rohit Kumar, Johannes E. Schindelin + * Copyright (C) 2004-2008 Sun Microsystems, Inc. All Rights Reserved. + * Copyright (C) 2000-2002 Constantin Kaplinsky. All Rights Reserved. + * Copyright (C) 2000 Tridia Corporation. All Rights Reserved. + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +/* + * rfbproto.h - header file for the RFB protocol version 3.3 + * + * Uses types CARD for an n-bit unsigned integer, INT for an n-bit signed + * integer (for n = 8, 16 and 32). + * + * All multiple byte integers are in big endian (network) order (most + * significant byte first). Unless noted otherwise there is no special + * alignment of protocol structures. + * + * + * Once the initial handshaking is done, all messages start with a type byte, + * (usually) followed by message-specific data. The order of definitions in + * this file is as follows: + * + * (1) Structures used in several types of message. + * (2) Structures used in the initial handshaking. + * (3) Message types. + * (4) Encoding types. + * (5) For each message type, the form of the data following the type byte. + * Sometimes this is defined by a single structure but the more complex + * messages have to be explained by comments. + */ + + +#if defined(WIN32) && !defined(__MINGW32__) +#define LIBVNCSERVER_WORDS_BIGENDIAN +#define rfbBool int +#include +#include +#undef SOCKET +#define SOCKET int +#else +#include +#include +#endif + +#ifdef LIBVNCSERVER_HAVE_LIBZ +#include +#ifdef __CHECKER__ +#undef Z_NULL +#define Z_NULL NULL +#endif +#endif + +/* some autotool versions do not properly prefix + WORDS_BIGENDIAN, so do that manually */ +#ifdef WORDS_BIGENDIAN +#define LIBVNCSERVER_WORDS_BIGENDIAN +#endif + +/* MS compilers don't have strncasecmp */ +#ifdef _MSC_VER +#define strncasecmp _strnicmp +#endif + +#if !defined(WIN32) || defined(__MINGW32__) +#define max(a,b) (((a)>(b))?(a):(b)) +#ifdef LIBVNCSERVER_HAVE_SYS_TIME_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_NETINET_IN_H +#include +#endif +#define SOCKET int +typedef int8_t rfbBool; +#undef FALSE +#define FALSE 0 +#undef TRUE +#define TRUE -1 +#endif + +typedef uint32_t rfbKeySym; +typedef uint32_t rfbPixel; + +#ifdef LIBVNCSERVER_NEED_INADDR_T +typedef uint32_t in_addr_t; +#endif + +#ifndef INADDR_NONE +#define INADDR_NONE ((in_addr_t) 0xffffffff) +#endif + +#define MAX_ENCODINGS 21 + +/***************************************************************************** + * + * Structures used in several messages + * + *****************************************************************************/ + +/*----------------------------------------------------------------------------- + * Structure used to specify a rectangle. This structure is a multiple of 4 + * bytes so that it can be interspersed with 32-bit pixel data without + * affecting alignment. + */ + +typedef struct { + uint16_t x; + uint16_t y; + uint16_t w; + uint16_t h; +} rfbRectangle; + +#define sz_rfbRectangle 8 + + +/*----------------------------------------------------------------------------- + * Structure used to specify pixel format. + */ + +typedef struct { + + uint8_t bitsPerPixel; /* 8,16,32 only */ + + uint8_t depth; /* 8 to 32 */ + + uint8_t bigEndian; /* True if multi-byte pixels are interpreted + as big endian, or if single-bit-per-pixel + has most significant bit of the byte + corresponding to first (leftmost) pixel. Of + course this is meaningless for 8 bits/pix */ + + uint8_t trueColour; /* If false then we need a "colour map" to + convert pixels to RGB. If true, xxxMax and + xxxShift specify bits used for red, green + and blue */ + + /* the following fields are only meaningful if trueColour is true */ + + uint16_t redMax; /* maximum red value (= 2^n - 1 where n is the + number of bits used for red). Note this + value is always in big endian order. */ + + uint16_t greenMax; /* similar for green */ + + uint16_t blueMax; /* and blue */ + + uint8_t redShift; /* number of shifts needed to get the red + value in a pixel to the least significant + bit. To find the red value from a given + pixel, do the following: + 1) Swap pixel value according to bigEndian + (e.g. if bigEndian is false and host byte + order is big endian, then swap). + 2) Shift right by redShift. + 3) AND with redMax (in host byte order). + 4) You now have the red value between 0 and + redMax. */ + + uint8_t greenShift; /* similar for green */ + + uint8_t blueShift; /* and blue */ + + uint8_t pad1; + uint16_t pad2; + +} rfbPixelFormat; + +#define sz_rfbPixelFormat 16 + +/* UltraVNC: Color settings values */ +#define rfbPFFullColors 0 +#define rfbPF256Colors 1 +#define rfbPF64Colors 2 +#define rfbPF8Colors 3 +#define rfbPF8GreyColors 4 +#define rfbPF4GreyColors 5 +#define rfbPF2GreyColors 6 + + +/***************************************************************************** + * + * Initial handshaking messages + * + *****************************************************************************/ + +/*----------------------------------------------------------------------------- + * Protocol Version + * + * The server always sends 12 bytes to start which identifies the latest RFB + * protocol version number which it supports. These bytes are interpreted + * as a string of 12 ASCII characters in the format "RFB xxx.yyy\n" where + * xxx and yyy are the major and minor version numbers (for version 3.3 + * this is "RFB 003.003\n"). + * + * The client then replies with a similar 12-byte message giving the version + * number of the protocol which should actually be used (which may be different + * to that quoted by the server). + * + * It is intended that both clients and servers may provide some level of + * backwards compatibility by this mechanism. Servers in particular should + * attempt to provide backwards compatibility, and even forwards compatibility + * to some extent. For example if a client demands version 3.1 of the + * protocol, a 3.0 server can probably assume that by ignoring requests for + * encoding types it doesn't understand, everything will still work OK. This + * will probably not be the case for changes in the major version number. + * + * The format string below can be used in sprintf or sscanf to generate or + * decode the version string respectively. + */ + +#define rfbProtocolVersionFormat "RFB %03d.%03d\n" +#define rfbProtocolMajorVersion 3 +#define rfbProtocolMinorVersion 8 +/* UltraVNC Viewer examines rfbProtocolMinorVersion number (4, and 6) + * to identify if the server supports File Transfer + */ + +typedef char rfbProtocolVersionMsg[13]; /* allow extra byte for null */ + +#define sz_rfbProtocolVersionMsg 12 + +/* + * Negotiation of the security type (protocol version 3.7) + * + * Once the protocol version has been decided, the server either sends a list + * of supported security types, or informs the client about an error (when the + * number of security types is 0). Security type rfbSecTypeTight is used to + * enable TightVNC-specific protocol extensions. The value rfbSecTypeVncAuth + * stands for classic VNC authentication. + * + * The client selects a particular security type from the list provided by the + * server. + */ + +#define rfbSecTypeInvalid 0 +#define rfbSecTypeNone 1 +#define rfbSecTypeVncAuth 2 + + +/*----------------------------------------------------------------------------- + * Authentication + * + * Once the protocol version has been decided, the server then sends a 32-bit + * word indicating whether any authentication is needed on the connection. + * The value of this word determines the authentication scheme in use. For + * version 3.0 of the protocol this may have one of the following values: + */ + +#define rfbConnFailed 0 +#define rfbNoAuth 1 +#define rfbVncAuth 2 + +#define rfbRA2 5 +#define rfbRA2ne 6 +#define rfbSSPI 7 +#define rfbSSPIne 8 +#define rfbTight 16 +#define rfbUltra 17 +#define rfbTLS 18 +#define rfbVeNCrypt 19 +#define rfbARD 30 +#define rfbMSLogon 0xfffffffa + +#define rfbVeNCryptPlain 256 +#define rfbVeNCryptTLSNone 257 +#define rfbVeNCryptTLSVNC 258 +#define rfbVeNCryptTLSPlain 259 +#define rfbVeNCryptX509None 260 +#define rfbVeNCryptX509VNC 261 +#define rfbVeNCryptX509Plain 262 +#define rfbVeNCryptX509SASL 263 +#define rfbVeNCryptTLSSASL 264 + +/* + * rfbConnFailed: For some reason the connection failed (e.g. the server + * cannot support the desired protocol version). This is + * followed by a string describing the reason (where a + * string is specified as a 32-bit length followed by that + * many ASCII characters). + * + * rfbNoAuth: No authentication is needed. + * + * rfbVncAuth: The VNC authentication scheme is to be used. A 16-byte + * challenge follows, which the client encrypts as + * appropriate using the password and sends the resulting + * 16-byte response. If the response is correct, the + * server sends the 32-bit word rfbVncAuthOK. If a simple + * failure happens, the server sends rfbVncAuthFailed and + * closes the connection. If the server decides that too + * many failures have occurred, it sends rfbVncAuthTooMany + * and closes the connection. In the latter case, the + * server should not allow an immediate reconnection by + * the client. + */ + +#define rfbVncAuthOK 0 +#define rfbVncAuthFailed 1 +#define rfbVncAuthTooMany 2 + + +/*----------------------------------------------------------------------------- + * Client Initialisation Message + * + * Once the client and server are sure that they're happy to talk to one + * another, the client sends an initialisation message. At present this + * message only consists of a boolean indicating whether the server should try + * to share the desktop by leaving other clients connected, or give exclusive + * access to this client by disconnecting all other clients. + */ + +typedef struct { + uint8_t shared; +} rfbClientInitMsg; + +#define sz_rfbClientInitMsg 1 + + +/*----------------------------------------------------------------------------- + * Server Initialisation Message + * + * After the client initialisation message, the server sends one of its own. + * This tells the client the width and height of the server's framebuffer, + * its pixel format and the name associated with the desktop. + */ + +typedef struct { + uint16_t framebufferWidth; + uint16_t framebufferHeight; + rfbPixelFormat format; /* the server's preferred pixel format */ + uint32_t nameLength; + /* followed by char name[nameLength] */ +} rfbServerInitMsg; + +#define sz_rfbServerInitMsg (8 + sz_rfbPixelFormat) + + +/* + * Following the server initialisation message it's up to the client to send + * whichever protocol messages it wants. Typically it will send a + * SetPixelFormat message and a SetEncodings message, followed by a + * FramebufferUpdateRequest. From then on the server will send + * FramebufferUpdate messages in response to the client's + * FramebufferUpdateRequest messages. The client should send + * FramebufferUpdateRequest messages with incremental set to true when it has + * finished processing one FramebufferUpdate and is ready to process another. + * With a fast client, the rate at which FramebufferUpdateRequests are sent + * should be regulated to avoid hogging the network. + */ + + + +/***************************************************************************** + * + * Message types + * + *****************************************************************************/ + +/* server -> client */ + +#define rfbFramebufferUpdate 0 +#define rfbSetColourMapEntries 1 +#define rfbBell 2 +#define rfbServerCutText 3 +/* Modif sf@2002 */ +#define rfbResizeFrameBuffer 4 +#define rfbPalmVNCReSizeFrameBuffer 0xF + +/* client -> server */ + +#define rfbSetPixelFormat 0 +#define rfbFixColourMapEntries 1 /* not currently supported */ +#define rfbSetEncodings 2 +#define rfbFramebufferUpdateRequest 3 +#define rfbKeyEvent 4 +#define rfbPointerEvent 5 +#define rfbClientCutText 6 +/* Modif sf@2002 - actually bidirectionnal */ +#define rfbFileTransfer 7 +/* Modif sf@2002 */ +#define rfbSetScale 8 +/* Modif rdv@2002 */ +#define rfbSetServerInput 9 +/* Modif rdv@2002 */ +#define rfbSetSW 10 +/* Modif sf@2002 - TextChat - Bidirectionnal */ +#define rfbTextChat 11 +/* Modif cs@2005 */ +/* PalmVNC 1.4 & 2.0 SetScale Factor message */ +#define rfbPalmVNCSetScaleFactor 0xF +/* Xvp message - bidirectional */ +#define rfbXvp 250 + + + + +/***************************************************************************** + * + * Encoding types + * + *****************************************************************************/ + +#define rfbEncodingRaw 0 +#define rfbEncodingCopyRect 1 +#define rfbEncodingRRE 2 +#define rfbEncodingCoRRE 4 +#define rfbEncodingHextile 5 +#define rfbEncodingZlib 6 +#define rfbEncodingTight 7 +#define rfbEncodingTightPng 0xFFFFFEFC /* -260 */ +#define rfbEncodingZlibHex 8 +#define rfbEncodingUltra 9 +#define rfbEncodingZRLE 16 +#define rfbEncodingZYWRLE 17 + +/* Cache & XOR-Zlib - rdv@2002 */ +#define rfbEncodingCache 0xFFFF0000 +#define rfbEncodingCacheEnable 0xFFFF0001 +#define rfbEncodingXOR_Zlib 0xFFFF0002 +#define rfbEncodingXORMonoColor_Zlib 0xFFFF0003 +#define rfbEncodingXORMultiColor_Zlib 0xFFFF0004 +#define rfbEncodingSolidColor 0xFFFF0005 +#define rfbEncodingXOREnable 0xFFFF0006 +#define rfbEncodingCacheZip 0xFFFF0007 +#define rfbEncodingSolMonoZip 0xFFFF0008 +#define rfbEncodingUltraZip 0xFFFF0009 + +/* Xvp pseudo-encoding */ +#define rfbEncodingXvp 0xFFFFFECB + +/* + * Special encoding numbers: + * 0xFFFFFD00 .. 0xFFFFFD05 -- subsampling level + * 0xFFFFFE00 .. 0xFFFFFE64 -- fine-grained quality level (0-100 scale) + * 0xFFFFFF00 .. 0xFFFFFF0F -- encoding-specific compression levels; + * 0xFFFFFF10 .. 0xFFFFFF1F -- mouse cursor shape data; + * 0xFFFFFF20 .. 0xFFFFFF2F -- various protocol extensions; + * 0xFFFFFF30 .. 0xFFFFFFDF -- not allocated yet; + * 0xFFFFFFE0 .. 0xFFFFFFEF -- quality level for JPEG compressor; + * 0xFFFFFFF0 .. 0xFFFFFFFF -- cross-encoding compression levels. + */ + +#define rfbEncodingFineQualityLevel0 0xFFFFFE00 +#define rfbEncodingFineQualityLevel100 0xFFFFFE64 +#define rfbEncodingSubsamp1X 0xFFFFFD00 +#define rfbEncodingSubsamp4X 0xFFFFFD01 +#define rfbEncodingSubsamp2X 0xFFFFFD02 +#define rfbEncodingSubsampGray 0xFFFFFD03 +#define rfbEncodingSubsamp8X 0xFFFFFD04 +#define rfbEncodingSubsamp16X 0xFFFFFD05 + +#define rfbEncodingCompressLevel0 0xFFFFFF00 +#define rfbEncodingCompressLevel1 0xFFFFFF01 +#define rfbEncodingCompressLevel2 0xFFFFFF02 +#define rfbEncodingCompressLevel3 0xFFFFFF03 +#define rfbEncodingCompressLevel4 0xFFFFFF04 +#define rfbEncodingCompressLevel5 0xFFFFFF05 +#define rfbEncodingCompressLevel6 0xFFFFFF06 +#define rfbEncodingCompressLevel7 0xFFFFFF07 +#define rfbEncodingCompressLevel8 0xFFFFFF08 +#define rfbEncodingCompressLevel9 0xFFFFFF09 + +#define rfbEncodingXCursor 0xFFFFFF10 +#define rfbEncodingRichCursor 0xFFFFFF11 +#define rfbEncodingPointerPos 0xFFFFFF18 + +#define rfbEncodingLastRect 0xFFFFFF20 +#define rfbEncodingNewFBSize 0xFFFFFF21 + +#define rfbEncodingQualityLevel0 0xFFFFFFE0 +#define rfbEncodingQualityLevel1 0xFFFFFFE1 +#define rfbEncodingQualityLevel2 0xFFFFFFE2 +#define rfbEncodingQualityLevel3 0xFFFFFFE3 +#define rfbEncodingQualityLevel4 0xFFFFFFE4 +#define rfbEncodingQualityLevel5 0xFFFFFFE5 +#define rfbEncodingQualityLevel6 0xFFFFFFE6 +#define rfbEncodingQualityLevel7 0xFFFFFFE7 +#define rfbEncodingQualityLevel8 0xFFFFFFE8 +#define rfbEncodingQualityLevel9 0xFFFFFFE9 + + +/* LibVNCServer additions. We claim 0xFFFE0000 - 0xFFFE00FF */ +#define rfbEncodingKeyboardLedState 0xFFFE0000 +#define rfbEncodingSupportedMessages 0xFFFE0001 +#define rfbEncodingSupportedEncodings 0xFFFE0002 +#define rfbEncodingServerIdentity 0xFFFE0003 + + +/***************************************************************************** + * + * Server -> client message definitions + * + *****************************************************************************/ + + +/*----------------------------------------------------------------------------- + * FramebufferUpdate - a block of rectangles to be copied to the framebuffer. + * + * This message consists of a header giving the number of rectangles of pixel + * data followed by the rectangles themselves. The header is padded so that + * together with the type byte it is an exact multiple of 4 bytes (to help + * with alignment of 32-bit pixels): + */ + +typedef struct { + uint8_t type; /* always rfbFramebufferUpdate */ + uint8_t pad; + uint16_t nRects; + /* followed by nRects rectangles */ +} rfbFramebufferUpdateMsg; + +#define sz_rfbFramebufferUpdateMsg 4 + +/* + * Each rectangle of pixel data consists of a header describing the position + * and size of the rectangle and a type word describing the encoding of the + * pixel data, followed finally by the pixel data. Note that if the client has + * not sent a SetEncodings message then it will only receive raw pixel data. + * Also note again that this structure is a multiple of 4 bytes. + */ + +typedef struct { + rfbRectangle r; + uint32_t encoding; /* one of the encoding types rfbEncoding... */ +} rfbFramebufferUpdateRectHeader; + +#define sz_rfbFramebufferUpdateRectHeader (sz_rfbRectangle + 4) + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * Supported Messages Encoding. This encoding does not contain any pixel data. + * Instead, it contains 2 sets of bitflags. These bitflags indicate what messages + * are supported by the server. + * rect->w contains byte count + */ + +typedef struct { + uint8_t client2server[32]; /* maximum of 256 message types (256/8)=32 */ + uint8_t server2client[32]; /* maximum of 256 message types (256/8)=32 */ +} rfbSupportedMessages; + +#define sz_rfbSupportedMessages 64 + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * Supported Encodings Encoding. This encoding does not contain any pixel data. + * Instead, it contains a list of (uint32_t) Encodings supported by this server. + * rect->w contains byte count + * rect->h contains encoding count + */ + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * Server Identity Encoding. This encoding does not contain any pixel data. + * Instead, it contains a text string containing information about the server. + * ie: "x11vnc: 0.8.1 lastmod: 2006-04-25 (libvncserver 0.9pre)\0" + * rect->w contains byte count + */ + + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * Raw Encoding. Pixels are sent in top-to-bottom scanline order, + * left-to-right within a scanline with no padding in between. + */ + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * KeyboardLedState Encoding. The X coordinate contains the Locked Modifiers + * so that a remote troubleshooter can identify that the users 'Caps Lock' + * is set... (It helps a *lot* when the users are untrained) + */ +#define rfbKeyboardMaskShift 1 +#define rfbKeyboardMaskCapsLock 2 +#define rfbKeyboardMaskControl 4 +#define rfbKeyboardMaskAlt 8 +#define rfbKeyboardMaskMeta 16 +#define rfbKeyboardMaskSuper 32 +#define rfbKeyboardMaskHyper 64 +#define rfbKeyboardMaskNumLock 128 +#define rfbKeyboardMaskScrollLock 256 +#define rfbKeyboardMaskAltGraph 512 + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * CopyRect Encoding. The pixels are specified simply by the x and y position + * of the source rectangle. + */ + +typedef struct { + uint16_t srcX; + uint16_t srcY; +} rfbCopyRect; + +#define sz_rfbCopyRect 4 + + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * RRE - Rise-and-Run-length Encoding. We have an rfbRREHeader structure + * giving the number of subrectangles following. Finally the data follows in + * the form [...] where each is + * []. + */ + +typedef struct { + uint32_t nSubrects; +} rfbRREHeader; + +#define sz_rfbRREHeader 4 + + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * CoRRE - Compact RRE Encoding. We have an rfbRREHeader structure giving + * the number of subrectangles following. Finally the data follows in the form + * [...] where each is + * []. This means that + * the whole rectangle must be at most 255x255 pixels. + */ + +typedef struct { + uint8_t x; + uint8_t y; + uint8_t w; + uint8_t h; +} rfbCoRRERectangle; + +#define sz_rfbCoRRERectangle 4 + + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * Hextile Encoding. The rectangle is divided up into "tiles" of 16x16 pixels, + * starting at the top left going in left-to-right, top-to-bottom order. If + * the width of the rectangle is not an exact multiple of 16 then the width of + * the last tile in each row will be correspondingly smaller. Similarly if the + * height is not an exact multiple of 16 then the height of each tile in the + * final row will also be smaller. Each tile begins with a "subencoding" type + * byte, which is a mask made up of a number of bits. If the Raw bit is set + * then the other bits are irrelevant; w*h pixel values follow (where w and h + * are the width and height of the tile). Otherwise the tile is encoded in a + * similar way to RRE, except that the position and size of each subrectangle + * can be specified in just two bytes. The other bits in the mask are as + * follows: + * + * BackgroundSpecified - if set, a pixel value follows which specifies + * the background colour for this tile. The first non-raw tile in a + * rectangle must have this bit set. If this bit isn't set then the + * background is the same as the last tile. + * + * ForegroundSpecified - if set, a pixel value follows which specifies + * the foreground colour to be used for all subrectangles in this tile. + * If this bit is set then the SubrectsColoured bit must be zero. + * + * AnySubrects - if set, a single byte follows giving the number of + * subrectangles following. If not set, there are no subrectangles (i.e. + * the whole tile is just solid background colour). + * + * SubrectsColoured - if set then each subrectangle is preceded by a pixel + * value giving the colour of that subrectangle. If not set, all + * subrectangles are the same colour, the foreground colour; if the + * ForegroundSpecified bit wasn't set then the foreground is the same as + * the last tile. + * + * The position and size of each subrectangle is specified in two bytes. The + * Pack macros below can be used to generate the two bytes from x, y, w, h, + * and the Extract macros can be used to extract the x, y, w, h values from + * the two bytes. + */ + +#define rfbHextileRaw (1 << 0) +#define rfbHextileBackgroundSpecified (1 << 1) +#define rfbHextileForegroundSpecified (1 << 2) +#define rfbHextileAnySubrects (1 << 3) +#define rfbHextileSubrectsColoured (1 << 4) + +#define rfbHextilePackXY(x,y) (((x) << 4) | (y)) +#define rfbHextilePackWH(w,h) ((((w)-1) << 4) | ((h)-1)) +#define rfbHextileExtractX(byte) ((byte) >> 4) +#define rfbHextileExtractY(byte) ((byte) & 0xf) +#define rfbHextileExtractW(byte) (((byte) >> 4) + 1) +#define rfbHextileExtractH(byte) (((byte) & 0xf) + 1) + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * zlib - zlib compressed Encoding. We have an rfbZlibHeader structure + * giving the number of bytes following. Finally the data follows is + * zlib compressed version of the raw pixel data as negotiated. + * (NOTE: also used by Ultra Encoding) + */ + +typedef struct { + uint32_t nBytes; +} rfbZlibHeader; + +#define sz_rfbZlibHeader 4 + +#ifdef LIBVNCSERVER_HAVE_LIBZ + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * Tight and TightPng Encoding. + * + *-- TightPng is like Tight but basic compression is not used, instead PNG + * data is sent. + * + *-- The first byte of each Tight-encoded rectangle is a "compression control + * byte". Its format is as follows (bit 0 is the least significant one): + * + * bit 0: if 1, then compression stream 0 should be reset; + * bit 1: if 1, then compression stream 1 should be reset; + * bit 2: if 1, then compression stream 2 should be reset; + * bit 3: if 1, then compression stream 3 should be reset; + * bits 7-4: if 1000 (0x08), then the compression type is "fill", + * if 1001 (0x09), then the compression type is "jpeg", + * (Tight only) if 1010 (0x0A), then the compression type is + * "basic" and no Zlib compression was used, + * (Tight only) if 1110 (0x0E), then the compression type is + * "basic", no Zlib compression was used, and a "filter id" byte + * follows this byte, + * (TightPng only) if 1010 (0x0A), then the compression type is + * "png", + * if 0xxx, then the compression type is "basic" and Zlib + * compression was used, + * values greater than 1010 are not valid. + * + * If the compression type is "basic" and Zlib compression was used, then bits + * 6..4 of the compression control byte (those xxx in 0xxx) specify the + * following: + * + * bits 5-4: decimal representation is the index of a particular zlib + * stream which should be used for decompressing the data; + * bit 6: if 1, then a "filter id" byte is following this byte. + * + *-- The data that follows after the compression control byte described + * above depends on the compression type ("fill", "jpeg", "png" or "basic"). + * + *-- If the compression type is "fill", then the only pixel value follows, in + * client pixel format (see NOTE 1). This value applies to all pixels of the + * rectangle. + * + *-- If the compression type is "jpeg" or "png", the following data stream + * looks like this: + * + * 1..3 bytes: data size (N) in compact representation; + * N bytes: JPEG or PNG image. + * + * Data size is compactly represented in one, two or three bytes, according + * to the following scheme: + * + * 0xxxxxxx (for values 0..127) + * 1xxxxxxx 0yyyyyyy (for values 128..16383) + * 1xxxxxxx 1yyyyyyy zzzzzzzz (for values 16384..4194303) + * + * Here each character denotes one bit, xxxxxxx are the least significant 7 + * bits of the value (bits 0-6), yyyyyyy are bits 7-13, and zzzzzzzz are the + * most significant 8 bits (bits 14-21). For example, decimal value 10000 + * should be represented as two bytes: binary 10010000 01001110, or + * hexadecimal 90 4E. + * + *-- If the compression type is "basic" and bit 6 of the compression control + * byte was set to 1, then the next (second) byte specifies "filter id" which + * tells the decoder what filter type was used by the encoder to pre-process + * pixel data before the compression. The "filter id" byte can be one of the + * following: + * + * 0: no filter ("copy" filter); + * 1: "palette" filter; + * 2: "gradient" filter. + * + *-- If bit 6 of the compression control byte is set to 0 (no "filter id" + * byte), or if the filter id is 0, then raw pixel values in the client + * format (see NOTE 1) will be compressed. See below details on the + * compression. + * + *-- The "gradient" filter pre-processes pixel data with a simple algorithm + * which converts each color component to a difference between a "predicted" + * intensity and the actual intensity. Such a technique does not affect + * uncompressed data size, but helps to compress photo-like images better. + * Pseudo-code for converting intensities to differences is the following: + * + * P[i,j] := V[i-1,j] + V[i,j-1] - V[i-1,j-1]; + * if (P[i,j] < 0) then P[i,j] := 0; + * if (P[i,j] > MAX) then P[i,j] := MAX; + * D[i,j] := V[i,j] - P[i,j]; + * + * Here V[i,j] is the intensity of a color component for a pixel at + * coordinates (i,j). MAX is the maximum value of intensity for a color + * component. + * + *-- The "palette" filter converts true-color pixel data to indexed colors + * and a palette which can consist of 2..256 colors. If the number of colors + * is 2, then each pixel is encoded in 1 bit, otherwise 8 bits is used to + * encode one pixel. 1-bit encoding is performed such way that the most + * significant bits correspond to the leftmost pixels, and each raw of pixels + * is aligned to the byte boundary. When "palette" filter is used, the + * palette is sent before the pixel data. The palette begins with an unsigned + * byte which value is the number of colors in the palette minus 1 (i.e. 1 + * means 2 colors, 255 means 256 colors in the palette). Then follows the + * palette itself which consist of pixel values in client pixel format (see + * NOTE 1). + * + *-- The pixel data is compressed using the zlib library. But if the data + * size after applying the filter but before the compression is less then 12, + * then the data is sent as is, uncompressed. Four separate zlib streams + * (0..3) can be used and the decoder should read the actual stream id from + * the compression control byte (see NOTE 2). + * + * If the compression is not used, then the pixel data is sent as is, + * otherwise the data stream looks like this: + * + * 1..3 bytes: data size (N) in compact representation; + * N bytes: zlib-compressed data. + * + * Data size is compactly represented in one, two or three bytes, just like + * in the "jpeg" compression method (see above). + * + *-- NOTE 1. If the color depth is 24, and all three color components are + * 8-bit wide, then one pixel in Tight encoding is always represented by + * three bytes, where the first byte is red component, the second byte is + * green component, and the third byte is blue component of the pixel color + * value. This applies to colors in palettes as well. + * + *-- NOTE 2. The decoder must reset compression streams' states before + * decoding the rectangle, if some of bits 0,1,2,3 in the compression control + * byte are set to 1. Note that the decoder must reset zlib streams even if + * the compression type is "fill", "jpeg" or "png". + * + *-- NOTE 3. The "gradient" filter and "jpeg" compression may be used only + * when bits-per-pixel value is either 16 or 32, not 8. + * + *-- NOTE 4. The width of any Tight-encoded rectangle cannot exceed 2048 + * pixels. If a rectangle is wider, it must be split into several rectangles + * and each one should be encoded separately. + * + */ + +#define rfbTightExplicitFilter 0x04 +#define rfbTightFill 0x08 +#define rfbTightJpeg 0x09 +#define rfbTightNoZlib 0x0A +#define rfbTightPng 0x0A +#define rfbTightMaxSubencoding 0x0A + +/* Filters to improve compression efficiency */ +#define rfbTightFilterCopy 0x00 +#define rfbTightFilterPalette 0x01 +#define rfbTightFilterGradient 0x02 + +#endif + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * XCursor encoding. This is a special encoding used to transmit X-style + * cursor shapes from server to clients. Note that for this encoding, + * coordinates in rfbFramebufferUpdateRectHeader structure hold hotspot + * position (r.x, r.y) and cursor size (r.w, r.h). If (w * h != 0), two RGB + * samples are sent after header in the rfbXCursorColors structure. They + * denote foreground and background colors of the cursor. If a client + * supports only black-and-white cursors, it should ignore these colors and + * assume that foreground is black and background is white. Next, two bitmaps + * (1 bits per pixel) follow: first one with actual data (value 0 denotes + * background color, value 1 denotes foreground color), second one with + * transparency data (bits with zero value mean that these pixels are + * transparent). Both bitmaps represent cursor data in a byte stream, from + * left to right, from top to bottom, and each row is byte-aligned. Most + * significant bits correspond to leftmost pixels. The number of bytes in + * each row can be calculated as ((w + 7) / 8). If (w * h == 0), cursor + * should be hidden (or default local cursor should be set by the client). + */ + +typedef struct { + uint8_t foreRed; + uint8_t foreGreen; + uint8_t foreBlue; + uint8_t backRed; + uint8_t backGreen; + uint8_t backBlue; +} rfbXCursorColors; + +#define sz_rfbXCursorColors 6 + + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * RichCursor encoding. This is a special encoding used to transmit cursor + * shapes from server to clients. It is similar to the XCursor encoding but + * uses client pixel format instead of two RGB colors to represent cursor + * image. For this encoding, coordinates in rfbFramebufferUpdateRectHeader + * structure hold hotspot position (r.x, r.y) and cursor size (r.w, r.h). + * After header, two pixmaps follow: first one with cursor image in current + * client pixel format (like in raw encoding), second with transparency data + * (1 bit per pixel, exactly the same format as used for transparency bitmap + * in the XCursor encoding). If (w * h == 0), cursor should be hidden (or + * default local cursor should be set by the client). + */ + + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * ZRLE - encoding combining Zlib compression, tiling, palettisation and + * run-length encoding. + */ + +typedef struct { + uint32_t length; +} rfbZRLEHeader; + +#define sz_rfbZRLEHeader 4 + +#define rfbZRLETileWidth 64 +#define rfbZRLETileHeight 64 + + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * ZLIBHEX - zlib compressed Hextile Encoding. Essentially, this is the + * hextile encoding with zlib compression on the tiles that can not be + * efficiently encoded with one of the other hextile subencodings. The + * new zlib subencoding uses two bytes to specify the length of the + * compressed tile and then the compressed data follows. As with the + * raw sub-encoding, the zlib subencoding invalidates the other + * values, if they are also set. + */ + +#define rfbHextileZlibRaw (1 << 5) +#define rfbHextileZlibHex (1 << 6) +#define rfbHextileZlibMono (1 << 7) + + +/*----------------------------------------------------------------------------- + * SetColourMapEntries - these messages are only sent if the pixel + * format uses a "colour map" (i.e. trueColour false) and the client has not + * fixed the entire colour map using FixColourMapEntries. In addition they + * will only start being sent after the client has sent its first + * FramebufferUpdateRequest. So if the client always tells the server to use + * trueColour then it never needs to process this type of message. + */ + +typedef struct { + uint8_t type; /* always rfbSetColourMapEntries */ + uint8_t pad; + uint16_t firstColour; + uint16_t nColours; + + /* Followed by nColours * 3 * uint16_t + r1, g1, b1, r2, g2, b2, r3, g3, b3, ..., rn, bn, gn */ + +} rfbSetColourMapEntriesMsg; + +#define sz_rfbSetColourMapEntriesMsg 6 + + + +/*----------------------------------------------------------------------------- + * Bell - ring a bell on the client if it has one. + */ + +typedef struct { + uint8_t type; /* always rfbBell */ +} rfbBellMsg; + +#define sz_rfbBellMsg 1 + + + +/*----------------------------------------------------------------------------- + * ServerCutText - the server has new text in its cut buffer. + */ + +typedef struct { + uint8_t type; /* always rfbServerCutText */ + uint8_t pad1; + uint16_t pad2; + uint32_t length; + /* followed by char text[length] */ +} rfbServerCutTextMsg; + +#define sz_rfbServerCutTextMsg 8 + + +/*----------------------------------------------------------------------------- + * // Modif sf@2002 + * FileTransferMsg - The client sends FileTransfer message. + * Bidirectional message - Files can be sent from client to server & vice versa + */ + +typedef struct _rfbFileTransferMsg { + uint8_t type; /* always rfbFileTransfer */ + uint8_t contentType; /* See defines below */ + uint8_t contentParam;/* Other possible content classification (Dir or File name, etc..) */ + uint8_t pad; /* It appears that UltraVNC *forgot* to Swap16IfLE(contentParam) */ + uint32_t size; /* FileSize or packet index or error or other */ +/* uint32_t sizeH; Additional 32Bits params to handle big values. Only for V2 (we want backward compatibility between all V1 versions) */ + uint32_t length; + /* followed by data char text[length] */ +} rfbFileTransferMsg; + +#define sz_rfbFileTransferMsg 12 + +#define rfbFileTransferVersion 2 /* v1 is the old FT version ( <= 1.0.0 RC18 versions) */ + +/* FileTransfer Content types and Params defines */ +#define rfbDirContentRequest 1 /* Client asks for the content of a given Server directory */ +#define rfbDirPacket 2 /* Full directory name or full file name. */ + /* Null content means end of Directory */ +#define rfbFileTransferRequest 3 /* Client asks the server for the transfer of a given file */ +#define rfbFileHeader 4 /* First packet of a file transfer, containing file's features */ +#define rfbFilePacket 5 /* One chunk of the file */ +#define rfbEndOfFile 6 /* End of file transfer (the file has been received or error) */ +#define rfbAbortFileTransfer 7 /* The file transfer must be aborted, whatever the state */ +#define rfbFileTransferOffer 8 /* The client offers to send a file to the server */ +#define rfbFileAcceptHeader 9 /* The server accepts or rejects the file */ +#define rfbCommand 10 /* The Client sends a simple command (File Delete, Dir create etc...) */ +#define rfbCommandReturn 11 /* The Client receives the server's answer about a simple command */ +#define rfbFileChecksums 12 /* The zipped checksums of the destination file (Delta Transfer) */ +#define rfbFileTransferAccess 14 /* Request FileTransfer authorization */ + + /* rfbDirContentRequest client Request - content params */ +#define rfbRDirContent 1 /* Request a Server Directory contents */ +#define rfbRDrivesList 2 /* Request the server's drives list */ +#define rfbRDirRecursiveList 3 /* Request a server directory content recursive sorted list */ +#define rfbRDirRecursiveSize 4 /* Request a server directory content recursive size */ + + /* rfbDirPacket & rfbCommandReturn server Answer - content params */ +#define rfbADirectory 1 /* Reception of a directory name */ +#define rfbAFile 2 /* Reception of a file name */ +#define rfbADrivesList 3 /* Reception of a list of drives */ +#define rfbADirCreate 4 /* Response to a create dir command */ +#define rfbADirDelete 5 /* Response to a delete dir command */ +#define rfbAFileCreate 6 /* Response to a create file command */ +#define rfbAFileDelete 7 /* Response to a delete file command */ +#define rfbAFileRename 8 /* Response to a rename file command */ +#define rfbADirRename 9 /* Response to a rename dir command */ +#define rfbADirRecursiveListItem 10 +#define rfbADirRecursiveSize 11 + + /* rfbCommand Command - content params */ +#define rfbCDirCreate 1 /* Request the server to create the given directory */ +#define rfbCDirDelete 2 /* Request the server to delete the given directory */ +#define rfbCFileCreate 3 /* Request the server to create the given file */ +#define rfbCFileDelete 4 /* Request the server to delete the given file */ +#define rfbCFileRename 5 /* Request the server to rename the given file */ +#define rfbCDirRename 6 /* Request the server to rename the given directory */ + + /* Errors - content params or "size" field */ +#define rfbRErrorUnknownCmd 1 /* Unknown FileTransfer command. */ +#define rfbRErrorCmd 0xFFFFFFFF/* Error when a command fails on remote side (ret in "size" field) */ + +#define sz_rfbBlockSize 8192 /* Size of a File Transfer packet (before compression) */ +#define rfbZipDirectoryPrefix "!UVNCDIR-\0" /* Transfered directory are zipped in a file with this prefix. Must end with "-" */ +#define sz_rfbZipDirectoryPrefix 9 +#define rfbDirPrefix "[ " +#define rfbDirSuffix " ]" + + + +/*----------------------------------------------------------------------------- + * Modif sf@2002 + * TextChatMsg - Utilized to order the TextChat mode on server or client + * Bidirectional message + */ + +typedef struct _rfbTextChatMsg { + uint8_t type; /* always rfbTextChat */ + uint8_t pad1; /* Could be used later as an additionnal param */ + uint16_t pad2; /* Could be used later as text offset, for instance */ + uint32_t length; /* Specific values for Open, close, finished (-1, -2, -3) */ + /* followed by char text[length] */ +} rfbTextChatMsg; + +#define sz_rfbTextChatMsg 8 + +#define rfbTextMaxSize 4096 +#define rfbTextChatOpen 0xFFFFFFFF +#define rfbTextChatClose 0xFFFFFFFE +#define rfbTextChatFinished 0xFFFFFFFD + + +/*----------------------------------------------------------------------------- + * Xvp Message + * Bidirectional message + * A server which supports the xvp extension declares this by sending a message + * with an Xvp_INIT xvp-message-code when it receives a request from the client + * to use the xvp Pseudo-encoding. The server must specify in this message the + * highest xvp-extension-version it supports: the client may assume that the + * server supports all versions from 1 up to this value. The client is then + * free to use any supported version. Currently, only version 1 is defined. + * + * A server which subsequently receives an xvp Client Message requesting an + * operation which it is unable to perform, informs the client of this by + * sending a message with an Xvp_FAIL xvp-message-code, and the same + * xvp-extension-version as included in the client's operation request. + * + * A client supporting the xvp extension sends this to request that the server + * initiate a clean shutdown, clean reboot or abrupt reset of the system whose + * framebuffer the client is displaying. + */ + + +typedef struct { + uint8_t type; /* always rfbXvp */ + uint8_t pad; + uint8_t version; /* xvp extension version */ + uint8_t code; /* xvp message code */ +} rfbXvpMsg; + +#define sz_rfbXvpMsg (4) + +/* server message codes */ +#define rfbXvp_Fail 0 +#define rfbXvp_Init 1 +/* client message codes */ +#define rfbXvp_Shutdown 2 +#define rfbXvp_Reboot 3 +#define rfbXvp_Reset 4 + + +/*----------------------------------------------------------------------------- + * Modif sf@2002 + * ResizeFrameBuffer - The Client must change the size of its framebuffer + */ + +typedef struct _rfbResizeFrameBufferMsg { + uint8_t type; /* always rfbResizeFrameBuffer */ + uint8_t pad1; + uint16_t framebufferWidth; /* FrameBuffer width */ + uint16_t framebufferHeigth; /* FrameBuffer height */ +} rfbResizeFrameBufferMsg; + +#define sz_rfbResizeFrameBufferMsg 6 + + +/*----------------------------------------------------------------------------- + * Copyright (C) 2001 Harakan Software + * PalmVNC 1.4 & 2.? ResizeFrameBuffer message + * ReSizeFrameBuffer - tell the RFB client to alter its framebuffer, either + * due to a resize of the server desktop or a client-requested scaling factor. + * The pixel format remains unchanged. + */ + +typedef struct { + uint8_t type; /* always rfbReSizeFrameBuffer */ + uint8_t pad1; + uint16_t desktop_w; /* Desktop width */ + uint16_t desktop_h; /* Desktop height */ + uint16_t buffer_w; /* FrameBuffer width */ + uint16_t buffer_h; /* Framebuffer height */ + uint16_t pad2; + +} rfbPalmVNCReSizeFrameBufferMsg; + +#define sz_rfbPalmVNCReSizeFrameBufferMsg (12) + + + + +/*----------------------------------------------------------------------------- + * Union of all server->client messages. + */ + +typedef union { + uint8_t type; + rfbFramebufferUpdateMsg fu; + rfbSetColourMapEntriesMsg scme; + rfbBellMsg b; + rfbServerCutTextMsg sct; + rfbResizeFrameBufferMsg rsfb; + rfbPalmVNCReSizeFrameBufferMsg prsfb; + rfbFileTransferMsg ft; + rfbTextChatMsg tc; + rfbXvpMsg xvp; +} rfbServerToClientMsg; + + + +/*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + * RDV Cache Encoding. + * special is not used at this point, can be used to reset cache or other specials + * just put it to make sure we don't have to change the encoding again. + */ + +typedef struct { + uint16_t special; +} rfbCacheRect; + +#define sz_rfbCacheRect 2 + + + + +/***************************************************************************** + * + * Message definitions (client -> server) + * + *****************************************************************************/ + + +/*----------------------------------------------------------------------------- + * SetPixelFormat - tell the RFB server the format in which the client wants + * pixels sent. + */ + +typedef struct { + uint8_t type; /* always rfbSetPixelFormat */ + uint8_t pad1; + uint16_t pad2; + rfbPixelFormat format; +} rfbSetPixelFormatMsg; + +#define sz_rfbSetPixelFormatMsg (sz_rfbPixelFormat + 4) + + +/*----------------------------------------------------------------------------- + * FixColourMapEntries - when the pixel format uses a "colour map", fix + * read-only colour map entries. + * + * ***************** NOT CURRENTLY SUPPORTED ***************** + */ + +typedef struct { + uint8_t type; /* always rfbFixColourMapEntries */ + uint8_t pad; + uint16_t firstColour; + uint16_t nColours; + + /* Followed by nColours * 3 * uint16_t + r1, g1, b1, r2, g2, b2, r3, g3, b3, ..., rn, bn, gn */ + +} rfbFixColourMapEntriesMsg; + +#define sz_rfbFixColourMapEntriesMsg 6 + + +/*----------------------------------------------------------------------------- + * SetEncodings - tell the RFB server which encoding types we accept. Put them + * in order of preference, if we have any. We may always receive raw + * encoding, even if we don't specify it here. + */ + +typedef struct { + uint8_t type; /* always rfbSetEncodings */ + uint8_t pad; + uint16_t nEncodings; + /* followed by nEncodings * uint32_t encoding types */ +} rfbSetEncodingsMsg; + +#define sz_rfbSetEncodingsMsg 4 + + +/*----------------------------------------------------------------------------- + * FramebufferUpdateRequest - request for a framebuffer update. If incremental + * is true then the client just wants the changes since the last update. If + * false then it wants the whole of the specified rectangle. + */ + +typedef struct { + uint8_t type; /* always rfbFramebufferUpdateRequest */ + uint8_t incremental; + uint16_t x; + uint16_t y; + uint16_t w; + uint16_t h; +} rfbFramebufferUpdateRequestMsg; + +#define sz_rfbFramebufferUpdateRequestMsg 10 + + +/*----------------------------------------------------------------------------- + * KeyEvent - key press or release + * + * Keys are specified using the "keysym" values defined by the X Window System. + * For most ordinary keys, the keysym is the same as the corresponding ASCII + * value. Other common keys are: + * + * BackSpace 0xff08 + * Tab 0xff09 + * Return or Enter 0xff0d + * Escape 0xff1b + * Insert 0xff63 + * Delete 0xffff + * Home 0xff50 + * End 0xff57 + * Page Up 0xff55 + * Page Down 0xff56 + * Left 0xff51 + * Up 0xff52 + * Right 0xff53 + * Down 0xff54 + * F1 0xffbe + * F2 0xffbf + * ... ... + * F12 0xffc9 + * Shift 0xffe1 + * Control 0xffe3 + * Meta 0xffe7 + * Alt 0xffe9 + */ + +typedef struct { + uint8_t type; /* always rfbKeyEvent */ + uint8_t down; /* true if down (press), false if up */ + uint16_t pad; + uint32_t key; /* key is specified as an X keysym */ +} rfbKeyEventMsg; + +#define sz_rfbKeyEventMsg 8 + + +/*----------------------------------------------------------------------------- + * PointerEvent - mouse/pen move and/or button press. + */ + +typedef struct { + uint8_t type; /* always rfbPointerEvent */ + uint8_t buttonMask; /* bits 0-7 are buttons 1-8, 0=up, 1=down */ + uint16_t x; + uint16_t y; +} rfbPointerEventMsg; + +#define rfbButton1Mask 1 +#define rfbButton2Mask 2 +#define rfbButton3Mask 4 +#define rfbButton4Mask 8 +#define rfbButton5Mask 16 +/* RealVNC 335 method */ +#define rfbWheelUpMask rfbButton4Mask +#define rfbWheelDownMask rfbButton5Mask + +#define sz_rfbPointerEventMsg 6 + + + +/*----------------------------------------------------------------------------- + * ClientCutText - the client has new text in its cut buffer. + */ + +typedef struct { + uint8_t type; /* always rfbClientCutText */ + uint8_t pad1; + uint16_t pad2; + uint32_t length; + /* followed by char text[length] */ +} rfbClientCutTextMsg; + +#define sz_rfbClientCutTextMsg 8 + + + +/*----------------------------------------------------------------------------- + * sf@2002 - Set Server Scale + * SetServerScale - Server must change the scale of the client buffer. + */ + +typedef struct _rfbSetScaleMsg { + uint8_t type; /* always rfbSetScale */ + uint8_t scale; /* Scale value 1server messages. + */ + +typedef union { + uint8_t type; + rfbSetPixelFormatMsg spf; + rfbFixColourMapEntriesMsg fcme; + rfbSetEncodingsMsg se; + rfbFramebufferUpdateRequestMsg fur; + rfbKeyEventMsg ke; + rfbPointerEventMsg pe; + rfbClientCutTextMsg cct; + rfbSetScaleMsg ssc; + rfbPalmVNCSetScaleFactorMsg pssf; + rfbSetServerInputMsg sim; + rfbFileTransferMsg ft; + rfbSetSWMsg sw; + rfbTextChatMsg tc; + rfbXvpMsg xvp; +} rfbClientToServerMsg; + +/* + * vncauth.h - describes the functions provided by the vncauth library. + */ + +#define MAXPWLEN 8 +#define CHALLENGESIZE 16 + +extern int rfbEncryptAndStorePasswd(char *passwd, char *fname); +extern char *rfbDecryptPasswdFromFile(char *fname); +extern void rfbRandomBytes(unsigned char *bytes); +extern void rfbEncryptBytes(unsigned char *bytes, char *passwd); + + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/rfb/rfbregion.h b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbregion.h new file mode 100644 index 0000000..53da667 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/rfb/rfbregion.h @@ -0,0 +1,65 @@ +#ifndef SRAREGION_H +#define SRAREGION_H + +/* -=- SRA - Simple Region Algorithm + * A simple rectangular region implementation. + * Copyright (c) 2001 James "Wez" Weatherall, Johannes E. Schindelin + */ + +/* -=- sraRect */ + +typedef struct _rect { + int x1; + int y1; + int x2; + int y2; +} sraRect; + +typedef struct sraRegion sraRegion; + +/* -=- Region manipulation functions */ + +extern sraRegion *sraRgnCreate(); +extern sraRegion *sraRgnCreateRect(int x1, int y1, int x2, int y2); +extern sraRegion *sraRgnCreateRgn(const sraRegion *src); + +extern void sraRgnDestroy(sraRegion *rgn); +extern void sraRgnMakeEmpty(sraRegion *rgn); +extern rfbBool sraRgnAnd(sraRegion *dst, const sraRegion *src); +extern void sraRgnOr(sraRegion *dst, const sraRegion *src); +extern rfbBool sraRgnSubtract(sraRegion *dst, const sraRegion *src); + +extern void sraRgnOffset(sraRegion *dst, int dx, int dy); + +extern rfbBool sraRgnPopRect(sraRegion *region, sraRect *rect, + unsigned long flags); + +extern unsigned long sraRgnCountRects(const sraRegion *rgn); +extern rfbBool sraRgnEmpty(const sraRegion *rgn); + +extern sraRegion *sraRgnBBox(const sraRegion *src); + +/* -=- rectangle iterator */ + +typedef struct sraRectangleIterator { + rfbBool reverseX,reverseY; + int ptrSize,ptrPos; + struct sraSpan** sPtrs; +} sraRectangleIterator; + +extern sraRectangleIterator *sraRgnGetIterator(sraRegion *s); +extern sraRectangleIterator *sraRgnGetReverseIterator(sraRegion *s,rfbBool reverseX,rfbBool reverseY); +extern rfbBool sraRgnIteratorNext(sraRectangleIterator *i,sraRect *r); +extern void sraRgnReleaseIterator(sraRectangleIterator *i); + +void sraRgnPrint(const sraRegion *s); + +/* -=- Rectangle clipper (for speed) */ + +extern rfbBool sraClipRect(int *x, int *y, int *w, int *h, + int cx, int cy, int cw, int ch); + +extern rfbBool sraClipRect2(int *x, int *y, int *x2, int *y2, + int cx, int cy, int cx2, int cy2); + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/rfbconfig.h.in b/jni/vnc/LibVNCServer-0.9.9/rfbconfig.h.in new file mode 100644 index 0000000..8ae039e --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/rfbconfig.h.in @@ -0,0 +1,429 @@ +/* rfbconfig.h.in. Generated from configure.ac by autoheader. */ + +/* Define if building universal (internal helper macro) */ +#undef AC_APPLE_UNIVERSAL_BUILD + +/* Enable 24 bit per pixel in native framebuffer */ +#undef ALLOW24BPP + +/* work around when write() returns ENOENT but does not mean it */ +#undef ENOENT_WORKAROUND + +/* Use ffmpeg (for vnc2mpg) */ +#undef FFMPEG + +/* Android host system detected */ +#undef HAVE_ANDROID + +/* Define to 1 if you have the header file. */ +#undef HAVE_ARPA_INET_H + +/* Avahi/mDNS client build environment present */ +#undef HAVE_AVAHI + +/* Define to 1 if you have the `crypt' function. */ +#undef HAVE_CRYPT + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */ +#undef HAVE_DOPRNT + +/* DPMS extension build environment present */ +#undef HAVE_DPMS + +/* FBPM extension build environment present */ +#undef HAVE_FBPM + +/* Define to 1 if you have the header file. */ +#undef HAVE_FCNTL_H + +/* Define to 1 if you have the `fork' function. */ +#undef HAVE_FORK + +/* Define to 1 if you have the `ftime' function. */ +#undef HAVE_FTIME + +/* Define to 1 if you have the `geteuid' function. */ +#undef HAVE_GETEUID + +/* Define to 1 if you have the `gethostbyname' function. */ +#undef HAVE_GETHOSTBYNAME + +/* Define to 1 if you have the `gethostname' function. */ +#undef HAVE_GETHOSTNAME + +/* Define to 1 if you have the `getpwnam' function. */ +#undef HAVE_GETPWNAM + +/* Define to 1 if you have the `getpwuid' function. */ +#undef HAVE_GETPWUID + +/* Define to 1 if you have the `getspnam' function. */ +#undef HAVE_GETSPNAM + +/* Define to 1 if you have the `gettimeofday' function. */ +#undef HAVE_GETTIMEOFDAY + +/* Define to 1 if you have the `getuid' function. */ +#undef HAVE_GETUID + +/* GnuTLS library present */ +#undef HAVE_GNUTLS + +/* Define to 1 if you have the `grantpt' function. */ +#undef HAVE_GRANTPT + +/* Define to 1 if you have the `inet_ntoa' function. */ +#undef HAVE_INET_NTOA + +/* Define to 1 if you have the `initgroups' function. */ +#undef HAVE_INITGROUPS + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* IRIX XReadDisplay available */ +#undef HAVE_IRIX_XREADDISPLAY + +/* libcrypt library present */ +#undef HAVE_LIBCRYPT + +/* openssl libcrypto library present */ +#undef HAVE_LIBCRYPTO + +/* Define to 1 if you have the `cygipc' library (-lcygipc). */ +#undef HAVE_LIBCYGIPC + +/* libjpeg support enabled */ +#undef HAVE_LIBJPEG + +/* Define to 1 if you have the `nsl' library (-lnsl). */ +#undef HAVE_LIBNSL + +/* Define to 1 if you have the `png' library (-lpng). */ +#undef HAVE_LIBPNG + +/* Define to 1 if you have the `pthread' library (-lpthread). */ +#undef HAVE_LIBPTHREAD + +/* Define to 1 if you have the `socket' library (-lsocket). */ +#undef HAVE_LIBSOCKET + +/* openssl libssl library present */ +#undef HAVE_LIBSSL + +/* XDAMAGE extension build environment present */ +#undef HAVE_LIBXDAMAGE + +/* XFIXES extension build environment present */ +#undef HAVE_LIBXFIXES + +/* XINERAMA extension build environment present */ +#undef HAVE_LIBXINERAMA + +/* XRANDR extension build environment present */ +#undef HAVE_LIBXRANDR + +/* DEC-XTRAP extension build environment present */ +#undef HAVE_LIBXTRAP + +/* Define to 1 if you have the `z' library (-lz). */ +#undef HAVE_LIBZ + +/* linux fb device build environment present */ +#undef HAVE_LINUX_FB_H + +/* linux/input.h present */ +#undef HAVE_LINUX_INPUT_H + +/* linux uinput device build environment present */ +#undef HAVE_LINUX_UINPUT_H + +/* video4linux build environment present */ +#undef HAVE_LINUX_VIDEODEV_H + +/* build MacOS X native display support */ +#undef HAVE_MACOSX_NATIVE_DISPLAY + +/* MacOS X OpenGL present */ +#undef HAVE_MACOSX_OPENGL_H + +/* Define to 1 if you have the `memmove' function. */ +#undef HAVE_MEMMOVE + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the `memset' function. */ +#undef HAVE_MEMSET + +/* Define to 1 if you have the `mkfifo' function. */ +#undef HAVE_MKFIFO + +/* Define to 1 if you have the `mmap' function. */ +#undef HAVE_MMAP + +/* Define to 1 if you have the header file. */ +#undef HAVE_NETDB_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_NETINET_IN_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_PWD_H + +/* RECORD extension build environment present */ +#undef HAVE_RECORD + +/* Define to 1 if you have the `select' function. */ +#undef HAVE_SELECT + +/* Define to 1 if you have the `setegid' function. */ +#undef HAVE_SETEGID + +/* Define to 1 if you have the `seteuid' function. */ +#undef HAVE_SETEUID + +/* Define to 1 if you have the `setgid' function. */ +#undef HAVE_SETGID + +/* Define to 1 if you have the `setpgrp' function. */ +#undef HAVE_SETPGRP + +/* Define to 1 if you have the `setsid' function. */ +#undef HAVE_SETSID + +/* Define to 1 if you have the `setuid' function. */ +#undef HAVE_SETUID + +/* Define to 1 if you have the `setutxent' function. */ +#undef HAVE_SETUTXENT + +/* Define to 1 if you have the `shmat' function. */ +#undef HAVE_SHMAT + +/* Define to 1 if you have the `socket' function. */ +#undef HAVE_SOCKET + +/* Solaris XReadScreen available */ +#undef HAVE_SOLARIS_XREADSCREEN + +/* Define to 1 if `stat' has the bug that it succeeds when given the + zero-length file name argument. */ +#undef HAVE_STAT_EMPTY_STRING_BUG + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the `strchr' function. */ +#undef HAVE_STRCHR + +/* Define to 1 if you have the `strcspn' function. */ +#undef HAVE_STRCSPN + +/* Define to 1 if you have the `strdup' function. */ +#undef HAVE_STRDUP + +/* Define to 1 if you have the `strerror' function. */ +#undef HAVE_STRERROR + +/* Define to 1 if you have the `strftime' function. */ +#undef HAVE_STRFTIME + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the `strstr' function. */ +#undef HAVE_STRSTR + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYSLOG_H + +/* Use the system libvncserver build environment for x11vnc. */ +#undef HAVE_SYSTEM_LIBVNCSERVER + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_IOCTL_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_SOCKET_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STROPTS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TIMEB_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TIME_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have that is POSIX.1 compatible. */ +#undef HAVE_SYS_WAIT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_TERMIOS_H + +/* Define to 1 if compiler supports __thread */ +#undef HAVE_TLS + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_UTMPX_H + +/* Define to 1 if you have the `vfork' function. */ +#undef HAVE_VFORK + +/* Define to 1 if you have the header file. */ +#undef HAVE_VFORK_H + +/* Define to 1 if you have the `vprintf' function. */ +#undef HAVE_VPRINTF + +/* Define to 1 if you have the `waitpid' function. */ +#undef HAVE_WAITPID + +/* Define to 1 if `fork' works. */ +#undef HAVE_WORKING_FORK + +/* Define to 1 if `vfork' works. */ +#undef HAVE_WORKING_VFORK + +/* Define to 1 if you have the header file. */ +#undef HAVE_WS2TCPIP_H + +/* X11 build environment present */ +#undef HAVE_X11 + +/* open ssl X509_print_ex_fp available */ +#undef HAVE_X509_PRINT_EX_FP + +/* XKEYBOARD extension build environment present */ +#undef HAVE_XKEYBOARD + +/* MIT-SHM extension build environment present */ +#undef HAVE_XSHM + +/* XTEST extension build environment present */ +#undef HAVE_XTEST + +/* XTEST extension has XTestGrabControl */ +#undef HAVE_XTESTGRABCONTROL + +/* Enable IPv6 support */ +#undef IPv6 + +/* Define to 1 if `lstat' dereferences a symlink specified with a trailing + slash. */ +#undef LSTAT_FOLLOWS_SLASHED_SYMLINK + +/* Need a typedef for in_addr_t */ +#undef NEED_INADDR_T + +/* Define to 1 if your C compiler doesn't accept -c and -o together. */ +#undef NO_MINUS_C_MINUS_O + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* The number of bytes in type char */ +#undef SIZEOF_CHAR + +/* The number of bytes in type int */ +#undef SIZEOF_INT + +/* The number of bytes in type long */ +#undef SIZEOF_LONG + +/* The number of bytes in type short */ +#undef SIZEOF_SHORT + +/* The number of bytes in type void* */ +#undef SIZEOF_VOIDP + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define to 1 if you can safely include both and . */ +#undef TIME_WITH_SYS_TIME + +/* Version number of package */ +#undef VERSION + +/* Enable support for libgcrypt in libvncclient */ +#undef WITH_CLIENT_GCRYPT + +/* Disable TightVNCFileTransfer protocol */ +#undef WITH_TIGHTVNC_FILETRANSFER + +/* Disable WebSockets support */ +#undef WITH_WEBSOCKETS + +/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most + significant byte first (like Motorola and SPARC, unlike Intel). */ +#if defined AC_APPLE_UNIVERSAL_BUILD +# if defined __BIG_ENDIAN__ +# define WORDS_BIGENDIAN 1 +# endif +#else +# ifndef WORDS_BIGENDIAN +# undef WORDS_BIGENDIAN +# endif +#endif + +/* Define to 1 if the X Window System is missing or not being used. */ +#undef X_DISPLAY_MISSING + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to `__inline__' or `__inline' if that's what the C compiler + calls it, or to nothing if 'inline' is not supported under any name. */ +#ifndef __cplusplus +#undef inline +#endif + +/* Define to `int' if does not define. */ +#undef pid_t + +/* Define to `unsigned int' if does not define. */ +#undef size_t + +/* The type for socklen */ +#undef socklen_t + +/* Define as `fork' if `vfork' does not work. */ +#undef vfork diff --git a/jni/vnc/LibVNCServer-0.9.9/test/Makefile.am b/jni/vnc/LibVNCServer-0.9.9/test/Makefile.am new file mode 100644 index 0000000..808ebf3 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/test/Makefile.am @@ -0,0 +1,27 @@ + +if HAVE_LIBJPEG +# TurboJPEG wrapper tests +noinst_PROGRAMS=tjunittest tjbench +tjunittest_SOURCES=tjunittest.c ../common/turbojpeg.c ../common/turbojpeg.h \ + tjutil.c tjutil.h +tjbench_SOURCES=tjbench.c ../common/turbojpeg.c ../common/turbojpeg.h \ + tjutil.c tjutil.h bmp.c bmp.h +tjbench_LDADD=$(LDADD) -lm +endif + +INCLUDES = -I$(top_srcdir) -I$(top_srcdir)/common +LDADD = ../libvncserver/libvncserver.la ../libvncclient/libvncclient.la @WSOCKLIB@ + +if HAVE_LIBPTHREAD +BACKGROUND_TEST=blooptest +ENCODINGS_TEST=encodingstest +endif + +copyrecttest_LDADD=$(LDADD) -lm + +check_PROGRAMS=$(ENCODINGS_TEST) cargstest copyrecttest $(BACKGROUND_TEST) \ + cursortest + +test: encodingstest$(EXEEXT) cargstest$(EXEEXT) copyrecttest$(EXEEXT) + ./encodingstest && ./cargstest + diff --git a/jni/vnc/LibVNCServer-0.9.9/test/Makefile.in b/jni/vnc/LibVNCServer-0.9.9/test/Makefile.in new file mode 100644 index 0000000..6b38568 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/test/Makefile.in @@ -0,0 +1,624 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@HAVE_LIBJPEG_TRUE@noinst_PROGRAMS = tjunittest$(EXEEXT) \ +@HAVE_LIBJPEG_TRUE@ tjbench$(EXEEXT) +check_PROGRAMS = $(am__EXEEXT_1) cargstest$(EXEEXT) \ + copyrecttest$(EXEEXT) $(am__EXEEXT_2) cursortest$(EXEEXT) +subdir = test +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/rfbconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +@HAVE_LIBPTHREAD_TRUE@am__EXEEXT_1 = encodingstest$(EXEEXT) +@HAVE_LIBPTHREAD_TRUE@am__EXEEXT_2 = blooptest$(EXEEXT) +PROGRAMS = $(noinst_PROGRAMS) +blooptest_SOURCES = blooptest.c +blooptest_OBJECTS = blooptest.$(OBJEXT) +blooptest_LDADD = $(LDADD) +blooptest_DEPENDENCIES = ../libvncserver/libvncserver.la \ + ../libvncclient/libvncclient.la +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +cargstest_SOURCES = cargstest.c +cargstest_OBJECTS = cargstest.$(OBJEXT) +cargstest_LDADD = $(LDADD) +cargstest_DEPENDENCIES = ../libvncserver/libvncserver.la \ + ../libvncclient/libvncclient.la +copyrecttest_SOURCES = copyrecttest.c +copyrecttest_OBJECTS = copyrecttest.$(OBJEXT) +am__DEPENDENCIES_1 = ../libvncserver/libvncserver.la \ + ../libvncclient/libvncclient.la +copyrecttest_DEPENDENCIES = $(am__DEPENDENCIES_1) +cursortest_SOURCES = cursortest.c +cursortest_OBJECTS = cursortest.$(OBJEXT) +cursortest_LDADD = $(LDADD) +cursortest_DEPENDENCIES = ../libvncserver/libvncserver.la \ + ../libvncclient/libvncclient.la +encodingstest_SOURCES = encodingstest.c +encodingstest_OBJECTS = encodingstest.$(OBJEXT) +encodingstest_LDADD = $(LDADD) +encodingstest_DEPENDENCIES = ../libvncserver/libvncserver.la \ + ../libvncclient/libvncclient.la +am__tjbench_SOURCES_DIST = tjbench.c ../common/turbojpeg.c \ + ../common/turbojpeg.h tjutil.c tjutil.h bmp.c bmp.h +@HAVE_LIBJPEG_TRUE@am_tjbench_OBJECTS = tjbench.$(OBJEXT) \ +@HAVE_LIBJPEG_TRUE@ turbojpeg.$(OBJEXT) tjutil.$(OBJEXT) \ +@HAVE_LIBJPEG_TRUE@ bmp.$(OBJEXT) +tjbench_OBJECTS = $(am_tjbench_OBJECTS) +@HAVE_LIBJPEG_TRUE@tjbench_DEPENDENCIES = $(am__DEPENDENCIES_1) +am__tjunittest_SOURCES_DIST = tjunittest.c ../common/turbojpeg.c \ + ../common/turbojpeg.h tjutil.c tjutil.h +@HAVE_LIBJPEG_TRUE@am_tjunittest_OBJECTS = tjunittest.$(OBJEXT) \ +@HAVE_LIBJPEG_TRUE@ turbojpeg.$(OBJEXT) tjutil.$(OBJEXT) +tjunittest_OBJECTS = $(am_tjunittest_OBJECTS) +tjunittest_LDADD = $(LDADD) +tjunittest_DEPENDENCIES = ../libvncserver/libvncserver.la \ + ../libvncclient/libvncclient.la +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = blooptest.c cargstest.c copyrecttest.c cursortest.c \ + encodingstest.c $(tjbench_SOURCES) $(tjunittest_SOURCES) +DIST_SOURCES = blooptest.c cargstest.c copyrecttest.c cursortest.c \ + encodingstest.c $(am__tjbench_SOURCES_DIST) \ + $(am__tjunittest_SOURCES_DIST) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AVAHI_CFLAGS = @AVAHI_CFLAGS@ +AVAHI_LIBS = @AVAHI_LIBS@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CRYPT_LIBS = @CRYPT_LIBS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LDFLAGS = @JPEG_LDFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +RPMSOURCEDIR = @RPMSOURCEDIR@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSL_LIBS = @SSL_LIBS@ +STRIP = @STRIP@ +SYSTEM_LIBVNCSERVER_CFLAGS = @SYSTEM_LIBVNCSERVER_CFLAGS@ +SYSTEM_LIBVNCSERVER_LIBS = @SYSTEM_LIBVNCSERVER_LIBS@ +VERSION = @VERSION@ +WSOCKLIB = @WSOCKLIB@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_ffmpeg = @with_ffmpeg@ +@HAVE_LIBJPEG_TRUE@tjunittest_SOURCES = tjunittest.c ../common/turbojpeg.c ../common/turbojpeg.h \ +@HAVE_LIBJPEG_TRUE@ tjutil.c tjutil.h + +@HAVE_LIBJPEG_TRUE@tjbench_SOURCES = tjbench.c ../common/turbojpeg.c ../common/turbojpeg.h \ +@HAVE_LIBJPEG_TRUE@ tjutil.c tjutil.h bmp.c bmp.h + +@HAVE_LIBJPEG_TRUE@tjbench_LDADD = $(LDADD) -lm +INCLUDES = -I$(top_srcdir) -I$(top_srcdir)/common +LDADD = ../libvncserver/libvncserver.la ../libvncclient/libvncclient.la @WSOCKLIB@ +@HAVE_LIBPTHREAD_TRUE@BACKGROUND_TEST = blooptest +@HAVE_LIBPTHREAD_TRUE@ENCODINGS_TEST = encodingstest +copyrecttest_LDADD = $(LDADD) -lm +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu test/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu test/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +clean-checkPROGRAMS: + @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +blooptest$(EXEEXT): $(blooptest_OBJECTS) $(blooptest_DEPENDENCIES) + @rm -f blooptest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(blooptest_OBJECTS) $(blooptest_LDADD) $(LIBS) +cargstest$(EXEEXT): $(cargstest_OBJECTS) $(cargstest_DEPENDENCIES) + @rm -f cargstest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(cargstest_OBJECTS) $(cargstest_LDADD) $(LIBS) +copyrecttest$(EXEEXT): $(copyrecttest_OBJECTS) $(copyrecttest_DEPENDENCIES) + @rm -f copyrecttest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(copyrecttest_OBJECTS) $(copyrecttest_LDADD) $(LIBS) +cursortest$(EXEEXT): $(cursortest_OBJECTS) $(cursortest_DEPENDENCIES) + @rm -f cursortest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(cursortest_OBJECTS) $(cursortest_LDADD) $(LIBS) +encodingstest$(EXEEXT): $(encodingstest_OBJECTS) $(encodingstest_DEPENDENCIES) + @rm -f encodingstest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(encodingstest_OBJECTS) $(encodingstest_LDADD) $(LIBS) +tjbench$(EXEEXT): $(tjbench_OBJECTS) $(tjbench_DEPENDENCIES) + @rm -f tjbench$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tjbench_OBJECTS) $(tjbench_LDADD) $(LIBS) +tjunittest$(EXEEXT): $(tjunittest_OBJECTS) $(tjunittest_DEPENDENCIES) + @rm -f tjunittest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tjunittest_OBJECTS) $(tjunittest_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blooptest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bmp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cargstest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/copyrecttest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cursortest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/encodingstest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tjbench.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tjunittest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tjutil.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/turbojpeg.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +turbojpeg.o: ../common/turbojpeg.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT turbojpeg.o -MD -MP -MF $(DEPDIR)/turbojpeg.Tpo -c -o turbojpeg.o `test -f '../common/turbojpeg.c' || echo '$(srcdir)/'`../common/turbojpeg.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/turbojpeg.Tpo $(DEPDIR)/turbojpeg.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../common/turbojpeg.c' object='turbojpeg.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o turbojpeg.o `test -f '../common/turbojpeg.c' || echo '$(srcdir)/'`../common/turbojpeg.c + +turbojpeg.obj: ../common/turbojpeg.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT turbojpeg.obj -MD -MP -MF $(DEPDIR)/turbojpeg.Tpo -c -o turbojpeg.obj `if test -f '../common/turbojpeg.c'; then $(CYGPATH_W) '../common/turbojpeg.c'; else $(CYGPATH_W) '$(srcdir)/../common/turbojpeg.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/turbojpeg.Tpo $(DEPDIR)/turbojpeg.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../common/turbojpeg.c' object='turbojpeg.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o turbojpeg.obj `if test -f '../common/turbojpeg.c'; then $(CYGPATH_W) '../common/turbojpeg.c'; else $(CYGPATH_W) '$(srcdir)/../common/turbojpeg.c'; fi` + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) +check: check-am +all-am: Makefile $(PROGRAMS) +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ + clean-noinstPROGRAMS mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: check-am install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean \ + clean-checkPROGRAMS clean-generic clean-libtool \ + clean-noinstPROGRAMS ctags distclean distclean-compile \ + distclean-generic distclean-libtool distclean-tags distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am + + +test: encodingstest$(EXEEXT) cargstest$(EXEEXT) copyrecttest$(EXEEXT) + ./encodingstest && ./cargstest + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jni/vnc/LibVNCServer-0.9.9/test/blooptest.c b/jni/vnc/LibVNCServer-0.9.9/test/blooptest.c new file mode 100644 index 0000000..a2661e8 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/test/blooptest.c @@ -0,0 +1,2 @@ +#define BACKGROUND_LOOP_TEST +#include "../examples/example.c" diff --git a/jni/vnc/LibVNCServer-0.9.9/test/bmp.c b/jni/vnc/LibVNCServer-0.9.9/test/bmp.c new file mode 100644 index 0000000..7dcbf13 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/test/bmp.c @@ -0,0 +1,389 @@ +/* Copyright (C)2004 Landmark Graphics Corporation + * Copyright (C)2005 Sun Microsystems, Inc. + * Copyright (C)2010, 2012 D. R. Commander + * + * This library is free software and may be redistributed and/or modified under + * the terms of the wxWindows Library License, Version 3.1 or (at your option) + * any later version. The full license is in the LICENSE.txt file included + * with this distribution. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * wxWindows Library License for more details. +*/ + +#include +#include +#include +#include +#include +#include +#include +#ifdef _WIN32 + #include +#else + #include +#endif +#include "./tjutil.h" +#include "./bmp.h" + +#define byteswap(i) ( \ + (((i) & 0xff000000) >> 24) | \ + (((i) & 0x00ff0000) >> 8) | \ + (((i) & 0x0000ff00) << 8) | \ + (((i) & 0x000000ff) << 24) ) + +#define byteswap16(i) ( \ + (((i) & 0xff00) >> 8) | \ + (((i) & 0x00ff) << 8) ) + +static __inline int littleendian(void) +{ + unsigned int value=1; + unsigned char *ptr=(unsigned char *)(&value); + if(ptr[0]==1 && ptr[3]==0) return 1; + else return 0; +} + +#ifndef BI_BITFIELDS +#define BI_BITFIELDS 3L +#endif +#ifndef BI_RGB +#define BI_RGB 0L +#endif + +#define BMPHDRSIZE 54 +typedef struct _bmphdr +{ + unsigned short bfType; + unsigned int bfSize; + unsigned short bfReserved1, bfReserved2; + unsigned int bfOffBits; + + unsigned int biSize; + int biWidth, biHeight; + unsigned short biPlanes, biBitCount; + unsigned int biCompression, biSizeImage; + int biXPelsPerMeter, biYPelsPerMeter; + unsigned int biClrUsed, biClrImportant; +} bmphdr; + +static const char *__bmperr="No error"; + +static const int ps[BMPPIXELFORMATS]={3, 4, 3, 4, 4, 4}; +static const int roffset[BMPPIXELFORMATS]={0, 0, 2, 2, 3, 1}; +static const int goffset[BMPPIXELFORMATS]={1, 1, 1, 1, 2, 2}; +static const int boffset[BMPPIXELFORMATS]={2, 2, 0, 0, 1, 3}; + +#define _throw(m) {__bmperr=m; retcode=-1; goto finally;} +#define _unix(f) {if((f)==-1) _throw(strerror(errno));} +#define _catch(f) {if((f)==-1) {retcode=-1; goto finally;}} + +#define readme(fd, addr, size) \ + if((bytesread=read(fd, addr, (size)))==-1) _throw(strerror(errno)); \ + if(bytesread!=(size)) _throw("Read error"); + +void pixelconvert(unsigned char *srcbuf, enum BMPPIXELFORMAT srcformat, + int srcpitch, unsigned char *dstbuf, enum BMPPIXELFORMAT dstformat, int dstpitch, + int w, int h, int flip) +{ + unsigned char *srcptr, *srcptr0, *dstptr, *dstptr0; + int i, j; + + srcptr=flip? &srcbuf[srcpitch*(h-1)]:srcbuf; + for(j=0, dstptr=dstbuf; jBMPPIXELFORMATS-1 || align<1) + _throw("invalid argument to loadbmp()"); + if((align&(align-1))!=0) + _throw("Alignment must be a power of 2"); + _unix(fd=open(filename, flags)); + + readme(fd, &bh.bfType, sizeof(unsigned short)); + if(!littleendian()) bh.bfType=byteswap16(bh.bfType); + + if(bh.bfType==0x3650) + { + _catch(loadppm(&fd, buf, w, h, f, align, dstbottomup, 0)); + goto finally; + } + if(bh.bfType==0x3350) + { + _catch(loadppm(&fd, buf, w, h, f, align, dstbottomup, 1)); + goto finally; + } + + readme(fd, &bh.bfSize, sizeof(unsigned int)); + readme(fd, &bh.bfReserved1, sizeof(unsigned short)); + readme(fd, &bh.bfReserved2, sizeof(unsigned short)); + readme(fd, &bh.bfOffBits, sizeof(unsigned int)); + readme(fd, &bh.biSize, sizeof(unsigned int)); + readme(fd, &bh.biWidth, sizeof(int)); + readme(fd, &bh.biHeight, sizeof(int)); + readme(fd, &bh.biPlanes, sizeof(unsigned short)); + readme(fd, &bh.biBitCount, sizeof(unsigned short)); + readme(fd, &bh.biCompression, sizeof(unsigned int)); + readme(fd, &bh.biSizeImage, sizeof(unsigned int)); + readme(fd, &bh.biXPelsPerMeter, sizeof(int)); + readme(fd, &bh.biYPelsPerMeter, sizeof(int)); + readme(fd, &bh.biClrUsed, sizeof(unsigned int)); + readme(fd, &bh.biClrImportant, sizeof(unsigned int)); + + if(!littleendian()) + { + bh.bfSize=byteswap(bh.bfSize); + bh.bfOffBits=byteswap(bh.bfOffBits); + bh.biSize=byteswap(bh.biSize); + bh.biWidth=byteswap(bh.biWidth); + bh.biHeight=byteswap(bh.biHeight); + bh.biPlanes=byteswap16(bh.biPlanes); + bh.biBitCount=byteswap16(bh.biBitCount); + bh.biCompression=byteswap(bh.biCompression); + bh.biSizeImage=byteswap(bh.biSizeImage); + bh.biXPelsPerMeter=byteswap(bh.biXPelsPerMeter); + bh.biYPelsPerMeter=byteswap(bh.biYPelsPerMeter); + bh.biClrUsed=byteswap(bh.biClrUsed); + bh.biClrImportant=byteswap(bh.biClrImportant); + } + + if(bh.bfType!=0x4d42 || bh.bfOffBitsBMPPIXELFORMATS-1 || srcpitch<0) + _throw("bad argument to savebmp()"); + + if(srcpitch==0) srcpitch=w*ps[f]; + + if((temp=strrchr(filename, '.'))!=NULL) + { + if(!strcasecmp(temp, ".ppm")) + return saveppm(filename, buf, w, h, f, srcpitch, srcbottomup); + } + + _unix(fd=open(filename, flags, mode)); + dstpitch=((w*3)+3)&(~3); + + bh.bfType=0x4d42; + bh.bfSize=BMPHDRSIZE+dstpitch*h; + bh.bfReserved1=0; bh.bfReserved2=0; + bh.bfOffBits=BMPHDRSIZE; + bh.biSize=40; + bh.biWidth=w; bh.biHeight=h; + bh.biPlanes=0; bh.biBitCount=24; + bh.biCompression=BI_RGB; bh.biSizeImage=0; + bh.biXPelsPerMeter=0; bh.biYPelsPerMeter=0; + bh.biClrUsed=0; bh.biClrImportant=0; + + if(!littleendian()) + { + bh.bfType=byteswap16(bh.bfType); + bh.bfSize=byteswap(bh.bfSize); + bh.bfOffBits=byteswap(bh.bfOffBits); + bh.biSize=byteswap(bh.biSize); + bh.biWidth=byteswap(bh.biWidth); + bh.biHeight=byteswap(bh.biHeight); + bh.biPlanes=byteswap16(bh.biPlanes); + bh.biBitCount=byteswap16(bh.biBitCount); + bh.biCompression=byteswap(bh.biCompression); + bh.biSizeImage=byteswap(bh.biSizeImage); + bh.biXPelsPerMeter=byteswap(bh.biXPelsPerMeter); + bh.biYPelsPerMeter=byteswap(bh.biYPelsPerMeter); + bh.biClrUsed=byteswap(bh.biClrUsed); + bh.biClrImportant=byteswap(bh.biClrImportant); + } + + writeme(fd, &bh.bfType, sizeof(unsigned short)); + writeme(fd, &bh.bfSize, sizeof(unsigned int)); + writeme(fd, &bh.bfReserved1, sizeof(unsigned short)); + writeme(fd, &bh.bfReserved2, sizeof(unsigned short)); + writeme(fd, &bh.bfOffBits, sizeof(unsigned int)); + writeme(fd, &bh.biSize, sizeof(unsigned int)); + writeme(fd, &bh.biWidth, sizeof(int)); + writeme(fd, &bh.biHeight, sizeof(int)); + writeme(fd, &bh.biPlanes, sizeof(unsigned short)); + writeme(fd, &bh.biBitCount, sizeof(unsigned short)); + writeme(fd, &bh.biCompression, sizeof(unsigned int)); + writeme(fd, &bh.biSizeImage, sizeof(unsigned int)); + writeme(fd, &bh.biXPelsPerMeter, sizeof(int)); + writeme(fd, &bh.biYPelsPerMeter, sizeof(int)); + writeme(fd, &bh.biClrUsed, sizeof(unsigned int)); + writeme(fd, &bh.biClrImportant, sizeof(unsigned int)); + + if((tempbuf=(unsigned char *)malloc(dstpitch*h))==NULL) + _throw("Memory allocation error"); + + pixelconvert(buf, f, srcpitch, tempbuf, BMP_BGR, dstpitch, w, h, + !srcbottomup); + + if((byteswritten=write(fd, tempbuf, dstpitch*h))!=dstpitch*h) + _throw(strerror(errno)); + + finally: + if(tempbuf) free(tempbuf); + if(fd!=-1) close(fd); + return retcode; +} + +const char *bmpgeterr(void) +{ + return __bmperr; +} diff --git a/jni/vnc/LibVNCServer-0.9.9/test/bmp.h b/jni/vnc/LibVNCServer-0.9.9/test/bmp.h new file mode 100644 index 0000000..055b1ee --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/test/bmp.h @@ -0,0 +1,49 @@ +/* Copyright (C)2004 Landmark Graphics Corporation + * Copyright (C)2005 Sun Microsystems, Inc. + * Copyright (C)2011 D. R. Commander + * + * This library is free software and may be redistributed and/or modified under + * the terms of the wxWindows Library License, Version 3.1 or (at your option) + * any later version. The full license is in the LICENSE.txt file included + * with this distribution. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * wxWindows Library License for more details. +*/ + +// This provides rudimentary facilities for loading and saving true color +// BMP and PPM files + +#ifndef __BMP_H__ +#define __BMP_H__ + +#define BMPPIXELFORMATS 6 +enum BMPPIXELFORMAT {BMP_RGB=0, BMP_RGBX, BMP_BGR, BMP_BGRX, BMP_XBGR, BMP_XRGB}; + +#ifdef __cplusplus +extern "C" { +#endif + +// This will load a Windows bitmap from a file and return a buffer with the +// specified pixel format, scanline alignment, and orientation. The width and +// height are returned in w and h. + +int loadbmp(char *filename, unsigned char **buf, int *w, int *h, + enum BMPPIXELFORMAT f, int align, int dstbottomup); + +// This will save a buffer with the specified pixel format, pitch, orientation, +// width, and height as a 24-bit Windows bitmap or PPM (the filename determines +// which format to use) + +int savebmp(char *filename, unsigned char *buf, int w, int h, + enum BMPPIXELFORMAT f, int srcpitch, int srcbottomup); + +const char *bmpgeterr(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/test/cargstest.c b/jni/vnc/LibVNCServer-0.9.9/test/cargstest.c new file mode 100644 index 0000000..e2b97ee --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/test/cargstest.c @@ -0,0 +1,32 @@ +#include + +int main(int argc,char** argv) +{ + int fake_argc=6; + char* fake_argv[6]={ + "dummy_program","-alwaysshared","-httpport","3002","-nothing","-dontdisconnect" + }; + rfbScreenInfoPtr screen; + rfbBool ret=0; + + screen = rfbGetScreen(&fake_argc,fake_argv,1024,768,8,3,1); + if(!screen) + return 0; + +#define CHECK(a,b) if(screen->a!=b) { fprintf(stderr,#a " is %d (should be " #b ")\n",screen->a); ret=1; } + CHECK(width,1024); + CHECK(height,768); + CHECK(alwaysShared,TRUE); + CHECK(httpPort,3002); + CHECK(dontDisconnect,TRUE); + if(fake_argc!=2) { + fprintf(stderr,"fake_argc is %d (should be 2)\n",fake_argc); + ret=1; + } + if(strcmp(fake_argv[1],"-nothing")) { + fprintf(stderr,"fake_argv[1] is %s (should be -nothing)\n",fake_argv[1]); + ret=1; + } + return ret; +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/test/copyrecttest.c b/jni/vnc/LibVNCServer-0.9.9/test/copyrecttest.c new file mode 100644 index 0000000..cd2a504 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/test/copyrecttest.c @@ -0,0 +1,55 @@ +#ifdef __STRICT_ANSI__ +#define _BSD_SOURCE +#endif +#include +#include + +static void initBackground(rfbScreenInfoPtr server) +{ + unsigned int i,j; + + for(i=0;iwidth;i++) + for(j=0;jheight;j++) { + server->frameBuffer[(j*server->width+i)*4+0]=i&0xff; + server->frameBuffer[(j*server->width+i)*4+1]=j&0xff; + server->frameBuffer[(j*server->width+i)*4+2]=(i*j)&0xff; + } +} + +int main(int argc,char** argv) +{ + int width=400,height=300,w=20,x,y; + double r,phi=0; + + rfbScreenInfoPtr server=rfbGetScreen(&argc,argv,width,height,8,3,4); + if(!server) + return 0; + server->frameBuffer=(char*)malloc(width*height*4); + initBackground(server); + server->deferUpdateTime=0; + rfbInitServer(server); + + r=0; + while(1) { + if(r<=0) { + initBackground(server); + rfbMarkRectAsModified(server,0,0,width,height); + r=0.43; + phi=0; + } else { + r-=0.0001; + phi+=0.02; + if(phi>2*M_PI) + phi-=2*M_PI; + } + x=width*(0.5+cos(phi)*r); + y=height*(0.5+sin(phi)*r); + if(x>=0 && y>=0 && x+w<=width && y+w<=height) { + unsigned int dx=width*0.5*(1-cos(phi)*r)-x, + dy=height*0.5*(1-sin(phi)*r)-y; + rfbDoCopyRect(server,x,y,x+w,y+w,-dx,-dy); + } + rfbProcessEvents(server,50000); + } + return(0); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/test/cursortest.c b/jni/vnc/LibVNCServer-0.9.9/test/cursortest.c new file mode 100644 index 0000000..78c37e3 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/test/cursortest.c @@ -0,0 +1,353 @@ +/* + * + * This is an example of how to use libvncserver. + * + * libvncserver example + * Copyright (C) 2005 Johannes E. Schindelin , + * Karl Runge + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this software; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include + +static const int bpp=4; +static int maxx=800, maxy=600; + +/* This initializes a nice (?) background */ + +static void initBuffer(unsigned char* buffer) +{ + int i,j; + for(j=0;jxhot=width/2;c->yhot=height/2; + + rfbSetCursor(rfbScreen, c); +} + +static void SetXCursor2(rfbScreenInfoPtr rfbScreen) +{ + int width=13,height=22; + char cursor[]= + " xx " + " x x " + " x x " + " x x " + " x x " + " x x " + " x x " + " x x " + " x xx x " + " x x x xxx " + " x xx x x " + " xx x x " + " xx x x " + " x x x " + " x x x " + " x x " + " x x " + " x x " + " xx " + " " + " ", + mask[]= + "xxx " + "xxxx " + "xxxxx " + "xxxxxx " + "xxxxxxx " + "xxxxxxxx " + "xxxxxxxxx " + "xxxxxxxxxx " + "xxxxxxxxxxx " + "xxxxxxxxxxxx " + "xxxxxxxxxxxxx" + "xxxxxxxxxxxxx" + "xxxxxxxxxx x" + "xxxxxxxxxx " + "xxx xxxxxx " + "xxx xxxxxx " + "xx xxxxxx " + " xxxxx " + " xxxxxx" + " xxxxx" + " xxx " + " "; + rfbCursorPtr c; + + c=rfbMakeXCursor(width,height,cursor,mask); + c->xhot=0;c->yhot=0; + + rfbSetCursor(rfbScreen, c); +} + +/* Example for a rich cursor (full-colour) */ + +static void SetRichCursor(rfbScreenInfoPtr rfbScreen) +{ + int i,j,w=32,h=32; + /* runge */ + /* rfbCursorPtr c = rfbScreen->cursor; */ + rfbCursorPtr c; + char bitmap[]= + " " + " xxxxxx " + " xxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxx " + " xxxxx xxxxxxxx xxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxx xxxxxxxxxxx xxxxxxx " + " xxxx xxxxxxxxx xxxxxx " + " xxxxx xxxxxxxxxxx xxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxx xxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxx xxxxxxxxxxxxxx " + " xxxxxxxxxx xxxxxxxxxxxx " + " xxxxxxxxx xxxxxxxxx " + " xxxxxxxxxx xxxxxxxxx " + " xxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxx " + " xxxx xxxxxxxxxxxxx " + " xx x xxxxxxxxxxx " + " xxx xxxxxxxxxxx " + " xxxx xxxxxxxxxxx " + " xxxxxx xxxxxxxxxxxx " + " xxxxxxxxxxxxxxxxxxxxxx " + " xxxxxxxxxxxxxxxx " + " "; + + c=rfbMakeXCursor(w,h,bitmap,bitmap); + c->xhot = 16; c->yhot = 24; + + c->richSource = (char*)malloc(w*h*bpp); + for(j=0;jrichSource[j*w*bpp+i*bpp+0]=i*0xff/w; + c->richSource[j*w*bpp+i*bpp+1]=(i+j)*0xff/(w+h); + c->richSource[j*w*bpp+i*bpp+2]=j*0xff/h; + c->richSource[j*w*bpp+i*bpp+3]=0; + } + } + rfbSetCursor(rfbScreen, c); +} + +/* runge */ +static void SetRichCursor2(rfbScreenInfoPtr rfbScreen) +{ + int i,j,w=17,h=16; + /* rfbCursorPtr c = rfbScreen->cursor; */ + rfbCursorPtr c; + char bitmap[]= + " " + "xxxx " + "xxxxxxxx " + "xxxxxxxxxxxx x" + "xxx xxxxxxxx x" + "xxxxxxxxxxxxxx x" + "xxxxxxxxxxxxxxx x" + "xxxxx xxxxxxx x" + "xxxx xxxxxx x" + "xxxxx xxxxxxx x" + "xxxxxxxxxxxxxxx x" + "xxxxxxxxxxxxxxx x" + "xxxxxxxxxxxxxx x" + "xxxxxxxxxxxxx x" + "xxxxxxxxxxxxx x" + "xxxxxxxxxxxxx x"; + /* c=rfbScreen->cursor = rfbMakeXCursor(w,h,bitmap,bitmap); */ + c=rfbMakeXCursor(w,h,bitmap,bitmap); + c->xhot = 5; c->yhot = 7; + + c->richSource = (char*)malloc(w*h*bpp); + for(j=0;jrichSource[j*w*bpp+i*bpp+0]=0xff; + c->richSource[j*w*bpp+i*bpp+1]=0x00; + c->richSource[j*w*bpp+i*bpp+2]=0x7f; + c->richSource[j*w*bpp+i*bpp+3]=0; + } + } + rfbSetCursor(rfbScreen, c); +} + +/* alpha channel */ + +static void SetAlphaCursor(rfbScreenInfoPtr screen,int mode) +{ + int i,j; + rfbCursorPtr c = screen->cursor; + int maskStride=(c->width+7)/8; + + if(!c) + return; + + if(c->alphaSource) { + free(c->alphaSource); + c->alphaSource=NULL; + } + + if(mode==0) + return; + + c->alphaSource = (unsigned char*)malloc(c->width*c->height); + + for(j=0;jheight;j++) + for(i=0;iwidth;i++) { + unsigned char value=0x100*i/c->width; + rfbBool masked=(c->mask[(i/8)+maskStride*j]<<(i&7))&0x80; + c->alphaSource[i+c->width*j]=(masked?(mode==1?value:0xff-value):0); + } + if(c->cleanupMask) + free(c->mask); + c->mask=rfbMakeMaskFromAlphaSource(c->width,c->height,c->alphaSource); + c->cleanupMask=TRUE; +} + +/* Here the pointer events are handled */ + +static void doptr(int buttonMask,int x,int y,rfbClientPtr cl) +{ + static int oldButtonMask=0; + static int counter=0; + + if((oldButtonMask&1)==0 && (buttonMask&1)==1) { + switch(++counter) { + case 7: + SetRichCursor(cl->screen); + SetAlphaCursor(cl->screen,2); + break; + case 6: + SetRichCursor(cl->screen); + SetAlphaCursor(cl->screen,1); + break; + case 5: + SetRichCursor2(cl->screen); + SetAlphaCursor(cl->screen,0); + break; + case 4: + SetXCursor(cl->screen); + break; + case 3: + SetRichCursor2(cl->screen); + SetAlphaCursor(cl->screen,2); + break; + case 2: + SetXCursor(cl->screen); + SetAlphaCursor(cl->screen,2); + break; + case 1: + SetXCursor2(cl->screen); + SetAlphaCursor(cl->screen,0); + break; + default: + SetRichCursor(cl->screen); + counter=0; + } + } + if(buttonMask&2) { + rfbScreenCleanup(cl->screen); + exit(0); + } + + if(buttonMask&4) + rfbCloseClient(cl); + + + oldButtonMask=buttonMask; + + rfbDefaultPtrAddEvent(buttonMask,x,y,cl); +} + +/* Initialization */ + +int main(int argc,char** argv) +{ + rfbScreenInfoPtr rfbScreen = rfbGetScreen(&argc,argv,maxx,maxy,8,3,bpp); + if(!rfbScreen) + return 0; + + rfbScreen->desktopName = "Cursor Test"; + rfbScreen->frameBuffer = (char*)malloc(maxx*maxy*bpp); + rfbScreen->ptrAddEvent = doptr; + + initBuffer((unsigned char*)rfbScreen->frameBuffer); + + + SetRichCursor(rfbScreen); + + /* initialize the server */ + rfbInitServer(rfbScreen); + + rfbLog("Change cursor shape with left mouse button,\n\t" + "quit with right one (middle button quits server).\n"); + + /* this is the blocking event loop, i.e. it never returns */ + /* 40000 are the microseconds to wait on select(), i.e. 0.04 seconds */ + rfbRunEventLoop(rfbScreen,40000,FALSE); + + free(rfbScreen->frameBuffer); + rfbScreenCleanup(rfbScreen); + + return(0); +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/test/encodingstest.c b/jni/vnc/LibVNCServer-0.9.9/test/encodingstest.c new file mode 100644 index 0000000..e79f7e7 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/test/encodingstest.c @@ -0,0 +1,338 @@ +#ifdef __STRICT_ANSI__ +#define _BSD_SOURCE +#endif +#include +#include +#include +#include + +#ifndef LIBVNCSERVER_HAVE_LIBPTHREAD +#error This test need pthread support (otherwise the client blocks the client) +#endif + +#define ALL_AT_ONCE +/*#define VERY_VERBOSE*/ + +static MUTEX(frameBufferMutex); + +typedef struct { int id; char* str; } encoding_t; +static encoding_t testEncodings[]={ + { rfbEncodingRaw, "raw" }, + { rfbEncodingRRE, "rre" }, + { rfbEncodingCoRRE, "corre" }, + { rfbEncodingHextile, "hextile" }, + { rfbEncodingUltra, "ultra" }, +#ifdef LIBVNCSERVER_HAVE_LIBZ + { rfbEncodingZlib, "zlib" }, + { rfbEncodingZlibHex, "zlibhex" }, + { rfbEncodingZRLE, "zrle" }, + { rfbEncodingZYWRLE, "zywrle" }, +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + { rfbEncodingTight, "tight" }, +#endif +#endif + { 0, NULL } +}; + +#define NUMBER_OF_ENCODINGS_TO_TEST (sizeof(testEncodings)/sizeof(encoding_t)-1) +/*#define NUMBER_OF_ENCODINGS_TO_TEST 1*/ + +/* Here come the variables/functions to handle the test output */ + +static const int width=400,height=300; +static unsigned int statistics[2][NUMBER_OF_ENCODINGS_TO_TEST]; +static unsigned int totalFailed,totalCount; +static unsigned int countGotUpdate; +static MUTEX(statisticsMutex); + +static void initStatistics(void) { + memset(statistics[0],0,sizeof(int)*NUMBER_OF_ENCODINGS_TO_TEST); + memset(statistics[1],0,sizeof(int)*NUMBER_OF_ENCODINGS_TO_TEST); + totalFailed=totalCount=0; + INIT_MUTEX(statisticsMutex); +} + + +static void updateStatistics(int encodingIndex,rfbBool failed) { + LOCK(statisticsMutex); + if(failed) { + statistics[1][encodingIndex]++; + totalFailed++; + } + statistics[0][encodingIndex]++; + totalCount++; + countGotUpdate++; + UNLOCK(statisticsMutex); +} + +/* Here begin the functions for the client. They will be called in a + * pthread. */ + +/* maxDelta=0 means they are expected to match exactly; + * maxDelta>0 means that the average difference must be lower than maxDelta */ +static rfbBool doFramebuffersMatch(rfbScreenInfo* server,rfbClient* client, + int maxDelta) +{ + int i,j,k; + unsigned int total=0,diff=0; + if(server->width!=client->width || server->height!=client->height) + return FALSE; + LOCK(frameBufferMutex); + /* TODO: write unit test for colour transformation, use here, too */ + for(i=0;iwidth;i++) + for(j=0;jheight;j++) + for(k=0;k<3/*server->serverFormat.bitsPerPixel/8*/;k++) { + unsigned char s=server->frameBuffer[k+i*4+j*server->paddedWidthInBytes]; + unsigned char cl=client->frameBuffer[k+i*4+j*client->width*4]; + + if(maxDelta==0 && s!=cl) { + UNLOCK(frameBufferMutex); + return FALSE; + } else { + total++; + diff+=(s>cl?s-cl:cl-s); + } + } + UNLOCK(frameBufferMutex); + if(maxDelta>0 && diff/total>=maxDelta) + return FALSE; + return TRUE; +} + +static rfbBool resize(rfbClient* cl) { + if(cl->frameBuffer) + free(cl->frameBuffer); + cl->frameBuffer=malloc(cl->width*cl->height*cl->format.bitsPerPixel/8); + if(!cl->frameBuffer) + return FALSE; + SendFramebufferUpdateRequest(cl,0,0,cl->width,cl->height,FALSE); + return TRUE; +} + +typedef struct clientData { + int encodingIndex; + rfbScreenInfo* server; + char* display; +} clientData; + +static void update(rfbClient* client,int x,int y,int w,int h) { +#ifndef VERY_VERBOSE + + static const char* progress="|/-\\"; + static int counter=0; + + if(++counter>sizeof(progress)) counter=0; + fprintf(stderr,"%c\r",progress[counter]); +#else + clientData* cd=(clientData*)client->clientData; + rfbClientLog("Got update (encoding=%s): (%d,%d)-(%d,%d)\n", + testEncodings[cd->encodingIndex].str, + x,y,x+w,y+h); +#endif +} + +static void update_finished(rfbClient* client) { + clientData* cd=(clientData*)client->clientData; + int maxDelta=0; + +#ifdef LIBVNCSERVER_HAVE_LIBZ + if(testEncodings[cd->encodingIndex].id==rfbEncodingZYWRLE) + maxDelta=5; +#ifdef LIBVNCSERVER_HAVE_LIBJPEG + if(testEncodings[cd->encodingIndex].id==rfbEncodingTight) + maxDelta=5; +#endif +#endif + updateStatistics(cd->encodingIndex, + !doFramebuffersMatch(cd->server,client,maxDelta)); +} + + +static void* clientLoop(void* data) { + rfbClient* client=(rfbClient*)data; + clientData* cd=(clientData*)client->clientData; + + client->appData.encodingsString=strdup(testEncodings[cd->encodingIndex].str); + client->appData.qualityLevel = 7; /* ZYWRLE fails the test with standard settings */ + + sleep(1); + rfbClientLog("Starting client (encoding %s, display %s)\n", + testEncodings[cd->encodingIndex].str, + cd->display); + if(!rfbInitClient(client,NULL,NULL)) { + rfbClientErr("Had problems starting client (encoding %s)\n", + testEncodings[cd->encodingIndex].str); + updateStatistics(cd->encodingIndex,TRUE); + return NULL; + } + while(1) { + if(WaitForMessage(client,50)>=0) + if(!HandleRFBServerMessage(client)) + break; + } + free(((clientData*)client->clientData)->display); + free(client->clientData); + if(client->frameBuffer) + free(client->frameBuffer); + rfbClientCleanup(client); + return NULL; +} + +static pthread_t all_threads[NUMBER_OF_ENCODINGS_TO_TEST]; +static int thread_counter; + +static void startClient(int encodingIndex,rfbScreenInfo* server) { + rfbClient* client=rfbGetClient(8,3,4); + clientData* cd; + + client->clientData=malloc(sizeof(clientData)); + client->MallocFrameBuffer=resize; + client->GotFrameBufferUpdate=update; + client->FinishedFrameBufferUpdate=update_finished; + + cd=(clientData*)client->clientData; + cd->encodingIndex=encodingIndex; + cd->server=server; + cd->display=(char*)malloc(6); + sprintf(cd->display,":%d",server->port-5900); + + pthread_create(&all_threads[thread_counter++],NULL,clientLoop,(void*)client); +} + +/* Here begin the server functions */ + +static void idle(rfbScreenInfo* server) +{ + int c; + rfbBool goForward; + + LOCK(statisticsMutex); +#ifdef ALL_AT_ONCE + goForward=(countGotUpdate==NUMBER_OF_ENCODINGS_TO_TEST); +#else + goForward=(countGotUpdate==1); +#endif + + UNLOCK(statisticsMutex); + if(!goForward) + return; + countGotUpdate=0; + + LOCK(frameBufferMutex); + { + int i,j; + int x1=(rand()%(server->width-1)),x2=(rand()%(server->width-1)), + y1=(rand()%(server->height-1)),y2=(rand()%(server->height-1)); + if(x1>x2) { i=x1; x1=x2; x2=i; } + if(y1>y2) { i=y1; y1=y2; y2=i; } + x2++; y2++; + for(c=0;c<3;c++) { + for(i=x1;iframeBuffer[i*4+c+j*server->paddedWidthInBytes]=255*(i-x1+j-y1)/(x2-x1+y2-y1); + } + rfbMarkRectAsModified(server,x1,y1,x2,y2); + +#ifdef VERY_VERBOSE + rfbLog("Sent update (%d,%d)-(%d,%d)\n",x1,y1,x2,y2); +#endif + } + UNLOCK(frameBufferMutex); +} + +/* log function (to show what messages are from the client) */ + +static void +rfbTestLog(const char *format, ...) +{ + va_list args; + char buf[256]; + time_t log_clock; + + if(!rfbEnableClientLogging) + return; + + va_start(args, format); + + time(&log_clock); + strftime(buf, 255, "%d/%m/%Y %X (client) ", localtime(&log_clock)); + fprintf(stderr,buf); + + vfprintf(stderr, format, args); + fflush(stderr); + + va_end(args); +} + +/* the main function */ + +int main(int argc,char** argv) +{ + int i,j; + time_t t; + rfbScreenInfoPtr server; + + rfbClientLog=rfbTestLog; + rfbClientErr=rfbTestLog; + + /* Initialize server */ + server=rfbGetScreen(&argc,argv,width,height,8,3,4); + if(!server) + return 0; + + server->frameBuffer=malloc(400*300*4); + server->cursor=NULL; + for(j=0;j<400*300*4;j++) + server->frameBuffer[j]=j; + rfbInitServer(server); + rfbProcessEvents(server,0); + + initStatistics(); + +#ifndef ALL_AT_ONCE + for(i=0;iframeBuffer); + rfbScreenCleanup(server); + + rfbLog("Statistics:\n"); + for(i=0;i +#include +#include +#include +#include +#include "./bmp.h" +#include "./tjutil.h" +#include "./turbojpeg.h" + + +#define _throw(op, err) { \ + printf("ERROR in line %d while %s:\n%s\n", __LINE__, op, err); \ + (void)retval; /* silence warning */ \ + retval=-1; goto bailout;} +#define _throwunix(m) _throw(m, strerror(errno)) +#define _throwtj(m) _throw(m, tjGetErrorStr()) +#define _throwbmp(m) _throw(m, bmpgeterr()) + +int flags=0, decomponly=0, quiet=0, dotile=0, pf=TJPF_BGR; +char *ext="ppm"; +const char *pixFormatStr[TJ_NUMPF]= +{ + "RGB", "BGR", "RGBX", "BGRX", "XBGR", "XRGB", "GRAY" +}; +const int bmpPF[TJ_NUMPF]= +{ + BMP_RGB, BMP_BGR, BMP_RGBX, BMP_BGRX, BMP_XBGR, BMP_XRGB, -1 +}; +const char *subNameLong[TJ_NUMSAMP]= +{ + "4:4:4", "4:2:2", "4:2:0", "GRAY", "4:4:0" +}; +const char *subName[NUMSUBOPT]={"444", "422", "420", "GRAY", "440"}; +tjscalingfactor *scalingfactors=NULL, sf={1, 1}; int nsf=0; +double benchtime=5.0; + + +char *sigfig(double val, int figs, char *buf, int len) +{ + char format[80]; + int digitsafterdecimal=figs-(int)ceil(log10(fabs(val))); + if(digitsafterdecimal<1) snprintf(format, 80, "%%.0f"); + else snprintf(format, 80, "%%.%df", digitsafterdecimal); + snprintf(buf, len, format, val); + return buf; +} + + +/* Decompression test */ +int decomptest(unsigned char *srcbuf, unsigned char **jpegbuf, + unsigned long *jpegsize, unsigned char *dstbuf, int w, int h, + int subsamp, int jpegqual, char *filename, int tilew, int tileh) +{ + char tempstr[1024], sizestr[20]="\0", qualstr[6]="\0", *ptr; + FILE *file=NULL; tjhandle handle=NULL; + int row, col, i, dstbufalloc=0, retval=0; + double start, elapsed; + int ps=tjPixelSize[pf]; + int bufsize; + int scaledw=TJSCALED(w, sf); + int scaledh=TJSCALED(h, sf); + int pitch=scaledw*ps; + int ntilesw=(w+tilew-1)/tilew, ntilesh=(h+tileh-1)/tileh; + unsigned char *dstptr, *dstptr2; + + if(jpegqual>0) + { + snprintf(qualstr, 6, "_Q%d", jpegqual); + qualstr[5]=0; + } + + if((handle=tjInitDecompress())==NULL) + _throwtj("executing tjInitDecompress()"); + + bufsize=pitch*scaledh; + if(dstbuf==NULL) + { + if((dstbuf=(unsigned char *)malloc(bufsize)) == NULL) + _throwunix("allocating image buffer"); + dstbufalloc=1; + } + /* Set the destination buffer to gray so we know whether the decompressor + attempted to write to it */ + memset(dstbuf, 127, bufsize); + + /* Execute once to preload cache */ + if(tjDecompress2(handle, jpegbuf[0], jpegsize[0], dstbuf, scaledw, + pitch, scaledh, pf, flags)==-1) + _throwtj("executing tjDecompress2()"); + + /* Benchmark */ + for(i=0, start=gettime(); (elapsed=gettime()-start) Frame rate: %f fps\n", (double)i/elapsed); + printf(" Dest. throughput: %f Megapixels/sec\n", + (double)(w*h)/1000000.*(double)i/elapsed); + } + if(sf.num!=1 || sf.denom!=1) + snprintf(sizestr, 20, "%d_%d", sf.num, sf.denom); + else if(tilew!=w || tileh!=h) + snprintf(sizestr, 20, "%dx%d", tilew, tileh); + else snprintf(sizestr, 20, "full"); + if(decomponly) + snprintf(tempstr, 1024, "%s_%s.%s", filename, sizestr, ext); + else + snprintf(tempstr, 1024, "%s_%s%s_%s.%s", filename, subName[subsamp], + qualstr, sizestr, ext); + if(savebmp(tempstr, dstbuf, scaledw, scaledh, bmpPF[pf], pitch, + (flags&TJFLAG_BOTTOMUP)!=0)==-1) + _throwbmp("saving bitmap"); + ptr=strrchr(tempstr, '.'); + snprintf(ptr, 1024-(ptr-tempstr), "-err.%s", ext); + if(srcbuf && sf.num==1 && sf.denom==1) + { + if(!quiet) printf("Compression error written to %s.\n", tempstr); + if(subsamp==TJ_GRAYSCALE) + { + int index, index2; + for(row=0, index=0; row255) y=255; if(y<0) y=0; + dstbuf[rindex]=abs(dstbuf[rindex]-y); + dstbuf[gindex]=abs(dstbuf[gindex]-y); + dstbuf[bindex]=abs(dstbuf[bindex]-y); + } + } + } + else + { + for(row=0; row>>>> %s (%s) <--> JPEG %s Q%d <<<<<\n", pixFormatStr[pf], + (flags&TJFLAG_BOTTOMUP)? "Bottom-up":"Top-down", subNameLong[subsamp], + jpegqual); + + for(tilew=dotile? 8:w, tileh=dotile? 8:h; ; tilew*=2, tileh*=2) + { + if(tilew>w) tilew=w; if(tileh>h) tileh=h; + ntilesw=(w+tilew-1)/tilew; ntilesh=(h+tileh-1)/tileh; + + if((jpegbuf=(unsigned char **)malloc(sizeof(unsigned char *) + *ntilesw*ntilesh))==NULL) + _throwunix("allocating JPEG tile array"); + memset(jpegbuf, 0, sizeof(unsigned char *)*ntilesw*ntilesh); + if((jpegsize=(unsigned long *)malloc(sizeof(unsigned long) + *ntilesw*ntilesh))==NULL) + _throwunix("allocating JPEG size array"); + memset(jpegsize, 0, sizeof(unsigned long)*ntilesw*ntilesh); + + for(i=0; i Frame rate: %f fps\n", (double)i/elapsed); + printf(" Output image size: %d bytes\n", totaljpegsize); + printf(" Compression ratio: %f:1\n", + (double)(w*h*ps)/(double)totaljpegsize); + printf(" Source throughput: %f Megapixels/sec\n", + (double)(w*h)/1000000.*(double)i/elapsed); + printf(" Output bit stream: %f Megabits/sec\n", + (double)totaljpegsize*8./1000000.*(double)i/elapsed); + } + if(tilew==w && tileh==h) + { + snprintf(tempstr, 1024, "%s_%s_Q%d.jpg", filename, subName[subsamp], + jpegqual); + if((file=fopen(tempstr, "wb"))==NULL) + _throwunix("opening reference image"); + if(fwrite(jpegbuf[0], jpegsize[0], 1, file)!=1) + _throwunix("writing reference image"); + fclose(file); file=NULL; + if(!quiet) printf("Reference image written to %s\n", tempstr); + } + + /* Decompression test */ + if(decomptest(srcbuf, jpegbuf, jpegsize, tmpbuf, w, h, subsamp, jpegqual, + filename, tilew, tileh)==-1) + goto bailout; + + for(i=0; i>>>> JPEG %s --> %s (%s) <<<<<\n", subNameLong[subsamp], + pixFormatStr[pf], (flags&TJFLAG_BOTTOMUP)? "Bottom-up":"Top-down"); + } + + for(tilew=dotile? 16:w, tileh=dotile? 16:h; ; tilew*=2, tileh*=2) + { + if(tilew>w) tilew=w; if(tileh>h) tileh=h; + ntilesw=(w+tilew-1)/tilew; ntilesh=(h+tileh-1)/tileh; + + if((jpegbuf=(unsigned char **)malloc(sizeof(unsigned char *) + *ntilesw*ntilesh))==NULL) + _throwunix("allocating JPEG tile array"); + memset(jpegbuf, 0, sizeof(unsigned char *)*ntilesw*ntilesh); + if((jpegsize=(unsigned long *)malloc(sizeof(unsigned long) + *ntilesw*ntilesh))==NULL) + _throwunix("allocating JPEG size array"); + memset(jpegsize, 0, sizeof(unsigned long)*ntilesw*ntilesh); + + for(i=0; i %d x %d", TJSCALED(_w, sf), TJSCALED(_h, sf)); + printf("\n"); + } + else if(quiet==1) + { + printf("%s\t%s\t%s\t", pixFormatStr[pf], + (flags&TJFLAG_BOTTOMUP)? "BU":"TD", subNameLong[subsamp]); + printf("%-4d %-4d\t", tilew, tileh); + } + + _subsamp=subsamp; + if(quiet==1) printf("N/A\tN/A\t"); + jpegsize[0]=srcsize; + memcpy(jpegbuf[0], srcbuf, srcsize); + + if(w==tilew) _tilew=_w; + if(h==tileh) _tileh=_h; + if(decomptest(NULL, jpegbuf, jpegsize, NULL, _w, _h, _subsamp, 0, + filename, _tilew, _tileh)==-1) + goto bailout; + else if(quiet==1) printf("N/A\n"); + + for(i=0; i <%% Quality> [options]\n\n"); + printf(" %s\n", progname); + printf(" [options]\n\n"); + printf("Options:\n\n"); + printf("-bmp = Generate output images in Windows Bitmap format (default=PPM)\n"); + printf("-bottomup = Test bottom-up compression/decompression\n"); + printf("-tile = Test performance of the codec when the image is encoded as separate\n"); + printf(" tiles of varying sizes.\n"); + printf("-forcemmx, -forcesse, -forcesse2, -forcesse3 =\n"); + printf(" Force MMX, SSE, SSE2, or SSE3 code paths in the underlying codec\n"); + printf("-rgb, -bgr, -rgbx, -bgrx, -xbgr, -xrgb =\n"); + printf(" Test the specified color conversion path in the codec (default: BGR)\n"); + printf("-fastupsample = Use fast, inaccurate upsampling code to perform 4:2:2 and 4:2:0\n"); + printf(" YUV decoding\n"); + printf("-quiet = Output results in tabular rather than verbose format\n"); + printf("-scale M/N = scale down the width/height of the decompressed JPEG image by a\n"); + printf(" factor of M/N (M/N = "); + for(i=0; i2) + { + if(i!=nsf-1) printf(", "); + if(i==nsf-2) printf("or "); + } + } + printf(")\n"); + printf("-benchtime = Run each benchmark for at least seconds (default = 5.0)\n\n"); + printf("NOTE: If the quality is specified as a range (e.g. 90-100), a separate\n"); + printf("test will be performed for all quality values in the range.\n\n"); + exit(1); +} + + +int main(int argc, char *argv[]) +{ + unsigned char *srcbuf=NULL; int w, h, i, j; + int minqual=-1, maxqual=-1; char *temp; + int minarg=2; int retval=0; + + if((scalingfactors=tjGetScalingFactors(&nsf))==NULL || nsf==0) + _throwtj("executing tjGetScalingFactors()"); + + if(argc100) + { + puts("ERROR: Quality must be between 1 and 100."); + exit(1); + } + if((temp=strchr(argv[2], '-'))!=NULL && strlen(temp)>1 + && sscanf(&temp[1], "%d", &maxqual)==1 && maxqual>minqual && maxqual>=1 + && maxqual<=100) {} + else maxqual=minqual; + } + + if(argc>minarg) + { + for(i=minarg; i0.0) benchtime=temp; + else usage(argv[0]); + } + if(!strcmp(argv[i], "-?")) usage(argv[0]); + if(!strcasecmp(argv[i], "-bmp")) ext="bmp"; + } + } + + if((sf.num!=1 || sf.denom!=1) && dotile) + { + printf("Disabling tiled compression/decompression tests, because those tests do not\n"); + printf("work when scaled decompression is enabled.\n"); + dotile=0; + } + + if(!decomponly) + { + if(loadbmp(argv[1], &srcbuf, &w, &h, bmpPF[pf], 1, + (flags&TJFLAG_BOTTOMUP)!=0)==-1) + _throwbmp("loading bitmap"); + temp=strrchr(argv[1], '.'); + if(temp!=NULL) *temp='\0'; + } + + if(quiet==1 && !decomponly) + { + printf("All performance values in Mpixels/sec\n\n"); + printf("Bitmap\tBitmap\tJPEG\tJPEG\t%s %s \tComp\tComp\tDecomp\n", + dotile? "Tile ":"Image", dotile? "Tile ":"Image"); + printf("Format\tOrder\tSubsamp\tQual\tWidth Height\tPerf \tRatio\tPerf\n\n"); + } + + if(decomponly) + { + dodecomptest(argv[1]); + printf("\n"); + goto bailout; + } + for(i=maxqual; i>=minqual; i--) + dotest(srcbuf, w, h, TJ_GRAYSCALE, i, argv[1]); + printf("\n"); + for(i=maxqual; i>=minqual; i--) + dotest(srcbuf, w, h, TJ_420, i, argv[1]); + printf("\n"); + for(i=maxqual; i>=minqual; i--) + dotest(srcbuf, w, h, TJ_422, i, argv[1]); + printf("\n"); + for(i=maxqual; i>=minqual; i--) + dotest(srcbuf, w, h, TJ_444, i, argv[1]); + printf("\n"); + + bailout: + if(srcbuf) free(srcbuf); + return retval; +} diff --git a/jni/vnc/LibVNCServer-0.9.9/test/tjunittest.c b/jni/vnc/LibVNCServer-0.9.9/test/tjunittest.c new file mode 100644 index 0000000..c9960eb --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/test/tjunittest.c @@ -0,0 +1,461 @@ +/* + * Copyright (C)2009-2012 D. R. Commander. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * - Neither the name of the libjpeg-turbo Project nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS", + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * This program tests the various code paths in the TurboJPEG C Wrapper + */ + +#include +#include +#include +#include +#include "./tjutil.h" +#include "./turbojpeg.h" +#ifdef _WIN32 + #include + #define random() rand() +#endif + + +#define _throwtj() {printf("TurboJPEG ERROR:\n%s\n", tjGetErrorStr()); \ + bailout();} +#define _tj(f) {if((f)==-1) _throwtj();} +#define _throw(m) {printf("ERROR: %s\n", m); bailout();} + +const char *subNameLong[TJ_NUMSAMP]= +{ + "4:4:4", "4:2:2", "4:2:0", "GRAY", "4:4:0" +}; +const char *subName[TJ_NUMSAMP]={"444", "422", "420", "GRAY", "440"}; + +const char *pixFormatStr[TJ_NUMPF]= +{ + "RGB", "BGR", "RGBX", "BGRX", "XBGR", "XRGB", "Grayscale", + "RGBA", "BGRA", "ABGR", "ARGB" +}; + +const int alphaOffset[TJ_NUMPF] = {-1, -1, -1, -1, -1, -1, -1, 3, 3, 0, 0}; + +const int _3byteFormats[]={TJPF_RGB, TJPF_BGR}; +const int _4byteFormats[]={TJPF_RGBX, TJPF_BGRX, TJPF_XBGR, TJPF_XRGB}; +const int _onlyGray[]={TJPF_GRAY}; +const int _onlyRGB[]={TJPF_RGB}; + +int exitStatus=0; +#define bailout() {exitStatus=-1; goto bailout;} + + +void initBuf(unsigned char *buf, int w, int h, int pf, int flags) +{ + int roffset=tjRedOffset[pf]; + int goffset=tjGreenOffset[pf]; + int boffset=tjBlueOffset[pf]; + int ps=tjPixelSize[pf]; + int index, row, col, halfway=16; + + memset(buf, 0, w*h*ps); + if(pf==TJPF_GRAY) + { + for(row=0; row=halfway) buf[index*ps+goffset]=255; + } + } + } + } +} + + +#define checkval(v, cv) { \ + if(vcv+1) { \ + printf("\nComp. %s at %d,%d should be %d, not %d\n", \ + #v, row, col, cv, v); \ + retval=0; exitStatus=-1; goto bailout; \ + }} + +#define checkval0(v) { \ + if(v>1) { \ + printf("\nComp. %s at %d,%d should be 0, not %d\n", #v, row, col, v); \ + retval=0; exitStatus=-1; goto bailout; \ + }} + +#define checkval255(v) { \ + if(v<254) { \ + printf("\nComp. %s at %d,%d should be 255, not %d\n", #v, row, col, v); \ + retval=0; exitStatus=-1; goto bailout; \ + }} + + +int checkBuf(unsigned char *buf, int w, int h, int pf, int subsamp, + tjscalingfactor sf, int flags) +{ + int roffset=tjRedOffset[pf]; + int goffset=tjGreenOffset[pf]; + int boffset=tjBlueOffset[pf]; + int aoffset=alphaOffset[pf]; + int ps=tjPixelSize[pf]; + int index, row, col, retval=1; + int halfway=16*sf.num/sf.denom; + int blocksize=8*sf.num/sf.denom; + + for(row=0; row=0? buf[index*ps+aoffset]:0xFF; + if(((row/blocksize)+(col/blocksize))%2==0) + { + if(row %s Q%d ... ", pixFormatStr[pf], + (flags&TJFLAG_BOTTOMUP)? "Bottom-Up":"Top-Down ", subNameLong[subsamp], + jpegQual); + + if((srcBuf=(unsigned char *)malloc(w*h*tjPixelSize[pf]))==NULL) + _throw("Memory allocation failure"); + initBuf(srcBuf, w, h, pf, flags); + if(*dstBuf && *dstSize>0) memset(*dstBuf, 0, *dstSize); + + t=gettime(); + *dstSize=tjBufSize(w, h, subsamp); + _tj(tjCompress2(handle, srcBuf, w, 0, h, pf, dstBuf, dstSize, subsamp, + jpegQual, flags)); + t=gettime()-t; + + snprintf(tempStr, 1024, "%s_enc_%s_%s_%s_Q%d.jpg", basename, + pixFormatStr[pf], (flags&TJFLAG_BOTTOMUP)? "BU":"TD", subName[subsamp], + jpegQual); + writeJPEG(*dstBuf, *dstSize, tempStr); + printf("Done."); + printf(" %f ms\n Result in %s\n", t*1000., tempStr); + + bailout: + if(srcBuf) free(srcBuf); +} + + +void _decompTest(tjhandle handle, unsigned char *jpegBuf, + unsigned long jpegSize, int w, int h, int pf, char *basename, int subsamp, + int flags, tjscalingfactor sf) +{ + unsigned char *dstBuf=NULL; + int _hdrw=0, _hdrh=0, _hdrsubsamp=-1; double t; + int scaledWidth=TJSCALED(w, sf); + int scaledHeight=TJSCALED(h, sf); + unsigned long dstSize=0; + + printf("JPEG -> %s %s ", pixFormatStr[pf], + (flags&TJFLAG_BOTTOMUP)? "Bottom-Up":"Top-Down "); + if(sf.num!=1 || sf.denom!=1) + printf("%d/%d ... ", sf.num, sf.denom); + else printf("... "); + + _tj(tjDecompressHeader2(handle, jpegBuf, jpegSize, &_hdrw, &_hdrh, + &_hdrsubsamp)); + if(_hdrw!=w || _hdrh!=h || _hdrsubsamp!=subsamp) + _throw("Incorrect JPEG header"); + + dstSize=scaledWidth*scaledHeight*tjPixelSize[pf]; + if((dstBuf=(unsigned char *)malloc(dstSize))==NULL) + _throw("Memory allocation failure"); + memset(dstBuf, 0, dstSize); + + t=gettime(); + _tj(tjDecompress2(handle, jpegBuf, jpegSize, dstBuf, scaledWidth, 0, + scaledHeight, pf, flags)); + t=gettime()-t; + + if(checkBuf(dstBuf, scaledWidth, scaledHeight, pf, subsamp, sf, flags)) + printf("Passed."); + else printf("FAILED!"); + printf(" %f ms\n", t*1000.); + + bailout: + if(dstBuf) free(dstBuf); +} + + +void decompTest(tjhandle handle, unsigned char *jpegBuf, + unsigned long jpegSize, int w, int h, int pf, char *basename, int subsamp, + int flags) +{ + int i, n=0; + tjscalingfactor *sf=tjGetScalingFactors(&n), sf1={1, 1}; + if(!sf || !n) _throwtj(); + + if((subsamp==TJSAMP_444 || subsamp==TJSAMP_GRAY)) + { + for(i=0; i=TJPF_RGBX && pf<=TJPF_XRGB) + decompTest(dhandle, dstBuf, size, w, h, pf+(TJPF_RGBA-TJPF_RGBX), + basename, subsamp, flags); + } + } + + bailout: + if(chandle) tjDestroy(chandle); + if(dhandle) tjDestroy(dhandle); + + if(dstBuf) free(dstBuf); +} + + +void bufSizeTest(void) +{ + int w, h, i, subsamp; + unsigned char *srcBuf=NULL, *jpegBuf=NULL; + tjhandle handle=NULL; + unsigned long jpegSize=0; + + if((handle=tjInitCompress())==NULL) _throwtj(); + + printf("Buffer size regression test\n"); + for(subsamp=0; subsamp + +static double getfreq(void) +{ + LARGE_INTEGER freq; + if(!QueryPerformanceFrequency(&freq)) return 0.0; + return (double)freq.QuadPart; +} + +static double f=-1.0; + +double gettime(void) +{ + LARGE_INTEGER t; + if(f<0.0) f=getfreq(); + if(f==0.0) return (double)GetTickCount()/1000.; + else + { + QueryPerformanceCounter(&t); + return (double)t.QuadPart/f; + } +} + +#else + +#include +#include + +double gettime(void) +{ + struct timeval tv; + if(gettimeofday(&tv, NULL)<0) return 0.0; + else return (double)tv.tv_sec+((double)tv.tv_usec/1000000.); +} + +#endif diff --git a/jni/vnc/LibVNCServer-0.9.9/test/tjutil.h b/jni/vnc/LibVNCServer-0.9.9/test/tjutil.h new file mode 100644 index 0000000..bdad348 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/test/tjutil.h @@ -0,0 +1,47 @@ +/* + * Copyright (C)2011 D. R. Commander. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * - Neither the name of the libjpeg-turbo Project nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS", + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifdef _WIN32 + #ifndef __MINGW32__ + #include + #define snprintf(str, n, format, ...) \ + _snprintf_s(str, n, _TRUNCATE, format, __VA_ARGS__) + #endif + #define strcasecmp stricmp + #define strncasecmp strnicmp +#endif + +#ifndef min + #define min(a,b) ((a)<(b)?(a):(b)) +#endif + +#ifndef max + #define max(a,b) ((a)>(b)?(a):(b)) +#endif + +extern double gettime(void); diff --git a/jni/vnc/LibVNCServer-0.9.9/vncterm/ChangeLog b/jni/vnc/LibVNCServer-0.9.9/vncterm/ChangeLog new file mode 100644 index 0000000..53a9c37 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/vncterm/ChangeLog @@ -0,0 +1,15 @@ +included in LibVNCServer package, autoconf'ed it +SetXCutText implemented +fix for cargs +attributes work. +cursor in LinuxVNC is shown. +paste works +selection works (no cursor trails) +LinuxVNC gets it's dimensions via ioctl TIOCGWINSZ +First working key injection in LinuxVNC! +Added Mouse marking +added screenBuffer (so you have ASCII screen also) +fixed CopyRect for scrolling (need to propagate to libvncserver) +made VNCommand work (no prompt for bash, but else seems ok) +added flag for VNCommand to send input only after a newline + (good for interactive bash) diff --git a/jni/vnc/LibVNCServer-0.9.9/vncterm/LinuxVNC.c b/jni/vnc/LibVNCServer-0.9.9/vncterm/LinuxVNC.c new file mode 100644 index 0000000..9b58954 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/vncterm/LinuxVNC.c @@ -0,0 +1,191 @@ +#include +#include "VNConsole.h" +#include "vga.h" +#include +#include + +static int tty=2; +static int tty_inject_device; + +void do_key(rfbBool down,rfbKeySym keySym,rfbClientPtr cl) +{ + static char isControl=0; + + if(down) { + /* if(keySym==XK_Escape) + rfbCloseClient(cl); + else */ if(keySym==XK_Control_L || keySym==XK_Control_R) + isControl++; + else if(tty_inject_device>=0) { + if(keySym==XK_Escape) + keySym=27; + if(isControl) { + if(keySym>='a' && keySym<='z') + keySym-='a'-1; + else if(keySym>='A' && keySym<='Z') + keySym-='A'-1; + else + keySym=0xffff; + } + + if(keySym==XK_Tab) + keySym='\t'; + else if(keySym==XK_Return) + keySym='\r'; + else if(keySym==XK_BackSpace) + keySym=8; + else if(keySym==XK_Home || keySym==XK_KP_Home) + keySym=1; + else if(keySym==XK_End || keySym==XK_KP_End) + keySym=5; + else if(keySym==XK_Up || keySym==XK_KP_Up) + keySym=16; + else if(keySym==XK_Down || keySym==XK_KP_Down) + keySym=14; + else if(keySym==XK_Right || keySym==XK_KP_Right) + keySym=6; + else if(keySym==XK_Left || keySym==XK_KP_Left) + keySym=2; + + if(keySym<0x100) { + int ret; + ret=ioctl(tty_inject_device,TIOCSTI,&keySym); + if(ret<0) { + static char device[64]; + close(tty_inject_device); + sprintf(device,"/dev/tty%d",tty); + tty_inject_device=open(device,O_WRONLY); + ret=ioctl(tty_inject_device,TIOCSTI,&keySym); + if(ret<0) + rfbErr("Couldn't reopen device %s!\n",device); + } + } + } + } else if(keySym==XK_Control_L || keySym==XK_Control_R) + if(isControl>0) + isControl--; +} + +/* these colours are from linux kernel drivers/char/console.c */ +unsigned char color_table[] = { 0, 4, 2, 6, 1, 5, 3, 7, + 8,12,10,14, 9,13,11,15 }; +/* the default colour table, for VGA+ colour systems */ +int default_red[] = {0x00,0xaa,0x00,0xaa,0x00,0xaa,0x00,0xaa, + 0x55,0xff,0x55,0xff,0x55,0xff,0x55,0xff}; +int default_grn[] = {0x00,0x00,0xaa,0x55,0x00,0x00,0xaa,0xaa, + 0x55,0x55,0xff,0xff,0x55,0x55,0xff,0xff}; +int default_blu[] = {0x00,0x00,0x00,0x00,0xaa,0xaa,0xaa,0xaa, + 0x55,0x55,0x55,0x55,0xff,0xff,0xff,0xff}; + +int main(int argc,char **argv) +{ + int width=80,height=25; + char *buffer; + vncConsolePtr console; + char tty_device[64],title[128]; + int i; + FILE* tty_file; + struct winsize dimensions; + + if(argc>1) { + if((tty=atoi(argv[1]))<1) { + rfbErr("Usage: %s [tty_number [vnc args]]\n",argv[0]); + exit(1); + } else { + argv++; + argc--; + } + } + + /* getopt goes here! */ + + sprintf(tty_device,"/dev/tty%d",tty); + if((tty_inject_device=open(tty_device,O_WRONLY))<0) { + rfbErr("Couldn't open tty device %s!\n",tty_device); + exit(1); + } + rfbLog("Using device %s.\n",tty_device); + + if(ioctl(tty_inject_device,TIOCGWINSZ,&dimensions)>=0) { + width=dimensions.ws_col; + height=dimensions.ws_row; + } + + sprintf(title,"LinuxVNC: /dev/tty%d",tty); + + /* console init */ + if(!(console=vcGetConsole(&argc,argv,width,height,&vgaFont,TRUE))) + exit(1); + + for(i=0;i<16;i++) { + console->screen->colourMap.data.bytes[i*3+0]=default_red[color_table[i]]; + console->screen->colourMap.data.bytes[i*3+1]=default_grn[color_table[i]]; + console->screen->colourMap.data.bytes[i*3+2]=default_blu[color_table[i]]; + } + console->screen->desktopName=title; + console->screen->kbdAddEvent=do_key; + console->selectTimeOut=100000; + console->wrapBottomToTop=TRUE; +#ifdef USE_OLD_VCS + buffer=malloc(width*height); + console->cursorActive=FALSE; +#else + buffer=malloc(width*height*2+4); + console->cursorActive=TRUE; +#endif + /* memcpy(buffer,console->screenBuffer,width*height); */ + +#ifdef USE_OLD_VCS + sprintf(tty_device,"/dev/vcs%d",tty); +#else + sprintf(tty_device,"/dev/vcsa%d",tty); +#endif + + while(rfbIsActive(console->screen)) { + if(!console->currentlyMarking) { + tty_file=fopen(tty_device,"rb"); + if(!tty_file) { + rfbErr("cannot open device \"%s\"\n", + tty_device); + exit(1); + } +#ifdef USE_OLD_VCS + fread(buffer,width,height,tty_file); +#else + fread(buffer,width*height*2+4,1,tty_file); + vcHideCursor(console); +#endif + fclose(tty_file); + + for(i=0;iwidth*console->height;i++) { + if +#ifdef USE_OLD_VCS + (buffer[i]!=console->screenBuffer[i]) +#else + (buffer[4+2*i]!=console->screenBuffer[i] || + buffer[5+2*i]!=console->attributeBuffer[i]) +#endif + { + console->x=(i%console->width); + console->y=(i/console->width); + /* + rfbLog("changes: %d,%d (%d!=%d || %d!=%d)\n", + console->x,console->y, + buffer[4+2*i],console->screenBuffer[i], + buffer[5+2*i],console->attributeBuffer[i]); + */ + +#ifdef USE_OLD_VCS + vcPutChar(console,buffer[i]); +#else + vcPutCharColour(console,buffer[4+i*2],buffer[5+i*2]&0x7,buffer[5+i*2]>>4); +#endif + } + } + console->x=buffer[2]; + console->y=buffer[3]; + } + vcProcessEvents(console); + } + return(0); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/vncterm/Makefile.am b/jni/vnc/LibVNCServer-0.9.9/vncterm/Makefile.am new file mode 100644 index 0000000..db51876 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/vncterm/Makefile.am @@ -0,0 +1,27 @@ +INCLUDES = -I$(top_srcdir) + +CONSOLE_SRCS=VNConsole.c + +noinst_HEADERS=VNConsole.h vga.h + +LDADD=../libvncserver/libvncserver.la @WSOCKLIB@ + +if LINUX +if ! MINGW +if ! ANDROID +bin_PROGRAMS=linuxvnc +linuxvnc_SOURCES=LinuxVNC.c $(CONSOLE_SRCS) +endif +endif +endif + +if ! MINGW +VNCOMMAND=vncommand +endif + +noinst_PROGRAMS=example $(VNCOMMAND) +example_SOURCES=example.c $(CONSOLE_SRCS) +vncommand_SOURCES=VNCommand.c $(CONSOLE_SRCS) + + + diff --git a/jni/vnc/LibVNCServer-0.9.9/vncterm/Makefile.in b/jni/vnc/LibVNCServer-0.9.9/vncterm/Makefile.in new file mode 100644 index 0000000..6e04242 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/vncterm/Makefile.in @@ -0,0 +1,595 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@ANDROID_FALSE@@LINUX_TRUE@@MINGW_FALSE@bin_PROGRAMS = \ +@ANDROID_FALSE@@LINUX_TRUE@@MINGW_FALSE@ linuxvnc$(EXEEXT) +noinst_PROGRAMS = example$(EXEEXT) $(am__EXEEXT_1) +subdir = vncterm +DIST_COMMON = README $(noinst_HEADERS) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in ChangeLog TODO +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/rfbconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" +@MINGW_FALSE@am__EXEEXT_1 = vncommand$(EXEEXT) +PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS) +am__objects_1 = VNConsole.$(OBJEXT) +am_example_OBJECTS = example.$(OBJEXT) $(am__objects_1) +example_OBJECTS = $(am_example_OBJECTS) +example_LDADD = $(LDADD) +example_DEPENDENCIES = ../libvncserver/libvncserver.la +AM_V_lt = $(am__v_lt_$(V)) +am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) +am__v_lt_0 = --silent +am__linuxvnc_SOURCES_DIST = LinuxVNC.c VNConsole.c +@ANDROID_FALSE@@LINUX_TRUE@@MINGW_FALSE@am_linuxvnc_OBJECTS = \ +@ANDROID_FALSE@@LINUX_TRUE@@MINGW_FALSE@ LinuxVNC.$(OBJEXT) \ +@ANDROID_FALSE@@LINUX_TRUE@@MINGW_FALSE@ $(am__objects_1) +linuxvnc_OBJECTS = $(am_linuxvnc_OBJECTS) +linuxvnc_LDADD = $(LDADD) +linuxvnc_DEPENDENCIES = ../libvncserver/libvncserver.la +am_vncommand_OBJECTS = VNCommand.$(OBJEXT) $(am__objects_1) +vncommand_OBJECTS = $(am_vncommand_OBJECTS) +vncommand_LDADD = $(LDADD) +vncommand_DEPENDENCIES = ../libvncserver/libvncserver.la +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +SOURCES = $(example_SOURCES) $(linuxvnc_SOURCES) $(vncommand_SOURCES) +DIST_SOURCES = $(example_SOURCES) $(am__linuxvnc_SOURCES_DIST) \ + $(vncommand_SOURCES) +HEADERS = $(noinst_HEADERS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AVAHI_CFLAGS = @AVAHI_CFLAGS@ +AVAHI_LIBS = @AVAHI_LIBS@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CRYPT_LIBS = @CRYPT_LIBS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LDFLAGS = @JPEG_LDFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +RPMSOURCEDIR = @RPMSOURCEDIR@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSL_LIBS = @SSL_LIBS@ +STRIP = @STRIP@ +SYSTEM_LIBVNCSERVER_CFLAGS = @SYSTEM_LIBVNCSERVER_CFLAGS@ +SYSTEM_LIBVNCSERVER_LIBS = @SYSTEM_LIBVNCSERVER_LIBS@ +VERSION = @VERSION@ +WSOCKLIB = @WSOCKLIB@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_ffmpeg = @with_ffmpeg@ +INCLUDES = -I$(top_srcdir) +CONSOLE_SRCS = VNConsole.c +noinst_HEADERS = VNConsole.h vga.h +LDADD = ../libvncserver/libvncserver.la @WSOCKLIB@ +@ANDROID_FALSE@@LINUX_TRUE@@MINGW_FALSE@linuxvnc_SOURCES = LinuxVNC.c $(CONSOLE_SRCS) +@MINGW_FALSE@VNCOMMAND = vncommand +example_SOURCES = example.c $(CONSOLE_SRCS) +vncommand_SOURCES = VNCommand.c $(CONSOLE_SRCS) +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu vncterm/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu vncterm/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +example$(EXEEXT): $(example_OBJECTS) $(example_DEPENDENCIES) + @rm -f example$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(example_OBJECTS) $(example_LDADD) $(LIBS) +linuxvnc$(EXEEXT): $(linuxvnc_OBJECTS) $(linuxvnc_DEPENDENCIES) + @rm -f linuxvnc$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(linuxvnc_OBJECTS) $(linuxvnc_LDADD) $(LIBS) +vncommand$(EXEEXT): $(vncommand_OBJECTS) $(vncommand_DEPENDENCIES) + @rm -f vncommand$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(vncommand_OBJECTS) $(vncommand_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/LinuxVNC.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/VNCommand.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/VNConsole.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/example.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) $(HEADERS) +installdirs: + for dir in "$(DESTDIR)$(bindir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libtool \ + clean-noinstPROGRAMS mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ + clean-generic clean-libtool clean-noinstPROGRAMS ctags \ + distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-binPROGRAMS \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-binPROGRAMS + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jni/vnc/LibVNCServer-0.9.9/vncterm/README b/jni/vnc/LibVNCServer-0.9.9/vncterm/README new file mode 100644 index 0000000..b01e88a --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/vncterm/README @@ -0,0 +1,25 @@ + +In this stage (beta), there are two programs functional: + +LinuxVNC + monitor a virtual console (text mode) of Linux. You need + root privileges, or at least be in the "tty" group, because + it reads /dev/vcsN and writes /dev/ttyN. + It follows the same idea as WinVNC, x11vnc or OSXvnc, i.e. it + takes an existing desktop and exports it via RFB (VNC), just that + LinuxVNC exports text. + +VNCommand + executes redirecting stdin from a vncviewer and stdout & + stderr to the vnc clients. This might be renamed to vncTerm if + there are some term capabilities added (up to now, bash doesn't look + nice). Colours and other ANSI sequences need to be added. + +My original plan was to create a program named vncTerm. It was meant to +overcome incompatibilities between different TERMs, but I found "screen" to +be just such a program. Maybe once some time in the future I'll make a +patch for screen to use VNConsole to export it's contents via RFB... + +These two programs are a simple application of LibVNCServer with a small +console layer in between (VNConsole). You can use them under the terms +(not vncTerms ;-) of the GPL. They where written by Johannes E. Schindelin. diff --git a/jni/vnc/LibVNCServer-0.9.9/vncterm/TODO b/jni/vnc/LibVNCServer-0.9.9/vncterm/TODO new file mode 100644 index 0000000..5c6f189 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/vncterm/TODO @@ -0,0 +1,21 @@ +VNConsole: +LinuxVNC: +VNCommand: + make Control or Alt sequences work. + Find out how to satisfy isatty(). => /dev/ptyN + Fix check if child is alive. + Add command line option for real interactive mode. + +done: + +.treat colours correctly (use /dev/vcsaN's attributes). +.introduce per cell colours (for attributes) +.fix cursor fuckup when selecting. +.default to paste for right mouse button. +.have an idea how to insert keys +.convert VNCommand to an interactive shell (vncTerm) +.bidirectional pipes (spawn a shell ...) +.mark with mouse (copy text) +.when scrolling, cursor must be hidden! + + modifiedRegion which are copied with CopyRect have to be modified also. diff --git a/jni/vnc/LibVNCServer-0.9.9/vncterm/VNCommand.c b/jni/vnc/LibVNCServer-0.9.9/vncterm/VNCommand.c new file mode 100644 index 0000000..ecf2543 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/vncterm/VNCommand.c @@ -0,0 +1,127 @@ +#ifdef __STRICT_ANSI__ +#define _BSD_SOURCE +#define _POSIX_SOURCE +#endif +#include "VNConsole.h" +#include "vga.h" +#ifdef LIBVNCSERVER_HAVE_FCNTL_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_SYS_TIME_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_UNISTD_H +#include +#endif +#ifdef LIBVNCSERVER_HAVE_SYS_WAIT_H +#include +#endif +#include + + +int main(int argc, char **argv) +{ + rfbBool interactive=FALSE,sendOnlyWholeLines=TRUE; + int serverArgc,programArg0; + for(serverArgc=1;serverArgcdoEcho = FALSE; + + if(max_fdinputCount) { + if(sendOnlyWholeLines) { + for(i=0;iinputCount;i++) + if(console->inputBuffer[i]=='\n') { + i++; + fwrite(console->inputBuffer,i,1,input_pipe); + fflush(input_pipe); + /* fwrite(console->inputBuffer,i,1,stderr); */ + if(console->inputCount>i) + memmove(console->inputBuffer,console->inputBuffer+i,console->inputCount-i); + console->inputCount-=i; + i=0; + } + } else { + fwrite(console->inputBuffer,console->inputCount,1,input_pipe); + fflush(input_pipe); + /* fwrite(console->inputBuffer,console->inputCount,1,stderr); */ + console->inputCount=0; + } + } + /* process output */ + fs1=fs; tv1=tv; + num_fds=select(max_fd+1,&fs1,NULL,NULL,&tv1); + if(num_fds>0) { + /* + if(FD_ISSET(0,&fs1)) { + ch=getchar(); + fputc(ch,f); + } + */ + if(FD_ISSET(out[0],&fs1)) { + c=read(out[0],buffer,1024); + for(i=0;i +#include +#include "VNConsole.h" + +#define DEBUG(x) + +unsigned char colourMap16[16*3]={ + /* 0 black #000000 */ 0x00,0x00,0x00, + /* 1 maroon #800000 */ 0x80,0x00,0x00, + /* 2 green #008000 */ 0x00,0x80,0x00, + /* 3 khaki #808000 */ 0x80,0x80,0x00, + /* 4 navy #000080 */ 0x00,0x00,0x80, + /* 5 purple #800080 */ 0x80,0x00,0x80, + /* 6 aqua-green #008080 */ 0x00,0x80,0x80, + /* 7 light grey #c0c0c0 */ 0xc0,0xc0,0xc0, + /* 8 dark grey #808080 */ 0x80,0x80,0x80, + /* 9 red #ff0000 */ 0xff,0x00,0x00, + /* a light green #00ff00 */ 0x00,0xff,0x00, + /* b yellow #ffff00 */ 0xff,0xff,0x00, + /* c blue #0000ff */ 0x00,0x00,0xff, + /* d pink #ff00ff */ 0xff,0x00,0xff, + /* e light blue #00ffff */ 0x00,0xff,0xff, + /* f white #ffffff */ 0xff,0xff,0xff +}; + +void MakeColourMap16(vncConsolePtr c) +{ + rfbColourMap* colourMap=&(c->screen->colourMap); + if(colourMap->count) + free(colourMap->data.bytes); + colourMap->data.bytes=malloc(16*3); + memcpy(colourMap->data.bytes,colourMap16,16*3); + colourMap->count=16; + colourMap->is16=FALSE; + c->screen->serverFormat.trueColour=FALSE; +} + +void vcDrawOrHideCursor(vncConsolePtr c) +{ + int i,j,w=c->screen->paddedWidthInBytes; + char *b=c->screen->frameBuffer+c->y*c->cHeight*w+c->x*c->cWidth; + for(j=c->cy1;jcy2;j++) + for(i=c->cx1;icx2;i++) + b[j*w+i]^=0x0f; + rfbMarkRectAsModified(c->screen, + c->x*c->cWidth+c->cx1,c->y*c->cHeight+c->cy1, + c->x*c->cWidth+c->cx2,c->y*c->cHeight+c->cy2); + c->cursorIsDrawn=c->cursorIsDrawn?FALSE:TRUE; +} + +void vcDrawCursor(vncConsolePtr c) +{ + if(c->cursorActive && c->yheight && c->xwidth) { + /* rfbLog("DrawCursor: %d,%d\n",c->x,c->y); */ + vcDrawOrHideCursor(c); + } +} + +void vcHideCursor(vncConsolePtr c) +{ + if(c->currentlyMarking) + vcUnmark(c); + vcDrawOrHideCursor(c); +} + +void vcMakeSureCursorIsDrawn(rfbClientPtr cl) +{ + vncConsolePtr c=(vncConsolePtr)cl->screen->screenData; + if(!c->dontDrawCursor) + vcDrawCursor(c); +} + +vncConsolePtr vcGetConsole(int *argc,char **argv, + int width,int height,rfbFontDataPtr font +#ifdef USE_ATTRIBUTE_BUFFER + ,rfbBool withAttributes +#endif + ) +{ + vncConsolePtr c=(vncConsolePtr)malloc(sizeof(vncConsole)); + + c->font=font; + c->width=width; + c->height=height; + c->screenBuffer=(char*)malloc(width*height); + memset(c->screenBuffer,' ',width*height); +#ifdef USE_ATTRIBUTE_BUFFER + if(withAttributes) { + c->attributeBuffer=(char*)malloc(width*height); + memset(c->attributeBuffer,0x07,width*height); + } else + c->attributeBuffer=NULL; +#endif + c->x=0; + c->y=0; + c->wrapBottomToTop=FALSE; + c->cursorActive=TRUE; + c->cursorIsDrawn=FALSE; + c->dontDrawCursor=FALSE; + c->inputBuffer=(char*)malloc(1024); + c->inputSize=1024; + c->inputCount=0; + c->selection=0; + c->selectTimeOut=40000; /* 40 ms */ + c->doEcho=TRUE; + + c->wasRightButtonDown=FALSE; + c->currentlyMarking=FALSE; + + rfbWholeFontBBox(font,&c->xhot,&c->cHeight,&c->cWidth,&c->yhot); + c->cWidth-=c->xhot; + c->cHeight=-c->cHeight-c->yhot; + + /* text cursor */ + c->cx1=c->cWidth/8; + c->cx2=c->cWidth*7/8; + c->cy2=c->cHeight-1-c->yhot+c->cHeight/16; + if(c->cy2>=c->cHeight) + c->cy2=c->cHeight-1; + c->cy1=c->cy2-c->cHeight/8; + if(c->cy1<0) + c->cy2=0; + + if(!(c->screen = rfbGetScreen(argc,argv,c->cWidth*c->width,c->cHeight*c->height,8,1,1))) + return NULL; + c->screen->screenData=(void*)c; + c->screen->displayHook=vcMakeSureCursorIsDrawn; + c->screen->frameBuffer= + (char*)malloc(c->screen->width*c->screen->height); + memset(c->screen->frameBuffer,c->backColour, + c->screen->width*c->screen->height); + c->screen->kbdAddEvent=vcKbdAddEventProc; + c->screen->ptrAddEvent=vcPtrAddEventProc; + c->screen->setXCutText=vcSetXCutTextProc; + + MakeColourMap16(c); + c->foreColour=0x7; + c->backColour=0; + + rfbInitServer(c->screen); + + return(c); +} + +#include + +/* before using this function, hide the cursor */ +void vcScroll(vncConsolePtr c,int lineCount) +{ + int y1,y2; + rfbScreenInfoPtr s=c->screen; + + if(lineCount==0) + return; + + /* rfbLog("begin scroll\n"); */ + vcHideCursor(c); + c->dontDrawCursor=TRUE; + + if(lineCount>=c->height || lineCount<=-c->height) { + y1=0; y2=s->height; + } else if(lineCount>0) { + y1=s->height-lineCount*c->cHeight; y2=s->height; + rfbDoCopyRect(s,0,0,s->width,y1,0,-lineCount*c->cHeight); + memmove(c->screenBuffer, + c->screenBuffer+(c->height-lineCount)*c->width, + (c->height-lineCount)*c->width); +#ifdef USE_ATTRIBUTE_BUFFER + if(c->attributeBuffer) + memmove(c->attributeBuffer, + c->attributeBuffer+(c->height-lineCount)*c->width, + (c->height-lineCount)*c->width); +#endif + } else { + y1=0; y2=-lineCount*c->cHeight; + rfbDoCopyRect(s,0,y2,s->width,s->height,0,-lineCount*c->cHeight); + memmove(c->screenBuffer-lineCount*c->width, + c->screenBuffer, + (c->height+lineCount)*c->width); +#ifdef USE_ATTRIBUTE_BUFFER + if(c->attributeBuffer) + memmove(c->attributeBuffer-lineCount*c->width, + c->attributeBuffer, + (c->height+lineCount)*c->width); +#endif + } + + c->dontDrawCursor=FALSE; + memset(s->frameBuffer+y1*s->width,c->backColour,(y2-y1)*s->width); + rfbMarkRectAsModified(s,0,y1-c->cHeight,s->width,y2); + memset(c->screenBuffer+y1/c->cHeight*c->width,' ', + (y2-y1)/c->cHeight*c->width); +#ifdef USE_ATTRIBUTE_BUFFER + if(c->attributeBuffer) + memset(c->attributeBuffer+y1/c->cHeight*c->width,0x07, + (y2-y1)/c->cHeight*c->width); +#endif + /* rfbLog("end scroll\n"); */ +} + +void vcCheckCoordinates(vncConsolePtr c) +{ + if(c->x>=c->width) { + c->x=0; + c->y++; + } + if(c->y>=c->height) { + if(c->wrapBottomToTop) + c->y=0; + else { + vcScroll(c,c->y+1-c->height); + c->y=c->height-1; + } + } +} + +void vcPutChar(vncConsolePtr c,unsigned char ch) +{ +#ifdef USE_ATTRIBUTE_BUFFER + if(c->attributeBuffer) { + unsigned char colour=c->attributeBuffer[c->x+c->y*c->width]; + vcPutCharColour(c,ch,colour&0x7,colour>>4); + } else +#endif + vcPutCharColour(c,ch,c->foreColour,c->backColour); +} + +void vcPutCharColour(vncConsolePtr c,unsigned char ch,unsigned char foreColour,unsigned char backColour) +{ + rfbScreenInfoPtr s=c->screen; + int j,x,y; + + vcHideCursor(c); + if(ch<' ') { + switch(ch) { + case 7: + case 13: + break; + case 8: /* BackSpace */ + if(c->x>0) { + c->x--; + vcPutChar(c,' '); + c->x--; + } + break; + case 10: /* return */ + c->x=0; + c->y++; + vcCheckCoordinates(c); + break; + case 9: /* tabulator */ + do { + vcPutChar(c,' '); + } while(c->x%8); + break; + default: + rfbLog("putchar of unknown character: %c(%d).\n",ch,ch); + vcPutChar(c,' '); + } + } else { +#ifdef USE_ATTRIBUTE_BUFFER + if(c->attributeBuffer) + c->attributeBuffer[c->x+c->y*c->width]=foreColour|(backColour<<4); +#endif + x=c->x*c->cWidth; + y=c->y*c->cHeight; + for(j=y+c->cHeight-1;j>=y;j--) + memset(s->frameBuffer+j*s->width+x,backColour,c->cWidth); + rfbDrawChar(s,c->font, + x-c->xhot+(c->cWidth-rfbWidthOfChar(c->font,ch))/2, + y+c->cHeight-c->yhot-1, + ch,foreColour); + c->screenBuffer[c->y*c->width+c->x]=ch; + c->x++; + rfbMarkRectAsModified(s,x,y-c->cHeight+1,x+c->cWidth,y+c->cHeight+1); + vcCheckCoordinates(c); + } +} + +void vcPrint(vncConsolePtr c,unsigned char* str) +{ + while(*str) { + vcPutChar(c,*str); + str++; + } +} + +void vcPrintColour(vncConsolePtr c,unsigned char* str,unsigned char foreColour,unsigned char backColour) +{ + while(*str) { + vcPutCharColour(c,*str,foreColour,backColour); + str++; + } +} + +void vcPrintF(vncConsolePtr c,char* format,...) +{ + va_list args; + char buf[4096]; + va_start(args, format); + vsprintf(buf, format, args); + vcPrint(c,(unsigned char*)buf); + va_end(args); +} + +void vcPrintFColour(vncConsolePtr c,unsigned char foreColour,unsigned char backColour,char* format,...) +{ + va_list args; + char buf[4096]; + va_start(args, format); + vsprintf(buf, format, args); + vcPrintColour(c,(unsigned char*)buf,foreColour,backColour); + va_end(args); +} + +char vcGetCh(vncConsolePtr c) +{ + if(c->inputCount>0) { + char ch; + ch=c->inputBuffer[0]; + c->inputCount--; + if(c->inputCount>0) + memmove(c->inputBuffer,c->inputBuffer+1,c->inputCount); + return(ch); + } else + return(0); +} + +char vcGetChar(vncConsolePtr c) +{ + while(rfbIsActive(c->screen) && c->inputCount==0) + vcProcessEvents(c); + return(vcGetCh(c)); +} + +char *vcGetString(vncConsolePtr c,char *buffer,int bufferSize) +{ + char *bufferBackup=c->inputBuffer; + int i,count=bufferSize-1; + + if(count>c->inputCount) + count=c->inputCount; + for(i=1;iinputCount-=i; + memmove(bufferBackup,bufferBackup+i+2,c->inputCount); + return(buffer); + } + memcpy(buffer,bufferBackup,c->inputCount); + count=c->inputSize; + c->inputSize=bufferSize; + c->inputBuffer=buffer; + while(rfbIsActive(c->screen) + && c->inputCountinputCount-1]!='\n') + vcProcessEvents(c); + buffer[c->inputCount]=0; + c->inputBuffer=bufferBackup; + c->inputSize=count; + c->inputCount=0; + return(buffer); +} + +void vcKbdAddEventProc(rfbBool down,rfbKeySym keySym,rfbClientPtr cl) +{ + vncConsolePtr c=(vncConsolePtr)cl->screen->screenData; + if(down) { + if(c->inputCountinputSize) { + if(keySym<0 || keySym>0xff) { + if(keySym==XK_Return) keySym='\n'; + else if(keySym==XK_BackSpace) keySym=8; + else if(keySym==XK_Tab) keySym=9; + else keySym=0; + } + if(keySym>0) { + if(keySym==8) { + if(c->inputCount>0) + c->inputCount--; + } else + c->inputBuffer[c->inputCount++]=(char)keySym; + if(c->doEcho) + vcPutChar(c,(unsigned char)keySym); + } + } + } +} + +void vcPtrAddEventProc(int buttonMask,int x,int y,rfbClientPtr cl) +{ + vncConsolePtr c=(vncConsolePtr)cl->screen->screenData; + + if(c->wasRightButtonDown) { + if((buttonMask&4)==0) { + if(c->selection) { + char* s; + for(s=c->selection;*s;s++) { + c->screen->kbdAddEvent(1,*s,cl); + c->screen->kbdAddEvent(0,*s,cl); + } + } + c->wasRightButtonDown=0; + } + } else if(buttonMask&4) + c->wasRightButtonDown=1; + + if(buttonMask&1) { + int cx=x/c->cWidth,cy=y/c->cHeight,pos; + if(cx<0) cx=0; else if(cx>=c->width) cx=c->width-1; + if(cy<0) cy=0; else if(cy>=c->height) cy=c->height-1; + pos=cy*c->width+cx; + + /* mark */ + if(!c->currentlyMarking) { + c->currentlyMarking=TRUE; + c->markStart=pos; + c->markEnd=pos; + vcToggleMarkCell(c,pos); + } else { + DEBUG(rfbLog("markStart: %d, markEnd: %d, pos: %d\n", + c->markStart,c->markEnd,pos)); + if(c->markEnd!=pos) { + if(c->markEndmarkEnd; cy=pos; + } else { + cx=pos; cy=c->markEnd; + } + if(cxmarkStart) { + if(cymarkStart) + cy--; + } else + cx++; + while(cx<=cy) { + vcToggleMarkCell(c,cx); + cx++; + } + c->markEnd=pos; + } + } + } else if(c->currentlyMarking) { + int i,j; + if(c->markStartmarkEnd) { + i=c->markStart; j=c->markEnd+1; + } else { + i=c->markEnd; j=c->markStart; + } + if(c->selection) free(c->selection); + c->selection=(char*)malloc(j-i+1); + memcpy(c->selection,c->screenBuffer+i,j-i); + c->selection[j-i]=0; + vcUnmark(c); + rfbGotXCutText(c->screen,c->selection,j-i); + } + rfbDefaultPtrAddEvent(buttonMask,x,y,cl); +} + +void vcSetXCutTextProc(char* str,int len, struct _rfbClientRec* cl) +{ + vncConsolePtr c=(vncConsolePtr)cl->screen->screenData; + + if(c->selection) free(c->selection); + c->selection=(char*)malloc(len+1); + memcpy(c->selection,str,len); + c->selection[len]=0; +} + +void vcToggleMarkCell(vncConsolePtr c,int pos) +{ + int x=(pos%c->width)*c->cWidth, + y=(pos/c->width)*c->cHeight; + int i,j; + rfbScreenInfoPtr s=c->screen; + char *b=s->frameBuffer+y*s->width+x; + for(j=0;jcHeight;j++) + for(i=0;icWidth;i++) + b[j*s->width+i]^=0x0f; + rfbMarkRectAsModified(c->screen,x,y,x+c->cWidth,y+c->cHeight); +} + +void vcUnmark(vncConsolePtr c) +{ + int i,j; + c->currentlyMarking=FALSE; + if(c->markStartmarkEnd) { + i=c->markStart; j=c->markEnd+1; + } else { + i=c->markEnd; j=c->markStart; + } + for(;iscreen,c->selectTimeOut); +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/vncterm/VNConsole.h b/jni/vnc/LibVNCServer-0.9.9/vncterm/VNConsole.h new file mode 100644 index 0000000..ae6822d --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/vncterm/VNConsole.h @@ -0,0 +1,95 @@ +#include + +/* this is now the default */ +#define USE_ATTRIBUTE_BUFFER + +typedef struct vncConsole { + /* width and height in cells (=characters) */ + int width, height; + + /* current position */ + int x,y; + + /* characters */ + char *screenBuffer; + +#ifdef USE_ATTRIBUTE_BUFFER + /* attributes: colours. If NULL, default to gray on black, else + for each cell an unsigned char holds foreColour|(backColour<<4) */ + char *attributeBuffer; +#endif + + /* if this is set, the screen doesn't scroll. */ + rfbBool wrapBottomToTop; + + /* height and width of one character */ + int cWidth, cHeight; + /* offset of characters */ + int xhot,yhot; + + /* colour */ + unsigned char foreColour,backColour; + int8_t cx1,cy1,cx2,cy2; + + /* input buffer */ + char *inputBuffer; + int inputCount; + int inputSize; + long selectTimeOut; + rfbBool doEcho; /* if reading input, do output directly? */ + + /* selection */ + char *selection; + + /* mouse */ + rfbBool wasRightButtonDown; + rfbBool currentlyMarking; + int markStart,markEnd; + + /* should text cursor be drawn? (an underscore at current position) */ + rfbBool cursorActive; + rfbBool cursorIsDrawn; + rfbBool dontDrawCursor; /* for example, while scrolling */ + + rfbFontDataPtr font; + rfbScreenInfoPtr screen; +} vncConsole, *vncConsolePtr; + +#ifdef USE_ATTRIBUTE_BUFFER +vncConsolePtr vcGetConsole(int *argc,char **argv, + int width,int height,rfbFontDataPtr font, + rfbBool withAttributes); +#else +vncConsolePtr vcGetConsole(int argc,char **argv, + int width,int height,rfbFontDataPtr font); +#endif +void vcDrawCursor(vncConsolePtr c); +void vcHideCursor(vncConsolePtr c); +void vcCheckCoordinates(vncConsolePtr c); + +void vcPutChar(vncConsolePtr c,unsigned char ch); +void vcPrint(vncConsolePtr c,unsigned char* str); +void vcPrintF(vncConsolePtr c,char* format,...); + +void vcPutCharColour(vncConsolePtr c,unsigned char ch, + unsigned char foreColour,unsigned char backColour); +void vcPrintColour(vncConsolePtr c,unsigned char* str, + unsigned char foreColour,unsigned char backColour); +void vcPrintFColour(vncConsolePtr c,unsigned char foreColour, + unsigned char backColour,char* format,...); + +char vcGetCh(vncConsolePtr c); +char vcGetChar(vncConsolePtr c); /* blocking */ +char *vcGetString(vncConsolePtr c,char *buffer,int maxLen); + +void vcKbdAddEventProc(rfbBool down,rfbKeySym keySym,rfbClientPtr cl); +void vcPtrAddEventProc(int buttonMask,int x,int y,rfbClientPtr cl); +void vcSetXCutTextProc(char* str,int len, struct _rfbClientRec* cl); + +void vcToggleMarkCell(vncConsolePtr c,int pos); +void vcUnmark(vncConsolePtr c); + +void vcProcessEvents(vncConsolePtr c); + +/* before using this function, hide the cursor */ +void vcScroll(vncConsolePtr c,int lineCount); diff --git a/jni/vnc/LibVNCServer-0.9.9/vncterm/example.c b/jni/vnc/LibVNCServer-0.9.9/vncterm/example.c new file mode 100644 index 0000000..54de666 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/vncterm/example.c @@ -0,0 +1,31 @@ +#include "VNConsole.h" +#include "vga.h" + +int main(int argc,char **argv) +{ + vncConsolePtr c=vcGetConsole(&argc,argv,80,25,&vgaFont,FALSE); + char buffer[1024]; + int i,j,l; + for(j=32;j<256;j+=16) { + vcPrintF(c,"%02x: ",j); + for(i=j;i ",i); + vcGetString(c,buffer,1024); + l=strlen(buffer)-1; + while(l>=0 && buffer[l]=='\n') + buffer[l]=0; + if(!strcmp(buffer,"quit")) + return(0); + if(!strcmp(buffer,"s")) + vcScroll(c,2); + if(!strcmp(buffer,"S")) + vcScroll(c,-2); + i++; + } + return(0); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/vncterm/vga.h b/jni/vnc/LibVNCServer-0.9.9/vncterm/vga.h new file mode 100644 index 0000000..21e03eb --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/vncterm/vga.h @@ -0,0 +1,261 @@ +unsigned char vgaFontData[2399]={ +0x7c,0xc6,0xc6,0xde,0xde,0xde,0xdc,0xc0,0x7c, /* 0 */ +0x7e,0x81,0xa5,0x81,0x81,0xa5,0x99,0x81,0x81,0x7e, /* 1 */ +0x7e,0xff,0xdb,0xff,0xff,0xdb,0xe7,0xff,0xff,0x7e, /* 2 */ +0x6c,0xfe,0xfe,0xfe,0xfe,0x7c,0x38,0x10, /* 3 */ +0x10,0x38,0x7c,0xfe,0x7c,0x38,0x10, /* 4 */ +0x18,0x3c,0x3c,0xe7,0xe7,0xe7,0x18,0x18,0x3c, /* 5 */ +0x18,0x3c,0x7e,0xff,0xff,0x7e,0x18,0x18,0x3c, /* 6 */ +0x60,0xf0,0xf0,0x60, /* 7 */ +0xff,0xff,0xff,0xff,0xff,0xff,0xe7,0xc3,0xc3,0xe7,0xff,0xff,0xff,0xff,0xff,0xff, /* 8 */ +0x78,0xcc,0x84,0x84,0xcc,0x78, /* 9 */ +0xff,0xff,0xff,0xff,0xff,0xc3,0x99,0xbd,0xbd,0x99,0xc3,0xff,0xff,0xff,0xff,0xff, /* 10 */ +0x1e,0x06,0x0e,0x1a,0x78,0xcc,0xcc,0xcc,0xcc,0x78, /* 11 */ +0x78,0xcc,0xcc,0xcc,0xcc,0x78,0x30,0xfc,0x30,0x30, /* 12 */ +0x3f,0x33,0x3f,0x30,0x30,0x30,0x30,0x70,0xf0,0xe0, /* 13 */ +0x7f,0x63,0x7f,0x63,0x63,0x63,0x63,0x67,0xe7,0xe6,0xc0, /* 14 */ +0x18,0x18,0xdb,0x3c,0xe7,0x3c,0xdb,0x18,0x18, /* 15 */ +0x80,0xc0,0xe0,0xf0,0xf8,0xfe,0xf8,0xf0,0xe0,0xc0,0x80, /* 16 */ +0x02,0x06,0x0e,0x1e,0x3e,0xfe,0x3e,0x1e,0x0e,0x06,0x02, /* 17 */ +0x30,0x78,0xfc,0x30,0x30,0x30,0xfc,0x78,0x30, /* 18 */ +0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0x00,0xcc,0xcc, /* 19 */ +0x7f,0xdb,0xdb,0xdb,0x7b,0x1b,0x1b,0x1b,0x1b,0x1b, /* 20 */ +0x7c,0xc6,0x60,0x38,0x6c,0xc6,0xc6,0x6c,0x38,0x0c,0xc6,0x7c, /* 21 */ +0xfe,0xfe,0xfe,0xfe, /* 22 */ +0x30,0x78,0xfc,0x30,0x30,0x30,0xfc,0x78,0x30,0xfc, /* 23 */ +0x30,0x78,0xfc,0x30,0x30,0x30,0x30,0x30,0x30,0x30, /* 24 */ +0x30,0x30,0x30,0x30,0x30,0x30,0x30,0xfc,0x78,0x30, /* 25 */ +0x18,0x0c,0xfe,0x0c,0x18, /* 26 */ +0x30,0x60,0xfe,0x60,0x30, /* 27 */ +0xc0,0xc0,0xc0,0xfe, /* 28 */ +0x28,0x6c,0xfe,0x6c,0x28, /* 29 */ +0x10,0x38,0x38,0x7c,0x7c,0xfe,0xfe, /* 30 */ +0xfe,0xfe,0x7c,0x7c,0x38,0x38,0x10, /* 31 */ + /* 32 */ +0x60,0xf0,0xf0,0xf0,0x60,0x60,0x60,0x00,0x60,0x60, /* 33 */ +0xcc,0xcc,0xcc,0x48, /* 34 */ +0x6c,0x6c,0xfe,0x6c,0x6c,0x6c,0xfe,0x6c,0x6c, /* 35 */ +0x18,0x18,0x7c,0xc6,0xc2,0xc0,0x7c,0x06,0x06,0x86,0xc6,0x7c,0x18,0x18, /* 36 */ +0xc2,0xc6,0x0c,0x18,0x30,0x60,0xc6,0x86, /* 37 */ +0x38,0x6c,0x6c,0x38,0x76,0xdc,0xcc,0xcc,0xcc,0x76, /* 38 */ +0x60,0x60,0x60,0xc0, /* 39 */ +0x30,0x60,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0x60,0x30, /* 40 */ +0xc0,0x60,0x30,0x30,0x30,0x30,0x30,0x30,0x60,0xc0, /* 41 */ +0x66,0x3c,0xff,0x3c,0x66, /* 42 */ +0x30,0x30,0xfc,0x30,0x30, /* 43 */ +0x60,0x60,0x60,0xc0, /* 44 */ +0xfe, /* 45 */ +0xc0,0xc0, /* 46 */ +0x02,0x06,0x0c,0x18,0x30,0x60,0xc0,0x80, /* 47 */ +0x38,0x6c,0xc6,0xc6,0xd6,0xd6,0xc6,0xc6,0x6c,0x38, /* 48 */ +0x30,0x70,0xf0,0x30,0x30,0x30,0x30,0x30,0x30,0xfc, /* 49 */ +0x7c,0xc6,0x06,0x0c,0x18,0x30,0x60,0xc0,0xc6,0xfe, /* 50 */ +0x7c,0xc6,0x06,0x06,0x3c,0x06,0x06,0x06,0xc6,0x7c, /* 51 */ +0x0c,0x1c,0x3c,0x6c,0xcc,0xfe,0x0c,0x0c,0x0c,0x1e, /* 52 */ +0xfe,0xc0,0xc0,0xc0,0xfc,0x06,0x06,0x06,0xc6,0x7c, /* 53 */ +0x38,0x60,0xc0,0xc0,0xfc,0xc6,0xc6,0xc6,0xc6,0x7c, /* 54 */ +0xfe,0xc6,0x06,0x06,0x0c,0x18,0x30,0x30,0x30,0x30, /* 55 */ +0x7c,0xc6,0xc6,0xc6,0x7c,0xc6,0xc6,0xc6,0xc6,0x7c, /* 56 */ +0x7c,0xc6,0xc6,0xc6,0x7e,0x06,0x06,0x06,0x0c,0x78, /* 57 */ +0xc0,0xc0,0x00,0x00,0x00,0xc0,0xc0, /* 58 */ +0x60,0x60,0x00,0x00,0x00,0x60,0x60,0xc0, /* 59 */ +0x0c,0x18,0x30,0x60,0xc0,0x60,0x30,0x18,0x0c, /* 60 */ +0xfc,0x00,0x00,0xfc, /* 61 */ +0xc0,0x60,0x30,0x18,0x0c,0x18,0x30,0x60,0xc0, /* 62 */ +0x7c,0xc6,0xc6,0x0c,0x18,0x18,0x18,0x00,0x18,0x18, /* 63 */ +0x7c,0xc6,0xc6,0xde,0xde,0xde,0xdc,0xc0,0x7c, /* 64 */ +0x10,0x38,0x6c,0xc6,0xc6,0xfe,0xc6,0xc6,0xc6,0xc6, /* 65 */ +0xfc,0x66,0x66,0x66,0x7c,0x66,0x66,0x66,0x66,0xfc, /* 66 */ +0x3c,0x66,0xc2,0xc0,0xc0,0xc0,0xc0,0xc2,0x66,0x3c, /* 67 */ +0xf8,0x6c,0x66,0x66,0x66,0x66,0x66,0x66,0x6c,0xf8, /* 68 */ +0xfe,0x66,0x62,0x68,0x78,0x68,0x60,0x62,0x66,0xfe, /* 69 */ +0xfe,0x66,0x62,0x68,0x78,0x68,0x60,0x60,0x60,0xf0, /* 70 */ +0x3c,0x66,0xc2,0xc0,0xc0,0xde,0xc6,0xc6,0x66,0x3a, /* 71 */ +0xc6,0xc6,0xc6,0xc6,0xfe,0xc6,0xc6,0xc6,0xc6,0xc6, /* 72 */ +0xf0,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0xf0, /* 73 */ +0x1e,0x0c,0x0c,0x0c,0x0c,0x0c,0xcc,0xcc,0xcc,0x78, /* 74 */ +0xe6,0x66,0x66,0x6c,0x78,0x78,0x6c,0x66,0x66,0xe6, /* 75 */ +0xf0,0x60,0x60,0x60,0x60,0x60,0x60,0x62,0x66,0xfe, /* 76 */ +0xc6,0xee,0xfe,0xfe,0xd6,0xc6,0xc6,0xc6,0xc6,0xc6, /* 77 */ +0xc6,0xe6,0xf6,0xfe,0xde,0xce,0xc6,0xc6,0xc6,0xc6, /* 78 */ +0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c, /* 79 */ +0xfc,0x66,0x66,0x66,0x7c,0x60,0x60,0x60,0x60,0xf0, /* 80 */ +0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xd6,0xde,0x7c,0x0c,0x0e, /* 81 */ +0xfc,0x66,0x66,0x66,0x7c,0x6c,0x66,0x66,0x66,0xe6, /* 82 */ +0x7c,0xc6,0xc6,0x60,0x38,0x0c,0x06,0xc6,0xc6,0x7c, /* 83 */ +0xfc,0xfc,0xb4,0x30,0x30,0x30,0x30,0x30,0x30,0x78, /* 84 */ +0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c, /* 85 */ +0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x6c,0x38,0x10, /* 86 */ +0xc6,0xc6,0xc6,0xc6,0xd6,0xd6,0xd6,0xfe,0xee,0x6c, /* 87 */ +0xc6,0xc6,0x6c,0x7c,0x38,0x38,0x7c,0x6c,0xc6,0xc6, /* 88 */ +0xcc,0xcc,0xcc,0xcc,0x78,0x30,0x30,0x30,0x30,0x78, /* 89 */ +0xfe,0xc6,0x86,0x0c,0x18,0x30,0x60,0xc2,0xc6,0xfe, /* 90 */ +0xf0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xf0, /* 91 */ +0x80,0xc0,0xe0,0x70,0x38,0x1c,0x0e,0x06,0x02, /* 92 */ +0xf0,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0xf0, /* 93 */ +0x10,0x38,0x6c,0xc6, /* 94 */ +0xff, /* 95 */ +0xc0,0xc0,0x60, /* 96 */ +0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76, /* 97 */ +0xe0,0x60,0x60,0x78,0x6c,0x66,0x66,0x66,0x66,0x7c, /* 98 */ +0x7c,0xc6,0xc0,0xc0,0xc0,0xc6,0x7c, /* 99 */ +0x1c,0x0c,0x0c,0x3c,0x6c,0xcc,0xcc,0xcc,0xcc,0x76, /* 100 */ +0x7c,0xc6,0xfe,0xc0,0xc0,0xc6,0x7c, /* 101 */ +0x38,0x6c,0x64,0x60,0xf0,0x60,0x60,0x60,0x60,0xf0, /* 102 */ +0x76,0xcc,0xcc,0xcc,0xcc,0xcc,0x7c,0x0c,0xcc,0x78, /* 103 */ +0xe0,0x60,0x60,0x6c,0x76,0x66,0x66,0x66,0x66,0xe6, /* 104 */ +0x60,0x60,0x00,0xe0,0x60,0x60,0x60,0x60,0x60,0xf0, /* 105 */ +0x0c,0x0c,0x00,0x1c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0xcc,0xcc,0x78, /* 106 */ +0xe0,0x60,0x60,0x66,0x6c,0x78,0x78,0x6c,0x66,0xe6, /* 107 */ +0xe0,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0xf0, /* 108 */ +0xec,0xfe,0xd6,0xd6,0xd6,0xd6,0xc6, /* 109 */ +0xdc,0x66,0x66,0x66,0x66,0x66,0x66, /* 110 */ +0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c, /* 111 */ +0xdc,0x66,0x66,0x66,0x66,0x66,0x7c,0x60,0x60,0xf0, /* 112 */ +0x76,0xcc,0xcc,0xcc,0xcc,0xcc,0x7c,0x0c,0x0c,0x1e, /* 113 */ +0xdc,0x76,0x66,0x60,0x60,0x60,0xf0, /* 114 */ +0x7c,0xc6,0x60,0x38,0x0c,0xc6,0x7c, /* 115 */ +0x10,0x30,0x30,0xfc,0x30,0x30,0x30,0x30,0x36,0x1c, /* 116 */ +0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0x76, /* 117 */ +0xcc,0xcc,0xcc,0xcc,0xcc,0x78,0x30, /* 118 */ +0xc6,0xc6,0xd6,0xd6,0xd6,0xfe,0x6c, /* 119 */ +0xc6,0x6c,0x38,0x38,0x38,0x6c,0xc6, /* 120 */ +0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7e,0x06,0x0c,0xf8, /* 121 */ +0xfe,0xcc,0x18,0x30,0x60,0xc6,0xfe, /* 122 */ +0x1c,0x30,0x30,0x30,0xe0,0x30,0x30,0x30,0x30,0x1c, /* 123 */ +0xc0,0xc0,0xc0,0xc0,0x00,0xc0,0xc0,0xc0,0xc0,0xc0, /* 124 */ +0xe0,0x30,0x30,0x30,0x1c,0x30,0x30,0x30,0x30,0xe0, /* 125 */ +0x76,0xdc, /* 126 */ +0x10,0x38,0x6c,0xc6,0xc6,0xc6,0xfe, /* 127 */ +0x3c,0x66,0xc2,0xc0,0xc0,0xc0,0xc2,0x66,0x3c,0x0c,0x06,0x7c, /* 128 */ +0xcc,0x00,0x00,0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0x76, /* 129 */ +0x0c,0x18,0x30,0x00,0x7c,0xc6,0xfe,0xc0,0xc0,0xc6,0x7c, /* 130 */ +0x10,0x38,0x6c,0x00,0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76, /* 131 */ +0xcc,0x00,0x00,0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76, /* 132 */ +0x60,0x30,0x18,0x00,0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76, /* 133 */ +0x38,0x6c,0x38,0x00,0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76, /* 134 */ +0x78,0xcc,0xc0,0xc0,0xcc,0x78,0x18,0x0c,0x78, /* 135 */ +0x10,0x38,0x6c,0x00,0x7c,0xc6,0xfe,0xc0,0xc0,0xc6,0x7c, /* 136 */ +0xc6,0x00,0x00,0x7c,0xc6,0xfe,0xc0,0xc0,0xc6,0x7c, /* 137 */ +0x60,0x30,0x18,0x00,0x7c,0xc6,0xfe,0xc0,0xc0,0xc6,0x7c, /* 138 */ +0xcc,0x00,0x00,0x70,0x30,0x30,0x30,0x30,0x30,0x78, /* 139 */ +0x30,0x78,0xcc,0x00,0x70,0x30,0x30,0x30,0x30,0x30,0x78, /* 140 */ +0xc0,0x60,0x30,0x00,0x70,0x30,0x30,0x30,0x30,0x30,0x78, /* 141 */ +0xc6,0x00,0x10,0x38,0x6c,0xc6,0xc6,0xfe,0xc6,0xc6,0xc6, /* 142 */ +0x38,0x6c,0x38,0x00,0x38,0x6c,0xc6,0xc6,0xfe,0xc6,0xc6,0xc6, /* 143 */ +0x18,0x30,0x60,0x00,0xfe,0x66,0x60,0x7c,0x60,0x60,0x66,0xfe, /* 144 */ +0xcc,0x76,0x36,0x7e,0xd8,0xd8,0x6e, /* 145 */ +0x3e,0x6c,0xcc,0xcc,0xfe,0xcc,0xcc,0xcc,0xcc,0xce, /* 146 */ +0x10,0x38,0x6c,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c, /* 147 */ +0xc6,0x00,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c, /* 148 */ +0x60,0x30,0x18,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c, /* 149 */ +0x30,0x78,0xcc,0x00,0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0x76, /* 150 */ +0x60,0x30,0x18,0x00,0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0x76, /* 151 */ +0xc6,0x00,0x00,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7e,0x06,0x0c,0x78, /* 152 */ +0xc6,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c, /* 153 */ +0xc6,0x00,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c, /* 154 */ +0x30,0x30,0x78,0xcc,0xc0,0xc0,0xc0,0xcc,0x78,0x30,0x30, /* 155 */ +0x38,0x6c,0x64,0x60,0xf0,0x60,0x60,0x60,0x60,0xe6,0xfc, /* 156 */ +0xcc,0xcc,0x78,0x30,0xfc,0x30,0xfc,0x30,0x30,0x30, /* 157 */ +0xf8,0xcc,0xcc,0xf8,0xc4,0xcc,0xde,0xcc,0xcc,0xcc,0xc6, /* 158 */ +0x0e,0x1b,0x18,0x18,0x18,0x7e,0x18,0x18,0x18,0x18,0x18,0xd8,0x70, /* 159 */ +0x18,0x30,0x60,0x00,0x78,0x0c,0x7c,0xcc,0xcc,0xcc,0x76, /* 160 */ +0x30,0x60,0xc0,0x00,0xe0,0x60,0x60,0x60,0x60,0x60,0xf0, /* 161 */ +0x18,0x30,0x60,0x00,0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0x7c, /* 162 */ +0x18,0x30,0x60,0x00,0xcc,0xcc,0xcc,0xcc,0xcc,0xcc,0x76, /* 163 */ +0x76,0xdc,0x00,0xdc,0x66,0x66,0x66,0x66,0x66,0x66, /* 164 */ +0x76,0xdc,0x00,0xc6,0xe6,0xf6,0xfe,0xde,0xce,0xc6,0xc6,0xc6, /* 165 */ +0x78,0xd8,0xd8,0x7c,0x00,0xfc, /* 166 */ +0x70,0xd8,0xd8,0x70,0x00,0xf8, /* 167 */ +0x30,0x30,0x00,0x30,0x30,0x60,0xc0,0xc6,0xc6,0x7c, /* 168 */ +0xfe,0xc0,0xc0,0xc0,0xc0, /* 169 */ +0xfe,0x06,0x06,0x06,0x06, /* 170 */ +0xc0,0xc0,0xc2,0xc6,0xcc,0x18,0x30,0x60,0xdc,0x86,0x0c,0x18,0x3e, /* 171 */ +0xc0,0xc0,0xc2,0xc6,0xcc,0x18,0x30,0x66,0xce,0x9e,0x3e,0x06,0x06, /* 172 */ +0x60,0x60,0x00,0x60,0x60,0x60,0xf0,0xf0,0xf0,0x60, /* 173 */ +0x36,0x6c,0xd8,0x6c,0x36, /* 174 */ +0xd8,0x6c,0x36,0x6c,0xd8, /* 175 */ +0x22,0x88,0x22,0x88,0x22,0x88,0x22,0x88,0x22,0x88,0x22,0x88,0x22,0x88,0x22,0x88, /* 176 */ +0x55,0xaa,0x55,0xaa,0x55,0xaa,0x55,0xaa,0x55,0xaa,0x55,0xaa,0x55,0xaa,0x55,0xaa, /* 177 */ +0xdd,0x77,0xdd,0x77,0xdd,0x77,0xdd,0x77,0xdd,0x77,0xdd,0x77,0xdd,0x77,0xdd,0x77, /* 178 */ +0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0, /* 179 */ +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xf8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, /* 180 */ +0x18,0x18,0x18,0x18,0x18,0xf8,0x18,0xf8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, /* 181 */ +0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xf6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, /* 182 */ +0xfe,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, /* 183 */ +0xf8,0x18,0xf8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, /* 184 */ +0x36,0x36,0x36,0x36,0x36,0xf6,0x06,0xf6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, /* 185 */ +0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8, /* 186 */ +0xfe,0x06,0xf6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, /* 187 */ +0x36,0x36,0x36,0x36,0x36,0xf6,0x06,0xfe, /* 188 */ +0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xfe, /* 189 */ +0x18,0x18,0x18,0x18,0x18,0xf8,0x18,0xf8, /* 190 */ +0xf8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, /* 191 */ +0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xf8, /* 192 */ +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xff, /* 193 */ +0xff,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, /* 194 */ +0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xf8,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0, /* 195 */ +0xff, /* 196 */ +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xff,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, /* 197 */ +0xc0,0xc0,0xc0,0xc0,0xc0,0xf8,0xc0,0xf8,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0, /* 198 */ +0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xdc,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8, /* 199 */ +0xd8,0xd8,0xd8,0xd8,0xd8,0xdc,0xc0,0xfc, /* 200 */ +0xfc,0xc0,0xdc,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8, /* 201 */ +0x36,0x36,0x36,0x36,0x36,0xf7,0x00,0xff, /* 202 */ +0xff,0x00,0xf7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, /* 203 */ +0xd8,0xd8,0xd8,0xd8,0xd8,0xdc,0xc0,0xdc,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8, /* 204 */ +0xff,0x00,0xff, /* 205 */ +0x36,0x36,0x36,0x36,0x36,0xf7,0x00,0xf7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, /* 206 */ +0x18,0x18,0x18,0x18,0x18,0xff,0x00,0xff, /* 207 */ +0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xff, /* 208 */ +0xff,0x00,0xff,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, /* 209 */ +0xff,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, /* 210 */ +0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xfc, /* 211 */ +0xc0,0xc0,0xc0,0xc0,0xc0,0xf8,0xc0,0xf8, /* 212 */ +0xf8,0xc0,0xf8,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0, /* 213 */ +0xfc,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8,0xd8, /* 214 */ +0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xff,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, /* 215 */ +0x18,0x18,0x18,0x18,0x18,0xff,0x18,0xff,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, /* 216 */ +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xf8, /* 217 */ +0xf8,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0, /* 218 */ +0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 219 */ +0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 220 */ +0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0, /* 221 */ +0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0, /* 222 */ +0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 223 */ +0x76,0xdc,0xd8,0xd8,0xd8,0xdc,0x76, /* 224 */ +0x78,0xcc,0xcc,0xcc,0xd8,0xcc,0xc6,0xc6,0xc6,0xcc, /* 225 */ +0xfe,0xc6,0xc6,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0, /* 226 */ +0xfe,0x6c,0x6c,0x6c,0x6c,0x6c,0x6c,0x6c, /* 227 */ +0xfe,0xc6,0x60,0x30,0x18,0x30,0x60,0xc6,0xfe, /* 228 */ +0x7e,0xd8,0xd8,0xd8,0xd8,0xd8,0x70, /* 229 */ +0x66,0x66,0x66,0x66,0x66,0x7c,0x60,0x60,0xc0, /* 230 */ +0x76,0xdc,0x18,0x18,0x18,0x18,0x18,0x18, /* 231 */ +0xfc,0x30,0x78,0xcc,0xcc,0xcc,0x78,0x30,0xfc, /* 232 */ +0x38,0x6c,0xc6,0xc6,0xfe,0xc6,0xc6,0x6c,0x38, /* 233 */ +0x38,0x6c,0xc6,0xc6,0xc6,0x6c,0x6c,0x6c,0x6c,0xee, /* 234 */ +0x3c,0x60,0x30,0x18,0x7c,0xcc,0xcc,0xcc,0xcc,0x78, /* 235 */ +0x7e,0xdb,0xdb,0xdb,0x7e, /* 236 */ +0x03,0x06,0x7e,0xdb,0xdb,0xf3,0x7e,0x60,0xc0, /* 237 */ +0x38,0x60,0xc0,0xc0,0xf8,0xc0,0xc0,0xc0,0x60,0x38, /* 238 */ +0x7c,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6,0xc6, /* 239 */ +0xfe,0x00,0x00,0xfe,0x00,0x00,0xfe, /* 240 */ +0x18,0x18,0x7e,0x18,0x18,0x00,0x00,0xff, /* 241 */ +0x60,0x30,0x18,0x0c,0x18,0x30,0x60,0x00,0xfc, /* 242 */ +0x18,0x30,0x60,0xc0,0x60,0x30,0x18,0x00,0xfc, /* 243 */ +0x70,0xd8,0xd8,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0, /* 244 */ +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xd8,0xd8,0xd8,0x70, /* 245 */ +0x30,0x30,0x00,0xfc,0x00,0x30,0x30, /* 246 */ +0x76,0xdc,0x00,0x76,0xdc, /* 247 */ +0x70,0xd8,0xd8,0x70, /* 248 */ +0xc0,0xc0, /* 249 */ +0xc0, /* 250 */ +0x0f,0x0c,0x0c,0x0c,0x0c,0x0c,0xec,0x6c,0x6c,0x3c,0x1c, /* 251 */ +0xd8,0x6c,0x6c,0x6c,0x6c,0x6c, /* 252 */ +0x70,0xd8,0x30,0x60,0xc8,0xf8, /* 253 */ +0xf8,0xf8,0xf8,0xf8,0xf8,0xf8,0xf8, /* 254 */ + /* 255 */ +}; +int vgaFontMetaData[256*5]={ +0,8,9,0,0,9,8,10,0,0,19,8,10,0,0,29,8,8,0,0,37,8,7,0,1,44,8,9,0,0,53,8,9,0,0,62,8,4,2,2,66,8,16,0,-4,82,8,6,1,1,88,8,16,0,-4,104,8,10,0,0,114,8,10,1,0,124,8,10,0,0,134,8,11,0,-1,145,8,9,0,0,154,8,11,0,0,165,8,11,0,0,176,8,9,1,1,185,8,10,1,0,195,8,10,0,0,205,8,12,0,-1,217,8,4,0,0,221,8,10,1,0,231,8,10,1,0,241,8,10,1,0,251,8,5,0,2,256,8,5,0,2,261,8,4,0,2,265,8,5,0,2,270,8,7,0,1,277,8,7,0,1,284,8,0,0,0,284,8,10,2,0,294,8,4,1,7,298,8,9,0,0,307,8,14,0,-2,321,8,8,0,0,329,8,10,0,0,339,8,4,1,7,343,8,10,2,0,353,8,10,2,0,363,8,5,0,2,368,8,5,1,2,373,8,4,2,-1,377,8,1,0,4,378,8,2,3,0,380,8,8,0,0,388,8,10,0,0,398,8,10,1,0,408,8,10,0,0,418,8,10,0,0,428,8,10,0,0,438,8,10,0,0,448,8,10,0,0,458,8,10,0,0,468,8,10,0,0,478,8,10,0,0,488,8,7,3,1,495,8,8,2,0,503,8,9,1,0,512,8,4,1,3,516,8,9,1,0,525,8,10,0,0,535,8,9,0,0,544,8,10,0,0,554,8,10,0,0,564,8,10,0,0,574,8,10,0,0,584,8,10,0,0,594,8,10,0,0,604,8,10,0,0,614,8,10,0,0,624,8,10,2,0,634,8,10,0,0,644,8,10,0,0,654,8,10,0,0,664,8,10,0,0,674,8,10,0,0,684,8,10,0,0,694,8,10,0,0,704,8,12,0,-2,716,8,10,0,0,726,8,10,0,0,736,8,10,1,0,746,8,10,0,0,756,8,10,0,0,766,8,10,0,0,776,8,10,0,0,786,8,10,1,0,796,8,10,0,0,806,8,10,2,0,816,8,9,0,0,825,8,10,2,0,835,8,4,0,8,839,8,1,0,-2,840,8,3,2,9,843,8,7,0,0,850,8,10,0,0,860,8,7,0,0,867,8,10,0,0,877,8,7,0,0,884,8,10,0,0,894,8,10,0,-3,904,8,10,0,0,914,8,10,2,0,924,8,13,1,-3,937,8,10,0,0,947,8,10,2,0,957,8,7,0,0,964,8,7,0,0,971,8,7,0,0,978,8,10,0,-3,988,8,10,0,-3,998,8,7,0,0,1005,8,7,0,0,1012,8,10,0,0,1022,8,7,0,0,1029,8,7,1,0,1036,8,7,0,0,1043,8,7,0,0,1050,8,10,0,-3,1060,8,7,0,0,1067,8,10,1,0,1077,8,10,3,0,1087,8,10,1,0,1097,8,2,0,8,1099,8,7,0,1,1106,8,12,0,-2,1118,8,10,0,0,1128,8,11,0,0,1139,8,11,0,0,1150,8,10,0,0,1160,8,11,0,0,1171,8,11,0,0,1182,8,9,1,-1,1191,8,11,0,0,1202,8,10,0,0,1212,8,11,0,0,1223,8,10,1,0,1233,8,11,1,0,1244,8,11,1,0,1255,8,11,0,0,1266,8,12,0,0,1278,8,12,0,0,1290,8,7,0,0,1297,8,10,0,0,1307,8,11,0,0,1318,8,10,0,0,1328,8,11,0,0,1339,8,11,0,0,1350,8,11,0,0,1361,8,13,0,-3,1374,8,11,0,0,1385,8,11,0,0,1396,8,11,1,0,1407,8,11,0,0,1418,8,10,1,0,1428,8,11,0,0,1439,8,13,0,-2,1452,8,11,0,0,1463,8,11,2,0,1474,8,11,0,0,1485,8,11,0,0,1496,8,10,0,0,1506,8,12,0,0,1518,8,6,1,5,1524,8,6,1,5,1530,8,10,0,0,1540,8,5,0,1,1545,8,5,0,1,1550,8,13,0,-2,1563,8,13,0,-2,1576,8,10,2,0,1586,8,5,0,2,1591,8,5,0,2,1596,8,16,1,-4,1612,8,16,0,-4,1628,8,16,0,-4,1644,8,16,3,-4,1660,8,16,0,-4,1676,8,16,0,-4,1692,8,16,0,-4,1708,8,9,0,-4,1717,8,11,0,-4,1728,8,16,0,-4,1744,8,16,2,-4,1760,8,11,0,-4,1771,8,8,0,4,1779,8,8,0,4,1787,8,8,0,4,1795,8,9,0,-4,1804,8,8,3,4,1812,8,8,0,4,1820,8,9,0,-4,1829,8,16,3,-4,1845,8,1,0,4,1846,8,16,0,-4,1862,8,16,3,-4,1878,8,16,2,-4,1894,8,8,2,4,1902,8,11,2,-4,1913,8,8,0,4,1921,8,11,0,-4,1932,8,16,2,-4,1948,8,3,0,4,1951,8,16,0,-4,1967,8,8,0,4,1975,8,8,0,4,1983,8,11,0,-4,1994,8,9,0,-4,2003,8,8,2,4,2011,8,8,3,4,2019,8,11,3,-4,2030,8,9,2,-4,2039,8,16,0,-4,2055,8,16,0,-4,2071,8,8,0,4,2079,8,9,3,-4,2088,8,16,0,-4,2104,8,9,0,-4,2113,8,16,0,-4,2129,8,16,4,-4,2145,8,7,0,5,2152,8,7,0,0,2159,8,10,0,0,2169,8,10,0,0,2179,8,8,0,0,2187,8,9,0,0,2196,8,7,0,0,2203,8,9,0,-1,2212,8,8,0,0,2220,8,9,1,0,2229,8,9,0,0,2238,8,10,0,0,2248,8,10,1,0,2258,8,5,0,2,2263,8,9,0,0,2272,8,10,1,0,2282,8,9,0,0,2291,8,7,0,1,2298,8,8,0,0,2306,8,9,1,0,2315,8,9,1,0,2324,8,14,3,-4,2338,8,12,0,0,2350,8,7,1,1,2357,8,5,0,2,2362,8,4,1,7,2366,8,2,3,3,2368,8,1,3,3,2369,8,11,0,0,2380,8,6,0,5,2386,8,6,0,5,2392,8,7,1,1,2399,8,0,0,0,}; +rfbFontData vgaFont={vgaFontData, vgaFontMetaData}; diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/Makefile.am b/jni/vnc/LibVNCServer-0.9.9/webclients/Makefile.am new file mode 100644 index 0000000..6c2db84 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/Makefile.am @@ -0,0 +1,4 @@ +SUBDIRS = java-applet +DIST_SUBDIRS = java-applet +EXTRA_DIST=index.vnc novnc + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/Makefile.in b/jni/vnc/LibVNCServer-0.9.9/webclients/Makefile.in new file mode 100644 index 0000000..0200eb9 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/Makefile.in @@ -0,0 +1,585 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = webclients +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/rfbconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AVAHI_CFLAGS = @AVAHI_CFLAGS@ +AVAHI_LIBS = @AVAHI_LIBS@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CRYPT_LIBS = @CRYPT_LIBS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LDFLAGS = @JPEG_LDFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +RPMSOURCEDIR = @RPMSOURCEDIR@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSL_LIBS = @SSL_LIBS@ +STRIP = @STRIP@ +SYSTEM_LIBVNCSERVER_CFLAGS = @SYSTEM_LIBVNCSERVER_CFLAGS@ +SYSTEM_LIBVNCSERVER_LIBS = @SYSTEM_LIBVNCSERVER_LIBS@ +VERSION = @VERSION@ +WSOCKLIB = @WSOCKLIB@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_ffmpeg = @with_ffmpeg@ +SUBDIRS = java-applet +DIST_SUBDIRS = java-applet +EXTRA_DIST = index.vnc novnc +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu webclients/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu webclients/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ + install-am install-strip tags-recursive + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic clean-libtool \ + ctags ctags-recursive distclean distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/index.vnc b/jni/vnc/LibVNCServer-0.9.9/webclients/index.vnc new file mode 100644 index 0000000..0a92bd4 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/index.vnc @@ -0,0 +1,45 @@ + + + + + +$USER's $DESKTOP desktop ($DISPLAY) + + + + + + +
+
+ +If the above Java applet does not work, you can also try the new JavaScript-only noVNC viewer. You will need a HTML5-capable browser though. + +
+ +
+ +
+
+
+LibVNCServer/LibVNCClient Homepage + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/Makefile.am b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/Makefile.am new file mode 100644 index 0000000..d6d10e4 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/Makefile.am @@ -0,0 +1,5 @@ +EXTRA_DIST=VncViewer.jar javaviewer.pseudo_proxy.patch + +SUBDIRS = ssl +DIST_SUBDIRS = ssl + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/Makefile.in b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/Makefile.in new file mode 100644 index 0000000..1e41c43 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/Makefile.in @@ -0,0 +1,585 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = webclients/java-applet +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/rfbconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AVAHI_CFLAGS = @AVAHI_CFLAGS@ +AVAHI_LIBS = @AVAHI_LIBS@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CRYPT_LIBS = @CRYPT_LIBS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LDFLAGS = @JPEG_LDFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +RPMSOURCEDIR = @RPMSOURCEDIR@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSL_LIBS = @SSL_LIBS@ +STRIP = @STRIP@ +SYSTEM_LIBVNCSERVER_CFLAGS = @SYSTEM_LIBVNCSERVER_CFLAGS@ +SYSTEM_LIBVNCSERVER_LIBS = @SYSTEM_LIBVNCSERVER_LIBS@ +VERSION = @VERSION@ +WSOCKLIB = @WSOCKLIB@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_ffmpeg = @with_ffmpeg@ +EXTRA_DIST = VncViewer.jar javaviewer.pseudo_proxy.patch +SUBDIRS = ssl +DIST_SUBDIRS = ssl +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu webclients/java-applet/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu webclients/java-applet/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ + install-am install-strip tags-recursive + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic clean-libtool \ + ctags ctags-recursive distclean distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/VncViewer.jar b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/VncViewer.jar new file mode 100644 index 0000000..602fdb9 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/VncViewer.jar differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/javaviewer.pseudo_proxy.patch b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/javaviewer.pseudo_proxy.patch new file mode 100644 index 0000000..4d2f36e --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/javaviewer.pseudo_proxy.patch @@ -0,0 +1,141 @@ +diff -ru vnc_javasrc/OptionsFrame.java proxy_vnc_javasrc/OptionsFrame.java +--- vnc_javasrc/OptionsFrame.java Fri Jul 5 08:17:23 2002 ++++ proxy_vnc_javasrc/OptionsFrame.java Thu Aug 22 23:24:44 2002 +@@ -70,6 +70,12 @@ + + Label[] labels = new Label[names.length]; + Choice[] choices = new Choice[names.length]; ++ ++ Label proxyHostLabel; ++ TextField proxyHostEdit; ++ Label proxyPortLabel; ++ TextField proxyPortEdit; ++ + Button closeButton; + VncViewer viewer; + +@@ -93,6 +99,9 @@ + boolean shareDesktop; + boolean viewOnly; + ++ String proxyHost; ++ int proxyPort; ++ + // + // Constructor. Set up the labels and choices from the names and values + // arrays. +@@ -126,6 +135,32 @@ + } + } + ++ // TODO: find a way to set these to defaults from browser ++ proxyPort = viewer.readIntParameter("Use Proxy Port", -1); ++ if(proxyPort>-1) { ++ proxyHost = viewer.readParameter("Use Proxy Host", false); ++ if(proxyHost == null) ++ proxyHost = viewer.host; ++ ++ proxyHostLabel = new Label("Proxy Host"); ++ gbc.gridwidth = 1; ++ gridbag.setConstraints(proxyHostLabel,gbc); ++ add(proxyHostLabel); ++ proxyHostEdit = new TextField(); ++ gbc.gridwidth = GridBagConstraints.REMAINDER; ++ gridbag.setConstraints(proxyHostEdit,gbc); ++ add(proxyHostEdit); ++ ++ proxyPortLabel = new Label("Proxy Port"); ++ gbc.gridwidth = 1; ++ gridbag.setConstraints(proxyPortLabel,gbc); ++ add(proxyPortLabel); ++ proxyPortEdit = new TextField(); ++ gbc.gridwidth = GridBagConstraints.REMAINDER; ++ gridbag.setConstraints(proxyPortEdit,gbc); ++ add(proxyPortEdit); ++ } ++ + closeButton = new Button("Close"); + gbc.gridwidth = GridBagConstraints.REMAINDER; + gridbag.setConstraints(closeButton, gbc); +@@ -161,6 +196,11 @@ + } + } + ++ if(proxyPort>-1) { ++ proxyPortEdit.setText(Integer.toString(proxyPort)); ++ proxyHostEdit.setText(proxyHost); ++ } ++ + // Make the booleans and encodings array correspond to the state of the GUI + + setEncodings(); +@@ -361,8 +401,12 @@ + // + + public void actionPerformed(ActionEvent evt) { +- if (evt.getSource() == closeButton) ++ if (evt.getSource() == closeButton) { + setVisible(false); ++ proxyHost = proxyHostEdit.getText(); ++ proxyPort = Integer.parseInt(proxyPortEdit.getText()); ++ System.err.println("proxy is " + proxyHost + ":" + proxyPort); ++ } + } + + // +diff -ru vnc_javasrc/RfbProto.java proxy_vnc_javasrc/RfbProto.java +--- vnc_javasrc/RfbProto.java Sun Aug 4 18:39:35 2002 ++++ proxy_vnc_javasrc/RfbProto.java Thu Aug 22 22:53:53 2002 +@@ -119,12 +119,51 @@ + viewer = v; + host = h; + port = p; +- sock = new Socket(host, port); ++ if(viewer.options.proxyPort>-1) ++ sock = new Socket(viewer.options.proxyHost, viewer.options.proxyPort); ++ else ++ sock = new Socket(host, port); + is = new DataInputStream(new BufferedInputStream(sock.getInputStream(), + 16384)); + os = sock.getOutputStream(); ++ if(viewer.options.proxyPort>-1) ++ negotiateProxy(host,port); + } + ++ // this is inefficient as hell, but only used once per connection ++ String readLine() { ++ byte[] ba = new byte[1]; ++ String s = new String(""); ++ ++ ba[0]=0; ++ try { ++ while(ba[0] != 0xa) { ++ ba[0] = (byte)is.readUnsignedByte(); ++ s += new String(ba); ++ } ++ } catch(Exception e) { ++ e.printStackTrace(); ++ } ++ return s; ++ } ++ ++ void negotiateProxy(String realHost,int realPort) throws IOException { ++ String line; ++ ++ // this would be the correct way, but we want to trick strict proxies. ++ // line = "CONNECT " + realHost + ":" + realPort + " HTTP/1.1\r\nHost: " + realHost + ":" + realPort + "\r\n\r\n"; ++ line = "GET " + realHost + ":" + realPort + "/proxied.connection HTTP/1.0\r\nPragma: No-Cache\r\nProxy-Connection: Keep-Alive\r\n\r\n"; ++ os.write(line.getBytes()); ++ ++ line = readLine(); ++ System.err.println("Proxy said: " + line); ++ if(!(line.substring(0,7)+line.substring(8,12)).equalsIgnoreCase("HTTP/1. 200")) { ++ IOException e = new IOException(line); ++ throw e; ++ } ++ while(!line.equals("\r\n") && !line.equals("\n")) ++ line = readLine(); ++ } + + void close() { + try { diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/Makefile.am b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/Makefile.am new file mode 100644 index 0000000..fd1c201 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/Makefile.am @@ -0,0 +1,2 @@ +EXTRA_DIST=VncViewer.jar index.vnc SignedVncViewer.jar proxy.vnc README ss_vncviewer onetimekey UltraViewerSSL.jar SignedUltraViewerSSL.jar ultra.vnc ultrasigned.vnc ultraproxy.vnc + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/Makefile.in b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/Makefile.in new file mode 100644 index 0000000..917e77e --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/Makefile.in @@ -0,0 +1,382 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = webclients/java-applet/ssl +DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/rfbconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AVAHI_CFLAGS = @AVAHI_CFLAGS@ +AVAHI_LIBS = @AVAHI_LIBS@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CRYPT_LIBS = @CRYPT_LIBS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTK_CFLAGS = @GTK_CFLAGS@ +GTK_LIBS = @GTK_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LDFLAGS = @JPEG_LDFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +RPMSOURCEDIR = @RPMSOURCEDIR@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSL_LIBS = @SSL_LIBS@ +STRIP = @STRIP@ +SYSTEM_LIBVNCSERVER_CFLAGS = @SYSTEM_LIBVNCSERVER_CFLAGS@ +SYSTEM_LIBVNCSERVER_LIBS = @SYSTEM_LIBVNCSERVER_LIBS@ +VERSION = @VERSION@ +WSOCKLIB = @WSOCKLIB@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_ffmpeg = @with_ffmpeg@ +EXTRA_DIST = VncViewer.jar index.vnc SignedVncViewer.jar proxy.vnc README ss_vncviewer onetimekey UltraViewerSSL.jar SignedUltraViewerSSL.jar ultra.vnc ultrasigned.vnc ultraproxy.vnc +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu webclients/java-applet/ssl/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu webclients/java-applet/ssl/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/README b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/README new file mode 100644 index 0000000..b244cf1 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/README @@ -0,0 +1,338 @@ +This directory contains a patched Java applet VNC viewer that is SSL +enabled. + +The patches in the *.patch files are relative to the source tarball: + + tightvnc-1.3dev7_javasrc.tar.gz + +currently (4/06) available here: + + http://prdownloads.sourceforge.net/vnc-tight/tightvnc-1.3dev7_javasrc.tar.gz?download + +It also includes some simple patches to: + + - fix richcursor colors + + - make the Java Applet cursor (not the cursor drawn to the canvas + framebuffer) invisible when it is inside the canvas. + + - allow Tab (and some other) keystrokes to be sent to the vnc + server instead of doing widget traversal. + + +This SSL applet should work with any VNC viewer that has an SSL tunnel in +front of it. It has been tested on x11vnc and using the stunnel tunnel +to other VNC servers. + +By default this Vnc Viewer will only do SSL. To do unencrypted traffic +see the "DisableSSL" applet parameter (e.g. set it to Yes in index.vnc). + +Proxies: they are a general problem with java socket applets (a socket +connection does not go through the proxy). See the info in the proxy.vnc +file for a workaround. It uses SignedVncViewer.jar which is simply +a signed version of VncViewer.jar. The basic idea is the user clicks +"Yes" to trust the applet and then it can connect directly to the proxy +and issue a CONNECT request. + +This applet has been tested on versions 1.4.2 and 1.5.0 of the Sun +Java plugin. It may not work on older releases or different vendor VM's. +Send full Java Console output for failures. + +--------------------------------------------------------------- +Tips: + +When doing single-port proxy connections (e.g. both VNC and HTTPS +thru port 5900) it helps to move through the 'do you trust this site' +dialogs quickly. x11vnc has to wait to see if the traffic is VNC or +HTTP and this can cause timeouts if you don't move thru them quickly. + +You may have to restart your browser completely if it gets into a +weird state. For one case we saw the JVM requesting VncViewer.class +even when no such file exists. + + +--------------------------------------------------------------- +Extras: + +ss_vncviewer (not Java): + + Wrapper script for native VNC viewer to connect to x11vnc in + SSL mode. Script launches stunnel(8) and then connects to it + via localhost which in turn is then redirected to x11vnc via an + SSL tunnel. stunnel(8) must be installed and available in PATH. + + +Running Java SSL VncViewer from the command line: + + From this directory: + + java -cp ./VncViewer.jar VncViewer HOST PORT + + substitute and with the actual values. + You can add any other parameters, e.g.: ignoreProxy yes + +--------------------------------------------------------------- +UltraVNC: + +The UltraVNC java viewer has also been patched to support SSL. Various +bugs in the UltraVNC java viewer were also fixed. This viewer can be +useful because is support UltraVNC filetransfer, and so it works on +Unix, etc. + +UltraViewerSSL.jar +SignedUltraViewerSSL.jar +ultra.vnc +ultraproxy.vnc +ultravnc-102-JavaViewer-ssl-etc.patch + +--------------------------------------------------------------- +Applet Parameters: + +Some additional applet parameters can be set via the URL, e.g. + + http://host:5800/?param=value + http://host:5800/ultra.vnc?param=value + https://host:5900/ultra.vnc?param=value + +etc. If running java from command line as show above, it comes +in as java ... VncViewer param value ... + +There is a limitation with libvncserver that param and value can +only be alphanumeric, underscore, "+" (for space), or "." + +We have added some applet parameters to the stock VNC java +viewers. Here are the applet parameters: + +Both TightVNC and UltraVNC Java viewers: + + HOST + string, default: none. + The Hostname to connect to. + + PORT + number, default: 0 + The VNC server port to connect to. + + Open New Window + yes/no, default: no + Run applet in separate frame. + + Show Controls + yes/no, default: yes + Show Controls button panel. + + Show Offline Desktop + yes/no, default: no + Do we continue showing desktop on remote disconnect? + + Defer screen updates + number, default: 20 + Milliseconds delay + + Defer cursor updates + number, default: 10 + Milliseconds delay + + Defer update requests + number, default: 50 + Milliseconds delay + + PASSWORD + string, default: none + VNC session password in plain text. + + ENCPASSWORD + string, default: none + VNC session password in encrypted in DES with KNOWN FIXED + key. It is a hex string. This is like the ~/.vnc/passwd format. + + + The following are added by x11vnc and/or ssvnc project + + VNCSERVERPORT + number, default: 0 + Like PORT, but if there is a firewall this is the Actual VNC + server port. PORT might be a redir port on the firewall. + + DisableSSL + yes/no, default: no + Do unencrypted connection, no SSL. + + httpsPort + number, default: none + When checking for proxy, use this at the url port number. + + CONNECT + string, default: none + Sets to host:port for the CONNECT line to a Web proxy. + The Web proxy should connect us to it. + + GET + yes/no, default: no + Set to do a special HTTP GET (/request.https.vnc.connection) + to the vnc server that will cause it to switch to VNC instead. + This is to speedup/make more robust, the single port HTTPS and VNC + mode of x11vnc (e.g. both services thru port 5900, etc) + + urlPrefix + string, default: none + set to a string that will be prefixed to all URL's when contacting + the VNC server. Idea is a special proxy will use this to indicate + internal hostname, etc. + + oneTimeKey + string, default: none + set a special hex "key" to correspond to an SSL X.509 cert+key. + See the 'onetimekey' helper script. Can also be PROMPT to prompt + the user to paste the hex key string in. + + This provides a Client-Side cert+key that the client will use to + authenticate itself by SSL To the VNC Server. + + This is to try to work around the problem that the Java applet + cannot keep an SSL keystore on disk, etc. E.g. if they log + into an HTTPS website via password they are authenticated and + encrypted, then the website can safely put oneTimeKey=... on the + URL. The Vncviewer authenticates the VNC server with this key. + + Note that there is currently a problem in that if x11vnc requires + Client Certificates the user cannot download the index.vnc HTML + and VncViewer.jar from the same x11vnc. Those need to come from + a different x11vnc or from a web server. + + Note that the HTTPS website can also put the VNC Password + (e.g. a temporary/one-time one) in the parameter PASSWORD. + The Java Applet will automatically supply this VNC password + instead of prompting. + + serverCert + string, default: none + set a special hex "cert" to correspond to an SSL X.509 cert + See the 'onetimekey -certonly' helper script. + + This provides a Server-Side cert that the client will authenticate + the VNC Server against by SSL. + + This is to try to work around the problem that the Java applet + cannot keep an SSL keystore on disk, etc. E.g. if they log + into an HTTPS website via password they are authenticated and + encrypted, then the website can safely put serverCert=... on the + URL. + + Of course the VNC Server is sending this string to the Java + Applet, so this is only reasonable security if the VNC Viewer + already trusts the HTTPS retrieval of the URL + serverCert param + that it gets. This should be done over HTTPS not HTTP. + + proxyHost + string, default: none + Do not try to guess the proxy's hostname, use the value in + proxyHost. Does not imply forceProxy (below.) + + proxyPort + string, default: none + Do not try to guess the proxy's port number, use the value in + proxyPort. Does not imply forceProxy (below.) + + forceProxy + yes/no, default: no + Assume there is a proxy and force its use. + + If a string other than "yes" or "no" is given, it implies "yes" + and uses the string for proxyHost and proxyPort (see above). + In this case the string must be of the form "hostname+port". + Note that it is "+" and not ":" before the port number. + + ignoreProxy + yes/no, default: no + Don't check for a proxy, assume there is none. + + trustAllVncCerts + yes/no, default: no + Automatically trust any cert received from the VNC server + (obviously this could be dangerous and lead to man in the + middle attack). Do not ask the user to verify any of these + certs from the VNC server. + + trustUrlVncCert + yes/no, default: no + Automatically trust any cert that the web browsers has accepted. + E.g. the user said "Yes" or "Continue" to a web browser dialog + regarding a certificate. If we get the same cert (chain) from + the VNC server we trust it without prompting the user. + + debugCerts + yes/no, default: no + Print out every cert in the Server, TrustUrl, TrustAll chains. + + +TightVNC Java viewer only: + + Offer Relogin + yes/no, default: yes + "Offer Relogin" set to "No" disables "Login again" + + SocketFactory + string, default: none + set Java Socket class factory. + +UltraVNC Java viewer only: + + None. + + The following are added by x11vnc and/or ssvnc project + + ftpDropDown + string, default: none + Sets the file transfer "drives" dropdown to the "." separated + list. Use "+" for space. The default is + + My+Documents.Desktop.Home + + for 3 entries in the dropdown in addition to the "drives" + (e.g. C:\) These items should be expanded properly by the VNC + Server. x11vnc will prepend $HOME to them, which is normally + what one wants. To include a "/" use "_2F_". Another example: + + Home.Desktop.bin_2F_linux + + If an item is prefixed with "TOP_" then the item is inserted at + the top of the drop down rather than being appended to the end. + E.g. to try to initially load the user homedir instead of /: + + TOP_Home.My+Documents.Desktop + + If ftpDropDown is set to the empty string, "", then no special + locations, [Desktop] etc., are placed in the drop down. Only the + ultravnc "drives" will appear. + + ftpOnly + yes/no, default: no + The VNC viewer only shows the filetransfer panel, no desktop + is displayed. + + graftFtp + yes/no, default: no + As ftpOnly, the VNC viewer only shows the filetransfer panel, + no desktop is displayed, however it is "grafted" onto an existing + SSVNC unix vncviewer. The special SSVNC vncviewer merges the two + channels. + + dsmActive + yes/no, default: no + Special usage mode with the SSVNC unix vncviewer. The UltraVNC + DSM encryption is active. Foolishly, UltraVNC DSM encryption + *MODIFIES* the VNC protocol when active (it is not a pure tunnel). + This option indicates to modify the VNC protocol to make this work. + Usually only used with graftFtp and SSVNC unix vncviewer. + + delayAuthPanel + yes/no, default: no + This is another special usage mode with the SSVNC unix vncviewer. + A login panel is delayed (not shown at startup.) Could be useful + for non SSVNC usage too. + + ignoreMSLogonCheck + yes/no, default: no + Similar to delayAuthPanel, do not put up a popup asking for + Windows username, etc. diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/SignedUltraViewerSSL.jar b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/SignedUltraViewerSSL.jar new file mode 100644 index 0000000..6c18737 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/SignedUltraViewerSSL.jar differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/SignedVncViewer.jar b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/SignedVncViewer.jar new file mode 100644 index 0000000..95c0b0b Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/SignedVncViewer.jar differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/UltraViewerSSL.jar b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/UltraViewerSSL.jar new file mode 100644 index 0000000..45259fd Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/UltraViewerSSL.jar differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/VncViewer.jar b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/VncViewer.jar new file mode 100644 index 0000000..9453c6f Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/VncViewer.jar differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/index.vnc b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/index.vnc new file mode 100644 index 0000000..ec520dc --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/index.vnc @@ -0,0 +1,26 @@ + + + + +$USER's $DESKTOP desktop ($DISPLAY) + + + + +$PARAMS + +
+x11vnc site + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/onetimekey b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/onetimekey new file mode 100755 index 0000000..bf57c8f --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/onetimekey @@ -0,0 +1,65 @@ +#!/bin/sh +# +# usage: onetimekey path/to/mycert.pem +# onetimekey -certonly path/to/mycert.pem +# +# Takes an openssl cert+key pem file and turns into a long string +# for the x11vnc SSL VNC Java Viewer. +# +# The Java applet URL parameter can be oneTimeKey= where str is +# the output of this program, or can be oneTimeKey=PROMPT in which +# case the applet will ask you to paste in the string. +# +# The problem trying to be solved here is it is difficult to get +# the Java applet to have or use a keystore with the key saved +# in it. Also, as the name implies, an HTTPS server can create +# a one time key to send to the applet (the user has already +# logged in via password to the HTTPS server). +# +# Note oneTimeKey is to provide a CLIENT Certificate for the viewer +# to authenticate itself to the VNC Server. +# +# There is also the serverCert= Applet parameter. This is +# a cert to authenticate the VNC server against. To create that +# string with this tool specify -certonly as the first argument. + +certonly="" +if [ "X$1" = "X-certonly" ]; then + shift + certonly=1 +fi + +in=$1 +der=/tmp/1time$$.der +touch $der +chmod 600 $der + +openssl pkcs8 -topk8 -nocrypt -in "$in" -out "$der" -outform der + +pbinhex=/tmp/pbinhex.$$ +cat > $pbinhex < + + + + + + +$USER's $DESKTOP desktop ($DISPLAY) + + + + +$PARAMS + +
+x11vnc site + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ss_vncviewer b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ss_vncviewer new file mode 100755 index 0000000..7e793ff --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ss_vncviewer @@ -0,0 +1,3676 @@ +#!/bin/sh +# +# ss_vncviewer: wrapper for vncviewer to use an stunnel SSL tunnel +# or an SSH tunnel. +# +# Copyright (c) 2006-2009 by Karl J. Runge +# +# ss_vncviewer is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or (at +# your option) any later version. +# +# ss_vncviewer is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with ss_vncviewer; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA +# or see . +# +# +# You must have stunnel(8) installed on the system and in your PATH +# (however, see the -ssh option below, in which case you will need ssh(1) +# installed) Note: stunnel is usually installed in an "sbin" subdirectory. +# +# You should have "x11vnc -ssl ..." or "x11vnc -stunnel ..." +# already running as the VNC server on the remote machine. +# (or use stunnel on the server side for any other VNC server) +# +# +# Usage: ss_vncviewer [cert-args] host:display +# +# e.g.: ss_vncviewer snoopy:0 +# ss_vncviewer snoopy:0 -encodings "copyrect tight zrle hextile" +# +# [cert-args] can be: +# +# -verify /path/to/cacert.pem +# -mycert /path/to/mycert.pem +# -crl /path/to/my_crl.pem (or directory) +# -proxy host:port +# +# -verify specifies a CA cert PEM file (or a self-signed one) for +# authenticating the VNC server. +# +# -mycert specifies this client's cert+key PEM file for the VNC server to +# authenticate this client. +# +# -proxy try host:port as a Web proxy to use the CONNECT method +# to reach the VNC server (e.g. your firewall requires a proxy). +# +# For the "double proxy" case use -proxy host1:port1,host2:port2 +# (the first CONNECT is done through host1:port1 to host2:port2 +# and then a 2nd CONNECT to the destination VNC server.) +# +# Use socks://host:port, socks4://host:port, or socks5://host,port +# to force usage of a SOCKS proxy. Also repeater://host:port and +# sslrepeater://host:port. +# +# -showcert Only fetch the certificate using the 'openssl s_client' +# command (openssl(1) must in installed). On ssvnc 1.0.27 and +# later the bundled command 'ultravnc_dsm_helper' is used. +# +# See http://www.karlrunge.com/x11vnc/faq.html#faq-ssl-ca for details on +# SSL certificates with VNC. +# +# A few other args (not related to SSL and certs): +# +# -2nd Run the vncviewer a 2nd time if the first connections fails. +# +# -ssh Use ssh instead of stunnel SSL. ssh(1) must be installed and you +# must be able to log into the remote machine via ssh. +# +# In this case "host:display" may be of the form "user@host:display" +# where "user@host" is used for the ssh login (see ssh(1) manpage). +# +# If -proxy is supplied it can be of the forms: "gwhost" "gwhost:port" +# "user@gwhost" or "user@gwhost:port". "gwhost" is an incoming ssh +# gateway machine (the VNC server is not running there), an ssh -L +# redir is used to "host" in "host:display" from "gwhost". Any "user@" +# part must be in the -proxy string (not in "host:display"). +# +# Under -proxy use "gwhost:port" if connecting to any ssh port +# other than the default (22). (even for the non-gateway case, +# -proxy must be used to specify a non-standard ssh port) +# +# A "double ssh" can be specified via a -proxy string with the two +# hosts separated by a comma: +# +# [user1@]host1[:port1],[user2@]host2[:port2] +# +# in which case a ssh to host1 and thru it via a -L redir a 2nd +# ssh is established to host2. +# +# Examples: +# +# ss_vncviewer -ssh bob@bobs-home.net:0 +# ss_vncviewer -ssh -sshcmd 'x11vnc -localhost' bob@bobs-home.net:0 +# +# ss_vncviewer -ssh -proxy fred@mygate.com:2022 mymachine:0 +# ss_vncviewer -ssh -proxy bob@bobs-home.net:2222 localhost:0 +# +# ss_vncviewer -ssh -proxy fred@gw-host,fred@peecee localhost:0 +# +# -sshcmd cmd Run "cmd" via ssh instead of the default "sleep 15" +# e.g. -sshcmd 'x11vnc -display :0 -localhost -rfbport 5900' +# +# -sshargs "args" pass "args" to the ssh process, e.g. -L/-R port redirs. +# +# -sshssl Tunnel the SSL connection thru a SSH connection. The tunnel as +# under -ssh is set up and the SSL connection goes thru it. Use +# this if you want to have and end-to-end SSL connection but must +# go thru a SSH gateway host (e.g. not the vnc server). Or use +# this if you need to tunnel additional services via -R and -L +# (see -sshargs above). +# +# ss_vncviewer -sshssl -proxy fred@mygate.com mymachine:0 +# +# -listen (or -reverse) set up a reverse connection. +# +# -alpha turn on cursor alphablending hack if you are using the +# enhanced tightvnc vncviewer. +# +# -grab turn on XGrabServer hack if you are using the enhanced tightvnc +# vncviewer (e.g. for fullscreen mode in some windowmanagers like +# fvwm that do not otherwise work in fullscreen mode) +# +# +# set VNCVIEWERCMD to whatever vncviewer command you want to use. +# +VNCIPCMD=${VNCVIEWERCMD:-vncip} +VNCVIEWERCMD=${VNCVIEWERCMD:-vncviewer} +if [ "X$SSVNC_TURBOVNC" != "X" ]; then + if echo "$VNCVIEWERCMD" | grep '\.turbovnc' > /dev/null; then + : + else + if type "$VNCVIEWERCMD.turbovnc" > /dev/null 2>/dev/null; then + VNCVIEWERCMD="$VNCVIEWERCMD.turbovnc" + fi + fi +fi +# +# Same for STUNNEL, e.g. set it to /path/to/stunnel or stunnel4, etc. +# + +# turn on verbose debugging output +if [ "X$SS_DEBUG" != "X" -a "X$SS_DEBUG" != "X0" ]; then + set -xv +fi + +PATH=$PATH:/usr/sbin:/usr/local/sbin:/dist/sbin; export PATH + +localhost="localhost" +if uname | grep Darwin >/dev/null; then + localhost="127.0.0.1" +fi + +# work out which stunnel to use (debian installs as stunnel4) +stunnel_set_here="" +if [ "X$STUNNEL" = "X" ]; then + check_stunnel=1 + if [ "X$SSVNC_BASEDIRNAME" != "X" ]; then + if [ -x "$SSVNC_BASEDIRNAME/stunnel" ]; then + type stunnel > /dev/null 2>&1 + if [ $? = 0 ]; then + # found ours + STUNNEL=stunnel + check_stunnel=0 + fi + fi + fi + if [ "X$check_stunnel" = "X1" ]; then + type stunnel4 > /dev/null 2>&1 + if [ $? = 0 ]; then + STUNNEL=stunnel4 + else + STUNNEL=stunnel + fi + fi + stunnel_set_here=1 +fi + +help() { + tail -n +2 "$0" | sed -e '/^$/ q' +} + +secondtry="" +gotalpha="" +use_ssh="" +use_sshssl="" +direct_connect="" +ssh_sleep=15 + +# sleep longer in -listen mode: +if echo "$*" | grep '.*-listen' > /dev/null; then + ssh_sleep=1800 +fi + + +ssh_cmd="" +# env override of ssh_cmd: +if [ "X$SS_VNCVIEWER_SSH_CMD" != "X" ]; then + ssh_cmd="$SS_VNCVIEWER_SSH_CMD" +fi + +ssh_args="" +showcert="" +reverse="" + +ciphers="" +anondh="ALL:RC4+RSA:+SSLv2:@STRENGTH" +anondh_set="" +stunnel_debug="6" +if [ "X$SS_DEBUG" != "X" -o "X$SSVNC_VENCRYPT_DEBUG" != "X" -o "X$SSVNC_STUNNEL_DEBUG" != "X" ]; then + stunnel_debug="7" +fi + +if [ "X$1" = "X-viewerflavor" ]; then + # special case, try to guess which viewer: + # + if echo "$VNCVIEWERCMD" | egrep -i '^(xmessage|sleep )' > /dev/null; then + echo "unknown" + exit 0 + fi + if echo "$VNCVIEWERCMD" | grep -i chicken.of > /dev/null; then + echo "cotvnc" + exit 0 + fi + if echo "$VNCVIEWERCMD" | grep -i ultra > /dev/null; then + echo "ultravnc" + exit 0 + fi + # OK, run it for help output... + str=`$VNCVIEWERCMD -h 2>&1 | head -n 5` + if echo "$str" | grep -i 'TightVNC.viewer' > /dev/null; then + echo "tightvnc" + elif echo "$str" | grep -i 'VNC viewer version 3' > /dev/null; then + echo "realvnc3" + elif echo "$str" | grep -i 'VNC viewer .*Edition 4' > /dev/null; then + echo "realvnc4" + elif echo "$str" | grep -i 'RealVNC.Ltd' > /dev/null; then + echo "realvnc4" + else + echo "unknown" + fi + exit 0 +fi +if [ "X$1" = "X-viewerhelp" ]; then + $VNCVIEWERCMD -h 2>&1 + exit 0 +fi + +# grab our cmdline options: +while [ "X$1" != "X" ] +do + case $1 in + "-verify") shift; verify="$1" + ;; + "-mycert") shift; mycert="$1" + ;; + "-crl") shift; crl="$1" + ;; + "-proxy") shift; proxy="$1" + ;; + "-ssh") use_ssh=1 + ;; + "-sshssl") use_ssh=1 + use_sshssl=1 + ;; + "-sshcmd") shift; ssh_cmd="$1" + ;; + "-sshargs") shift; ssh_args="$1" + ;; + "-anondh") ciphers="ciphers=$anondh" + ULTRAVNC_DSM_HELPER_SHOWCERT_ADH=1 + export ULTRAVNC_DSM_HELPER_SHOWCERT_ADH + anondh_set=1 + ;; + "-ciphers") shift; ciphers="ciphers=$1" + ;; + "-alpha") gotalpha=1 + ;; + "-showcert") showcert=1 + ;; + "-listen") reverse=1 + ;; + "-reverse") reverse=1 + ;; + "-2nd") secondtry=1 + ;; + "-grab") VNCVIEWER_GRAB_SERVER=1; export VNCVIEWER_GRAB_SERVER + ;; + "-x11cursor") VNCVIEWER_X11CURSOR=1; export VNCVIEWER_X11CURSOR + ;; + "-rawlocal") VNCVIEWER_RAWLOCAL=1; export VNCVIEWER_RAWLOCAL + ;; + "-scale") shift; SSVNC_SCALE="$1"; export SSVNC_SCALE + ;; + "-onelisten") SSVNC_LISTEN_ONCE=1; export SSVNC_LISTEN_ONCE + ;; + "-sendclipboard") VNCVIEWER_SEND_CLIPBOARD=1; export VNCVIEWER_SEND_CLIPBOARD + ;; + "-sendalways") VNCVIEWER_SEND_ALWAYS=1; export VNCVIEWER_SEND_ALWAYS + ;; + "-recvtext") shift; VNCVIEWER_RECV_TEXT="$1"; export VNCVIEWER_RECV_TEXT + ;; + "-escape") shift; VNCVIEWER_ESCAPE="$1"; export VNCVIEWER_ESCAPE + ;; + "-ssvnc_encodings") shift; VNCVIEWER_ENCODINGS="$1"; export VNCVIEWER_ENCODINGS + ;; + "-ssvnc_extra_opts") shift; VNCVIEWERCMD_EXTRA_OPTS="$1"; export VNCVIEWERCMD_EXTRA_OPTS + ;; + "-rfbversion") shift; VNCVIEWER_RFBVERSION="$1"; export VNCVIEWER_RFBVERSION + ;; + "-nobell") VNCVIEWER_NOBELL=1; export VNCVIEWER_NOBELL + ;; + "-popupfix") VNCVIEWER_POPUP_FIX=1; export VNCVIEWER_POPUP_FIX + ;; + "-realvnc4") VNCVIEWER_IS_REALVNC4=1; export VNCVIEWER_IS_REALVNC4 + ;; + "-h"*) help; exit 0 + ;; + "--h"*) help; exit 0 + ;; + *) break + ;; + esac + shift +done + +# maxconn is something we added to stunnel, this disables it: +if [ "X$SS_VNCVIEWER_NO_MAXCONN" != "X" ]; then + STUNNEL_EXTRA_OPTS=`echo "$STUNNEL_EXTRA_OPTS" | sed -e 's/maxconn/#maxconn/'` +elif echo "$VNCVIEWERCMD" | egrep -i '^(xmessage|sleep )' > /dev/null; then + STUNNEL_EXTRA_OPTS=`echo "$STUNNEL_EXTRA_OPTS" | sed -e 's/maxconn/#maxconn/'` +elif [ "X$reverse" != "X" ]; then + STUNNEL_EXTRA_OPTS=`echo "$STUNNEL_EXTRA_OPTS" | sed -e 's/maxconn/#maxconn/'` +else + # new way (our patches). other than the above, we set these: + if [ "X$SKIP_STUNNEL_ONCE" = "X" ]; then + STUNNEL_ONCE=1; export STUNNEL_ONCE + fi + if [ "X$SKIP_STUNNEL_MAX_CLIENTS" = "X" ]; then + STUNNEL_MAX_CLIENTS=1; export STUNNEL_MAX_CLIENTS + fi +fi +# always set this one: +if [ "X$SKIP_STUNNEL_NO_SYSLOG" = "X" ]; then + STUNNEL_NO_SYSLOG=1; export STUNNEL_NO_SYSLOG +fi + +# this is the -t ssh option (gives better keyboard response thru SSH tunnel) +targ="-t" +if [ "X$SS_VNCVIEWER_NO_T" != "X" ]; then + targ="" +fi + +# set the alpha blending env. hack: +if [ "X$gotalpha" = "X1" ]; then + VNCVIEWER_ALPHABLEND=1 + export VNCVIEWER_ALPHABLEND +else + NO_ALPHABLEND=1 + export NO_ALPHABLEND +fi + +if [ "X$reverse" != "X" ]; then + ssh_sleep=1800 + if [ "X$proxy" != "X" ]; then + # check proxy usage under reverse connection: + if [ "X$use_ssh" = "X" -a "X$use_sshssl" = "X" ]; then + echo "" + if echo "$proxy" | egrep -i "(repeater|vencrypt)://" > /dev/null; then + : + else + echo "*Warning*: SSL -listen and a Web proxy does not make sense." + sleep 2 + fi + elif echo "$proxy" | grep "," > /dev/null; then + : + else + echo "" + echo "*Warning*: -listen and a single proxy/gateway does not make sense." + sleep 2 + fi + + # we now try to PPROXY_LOOP_THYSELF, set this var to disable that. + #SSVNC_LISTEN_ONCE=1; export SSVNC_LISTEN_ONCE + fi +fi +if [ "X$ssh_cmd" = "X" ]; then + # if no remote ssh cmd, sleep a bit: + ssh_cmd="sleep $ssh_sleep" +fi + +# this should be a host:display: +# +orig="$1" +shift + +dL="-L" +if uname -sr | egrep 'SunOS 5\.[5-8]' > /dev/null; then + dL="-h" +fi + +have_uvnc_dsm_helper_showcert="" +if [ "X$showcert" = "X1" -a "X$SSVNC_USE_S_CLIENT" = "X" -a "X$reverse" = "X" ]; then + if type ultravnc_dsm_helper >/dev/null 2>&1; then + if ultravnc_dsm_helper -help 2>&1 | grep -w showcert >/dev/null; then + have_uvnc_dsm_helper_showcert=1 + fi + fi +fi +have_uvnc_dsm_helper_ipv6="" +if [ "X$SSVNC_ULTRA_DSM" != "X" ]; then + if type ultravnc_dsm_helper >/dev/null 2>&1; then + if ultravnc_dsm_helper -help 2>&1 | grep -iw ipv6 >/dev/null; then + have_uvnc_dsm_helper_ipv6=1 + fi + fi +fi + +rchk() { + # a kludge to set $RANDOM if we are not bash: + if [ "X$BASH_VERSION" = "X" ]; then + RANDOM=`date +%S``sh -c 'echo $$'``ps -elf 2>&1 | sum 2>&1 | awk '{print $1}'` + fi +} +rchk + +# a portable, but not absolutely safe, tmp file creator +mytmp() { + tf=$1 + if type mktemp > /dev/null 2>&1; then + # if we have mktemp(1), use it: + tf2="$tf.XXXXXX" + tf2=`mktemp "$tf2"` + if [ "X$tf2" != "X" -a -f "$tf2" ]; then + if [ "X$DEBUG_MKTEMP" != "X" ]; then + echo "mytmp-mktemp: $tf2" 1>&2 + fi + echo "$tf2" + return + fi + fi + # fallback to multiple cmds: + rm -rf "$tf" || exit 1 + if [ -d "$tf" ]; then + echo "tmp file $tf still exists as a directory." + exit 1 + elif [ $dL "$tf" ]; then + echo "tmp file $tf still exists as a symlink." + exit 1 + elif [ -f "$tf" ]; then + echo "tmp file $tf still exists." + exit 1 + fi + touch "$tf" || exit 1 + chmod 600 "$tf" || exit 1 + rchk + if [ "X$DEBUG_MKTEMP" != "X" ]; then + echo "mytmp-touch: $tf" 1>&2 + fi + echo "$tf" +} + +# set up special case of ultravnc single click III mode: +if echo "$proxy" | egrep "^sslrepeater://" > /dev/null; then + pstr=`echo "$proxy" | sed -e 's,sslrepeater://,,'` + pstr1=`echo "$pstr" | sed -e 's/+.*$//'` + pstr2=`echo "$pstr" | sed -e 's/^[^+]*+//'` + SSVNC_REPEATER="SCIII=$pstr2"; export SSVNC_REPEATER + orig=$pstr1 + echo + echo "reset: SSVNC_REPEATER=$SSVNC_REPEATER orig=$orig proxy=''" + proxy="" +fi +if echo "$proxy" | egrep "vencrypt://" > /dev/null; then + vtmp="/tmp/ss_handshake${RANDOM}.$$.txt" + vtmp=`mytmp "$vtmp"` + SSVNC_PREDIGESTED_HANDSHAKE="$vtmp" + export SSVNC_PREDIGESTED_HANDSHAKE + if [ "X$SSVNC_USE_OURS" = "X" ]; then + NEED_VENCRYPT_VIEWER_BRIDGE=1 + fi +fi +if [ "X$SSVNC_USE_OURS" = "X" ]; then + VNCVIEWERCMD_EXTRA_OPTS="" +fi + + +# check -ssh and -mycert/-verify conflict: +if [ "X$use_ssh" = "X1" -a "X$use_sshssl" = "X" ]; then + if [ "X$mycert" != "X" -o "X$verify" != "X" ]; then + echo "-mycert and -verify cannot be used in -ssh mode" + exit 1 + fi +fi + +# direct mode Vnc:// means show no warnings. +# direct mode vnc:// will show warnings. +if echo "$orig" | grep '^V[Nn][Cc]://' > /dev/null; then + SSVNC_NO_ENC_WARN=1 + export SSVNC_NO_ENC_WARN + orig=`echo "$orig" | sed -e 's/^...:/vnc:/'` +fi + +# interprest the pseudo URL proto:// strings: +if echo "$orig" | grep '^vnc://' > /dev/null; then + orig=`echo "$orig" | sed -e 's,vnc://,,'` + verify="" + mycert="" + crl="" + use_ssh="" + use_sshssl="" + direct_connect=1 +elif echo "$orig" | grep '^vncs://' > /dev/null; then + orig=`echo "$orig" | sed -e 's,vncs://,,'` +elif echo "$orig" | grep '^vncssl://' > /dev/null; then + orig=`echo "$orig" | sed -e 's,vncssl://,,'` +elif echo "$orig" | grep '^vnc+ssl://' > /dev/null; then + orig=`echo "$orig" | sed -e 's,vnc.ssl://,,'` +elif echo "$orig" | grep '^vncssh://' > /dev/null; then + orig=`echo "$orig" | sed -e 's,vncssh://,,'` + use_ssh=1 +elif echo "$orig" | grep '^vnc+ssh://' > /dev/null; then + orig=`echo "$orig" | sed -e 's,vnc.ssh://,,'` + use_ssh=1 +fi + +if [ "X$SSVNC_ULTRA_DSM" != "X" ]; then + verify="" + mycert="" + crl="" + use_ssh="" + use_sshssl="" + direct_connect=1 + if echo "$SSVNC_ULTRA_DSM" | grep 'noultra:' > /dev/null; then + SSVNC_NO_ULTRA_DSM=1; export SSVNC_NO_ULTRA_DSM + fi +fi + +# rsh mode is an internal/secret thing only I use. +rsh="" +if echo "$orig" | grep '^rsh://' > /dev/null; then + use_ssh=1 + rsh=1 + orig=`echo "$orig" | sed -e 's,rsh://,,'` +elif echo "$orig" | grep '^rsh:' > /dev/null; then + use_ssh=1 + rsh=1 + orig=`echo "$orig" | sed -e 's,rsh:,,'` +fi + +# play around with host:display port: +if echo "$orig" | grep ':[0-9][0-9]*$' > /dev/null; then + : +else + # add or assume :0 if no ':' + if [ "X$reverse" = "X" ]; then + orig="$orig:0" + elif [ "X$orig" = "X" ]; then + orig=":0" + fi +fi + +# extract host and disp number: + +# try to see if it is ipv6 address: +ipv6=0 +if echo "$orig" | grep '\[' > /dev/null; then + # ipv6 [fe80::219:dbff:fee5:3f92%eth1]:5900 + host=`echo "$orig" | sed -e 's/\].*$//' -e 's/\[//'` + disp=`echo "$orig" | sed -e 's/^.*\]://'` + ipv6=1 +elif echo "$orig" | grep ':..*:' > /dev/null; then + # ipv6 fe80::219:dbff:fee5:3f92%eth1:5900 + host=`echo "$orig" | sed -e 's/:[^:]*$//'` + disp=`echo "$orig" | sed -e 's/^.*://'` + ipv6=1 +else + # regular host:port + host=`echo "$orig" | awk -F: '{print $1}'` + disp=`echo "$orig" | awk -F: '{print $2}'` +fi + +if [ "X$reverse" != "X" -a "X$STUNNEL_LISTEN" = "X" -a "X$host" != "X" ]; then + STUNNEL_LISTEN=$host + echo "set STUNNEL_LISTEN=$STUNNEL_LISTEN" +fi + +if [ "X$host" = "X" ]; then + host=$localhost +fi + +if [ "X$SSVNC_IPV6" = "X0" ]; then + # disable checking for it. + ipv6=0 +#elif [ "X$reverse" != "X" -a "X$ipv6" = "X1" ]; then +# ipv6=0 +elif [ "X$ipv6" = "X1" ]; then + : +elif echo "$host" | grep '^[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*$' > /dev/null; then + : +else + # regular hostname, can't be sure... + gout="" + if type getent > /dev/null 2>/dev/null; then + gout=`getent hosts "$host" 2>/dev/null` + fi + if echo "$gout" | grep ':.*:' > /dev/null; then + if echo "$gout" | grep '^[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*$' > /dev/null; then + : + else + echo "ipv6: "`echo "$gout" | grep ':.*:' | head -n 1` + ipv6=1 + fi + fi + if [ "X$ipv6" = "X0" ]; then + hout="" + if type host > /dev/null 2>/dev/null; then + host "$host" >/dev/null 2>&1 + host "$host" >/dev/null 2>&1 + hout=`host "$host" 2>/dev/null` + fi + if echo "$hout" | grep -i 'has ipv6 address' > /dev/null; then + if echo "$hout" | grep -i 'has address' > /dev/null; then + : + else + echo "ipv6: "`echo "$hout" | grep -i 'has ipv6 address' | head -n 1` + ipv6=1 + fi + fi + fi + if [ "X$ipv6" = "X0" ]; then + dout="" + if type dig > /dev/null 2>/dev/null; then + dout=`dig -t any "$host" 2>/dev/null` + fi + if echo "$dout" | grep -i "^$host" | grep '[ ]AAAA[ ]' > /dev/null; then + if echo "$dout" | grep -i "^$host" | grep '[ ]A[ ]' > /dev/null; then + : + else + echo "ipv6: "`echo "$dout" | grep -i '[ ]AAAA[ ]' | head -n 1` + ipv6=1 + fi + fi + fi + if [ "X$ipv6" = "X0" ]; then + sout=`env LOOKUP="$host" \ + perl -e ' eval {use Socket}; exit 0 if $@; + eval {use Socket6}; exit 0 if $@; + @res = getaddrinfo($ENV{LOOKUP}, "daytime", AF_UNSPEC, SOCK_STREAM); + $ipv4 = 0; + $ipv6 = 0; + $ip6 = ""; + while (scalar(@res) >= 5) { + ($family, $socktype, $proto, $saddr, $canon, @res) = @res; + $ipv4 = 1 if $family == AF_INET; + $ipv6 = 1 if $family == AF_INET6; + if ($family == AF_INET6 && $ip6 eq "") { + my ($host, $port) = getnameinfo($saddr, NI_NUMERICHOST | NI_NUMERICSERV); + $ip6 = $host; + } + } + if (! $ipv4 && $ipv6) { + print "AF_INET6_ONLY: $ENV{LOOKUP}: $ip6\n"; + } + exit 0; + ' 2>/dev/null` + if echo "$sout" | grep AF_INET6_ONLY > /dev/null; then + echo "$sout" + ipv6=1 + fi + fi +fi +if [ "X$ipv6" = "X1" ]; then + echo "ipv6: addr=$host disp=$disp" +fi +if [ "X$disp" = "X" ]; then + port="" # probably -listen mode. +elif [ $disp -lt 0 ]; then + # negative means use |n| without question: + port=`expr 0 - $disp` +elif [ $disp -lt 200 ]; then + # less than 200 means 5900+n + if [ "X$reverse" = "X" ]; then + port=`expr $disp + 5900` + else + port=`expr $disp + 5500` + fi +else + # otherwise use the number directly, e.g. 443, 2345 + port=$disp +fi + +if [ "X$ipv6" = "X1" -a "X$direct_connect" = "X1" ]; then + if [ "X$proxy" = "X" -a "X$reverse" = "X" ]; then + if [ "X$SSVNC_ULTRA_DSM" != "X" -a "X$have_uvnc_dsm_helper_ipv6" = "X1" ]; then + : + elif [ "X$SSVNC_NO_IPV6_PROXY" != "X" ]; then + : + elif [ "X$SSVNC_NO_IPV6_PROXY_DIRECT" != "X" ]; then + : + elif [ "X$SSVNC_USE_OURS" = "X1" ]; then + # requires 1.0.27 and later ssvncviewer binary + : + else + proxy="ipv6://$host:$port" + echo "direct connect: set proxy=$proxy" + fi + fi +fi + +# (possibly) tell the vncviewer to only listen on lo: +if [ "X$reverse" != "X" ]; then + if [ "X$direct_connect" = "X" -o "X$proxy" != "X" -o "X$STUNNEL_LISTEN" != "X" ]; then + VNCVIEWER_LISTEN_LOCALHOST=1 + export VNCVIEWER_LISTEN_LOCALHOST + fi +fi + +# try to find an open listening port via netstat(1): +inuse="" +if uname | grep Linux > /dev/null; then + inuse=`netstat -ant | egrep 'LISTEN|WAIT|ESTABLISH|CLOSE' | awk '{print $4}' | sed 's/^.*://'` +elif uname | grep SunOS > /dev/null; then + inuse=`netstat -an -f inet -P tcp | egrep 'LISTEN|WAIT|ESTABLISH|CLOSE' | awk '{print $1}' | sed 's/^.*\.//'` +elif uname | egrep -i 'bsd|darwin' > /dev/null; then + inuse=`netstat -ant -f inet | egrep 'LISTEN|WAIT|ESTABLISH|CLOSE' | awk '{print $4}' | sed 's/^.*\.//'` +# add others... +fi + +# this is a crude attempt for unique ports tags, etc. +date_sec=`date +%S` + +# these are special cases of no vnc, e.g. sleep or xmessage. +# these are for using ssvnc as a general port redirector. +if echo "$VNCVIEWERCMD" | grep '^sleep[ ][ ]*[0-9][0-9]*' > /dev/null; then + if [ "X$SS_VNCVIEWER_LISTEN_PORT" = "X" ]; then + p=`echo "$VNCVIEWERCMD" | awk '{print $3}'` + if [ "X$p" != "X" ]; then + SS_VNCVIEWER_LISTEN_PORT=$p + fi + fi + p2=`echo "$VNCVIEWERCMD" | awk '{print $2}'` + VNCVIEWERCMD="eval sleep $p2; echo Local " +elif echo "$VNCVIEWERCMD" | grep '^xmessage[ ][ ]*[0-9][0-9]*' > /dev/null; then + if [ "X$SS_VNCVIEWER_LISTEN_PORT" = "X" ]; then + p=`echo "$VNCVIEWERCMD" | awk '{print $2}'` + SS_VNCVIEWER_LISTEN_PORT=$p + fi +fi + +# utility to find a free port to listen on. +findfree() { + try0=$1 + try=$try0 + use0="" + + if [ "X$SS_VNCVIEWER_LISTEN_PORT" != "X" ]; then + echo "$SS_VNCVIEWER_LISTEN_PORT" + return + fi + if [ $try -ge 6000 ]; then + fmax=`expr $try + 1000` + else + fmax=6000 + fi + + while [ $try -lt $fmax ] + do + if [ "X$inuse" = "X" ]; then + break + fi + if echo "$inuse" | grep -w $try > /dev/null; then + : + else + use0=$try + break + fi + try=`expr $try + 1` + done + if [ "X$use0" = "X" ]; then + use0=`expr $date_sec + $try0` + fi + + echo $use0 +} + +# utility for exiting; kills some helper processes, +# removes files, etc. +final() { + echo "" + if [ "X$tmp_cfg" != "X" ]; then + rm -f $tmp_cfg + fi + if [ "X$SS_VNCVIEWER_RM" != "X" ]; then + rm -f $SS_VNCVIEWER_RM 2>/dev/null + fi + if [ "X$tcert" != "X" ]; then + rm -f $tcert + fi + if [ "X$pssh" != "X" ]; then + echo "Terminating background ssh process" + echo kill -TERM "$pssh" + kill -TERM "$pssh" 2>/dev/null + sleep 1 + kill -KILL "$pssh" 2>/dev/null + pssh="" + fi + if [ "X$stunnel_pid" != "X" ]; then + echo "Terminating background stunnel process" + echo kill -TERM "$stunnel_pid" + kill -TERM "$stunnel_pid" 2>/dev/null + sleep 1 + kill -KILL "$stunnel_pid" 2>/dev/null + stunnel_pid="" + fi + if [ "X$dsm_pid" != "X" ]; then + echo "Terminating background ultravnc_dsm_helper process" + echo kill -TERM "$dsm_pid" + kill -TERM "$dsm_pid" 2>/dev/null + sleep 1 + kill -KILL "$dsm_pid" 2>/dev/null + stunnel_pid="" + fi + if [ "X$tail_pid" != "X" ]; then + kill -TERM $tail_pid + fi + if [ "X$tail_pid2" != "X" ]; then + kill -TERM $tail_pid2 + fi +} + +if [ "X$reverse" = "X" ]; then + # normal connections try 5930-5999: + if [ "X$showcert" = "X" ]; then + use=`findfree 5930` + else + # move away from normal place for (possibly many) -showcert + pstart=`date +%S` + pstart=`expr 6130 + $pstart + $pstart` + use=`findfree $pstart` + fi + if [ $use -ge 5900 ]; then + N=`expr $use - 5900` + else + N=$use + fi +else + # reverse connections: + p2=`expr $port + 30` + use=`findfree $p2` + if [ $use -ge 5500 ]; then + N=`expr $use - 5500` + else + N=$use + fi +fi + +# this is for my special use of ss_vncip -> vncip viewer. +if echo "$0" | grep vncip > /dev/null; then + VNCVIEWERCMD="$VNCIPCMD" +fi + +if echo "$VNCVIEWERCMD" | egrep -i '^(xmessage|sleep )' > /dev/null; then + : +elif [ "X$VNCVIEWERCMD_EXTRA_OPTS" != "X" ]; then + VNCVIEWERCMD="$VNCVIEWERCMD $VNCVIEWERCMD_EXTRA_OPTS" +fi + +# trick for the undocumented rsh://host:port method. +rsh_setup() { + if echo "$ssh_host" | grep '@' > /dev/null; then + ul=`echo "$ssh_host" | awk -F@ '{print $1}'` + ul="-l $ul" + ssh_host=`echo "$ssh_host" | awk -F@ '{print $2}'` + else + ul="" + fi + ssh_cmd=`echo "$ssh_cmd" | sed -e 's/ -localhost/ /g'` +} + +# trick for the undocumented rsh://host:port method. +rsh_viewer() { + trap "final" 0 2 15 + if [ "X$PORT" = "X" ]; then + exit 1 + elif [ $PORT -ge 5900 ]; then + vdpy=`expr $PORT - 5900` + else + vdpy=":$PORT" + fi + stty sane + echo "$VNCVIEWERCMD" "$@" $ssh_host:$vdpy + echo "" + $VNCVIEWERCMD "$@" $ssh_host:$vdpy + if [ $? != 0 ]; then + sleep 2 + $VNCVIEWERCMD "$@" $ssh_host:$vdpy + fi +} + +check_perl() { + if type "$1" > /dev/null 2>&1; then + : + elif [ ! -x "$1" ]; then + echo "" + echo "*******************************************************" + echo "** Problem finding the Perl command '$1': **" + echo "" + type "perl" + echo "" + echo "** Perhaps you need to install the Perl package. **" + echo "*******************************************************" + echo "" + sleep 5 + fi +} + +# this is the PPROXY tool. used only here for now... +pcode() { + tf=$1 + PPROXY_PROXY=$proxy; export PPROXY_PROXY + PPROXY_DEST="$host:$port"; export PPROXY_DEST + check_perl /usr/bin/perl + + cod='#!/usr/bin/perl + +# A hack to glue stunnel to a Web or SOCKS proxy, UltraVNC repeater for +# client connections. +# Also acts as a VeNCrypt bridge (by redirecting to stunnel.) + +use IO::Socket::INET; + +my $have_inet6 = ""; +eval "use IO::Socket::INET6;"; +$have_inet6 = 1 if $@ eq ""; + +#my $have_sock6 = ""; +#eval "use Socket; use Socket6;"; +#$have_sock6 = 1 if $@ eq ""; + +if (exists $ENV{PPROXY_LOOP_THYSELF}) { + # used for reverse vnc, run a repeating outer loop. + print STDERR "PPROXY_LOOP: $ENV{PPROXY_LOOP_THYSELF}\n"; + my $rm = $ENV{PPROXY_REMOVE}; + my $lp = $ENV{PPROXY_LOOP_THYSELF}; + delete $ENV{PPROXY_REMOVE}; + delete $ENV{PPROXY_LOOP_THYSELF}; + $ENV{PPROXY_LOOP_THYSELF_MASTER} = $$; + my $pid = $$; + my $dbg = 0; + my $c = 0; + use POSIX ":sys_wait_h"; + while (1) { + $pid = fork(); + last if ! defined $pid; + if ($pid eq "0") { + last; + } + $c++; + print STDERR "\nPPROXY_LOOP: pid=$$ child=$pid count=$c\n"; + while (1) { + waitpid(-1, WNOHANG); + fsleep(0.25); + if (! kill 0, $pid) { + print STDERR "PPROXY_LOOP: child=$pid gone.\n"; + last; + } + print STDERR "PPROXY_LOOP: child=$pid alive.\n" if $dbg; + if (! -f $lp) { + print STDERR "PPROXY_LOOP: flag file $lp gone, killing $pid\n"; + kill TERM, $pid; + fsleep(0.1); + wait; + last; + } + print STDERR "PPROXY_LOOP: file exists $lp\n" if $dbg; + } + last if ! -f $lp; + fsleep(0.25); + } + if ($pid ne "0") { + unlink($0) if $rm; + exit 0; + } +} + +if (exists $ENV{PPROXY_SLEEP} && $ENV{PPROXY_SLEEP} > 0) { + print STDERR "PPROXY_PID: $$\n"; + sleep $ENV{PPROXY_SLEEP}; +} + +foreach my $var (qw( + PPROXY_DEST + PPROXY_KILLPID + PPROXY_LISTEN + PPROXY_PROXY + PPROXY_REMOVE + PPROXY_REPEATER + PPROXY_REVERSE + PPROXY_SLEEP + PPROXY_SOCKS + PPROXY_VENCRYPT + PPROXY_VENCRYPT_VIEWER_BRIDGE + )) { + if (0 || $ENV{SS_DEBUG} || $ENV{SSVNC_VENCRYPT_DEBUG}) { + print STDERR "$var: $ENV{$var}\n"; + } +} + +if ($ENV{PPROXY_SOCKS} ne "" && $ENV{PPROXY_PROXY} !~ m,^socks5?://,i) { + if ($ENV{PPROXY_SOCKS} eq "5") { + $ENV{PPROXY_PROXY} = "socks5://$ENV{PPROXY_PROXY}"; + } else { + $ENV{PPROXY_PROXY} = "socks://$ENV{PPROXY_PROXY}"; + } +} + +my $rfbSecTypeAnonTls = 18; +my $rfbSecTypeVencrypt = 19; + +my $rfbVencryptPlain = 256; +my $rfbVencryptTlsNone = 257; +my $rfbVencryptTlsVnc = 258; +my $rfbVencryptTlsPlain = 259; +my $rfbVencryptX509None = 260; +my $rfbVencryptX509Vnc = 261; +my $rfbVencryptX509Plain = 262; + +my $handshake_file = ""; +if (exists $ENV{SSVNC_PREDIGESTED_HANDSHAKE}) { + $handshake_file = $ENV{SSVNC_PREDIGESTED_HANDSHAKE}; +} + +my $have_gettimeofday = 0; +eval "use Time::HiRes;"; +if ($@ eq "") { + $have_gettimeofday = 1; +} +sub gettime { + my $t = "0.0"; + if ($have_gettimeofday) { + $t = Time::HiRes::gettimeofday(); + } + return $t; +} + +my $listen_handle = ""; +my $sock = ""; +my $parent = $$; + +my $initial_data = ""; + +if ($ENV{PPROXY_VENCRYPT_VIEWER_BRIDGE}) { + my ($from, $to) = split(/,/, $ENV{PPROXY_VENCRYPT_VIEWER_BRIDGE}); + do_vencrypt_viewer_bridge($from, $to); + exit 0; +} + +my ($first, $second, $third) = split(/,/, $ENV{PPROXY_PROXY}, 3); +my ($mode_1st, $mode_2nd, $mode_3rd) = ("", "", ""); + +($first, $mode_1st) = url_parse($first); + +my ($proxy_host, $proxy_port) = ($first, ""); +if ($proxy_host =~ /^(.*):(\d+)$/) { + $proxy_host = $1; + $proxy_port = $2; +} +my $connect = $ENV{PPROXY_DEST}; + +if ($second ne "") { + ($second, $mode_2nd) = url_parse($second); +} + +if ($third ne "") { + ($third, $mode_3rd) = url_parse($third); +} + + +print STDERR "\n"; +print STDERR "PPROXY v0.4: a tool for Web, SOCKS, and UltraVNC proxies and for\n"; +print STDERR "PPROXY v0.4: IPv6 and VNC VeNCrypt bridging.\n"; +print STDERR "proxy_host: $proxy_host\n"; +print STDERR "proxy_port: $proxy_port\n"; +print STDERR "proxy_connect: $connect\n"; +print STDERR "pproxy_params: $ENV{PPROXY_PROXY}\n"; +print STDERR "pproxy_listen: $ENV{PPROXY_LISTEN}\n"; +print STDERR "pproxy_reverse: $ENV{PPROXY_REVERSE}\n"; +print STDERR "io_socket_inet6: $have_inet6\n"; +print STDERR "\n"; +if (! $have_inet6) { + print STDERR "PPROXY: To enable IPv6 connections, install the IO::Socket::INET6 perl module.\n\n"; +} + +if (1) { + print STDERR "pproxy 1st: $first\t- $mode_1st\n"; + print STDERR "pproxy 2nd: $second\t- $mode_2nd\n"; + print STDERR "pproxy 3rd: $third\t- $mode_3rd\n"; + print STDERR "\n"; +} + +sub pdie { + my $msg = shift; + kill_proxy_pids(); + die "$msg"; +} + +if ($ENV{PPROXY_REVERSE} ne "") { + my ($rhost, $rport) = ($ENV{PPROXY_REVERSE}, ""); + if ($rhost =~ /^(.*):(\d+)$/) { + $rhost = $1; + $rport = $2; + } + $rport = 5900 unless $rport; + my $emsg = ""; + $listen_handle = IO::Socket::INET->new( + PeerAddr => $rhost, + PeerPort => $rport, + Proto => "tcp" + ); + $emsg = $!; + if (! $listen_handle && $have_inet6) { + eval {$listen_handle = IO::Socket::INET6->new( + PeerAddr => $rhost, + PeerPort => $rport, + Proto => "tcp" + );}; + $emsg .= " / $!"; + } + if (! $listen_handle) { + pdie "pproxy: $emsg -- PPROXY_REVERSE\n"; + } + print STDERR "PPROXY_REVERSE: connected to $rhost $rport\n"; + +} elsif ($ENV{PPROXY_LISTEN} ne "") { + my $listen_sock = ""; + my $maxtry = 12; + my $sleep = 5; + my $p2 = ""; + my $emsg = ""; + for (my $i=0; $i < $maxtry; $i++) { + my ($if, $p) = ("", $ENV{PPROXY_LISTEN}); + if ($p =~ /^(.*):(\d+)$/) { + $if = $1; + $p = $2; + } + $p2 = "*:$p"; + if ($if eq "") { + $if = "localhost"; + } + print STDERR "pproxy interface: $if\n"; + + $emsg = ""; + if (($if eq "INADDR_ANY6" || $if eq "::") && $have_inet6) { + eval {$listen_sock = IO::Socket::INET6->new( + Listen => 2, + ReuseAddr => 1, + Domain => AF_INET6, + LocalAddr => "::", + LocalPort => $p, + Proto => "tcp" + );}; + $p2 = ":::$p"; + } elsif ($if =~ /^INADDR_ANY/) { + $listen_sock = IO::Socket::INET->new( + Listen => 2, + ReuseAddr => 1, + LocalPort => $p, + Proto => "tcp" + ); + } elsif (($if eq "INADDR_LOOPBACK6" || $if eq "::1") && $have_inet6) { + $p2 = "::1:$p"; + eval {$listen_sock = IO::Socket::INET6->new( + Listen => 2, + ReuseAddr => 1, + Domain => AF_INET6, + LocalAddr => "::1", + LocalPort => $p, + Proto => "tcp" + );}; + $p2 = "::1:$p"; + } else { + $p2 = "$if:$p"; + $listen_sock = IO::Socket::INET->new( + Listen => 2, + ReuseAddr => 1, + LocalAddr => $if, + LocalPort => $p, + Proto => "tcp" + ); + $emsg = $!; + + if (! $listen_sock && $have_inet6) { + print STDERR "PPROXY_LISTEN: retry with INET6\n"; + eval {$listen_sock = IO::Socket::INET6->new( + Listen => 2, + ReuseAddr => 1, + Domain => AF_INET6, + LocalAddr => $if, + LocalPort => $p, + Proto => "tcp" + );}; + $emsg .= " / $!"; + } + } + if (! $listen_sock) { + if ($i < $maxtry - 1) { + warn "pproxy: $emsg $!\n"; + warn "Could not listen on port $p2, retrying in $sleep seconds... (Ctrl-C to quit)\n"; + sleep $sleep; + } + } else { + last; + } + } + if (! $listen_sock) { + pdie "pproxy: $emsg -- PPROXY_LISTEN\n"; + } + print STDERR "pproxy: listening on $p2\n"; + my $ip; + ($listen_handle, $ip) = $listen_sock->accept(); + my $err = $!; + close $listen_sock; + if (! $listen_handle) { + pdie "pproxy: $err\n"; + } + + if ($ENV{PPROXY_LOOP_THYSELF_MASTER}) { + my $sml = $ENV{SSVNC_MULTIPLE_LISTEN}; + if ($sml ne "" && $sml ne "0") { + setpgrp(0, 0); + if (fork()) { + close $viewer_sock; + wait; + exit 0; + } + if (fork()) { + close $viewer_sock; + exit 0; + } + setpgrp(0, 0); + $parent = $$; + } + } +} + +$sock = IO::Socket::INET->new( + PeerAddr => $proxy_host, + PeerPort => $proxy_port, + Proto => "tcp" +); + +my $err = ""; + +if (! $sock && $have_inet6) { + $err = $!; + + print STDERR "pproxy: $!\n"; + + eval {$sock = IO::Socket::INET6->new( + PeerAddr => $proxy_host, + PeerPort => $proxy_port, + Proto => "tcp" + );}; + $err .= " / $!"; +} + +if (! $sock && ($proxy_host =~ /^::ffff:(\d+\.\d+\.\d+\.\d+)$/i || $proxy_host =~ /^::ffff:([\da-f]+:[\da-f]+)$/i)) { + print STDERR "pproxy: $!\n"; + my $ipv4_addr = $1; + if ($ipv4_addr =~ /:/) { + my ($a, $b) = split(/:/, $ipv4_addr); + $a = hex($a); + $b = hex($b); + $ipv4_addr = sprintf("%d.", ($a & 0xff00) >> 8); + $ipv4_addr .= sprintf("%d.", ($a & 0x00ff)); + $ipv4_addr .= sprintf("%d.", ($b & 0xff00) >> 8); + $ipv4_addr .= sprintf("%d", ($b & 0x00ff)); + } + + print STDERR "pproxy: re-trying with ipv4 addr: $ipv4_addr\n"; + + eval {$sock = IO::Socket::INET->new( + PeerAddr => $ipv4_addr, + PeerPort => $proxy_port, + Proto => "tcp" + );}; + $err .= " / $!"; +} + +if (! $sock) { + unlink($0) if $ENV{PPROXY_REMOVE}; + pdie "pproxy: $err\n"; +} + +unlink($0) if $ENV{PPROXY_REMOVE}; + +if ($ENV{PPROXY_PROXY} =~ /^vencrypt:/ && $ENV{PPROXY_VENCRYPT_REVERSE}) { + print STDERR "\nPPROXY: vencrypt+reverse: swapping listen socket with connect socket.\n"; + my $tmp_swap = $sock; + $sock = $listen_handle; + $listen_handle = $tmp_swap; +} + +$cur_proxy = $first; +setmode($mode_1st); + +if ($second ne "") { + connection($second, 1); + + setmode($mode_2nd); + $cur_proxy = $second; + + if ($third ne "") { + connection($third, 2); + setmode($mode_3rd); + $cur_proxy = $third; + connection($connect, 3); + } else { + connection($connect, 2); + } +} else { + connection($connect, 1); +} + +sub kill_proxy_pids() { + if ($ENV{PPROXY_VENCRYPT_VIEWER_BRIDGE}) { + return; + } + if ($ENV{PPROXY_KILLPID}) { + foreach my $p (split(/,/, $ENV{PPROXY_KILLPID})) { + if ($p =~ /^(\+|-)/) { + $p = $parent + $p; + } + print STDERR "kill TERM, $p (PPROXY_KILLPID)\n"; + kill "TERM", $p; + } + } +} + +sub xfer { + my($in, $out) = @_; + $RIN = $WIN = $EIN = ""; + $ROUT = ""; + vec($RIN, fileno($in), 1) = 1; + vec($WIN, fileno($in), 1) = 1; + $EIN = $RIN | $WIN; + + while (1) { + my $nf = 0; + while (! $nf) { + $nf = select($ROUT=$RIN, undef, undef, undef); + } + my $len = sysread($in, $buf, 8192); + if (! defined($len)) { + next if $! =~ /^Interrupted/; + print STDERR "pproxy[$$]: $!\n"; + last; + } elsif ($len == 0) { + print STDERR "pproxy[$$]: Input is EOF.\n"; + last; + } + my $offset = 0; + my $quit = 0; + while ($len) { + my $written = syswrite($out, $buf, $len, $offset); + if (! defined $written) { + print STDERR "pproxy[$$]: Output is EOF. $!\n"; + $quit = 1; + last; + } + $len -= $written; + $offset += $written; + } + last if $quit; + } + close($out); + close($in); + print STDERR "pproxy[$$]: finished xfer.\n"; +} + +sub handler { + print STDERR "pproxy[$$]: got SIGTERM.\n"; + close $listen_handle if $listen_handle; + close $sock if $sock; + exit; +} + +sub xfer_both { + $child = fork; + + if (! defined $child) { + kill_proxy_pids(); + exit 1; + } + + $SIG{TERM} = "handler"; + + if ($child) { + if ($listen_handle) { + print STDERR "pproxy parent[$$] listen_handle -> socket\n"; + xfer($listen_handle, $sock); + } else { + print STDERR "pproxy parent[$$] STDIN -> socket\n"; + xfer(STDIN, $sock); + } + select(undef, undef, undef, 0.25); + if (kill 0, $child) { + select(undef, undef, undef, 0.9); + if (kill 0, $child) { + print STDERR "pproxy[$$]: kill TERM child $child\n"; + kill "TERM", $child; + } else { + print STDERR "pproxy[$$]: child $child gone.\n"; + } + } + } else { + select(undef, undef, undef, 0.05); + if ($listen_handle) { + print STDERR "pproxy child [$$] socket -> listen_handle\n"; + if ($initial_data ne "") { + my $len = length $initial_data; + print STDERR "pproxy child [$$] sending initial_data, length $len\n\n"; + syswrite($listen_handle, $initial_data, $len); + } else { + print STDERR "\n"; + } + xfer($sock, $listen_handle); + } else { + print STDERR "pproxy child [$$] socket -> STDOUT\n"; + if ($initial_data ne "") { + my $len = length $initial_data; + print STDERR "pproxy child [$$] sending initial_data, length $len\n\n"; + syswrite(STDOUT, $initial_data, $len); + } else { + print STDERR "\n"; + } + xfer($sock, STDOUT); + } + select(undef, undef, undef, 0.25); + if (kill 0, $parent) { + select(undef, undef, undef, 0.8); + if (kill 0, $parent) { + print STDERR "pproxy[$$]: kill TERM parent $parent\n"; + kill "TERM", $parent; + } else { + print STDERR "pproxy[$$]: parent $parent gone.\n"; + } + } + } + + kill_proxy_pids(); +} + +xfer_both(); + +exit; + +sub fsleep { + select(undef, undef, undef, shift); +} + +sub url_parse { + my $hostport = shift; + my $mode = "http"; + if ($hostport =~ m,^socks4?://(\S*)$,i) { + $mode = "socks4"; + $hostport = $1; + } elsif ($hostport =~ m,^socks5://(\S*)$,i) { + $mode = "socks5"; + $hostport = $1; + } elsif ($hostport =~ m,^https?://(\S*)$,i) { + $mode = "http"; + $hostport = $1; + } elsif ($hostport =~ m,^ipv6://(\S*)$,i) { + $mode = "ipv6"; + $hostport = $1; + } elsif ($hostport =~ m,^repeater://(\S*)\+(\S*)$,i) { + # ultravnc repeater proxy. + $hostport = $1; + $mode = "repeater:$2"; + if ($hostport !~ /:\d+$/) { + $hostport .= ":5900"; + } + } elsif ($hostport =~ m,^vencrypt://(\S*)$,i) { + # vencrypt handshake. + $hostport = $1; + my $m = "connect"; + if ($hostpost =~ /^(\S+)\+(\S+)$/) { + $hostport = $1; + $mode = $2; + } + $mode = "vencrypt:$m"; + if ($hostport !~ /:\d+$/) { + $hostport .= ":5900"; + } + } + return ($hostport, $mode); +} + +sub setmode { + my $mode = shift; + $ENV{PPROXY_REPEATER} = ""; + $ENV{PPROXY_VENCRYPT} = ""; + if ($mode =~ /^socks/) { + if ($mode =~ /^socks5/) { + $ENV{PPROXY_SOCKS} = 5; + } else { + $ENV{PPROXY_SOCKS} = 1; + } + } elsif ($mode =~ /^ipv6/i) { + $ENV{PPROXY_SOCKS} = 0; + } elsif ($mode =~ /^repeater:(.*)/) { + $ENV{PPROXY_REPEATER} = $1; + $ENV{PPROXY_SOCKS} = ""; + } elsif ($mode =~ /^vencrypt:(.*)/) { + $ENV{PPROXY_VENCRYPT} = $1; + $ENV{PPROXY_SOCKS} = ""; + } else { + $ENV{PPROXY_SOCKS} = ""; + } +} + +sub connection { + my ($CONNECT, $w) = @_; + + my $con = ""; + my $msg = ""; + + if ($ENV{PPROXY_SOCKS} eq "5") { + # SOCKS5 + my ($h, $p) = ($CONNECT, ""); + if ($h =~ /^(.*):(\d+)$/) { + $h = $1; + $p = $2; + } + $con .= pack("C", 0x05); + $con .= pack("C", 0x01); + $con .= pack("C", 0x00); + + $msg = "SOCKS5 via $cur_proxy to $h:$p\n\n"; + print STDERR "proxy_request$w: $msg"; + + syswrite($sock, $con, length($con)); + + my ($n1, $n2, $n3, $n4, $n5, $n6); + my ($r1, $r2, $r3, $r4, $r5, $r6); + my ($s1, $s2, $s3, $s4, $s5, $s6); + + $n1 = sysread($sock, $r1, 1); + $n2 = sysread($sock, $r2, 1); + + $s1 = unpack("C", $r1); + $s2 = unpack("C", $r2); + if ($s1 != 0x05 || $s2 != 0x00) { + print STDERR "SOCKS5 fail s1=$s1 s2=$s2 n1=$n1 n2=$n2\n"; + close $sock; + exit(1); + } + + $con = ""; + $con .= pack("C", 0x05); + $con .= pack("C", 0x01); + $con .= pack("C", 0x00); + $con .= pack("C", 0x03); + $con .= pack("C", length($h)); + $con .= $h; + $con .= pack("C", $p >> 8); + $con .= pack("C", $p & 0xff); + + syswrite($sock, $con, length($con)); + + $n1 = sysread($sock, $r1, 1); + $n2 = sysread($sock, $r2, 1); + $n3 = sysread($sock, $r3, 1); + $n4 = sysread($sock, $r4, 1); + $s1 = unpack("C", $r1); + $s2 = unpack("C", $r2); + $s3 = unpack("C", $r3); + $s4 = unpack("C", $r4); + + if ($s4 == 0x1) { + sysread($sock, $r5, 4 + 2); + } elsif ($s4 == 0x3) { + sysread($sock, $r5, 1); + $s5 = unpack("C", $r5); + sysread($sock, $r6, $s5 + 2); + } elsif ($s4 == 0x4) { + sysread($sock, $r5, 16 + 2); + } + + if ($s1 != 0x5 || $s2 != 0x0 || $s3 != 0x0) { + print STDERR "SOCKS5 failed: s1=$s1 s2=$s2 s3=$s3 s4=$s4 n1=$n1 n2=$n2 n3=$n3 n4=$n4\n"; + close $sock; + exit(1); + } + + } elsif ($ENV{PPROXY_SOCKS} eq "1") { + # SOCKS4 SOCKS4a + my ($h, $p) = ($CONNECT, ""); + if ($h =~ /^(.*):(\d+)$/) { + $h = $1; + $p = $2; + } + $con .= pack("C", 0x04); + $con .= pack("C", 0x01); + $con .= pack("n", $p); + + my $SOCKS_4a = 0; + if ($h eq "localhost" || $h eq "127.0.0.1") { + $con .= pack("C", 127); + $con .= pack("C", 0); + $con .= pack("C", 0); + $con .= pack("C", 1); + } elsif ($h =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) { + $con .= pack("C", $1); + $con .= pack("C", $2); + $con .= pack("C", $3); + $con .= pack("C", $4); + } else { + $con .= pack("C", 0); + $con .= pack("C", 0); + $con .= pack("C", 0); + $con .= pack("C", 3); + $SOCKS_4a = 1; + } + + $con .= "nobody"; + $con .= pack("C", 0); + + $msg = "SOCKS4 via $cur_proxy to $h:$p\n\n"; + if ($SOCKS_4a) { + $con .= $h; + $con .= pack("C", 0); + $msg =~ s/SOCKS4/SOCKS4a/; + } + print STDERR "proxy_request$w: $msg"; + syswrite($sock, $con, length($con)); + + my $ok = 1; + for (my $i = 0; $i < 8; $i++) { + my $c; + sysread($sock, $c, 1); + my $s = unpack("C", $c); + if ($i == 0) { + $ok = 0 if $s != 0x0; + } elsif ($i == 1) { + $ok = 0 if $s != 0x5a; + } + } + if (! $ok) { + print STDERR "SOCKS4 failed.\n"; + close $sock; + exit(1); + } + } elsif ($ENV{PPROXY_SOCKS} eq "0") { + # hack for ipv6 "proxy", nothing to do, assume INET6 call worked. + ; + } elsif ($ENV{PPROXY_REPEATER} ne "") { + my $rep = $ENV{PPROXY_REPEATER}; + print STDERR "repeater: $rep\n"; + $rep .= pack("x") x 250; + syswrite($sock, $rep, 250); + + my $rfb = ""; + + my $ok = 1; + for (my $i = 0; $i < 12; $i++) { + my $c; + last if $ENV{PPROXY_GENERIC_REPEATER}; + sysread($sock, $c, 1); + print STDERR $c; + $rfb .= $c; + } + if ($rfb ne "" && $rfb !~ /^RFB 000\.000/) { + $initial_data = $rfb; + $rfb =~ s/\n//g; + print STDERR "detected non-UltraVNC repeater; forwarding \"$rfb\"\nlength: ", length($initial_data), "\n"; + } + } elsif ($ENV{PPROXY_VENCRYPT} ne "") { + my $vencrypt = $ENV{PPROXY_VENCRYPT}; + vencrypt_dialog($vencrypt); + + } else { + # Web Proxy: + $con = "CONNECT $CONNECT HTTP/1.1\r\n"; + $con .= "Host: $CONNECT\r\n"; + $con .= "Connection: close\r\n\r\n"; + $msg = $con; + + print STDERR "proxy_request$w: via $cur_proxy:\n$msg"; + syswrite($sock, $con, length($con)); + + my $rep = ""; + my $n = 0; + while ($rep !~ /\r\n\r\n/ && $n < 30000) { + my $c; + sysread($sock, $c, 1); + print STDERR $c; + $rep .= $c; + $n++; + } + if ($rep !~ m,HTTP/.* 200,) { + print STDERR "HTTP CONNECT failed.\n"; + close $sock; + exit(1); + } + } +} + +sub vdie { + append_handshake("done\n"); + close $sock; + kill_proxy_pids(); + exit(1); +} + +sub anontls_handshake { + my ($vmode, $db) = @_; + + print STDERR "\nPPROXY: Doing ANONTLS Handshake\n"; + + my $psec = pack("C", $rfbSecTypeAnonTls); + syswrite($sock, $psec, 1); + + append_handshake("done\n"); +} + +sub vencrypt_handshake { + + my ($vmode, $db) = @_; + + print STDERR "\nPPROXY: Doing VeNCrypt Handshake\n"; + + my $psec = pack("C", $rfbSecTypeVencrypt); + + if (exists $ENV{SSVNC_TEST_SEC_TYPE}) { + my $fake = $ENV{SSVNC_TEST_SEC_TYPE}; + print STDERR "PPROXY: sending sec-type: $fake\n"; + $psec = pack("C", $fake); + } + + syswrite($sock, $psec, 1); + + my $vmajor; + my $vminor; + sysread($sock, $vmajor, 1); + sysread($sock, $vminor, 1); + + vdie if $vmajor eq "" || $vminor eq ""; + + $vmajor = unpack("C", $vmajor); + $vminor = unpack("C", $vminor); + print STDERR "server vencrypt version $vmajor.$vminor\n" if $db; + + if (exists $ENV{SSVNC_TEST_SEC_TYPE}) { + print STDERR "PPROXY: continuing on in test mode.\n"; + } else { + vdie if $vmajor ne 0; + vdie if $vminor < 2; + } + + $vmajor = pack("C", 0); + $vminor = pack("C", 2); + append_handshake("subversion=0.2\n"); + + syswrite($sock, $vmajor, 1); + syswrite($sock, $vminor, 1); + + my $result; + sysread($sock, $result, 1); + print STDERR "result empty\n" if $db && $result eq ""; + + vdie if $result eq ""; + $result = unpack("C", $result); + print STDERR "result=$result\n" if $db; + + vdie if $result ne 0; + + my $nsubtypes; + sysread($sock, $nsubtypes, 1); + + vdie if $nsubtypes eq ""; + $nsubtypes = unpack("C", $nsubtypes); + print STDERR "nsubtypes=$nsubtypes\n" if $db; + + my %subtypes; + + for (my $i = 0; $i < $nsubtypes; $i++) { + my $subtype = ""; + sysread($sock, $subtype, 4); + vdie if length($subtype) != 4; + + # XXX fix 64bit. + $subtype = unpack("N", $subtype); + print STDERR "subtype: $subtype\n" if $db; + $subtypes{$subtype} = 1; + append_handshake("sst$i=$subtype\n"); + } + + my $subtype = 0; + if (exists $subtypes{$rfbVencryptX509None}) { + $subtype = $rfbVencryptX509None; + print STDERR "selected rfbVencryptX509None\n" if $db; + } elsif (exists $subtypes{$rfbVencryptX509Vnc}) { + $subtype = $rfbVencryptX509Vnc; + print STDERR "selected rfbVencryptX509Vnc\n" if $db; + } elsif (exists $subtypes{$rfbVencryptX509Plain}) { + $subtype = $rfbVencryptX509Plain; + print STDERR "selected rfbVencryptX509Plain\n" if $db; + } elsif (exists $subtypes{$rfbVencryptTlsNone}) { + $subtype = $rfbVencryptTlsNone; + print STDERR "selected rfbVencryptTlsNone\n" if $db; + } elsif (exists $subtypes{$rfbVencryptTlsVnc}) { + $subtype = $rfbVencryptTlsVnc; + print STDERR "selected rfbVencryptTlsVnc\n" if $db; + } elsif (exists $subtypes{$rfbVencryptTlsPlain}) { + $subtype = $rfbVencryptTlsPlain; + print STDERR "selected rfbVencryptTlsPlain\n" if $db; + } + + if (exists $ENV{SSVNC_TEST_SEC_SUBTYPE}) { + my $fake = $ENV{SSVNC_TEST_SEC_SUBTYPE}; + print STDERR "PPROXY: sending sec-subtype: $fake\n"; + $subtype = $fake; + } + + append_handshake("subtype=$subtype\n"); + + my $pst = pack("N", $subtype); + syswrite($sock, $pst, 4); + + if (exists $ENV{SSVNC_TEST_SEC_SUBTYPE}) { + print STDERR "PPROXY: continuing on in test mode.\n"; + } else { + vdie if $subtype == 0; + } + + my $ok; + sysread($sock, $ok, 1); + $ok = unpack("C", $ok); + print STDERR "ok=$ok\n" if $db; + + append_handshake("done\n"); + + vdie if $ok == 0; +} + +sub vencrypt_dialog { + my $vmode = shift; + my $db = 0; + + $db = 1 if exists $ENV{SS_DEBUG}; + $db = 1 if exists $ENV{SSVNC_VENCRYPT_DEBUG}; + + append_handshake("mode=$vmode\n"); + + my $server_rfb = ""; + #syswrite($sock, $rep, 250); + for (my $i = 0; $i < 12; $i++) { + my $c; + sysread($sock, $c, 1); + $server_rfb .= $c; + print STDERR $c; + } + print STDERR "server_rfb: $server_rfb\n" if $db; + append_handshake("server=$server_rfb"); + + my $minor = ""; + if ($server_rfb =~ /^RFB 003\.(\d+)/) { + $minor = $1; + } else { + vdie; + } + my $viewer_rfb = "RFB 003.008\n"; + if ($minor < 7) { + vdie; + } elsif ($minor == 7) { + $viewer_rfb = "RFB 003.007\n"; + } + my $nsec; + my $t1 = gettime(); + my $t0 = gettime(); + + syswrite($sock, $viewer_rfb, 12); + sysread($sock, $nsec, 1); + + $t1 = gettime(); + $t1 = sprintf("%.6f", $t1 - $t0); + + append_handshake("viewer=$viewer_rfb"); + append_handshake("latency=$t1\n"); + + vdie if $nsec eq ""; + + $nsec = unpack("C", $nsec); + + print STDERR "nsec: $nsec\n" if $db; + vdie if $nsec eq 0 || $nsec > 100; + + my %sectypes = (); + + for (my $i = 0; $i < $nsec; $i++) { + my $sec; + sysread($sock, $sec, 1); + vdie if $sec eq ""; + $sec = unpack("C", $sec); + print STDERR "sec: $sec\n" if $db; + $sectypes{$sec} = 1; + } + + if (exists $sectypes{$rfbSecTypeVencrypt}) { + print STDERR "found rfbSecTypeVencrypt\n" if $db; + append_handshake("sectype=$rfbSecTypeVencrypt\n"); + vencrypt_handshake($vmode, $db); + } elsif (exists $sectypes{$rfbSecTypeAnonTls}) { + print STDERR "found rfbSecTypeAnonTls\n" if $db; + append_handshake("sectype=$rfbSecTypeAnonTls\n"); + anontls_handshake($vmode, $db); + } else { + print STDERR "No supported sec-type found\n" if $db; + vdie; + } +} + +sub append_handshake { + my $str = shift; + if ($handshake_file) { + if (open(HSF, ">>$handshake_file")) { + print HSF $str; + close HSF; + } + } +} + +sub do_vencrypt_viewer_bridge { + my ($listen, $connect) = @_; + print STDERR "\npproxy: starting vencrypt_viewer_bridge[$$]: $listen \-> $connect\n"; + my $db = 0; + my $backwards = 0; + if ($listen < 0) { + $backwards = 1; + $listen = -$listen; + } + if ($handshake_file eq "") { + die "pproxy: vencrypt_viewer_bridge[$$]: no SSVNC_PREDIGESTED_HANDSHAKE\n"; + } + my $listen_sock; + my $maxtry = 12; + my $sleep = 5; + for (my $i=0; $i < $maxtry; $i++) { + $listen_sock = IO::Socket::INET->new( + Listen => 2, + ReuseAddr => 1, + LocalAddr => "127.0.0.1", + LocalPort => $listen, + Proto => "tcp" + ); + if (! $listen_sock) { + if ($i < $maxtry - 1) { + warn "pproxy: vencrypt_viewer_bridge[$$]: $!\n"; + warn "Could not listen on port $listen, retrying in $sleep seconds... (Ctrl-C to quit)\n"; + sleep $sleep; + } + } else { + last; + } + } + if (! $listen_sock) { + die "pproxy: vencrypt_viewer_bridge[$$]: $!\n"; + } + print STDERR "pproxy: vencrypt_viewer_bridge[$$]: listening on port $listen\n\n"; + my ($viewer_sock, $ip) = $listen_sock->accept(); + my $err = $!; + close $listen_sock; + if (! $viewer_sock) { + die "pproxy: vencrypt_viewer_bridge[$$]: $err\n"; + } + if ($ENV{PPROXY_LOOP_THYSELF_MASTER}) { + my $sml = $ENV{SSVNC_MULTIPLE_LISTEN}; + if ($sml ne "" && $sml ne "0") { + setpgrp(0, 0); + if (fork()) { + close $viewer_sock; + wait; + exit 0; + } + if (fork()) { + close $viewer_sock; + exit 0; + } + setpgrp(0, 0); + $parent = $$; + } + } + print STDERR "vencrypt_viewer_bridge[$$]: viewer_sock $viewer_sock\n" if $db; + + print STDERR "pproxy: vencrypt_viewer_bridge[$$]: connecting to 127.0.0.1:$connect\n"; + my $server_sock = IO::Socket::INET->new( + PeerAddr => "127.0.0.1", + PeerPort => $connect, + Proto => "tcp" + ); + print STDERR "vencrypt_viewer_bridge[$$]: server_sock $server_sock\n" if $db; + if (! $server_sock) { + my $err = $!; + die "pproxy: vencrypt_viewer_bridge[$$]: $err\n"; + } + + if ($backwards) { + print STDERR "vencrypt_viewer_bridge[$$]: reversing roles of viewer and server.\n"; + my $t = $viewer_sock; + $viewer_sock = $server_sock; + $server_sock = $t; + } + + my %hs = (); + my $dt = 0.2; + my $slept = 0.0; + while ($slept < 20.0) { + select(undef, undef, undef, $dt); + $slept += $dt; + if (-f $handshake_file && open(HSF, "<$handshake_file")) { + my $done = 0; + %hs = (); + my $str = ""; + while () { + print STDERR "vencrypt_viewer_bridge[$$]: $_" if $ENV{VENCRYPT_VIEWER_BRIDGE_DEBUG}; + $str .= "vencrypt_viewer_bridge[$$]: $_"; + chomp; + if ($_ eq "done") { + $done = 1; + } else { + my ($k, $v) = split(/=/, $_, 2); + if ($k ne "" && $v ne "") { + $hs{$k} = $v; + } + } + } + close HSF; + if ($done) { + print STDERR "\n" . $str; + last; + } + } + } + if (! exists $hs{server}) { + $hs{server} = "RFB 003.008"; + } + if (! exists $hs{sectype}) { + unlink($handshake_file); + die "pproxy: vencrypt_viewer_bridge[$$]: no sectype.\n"; + } + syswrite($viewer_sock, "$hs{server}\n", length($hs{server}) + 1); + my $viewer_rfb = ""; + for (my $i = 0; $i < 12; $i++) { + my $c; + sysread($viewer_sock, $c, 1); + $viewer_rfb .= $c; + print STDERR $c; + } + my $viewer_major = 3; + my $viewer_minor = 8; + if ($viewer_rfb =~ /RFB (\d+)\.(\d+)/) { + $viewer_major = $1; + $viewer_minor = $2; + } + my $u0 = pack("C", 0); + my $u1 = pack("C", 1); + my $u2 = pack("C", 2); + if ($hs{sectype} == $rfbSecTypeAnonTls) { + unlink($handshake_file); + print STDERR "\npproxy: vencrypt_viewer_bridge[$$]: rfbSecTypeAnonTls\n"; + if ($viewer_major > 3 || $viewer_minor >= 7) { + ; # setup ok, proceed to xfer. + } else { + print STDERR "pproxy: vencrypt_viewer_bridge[$$]: faking RFB version 3.3 to viewer.\n"; + my $n; + sysread($server_sock, $n, 1); + $n = unpack("C", $n); + if ($n == 0) { + die "pproxy: vencrypt_viewer_bridge[$$]: nsectypes == $n.\n"; + } + my %types; + for (my $i = 0; $i < $n; $i++) { + my $t; + sysread($server_sock, $t, 1); + $t = unpack("C", $t); + $types{$t} = 1; + } + my $use = 1; # None + if (exists $types{1}) { + $use = 1; # None + } elsif (exists $types{2}) { + $use = 2; # VncAuth + } else { + die "pproxy: vencrypt_viewer_bridge[$$]: no valid sectypes" . join(",", keys %types) . "\n"; + } + + # send 4 bytes sectype to viewer: + # (note this should be MSB, network byte order...) + my $up = pack("C", $use); + syswrite($viewer_sock, $u0, 1); + syswrite($viewer_sock, $u0, 1); + syswrite($viewer_sock, $u0, 1); + syswrite($viewer_sock, $up, 1); + # and tell server the one we selected: + syswrite($server_sock, $up, 1); + if ($use == 1) { + # even None has security result, so read it here and discard it. + my $sr = ""; + sysread($server_sock, $sr, 4); + } + } + } elsif ($hs{sectype} == $rfbSecTypeVencrypt) { + print STDERR "\npproxy: vencrypt_viewer_bridge[$$]: rfbSecTypeVencrypt\n"; + if (! exists $hs{subtype}) { + unlink($handshake_file); + die "pproxy: vencrypt_viewer_bridge[$$]: no subtype.\n"; + } + my $fake_type = "None"; + my $plain = 0; + my $sub_type = $hs{subtype}; + if ($sub_type == $rfbVencryptTlsNone) { + $fake_type = "None"; + } elsif ($sub_type == $rfbVencryptTlsVnc) { + $fake_type = "VncAuth"; + } elsif ($sub_type == $rfbVencryptTlsPlain) { + $fake_type = "None"; + $plain = 1; + } elsif ($sub_type == $rfbVencryptX509None) { + $fake_type = "None"; + } elsif ($sub_type == $rfbVencryptX509Vnc) { + $fake_type = "VncAuth"; + } elsif ($sub_type == $rfbVencryptX509Plain) { + $fake_type = "None"; + $plain = 1; + } + if ($plain) { + if (!open(W, ">$handshake_file")) { + unlink($handshake_file); + die "pproxy: vencrypt_viewer_bridge[$$]: $handshake_file $!\n"; + } + print W <<"END"; + + proc print_out {} { + global user pass env + + if [info exists env(SSVNC_UP_DEBUG)] { + toplevel .b + button .b.b -text "user=\$user pass=\$pass" -command {destroy .b} + pack .b.b + update + tkwait window .b + } + + if [info exists env(SSVNC_UP_FILE)] { + set fh "" + catch {set fh [open \$env(SSVNC_UP_FILE) w]} + if {\$fh != ""} { + puts \$fh user=\$user\\npass=\$pass + flush \$fh + close \$fh + return + } + } + puts stdout user=\$user\\npass=\$pass + flush stdout + } + + proc center_win {w} { + update + set W [winfo screenwidth \$w] + set W [expr \$W + 1] + wm geometry \$w +\$W+0 + update + set x [expr [winfo screenwidth \$w]/2 - [winfo width \$w]/2] + set y [expr [winfo screenheight \$w]/2 - [winfo height \$w]/2] + + wm geometry \$w +\$x+\$y + wm deiconify \$w + update + } + + wm withdraw . + + global env + set up {} + if [info exists env(SSVNC_UNIXPW)] { + set rm 0 + set up \$env(SSVNC_UNIXPW) + if [regexp {^rm:} \$up] { + set rm 1 + regsub {^rm:} \$up {} up + } + if [file exists \$up] { + set fh "" + set f \$up + catch {set fh [open \$up r]} + if {\$fh != ""} { + gets \$fh u + gets \$fh p + close \$fh + set up "\$u@\$p" + } + if {\$rm} { + catch {file delete \$f} + } + } + } elseif [info exists env(SSVNC_VENCRYPT_USERPASS)] { + set up \$env(SSVNC_VENCRYPT_USERPASS) + } + #puts stderr up=\$up + if {\$up != ""} { + if [regexp {@} \$up] { + global user pass + set user \$up + set pass \$up + regsub {@.*\$} \$user "" user + regsub {^[^@]*@} \$pass "" pass + print_out + exit + } + } + + wm title . {VeNCrypt Viewer Bridge User/Pass} + + set user {} + set pass {} + + label .l -text {SSVNC VeNCrypt Viewer Bridge} + + frame .f0 + frame .f0.fL + label .f0.fL.la -text {Username: } + label .f0.fL.lb -text {Password: } + + pack .f0.fL.la .f0.fL.lb -side top + + frame .f0.fR + entry .f0.fR.ea -width 24 -textvariable user + entry .f0.fR.eb -width 24 -textvariable pass -show * + + pack .f0.fR.ea .f0.fR.eb -side top -fill x + + pack .f0.fL -side left + pack .f0.fR -side right -expand 1 -fill x + + button .no -text Cancel -command {destroy .} + button .ok -text Done -command {print_out; destroy .} + + center_win . + pack .l .f0 .no .ok -side top -fill x + update + wm deiconify . + + bind .f0.fR.ea {focus .f0.fR.eb} + bind .f0.fR.eb {print_out; destroy .} + focus .f0.fR.ea + + wm resizable . 1 0 + wm minsize . [winfo reqwidth .] [winfo reqheight .] +END + close W; + + #system("cat $handshake_file"); + my $w = "wish"; + if ($ENV{WISH}) { + $w = $ENV{WISH}; + } + print STDERR "pproxy: vencrypt_viewer_bridge[$$]: prompt VencryptPlain user and passwd.\n"; + my $res = ""; + if (`uname` =~ /Darwin/) { + my $mtmp = `mktemp /tmp/hsup.XXXXXX`; + chomp $mtmp; + system("env SSVNC_UP_FILE=$mtmp $w $handshake_file"); + $res = `cat $mtmp`; + unlink $mtmp; + } else { + $res = `$w $handshake_file`; + } + my $user = ""; + my $pass = ""; + if ($res =~ /user=(\S*)/) { + $user = $1; + } + if ($res =~ /pass=(\S*)/) { + $pass = $1; + } + print STDERR "pproxy: vencrypt_viewer_bridge[$$]: sending VencryptPlain user and passwd.\n"; + my $ulen = pack("C", length($user)); + my $plen = pack("C", length($pass)); + # (note this should be MSB, network byte order...) + syswrite($server_sock, $u0, 1); + syswrite($server_sock, $u0, 1); + syswrite($server_sock, $u0, 1); + syswrite($server_sock, $ulen, 1); + syswrite($server_sock, $u0, 1); + syswrite($server_sock, $u0, 1); + syswrite($server_sock, $u0, 1); + syswrite($server_sock, $plen, 1); + syswrite($server_sock, $user, length($user)); + syswrite($server_sock, $pass, length($pass)); + } + unlink($handshake_file); + + my $ft = 0; + if ($fake_type eq "None") { + $ft = 1; + } elsif ($fake_type eq "VncAuth") { + $ft = 2; + } else { + die "pproxy: vencrypt_viewer_bridge[$$]: unknown fake type: $fake_type\n"; + } + my $fp = pack("C", $ft); + if ($viewer_major > 3 || $viewer_minor >= 7) { + syswrite($viewer_sock, $u1, 1); + syswrite($viewer_sock, $fp, 1); + my $cr; + sysread($viewer_sock, $cr, 1); + $cr = unpack("C", $cr); + if ($cr != $ft) { + die "pproxy: vencrypt_viewer_bridge[$$]: client selected wrong type: $cr / $ft\n"; + } + } else { + print STDERR "pproxy: vencrypt_viewer_bridge[$$]: faking RFB version 3.3 to viewer.\n"; + # send 4 bytes sect type to viewer: + # (note this should be MSB, network byte order...) + syswrite($viewer_sock, $u0, 1); + syswrite($viewer_sock, $u0, 1); + syswrite($viewer_sock, $u0, 1); + syswrite($viewer_sock, $fp, 1); + if ($ft == 1) { + # even None has security result, so read it here and discard it. + my $sr = ""; + sysread($server_sock, $sr, 4); + } + } + } + + $listen_handle = $viewer_sock; + $sock = $server_sock; + + xfer_both(); +} +' + # ' + # xpg_echo will expand \n \r, etc. + # try to unset and then test for it. + if type shopt > /dev/null 2>&1; then + shopt -u xpg_echo >/dev/null 2>&1 + fi + v='print STDOUT "abc\n";' + echo "$v" > $tf + chmod 700 $tf + + lc=`wc -l $tf | awk '{print $1}'` + if [ "X$lc" = "X1" ]; then + echo "$cod" > $tf + else + printf "%s" "$cod" > $tf + echo "" >> $tf + fi + # prime perl + perl -e 'use IO::Socket::INET; select(undef, undef, undef, 0.01)' >/dev/null 2>&1 +} + +# make_tcert is no longer invoked via the ssvnc gui (Listen mode). +# make_tcert is for testing only now via -mycert BUILTIN +make_tcert() { + tcert="/tmp/ss_vnc_viewer_tcert${RANDOM}.$$" + tcert=`mytmp "$tcert"` + cat > $tcert < Advanced -> Private SSH KnownHosts file' (or set" + echo "** Warning: SSVNC_KNOWN_HOSTS_FILE directly) to a per-connection known hosts" + echo "** Warning: file. That file holds the 'localhost' cert for this specific" + echo "** Warning: connection. This yields a both secure and convenient solution." + echo "" +} + +space_expand() { + str=`echo "$1" | sed -e 's/%SPACE/ /g' -e 's/%TAB/\t/g'` + echo "$str" +} + +# handle ssh case: +# +if [ "X$use_ssh" = "X1" ]; then + # + # USING SSH + # + ssh_port="22" + ssh_host="$host" + vnc_host="$localhost" + ssh_UKHF="" + localhost_extra="" + # let user override ssh via $SSH + ssh=${SSH:-"ssh -x"} + + sshword=`echo "$ssh" | awk '{print $1}'` + if [ "X$sshword" != "X" ]; then + if [ -x "$sshword" ]; then + : + elif type "$sshword" > /dev/null 2>&1; then + : + else + echo "" + echo "*********************************************************" + echo "** Problem finding the SSH command '$sshword': **" + echo "" + type "$sshword" + echo "" + echo "** Perhaps you need to install the SSH client package. **" + echo "*********************************************************" + echo "" + sleep 5 + fi + fi + + ssh_NHAFL="-o NoHostAuthenticationForLocalhost=yes" + if [ "X$SSVNC_SSH_LOCALHOST_AUTH" = "X1" ]; then + ssh_NHAFL="" + fi + if [ "X$SSVNC_KNOWN_HOSTS_FILE" != "X" ]; then + ssh_NHAFL="" + + ssh_UKHF="-o UserKnownHostsFile=$SSVNC_KNOWN_HOSTS_FILE" + ssh_args="$ssh_args $ssh_UKHF" + if [ ! -f "$SSVNC_KNOWN_HOSTS_FILE" ]; then + touch "$SSVNC_KNOWN_HOSTS_FILE" >/dev/null 2>&1 + fi + chmod 600 "$SSVNC_KNOWN_HOSTS_FILE" >/dev/null 2>&1 + fi + did_ssh_NHAFL="" + + if [ "X$SSVNC_LIM_ACCEPT_PRELOAD" != "X" ]; then + SSVNC_LIM_ACCEPT_PRELOAD="$SSVNC_BASEDIR/$SSVNC_UNAME/$SSVNC_LIM_ACCEPT_PRELOAD" + fi + if [ "X$SSVNC_LIM_ACCEPT_PRELOAD" != "X" ]; then + echo "" + echo "SSVNC_LIM_ACCEPT_PRELOAD=$SSVNC_LIM_ACCEPT_PRELOAD" + fi + + if [ "X$SSVNC_LIM_ACCEPT_PRELOAD" != "X" -a -f "$SSVNC_LIM_ACCEPT_PRELOAD" ]; then + plvar=LD_PRELOAD + if uname | grep Darwin >/dev/null; then + plvar="DYLD_FORCE_FLAT_NAMESPACE=1 DYLD_INSERT_LIBRARIES" + fi + ssh="env $plvar=$SSVNC_LIM_ACCEPT_PRELOAD $ssh" + else + SSVNC_LIM_ACCEPT_PRELOAD="" + fi + + ssh_vencrypt_proxy="" + # We handle vencrypt for SSH+SSL mode. + if echo "$proxy" | grep 'vencrypt://' > /dev/null; then + proxynew="" + for part in `echo "$proxy" | tr ',' ' '` + do + if echo "$part" | egrep -i '^vencrypt://' > /dev/null; then + ssh_vencrypt_proxy=$part + else + if [ "X$proxynew" = "X" ]; then + proxynew="$part" + else + proxynew="$proxynew,$part" + fi + fi + done + proxy=$proxynew + fi + Kecho ssh_vencrypt_proxy=$ssh_vencrypt_proxy + + # note that user must supply http:// for web proxy in SSH and SSH+SSL. + # No xxxx:// implies ssh server+port. + # + if echo "$proxy" | egrep '(http|https|socks|socks4|socks5)://' > /dev/null; then + # Handle Web or SOCKS proxy(ies) for the initial connect. + Kecho host=$host + Kecho port=$port + pproxy="" + sproxy1="" + sproxy_rest="" + for part in `echo "$proxy" | tr ',' ' '` + do + Kecho proxy_part=$part + if [ "X$part" = "X" ]; then + continue + elif echo "$part" | egrep -i '^(http|https|socks|socks4|socks5)://' > /dev/null; then + pproxy="$pproxy,$part" + else + if [ "X$sproxy1" = "X" ]; then + sproxy1="$part" + else + sproxy_rest="$sproxy_rest,$part" + fi + fi + done + pproxy=`echo "$pproxy" | sed -e 's/^,,*//' -e 's/,,*/,/g'` + sproxy_rest=`echo "$sproxy_rest" | sed -e 's/^,,*//' -e 's/,,*/,/g'` + + Kecho pproxy=$pproxy + Kecho sproxy1=$sproxy1 + Kecho sproxy_rest=$sproxy_rest + + sproxy1_host="" + sproxy1_port="" + sproxy1_user="" + + if [ "X$sproxy1" != "X" ]; then + # XXX fix ipv6 ip adder here and below. + sproxy1_host=`echo "$sproxy1" | awk -F: '{print $1}'` + sproxy1_user=`echo "$sproxy1_host" | awk -F@ '{print $1}'` + sproxy1_host=`echo "$sproxy1_host" | awk -F@ '{print $2}'` + if [ "X$sproxy1_host" = "X" ]; then + sproxy1_host=$sproxy1_user + sproxy1_user="" + else + sproxy1_user="${sproxy1_user}@" + fi + sproxy1_port=`echo "$sproxy1" | awk -F: '{print $2}'` + if [ "X$sproxy1_port" = "X" ]; then + sproxy1_port="22" + fi + else + sproxy1_host=`echo "$host" | awk -F: '{print $1}'` + sproxy1_user=`echo "$sproxy1_host" | awk -F@ '{print $1}'` + sproxy1_host=`echo "$sproxy1_host" | awk -F@ '{print $2}'` + if [ "X$sproxy1_host" = "X" ]; then + sproxy1_host=$sproxy1_user + sproxy1_user="" + else + sproxy1_user="${sproxy1_user}@" + fi + sproxy1_port=`echo "$host" | awk -F: '{print $2}'` + if [ "X$sproxy1_port" = "X" ]; then + sproxy1_port="22" + fi + fi + + Kecho sproxy1_host=$sproxy1_host + Kecho sproxy1_port=$sproxy1_port + Kecho sproxy1_user=$sproxy1_user + + ptmp="/tmp/ss_vncviewer_ssh${RANDOM}.$$.pl" + ptmp=`mytmp "$ptmp"` + PPROXY_REMOVE=1; export PPROXY_REMOVE + proxy=$pproxy + port_save=$port + host_save=$host + if [ "X$sproxy1_host" != "X" ]; then + host=$sproxy1_host + fi + if [ "X$sproxy1_port" != "X" ]; then + port=$sproxy1_port + fi + host=`echo "$host" | sed -e 's/^.*@//'` + port=`echo "$port" | sed -e 's/^.*://'` + pcode "$ptmp" + port=$port_save + host=$host_save + + nd=`findfree 6600` + PPROXY_LISTEN=$nd; export PPROXY_LISTEN + # XXX no reverse forever PPROXY_LOOP_THYSELF ... + $ptmp & + sleep 1 + if [ "X$ssh_NHAFL" != "X" -a "X$did_ssh_NHAFL" != "X1" ]; then + NHAFL_warning + ssh_args="$ssh_args $ssh_NHAFL" + did_ssh_NHAFL=1 + fi + sleep 1 + if [ "X$sproxy1" = "X" ]; then + u="" + if echo "$host" | grep '@' > /dev/null; then + u=`echo "$host" | sed -e 's/@.*$/@/'` + fi + + proxy="${u}$localhost:$nd" + else + proxy="${sproxy1_user}$localhost:$nd" + fi + localhost_extra=".2" + if [ "X$sproxy_rest" != "X" ]; then + proxy="$proxy,$sproxy_rest" + fi + Kecho proxy=$proxy + fi + + if echo "$proxy" | grep "," > /dev/null; then + + proxy1=`echo "$proxy" | awk -F, '{print $1}'` + proxy2=`echo "$proxy" | awk -F, '{print $2}'` + + # user1@gw1.com:port1,user2@ws2:port2 + ssh_host1=`echo "$proxy1" | awk -F: '{print $1}'` + ssh_port1=`echo "$proxy1" | awk -F: '{print $2}'` + if [ "X$ssh_port1" != "X" ]; then + ssh_port1="-p $ssh_port1" + fi + ssh_host2=`echo "$proxy2" | awk -F: '{print $1}'` + ssh_user2=`echo "$ssh_host2" | awk -F@ '{print $1}'` + ssh_host2=`echo "$ssh_host2" | awk -F@ '{print $2}'` + if [ "X$ssh_host2" = "X" ]; then + ssh_host2=$ssh_user2 + ssh_user2="" + else + ssh_user2="${ssh_user2}@" + fi + ssh_port2=`echo "$proxy2" | awk -F: '{print $2}'` + if [ "X$ssh_port2" = "X" ]; then + ssh_port2="22" + fi + proxport=`findfree 3500` + if [ "X$ssh_NHAFL" != "X" -a "X$did_ssh_NHAFL" != "X1" ]; then + NHAFL_warning + did_ssh_NHAFL=1 + sleep 1 + fi + echo + echo "Running 1st ssh proxy:" + ukhf="" + if [ "X$ssh_UKHF" != "X" ]; then + ukhf="$ssh_UKHF$localhost_extra" + fi + if echo "$ssh_host1" | grep '%' > /dev/null; then + uath=`space_expand "$ssh_host1"` + else + uath="$ssh_host1" + fi + echo "$ssh -f -x $ssh_port1 $targ -e none $ssh_NHAFL $ukhf -L $proxport:$ssh_host2:$ssh_port2 \"$uath\" \"sleep 30\"" + echo "" + $ssh -f -x $ssh_port1 $targ -e none $ssh_NHAFL $ukhf -L $proxport:$ssh_host2:$ssh_port2 "$uath" "sleep 30" + ssh_args="$ssh_args $ssh_NHAFL" + sleep 1 + stty sane + proxy="${ssh_user2}$localhost:$proxport" + fi + + if [ "X$proxy" != "X" ]; then + ssh_port=`echo "$proxy" | awk -F: '{print $2}'` + if [ "X$ssh_port" = "X" ]; then + ssh_port="22" + fi + ssh_host=`echo "$proxy" | awk -F: '{print $1}'` + vnc_host="$host" + fi + + echo "" + echo "Running ssh:" + sz=`echo "$ssh_cmd" | wc -c` + if [ "$sz" -gt 300 ]; then + info="..." + else + info="$ssh_cmd" + fi + + C="" + if [ "X$SS_VNCVIEWER_USE_C" != "X" ]; then + C="-C" + fi + + getport="" + teeport="" + if echo "$ssh_cmd" | egrep "(PORT=|P=) " > /dev/null; then + getport=1 + if echo "$ssh_cmd" | egrep "P= " > /dev/null; then + teeport=1 + fi + + PORT="" + ssh_cmd=`echo "$ssh_cmd" | sed -e 's/PORT=[ ]*//' -e 's/P=//'` + SSVNC_NO_ENC_WARN=1 + if [ "X$use_sshssl" = "X" ]; then + direct_connect=1 + fi + fi + if [ "X$getport" != "X" ]; then + ssh_redir="-D ${use}" + elif [ "X$reverse" = "X" ]; then + ssh_redir="-L ${use}:${vnc_host}:${port}" + else + ssh_redir="-R ${port}:${vnc_host}:${use}" + fi + pmark=`sh -c 'echo $$'` + + # the -t option actually speeds up typing response via VNC!! + if [ "X$ssh_port" = "X22" ]; then + ssh_port="" + else + ssh_port="-p $ssh_port" + fi + + if echo "$ssh_host" | grep '%' > /dev/null; then + uath=`space_expand "$ssh_host"` + else + uath="$ssh_host" + fi + if [ "X$SS_VNCVIEWER_SSH_ONLY" != "X" ]; then + echo "$ssh -x $ssh_port $targ $C $ssh_args \"$uath\" \"$info\"" + echo "" + $ssh -x $ssh_port $targ $C $ssh_args "$uath" "$ssh_cmd" + exit $? + + elif [ "X$SS_VNCVIEWER_NO_F" != "X" ]; then + echo "$ssh -x $ssh_port $targ $C $ssh_redir $ssh_args \"$uath\" \"$info\"" + echo "" + $ssh -x $ssh_port $targ $C $ssh_redir $ssh_args "$uath" "$ssh_cmd" + rc=$? + + elif [ "X$getport" != "X" ]; then + tport=/tmp/ss_vncviewer_tport${RANDOM}.$$ + tport=`mytmp "$tport"` + tport2=/tmp/ss_vncviewer_tport2${RANDOM}.$$ + tport2=`mytmp "$tport2"` + + if [ "X$rsh" != "X1" ]; then + if echo "$ssh_cmd" | grep "sudo " > /dev/null; then + echo "" + echo "Initial ssh with 'sudo id' to prime sudo so hopefully the next one" + echo "will require no password..." + echo "" + targ="-t" + $ssh -x $ssh_port $targ $ssh_args "$uath" "sudo id; tty" + echo "" + fi + echo "$ssh -x -f $ssh_port $targ $C $ssh_redir $ssh_args \"$uath\" \"$info\"" + echo "" + $ssh -x -f $ssh_port $targ $C $ssh_redir $ssh_args "$uath" "$ssh_cmd" > $tport 2> $tport2 + if [ "X$teeport" = "X1" ]; then + tail -f $tport 1>&2 & + tail_pid=$! + tail -f $tport2 1>&2 & + tail_pid2=$! + fi + rc=$? + else + rsh_setup + echo "rsh $ul \"$ssh_host\" \"$ssh_cmd\"" + echo "" + rsh $ul "$ssh_host" "$ssh_cmd" > $tport & + sleep 1 + rc=0 + fi + + if [ "X$SSVNC_EXTRA_SLEEP" != "X" ]; then + echo "sleep $SSVNC_EXTRA_SLEEP" + sleep $SSVNC_EXTRA_SLEEP + fi + + stty sane + i=0 + if type perl > /dev/null 2>&1; then + imax=50 + sleepit="perl -e 'select(undef, undef, undef, 0.20)'" + else + imax=10 + sleepit="sleep 1" + fi + while [ $i -lt $imax ]; do + #echo $sleepit + eval $sleepit + PORT=`grep "^PORT=" $tport | tr '\r' ' ' | head -n 1 | sed -e 's/PORT=//' -e 's/\r//g' -e 's/ *$//'` + if echo "$PORT" | grep '^[0-9][0-9]*$' > /dev/null; then + break + fi + vnss=`sed -e 's/\r//g' $tport $tport2 | egrep -i '^(New.* desktop is|A VNC server is already running).*:[0-9[0-9]*$' | head -n 1 | awk '{print $NF}'` + if [ "X$vnss" != "X" ]; then + PORT=`echo "$vnss" | awk -F: '{print $2}'` + if echo "$PORT" | grep '^[0-9][0-9]*$' > /dev/null; then + if [ $PORT -lt 100 ]; then + PORT=`expr $PORT + 5900` + fi + fi + if echo "$PORT" | grep '^[0-9][0-9]*$' > /dev/null; then + vnss=`sed -e 's/\r//g' $tport | egrep -i '^(New.* desktop is|A VNC server is already running).*:[0-9[0-9]*$' | head -n 1` + echo "vncserver string: $vnss" 1>&2 + break + fi + fi + i=`expr $i + 1` + done + + echo "found: PORT='$PORT'" 1>&2 + lh6="" + if [ "X$SSVNC_PORT_IPV6" != "X" ]; then + lh6=1 + elif egrep 'Info: listening on IPv6 only|Info: listening only on IPv6' $tport > /dev/null; then + lh6=1 + fi + if [ "X$lh6" = "X1" ]; then + echo "set SOCKS5 localhost to ::1" 1>&2 + fi + rm -f $tport $tport2 + if [ "X$rsh" = "X1" ]; then + rsh_viewer "$@" + exit $? + fi + PPROXY_SOCKS=5 + if [ "X$SSVNC_SOCKS5" != "X" ]; then + PPROXY_SOCKS=5 + elif [ "X$SSVNC_SOCKS4" != "X" ]; then + PPROXY_SOCKS=1 + fi + export PPROXY_SOCKS + if [ "X$lh6" = "X" ]; then + host="$localhost" + else + host="::1" + fi + port="$PORT" + proxy="$localhost:$use" + + else + if [ "X$rsh" != "X1" ]; then + echo "$ssh -x -f $ssh_port $targ $C $ssh_redir $ssh_args \"$uath\" \"$info\"" + echo "" + $ssh -x -f $ssh_port $targ $C $ssh_redir $ssh_args "$uath" "$ssh_cmd" + rc=$? + else + rsh_setup + echo "rsh $ul \"$ssh_host\" \"$ssh_cmd\"" + echo "" + rsh $ul "$ssh_host" "$ssh_cmd" & + sleep 1 + PORT=$port + rsh_viewer "$@" + exit $? + fi + fi + + if [ "$rc" != "0" ]; then + echo "" + echo "ssh to \"$uath\" failed." + exit 1 + fi + stty sane + + c=0 + pssh="" + while [ $c -lt 40 ] + do + p=`expr $pmark + $c` + pout=`ps -p "$p" 2>/dev/null | grep -v '^[ ]*PID' | sed -e 's/-L.*$//' -e 's/-x .*$//'` + if echo "$pout" | grep "ssh" > /dev/null; then + if echo "$pout" | egrep -i 'ssh.*(-add|-agent|-ask|-keygen|-argv0|vnc)' >/dev/null; then + : + elif echo "$pout" | egrep -i 'scp|sshd' >/dev/null; then + : + else + pssh=$p + break + fi + fi + c=`expr $c + 1` + done + if [ "X$getport" != "X" ]; then + : + elif [ "X$SSVNC_LIM_ACCEPT_PRELOAD" != "X" ] ; then + sleep 2 + elif [ "X$ssh_cmd" = "Xsleep $ssh_sleep" ] ; then + #echo T sleep 1 + sleep 1 + elif echo "$ssh_cmd" | grep '^sleep ' >/dev/null; then + #echo T sleep 2 + sleep 2 + else + # let any command get started a bit. + #echo T sleep 5 + sleep 5 + fi + echo "" + #reset + stty sane + if [ "X$SSVNC_EXTRA_SLEEP" != "X" ]; then + echo "sleep $SSVNC_EXTRA_SLEEP" + sleep $SSVNC_EXTRA_SLEEP + fi + echo "ssh_pid='$pssh'"; echo + if [ "X$use_sshssl" = "X" -a "X$getport" = "X" ]; then + if [ "X$SSVNC_EXTRA_COMMAND" != "X" ]; then + (sh -c "$SSVNC_EXTRA_COMMAND") & + echo "($SSVNC_EXTRA_COMMAND) &"; echo + fi + echo "Running viewer:" + + trap "final" 0 2 15 + if [ "X$reverse" = "X" ]; then + echo "$VNCVIEWERCMD" "$@" $localhost:$N + echo "" + $VNCVIEWERCMD "$@" $localhost:$N + if [ $? != 0 ]; then + echo "vncviewer command failed: $?" + if [ "X$secondtry" = "X1" ]; then + sleep 2 + $VNCVIEWERCMD "$@" $localhost:$N + fi + fi + else + echo "" + echo "NOTE: Press Ctrl-C to terminate viewer LISTEN mode." + echo "" + N2=$N + if [ "X$VNCVIEWER_IS_REALVNC4" = "X1" ]; then + N2=`echo "$N2" | sed -e 's/://g'` + if [ $N2 -le 200 ]; then + N2=`expr $N2 + 5500` + fi + fi + echo "$VNCVIEWERCMD" "$@" -listen $N2 + echo "" + $VNCVIEWERCMD "$@" -listen $N2 + fi + + exit $? + else + use2=`findfree 5960` + host0=$host + port0=$port + host=$localhost + port=$use + use=$use2 + N=`expr $use - 5900` + if [ "X$getport" != "X" ]; then + host="$host0" + port="$port0" + else + proxy="" + fi + if [ "X$ssh_vencrypt_proxy" != "X" ]; then + ssh_vencrypt_proxy="vencrypt://$host:$port" + if [ "X$proxy" = "X" ]; then + proxy=$ssh_vencrypt_proxy + else + proxy="$proxy,$ssh_vencrypt_proxy" + fi + Kecho "proxy_now=$proxy" + unset PPROXY_LISTEN + fi + fi +fi + +if [ "X$stunnel_set_here" = "X1" -a "X$showcert" = "X" ]; then + if type $STUNNEL > /dev/null 2>&1; then + : + else + echo "" + echo "***************************************************************" + echo "** Problem finding the Stunnel command '$STUNNEL': **" + echo "" + type $STUNNEL + echo "" + echo "** Perhaps you need to install the stunnel/stunnel4 package. **" + echo "***************************************************************" + echo "" + sleep 5 + fi +fi + +# create the stunnel config file: +if [ "X$verify" != "X" ]; then + if [ -d $verify ]; then + verify="CApath = $verify" + else + verify="CAfile = $verify" + fi + verify="$verify +verify = 2" +fi +if [ "X$SSVNC_STUNNEL_VERIFY3" != "X" ]; then + verify=`echo "$verify" | sed -e 's/verify = 2/verify = 3/'` +fi +if [ "X$mycert" != "X" ]; then + cert="cert = $mycert" +fi +if [ "X$crl" != "X" ]; then + if [ -d $crl ]; then + crl="CRLpath = $crl" + else + crl="CRLfile = $crl" + fi +fi + +if [ "X$showcert" = "X1" ]; then + if [ "X$have_uvnc_dsm_helper_showcert" = "X1" ]; then + : + elif [ "X$SSVNC_NO_IPV6_PROXY" != "X" ]; then + : + elif [ "X$ipv6" = "X1" -a "X$proxy" = "X" ]; then + proxy="ipv6://$host:$port" + fi +fi + +if [ "X$direct_connect" != "X" -a "X$STUNNEL_LISTEN" != "X" ]; then + proxy=reverse_direct +fi + +ptmp="" +if [ "X$proxy" != "X" ]; then + ptmp="/tmp/ss_vncviewer${RANDOM}.$$.pl" + ptmp=`mytmp "$ptmp"` + PPROXY_REMOVE=1; export PPROXY_REMOVE + pcode "$ptmp" + if [ "X$showcert" != "X1" -a "X$direct_connect" = "X" ]; then + if uname | egrep 'Darwin|SunOS' >/dev/null; then + vout=`echo "$proxy" | grep -i vencrypt` + if [ "X$vout" != "X" -a "X$reverse" = "X1" ]; then + # need to exec for reverse vencrypt + connect="exec = $ptmp" + else + # on mac and solaris we need to listen on socket instead of stdio: + nd=`findfree 6700` + PPROXY_LISTEN=$nd + export PPROXY_LISTEN + if [ "X$reverse" = "X" ]; then + $ptmp & + fi + sleep 2 + host="$localhost" + port="$nd" + connect="connect = $localhost:$nd" + fi + else + # otherwise on unix we can exec it: + connect="exec = $ptmp" + fi + else + connect="exec = $ptmp" + fi +else + connect="connect = $host:$port" +fi + +# handle showcert case: +# +if [ "X$showcert" = "X1" ]; then + if [ "X$proxy" != "X" ]; then + PPROXY_LISTEN=$use + export PPROXY_LISTEN + if [ "X$SS_DEBUG" != "X" ]; then + $ptmp & + else + $ptmp 2>/dev/null & + fi + sleep 1 + more_sleep=1 + if uname | grep Linux > /dev/null; then + if netstat -ant | grep LISTEN | grep "127.0.0.1:$use" > /dev/null; then + more_sleep="" + fi + elif uname | grep SunOS > /dev/null; then + if netstat -an -f inet -P tcp | grep LISTEN | grep "127.0.0.1.$use" > /dev/null; then + more_sleep="" + fi + elif uname | egrep -i 'bsd|darwin' > /dev/null; then + if netstat -ant -f inet | grep LISTEN | grep "127.0.0.1.$use" > /dev/null; then + more_sleep="" + fi + fi + if [ "X$more_sleep" = "X1" ]; then + sleep 1 + fi + host="$localhost" + port="$use" + fi + cipher_args="" + if [ "X$ciphers" != "X" ]; then + cipher_args=`echo "$ciphers" | sed -e 's/ciphers=/-cipher /'` + fi + if [ "X$have_uvnc_dsm_helper_showcert" = "X1" ]; then + : + elif type openssl > /dev/null 2>&1; then + : + else + echo "" + echo "********************************************************" + echo "** Problem finding the OpenSSL command 'openssl': **" + echo "" + type openssl 2>&1 + echo "" + echo "** Perhaps you need to install the 'openssl' package. **" + echo "********************************************************" + echo "" + fi + #echo "openssl s_client $cipher_args -connect $host:$port" + if [ "X$reverse" = "X" ]; then + if type host > /dev/null 2>/dev/null; then + host $host >/dev/null 2>&1 + host $host >/dev/null 2>&1 + fi + timeout=15 + if [ "X$SSVNC_FETCH_TIMEOUT" != "X" ]; then + timeout=$SSVNC_FETCH_TIMEOUT + fi + if [ "X$have_uvnc_dsm_helper_showcert" = "X1" ]; then + if type pkill >/dev/null 2>&1; then + (sleep $timeout; if kill -0 $$; then pkill -TERM -f "ultravnc_dsm_helper.*$host.*$port"; fi) >/dev/null 2>&1 & + fi + ultravnc_dsm_helper showcert $host:$port 2>&1 + else + if type pkill >/dev/null 2>&1; then + (sleep $timeout; if kill -0 $$; then pkill -TERM -f "openssl.*s_client.*$host.*$port"; fi) >/dev/null 2>&1 & + fi + openssl s_client $cipher_args -prexit -connect $host:$port 2>&1 < /dev/null + fi + rc=$? + else + tcert="" + if [ "X$mycert" = "X" ]; then + tcert=`make_tcert` + cert_args="-cert $tcert -CAfile $tcert" + else + cert_args="-cert $mycert -CAfile $mycert" + fi + tmp_out=/tmp/showcert_out${RANDOM}.$$ + tmp_out=`mytmp "$tmp_out"` + tmp_err=/tmp/showcert_err${RANDOM}.$$ + tmp_err=`mytmp "$tmp_err"` + + #echo "openssl s_server $cipher_args $cert_args -accept $port -verify 2 > $tmp_out 2> $tmp_err" 1>&2 + + # assume we have perl: + check_perl perl + + perl -e " + \$p = open(O, \"|openssl s_server $cipher_args $cert_args -accept $port -verify 2 1>$tmp_out 2> $tmp_err\"); + exit 1 unless \$p; + while (1) { + sleep 1; + if (!open(F, \"<$tmp_out\")) { + kill \$p; + exit 1; + } + while () { + if (/RFB 00/) { + fsleep(0.25); + print O \"RFB 000.000\\n\"; + fsleep(1.00); + kill \$p; + fsleep(0.25); + exit 0; + } + } + close F; + } + sub fsleep { + select(undef, undef, undef, shift); + } + "; + + echo "" + cat $tmp_out + echo "" + echo "----2----" + cat $tmp_err + if grep BEGIN.CERTIFICATE $tmp_out >/dev/null; then + rc=0 + else + rc=1 + fi + + rm -f $tmp_out $tmp_err + fi + if [ "X$SSVNC_PREDIGESTED_HANDSHAKE" != "X" ]; then + rm -f $SSVNC_PREDIGESTED_HANDSHAKE + fi + if [ "X$SSVNC_SHOWCERT_EXIT_0" = "X1" ]; then + exit 0 + else + exit $rc + fi +fi + +# handle direct connect case: +# +if [ "X$direct_connect" != "X" ]; then + if [ "X$SSVNC_ULTRA_DSM" != "X" ]; then + SSVNC_NO_ENC_WARN=1 + echo "" + echo "Using UltraVNC DSM Plugin key for encryption:" + echo "" + ustr=`echo "$SSVNC_ULTRA_DSM" | sed -e 's/pw=[^ ]*/pw=******/g'` + echo " $ustr PORT HOST:PORT" + echo "" + elif [ "X$getport" = "X" ]; then + echo "" + echo "Running viewer for direct connection:" + if echo X"$@" | grep chatonly > /dev/null; then + : + else + echo "" + echo "** WARNING: THERE WILL BE NO SSL OR SSH ENCRYPTION **" + echo "" + fi + fi + x="" + if [ "X$SSVNC_NO_ENC_WARN" != "X" ]; then + if [ "X$getport" = "X" ]; then + sleep 1 + fi + elif type printf > /dev/null 2>&1; then + printf "Are you sure you want to continue? [y]/n " + read x + else + echo -n "Are you sure you want to continue? [y]/n " + read x + fi + if [ "X$x" = "Xn" ]; then + exit 1 + fi + echo "" + if [ "X$ptmp" != "X" ]; then + if [ "X$reverse" = "X" ]; then + PPROXY_LISTEN=$use + export PPROXY_LISTEN + else + if [ "X$proxy" = "Xreverse_direct" ]; then + PPROXY_LISTEN="$STUNNEL_LISTEN:`expr 5500 + $disp`" + PPROXY_DEST="$localhost:$use" + PPROXY_PROXY="ipv6://$localhost:$use" # not always ipv6.. + export PPROXY_LISTEN PPROXY_DEST PPROXY_PROXY + pps=1 + else + PPROXY_REVERSE="$localhost:$use" + export PPROXY_LISTEN + pps=3 + fi + if [ "X$SSVNC_LISTEN_ONCE" != "X1" ]; then + PPROXY_LOOP_THYSELF=`mytmp "/tmp/pproxy_loop_thyself.${RANDOM}.$$"` + export PPROXY_LOOP_THYSELF + pps=2 + fi + if [ "X$SSVNC_EXTRA_SLEEP" != "X" ]; then + pps=`expr $pps + $SSVNC_EXTRA_SLEEP` + fi + PPROXY_SLEEP=$pps; export PPROXY_SLEEP; + PPROXY_KILLPID=+1; export PPROXY_KILLPID; + fi + + $ptmp & + + if [ "X$reverse" = "X" ]; then + #sleep 2 + #echo T sleep 1 + sleep 1 + fi + host="$localhost" + disp="$N" + port=`expr $disp + 5900` + fi + if [ "X$SSVNC_EXTRA_SLEEP" != "X" ]; then + echo "T sleep $SSVNC_EXTRA_SLEEP" + sleep $SSVNC_EXTRA_SLEEP + fi + if [ "X$SSVNC_EXTRA_COMMAND" != "X" ]; then + (sh -c "$SSVNC_EXTRA_COMMAND") & + echo "($SSVNC_EXTRA_COMMAND) &"; echo + fi + if [ "X$reverse" = "X" ]; then + hostdisp="$host:$disp" + if [ "X$SSVNC_ULTRA_DSM" != "X" ]; then + if [ "X$SSVNC_USE_OURS" = "X1" ]; then + hostdisp="exec=$SSVNC_ULTRA_DSM 0 $host:$port" + else + pf=`findfree 5970` + cmd="$SSVNC_ULTRA_DSM -$pf $host:$port" + pf=`expr $pf - 5900` + hostdisp="$localhost:$pf" + ustr=`echo "$cmd" | sed -e 's/pw=[^ ]*/pw=******/g'` + echo "Running:" + echo + echo "$ustr &" + echo + $cmd & + dsm_pid=$! + sleep 2 + fi + fi + hostdisp2=`echo "$hostdisp" | sed -e 's/pw=[^ ]*/pw=******/g'` + echo "$VNCVIEWERCMD" "$@" "$hostdisp2" + trap "final" 0 2 15 + echo "" + $VNCVIEWERCMD "$@" "$hostdisp" + if [ $? != 0 ]; then + echo "vncviewer command failed: $?" + if [ "X$secondtry" = "X1" ]; then + sleep 2 + $VNCVIEWERCMD "$@" "$hostdisp" + fi + fi + else + echo "" + echo "NOTE: Press Ctrl-C to terminate viewer LISTEN mode." + echo "" + trap "final" 0 2 15 + if [ "X$SSVNC_ULTRA_DSM" != "X" ]; then + if [ "X$SSVNC_LISTEN_ONCE" = "X1" ]; then + echo "NOTE: The ultravnc_dsm_helper only runs once. So after the first LISTEN" + echo " ends you must restart the Listening mode. You may also need to" + echo " Press Ctrl-C to stop the viewer and restart for another connection." + echo "" + fi + #SSVNC_LISTEN_ONCE=1; export SSVNC_LISTEN_ONCE + VNCVIEWER_LISTEN_LOCALHOST=1 + export VNCVIEWER_LISTEN_LOCALHOST + dport=`expr 5500 + $disp` + cmd="$SSVNC_ULTRA_DSM $dport $localhost:$use" + ustr=`echo "$cmd" | sed -e 's/pw=[^ ]*/pw=******/g'` + echo "Running:" + echo + echo "$ustr &" + echo + if [ "X$SSVNC_LISTEN_ONCE" = "X1" ]; then + $cmd & + dsm_pid=$! + else + while [ 1 ]; do $cmd; sleep 1; done & + dsm_pid=$! + fi + sleep 2 + disp=$use + if [ $disp -ge 5500 ]; then + disp=`expr $disp - 5500` + fi + fi + disp2=$disp + if [ "X$VNCVIEWER_IS_REALVNC4" = "X1" ]; then + disp2=`echo "$disp2" | sed -e 's/://g'` + if [ $disp2 -le 200 ]; then + disp2=`expr $disp2 + 5500` + fi + fi + echo "$VNCVIEWERCMD" "$@" -listen $disp2 + echo "" + $VNCVIEWERCMD "$@" -listen $disp2 + if [ "X$PPROXY_LOOP_THYSELF" != "X" ]; then + rm -f $PPROXY_LOOP_THYSELF + fi + fi + exit $? +fi + +tmp_cfg=/tmp/ss_vncviewer${RANDOM}.$$ +tmp_cfg=`mytmp "$tmp_cfg"` + +stunnel_exec="" +if [ "X$SSVNC_USE_OURS" != "X1" ]; then + : +elif echo $STUNNEL_EXTRA_SVC_OPTS | grep '#stunnel-exec' > /dev/null; then + stunnel_exec="#" +fi + +if [ "X$reverse" = "X" ]; then + + if echo "$proxy" | grep "^repeater://" > /dev/null; then + if [ "X$cert" = "XBUILTIN" ]; then + ttcert=`make_tcert` + cert="cert = $ttcert" + fi + # Note for listen mode, an empty cert will cause stunnel to fail. + # The ssvnc gui will have already taken care of this. + fi + + cat > "$tmp_cfg" < /dev/null; then + hloc="$localhost:" + pv=`findfree 5570` + proxy="vencrypt:$pv:$port" + port=$pv + if [ "X$anondh_set" = "X1" ]; then + # not needed for ANONDH in this mode + #ciphers="ciphers = ADH:@STRENGTH" + : + fi + fi + cat > "$tmp_cfg" < /dev/null 2>&1 + $STUNNEL "$tmp_cfg" < /dev/tty > /dev/tty & + stunnel_pid=$! + echo "" + + # pause here to let the user supply a possible passphrase for the + # mycert key: + if [ "X$mycert" != "X" ]; then + nsl=10 + dsl=0 + if [ ! -f $mycert ]; then + dsl=0 + elif grep -i 'Proc-Type.*ENCRYPTED' "$mycert" > /dev/null 2>/dev/null; then + dsl=1 + fi + if [ "X$dsl" = "X1" ]; then + echo "" + echo "(** pausing $nsl secs for possible certificate passphrase dialog **)" + echo "" + sleep $nsl + echo "(** done pausing for passphrase **)" + echo "" + fi + fi + #echo T sleep 1 + sleep 1 + rm -f "$tmp_cfg" +fi + + +echo "" +if [ "X$SSVNC_EXTRA_SLEEP" != "X" ]; then + echo "sleep $SSVNC_EXTRA_SLEEP" + sleep $SSVNC_EXTRA_SLEEP +fi +if [ "X$SSVNC_EXTRA_COMMAND" != "X" ]; then + (sh -c "$SSVNC_EXTRA_COMMAND") & + echo "($SSVNC_EXTRA_COMMAND) &"; echo +fi + +if [ "X$reverse" = "X" ]; then + if [ "X$NEED_VENCRYPT_VIEWER_BRIDGE" = "X1" -a "X$ptmp" != "X" ] ; then + port1=`expr 5900 + $N` # stunnel port + port2=`findfree 5970` # bridge port (viewer connects to it.) + N=`expr $port2 - 5900` + env PPROXY_REMOVE=0 PPROXY_SLEEP=0 PPROXY_VENCRYPT_VIEWER_BRIDGE="$port2,$port1" $ptmp & + sleep 1 + fi + echo "Running viewer:" + vnc_hp=$localhost:$N + if [ "X$stunnel_exec" != "X" ]; then + vnc_hp="exec=$STUNNEL $tmp_cfg" + fi + echo "$VNCVIEWERCMD" "$@" "$vnc_hp" + trap "final" 0 2 15 + echo "" + $VNCVIEWERCMD "$@" "$vnc_hp" + if [ $? != 0 ]; then + echo "vncviewer command failed: $?" + if [ "X$secondtry" = "X1" ]; then + sleep 2 + $VNCVIEWERCMD "$@" "$vnc_hp" + fi + fi +else + echo "Running viewer:" + echo "" + echo "NOTE: Press Ctrl-C to terminate viewer LISTEN mode." + echo "" + trap "final" 0 2 15 + N2=$N + N2_trim=`echo "$N2" | sed -e 's/://g'` + if [ $N2_trim -le 200 ]; then + N2_trim=`expr $N2_trim + 5500` + fi + if [ "X$proxy" != "X" ]; then + if echo "$proxy" | grep -i '^vencrypt:' > /dev/null; then + pstunnel=`echo "$proxy" | awk -F: '{print $2}'` + plisten=`echo "$proxy" | awk -F: '{print $3}'` + IF=INADDR_ANY + if [ "X$STUNNEL_LISTEN" != "X" ]; then + IF=$STUNNEL_LISTEN + fi + PPROXY_VENCRYPT_REVERSE=1; export PPROXY_VENCRYPT_REVERSE + PPROXY_LISTEN="$IF:$plisten"; export PPROXY_LISTEN + PPROXY_PROXY="vencrypt://$localhost:$pstunnel"; export PPROXY_PROXY + PPROXY_DEST="$localhost:$pstunnel"; export PPROXY_DEST + STUNNEL_ONCE=1; export STUNNEL_ONCE + STUNNEL_MAX_CLIENTS=1; export STUNNEL_MAX_CLIENTS + if [ "X$NEED_VENCRYPT_VIEWER_BRIDGE" = "X1" -a "X$ptmp" != "X" ] ; then + port1=`expr 5500 + $N2` + port2=`findfree 5580` + N2=`expr $port2 - 5500` + N2_trim=`echo "$N2" | sed -e 's/://g'` + if [ $N2_trim -le 200 ]; then + N2_trim=`expr $N2_trim + 5500` + fi + if [ "X$SSVNC_LISTEN_ONCE" != "X1" ]; then + PPROXY_LOOP_THYSELF=`mytmp "/tmp/pproxy_loop_thyself1.${RANDOM}.$$"` + export PPROXY_LOOP_THYSELF + PPROXY_LOOP_THYSELF0=$PPROXY_LOOP_THYSELF + fi + env PPROXY_REMOVE=0 PPROXY_SLEEP=0 PPROXY_VENCRYPT_VIEWER_BRIDGE="-$port1,$port2" $ptmp & + sleep 1 + fi + else + PPROXY_REVERSE="$localhost:$port"; export PPROXY_REVERSE + PPROXY_SLEEP=1; export PPROXY_SLEEP; + fi + PPROXY_KILLPID=+1; export PPROXY_KILLPID; + if [ "X$SSVNC_LISTEN_ONCE" != "X1" ]; then + PPROXY_LOOP_THYSELF=`mytmp "/tmp/pproxy_loop_thyself2.${RANDOM}.$$"` + export PPROXY_LOOP_THYSELF + fi + $ptmp & + # Important to have no extra pids generated between here and VNCVIEWERCMD + fi + if [ "X$VNCVIEWER_IS_REALVNC4" = "X1" ]; then + N2=$N2_trim + fi + echo "$VNCVIEWERCMD" "$@" -listen $N2 + echo "" + $VNCVIEWERCMD "$@" -listen $N2 + + if [ "X$PPROXY_LOOP_THYSELF" != "X" ]; then + rm -f $PPROXY_LOOP_THYSELF + fi + if [ "X$PPROXY_LOOP_THYSELF0" != "X" ]; then + rm -f $PPROXY_LOOP_THYSELF0 + fi +fi + +sleep 1 diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ultra.vnc b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ultra.vnc new file mode 100644 index 0000000..3c57445 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ultra.vnc @@ -0,0 +1,28 @@ + + + + +$USER's $DESKTOP desktop ($DISPLAY) + + + + + + +$PARAMS + +
+x11vnc site + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ultraproxy.vnc b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ultraproxy.vnc new file mode 100644 index 0000000..fd842c4 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ultraproxy.vnc @@ -0,0 +1,28 @@ + + + + +$USER's $DESKTOP desktop ($DISPLAY) + + + + + + +$PARAMS + +
+x11vnc site + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ultrasigned.vnc b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ultrasigned.vnc new file mode 100644 index 0000000..a711655 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/java-applet/ssl/ultrasigned.vnc @@ -0,0 +1,28 @@ + + + + +$USER's $DESKTOP desktop ($DISPLAY) + + + + + + +$PARAMS + +
+x11vnc site + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/LICENSE.txt b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/LICENSE.txt new file mode 100644 index 0000000..6a1131b --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/LICENSE.txt @@ -0,0 +1,35 @@ +noVNC is Copyright (C) 2011 Joel Martin + +Some portions of noVNC are copyright to their individual authors. +Please refer to the individual source files and/or to the noVNC commit +history: https://github.com/kanaka/noVNC/commits/master + +noVNC is licensed under the LGPL (GNU Lesser General Public License) +version 3 with the following exceptions (all LGPL-3 compatible): + + include/input.js : LGPL-2 or any later version + + include/base64.js : Dual GPL-2 or LGPL-2.1 + + include/des.js : Various BSD style licenses + + include/jsunzip.js : zlib/libpng license + + include/web-socket-js/ : New BSD license. Source code at + http://github.com/gimite/web-socket-js + + include/Orbitron* : SIL Open Font License 1.1 + (Copyright 2009 Matt McInerney) + + images/ : Creative Commons Attribution-ShareAlike + http://creativecommons.org/licenses/by-sa/3.0/ + +The license texts are included at: + docs/LICENSE.LGPL-3 and + docs/LICENSE.GPL-3 + docs/LICENSE.OFL-1.1 + +Or alternatively the license texts may be found here: + http://www.gnu.org/licenses/lgpl.html and + http://www.gnu.org/licenses/gpl.html + http://scripts.sil.org/OFL diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/README.md b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/README.md new file mode 100644 index 0000000..887c96c --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/README.md @@ -0,0 +1,102 @@ +## noVNC: HTML5 VNC Client + + +### Description + +noVNC is a HTML5 VNC client that runs well in any modern browser +including mobile browsers (iPhone/iPad and Android). + +Notable commits, announcements and news are posted to +@noVNC + +There are many companies/projects that have integrated noVNC into +their products including: [Ganeti Web Manager](http://code.osuosl.org/projects/ganeti-webmgr), [Archipel](http://archipelproject.org), [openQRM](http://www.openqrm.com/), [OpenNode](http://www.opennodecloud.com/), [OpenStack](http://www.openstack.org), [Broadway (HTML5 GDK/GTK+ backend)](http://blogs.gnome.org/alexl/2011/03/15/gtk-html-backend-update/), [OpenNebula](http://opennebula.org/), [CloudSigma](http://www.cloudsigma.com/), [Zentyal (formerly eBox)](http://www.zentyal.org/), [SlapOS](http://www.slapos.org), [Intel MeshCentral](https://meshcentral.com), [Amahi](http://amahi.org), [Brightbox](http://brightbox.com/), [Foreman](http://theforeman.org) and [LibVNCServer](http://libvncserver.sourceforge.net). See [this wiki page](https://github.com/kanaka/noVNC/wiki/ProjectsCompanies-using-noVNC) for more info and links. + + +### Features + +* Supports all modern browsers including mobile (iOS, Android) +* Supported VNC encodings: raw, copyrect, rre, hextile, tight, tightPNG +* WebSocket SSL/TLS encryption (i.e. "wss://") support +* 24-bit true color and 8 bit colour mapped +* Supports desktop resize notification/pseudo-encoding +* Local or remote cursor +* Clipboard copy/paste +* Clipping or scolling modes for large remote screens +* Easy site integration and theming (3 example themes included) +* Licensed under the [LGPLv3](http://www.gnu.org/licenses/lgpl.html) + +### Screenshots + +Running in Chrome before and after connecting: + +  + +See more screenshots here. + + +### Browser Requirements + +* HTML5 Canvas (with createImageData): Chrome, Firefox 3.6+, iOS + Safari, Opera 11+, Internet Explorer 9+, etc. + +* HTML5 WebSockets: For browsers that do not have builtin + WebSockets support, the project includes + web-socket-js, + a WebSockets emulator using Adobe Flash. iOS 4.2+ has built-in + WebSocket support. + +* Fast Javascript Engine: this is not strictly a requirement, but + without a fast Javascript engine, noVNC might be painfully slow. + +* I maintain a more detailed browser compatibility list here. + + +### Server Requirements + +Unless you are using a VNC server with support for WebSockets +connections (such as [x11vnc/libvncserver](http://libvncserver.sourceforge.net/)), +you need to use a WebSockets to TCP socket proxy. There is +a python proxy included ('websockify'). + + +### Quick Start + +* Use the launch script to start a mini-webserver and the WebSockets + proxy (websockify). The `--vnc` option is used to specify the location of + a running VNC server: + + `./utils/launch.sh --vnc localhost:5901` + +* Point your browser to the cut-and-paste URL that is output by the + launch script. Enter a password if the VNC server has one + configured. Hit the Connect button and enjoy! + + +### Other Pages + +* [Advanced Usage](https://github.com/kanaka/noVNC/wiki/Advanced-usage). Generating an SSL + certificate, starting a VNC server, advanced websockify usage, etc. + +* [Integrating noVNC](https://github.com/kanaka/noVNC/wiki/Integration) into existing projects. + +* [Troubleshooting noVNC](https://github.com/kanaka/noVNC/wiki/Troubleshooting) problems. + + +### Authors/Contributors + +* noVNC : Joel Martin (github.com/kanaka) + * New UI and Icons : Chris Gordon + * Original Logo : Michael Sersen + * tight encoding : Michael Tinglof (Mercuri.ca) + +* Included libraries: + * web-socket-js : Hiroshi Ichikawa (github.com/gimite/web-socket-js) + * as3crypto : Henri Torgemane (code.google.com/p/as3crypto) + * base64 : Martijn Pieters (Digital Creations 2), Samuel Sieb (sieb.net) + * jsunzip : Erik Moller (github.com/operasoftware/jsunzip), + * tinflate : Joergen Ibsen (ibsensoftware.com) + * DES : Dave Zimmerman (Widget Workshop), Jef Poskanzer (ACME Labs) + + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/favicon.ico b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/favicon.ico new file mode 100644 index 0000000..c999634 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/favicon.ico differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/clipboard.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/clipboard.png new file mode 100644 index 0000000..24df33c Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/clipboard.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/connect.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/connect.png new file mode 100644 index 0000000..79e71ad Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/connect.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/ctrlaltdel.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/ctrlaltdel.png new file mode 100644 index 0000000..31922e5 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/ctrlaltdel.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/disconnect.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/disconnect.png new file mode 100644 index 0000000..8832f5e Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/disconnect.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/drag.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/drag.png new file mode 100644 index 0000000..433f896 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/drag.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/favicon.ico b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/favicon.ico new file mode 100644 index 0000000..c999634 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/favicon.ico differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/favicon.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/favicon.png new file mode 100644 index 0000000..e2bdb19 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/favicon.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/keyboard.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/keyboard.png new file mode 100644 index 0000000..f797952 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/keyboard.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_left.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_left.png new file mode 100644 index 0000000..1de7a48 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_left.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_middle.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_middle.png new file mode 100644 index 0000000..81fbd9b Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_middle.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_none.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_none.png new file mode 100644 index 0000000..93dbf57 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_none.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_right.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_right.png new file mode 100644 index 0000000..355b25d Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/mouse_right.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/screen_320x460.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/screen_320x460.png new file mode 100644 index 0000000..172ec55 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/screen_320x460.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/screen_57x57.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/screen_57x57.png new file mode 100644 index 0000000..e2085f2 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/screen_57x57.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/screen_700x700.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/screen_700x700.png new file mode 100644 index 0000000..ae67768 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/screen_700x700.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/settings.png b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/settings.png new file mode 100644 index 0000000..a43f5e1 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/images/settings.png differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/Orbitron700.ttf b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/Orbitron700.ttf new file mode 100644 index 0000000..e28729d Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/Orbitron700.ttf differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/Orbitron700.woff b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/Orbitron700.woff new file mode 100644 index 0000000..61db630 Binary files /dev/null and b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/Orbitron700.woff differ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/base.css b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/base.css new file mode 100644 index 0000000..105984d --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/base.css @@ -0,0 +1,398 @@ +body { + margin:0; + padding:0; + font-family: Helvetica; + /*Background image with light grey curve.*/ + background-color:#494949; + background-repeat:no-repeat; + background-position:right bottom; + height:100%; +} + +html { + height:100%; +} + +#noVNC_controls ul { + list-style: none; + margin: 0px; + padding: 0px; +} +#noVNC_controls li { + padding-bottom:8px; +} + +#noVNC_host { + width:150px; +} +#noVNC_port { + width: 80px; +} +#noVNC_password { + width: 150px; +} +#noVNC_encrypt { +} +#noVNC_connectTimeout { + width: 30px; +} +#noVNC_path { + width: 100px; +} +#noVNC_connect_button { + width: 110px; + float:right; +} + + +#noVNC_view_drag_button { + display: none; +} +#sendCtrlAltDelButton { + display: none; +} +#noVNC_mobile_buttons { + display: none; +} + +.noVNC-buttons-left { + float: left; + padding-left:10px; + padding-top:4px; +} + +.noVNC-buttons-right { + float:right; + right: 0px; + padding-right:10px; + padding-top:4px; +} + +#noVNC_status_bar { + margin-top: 0px; + padding: 0px; +} + +#noVNC_status_bar div { + font-size: 12px; + padding-top: 4px; + width:100%; +} + +#noVNC_status { + height:20px; + text-align: center; +} +#noVNC_settings_menu { + margin: 3px; + text-align: left; +} +#noVNC_settings_menu ul { + list-style: none; + margin: 0px; + padding: 0px; +} + +#noVNC_apply { + float:right; +} + +.noVNC_status_normal { + background: #eee; +} +.noVNC_status_error { + background: #f44; +} +.noVNC_status_warn { + background: #ff4; +} + +/* Do not set width/height for VNC_screen or VNC_canvas or incorrect + * scaling will occur. Canvas resizes to remote VNC settings */ +#noVNC_screen_pad { + margin: 0px; + padding: 0px; + height: 44px; +} +#noVNC_screen { + text-align: center; + display: table; + width:100%; + height:100%; + background-color:#313131; + border-bottom-right-radius: 800px 600px; + /*border-top-left-radius: 800px 600px;*/ +} + +#noVNC_container, #noVNC_canvas { + margin: 0px; + padding: 0px; +} + +#noVNC_canvas { + left: 0px; +} + +#VNC_clipboard_clear_button { + float:right; +} +#VNC_clipboard_text { + font-size: 11px; +} + +#noVNC_clipboard_clear_button { + float:right; +} + +/*Bubble contents divs*/ +#noVNC_settings { + display:none; + margin-top:77px; + right:20px; + position:fixed; +} + +#noVNC_controls { + display:none; + margin-top:77px; + right:12px; + position:fixed; +} +#noVNC_controls.top:after { + right:15px; +} + +#noVNC_description { + display:none; + position:fixed; + + margin-top:77px; + right:20px; + left:20px; + padding:15px; + color:#000; + background:#eee; /* default background for browsers without gradient support */ + + border:2px solid #E0E0E0; + -webkit-border-radius:10px; + -moz-border-radius:10px; + border-radius:10px; +} + +#noVNC_clipboard { + display:none; + margin-top:77px; + right:30px; + position:fixed; +} +#noVNC_clipboard.top:after { + right:85px; +} + +#keyboardinput { + width:1px; + height:1px; + background-color:#fff; + color:#fff; + border:0; + position: relative; + left: -40px; + z-index: -1; +} + +.noVNC_status_warn { + background-color:yellow; +} + +/* + * Advanced Styling + */ + +/* Control bar */ +#noVNC-control-bar { + position:fixed; + background: #b2bdcd; /* Old browsers */ + background: -moz-linear-gradient(top, #b2bdcd 0%, #899cb3 49%, #7e93af 51%, #6e84a3 100%); /* FF3.6+ */ + background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,#b2bdcd), color-stop(49%,#899cb3), color-stop(51%,#7e93af), color-stop(100%,#6e84a3)); /* Chrome,Safari4+ */ + background: -webkit-linear-gradient(top, #b2bdcd 0%,#899cb3 49%,#7e93af 51%,#6e84a3 100%); /* Chrome10+,Safari5.1+ */ + background: -o-linear-gradient(top, #b2bdcd 0%,#899cb3 49%,#7e93af 51%,#6e84a3 100%); /* Opera11.10+ */ + background: -ms-linear-gradient(top, #b2bdcd 0%,#899cb3 49%,#7e93af 51%,#6e84a3 100%); /* IE10+ */ + background: linear-gradient(top, #b2bdcd 0%,#899cb3 49%,#7e93af 51%,#6e84a3 100%); /* W3C */ + + display:block; + height:44px; + left:0; + top:0; + width:100%; + z-index:200; +} + +.noVNC_status_button { + padding: 4px 4px; + vertical-align: middle; + border:1px solid #869dbc; + -webkit-border-radius: 6px; + -moz-border-radius: 6px; + border-radius: 6px; + background: #b2bdcd; /* Old browsers */ + background: -moz-linear-gradient(top, #b2bdcd 0%, #899cb3 49%, #7e93af 51%, #6e84a3 100%); /* FF3.6+ */ + background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,#b2bdcd), color-stop(49%,#899cb3), color-stop(51%,#7e93af), color-stop(100%,#6e84a3)); /* Chrome,Safari4+ */ + background: -webkit-linear-gradient(top, #b2bdcd 0%,#899cb3 49%,#7e93af 51%,#6e84a3 100%); /* Chrome10+,Safari5.1+ */ + background: -o-linear-gradient(top, #b2bdcd 0%,#899cb3 49%,#7e93af 51%,#6e84a3 100%); /* Opera11.10+ */ + background: -ms-linear-gradient(top, #b2bdcd 0%,#899cb3 49%,#7e93af 51%,#6e84a3 100%); /* IE10+ */ + filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#b2bdcd', endColorstr='#6e84a3',GradientType=0 ); /* IE6-9 */ + background: linear-gradient(top, #b2bdcd 0%,#899cb3 49%,#7e93af 51%,#6e84a3 100%); /* W3C */ + /*box-shadow:inset 0.4px 0.4px 0.4px #000000;*/ +} + +.noVNC_status_button_selected { + padding: 4px 4px; + vertical-align: middle; + border:1px solid #4366a9; + -webkit-border-radius: 6px; + -moz-border-radius: 6px; + background: #779ced; /* Old browsers */ + background: -moz-linear-gradient(top, #779ced 0%, #3970e0 49%, #2160dd 51%, #2463df 100%); /* FF3.6+ */ + background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,#779ced), color-stop(49%,#3970e0), color-stop(51%,#2160dd), color-stop(100%,#2463df)); /* Chrome,Safari4+ */ + background: -webkit-linear-gradient(top, #779ced 0%,#3970e0 49%,#2160dd 51%,#2463df 100%); /* Chrome10+,Safari5.1+ */ + background: -o-linear-gradient(top, #779ced 0%,#3970e0 49%,#2160dd 51%,#2463df 100%); /* Opera11.10+ */ + background: -ms-linear-gradient(top, #779ced 0%,#3970e0 49%,#2160dd 51%,#2463df 100%); /* IE10+ */ + filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#779ced', endColorstr='#2463df',GradientType=0 ); /* IE6-9 */ + background: linear-gradient(top, #779ced 0%,#3970e0 49%,#2160dd 51%,#2463df 100%); /* W3C */ + /*box-shadow:inset 0.4px 0.4px 0.4px #000000;*/ +} + + +/*Settings Bubble*/ +.triangle-right { + position:relative; + padding:15px; + margin:1em 0 3em; + color:#fff; + background:#fff; /* default background for browsers without gradient support */ + /* css3 */ + /*background:-webkit-gradient(linear, 0 0, 0 100%, from(#2e88c4), to(#075698)); + background:-moz-linear-gradient(#2e88c4, #075698); + background:-o-linear-gradient(#2e88c4, #075698); + background:linear-gradient(#2e88c4, #075698);*/ + -webkit-border-radius:10px; + -moz-border-radius:10px; + border-radius:10px; + color:#000; + border:2px solid #E0E0E0; +} + +.triangle-right.top:after { + border-color: transparent #E0E0E0; + border-width: 20px 20px 0 0; + bottom: auto; + left: auto; + right: 50px; + top: -20px; +} + +.triangle-right:after { + content:""; + position:absolute; + bottom:-20px; /* value = - border-top-width - border-bottom-width */ + left:50px; /* controls horizontal position */ + border-width:20px 0 0 20px; /* vary these values to change the angle of the vertex */ + border-style:solid; + border-color:#E0E0E0 transparent; + /* reduce the damage in FF3.0 */ + display:block; + width:0; +} + +.triangle-right.top:after { + top:-40px; /* value = - border-top-width - border-bottom-width */ + right:50px; /* controls horizontal position */ + bottom:auto; + left:auto; + border-width:40px 40px 0 0; /* vary these values to change the angle of the vertex */ + border-color:transparent #E0E0E0; +} + +/*Default noVNC logo.*/ +/* From: http://fonts.googleapis.com/css?family=Orbitron:700 */ +@font-face { + font-family: 'Orbitron'; + font-style: normal; + font-weight: 700; + src: local('?'), url('Orbitron700.woff') format('woff'), + url('Orbitron700.ttf') format('truetype'); +} + +#noVNC_logo { + margin-top: 170px; + margin-left: 10px; + color:yellow; + text-align:left; + font-family: 'Orbitron', 'OrbitronTTF', sans-serif; + line-height:90%; + text-shadow: + 5px 5px 0 #000, + -1px -1px 0 #000, + 1px -1px 0 #000, + -1px 1px 0 #000, + 1px 1px 0 #000; +} + + +#noVNC_logo span{ + color:green; +} + +/* ---------------------------------------- + * Media sizing + * ---------------------------------------- + */ + + +.noVNC_status_button { + font-size: 12px; +} + +#noVNC_clipboard_text { + width: 500px; +} + +#noVNC_logo { + font-size: 180px; +} + +@media screen and (min-width: 481px) and (max-width: 640px) { + .noVNC_status_button { + font-size: 10px; + } + #noVNC_clipboard_text { + width: 410px; + } + #noVNC_logo { + font-size: 150px; + } +} + +@media screen and (min-width: 321px) and (max-width: 480px) { + .noVNC_status_button { + font-size: 10px; + } + #noVNC_clipboard_text { + width: 250px; + } + #noVNC_logo { + font-size: 110px; + } +} + +@media screen and (max-width: 320px) { + .noVNC_status_button { + font-size: 9px; + } + #noVNC_clipboard_text { + width: 220px; + } + #noVNC_logo { + font-size: 90px; + } +} diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/base64.js b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/base64.js new file mode 100644 index 0000000..e9b3c52 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/base64.js @@ -0,0 +1,147 @@ +/* + * Modified from: + * http://lxr.mozilla.org/mozilla/source/extensions/xml-rpc/src/nsXmlRpcClient.js#956 + */ + +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is Mozilla XML-RPC Client component. + * + * The Initial Developer of the Original Code is + * Digital Creations 2, Inc. + * Portions created by the Initial Developer are Copyright (C) 2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * Martijn Pieters (original author) + * Samuel Sieb + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/*jslint white: false, bitwise: false, plusplus: false */ +/*global console */ + +var Base64 = { + +/* Convert data (an array of integers) to a Base64 string. */ +toBase64Table : 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/', +base64Pad : '=', + +encode: function (data) { + "use strict"; + var result = '', + chrTable = Base64.toBase64Table.split(''), + pad = Base64.base64Pad, + length = data.length, + i; + // Convert every three bytes to 4 ascii characters. + for (i = 0; i < (length - 2); i += 3) { + result += chrTable[data[i] >> 2]; + result += chrTable[((data[i] & 0x03) << 4) + (data[i+1] >> 4)]; + result += chrTable[((data[i+1] & 0x0f) << 2) + (data[i+2] >> 6)]; + result += chrTable[data[i+2] & 0x3f]; + } + + // Convert the remaining 1 or 2 bytes, pad out to 4 characters. + if (length%3) { + i = length - (length%3); + result += chrTable[data[i] >> 2]; + if ((length%3) === 2) { + result += chrTable[((data[i] & 0x03) << 4) + (data[i+1] >> 4)]; + result += chrTable[(data[i+1] & 0x0f) << 2]; + result += pad; + } else { + result += chrTable[(data[i] & 0x03) << 4]; + result += pad + pad; + } + } + + return result; +}, + +/* Convert Base64 data to a string */ +toBinaryTable : [ + -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1, + -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,-1, + -1,-1,-1,-1, -1,-1,-1,-1, -1,-1,-1,62, -1,-1,-1,63, + 52,53,54,55, 56,57,58,59, 60,61,-1,-1, -1, 0,-1,-1, + -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11,12,13,14, + 15,16,17,18, 19,20,21,22, 23,24,25,-1, -1,-1,-1,-1, + -1,26,27,28, 29,30,31,32, 33,34,35,36, 37,38,39,40, + 41,42,43,44, 45,46,47,48, 49,50,51,-1, -1,-1,-1,-1 +], + +decode: function (data, offset) { + "use strict"; + offset = typeof(offset) !== 'undefined' ? offset : 0; + var binTable = Base64.toBinaryTable, + pad = Base64.base64Pad, + result, result_length, idx, i, c, padding, + leftbits = 0, // number of bits decoded, but yet to be appended + leftdata = 0, // bits decoded, but yet to be appended + data_length = data.indexOf('=') - offset; + + if (data_length < 0) { data_length = data.length - offset; } + + /* Every four characters is 3 resulting numbers */ + result_length = (data_length >> 2) * 3 + Math.floor((data_length%4)/1.5); + result = new Array(result_length); + + // Convert one by one. + for (idx = 0, i = offset; i < data.length; i++) { + c = binTable[data.charCodeAt(i) & 0x7f]; + padding = (data.charAt(i) === pad); + // Skip illegal characters and whitespace + if (c === -1) { + console.error("Illegal character code " + data.charCodeAt(i) + " at position " + i); + continue; + } + + // Collect data into leftdata, update bitcount + leftdata = (leftdata << 6) | c; + leftbits += 6; + + // If we have 8 or more bits, append 8 bits to the result + if (leftbits >= 8) { + leftbits -= 8; + // Append if not padding. + if (!padding) { + result[idx++] = (leftdata >> leftbits) & 0xff; + } + leftdata &= (1 << leftbits) - 1; + } + } + + // If there are any bits left, the base64 string was corrupted + if (leftbits) { + throw {name: 'Base64-Error', + message: 'Corrupted base64 string'}; + } + + return result; +} + +}; /* End of Base64 namespace */ diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/black.css b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/black.css new file mode 100644 index 0000000..8f80f66 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/black.css @@ -0,0 +1,45 @@ +#keyboardinput { + background-color:#000; +} + +#noVNC-control-bar { + background: #4c4c4c; /* Old browsers */ + background: -moz-linear-gradient(top, #4c4c4c 0%, #2c2c2c 50%, #000000 51%, #131313 100%); /* FF3.6+ */ + background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,#4c4c4c), color-stop(50%,#2c2c2c), color-stop(51%,#000000), color-stop(100%,#131313)); /* Chrome,Safari4+ */ + background: -webkit-linear-gradient(top, #4c4c4c 0%,#2c2c2c 50%,#000000 51%,#131313 100%); /* Chrome10+,Safari5.1+ */ + background: -o-linear-gradient(top, #4c4c4c 0%,#2c2c2c 50%,#000000 51%,#131313 100%); /* Opera11.10+ */ + background: -ms-linear-gradient(top, #4c4c4c 0%,#2c2c2c 50%,#000000 51%,#131313 100%); /* IE10+ */ + background: linear-gradient(top, #4c4c4c 0%,#2c2c2c 50%,#000000 51%,#131313 100%); /* W3C */ +} + +.triangle-right { + border:2px solid #fff; + background:#000; + color:#fff; +} + +.noVNC_status_button { + font-size: 12px; + vertical-align: middle; + border:1px solid #4c4c4c; + + background: #4c4c4c; /* Old browsers */ + background: -moz-linear-gradient(top, #4c4c4c 0%, #2c2c2c 50%, #000000 51%, #131313 100%); /* FF3.6+ */ + background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,#4c4c4c), color-stop(50%,#2c2c2c), color-stop(51%,#000000), color-stop(100%,#131313)); /* Chrome,Safari4+ */ + background: -webkit-linear-gradient(top, #4c4c4c 0%,#2c2c2c 50%,#000000 51%,#131313 100%); /* Chrome10+,Safari5.1+ */ + background: -o-linear-gradient(top, #4c4c4c 0%,#2c2c2c 50%,#000000 51%,#131313 100%); /* Opera11.10+ */ + background: -ms-linear-gradient(top, #4c4c4c 0%,#2c2c2c 50%,#000000 51%,#131313 100%); /* IE10+ */ + filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#4c4c4c', endColorstr='#131313',GradientType=0 ); /* IE6-9 */ + background: linear-gradient(top, #4c4c4c 0%,#2c2c2c 50%,#000000 51%,#131313 100%); /* W3C */ +} + +.noVNC_status_button_selected { + background: #9dd53a; /* Old browsers */ + background: -moz-linear-gradient(top, #9dd53a 0%, #a1d54f 50%, #80c217 51%, #7cbc0a 100%); /* FF3.6+ */ + background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,#9dd53a), color-stop(50%,#a1d54f), color-stop(51%,#80c217), color-stop(100%,#7cbc0a)); /* Chrome,Safari4+ */ + background: -webkit-linear-gradient(top, #9dd53a 0%,#a1d54f 50%,#80c217 51%,#7cbc0a 100%); /* Chrome10+,Safari5.1+ */ + background: -o-linear-gradient(top, #9dd53a 0%,#a1d54f 50%,#80c217 51%,#7cbc0a 100%); /* Opera11.10+ */ + background: -ms-linear-gradient(top, #9dd53a 0%,#a1d54f 50%,#80c217 51%,#7cbc0a 100%); /* IE10+ */ + filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#9dd53a', endColorstr='#7cbc0a',GradientType=0 ); /* IE6-9 */ + background: linear-gradient(top, #9dd53a 0%,#a1d54f 50%,#80c217 51%,#7cbc0a 100%); /* W3C */ +} diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/blue.css b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/blue.css new file mode 100644 index 0000000..a8baf70 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/blue.css @@ -0,0 +1,27 @@ + +#noVNC-control-bar { + background-color:#04073d; + background-image: -webkit-gradient( + linear, + left bottom, + left top, + color-stop(0.54, rgb(10,15,79)), + color-stop(0.5, rgb(4,7,61)) + ); + background-image: -moz-linear-gradient( + center bottom, + rgb(10,15,79) 54%, + rgb(4,7,61) 50% + ); +} + +.triangle-right { + border:2px solid #fff; + background:#04073d; + color:#fff; +} + +#keyboardinput { + background-color:#04073d; +} + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/des.js b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/des.js new file mode 100644 index 0000000..1f95285 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/des.js @@ -0,0 +1,273 @@ +/* + * Ported from Flashlight VNC ActionScript implementation: + * http://www.wizhelp.com/flashlight-vnc/ + * + * Full attribution follows: + * + * ------------------------------------------------------------------------- + * + * This DES class has been extracted from package Acme.Crypto for use in VNC. + * The unnecessary odd parity code has been removed. + * + * These changes are: + * Copyright (C) 1999 AT&T Laboratories Cambridge. All Rights Reserved. + * + * This software is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + + * DesCipher - the DES encryption method + * + * The meat of this code is by Dave Zimmerman , and is: + * + * Copyright (c) 1996 Widget Workshop, Inc. All Rights Reserved. + * + * Permission to use, copy, modify, and distribute this software + * and its documentation for NON-COMMERCIAL or COMMERCIAL purposes and + * without fee is hereby granted, provided that this copyright notice is kept + * intact. + * + * WIDGET WORKSHOP MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE SUITABILITY + * OF THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED + * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE, OR NON-INFRINGEMENT. WIDGET WORKSHOP SHALL NOT BE LIABLE + * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR + * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. + * + * THIS SOFTWARE IS NOT DESIGNED OR INTENDED FOR USE OR RESALE AS ON-LINE + * CONTROL EQUIPMENT IN HAZARDOUS ENVIRONMENTS REQUIRING FAIL-SAFE + * PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT + * NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, DIRECT LIFE + * SUPPORT MACHINES, OR WEAPONS SYSTEMS, IN WHICH THE FAILURE OF THE + * SOFTWARE COULD LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE + * PHYSICAL OR ENVIRONMENTAL DAMAGE ("HIGH RISK ACTIVITIES"). WIDGET WORKSHOP + * SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR + * HIGH RISK ACTIVITIES. + * + * + * The rest is: + * + * Copyright (C) 1996 by Jef Poskanzer . All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Visit the ACME Labs Java page for up-to-date versions of this and other + * fine Java utilities: http://www.acme.com/java/ + */ + +"use strict"; +/*jslint white: false, bitwise: false, plusplus: false */ + +function DES(passwd) { + +// Tables, permutations, S-boxes, etc. +var PC2 = [13,16,10,23, 0, 4, 2,27,14, 5,20, 9,22,18,11, 3, + 25, 7,15, 6,26,19,12, 1,40,51,30,36,46,54,29,39, + 50,44,32,47,43,48,38,55,33,52,45,41,49,35,28,31 ], + totrot = [ 1, 2, 4, 6, 8,10,12,14,15,17,19,21,23,25,27,28], + z = 0x0, a,b,c,d,e,f, SP1,SP2,SP3,SP4,SP5,SP6,SP7,SP8, + keys = []; + +a=1<<16; b=1<<24; c=a|b; d=1<<2; e=1<<10; f=d|e; +SP1 = [c|e,z|z,a|z,c|f,c|d,a|f,z|d,a|z,z|e,c|e,c|f,z|e,b|f,c|d,b|z,z|d, + z|f,b|e,b|e,a|e,a|e,c|z,c|z,b|f,a|d,b|d,b|d,a|d,z|z,z|f,a|f,b|z, + a|z,c|f,z|d,c|z,c|e,b|z,b|z,z|e,c|d,a|z,a|e,b|d,z|e,z|d,b|f,a|f, + c|f,a|d,c|z,b|f,b|d,z|f,a|f,c|e,z|f,b|e,b|e,z|z,a|d,a|e,z|z,c|d]; +a=1<<20; b=1<<31; c=a|b; d=1<<5; e=1<<15; f=d|e; +SP2 = [c|f,b|e,z|e,a|f,a|z,z|d,c|d,b|f,b|d,c|f,c|e,b|z,b|e,a|z,z|d,c|d, + a|e,a|d,b|f,z|z,b|z,z|e,a|f,c|z,a|d,b|d,z|z,a|e,z|f,c|e,c|z,z|f, + z|z,a|f,c|d,a|z,b|f,c|z,c|e,z|e,c|z,b|e,z|d,c|f,a|f,z|d,z|e,b|z, + z|f,c|e,a|z,b|d,a|d,b|f,b|d,a|d,a|e,z|z,b|e,z|f,b|z,c|d,c|f,a|e]; +a=1<<17; b=1<<27; c=a|b; d=1<<3; e=1<<9; f=d|e; +SP3 = [z|f,c|e,z|z,c|d,b|e,z|z,a|f,b|e,a|d,b|d,b|d,a|z,c|f,a|d,c|z,z|f, + b|z,z|d,c|e,z|e,a|e,c|z,c|d,a|f,b|f,a|e,a|z,b|f,z|d,c|f,z|e,b|z, + c|e,b|z,a|d,z|f,a|z,c|e,b|e,z|z,z|e,a|d,c|f,b|e,b|d,z|e,z|z,c|d, + b|f,a|z,b|z,c|f,z|d,a|f,a|e,b|d,c|z,b|f,z|f,c|z,a|f,z|d,c|d,a|e]; +a=1<<13; b=1<<23; c=a|b; d=1<<0; e=1<<7; f=d|e; +SP4 = [c|d,a|f,a|f,z|e,c|e,b|f,b|d,a|d,z|z,c|z,c|z,c|f,z|f,z|z,b|e,b|d, + z|d,a|z,b|z,c|d,z|e,b|z,a|d,a|e,b|f,z|d,a|e,b|e,a|z,c|e,c|f,z|f, + b|e,b|d,c|z,c|f,z|f,z|z,z|z,c|z,a|e,b|e,b|f,z|d,c|d,a|f,a|f,z|e, + c|f,z|f,z|d,a|z,b|d,a|d,c|e,b|f,a|d,a|e,b|z,c|d,z|e,b|z,a|z,c|e]; +a=1<<25; b=1<<30; c=a|b; d=1<<8; e=1<<19; f=d|e; +SP5 = [z|d,a|f,a|e,c|d,z|e,z|d,b|z,a|e,b|f,z|e,a|d,b|f,c|d,c|e,z|f,b|z, + a|z,b|e,b|e,z|z,b|d,c|f,c|f,a|d,c|e,b|d,z|z,c|z,a|f,a|z,c|z,z|f, + z|e,c|d,z|d,a|z,b|z,a|e,c|d,b|f,a|d,b|z,c|e,a|f,b|f,z|d,a|z,c|e, + c|f,z|f,c|z,c|f,a|e,z|z,b|e,c|z,z|f,a|d,b|d,z|e,z|z,b|e,a|f,b|d]; +a=1<<22; b=1<<29; c=a|b; d=1<<4; e=1<<14; f=d|e; +SP6 = [b|d,c|z,z|e,c|f,c|z,z|d,c|f,a|z,b|e,a|f,a|z,b|d,a|d,b|e,b|z,z|f, + z|z,a|d,b|f,z|e,a|e,b|f,z|d,c|d,c|d,z|z,a|f,c|e,z|f,a|e,c|e,b|z, + b|e,z|d,c|d,a|e,c|f,a|z,z|f,b|d,a|z,b|e,b|z,z|f,b|d,c|f,a|e,c|z, + a|f,c|e,z|z,c|d,z|d,z|e,c|z,a|f,z|e,a|d,b|f,z|z,c|e,b|z,a|d,b|f]; +a=1<<21; b=1<<26; c=a|b; d=1<<1; e=1<<11; f=d|e; +SP7 = [a|z,c|d,b|f,z|z,z|e,b|f,a|f,c|e,c|f,a|z,z|z,b|d,z|d,b|z,c|d,z|f, + b|e,a|f,a|d,b|e,b|d,c|z,c|e,a|d,c|z,z|e,z|f,c|f,a|e,z|d,b|z,a|e, + b|z,a|e,a|z,b|f,b|f,c|d,c|d,z|d,a|d,b|z,b|e,a|z,c|e,z|f,a|f,c|e, + z|f,b|d,c|f,c|z,a|e,z|z,z|d,c|f,z|z,a|f,c|z,z|e,b|d,b|e,z|e,a|d]; +a=1<<18; b=1<<28; c=a|b; d=1<<6; e=1<<12; f=d|e; +SP8 = [b|f,z|e,a|z,c|f,b|z,b|f,z|d,b|z,a|d,c|z,c|f,a|e,c|e,a|f,z|e,z|d, + c|z,b|d,b|e,z|f,a|e,a|d,c|d,c|e,z|f,z|z,z|z,c|d,b|d,b|e,a|f,a|z, + a|f,a|z,c|e,z|e,z|d,c|d,z|e,a|f,b|e,z|d,b|d,c|z,c|d,b|z,a|z,b|f, + z|z,c|f,a|d,b|d,c|z,b|e,b|f,z|z,c|f,a|e,a|e,z|f,z|f,a|d,b|z,c|e]; + +// Set the key. +function setKeys(keyBlock) { + var i, j, l, m, n, o, pc1m = [], pcr = [], kn = [], + raw0, raw1, rawi, KnLi; + + for (j = 0, l = 56; j < 56; ++j, l-=8) { + l += l<-5 ? 65 : l<-3 ? 31 : l<-1 ? 63 : l===27 ? 35 : 0; // PC1 + m = l & 0x7; + pc1m[j] = ((keyBlock[l >>> 3] & (1<>> 10; + keys[KnLi] |= (raw1 & 0x00000fc0) >>> 6; + ++KnLi; + keys[KnLi] = (raw0 & 0x0003f000) << 12; + keys[KnLi] |= (raw0 & 0x0000003f) << 16; + keys[KnLi] |= (raw1 & 0x0003f000) >>> 4; + keys[KnLi] |= (raw1 & 0x0000003f); + ++KnLi; + } +} + +// Encrypt 8 bytes of text +function enc8(text) { + var i = 0, b = text.slice(), fval, keysi = 0, + l, r, x; // left, right, accumulator + + // Squash 8 bytes to 2 ints + l = b[i++]<<24 | b[i++]<<16 | b[i++]<<8 | b[i++]; + r = b[i++]<<24 | b[i++]<<16 | b[i++]<<8 | b[i++]; + + x = ((l >>> 4) ^ r) & 0x0f0f0f0f; + r ^= x; + l ^= (x << 4); + x = ((l >>> 16) ^ r) & 0x0000ffff; + r ^= x; + l ^= (x << 16); + x = ((r >>> 2) ^ l) & 0x33333333; + l ^= x; + r ^= (x << 2); + x = ((r >>> 8) ^ l) & 0x00ff00ff; + l ^= x; + r ^= (x << 8); + r = (r << 1) | ((r >>> 31) & 1); + x = (l ^ r) & 0xaaaaaaaa; + l ^= x; + r ^= x; + l = (l << 1) | ((l >>> 31) & 1); + + for (i = 0; i < 8; ++i) { + x = (r << 28) | (r >>> 4); + x ^= keys[keysi++]; + fval = SP7[x & 0x3f]; + fval |= SP5[(x >>> 8) & 0x3f]; + fval |= SP3[(x >>> 16) & 0x3f]; + fval |= SP1[(x >>> 24) & 0x3f]; + x = r ^ keys[keysi++]; + fval |= SP8[x & 0x3f]; + fval |= SP6[(x >>> 8) & 0x3f]; + fval |= SP4[(x >>> 16) & 0x3f]; + fval |= SP2[(x >>> 24) & 0x3f]; + l ^= fval; + x = (l << 28) | (l >>> 4); + x ^= keys[keysi++]; + fval = SP7[x & 0x3f]; + fval |= SP5[(x >>> 8) & 0x3f]; + fval |= SP3[(x >>> 16) & 0x3f]; + fval |= SP1[(x >>> 24) & 0x3f]; + x = l ^ keys[keysi++]; + fval |= SP8[x & 0x0000003f]; + fval |= SP6[(x >>> 8) & 0x3f]; + fval |= SP4[(x >>> 16) & 0x3f]; + fval |= SP2[(x >>> 24) & 0x3f]; + r ^= fval; + } + + r = (r << 31) | (r >>> 1); + x = (l ^ r) & 0xaaaaaaaa; + l ^= x; + r ^= x; + l = (l << 31) | (l >>> 1); + x = ((l >>> 8) ^ r) & 0x00ff00ff; + r ^= x; + l ^= (x << 8); + x = ((l >>> 2) ^ r) & 0x33333333; + r ^= x; + l ^= (x << 2); + x = ((r >>> 16) ^ l) & 0x0000ffff; + l ^= x; + r ^= (x << 16); + x = ((r >>> 4) ^ l) & 0x0f0f0f0f; + l ^= x; + r ^= (x << 4); + + // Spread ints to bytes + x = [r, l]; + for (i = 0; i < 8; i++) { + b[i] = (x[i>>>2] >>> (8*(3 - (i%4)))) % 256; + if (b[i] < 0) { b[i] += 256; } // unsigned + } + return b; +} + +// Encrypt 16 bytes of text using passwd as key +function encrypt(t) { + return enc8(t.slice(0,8)).concat(enc8(t.slice(8,16))); +} + +setKeys(passwd); // Setup keys +return {'encrypt': encrypt}; // Public interface + +} // function DES diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/display.js b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/display.js new file mode 100644 index 0000000..f2ecdba --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/display.js @@ -0,0 +1,700 @@ +/* + * noVNC: HTML5 VNC client + * Copyright (C) 2011 Joel Martin + * Licensed under LGPL-3 (see LICENSE.txt) + * + * See README.md for usage and integration instructions. + */ + +/*jslint browser: true, white: false, bitwise: false */ +/*global Util, Base64, changeCursor */ + +function Display(defaults) { +"use strict"; + +var that = {}, // Public API methods + conf = {}, // Configuration attributes + + // Private Display namespace variables + c_ctx = null, + c_forceCanvas = false, + + // Predefine function variables (jslint) + imageDataGet, rgbImageData, bgrxImageData, cmapImageData, + setFillColor, rescale, + + // The full frame buffer (logical canvas) size + fb_width = 0, + fb_height = 0, + // The visible "physical canvas" viewport + viewport = {'x': 0, 'y': 0, 'w' : 0, 'h' : 0 }, + cleanRect = {'x1': 0, 'y1': 0, 'x2': -1, 'y2': -1}, + + c_prevStyle = "", + tile = null, + tile16x16 = null, + tile_x = 0, + tile_y = 0; + + +// Configuration attributes +Util.conf_defaults(conf, that, defaults, [ + ['target', 'wo', 'dom', null, 'Canvas element for rendering'], + ['context', 'ro', 'raw', null, 'Canvas 2D context for rendering (read-only)'], + ['logo', 'rw', 'raw', null, 'Logo to display when cleared: {"width": width, "height": height, "data": data}'], + ['true_color', 'rw', 'bool', true, 'Use true-color pixel data'], + ['colourMap', 'rw', 'arr', [], 'Colour map array (when not true-color)'], + ['scale', 'rw', 'float', 1.0, 'Display area scale factor 0.0 - 1.0'], + ['viewport', 'rw', 'bool', false, 'Use a viewport set with viewportChange()'], + ['width', 'rw', 'int', null, 'Display area width'], + ['height', 'rw', 'int', null, 'Display area height'], + + ['render_mode', 'ro', 'str', '', 'Canvas rendering mode (read-only)'], + + ['prefer_js', 'rw', 'str', null, 'Prefer Javascript over canvas methods'], + ['cursor_uri', 'rw', 'raw', null, 'Can we render cursor using data URI'] + ]); + +// Override some specific getters/setters +that.get_context = function () { return c_ctx; }; + +that.set_scale = function(scale) { rescale(scale); }; + +that.set_width = function (val) { that.resize(val, fb_height); }; +that.get_width = function() { return fb_width; }; + +that.set_height = function (val) { that.resize(fb_width, val); }; +that.get_height = function() { return fb_height; }; + + + +// +// Private functions +// + +// Create the public API interface +function constructor() { + Util.Debug(">> Display.constructor"); + + var c, func, i, curDat, curSave, + has_imageData = false, UE = Util.Engine; + + if (! conf.target) { throw("target must be set"); } + + if (typeof conf.target === 'string') { + throw("target must be a DOM element"); + } + + c = conf.target; + + if (! c.getContext) { throw("no getContext method"); } + + if (! c_ctx) { c_ctx = c.getContext('2d'); } + + Util.Debug("User Agent: " + navigator.userAgent); + if (UE.gecko) { Util.Debug("Browser: gecko " + UE.gecko); } + if (UE.webkit) { Util.Debug("Browser: webkit " + UE.webkit); } + if (UE.trident) { Util.Debug("Browser: trident " + UE.trident); } + if (UE.presto) { Util.Debug("Browser: presto " + UE.presto); } + + that.clear(); + + // Check canvas features + if ('createImageData' in c_ctx) { + conf.render_mode = "canvas rendering"; + } else { + throw("Canvas does not support createImageData"); + } + if (conf.prefer_js === null) { + Util.Info("Prefering javascript operations"); + conf.prefer_js = true; + } + + // Initialize cached tile imageData + tile16x16 = c_ctx.createImageData(16, 16); + + /* + * Determine browser support for setting the cursor via data URI + * scheme + */ + curDat = []; + for (i=0; i < 8 * 8 * 4; i += 1) { + curDat.push(255); + } + try { + curSave = c.style.cursor; + changeCursor(conf.target, curDat, curDat, 2, 2, 8, 8); + if (c.style.cursor) { + if (conf.cursor_uri === null) { + conf.cursor_uri = true; + } + Util.Info("Data URI scheme cursor supported"); + } else { + if (conf.cursor_uri === null) { + conf.cursor_uri = false; + } + Util.Warn("Data URI scheme cursor not supported"); + } + c.style.cursor = curSave; + } catch (exc2) { + Util.Error("Data URI scheme cursor test exception: " + exc2); + conf.cursor_uri = false; + } + + Util.Debug("<< Display.constructor"); + return that ; +} + +rescale = function(factor) { + var c, tp, x, y, + properties = ['transform', 'WebkitTransform', 'MozTransform', null]; + c = conf.target; + tp = properties.shift(); + while (tp) { + if (typeof c.style[tp] !== 'undefined') { + break; + } + tp = properties.shift(); + } + + if (tp === null) { + Util.Debug("No scaling support"); + return; + } + + + if (typeof(factor) === "undefined") { + factor = conf.scale; + } else if (factor > 1.0) { + factor = 1.0; + } else if (factor < 0.1) { + factor = 0.1; + } + + if (conf.scale === factor) { + //Util.Debug("Display already scaled to '" + factor + "'"); + return; + } + + conf.scale = factor; + x = c.width - c.width * factor; + y = c.height - c.height * factor; + c.style[tp] = "scale(" + conf.scale + ") translate(-" + x + "px, -" + y + "px)"; +}; + +setFillColor = function(color) { + var bgr, newStyle; + if (conf.true_color) { + bgr = color; + } else { + bgr = conf.colourMap[color[0]]; + } + newStyle = "rgb(" + bgr[2] + "," + bgr[1] + "," + bgr[0] + ")"; + if (newStyle !== c_prevStyle) { + c_ctx.fillStyle = newStyle; + c_prevStyle = newStyle; + } +}; + + +// +// Public API interface functions +// + +// Shift and/or resize the visible viewport +that.viewportChange = function(deltaX, deltaY, width, height) { + var c = conf.target, v = viewport, cr = cleanRect, + saveImg = null, saveStyle, x1, y1, vx2, vy2, w, h; + + if (!conf.viewport) { + Util.Debug("Setting viewport to full display region"); + deltaX = -v.w; // Clamped later if out of bounds + deltaY = -v.h; // Clamped later if out of bounds + width = fb_width; + height = fb_height; + } + + if (typeof(deltaX) === "undefined") { deltaX = 0; } + if (typeof(deltaY) === "undefined") { deltaY = 0; } + if (typeof(width) === "undefined") { width = v.w; } + if (typeof(height) === "undefined") { height = v.h; } + + // Size change + + if (width > fb_width) { width = fb_width; } + if (height > fb_height) { height = fb_height; } + + if ((v.w !== width) || (v.h !== height)) { + // Change width + if ((width < v.w) && (cr.x2 > v.x + width -1)) { + cr.x2 = v.x + width - 1; + } + v.w = width; + + // Change height + if ((height < v.h) && (cr.y2 > v.y + height -1)) { + cr.y2 = v.y + height - 1; + } + v.h = height; + + + if (v.w > 0 && v.h > 0 && c.width > 0 && c.height > 0) { + saveImg = c_ctx.getImageData(0, 0, + (c.width < v.w) ? c.width : v.w, + (c.height < v.h) ? c.height : v.h); + } + + c.width = v.w; + c.height = v.h; + + if (saveImg) { + c_ctx.putImageData(saveImg, 0, 0); + } + } + + vx2 = v.x + v.w - 1; + vy2 = v.y + v.h - 1; + + + // Position change + + if ((deltaX < 0) && ((v.x + deltaX) < 0)) { + deltaX = - v.x; + } + if ((vx2 + deltaX) >= fb_width) { + deltaX -= ((vx2 + deltaX) - fb_width + 1); + } + + if ((v.y + deltaY) < 0) { + deltaY = - v.y; + } + if ((vy2 + deltaY) >= fb_height) { + deltaY -= ((vy2 + deltaY) - fb_height + 1); + } + + if ((deltaX === 0) && (deltaY === 0)) { + //Util.Debug("skipping viewport change"); + return; + } + Util.Debug("viewportChange deltaX: " + deltaX + ", deltaY: " + deltaY); + + v.x += deltaX; + vx2 += deltaX; + v.y += deltaY; + vy2 += deltaY; + + // Update the clean rectangle + if (v.x > cr.x1) { + cr.x1 = v.x; + } + if (vx2 < cr.x2) { + cr.x2 = vx2; + } + if (v.y > cr.y1) { + cr.y1 = v.y; + } + if (vy2 < cr.y2) { + cr.y2 = vy2; + } + + if (deltaX < 0) { + // Shift viewport left, redraw left section + x1 = 0; + w = - deltaX; + } else { + // Shift viewport right, redraw right section + x1 = v.w - deltaX; + w = deltaX; + } + if (deltaY < 0) { + // Shift viewport up, redraw top section + y1 = 0; + h = - deltaY; + } else { + // Shift viewport down, redraw bottom section + y1 = v.h - deltaY; + h = deltaY; + } + + // Copy the valid part of the viewport to the shifted location + saveStyle = c_ctx.fillStyle; + c_ctx.fillStyle = "rgb(255,255,255)"; + if (deltaX !== 0) { + //that.copyImage(0, 0, -deltaX, 0, v.w, v.h); + //that.fillRect(x1, 0, w, v.h, [255,255,255]); + c_ctx.drawImage(c, 0, 0, v.w, v.h, -deltaX, 0, v.w, v.h); + c_ctx.fillRect(x1, 0, w, v.h); + } + if (deltaY !== 0) { + //that.copyImage(0, 0, 0, -deltaY, v.w, v.h); + //that.fillRect(0, y1, v.w, h, [255,255,255]); + c_ctx.drawImage(c, 0, 0, v.w, v.h, 0, -deltaY, v.w, v.h); + c_ctx.fillRect(0, y1, v.w, h); + } + c_ctx.fillStyle = saveStyle; +}; + + +// Return a map of clean and dirty areas of the viewport and reset the +// tracking of clean and dirty areas. +// +// Returns: {'cleanBox': {'x': x, 'y': y, 'w': w, 'h': h}, +// 'dirtyBoxes': [{'x': x, 'y': y, 'w': w, 'h': h}, ...]} +that.getCleanDirtyReset = function() { + var v = viewport, c = cleanRect, cleanBox, dirtyBoxes = [], + vx2 = v.x + v.w - 1, vy2 = v.y + v.h - 1; + + + // Copy the cleanRect + cleanBox = {'x': c.x1, 'y': c.y1, + 'w': c.x2 - c.x1 + 1, 'h': c.y2 - c.y1 + 1}; + + if ((c.x1 >= c.x2) || (c.y1 >= c.y2)) { + // Whole viewport is dirty + dirtyBoxes.push({'x': v.x, 'y': v.y, 'w': v.w, 'h': v.h}); + } else { + // Redraw dirty regions + if (v.x < c.x1) { + // left side dirty region + dirtyBoxes.push({'x': v.x, 'y': v.y, + 'w': c.x1 - v.x + 1, 'h': v.h}); + } + if (vx2 > c.x2) { + // right side dirty region + dirtyBoxes.push({'x': c.x2 + 1, 'y': v.y, + 'w': vx2 - c.x2, 'h': v.h}); + } + if (v.y < c.y1) { + // top/middle dirty region + dirtyBoxes.push({'x': c.x1, 'y': v.y, + 'w': c.x2 - c.x1 + 1, 'h': c.y1 - v.y}); + } + if (vy2 > c.y2) { + // bottom/middle dirty region + dirtyBoxes.push({'x': c.x1, 'y': c.y2 + 1, + 'w': c.x2 - c.x1 + 1, 'h': vy2 - c.y2}); + } + } + + // Reset the cleanRect to the whole viewport + cleanRect = {'x1': v.x, 'y1': v.y, + 'x2': v.x + v.w - 1, 'y2': v.y + v.h - 1}; + + return {'cleanBox': cleanBox, 'dirtyBoxes': dirtyBoxes}; +}; + +// Translate viewport coordinates to absolute coordinates +that.absX = function(x) { + return x + viewport.x; +}; +that.absY = function(y) { + return y + viewport.y; +}; + + +that.resize = function(width, height) { + c_prevStyle = ""; + + fb_width = width; + fb_height = height; + + rescale(conf.scale); + that.viewportChange(); +}; + +that.clear = function() { + + if (conf.logo) { + that.resize(conf.logo.width, conf.logo.height); + that.blitStringImage(conf.logo.data, 0, 0); + } else { + that.resize(640, 20); + c_ctx.clearRect(0, 0, viewport.w, viewport.h); + } + + // No benefit over default ("source-over") in Chrome and firefox + //c_ctx.globalCompositeOperation = "copy"; +}; + +that.fillRect = function(x, y, width, height, color) { + setFillColor(color); + c_ctx.fillRect(x - viewport.x, y - viewport.y, width, height); +}; + +that.copyImage = function(old_x, old_y, new_x, new_y, w, h) { + var x1 = old_x - viewport.x, y1 = old_y - viewport.y, + x2 = new_x - viewport.x, y2 = new_y - viewport.y; + c_ctx.drawImage(conf.target, x1, y1, w, h, x2, y2, w, h); +}; + + +// Start updating a tile +that.startTile = function(x, y, width, height, color) { + var data, bgr, red, green, blue, i; + tile_x = x; + tile_y = y; + if ((width === 16) && (height === 16)) { + tile = tile16x16; + } else { + tile = c_ctx.createImageData(width, height); + } + data = tile.data; + if (conf.prefer_js) { + if (conf.true_color) { + bgr = color; + } else { + bgr = conf.colourMap[color[0]]; + } + red = bgr[2]; + green = bgr[1]; + blue = bgr[0]; + for (i = 0; i < (width * height * 4); i+=4) { + data[i ] = red; + data[i + 1] = green; + data[i + 2] = blue; + data[i + 3] = 255; + } + } else { + that.fillRect(x, y, width, height, color); + } +}; + +// Update sub-rectangle of the current tile +that.subTile = function(x, y, w, h, color) { + var data, p, bgr, red, green, blue, width, j, i, xend, yend; + if (conf.prefer_js) { + data = tile.data; + width = tile.width; + if (conf.true_color) { + bgr = color; + } else { + bgr = conf.colourMap[color[0]]; + } + red = bgr[2]; + green = bgr[1]; + blue = bgr[0]; + xend = x + w; + yend = y + h; + for (j = y; j < yend; j += 1) { + for (i = x; i < xend; i += 1) { + p = (i + (j * width) ) * 4; + data[p ] = red; + data[p + 1] = green; + data[p + 2] = blue; + data[p + 3] = 255; + } + } + } else { + that.fillRect(tile_x + x, tile_y + y, w, h, color); + } +}; + +// Draw the current tile to the screen +that.finishTile = function() { + if (conf.prefer_js) { + c_ctx.putImageData(tile, tile_x - viewport.x, tile_y - viewport.y); + } + // else: No-op, if not prefer_js then already done by setSubTile +}; + +rgbImageData = function(x, y, width, height, arr, offset) { + var img, i, j, data, v = viewport; + /* + if ((x - v.x >= v.w) || (y - v.y >= v.h) || + (x - v.x + width < 0) || (y - v.y + height < 0)) { + // Skipping because outside of viewport + return; + } + */ + img = c_ctx.createImageData(width, height); + data = img.data; + for (i=0, j=offset; i < (width * height * 4); i=i+4, j=j+3) { + data[i ] = arr[j ]; + data[i + 1] = arr[j + 1]; + data[i + 2] = arr[j + 2]; + data[i + 3] = 255; // Set Alpha + } + c_ctx.putImageData(img, x - v.x, y - v.y); +}; + +bgrxImageData = function(x, y, width, height, arr, offset) { + var img, i, j, data, v = viewport; + /* + if ((x - v.x >= v.w) || (y - v.y >= v.h) || + (x - v.x + width < 0) || (y - v.y + height < 0)) { + // Skipping because outside of viewport + return; + } + */ + img = c_ctx.createImageData(width, height); + data = img.data; + for (i=0, j=offset; i < (width * height * 4); i=i+4, j=j+4) { + data[i ] = arr[j + 2]; + data[i + 1] = arr[j + 1]; + data[i + 2] = arr[j ]; + data[i + 3] = 255; // Set Alpha + } + c_ctx.putImageData(img, x - v.x, y - v.y); +}; + +cmapImageData = function(x, y, width, height, arr, offset) { + var img, i, j, data, bgr, cmap; + img = c_ctx.createImageData(width, height); + data = img.data; + cmap = conf.colourMap; + for (i=0, j=offset; i < (width * height * 4); i+=4, j+=1) { + bgr = cmap[arr[j]]; + data[i ] = bgr[2]; + data[i + 1] = bgr[1]; + data[i + 2] = bgr[0]; + data[i + 3] = 255; // Set Alpha + } + c_ctx.putImageData(img, x - viewport.x, y - viewport.y); +}; + +that.blitImage = function(x, y, width, height, arr, offset) { + if (conf.true_color) { + bgrxImageData(x, y, width, height, arr, offset); + } else { + cmapImageData(x, y, width, height, arr, offset); + } +}; + +that.blitRgbImage = function(x, y, width, height, arr, offset) { + if (conf.true_color) { + rgbImageData(x, y, width, height, arr, offset); + } else { + // prolly wrong... + cmapImageData(x, y, width, height, arr, offset); + } +}; + +that.blitStringImage = function(str, x, y) { + var img = new Image(); + img.onload = function () { + c_ctx.drawImage(img, x - viewport.x, y - viewport.y); + }; + img.src = str; +}; + +that.changeCursor = function(pixels, mask, hotx, hoty, w, h) { + if (conf.cursor_uri === false) { + Util.Warn("changeCursor called but no cursor data URI support"); + return; + } + + if (conf.true_color) { + changeCursor(conf.target, pixels, mask, hotx, hoty, w, h); + } else { + changeCursor(conf.target, pixels, mask, hotx, hoty, w, h, conf.colourMap); + } +}; + +that.defaultCursor = function() { + conf.target.style.cursor = "default"; +}; + +return constructor(); // Return the public API interface + +} // End of Display() + + +/* Set CSS cursor property using data URI encoded cursor file */ +function changeCursor(target, pixels, mask, hotx, hoty, w, h, cmap) { + "use strict"; + var cur = [], rgb, IHDRsz, RGBsz, ANDsz, XORsz, url, idx, alpha, x, y; + //Util.Debug(">> changeCursor, x: " + hotx + ", y: " + hoty + ", w: " + w + ", h: " + h); + + // Push multi-byte little-endian values + cur.push16le = function (num) { + this.push((num ) & 0xFF, + (num >> 8) & 0xFF ); + }; + cur.push32le = function (num) { + this.push((num ) & 0xFF, + (num >> 8) & 0xFF, + (num >> 16) & 0xFF, + (num >> 24) & 0xFF ); + }; + + IHDRsz = 40; + RGBsz = w * h * 4; + XORsz = Math.ceil( (w * h) / 8.0 ); + ANDsz = Math.ceil( (w * h) / 8.0 ); + + // Main header + cur.push16le(0); // 0: Reserved + cur.push16le(2); // 2: .CUR type + cur.push16le(1); // 4: Number of images, 1 for non-animated ico + + // Cursor #1 header (ICONDIRENTRY) + cur.push(w); // 6: width + cur.push(h); // 7: height + cur.push(0); // 8: colors, 0 -> true-color + cur.push(0); // 9: reserved + cur.push16le(hotx); // 10: hotspot x coordinate + cur.push16le(hoty); // 12: hotspot y coordinate + cur.push32le(IHDRsz + RGBsz + XORsz + ANDsz); + // 14: cursor data byte size + cur.push32le(22); // 18: offset of cursor data in the file + + + // Cursor #1 InfoHeader (ICONIMAGE/BITMAPINFO) + cur.push32le(IHDRsz); // 22: Infoheader size + cur.push32le(w); // 26: Cursor width + cur.push32le(h*2); // 30: XOR+AND height + cur.push16le(1); // 34: number of planes + cur.push16le(32); // 36: bits per pixel + cur.push32le(0); // 38: Type of compression + + cur.push32le(XORsz + ANDsz); // 43: Size of Image + // Gimp leaves this as 0 + + cur.push32le(0); // 46: reserved + cur.push32le(0); // 50: reserved + cur.push32le(0); // 54: reserved + cur.push32le(0); // 58: reserved + + // 62: color data (RGBQUAD icColors[]) + for (y = h-1; y >= 0; y -= 1) { + for (x = 0; x < w; x += 1) { + idx = y * Math.ceil(w / 8) + Math.floor(x/8); + alpha = (mask[idx] << (x % 8)) & 0x80 ? 255 : 0; + + if (cmap) { + idx = (w * y) + x; + rgb = cmap[pixels[idx]]; + cur.push(rgb[2]); // blue + cur.push(rgb[1]); // green + cur.push(rgb[0]); // red + cur.push(alpha); // alpha + } else { + idx = ((w * y) + x) * 4; + cur.push(pixels[idx + 2]); // blue + cur.push(pixels[idx + 1]); // green + cur.push(pixels[idx ]); // red + cur.push(alpha); // alpha + } + } + } + + // XOR/bitmask data (BYTE icXOR[]) + // (ignored, just needs to be right size) + for (y = 0; y < h; y += 1) { + for (x = 0; x < Math.ceil(w / 8); x += 1) { + cur.push(0x00); + } + } + + // AND/bitmask data (BYTE icAND[]) + // (ignored, just needs to be right size) + for (y = 0; y < h; y += 1) { + for (x = 0; x < Math.ceil(w / 8); x += 1) { + cur.push(0x00); + } + } + + url = "data:image/x-icon;base64," + Base64.encode(cur); + target.style.cursor = "url(" + url + ") " + hotx + " " + hoty + ", default"; + //Util.Debug("<< changeCursor, cur.length: " + cur.length); +} diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/input.js b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/input.js new file mode 100644 index 0000000..1dfe719 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/input.js @@ -0,0 +1,1911 @@ +/* + * noVNC: HTML5 VNC client + * Copyright (C) 2011 Joel Martin + * Licensed under LGPL-2 or any later version (see LICENSE.txt) + */ + +/*jslint browser: true, white: false, bitwise: false */ +/*global window, Util */ + + +// +// Keyboard event handler +// + +function Keyboard(defaults) { +"use strict"; + +var that = {}, // Public API methods + conf = {}, // Configuration attributes + + keyDownList = []; // List of depressed keys + // (even if they are happy) + +// Configuration attributes +Util.conf_defaults(conf, that, defaults, [ + ['target', 'wo', 'dom', document, 'DOM element that captures keyboard input'], + ['focused', 'rw', 'bool', true, 'Capture and send key events'], + + ['onKeyPress', 'rw', 'func', null, 'Handler for key press/release'] + ]); + + +// +// Private functions +// + +// From the event keyCode return the keysym value for keys that need +// to be suppressed otherwise they may trigger unintended browser +// actions +function getKeysymSpecial(evt) { + var keysym = null; + + switch ( evt.keyCode ) { + // These generate a keyDown and keyPress in Firefox and Opera + case 8 : keysym = 0xFF08; break; // BACKSPACE + case 13 : keysym = 0xFF0D; break; // ENTER + + // This generates a keyDown and keyPress in Opera + case 9 : keysym = 0xFF09; break; // TAB + default : break; + } + + if (evt.type === 'keydown') { + switch ( evt.keyCode ) { + case 27 : keysym = 0xFF1B; break; // ESCAPE + case 46 : keysym = 0xFFFF; break; // DELETE + + case 36 : keysym = 0xFF50; break; // HOME + case 35 : keysym = 0xFF57; break; // END + case 33 : keysym = 0xFF55; break; // PAGE_UP + case 34 : keysym = 0xFF56; break; // PAGE_DOWN + case 45 : keysym = 0xFF63; break; // INSERT + // '-' during keyPress + case 37 : keysym = 0xFF51; break; // LEFT + case 38 : keysym = 0xFF52; break; // UP + case 39 : keysym = 0xFF53; break; // RIGHT + case 40 : keysym = 0xFF54; break; // DOWN + case 16 : keysym = 0xFFE1; break; // SHIFT + case 17 : keysym = 0xFFE3; break; // CONTROL + //case 18 : keysym = 0xFFE7; break; // Left Meta (Mac Option) + case 18 : keysym = 0xFFE9; break; // Left ALT (Mac Command) + + case 112 : keysym = 0xFFBE; break; // F1 + case 113 : keysym = 0xFFBF; break; // F2 + case 114 : keysym = 0xFFC0; break; // F3 + case 115 : keysym = 0xFFC1; break; // F4 + case 116 : keysym = 0xFFC2; break; // F5 + case 117 : keysym = 0xFFC3; break; // F6 + case 118 : keysym = 0xFFC4; break; // F7 + case 119 : keysym = 0xFFC5; break; // F8 + case 120 : keysym = 0xFFC6; break; // F9 + case 121 : keysym = 0xFFC7; break; // F10 + case 122 : keysym = 0xFFC8; break; // F11 + case 123 : keysym = 0xFFC9; break; // F12 + + default : break; + } + } + + if ((!keysym) && (evt.ctrlKey || evt.altKey)) { + if ((typeof(evt.which) !== "undefined") && (evt.which > 0)) { + keysym = evt.which; + } else { + // IE9 always + // Firefox and Opera when ctrl/alt + special + Util.Warn("which not set, using keyCode"); + keysym = evt.keyCode; + } + + /* Remap symbols */ + switch (keysym) { + case 186 : keysym = 59; break; // ; (IE) + case 187 : keysym = 61; break; // = (IE) + case 188 : keysym = 44; break; // , (Mozilla, IE) + case 109 : // - (Mozilla, Opera) + if (Util.Engine.gecko || Util.Engine.presto) { + keysym = 45; } + break; + case 189 : keysym = 45; break; // - (IE) + case 190 : keysym = 46; break; // . (Mozilla, IE) + case 191 : keysym = 47; break; // / (Mozilla, IE) + case 192 : keysym = 96; break; // ` (Mozilla, IE) + case 219 : keysym = 91; break; // [ (Mozilla, IE) + case 220 : keysym = 92; break; // \ (Mozilla, IE) + case 221 : keysym = 93; break; // ] (Mozilla, IE) + case 222 : keysym = 39; break; // ' (Mozilla, IE) + } + + /* Remap shifted and unshifted keys */ + if (!!evt.shiftKey) { + switch (keysym) { + case 48 : keysym = 41 ; break; // ) (shifted 0) + case 49 : keysym = 33 ; break; // ! (shifted 1) + case 50 : keysym = 64 ; break; // @ (shifted 2) + case 51 : keysym = 35 ; break; // # (shifted 3) + case 52 : keysym = 36 ; break; // $ (shifted 4) + case 53 : keysym = 37 ; break; // % (shifted 5) + case 54 : keysym = 94 ; break; // ^ (shifted 6) + case 55 : keysym = 38 ; break; // & (shifted 7) + case 56 : keysym = 42 ; break; // * (shifted 8) + case 57 : keysym = 40 ; break; // ( (shifted 9) + + case 59 : keysym = 58 ; break; // : (shifted `) + case 61 : keysym = 43 ; break; // + (shifted ;) + case 44 : keysym = 60 ; break; // < (shifted ,) + case 45 : keysym = 95 ; break; // _ (shifted -) + case 46 : keysym = 62 ; break; // > (shifted .) + case 47 : keysym = 63 ; break; // ? (shifted /) + case 96 : keysym = 126; break; // ~ (shifted `) + case 91 : keysym = 123; break; // { (shifted [) + case 92 : keysym = 124; break; // | (shifted \) + case 93 : keysym = 125; break; // } (shifted ]) + case 39 : keysym = 34 ; break; // " (shifted ') + } + } else if ((keysym >= 65) && (keysym <=90)) { + /* Remap unshifted A-Z */ + keysym += 32; + } else if (evt.keyLocation === 3) { + // numpad keys + switch (keysym) { + case 96 : keysym = 48; break; // 0 + case 97 : keysym = 49; break; // 1 + case 98 : keysym = 50; break; // 2 + case 99 : keysym = 51; break; // 3 + case 100: keysym = 52; break; // 4 + case 101: keysym = 53; break; // 5 + case 102: keysym = 54; break; // 6 + case 103: keysym = 55; break; // 7 + case 104: keysym = 56; break; // 8 + case 105: keysym = 57; break; // 9 + case 109: keysym = 45; break; // - + case 110: keysym = 46; break; // . + case 111: keysym = 47; break; // / + } + } + } + + return keysym; +} + +/* Translate DOM keyPress event to keysym value */ +function getKeysym(evt) { + var keysym, msg; + + if (typeof(evt.which) !== "undefined") { + // WebKit, Firefox, Opera + keysym = evt.which; + } else { + // IE9 + Util.Warn("which not set, using keyCode"); + keysym = evt.keyCode; + } + + if ((keysym > 255) && (keysym < 0xFF00)) { + msg = "Mapping character code " + keysym; + // Map Unicode outside Latin 1 to X11 keysyms + keysym = unicodeTable[keysym]; + if (typeof(keysym) === 'undefined') { + keysym = 0; + } + Util.Debug(msg + " to " + keysym); + } + + return keysym; +} + +function show_keyDownList(kind) { + var c; + var msg = "keyDownList (" + kind + "):\n"; + for (c = 0; c < keyDownList.length; c++) { + msg = msg + " " + c + " - keyCode: " + keyDownList[c].keyCode + + " - which: " + keyDownList[c].which + "\n"; + } + Util.Debug(msg); +} + +function copyKeyEvent(evt) { + var members = ['type', 'keyCode', 'charCode', 'which', + 'altKey', 'ctrlKey', 'shiftKey', + 'keyLocation', 'keyIdentifier'], i, obj = {}; + for (i = 0; i < members.length; i++) { + if (typeof(evt[members[i]]) !== "undefined") { + obj[members[i]] = evt[members[i]]; + } + } + return obj; +} + +function pushKeyEvent(fevt) { + keyDownList.push(fevt); +} + +function getKeyEvent(keyCode, pop) { + var i, fevt = null; + for (i = keyDownList.length-1; i >= 0; i--) { + if (keyDownList[i].keyCode === keyCode) { + if ((typeof(pop) !== "undefined") && (pop)) { + fevt = keyDownList.splice(i, 1)[0]; + } else { + fevt = keyDownList[i]; + } + break; + } + } + return fevt; +} + +function ignoreKeyEvent(evt) { + // Blarg. Some keys have a different keyCode on keyDown vs keyUp + if (evt.keyCode === 229) { + // French AZERTY keyboard dead key. + // Lame thing is that the respective keyUp is 219 so we can't + // properly ignore the keyUp event + return true; + } + return false; +} + + +// +// Key Event Handling: +// +// There are several challenges when dealing with key events: +// - The meaning and use of keyCode, charCode and which depends on +// both the browser and the event type (keyDown/Up vs keyPress). +// - We cannot automatically determine the keyboard layout +// - The keyDown and keyUp events have a keyCode value that has not +// been translated by modifier keys. +// - The keyPress event has a translated (for layout and modifiers) +// character code but the attribute containing it differs. keyCode +// contains the translated value in WebKit (Chrome/Safari), Opera +// 11 and IE9. charCode contains the value in WebKit and Firefox. +// The which attribute contains the value on WebKit, Firefox and +// Opera 11. +// - The keyDown/Up keyCode value indicates (sort of) the physical +// key was pressed but only for standard US layout. On a US +// keyboard, the '-' and '_' characters are on the same key and +// generate a keyCode value of 189. But on an AZERTY keyboard even +// though they are different physical keys they both still +// generate a keyCode of 189! +// - To prevent a key event from propagating to the browser and +// causing unwanted default actions (such as closing a tab, +// opening a menu, shifting focus, etc) we must suppress this +// event in both keyDown and keyPress because not all key strokes +// generate on a keyPress event. Also, in WebKit and IE9 +// suppressing the keyDown prevents a keyPress but other browsers +// still generated a keyPress even if keyDown is suppressed. +// +// For safe key events, we wait until the keyPress event before +// reporting a key down event. For unsafe key events, we report a key +// down event when the keyDown event fires and we suppress any further +// actions (including keyPress). +// +// In order to report a key up event that matches what we reported +// for the key down event, we keep a list of keys that are currently +// down. When the keyDown event happens, we add the key event to the +// list. If it is a safe key event, then we update the which attribute +// in the most recent item on the list when we received a keyPress +// event (keyPress should immediately follow keyDown). When we +// received a keyUp event we search for the event on the list with +// a matching keyCode and we report the character code using the value +// in the 'which' attribute that was stored with that key. +// + +function onKeyDown(e) { + if (! conf.focused) { + return true; + } + var fevt = null, evt = (e ? e : window.event), + keysym = null, suppress = false; + //Util.Debug("onKeyDown kC:" + evt.keyCode + " cC:" + evt.charCode + " w:" + evt.which); + + fevt = copyKeyEvent(evt); + + keysym = getKeysymSpecial(evt); + // Save keysym decoding for use in keyUp + fevt.keysym = keysym; + if (keysym) { + // If it is a key or key combination that might trigger + // browser behaviors or it has no corresponding keyPress + // event, then send it immediately + if (conf.onKeyPress && !ignoreKeyEvent(evt)) { + Util.Debug("onKeyPress down, keysym: " + keysym + + " (onKeyDown key: " + evt.keyCode + + ", which: " + evt.which + ")"); + conf.onKeyPress(keysym, 1, evt); + } + suppress = true; + } + + if (! ignoreKeyEvent(evt)) { + // Add it to the list of depressed keys + pushKeyEvent(fevt); + //show_keyDownList('down'); + } + + if (suppress) { + // Suppress bubbling/default actions + Util.stopEvent(e); + return false; + } else { + // Allow the event to bubble and become a keyPress event which + // will have the character code translated + return true; + } +} + +function onKeyPress(e) { + if (! conf.focused) { + return true; + } + var evt = (e ? e : window.event), + kdlen = keyDownList.length, keysym = null; + //Util.Debug("onKeyPress kC:" + evt.keyCode + " cC:" + evt.charCode + " w:" + evt.which); + + if (((evt.which !== "undefined") && (evt.which === 0)) || + (getKeysymSpecial(evt))) { + // Firefox and Opera generate a keyPress event even if keyDown + // is suppressed. But the keys we want to suppress will have + // either: + // - the which attribute set to 0 + // - getKeysymSpecial() will identify it + Util.Debug("Ignoring special key in keyPress"); + Util.stopEvent(e); + return false; + } + + keysym = getKeysym(evt); + + // Modify the the which attribute in the depressed keys list so + // that the keyUp event will be able to have the character code + // translation available. + if (kdlen > 0) { + keyDownList[kdlen-1].keysym = keysym; + } else { + Util.Warn("keyDownList empty when keyPress triggered"); + } + + //show_keyDownList('press'); + + // Send the translated keysym + if (conf.onKeyPress && (keysym > 0)) { + Util.Debug("onKeyPress down, keysym: " + keysym + + " (onKeyPress key: " + evt.keyCode + + ", which: " + evt.which + ")"); + conf.onKeyPress(keysym, 1, evt); + } + + // Stop keypress events just in case + Util.stopEvent(e); + return false; +} + +function onKeyUp(e) { + if (! conf.focused) { + return true; + } + var fevt = null, evt = (e ? e : window.event), keysym; + //Util.Debug("onKeyUp kC:" + evt.keyCode + " cC:" + evt.charCode + " w:" + evt.which); + + fevt = getKeyEvent(evt.keyCode, true); + + if (fevt) { + keysym = fevt.keysym; + } else { + Util.Warn("Key event (keyCode = " + evt.keyCode + + ") not found on keyDownList"); + keysym = 0; + } + + //show_keyDownList('up'); + + if (conf.onKeyPress && (keysym > 0)) { + //Util.Debug("keyPress up, keysym: " + keysym + + // " (key: " + evt.keyCode + ", which: " + evt.which + ")"); + Util.Debug("onKeyPress up, keysym: " + keysym + + " (onKeyPress key: " + evt.keyCode + + ", which: " + evt.which + ")"); + conf.onKeyPress(keysym, 0, evt); + } + Util.stopEvent(e); + return false; +} + +function allKeysUp() { + Util.Debug(">> Keyboard.allKeysUp"); + if (keyDownList.length > 0) { + Util.Info("Releasing pressed/down keys"); + } + var i, keysym, fevt = null; + for (i = keyDownList.length-1; i >= 0; i--) { + fevt = keyDownList.splice(i, 1)[0]; + keysym = fevt.keysym; + if (conf.onKeyPress && (keysym > 0)) { + Util.Debug("allKeysUp, keysym: " + keysym + + " (keyCode: " + fevt.keyCode + + ", which: " + fevt.which + ")"); + conf.onKeyPress(keysym, 0, fevt); + } + } + Util.Debug("<< Keyboard.allKeysUp"); + return; +} + +// +// Public API interface functions +// + +that.grab = function() { + //Util.Debug(">> Keyboard.grab"); + var c = conf.target; + + Util.addEvent(c, 'keydown', onKeyDown); + Util.addEvent(c, 'keyup', onKeyUp); + Util.addEvent(c, 'keypress', onKeyPress); + + // Release (key up) if window loses focus + Util.addEvent(window, 'blur', allKeysUp); + + //Util.Debug("<< Keyboard.grab"); +}; + +that.ungrab = function() { + //Util.Debug(">> Keyboard.ungrab"); + var c = conf.target; + + Util.removeEvent(c, 'keydown', onKeyDown); + Util.removeEvent(c, 'keyup', onKeyUp); + Util.removeEvent(c, 'keypress', onKeyPress); + Util.removeEvent(window, 'blur', allKeysUp); + + // Release (key up) all keys that are in a down state + allKeysUp(); + + //Util.Debug(">> Keyboard.ungrab"); +}; + +return that; // Return the public API interface + +} // End of Keyboard() + + +// +// Mouse event handler +// + +function Mouse(defaults) { +"use strict"; + +var that = {}, // Public API methods + conf = {}; // Configuration attributes + +// Configuration attributes +Util.conf_defaults(conf, that, defaults, [ + ['target', 'ro', 'dom', document, 'DOM element that captures mouse input'], + ['focused', 'rw', 'bool', true, 'Capture and send mouse clicks/movement'], + ['scale', 'rw', 'float', 1.0, 'Viewport scale factor 0.0 - 1.0'], + + ['onMouseButton', 'rw', 'func', null, 'Handler for mouse button click/release'], + ['onMouseMove', 'rw', 'func', null, 'Handler for mouse movement'], + ['touchButton', 'rw', 'int', 1, 'Button mask (1, 2, 4) for touch devices (0 means ignore clicks)'] + ]); + + +// +// Private functions +// + +function onMouseButton(e, down) { + var evt, pos, bmask; + if (! conf.focused) { + return true; + } + evt = (e ? e : window.event); + pos = Util.getEventPosition(e, conf.target, conf.scale); + if (e.touches || e.changedTouches) { + // Touch device + bmask = conf.touchButton; + // If bmask is set + } else if (evt.which) { + /* everything except IE */ + bmask = 1 << evt.button; + } else { + /* IE including 9 */ + bmask = (evt.button & 0x1) + // Left + (evt.button & 0x2) * 2 + // Right + (evt.button & 0x4) / 2; // Middle + } + //Util.Debug("mouse " + pos.x + "," + pos.y + " down: " + down + + // " bmask: " + bmask + "(evt.button: " + evt.button + ")"); + if (bmask > 0 && conf.onMouseButton) { + Util.Debug("onMouseButton " + (down ? "down" : "up") + + ", x: " + pos.x + ", y: " + pos.y + ", bmask: " + bmask); + conf.onMouseButton(pos.x, pos.y, down, bmask); + } + Util.stopEvent(e); + return false; +} + +function onMouseDown(e) { + onMouseButton(e, 1); +} + +function onMouseUp(e) { + onMouseButton(e, 0); +} + +function onMouseWheel(e) { + var evt, pos, bmask, wheelData; + if (! conf.focused) { + return true; + } + evt = (e ? e : window.event); + pos = Util.getEventPosition(e, conf.target, conf.scale); + wheelData = evt.detail ? evt.detail * -1 : evt.wheelDelta / 40; + if (wheelData > 0) { + bmask = 1 << 3; + } else { + bmask = 1 << 4; + } + //Util.Debug('mouse scroll by ' + wheelData + ':' + pos.x + "," + pos.y); + if (conf.onMouseButton) { + conf.onMouseButton(pos.x, pos.y, 1, bmask); + conf.onMouseButton(pos.x, pos.y, 0, bmask); + } + Util.stopEvent(e); + return false; +} + +function onMouseMove(e) { + var evt, pos; + if (! conf.focused) { + return true; + } + evt = (e ? e : window.event); + pos = Util.getEventPosition(e, conf.target, conf.scale); + //Util.Debug('mouse ' + evt.which + '/' + evt.button + ' up:' + pos.x + "," + pos.y); + if (conf.onMouseMove) { + conf.onMouseMove(pos.x, pos.y); + } + Util.stopEvent(e); + return false; +} + +function onMouseDisable(e) { + var evt, pos; + if (! conf.focused) { + return true; + } + evt = (e ? e : window.event); + pos = Util.getEventPosition(e, conf.target, conf.scale); + /* Stop propagation if inside canvas area */ + if ((pos.x >= 0) && (pos.y >= 0) && + (pos.x < conf.target.offsetWidth) && + (pos.y < conf.target.offsetHeight)) { + //Util.Debug("mouse event disabled"); + Util.stopEvent(e); + return false; + } + //Util.Debug("mouse event not disabled"); + return true; +} + +// +// Public API interface functions +// + +that.grab = function() { + //Util.Debug(">> Mouse.grab"); + var c = conf.target; + + if ('ontouchstart' in document.documentElement) { + Util.addEvent(c, 'touchstart', onMouseDown); + Util.addEvent(c, 'touchend', onMouseUp); + Util.addEvent(c, 'touchmove', onMouseMove); + } else { + Util.addEvent(c, 'mousedown', onMouseDown); + Util.addEvent(c, 'mouseup', onMouseUp); + Util.addEvent(c, 'mousemove', onMouseMove); + Util.addEvent(c, (Util.Engine.gecko) ? 'DOMMouseScroll' : 'mousewheel', + onMouseWheel); + } + + /* Work around right and middle click browser behaviors */ + Util.addEvent(document, 'click', onMouseDisable); + Util.addEvent(document.body, 'contextmenu', onMouseDisable); + + //Util.Debug("<< Mouse.grab"); +}; + +that.ungrab = function() { + //Util.Debug(">> Mouse.ungrab"); + var c = conf.target; + + if ('ontouchstart' in document.documentElement) { + Util.removeEvent(c, 'touchstart', onMouseDown); + Util.removeEvent(c, 'touchend', onMouseUp); + Util.removeEvent(c, 'touchmove', onMouseMove); + } else { + Util.removeEvent(c, 'mousedown', onMouseDown); + Util.removeEvent(c, 'mouseup', onMouseUp); + Util.removeEvent(c, 'mousemove', onMouseMove); + Util.removeEvent(c, (Util.Engine.gecko) ? 'DOMMouseScroll' : 'mousewheel', + onMouseWheel); + } + + /* Work around right and middle click browser behaviors */ + Util.removeEvent(document, 'click', onMouseDisable); + Util.removeEvent(document.body, 'contextmenu', onMouseDisable); + + //Util.Debug(">> Mouse.ungrab"); +}; + +return that; // Return the public API interface + +} // End of Mouse() + + +/* + * Browser keypress to X11 keysym for Unicode characters > U+00FF + */ +unicodeTable = { + 0x0104 : 0x01a1, + 0x02D8 : 0x01a2, + 0x0141 : 0x01a3, + 0x013D : 0x01a5, + 0x015A : 0x01a6, + 0x0160 : 0x01a9, + 0x015E : 0x01aa, + 0x0164 : 0x01ab, + 0x0179 : 0x01ac, + 0x017D : 0x01ae, + 0x017B : 0x01af, + 0x0105 : 0x01b1, + 0x02DB : 0x01b2, + 0x0142 : 0x01b3, + 0x013E : 0x01b5, + 0x015B : 0x01b6, + 0x02C7 : 0x01b7, + 0x0161 : 0x01b9, + 0x015F : 0x01ba, + 0x0165 : 0x01bb, + 0x017A : 0x01bc, + 0x02DD : 0x01bd, + 0x017E : 0x01be, + 0x017C : 0x01bf, + 0x0154 : 0x01c0, + 0x0102 : 0x01c3, + 0x0139 : 0x01c5, + 0x0106 : 0x01c6, + 0x010C : 0x01c8, + 0x0118 : 0x01ca, + 0x011A : 0x01cc, + 0x010E : 0x01cf, + 0x0110 : 0x01d0, + 0x0143 : 0x01d1, + 0x0147 : 0x01d2, + 0x0150 : 0x01d5, + 0x0158 : 0x01d8, + 0x016E : 0x01d9, + 0x0170 : 0x01db, + 0x0162 : 0x01de, + 0x0155 : 0x01e0, + 0x0103 : 0x01e3, + 0x013A : 0x01e5, + 0x0107 : 0x01e6, + 0x010D : 0x01e8, + 0x0119 : 0x01ea, + 0x011B : 0x01ec, + 0x010F : 0x01ef, + 0x0111 : 0x01f0, + 0x0144 : 0x01f1, + 0x0148 : 0x01f2, + 0x0151 : 0x01f5, + 0x0171 : 0x01fb, + 0x0159 : 0x01f8, + 0x016F : 0x01f9, + 0x0163 : 0x01fe, + 0x02D9 : 0x01ff, + 0x0126 : 0x02a1, + 0x0124 : 0x02a6, + 0x0130 : 0x02a9, + 0x011E : 0x02ab, + 0x0134 : 0x02ac, + 0x0127 : 0x02b1, + 0x0125 : 0x02b6, + 0x0131 : 0x02b9, + 0x011F : 0x02bb, + 0x0135 : 0x02bc, + 0x010A : 0x02c5, + 0x0108 : 0x02c6, + 0x0120 : 0x02d5, + 0x011C : 0x02d8, + 0x016C : 0x02dd, + 0x015C : 0x02de, + 0x010B : 0x02e5, + 0x0109 : 0x02e6, + 0x0121 : 0x02f5, + 0x011D : 0x02f8, + 0x016D : 0x02fd, + 0x015D : 0x02fe, + 0x0138 : 0x03a2, + 0x0156 : 0x03a3, + 0x0128 : 0x03a5, + 0x013B : 0x03a6, + 0x0112 : 0x03aa, + 0x0122 : 0x03ab, + 0x0166 : 0x03ac, + 0x0157 : 0x03b3, + 0x0129 : 0x03b5, + 0x013C : 0x03b6, + 0x0113 : 0x03ba, + 0x0123 : 0x03bb, + 0x0167 : 0x03bc, + 0x014A : 0x03bd, + 0x014B : 0x03bf, + 0x0100 : 0x03c0, + 0x012E : 0x03c7, + 0x0116 : 0x03cc, + 0x012A : 0x03cf, + 0x0145 : 0x03d1, + 0x014C : 0x03d2, + 0x0136 : 0x03d3, + 0x0172 : 0x03d9, + 0x0168 : 0x03dd, + 0x016A : 0x03de, + 0x0101 : 0x03e0, + 0x012F : 0x03e7, + 0x0117 : 0x03ec, + 0x012B : 0x03ef, + 0x0146 : 0x03f1, + 0x014D : 0x03f2, + 0x0137 : 0x03f3, + 0x0173 : 0x03f9, + 0x0169 : 0x03fd, + 0x016B : 0x03fe, + 0x1E02 : 0x1001e02, + 0x1E03 : 0x1001e03, + 0x1E0A : 0x1001e0a, + 0x1E80 : 0x1001e80, + 0x1E82 : 0x1001e82, + 0x1E0B : 0x1001e0b, + 0x1EF2 : 0x1001ef2, + 0x1E1E : 0x1001e1e, + 0x1E1F : 0x1001e1f, + 0x1E40 : 0x1001e40, + 0x1E41 : 0x1001e41, + 0x1E56 : 0x1001e56, + 0x1E81 : 0x1001e81, + 0x1E57 : 0x1001e57, + 0x1E83 : 0x1001e83, + 0x1E60 : 0x1001e60, + 0x1EF3 : 0x1001ef3, + 0x1E84 : 0x1001e84, + 0x1E85 : 0x1001e85, + 0x1E61 : 0x1001e61, + 0x0174 : 0x1000174, + 0x1E6A : 0x1001e6a, + 0x0176 : 0x1000176, + 0x0175 : 0x1000175, + 0x1E6B : 0x1001e6b, + 0x0177 : 0x1000177, + 0x0152 : 0x13bc, + 0x0153 : 0x13bd, + 0x0178 : 0x13be, + 0x203E : 0x047e, + 0x3002 : 0x04a1, + 0x300C : 0x04a2, + 0x300D : 0x04a3, + 0x3001 : 0x04a4, + 0x30FB : 0x04a5, + 0x30F2 : 0x04a6, + 0x30A1 : 0x04a7, + 0x30A3 : 0x04a8, + 0x30A5 : 0x04a9, + 0x30A7 : 0x04aa, + 0x30A9 : 0x04ab, + 0x30E3 : 0x04ac, + 0x30E5 : 0x04ad, + 0x30E7 : 0x04ae, + 0x30C3 : 0x04af, + 0x30FC : 0x04b0, + 0x30A2 : 0x04b1, + 0x30A4 : 0x04b2, + 0x30A6 : 0x04b3, + 0x30A8 : 0x04b4, + 0x30AA : 0x04b5, + 0x30AB : 0x04b6, + 0x30AD : 0x04b7, + 0x30AF : 0x04b8, + 0x30B1 : 0x04b9, + 0x30B3 : 0x04ba, + 0x30B5 : 0x04bb, + 0x30B7 : 0x04bc, + 0x30B9 : 0x04bd, + 0x30BB : 0x04be, + 0x30BD : 0x04bf, + 0x30BF : 0x04c0, + 0x30C1 : 0x04c1, + 0x30C4 : 0x04c2, + 0x30C6 : 0x04c3, + 0x30C8 : 0x04c4, + 0x30CA : 0x04c5, + 0x30CB : 0x04c6, + 0x30CC : 0x04c7, + 0x30CD : 0x04c8, + 0x30CE : 0x04c9, + 0x30CF : 0x04ca, + 0x30D2 : 0x04cb, + 0x30D5 : 0x04cc, + 0x30D8 : 0x04cd, + 0x30DB : 0x04ce, + 0x30DE : 0x04cf, + 0x30DF : 0x04d0, + 0x30E0 : 0x04d1, + 0x30E1 : 0x04d2, + 0x30E2 : 0x04d3, + 0x30E4 : 0x04d4, + 0x30E6 : 0x04d5, + 0x30E8 : 0x04d6, + 0x30E9 : 0x04d7, + 0x30EA : 0x04d8, + 0x30EB : 0x04d9, + 0x30EC : 0x04da, + 0x30ED : 0x04db, + 0x30EF : 0x04dc, + 0x30F3 : 0x04dd, + 0x309B : 0x04de, + 0x309C : 0x04df, + 0x06F0 : 0x10006f0, + 0x06F1 : 0x10006f1, + 0x06F2 : 0x10006f2, + 0x06F3 : 0x10006f3, + 0x06F4 : 0x10006f4, + 0x06F5 : 0x10006f5, + 0x06F6 : 0x10006f6, + 0x06F7 : 0x10006f7, + 0x06F8 : 0x10006f8, + 0x06F9 : 0x10006f9, + 0x066A : 0x100066a, + 0x0670 : 0x1000670, + 0x0679 : 0x1000679, + 0x067E : 0x100067e, + 0x0686 : 0x1000686, + 0x0688 : 0x1000688, + 0x0691 : 0x1000691, + 0x060C : 0x05ac, + 0x06D4 : 0x10006d4, + 0x0660 : 0x1000660, + 0x0661 : 0x1000661, + 0x0662 : 0x1000662, + 0x0663 : 0x1000663, + 0x0664 : 0x1000664, + 0x0665 : 0x1000665, + 0x0666 : 0x1000666, + 0x0667 : 0x1000667, + 0x0668 : 0x1000668, + 0x0669 : 0x1000669, + 0x061B : 0x05bb, + 0x061F : 0x05bf, + 0x0621 : 0x05c1, + 0x0622 : 0x05c2, + 0x0623 : 0x05c3, + 0x0624 : 0x05c4, + 0x0625 : 0x05c5, + 0x0626 : 0x05c6, + 0x0627 : 0x05c7, + 0x0628 : 0x05c8, + 0x0629 : 0x05c9, + 0x062A : 0x05ca, + 0x062B : 0x05cb, + 0x062C : 0x05cc, + 0x062D : 0x05cd, + 0x062E : 0x05ce, + 0x062F : 0x05cf, + 0x0630 : 0x05d0, + 0x0631 : 0x05d1, + 0x0632 : 0x05d2, + 0x0633 : 0x05d3, + 0x0634 : 0x05d4, + 0x0635 : 0x05d5, + 0x0636 : 0x05d6, + 0x0637 : 0x05d7, + 0x0638 : 0x05d8, + 0x0639 : 0x05d9, + 0x063A : 0x05da, + 0x0640 : 0x05e0, + 0x0641 : 0x05e1, + 0x0642 : 0x05e2, + 0x0643 : 0x05e3, + 0x0644 : 0x05e4, + 0x0645 : 0x05e5, + 0x0646 : 0x05e6, + 0x0647 : 0x05e7, + 0x0648 : 0x05e8, + 0x0649 : 0x05e9, + 0x064A : 0x05ea, + 0x064B : 0x05eb, + 0x064C : 0x05ec, + 0x064D : 0x05ed, + 0x064E : 0x05ee, + 0x064F : 0x05ef, + 0x0650 : 0x05f0, + 0x0651 : 0x05f1, + 0x0652 : 0x05f2, + 0x0653 : 0x1000653, + 0x0654 : 0x1000654, + 0x0655 : 0x1000655, + 0x0698 : 0x1000698, + 0x06A4 : 0x10006a4, + 0x06A9 : 0x10006a9, + 0x06AF : 0x10006af, + 0x06BA : 0x10006ba, + 0x06BE : 0x10006be, + 0x06CC : 0x10006cc, + 0x06D2 : 0x10006d2, + 0x06C1 : 0x10006c1, + 0x0492 : 0x1000492, + 0x0493 : 0x1000493, + 0x0496 : 0x1000496, + 0x0497 : 0x1000497, + 0x049A : 0x100049a, + 0x049B : 0x100049b, + 0x049C : 0x100049c, + 0x049D : 0x100049d, + 0x04A2 : 0x10004a2, + 0x04A3 : 0x10004a3, + 0x04AE : 0x10004ae, + 0x04AF : 0x10004af, + 0x04B0 : 0x10004b0, + 0x04B1 : 0x10004b1, + 0x04B2 : 0x10004b2, + 0x04B3 : 0x10004b3, + 0x04B6 : 0x10004b6, + 0x04B7 : 0x10004b7, + 0x04B8 : 0x10004b8, + 0x04B9 : 0x10004b9, + 0x04BA : 0x10004ba, + 0x04BB : 0x10004bb, + 0x04D8 : 0x10004d8, + 0x04D9 : 0x10004d9, + 0x04E2 : 0x10004e2, + 0x04E3 : 0x10004e3, + 0x04E8 : 0x10004e8, + 0x04E9 : 0x10004e9, + 0x04EE : 0x10004ee, + 0x04EF : 0x10004ef, + 0x0452 : 0x06a1, + 0x0453 : 0x06a2, + 0x0451 : 0x06a3, + 0x0454 : 0x06a4, + 0x0455 : 0x06a5, + 0x0456 : 0x06a6, + 0x0457 : 0x06a7, + 0x0458 : 0x06a8, + 0x0459 : 0x06a9, + 0x045A : 0x06aa, + 0x045B : 0x06ab, + 0x045C : 0x06ac, + 0x0491 : 0x06ad, + 0x045E : 0x06ae, + 0x045F : 0x06af, + 0x2116 : 0x06b0, + 0x0402 : 0x06b1, + 0x0403 : 0x06b2, + 0x0401 : 0x06b3, + 0x0404 : 0x06b4, + 0x0405 : 0x06b5, + 0x0406 : 0x06b6, + 0x0407 : 0x06b7, + 0x0408 : 0x06b8, + 0x0409 : 0x06b9, + 0x040A : 0x06ba, + 0x040B : 0x06bb, + 0x040C : 0x06bc, + 0x0490 : 0x06bd, + 0x040E : 0x06be, + 0x040F : 0x06bf, + 0x044E : 0x06c0, + 0x0430 : 0x06c1, + 0x0431 : 0x06c2, + 0x0446 : 0x06c3, + 0x0434 : 0x06c4, + 0x0435 : 0x06c5, + 0x0444 : 0x06c6, + 0x0433 : 0x06c7, + 0x0445 : 0x06c8, + 0x0438 : 0x06c9, + 0x0439 : 0x06ca, + 0x043A : 0x06cb, + 0x043B : 0x06cc, + 0x043C : 0x06cd, + 0x043D : 0x06ce, + 0x043E : 0x06cf, + 0x043F : 0x06d0, + 0x044F : 0x06d1, + 0x0440 : 0x06d2, + 0x0441 : 0x06d3, + 0x0442 : 0x06d4, + 0x0443 : 0x06d5, + 0x0436 : 0x06d6, + 0x0432 : 0x06d7, + 0x044C : 0x06d8, + 0x044B : 0x06d9, + 0x0437 : 0x06da, + 0x0448 : 0x06db, + 0x044D : 0x06dc, + 0x0449 : 0x06dd, + 0x0447 : 0x06de, + 0x044A : 0x06df, + 0x042E : 0x06e0, + 0x0410 : 0x06e1, + 0x0411 : 0x06e2, + 0x0426 : 0x06e3, + 0x0414 : 0x06e4, + 0x0415 : 0x06e5, + 0x0424 : 0x06e6, + 0x0413 : 0x06e7, + 0x0425 : 0x06e8, + 0x0418 : 0x06e9, + 0x0419 : 0x06ea, + 0x041A : 0x06eb, + 0x041B : 0x06ec, + 0x041C : 0x06ed, + 0x041D : 0x06ee, + 0x041E : 0x06ef, + 0x041F : 0x06f0, + 0x042F : 0x06f1, + 0x0420 : 0x06f2, + 0x0421 : 0x06f3, + 0x0422 : 0x06f4, + 0x0423 : 0x06f5, + 0x0416 : 0x06f6, + 0x0412 : 0x06f7, + 0x042C : 0x06f8, + 0x042B : 0x06f9, + 0x0417 : 0x06fa, + 0x0428 : 0x06fb, + 0x042D : 0x06fc, + 0x0429 : 0x06fd, + 0x0427 : 0x06fe, + 0x042A : 0x06ff, + 0x0386 : 0x07a1, + 0x0388 : 0x07a2, + 0x0389 : 0x07a3, + 0x038A : 0x07a4, + 0x03AA : 0x07a5, + 0x038C : 0x07a7, + 0x038E : 0x07a8, + 0x03AB : 0x07a9, + 0x038F : 0x07ab, + 0x0385 : 0x07ae, + 0x2015 : 0x07af, + 0x03AC : 0x07b1, + 0x03AD : 0x07b2, + 0x03AE : 0x07b3, + 0x03AF : 0x07b4, + 0x03CA : 0x07b5, + 0x0390 : 0x07b6, + 0x03CC : 0x07b7, + 0x03CD : 0x07b8, + 0x03CB : 0x07b9, + 0x03B0 : 0x07ba, + 0x03CE : 0x07bb, + 0x0391 : 0x07c1, + 0x0392 : 0x07c2, + 0x0393 : 0x07c3, + 0x0394 : 0x07c4, + 0x0395 : 0x07c5, + 0x0396 : 0x07c6, + 0x0397 : 0x07c7, + 0x0398 : 0x07c8, + 0x0399 : 0x07c9, + 0x039A : 0x07ca, + 0x039B : 0x07cb, + 0x039C : 0x07cc, + 0x039D : 0x07cd, + 0x039E : 0x07ce, + 0x039F : 0x07cf, + 0x03A0 : 0x07d0, + 0x03A1 : 0x07d1, + 0x03A3 : 0x07d2, + 0x03A4 : 0x07d4, + 0x03A5 : 0x07d5, + 0x03A6 : 0x07d6, + 0x03A7 : 0x07d7, + 0x03A8 : 0x07d8, + 0x03A9 : 0x07d9, + 0x03B1 : 0x07e1, + 0x03B2 : 0x07e2, + 0x03B3 : 0x07e3, + 0x03B4 : 0x07e4, + 0x03B5 : 0x07e5, + 0x03B6 : 0x07e6, + 0x03B7 : 0x07e7, + 0x03B8 : 0x07e8, + 0x03B9 : 0x07e9, + 0x03BA : 0x07ea, + 0x03BB : 0x07eb, + 0x03BC : 0x07ec, + 0x03BD : 0x07ed, + 0x03BE : 0x07ee, + 0x03BF : 0x07ef, + 0x03C0 : 0x07f0, + 0x03C1 : 0x07f1, + 0x03C3 : 0x07f2, + 0x03C2 : 0x07f3, + 0x03C4 : 0x07f4, + 0x03C5 : 0x07f5, + 0x03C6 : 0x07f6, + 0x03C7 : 0x07f7, + 0x03C8 : 0x07f8, + 0x03C9 : 0x07f9, + 0x23B7 : 0x08a1, + 0x2320 : 0x08a4, + 0x2321 : 0x08a5, + 0x23A1 : 0x08a7, + 0x23A3 : 0x08a8, + 0x23A4 : 0x08a9, + 0x23A6 : 0x08aa, + 0x239B : 0x08ab, + 0x239D : 0x08ac, + 0x239E : 0x08ad, + 0x23A0 : 0x08ae, + 0x23A8 : 0x08af, + 0x23AC : 0x08b0, + 0x2264 : 0x08bc, + 0x2260 : 0x08bd, + 0x2265 : 0x08be, + 0x222B : 0x08bf, + 0x2234 : 0x08c0, + 0x221D : 0x08c1, + 0x221E : 0x08c2, + 0x2207 : 0x08c5, + 0x223C : 0x08c8, + 0x2243 : 0x08c9, + 0x21D4 : 0x08cd, + 0x21D2 : 0x08ce, + 0x2261 : 0x08cf, + 0x221A : 0x08d6, + 0x2282 : 0x08da, + 0x2283 : 0x08db, + 0x2229 : 0x08dc, + 0x222A : 0x08dd, + 0x2227 : 0x08de, + 0x2228 : 0x08df, + 0x2202 : 0x08ef, + 0x0192 : 0x08f6, + 0x2190 : 0x08fb, + 0x2191 : 0x08fc, + 0x2192 : 0x08fd, + 0x2193 : 0x08fe, + 0x25C6 : 0x09e0, + 0x2592 : 0x09e1, + 0x2409 : 0x09e2, + 0x240C : 0x09e3, + 0x240D : 0x09e4, + 0x240A : 0x09e5, + 0x2424 : 0x09e8, + 0x240B : 0x09e9, + 0x2518 : 0x09ea, + 0x2510 : 0x09eb, + 0x250C : 0x09ec, + 0x2514 : 0x09ed, + 0x253C : 0x09ee, + 0x23BA : 0x09ef, + 0x23BB : 0x09f0, + 0x2500 : 0x09f1, + 0x23BC : 0x09f2, + 0x23BD : 0x09f3, + 0x251C : 0x09f4, + 0x2524 : 0x09f5, + 0x2534 : 0x09f6, + 0x252C : 0x09f7, + 0x2502 : 0x09f8, + 0x2003 : 0x0aa1, + 0x2002 : 0x0aa2, + 0x2004 : 0x0aa3, + 0x2005 : 0x0aa4, + 0x2007 : 0x0aa5, + 0x2008 : 0x0aa6, + 0x2009 : 0x0aa7, + 0x200A : 0x0aa8, + 0x2014 : 0x0aa9, + 0x2013 : 0x0aaa, + 0x2026 : 0x0aae, + 0x2025 : 0x0aaf, + 0x2153 : 0x0ab0, + 0x2154 : 0x0ab1, + 0x2155 : 0x0ab2, + 0x2156 : 0x0ab3, + 0x2157 : 0x0ab4, + 0x2158 : 0x0ab5, + 0x2159 : 0x0ab6, + 0x215A : 0x0ab7, + 0x2105 : 0x0ab8, + 0x2012 : 0x0abb, + 0x215B : 0x0ac3, + 0x215C : 0x0ac4, + 0x215D : 0x0ac5, + 0x215E : 0x0ac6, + 0x2122 : 0x0ac9, + 0x2018 : 0x0ad0, + 0x2019 : 0x0ad1, + 0x201C : 0x0ad2, + 0x201D : 0x0ad3, + 0x211E : 0x0ad4, + 0x2032 : 0x0ad6, + 0x2033 : 0x0ad7, + 0x271D : 0x0ad9, + 0x2663 : 0x0aec, + 0x2666 : 0x0aed, + 0x2665 : 0x0aee, + 0x2720 : 0x0af0, + 0x2020 : 0x0af1, + 0x2021 : 0x0af2, + 0x2713 : 0x0af3, + 0x2717 : 0x0af4, + 0x266F : 0x0af5, + 0x266D : 0x0af6, + 0x2642 : 0x0af7, + 0x2640 : 0x0af8, + 0x260E : 0x0af9, + 0x2315 : 0x0afa, + 0x2117 : 0x0afb, + 0x2038 : 0x0afc, + 0x201A : 0x0afd, + 0x201E : 0x0afe, + 0x22A4 : 0x0bc2, + 0x230A : 0x0bc4, + 0x2218 : 0x0bca, + 0x2395 : 0x0bcc, + 0x22A5 : 0x0bce, + 0x25CB : 0x0bcf, + 0x2308 : 0x0bd3, + 0x22A3 : 0x0bdc, + 0x22A2 : 0x0bfc, + 0x2017 : 0x0cdf, + 0x05D0 : 0x0ce0, + 0x05D1 : 0x0ce1, + 0x05D2 : 0x0ce2, + 0x05D3 : 0x0ce3, + 0x05D4 : 0x0ce4, + 0x05D5 : 0x0ce5, + 0x05D6 : 0x0ce6, + 0x05D7 : 0x0ce7, + 0x05D8 : 0x0ce8, + 0x05D9 : 0x0ce9, + 0x05DA : 0x0cea, + 0x05DB : 0x0ceb, + 0x05DC : 0x0cec, + 0x05DD : 0x0ced, + 0x05DE : 0x0cee, + 0x05DF : 0x0cef, + 0x05E0 : 0x0cf0, + 0x05E1 : 0x0cf1, + 0x05E2 : 0x0cf2, + 0x05E3 : 0x0cf3, + 0x05E4 : 0x0cf4, + 0x05E5 : 0x0cf5, + 0x05E6 : 0x0cf6, + 0x05E7 : 0x0cf7, + 0x05E8 : 0x0cf8, + 0x05E9 : 0x0cf9, + 0x05EA : 0x0cfa, + 0x0E01 : 0x0da1, + 0x0E02 : 0x0da2, + 0x0E03 : 0x0da3, + 0x0E04 : 0x0da4, + 0x0E05 : 0x0da5, + 0x0E06 : 0x0da6, + 0x0E07 : 0x0da7, + 0x0E08 : 0x0da8, + 0x0E09 : 0x0da9, + 0x0E0A : 0x0daa, + 0x0E0B : 0x0dab, + 0x0E0C : 0x0dac, + 0x0E0D : 0x0dad, + 0x0E0E : 0x0dae, + 0x0E0F : 0x0daf, + 0x0E10 : 0x0db0, + 0x0E11 : 0x0db1, + 0x0E12 : 0x0db2, + 0x0E13 : 0x0db3, + 0x0E14 : 0x0db4, + 0x0E15 : 0x0db5, + 0x0E16 : 0x0db6, + 0x0E17 : 0x0db7, + 0x0E18 : 0x0db8, + 0x0E19 : 0x0db9, + 0x0E1A : 0x0dba, + 0x0E1B : 0x0dbb, + 0x0E1C : 0x0dbc, + 0x0E1D : 0x0dbd, + 0x0E1E : 0x0dbe, + 0x0E1F : 0x0dbf, + 0x0E20 : 0x0dc0, + 0x0E21 : 0x0dc1, + 0x0E22 : 0x0dc2, + 0x0E23 : 0x0dc3, + 0x0E24 : 0x0dc4, + 0x0E25 : 0x0dc5, + 0x0E26 : 0x0dc6, + 0x0E27 : 0x0dc7, + 0x0E28 : 0x0dc8, + 0x0E29 : 0x0dc9, + 0x0E2A : 0x0dca, + 0x0E2B : 0x0dcb, + 0x0E2C : 0x0dcc, + 0x0E2D : 0x0dcd, + 0x0E2E : 0x0dce, + 0x0E2F : 0x0dcf, + 0x0E30 : 0x0dd0, + 0x0E31 : 0x0dd1, + 0x0E32 : 0x0dd2, + 0x0E33 : 0x0dd3, + 0x0E34 : 0x0dd4, + 0x0E35 : 0x0dd5, + 0x0E36 : 0x0dd6, + 0x0E37 : 0x0dd7, + 0x0E38 : 0x0dd8, + 0x0E39 : 0x0dd9, + 0x0E3A : 0x0dda, + 0x0E3F : 0x0ddf, + 0x0E40 : 0x0de0, + 0x0E41 : 0x0de1, + 0x0E42 : 0x0de2, + 0x0E43 : 0x0de3, + 0x0E44 : 0x0de4, + 0x0E45 : 0x0de5, + 0x0E46 : 0x0de6, + 0x0E47 : 0x0de7, + 0x0E48 : 0x0de8, + 0x0E49 : 0x0de9, + 0x0E4A : 0x0dea, + 0x0E4B : 0x0deb, + 0x0E4C : 0x0dec, + 0x0E4D : 0x0ded, + 0x0E50 : 0x0df0, + 0x0E51 : 0x0df1, + 0x0E52 : 0x0df2, + 0x0E53 : 0x0df3, + 0x0E54 : 0x0df4, + 0x0E55 : 0x0df5, + 0x0E56 : 0x0df6, + 0x0E57 : 0x0df7, + 0x0E58 : 0x0df8, + 0x0E59 : 0x0df9, + 0x0587 : 0x1000587, + 0x0589 : 0x1000589, + 0x055D : 0x100055d, + 0x058A : 0x100058a, + 0x055C : 0x100055c, + 0x055B : 0x100055b, + 0x055E : 0x100055e, + 0x0531 : 0x1000531, + 0x0561 : 0x1000561, + 0x0532 : 0x1000532, + 0x0562 : 0x1000562, + 0x0533 : 0x1000533, + 0x0563 : 0x1000563, + 0x0534 : 0x1000534, + 0x0564 : 0x1000564, + 0x0535 : 0x1000535, + 0x0565 : 0x1000565, + 0x0536 : 0x1000536, + 0x0566 : 0x1000566, + 0x0537 : 0x1000537, + 0x0567 : 0x1000567, + 0x0538 : 0x1000538, + 0x0568 : 0x1000568, + 0x0539 : 0x1000539, + 0x0569 : 0x1000569, + 0x053A : 0x100053a, + 0x056A : 0x100056a, + 0x053B : 0x100053b, + 0x056B : 0x100056b, + 0x053C : 0x100053c, + 0x056C : 0x100056c, + 0x053D : 0x100053d, + 0x056D : 0x100056d, + 0x053E : 0x100053e, + 0x056E : 0x100056e, + 0x053F : 0x100053f, + 0x056F : 0x100056f, + 0x0540 : 0x1000540, + 0x0570 : 0x1000570, + 0x0541 : 0x1000541, + 0x0571 : 0x1000571, + 0x0542 : 0x1000542, + 0x0572 : 0x1000572, + 0x0543 : 0x1000543, + 0x0573 : 0x1000573, + 0x0544 : 0x1000544, + 0x0574 : 0x1000574, + 0x0545 : 0x1000545, + 0x0575 : 0x1000575, + 0x0546 : 0x1000546, + 0x0576 : 0x1000576, + 0x0547 : 0x1000547, + 0x0577 : 0x1000577, + 0x0548 : 0x1000548, + 0x0578 : 0x1000578, + 0x0549 : 0x1000549, + 0x0579 : 0x1000579, + 0x054A : 0x100054a, + 0x057A : 0x100057a, + 0x054B : 0x100054b, + 0x057B : 0x100057b, + 0x054C : 0x100054c, + 0x057C : 0x100057c, + 0x054D : 0x100054d, + 0x057D : 0x100057d, + 0x054E : 0x100054e, + 0x057E : 0x100057e, + 0x054F : 0x100054f, + 0x057F : 0x100057f, + 0x0550 : 0x1000550, + 0x0580 : 0x1000580, + 0x0551 : 0x1000551, + 0x0581 : 0x1000581, + 0x0552 : 0x1000552, + 0x0582 : 0x1000582, + 0x0553 : 0x1000553, + 0x0583 : 0x1000583, + 0x0554 : 0x1000554, + 0x0584 : 0x1000584, + 0x0555 : 0x1000555, + 0x0585 : 0x1000585, + 0x0556 : 0x1000556, + 0x0586 : 0x1000586, + 0x055A : 0x100055a, + 0x10D0 : 0x10010d0, + 0x10D1 : 0x10010d1, + 0x10D2 : 0x10010d2, + 0x10D3 : 0x10010d3, + 0x10D4 : 0x10010d4, + 0x10D5 : 0x10010d5, + 0x10D6 : 0x10010d6, + 0x10D7 : 0x10010d7, + 0x10D8 : 0x10010d8, + 0x10D9 : 0x10010d9, + 0x10DA : 0x10010da, + 0x10DB : 0x10010db, + 0x10DC : 0x10010dc, + 0x10DD : 0x10010dd, + 0x10DE : 0x10010de, + 0x10DF : 0x10010df, + 0x10E0 : 0x10010e0, + 0x10E1 : 0x10010e1, + 0x10E2 : 0x10010e2, + 0x10E3 : 0x10010e3, + 0x10E4 : 0x10010e4, + 0x10E5 : 0x10010e5, + 0x10E6 : 0x10010e6, + 0x10E7 : 0x10010e7, + 0x10E8 : 0x10010e8, + 0x10E9 : 0x10010e9, + 0x10EA : 0x10010ea, + 0x10EB : 0x10010eb, + 0x10EC : 0x10010ec, + 0x10ED : 0x10010ed, + 0x10EE : 0x10010ee, + 0x10EF : 0x10010ef, + 0x10F0 : 0x10010f0, + 0x10F1 : 0x10010f1, + 0x10F2 : 0x10010f2, + 0x10F3 : 0x10010f3, + 0x10F4 : 0x10010f4, + 0x10F5 : 0x10010f5, + 0x10F6 : 0x10010f6, + 0x1E8A : 0x1001e8a, + 0x012C : 0x100012c, + 0x01B5 : 0x10001b5, + 0x01E6 : 0x10001e6, + 0x01D2 : 0x10001d1, + 0x019F : 0x100019f, + 0x1E8B : 0x1001e8b, + 0x012D : 0x100012d, + 0x01B6 : 0x10001b6, + 0x01E7 : 0x10001e7, + 0x01D2 : 0x10001d2, + 0x0275 : 0x1000275, + 0x018F : 0x100018f, + 0x0259 : 0x1000259, + 0x1E36 : 0x1001e36, + 0x1E37 : 0x1001e37, + 0x1EA0 : 0x1001ea0, + 0x1EA1 : 0x1001ea1, + 0x1EA2 : 0x1001ea2, + 0x1EA3 : 0x1001ea3, + 0x1EA4 : 0x1001ea4, + 0x1EA5 : 0x1001ea5, + 0x1EA6 : 0x1001ea6, + 0x1EA7 : 0x1001ea7, + 0x1EA8 : 0x1001ea8, + 0x1EA9 : 0x1001ea9, + 0x1EAA : 0x1001eaa, + 0x1EAB : 0x1001eab, + 0x1EAC : 0x1001eac, + 0x1EAD : 0x1001ead, + 0x1EAE : 0x1001eae, + 0x1EAF : 0x1001eaf, + 0x1EB0 : 0x1001eb0, + 0x1EB1 : 0x1001eb1, + 0x1EB2 : 0x1001eb2, + 0x1EB3 : 0x1001eb3, + 0x1EB4 : 0x1001eb4, + 0x1EB5 : 0x1001eb5, + 0x1EB6 : 0x1001eb6, + 0x1EB7 : 0x1001eb7, + 0x1EB8 : 0x1001eb8, + 0x1EB9 : 0x1001eb9, + 0x1EBA : 0x1001eba, + 0x1EBB : 0x1001ebb, + 0x1EBC : 0x1001ebc, + 0x1EBD : 0x1001ebd, + 0x1EBE : 0x1001ebe, + 0x1EBF : 0x1001ebf, + 0x1EC0 : 0x1001ec0, + 0x1EC1 : 0x1001ec1, + 0x1EC2 : 0x1001ec2, + 0x1EC3 : 0x1001ec3, + 0x1EC4 : 0x1001ec4, + 0x1EC5 : 0x1001ec5, + 0x1EC6 : 0x1001ec6, + 0x1EC7 : 0x1001ec7, + 0x1EC8 : 0x1001ec8, + 0x1EC9 : 0x1001ec9, + 0x1ECA : 0x1001eca, + 0x1ECB : 0x1001ecb, + 0x1ECC : 0x1001ecc, + 0x1ECD : 0x1001ecd, + 0x1ECE : 0x1001ece, + 0x1ECF : 0x1001ecf, + 0x1ED0 : 0x1001ed0, + 0x1ED1 : 0x1001ed1, + 0x1ED2 : 0x1001ed2, + 0x1ED3 : 0x1001ed3, + 0x1ED4 : 0x1001ed4, + 0x1ED5 : 0x1001ed5, + 0x1ED6 : 0x1001ed6, + 0x1ED7 : 0x1001ed7, + 0x1ED8 : 0x1001ed8, + 0x1ED9 : 0x1001ed9, + 0x1EDA : 0x1001eda, + 0x1EDB : 0x1001edb, + 0x1EDC : 0x1001edc, + 0x1EDD : 0x1001edd, + 0x1EDE : 0x1001ede, + 0x1EDF : 0x1001edf, + 0x1EE0 : 0x1001ee0, + 0x1EE1 : 0x1001ee1, + 0x1EE2 : 0x1001ee2, + 0x1EE3 : 0x1001ee3, + 0x1EE4 : 0x1001ee4, + 0x1EE5 : 0x1001ee5, + 0x1EE6 : 0x1001ee6, + 0x1EE7 : 0x1001ee7, + 0x1EE8 : 0x1001ee8, + 0x1EE9 : 0x1001ee9, + 0x1EEA : 0x1001eea, + 0x1EEB : 0x1001eeb, + 0x1EEC : 0x1001eec, + 0x1EED : 0x1001eed, + 0x1EEE : 0x1001eee, + 0x1EEF : 0x1001eef, + 0x1EF0 : 0x1001ef0, + 0x1EF1 : 0x1001ef1, + 0x1EF4 : 0x1001ef4, + 0x1EF5 : 0x1001ef5, + 0x1EF6 : 0x1001ef6, + 0x1EF7 : 0x1001ef7, + 0x1EF8 : 0x1001ef8, + 0x1EF9 : 0x1001ef9, + 0x01A0 : 0x10001a0, + 0x01A1 : 0x10001a1, + 0x01AF : 0x10001af, + 0x01B0 : 0x10001b0, + 0x20A0 : 0x10020a0, + 0x20A1 : 0x10020a1, + 0x20A2 : 0x10020a2, + 0x20A3 : 0x10020a3, + 0x20A4 : 0x10020a4, + 0x20A5 : 0x10020a5, + 0x20A6 : 0x10020a6, + 0x20A7 : 0x10020a7, + 0x20A8 : 0x10020a8, + 0x20A9 : 0x10020a9, + 0x20AA : 0x10020aa, + 0x20AB : 0x10020ab, + 0x20AC : 0x20ac, + 0x2070 : 0x1002070, + 0x2074 : 0x1002074, + 0x2075 : 0x1002075, + 0x2076 : 0x1002076, + 0x2077 : 0x1002077, + 0x2078 : 0x1002078, + 0x2079 : 0x1002079, + 0x2080 : 0x1002080, + 0x2081 : 0x1002081, + 0x2082 : 0x1002082, + 0x2083 : 0x1002083, + 0x2084 : 0x1002084, + 0x2085 : 0x1002085, + 0x2086 : 0x1002086, + 0x2087 : 0x1002087, + 0x2088 : 0x1002088, + 0x2089 : 0x1002089, + 0x2202 : 0x1002202, + 0x2205 : 0x1002205, + 0x2208 : 0x1002208, + 0x2209 : 0x1002209, + 0x220B : 0x100220B, + 0x221A : 0x100221A, + 0x221B : 0x100221B, + 0x221C : 0x100221C, + 0x222C : 0x100222C, + 0x222D : 0x100222D, + 0x2235 : 0x1002235, + 0x2245 : 0x1002248, + 0x2247 : 0x1002247, + 0x2262 : 0x1002262, + 0x2263 : 0x1002263, + 0x2800 : 0x1002800, + 0x2801 : 0x1002801, + 0x2802 : 0x1002802, + 0x2803 : 0x1002803, + 0x2804 : 0x1002804, + 0x2805 : 0x1002805, + 0x2806 : 0x1002806, + 0x2807 : 0x1002807, + 0x2808 : 0x1002808, + 0x2809 : 0x1002809, + 0x280a : 0x100280a, + 0x280b : 0x100280b, + 0x280c : 0x100280c, + 0x280d : 0x100280d, + 0x280e : 0x100280e, + 0x280f : 0x100280f, + 0x2810 : 0x1002810, + 0x2811 : 0x1002811, + 0x2812 : 0x1002812, + 0x2813 : 0x1002813, + 0x2814 : 0x1002814, + 0x2815 : 0x1002815, + 0x2816 : 0x1002816, + 0x2817 : 0x1002817, + 0x2818 : 0x1002818, + 0x2819 : 0x1002819, + 0x281a : 0x100281a, + 0x281b : 0x100281b, + 0x281c : 0x100281c, + 0x281d : 0x100281d, + 0x281e : 0x100281e, + 0x281f : 0x100281f, + 0x2820 : 0x1002820, + 0x2821 : 0x1002821, + 0x2822 : 0x1002822, + 0x2823 : 0x1002823, + 0x2824 : 0x1002824, + 0x2825 : 0x1002825, + 0x2826 : 0x1002826, + 0x2827 : 0x1002827, + 0x2828 : 0x1002828, + 0x2829 : 0x1002829, + 0x282a : 0x100282a, + 0x282b : 0x100282b, + 0x282c : 0x100282c, + 0x282d : 0x100282d, + 0x282e : 0x100282e, + 0x282f : 0x100282f, + 0x2830 : 0x1002830, + 0x2831 : 0x1002831, + 0x2832 : 0x1002832, + 0x2833 : 0x1002833, + 0x2834 : 0x1002834, + 0x2835 : 0x1002835, + 0x2836 : 0x1002836, + 0x2837 : 0x1002837, + 0x2838 : 0x1002838, + 0x2839 : 0x1002839, + 0x283a : 0x100283a, + 0x283b : 0x100283b, + 0x283c : 0x100283c, + 0x283d : 0x100283d, + 0x283e : 0x100283e, + 0x283f : 0x100283f, + 0x2840 : 0x1002840, + 0x2841 : 0x1002841, + 0x2842 : 0x1002842, + 0x2843 : 0x1002843, + 0x2844 : 0x1002844, + 0x2845 : 0x1002845, + 0x2846 : 0x1002846, + 0x2847 : 0x1002847, + 0x2848 : 0x1002848, + 0x2849 : 0x1002849, + 0x284a : 0x100284a, + 0x284b : 0x100284b, + 0x284c : 0x100284c, + 0x284d : 0x100284d, + 0x284e : 0x100284e, + 0x284f : 0x100284f, + 0x2850 : 0x1002850, + 0x2851 : 0x1002851, + 0x2852 : 0x1002852, + 0x2853 : 0x1002853, + 0x2854 : 0x1002854, + 0x2855 : 0x1002855, + 0x2856 : 0x1002856, + 0x2857 : 0x1002857, + 0x2858 : 0x1002858, + 0x2859 : 0x1002859, + 0x285a : 0x100285a, + 0x285b : 0x100285b, + 0x285c : 0x100285c, + 0x285d : 0x100285d, + 0x285e : 0x100285e, + 0x285f : 0x100285f, + 0x2860 : 0x1002860, + 0x2861 : 0x1002861, + 0x2862 : 0x1002862, + 0x2863 : 0x1002863, + 0x2864 : 0x1002864, + 0x2865 : 0x1002865, + 0x2866 : 0x1002866, + 0x2867 : 0x1002867, + 0x2868 : 0x1002868, + 0x2869 : 0x1002869, + 0x286a : 0x100286a, + 0x286b : 0x100286b, + 0x286c : 0x100286c, + 0x286d : 0x100286d, + 0x286e : 0x100286e, + 0x286f : 0x100286f, + 0x2870 : 0x1002870, + 0x2871 : 0x1002871, + 0x2872 : 0x1002872, + 0x2873 : 0x1002873, + 0x2874 : 0x1002874, + 0x2875 : 0x1002875, + 0x2876 : 0x1002876, + 0x2877 : 0x1002877, + 0x2878 : 0x1002878, + 0x2879 : 0x1002879, + 0x287a : 0x100287a, + 0x287b : 0x100287b, + 0x287c : 0x100287c, + 0x287d : 0x100287d, + 0x287e : 0x100287e, + 0x287f : 0x100287f, + 0x2880 : 0x1002880, + 0x2881 : 0x1002881, + 0x2882 : 0x1002882, + 0x2883 : 0x1002883, + 0x2884 : 0x1002884, + 0x2885 : 0x1002885, + 0x2886 : 0x1002886, + 0x2887 : 0x1002887, + 0x2888 : 0x1002888, + 0x2889 : 0x1002889, + 0x288a : 0x100288a, + 0x288b : 0x100288b, + 0x288c : 0x100288c, + 0x288d : 0x100288d, + 0x288e : 0x100288e, + 0x288f : 0x100288f, + 0x2890 : 0x1002890, + 0x2891 : 0x1002891, + 0x2892 : 0x1002892, + 0x2893 : 0x1002893, + 0x2894 : 0x1002894, + 0x2895 : 0x1002895, + 0x2896 : 0x1002896, + 0x2897 : 0x1002897, + 0x2898 : 0x1002898, + 0x2899 : 0x1002899, + 0x289a : 0x100289a, + 0x289b : 0x100289b, + 0x289c : 0x100289c, + 0x289d : 0x100289d, + 0x289e : 0x100289e, + 0x289f : 0x100289f, + 0x28a0 : 0x10028a0, + 0x28a1 : 0x10028a1, + 0x28a2 : 0x10028a2, + 0x28a3 : 0x10028a3, + 0x28a4 : 0x10028a4, + 0x28a5 : 0x10028a5, + 0x28a6 : 0x10028a6, + 0x28a7 : 0x10028a7, + 0x28a8 : 0x10028a8, + 0x28a9 : 0x10028a9, + 0x28aa : 0x10028aa, + 0x28ab : 0x10028ab, + 0x28ac : 0x10028ac, + 0x28ad : 0x10028ad, + 0x28ae : 0x10028ae, + 0x28af : 0x10028af, + 0x28b0 : 0x10028b0, + 0x28b1 : 0x10028b1, + 0x28b2 : 0x10028b2, + 0x28b3 : 0x10028b3, + 0x28b4 : 0x10028b4, + 0x28b5 : 0x10028b5, + 0x28b6 : 0x10028b6, + 0x28b7 : 0x10028b7, + 0x28b8 : 0x10028b8, + 0x28b9 : 0x10028b9, + 0x28ba : 0x10028ba, + 0x28bb : 0x10028bb, + 0x28bc : 0x10028bc, + 0x28bd : 0x10028bd, + 0x28be : 0x10028be, + 0x28bf : 0x10028bf, + 0x28c0 : 0x10028c0, + 0x28c1 : 0x10028c1, + 0x28c2 : 0x10028c2, + 0x28c3 : 0x10028c3, + 0x28c4 : 0x10028c4, + 0x28c5 : 0x10028c5, + 0x28c6 : 0x10028c6, + 0x28c7 : 0x10028c7, + 0x28c8 : 0x10028c8, + 0x28c9 : 0x10028c9, + 0x28ca : 0x10028ca, + 0x28cb : 0x10028cb, + 0x28cc : 0x10028cc, + 0x28cd : 0x10028cd, + 0x28ce : 0x10028ce, + 0x28cf : 0x10028cf, + 0x28d0 : 0x10028d0, + 0x28d1 : 0x10028d1, + 0x28d2 : 0x10028d2, + 0x28d3 : 0x10028d3, + 0x28d4 : 0x10028d4, + 0x28d5 : 0x10028d5, + 0x28d6 : 0x10028d6, + 0x28d7 : 0x10028d7, + 0x28d8 : 0x10028d8, + 0x28d9 : 0x10028d9, + 0x28da : 0x10028da, + 0x28db : 0x10028db, + 0x28dc : 0x10028dc, + 0x28dd : 0x10028dd, + 0x28de : 0x10028de, + 0x28df : 0x10028df, + 0x28e0 : 0x10028e0, + 0x28e1 : 0x10028e1, + 0x28e2 : 0x10028e2, + 0x28e3 : 0x10028e3, + 0x28e4 : 0x10028e4, + 0x28e5 : 0x10028e5, + 0x28e6 : 0x10028e6, + 0x28e7 : 0x10028e7, + 0x28e8 : 0x10028e8, + 0x28e9 : 0x10028e9, + 0x28ea : 0x10028ea, + 0x28eb : 0x10028eb, + 0x28ec : 0x10028ec, + 0x28ed : 0x10028ed, + 0x28ee : 0x10028ee, + 0x28ef : 0x10028ef, + 0x28f0 : 0x10028f0, + 0x28f1 : 0x10028f1, + 0x28f2 : 0x10028f2, + 0x28f3 : 0x10028f3, + 0x28f4 : 0x10028f4, + 0x28f5 : 0x10028f5, + 0x28f6 : 0x10028f6, + 0x28f7 : 0x10028f7, + 0x28f8 : 0x10028f8, + 0x28f9 : 0x10028f9, + 0x28fa : 0x10028fa, + 0x28fb : 0x10028fb, + 0x28fc : 0x10028fc, + 0x28fd : 0x10028fd, + 0x28fe : 0x10028fe, + 0x28ff : 0x10028ff +}; \ No newline at end of file diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/jsunzip.js b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/jsunzip.js new file mode 100755 index 0000000..f815218 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/jsunzip.js @@ -0,0 +1,668 @@ +/* + * JSUnzip + * + * Copyright (c) 2011 by Erik Moller + * All Rights Reserved + * + * This software is provided 'as-is', without any express + * or implied warranty. In no event will the authors be + * held liable for any damages arising from the use of + * this software. + * + * Permission is granted to anyone to use this software + * for any purpose, including commercial applications, + * and to alter it and redistribute it freely, subject to + * the following restrictions: + * + * 1. The origin of this software must not be + * misrepresented; you must not claim that you + * wrote the original software. If you use this + * software in a product, an acknowledgment in + * the product documentation would be appreciated + * but is not required. + * + * 2. Altered source versions must be plainly marked + * as such, and must not be misrepresented as + * being the original software. + * + * 3. This notice may not be removed or altered from + * any source distribution. + */ + +var tinf; + +function JSUnzip() { + + this.getInt = function(offset, size) { + switch (size) { + case 4: + return (this.data.charCodeAt(offset + 3) & 0xff) << 24 | + (this.data.charCodeAt(offset + 2) & 0xff) << 16 | + (this.data.charCodeAt(offset + 1) & 0xff) << 8 | + (this.data.charCodeAt(offset + 0) & 0xff); + break; + case 2: + return (this.data.charCodeAt(offset + 1) & 0xff) << 8 | + (this.data.charCodeAt(offset + 0) & 0xff); + break; + default: + return this.data.charCodeAt(offset) & 0xff; + break; + } + }; + + this.getDOSDate = function(dosdate, dostime) { + var day = dosdate & 0x1f; + var month = ((dosdate >> 5) & 0xf) - 1; + var year = 1980 + ((dosdate >> 9) & 0x7f) + var second = (dostime & 0x1f) * 2; + var minute = (dostime >> 5) & 0x3f; + hour = (dostime >> 11) & 0x1f; + return new Date(year, month, day, hour, minute, second); + } + + this.open = function(data) { + this.data = data; + this.files = []; + + if (this.data.length < 22) + return { 'status' : false, 'error' : 'Invalid data' }; + var endOfCentralDirectory = this.data.length - 22; + while (endOfCentralDirectory >= 0 && this.getInt(endOfCentralDirectory, 4) != 0x06054b50) + --endOfCentralDirectory; + if (endOfCentralDirectory < 0) + return { 'status' : false, 'error' : 'Invalid data' }; + if (this.getInt(endOfCentralDirectory + 4, 2) != 0 || this.getInt(endOfCentralDirectory + 6, 2) != 0) + return { 'status' : false, 'error' : 'No multidisk support' }; + + var entriesInThisDisk = this.getInt(endOfCentralDirectory + 8, 2); + var centralDirectoryOffset = this.getInt(endOfCentralDirectory + 16, 4); + var globalCommentLength = this.getInt(endOfCentralDirectory + 20, 2); + this.comment = this.data.slice(endOfCentralDirectory + 22, endOfCentralDirectory + 22 + globalCommentLength); + + var fileOffset = centralDirectoryOffset; + + for (var i = 0; i < entriesInThisDisk; ++i) { + if (this.getInt(fileOffset + 0, 4) != 0x02014b50) + return { 'status' : false, 'error' : 'Invalid data' }; + if (this.getInt(fileOffset + 6, 2) > 20) + return { 'status' : false, 'error' : 'Unsupported version' }; + if (this.getInt(fileOffset + 8, 2) & 1) + return { 'status' : false, 'error' : 'Encryption not implemented' }; + + var compressionMethod = this.getInt(fileOffset + 10, 2); + if (compressionMethod != 0 && compressionMethod != 8) + return { 'status' : false, 'error' : 'Unsupported compression method' }; + + var lastModFileTime = this.getInt(fileOffset + 12, 2); + var lastModFileDate = this.getInt(fileOffset + 14, 2); + var lastModifiedDate = this.getDOSDate(lastModFileDate, lastModFileTime); + + var crc = this.getInt(fileOffset + 16, 4); + // TODO: crc + + var compressedSize = this.getInt(fileOffset + 20, 4); + var uncompressedSize = this.getInt(fileOffset + 24, 4); + + var fileNameLength = this.getInt(fileOffset + 28, 2); + var extraFieldLength = this.getInt(fileOffset + 30, 2); + var fileCommentLength = this.getInt(fileOffset + 32, 2); + + var relativeOffsetOfLocalHeader = this.getInt(fileOffset + 42, 4); + + var fileName = this.data.slice(fileOffset + 46, fileOffset + 46 + fileNameLength); + var fileComment = this.data.slice(fileOffset + 46 + fileNameLength + extraFieldLength, fileOffset + 46 + fileNameLength + extraFieldLength + fileCommentLength); + + if (this.getInt(relativeOffsetOfLocalHeader + 0, 4) != 0x04034b50) + return { 'status' : false, 'error' : 'Invalid data' }; + var localFileNameLength = this.getInt(relativeOffsetOfLocalHeader + 26, 2); + var localExtraFieldLength = this.getInt(relativeOffsetOfLocalHeader + 28, 2); + var localFileContent = relativeOffsetOfLocalHeader + 30 + localFileNameLength + localExtraFieldLength; + + this.files[fileName] = + { + 'fileComment' : fileComment, + 'compressionMethod' : compressionMethod, + 'compressedSize' : compressedSize, + 'uncompressedSize' : uncompressedSize, + 'localFileContent' : localFileContent, + 'lastModifiedDate' : lastModifiedDate + }; + + fileOffset += 46 + fileNameLength + extraFieldLength + fileCommentLength; + } + return { 'status' : true } + }; + + + this.read = function(fileName) { + var fileInfo = this.files[fileName]; + if (fileInfo) { + if (fileInfo.compressionMethod == 8) { + if (!tinf) { + tinf = new TINF(); + tinf.init(); + } + var result = tinf.uncompress(this.data, fileInfo.localFileContent); + if (result.status == tinf.OK) + return { 'status' : true, 'data' : result.data }; + else + return { 'status' : false, 'error' : result.error }; + } else { + return { 'status' : true, 'data' : this.data.slice(fileInfo.localFileContent, fileInfo.localFileContent + fileInfo.uncompressedSize) }; + } + } + return { 'status' : false, 'error' : "File '" + fileName + "' doesn't exist in zip" }; + }; + +}; + + + +/* + * tinflate - tiny inflate + * + * Copyright (c) 2003 by Joergen Ibsen / Jibz + * All Rights Reserved + * + * http://www.ibsensoftware.com/ + * + * This software is provided 'as-is', without any express + * or implied warranty. In no event will the authors be + * held liable for any damages arising from the use of + * this software. + * + * Permission is granted to anyone to use this software + * for any purpose, including commercial applications, + * and to alter it and redistribute it freely, subject to + * the following restrictions: + * + * 1. The origin of this software must not be + * misrepresented; you must not claim that you + * wrote the original software. If you use this + * software in a product, an acknowledgment in + * the product documentation would be appreciated + * but is not required. + * + * 2. Altered source versions must be plainly marked + * as such, and must not be misrepresented as + * being the original software. + * + * 3. This notice may not be removed or altered from + * any source distribution. + */ + +/* + * tinflate javascript port by Erik Moller in May 2011. + * emoller@opera.com + * + * read_bits() patched by mike@imidio.com to allow + * reading more then 8 bits (needed in some zlib streams) + */ + +"use strict"; + +function TINF() { + +this.OK = 0; +this.DATA_ERROR = (-3); +this.WINDOW_SIZE = 32768; + +/* ------------------------------ * + * -- internal data structures -- * + * ------------------------------ */ + +this.TREE = function() { + this.table = new Array(16); /* table of code length counts */ + this.trans = new Array(288); /* code -> symbol translation table */ +}; + +this.DATA = function(that) { + this.source = ''; + this.sourceIndex = 0; + this.tag = 0; + this.bitcount = 0; + + this.dest = []; + + this.history = []; + + this.ltree = new that.TREE(); /* dynamic length/symbol tree */ + this.dtree = new that.TREE(); /* dynamic distance tree */ +}; + +/* --------------------------------------------------- * + * -- uninitialized global data (static structures) -- * + * --------------------------------------------------- */ + +this.sltree = new this.TREE(); /* fixed length/symbol tree */ +this.sdtree = new this.TREE(); /* fixed distance tree */ + +/* extra bits and base tables for length codes */ +this.length_bits = new Array(30); +this.length_base = new Array(30); + +/* extra bits and base tables for distance codes */ +this.dist_bits = new Array(30); +this.dist_base = new Array(30); + +/* special ordering of code length codes */ +this.clcidx = [ + 16, 17, 18, 0, 8, 7, 9, 6, + 10, 5, 11, 4, 12, 3, 13, 2, + 14, 1, 15 +]; + +/* ----------------------- * + * -- utility functions -- * + * ----------------------- */ + +/* build extra bits and base tables */ +this.build_bits_base = function(bits, base, delta, first) +{ + var i, sum; + + /* build bits table */ + for (i = 0; i < delta; ++i) bits[i] = 0; + for (i = 0; i < 30 - delta; ++i) bits[i + delta] = Math.floor(i / delta); + + /* build base table */ + for (sum = first, i = 0; i < 30; ++i) + { + base[i] = sum; + sum += 1 << bits[i]; + } +} + +/* build the fixed huffman trees */ +this.build_fixed_trees = function(lt, dt) +{ + var i; + + /* build fixed length tree */ + for (i = 0; i < 7; ++i) lt.table[i] = 0; + + lt.table[7] = 24; + lt.table[8] = 152; + lt.table[9] = 112; + + for (i = 0; i < 24; ++i) lt.trans[i] = 256 + i; + for (i = 0; i < 144; ++i) lt.trans[24 + i] = i; + for (i = 0; i < 8; ++i) lt.trans[24 + 144 + i] = 280 + i; + for (i = 0; i < 112; ++i) lt.trans[24 + 144 + 8 + i] = 144 + i; + + /* build fixed distance tree */ + for (i = 0; i < 5; ++i) dt.table[i] = 0; + + dt.table[5] = 32; + + for (i = 0; i < 32; ++i) dt.trans[i] = i; +} + +/* given an array of code lengths, build a tree */ +this.build_tree = function(t, lengths, loffset, num) +{ + var offs = new Array(16); + var i, sum; + + /* clear code length count table */ + for (i = 0; i < 16; ++i) t.table[i] = 0; + + /* scan symbol lengths, and sum code length counts */ + for (i = 0; i < num; ++i) t.table[lengths[loffset + i]]++; + + t.table[0] = 0; + + /* compute offset table for distribution sort */ + for (sum = 0, i = 0; i < 16; ++i) + { + offs[i] = sum; + sum += t.table[i]; + } + + /* create code->symbol translation table (symbols sorted by code) */ + for (i = 0; i < num; ++i) + { + if (lengths[loffset + i]) t.trans[offs[lengths[loffset + i]]++] = i; + } +} + +/* ---------------------- * + * -- decode functions -- * + * ---------------------- */ + +/* get one bit from source stream */ +this.getbit = function(d) +{ + var bit; + + /* check if tag is empty */ + if (!d.bitcount--) + { + /* load next tag */ + d.tag = d.source[d.sourceIndex++] & 0xff; + d.bitcount = 7; + } + + /* shift bit out of tag */ + bit = d.tag & 0x01; + d.tag >>= 1; + + return bit; +} + +/* read a num bit value from a stream and add base */ +this.read_bits = function(d, num, base) +{ + if (!num) + return base; + + var val = 0; + while (d.bitcount < 24) { + d.tag = d.tag | (d.source[d.sourceIndex++] & 0xff) << d.bitcount; + d.bitcount += 8; + } + val = d.tag & (0xffff >> (16 - num)); + d.tag >>= num; + d.bitcount -= num; + return val + base; +} + +/* given a data stream and a tree, decode a symbol */ +this.decode_symbol = function(d, t) +{ + while (d.bitcount < 16) { + d.tag = d.tag | (d.source[d.sourceIndex++] & 0xff) << d.bitcount; + d.bitcount += 8; + } + + var sum = 0, cur = 0, len = 0; + do { + cur = 2 * cur + ((d.tag & (1 << len)) >> len); + + ++len; + + sum += t.table[len]; + cur -= t.table[len]; + + } while (cur >= 0); + + d.tag >>= len; + d.bitcount -= len; + + return t.trans[sum + cur]; +} + +/* given a data stream, decode dynamic trees from it */ +this.decode_trees = function(d, lt, dt) +{ + var code_tree = new this.TREE(); + var lengths = new Array(288+32); + var hlit, hdist, hclen; + var i, num, length; + + /* get 5 bits HLIT (257-286) */ + hlit = this.read_bits(d, 5, 257); + + /* get 5 bits HDIST (1-32) */ + hdist = this.read_bits(d, 5, 1); + + /* get 4 bits HCLEN (4-19) */ + hclen = this.read_bits(d, 4, 4); + + for (i = 0; i < 19; ++i) lengths[i] = 0; + + /* read code lengths for code length alphabet */ + for (i = 0; i < hclen; ++i) + { + /* get 3 bits code length (0-7) */ + var clen = this.read_bits(d, 3, 0); + + lengths[this.clcidx[i]] = clen; + } + + /* build code length tree */ + this.build_tree(code_tree, lengths, 0, 19); + + /* decode code lengths for the dynamic trees */ + for (num = 0; num < hlit + hdist; ) + { + var sym = this.decode_symbol(d, code_tree); + + switch (sym) + { + case 16: + /* copy previous code length 3-6 times (read 2 bits) */ + { + var prev = lengths[num - 1]; + for (length = this.read_bits(d, 2, 3); length; --length) + { + lengths[num++] = prev; + } + } + break; + case 17: + /* repeat code length 0 for 3-10 times (read 3 bits) */ + for (length = this.read_bits(d, 3, 3); length; --length) + { + lengths[num++] = 0; + } + break; + case 18: + /* repeat code length 0 for 11-138 times (read 7 bits) */ + for (length = this.read_bits(d, 7, 11); length; --length) + { + lengths[num++] = 0; + } + break; + default: + /* values 0-15 represent the actual code lengths */ + lengths[num++] = sym; + break; + } + } + + /* build dynamic trees */ + this.build_tree(lt, lengths, 0, hlit); + this.build_tree(dt, lengths, hlit, hdist); +} + +/* ----------------------------- * + * -- block inflate functions -- * + * ----------------------------- */ + +/* given a stream and two trees, inflate a block of data */ +this.inflate_block_data = function(d, lt, dt) +{ + // js optimization. + var ddest = d.dest; + var ddestlength = ddest.length; + + while (1) + { + var sym = this.decode_symbol(d, lt); + + /* check for end of block */ + if (sym == 256) + { + return this.OK; + } + + if (sym < 256) + { + ddest[ddestlength++] = sym; // ? String.fromCharCode(sym); + d.history.push(sym); + } else { + + var length, dist, offs; + var i; + + sym -= 257; + + /* possibly get more bits from length code */ + length = this.read_bits(d, this.length_bits[sym], this.length_base[sym]); + + dist = this.decode_symbol(d, dt); + + /* possibly get more bits from distance code */ + offs = d.history.length - this.read_bits(d, this.dist_bits[dist], this.dist_base[dist]); + + if (offs < 0) + throw ("Invalid zlib offset " + offs); + + /* copy match */ + for (i = offs; i < offs + length; ++i) { + //ddest[ddestlength++] = ddest[i]; + ddest[ddestlength++] = d.history[i]; + d.history.push(d.history[i]); + } + } + } +} + +/* inflate an uncompressed block of data */ +this.inflate_uncompressed_block = function(d) +{ + var length, invlength; + var i; + + if (d.bitcount > 7) { + var overflow = Math.floor(d.bitcount / 8); + d.sourceIndex -= overflow; + d.bitcount = 0; + d.tag = 0; + } + + /* get length */ + length = d.source[d.sourceIndex+1]; + length = 256*length + d.source[d.sourceIndex]; + + /* get one's complement of length */ + invlength = d.source[d.sourceIndex+3]; + invlength = 256*invlength + d.source[d.sourceIndex+2]; + + /* check length */ + if (length != (~invlength & 0x0000ffff)) return this.DATA_ERROR; + + d.sourceIndex += 4; + + /* copy block */ + for (i = length; i; --i) { + d.history.push(d.source[d.sourceIndex]); + d.dest[d.dest.length] = d.source[d.sourceIndex++]; + } + + /* make sure we start next block on a byte boundary */ + d.bitcount = 0; + + return this.OK; +} + +/* inflate a block of data compressed with fixed huffman trees */ +this.inflate_fixed_block = function(d) +{ + /* decode block using fixed trees */ + return this.inflate_block_data(d, this.sltree, this.sdtree); +} + +/* inflate a block of data compressed with dynamic huffman trees */ +this.inflate_dynamic_block = function(d) +{ + /* decode trees from stream */ + this.decode_trees(d, d.ltree, d.dtree); + + /* decode block using decoded trees */ + return this.inflate_block_data(d, d.ltree, d.dtree); +} + +/* ---------------------- * + * -- public functions -- * + * ---------------------- */ + +/* initialize global (static) data */ +this.init = function() +{ + /* build fixed huffman trees */ + this.build_fixed_trees(this.sltree, this.sdtree); + + /* build extra bits and base tables */ + this.build_bits_base(this.length_bits, this.length_base, 4, 3); + this.build_bits_base(this.dist_bits, this.dist_base, 2, 1); + + /* fix a special case */ + this.length_bits[28] = 0; + this.length_base[28] = 258; + + this.reset(); +} + +this.reset = function() +{ + this.d = new this.DATA(this); + delete this.header; +} + +/* inflate stream from source to dest */ +this.uncompress = function(source, offset) +{ + + var d = this.d; + var bfinal; + + /* initialise data */ + d.source = source; + d.sourceIndex = offset; + d.bitcount = 0; + + d.dest = []; + + // Skip zlib header at start of stream + if (typeof this.header == 'undefined') { + this.header = this.read_bits(d, 16, 0); + /* byte 0: 0x78, 7 = 32k window size, 8 = deflate */ + /* byte 1: check bits for header and other flags */ + } + + var blocks = 0; + + do { + + var btype; + var res; + + /* read final block flag */ + bfinal = this.getbit(d); + + /* read block type (2 bits) */ + btype = this.read_bits(d, 2, 0); + + /* decompress block */ + switch (btype) + { + case 0: + /* decompress uncompressed block */ + res = this.inflate_uncompressed_block(d); + break; + case 1: + /* decompress block with fixed huffman trees */ + res = this.inflate_fixed_block(d); + break; + case 2: + /* decompress block with dynamic huffman trees */ + res = this.inflate_dynamic_block(d); + break; + default: + return { 'status' : this.DATA_ERROR }; + } + + if (res != this.OK) return { 'status' : this.DATA_ERROR }; + blocks++; + + } while (!bfinal && d.sourceIndex < d.source.length); + + d.history = d.history.slice(-this.WINDOW_SIZE); + + return { 'status' : this.OK, 'data' : d.dest }; +} + +}; diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/logo.js b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/logo.js new file mode 100644 index 0000000..befa598 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/logo.js @@ -0,0 +1 @@ +noVNC_logo = {"width": 640, "height": 435, "data": "data:image/png;base64,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"}; diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/playback.js b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/playback.js new file mode 100644 index 0000000..22a00a3 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/playback.js @@ -0,0 +1,90 @@ +/* + * noVNC: HTML5 VNC client + * Copyright (C) 2011 Joel Martin + * Licensed under LGPL-3 (see LICENSE.LGPL-3) + */ + +"use strict"; +/*jslint browser: true, white: false */ +/*global Util, VNC_frame_data, finish */ + +var rfb, mode, test_state, frame_idx, frame_length, + iteration, iterations, istart_time, + + // Pre-declarations for jslint + send_array, next_iteration, queue_next_packet, do_packet; + +// Override send_array +send_array = function (arr) { + // Stub out send_array +}; + +next_iteration = function () { + if (iteration === 0) { + frame_length = VNC_frame_data.length; + test_state = 'running'; + } else { + rfb.disconnect(); + } + + if (test_state !== 'running') { return; } + + iteration += 1; + if (iteration > iterations) { + finish(); + return; + } + + frame_idx = 0; + istart_time = (new Date()).getTime(); + rfb.connect('test', 0, "bogus"); + + queue_next_packet(); + +}; + +queue_next_packet = function () { + var frame, foffset, toffset, delay; + if (test_state !== 'running') { return; } + + frame = VNC_frame_data[frame_idx]; + while ((frame_idx < frame_length) && (frame.charAt(0) === "}")) { + //Util.Debug("Send frame " + frame_idx); + frame_idx += 1; + frame = VNC_frame_data[frame_idx]; + } + + if (frame === 'EOF') { + Util.Debug("Finished, found EOF"); + next_iteration(); + return; + } + if (frame_idx >= frame_length) { + Util.Debug("Finished, no more frames"); + next_iteration(); + return; + } + + if (mode === 'realtime') { + foffset = frame.slice(1, frame.indexOf('{', 1)); + toffset = (new Date()).getTime() - istart_time; + delay = foffset - toffset; + if (delay < 1) { + delay = 1; + } + + setTimeout(do_packet, delay); + } else { + setTimeout(do_packet, 1); + } +}; + +do_packet = function () { + //Util.Debug("Processing frame: " + frame_idx); + var frame = VNC_frame_data[frame_idx]; + rfb.recv_message({'data' : frame.slice(frame.indexOf('{', 1) + 1)}); + frame_idx += 1; + + queue_next_packet(); +}; + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/rfb.js b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/rfb.js new file mode 100644 index 0000000..75b9797 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/rfb.js @@ -0,0 +1,1847 @@ +/* + * noVNC: HTML5 VNC client + * Copyright (C) 2011 Joel Martin + * Licensed under LGPL-3 (see LICENSE.txt) + * + * See README.md for usage and integration instructions. + * + * TIGHT decoder portion: + * (c) 2012 Michael Tinglof, Joe Balaz, Les Piech (Mercuri.ca) + */ + +/*jslint white: false, browser: true, bitwise: false, plusplus: false */ +/*global window, Util, Display, Keyboard, Mouse, Websock, Websock_native, Base64, DES */ + + +function RFB(defaults) { +"use strict"; + +var that = {}, // Public API methods + conf = {}, // Configuration attributes + + // Pre-declare private functions used before definitions (jslint) + init_vars, updateState, fail, handle_message, + init_msg, normal_msg, framebufferUpdate, print_stats, + + pixelFormat, clientEncodings, fbUpdateRequest, fbUpdateRequests, + keyEvent, pointerEvent, clientCutText, + + getTightCLength, extract_data_uri, scan_tight_imgQ, + keyPress, mouseButton, mouseMove, + + checkEvents, // Overridable for testing + + + // + // Private RFB namespace variables + // + rfb_host = '', + rfb_port = 5900, + rfb_password = '', + rfb_path = '', + + rfb_state = 'disconnected', + rfb_version = 0, + rfb_max_version= 3.8, + rfb_auth_scheme= '', + + + // In preference order + encodings = [ + ['COPYRECT', 0x01 ], + ['TIGHT', 0x07 ], + ['TIGHT_PNG', -260 ], + ['HEXTILE', 0x05 ], + ['RRE', 0x02 ], + ['RAW', 0x00 ], + ['DesktopSize', -223 ], + ['Cursor', -239 ], + + // Psuedo-encoding settings + //['JPEG_quality_lo', -32 ], + ['JPEG_quality_med', -26 ], + //['JPEG_quality_hi', -23 ], + //['compress_lo', -255 ], + ['compress_hi', -247 ], + ['last_rect', -224 ] + ], + + encHandlers = {}, + encNames = {}, + encStats = {}, // [rectCnt, rectCntTot] + + ws = null, // Websock object + display = null, // Display object + keyboard = null, // Keyboard input handler object + mouse = null, // Mouse input handler object + sendTimer = null, // Send Queue check timer + connTimer = null, // connection timer + disconnTimer = null, // disconnection timer + msgTimer = null, // queued handle_message timer + + // Frame buffer update state + FBU = { + rects : 0, + subrects : 0, // RRE + lines : 0, // RAW + tiles : 0, // HEXTILE + bytes : 0, + x : 0, + y : 0, + width : 0, + height : 0, + encoding : 0, + subencoding : -1, + background : null, + imgQ : [], // TIGHT_PNG image queue + zlibs : [] // TIGHT zlib streams + }, + + fb_Bpp = 4, + fb_depth = 3, + fb_width = 0, + fb_height = 0, + fb_name = "", + + scan_imgQ_rate = 40, // 25 times per second or so + last_req_time = 0, + rre_chunk_sz = 100, + + timing = { + last_fbu : 0, + fbu_total : 0, + fbu_total_cnt : 0, + full_fbu_total : 0, + full_fbu_cnt : 0, + + fbu_rt_start : 0, + fbu_rt_total : 0, + fbu_rt_cnt : 0, + pixels : 0 + }, + + test_mode = false, + + def_con_timeout = Websock_native ? 2 : 5, + + /* Mouse state */ + mouse_buttonMask = 0, + mouse_arr = [], + viewportDragging = false, + viewportDragPos = {}; + +// Configuration attributes +Util.conf_defaults(conf, that, defaults, [ + ['target', 'wo', 'dom', null, 'VNC display rendering Canvas object'], + ['focusContainer', 'wo', 'dom', document, 'DOM element that captures keyboard input'], + + ['encrypt', 'rw', 'bool', false, 'Use TLS/SSL/wss encryption'], + ['true_color', 'rw', 'bool', true, 'Request true color pixel data'], + ['local_cursor', 'rw', 'bool', false, 'Request locally rendered cursor'], + ['shared', 'rw', 'bool', true, 'Request shared mode'], + ['view_only', 'rw', 'bool', false, 'Disable client mouse/keyboard'], + + ['connectTimeout', 'rw', 'int', def_con_timeout, 'Time (s) to wait for connection'], + ['disconnectTimeout', 'rw', 'int', 3, 'Time (s) to wait for disconnection'], + + ['viewportDrag', 'rw', 'bool', false, 'Move the viewport on mouse drags'], + + ['check_rate', 'rw', 'int', 217, 'Timing (ms) of send/receive check'], + ['fbu_req_rate', 'rw', 'int', 1413, 'Timing (ms) of frameBufferUpdate requests'], + + // Callback functions + ['onUpdateState', 'rw', 'func', function() { }, + 'onUpdateState(rfb, state, oldstate, statusMsg): RFB state update/change '], + ['onPasswordRequired', 'rw', 'func', function() { }, + 'onPasswordRequired(rfb): VNC password is required '], + ['onClipboard', 'rw', 'func', function() { }, + 'onClipboard(rfb, text): RFB clipboard contents received'], + ['onBell', 'rw', 'func', function() { }, + 'onBell(rfb): RFB Bell message received '], + ['onFBUReceive', 'rw', 'func', function() { }, + 'onFBUReceive(rfb, fbu): RFB FBU received but not yet processed '], + ['onFBUComplete', 'rw', 'func', function() { }, + 'onFBUComplete(rfb, fbu): RFB FBU received and processed '], + + // These callback names are deprecated + ['updateState', 'rw', 'func', function() { }, + 'obsolete, use onUpdateState'], + ['clipboardReceive', 'rw', 'func', function() { }, + 'obsolete, use onClipboard'] + ]); + + +// Override/add some specific configuration getters/setters +that.set_local_cursor = function(cursor) { + if ((!cursor) || (cursor in {'0':1, 'no':1, 'false':1})) { + conf.local_cursor = false; + } else { + if (display.get_cursor_uri()) { + conf.local_cursor = true; + } else { + Util.Warn("Browser does not support local cursor"); + } + } +}; + +// These are fake configuration getters +that.get_display = function() { return display; }; + +that.get_keyboard = function() { return keyboard; }; + +that.get_mouse = function() { return mouse; }; + + + +// +// Setup routines +// + +// Create the public API interface and initialize values that stay +// constant across connect/disconnect +function constructor() { + var i, rmode; + Util.Debug(">> RFB.constructor"); + + // Create lookup tables based encoding number + for (i=0; i < encodings.length; i+=1) { + encHandlers[encodings[i][1]] = encHandlers[encodings[i][0]]; + encNames[encodings[i][1]] = encodings[i][0]; + encStats[encodings[i][1]] = [0, 0]; + } + // Initialize display, mouse, keyboard, and websock + try { + display = new Display({'target': conf.target}); + } catch (exc) { + Util.Error("Display exception: " + exc); + updateState('fatal', "No working Display"); + } + keyboard = new Keyboard({'target': conf.focusContainer, + 'onKeyPress': keyPress}); + mouse = new Mouse({'target': conf.target, + 'onMouseButton': mouseButton, + 'onMouseMove': mouseMove}); + + rmode = display.get_render_mode(); + + ws = new Websock(); + ws.on('message', handle_message); + ws.on('open', function() { + if (rfb_state === "connect") { + updateState('ProtocolVersion', "Starting VNC handshake"); + } else { + fail("Got unexpected WebSockets connection"); + } + }); + ws.on('close', function(e) { + if (e.code) { + Util.Info("Close code: " + e.code + ", reason: " + e.reason + ", wasClean: " + e.wasClean); + } + if (rfb_state === 'disconnect') { + updateState('disconnected', 'VNC disconnected'); + } else if (rfb_state === 'ProtocolVersion') { + fail('Failed to connect to server'); + } else if (rfb_state in {'failed':1, 'disconnected':1}) { + Util.Error("Received onclose while disconnected"); + } else { + fail('Server disconnected'); + } + }); + ws.on('error', function(e) { + fail("WebSock error: " + e); + }); + + + init_vars(); + + /* Check web-socket-js if no builtin WebSocket support */ + if (Websock_native) { + Util.Info("Using native WebSockets"); + updateState('loaded', 'noVNC ready: native WebSockets, ' + rmode); + } else { + Util.Warn("Using web-socket-js bridge. Flash version: " + + Util.Flash.version); + if ((! Util.Flash) || + (Util.Flash.version < 9)) { + updateState('fatal', "WebSockets or Adobe Flash<\/a> is required"); + } else if (document.location.href.substr(0, 7) === "file://") { + updateState('fatal', + "'file://' URL is incompatible with Adobe Flash"); + } else { + updateState('loaded', 'noVNC ready: WebSockets emulation, ' + rmode); + } + } + + Util.Debug("<< RFB.constructor"); + return that; // Return the public API interface +} + +function connect() { + Util.Debug(">> RFB.connect"); + var uri; + + if (typeof UsingSocketIO !== "undefined") { + uri = "http://" + rfb_host + ":" + rfb_port + "/" + rfb_path; + } else { + if (conf.encrypt) { + uri = "wss://"; + } else { + uri = "ws://"; + } + uri += rfb_host + ":" + rfb_port + "/" + rfb_path; + } + Util.Info("connecting to " + uri); + ws.open(uri); + + Util.Debug("<< RFB.connect"); +} + +// Initialize variables that are reset before each connection +init_vars = function() { + var i; + + /* Reset state */ + ws.init(); + + FBU.rects = 0; + FBU.subrects = 0; // RRE and HEXTILE + FBU.lines = 0; // RAW + FBU.tiles = 0; // HEXTILE + FBU.imgQ = []; // TIGHT_PNG image queue + FBU.zlibs = []; // TIGHT zlib encoders + mouse_buttonMask = 0; + mouse_arr = []; + + // Clear the per connection encoding stats + for (i=0; i < encodings.length; i+=1) { + encStats[encodings[i][1]][0] = 0; + } + + for (i=0; i < 4; i++) { + //FBU.zlibs[i] = new InflateStream(); + FBU.zlibs[i] = new TINF(); + FBU.zlibs[i].init(); + } +}; + +// Print statistics +print_stats = function() { + var i, s; + Util.Info("Encoding stats for this connection:"); + for (i=0; i < encodings.length; i+=1) { + s = encStats[encodings[i][1]]; + if ((s[0] + s[1]) > 0) { + Util.Info(" " + encodings[i][0] + ": " + + s[0] + " rects"); + } + } + Util.Info("Encoding stats since page load:"); + for (i=0; i < encodings.length; i+=1) { + s = encStats[encodings[i][1]]; + if ((s[0] + s[1]) > 0) { + Util.Info(" " + encodings[i][0] + ": " + + s[1] + " rects"); + } + } +}; + +// +// Utility routines +// + + +/* + * Page states: + * loaded - page load, equivalent to disconnected + * disconnected - idle state + * connect - starting to connect (to ProtocolVersion) + * normal - connected + * disconnect - starting to disconnect + * failed - abnormal disconnect + * fatal - failed to load page, or fatal error + * + * RFB protocol initialization states: + * ProtocolVersion + * Security + * Authentication + * password - waiting for password, not part of RFB + * SecurityResult + * ClientInitialization - not triggered by server message + * ServerInitialization (to normal) + */ +updateState = function(state, statusMsg) { + var func, cmsg, oldstate = rfb_state; + + if (state === oldstate) { + /* Already here, ignore */ + Util.Debug("Already in state '" + state + "', ignoring."); + return; + } + + /* + * These are disconnected states. A previous connect may + * asynchronously cause a connection so make sure we are closed. + */ + if (state in {'disconnected':1, 'loaded':1, 'connect':1, + 'disconnect':1, 'failed':1, 'fatal':1}) { + if (sendTimer) { + clearInterval(sendTimer); + sendTimer = null; + } + + if (msgTimer) { + clearInterval(msgTimer); + msgTimer = null; + } + + if (display && display.get_context()) { + keyboard.ungrab(); + mouse.ungrab(); + display.defaultCursor(); + if ((Util.get_logging() !== 'debug') || + (state === 'loaded')) { + // Show noVNC logo on load and when disconnected if + // debug is off + display.clear(); + } + } + + ws.close(); + } + + if (oldstate === 'fatal') { + Util.Error("Fatal error, cannot continue"); + } + + if ((state === 'failed') || (state === 'fatal')) { + func = Util.Error; + } else { + func = Util.Warn; + } + + if ((oldstate === 'failed') && (state === 'disconnected')) { + // Do disconnect action, but stay in failed state. + rfb_state = 'failed'; + } else { + rfb_state = state; + } + + cmsg = typeof(statusMsg) !== 'undefined' ? (" Msg: " + statusMsg) : ""; + func("New state '" + rfb_state + "', was '" + oldstate + "'." + cmsg); + + if (connTimer && (rfb_state !== 'connect')) { + Util.Debug("Clearing connect timer"); + clearInterval(connTimer); + connTimer = null; + } + + if (disconnTimer && (rfb_state !== 'disconnect')) { + Util.Debug("Clearing disconnect timer"); + clearInterval(disconnTimer); + disconnTimer = null; + } + + switch (state) { + case 'normal': + if ((oldstate === 'disconnected') || (oldstate === 'failed')) { + Util.Error("Invalid transition from 'disconnected' or 'failed' to 'normal'"); + } + + break; + + + case 'connect': + + connTimer = setTimeout(function () { + fail("Connect timeout"); + }, conf.connectTimeout * 1000); + + init_vars(); + connect(); + + // WebSocket.onopen transitions to 'ProtocolVersion' + break; + + + case 'disconnect': + + if (! test_mode) { + disconnTimer = setTimeout(function () { + fail("Disconnect timeout"); + }, conf.disconnectTimeout * 1000); + } + + print_stats(); + + // WebSocket.onclose transitions to 'disconnected' + break; + + + case 'failed': + if (oldstate === 'disconnected') { + Util.Error("Invalid transition from 'disconnected' to 'failed'"); + } + if (oldstate === 'normal') { + Util.Error("Error while connected."); + } + if (oldstate === 'init') { + Util.Error("Error while initializing."); + } + + // Make sure we transition to disconnected + setTimeout(function() { updateState('disconnected'); }, 50); + + break; + + + default: + // No state change action to take + + } + + if ((oldstate === 'failed') && (state === 'disconnected')) { + // Leave the failed message + conf.updateState(that, state, oldstate); // Obsolete + conf.onUpdateState(that, state, oldstate); + } else { + conf.updateState(that, state, oldstate, statusMsg); // Obsolete + conf.onUpdateState(that, state, oldstate, statusMsg); + } +}; + +fail = function(msg) { + updateState('failed', msg); + return false; +}; + +handle_message = function() { + //Util.Debug(">> handle_message ws.rQlen(): " + ws.rQlen()); + //Util.Debug("ws.rQslice(0,20): " + ws.rQslice(0,20) + " (" + ws.rQlen() + ")"); + if (ws.rQlen() === 0) { + Util.Warn("handle_message called on empty receive queue"); + return; + } + switch (rfb_state) { + case 'disconnected': + case 'failed': + Util.Error("Got data while disconnected"); + break; + case 'normal': + if (normal_msg() && ws.rQlen() > 0) { + // true means we can continue processing + // Give other events a chance to run + if (msgTimer === null) { + Util.Debug("More data to process, creating timer"); + msgTimer = setTimeout(function () { + msgTimer = null; + handle_message(); + }, 10); + } else { + Util.Debug("More data to process, existing timer"); + } + } + break; + default: + init_msg(); + break; + } +}; + + +function genDES(password, challenge) { + var i, passwd = []; + for (i=0; i < password.length; i += 1) { + passwd.push(password.charCodeAt(i)); + } + return (new DES(passwd)).encrypt(challenge); +} + +function flushClient() { + if (mouse_arr.length > 0) { + //send(mouse_arr.concat(fbUpdateRequests())); + ws.send(mouse_arr); + setTimeout(function() { + ws.send(fbUpdateRequests()); + }, 50); + + mouse_arr = []; + return true; + } else { + return false; + } +} + +// overridable for testing +checkEvents = function() { + var now; + if (rfb_state === 'normal' && !viewportDragging) { + if (! flushClient()) { + now = new Date().getTime(); + if (now > last_req_time + conf.fbu_req_rate) { + last_req_time = now; + ws.send(fbUpdateRequests()); + } + } + } + setTimeout(checkEvents, conf.check_rate); +}; + +keyPress = function(keysym, down) { + var arr; + + if (conf.view_only) { return; } // View only, skip keyboard events + + arr = keyEvent(keysym, down); + arr = arr.concat(fbUpdateRequests()); + ws.send(arr); +}; + +mouseButton = function(x, y, down, bmask) { + if (down) { + mouse_buttonMask |= bmask; + } else { + mouse_buttonMask ^= bmask; + } + + if (conf.viewportDrag) { + if (down && !viewportDragging) { + viewportDragging = true; + viewportDragPos = {'x': x, 'y': y}; + + // Skip sending mouse events + return; + } else { + viewportDragging = false; + ws.send(fbUpdateRequests()); // Force immediate redraw + } + } + + if (conf.view_only) { return; } // View only, skip mouse events + + mouse_arr = mouse_arr.concat( + pointerEvent(display.absX(x), display.absY(y)) ); + flushClient(); +}; + +mouseMove = function(x, y) { + //Util.Debug('>> mouseMove ' + x + "," + y); + var deltaX, deltaY; + + if (viewportDragging) { + //deltaX = x - viewportDragPos.x; // drag viewport + deltaX = viewportDragPos.x - x; // drag frame buffer + //deltaY = y - viewportDragPos.y; // drag viewport + deltaY = viewportDragPos.y - y; // drag frame buffer + viewportDragPos = {'x': x, 'y': y}; + + display.viewportChange(deltaX, deltaY); + + // Skip sending mouse events + return; + } + + if (conf.view_only) { return; } // View only, skip mouse events + + mouse_arr = mouse_arr.concat( + pointerEvent(display.absX(x), display.absY(y)) ); +}; + + +// +// Server message handlers +// + +// RFB/VNC initialisation message handler +init_msg = function() { + //Util.Debug(">> init_msg [rfb_state '" + rfb_state + "']"); + + var strlen, reason, length, sversion, cversion, + i, types, num_types, challenge, response, bpp, depth, + big_endian, red_max, green_max, blue_max, red_shift, + green_shift, blue_shift, true_color, name_length; + + //Util.Debug("ws.rQ (" + ws.rQlen() + ") " + ws.rQslice(0)); + switch (rfb_state) { + + case 'ProtocolVersion' : + if (ws.rQlen() < 12) { + return fail("Incomplete protocol version"); + } + sversion = ws.rQshiftStr(12).substr(4,7); + Util.Info("Server ProtocolVersion: " + sversion); + switch (sversion) { + case "003.003": rfb_version = 3.3; break; + case "003.006": rfb_version = 3.3; break; // UltraVNC + case "003.889": rfb_version = 3.3; break; // Apple Remote Desktop + case "003.007": rfb_version = 3.7; break; + case "003.008": rfb_version = 3.8; break; + case "004.000": rfb_version = 3.8; break; // Intel AMT KVM + default: + return fail("Invalid server version " + sversion); + } + if (rfb_version > rfb_max_version) { + rfb_version = rfb_max_version; + } + + if (! test_mode) { + sendTimer = setInterval(function() { + // Send updates either at a rate of one update + // every 50ms, or whatever slower rate the network + // can handle. + ws.flush(); + }, 50); + } + + cversion = "00" + parseInt(rfb_version,10) + + ".00" + ((rfb_version * 10) % 10); + ws.send_string("RFB " + cversion + "\n"); + updateState('Security', "Sent ProtocolVersion: " + cversion); + break; + + case 'Security' : + if (rfb_version >= 3.7) { + // Server sends supported list, client decides + num_types = ws.rQshift8(); + if (ws.rQwait("security type", num_types, 1)) { return false; } + if (num_types === 0) { + strlen = ws.rQshift32(); + reason = ws.rQshiftStr(strlen); + return fail("Security failure: " + reason); + } + rfb_auth_scheme = 0; + types = ws.rQshiftBytes(num_types); + Util.Debug("Server security types: " + types); + for (i=0; i < types.length; i+=1) { + if ((types[i] > rfb_auth_scheme) && (types[i] < 3)) { + rfb_auth_scheme = types[i]; + } + } + if (rfb_auth_scheme === 0) { + return fail("Unsupported security types: " + types); + } + + ws.send([rfb_auth_scheme]); + } else { + // Server decides + if (ws.rQwait("security scheme", 4)) { return false; } + rfb_auth_scheme = ws.rQshift32(); + } + updateState('Authentication', + "Authenticating using scheme: " + rfb_auth_scheme); + init_msg(); // Recursive fallthrough (workaround JSLint complaint) + break; + + // Triggered by fallthough, not by server message + case 'Authentication' : + //Util.Debug("Security auth scheme: " + rfb_auth_scheme); + switch (rfb_auth_scheme) { + case 0: // connection failed + if (ws.rQwait("auth reason", 4)) { return false; } + strlen = ws.rQshift32(); + reason = ws.rQshiftStr(strlen); + return fail("Auth failure: " + reason); + case 1: // no authentication + if (rfb_version >= 3.8) { + updateState('SecurityResult'); + return; + } + // Fall through to ClientInitialisation + break; + case 2: // VNC authentication + if (rfb_password.length === 0) { + // Notify via both callbacks since it is kind of + // a RFB state change and a UI interface issue. + updateState('password', "Password Required"); + conf.onPasswordRequired(that); + return; + } + if (ws.rQwait("auth challenge", 16)) { return false; } + challenge = ws.rQshiftBytes(16); + //Util.Debug("Password: " + rfb_password); + //Util.Debug("Challenge: " + challenge + + // " (" + challenge.length + ")"); + response = genDES(rfb_password, challenge); + //Util.Debug("Response: " + response + + // " (" + response.length + ")"); + + //Util.Debug("Sending DES encrypted auth response"); + ws.send(response); + updateState('SecurityResult'); + return; + default: + fail("Unsupported auth scheme: " + rfb_auth_scheme); + return; + } + updateState('ClientInitialisation', "No auth required"); + init_msg(); // Recursive fallthrough (workaround JSLint complaint) + break; + + case 'SecurityResult' : + if (ws.rQwait("VNC auth response ", 4)) { return false; } + switch (ws.rQshift32()) { + case 0: // OK + // Fall through to ClientInitialisation + break; + case 1: // failed + if (rfb_version >= 3.8) { + length = ws.rQshift32(); + if (ws.rQwait("SecurityResult reason", length, 8)) { + return false; + } + reason = ws.rQshiftStr(length); + fail(reason); + } else { + fail("Authentication failed"); + } + return; + case 2: // too-many + return fail("Too many auth attempts"); + } + updateState('ClientInitialisation', "Authentication OK"); + init_msg(); // Recursive fallthrough (workaround JSLint complaint) + break; + + // Triggered by fallthough, not by server message + case 'ClientInitialisation' : + ws.send([conf.shared ? 1 : 0]); // ClientInitialisation + updateState('ServerInitialisation', "Authentication OK"); + break; + + case 'ServerInitialisation' : + if (ws.rQwait("server initialization", 24)) { return false; } + + /* Screen size */ + fb_width = ws.rQshift16(); + fb_height = ws.rQshift16(); + + /* PIXEL_FORMAT */ + bpp = ws.rQshift8(); + depth = ws.rQshift8(); + big_endian = ws.rQshift8(); + true_color = ws.rQshift8(); + + red_max = ws.rQshift16(); + green_max = ws.rQshift16(); + blue_max = ws.rQshift16(); + red_shift = ws.rQshift8(); + green_shift = ws.rQshift8(); + blue_shift = ws.rQshift8(); + ws.rQshiftStr(3); // padding + + Util.Info("Screen: " + fb_width + "x" + fb_height + + ", bpp: " + bpp + ", depth: " + depth + + ", big_endian: " + big_endian + + ", true_color: " + true_color + + ", red_max: " + red_max + + ", green_max: " + green_max + + ", blue_max: " + blue_max + + ", red_shift: " + red_shift + + ", green_shift: " + green_shift + + ", blue_shift: " + blue_shift); + + if (big_endian !== 0) { + Util.Warn("Server native endian is not little endian"); + } + if (red_shift !== 16) { + Util.Warn("Server native red-shift is not 16"); + } + if (blue_shift !== 0) { + Util.Warn("Server native blue-shift is not 0"); + } + + /* Connection name/title */ + name_length = ws.rQshift32(); + fb_name = ws.rQshiftStr(name_length); + + if (conf.true_color && fb_name === "Intel(r) AMT KVM") + { + Util.Warn("Intel AMT KVM only support 8/16 bit depths. Disabling true color"); + conf.true_color = false; + } + + display.set_true_color(conf.true_color); + display.resize(fb_width, fb_height); + keyboard.grab(); + mouse.grab(); + + if (conf.true_color) { + fb_Bpp = 4; + fb_depth = 3; + } else { + fb_Bpp = 1; + fb_depth = 1; + } + + response = pixelFormat(); + response = response.concat(clientEncodings()); + response = response.concat(fbUpdateRequests()); + timing.fbu_rt_start = (new Date()).getTime(); + ws.send(response); + + /* Start pushing/polling */ + setTimeout(checkEvents, conf.check_rate); + setTimeout(scan_tight_imgQ, scan_imgQ_rate); + + if (conf.encrypt) { + updateState('normal', "Connected (encrypted) to: " + fb_name); + } else { + updateState('normal', "Connected (unencrypted) to: " + fb_name); + } + break; + } + //Util.Debug("<< init_msg"); +}; + + +/* Normal RFB/VNC server message handler */ +normal_msg = function() { + //Util.Debug(">> normal_msg"); + + var ret = true, msg_type, length, text, + c, first_colour, num_colours, red, green, blue; + + if (FBU.rects > 0) { + msg_type = 0; + } else { + msg_type = ws.rQshift8(); + } + switch (msg_type) { + case 0: // FramebufferUpdate + ret = framebufferUpdate(); // false means need more data + break; + case 1: // SetColourMapEntries + Util.Debug("SetColourMapEntries"); + ws.rQshift8(); // Padding + first_colour = ws.rQshift16(); // First colour + num_colours = ws.rQshift16(); + if (ws.rQwait("SetColourMapEntries", num_colours*6, 6)) { return false; } + + for (c=0; c < num_colours; c+=1) { + red = ws.rQshift16(); + //Util.Debug("red before: " + red); + red = parseInt(red / 256, 10); + //Util.Debug("red after: " + red); + green = parseInt(ws.rQshift16() / 256, 10); + blue = parseInt(ws.rQshift16() / 256, 10); + display.set_colourMap([blue, green, red], first_colour + c); + } + Util.Debug("colourMap: " + display.get_colourMap()); + Util.Info("Registered " + num_colours + " colourMap entries"); + //Util.Debug("colourMap: " + display.get_colourMap()); + break; + case 2: // Bell + Util.Debug("Bell"); + conf.onBell(that); + break; + case 3: // ServerCutText + Util.Debug("ServerCutText"); + if (ws.rQwait("ServerCutText header", 7, 1)) { return false; } + ws.rQshiftBytes(3); // Padding + length = ws.rQshift32(); + if (ws.rQwait("ServerCutText", length, 8)) { return false; } + + text = ws.rQshiftStr(length); + conf.clipboardReceive(that, text); // Obsolete + conf.onClipboard(that, text); + break; + default: + fail("Disconnected: illegal server message type " + msg_type); + Util.Debug("ws.rQslice(0,30):" + ws.rQslice(0,30)); + break; + } + //Util.Debug("<< normal_msg"); + return ret; +}; + +framebufferUpdate = function() { + var now, hdr, fbu_rt_diff, ret = true; + + if (FBU.rects === 0) { + //Util.Debug("New FBU: ws.rQslice(0,20): " + ws.rQslice(0,20)); + if (ws.rQwait("FBU header", 3)) { + ws.rQunshift8(0); // FBU msg_type + return false; + } + ws.rQshift8(); // padding + FBU.rects = ws.rQshift16(); + //Util.Debug("FramebufferUpdate, rects:" + FBU.rects); + FBU.bytes = 0; + timing.cur_fbu = 0; + if (timing.fbu_rt_start > 0) { + now = (new Date()).getTime(); + Util.Info("First FBU latency: " + (now - timing.fbu_rt_start)); + } + } + + while (FBU.rects > 0) { + if (rfb_state !== "normal") { + return false; + } + if (ws.rQwait("FBU", FBU.bytes)) { return false; } + if (FBU.bytes === 0) { + if (ws.rQwait("rect header", 12)) { return false; } + /* New FramebufferUpdate */ + + hdr = ws.rQshiftBytes(12); + FBU.x = (hdr[0] << 8) + hdr[1]; + FBU.y = (hdr[2] << 8) + hdr[3]; + FBU.width = (hdr[4] << 8) + hdr[5]; + FBU.height = (hdr[6] << 8) + hdr[7]; + FBU.encoding = parseInt((hdr[8] << 24) + (hdr[9] << 16) + + (hdr[10] << 8) + hdr[11], 10); + + conf.onFBUReceive(that, + {'x': FBU.x, 'y': FBU.y, + 'width': FBU.width, 'height': FBU.height, + 'encoding': FBU.encoding, + 'encodingName': encNames[FBU.encoding]}); + + if (encNames[FBU.encoding]) { + // Debug: + /* + var msg = "FramebufferUpdate rects:" + FBU.rects; + msg += " x: " + FBU.x + " y: " + FBU.y; + msg += " width: " + FBU.width + " height: " + FBU.height; + msg += " encoding:" + FBU.encoding; + msg += "(" + encNames[FBU.encoding] + ")"; + msg += ", ws.rQlen(): " + ws.rQlen(); + Util.Debug(msg); + */ + } else { + fail("Disconnected: unsupported encoding " + + FBU.encoding); + return false; + } + } + + timing.last_fbu = (new Date()).getTime(); + + ret = encHandlers[FBU.encoding](); + + now = (new Date()).getTime(); + timing.cur_fbu += (now - timing.last_fbu); + + if (ret) { + encStats[FBU.encoding][0] += 1; + encStats[FBU.encoding][1] += 1; + timing.pixels += FBU.width * FBU.height; + } + + if (FBU.rects === 0 || (timing.pixels >= (fb_width * fb_height))) { + if (((FBU.width === fb_width) && + (FBU.height === fb_height)) || + (timing.fbu_rt_start > 0)) { + timing.full_fbu_total += timing.cur_fbu; + timing.full_fbu_cnt += 1; + Util.Info("Timing of full FBU, cur: " + + timing.cur_fbu + ", total: " + + timing.full_fbu_total + ", cnt: " + + timing.full_fbu_cnt + ", avg: " + + (timing.full_fbu_total / + timing.full_fbu_cnt)); + } + if (timing.fbu_rt_start > 0) { + fbu_rt_diff = now - timing.fbu_rt_start; + timing.fbu_rt_total += fbu_rt_diff; + timing.fbu_rt_cnt += 1; + Util.Info("full FBU round-trip, cur: " + + fbu_rt_diff + ", total: " + + timing.fbu_rt_total + ", cnt: " + + timing.fbu_rt_cnt + ", avg: " + + (timing.fbu_rt_total / + timing.fbu_rt_cnt)); + timing.fbu_rt_start = 0; + } + } + if (! ret) { + return ret; // false ret means need more data + } + } + + conf.onFBUComplete(that, + {'x': FBU.x, 'y': FBU.y, + 'width': FBU.width, 'height': FBU.height, + 'encoding': FBU.encoding, + 'encodingName': encNames[FBU.encoding]}); + + return true; // We finished this FBU +}; + +// +// FramebufferUpdate encodings +// + +encHandlers.RAW = function display_raw() { + //Util.Debug(">> display_raw (" + ws.rQlen() + " bytes)"); + + var cur_y, cur_height; + + if (FBU.lines === 0) { + FBU.lines = FBU.height; + } + FBU.bytes = FBU.width * fb_Bpp; // At least a line + if (ws.rQwait("RAW", FBU.bytes)) { return false; } + cur_y = FBU.y + (FBU.height - FBU.lines); + cur_height = Math.min(FBU.lines, + Math.floor(ws.rQlen()/(FBU.width * fb_Bpp))); + display.blitImage(FBU.x, cur_y, FBU.width, cur_height, + ws.get_rQ(), ws.get_rQi()); + ws.rQshiftBytes(FBU.width * cur_height * fb_Bpp); + FBU.lines -= cur_height; + + if (FBU.lines > 0) { + FBU.bytes = FBU.width * fb_Bpp; // At least another line + } else { + FBU.rects -= 1; + FBU.bytes = 0; + } + //Util.Debug("<< display_raw (" + ws.rQlen() + " bytes)"); + return true; +}; + +encHandlers.COPYRECT = function display_copy_rect() { + //Util.Debug(">> display_copy_rect"); + + var old_x, old_y; + + if (ws.rQwait("COPYRECT", 4)) { return false; } + old_x = ws.rQshift16(); + old_y = ws.rQshift16(); + display.copyImage(old_x, old_y, FBU.x, FBU.y, FBU.width, FBU.height); + FBU.rects -= 1; + FBU.bytes = 0; + return true; +}; + +encHandlers.RRE = function display_rre() { + //Util.Debug(">> display_rre (" + ws.rQlen() + " bytes)"); + var color, x, y, width, height, chunk; + + if (FBU.subrects === 0) { + if (ws.rQwait("RRE", 4+fb_Bpp)) { return false; } + FBU.subrects = ws.rQshift32(); + color = ws.rQshiftBytes(fb_Bpp); // Background + display.fillRect(FBU.x, FBU.y, FBU.width, FBU.height, color); + } + while ((FBU.subrects > 0) && (ws.rQlen() >= (fb_Bpp + 8))) { + color = ws.rQshiftBytes(fb_Bpp); + x = ws.rQshift16(); + y = ws.rQshift16(); + width = ws.rQshift16(); + height = ws.rQshift16(); + display.fillRect(FBU.x + x, FBU.y + y, width, height, color); + FBU.subrects -= 1; + } + //Util.Debug(" display_rre: rects: " + FBU.rects + + // ", FBU.subrects: " + FBU.subrects); + + if (FBU.subrects > 0) { + chunk = Math.min(rre_chunk_sz, FBU.subrects); + FBU.bytes = (fb_Bpp + 8) * chunk; + } else { + FBU.rects -= 1; + FBU.bytes = 0; + } + //Util.Debug("<< display_rre, FBU.bytes: " + FBU.bytes); + return true; +}; + +encHandlers.HEXTILE = function display_hextile() { + //Util.Debug(">> display_hextile"); + var subencoding, subrects, color, cur_tile, + tile_x, x, w, tile_y, y, h, xy, s, sx, sy, wh, sw, sh, + rQ = ws.get_rQ(), rQi = ws.get_rQi(); + + if (FBU.tiles === 0) { + FBU.tiles_x = Math.ceil(FBU.width/16); + FBU.tiles_y = Math.ceil(FBU.height/16); + FBU.total_tiles = FBU.tiles_x * FBU.tiles_y; + FBU.tiles = FBU.total_tiles; + } + + /* FBU.bytes comes in as 1, ws.rQlen() at least 1 */ + while (FBU.tiles > 0) { + FBU.bytes = 1; + if (ws.rQwait("HEXTILE subencoding", FBU.bytes)) { return false; } + subencoding = rQ[rQi]; // Peek + if (subencoding > 30) { // Raw + fail("Disconnected: illegal hextile subencoding " + subencoding); + //Util.Debug("ws.rQslice(0,30):" + ws.rQslice(0,30)); + return false; + } + subrects = 0; + cur_tile = FBU.total_tiles - FBU.tiles; + tile_x = cur_tile % FBU.tiles_x; + tile_y = Math.floor(cur_tile / FBU.tiles_x); + x = FBU.x + tile_x * 16; + y = FBU.y + tile_y * 16; + w = Math.min(16, (FBU.x + FBU.width) - x); + h = Math.min(16, (FBU.y + FBU.height) - y); + + /* Figure out how much we are expecting */ + if (subencoding & 0x01) { // Raw + //Util.Debug(" Raw subencoding"); + FBU.bytes += w * h * fb_Bpp; + } else { + if (subencoding & 0x02) { // Background + FBU.bytes += fb_Bpp; + } + if (subencoding & 0x04) { // Foreground + FBU.bytes += fb_Bpp; + } + if (subencoding & 0x08) { // AnySubrects + FBU.bytes += 1; // Since we aren't shifting it off + if (ws.rQwait("hextile subrects header", FBU.bytes)) { return false; } + subrects = rQ[rQi + FBU.bytes-1]; // Peek + if (subencoding & 0x10) { // SubrectsColoured + FBU.bytes += subrects * (fb_Bpp + 2); + } else { + FBU.bytes += subrects * 2; + } + } + } + + /* + Util.Debug(" tile:" + cur_tile + "/" + (FBU.total_tiles - 1) + + " (" + tile_x + "," + tile_y + ")" + + " [" + x + "," + y + "]@" + w + "x" + h + + ", subenc:" + subencoding + + "(last: " + FBU.lastsubencoding + "), subrects:" + + subrects + + ", ws.rQlen():" + ws.rQlen() + ", FBU.bytes:" + FBU.bytes + + " last:" + ws.rQslice(FBU.bytes-10, FBU.bytes) + + " next:" + ws.rQslice(FBU.bytes-1, FBU.bytes+10)); + */ + if (ws.rQwait("hextile", FBU.bytes)) { return false; } + + /* We know the encoding and have a whole tile */ + FBU.subencoding = rQ[rQi]; + rQi += 1; + if (FBU.subencoding === 0) { + if (FBU.lastsubencoding & 0x01) { + /* Weird: ignore blanks after RAW */ + Util.Debug(" Ignoring blank after RAW"); + } else { + display.fillRect(x, y, w, h, FBU.background); + } + } else if (FBU.subencoding & 0x01) { // Raw + display.blitImage(x, y, w, h, rQ, rQi); + rQi += FBU.bytes - 1; + } else { + if (FBU.subencoding & 0x02) { // Background + FBU.background = rQ.slice(rQi, rQi + fb_Bpp); + rQi += fb_Bpp; + } + if (FBU.subencoding & 0x04) { // Foreground + FBU.foreground = rQ.slice(rQi, rQi + fb_Bpp); + rQi += fb_Bpp; + } + + display.startTile(x, y, w, h, FBU.background); + if (FBU.subencoding & 0x08) { // AnySubrects + subrects = rQ[rQi]; + rQi += 1; + for (s = 0; s < subrects; s += 1) { + if (FBU.subencoding & 0x10) { // SubrectsColoured + color = rQ.slice(rQi, rQi + fb_Bpp); + rQi += fb_Bpp; + } else { + color = FBU.foreground; + } + xy = rQ[rQi]; + rQi += 1; + sx = (xy >> 4); + sy = (xy & 0x0f); + + wh = rQ[rQi]; + rQi += 1; + sw = (wh >> 4) + 1; + sh = (wh & 0x0f) + 1; + + display.subTile(sx, sy, sw, sh, color); + } + } + display.finishTile(); + } + ws.set_rQi(rQi); + FBU.lastsubencoding = FBU.subencoding; + FBU.bytes = 0; + FBU.tiles -= 1; + } + + if (FBU.tiles === 0) { + FBU.rects -= 1; + } + + //Util.Debug("<< display_hextile"); + return true; +}; + + +// Get 'compact length' header and data size +getTightCLength = function (arr) { + var header = 1, data = 0; + data += arr[0] & 0x7f; + if (arr[0] & 0x80) { + header += 1; + data += (arr[1] & 0x7f) << 7; + if (arr[1] & 0x80) { + header += 1; + data += arr[2] << 14; + } + } + return [header, data]; +}; + +function display_tight(isTightPNG) { + //Util.Debug(">> display_tight"); + + if (fb_depth === 1) { + fail("Tight protocol handler only implements true color mode"); + } + + var ctl, cmode, clength, color, img, data; + var filterId = -1, resetStreams = 0, streamId = -1; + var rQ = ws.get_rQ(), rQi = ws.get_rQi(); + + FBU.bytes = 1; // compression-control byte + if (ws.rQwait("TIGHT compression-control", FBU.bytes)) { return false; } + + var checksum = function(data) { + var sum=0, i; + for (i=0; i 65536) sum -= 65536; + } + return sum; + } + + var decompress = function(data) { + for (var i=0; i<4; i++) { + if ((resetStreams >> i) & 1) { + FBU.zlibs[i].reset(); + Util.Info("Reset zlib stream " + i); + } + } + var uncompressed = FBU.zlibs[streamId].uncompress(data, 0); + if (uncompressed.status !== 0) { + Util.Error("Invalid data in zlib stream"); + } + //Util.Warn("Decompressed " + data.length + " to " + + // uncompressed.data.length + " checksums " + + // checksum(data) + ":" + checksum(uncompressed.data)); + + return uncompressed.data; + } + + var handlePalette = function() { + var numColors = rQ[rQi + 2] + 1; + var paletteSize = numColors * fb_depth; + FBU.bytes += paletteSize; + if (ws.rQwait("TIGHT palette " + cmode, FBU.bytes)) { return false; } + + var bpp = (numColors <= 2) ? 1 : 8; + var rowSize = Math.floor((FBU.width * bpp + 7) / 8); + var raw = false; + if (rowSize * FBU.height < 12) { + raw = true; + clength = [0, rowSize * FBU.height]; + } else { + clength = getTightCLength(ws.rQslice(3 + paletteSize, + 3 + paletteSize + 3)); + } + FBU.bytes += clength[0] + clength[1]; + if (ws.rQwait("TIGHT " + cmode, FBU.bytes)) { return false; } + + // Shift ctl, filter id, num colors, palette entries, and clength off + ws.rQshiftBytes(3); + var palette = ws.rQshiftBytes(paletteSize); + ws.rQshiftBytes(clength[0]); + + if (raw) { + data = ws.rQshiftBytes(clength[1]); + } else { + data = decompress(ws.rQshiftBytes(clength[1])); + } + + // Convert indexed (palette based) image data to RGB + // TODO: reduce number of calculations inside loop + var dest = []; + var x, y, b, w, w1, dp, sp; + if (numColors === 2) { + w = Math.floor((FBU.width + 7) / 8); + w1 = Math.floor(FBU.width / 8); + for (y = 0; y < FBU.height; y++) { + for (x = 0; x < w1; x++) { + for (b = 7; b >= 0; b--) { + dp = (y*FBU.width + x*8 + 7-b) * 3; + sp = (data[y*w + x] >> b & 1) * 3; + dest[dp ] = palette[sp ]; + dest[dp+1] = palette[sp+1]; + dest[dp+2] = palette[sp+2]; + } + } + for (b = 7; b >= 8 - FBU.width % 8; b--) { + dp = (y*FBU.width + x*8 + 7-b) * 3; + sp = (data[y*w + x] >> b & 1) * 3; + dest[dp ] = palette[sp ]; + dest[dp+1] = palette[sp+1]; + dest[dp+2] = palette[sp+2]; + } + } + } else { + for (y = 0; y < FBU.height; y++) { + for (x = 0; x < FBU.width; x++) { + dp = (y*FBU.width + x) * 3; + sp = data[y*FBU.width + x] * 3; + dest[dp ] = palette[sp ]; + dest[dp+1] = palette[sp+1]; + dest[dp+2] = palette[sp+2]; + } + } + } + + FBU.imgQ.push({ + 'type': 'rgb', + 'img': {'complete': true, 'data': dest}, + 'x': FBU.x, + 'y': FBU.y, + 'width': FBU.width, + 'height': FBU.height}); + return true; + } + + var handleCopy = function() { + var raw = false; + var uncompressedSize = FBU.width * FBU.height * fb_depth; + if (uncompressedSize < 12) { + raw = true; + clength = [0, uncompressedSize]; + } else { + clength = getTightCLength(ws.rQslice(1, 4)); + } + FBU.bytes = 1 + clength[0] + clength[1]; + if (ws.rQwait("TIGHT " + cmode, FBU.bytes)) { return false; } + + // Shift ctl, clength off + ws.rQshiftBytes(1 + clength[0]); + + if (raw) { + data = ws.rQshiftBytes(clength[1]); + } else { + data = decompress(ws.rQshiftBytes(clength[1])); + } + + FBU.imgQ.push({ + 'type': 'rgb', + 'img': {'complete': true, 'data': data}, + 'x': FBU.x, + 'y': FBU.y, + 'width': FBU.width, + 'height': FBU.height}); + return true; + } + + ctl = ws.rQpeek8(); + + // Keep tight reset bits + resetStreams = ctl & 0xF; + + // Figure out filter + ctl = ctl >> 4; + streamId = ctl & 0x3; + + if (ctl === 0x08) cmode = "fill"; + else if (ctl === 0x09) cmode = "jpeg"; + else if (ctl === 0x0A) cmode = "png"; + else if (ctl & 0x04) cmode = "filter"; + else if (ctl < 0x04) cmode = "copy"; + else throw("Illegal tight compression received, ctl: " + ctl); + + if (isTightPNG && (cmode === "filter" || cmode === "copy")) { + throw("filter/copy received in tightPNG mode"); + } + + switch (cmode) { + // fill uses fb_depth because TPIXELs drop the padding byte + case "fill": FBU.bytes += fb_depth; break; // TPIXEL + case "jpeg": FBU.bytes += 3; break; // max clength + case "png": FBU.bytes += 3; break; // max clength + case "filter": FBU.bytes += 2; break; // filter id + num colors if palette + case "copy": break; + } + + if (ws.rQwait("TIGHT " + cmode, FBU.bytes)) { return false; } + + //Util.Debug(" ws.rQslice(0,20): " + ws.rQslice(0,20) + " (" + ws.rQlen() + ")"); + //Util.Debug(" cmode: " + cmode); + + // Determine FBU.bytes + switch (cmode) { + case "fill": + ws.rQshift8(); // shift off ctl + color = ws.rQshiftBytes(fb_depth); + FBU.imgQ.push({ + 'type': 'fill', + 'img': {'complete': true}, + 'x': FBU.x, + 'y': FBU.y, + 'width': FBU.width, + 'height': FBU.height, + 'color': [color[2], color[1], color[0]] }); + break; + case "png": + case "jpeg": + clength = getTightCLength(ws.rQslice(1, 4)); + FBU.bytes = 1 + clength[0] + clength[1]; // ctl + clength size + jpeg-data + if (ws.rQwait("TIGHT " + cmode, FBU.bytes)) { return false; } + + // We have everything, render it + //Util.Debug(" jpeg, ws.rQlen(): " + ws.rQlen() + ", clength[0]: " + + // clength[0] + ", clength[1]: " + clength[1]); + ws.rQshiftBytes(1 + clength[0]); // shift off ctl + compact length + img = new Image(); + //img.onload = scan_tight_imgQ; + FBU.imgQ.push({ + 'type': 'img', + 'img': img, + 'x': FBU.x, + 'y': FBU.y}); + img.src = "data:image/" + cmode + + extract_data_uri(ws.rQshiftBytes(clength[1])); + img = null; + break; + case "filter": + filterId = rQ[rQi + 1]; + if (filterId === 1) { + if (!handlePalette()) { return false; } + } else { + // Filter 0, Copy could be valid here, but servers don't send it as an explicit filter + // Filter 2, Gradient is valid but not used if jpeg is enabled + throw("Unsupported tight subencoding received, filter: " + filterId); + } + break; + case "copy": + if (!handleCopy()) { return false; } + break; + } + + FBU.bytes = 0; + FBU.rects -= 1; + //Util.Debug(" ending ws.rQslice(0,20): " + ws.rQslice(0,20) + " (" + ws.rQlen() + ")"); + //Util.Debug("<< display_tight_png"); + return true; +} + +extract_data_uri = function(arr) { + //var i, stra = []; + //for (i=0; i< arr.length; i += 1) { + // stra.push(String.fromCharCode(arr[i])); + //} + //return "," + escape(stra.join('')); + return ";base64," + Base64.encode(arr); +}; + +scan_tight_imgQ = function() { + var data, imgQ, ctx; + ctx = display.get_context(); + if (rfb_state === 'normal') { + imgQ = FBU.imgQ; + while ((imgQ.length > 0) && (imgQ[0].img.complete)) { + data = imgQ.shift(); + if (data.type === 'fill') { + display.fillRect(data.x, data.y, data.width, data.height, data.color); + } else if (data.type === 'rgb') { + display.blitRgbImage(data.x, data.y, data.width, data.height, data.img.data, 0); + } else { + ctx.drawImage(data.img, data.x, data.y); + } + } + setTimeout(scan_tight_imgQ, scan_imgQ_rate); + } +}; + +encHandlers.TIGHT = function () { return display_tight(false); }; +encHandlers.TIGHT_PNG = function () { return display_tight(true); }; + +encHandlers.last_rect = function last_rect() { + Util.Debug(">> set_desktopsize"); + FBU.rects = 0; + Util.Debug("<< set_desktopsize"); + return true; +}; + +encHandlers.DesktopSize = function set_desktopsize() { + Util.Debug(">> set_desktopsize"); + fb_width = FBU.width; + fb_height = FBU.height; + display.resize(fb_width, fb_height); + timing.fbu_rt_start = (new Date()).getTime(); + // Send a new non-incremental request + ws.send(fbUpdateRequests()); + + FBU.bytes = 0; + FBU.rects -= 1; + + Util.Debug("<< set_desktopsize"); + return true; +}; + +encHandlers.Cursor = function set_cursor() { + var x, y, w, h, pixelslength, masklength; + //Util.Debug(">> set_cursor"); + x = FBU.x; // hotspot-x + y = FBU.y; // hotspot-y + w = FBU.width; + h = FBU.height; + + pixelslength = w * h * fb_Bpp; + masklength = Math.floor((w + 7) / 8) * h; + + FBU.bytes = pixelslength + masklength; + if (ws.rQwait("cursor encoding", FBU.bytes)) { return false; } + + //Util.Debug(" set_cursor, x: " + x + ", y: " + y + ", w: " + w + ", h: " + h); + + display.changeCursor(ws.rQshiftBytes(pixelslength), + ws.rQshiftBytes(masklength), + x, y, w, h); + + FBU.bytes = 0; + FBU.rects -= 1; + + //Util.Debug("<< set_cursor"); + return true; +}; + +encHandlers.JPEG_quality_lo = function set_jpeg_quality() { + Util.Error("Server sent jpeg_quality pseudo-encoding"); +}; + +encHandlers.compress_lo = function set_compress_level() { + Util.Error("Server sent compress level pseudo-encoding"); +}; + +/* + * Client message routines + */ + +pixelFormat = function() { + //Util.Debug(">> pixelFormat"); + var arr; + arr = [0]; // msg-type + arr.push8(0); // padding + arr.push8(0); // padding + arr.push8(0); // padding + + arr.push8(fb_Bpp * 8); // bits-per-pixel + arr.push8(fb_depth * 8); // depth + arr.push8(0); // little-endian + arr.push8(conf.true_color ? 1 : 0); // true-color + + arr.push16(255); // red-max + arr.push16(255); // green-max + arr.push16(255); // blue-max + arr.push8(16); // red-shift + arr.push8(8); // green-shift + arr.push8(0); // blue-shift + + arr.push8(0); // padding + arr.push8(0); // padding + arr.push8(0); // padding + //Util.Debug("<< pixelFormat"); + return arr; +}; + +clientEncodings = function() { + //Util.Debug(">> clientEncodings"); + var arr, i, encList = []; + + for (i=0; i> fbUpdateRequest"); + if (typeof(x) === "undefined") { x = 0; } + if (typeof(y) === "undefined") { y = 0; } + if (typeof(xw) === "undefined") { xw = fb_width; } + if (typeof(yw) === "undefined") { yw = fb_height; } + var arr; + arr = [3]; // msg-type + arr.push8(incremental); + arr.push16(x); + arr.push16(y); + arr.push16(xw); + arr.push16(yw); + //Util.Debug("<< fbUpdateRequest"); + return arr; +}; + +// Based on clean/dirty areas, generate requests to send +fbUpdateRequests = function() { + var cleanDirty = display.getCleanDirtyReset(), + arr = [], i, cb, db; + + cb = cleanDirty.cleanBox; + if (cb.w > 0 && cb.h > 0) { + // Request incremental for clean box + arr = arr.concat(fbUpdateRequest(1, cb.x, cb.y, cb.w, cb.h)); + } + for (i = 0; i < cleanDirty.dirtyBoxes.length; i++) { + db = cleanDirty.dirtyBoxes[i]; + // Force all (non-incremental for dirty box + arr = arr.concat(fbUpdateRequest(0, db.x, db.y, db.w, db.h)); + } + return arr; +}; + + + +keyEvent = function(keysym, down) { + //Util.Debug(">> keyEvent, keysym: " + keysym + ", down: " + down); + var arr; + arr = [4]; // msg-type + arr.push8(down); + arr.push16(0); + arr.push32(keysym); + //Util.Debug("<< keyEvent"); + return arr; +}; + +pointerEvent = function(x, y) { + //Util.Debug(">> pointerEvent, x,y: " + x + "," + y + + // " , mask: " + mouse_buttonMask); + var arr; + arr = [5]; // msg-type + arr.push8(mouse_buttonMask); + arr.push16(x); + arr.push16(y); + //Util.Debug("<< pointerEvent"); + return arr; +}; + +clientCutText = function(text) { + //Util.Debug(">> clientCutText"); + var arr, i, n; + arr = [6]; // msg-type + arr.push8(0); // padding + arr.push8(0); // padding + arr.push8(0); // padding + arr.push32(text.length); + n = text.length; + for (i=0; i < n; i+=1) { + arr.push(text.charCodeAt(i)); + } + //Util.Debug("<< clientCutText:" + arr); + return arr; +}; + + + +// +// Public API interface functions +// + +that.connect = function(host, port, password, path) { + //Util.Debug(">> connect"); + + rfb_host = host; + rfb_port = port; + rfb_password = (password !== undefined) ? password : ""; + rfb_path = (path !== undefined) ? path : ""; + + if ((!rfb_host) || (!rfb_port)) { + return fail("Must set host and port"); + } + + updateState('connect'); + //Util.Debug("<< connect"); + +}; + +that.disconnect = function() { + //Util.Debug(">> disconnect"); + updateState('disconnect', 'Disconnecting'); + //Util.Debug("<< disconnect"); +}; + +that.sendPassword = function(passwd) { + rfb_password = passwd; + rfb_state = "Authentication"; + setTimeout(init_msg, 1); +}; + +that.sendCtrlAltDel = function() { + if (rfb_state !== "normal" || conf.view_only) { return false; } + Util.Info("Sending Ctrl-Alt-Del"); + var arr = []; + arr = arr.concat(keyEvent(0xFFE3, 1)); // Control + arr = arr.concat(keyEvent(0xFFE9, 1)); // Alt + arr = arr.concat(keyEvent(0xFFFF, 1)); // Delete + arr = arr.concat(keyEvent(0xFFFF, 0)); // Delete + arr = arr.concat(keyEvent(0xFFE9, 0)); // Alt + arr = arr.concat(keyEvent(0xFFE3, 0)); // Control + arr = arr.concat(fbUpdateRequests()); + ws.send(arr); +}; + +// Send a key press. If 'down' is not specified then send a down key +// followed by an up key. +that.sendKey = function(code, down) { + if (rfb_state !== "normal" || conf.view_only) { return false; } + var arr = []; + if (typeof down !== 'undefined') { + Util.Info("Sending key code (" + (down ? "down" : "up") + "): " + code); + arr = arr.concat(keyEvent(code, down ? 1 : 0)); + } else { + Util.Info("Sending key code (down + up): " + code); + arr = arr.concat(keyEvent(code, 1)); + arr = arr.concat(keyEvent(code, 0)); + } + arr = arr.concat(fbUpdateRequests()); + ws.send(arr); +}; + +that.clipboardPasteFrom = function(text) { + if (rfb_state !== "normal") { return; } + //Util.Debug(">> clipboardPasteFrom: " + text.substr(0,40) + "..."); + ws.send(clientCutText(text)); + //Util.Debug("<< clipboardPasteFrom"); +}; + +// Override internal functions for testing +that.testMode = function(override_send) { + test_mode = true; + that.recv_message = ws.testMode(override_send); + + checkEvents = function () { /* Stub Out */ }; + that.connect = function(host, port, password) { + rfb_host = host; + rfb_port = port; + rfb_password = password; + updateState('ProtocolVersion', "Starting VNC handshake"); + }; +}; + + +return constructor(); // Return the public API interface + +} // End of RFB() diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/ui.js b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/ui.js new file mode 100644 index 0000000..eddfa6c --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/ui.js @@ -0,0 +1,653 @@ +/* + * noVNC: HTML5 VNC client + * Copyright (C) 2011 Joel Martin + * Licensed under LGPL-3 (see LICENSE.txt) + * + * See README.md for usage and integration instructions. + */ + +"use strict"; +/*jslint white: false, browser: true */ +/*global window, $D, Util, WebUtil, RFB, Display */ + +var UI = { + +rfb_state : 'loaded', +settingsOpen : false, +connSettingsOpen : false, +clipboardOpen: false, +keyboardVisible: false, + +// Render default UI and initialize settings menu +load: function() { + var html = '', i, sheet, sheets, llevels; + + // Stylesheet selection dropdown + sheet = WebUtil.selectStylesheet(); + sheets = WebUtil.getStylesheets(); + for (i = 0; i < sheets.length; i += 1) { + UI.addOption($D('noVNC_stylesheet'),sheets[i].title, sheets[i].title); + } + + // Logging selection dropdown + llevels = ['error', 'warn', 'info', 'debug']; + for (i = 0; i < llevels.length; i += 1) { + UI.addOption($D('noVNC_logging'),llevels[i], llevels[i]); + } + + // Settings with immediate effects + UI.initSetting('logging', 'warn'); + WebUtil.init_logging(UI.getSetting('logging')); + + UI.initSetting('stylesheet', 'default'); + WebUtil.selectStylesheet(null); + // call twice to get around webkit bug + WebUtil.selectStylesheet(UI.getSetting('stylesheet')); + + /* Populate the controls if defaults are provided in the URL */ + UI.initSetting('host', window.location.hostname); + UI.initSetting('port', window.location.port); + UI.initSetting('password', ''); + UI.initSetting('encrypt', (window.location.protocol === "https:")); + UI.initSetting('true_color', true); + UI.initSetting('cursor', false); + UI.initSetting('shared', true); + UI.initSetting('view_only', false); + UI.initSetting('connectTimeout', 2); + UI.initSetting('path', 'websockify'); + + UI.rfb = RFB({'target': $D('noVNC_canvas'), + 'onUpdateState': UI.updateState, + 'onClipboard': UI.clipReceive}); + UI.updateVisualState(); + + // Unfocus clipboard when over the VNC area + //$D('VNC_screen').onmousemove = function () { + // var keyboard = UI.rfb.get_keyboard(); + // if ((! keyboard) || (! keyboard.get_focused())) { + // $D('VNC_clipboard_text').blur(); + // } + // }; + + // Show mouse selector buttons on touch screen devices + if ('ontouchstart' in document.documentElement) { + // Show mobile buttons + $D('noVNC_mobile_buttons').style.display = "inline"; + UI.setMouseButton(); + // Remove the address bar + setTimeout(function() { window.scrollTo(0, 1); }, 100); + UI.forceSetting('clip', true); + $D('noVNC_clip').disabled = true; + } else { + UI.initSetting('clip', false); + } + + //iOS Safari does not support CSS position:fixed. + //This detects iOS devices and enables javascript workaround. + if ((navigator.userAgent.match(/iPhone/i)) || + (navigator.userAgent.match(/iPod/i)) || + (navigator.userAgent.match(/iPad/i))) { + //UI.setOnscroll(); + //UI.setResize(); + } + + $D('noVNC_host').focus(); + + UI.setViewClip(); + Util.addEvent(window, 'resize', UI.setViewClip); + + Util.addEvent(window, 'beforeunload', function () { + if (UI.rfb_state === 'normal') { + return "You are currently connected."; + } + } ); + + // Show description by default when hosted at for kanaka.github.com + if (location.host === "kanaka.github.com") { + // Open the description dialog + $D('noVNC_description').style.display = "block"; + } else { + // Open the connect panel on first load + UI.toggleConnectPanel(); + } +}, + +// Read form control compatible setting from cookie +getSetting: function(name) { + var val, ctrl = $D('noVNC_' + name); + val = WebUtil.readCookie(name); + if (ctrl.type === 'checkbox') { + if (val.toLowerCase() in {'0':1, 'no':1, 'false':1}) { + val = false; + } else { + val = true; + } + } + return val; +}, + +// Update cookie and form control setting. If value is not set, then +// updates from control to current cookie setting. +updateSetting: function(name, value) { + + var i, ctrl = $D('noVNC_' + name); + // Save the cookie for this session + if (typeof value !== 'undefined') { + WebUtil.createCookie(name, value); + } + + // Update the settings control + value = UI.getSetting(name); + + if (ctrl.type === 'checkbox') { + ctrl.checked = value; + + } else if (typeof ctrl.options !== 'undefined') { + for (i = 0; i < ctrl.options.length; i += 1) { + if (ctrl.options[i].value === value) { + ctrl.selectedIndex = i; + break; + } + } + } else { + /*Weird IE9 error leads to 'null' appearring + in textboxes instead of ''.*/ + if (value === null) { + value = ""; + } + ctrl.value = value; + } +}, + +// Save control setting to cookie +saveSetting: function(name) { + var val, ctrl = $D('noVNC_' + name); + if (ctrl.type === 'checkbox') { + val = ctrl.checked; + } else if (typeof ctrl.options !== 'undefined') { + val = ctrl.options[ctrl.selectedIndex].value; + } else { + val = ctrl.value; + } + WebUtil.createCookie(name, val); + //Util.Debug("Setting saved '" + name + "=" + val + "'"); + return val; +}, + +// Initial page load read/initialization of settings +initSetting: function(name, defVal) { + var val; + + // Check Query string followed by cookie + val = WebUtil.getQueryVar(name); + if (val === null) { + val = WebUtil.readCookie(name, defVal); + } + UI.updateSetting(name, val); + //Util.Debug("Setting '" + name + "' initialized to '" + val + "'"); + return val; +}, + +// Force a setting to be a certain value +forceSetting: function(name, val) { + UI.updateSetting(name, val); + return val; +}, + + +// Show the clipboard panel +toggleClipboardPanel: function() { + // Close the description panel + $D('noVNC_description').style.display = "none"; + //Close settings if open + if (UI.settingsOpen === true) { + UI.settingsApply(); + UI.closeSettingsMenu(); + } + //Close connection settings if open + if (UI.connSettingsOpen === true) { + UI.toggleConnectPanel(); + } + //Toggle Clipboard Panel + if (UI.clipboardOpen === true) { + $D('noVNC_clipboard').style.display = "none"; + $D('clipboardButton').className = "noVNC_status_button"; + UI.clipboardOpen = false; + } else { + $D('noVNC_clipboard').style.display = "block"; + $D('clipboardButton').className = "noVNC_status_button_selected"; + UI.clipboardOpen = true; + } +}, + +// Show the connection settings panel/menu +toggleConnectPanel: function() { + // Close the description panel + $D('noVNC_description').style.display = "none"; + //Close connection settings if open + if (UI.settingsOpen === true) { + UI.settingsApply(); + UI.closeSettingsMenu(); + $D('connectButton').className = "noVNC_status_button"; + } + if (UI.clipboardOpen === true) { + UI.toggleClipboardPanel(); + } + + //Toggle Connection Panel + if (UI.connSettingsOpen === true) { + $D('noVNC_controls').style.display = "none"; + $D('connectButton').className = "noVNC_status_button"; + UI.connSettingsOpen = false; + } else { + $D('noVNC_controls').style.display = "block"; + $D('connectButton').className = "noVNC_status_button_selected"; + UI.connSettingsOpen = true; + $D('noVNC_host').focus(); + } +}, + +// Toggle the settings menu: +// On open, settings are refreshed from saved cookies. +// On close, settings are applied +toggleSettingsPanel: function() { + // Close the description panel + $D('noVNC_description').style.display = "none"; + if (UI.settingsOpen) { + UI.settingsApply(); + UI.closeSettingsMenu(); + } else { + UI.updateSetting('encrypt'); + UI.updateSetting('true_color'); + if (UI.rfb.get_display().get_cursor_uri()) { + UI.updateSetting('cursor'); + } else { + UI.updateSetting('cursor', false); + $D('noVNC_cursor').disabled = true; + } + UI.updateSetting('clip'); + UI.updateSetting('shared'); + UI.updateSetting('view_only'); + UI.updateSetting('connectTimeout'); + UI.updateSetting('path'); + UI.updateSetting('stylesheet'); + UI.updateSetting('logging'); + + UI.openSettingsMenu(); + } +}, + +// Open menu +openSettingsMenu: function() { + // Close the description panel + $D('noVNC_description').style.display = "none"; + if (UI.clipboardOpen === true) { + UI.toggleClipboardPanel(); + } + //Close connection settings if open + if (UI.connSettingsOpen === true) { + UI.toggleConnectPanel(); + } + $D('noVNC_settings').style.display = "block"; + $D('settingsButton').className = "noVNC_status_button_selected"; + UI.settingsOpen = true; +}, + +// Close menu (without applying settings) +closeSettingsMenu: function() { + $D('noVNC_settings').style.display = "none"; + $D('settingsButton').className = "noVNC_status_button"; + UI.settingsOpen = false; +}, + +// Save/apply settings when 'Apply' button is pressed +settingsApply: function() { + //Util.Debug(">> settingsApply"); + UI.saveSetting('encrypt'); + UI.saveSetting('true_color'); + if (UI.rfb.get_display().get_cursor_uri()) { + UI.saveSetting('cursor'); + } + UI.saveSetting('clip'); + UI.saveSetting('shared'); + UI.saveSetting('view_only'); + UI.saveSetting('connectTimeout'); + UI.saveSetting('path'); + UI.saveSetting('stylesheet'); + UI.saveSetting('logging'); + + // Settings with immediate (non-connected related) effect + WebUtil.selectStylesheet(UI.getSetting('stylesheet')); + WebUtil.init_logging(UI.getSetting('logging')); + UI.setViewClip(); + UI.setViewDrag(UI.rfb.get_viewportDrag()); + //Util.Debug("<< settingsApply"); +}, + + + +setPassword: function() { + UI.rfb.sendPassword($D('noVNC_password').value); + //Reset connect button. + $D('noVNC_connect_button').value = "Connect"; + $D('noVNC_connect_button').onclick = UI.Connect; + //Hide connection panel. + UI.toggleConnectPanel(); + return false; +}, + +sendCtrlAltDel: function() { + UI.rfb.sendCtrlAltDel(); +}, + +setMouseButton: function(num) { + var b, blist = [0, 1,2,4], button; + + if (typeof num === 'undefined') { + // Disable mouse buttons + num = -1; + } + if (UI.rfb) { + UI.rfb.get_mouse().set_touchButton(num); + } + + for (b = 0; b < blist.length; b++) { + button = $D('noVNC_mouse_button' + blist[b]); + if (blist[b] === num) { + button.style.display = ""; + } else { + button.style.display = "none"; + /* + button.style.backgroundColor = "black"; + button.style.color = "lightgray"; + button.style.backgroundColor = ""; + button.style.color = ""; + */ + } + } +}, + +updateState: function(rfb, state, oldstate, msg) { + var s, sb, c, d, cad, vd, klass; + UI.rfb_state = state; + s = $D('noVNC_status'); + sb = $D('noVNC_status_bar'); + switch (state) { + case 'failed': + case 'fatal': + klass = "noVNC_status_error"; + break; + case 'normal': + klass = "noVNC_status_normal"; + break; + case 'disconnected': + $D('noVNC_logo').style.display = "block"; + // Fall through + case 'loaded': + klass = "noVNC_status_normal"; + break; + case 'password': + UI.toggleConnectPanel(); + + $D('noVNC_connect_button').value = "Send Password"; + $D('noVNC_connect_button').onclick = UI.setPassword; + $D('noVNC_password').focus(); + + klass = "noVNC_status_warn"; + break; + default: + klass = "noVNC_status_warn"; + break; + } + + if (typeof(msg) !== 'undefined') { + s.setAttribute("class", klass); + sb.setAttribute("class", klass); + s.innerHTML = msg; + } + + UI.updateVisualState(); +}, + +// Disable/enable controls depending on connection state +updateVisualState: function() { + var connected = UI.rfb_state === 'normal' ? true : false; + + //Util.Debug(">> updateVisualState"); + $D('noVNC_encrypt').disabled = connected; + $D('noVNC_true_color').disabled = connected; + if (UI.rfb && UI.rfb.get_display() && + UI.rfb.get_display().get_cursor_uri()) { + $D('noVNC_cursor').disabled = connected; + } else { + UI.updateSetting('cursor', false); + $D('noVNC_cursor').disabled = true; + } + $D('noVNC_shared').disabled = connected; + $D('noVNC_view_only').disabled = connected; + $D('noVNC_connectTimeout').disabled = connected; + $D('noVNC_path').disabled = connected; + + if (connected) { + UI.setViewClip(); + UI.setMouseButton(1); + $D('clipboardButton').style.display = "inline"; + $D('showKeyboard').style.display = "inline"; + $D('sendCtrlAltDelButton').style.display = "inline"; + } else { + UI.setMouseButton(); + $D('clipboardButton').style.display = "none"; + $D('showKeyboard').style.display = "none"; + $D('sendCtrlAltDelButton').style.display = "none"; + } + // State change disables viewport dragging. + // It is enabled (toggled) by direct click on the button + UI.setViewDrag(false); + + switch (UI.rfb_state) { + case 'fatal': + case 'failed': + case 'loaded': + case 'disconnected': + $D('connectButton').style.display = ""; + $D('disconnectButton').style.display = "none"; + break; + default: + $D('connectButton').style.display = "none"; + $D('disconnectButton').style.display = ""; + break; + } + + //Util.Debug("<< updateVisualState"); +}, + + +clipReceive: function(rfb, text) { + Util.Debug(">> UI.clipReceive: " + text.substr(0,40) + "..."); + $D('noVNC_clipboard_text').value = text; + Util.Debug("<< UI.clipReceive"); +}, + + +connect: function() { + var host, port, password, path; + + UI.closeSettingsMenu(); + UI.toggleConnectPanel(); + + host = $D('noVNC_host').value; + port = $D('noVNC_port').value; + password = $D('noVNC_password').value; + path = $D('noVNC_path').value; + if ((!host) || (!port)) { + throw("Must set host and port"); + } + + UI.rfb.set_encrypt(UI.getSetting('encrypt')); + UI.rfb.set_true_color(UI.getSetting('true_color')); + UI.rfb.set_local_cursor(UI.getSetting('cursor')); + UI.rfb.set_shared(UI.getSetting('shared')); + UI.rfb.set_view_only(UI.getSetting('view_only')); + UI.rfb.set_connectTimeout(UI.getSetting('connectTimeout')); + + UI.rfb.connect(host, port, password, path); + //Close dialog. + setTimeout(UI.setBarPosition, 100); + $D('noVNC_logo').style.display = "none"; +}, + +disconnect: function() { + UI.closeSettingsMenu(); + UI.rfb.disconnect(); + + $D('noVNC_logo').style.display = "block"; + UI.connSettingsOpen = false; + UI.toggleConnectPanel(); +}, + +displayBlur: function() { + UI.rfb.get_keyboard().set_focused(false); + UI.rfb.get_mouse().set_focused(false); +}, + +displayFocus: function() { + UI.rfb.get_keyboard().set_focused(true); + UI.rfb.get_mouse().set_focused(true); +}, + +clipClear: function() { + $D('noVNC_clipboard_text').value = ""; + UI.rfb.clipboardPasteFrom(""); +}, + +clipSend: function() { + var text = $D('noVNC_clipboard_text').value; + Util.Debug(">> UI.clipSend: " + text.substr(0,40) + "..."); + UI.rfb.clipboardPasteFrom(text); + Util.Debug("<< UI.clipSend"); +}, + + +// Enable/disable and configure viewport clipping +setViewClip: function(clip) { + var display, cur_clip, pos, new_w, new_h; + + if (UI.rfb) { + display = UI.rfb.get_display(); + } else { + return; + } + + cur_clip = display.get_viewport(); + + if (typeof(clip) !== 'boolean') { + // Use current setting + clip = UI.getSetting('clip'); + } + + if (clip && !cur_clip) { + // Turn clipping on + UI.updateSetting('clip', true); + } else if (!clip && cur_clip) { + // Turn clipping off + UI.updateSetting('clip', false); + display.set_viewport(false); + $D('noVNC_canvas').style.position = 'static'; + display.viewportChange(); + } + if (UI.getSetting('clip')) { + // If clipping, update clipping settings + $D('noVNC_canvas').style.position = 'absolute'; + pos = Util.getPosition($D('noVNC_canvas')); + new_w = window.innerWidth - pos.x; + new_h = window.innerHeight - pos.y; + display.set_viewport(true); + display.viewportChange(0, 0, new_w, new_h); + } +}, + +// Toggle/set/unset the viewport drag/move button +setViewDrag: function(drag) { + var vmb = $D('noVNC_view_drag_button'); + if (!UI.rfb) { return; } + + if (UI.rfb_state === 'normal' && + UI.rfb.get_display().get_viewport()) { + vmb.style.display = "inline"; + } else { + vmb.style.display = "none"; + } + + if (typeof(drag) === "undefined") { + // If not specified, then toggle + drag = !UI.rfb.get_viewportDrag(); + } + if (drag) { + vmb.className = "noVNC_status_button_selected"; + UI.rfb.set_viewportDrag(true); + } else { + vmb.className = "noVNC_status_button"; + UI.rfb.set_viewportDrag(false); + } +}, + +// On touch devices, show the OS keyboard +showKeyboard: function() { + if(UI.keyboardVisible === false) { + $D('keyboardinput').focus(); + UI.keyboardVisible = true; + $D('showKeyboard').className = "noVNC_status_button_selected"; + } else if(UI.keyboardVisible === true) { + $D('keyboardinput').blur(); + $D('showKeyboard').className = "noVNC_status_button"; + UI.keyboardVisible = false; + } +}, + +keyInputBlur: function() { + $D('showKeyboard').className = "noVNC_status_button"; + //Weird bug in iOS if you change keyboardVisible + //here it does not actually occur so next time + //you click keyboard icon it doesnt work. + setTimeout(function() { UI.setKeyboard(); },100); +}, + +setKeyboard: function() { + UI.keyboardVisible = false; +}, + +// iOS < Version 5 does not support position fixed. Javascript workaround: +setOnscroll: function() { + window.onscroll = function() { + UI.setBarPosition(); + }; +}, + +setResize: function () { + window.onResize = function() { + UI.setBarPosition(); + }; +}, + +//Helper to add options to dropdown. +addOption: function(selectbox,text,value ) +{ + var optn = document.createElement("OPTION"); + optn.text = text; + optn.value = value; + selectbox.options.add(optn); +}, + +setBarPosition: function() { + $D('noVNC-control-bar').style.top = (window.pageYOffset) + 'px'; + $D('noVNC_mobile_buttons').style.left = (window.pageXOffset) + 'px'; + + var vncwidth = $D('noVNC_screen').style.offsetWidth; + $D('noVNC-control-bar').style.width = vncwidth + 'px'; +} + +}; + + + + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/util.js b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/util.js new file mode 100644 index 0000000..ddc1914 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/util.js @@ -0,0 +1,303 @@ +/* + * noVNC: HTML5 VNC client + * Copyright (C) 2011 Joel Martin + * Licensed under LGPL-3 (see LICENSE.txt) + * + * See README.md for usage and integration instructions. + */ + +"use strict"; +/*jslint bitwise: false, white: false */ +/*global window, console, document, navigator, ActiveXObject */ + +// Globals defined here +var Util = {}; + + +/* + * Make arrays quack + */ + +Array.prototype.push8 = function (num) { + this.push(num & 0xFF); +}; + +Array.prototype.push16 = function (num) { + this.push((num >> 8) & 0xFF, + (num ) & 0xFF ); +}; +Array.prototype.push32 = function (num) { + this.push((num >> 24) & 0xFF, + (num >> 16) & 0xFF, + (num >> 8) & 0xFF, + (num ) & 0xFF ); +}; + +// IE does not support map (even in IE9) +//This prototype is provided by the Mozilla foundation and +//is distributed under the MIT license. +//http://www.ibiblio.org/pub/Linux/LICENSES/mit.license +if (!Array.prototype.map) +{ + Array.prototype.map = function(fun /*, thisp*/) + { + var len = this.length; + if (typeof fun != "function") + throw new TypeError(); + + var res = new Array(len); + var thisp = arguments[1]; + for (var i = 0; i < len; i++) + { + if (i in this) + res[i] = fun.call(thisp, this[i], i, this); + } + + return res; + }; +} + +/* + * ------------------------------------------------------ + * Namespaced in Util + * ------------------------------------------------------ + */ + +/* + * Logging/debug routines + */ + +Util._log_level = 'warn'; +Util.init_logging = function (level) { + if (typeof level === 'undefined') { + level = Util._log_level; + } else { + Util._log_level = level; + } + if (typeof window.console === "undefined") { + if (typeof window.opera !== "undefined") { + window.console = { + 'log' : window.opera.postError, + 'warn' : window.opera.postError, + 'error': window.opera.postError }; + } else { + window.console = { + 'log' : function(m) {}, + 'warn' : function(m) {}, + 'error': function(m) {}}; + } + } + + Util.Debug = Util.Info = Util.Warn = Util.Error = function (msg) {}; + switch (level) { + case 'debug': Util.Debug = function (msg) { console.log(msg); }; + case 'info': Util.Info = function (msg) { console.log(msg); }; + case 'warn': Util.Warn = function (msg) { console.warn(msg); }; + case 'error': Util.Error = function (msg) { console.error(msg); }; + case 'none': + break; + default: + throw("invalid logging type '" + level + "'"); + } +}; +Util.get_logging = function () { + return Util._log_level; +}; +// Initialize logging level +Util.init_logging(); + + +// Set configuration default for Crockford style function namespaces +Util.conf_default = function(cfg, api, defaults, v, mode, type, defval, desc) { + var getter, setter; + + // Default getter function + getter = function (idx) { + if ((type in {'arr':1, 'array':1}) && + (typeof idx !== 'undefined')) { + return cfg[v][idx]; + } else { + return cfg[v]; + } + }; + + // Default setter function + setter = function (val, idx) { + if (type in {'boolean':1, 'bool':1}) { + if ((!val) || (val in {'0':1, 'no':1, 'false':1})) { + val = false; + } else { + val = true; + } + } else if (type in {'integer':1, 'int':1}) { + val = parseInt(val, 10); + } else if (type === 'func') { + if (!val) { + val = function () {}; + } + } + if (typeof idx !== 'undefined') { + cfg[v][idx] = val; + } else { + cfg[v] = val; + } + }; + + // Set the description + api[v + '_description'] = desc; + + // Set the getter function + if (typeof api['get_' + v] === 'undefined') { + api['get_' + v] = getter; + } + + // Set the setter function with extra sanity checks + if (typeof api['set_' + v] === 'undefined') { + api['set_' + v] = function (val, idx) { + if (mode in {'RO':1, 'ro':1}) { + throw(v + " is read-only"); + } else if ((mode in {'WO':1, 'wo':1}) && + (typeof cfg[v] !== 'undefined')) { + throw(v + " can only be set once"); + } + setter(val, idx); + }; + } + + // Set the default value + if (typeof defaults[v] !== 'undefined') { + defval = defaults[v]; + } else if ((type in {'arr':1, 'array':1}) && + (! (defval instanceof Array))) { + defval = []; + } + // Coerce existing setting to the right type + //Util.Debug("v: " + v + ", defval: " + defval + ", defaults[v]: " + defaults[v]); + setter(defval); +}; + +// Set group of configuration defaults +Util.conf_defaults = function(cfg, api, defaults, arr) { + var i; + for (i = 0; i < arr.length; i++) { + Util.conf_default(cfg, api, defaults, arr[i][0], arr[i][1], + arr[i][2], arr[i][3], arr[i][4]); + } +}; + + +/* + * Cross-browser routines + */ + +// Get DOM element position on page +Util.getPosition = function (obj) { + var x = 0, y = 0; + if (obj.offsetParent) { + do { + x += obj.offsetLeft; + y += obj.offsetTop; + obj = obj.offsetParent; + } while (obj); + } + return {'x': x, 'y': y}; +}; + +// Get mouse event position in DOM element +Util.getEventPosition = function (e, obj, scale) { + var evt, docX, docY, pos; + //if (!e) evt = window.event; + evt = (e ? e : window.event); + evt = (evt.changedTouches ? evt.changedTouches[0] : evt.touches ? evt.touches[0] : evt); + if (evt.pageX || evt.pageY) { + docX = evt.pageX; + docY = evt.pageY; + } else if (evt.clientX || evt.clientY) { + docX = evt.clientX + document.body.scrollLeft + + document.documentElement.scrollLeft; + docY = evt.clientY + document.body.scrollTop + + document.documentElement.scrollTop; + } + pos = Util.getPosition(obj); + if (typeof scale === "undefined") { + scale = 1; + } + return {'x': (docX - pos.x) / scale, 'y': (docY - pos.y) / scale}; +}; + + +// Event registration. Based on: http://www.scottandrew.com/weblog/articles/cbs-events +Util.addEvent = function (obj, evType, fn){ + if (obj.attachEvent){ + var r = obj.attachEvent("on"+evType, fn); + return r; + } else if (obj.addEventListener){ + obj.addEventListener(evType, fn, false); + return true; + } else { + throw("Handler could not be attached"); + } +}; + +Util.removeEvent = function(obj, evType, fn){ + if (obj.detachEvent){ + var r = obj.detachEvent("on"+evType, fn); + return r; + } else if (obj.removeEventListener){ + obj.removeEventListener(evType, fn, false); + return true; + } else { + throw("Handler could not be removed"); + } +}; + +Util.stopEvent = function(e) { + if (e.stopPropagation) { e.stopPropagation(); } + else { e.cancelBubble = true; } + + if (e.preventDefault) { e.preventDefault(); } + else { e.returnValue = false; } +}; + + +// Set browser engine versions. Based on mootools. +Util.Features = {xpath: !!(document.evaluate), air: !!(window.runtime), query: !!(document.querySelector)}; + +Util.Engine = { + // Version detection break in Opera 11.60 (errors on arguments.callee.caller reference) + //'presto': (function() { + // return (!window.opera) ? false : ((arguments.callee.caller) ? 960 : ((document.getElementsByClassName) ? 950 : 925)); }()), + 'presto': (function() { return (!window.opera) ? false : true; }()), + + 'trident': (function() { + return (!window.ActiveXObject) ? false : ((window.XMLHttpRequest) ? ((document.querySelectorAll) ? 6 : 5) : 4); }()), + 'webkit': (function() { + try { return (navigator.taintEnabled) ? false : ((Util.Features.xpath) ? ((Util.Features.query) ? 525 : 420) : 419); } catch (e) { return false; } }()), + //'webkit': (function() { + // return ((typeof navigator.taintEnabled !== "unknown") && navigator.taintEnabled) ? false : ((Util.Features.xpath) ? ((Util.Features.query) ? 525 : 420) : 419); }()), + 'gecko': (function() { + return (!document.getBoxObjectFor && window.mozInnerScreenX == null) ? false : ((document.getElementsByClassName) ? 19 : 18); }()) +}; +if (Util.Engine.webkit) { + // Extract actual webkit version if available + Util.Engine.webkit = (function(v) { + var re = new RegExp('WebKit/([0-9\.]*) '); + v = (navigator.userAgent.match(re) || ['', v])[1]; + return parseFloat(v, 10); + })(Util.Engine.webkit); +} + +Util.Flash = (function(){ + var v, version; + try { + v = navigator.plugins['Shockwave Flash'].description; + } catch(err1) { + try { + v = new ActiveXObject('ShockwaveFlash.ShockwaveFlash').GetVariable('$version'); + } catch(err2) { + v = '0 r0'; + } + } + version = v.match(/\d+/g); + return {version: parseInt(version[0] || 0 + '.' + version[1], 10) || 0, build: parseInt(version[2], 10) || 0}; +}()); diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/vnc.js b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/vnc.js new file mode 100644 index 0000000..2b31f45 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/include/vnc.js @@ -0,0 +1,43 @@ +/* + * noVNC: HTML5 VNC client + * Copyright (C) 2011 Joel Martin + * Licensed under LGPL-3 (see LICENSE.txt) + * + * See README.md for usage and integration instructions. + */ + +/*jslint evil: true */ +/*global window, document, INCLUDE_URI */ + +/* + * Load supporting scripts + */ +function get_INCLUDE_URI() { + return (typeof INCLUDE_URI !== "undefined") ? INCLUDE_URI : "include/"; +} + +(function () { + "use strict"; + + var extra = "", start, end; + + start = " + + + + + +
+ +
+ +
+ + + + + + +
+
+ + +
+ + + + + +
+ + + + + + +
+ +
+ +
+ + +
+ +
    +
  • Encrypt
    • +
  • True Color
    • +
  • Local Cursor
    • +
  • Clip to Window
    • +
  • Shared Mode
    • +
  • View Only
    • +
  • Connect Timeout (s)
    • +
  • Path
    • +
    + +
  • +
    • + + +
  • +
    • +
    +
    • +
+ +
+ + +
+
    +
    • +
    • +
    • +
    • +
+
+ +
+ + +
+
+ +
+
Loading
+
+ +

no
VNC

+ + +
+ + Canvas not supported. + +
+ +
+ + + + diff --git a/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/vnc_auto.html b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/vnc_auto.html new file mode 100644 index 0000000..8d370b5 --- /dev/null +++ b/jni/vnc/LibVNCServer-0.9.9/webclients/novnc/vnc_auto.html @@ -0,0 +1,127 @@ + + + + + noVNC + + + + + + + +
+
+ + + +
Loading
+ +
+
+ + Canvas not supported. + +
+ + + + + + diff --git a/project.properties b/project.properties new file mode 100644 index 0000000..e0a848d --- /dev/null +++ b/project.properties @@ -0,0 +1,14 @@ +# This file is automatically generated by Android Tools. +# Do not modify this file -- YOUR CHANGES WILL BE ERASED! +# +# This file must be checked in Version Control Systems. +# +# To customize properties used by the Ant build system edit +# "ant.properties", and override values to adapt the script to your +# project structure. +# +# To enable ProGuard to shrink and obfuscate your code, uncomment this (available properties: sdk.dir, user.home): +#proguard.config=${sdk.dir}/tools/proguard/proguard-android.txt:proguard-project.txt + +# Project target. +target=Google Inc.:Google APIs:15